gpio: loongson: add more gpio chip support
This patch was to add loongson 2k0500, 2k2000 and 3a5000 gpio chip driver support and define inten_offset attibute to enable gpio chip interrupt. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This commit is contained in:
parent
1b83a90bd1
commit
3feb70a617
@ -26,6 +26,7 @@ struct loongson_gpio_chip_data {
|
||||
unsigned int conf_offset;
|
||||
unsigned int out_offset;
|
||||
unsigned int in_offset;
|
||||
unsigned int inten_offset;
|
||||
};
|
||||
|
||||
struct loongson_gpio_chip {
|
||||
@ -117,19 +118,29 @@ static void loongson_gpio_set(struct gpio_chip *chip, unsigned int pin, int valu
|
||||
|
||||
static int loongson_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
|
||||
{
|
||||
unsigned int u;
|
||||
struct platform_device *pdev = to_platform_device(chip->parent);
|
||||
struct loongson_gpio_chip *lgpio = to_loongson_gpio_chip(chip);
|
||||
|
||||
if (lgpio->chip_data->mode == BIT_CTRL_MODE) {
|
||||
/* Get the register index from offset then multiply by bytes per register */
|
||||
u = readl(lgpio->reg_base + lgpio->chip_data->inten_offset + (offset / 32) * 4);
|
||||
u |= BIT(offset % 32);
|
||||
writel(u, lgpio->reg_base + lgpio->chip_data->inten_offset + (offset / 32) * 4);
|
||||
} else {
|
||||
writeb(1, lgpio->reg_base + lgpio->chip_data->inten_offset + offset);
|
||||
}
|
||||
|
||||
return platform_get_irq(pdev, offset);
|
||||
}
|
||||
|
||||
static int loongson_gpio_init(struct device *dev, struct loongson_gpio_chip *lgpio,
|
||||
struct device_node *np, void __iomem *reg_base)
|
||||
void __iomem *reg_base)
|
||||
{
|
||||
int ret;
|
||||
u32 ngpios;
|
||||
|
||||
lgpio->reg_base = reg_base;
|
||||
|
||||
if (lgpio->chip_data->mode == BIT_CTRL_MODE) {
|
||||
ret = bgpio_init(&lgpio->chip, dev, 8,
|
||||
lgpio->reg_base + lgpio->chip_data->in_offset,
|
||||
@ -148,14 +159,14 @@ static int loongson_gpio_init(struct device *dev, struct loongson_gpio_chip *lgp
|
||||
lgpio->chip.direction_output = loongson_gpio_direction_output;
|
||||
lgpio->chip.set = loongson_gpio_set;
|
||||
lgpio->chip.parent = dev;
|
||||
device_property_read_u32(dev, "ngpios", &ngpios);
|
||||
lgpio->chip.ngpio = ngpios;
|
||||
spin_lock_init(&lgpio->lock);
|
||||
}
|
||||
|
||||
device_property_read_u32(dev, "ngpios", &ngpios);
|
||||
|
||||
lgpio->chip.can_sleep = 0;
|
||||
lgpio->chip.ngpio = ngpios;
|
||||
lgpio->chip.label = lgpio->chip_data->label;
|
||||
lgpio->chip.can_sleep = false;
|
||||
if (lgpio->chip_data->inten_offset)
|
||||
lgpio->chip.to_irq = loongson_gpio_to_irq;
|
||||
|
||||
return devm_gpiochip_add_data(dev, &lgpio->chip, lgpio);
|
||||
@ -165,7 +176,6 @@ static int loongson_gpio_probe(struct platform_device *pdev)
|
||||
{
|
||||
void __iomem *reg_base;
|
||||
struct loongson_gpio_chip *lgpio;
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
struct device *dev = &pdev->dev;
|
||||
|
||||
lgpio = devm_kzalloc(dev, sizeof(*lgpio), GFP_KERNEL);
|
||||
@ -178,7 +188,7 @@ static int loongson_gpio_probe(struct platform_device *pdev)
|
||||
if (IS_ERR(reg_base))
|
||||
return PTR_ERR(reg_base);
|
||||
|
||||
return loongson_gpio_init(dev, lgpio, np, reg_base);
|
||||
return loongson_gpio_init(dev, lgpio, reg_base);
|
||||
}
|
||||
|
||||
static const struct loongson_gpio_chip_data loongson_gpio_ls2k_data = {
|
||||
@ -187,6 +197,57 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls2k_data = {
|
||||
.conf_offset = 0x0,
|
||||
.in_offset = 0x20,
|
||||
.out_offset = 0x10,
|
||||
.inten_offset = 0x30,
|
||||
};
|
||||
|
||||
static const struct loongson_gpio_chip_data loongson_gpio_ls2k0500_data0 = {
|
||||
.label = "ls2k0500_gpio",
|
||||
.mode = BIT_CTRL_MODE,
|
||||
.conf_offset = 0x0,
|
||||
.in_offset = 0x8,
|
||||
.out_offset = 0x10,
|
||||
.inten_offset = 0xb0,
|
||||
};
|
||||
|
||||
static const struct loongson_gpio_chip_data loongson_gpio_ls2k0500_data1 = {
|
||||
.label = "ls2k0500_gpio",
|
||||
.mode = BIT_CTRL_MODE,
|
||||
.conf_offset = 0x0,
|
||||
.in_offset = 0x8,
|
||||
.out_offset = 0x10,
|
||||
.inten_offset = 0x98,
|
||||
};
|
||||
|
||||
static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data0 = {
|
||||
.label = "ls2k2000_gpio",
|
||||
.mode = BIT_CTRL_MODE,
|
||||
.conf_offset = 0x0,
|
||||
.in_offset = 0xc,
|
||||
.out_offset = 0x8,
|
||||
};
|
||||
|
||||
static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data1 = {
|
||||
.label = "ls2k2000_gpio",
|
||||
.mode = BIT_CTRL_MODE,
|
||||
.conf_offset = 0x0,
|
||||
.in_offset = 0x20,
|
||||
.out_offset = 0x10,
|
||||
};
|
||||
|
||||
static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data2 = {
|
||||
.label = "ls2k2000_gpio",
|
||||
.mode = BIT_CTRL_MODE,
|
||||
.conf_offset = 0x84,
|
||||
.in_offset = 0x88,
|
||||
.out_offset = 0x80,
|
||||
};
|
||||
|
||||
static const struct loongson_gpio_chip_data loongson_gpio_ls3a5000_data = {
|
||||
.label = "ls3a5000_gpio",
|
||||
.mode = BIT_CTRL_MODE,
|
||||
.conf_offset = 0x0,
|
||||
.in_offset = 0xc,
|
||||
.out_offset = 0x8,
|
||||
};
|
||||
|
||||
static const struct loongson_gpio_chip_data loongson_gpio_ls7a_data = {
|
||||
@ -202,6 +263,30 @@ static const struct of_device_id loongson_gpio_of_match[] = {
|
||||
.compatible = "loongson,ls2k-gpio",
|
||||
.data = &loongson_gpio_ls2k_data,
|
||||
},
|
||||
{
|
||||
.compatible = "loongson,ls2k0500-gpio0",
|
||||
.data = &loongson_gpio_ls2k0500_data0,
|
||||
},
|
||||
{
|
||||
.compatible = "loongson,ls2k0500-gpio1",
|
||||
.data = &loongson_gpio_ls2k0500_data1,
|
||||
},
|
||||
{
|
||||
.compatible = "loongson,ls2k2000-gpio0",
|
||||
.data = &loongson_gpio_ls2k2000_data0,
|
||||
},
|
||||
{
|
||||
.compatible = "loongson,ls2k2000-gpio1",
|
||||
.data = &loongson_gpio_ls2k2000_data1,
|
||||
},
|
||||
{
|
||||
.compatible = "loongson,ls2k2000-gpio2",
|
||||
.data = &loongson_gpio_ls2k2000_data2,
|
||||
},
|
||||
{
|
||||
.compatible = "loongson,ls3a5000-gpio",
|
||||
.data = &loongson_gpio_ls3a5000_data,
|
||||
},
|
||||
{
|
||||
.compatible = "loongson,ls7a-gpio",
|
||||
.data = &loongson_gpio_ls7a_data,
|
||||
@ -215,6 +300,22 @@ static const struct acpi_device_id loongson_gpio_acpi_match[] = {
|
||||
.id = "LOON0002",
|
||||
.driver_data = (kernel_ulong_t)&loongson_gpio_ls7a_data,
|
||||
},
|
||||
{
|
||||
.id = "LOON0007",
|
||||
.driver_data = (kernel_ulong_t)&loongson_gpio_ls3a5000_data,
|
||||
},
|
||||
{
|
||||
.id = "LOON000A",
|
||||
.driver_data = (kernel_ulong_t)&loongson_gpio_ls2k2000_data0,
|
||||
},
|
||||
{
|
||||
.id = "LOON000B",
|
||||
.driver_data = (kernel_ulong_t)&loongson_gpio_ls2k2000_data1,
|
||||
},
|
||||
{
|
||||
.id = "LOON000C",
|
||||
.driver_data = (kernel_ulong_t)&loongson_gpio_ls2k2000_data2,
|
||||
},
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(acpi, loongson_gpio_acpi_match);
|
||||
|
Loading…
Reference in New Issue
Block a user