ath9k: Rename AR9480 into AR9462

Renamed to be in sync with Marketing term and to avoid
confusion with other chip names.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Rajkumar Manoharan
2011-10-13 11:00:44 +05:30
committed by John W. Linville
parent 76db2f8c87
commit 423e38e807
14 changed files with 221 additions and 221 deletions

View File

@ -559,7 +559,7 @@ static void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx)
if ((ah->caps.hw_caps & ATH9K_HW_CAP_APM) && (tx == 0x7))
REG_WRITE(ah, AR_SELFGEN_MASK, 0x3);
else if (AR_SREV_9480(ah))
else if (AR_SREV_9462(ah))
/* xxx only when MCI support is enabled */
REG_WRITE(ah, AR_SELFGEN_MASK, 0x3);
else
@ -662,7 +662,7 @@ static int ar9003_hw_process_ini(struct ath_hw *ah,
ar9003_hw_prog_ini(ah, &ah->iniMac[i], modesIndex);
ar9003_hw_prog_ini(ah, &ah->iniBB[i], modesIndex);
ar9003_hw_prog_ini(ah, &ah->iniRadio[i], modesIndex);
if (i == ATH_INI_POST && AR_SREV_9480_20(ah))
if (i == ATH_INI_POST && AR_SREV_9462_20(ah))
ar9003_hw_prog_ini(ah,
&ah->ini_radio_post_sys2ant,
modesIndex);
@ -685,7 +685,7 @@ static int ar9003_hw_process_ini(struct ath_hw *ah,
if (AR_SREV_9340(ah) && !ah->is_clk_25mhz)
REG_WRITE_ARRAY(&ah->iniModesAdditional_40M, 1, regWrites);
if (AR_SREV_9480(ah))
if (AR_SREV_9462(ah))
ar9003_hw_prog_ini(ah, &ah->ini_BTCOEX_MAX_TXPWR, 1);
ah->modes_index = modesIndex;
@ -694,7 +694,7 @@ static int ar9003_hw_process_ini(struct ath_hw *ah,
ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
ath9k_hw_apply_txpower(ah, chan);
if (AR_SREV_9480(ah)) {
if (AR_SREV_9462(ah)) {
if (REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_0,
AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL))
ah->enabled_cals |= TX_IQ_CAL;
@ -1300,7 +1300,7 @@ static int ar9003_hw_fast_chan_change(struct ath_hw *ah,
ar9003_hw_prog_ini(ah, &ah->iniMac[ATH_INI_POST], modesIndex);
ar9003_hw_prog_ini(ah, &ah->iniBB[ATH_INI_POST], modesIndex);
ar9003_hw_prog_ini(ah, &ah->iniRadio[ATH_INI_POST], modesIndex);
if (AR_SREV_9480_20(ah))
if (AR_SREV_9462_20(ah))
ar9003_hw_prog_ini(ah,
&ah->ini_radio_post_sys2ant,
modesIndex);