iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

dt-bindings: net: micrel-ksz90x1.txt: correct documentation

Browse Source 
Correct the Micrel phy documentation for the ksz9021 and ksz9031 phys
for how the phy skews are set.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Dinh Nguyen 2021-03-24 08:52:19 -05:00 committed by David S. Miller
parent de9c7854e6
commit 3ed14d8d47
1 changed files with 94 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

96
Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
View File

@ -65,6 +65,71 @@ KSZ9031:
step is 60ps. The default value is the neutral setting, so setting
rxc-skew-ps=<0> actually results in -900 picoseconds adjustment.
The KSZ9031 hardware supports a range of skew values from negative to
positive, where the specific range is property dependent. All values
specified in the devicetree are offset by the minimum value so they
can be represented as positive integers in the devicetree since it's
difficult to represent a negative number in the devictree.
The following 5-bit values table apply to rxc-skew-ps and txc-skew-ps.
Pad Skew Value Delay (ps) Devicetree Value
------------------------------------------------------
0_0000 -900ps 0
0_0001 -840ps 60
0_0010 -780ps 120
0_0011 -720ps 180
0_0100 -660ps 240
0_0101 -600ps 300
0_0110 -540ps 360
0_0111 -480ps 420
0_1000 -420ps 480
0_1001 -360ps 540
0_1010 -300ps 600
0_1011 -240ps 660
0_1100 -180ps 720
0_1101 -120ps 780
0_1110 -60ps 840
0_1111 0ps 900
1_0000 60ps 960
1_0001 120ps 1020
1_0010 180ps 1080
1_0011 240ps 1140
1_0100 300ps 1200
1_0101 360ps 1260
1_0110 420ps 1320
1_0111 480ps 1380
1_1000 540ps 1440
1_1001 600ps 1500
1_1010 660ps 1560
1_1011 720ps 1620
1_1100 780ps 1680
1_1101 840ps 1740
1_1110 900ps 1800
1_1111 960ps 1860
The following 4-bit values table apply to the txdX-skew-ps, rxdX-skew-ps
data pads, and the rxdv-skew-ps, txen-skew-ps control pads.
Pad Skew Value Delay (ps) Devicetree Value
------------------------------------------------------
0000 -420ps 0
0001 -360ps 60
0010 -300ps 120
0011 -240ps 180
0100 -180ps 240
0101 -120ps 300
0110 -60ps 360
0111 0ps 420
1000 60ps 480
1001 120ps 540
1010 180ps 600
1011 240ps 660
1100 300ps 720
1101 360ps 780
1110 420ps 840
1111 480ps 900
Optional properties:
Maximum value of 1860, default value 900:
@ -120,11 +185,21 @@ KSZ9131:
Examples:
/* Attach to an Ethernet device with autodetected PHY */
&enet {
rxc-skew-ps = <1800>;
rxdv-skew-ps = <0>;
txc-skew-ps = <1800>;
txen-skew-ps = <0>;
status = "okay";
};
/* Attach to an explicitly-specified PHY */
mdio {
phy0: ethernet-phy@0 {
rxc-skew-ps = <3000>;
rxc-skew-ps = <1800>;
rxdv-skew-ps = <0>;
txc-skew-ps = <3000>;
txc-skew-ps = <1800>;
txen-skew-ps = <0>;
reg = <0>;
};
@ -133,3 +208,20 @@ Examples:
phy = <&phy0>;
phy-mode = "rgmii-id";
};
References
Micrel ksz9021rl/rn Data Sheet, Revision 1.2. Dated 2/13/2014.
http://www.micrel.com/_PDF/Ethernet/datasheets/ksz9021rl-rn_ds.pdf
Micrel ksz9031rnx Data Sheet, Revision 2.1. Dated 11/20/2014.
http://www.micrel.com/_PDF/Ethernet/datasheets/KSZ9031RNX.pdf
Notes:
Note that a previous version of the Micrel ksz9021rl/rn Data Sheet
was missing extended register 106 (transmit data pad skews), and
incorrectly specified the ps per step as 200ps/step instead of
120ps/step. The latest update to this document reflects the latest
revision of the Micrel specification even though usage in the kernel
still reflects that incorrect document.