From 0f45aa84b33b7a9bfeb41845c723dc51f82f1cf0 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 4 Sep 2013 15:20:06 +0530 Subject: [PATCH 001/459] regulator: palmas: fix the n_voltages for smps to 122 With the following change --------- commit ad02e846878ca35e9d3fa584be8ee770e9e14fce Author: Axel Lin regulator: palmas: Return raw register values as the selectors in [get|set]_voltage_sel Don't adjust the selector in [get|set]_voltage_sel, fix it in list_voltage() instead. For smps*(except smps10), the vsel reg-value and voltage mapping as below: ---------- The list_voltage() takes the true value of selector which is programmed in the register. As per smsp voltage table reg-value volt (uV) ( Assume RANGE is x1 ) 0 0 1 500000 2 500000 3 500000 4 500000 5 500000 6 500000 (0.49V + 1 * 0.01V) * RANGE 7 510000 (0.49V + 2 * 0.01V) * RANGE 8 520000 (0.49V + 3 * 0.01V) * RANGE 9 530000 (0.49V + 4 * 0.01V) * RANGE .... 121 1650000 (0.49V + 116 * 0.1) * RANGE Hence making n_voltages for smps to 122. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- drivers/regulator/palmas-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 488dfe7ce9a6..cb65c6f6b0b3 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -207,7 +207,7 @@ static unsigned int palmas_smps_ramp_delay[4] = {0, 10000, 5000, 2500}; * * So they are basically (maxV-minV)/stepV */ -#define PALMAS_SMPS_NUM_VOLTAGES 117 +#define PALMAS_SMPS_NUM_VOLTAGES 122 #define PALMAS_SMPS10_NUM_VOLTAGES 2 #define PALMAS_LDO_NUM_VOLTAGES 50 From 269e4a4122685d0739f0e8e53b440111bf8a03f9 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 4 Sep 2013 13:37:43 +0300 Subject: [PATCH 002/459] spi/pxa2xx: check status register as well to determine if the device is off The current interrupt handler calls pm_runtime_suspended() to check if the device is suspended or not. However, runtime PM status of the device is only set to suspended once all PM runtime suspend hooks have executed. In case of Intel Lynxpoint we have the device bound to the ACPI power domain and its runtime suspend hook will put the device to D3hot (or D3cold if possible). This means that the device is powered off before its state is set to runtime suspended. While in this state the device might get an interrupt that is meant for another device (as the interrupt line is shared), and because the device is powered off accessing its registers will return 0xffffffff that the driver misinterprets as an invalid state. When this happens user will see messages like below on the console: pxa2xx-spi INT33C0:00: bad message state in interrupt handler Fix this by checking the status register for ~0 and returning IRQ_NONE in that case. Signed-off-by: Mika Westerberg Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 2eb06ee0b326..c1a50674c1e3 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -546,8 +546,17 @@ static irqreturn_t ssp_int(int irq, void *dev_id) if (pm_runtime_suspended(&drv_data->pdev->dev)) return IRQ_NONE; - sccr1_reg = read_SSCR1(reg); + /* + * If the device is not yet in RPM suspended state and we get an + * interrupt that is meant for another device, check if status bits + * are all set to one. That means that the device is already + * powered off. + */ status = read_SSSR(reg); + if (status == ~0) + return IRQ_NONE; + + sccr1_reg = read_SSCR1(reg); /* Ignore possible writes if we don't need to write */ if (!(sccr1_reg & SSCR1_TIE)) From 9b4003a687abcf2fe25ba9073dd07345e4529183 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 10 Sep 2013 10:19:29 +0800 Subject: [PATCH 003/459] spi: clps711x: Don't call kfree() after spi_master_put/spi_unregister_master Calling kfree() to clean up the memory obtained from spi_alloc_master() is wrong as this is done in spi_master_release() when spi_master->dev's refcount reaches zero. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/spi/spi-clps711x.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c index 5655acf55bfe..b597a92565dc 100644 --- a/drivers/spi/spi-clps711x.c +++ b/drivers/spi/spi-clps711x.c @@ -247,7 +247,6 @@ err_out: gpio_free(hw->chipselect[i]); spi_master_put(master); - kfree(master); return ret; } @@ -263,7 +262,6 @@ static int spi_clps711x_remove(struct platform_device *pdev) gpio_free(hw->chipselect[i]); spi_unregister_master(master); - kfree(master); return 0; } From 087d30e3049bf86909895ef227f0893b8f710f38 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 10 Sep 2013 16:48:07 +0530 Subject: [PATCH 004/459] regulator: palmas: configure enable time for LDOs As per datasheet (Referred TPS65913), the on-time for LDO is 500micro second. If LDO6 is in vibrator mode then the on-time is 2000us. Set the enable_time on regulator descriptor accordingly. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- drivers/regulator/palmas-regulator.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index cb65c6f6b0b3..fba4faa422b8 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -979,6 +979,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) pmic->desc[id].min_uV = 900000; pmic->desc[id].uV_step = 50000; pmic->desc[id].linear_min_sel = 1; + pmic->desc[id].enable_time = 500; pmic->desc[id].vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, palmas_regs_info[id].vsel_addr); @@ -997,6 +998,11 @@ static int palmas_regulators_probe(struct platform_device *pdev) pmic->desc[id].min_uV = 450000; pmic->desc[id].uV_step = 25000; } + + /* LOD6 in vibrator mode will have enable time 2000us */ + if (pdata && pdata->ldo6_vibrator && + (id == PALMAS_REG_LDO6)) + pmic->desc[id].enable_time = 2000; } else { pmic->desc[id].n_voltages = 1; pmic->desc[id].ops = &palmas_ops_extreg; From e8cb204c675e05105ab2c93c73c57607e09d6b41 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 9 Sep 2013 13:49:26 +0200 Subject: [PATCH 005/459] regulator: da9063: Fix PTR_ERR/ERR_PTR mismatch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_OF=n: drivers/regulator/da9063-regulator.c: In function ‘da9063_parse_regulators_dt’: drivers/regulator/da9063-regulator.c:712: warning: passing argument 1 of ‘PTR_ERR’ makes pointer from integer without a cast drivers/regulator/da9063-regulator.c:712: warning: return makes pointer from integer without a cast Use ERR_PTR() to encode an error code in a pointer. PTR_ERR() is meant to decode an error code from a pointer. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/regulator/da9063-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c index 1a7816390773..b9f2653e4ef9 100644 --- a/drivers/regulator/da9063-regulator.c +++ b/drivers/regulator/da9063-regulator.c @@ -709,7 +709,7 @@ static struct da9063_regulators_pdata *da9063_parse_regulators_dt( struct of_regulator_match **da9063_reg_matches) { da9063_reg_matches = NULL; - return PTR_ERR(-ENODEV); + return ERR_PTR(-ENODEV); } #endif From eadf69cf5e1cdd042fb7b7beeffa538a935373cd Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Sep 2013 19:15:39 +0800 Subject: [PATCH 006/459] spi: mpc512x: fix error return code in mpc512x_psc_spi_do_probe() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-mpc512x-psc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c index dbc5e999a1f5..6adf4e35816d 100644 --- a/drivers/spi/spi-mpc512x-psc.c +++ b/drivers/spi/spi-mpc512x-psc.c @@ -522,8 +522,10 @@ static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr, psc_num = master->bus_num; snprintf(clk_name, sizeof(clk_name), "psc%d_mclk", psc_num); clk = devm_clk_get(dev, clk_name); - if (IS_ERR(clk)) + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); goto free_irq; + } ret = clk_prepare_enable(clk); if (ret) goto free_irq; From 272bfbd54f29b9361b09dbd6b25ccbd1a30163f1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Sep 2013 19:15:08 +0800 Subject: [PATCH 007/459] spi: fix return value check in dspi_probe() In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 6cd07d13ecab..4e44575bd87a 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -476,15 +476,9 @@ static int dspi_probe(struct platform_device *pdev) master->bus_num = bus_num; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "can't get platform resource\n"); - ret = -EINVAL; - goto out_master_put; - } - dspi->base = devm_ioremap_resource(&pdev->dev, res); - if (!dspi->base) { - ret = -EINVAL; + if (IS_ERR(dspi->base)) { + ret = PTR_ERR(dspi->base); goto out_master_put; } From ae10e7e8f1c9d021c8daca750d743cc3baa12e6d Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Fri, 13 Sep 2013 18:09:45 +0100 Subject: [PATCH 008/459] ASoC: core: Only add platform DAI widgets once. Currently platform CPU DAI widgets are created in soc_probe_platform and soc_probe_link_dais. Remove the extra call in soc_probe_link_dais(). Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 4d0561312f3b..1a38be0d0ca8 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1380,7 +1380,6 @@ static int soc_probe_link_dais(struct snd_soc_card *card, int num, int order) return -ENODEV; list_add(&cpu_dai->dapm.list, &card->dapm_list); - snd_soc_dapm_new_dai_widgets(&cpu_dai->dapm, cpu_dai); } if (cpu_dai->driver->probe) { From f8d7b13e14357ed19d2ca2799539600418dc3939 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 13 Sep 2013 10:52:14 +0300 Subject: [PATCH 009/459] ASoC: max98095: a couple array underflows The ->put() function are called from snd_ctl_elem_write() with user supplied data. The limit checks here could underflow leading to a crash. Signed-off-by: Dan Carpenter Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/max98095.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/max98095.c b/sound/soc/codecs/max98095.c index 41cdd1642970..8dbcacd44e6a 100644 --- a/sound/soc/codecs/max98095.c +++ b/sound/soc/codecs/max98095.c @@ -1863,7 +1863,7 @@ static int max98095_put_eq_enum(struct snd_kcontrol *kcontrol, struct max98095_pdata *pdata = max98095->pdata; int channel = max98095_get_eq_channel(kcontrol->id.name); struct max98095_cdata *cdata; - int sel = ucontrol->value.integer.value[0]; + unsigned int sel = ucontrol->value.integer.value[0]; struct max98095_eq_cfg *coef_set; int fs, best, best_val, i; int regmask, regsave; @@ -2016,7 +2016,7 @@ static int max98095_put_bq_enum(struct snd_kcontrol *kcontrol, struct max98095_pdata *pdata = max98095->pdata; int channel = max98095_get_bq_channel(codec, kcontrol->id.name); struct max98095_cdata *cdata; - int sel = ucontrol->value.integer.value[0]; + unsigned int sel = ucontrol->value.integer.value[0]; struct max98095_biquad_cfg *coef_set; int fs, best, best_val, i; int regmask, regsave; From d63733aed90b432e5cc489ddfa28e342f91b4652 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 13 Sep 2013 10:53:36 +0300 Subject: [PATCH 010/459] ASoC: ab8500-codec: info leak in anc_status_control_put() If the user passes an invalid value it leads to an info leak when we print the error message or it could oops. This is called with user supplied data from snd_ctl_elem_write(). Signed-off-by: Dan Carpenter Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/ab8500-codec.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/ab8500-codec.c b/sound/soc/codecs/ab8500-codec.c index b8ba0adacfce..80555d7551e6 100644 --- a/sound/soc/codecs/ab8500-codec.c +++ b/sound/soc/codecs/ab8500-codec.c @@ -1225,13 +1225,18 @@ static int anc_status_control_put(struct snd_kcontrol *kcontrol, struct ab8500_codec_drvdata *drvdata = dev_get_drvdata(codec->dev); struct device *dev = codec->dev; bool apply_fir, apply_iir; - int req, status; + unsigned int req; + int status; dev_dbg(dev, "%s: Enter.\n", __func__); mutex_lock(&drvdata->anc_lock); req = ucontrol->value.integer.value[0]; + if (req >= ARRAY_SIZE(enum_anc_state)) { + status = -EINVAL; + goto cleanup; + } if (req != ANC_APPLY_FIR_IIR && req != ANC_APPLY_FIR && req != ANC_APPLY_IIR) { dev_err(dev, "%s: ERROR: Unsupported status to set '%s'!\n", From d967967e8d1116fb38bad25e58714b5dddd03cca Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 13 Sep 2013 10:52:49 +0300 Subject: [PATCH 011/459] ASoC: 88pm860x: array overflow in snd_soc_put_volsw_2r_st() This is called from snd_ctl_elem_write() with user supplied data so we need to add some bounds checking. Signed-off-by: Dan Carpenter Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/88pm860x-codec.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/codecs/88pm860x-codec.c b/sound/soc/codecs/88pm860x-codec.c index 8af04343cc1a..259d1ac4492f 100644 --- a/sound/soc/codecs/88pm860x-codec.c +++ b/sound/soc/codecs/88pm860x-codec.c @@ -349,6 +349,9 @@ static int snd_soc_put_volsw_2r_st(struct snd_kcontrol *kcontrol, val = ucontrol->value.integer.value[0]; val2 = ucontrol->value.integer.value[1]; + if (val >= ARRAY_SIZE(st_table) || val2 >= ARRAY_SIZE(st_table)) + return -EINVAL; + err = snd_soc_update_bits(codec, reg, 0x3f, st_table[val].m); if (err < 0) return err; From 9c12a831d73dd938a22418d70b39aed4feb4bdf2 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 16 Sep 2013 08:24:26 -0400 Subject: [PATCH 012/459] ext4: fix performance regression in writeback of random writes The Linux Kernel Performance project guys have reported that commit 4e7ea81db5 introduces a performance regression for the following fio workload: [global] direct=0 ioengine=mmap size=1500M bs=4k pre_read=1 numjobs=1 overwrite=1 loops=5 runtime=300 group_reporting invalidate=0 directory=/mnt/ file_service_type=random:36 file_service_type=random:36 [job0] startdelay=0 rw=randrw filename=data0/f1:data0/f2 [job1] startdelay=0 rw=randrw filename=data0/f2:data0/f1 ... [job7] startdelay=0 rw=randrw filename=data0/f2:data0/f1 The culprit of the problem is that after the commit ext4_writepages() are more aggressive in writing back pages. Thus we have less consecutive dirty pages resulting in more seeking. This increased aggressivity is caused by a bug in the condition terminating ext4_writepages(). We start writing from the beginning of the file even if we should have terminated ext4_writepages() because wbc->nr_to_write <= 0. After fixing the condition the throughput of the fio workload is about 20% better than before writeback reorganization. Reported-by: "Yan, Zheng" Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 9115f2807515..4cf2619f007c 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2559,7 +2559,7 @@ retry: break; } blk_finish_plug(&plug); - if (!ret && !cycled) { + if (!ret && !cycled && wbc->nr_to_write > 0) { cycled = 1; mpd.last_page = writeback_index - 1; mpd.first_page = 0; From 0a3658cccdf5326ea508efeb1879b0e2508bb0c3 Mon Sep 17 00:00:00 2001 From: Peng Chen Date: Fri, 30 Aug 2013 17:41:40 +0800 Subject: [PATCH 013/459] Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012. usb device info: T: Bus=06 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 15 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e005 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms Cc: Stable Signed-off-by: Peng Chen Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index a12b923bbaca..0a327f4154a2 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -85,6 +85,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x04CA, 0x3008) }, { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, + { USB_DEVICE(0x0CF3, 0xE005) }, { USB_DEVICE(0x0930, 0x0219) }, { USB_DEVICE(0x0489, 0xe057) }, { USB_DEVICE(0x13d3, 0x3393) }, @@ -126,6 +127,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 8e16f0af6358..e5beb6e0e1f5 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -148,6 +148,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, From f8776218e8546397be64ad2bc0ebf4748522d6e3 Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Wed, 31 Jul 2013 16:25:28 -0300 Subject: [PATCH 014/459] Bluetooth: Fix security level for peripheral role While playing the peripheral role, the host gets a LE Long Term Key Request Event from the controller when a connection is established with a bonded device. The host then informs the LTK which should be used for the connection. Once the link is encrypted, the host gets an Encryption Change Event. Therefore we should set conn->pending_sec_level instead of conn-> sec_level in hci_le_ltk_request_evt. This way, conn->sec_level is properly updated in hci_encrypt_change_evt. Moreover, since we have a LTK associated to the device, we have at least BT_SECURITY_MEDIUM security level. Cc: Stable Signed-off-by: Andre Guedes Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 94aab73f89d4..04967248f899 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -3557,7 +3557,9 @@ static void hci_le_ltk_request_evt(struct hci_dev *hdev, struct sk_buff *skb) cp.handle = cpu_to_le16(conn->handle); if (ltk->authenticated) - conn->sec_level = BT_SECURITY_HIGH; + conn->pending_sec_level = BT_SECURITY_HIGH; + else + conn->pending_sec_level = BT_SECURITY_MEDIUM; hci_send_cmd(hdev, HCI_OP_LE_LTK_REPLY, sizeof(cp), &cp); From 89cbb4da0abee2f39d75f67f9fd57f7410c8b65c Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Wed, 31 Jul 2013 16:25:29 -0300 Subject: [PATCH 015/459] Bluetooth: Fix encryption key size for peripheral role This patch fixes the connection encryption key size information when the host is playing the peripheral role. We should set conn->enc_key_ size in hci_le_ltk_request_evt, otherwise it is left uninitialized. Cc: Stable Signed-off-by: Andre Guedes Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 04967248f899..8db3e89fae35 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -3561,6 +3561,8 @@ static void hci_le_ltk_request_evt(struct hci_dev *hdev, struct sk_buff *skb) else conn->pending_sec_level = BT_SECURITY_MEDIUM; + conn->enc_key_size = ltk->enc_size; + hci_send_cmd(hdev, HCI_OP_LE_LTK_REPLY, sizeof(cp), &cp); if (ltk->type & HCI_SMP_STK) { From 38a172bef8c93ecbfd69715fd88396988e4073fd Mon Sep 17 00:00:00 2001 From: Raphael Kubo da Costa Date: Mon, 2 Sep 2013 14:57:51 +0300 Subject: [PATCH 016/459] Bluetooth: Add support for BCM20702A0 [0b05, 17cb] Yet another vendor specific ID for this chipset; this one for the ASUS USB-BT400 Bluetooth 4.0 adapter. T: Bus=03 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=17cb Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=000272C64400 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Cc: stable@vger.kernel.org Signed-off-by: Raphael Kubo da Costa Signed-off-by: Gustavo Padovan --- drivers/bluetooth/btusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index e5beb6e0e1f5..3221a55dddad 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -102,6 +102,7 @@ static struct usb_device_id btusb_table[] = { /* Broadcom BCM20702A0 */ { USB_DEVICE(0x0b05, 0x17b5) }, + { USB_DEVICE(0x0b05, 0x17cb) }, { USB_DEVICE(0x04ca, 0x2003) }, { USB_DEVICE(0x0489, 0xe042) }, { USB_DEVICE(0x413c, 0x8197) }, From 330b6c1521d76d8b88513fbafe18709ad86dafc4 Mon Sep 17 00:00:00 2001 From: Syam Sidhardhan Date: Tue, 6 Aug 2013 01:59:12 +0900 Subject: [PATCH 017/459] Bluetooth: Fix ACL alive for long in case of non pariable devices For certain devices (ex: HID mouse), support for authentication, pairing and bonding is optional. For such devices, the ACL alive for too long after the L2CAP disconnection. To avoid the ACL alive for too long after L2CAP disconnection, reset the ACL disconnect timeout back to HCI_DISCONN_TIMEOUT during L2CAP connect. While merging the commit id:a9ea3ed9b71cc3271dd59e76f65748adcaa76422 this issue might have introduced. Hcidump info: sh-4.1# /opt/hcidump -Xt 2013-08-05 16:49:00.894129 < ACL data: handle 12 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x004a scid 0x0041 2013-08-05 16:49:00.894195 < HCI Command: Exit Sniff Mode (0x02|0x0004) plen 2 handle 12 2013-08-05 16:49:00.894269 < ACL data: handle 12 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x0049 scid 0x0040 2013-08-05 16:49:00.895645 > HCI Event: Command Status (0x0f) plen 4 Exit Sniff Mode (0x02|0x0004) status 0x00 ncmd 1 2013-08-05 16:49:00.934391 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x00 interval 0 Mode: Active 2013-08-05 16:49:00.936592 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 2 2013-08-05 16:49:00.951577 > ACL data: handle 12 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x004a scid 0x0041 2013-08-05 16:49:00.952820 > ACL data: handle 12 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0049 scid 0x0040 2013-08-05 16:49:00.969165 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x02 interval 50 Mode: Sniff 2013-08-05 16:49:48.175533 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x00 interval 0 Mode: Active 2013-08-05 16:49:48.219045 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x02 interval 108 Mode: Sniff 2013-08-05 16:51:00.968209 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 12 reason 0x13 Reason: Remote User Terminated Connection 2013-08-05 16:51:00.969056 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2013-08-05 16:51:01.013495 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x00 interval 0 Mode: Active 2013-08-05 16:51:01.073777 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 12 reason 0x16 Reason: Connection Terminated by Local Host ============================ After fix ================================ 2013-08-05 16:57:35.986648 < ACL data: handle 11 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x004c scid 0x0041 2013-08-05 16:57:35.986713 < HCI Command: Exit Sniff Mode (0x02|0x0004) plen 2 handle 11 2013-08-05 16:57:35.986785 < ACL data: handle 11 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x004b scid 0x0040 2013-08-05 16:57:35.988110 > HCI Event: Command Status (0x0f) plen 4 Exit Sniff Mode (0x02|0x0004) status 0x00 ncmd 1 2013-08-05 16:57:36.030714 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 11 mode 0x00 interval 0 Mode: Active 2013-08-05 16:57:36.032950 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 11 packets 2 2013-08-05 16:57:36.047926 > ACL data: handle 11 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x004c scid 0x0041 2013-08-05 16:57:36.049200 > ACL data: handle 11 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x004b scid 0x0040 2013-08-05 16:57:36.065509 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 11 mode 0x02 interval 50 Mode: Sniff 2013-08-05 16:57:40.052006 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 11 reason 0x13 Reason: Remote User Terminated Connection 2013-08-05 16:57:40.052869 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2013-08-05 16:57:40.104731 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 11 mode 0x00 interval 0 Mode: Active 2013-08-05 16:57:40.146935 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 11 reason 0x16 Reason: Connection Terminated by Local Host Signed-off-by: Sang-Ki Park Signed-off-by: Chan-yeol Park Signed-off-by: Jaganath Kanakkassery Signed-off-by: Szymon Janc Signed-off-by: Syam Sidhardhan Signed-off-by: Gustavo Padovan --- net/bluetooth/l2cap_core.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index b3bb7bca8e60..63fa11109a1c 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -3755,6 +3755,13 @@ static struct l2cap_chan *l2cap_connect(struct l2cap_conn *conn, sk = chan->sk; + /* For certain devices (ex: HID mouse), support for authentication, + * pairing and bonding is optional. For such devices, inorder to avoid + * the ACL alive for too long after L2CAP disconnection, reset the ACL + * disc_timeout back to HCI_DISCONN_TIMEOUT during L2CAP connect. + */ + conn->hcon->disc_timeout = HCI_DISCONN_TIMEOUT; + bacpy(&bt_sk(sk)->src, conn->src); bacpy(&bt_sk(sk)->dst, conn->dst); chan->psm = psm; From 4f8ec173775fc732075cce78bd2c30660259c14c Mon Sep 17 00:00:00 2001 From: Valentin Ilie Date: Sat, 14 Sep 2013 02:20:37 +0300 Subject: [PATCH 018/459] ASoC: blackfin: Add missing break statement to bf6xx SNDRV_PCM_FORMAT_S8 isn't supposed to fall through to SNDRV_PCM_FORMAT_S16_LE Signed-off-by: Valentin Ilie Signed-off-by: Mark Brown --- sound/soc/blackfin/bf6xx-i2s.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/blackfin/bf6xx-i2s.c b/sound/soc/blackfin/bf6xx-i2s.c index c02405cc007d..5810a0603f2f 100644 --- a/sound/soc/blackfin/bf6xx-i2s.c +++ b/sound/soc/blackfin/bf6xx-i2s.c @@ -88,6 +88,7 @@ static int bfin_i2s_hw_params(struct snd_pcm_substream *substream, case SNDRV_PCM_FORMAT_S8: param.spctl |= 0x70; sport->wdsize = 1; + break; case SNDRV_PCM_FORMAT_S16_LE: param.spctl |= 0xf0; sport->wdsize = 2; From ae3e101286df40cdde49c4737e2868289ed7f35b Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 12 Sep 2013 09:38:12 +0800 Subject: [PATCH 019/459] regulator: palmas: Remove wrong comment for the equation calculating num_voltages Current equation on the comment is wrong. For linear mapping starting from 0, the equation is (maxV-minV)/stepV + 1. Since the linear mapping for PALMAS is not all starting from 0, the equation on the comment is not useful and misleading. Thus remove it. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/palmas-regulator.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index fba4faa422b8..7e2b165972e6 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -201,12 +201,6 @@ static unsigned int palmas_smps_ramp_delay[4] = {0, 10000, 5000, 2500}; #define SMPS_CTRL_MODE_ECO 0x02 #define SMPS_CTRL_MODE_PWM 0x03 -/* These values are derived from the data sheet. And are the number of steps - * where there is a voltage change, the ranges at beginning and end of register - * max/min values where there are no change are ommitted. - * - * So they are basically (maxV-minV)/stepV - */ #define PALMAS_SMPS_NUM_VOLTAGES 122 #define PALMAS_SMPS10_NUM_VOLTAGES 2 #define PALMAS_LDO_NUM_VOLTAGES 50 From d71505b6672c438af37771e92c24c1d73e943f8c Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Wed, 4 Sep 2013 10:32:50 -0400 Subject: [PATCH 020/459] edma: Update author email address Matt's @ti.com address bounces. Update the MODULE_AUTHOR information in edma.c to his Linaro address. Signed-off-by: Josh Boyer Acked-by: Matt Porter Signed-off-by: Vinod Koul --- drivers/dma/edma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index ff50ff4c6a57..098a8da450f0 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -749,6 +749,6 @@ static void __exit edma_exit(void) } module_exit(edma_exit); -MODULE_AUTHOR("Matt Porter "); +MODULE_AUTHOR("Matt Porter "); MODULE_DESCRIPTION("TI EDMA DMA engine driver"); MODULE_LICENSE("GPL v2"); From c2b9e974e6bfef52a250ea57684a6f70e4c8275a Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Wed, 4 Sep 2013 09:32:03 -0400 Subject: [PATCH 021/459] dma/Kconfig: Make TI_EDMA select TI_PRIV_EDMA The TI_EDMA driver unconditionally calls functions provided by the TI_PRIV_EDMA code, but it doesn't force that to be built-in. If that isn't otherwise enabled somewhere, you can get build errors like: linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:593: undefined reference to `edma_free_slot' drivers/built-in.o: In function `edma_terminate_all': linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:169: undefined reference to `edma_stop' drivers/built-in.o: In function `edma_execute': linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:122: undefined reference to `edma_write_slot' linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:149: undefined reference to `edma_link' linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:152: undefined reference to `edma_start' Make TI_EDMA select TI_PRIV_EDMA to avoid this. Signed-off-by: Josh Boyer Acked-by: Matt Porter Signed-off-by: Vinod Koul --- drivers/dma/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 526ec77c7ba0..f238cfd33847 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -198,6 +198,7 @@ config TI_EDMA depends on ARCH_DAVINCI || ARCH_OMAP select DMA_ENGINE select DMA_VIRTUAL_CHANNELS + select TI_PRIV_EDMA default n help Enable support for the TI EDMA controller. This DMA From 7c2330f1afe13b3a934140857bc8060d00103a89 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 16 Sep 2013 18:08:02 -0700 Subject: [PATCH 022/459] regulator: fix fatal kernel-doc error Fix fatal kernel-doc error in : Error(include/linux/regulator/driver.h:52): cannot understand prototype: 'struct regulator_linear_range ' Signed-off-by: Randy Dunlap [Rewrote first line -- broonie] Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 67e13aa5a478..9bdad43ad228 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -40,6 +40,8 @@ enum regulator_status { }; /** + * struct regulator_linear_range - specify linear voltage ranges + * * Specify a range of voltages for regulator_map_linar_range() and * regulator_list_linear_range(). * From faea13b72dbdb77e4d6ad83344596486611708b0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 21 Aug 2013 09:33:30 +0100 Subject: [PATCH 023/459] iommu/arm-smmu: fix a signedness bug Unsigned char is never equal to -1. Cc: Tested-by: Will Deacon Signed-off-by: Dan Carpenter Signed-off-by: Will Deacon --- drivers/iommu/arm-smmu.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index f417e89e1e7e..7243af3b891f 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -377,6 +377,7 @@ struct arm_smmu_cfg { u32 cbar; pgd_t *pgd; }; +#define INVALID_IRPTNDX 0xff #define ARM_SMMU_CB_ASID(cfg) ((cfg)->cbndx) #define ARM_SMMU_CB_VMID(cfg) ((cfg)->cbndx + 1) @@ -840,7 +841,7 @@ static int arm_smmu_init_domain_context(struct iommu_domain *domain, if (IS_ERR_VALUE(ret)) { dev_err(smmu->dev, "failed to request context IRQ %d (%u)\n", root_cfg->irptndx, irq); - root_cfg->irptndx = -1; + root_cfg->irptndx = INVALID_IRPTNDX; goto out_free_context; } @@ -869,7 +870,7 @@ static void arm_smmu_destroy_domain_context(struct iommu_domain *domain) writel_relaxed(0, cb_base + ARM_SMMU_CB_SCTLR); arm_smmu_tlb_inv_context(root_cfg); - if (root_cfg->irptndx != -1) { + if (root_cfg->irptndx != INVALID_IRPTNDX) { irq = smmu->irqs[smmu->num_global_irqs + root_cfg->irptndx]; free_irq(irq, domain); } From 6614ee77f49d37f9bb77eb3e81431ca8fcc4042e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 21 Aug 2013 09:34:20 +0100 Subject: [PATCH 024/459] iommu/arm-smmu: fix iommu_present() test in init The extra semi-colon on the end breaks the test. Cc: Tested-by: Will Deacon Signed-off-by: Dan Carpenter Signed-off-by: Will Deacon --- drivers/iommu/arm-smmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index 7243af3b891f..913bd1565e41 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -1967,10 +1967,10 @@ static int __init arm_smmu_init(void) return ret; /* Oh, for a proper bus abstraction */ - if (!iommu_present(&platform_bus_type)); + if (!iommu_present(&platform_bus_type)) bus_set_iommu(&platform_bus_type, &arm_smmu_ops); - if (!iommu_present(&amba_bustype)); + if (!iommu_present(&amba_bustype)) bus_set_iommu(&amba_bustype, &arm_smmu_ops); return 0; From fd90cecbde065eac6ecc3ef38abace725ad27010 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 21 Aug 2013 13:56:34 +0100 Subject: [PATCH 025/459] iommu/arm-smmu: don't enable SMMU device until probing has completed We currently reset and enable the SMMU before the device has finished being probed, so if we fail later on (for example, because we couldn't request a global irq successfully) then we will leave the device in an active state. This patch delays the reset and enabling of the SMMU hardware until probing has completed. Cc: Signed-off-by: Will Deacon --- drivers/iommu/arm-smmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index 913bd1565e41..181c9ba929cd 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -1858,8 +1858,6 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev) goto out_put_parent; } - arm_smmu_device_reset(smmu); - for (i = 0; i < smmu->num_global_irqs; ++i) { err = request_irq(smmu->irqs[i], arm_smmu_global_fault, @@ -1877,6 +1875,8 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev) spin_lock(&arm_smmu_devices_lock); list_add(&smmu->list, &arm_smmu_devices); spin_unlock(&arm_smmu_devices_lock); + + arm_smmu_device_reset(smmu); return 0; out_free_irqs: From cfd29aa0e81b791985e8428e6507e80e074e6730 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 10 Sep 2013 12:50:48 +0200 Subject: [PATCH 026/459] serial: tegra: fix tty-kref leak Fix potential tty-kref leak in stop_rx path. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Tested-by: Stephen Warren Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial-tegra.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index d0d972f7e43e..0489a2bdcdf9 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -732,7 +732,7 @@ static irqreturn_t tegra_uart_isr(int irq, void *data) static void tegra_uart_stop_rx(struct uart_port *u) { struct tegra_uart_port *tup = to_tegra_uport(u); - struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port); + struct tty_struct *tty; struct tty_port *port = &u->state->port; struct dma_tx_state state; unsigned long ier; @@ -744,6 +744,8 @@ static void tegra_uart_stop_rx(struct uart_port *u) if (!tup->rx_in_progress) return; + tty = tty_port_tty_get(&tup->uport.state->port); + tegra_uart_wait_sym_time(tup, 1); /* wait a character interval */ ier = tup->ier_shadow; From fc0919c68cb2f75bb1af759315f9d7e2a9443c28 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 10 Sep 2013 12:50:49 +0200 Subject: [PATCH 027/459] serial: pch_uart: fix tty-kref leak in rx-error path Fix tty-kref leak introduced by commit 384e301e ("pch_uart: fix a deadlock when pch_uart as console") which never put its tty reference. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 52379e56a31e..f0161d6ccc5c 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1098,6 +1098,8 @@ static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr) if (tty == NULL) { for (i = 0; error_msg[i] != NULL; i++) dev_err(&priv->pdev->dev, error_msg[i]); + } else { + tty_kref_put(tty); } } From 19b85cfb190eb9980eaf416bff96aef4159a430e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 10 Sep 2013 12:50:50 +0200 Subject: [PATCH 028/459] serial: pch_uart: fix tty-kref leak in dma-rx path Fix tty_kref leak when tty_buffer_request room fails in dma-rx path. Note that the tty ref isn't really needed anymore, but as the leak has always been there, fixing it before removing should makes it easier to backport the fix. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index f0161d6ccc5c..2c5a3e4a17db 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -685,11 +685,12 @@ static int dma_push_rx(struct eg20t_port *priv, int size) dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", size - room); if (!room) - return room; + goto out; tty_insert_flip_string(tport, sg_virt(&priv->sg_rx), size); port->icount.rx += room; +out: tty_kref_put(tty); return room; From 0b53861230729f60a4a02a838fb51a2345b16f71 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 10 Sep 2013 12:50:51 +0200 Subject: [PATCH 029/459] serial: pch_uart: remove unnecessary tty_port_tty_get Remove unused tty-reference from dma-rx path which was left after the recent tty-port conversions. Also remove a redundant port initialisation while at it. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 2c5a3e4a17db..44077c0b7670 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -667,31 +667,21 @@ static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf) static int dma_push_rx(struct eg20t_port *priv, int size) { - struct tty_struct *tty; int room; struct uart_port *port = &priv->port; struct tty_port *tport = &port->state->port; - port = &priv->port; - tty = tty_port_tty_get(tport); - if (!tty) { - dev_dbg(priv->port.dev, "%s:tty is busy now", __func__); - return 0; - } - room = tty_buffer_request_room(tport, size); if (room < size) dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", size - room); if (!room) - goto out; + return 0; tty_insert_flip_string(tport, sg_virt(&priv->sg_rx), size); port->icount.rx += room; -out: - tty_kref_put(tty); return room; } From 93a8d4163ecd3fd8aac264707f1d497f193ea88d Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Tue, 17 Sep 2013 12:34:14 -0400 Subject: [PATCH 030/459] n_tty: Fix EOF push index when termios changes Commit 40d5e0905a03601d40cd4e46b8690093c2355d03, 'n_tty: Fix EOF push handling' introduced a subtle state change error wrt EOF push handling when the termios is changed from non-canonical to canonical mode. Reset line_start to the current read_tail index, not 0. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index c9a9ddd1d0bc..01bf5eb4f238 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1758,8 +1758,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON; if (canon_change) { bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE); - ldata->line_start = 0; - ldata->canon_head = ldata->read_tail; + ldata->line_start = ldata->canon_head = ldata->read_tail; ldata->erasing = 0; ldata->lnext = 0; } From 1374a430f81a67c5c594c3f3c84c58845ed7caec Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Tue, 17 Sep 2013 12:43:13 -0500 Subject: [PATCH 031/459] usb: musb: fix otg default state Right after the musb_hdrc driver is loaded, the otg default state is a_idle, and Mode=Host, which are set by musb_host_setup(). This causes the following kernel message during musb gadget enumeration. CAUTION: musb: Babble Interrupt Occurred This patch sets the otg default state to b_idle, and its Mode to Peripheral. It has been validated on TI AM335x GP EVM USB0 port with g_zero. Signed-off-by: Bin Liu Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_gadget.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 9a08679d204d..58c029f1e74c 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1790,6 +1790,10 @@ int musb_gadget_setup(struct musb *musb) musb->g.max_speed = USB_SPEED_HIGH; musb->g.speed = USB_SPEED_UNKNOWN; + MUSB_DEV_MODE(musb); + musb->xceiv->otg->default_a = 0; + musb->xceiv->state = OTG_STATE_B_IDLE; + /* this "gadget" abstracts/virtualizes the controller */ musb->g.name = musb_driver_name; musb->g.is_otg = 1; From bde52788bdb755b9e4b75db6c434f30e32a0ca0b Mon Sep 17 00:00:00 2001 From: Maxim Patlasov Date: Fri, 13 Sep 2013 19:19:54 +0400 Subject: [PATCH 032/459] fuse: wait for writeback in fuse_file_fallocate() The patch fixes a race between mmap-ed write and fallocate(PUNCH_HOLE): 1) An user makes a page dirty via mmap-ed write. 2) The user performs fallocate(2) with mode == PUNCH_HOLE|KEEP_SIZE and covering the page. 3) Before truncate_pagecache_range call from fuse_file_fallocate, the page goes to write-back. The page is fully processed by fuse_writepage (including end_page_writeback on the page), but fuse_flush_writepages did nothing because fi->writectr < 0. 4) truncate_pagecache_range is called and fuse_file_fallocate is finishing by calling fuse_release_nowrite. The latter triggers processing queued write-back request which will write stale data to the hole soon. Changed in v2 (thanks to Brian for suggestion): - Do not truncate page cache until FUSE_FALLOCATE succeeded. Otherwise, we can end up in returning -ENOTSUPP while user data is already punched from page cache. Use filemap_write_and_wait_range() instead. Changed in v3 (thanks to Miklos for suggestion): - fuse_wait_on_writeback() is prone to livelocks; use fuse_set_nowrite() instead. So far as we need a dirty-page barrier only, fuse_sync_writes() should be enough. - rebased to for-linus branch of fuse.git Signed-off-by: Maxim Patlasov Signed-off-by: Miklos Szeredi Cc: stable@vger.kernel.org --- fs/fuse/file.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index d409deafc67b..f9f07c4fa517 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2484,8 +2484,15 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, if (lock_inode) { mutex_lock(&inode->i_mutex); - if (mode & FALLOC_FL_PUNCH_HOLE) - fuse_set_nowrite(inode); + if (mode & FALLOC_FL_PUNCH_HOLE) { + loff_t endbyte = offset + length - 1; + err = filemap_write_and_wait_range(inode->i_mapping, + offset, endbyte); + if (err) + goto out; + + fuse_sync_writes(inode); + } } req = fuse_get_req_nopages(fc); @@ -2520,11 +2527,8 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, fuse_invalidate_attr(inode); out: - if (lock_inode) { - if (mode & FALLOC_FL_PUNCH_HOLE) - fuse_release_nowrite(inode); + if (lock_inode) mutex_unlock(&inode->i_mutex); - } return err; } From 0ab08f576b9e6a6b689fc6b4e632079b978e619b Mon Sep 17 00:00:00 2001 From: Maxim Patlasov Date: Fri, 13 Sep 2013 19:20:16 +0400 Subject: [PATCH 033/459] fuse: fix fallocate vs. ftruncate race A former patch introducing FUSE_I_SIZE_UNSTABLE flag provided detailed description of races between ftruncate and anyone who can extend i_size: > 1. As in the previous scenario fuse_dentry_revalidate() discovered that i_size > changed (due to our own fuse_do_setattr()) and is going to call > truncate_pagecache() for some 'new_size' it believes valid right now. But by > the time that particular truncate_pagecache() is called ... > 2. fuse_do_setattr() returns (either having called truncate_pagecache() or > not -- it doesn't matter). > 3. The file is extended either by write(2) or ftruncate(2) or fallocate(2). > 4. mmap-ed write makes a page in the extended region dirty. This patch adds necessary bits to fuse_file_fallocate() to protect from that race. Signed-off-by: Maxim Patlasov Signed-off-by: Miklos Szeredi Cc: stable@vger.kernel.org --- fs/fuse/file.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index f9f07c4fa517..4598345ab87d 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2467,6 +2467,7 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, { struct fuse_file *ff = file->private_data; struct inode *inode = file->f_inode; + struct fuse_inode *fi = get_fuse_inode(inode); struct fuse_conn *fc = ff->fc; struct fuse_req *req; struct fuse_fallocate_in inarg = { @@ -2495,6 +2496,9 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, } } + if (!(mode & FALLOC_FL_KEEP_SIZE)) + set_bit(FUSE_I_SIZE_UNSTABLE, &fi->state); + req = fuse_get_req_nopages(fc); if (IS_ERR(req)) { err = PTR_ERR(req); @@ -2527,6 +2531,9 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, fuse_invalidate_attr(inode); out: + if (!(mode & FALLOC_FL_KEEP_SIZE)) + clear_bit(FUSE_I_SIZE_UNSTABLE, &fi->state); + if (lock_inode) mutex_unlock(&inode->i_mutex); From 54afa99057ee2ffd3df0f5e891298bbbb65ea63c Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 4 Sep 2013 17:10:39 +0000 Subject: [PATCH 034/459] CIFS: FS-Cache: Uncache unread pages in cifs_readpages() before freeing them In cifs_readpages(), we may decide we don't want to read a page after all - but the page may already have passed through fscache_read_or_alloc_pages() and thus have marks and reservations set. Thus we have to call fscache_readpages_cancel() or fscache_uncache_page() on the pages we're returning to clear the marks. NFS, AFS and 9P should be unaffected by this as they call read_cache_pages() which does the cleanup for you. Signed-off-by: David Howells Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/file.c | 8 ++++++++ fs/cifs/fscache.c | 7 +++++++ fs/cifs/fscache.h | 13 +++++++++++++ 3 files changed, 28 insertions(+) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index eb955b525e55..7ddddf2e2504 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -3254,6 +3254,9 @@ static int cifs_readpages(struct file *file, struct address_space *mapping, /* * Reads as many pages as possible from fscache. Returns -ENOBUFS * immediately if the cookie is negative + * + * After this point, every page in the list might have PG_fscache set, + * so we will need to clean that up off of every page we don't use. */ rc = cifs_readpages_from_fscache(mapping->host, mapping, page_list, &num_pages); @@ -3376,6 +3379,11 @@ static int cifs_readpages(struct file *file, struct address_space *mapping, kref_put(&rdata->refcount, cifs_readdata_release); } + /* Any pages that have been shown to fscache but didn't get added to + * the pagecache must be uncached before they get returned to the + * allocator. + */ + cifs_fscache_readpages_cancel(mapping->host, page_list); return rc; } diff --git a/fs/cifs/fscache.c b/fs/cifs/fscache.c index 2f4bc5a58054..b3258f35e88a 100644 --- a/fs/cifs/fscache.c +++ b/fs/cifs/fscache.c @@ -223,6 +223,13 @@ void __cifs_readpage_to_fscache(struct inode *inode, struct page *page) fscache_uncache_page(CIFS_I(inode)->fscache, page); } +void __cifs_fscache_readpages_cancel(struct inode *inode, struct list_head *pages) +{ + cifs_dbg(FYI, "%s: (fsc: %p, i: %p)\n", + __func__, CIFS_I(inode)->fscache, inode); + fscache_readpages_cancel(CIFS_I(inode)->fscache, pages); +} + void __cifs_fscache_invalidate_page(struct page *page, struct inode *inode) { struct cifsInodeInfo *cifsi = CIFS_I(inode); diff --git a/fs/cifs/fscache.h b/fs/cifs/fscache.h index 63539323e0b9..24794b6cd8ec 100644 --- a/fs/cifs/fscache.h +++ b/fs/cifs/fscache.h @@ -54,6 +54,7 @@ extern int __cifs_readpages_from_fscache(struct inode *, struct address_space *, struct list_head *, unsigned *); +extern void __cifs_fscache_readpages_cancel(struct inode *, struct list_head *); extern void __cifs_readpage_to_fscache(struct inode *, struct page *); @@ -91,6 +92,13 @@ static inline void cifs_readpage_to_fscache(struct inode *inode, __cifs_readpage_to_fscache(inode, page); } +static inline void cifs_fscache_readpages_cancel(struct inode *inode, + struct list_head *pages) +{ + if (CIFS_I(inode)->fscache) + return __cifs_fscache_readpages_cancel(inode, pages); +} + #else /* CONFIG_CIFS_FSCACHE */ static inline int cifs_fscache_register(void) { return 0; } static inline void cifs_fscache_unregister(void) {} @@ -131,6 +139,11 @@ static inline int cifs_readpages_from_fscache(struct inode *inode, static inline void cifs_readpage_to_fscache(struct inode *inode, struct page *page) {} +static inline void cifs_fscache_readpages_cancel(struct inode *inode, + struct list_head *pages) +{ +} + #endif /* CONFIG_CIFS_FSCACHE */ #endif /* _CIFS_FSCACHE_H */ From 9ae6cf606a33b0a762798df0fb742848bcc685b5 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 16 Sep 2013 11:23:45 -0400 Subject: [PATCH 035/459] cifs: stop trying to use virtual circuits Currently, we try to ensure that we use vcnum of 0 on the first established session on a connection and then try to use a different vcnum on each session after that. This is a little odd, since there's no real reason to use a different vcnum for each SMB session. I can only assume there was some confusion between SMB sessions and VCs. That's somewhat understandable since they both get created during SESSION_SETUP, but the documentation indicates that they are really orthogonal. The comment on max_vcs in particular looks quite misguided. An SMB session is already uniquely identified by the SMB UID value -- there's no need to again uniquely ID with a VC. Furthermore, a vcnum of 0 is a cue to the server that it should release any resources that were previously held by the client. This sounds like a good thing, until you consider that: a) it totally ignores the fact that other programs on the box (e.g. smbclient) might have connections established to the server. Using a vcnum of 0 causes them to get kicked off. b) it causes problems with NAT. If several clients are connected to the same server via the same NAT'ed address, whenever one connects to the server it kicks off all the others, which then reconnect and kick off the first one...ad nauseum. I don't see any reason to ignore the advice in "Implementing CIFS" which has a comprehensive treatment of virtual circuits. In there, it states "...and contrary to the specs the client should always use a VcNumber of one, never zero." Have the client just use a hardcoded vcnum of 1, and stop abusing the special behavior of vcnum 0. Reported-by: Sauron99@gmx.de Signed-off-by: Jeff Layton Reviewed-by: Volker Lendecke Signed-off-by: Steve French --- fs/cifs/cifsglob.h | 4 --- fs/cifs/cifssmb.c | 1 - fs/cifs/sess.c | 84 +--------------------------------------------- 3 files changed, 1 insertion(+), 88 deletions(-) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index cfa14c80ef3b..9c72be6fb0df 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -547,9 +547,6 @@ struct TCP_Server_Info { unsigned int max_rw; /* maxRw specifies the maximum */ /* message size the server can send or receive for */ /* SMB_COM_WRITE_RAW or SMB_COM_READ_RAW. */ - unsigned int max_vcs; /* maximum number of smb sessions, at least - those that can be specified uniquely with - vcnumbers */ unsigned int capabilities; /* selective disabling of caps by smb sess */ int timeAdj; /* Adjust for difference in server time zone in sec */ __u64 CurrentMid; /* multiplex id - rotating counter */ @@ -715,7 +712,6 @@ struct cifs_ses { enum statusEnum status; unsigned overrideSecFlg; /* if non-zero override global sec flags */ __u16 ipc_tid; /* special tid for connection to IPC share */ - __u16 vcnum; char *serverOS; /* name of operating system underlying server */ char *serverNOS; /* name of network operating system of server */ char *serverDomain; /* security realm of server */ diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index a3d74fea1623..4baf35949b51 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -463,7 +463,6 @@ decode_lanman_negprot_rsp(struct TCP_Server_Info *server, NEGOTIATE_RSP *pSMBr) cifs_max_pending); set_credits(server, server->maxReq); server->maxBuf = le16_to_cpu(rsp->MaxBufSize); - server->max_vcs = le16_to_cpu(rsp->MaxNumberVcs); /* even though we do not use raw we might as well set this accurately, in case we ever find a need for it */ if ((le16_to_cpu(rsp->RawMode) & RAW_ENABLE) == RAW_ENABLE) { diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index 5f99b7f19e78..352358de1d7e 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -32,88 +32,6 @@ #include #include "cifs_spnego.h" -/* - * Checks if this is the first smb session to be reconnected after - * the socket has been reestablished (so we know whether to use vc 0). - * Called while holding the cifs_tcp_ses_lock, so do not block - */ -static bool is_first_ses_reconnect(struct cifs_ses *ses) -{ - struct list_head *tmp; - struct cifs_ses *tmp_ses; - - list_for_each(tmp, &ses->server->smb_ses_list) { - tmp_ses = list_entry(tmp, struct cifs_ses, - smb_ses_list); - if (tmp_ses->need_reconnect == false) - return false; - } - /* could not find a session that was already connected, - this must be the first one we are reconnecting */ - return true; -} - -/* - * vc number 0 is treated specially by some servers, and should be the - * first one we request. After that we can use vcnumbers up to maxvcs, - * one for each smb session (some Windows versions set maxvcs incorrectly - * so maxvc=1 can be ignored). If we have too many vcs, we can reuse - * any vc but zero (some servers reset the connection on vcnum zero) - * - */ -static __le16 get_next_vcnum(struct cifs_ses *ses) -{ - __u16 vcnum = 0; - struct list_head *tmp; - struct cifs_ses *tmp_ses; - __u16 max_vcs = ses->server->max_vcs; - __u16 i; - int free_vc_found = 0; - - /* Quoting the MS-SMB specification: "Windows-based SMB servers set this - field to one but do not enforce this limit, which allows an SMB client - to establish more virtual circuits than allowed by this value ... but - other server implementations can enforce this limit." */ - if (max_vcs < 2) - max_vcs = 0xFFFF; - - spin_lock(&cifs_tcp_ses_lock); - if ((ses->need_reconnect) && is_first_ses_reconnect(ses)) - goto get_vc_num_exit; /* vcnum will be zero */ - for (i = ses->server->srv_count - 1; i < max_vcs; i++) { - if (i == 0) /* this is the only connection, use vc 0 */ - break; - - free_vc_found = 1; - - list_for_each(tmp, &ses->server->smb_ses_list) { - tmp_ses = list_entry(tmp, struct cifs_ses, - smb_ses_list); - if (tmp_ses->vcnum == i) { - free_vc_found = 0; - break; /* found duplicate, try next vcnum */ - } - } - if (free_vc_found) - break; /* we found a vcnumber that will work - use it */ - } - - if (i == 0) - vcnum = 0; /* for most common case, ie if one smb session, use - vc zero. Also for case when no free vcnum, zero - is safest to send (some clients only send zero) */ - else if (free_vc_found == 0) - vcnum = 1; /* we can not reuse vc=0 safely, since some servers - reset all uids on that, but 1 is ok. */ - else - vcnum = i; - ses->vcnum = vcnum; -get_vc_num_exit: - spin_unlock(&cifs_tcp_ses_lock); - - return cpu_to_le16(vcnum); -} - static __u32 cifs_ssetup_hdr(struct cifs_ses *ses, SESSION_SETUP_ANDX *pSMB) { __u32 capabilities = 0; @@ -128,7 +46,7 @@ static __u32 cifs_ssetup_hdr(struct cifs_ses *ses, SESSION_SETUP_ANDX *pSMB) CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4, USHRT_MAX)); pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq); - pSMB->req.VcNumber = get_next_vcnum(ses); + pSMB->req.VcNumber = __constant_cpu_to_le16(1); /* Now no need to set SMBFLG_CASELESS or obsolete CANONICAL PATH */ From abe511ac85de60f6d6ce1272b91c079d73bf8517 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Tue, 27 Aug 2013 12:41:14 +0800 Subject: [PATCH 036/459] ARM: mvebu: add missing of_node_put() to fix reference leak Add of_node_put to properly decrement the refcount when we are done using a given node. Signed-off-by: Jisheng Zhang Reviewed-by: Ezequiel Garcia Signed-off-by: Jason Cooper Conflicts: arch/arm/mach-mvebu/armada-370-xp.c arch/arm/mach-mvebu/platsmp.c --- arch/arm/mach-mvebu/coherency.c | 8 +++++++- arch/arm/mach-mvebu/pmsu.c | 1 + arch/arm/mach-mvebu/system-controller.c | 1 + 3 files changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 4c24303ec481..58adf2fd9cfc 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -140,6 +140,7 @@ int __init coherency_init(void) coherency_base = of_iomap(np, 0); coherency_cpu_base = of_iomap(np, 1); set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); + of_node_put(np); } return 0; @@ -147,9 +148,14 @@ int __init coherency_init(void) static int __init coherency_late_init(void) { - if (of_find_matching_node(NULL, of_coherency_table)) + struct device_node *np; + + np = of_find_matching_node(NULL, of_coherency_table); + if (np) { bus_register_notifier(&platform_bus_type, &mvebu_hwcc_platform_nb); + of_node_put(np); + } return 0; } diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 3cc4bef6401c..27fc4f049474 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -67,6 +67,7 @@ int __init armada_370_xp_pmsu_init(void) pr_info("Initializing Power Management Service Unit\n"); pmsu_mp_base = of_iomap(np, 0); pmsu_reset_base = of_iomap(np, 1); + of_node_put(np); } return 0; diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c index f875124ff4f9..5175083cdb34 100644 --- a/arch/arm/mach-mvebu/system-controller.c +++ b/arch/arm/mach-mvebu/system-controller.c @@ -98,6 +98,7 @@ static int __init mvebu_system_controller_init(void) BUG_ON(!match); system_controller_base = of_iomap(np, 0); mvebu_sc = (struct mvebu_system_controller *)match->data; + of_node_put(np); } return 0; From 4ec7fc4abb554c6c9b0eda81ad1c9cb82c29aa79 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Tue, 27 Aug 2013 12:41:15 +0800 Subject: [PATCH 037/459] bus: mvebu: add missing of_node_put() to fix reference leak Add of_node_put to properly decrement the refcount when we are done using a given node. Signed-off-by: Jisheng Zhang Reviewed-by: Ezequiel Garcia Signed-off-by: Jason Cooper Conflicts: drivers/bus/mvebu-mbus.c --- drivers/bus/mvebu-mbus.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c index 19ab6ff53d59..553185318963 100644 --- a/drivers/bus/mvebu-mbus.c +++ b/drivers/bus/mvebu-mbus.c @@ -700,6 +700,7 @@ static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus, phys_addr_t sdramwins_phys_base, size_t sdramwins_size) { + struct device_node *np; int win; mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size); @@ -712,8 +713,11 @@ static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus, return -ENOMEM; } - if (of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric")) + np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"); + if (np) { mbus->hw_io_coherency = 1; + of_node_put(np); + } for (win = 0; win < mbus->soc->num_wins; win++) mvebu_mbus_disable_window(mbus, win); From 2290414be0c9e360f5909ae0e33f6a2df3980f14 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 13 Sep 2013 22:09:52 +0200 Subject: [PATCH 038/459] ARM: Kirkwood: Add missing DT reg property to cpu@0 The kirkwood.dtsi cpu@0 node is missing the mandatory reg property. This causes of_get_cpu_node() to fail to find the node and as a result the cpufreq driver fails in its probe function. Signed-off-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index cf7aeaf89e9c..858099f5b966 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -13,6 +13,7 @@ cpu@0 { device_type = "cpu"; compatible = "marvell,feroceon"; + reg = <0>; clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>; clock-names = "cpu_clk", "ddrclk", "powersave"; }; From c1bbd430d617faa2bc610c5404486b01d72c34bc Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Tue, 20 Aug 2013 12:45:50 -0300 Subject: [PATCH 039/459] ARM: mvebu: Add the reference 25 MHz fixed-clock to Armada XP The Armada XP SoC has a reference 25 MHz fixed-clock that is used in some controllers such as the timer and the watchdog. This commit adds a DT representation of this clock through a fixed-clock compatible node. Signed-off-by: Ezequiel Garcia Reviewed-by: Mike Turquette Acked-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index def125c0eeaa..c8923bd32278 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -169,4 +169,13 @@ }; }; }; + + clocks { + /* 25 MHz reference crystal */ + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + }; }; From 3a3c07001b0d4a5eec83bb87284048cd75b81510 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Tue, 20 Aug 2013 12:45:51 -0300 Subject: [PATCH 040/459] ARM: mvebu: Add clock properties to Armada XP timer node With the addition of the Armada XP reference clock, we can now model accurately the available clock inputs for the timer: namely, nbclk and refclk. For each of this clock inputs we assign a name, for the driver to select as appropriate. Signed-off-by: Ezequiel Garcia Reviewed-by: Mike Turquette Acked-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index c8923bd32278..3058522f5aad 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -70,6 +70,8 @@ timer@20300 { compatible = "marvell,armada-xp-timer"; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; }; coreclk: mvebu-sar@18230 { From 5e130367d43ff22836bbae380d197d600fe8ddbb Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Fri, 13 Sep 2013 08:58:17 +0300 Subject: [PATCH 041/459] Bluetooth: Introduce a new HCI_RFKILLED flag This makes it more convenient to check for rfkill (no need to check for dev->rfkill before calling rfkill_blocked()) and also avoids potential races if the RFKILL state needs to be checked from within the rfkill callback. Signed-off-by: Johan Hedberg Cc: stable@vger.kernel.org Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci.h | 1 + net/bluetooth/hci_core.c | 15 ++++++++++----- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index aaeaf0938ec0..15f10841e2b5 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -104,6 +104,7 @@ enum { enum { HCI_SETUP, HCI_AUTO_OFF, + HCI_RFKILLED, HCI_MGMT, HCI_PAIRABLE, HCI_SERVICE_CACHE, diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 634debab4d54..0d5bc246b607 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1146,7 +1146,7 @@ int hci_dev_open(__u16 dev) goto done; } - if (hdev->rfkill && rfkill_blocked(hdev->rfkill)) { + if (test_bit(HCI_RFKILLED, &hdev->dev_flags)) { ret = -ERFKILL; goto done; } @@ -1566,10 +1566,12 @@ static int hci_rfkill_set_block(void *data, bool blocked) BT_DBG("%p name %s blocked %d", hdev, hdev->name, blocked); - if (!blocked) - return 0; - - hci_dev_do_close(hdev); + if (blocked) { + set_bit(HCI_RFKILLED, &hdev->dev_flags); + hci_dev_do_close(hdev); + } else { + clear_bit(HCI_RFKILLED, &hdev->dev_flags); +} return 0; } @@ -2209,6 +2211,9 @@ int hci_register_dev(struct hci_dev *hdev) } } + if (hdev->rfkill && rfkill_blocked(hdev->rfkill)) + set_bit(HCI_RFKILLED, &hdev->dev_flags); + set_bit(HCI_SETUP, &hdev->dev_flags); if (hdev->dev_type != HCI_AMP) From bf5430360ebe4b2d0c51d91f782e649107b502eb Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Fri, 13 Sep 2013 08:58:18 +0300 Subject: [PATCH 042/459] Bluetooth: Fix rfkill functionality during the HCI setup stage We need to let the setup stage complete cleanly even when the HCI device is rfkilled. Otherwise the HCI device will stay in an undefined state and never get notified to user space through mgmt (even when it gets unblocked through rfkill). This patch makes sure that hci_dev_open() can be called in the HCI_SETUP stage, that blocking the device doesn't abort the setup stage, and that the device gets proper powered down as soon as the setup stage completes in case it was blocked meanwhile. The bug that this patch fixed can be very easily reproduced using e.g. the rfkill command line too. By running "rfkill block all" before inserting a Bluetooth dongle the resulting HCI device goes into a state where it is never announced over mgmt, not even when "rfkill unblock all" is run. Signed-off-by: Johan Hedberg Cc: stable@vger.kernel.org Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_core.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 0d5bc246b607..1b66547a3ca6 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1146,7 +1146,11 @@ int hci_dev_open(__u16 dev) goto done; } - if (test_bit(HCI_RFKILLED, &hdev->dev_flags)) { + /* Check for rfkill but allow the HCI setup stage to proceed + * (which in itself doesn't cause any RF activity). + */ + if (test_bit(HCI_RFKILLED, &hdev->dev_flags) && + !test_bit(HCI_SETUP, &hdev->dev_flags)) { ret = -ERFKILL; goto done; } @@ -1568,7 +1572,8 @@ static int hci_rfkill_set_block(void *data, bool blocked) if (blocked) { set_bit(HCI_RFKILLED, &hdev->dev_flags); - hci_dev_do_close(hdev); + if (!test_bit(HCI_SETUP, &hdev->dev_flags)) + hci_dev_do_close(hdev); } else { clear_bit(HCI_RFKILLED, &hdev->dev_flags); } @@ -1593,9 +1598,13 @@ static void hci_power_on(struct work_struct *work) return; } - if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags)) + if (test_bit(HCI_RFKILLED, &hdev->dev_flags)) { + clear_bit(HCI_AUTO_OFF, &hdev->dev_flags); + hci_dev_do_close(hdev); + } else if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags)) { queue_delayed_work(hdev->req_workqueue, &hdev->power_off, HCI_AUTO_OFF_TIMEOUT); + } if (test_and_clear_bit(HCI_SETUP, &hdev->dev_flags)) mgmt_index_added(hdev); From c16526a7b99c1c28e9670a8c8e3dbcf741bb32be Mon Sep 17 00:00:00 2001 From: Simon Kirby Date: Sat, 10 Aug 2013 01:26:18 -0700 Subject: [PATCH 043/459] ipvs: fix overflow on dest weight multiply Schedulers such as lblc and lblcr require the weight to be as high as the maximum number of active connections. In commit b552f7e3a9524abcbcdf ("ipvs: unify the formula to estimate the overhead of processing connections"), the consideration of inactconns and activeconns was cleaned up to always count activeconns as 256 times more important than inactconns. In cases where 3000 or more connections are expected, a weight of 3000 * 256 * 3000 connections overflows the 32-bit signed result used to determine if rescheduling is required. On amd64, this merely changes the multiply and comparison instructions to 64-bit. On x86, a 64-bit result is already present from imull, so only a few more comparison instructions are emitted. Signed-off-by: Simon Kirby Acked-by: Julian Anastasov Signed-off-by: Simon Horman --- include/net/ip_vs.h | 2 +- net/netfilter/ipvs/ip_vs_lblc.c | 4 ++-- net/netfilter/ipvs/ip_vs_lblcr.c | 12 ++++++------ net/netfilter/ipvs/ip_vs_nq.c | 8 ++++---- net/netfilter/ipvs/ip_vs_sed.c | 8 ++++---- net/netfilter/ipvs/ip_vs_wlc.c | 6 +++--- 6 files changed, 20 insertions(+), 20 deletions(-) diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index f0d70f066f3d..fe782ed2fe72 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -1649,7 +1649,7 @@ static inline void ip_vs_conn_drop_conntrack(struct ip_vs_conn *cp) /* CONFIG_IP_VS_NFCT */ #endif -static inline unsigned int +static inline int ip_vs_dest_conn_overhead(struct ip_vs_dest *dest) { /* diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c index 1383b0eadc0e..eb814bf74e64 100644 --- a/net/netfilter/ipvs/ip_vs_lblc.c +++ b/net/netfilter/ipvs/ip_vs_lblc.c @@ -443,8 +443,8 @@ __ip_vs_lblc_schedule(struct ip_vs_service *svc) continue; doh = ip_vs_dest_conn_overhead(dest); - if (loh * atomic_read(&dest->weight) > - doh * atomic_read(&least->weight)) { + if ((__s64)loh * atomic_read(&dest->weight) > + (__s64)doh * atomic_read(&least->weight)) { least = dest; loh = doh; } diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c index 5199448697f6..e65f7c573090 100644 --- a/net/netfilter/ipvs/ip_vs_lblcr.c +++ b/net/netfilter/ipvs/ip_vs_lblcr.c @@ -200,8 +200,8 @@ static inline struct ip_vs_dest *ip_vs_dest_set_min(struct ip_vs_dest_set *set) continue; doh = ip_vs_dest_conn_overhead(dest); - if ((loh * atomic_read(&dest->weight) > - doh * atomic_read(&least->weight)) + if (((__s64)loh * atomic_read(&dest->weight) > + (__s64)doh * atomic_read(&least->weight)) && (dest->flags & IP_VS_DEST_F_AVAILABLE)) { least = dest; loh = doh; @@ -246,8 +246,8 @@ static inline struct ip_vs_dest *ip_vs_dest_set_max(struct ip_vs_dest_set *set) dest = rcu_dereference_protected(e->dest, 1); doh = ip_vs_dest_conn_overhead(dest); /* moh/mw < doh/dw ==> moh*dw < doh*mw, where mw,dw>0 */ - if ((moh * atomic_read(&dest->weight) < - doh * atomic_read(&most->weight)) + if (((__s64)moh * atomic_read(&dest->weight) < + (__s64)doh * atomic_read(&most->weight)) && (atomic_read(&dest->weight) > 0)) { most = dest; moh = doh; @@ -611,8 +611,8 @@ __ip_vs_lblcr_schedule(struct ip_vs_service *svc) continue; doh = ip_vs_dest_conn_overhead(dest); - if (loh * atomic_read(&dest->weight) > - doh * atomic_read(&least->weight)) { + if ((__s64)loh * atomic_read(&dest->weight) > + (__s64)doh * atomic_read(&least->weight)) { least = dest; loh = doh; } diff --git a/net/netfilter/ipvs/ip_vs_nq.c b/net/netfilter/ipvs/ip_vs_nq.c index d8d9860934fe..961a6de9bb29 100644 --- a/net/netfilter/ipvs/ip_vs_nq.c +++ b/net/netfilter/ipvs/ip_vs_nq.c @@ -40,7 +40,7 @@ #include -static inline unsigned int +static inline int ip_vs_nq_dest_overhead(struct ip_vs_dest *dest) { /* @@ -59,7 +59,7 @@ ip_vs_nq_schedule(struct ip_vs_service *svc, const struct sk_buff *skb, struct ip_vs_iphdr *iph) { struct ip_vs_dest *dest, *least = NULL; - unsigned int loh = 0, doh; + int loh = 0, doh; IP_VS_DBG(6, "%s(): Scheduling...\n", __func__); @@ -92,8 +92,8 @@ ip_vs_nq_schedule(struct ip_vs_service *svc, const struct sk_buff *skb, } if (!least || - (loh * atomic_read(&dest->weight) > - doh * atomic_read(&least->weight))) { + ((__s64)loh * atomic_read(&dest->weight) > + (__s64)doh * atomic_read(&least->weight))) { least = dest; loh = doh; } diff --git a/net/netfilter/ipvs/ip_vs_sed.c b/net/netfilter/ipvs/ip_vs_sed.c index a5284cc3d882..e446b9fa7424 100644 --- a/net/netfilter/ipvs/ip_vs_sed.c +++ b/net/netfilter/ipvs/ip_vs_sed.c @@ -44,7 +44,7 @@ #include -static inline unsigned int +static inline int ip_vs_sed_dest_overhead(struct ip_vs_dest *dest) { /* @@ -63,7 +63,7 @@ ip_vs_sed_schedule(struct ip_vs_service *svc, const struct sk_buff *skb, struct ip_vs_iphdr *iph) { struct ip_vs_dest *dest, *least; - unsigned int loh, doh; + int loh, doh; IP_VS_DBG(6, "%s(): Scheduling...\n", __func__); @@ -99,8 +99,8 @@ ip_vs_sed_schedule(struct ip_vs_service *svc, const struct sk_buff *skb, if (dest->flags & IP_VS_DEST_F_OVERLOAD) continue; doh = ip_vs_sed_dest_overhead(dest); - if (loh * atomic_read(&dest->weight) > - doh * atomic_read(&least->weight)) { + if ((__s64)loh * atomic_read(&dest->weight) > + (__s64)doh * atomic_read(&least->weight)) { least = dest; loh = doh; } diff --git a/net/netfilter/ipvs/ip_vs_wlc.c b/net/netfilter/ipvs/ip_vs_wlc.c index 6dc1fa128840..b5b4650d50a9 100644 --- a/net/netfilter/ipvs/ip_vs_wlc.c +++ b/net/netfilter/ipvs/ip_vs_wlc.c @@ -35,7 +35,7 @@ ip_vs_wlc_schedule(struct ip_vs_service *svc, const struct sk_buff *skb, struct ip_vs_iphdr *iph) { struct ip_vs_dest *dest, *least; - unsigned int loh, doh; + int loh, doh; IP_VS_DBG(6, "ip_vs_wlc_schedule(): Scheduling...\n"); @@ -71,8 +71,8 @@ ip_vs_wlc_schedule(struct ip_vs_service *svc, const struct sk_buff *skb, if (dest->flags & IP_VS_DEST_F_OVERLOAD) continue; doh = ip_vs_dest_conn_overhead(dest); - if (loh * atomic_read(&dest->weight) > - doh * atomic_read(&least->weight)) { + if ((__s64)loh * atomic_read(&dest->weight) > + (__s64)doh * atomic_read(&least->weight)) { least = dest; loh = doh; } From bcbde4c0a7556cca72874c5e1efa4dccb5198a2b Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Thu, 12 Sep 2013 11:21:07 +0300 Subject: [PATCH 044/459] ipvs: make the service replacement more robust commit 578bc3ef1e473a ("ipvs: reorganize dest trash") added IP_VS_DEST_STATE_REMOVING flag and RCU callback named ip_vs_dest_wait_readers() to keep dests and services after removal for at least a RCU grace period. But we have the following corner cases: - we can not reuse the same dest if its service is removed while IP_VS_DEST_STATE_REMOVING is still set because another dest removal in the first grace period can not extend this period. It can happen when ipvsadm -C && ipvsadm -R is used. - dest->svc can be replaced but ip_vs_in_stats() and ip_vs_out_stats() have no explicit read memory barriers when accessing dest->svc. It can happen that dest->svc was just freed (replaced) while we use it to update the stats. We solve the problems as follows: - IP_VS_DEST_STATE_REMOVING is removed and we ensure a fixed idle period for the dest (IP_VS_DEST_TRASH_PERIOD). idle_start will remember when for first time after deletion we noticed dest->refcnt=0. Later, the connections can grab a reference while in RCU grace period but if refcnt becomes 0 we can safely free the dest and its svc. - dest->svc becomes RCU pointer. As result, we add explicit RCU locking in ip_vs_in_stats() and ip_vs_out_stats(). - __ip_vs_unbind_svc is renamed to __ip_vs_svc_put(), it now can free the service immediately or after a RCU grace period. dest->svc is not set to NULL anymore. As result, unlinked dests and their services are freed always after IP_VS_DEST_TRASH_PERIOD period, unused services are freed after a RCU grace period. Signed-off-by: Julian Anastasov Signed-off-by: Simon Horman --- include/net/ip_vs.h | 7 +-- net/netfilter/ipvs/ip_vs_core.c | 12 ++++- net/netfilter/ipvs/ip_vs_ctl.c | 86 ++++++++++++++------------------- 3 files changed, 47 insertions(+), 58 deletions(-) diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index fe782ed2fe72..9c4d37ec45a1 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -723,8 +723,6 @@ struct ip_vs_dest_dst { struct rcu_head rcu_head; }; -/* In grace period after removing */ -#define IP_VS_DEST_STATE_REMOVING 0x01 /* * The real server destination forwarding entry * with ip address, port number, and so on. @@ -742,7 +740,7 @@ struct ip_vs_dest { atomic_t refcnt; /* reference counter */ struct ip_vs_stats stats; /* statistics */ - unsigned long state; /* state flags */ + unsigned long idle_start; /* start time, jiffies */ /* connection counters and thresholds */ atomic_t activeconns; /* active connections */ @@ -756,14 +754,13 @@ struct ip_vs_dest { struct ip_vs_dest_dst __rcu *dest_dst; /* cached dst info */ /* for virtual service */ - struct ip_vs_service *svc; /* service it belongs to */ + struct ip_vs_service __rcu *svc; /* service it belongs to */ __u16 protocol; /* which protocol (TCP/UDP) */ __be16 vport; /* virtual port number */ union nf_inet_addr vaddr; /* virtual IP address */ __u32 vfwmark; /* firewall mark of service */ struct list_head t_list; /* in dest_trash */ - struct rcu_head rcu_head; unsigned int in_rs_table:1; /* we are in rs_table */ }; diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index 4f69e83ff836..74fd00c27210 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -116,6 +116,7 @@ ip_vs_in_stats(struct ip_vs_conn *cp, struct sk_buff *skb) if (dest && (dest->flags & IP_VS_DEST_F_AVAILABLE)) { struct ip_vs_cpu_stats *s; + struct ip_vs_service *svc; s = this_cpu_ptr(dest->stats.cpustats); s->ustats.inpkts++; @@ -123,11 +124,14 @@ ip_vs_in_stats(struct ip_vs_conn *cp, struct sk_buff *skb) s->ustats.inbytes += skb->len; u64_stats_update_end(&s->syncp); - s = this_cpu_ptr(dest->svc->stats.cpustats); + rcu_read_lock(); + svc = rcu_dereference(dest->svc); + s = this_cpu_ptr(svc->stats.cpustats); s->ustats.inpkts++; u64_stats_update_begin(&s->syncp); s->ustats.inbytes += skb->len; u64_stats_update_end(&s->syncp); + rcu_read_unlock(); s = this_cpu_ptr(ipvs->tot_stats.cpustats); s->ustats.inpkts++; @@ -146,6 +150,7 @@ ip_vs_out_stats(struct ip_vs_conn *cp, struct sk_buff *skb) if (dest && (dest->flags & IP_VS_DEST_F_AVAILABLE)) { struct ip_vs_cpu_stats *s; + struct ip_vs_service *svc; s = this_cpu_ptr(dest->stats.cpustats); s->ustats.outpkts++; @@ -153,11 +158,14 @@ ip_vs_out_stats(struct ip_vs_conn *cp, struct sk_buff *skb) s->ustats.outbytes += skb->len; u64_stats_update_end(&s->syncp); - s = this_cpu_ptr(dest->svc->stats.cpustats); + rcu_read_lock(); + svc = rcu_dereference(dest->svc); + s = this_cpu_ptr(svc->stats.cpustats); s->ustats.outpkts++; u64_stats_update_begin(&s->syncp); s->ustats.outbytes += skb->len; u64_stats_update_end(&s->syncp); + rcu_read_unlock(); s = this_cpu_ptr(ipvs->tot_stats.cpustats); s->ustats.outpkts++; diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index c8148e487386..a3df9bddc4f7 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -460,7 +460,7 @@ static inline void __ip_vs_bind_svc(struct ip_vs_dest *dest, struct ip_vs_service *svc) { atomic_inc(&svc->refcnt); - dest->svc = svc; + rcu_assign_pointer(dest->svc, svc); } static void ip_vs_service_free(struct ip_vs_service *svc) @@ -470,18 +470,25 @@ static void ip_vs_service_free(struct ip_vs_service *svc) kfree(svc); } -static void -__ip_vs_unbind_svc(struct ip_vs_dest *dest) +static void ip_vs_service_rcu_free(struct rcu_head *head) { - struct ip_vs_service *svc = dest->svc; + struct ip_vs_service *svc; - dest->svc = NULL; + svc = container_of(head, struct ip_vs_service, rcu_head); + ip_vs_service_free(svc); +} + +static void __ip_vs_svc_put(struct ip_vs_service *svc, bool do_delay) +{ if (atomic_dec_and_test(&svc->refcnt)) { IP_VS_DBG_BUF(3, "Removing service %u/%s:%u\n", svc->fwmark, IP_VS_DBG_ADDR(svc->af, &svc->addr), ntohs(svc->port)); - ip_vs_service_free(svc); + if (do_delay) + call_rcu(&svc->rcu_head, ip_vs_service_rcu_free); + else + ip_vs_service_free(svc); } } @@ -667,11 +674,6 @@ ip_vs_trash_get_dest(struct ip_vs_service *svc, const union nf_inet_addr *daddr, IP_VS_DBG_ADDR(svc->af, &dest->addr), ntohs(dest->port), atomic_read(&dest->refcnt)); - /* We can not reuse dest while in grace period - * because conns still can use dest->svc - */ - if (test_bit(IP_VS_DEST_STATE_REMOVING, &dest->state)) - continue; if (dest->af == svc->af && ip_vs_addr_equal(svc->af, &dest->addr, daddr) && dest->port == dport && @@ -697,8 +699,10 @@ out: static void ip_vs_dest_free(struct ip_vs_dest *dest) { + struct ip_vs_service *svc = rcu_dereference_protected(dest->svc, 1); + __ip_vs_dst_cache_reset(dest); - __ip_vs_unbind_svc(dest); + __ip_vs_svc_put(svc, false); free_percpu(dest->stats.cpustats); kfree(dest); } @@ -771,6 +775,7 @@ __ip_vs_update_dest(struct ip_vs_service *svc, struct ip_vs_dest *dest, struct ip_vs_dest_user_kern *udest, int add) { struct netns_ipvs *ipvs = net_ipvs(svc->net); + struct ip_vs_service *old_svc; struct ip_vs_scheduler *sched; int conn_flags; @@ -792,13 +797,14 @@ __ip_vs_update_dest(struct ip_vs_service *svc, struct ip_vs_dest *dest, atomic_set(&dest->conn_flags, conn_flags); /* bind the service */ - if (!dest->svc) { + old_svc = rcu_dereference_protected(dest->svc, 1); + if (!old_svc) { __ip_vs_bind_svc(dest, svc); } else { - if (dest->svc != svc) { - __ip_vs_unbind_svc(dest); + if (old_svc != svc) { ip_vs_zero_stats(&dest->stats); __ip_vs_bind_svc(dest, svc); + __ip_vs_svc_put(old_svc, true); } } @@ -998,16 +1004,6 @@ ip_vs_edit_dest(struct ip_vs_service *svc, struct ip_vs_dest_user_kern *udest) return 0; } -static void ip_vs_dest_wait_readers(struct rcu_head *head) -{ - struct ip_vs_dest *dest = container_of(head, struct ip_vs_dest, - rcu_head); - - /* End of grace period after unlinking */ - clear_bit(IP_VS_DEST_STATE_REMOVING, &dest->state); -} - - /* * Delete a destination (must be already unlinked from the service) */ @@ -1023,20 +1019,16 @@ static void __ip_vs_del_dest(struct net *net, struct ip_vs_dest *dest, */ ip_vs_rs_unhash(dest); - if (!cleanup) { - set_bit(IP_VS_DEST_STATE_REMOVING, &dest->state); - call_rcu(&dest->rcu_head, ip_vs_dest_wait_readers); - } - spin_lock_bh(&ipvs->dest_trash_lock); IP_VS_DBG_BUF(3, "Moving dest %s:%u into trash, dest->refcnt=%d\n", IP_VS_DBG_ADDR(dest->af, &dest->addr), ntohs(dest->port), atomic_read(&dest->refcnt)); if (list_empty(&ipvs->dest_trash) && !cleanup) mod_timer(&ipvs->dest_trash_timer, - jiffies + IP_VS_DEST_TRASH_PERIOD); + jiffies + (IP_VS_DEST_TRASH_PERIOD >> 1)); /* dest lives in trash without reference */ list_add(&dest->t_list, &ipvs->dest_trash); + dest->idle_start = 0; spin_unlock_bh(&ipvs->dest_trash_lock); ip_vs_dest_put(dest); } @@ -1108,24 +1100,30 @@ static void ip_vs_dest_trash_expire(unsigned long data) struct net *net = (struct net *) data; struct netns_ipvs *ipvs = net_ipvs(net); struct ip_vs_dest *dest, *next; + unsigned long now = jiffies; spin_lock(&ipvs->dest_trash_lock); list_for_each_entry_safe(dest, next, &ipvs->dest_trash, t_list) { - /* Skip if dest is in grace period */ - if (test_bit(IP_VS_DEST_STATE_REMOVING, &dest->state)) - continue; if (atomic_read(&dest->refcnt) > 0) continue; + if (dest->idle_start) { + if (time_before(now, dest->idle_start + + IP_VS_DEST_TRASH_PERIOD)) + continue; + } else { + dest->idle_start = max(1UL, now); + continue; + } IP_VS_DBG_BUF(3, "Removing destination %u/%s:%u from trash\n", dest->vfwmark, - IP_VS_DBG_ADDR(dest->svc->af, &dest->addr), + IP_VS_DBG_ADDR(dest->af, &dest->addr), ntohs(dest->port)); list_del(&dest->t_list); ip_vs_dest_free(dest); } if (!list_empty(&ipvs->dest_trash)) mod_timer(&ipvs->dest_trash_timer, - jiffies + IP_VS_DEST_TRASH_PERIOD); + jiffies + (IP_VS_DEST_TRASH_PERIOD >> 1)); spin_unlock(&ipvs->dest_trash_lock); } @@ -1320,14 +1318,6 @@ out: return ret; } -static void ip_vs_service_rcu_free(struct rcu_head *head) -{ - struct ip_vs_service *svc; - - svc = container_of(head, struct ip_vs_service, rcu_head); - ip_vs_service_free(svc); -} - /* * Delete a service from the service list * - The service must be unlinked, unlocked and not referenced! @@ -1376,13 +1366,7 @@ static void __ip_vs_del_service(struct ip_vs_service *svc, bool cleanup) /* * Free the service if nobody refers to it */ - if (atomic_dec_and_test(&svc->refcnt)) { - IP_VS_DBG_BUF(3, "Removing service %u/%s:%u\n", - svc->fwmark, - IP_VS_DBG_ADDR(svc->af, &svc->addr), - ntohs(svc->port)); - call_rcu(&svc->rcu_head, ip_vs_service_rcu_free); - } + __ip_vs_svc_put(svc, true); /* decrease the module use count */ ip_vs_use_count_dec(); From 2f3d771a35fee21a1f17364b46b3c8cc66dc6892 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Thu, 12 Sep 2013 11:21:08 +0300 Subject: [PATCH 045/459] ipvs: do not use dest after ip_vs_dest_put in LBLC commit c2a4ffb70eef39 ("ipvs: convert lblc scheduler to rcu") allows RCU readers to use dest after calling ip_vs_dest_put(). In the corner case it can race with ip_vs_dest_trash_expire() which can release the dest while it is being returned to the RCU readers as scheduling result. To fix the problem do not allow en->dest to be replaced and defer the ip_vs_dest_put() call by using RCU callback. Now en->dest does not need to be RCU pointer. Signed-off-by: Julian Anastasov Signed-off-by: Simon Horman --- net/netfilter/ipvs/ip_vs_lblc.c | 72 +++++++++++++++------------------ 1 file changed, 33 insertions(+), 39 deletions(-) diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c index eb814bf74e64..eff13c94498e 100644 --- a/net/netfilter/ipvs/ip_vs_lblc.c +++ b/net/netfilter/ipvs/ip_vs_lblc.c @@ -93,7 +93,7 @@ struct ip_vs_lblc_entry { struct hlist_node list; int af; /* address family */ union nf_inet_addr addr; /* destination IP address */ - struct ip_vs_dest __rcu *dest; /* real server (cache) */ + struct ip_vs_dest *dest; /* real server (cache) */ unsigned long lastuse; /* last used time */ struct rcu_head rcu_head; }; @@ -130,20 +130,21 @@ static struct ctl_table vs_vars_table[] = { }; #endif -static inline void ip_vs_lblc_free(struct ip_vs_lblc_entry *en) +static void ip_vs_lblc_rcu_free(struct rcu_head *head) { - struct ip_vs_dest *dest; + struct ip_vs_lblc_entry *en = container_of(head, + struct ip_vs_lblc_entry, + rcu_head); - hlist_del_rcu(&en->list); - /* - * We don't kfree dest because it is referred either by its service - * or the trash dest list. - */ - dest = rcu_dereference_protected(en->dest, 1); - ip_vs_dest_put(dest); - kfree_rcu(en, rcu_head); + ip_vs_dest_put(en->dest); + kfree(en); } +static inline void ip_vs_lblc_del(struct ip_vs_lblc_entry *en) +{ + hlist_del_rcu(&en->list); + call_rcu(&en->rcu_head, ip_vs_lblc_rcu_free); +} /* * Returns hash value for IPVS LBLC entry @@ -203,30 +204,23 @@ ip_vs_lblc_new(struct ip_vs_lblc_table *tbl, const union nf_inet_addr *daddr, struct ip_vs_lblc_entry *en; en = ip_vs_lblc_get(dest->af, tbl, daddr); - if (!en) { - en = kmalloc(sizeof(*en), GFP_ATOMIC); - if (!en) - return NULL; - - en->af = dest->af; - ip_vs_addr_copy(dest->af, &en->addr, daddr); - en->lastuse = jiffies; - - ip_vs_dest_hold(dest); - RCU_INIT_POINTER(en->dest, dest); - - ip_vs_lblc_hash(tbl, en); - } else { - struct ip_vs_dest *old_dest; - - old_dest = rcu_dereference_protected(en->dest, 1); - if (old_dest != dest) { - ip_vs_dest_put(old_dest); - ip_vs_dest_hold(dest); - /* No ordering constraints for refcnt */ - RCU_INIT_POINTER(en->dest, dest); - } + if (en) { + if (en->dest == dest) + return en; + ip_vs_lblc_del(en); } + en = kmalloc(sizeof(*en), GFP_ATOMIC); + if (!en) + return NULL; + + en->af = dest->af; + ip_vs_addr_copy(dest->af, &en->addr, daddr); + en->lastuse = jiffies; + + ip_vs_dest_hold(dest); + en->dest = dest; + + ip_vs_lblc_hash(tbl, en); return en; } @@ -246,7 +240,7 @@ static void ip_vs_lblc_flush(struct ip_vs_service *svc) tbl->dead = 1; for (i=0; ibucket[i], list) { - ip_vs_lblc_free(en); + ip_vs_lblc_del(en); atomic_dec(&tbl->entries); } } @@ -281,7 +275,7 @@ static inline void ip_vs_lblc_full_check(struct ip_vs_service *svc) sysctl_lblc_expiration(svc))) continue; - ip_vs_lblc_free(en); + ip_vs_lblc_del(en); atomic_dec(&tbl->entries); } spin_unlock(&svc->sched_lock); @@ -335,7 +329,7 @@ static void ip_vs_lblc_check_expire(unsigned long data) if (time_before(now, en->lastuse + ENTRY_TIMEOUT)) continue; - ip_vs_lblc_free(en); + ip_vs_lblc_del(en); atomic_dec(&tbl->entries); goal--; } @@ -511,7 +505,7 @@ ip_vs_lblc_schedule(struct ip_vs_service *svc, const struct sk_buff *skb, * free up entries from the trash at any time. */ - dest = rcu_dereference(en->dest); + dest = en->dest; if ((dest->flags & IP_VS_DEST_F_AVAILABLE) && atomic_read(&dest->weight) > 0 && !is_overloaded(dest, svc)) goto out; @@ -631,7 +625,7 @@ static void __exit ip_vs_lblc_cleanup(void) { unregister_ip_vs_scheduler(&ip_vs_lblc_scheduler); unregister_pernet_subsys(&ip_vs_lblc_ops); - synchronize_rcu(); + rcu_barrier(); } From 742617b176909e586a4cf9b142c996c25986fce8 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Thu, 12 Sep 2013 11:21:09 +0300 Subject: [PATCH 046/459] ipvs: do not use dest after ip_vs_dest_put in LBLCR commit c5549571f975ab ("ipvs: convert lblcr scheduler to rcu") allows RCU readers to use dest after calling ip_vs_dest_put(). In the corner case it can race with ip_vs_dest_trash_expire() which can release the dest while it is being returned to the RCU readers as scheduling result. To fix the problem do not allow e->dest to be replaced and defer the ip_vs_dest_put() call by using RCU callback. Now e->dest does not need to be RCU pointer. Signed-off-by: Julian Anastasov Signed-off-by: Simon Horman --- net/netfilter/ipvs/ip_vs_lblcr.c | 50 +++++++++++++------------------- 1 file changed, 20 insertions(+), 30 deletions(-) diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c index e65f7c573090..0b8550089a2e 100644 --- a/net/netfilter/ipvs/ip_vs_lblcr.c +++ b/net/netfilter/ipvs/ip_vs_lblcr.c @@ -89,7 +89,7 @@ */ struct ip_vs_dest_set_elem { struct list_head list; /* list link */ - struct ip_vs_dest __rcu *dest; /* destination server */ + struct ip_vs_dest *dest; /* destination server */ struct rcu_head rcu_head; }; @@ -107,11 +107,7 @@ static void ip_vs_dest_set_insert(struct ip_vs_dest_set *set, if (check) { list_for_each_entry(e, &set->list, list) { - struct ip_vs_dest *d; - - d = rcu_dereference_protected(e->dest, 1); - if (d == dest) - /* already existed */ + if (e->dest == dest) return; } } @@ -121,7 +117,7 @@ static void ip_vs_dest_set_insert(struct ip_vs_dest_set *set, return; ip_vs_dest_hold(dest); - RCU_INIT_POINTER(e->dest, dest); + e->dest = dest; list_add_rcu(&e->list, &set->list); atomic_inc(&set->size); @@ -129,22 +125,27 @@ static void ip_vs_dest_set_insert(struct ip_vs_dest_set *set, set->lastmod = jiffies; } +static void ip_vs_lblcr_elem_rcu_free(struct rcu_head *head) +{ + struct ip_vs_dest_set_elem *e; + + e = container_of(head, struct ip_vs_dest_set_elem, rcu_head); + ip_vs_dest_put(e->dest); + kfree(e); +} + static void ip_vs_dest_set_erase(struct ip_vs_dest_set *set, struct ip_vs_dest *dest) { struct ip_vs_dest_set_elem *e; list_for_each_entry(e, &set->list, list) { - struct ip_vs_dest *d; - - d = rcu_dereference_protected(e->dest, 1); - if (d == dest) { + if (e->dest == dest) { /* HIT */ atomic_dec(&set->size); set->lastmod = jiffies; - ip_vs_dest_put(dest); list_del_rcu(&e->list); - kfree_rcu(e, rcu_head); + call_rcu(&e->rcu_head, ip_vs_lblcr_elem_rcu_free); break; } } @@ -155,16 +156,8 @@ static void ip_vs_dest_set_eraseall(struct ip_vs_dest_set *set) struct ip_vs_dest_set_elem *e, *ep; list_for_each_entry_safe(e, ep, &set->list, list) { - struct ip_vs_dest *d; - - d = rcu_dereference_protected(e->dest, 1); - /* - * We don't kfree dest because it is referred either - * by its service or by the trash dest list. - */ - ip_vs_dest_put(d); list_del_rcu(&e->list); - kfree_rcu(e, rcu_head); + call_rcu(&e->rcu_head, ip_vs_lblcr_elem_rcu_free); } } @@ -175,12 +168,9 @@ static inline struct ip_vs_dest *ip_vs_dest_set_min(struct ip_vs_dest_set *set) struct ip_vs_dest *dest, *least; int loh, doh; - if (set == NULL) - return NULL; - /* select the first destination server, whose weight > 0 */ list_for_each_entry_rcu(e, &set->list, list) { - least = rcu_dereference(e->dest); + least = e->dest; if (least->flags & IP_VS_DEST_F_OVERLOAD) continue; @@ -195,7 +185,7 @@ static inline struct ip_vs_dest *ip_vs_dest_set_min(struct ip_vs_dest_set *set) /* find the destination with the weighted least load */ nextstage: list_for_each_entry_continue_rcu(e, &set->list, list) { - dest = rcu_dereference(e->dest); + dest = e->dest; if (dest->flags & IP_VS_DEST_F_OVERLOAD) continue; @@ -232,7 +222,7 @@ static inline struct ip_vs_dest *ip_vs_dest_set_max(struct ip_vs_dest_set *set) /* select the first destination server, whose weight > 0 */ list_for_each_entry(e, &set->list, list) { - most = rcu_dereference_protected(e->dest, 1); + most = e->dest; if (atomic_read(&most->weight) > 0) { moh = ip_vs_dest_conn_overhead(most); goto nextstage; @@ -243,7 +233,7 @@ static inline struct ip_vs_dest *ip_vs_dest_set_max(struct ip_vs_dest_set *set) /* find the destination with the weighted most load */ nextstage: list_for_each_entry_continue(e, &set->list, list) { - dest = rcu_dereference_protected(e->dest, 1); + dest = e->dest; doh = ip_vs_dest_conn_overhead(dest); /* moh/mw < doh/dw ==> moh*dw < doh*mw, where mw,dw>0 */ if (((__s64)moh * atomic_read(&dest->weight) < @@ -819,7 +809,7 @@ static void __exit ip_vs_lblcr_cleanup(void) { unregister_ip_vs_scheduler(&ip_vs_lblcr_scheduler); unregister_pernet_subsys(&ip_vs_lblcr_ops); - synchronize_rcu(); + rcu_barrier(); } From d1ee4fea0b6946dd8bc61b46db35ea80af7af34b Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Thu, 12 Sep 2013 11:21:10 +0300 Subject: [PATCH 047/459] ipvs: stats should not depend on CPU 0 When reading percpu stats we need to properly reset the sum when CPU 0 is not present in the possible mask. Signed-off-by: Julian Anastasov Signed-off-by: Simon Horman --- net/netfilter/ipvs/ip_vs_est.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/netfilter/ipvs/ip_vs_est.c b/net/netfilter/ipvs/ip_vs_est.c index 6bee6d0c73a5..1425e9a924c4 100644 --- a/net/netfilter/ipvs/ip_vs_est.c +++ b/net/netfilter/ipvs/ip_vs_est.c @@ -59,12 +59,13 @@ static void ip_vs_read_cpu_stats(struct ip_vs_stats_user *sum, struct ip_vs_cpu_stats __percpu *stats) { int i; + bool add = false; for_each_possible_cpu(i) { struct ip_vs_cpu_stats *s = per_cpu_ptr(stats, i); unsigned int start; __u64 inbytes, outbytes; - if (i) { + if (add) { sum->conns += s->ustats.conns; sum->inpkts += s->ustats.inpkts; sum->outpkts += s->ustats.outpkts; @@ -76,6 +77,7 @@ static void ip_vs_read_cpu_stats(struct ip_vs_stats_user *sum, sum->inbytes += inbytes; sum->outbytes += outbytes; } else { + add = true; sum->conns = s->ustats.conns; sum->inpkts = s->ustats.inpkts; sum->outpkts = s->ustats.outpkts; From 53ed7812841f107786f69e0437831469ffdeeeee Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Tue, 10 Sep 2013 16:30:21 +0530 Subject: [PATCH 048/459] ARM: davinci: fix build breakage with DEBUG_LL commit fcf7157 ("ARM: davinci: serial: get rid of davinci_uart_config") introduced build breakage because of a misplaced header file include which cause a bunch of errors when the file is included in assembly code (like debug-macro.S) Fix the build breakage. Reported-by: Alexander Holler Tested-by: Alexander Holler Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/include/mach/serial.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 52b8571b2e70..ce402cd21fa0 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -15,8 +15,6 @@ #include -#include - #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) @@ -39,6 +37,8 @@ #define UART_DM646X_SCR_TX_WATERMARK 0x08 #ifndef __ASSEMBLY__ +#include + extern int davinci_serial_init(struct platform_device *); #endif From 016b9eb0c52ed7349ffdb42b4e51c93ad1f5d90a Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 4 Sep 2013 11:00:46 -0700 Subject: [PATCH 049/459] ARM: davinci: dm365 evm: fix unused variable warning If neither CONFIG_SND_DM365_AIC3X_CODEC nor CONFIG_SND_DM365_VOICE_CODEC are defined, we may get warnings like: arch/arm/mach-davinci/board-dm365-evm.c:179:33: warning: 'dm365_evm_snd_data' defined but not used [-Wunused-variable] To fix this, just mark the struct as __maybe_unused. Signed-off-by: Brian Norris Cc: Sekhar Nori Cc: Kevin Hilman Cc: Russell King Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-dm365-evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 92b7f770615a..4078ba93776b 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -176,7 +176,7 @@ static struct at24_platform_data eeprom_info = { .context = (void *)0x7f00, }; -static struct snd_platform_data dm365_evm_snd_data = { +static struct snd_platform_data dm365_evm_snd_data __maybe_unused = { .asp_chan_q = EVENTQ_3, }; From de059be983db710379d965a7baa0a01275795c95 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 10 Sep 2013 18:30:59 +0200 Subject: [PATCH 050/459] pinctrl: tegra114: Remove MODULE_ALIAS The driver cannot be built as a module, so having a MODULE_ALIAS() isn't useful. While at it, fix a small typo in the file header comment and make the module description string consistent with those for earlier Tegra SoCs. Signed-off-by: Thierry Reding Acked-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-tegra114.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/pinctrl-tegra114.c b/drivers/pinctrl/pinctrl-tegra114.c index 622c4854977e..93c9e3899d5e 100644 --- a/drivers/pinctrl/pinctrl-tegra114.c +++ b/drivers/pinctrl/pinctrl-tegra114.c @@ -3,7 +3,7 @@ * * Copyright (c) 2012-2013, NVIDIA CORPORATION. All rights reserved. * - * Arthur: Pritesh Raithatha + * Author: Pritesh Raithatha * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -2763,7 +2763,6 @@ static struct platform_driver tegra114_pinctrl_driver = { }; module_platform_driver(tegra114_pinctrl_driver); -MODULE_ALIAS("platform:tegra114-pinctrl"); MODULE_AUTHOR("Pritesh Raithatha "); -MODULE_DESCRIPTION("NVIDIA Tegra114 pincontrol driver"); +MODULE_DESCRIPTION("NVIDIA Tegra114 pinctrl driver"); MODULE_LICENSE("GPL v2"); From df923c1532fb13569de61a7b8887c2ee9ba4a8f7 Mon Sep 17 00:00:00 2001 From: Jiri Prchal Date: Thu, 19 Sep 2013 14:28:39 +0200 Subject: [PATCH 051/459] ARM: at91: serial: fix wrong pinctrl_usart2_rts Replace pinctrl_usart2_rts and pinctrl_usart2_cts istead of pinctrl_uart2_*. Signed-off-by: Jiri Prchal Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9x5.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index cf78ac0b04b1..c68486e1f5b2 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -190,12 +190,12 @@ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ }; - pinctrl_uart2_rts: uart2_rts-0 { + pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = ; /* PB0 periph B */ }; - pinctrl_uart2_cts: uart2_cts-0 { + pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = ; /* PB1 periph B */ }; From 087e35ad71aac1daab0fcd21b61da15ffe7aaec5 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Thu, 19 Sep 2013 18:09:55 +0530 Subject: [PATCH 052/459] regulator: wm8350: correct the max_uV of LDO As per datasheet, voltage range for LDOs are as follows: 0000 = 0.9V ...(50mV steps) 01111 = 1.65V 10000 = 1.8V ... (100mV stepns) 11111 = 3.3V So, there is no selector for 1.65V to 1.8V. Correcting the range for max_uV for selector between 0 to 15. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- drivers/regulator/wm8350-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 835b5f0f344e..61ca9292a429 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -543,7 +543,7 @@ static int wm8350_dcdc_set_suspend_mode(struct regulator_dev *rdev, } static const struct regulator_linear_range wm8350_ldo_ranges[] = { - { .min_uV = 900000, .max_uV = 1750000, .min_sel = 0, .max_sel = 15, + { .min_uV = 900000, .max_uV = 1650000, .min_sel = 0, .max_sel = 15, .uV_step = 50000 }, { .min_uV = 1800000, .max_uV = 3300000, .min_sel = 16, .max_sel = 31, .uV_step = 100000 }, From e7cca2546b3bdf6545b16127113a7057e2946efa Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Thu, 19 Sep 2013 15:22:57 +0200 Subject: [PATCH 053/459] ARM: at91: at91sam9x5: set default mmc[01] pinctrl-names Reported-by: Jiri Prchal Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9x5.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index c68486e1f5b2..e74dc15efa9d 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -556,6 +556,7 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -567,6 +568,7 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; From 9ceb389dddbcdb87830f01fcf84d94b2da581dae Mon Sep 17 00:00:00 2001 From: Michael Opdenacker Date: Wed, 4 Sep 2013 06:54:39 +0200 Subject: [PATCH 054/459] ARM: at91: remove IRQF_DISABLED This flag is a NOOP since 2.6.36 and can be removed. This is an update for 3.11 of a patch already sent for 3.10 Signed-off-by: Michael Opdenacker Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/at91rm9200_time.c | 2 +- arch/arm/mach-at91/at91sam926x_time.c | 2 +- arch/arm/mach-at91/at91x40_time.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 180b3024bec3..f607deb40f4d 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -93,7 +93,7 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) static struct irqaction at91rm9200_timer_irq = { .name = "at91_tick", - .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL, .handler = at91rm9200_timer_interrupt, .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index 3a4bc2e1a65e..bb392320a0dd 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -171,7 +171,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) static struct irqaction at91sam926x_pit_irq = { .name = "at91_tick", - .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL, .handler = at91sam926x_pit_interrupt, .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index 2919eba41ff4..c0e637adf65d 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -57,7 +57,7 @@ static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id) static struct irqaction at91x40_timer_irq = { .name = "at91_tick", - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = at91x40_timer_interrupt }; From ddf7e399024aa908573a08d6339cefa6253b83db Mon Sep 17 00:00:00 2001 From: Quentin Armitage Date: Thu, 19 Sep 2013 12:00:29 +0100 Subject: [PATCH 055/459] ARM: kirkwood: Fix address of second XOR engine There appears to be an error in the second address of the second XOR engine in the Kirkwood SoC device tree, which is specified as 0xd0b00 but should be 0x60b00. For confirmation of address see table 581 page 658 of: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf Also see definition of XOR1_HIGH_PHYS_BASE in arch/arm/mach-kirkwood/include/mach/kirkwood.h Signed-off-by: Quentin Armitage Reviewed-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 858099f5b966..1335b2e1bed4 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -168,7 +168,7 @@ xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 - 0xd0B00 0x100>; + 0x60B00 0x100>; status = "okay"; clocks = <&gate_clk 16>; From dfdaa95c7abc3dc7acf44b0c4aeac4c3c44966d6 Mon Sep 17 00:00:00 2001 From: Daniel Pieczko Date: Wed, 18 Sep 2013 10:16:24 +0100 Subject: [PATCH 056/459] sfc: Wait for MC reboot to complete before scheduling driver reset Scheduling a reset following an MC reboot event before waiting for reboot to complete results in a race that can lead to a state where must_realloc_vis is false in efx_ef10_fini_dmaq() but the VIs have been destroyed during the MC reboot. To avoid MC errors when trying to remove VIs that do not exist, wait for the MC reboot to complete before scheduling the reset. Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/mcdi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/sfc/mcdi.c b/drivers/net/ethernet/sfc/mcdi.c index 128d7cdf9eb2..73143ece4832 100644 --- a/drivers/net/ethernet/sfc/mcdi.c +++ b/drivers/net/ethernet/sfc/mcdi.c @@ -800,9 +800,6 @@ static void efx_mcdi_ev_death(struct efx_nic *efx, int rc) } else { int count; - /* Nobody was waiting for an MCDI request, so trigger a reset */ - efx_schedule_reset(efx, RESET_TYPE_MC_FAILURE); - /* Consume the status word since efx_mcdi_rpc_finish() won't */ for (count = 0; count < MCDI_STATUS_DELAY_COUNT; ++count) { if (efx_mcdi_poll_reboot(efx)) @@ -810,6 +807,9 @@ static void efx_mcdi_ev_death(struct efx_nic *efx, int rc) udelay(MCDI_STATUS_DELAY_US); } mcdi->new_epoch = true; + + /* Nobody was waiting for an MCDI request, so trigger a reset */ + efx_schedule_reset(efx, RESET_TYPE_MC_FAILURE); } spin_unlock(&mcdi->iface_lock); From b2d32f03e67cc9b0ad16fc1fff87edf90f059883 Mon Sep 17 00:00:00 2001 From: Daniel Pieczko Date: Fri, 20 Sep 2013 16:45:10 +0100 Subject: [PATCH 057/459] sfc: Increase MCDI status timeout to 250ms The SFC9120 MC firmware often takes longer than 20ms to reboot and update the warm boot count in BIU_MC_SFT_STATUS_REG. A timeout of 250ms is very generous for an MC reboot. Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/mcdi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/sfc/mcdi.c b/drivers/net/ethernet/sfc/mcdi.c index 73143ece4832..c082562dbf4e 100644 --- a/drivers/net/ethernet/sfc/mcdi.c +++ b/drivers/net/ethernet/sfc/mcdi.c @@ -27,10 +27,10 @@ /* A reboot/assertion causes the MCDI status word to be set after the * command word is set or a REBOOT event is sent. If we notice a reboot - * via these mechanisms then wait 20ms for the status word to be set. + * via these mechanisms then wait 250ms for the status word to be set. */ #define MCDI_STATUS_DELAY_US 100 -#define MCDI_STATUS_DELAY_COUNT 200 +#define MCDI_STATUS_DELAY_COUNT 2500 #define MCDI_STATUS_SLEEP_MS \ (MCDI_STATUS_DELAY_US * MCDI_STATUS_DELAY_COUNT / 1000) From f37d6e701f2a3a04e66690397340a6417f6e053f Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Thu, 5 Sep 2013 01:46:09 +0400 Subject: [PATCH 058/459] can: pcan_usb_core: fix memory leak on failure paths in peak_usb_start() Tx and rx urbs are not deallocated if something goes wrong in peak_usb_start(). The patch fixes error handling to deallocate all the resources. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_core.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c index a0f647f92bf5..0b7a4c3b01a2 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c @@ -463,7 +463,7 @@ static int peak_usb_start(struct peak_usb_device *dev) if (i < PCAN_USB_MAX_TX_URBS) { if (i == 0) { netdev_err(netdev, "couldn't setup any tx URB\n"); - return err; + goto err_tx; } netdev_warn(netdev, "tx performance may be slow\n"); @@ -472,7 +472,7 @@ static int peak_usb_start(struct peak_usb_device *dev) if (dev->adapter->dev_start) { err = dev->adapter->dev_start(dev); if (err) - goto failed; + goto err_adapter; } dev->state |= PCAN_USB_STATE_STARTED; @@ -481,19 +481,26 @@ static int peak_usb_start(struct peak_usb_device *dev) if (dev->adapter->dev_set_bus) { err = dev->adapter->dev_set_bus(dev, 1); if (err) - goto failed; + goto err_adapter; } dev->can.state = CAN_STATE_ERROR_ACTIVE; return 0; -failed: +err_adapter: if (err == -ENODEV) netif_device_detach(dev->netdev); netdev_warn(netdev, "couldn't submit control: %d\n", err); + for (i = 0; i < PCAN_USB_MAX_TX_URBS; i++) { + usb_free_urb(dev->tx_contexts[i].urb); + dev->tx_contexts[i].urb = NULL; + } +err_tx: + usb_kill_anchored_urbs(&dev->rx_submitted); + return err; } From 29cd718beba999bda4bdbbf59b5a4d25c07e1547 Mon Sep 17 00:00:00 2001 From: Gianluca Anzolin Date: Tue, 27 Aug 2013 18:28:46 +0200 Subject: [PATCH 059/459] Bluetooth: don't release the port in rfcomm_dev_state_change() When the dlc is closed, rfcomm_dev_state_change() tries to release the port in the case it cannot get a reference to the tty. However this is racy and not even needed. Infact as Peter Hurley points out: 1. Only consider dlcs that are 'stolen' from a connected socket, ie. reused. Allocated dlcs cannot have been closed prior to port activate and so for these dlcs a tty reference will always be avail in rfcomm_dev_state_change() -- except for the conditions covered by #2b below. 2. If a tty was at some point previously created for this rfcomm, then either (a) the tty reference is still avail, so rfcomm_dev_state_change() will perform a hangup. So nothing to do, or, (b) the tty reference is no longer avail, and the tty_port will be destroyed by the last tty_port_put() in rfcomm_tty_cleanup. Again, no action required. 3. Prior to obtaining the dlc lock in rfcomm_dev_add(), rfcomm_dev_state_change() will not 'see' a rfcomm_dev so nothing to do here. 4. After releasing the dlc lock in rfcomm_dev_add(), rfcomm_dev_state_change() will 'see' an incomplete rfcomm_dev if a tty reference could not be obtained. Again, the best thing to do here is nothing. Any future attempted open() will block on rfcomm_dev_carrier_raised(). The unconnected device will exist until released by ioctl(RFCOMMRELEASEDEV). The patch removes the aforementioned code and uses the tty_port_tty_hangup() helper to hangup the tty. Signed-off-by: Gianluca Anzolin Reviewed-by: Peter Hurley Signed-off-by: Gustavo Padovan --- net/bluetooth/rfcomm/tty.c | 35 ++--------------------------------- 1 file changed, 2 insertions(+), 33 deletions(-) diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index 6d126faf145f..84fcf9fff3ea 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -569,7 +569,6 @@ static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc, struct sk_buff *skb) static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err) { struct rfcomm_dev *dev = dlc->owner; - struct tty_struct *tty; if (!dev) return; @@ -581,38 +580,8 @@ static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err) DPM_ORDER_DEV_AFTER_PARENT); wake_up_interruptible(&dev->port.open_wait); - } else if (dlc->state == BT_CLOSED) { - tty = tty_port_tty_get(&dev->port); - if (!tty) { - if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) { - /* Drop DLC lock here to avoid deadlock - * 1. rfcomm_dev_get will take rfcomm_dev_lock - * but in rfcomm_dev_add there's lock order: - * rfcomm_dev_lock -> dlc lock - * 2. tty_port_put will deadlock if it's - * the last reference - * - * FIXME: when we release the lock anything - * could happen to dev, even its destruction - */ - rfcomm_dlc_unlock(dlc); - if (rfcomm_dev_get(dev->id) == NULL) { - rfcomm_dlc_lock(dlc); - return; - } - - if (!test_and_set_bit(RFCOMM_TTY_RELEASED, - &dev->flags)) - tty_port_put(&dev->port); - - tty_port_put(&dev->port); - rfcomm_dlc_lock(dlc); - } - } else { - tty_hangup(tty); - tty_kref_put(tty); - } - } + } else if (dlc->state == BT_CLOSED) + tty_port_tty_hangup(&dev->port, false); } static void rfcomm_dev_modem_status(struct rfcomm_dlc *dlc, u8 v24_sig) From cc9fa74e2a195f7bab27fbbc4896d2fe3ec32150 Mon Sep 17 00:00:00 2001 From: Andre Naujoks Date: Fri, 13 Sep 2013 19:37:11 +0200 Subject: [PATCH 060/459] slip/slcan: added locking in wakeup function The locking is needed, since the the internal buffer for the CAN frames is changed during the wakeup call. This could cause buffer inconsistencies under high loads, especially for the outgoing short CAN packet skbuffs. The needed locks led to deadlocks before commit "5ede52538ee2b2202d9dff5b06c33bfde421e6e4 tty: Remove extra wakeup from pty write() path", which removed the direct callback to the wakeup function from the tty layer. As slcan.c is based on slip.c the issue in the original code is fixed, too. Signed-off-by: Andre Naujoks Acked-by: Oliver Hartkopp Acked-by: Marc Kleine-Budde Signed-off-by: David S. Miller --- drivers/net/can/slcan.c | 3 +++ drivers/net/slip/slip.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index 874188ba06f7..d571e2e9708f 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -286,11 +286,13 @@ static void slcan_write_wakeup(struct tty_struct *tty) if (!sl || sl->magic != SLCAN_MAGIC || !netif_running(sl->dev)) return; + spin_lock(&sl->lock); if (sl->xleft <= 0) { /* Now serial buffer is almost free & we can start * transmission of another packet */ sl->dev->stats.tx_packets++; clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + spin_unlock(&sl->lock); netif_wake_queue(sl->dev); return; } @@ -298,6 +300,7 @@ static void slcan_write_wakeup(struct tty_struct *tty) actual = tty->ops->write(tty, sl->xhead, sl->xleft); sl->xleft -= actual; sl->xhead += actual; + spin_unlock(&sl->lock); } /* Send a can_frame to a TTY queue. */ diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index a34d6bf5e43b..cc70ecfc7062 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -429,11 +429,13 @@ static void slip_write_wakeup(struct tty_struct *tty) if (!sl || sl->magic != SLIP_MAGIC || !netif_running(sl->dev)) return; + spin_lock(&sl->lock); if (sl->xleft <= 0) { /* Now serial buffer is almost free & we can start * transmission of another packet */ sl->dev->stats.tx_packets++; clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + spin_unlock(&sl->lock); sl_unlock(sl); return; } @@ -441,6 +443,7 @@ static void slip_write_wakeup(struct tty_struct *tty) actual = tty->ops->write(tty, sl->xhead, sl->xleft); sl->xleft -= actual; sl->xhead += actual; + spin_unlock(&sl->lock); } static void sl_tx_timeout(struct net_device *dev) From c26d436cbf7a9549ec1073480a2e3f0d3f64e02d Mon Sep 17 00:00:00 2001 From: Andre Naujoks Date: Fri, 13 Sep 2013 19:37:12 +0200 Subject: [PATCH 061/459] lib: introduce upper case hex ascii helpers To be able to use the hex ascii functions in case sensitive environments the array hex_asc_upper[] and the needed functions for hex_byte_pack_upper() are introduced. Signed-off-by: Andre Naujoks Signed-off-by: David S. Miller --- include/linux/kernel.h | 11 +++++++++++ lib/hexdump.c | 2 ++ 2 files changed, 13 insertions(+) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 482ad2d84a32..672ddc4de4af 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -439,6 +439,17 @@ static inline char *hex_byte_pack(char *buf, u8 byte) return buf; } +extern const char hex_asc_upper[]; +#define hex_asc_upper_lo(x) hex_asc_upper[((x) & 0x0f)] +#define hex_asc_upper_hi(x) hex_asc_upper[((x) & 0xf0) >> 4] + +static inline char *hex_byte_pack_upper(char *buf, u8 byte) +{ + *buf++ = hex_asc_upper_hi(byte); + *buf++ = hex_asc_upper_lo(byte); + return buf; +} + static inline char * __deprecated pack_hex_byte(char *buf, u8 byte) { return hex_byte_pack(buf, byte); diff --git a/lib/hexdump.c b/lib/hexdump.c index 3f0494c9d57a..8499c810909a 100644 --- a/lib/hexdump.c +++ b/lib/hexdump.c @@ -14,6 +14,8 @@ const char hex_asc[] = "0123456789abcdef"; EXPORT_SYMBOL(hex_asc); +const char hex_asc_upper[] = "0123456789ABCDEF"; +EXPORT_SYMBOL(hex_asc_upper); /** * hex_to_bin - convert a hex digit to its real value From 87397fe10db0e7ee85041eee5a40052cab66aaff Mon Sep 17 00:00:00 2001 From: Andre Naujoks Date: Fri, 13 Sep 2013 19:37:13 +0200 Subject: [PATCH 062/459] slcan: rewrite of slc_bump and slc_encaps The old implementation was heavy on str* functions and sprintf calls. This version is more manual, but faster. Profiling just the printing of a 3 char CAN-id resulted in 60 instructions for the manual method and over 2000 for the sprintf method. Bear in mind the profiling was done against libc and not the kernel sprintf. Together with this rewrite an issue with sending and receiving of RTR frames has been fixed by Oliver for the cases that the DLC is not zero. Signed-off-by: Andre Naujoks Tested-by: Oliver Hartkopp Acked-by: Oliver Hartkopp Acked-by: Marc Kleine-Budde Signed-off-by: David S. Miller --- drivers/net/can/slcan.c | 140 +++++++++++++++++++++++++--------------- 1 file changed, 89 insertions(+), 51 deletions(-) diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index d571e2e9708f..25377e547f9b 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -76,6 +76,10 @@ MODULE_PARM_DESC(maxdev, "Maximum number of slcan interfaces"); /* maximum rx buffer len: extended CAN frame with timestamp */ #define SLC_MTU (sizeof("T1111222281122334455667788EA5F\r")+1) +#define SLC_CMD_LEN 1 +#define SLC_SFF_ID_LEN 3 +#define SLC_EFF_ID_LEN 8 + struct slcan { int magic; @@ -142,47 +146,63 @@ static void slc_bump(struct slcan *sl) { struct sk_buff *skb; struct can_frame cf; - int i, dlc_pos, tmp; - unsigned long ultmp; - char cmd = sl->rbuff[0]; + int i, tmp; + u32 tmpid; + char *cmd = sl->rbuff; - if ((cmd != 't') && (cmd != 'T') && (cmd != 'r') && (cmd != 'R')) - return; + cf.can_id = 0; - if (cmd & 0x20) /* tiny chars 'r' 't' => standard frame format */ - dlc_pos = 4; /* dlc position tiiid */ - else - dlc_pos = 9; /* dlc position Tiiiiiiiid */ - - if (!((sl->rbuff[dlc_pos] >= '0') && (sl->rbuff[dlc_pos] < '9'))) - return; - - cf.can_dlc = sl->rbuff[dlc_pos] - '0'; /* get can_dlc from ASCII val */ - - sl->rbuff[dlc_pos] = 0; /* terminate can_id string */ - - if (kstrtoul(sl->rbuff+1, 16, &ultmp)) - return; - - cf.can_id = ultmp; - - if (!(cmd & 0x20)) /* NO tiny chars => extended frame format */ + switch (*cmd) { + case 'r': + cf.can_id = CAN_RTR_FLAG; + /* fallthrough */ + case 't': + /* store dlc ASCII value and terminate SFF CAN ID string */ + cf.can_dlc = sl->rbuff[SLC_CMD_LEN + SLC_SFF_ID_LEN]; + sl->rbuff[SLC_CMD_LEN + SLC_SFF_ID_LEN] = 0; + /* point to payload data behind the dlc */ + cmd += SLC_CMD_LEN + SLC_SFF_ID_LEN + 1; + break; + case 'R': + cf.can_id = CAN_RTR_FLAG; + /* fallthrough */ + case 'T': cf.can_id |= CAN_EFF_FLAG; + /* store dlc ASCII value and terminate EFF CAN ID string */ + cf.can_dlc = sl->rbuff[SLC_CMD_LEN + SLC_EFF_ID_LEN]; + sl->rbuff[SLC_CMD_LEN + SLC_EFF_ID_LEN] = 0; + /* point to payload data behind the dlc */ + cmd += SLC_CMD_LEN + SLC_EFF_ID_LEN + 1; + break; + default: + return; + } - if ((cmd | 0x20) == 'r') /* RTR frame */ - cf.can_id |= CAN_RTR_FLAG; + if (kstrtou32(sl->rbuff + SLC_CMD_LEN, 16, &tmpid)) + return; + + cf.can_id |= tmpid; + + /* get can_dlc from sanitized ASCII value */ + if (cf.can_dlc >= '0' && cf.can_dlc < '9') + cf.can_dlc -= '0'; + else + return; *(u64 *) (&cf.data) = 0; /* clear payload */ - for (i = 0, dlc_pos++; i < cf.can_dlc; i++) { - tmp = hex_to_bin(sl->rbuff[dlc_pos++]); - if (tmp < 0) - return; - cf.data[i] = (tmp << 4); - tmp = hex_to_bin(sl->rbuff[dlc_pos++]); - if (tmp < 0) - return; - cf.data[i] |= tmp; + /* RTR frames may have a dlc > 0 but they never have any data bytes */ + if (!(cf.can_id & CAN_RTR_FLAG)) { + for (i = 0; i < cf.can_dlc; i++) { + tmp = hex_to_bin(*cmd++); + if (tmp < 0) + return; + cf.data[i] = (tmp << 4); + tmp = hex_to_bin(*cmd++); + if (tmp < 0) + return; + cf.data[i] |= tmp; + } } skb = dev_alloc_skb(sizeof(struct can_frame) + @@ -209,7 +229,6 @@ static void slc_bump(struct slcan *sl) /* parse tty input stream */ static void slcan_unesc(struct slcan *sl, unsigned char s) { - if ((s == '\r') || (s == '\a')) { /* CR or BEL ends the pdu */ if (!test_and_clear_bit(SLF_ERROR, &sl->flags) && (sl->rcount > 4)) { @@ -236,27 +255,46 @@ static void slcan_unesc(struct slcan *sl, unsigned char s) /* Encapsulate one can_frame and stuff into a TTY queue. */ static void slc_encaps(struct slcan *sl, struct can_frame *cf) { - int actual, idx, i; - char cmd; + int actual, i; + unsigned char *pos; + unsigned char *endpos; + canid_t id = cf->can_id; + + pos = sl->xbuff; if (cf->can_id & CAN_RTR_FLAG) - cmd = 'R'; /* becomes 'r' in standard frame format */ + *pos = 'R'; /* becomes 'r' in standard frame format (SFF) */ else - cmd = 'T'; /* becomes 't' in standard frame format */ + *pos = 'T'; /* becomes 't' in standard frame format (SSF) */ - if (cf->can_id & CAN_EFF_FLAG) - sprintf(sl->xbuff, "%c%08X%d", cmd, - cf->can_id & CAN_EFF_MASK, cf->can_dlc); - else - sprintf(sl->xbuff, "%c%03X%d", cmd | 0x20, - cf->can_id & CAN_SFF_MASK, cf->can_dlc); + /* determine number of chars for the CAN-identifier */ + if (cf->can_id & CAN_EFF_FLAG) { + id &= CAN_EFF_MASK; + endpos = pos + SLC_EFF_ID_LEN; + } else { + *pos |= 0x20; /* convert R/T to lower case for SFF */ + id &= CAN_SFF_MASK; + endpos = pos + SLC_SFF_ID_LEN; + } - idx = strlen(sl->xbuff); + /* build 3 (SFF) or 8 (EFF) digit CAN identifier */ + pos++; + while (endpos >= pos) { + *endpos-- = hex_asc_upper[id & 0xf]; + id >>= 4; + } - for (i = 0; i < cf->can_dlc; i++) - sprintf(&sl->xbuff[idx + 2*i], "%02X", cf->data[i]); + pos += (cf->can_id & CAN_EFF_FLAG) ? SLC_EFF_ID_LEN : SLC_SFF_ID_LEN; - strcat(sl->xbuff, "\r"); /* add terminating character */ + *pos++ = cf->can_dlc + '0'; + + /* RTR frames may have a dlc > 0 but they never have any data bytes */ + if (!(cf->can_id & CAN_RTR_FLAG)) { + for (i = 0; i < cf->can_dlc; i++) + pos = hex_byte_pack_upper(pos, cf->data[i]); + } + + *pos++ = '\r'; /* Order of next two lines is *very* important. * When we are sending a little amount of data, @@ -267,8 +305,8 @@ static void slc_encaps(struct slcan *sl, struct can_frame *cf) * 14 Oct 1994 Dmitry Gorodchanin. */ set_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags); - actual = sl->tty->ops->write(sl->tty, sl->xbuff, strlen(sl->xbuff)); - sl->xleft = strlen(sl->xbuff) - actual; + actual = sl->tty->ops->write(sl->tty, sl->xbuff, pos - sl->xbuff); + sl->xleft = (pos - sl->xbuff) - actual; sl->xhead = sl->xbuff + actual; sl->dev->stats.tx_bytes += cf->can_dlc; } From 74d290da476f672ad756634d12aa707375d3564d Mon Sep 17 00:00:00 2001 From: Jim McDonough Date: Sat, 21 Sep 2013 10:36:10 -0500 Subject: [PATCH 063/459] [CIFS] Provide sane values for nlink Since we don't get info about the number of links from the readdir linfo levels, stat() will return 0 for st_nlink, and in particular, samba re-exported shares will show directories as files (as samba is keying off st_nlink before evaluating how to set the dos modebits) when doing a dir or ls. Copy nlink to the inode, unless it wasn't provided. Provide sane values if we don't have an existing one and none was provided. Signed-off-by: Jim McDonough Reviewed-by: Jeff Layton Reviewed-by: David Disseldorp Signed-off-by: Steve French --- fs/cifs/cifsglob.h | 1 + fs/cifs/inode.c | 45 +++++++++++++++++++++++++++++++++++++++------ fs/cifs/readdir.c | 3 +++ 3 files changed, 43 insertions(+), 6 deletions(-) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 9c72be6fb0df..52b6f6c26bfc 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -1268,6 +1268,7 @@ struct dfs_info3_param { #define CIFS_FATTR_DELETE_PENDING 0x2 #define CIFS_FATTR_NEED_REVAL 0x4 #define CIFS_FATTR_INO_COLLISION 0x8 +#define CIFS_FATTR_UNKNOWN_NLINK 0x10 struct cifs_fattr { u32 cf_flags; diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index f9ff9c173f78..867b7cdc794a 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -120,6 +120,33 @@ cifs_revalidate_cache(struct inode *inode, struct cifs_fattr *fattr) cifs_i->invalid_mapping = true; } +/* + * copy nlink to the inode, unless it wasn't provided. Provide + * sane values if we don't have an existing one and none was provided + */ +static void +cifs_nlink_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) +{ + /* + * if we're in a situation where we can't trust what we + * got from the server (readdir, some non-unix cases) + * fake reasonable values + */ + if (fattr->cf_flags & CIFS_FATTR_UNKNOWN_NLINK) { + /* only provide fake values on a new inode */ + if (inode->i_state & I_NEW) { + if (fattr->cf_cifsattrs & ATTR_DIRECTORY) + set_nlink(inode, 2); + else + set_nlink(inode, 1); + } + return; + } + + /* we trust the server, so update it */ + set_nlink(inode, fattr->cf_nlink); +} + /* populate an inode with info from a cifs_fattr struct */ void cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) @@ -134,7 +161,7 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) inode->i_mtime = fattr->cf_mtime; inode->i_ctime = fattr->cf_ctime; inode->i_rdev = fattr->cf_rdev; - set_nlink(inode, fattr->cf_nlink); + cifs_nlink_fattr_to_inode(inode, fattr); inode->i_uid = fattr->cf_uid; inode->i_gid = fattr->cf_gid; @@ -541,6 +568,7 @@ cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info, fattr->cf_bytes = le64_to_cpu(info->AllocationSize); fattr->cf_createtime = le64_to_cpu(info->CreationTime); + fattr->cf_nlink = le32_to_cpu(info->NumberOfLinks); if (fattr->cf_cifsattrs & ATTR_DIRECTORY) { fattr->cf_mode = S_IFDIR | cifs_sb->mnt_dir_mode; fattr->cf_dtype = DT_DIR; @@ -548,7 +576,8 @@ cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info, * Server can return wrong NumberOfLinks value for directories * when Unix extensions are disabled - fake it. */ - fattr->cf_nlink = 2; + if (!tcon->unix_ext) + fattr->cf_flags |= CIFS_FATTR_UNKNOWN_NLINK; } else if (fattr->cf_cifsattrs & ATTR_REPARSE) { fattr->cf_mode = S_IFLNK; fattr->cf_dtype = DT_LNK; @@ -561,11 +590,15 @@ cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info, if (fattr->cf_cifsattrs & ATTR_READONLY) fattr->cf_mode &= ~(S_IWUGO); - fattr->cf_nlink = le32_to_cpu(info->NumberOfLinks); - if (fattr->cf_nlink < 1) { - cifs_dbg(1, "replacing bogus file nlink value %u\n", + /* + * Don't accept zero nlink from non-unix servers unless + * delete is pending. Instead mark it as unknown. + */ + if ((fattr->cf_nlink < 1) && !tcon->unix_ext && + !info->DeletePending) { + cifs_dbg(1, "bogus file nlink value %u\n", fattr->cf_nlink); - fattr->cf_nlink = 1; + fattr->cf_flags |= CIFS_FATTR_UNKNOWN_NLINK; } } diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 42ef03be089f..53a75f3d0179 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -180,6 +180,9 @@ cifs_fill_common_info(struct cifs_fattr *fattr, struct cifs_sb_info *cifs_sb) fattr->cf_dtype = DT_REG; } + /* non-unix readdir doesn't provide nlink */ + fattr->cf_flags |= CIFS_FATTR_UNKNOWN_NLINK; + if (fattr->cf_cifsattrs & ATTR_READONLY) fattr->cf_mode &= ~S_IWUGO; From df1d0584b2292df5b9d576d7e5246e94616220a1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 29 Aug 2013 17:14:49 +0200 Subject: [PATCH 064/459] ARM: shmobile: update SDHI DT compatibility string to the - format Currently DT compatibility strings of both types can be found in the kernel sources: - and -, whereas a unique format should be followed and the former one is preferred. This patch converts the SDHI MMC driver and its users to the common standard. This is safe for now, since ATM no real products are using this driver with DT. Signed-off-by: Guennadi Liakhovetski Acked-by: Chris Ball [Removed r8a7740.dtsi portion as it is not applicable] Signed-off-by: Simon Horman --- .../devicetree/bindings/mmc/tmio_mmc.txt | 17 ++++++++++------- arch/arm/boot/dts/r8a73a4.dtsi | 6 +++--- arch/arm/boot/dts/r8a7790.dtsi | 8 ++++---- arch/arm/boot/dts/sh73a0.dtsi | 6 +++--- drivers/mmc/host/sh_mobile_sdhi.c | 16 ++++++++-------- 5 files changed, 28 insertions(+), 25 deletions(-) diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index df204e18e030..6a2a1160a70d 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -9,12 +9,15 @@ compulsory and any optional properties, common to all SD/MMC drivers, as described in mmc.txt, can be used. Additionally the following tmio_mmc-specific optional bindings can be used. +Required properties: +- compatible: "renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit + "renesas,sdhi-sh7372" - SDHI IP on SH7372 SoC + "renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC + "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC + "renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC + "renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC + "renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC + "renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC + Optional properties: - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable - -When used with Renesas SDHI hardware, the following compatibility strings -configure various model-specific properties: - -"renesas,sh7372-sdhi": (default) compatible with SH7372 -"renesas,r8a7740-sdhi": compatible with R8A7740: certain MMC/SD commands have to - wait for the interface to become idle. diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 6c26caa880f2..658fcc537576 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -193,7 +193,7 @@ }; sdhi0: sdhi@ee100000 { - compatible = "renesas,r8a73a4-sdhi"; + compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 165 4>; @@ -202,7 +202,7 @@ }; sdhi1: sdhi@ee120000 { - compatible = "renesas,r8a73a4-sdhi"; + compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee120000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 166 4>; @@ -211,7 +211,7 @@ }; sdhi2: sdhi@ee140000 { - compatible = "renesas,r8a73a4-sdhi"; + compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee140000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 167 4>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 3b879e7c697c..885f9f4bf26f 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -152,7 +152,7 @@ }; sdhi0: sdhi@ee100000 { - compatible = "renesas,r8a7790-sdhi"; + compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee100000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 165 4>; @@ -161,7 +161,7 @@ }; sdhi1: sdhi@ee120000 { - compatible = "renesas,r8a7790-sdhi"; + compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee120000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 166 4>; @@ -170,7 +170,7 @@ }; sdhi2: sdhi@ee140000 { - compatible = "renesas,r8a7790-sdhi"; + compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee140000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 167 4>; @@ -179,7 +179,7 @@ }; sdhi3: sdhi@ee160000 { - compatible = "renesas,r8a7790-sdhi"; + compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee160000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 168 4>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index ba59a5875a10..3955c7606a6f 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -196,7 +196,7 @@ }; sdhi0: sdhi@ee100000 { - compatible = "renesas,r8a7740-sdhi"; + compatible = "renesas,sdhi-r8a7740"; reg = <0xee100000 0x100>; interrupt-parent = <&gic>; interrupts = <0 83 4 @@ -208,7 +208,7 @@ /* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */ sdhi1: sdhi@ee120000 { - compatible = "renesas,r8a7740-sdhi"; + compatible = "renesas,sdhi-r8a7740"; reg = <0xee120000 0x100>; interrupt-parent = <&gic>; interrupts = <0 88 4 @@ -219,7 +219,7 @@ }; sdhi2: sdhi@ee140000 { - compatible = "renesas,r8a7740-sdhi"; + compatible = "renesas,sdhi-r8a7740"; reg = <0xee140000 0x100>; interrupt-parent = <&gic>; interrupts = <0 104 4 diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index 87ed3fb5149a..f344659dceac 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -113,14 +113,14 @@ static const struct sh_mobile_sdhi_ops sdhi_ops = { }; static const struct of_device_id sh_mobile_sdhi_of_match[] = { - { .compatible = "renesas,shmobile-sdhi" }, - { .compatible = "renesas,sh7372-sdhi" }, - { .compatible = "renesas,sh73a0-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], }, - { .compatible = "renesas,r8a73a4-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], }, - { .compatible = "renesas,r8a7740-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], }, - { .compatible = "renesas,r8a7778-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], }, - { .compatible = "renesas,r8a7779-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], }, - { .compatible = "renesas,r8a7790-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], }, + { .compatible = "renesas,sdhi-shmobile" }, + { .compatible = "renesas,sdhi-sh7372" }, + { .compatible = "renesas,sdhi-sh73a0", .data = &sh_mobile_sdhi_of_cfg[0], }, + { .compatible = "renesas,sdhi-r8a73a4", .data = &sh_mobile_sdhi_of_cfg[0], }, + { .compatible = "renesas,sdhi-r8a7740", .data = &sh_mobile_sdhi_of_cfg[0], }, + { .compatible = "renesas,sdhi-r8a7778", .data = &sh_mobile_sdhi_of_cfg[0], }, + { .compatible = "renesas,sdhi-r8a7779", .data = &sh_mobile_sdhi_of_cfg[0], }, + { .compatible = "renesas,sdhi-r8a7790", .data = &sh_mobile_sdhi_of_cfg[0], }, {}, }; MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match); From 48c8b96f21817aad695246ef020b849d466cc502 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 14 Sep 2013 04:29:22 +0400 Subject: [PATCH 065/459] ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixup Currently on the Lager board NFS timeouts/delays are seen when booting. That turned out to happen because the SoC's ETH_LINK signal turns on and off after each packet. It is connected to Micrel KSZ8041 PHY's LED0 signal. Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds to non-default 01 setting of the PHY control register 1 bits 14-15. The 'sh_eth' driver resets the PHY when opening the network device, so we have to set the mentioned bits back to 01 from the default 00 value which causes bouncing of ETH_LINK. That can be achieved using the PHY platform fixup mechanism if we also modify the driver to use it.. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-lager.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index ffb6f0ac7606..5930af8d434f 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -155,6 +156,30 @@ static void __init lager_add_standard_devices(void) ðer_pdata, sizeof(ether_pdata)); } +/* + * Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds + * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits + * 14-15. We have to set them back to 01 from the default 00 value each time + * the PHY is reset. It's also important because the PHY's LED0 signal is + * connected to SoC's ETH_LINK signal and in the PHY's default mode it will + * bounce on and off after each packet, which we apparently want to avoid. + */ +static int lager_ksz8041_fixup(struct phy_device *phydev) +{ + u16 phyctrl1 = phy_read(phydev, 0x1e); + + phyctrl1 &= ~0xc000; + phyctrl1 |= 0x4000; + return phy_write(phydev, 0x1e, phyctrl1); +} + +static void __init lager_init(void) +{ + lager_add_standard_devices(); + + phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup); +} + static const char *lager_boards_compat_dt[] __initdata = { "renesas,lager", NULL, @@ -163,6 +188,6 @@ static const char *lager_boards_compat_dt[] __initdata = { DT_MACHINE_START(LAGER_DT, "lager") .init_early = r8a7790_init_delay, .init_time = r8a7790_timer_init, - .init_machine = lager_add_standard_devices, + .init_machine = lager_init, .dt_compat = lager_boards_compat_dt, MACHINE_END From 7cd402b30a701c2b4d38a98281a00fc5e3680b13 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 1 Sep 2013 20:33:49 -0700 Subject: [PATCH 066/459] ARM: shmobile: armadillo: fixup ether pinctrl naming e5c9b4cd665106d9b5397114ea81a53059410b6a ("sh_eth: get R8A7740 support out of #ifdef") exchanged sh-eth driver name to r8a7740-gether, but, eva_pinctrl_map[] didn't follow it. Fixes it. Signed-off-by: Kuninori Morimoto Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-armadillo800eva.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 5bd1479d3deb..7f8f6076d360 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1108,9 +1108,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = { PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740", "fsib_mclk_in", "fsib"), /* GETHER */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740", + PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740", "gether_mii", "gether"), - PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740", + PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740", "gether_int", "gether"), /* HDMI */ PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740", From 01eb2d18fd5d7b1539b0023790bc3101aeee522c Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 11 Sep 2013 15:51:01 +0200 Subject: [PATCH 067/459] gpio: rcar: Remove #gpio-range-cells DT property usage Commit a1bc260bb5f5d95da854be7898202d788e94448d ("gpio: clean up gpio-ranges documentation") deprecated the #gpio-range-cells property. Replace its usage with a hardcoded value in the gpio-rcar driver. Signed-off-by: Laurent Pinchart Acked-by: Linus Walleij Signed-off-by: Simon Horman --- drivers/gpio/gpio-rcar.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index e3745eb07570..6038966ab045 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -293,10 +293,9 @@ static void gpio_rcar_parse_pdata(struct gpio_rcar_priv *p) if (pdata) { p->config = *pdata; } else if (IS_ENABLED(CONFIG_OF) && np) { - ret = of_parse_phandle_with_args(np, "gpio-ranges", - "#gpio-range-cells", 0, &args); - p->config.number_of_pins = ret == 0 && args.args_count == 3 - ? args.args[2] + ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, + &args); + p->config.number_of_pins = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK; p->config.gpio_base = -1; } From 3786f86b60833f32e3eeb016fcf8c324f8147e00 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 11 Sep 2013 15:51:02 +0200 Subject: [PATCH 068/459] ARM: shmobile: Remove #gpio-ranges-cells DT property This property is no longer required by the GPIO binding. Remove it. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7778.dtsi | 1 - arch/arm/boot/dts/r8a7779.dtsi | 1 - arch/arm/boot/dts/r8a7790.dtsi | 1 - 3 files changed, 3 deletions(-) diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 45ac404ab6d8..3577aba82583 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -96,6 +96,5 @@ pfc: pfc@fffc0000 { compatible = "renesas,pfc-r8a7778"; reg = <0xfffc000 0x118>; - #gpio-range-cells = <3>; }; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 23a62447359c..ebbe507fcbfa 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -188,7 +188,6 @@ pfc: pfc@fffc0000 { compatible = "renesas,pfc-r8a7779"; reg = <0xfffc0000 0x23c>; - #gpio-range-cells = <3>; }; thermal@ffc48000 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 885f9f4bf26f..413b4c29e782 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -148,7 +148,6 @@ pfc: pfc@e6060000 { compatible = "renesas,pfc-r8a7790"; reg = <0 0xe6060000 0 0x250>; - #gpio-range-cells = <3>; }; sdhi0: sdhi@ee100000 { From b6a9c1ef3d82c1efb66340a27e810bad63e046ed Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 22 Sep 2013 14:59:22 +0300 Subject: [PATCH 069/459] bnx2x: Generalize KR work-around Previously, in case of KR link down, the driver would reset the PHY and restart auto negotiation only when old Warpcore microcode was used (below D108). This patch comes to generalize this by keep trying to restart KR link, regardless of Warpcore microcode, since it was found that it solves another link issue which source is a link-partner. As part of this change, the signal detect is no longer a condition to apply the work-around to cover this new case. Like before, as long as the link is down, AN will be restarted every 2 seconds. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_link.c | 32 +++++-------------- 1 file changed, 8 insertions(+), 24 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index d60a2ea3da19..12ef8e1a2dad 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3715,7 +3715,6 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { u16 lane, i, cl72_ctrl, an_adv = 0; - u16 ucode_ver; struct bnx2x *bp = params->bp; static struct bnx2x_reg_set reg_set[] = { {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, @@ -3806,15 +3805,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, /* Advertise pause */ bnx2x_ext_phy_set_pause(params, phy, vars); - /* Set KR Autoneg Work-Around flag for Warpcore version older than D108 - */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_UC_INFO_B1_VERSION, &ucode_ver); - if (ucode_ver < 0xd108) { - DP(NETIF_MSG_LINK, "Enable AN KR work-around. WC ver:0x%x\n", - ucode_ver); - vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; - } + vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0x100); @@ -4347,20 +4338,14 @@ static void bnx2x_warpcore_config_runtime(struct bnx2x_phy *phy, struct bnx2x *bp = params->bp; u32 serdes_net_if; u16 gp_status1 = 0, lnkup = 0, lnkup_kr = 0; - u16 lane = bnx2x_get_warpcore_lane(phy, params); vars->turn_to_run_wc_rt = vars->turn_to_run_wc_rt ? 0 : 1; if (!vars->turn_to_run_wc_rt) return; - /* Return if there is no link partner */ - if (!(bnx2x_warpcore_get_sigdet(phy, params))) { - DP(NETIF_MSG_LINK, "bnx2x_warpcore_get_sigdet false\n"); - return; - } - if (vars->rx_tx_asic_rst) { + u16 lane = bnx2x_get_warpcore_lane(phy, params); serdes_net_if = (REG_RD(bp, params->shmem_base + offsetof(struct shmem_region, dev_info. port_hw_config[params->port].default_cfg)) & @@ -4375,14 +4360,8 @@ static void bnx2x_warpcore_config_runtime(struct bnx2x_phy *phy, /*10G KR*/ lnkup_kr = (gp_status1 >> (12+lane)) & 0x1; - DP(NETIF_MSG_LINK, - "gp_status1 0x%x\n", gp_status1); - if (lnkup_kr || lnkup) { - vars->rx_tx_asic_rst = 0; - DP(NETIF_MSG_LINK, - "link up, rx_tx_asic_rst 0x%x\n", - vars->rx_tx_asic_rst); + vars->rx_tx_asic_rst = 0; } else { /* Reset the lane to see if link comes up.*/ bnx2x_warpcore_reset_lane(bp, phy, 1); @@ -5757,6 +5736,11 @@ static int bnx2x_warpcore_read_status(struct bnx2x_phy *phy, rc = bnx2x_get_link_speed_duplex(phy, params, vars, link_up, gp_speed, duplex); + /* In case of KR link down, start up the recovering procedure */ + if ((!link_up) && (phy->media_type == ETH_PHY_KR) && + (!(phy->flags & FLAGS_WC_DUAL_MODE))) + vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; + DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x link_status 0x%x\n", vars->duplex, vars->flow_ctrl, vars->link_status); return rc; From 4e4b14c9f861e19e560abb4a12eca971568639f5 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 22 Sep 2013 14:59:23 +0300 Subject: [PATCH 070/459] bnx2x: KR2 disablement fix Relocate bnx2x_disable_kr2 function, and use it to disable KR2 in case it is not configured in order to clear it's configuration, otherwise the link may come up at 20G instead of the requested 10G-KR. In addition, restart AN after disabling KR2 as part of the KR2 work-around. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_link.c | 76 ++++++++++--------- 1 file changed, 39 insertions(+), 37 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 12ef8e1a2dad..84798bb8c020 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3684,6 +3684,41 @@ static void bnx2x_warpcore_enable_AN_KR2(struct bnx2x_phy *phy, bnx2x_update_link_attr(params, vars->link_attr_sync); } +static void bnx2x_disable_kr2(struct link_params *params, + struct link_vars *vars, + struct bnx2x_phy *phy) +{ + struct bnx2x *bp = params->bp; + int i; + static struct bnx2x_reg_set reg_set[] = { + /* Step 1 - Program the TX/RX alignment markers */ + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0x7690}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xe647}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0xc4f0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0x7690}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xe647}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0xc4f0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000c}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0002}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x0000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x0af7}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x0af7}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0002}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0000} + }; + DP(NETIF_MSG_LINK, "Disabling 20G-KR2\n"); + + for (i = 0; i < ARRAY_SIZE(reg_set); i++) + bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, + reg_set[i].val); + vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE; + bnx2x_update_link_attr(params, vars->link_attr_sync); + + vars->check_kr2_recovery_cnt = CHECK_KR2_RECOVERY_CNT; +} + static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy, struct link_params *params) { @@ -3829,6 +3864,8 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, bnx2x_set_aer_mmd(params, phy); bnx2x_warpcore_enable_AN_KR2(phy, params, vars); + } else { + bnx2x_disable_kr2(params, vars, phy); } /* Enable Autoneg: only on the main lane */ @@ -13416,43 +13453,6 @@ static void bnx2x_sfp_tx_fault_detection(struct bnx2x_phy *phy, } } } -static void bnx2x_disable_kr2(struct link_params *params, - struct link_vars *vars, - struct bnx2x_phy *phy) -{ - struct bnx2x *bp = params->bp; - int i; - static struct bnx2x_reg_set reg_set[] = { - /* Step 1 - Program the TX/RX alignment markers */ - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0x7690}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xe647}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0xc4f0}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0x7690}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xe647}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0xc4f0}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000c}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6000}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0000}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0002}, - {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x0000}, - {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x0af7}, - {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x0af7}, - {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0002}, - {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0000} - }; - DP(NETIF_MSG_LINK, "Disabling 20G-KR2\n"); - - for (i = 0; i < ARRAY_SIZE(reg_set); i++) - bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, - reg_set[i].val); - vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE; - bnx2x_update_link_attr(params, vars->link_attr_sync); - - vars->check_kr2_recovery_cnt = CHECK_KR2_RECOVERY_CNT; - /* Restart AN on leading lane */ - bnx2x_warpcore_restart_AN_KR(phy, params); -} - static void bnx2x_kr2_recovery(struct link_params *params, struct link_vars *vars, struct bnx2x_phy *phy) @@ -13530,6 +13530,8 @@ static void bnx2x_check_kr2_wa(struct link_params *params, /* Disable KR2 on both lanes */ DP(NETIF_MSG_LINK, "BP=0x%x, NP=0x%x\n", base_page, next_page); bnx2x_disable_kr2(params, vars, phy); + /* Restart AN on leading lane */ + bnx2x_warpcore_restart_AN_KR(phy, params); return; } } From 0afbd74a1608d9d9dcc8f806e36e283ec83e07d5 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 22 Sep 2013 14:59:24 +0300 Subject: [PATCH 071/459] bnx2x: 57840 non-external loopback test fail on 1G when 1G-optic module was plugged in, internal loopback test failed because the driver used to check the optic module (with no need), and for 1G optic module, the link speed was forced down to 1G, while the XMAC (10G MAC) was enabled. This patch avoid accessing optic module in case internal loopback was selected, and update the link speed in case 1G optic module was detected during init stage. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_link.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 84798bb8c020..5c6d46c61942 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -4523,10 +4523,14 @@ static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy, * enabled transmitter to avoid current leakage in case * no module is connected */ - if (bnx2x_is_sfp_module_plugged(phy, params)) - bnx2x_sfp_module_detection(phy, params); - else - bnx2x_sfp_e3_set_transmitter(params, phy, 1); + if ((params->loopback_mode == LOOPBACK_NONE) || + (params->loopback_mode == LOOPBACK_EXT)) { + if (bnx2x_is_sfp_module_plugged(phy, params)) + bnx2x_sfp_module_detection(phy, params); + else + bnx2x_sfp_e3_set_transmitter(params, + phy, 1); + } bnx2x_warpcore_config_sfi(phy, params); break; @@ -6528,6 +6532,11 @@ static int bnx2x_link_initialize(struct link_params *params, params->phy[INT_PHY].config_init(phy, params, vars); } + /* Re-read this value in case it was changed inside config_init due to + * limitations of optic module + */ + vars->line_speed = params->phy[INT_PHY].req_line_speed; + /* Init external phy*/ if (non_ext_phy) { if (params->phy[INT_PHY].supported & From 869952e350411a769f339da913ec73c4d3f18ec2 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 22 Sep 2013 14:59:25 +0300 Subject: [PATCH 072/459] bnx2x: Specific Active-DAC is not detected on 57810 Fix Warpcore mode setting when active DAC (Direct Attached Cable) is detected. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 5c6d46c61942..dc67566645d2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -175,6 +175,7 @@ typedef int (*read_sfp_module_eeprom_func_p)(struct bnx2x_phy *phy, #define EDC_MODE_LINEAR 0x0022 #define EDC_MODE_LIMITING 0x0044 #define EDC_MODE_PASSIVE_DAC 0x0055 +#define EDC_MODE_ACTIVE_DAC 0x0066 /* ETS defines*/ #define DCBX_INVALID_COS (0xFF) @@ -8110,7 +8111,10 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, if (copper_module_type & SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) { DP(NETIF_MSG_LINK, "Active Copper cable detected\n"); - check_limiting_mode = 1; + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + *edc_mode = EDC_MODE_ACTIVE_DAC; + else + check_limiting_mode = 1; } else if (copper_module_type & SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) { DP(NETIF_MSG_LINK, @@ -8585,6 +8589,7 @@ static void bnx2x_warpcore_set_limiting_mode(struct link_params *params, mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT; break; case EDC_MODE_PASSIVE_DAC: + case EDC_MODE_ACTIVE_DAC: mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC; break; default: From 343f7dc4301e554d547c28f9583c8a193f7abb88 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 22 Sep 2013 14:59:26 +0300 Subject: [PATCH 073/459] bnx2x: Fix 848xx duplex settings On 848xx PHY (10G-baseT), half-duplex was always advertised regardless of the actual configuration. Change the 848xx duplex settings to advertise half-duplex only if configured. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_link.c | 57 +++++++++++-------- 1 file changed, 33 insertions(+), 24 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index dc67566645d2..51468227bf3b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -9765,32 +9765,41 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL, an_1000_val); - /* set 100 speed advertisement */ - if ((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))) { - an_10_100_val |= (1<<7); - /* Enable autoneg and restart autoneg for legacy speeds */ - autoneg_val |= (1<<9 | 1<<12); - - if (phy->req_duplex == DUPLEX_FULL) + /* Set 10/100 speed advertisement */ + if (phy->req_line_speed == SPEED_AUTO_NEG) { + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) { + /* Enable autoneg and restart autoneg for legacy speeds + */ + autoneg_val |= (1<<9 | 1<<12); an_10_100_val |= (1<<8); - DP(NETIF_MSG_LINK, "Advertising 100M\n"); - } - /* set 10 speed advertisement */ - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) && - (phy->supported & - (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full)))) { - an_10_100_val |= (1<<5); - autoneg_val |= (1<<9 | 1<<12); - if (phy->req_duplex == DUPLEX_FULL) + DP(NETIF_MSG_LINK, "Advertising 100M-FD\n"); + } + + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) { + /* Enable autoneg and restart autoneg for legacy speeds + */ + autoneg_val |= (1<<9 | 1<<12); + an_10_100_val |= (1<<7); + DP(NETIF_MSG_LINK, "Advertising 100M-HD\n"); + } + + if ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) && + (phy->supported & SUPPORTED_10baseT_Full)) { an_10_100_val |= (1<<6); - DP(NETIF_MSG_LINK, "Advertising 10M\n"); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 10M-FD\n"); + } + + if ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) && + (phy->supported & SUPPORTED_10baseT_Half)) { + an_10_100_val |= (1<<5); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 10M-HD\n"); + } } /* Only 10/100 are allowed to work in FORCE mode */ From 3b59e432ec9c093311e0ad057e330e04feb79007 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Vincent=20Stehl=C3=A9?= Date: Mon, 16 Sep 2013 22:50:32 +0200 Subject: [PATCH 074/459] pinctrl: fix pinconf_dbg_config_write return type MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Have pinconf_dbg_config_write() return a ssize_t. This fixes the following compilation warning: drivers/pinctrl/pinconf.c:617:2: warning: initialization from incompatible pointer type [enabled by default] drivers/pinctrl/pinconf.c:617:2: warning: (near initialization for ‘pinconf_dbg_pinconfig_fops.write’) [enabled by default] Signed-off-by: Vincent Stehlé Cc: Linus Walleij Signed-off-by: Linus Walleij --- drivers/pinctrl/pinconf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index a138965c01cb..1664e7865b9d 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -490,7 +490,7 @@ exit: * are values that should match the pinctrl-maps * reflects the new config and is driver dependant */ -static int pinconf_dbg_config_write(struct file *file, +static ssize_t pinconf_dbg_config_write(struct file *file, const char __user *user_buf, size_t count, loff_t *ppos) { struct pinctrl_maps *maps_node; From 81d36c4fff7401b099d98818a517ee6bc02e93f2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 17 Sep 2013 13:47:54 +0300 Subject: [PATCH 075/459] pinctrl: remove an unnecessary cast sizeof() is already size_t so there is no need to cast here. Generally, casting inside the min() macro instead of using min_t() is considered bad style. Signed-off-by: Dan Carpenter Signed-off-by: Linus Walleij --- drivers/pinctrl/pinconf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index 1664e7865b9d..b8fcc38c0d11 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -508,7 +508,7 @@ static ssize_t pinconf_dbg_config_write(struct file *file, int i; /* Get userspace string and assure termination */ - buf_size = min(count, (size_t)(sizeof(buf)-1)); + buf_size = min(count, sizeof(buf) - 1); if (copy_from_user(buf, user_buf, buf_size)) return -EFAULT; buf[buf_size] = 0; From 47d06e532e95b71c0db3839ebdef3fe8812fca2c Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 10 Sep 2013 10:52:35 -0400 Subject: [PATCH 076/459] random: run random_int_secret_init() run after all late_initcalls The some platforms (e.g., ARM) initializes their clocks as late_initcalls for some unknown reason. So make sure random_int_secret_init() is run after all of the late_initcalls are run. Cc: stable@vger.kernel.org Signed-off-by: "Theodore Ts'o" --- drivers/char/random.c | 3 +-- include/linux/random.h | 1 + init/main.c | 2 ++ 3 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 0d91fe52f3f5..92e6c67e1ae6 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1462,12 +1462,11 @@ struct ctl_table random_table[] = { static u32 random_int_secret[MD5_MESSAGE_BYTES / 4] ____cacheline_aligned; -static int __init random_int_secret_init(void) +int random_int_secret_init(void) { get_random_bytes(random_int_secret, sizeof(random_int_secret)); return 0; } -late_initcall(random_int_secret_init); /* * Get a random word for internal kernel use only. Similar to urandom but diff --git a/include/linux/random.h b/include/linux/random.h index 3b9377d6b7a5..6312dd9ba449 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -17,6 +17,7 @@ extern void add_interrupt_randomness(int irq, int irq_flags); extern void get_random_bytes(void *buf, int nbytes); extern void get_random_bytes_arch(void *buf, int nbytes); void generate_random_uuid(unsigned char uuid_out[16]); +extern int random_int_secret_init(void); #ifndef MODULE extern const struct file_operations random_fops, urandom_fops; diff --git a/init/main.c b/init/main.c index d03d2ec2eacf..586cd3359c02 100644 --- a/init/main.c +++ b/init/main.c @@ -75,6 +75,7 @@ #include #include #include +#include #include #include @@ -778,6 +779,7 @@ static void __init do_basic_setup(void) do_ctors(); usermodehelper_enable(); do_initcalls(); + random_int_secret_init(); } static void __init do_pre_smp_initcalls(void) From f3ef11b485db3fa57e635c64a3fd86533f5e42c8 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 23 Sep 2013 15:54:20 +0800 Subject: [PATCH 077/459] regulator: wm831x-ldo: Fix max_uV for gp_ldo and aldo linear range settings Fix the linear range settings in commit 5ff26a14c3331 "regulator: wm831x-ldo: Convert to use linear ranges". For wm831x_gp_ldo: We have below equations for list voltage before converting to linear ranges: sel <= 0xe: volt = 0.9-1.6V in 50mV steps sel <= 0x1f: volt = 1.7-3.3V in 100mV steps max_uV for the first linear range should be 1600000 rather than 1650000. Fix it. For wm831x_aldo: We have below equations for list voltage before converting to linear ranges: sel <= 0xc: volt = 1-1.6V in 50mV steps sel <= 0x1f volt = 1.7-3.5V in 100mV steps max_uV for the first linear range should be 1600000 rather than 1650000. Fix it. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/wm831x-ldo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index 1432b26ef2e9..2205fbc2c37b 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -63,7 +63,7 @@ static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data) */ static const struct regulator_linear_range wm831x_gp_ldo_ranges[] = { - { .min_uV = 900000, .max_uV = 1650000, .min_sel = 0, .max_sel = 14, + { .min_uV = 900000, .max_uV = 1600000, .min_sel = 0, .max_sel = 14, .uV_step = 50000 }, { .min_uV = 1700000, .max_uV = 3300000, .min_sel = 15, .max_sel = 31, .uV_step = 100000 }, @@ -332,7 +332,7 @@ static struct platform_driver wm831x_gp_ldo_driver = { */ static const struct regulator_linear_range wm831x_aldo_ranges[] = { - { .min_uV = 1000000, .max_uV = 1650000, .min_sel = 0, .max_sel = 12, + { .min_uV = 1000000, .max_uV = 1600000, .min_sel = 0, .max_sel = 12, .uV_step = 50000 }, { .min_uV = 1700000, .max_uV = 3500000, .min_sel = 13, .max_sel = 31, .uV_step = 100000 }, From 8233729853b424778a6f383306159a8df669bdaf Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 23 Sep 2013 16:27:30 +0200 Subject: [PATCH 078/459] usb: gadget: pxa25x_udc: fix deferred probe from __init Move probe out of __init section and don't use platform_driver_probe which cannot be used with deferred probing. Since commit e9354576 ("gpiolib: Defer failed gpio requests by default") this driver might return -EPROBE_DEFER if a gpio_request fails. Cc: Eric Miao Cc: Russell King Cc: Haojian Zhuang Cc: Felipe Balbi Signed-off-by: Johan Hovold Signed-off-by: Felipe Balbi --- drivers/usb/gadget/pxa25x_udc.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index cc9207473dbc..0ac6064aa3b8 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -2054,7 +2054,7 @@ static struct pxa25x_udc memory = { /* * probe - binds to the platform device */ -static int __init pxa25x_udc_probe(struct platform_device *pdev) +static int pxa25x_udc_probe(struct platform_device *pdev) { struct pxa25x_udc *dev = &memory; int retval, irq; @@ -2203,7 +2203,7 @@ static void pxa25x_udc_shutdown(struct platform_device *_dev) pullup_off(); } -static int __exit pxa25x_udc_remove(struct platform_device *pdev) +static int pxa25x_udc_remove(struct platform_device *pdev) { struct pxa25x_udc *dev = platform_get_drvdata(pdev); @@ -2294,7 +2294,8 @@ static int pxa25x_udc_resume(struct platform_device *dev) static struct platform_driver udc_driver = { .shutdown = pxa25x_udc_shutdown, - .remove = __exit_p(pxa25x_udc_remove), + .probe = pxa25x_udc_probe, + .remove = pxa25x_udc_remove, .suspend = pxa25x_udc_suspend, .resume = pxa25x_udc_resume, .driver = { @@ -2303,7 +2304,7 @@ static struct platform_driver udc_driver = { }, }; -module_platform_driver_probe(udc_driver, pxa25x_udc_probe); +module_platform_driver(udc_driver); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell"); From eaaa775b5f934f09b1f6ee91418ed97a8fdf0b7c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 23 Sep 2013 16:27:31 +0200 Subject: [PATCH 079/459] usb: phy: gpio-vbus: fix deferred probe from __init Move probe out of __init section and don't use platform_driver_probe which cannot be used with deferred probing. Since commit e9354576 ("gpiolib: Defer failed gpio requests by default") and 04bf3011 ("regulator: Support driver probe deferral") this driver might return -EPROBE_DEFER if a gpio_request or regulator_get fails. Cc: Felipe Balbi Signed-off-by: Johan Hovold Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-gpio-vbus-usb.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c index b2f29c9aebbf..02799a5efcd4 100644 --- a/drivers/usb/phy/phy-gpio-vbus-usb.c +++ b/drivers/usb/phy/phy-gpio-vbus-usb.c @@ -241,7 +241,7 @@ static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend) /* platform driver interface */ -static int __init gpio_vbus_probe(struct platform_device *pdev) +static int gpio_vbus_probe(struct platform_device *pdev) { struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev); struct gpio_vbus_data *gpio_vbus; @@ -349,7 +349,7 @@ err_gpio: return err; } -static int __exit gpio_vbus_remove(struct platform_device *pdev) +static int gpio_vbus_remove(struct platform_device *pdev) { struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev); @@ -398,8 +398,6 @@ static const struct dev_pm_ops gpio_vbus_dev_pm_ops = { }; #endif -/* NOTE: the gpio-vbus device may *NOT* be hotplugged */ - MODULE_ALIAS("platform:gpio-vbus"); static struct platform_driver gpio_vbus_driver = { @@ -410,10 +408,11 @@ static struct platform_driver gpio_vbus_driver = { .pm = &gpio_vbus_dev_pm_ops, #endif }, - .remove = __exit_p(gpio_vbus_remove), + .probe = gpio_vbus_probe, + .remove = gpio_vbus_remove, }; -module_platform_driver_probe(gpio_vbus_driver, gpio_vbus_probe); +module_platform_driver(gpio_vbus_driver); MODULE_DESCRIPTION("simple GPIO controlled OTG transceiver driver"); MODULE_AUTHOR("Philipp Zabel"); From 4c868664344d0022699353ff324bf9eb39643265 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Mon, 23 Sep 2013 10:12:50 +0300 Subject: [PATCH 080/459] bnx2x: Prevent mistaken hangup between driver & FW When system CPU is stressed it's possible that the driver will not be able to pulse the FW every second, which will cause the log to be filled with error messages. Increasing the threshold to 5 seconds seems to be enough to eliminate the issue. Signed-off-by: Eilon Greenstein Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index a6704b555042..f403c6be51de 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -5447,26 +5447,24 @@ static void bnx2x_timer(unsigned long data) if (IS_PF(bp) && !BP_NOMCP(bp)) { int mb_idx = BP_FW_MB_IDX(bp); - u32 drv_pulse; - u32 mcp_pulse; + u16 drv_pulse; + u16 mcp_pulse; ++bp->fw_drv_pulse_wr_seq; bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK; - /* TBD - add SYSTEM_TIME */ drv_pulse = bp->fw_drv_pulse_wr_seq; bnx2x_drv_pulse(bp); mcp_pulse = (SHMEM_RD(bp, func_mb[mb_idx].mcp_pulse_mb) & MCP_PULSE_SEQ_MASK); /* The delta between driver pulse and mcp response - * should be 1 (before mcp response) or 0 (after mcp response) + * should not get too big. If the MFW is more than 5 pulses + * behind, we should worry about it enough to generate an error + * log. */ - if ((drv_pulse != mcp_pulse) && - (drv_pulse != ((mcp_pulse + 1) & MCP_PULSE_SEQ_MASK))) { - /* someone lost a heartbeat... */ - BNX2X_ERR("drv_pulse (0x%x) != mcp_pulse (0x%x)\n", + if (((drv_pulse - mcp_pulse) & MCP_PULSE_SEQ_MASK) > 5) + BNX2X_ERR("MFW seems hanged: drv_pulse (0x%x) != mcp_pulse (0x%x)\n", drv_pulse, mcp_pulse); - } } if (bp->state == BNX2X_STATE_OPEN) From 9ea75ded3f5c6d3e3041d4495f36d95da0016da8 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Mon, 23 Sep 2013 10:12:51 +0300 Subject: [PATCH 081/459] bnx2x: Fix support for VFs on some PFs Due to incorrect usage of PF macros when reading information relating to interrupts, some PFs were erroneously unable to support VFs. Signed-off-by: Ariel Elior Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 2604b6204abe..d9370d44559e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -1819,7 +1819,7 @@ bnx2x_get_vf_igu_cam_info(struct bnx2x *bp) fid = GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID); if (fid & IGU_FID_ENCODE_IS_PF) current_pf = fid & IGU_FID_PF_NUM_MASK; - else if (current_pf == BP_ABS_FUNC(bp)) + else if (current_pf == BP_FUNC(bp)) bnx2x_vf_set_igu_info(bp, sb_id, (fid & IGU_FID_VF_NUM_MASK)); DP(BNX2X_MSG_IOV, "%s[%d], igu_sb_id=%d, msix=%d\n", From 717fa2b9012c980f5578bb406d21efe5c2ea3ed7 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Mon, 23 Sep 2013 10:12:52 +0300 Subject: [PATCH 082/459] bnx2x: add missing VF resource allocation during init bnx2x_iov_static_resc() should be called after IGU was read for information on the number of available VFs, so that resources will be correctly set. Signed-off-by: Ariel Elior Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index d9370d44559e..9ad012bdd915 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -3180,6 +3180,7 @@ int bnx2x_enable_sriov(struct bnx2x *bp) /* set local queue arrays */ vf->vfqs = &bp->vfdb->vfqs[qcount]; qcount += vf_sb_count(vf); + bnx2x_iov_static_resc(bp, vf); } /* prepare msix vectors in VF configuration space */ @@ -3187,6 +3188,8 @@ int bnx2x_enable_sriov(struct bnx2x *bp) bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf_idx)); REG_WR(bp, PCICFG_OFFSET + GRC_CONFIG_REG_VF_MSIX_CONTROL, num_vf_queues); + DP(BNX2X_MSG_IOV, "set msix vec num in VF %d cfg space to %d\n", + vf_idx, num_vf_queues); } bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); From d9d81862671a7d139a7944090a7fe4647fc8f8d8 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 23 Sep 2013 10:12:53 +0300 Subject: [PATCH 083/459] bnx2x: prevent masking error from cnic During error flows while loading cnic the return value was incorrectly replaced by that of bnx2x_set_real_num_queues(); If that function was to finish successfully then the cnic would have mistakenly thought the load ended successfully, causing issues (& panics) later on. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 61726af1de6e..e66beff2704d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2481,8 +2481,7 @@ load_error_cnic2: load_error_cnic1: bnx2x_napi_disable_cnic(bp); /* Update the number of queues without the cnic queues */ - rc = bnx2x_set_real_num_queues(bp, 0); - if (rc) + if (bnx2x_set_real_num_queues(bp, 0)) BNX2X_ERR("Unable to set real_num_queues not including cnic\n"); load_error_cnic0: BNX2X_ERR("CNIC-related load failed\n"); From 0a5ccb759dc6cf17591e8b77d1fe0b52c2cf706d Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 23 Sep 2013 10:12:54 +0300 Subject: [PATCH 084/459] bnx2x: prevent masked MCP parities from appearing During flows which mask block attentions (e.g., register dump) all parities are masked. However, unlike other blocks the MCP's attention is not masked inside the block but rather the indication to the driver. If another attention (e.g., link change) will occour while there's an MCP parity, the driver will ignore the fact that the parity is masked and erroneously report a parity. This patch forces the driver to read the MCP masking while checking for parities. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index f403c6be51de..82b658d8c04c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -4703,6 +4703,14 @@ bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print) attn.sig[3] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port*4); + /* Since MCP attentions can't be disabled inside the block, we need to + * read AEU registers to see whether they're currently disabled + */ + attn.sig[3] &= ((REG_RD(bp, + !port ? MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 + : MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0) & + MISC_AEU_ENABLE_MCP_PRTY_BITS) | + ~MISC_AEU_ENABLE_MCP_PRTY_BITS); if (!CHIP_IS_E1x(bp)) attn.sig[4] = REG_RD(bp, From cbbf77de646664774cec8726681a991565a6bac5 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Mon, 23 Sep 2013 10:12:55 +0300 Subject: [PATCH 085/459] bnx2x: handle known but unsupported VF messages Commit b9871bcf "bnx2x: VF RSS support - PF side" has deprecated one of the previous existing messages. If an old VF driver were to send this message to the PF then the PF will not reply and leave the mailbox in an unsteady state (and cause a timeout on the VF side). Wait until firmware ack is written before unlocking channel Signed-off-by: Ariel Elior Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 50 +++++++++---------- 1 file changed, 24 insertions(+), 26 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 6cfb88732452..da16953eb2ec 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -1765,28 +1765,28 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, switch (mbx->first_tlv.tl.type) { case CHANNEL_TLV_ACQUIRE: bnx2x_vf_mbx_acquire(bp, vf, mbx); - break; + return; case CHANNEL_TLV_INIT: bnx2x_vf_mbx_init_vf(bp, vf, mbx); - break; + return; case CHANNEL_TLV_SETUP_Q: bnx2x_vf_mbx_setup_q(bp, vf, mbx); - break; + return; case CHANNEL_TLV_SET_Q_FILTERS: bnx2x_vf_mbx_set_q_filters(bp, vf, mbx); - break; + return; case CHANNEL_TLV_TEARDOWN_Q: bnx2x_vf_mbx_teardown_q(bp, vf, mbx); - break; + return; case CHANNEL_TLV_CLOSE: bnx2x_vf_mbx_close_vf(bp, vf, mbx); - break; + return; case CHANNEL_TLV_RELEASE: bnx2x_vf_mbx_release_vf(bp, vf, mbx); - break; + return; case CHANNEL_TLV_UPDATE_RSS: bnx2x_vf_mbx_update_rss(bp, vf, mbx); - break; + return; } } else { @@ -1802,26 +1802,24 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, for (i = 0; i < 20; i++) DP_CONT(BNX2X_MSG_IOV, "%x ", mbx->msg->req.tlv_buf_size.tlv_buffer[i]); + } - /* test whether we can respond to the VF (do we have an address - * for it?) + /* can we respond to VF (do we have an address for it?) */ + if (vf->state == VF_ACQUIRED || vf->state == VF_ENABLED) { + /* mbx_resp uses the op_rc of the VF */ + vf->op_rc = PFVF_STATUS_NOT_SUPPORTED; + + /* notify the VF that we do not support this request */ + bnx2x_vf_mbx_resp(bp, vf); + } else { + /* can't send a response since this VF is unknown to us + * just ack the FW to release the mailbox and unlock + * the channel. */ - if (vf->state == VF_ACQUIRED || vf->state == VF_ENABLED) { - /* mbx_resp uses the op_rc of the VF */ - vf->op_rc = PFVF_STATUS_NOT_SUPPORTED; - - /* notify the VF that we do not support this request */ - bnx2x_vf_mbx_resp(bp, vf); - } else { - /* can't send a response since this VF is unknown to us - * just ack the FW to release the mailbox and unlock - * the channel. - */ - storm_memset_vf_mbx_ack(bp, vf->abs_vfid); - mmiowb(); - bnx2x_unlock_vf_pf_channel(bp, vf, - mbx->first_tlv.tl.type); - } + storm_memset_vf_mbx_ack(bp, vf->abs_vfid); + /* Firmware ack should be written before unlocking channel */ + mmiowb(); + bnx2x_unlock_vf_pf_channel(bp, vf, mbx->first_tlv.tl.type); } } From 5bcecf325378218a8e248bb6bcae96ec7362f8ef Mon Sep 17 00:00:00 2001 From: Ken O'Brien Date: Sat, 21 Sep 2013 19:14:43 +0100 Subject: [PATCH 086/459] Bluetooth: btusb: Add support for Belkin F8065bf Add generic rule on encountering Belkin bluetooth usb device F8065bf. Relevant section from /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=050d ProdID=065a Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=0002723E2D29 C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms Signed-off-by: Ken O'Brien Signed-off-by: Gustavo Padovan --- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 3221a55dddad..f3dfc0a88fdc 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -113,6 +113,9 @@ static struct usb_device_id btusb_table[] = { /*Broadcom devices with vendor specific id */ { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) }, + /* Belkin F8065bf - Broadcom based */ + { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01) }, + { } /* Terminating entry */ }; From a224bd36bf5ccc72d0f12ab11216706762133177 Mon Sep 17 00:00:00 2001 From: "josselin.costanzi@mobile-devices.fr" Date: Wed, 18 Sep 2013 12:00:35 +0200 Subject: [PATCH 087/459] net/lapb: re-send packets on timeout Actually re-send packets when the T1 timer runs out. This fixes a bug where packets are waiting on the write queue until disconnection when no other traffic is outstanding. Signed-off-by: Josselin Costanzi Signed-off-by: Maxime Jayat Signed-off-by: David S. Miller --- net/lapb/lapb_timer.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/lapb/lapb_timer.c b/net/lapb/lapb_timer.c index 54563ad8aeb1..355cc3b6fa4d 100644 --- a/net/lapb/lapb_timer.c +++ b/net/lapb/lapb_timer.c @@ -154,6 +154,7 @@ static void lapb_t1timer_expiry(unsigned long param) } else { lapb->n2count++; lapb_requeue_frames(lapb); + lapb_kick(lapb); } break; From 9fe34f5d920b183ec063550e0f4ec854aa373316 Mon Sep 17 00:00:00 2001 From: Noel Burton-Krahn Date: Wed, 18 Sep 2013 12:24:40 -0700 Subject: [PATCH 088/459] mrp: add periodictimer to allow retries when packets get lost MRP doesn't implement the periodictimer in 802.1Q, so it never retries if packets get lost. I ran into this problem when MRP sent a MVRP JoinIn before the interface was fully up. The JoinIn was lost, MRP didn't retry, and MVRP registration failed. Tested against Juniper QFabric switches Signed-off-by: Noel Burton-Krahn Acked-by: David Ward Signed-off-by: David S. Miller --- include/net/mrp.h | 1 + net/802/mrp.c | 27 +++++++++++++++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/include/net/mrp.h b/include/net/mrp.h index 4fbf02aa2ec1..0f7558b638ae 100644 --- a/include/net/mrp.h +++ b/include/net/mrp.h @@ -112,6 +112,7 @@ struct mrp_applicant { struct mrp_application *app; struct net_device *dev; struct timer_list join_timer; + struct timer_list periodic_timer; spinlock_t lock; struct sk_buff_head queue; diff --git a/net/802/mrp.c b/net/802/mrp.c index 1eb05d80b07b..3ed616215870 100644 --- a/net/802/mrp.c +++ b/net/802/mrp.c @@ -24,6 +24,11 @@ static unsigned int mrp_join_time __read_mostly = 200; module_param(mrp_join_time, uint, 0644); MODULE_PARM_DESC(mrp_join_time, "Join time in ms (default 200ms)"); + +static unsigned int mrp_periodic_time __read_mostly = 1000; +module_param(mrp_periodic_time, uint, 0644); +MODULE_PARM_DESC(mrp_periodic_time, "Periodic time in ms (default 1s)"); + MODULE_LICENSE("GPL"); static const u8 @@ -595,6 +600,24 @@ static void mrp_join_timer(unsigned long data) mrp_join_timer_arm(app); } +static void mrp_periodic_timer_arm(struct mrp_applicant *app) +{ + mod_timer(&app->periodic_timer, + jiffies + msecs_to_jiffies(mrp_periodic_time)); +} + +static void mrp_periodic_timer(unsigned long data) +{ + struct mrp_applicant *app = (struct mrp_applicant *)data; + + spin_lock(&app->lock); + mrp_mad_event(app, MRP_EVENT_PERIODIC); + mrp_pdu_queue(app); + spin_unlock(&app->lock); + + mrp_periodic_timer_arm(app); +} + static int mrp_pdu_parse_end_mark(struct sk_buff *skb, int *offset) { __be16 endmark; @@ -845,6 +868,9 @@ int mrp_init_applicant(struct net_device *dev, struct mrp_application *appl) rcu_assign_pointer(dev->mrp_port->applicants[appl->type], app); setup_timer(&app->join_timer, mrp_join_timer, (unsigned long)app); mrp_join_timer_arm(app); + setup_timer(&app->periodic_timer, mrp_periodic_timer, + (unsigned long)app); + mrp_periodic_timer_arm(app); return 0; err3: @@ -870,6 +896,7 @@ void mrp_uninit_applicant(struct net_device *dev, struct mrp_application *appl) * all pending messages before the applicant is gone. */ del_timer_sync(&app->join_timer); + del_timer_sync(&app->periodic_timer); spin_lock_bh(&app->lock); mrp_mad_event(app, MRP_EVENT_TX); From 284d20552461466b04d6bfeafeb1c47a8891b591 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 5 Sep 2013 11:01:20 +0300 Subject: [PATCH 089/459] xhci: Fix oops happening after address device timeout When a command times out, the command ring is first aborted, and then stopped. If the command ring is empty when it is stopped the stop event will point to next command which is not yet set. xHCI tries to handle this next event often causing an oops. Don't handle command completion events on stopped cmd ring if ring is empty. This patch should be backported to kernels as old as 3.7, that contain the commit b92cc66c047ff7cf587b318fe377061a353c120f "xHCI: add aborting command ring function" Signed-off-by: Mathias Nyman Reported-by: Giovanni Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-ring.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 411da1fc7ae8..aaa2906f7b78 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1414,6 +1414,12 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, inc_deq(xhci, xhci->cmd_ring); return; } + /* There is no command to handle if we get a stop event when the + * command ring is empty, event->cmd_trb points to the next + * unset command + */ + if (xhci->cmd_ring->dequeue == xhci->cmd_ring->enqueue) + return; } switch (le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3]) From ec7e43e2d98173483866fe2e4e690143626b659c Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 30 Aug 2013 18:25:49 +0300 Subject: [PATCH 090/459] xhci: Ensure a command structure points to the correct trb on the command ring If a command on the command ring needs to be cancelled before it is handled it can be turned to a no-op operation when the ring is stopped. We want to store the command ring enqueue pointer in the command structure when the command in enqueued for the cancellation case. Some commands used to store the command ring dequeue pointers instead of enqueue (these often worked because enqueue happends to equal dequeue quite often) Other commands correctly used the enqueue pointer but did not check if it pointed to a valid trb or a link trb, this caused for example stop endpoint command to timeout in xhci_stop_device() in about 2% of suspend/resume cases. This should also solve some weird behavior happening in command cancellation cases. This patch is based on a patch submitted by Sarah Sharp to linux-usb, but then forgotten: http://marc.info/?l=linux-usb&m=136269803207465&w=2 This patch should be backported to kernels as old as 3.7, that contain the commit b92cc66c047ff7cf587b318fe377061a353c120f "xHCI: add aborting command ring function" Signed-off-by: Mathias Nyman Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-hub.c | 2 +- drivers/usb/host/xhci-ring.c | 10 ++++++++++ drivers/usb/host/xhci.c | 25 +++++-------------------- drivers/usb/host/xhci.h | 1 + 4 files changed, 17 insertions(+), 21 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index fae697ed0b70..ccf0a06199a3 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -287,7 +287,7 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) xhci_queue_stop_endpoint(xhci, slot_id, i, suspend); } - cmd->command_trb = xhci->cmd_ring->enqueue; + cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring); list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list); xhci_queue_stop_endpoint(xhci, slot_id, 0, suspend); xhci_ring_cmd_db(xhci); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index aaa2906f7b78..9ac9672d4498 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -123,6 +123,16 @@ static int enqueue_is_link_trb(struct xhci_ring *ring) return TRB_TYPE_LINK_LE32(link->control); } +union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring) +{ + /* Enqueue pointer can be left pointing to the link TRB, + * we must handle that + */ + if (TRB_TYPE_LINK_LE32(ring->enqueue->link.control)) + return ring->enq_seg->next->trbs; + return ring->enqueue; +} + /* Updates trb to point to the next TRB in the ring, and updates seg if the next * TRB is in a new segment. This does not skip over link TRBs, and it does not * effect the ring dequeue or enqueue pointers. diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 49b6edb84a79..1e36dbb48366 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2598,15 +2598,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, if (command) { cmd_completion = command->completion; cmd_status = &command->status; - command->command_trb = xhci->cmd_ring->enqueue; - - /* Enqueue pointer can be left pointing to the link TRB, - * we must handle that - */ - if (TRB_TYPE_LINK_LE32(command->command_trb->link.control)) - command->command_trb = - xhci->cmd_ring->enq_seg->next->trbs; - + command->command_trb = xhci_find_next_enqueue(xhci->cmd_ring); list_add_tail(&command->cmd_list, &virt_dev->cmd_list); } else { cmd_completion = &virt_dev->cmd_completion; @@ -2614,7 +2606,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, } init_completion(cmd_completion); - cmd_trb = xhci->cmd_ring->dequeue; + cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring); if (!ctx_change) ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma, udev->slot_id, must_succeed); @@ -3439,14 +3431,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) /* Attempt to submit the Reset Device command to the command ring */ spin_lock_irqsave(&xhci->lock, flags); - reset_device_cmd->command_trb = xhci->cmd_ring->enqueue; - - /* Enqueue pointer can be left pointing to the link TRB, - * we must handle that - */ - if (TRB_TYPE_LINK_LE32(reset_device_cmd->command_trb->link.control)) - reset_device_cmd->command_trb = - xhci->cmd_ring->enq_seg->next->trbs; + reset_device_cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring); list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list); ret = xhci_queue_reset_device(xhci, slot_id); @@ -3650,7 +3635,7 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) union xhci_trb *cmd_trb; spin_lock_irqsave(&xhci->lock, flags); - cmd_trb = xhci->cmd_ring->dequeue; + cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring); ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0); if (ret) { spin_unlock_irqrestore(&xhci->lock, flags); @@ -3785,7 +3770,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) slot_ctx->dev_info >> 27); spin_lock_irqsave(&xhci->lock, flags); - cmd_trb = xhci->cmd_ring->dequeue; + cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring); ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma, udev->slot_id); if (ret) { diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 46aa14894148..f3e10206cd95 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1840,6 +1840,7 @@ int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command, union xhci_trb *cmd_trb); void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id); +union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring); /* xHCI roothub code */ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, From 8b3d45705e54075cfb9d4212dbca9ea82c85c4b8 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 20 Aug 2013 08:12:12 -0700 Subject: [PATCH 091/459] usb: Fix xHCI host issues on remote wakeup. When a device signals remote wakeup on a roothub, and the suspend change bit is set, the host controller driver must not give control back to the USB core until the port goes back into the active state. EHCI accomplishes this by waiting in the get port status function until the PORT_RESUME bit is cleared: /* stop resume signaling */ temp &= ~(PORT_RWC_BITS | PORT_SUSPEND | PORT_RESUME); ehci_writel(ehci, temp, status_reg); clear_bit(wIndex, &ehci->resuming_ports); retval = ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 2000 /* 2msec */); Similarly, the xHCI host should wait until the port goes into U0, before passing control up to the USB core. When the port transitions from the RExit state to U0, the xHCI driver will get a port status change event. We need to wait for that event before passing control up to the USB core. After the port transitions to the active state, the USB core should time a recovery interval before it talks to the device. The length of that recovery interval is TRSMRCY, 10 ms, mentioned in the USB 2.0 spec, section 7.1.7.7. The previous xHCI code (which did not wait for the port to go into U0) would cause the USB core to violate that recovery interval. This bug caused numerous USB device disconnects on remote wakeup under ChromeOS and a Lynx Point LP xHCI host that takes up to 20 ms to move from RExit to U0. ChromeOS is very aggressive about power savings, and sets the autosuspend_delay to 100 ms, and disables USB persist. I attempted to replicate this bug with Ubuntu 12.04, but could not. I used Ubuntu 12.04 on the same platform, with the same BIOS that the bug was triggered on ChromeOS with. I also changed the USB sysfs settings as described above, but still could not reproduce the bug under Ubuntu. It may be that ChromeOS userspace triggers this bug through additional settings. Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-hub.c | 45 ++++++++++++++++++++++++++++-------- drivers/usb/host/xhci-mem.c | 2 ++ drivers/usb/host/xhci-ring.c | 13 +++++++++++ drivers/usb/host/xhci.h | 10 ++++++++ 4 files changed, 60 insertions(+), 10 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index ccf0a06199a3..773a6b28c4f1 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -552,11 +552,15 @@ void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex) * - Mark a port as being done with device resume, * and ring the endpoint doorbells. * - Stop the Synopsys redriver Compliance Mode polling. + * - Drop and reacquire the xHCI lock, in order to wait for port resume. */ static u32 xhci_get_port_status(struct usb_hcd *hcd, struct xhci_bus_state *bus_state, __le32 __iomem **port_array, - u16 wIndex, u32 raw_port_status) + u16 wIndex, u32 raw_port_status, + unsigned long flags) + __releases(&xhci->lock) + __acquires(&xhci->lock) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); u32 status = 0; @@ -591,21 +595,42 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, return 0xffffffff; if (time_after_eq(jiffies, bus_state->resume_done[wIndex])) { + int time_left; + xhci_dbg(xhci, "Resume USB2 port %d\n", wIndex + 1); bus_state->resume_done[wIndex] = 0; clear_bit(wIndex, &bus_state->resuming_ports); + + set_bit(wIndex, &bus_state->rexit_ports); xhci_set_link_state(xhci, port_array, wIndex, XDEV_U0); - xhci_dbg(xhci, "set port %d resume\n", - wIndex + 1); - slot_id = xhci_find_slot_id_by_port(hcd, xhci, - wIndex + 1); - if (!slot_id) { - xhci_dbg(xhci, "slot_id is zero\n"); - return 0xffffffff; + + spin_unlock_irqrestore(&xhci->lock, flags); + time_left = wait_for_completion_timeout( + &bus_state->rexit_done[wIndex], + msecs_to_jiffies( + XHCI_MAX_REXIT_TIMEOUT)); + spin_lock_irqsave(&xhci->lock, flags); + + if (time_left) { + slot_id = xhci_find_slot_id_by_port(hcd, + xhci, wIndex + 1); + if (!slot_id) { + xhci_dbg(xhci, "slot_id is zero\n"); + return 0xffffffff; + } + xhci_ring_device(xhci, slot_id); + } else { + int port_status = xhci_readl(xhci, + port_array[wIndex]); + xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n", + XHCI_MAX_REXIT_TIMEOUT, + port_status); + status |= USB_PORT_STAT_SUSPEND; + clear_bit(wIndex, &bus_state->rexit_ports); } - xhci_ring_device(xhci, slot_id); + bus_state->port_c_suspend |= 1 << wIndex; bus_state->suspended_ports &= ~(1 << wIndex); } else { @@ -728,7 +753,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; } status = xhci_get_port_status(hcd, bus_state, port_array, - wIndex, temp); + wIndex, temp, flags); if (status == 0xffffffff) goto error; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 53b972c2a09f..83bcd13622c3 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -2428,6 +2428,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) for (i = 0; i < USB_MAXCHILDREN; ++i) { xhci->bus_state[0].resume_done[i] = 0; xhci->bus_state[1].resume_done[i] = 0; + /* Only the USB 2.0 completions will ever be used. */ + init_completion(&xhci->bus_state[1].rexit_done[i]); } if (scratchpad_alloc(xhci, flags)) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 9ac9672d4498..dd02402700d5 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1759,6 +1759,19 @@ static void handle_port_status(struct xhci_hcd *xhci, } } + /* + * Check to see if xhci-hub.c is waiting on RExit to U0 transition (or + * RExit to a disconnect state). If so, let the the driver know it's + * out of the RExit state. + */ + if (!DEV_SUPERSPEED(temp) && + test_and_clear_bit(faked_port_index, + &bus_state->rexit_ports)) { + complete(&bus_state->rexit_done[faked_port_index]); + bogus_port_status = true; + goto cleanup; + } + if (hcd->speed != HCD_USB3) xhci_test_and_clear_bit(xhci, port_array, faked_port_index, PORT_PLC); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index f3e10206cd95..289fbfbae746 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1412,8 +1412,18 @@ struct xhci_bus_state { unsigned long resume_done[USB_MAXCHILDREN]; /* which ports have started to resume */ unsigned long resuming_ports; + /* Which ports are waiting on RExit to U0 transition. */ + unsigned long rexit_ports; + struct completion rexit_done[USB_MAXCHILDREN]; }; + +/* + * It can take up to 20 ms to transition from RExit to U0 on the + * Intel Lynx Point LP xHCI host. + */ +#define XHCI_MAX_REXIT_TIMEOUT (20 * 1000) + static inline unsigned int hcd_index(struct usb_hcd *hcd) { if (hcd->speed == HCD_USB3) From 526867c3ca0caa2e3e846cb993b0f961c33c2abb Mon Sep 17 00:00:00 2001 From: Florian Wolter Date: Wed, 14 Aug 2013 10:33:16 +0200 Subject: [PATCH 092/459] xhci: Fix race between ep halt and URB cancellation The halted state of a endpoint cannot be cleared over CLEAR_HALT from a user process, because the stopped_td variable was overwritten in the handle_stopped_endpoint() function. So the xhci_endpoint_reset() function will refuse the reset and communication with device can not run over this endpoint. https://bugzilla.kernel.org/show_bug.cgi?id=60699 Signed-off-by: Florian Wolter Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index dd02402700d5..6bfbd80ec2b9 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -869,8 +869,12 @@ remove_finished_td: /* Otherwise ring the doorbell(s) to restart queued transfers */ ring_doorbell_for_active_rings(xhci, slot_id, ep_index); } - ep->stopped_td = NULL; - ep->stopped_trb = NULL; + + /* Clear stopped_td and stopped_trb if endpoint is not halted */ + if (!(ep->ep_state & EP_HALTED)) { + ep->stopped_td = NULL; + ep->stopped_trb = NULL; + } /* * Drop the lock and complete the URBs in the cancelled TD list. From 38d7f6885164b114fdfae84bc18397e8fced9b00 Mon Sep 17 00:00:00 2001 From: Xenia Ragiadakou Date: Wed, 4 Sep 2013 17:24:45 +0300 Subject: [PATCH 093/459] usbcore: check usb device's state before sending a Set SEL control transfer Set SEL control urbs cannot be sent to a device in unconfigured state. This patch adds a check in usb_req_set_sel() to ensure the usb device's state is USB_STATE_CONFIGURED. Signed-off-by: Xenia Ragiadakou Reported-by: Martin MOKREJS Suggested-by: Sarah Sharp Signed-off-by: Sarah Sharp --- drivers/usb/core/hub.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index dde4c83516a1..e6b682c6c236 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3426,6 +3426,9 @@ static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state) unsigned long long u2_pel; int ret; + if (udev->state != USB_STATE_CONFIGURED) + return 0; + /* Convert SEL and PEL stored in ns to us */ u1_sel = DIV_ROUND_UP(udev->u1_params.sel, 1000); u1_pel = DIV_ROUND_UP(udev->u1_params.pel, 1000); From 0b6e8569b7b767f9418f1b043aa5986015a33b21 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 13 Sep 2013 13:10:27 -0600 Subject: [PATCH 094/459] MAINTAINERS: add overall IOMMU section I believe that Joerg Roedel is at least the path through which drivers/iommu changes should be merged. Add a MAINTAINERS entry to make this clear, so that he's Cd'd on all relevant patches. This is relevant for non-AMD/Intel IOMMUs, where get_maintainers.pl doesn't currently remind anyone to Cc Joerg on patches. Signed-off-by: Stephen Warren Signed-off-by: Joerg Roedel --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index e61c2e83fc2b..25d2d56b4e6a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4457,6 +4457,13 @@ L: linux-serial@vger.kernel.org S: Maintained F: drivers/tty/serial/ioc3_serial.c +IOMMU DRIVERS +M: Joerg Roedel +L: iommu@lists.linux-foundation.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git +S: Maintained +F: drivers/iommu/ + IP MASQUERADING M: Juanjo Ciarlante S: Maintained From 82aeef0bf03684b377678c00c05e613f30dca39c Mon Sep 17 00:00:00 2001 From: "Li, Zhen-Hua" Date: Fri, 13 Sep 2013 14:27:32 +0800 Subject: [PATCH 095/459] x86/iommu: correct ICS register offset According to Intel Vt-D specs, the offset of Invalidation complete status register should be 0x9C, not 0x98. See Intel's VT-d spec, Revision 1.3, Chapter 10.4, Page 98; Signed-off-by: Li, Zhen-Hua Signed-off-by: Joerg Roedel --- include/linux/intel-iommu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index 78e2ada50cd5..d380c5e68008 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -55,7 +55,7 @@ #define DMAR_IQT_REG 0x88 /* Invalidation queue tail register */ #define DMAR_IQ_SHIFT 4 /* Invalidation queue head/tail shift */ #define DMAR_IQA_REG 0x90 /* Invalidation queue addr register */ -#define DMAR_ICS_REG 0x98 /* Invalidation complete status register */ +#define DMAR_ICS_REG 0x9c /* Invalidation complete status register */ #define DMAR_IRTA_REG 0xb8 /* Interrupt remapping table addr register */ #define OFFSET_STRIDE (9) From 1a462d189280b560bd84af1407e4d848e262b3b3 Mon Sep 17 00:00:00 2001 From: Duan Jiong Date: Fri, 20 Sep 2013 18:20:28 +0800 Subject: [PATCH 096/459] net: udp: do not report ICMP redirects to user space Redirect isn't an error condition, it should leave the error handler without touching the socket. Signed-off-by: Duan Jiong Signed-off-by: David S. Miller --- net/ipv4/udp.c | 2 +- net/ipv6/udp.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 74d2c95db57f..0ca44df51ee9 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -658,7 +658,7 @@ void __udp4_lib_err(struct sk_buff *skb, u32 info, struct udp_table *udptable) break; case ICMP_REDIRECT: ipv4_sk_redirect(skb, sk); - break; + goto out; } /* diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index f4058150262b..72b7eaaf3ca0 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -525,8 +525,10 @@ void __udp6_lib_err(struct sk_buff *skb, struct inet6_skb_parm *opt, if (type == ICMPV6_PKT_TOOBIG) ip6_sk_update_pmtu(skb, sk, info); - if (type == NDISC_REDIRECT) + if (type == NDISC_REDIRECT) { ip6_sk_redirect(skb, sk); + goto out; + } np = inet6_sk(sk); From 8d65b1190ddc548b0411477f308d04f4595bac57 Mon Sep 17 00:00:00 2001 From: Duan Jiong Date: Fri, 20 Sep 2013 18:21:25 +0800 Subject: [PATCH 097/459] net: raw: do not report ICMP redirects to user space Redirect isn't an error condition, it should leave the error handler without touching the socket. Signed-off-by: Duan Jiong Signed-off-by: David S. Miller --- net/ipv4/raw.c | 4 +++- net/ipv6/raw.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index bfec521c717f..193db03540ad 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -218,8 +218,10 @@ static void raw_err(struct sock *sk, struct sk_buff *skb, u32 info) if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED) ipv4_sk_update_pmtu(skb, sk, info); - else if (type == ICMP_REDIRECT) + else if (type == ICMP_REDIRECT) { ipv4_sk_redirect(skb, sk); + return; + } /* Report error on raw socket, if: 1. User requested ip_recverr. diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index 58916bbb1728..a4ed2416399e 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -335,8 +335,10 @@ static void rawv6_err(struct sock *sk, struct sk_buff *skb, ip6_sk_update_pmtu(skb, sk, info); harderr = (np->pmtudisc == IPV6_PMTUDISC_DO); } - if (type == NDISC_REDIRECT) + if (type == NDISC_REDIRECT) { ip6_sk_redirect(skb, sk); + return; + } if (np->recverr) { u8 *payload = skb->data; if (!inet->hdrincl) From 3361dc9538832a2a9150a8c722374ca844bf8dc8 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 20 Sep 2013 13:53:22 -0400 Subject: [PATCH 098/459] skge: fix invalid value passed to pci_unmap_sigle In my patch c194992cbe71c20bb3623a566af8d11b0bfaa721 ("skge: fix broken driver") I didn't fix the skge bug correctly. The value of the new mapping (not old) was passed to pci_unmap_single. If we enable CONFIG_DMA_API_DEBUG, it results in this warning: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:986 check_sync+0x4c4/0x580() skge 0000:02:07.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000023a0096c0] [size=1536 bytes] This patch makes the skge driver pass the correct value to pci_unmap_single and fixes the warning. It copies the old descriptor to on-stack variable "ee" and unmaps it if mapping of the new descriptor succeeded. This patch should be backported to 3.11-stable. Signed-off-by: Mikulas Patocka Reported-by: Francois Romieu Tested-by: Mikulas Patocka Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/skge.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index 1a9c4f6269ea..ecc7f7b696b8 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -3086,13 +3086,16 @@ static struct sk_buff *skge_rx_get(struct net_device *dev, PCI_DMA_FROMDEVICE); skge_rx_reuse(e, skge->rx_buf_size); } else { + struct skge_element ee; struct sk_buff *nskb; nskb = netdev_alloc_skb_ip_align(dev, skge->rx_buf_size); if (!nskb) goto resubmit; - skb = e->skb; + ee = *e; + + skb = ee.skb; prefetch(skb->data); if (skge_rx_setup(skge, e, nskb, skge->rx_buf_size) < 0) { @@ -3101,8 +3104,8 @@ static struct sk_buff *skge_rx_get(struct net_device *dev, } pci_unmap_single(skge->hw->pdev, - dma_unmap_addr(e, mapaddr), - dma_unmap_len(e, maplen), + dma_unmap_addr(&ee, mapaddr), + dma_unmap_len(&ee, maplen), PCI_DMA_FROMDEVICE); } From 3db9180213af6aa54effc2b94bc9090dc1f68673 Mon Sep 17 00:00:00 2001 From: "malahal@us.ibm.com" Date: Fri, 20 Sep 2013 16:21:17 -0500 Subject: [PATCH 099/459] qlge: call ql_core_dump() only if dump memory was allocated. Also changed a log message to indicate that memory was not allocated instead of memory not available! Signed-off-by: Malahal Naineni Acked-by: Jitendra Kalsaria Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlge/qlge_dbg.c | 4 ++-- drivers/net/ethernet/qlogic/qlge/qlge_mpi.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c b/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c index 10093f0c4c0f..6bc5db703920 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c @@ -740,8 +740,8 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump) int i; if (!mpi_coredump) { - netif_err(qdev, drv, qdev->ndev, "No memory available\n"); - return -ENOMEM; + netif_err(qdev, drv, qdev->ndev, "No memory allocated\n"); + return -EINVAL; } /* Try to get the spinlock, but dont worry if diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c b/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c index ff2bf8a4e247..7ad146080c36 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c @@ -1274,7 +1274,7 @@ void ql_mpi_reset_work(struct work_struct *work) return; } - if (!ql_core_dump(qdev, qdev->mpi_coredump)) { + if (qdev->mpi_coredump && !ql_core_dump(qdev, qdev->mpi_coredump)) { netif_err(qdev, drv, qdev->ndev, "Core is dumped!\n"); qdev->core_is_dumped = 1; queue_delayed_work(qdev->workqueue, From 2811ebac2521ceac84f2bdae402455baa6a7fb47 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sat, 21 Sep 2013 06:27:00 +0200 Subject: [PATCH 100/459] ipv6: udp packets following an UFO enqueued packet need also be handled by UFO In the following scenario the socket is corked: If the first UDP packet is larger then the mtu we try to append it to the write queue via ip6_ufo_append_data. A following packet, which is smaller than the mtu would be appended to the already queued up gso-skb via plain ip6_append_data. This causes random memory corruptions. In ip6_ufo_append_data we also have to be careful to not queue up the same skb multiple times. So setup the gso frame only when no first skb is available. This also fixes a shortcoming where we add the current packet's length to cork->length but return early because of a packet > mtu with dontfrag set (instead of sutracting it again). Found with trinity. Cc: YOSHIFUJI Hideaki Signed-off-by: Hannes Frederic Sowa Reported-by: Dmitry Vyukov Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 55 ++++++++++++++++++------------------------- 1 file changed, 23 insertions(+), 32 deletions(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 3a692d529163..a54c45ce4a48 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1015,6 +1015,8 @@ static inline int ip6_ufo_append_data(struct sock *sk, * udp datagram */ if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL) { + struct frag_hdr fhdr; + skb = sock_alloc_send_skb(sk, hh_len + fragheaderlen + transhdrlen + 20, (flags & MSG_DONTWAIT), &err); @@ -1036,12 +1038,6 @@ static inline int ip6_ufo_append_data(struct sock *sk, skb->protocol = htons(ETH_P_IPV6); skb->ip_summed = CHECKSUM_PARTIAL; skb->csum = 0; - } - - err = skb_append_datato_frags(sk,skb, getfrag, from, - (length - transhdrlen)); - if (!err) { - struct frag_hdr fhdr; /* Specify the length of each IPv6 datagram fragment. * It has to be a multiple of 8. @@ -1052,15 +1048,10 @@ static inline int ip6_ufo_append_data(struct sock *sk, ipv6_select_ident(&fhdr, rt); skb_shinfo(skb)->ip6_frag_id = fhdr.identification; __skb_queue_tail(&sk->sk_write_queue, skb); - - return 0; } - /* There is not enough support do UPD LSO, - * so follow normal path - */ - kfree_skb(skb); - return err; + return skb_append_datato_frags(sk, skb, getfrag, from, + (length - transhdrlen)); } static inline struct ipv6_opt_hdr *ip6_opt_dup(struct ipv6_opt_hdr *src, @@ -1227,27 +1218,27 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to, * --yoshfuji */ - cork->length += length; - if (length > mtu) { - int proto = sk->sk_protocol; - if (dontfrag && (proto == IPPROTO_UDP || proto == IPPROTO_RAW)){ - ipv6_local_rxpmtu(sk, fl6, mtu-exthdrlen); - return -EMSGSIZE; - } - - if (proto == IPPROTO_UDP && - (rt->dst.dev->features & NETIF_F_UFO)) { - - err = ip6_ufo_append_data(sk, getfrag, from, length, - hh_len, fragheaderlen, - transhdrlen, mtu, flags, rt); - if (err) - goto error; - return 0; - } + if ((length > mtu) && dontfrag && (sk->sk_protocol == IPPROTO_UDP || + sk->sk_protocol == IPPROTO_RAW)) { + ipv6_local_rxpmtu(sk, fl6, mtu-exthdrlen); + return -EMSGSIZE; } - if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL) + skb = skb_peek_tail(&sk->sk_write_queue); + cork->length += length; + if (((length > mtu) || + (skb && skb_is_gso(skb))) && + (sk->sk_protocol == IPPROTO_UDP) && + (rt->dst.dev->features & NETIF_F_UFO)) { + err = ip6_ufo_append_data(sk, getfrag, from, length, + hh_len, fragheaderlen, + transhdrlen, mtu, flags, rt); + if (err) + goto error; + return 0; + } + + if (!skb) goto alloc_new_skb; while (length > 0) { From ac570e0493815e0b41681c89cb50d66421429d27 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 11 Sep 2013 15:27:41 -0700 Subject: [PATCH 101/459] ARM: kvm: rename cpu_reset to avoid name clash cpu_reset is already #defined in as processor.reset, so it expands here and causes problems. Cc: Signed-off-by: Olof Johansson Signed-off-by: Christoffer Dall --- arch/arm/kvm/reset.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c index 71e08baee209..c02ba4af599f 100644 --- a/arch/arm/kvm/reset.c +++ b/arch/arm/kvm/reset.c @@ -58,14 +58,14 @@ static const struct kvm_irq_level a15_vtimer_irq = { */ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) { - struct kvm_regs *cpu_reset; + struct kvm_regs *reset_regs; const struct kvm_irq_level *cpu_vtimer_irq; switch (vcpu->arch.target) { case KVM_ARM_TARGET_CORTEX_A15: if (vcpu->vcpu_id > a15_max_cpu_idx) return -EINVAL; - cpu_reset = &a15_regs_reset; + reset_regs = &a15_regs_reset; vcpu->arch.midr = read_cpuid_id(); cpu_vtimer_irq = &a15_vtimer_irq; break; @@ -74,7 +74,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) } /* Reset core registers */ - memcpy(&vcpu->arch.regs, cpu_reset, sizeof(vcpu->arch.regs)); + memcpy(&vcpu->arch.regs, reset_regs, sizeof(vcpu->arch.regs)); /* Reset CP15 registers */ kvm_reset_coprocs(vcpu); From bcd1c2949501869631b25fd62d8df5079677a101 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Wed, 25 Sep 2013 10:58:22 +0300 Subject: [PATCH 102/459] KVM: VMX: do not check bit 12 of EPT violation exit qualification when undefined Bit 12 is undefined in any of the following cases: - If the "NMI exiting" VM-execution control is 1 and the "virtual NMIs" VM-execution control is 0. - If the VM exit sets the valid bit in the IDT-vectoring information field Signed-off-by: Gleb Natapov [Add parentheses around & within && - Paolo] Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index a1216de9ffda..3b8e7459dd4d 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -5345,7 +5345,9 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu) * There are errata that may cause this bit to not be set: * AAK134, BY25. */ - if (exit_qualification & INTR_INFO_UNBLOCK_NMI) + if (!(to_vmx(vcpu)->idt_vectoring_info & VECTORING_INFO_VALID_MASK) && + cpu_has_virtual_nmis() && + (exit_qualification & INTR_INFO_UNBLOCK_NMI)) vmcs_set_bits(GUEST_INTERRUPTIBILITY_INFO, GUEST_INTR_STATE_NMI); gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS); From 1f65c13efef69b6dc908e588f91a133641d8475c Mon Sep 17 00:00:00 2001 From: AKASHI Takahiro Date: Tue, 24 Sep 2013 10:00:50 +0100 Subject: [PATCH 103/459] arm64: avoid multiple evaluation of ptr in get_user/put_user() get_user() is defined as a function macro in arm64, and trace_get_user() calls it as followed: get_user(ch, ptr++); Since the second parameter occurs twice in the definition, 'ptr++' is unexpectedly evaluated twice and trace_get_user() will generate a bogus string from user-provided one. As a result, some ftrace sysfs operations, like "echo FUNCNAME > set_ftrace_filter," hit this case and eventually fail. This patch fixes the issue both in get_user() and put_user(). Signed-off-by: AKASHI Takahiro [catalin.marinas@arm.com: added __user type annotation and s/optr/__p/] Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/uaccess.h | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h index edb3d5c73a32..7ecc2b23882e 100644 --- a/arch/arm64/include/asm/uaccess.h +++ b/arch/arm64/include/asm/uaccess.h @@ -166,9 +166,10 @@ do { \ #define get_user(x, ptr) \ ({ \ + __typeof__(*(ptr)) __user *__p = (ptr); \ might_fault(); \ - access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) ? \ - __get_user((x), (ptr)) : \ + access_ok(VERIFY_READ, __p, sizeof(*__p)) ? \ + __get_user((x), __p) : \ ((x) = 0, -EFAULT); \ }) @@ -227,9 +228,10 @@ do { \ #define put_user(x, ptr) \ ({ \ + __typeof__(*(ptr)) __user *__p = (ptr); \ might_fault(); \ - access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) ? \ - __put_user((x), (ptr)) : \ + access_ok(VERIFY_WRITE, __p, sizeof(*__p)) ? \ + __put_user((x), __p) : \ -EFAULT; \ }) From fc18047c732f6becba92618a397555927687efd3 Mon Sep 17 00:00:00 2001 From: Matthew Leach Date: Wed, 25 Sep 2013 16:33:13 +0100 Subject: [PATCH 104/459] arm64: use correct register width when retrieving ASID The ASID is represented as an unsigned int in mm_context_t and we currently use the mmid assembler macro to access this element of the struct. This should be accessed with a register of 32-bit width. If the incorrect register width is used the ASID will be returned in bits[32:63] of the register when running under big-endian. Fix a use of the mmid macro in tlb.S to use a 32-bit access. Signed-off-by: Will Deacon Signed-off-by: Matthew Leach Signed-off-by: Catalin Marinas --- arch/arm64/mm/tlb.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/mm/tlb.S b/arch/arm64/mm/tlb.S index 8ae80a18e8ec..19da91e0cd27 100644 --- a/arch/arm64/mm/tlb.S +++ b/arch/arm64/mm/tlb.S @@ -35,7 +35,7 @@ */ ENTRY(__cpu_flush_user_tlb_range) vma_vm_mm x3, x2 // get vma->vm_mm - mmid x3, x3 // get vm_mm->context.id + mmid w3, x3 // get vm_mm->context.id dsb sy lsr x0, x0, #12 // align address lsr x1, x1, #12 From 5fbbf8a1a93452b26e7791cf32cefce62b0a480b Mon Sep 17 00:00:00 2001 From: Lennox Wu Date: Sat, 14 Sep 2013 13:48:37 +0800 Subject: [PATCH 105/459] Score: The commit is for compiling successfully. The modifications include: 1. Kconfig of Score: we don't support ioremap 2. Missed headfile including 3. There are some errors in other people's commit not checked by us, we fix it now 3.1 arch/score/kernel/entry.S: wrong instructions 3.2 arch/score/kernel/process.c : just some typos Signed-off-by: Lennox Wu --- arch/score/Kconfig | 4 ++++ arch/score/include/asm/io.h | 1 - arch/score/include/asm/pgalloc.h | 2 +- arch/score/kernel/entry.S | 4 ++-- arch/score/kernel/process.c | 4 ++-- 5 files changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/score/Kconfig b/arch/score/Kconfig index a1be70db75fe..305f7ee1f382 100644 --- a/arch/score/Kconfig +++ b/arch/score/Kconfig @@ -2,6 +2,7 @@ menu "Machine selection" config SCORE def_bool y + select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW select GENERIC_IOMAP select GENERIC_ATOMIC64 @@ -110,3 +111,6 @@ source "security/Kconfig" source "crypto/Kconfig" source "lib/Kconfig" + +config NO_IOMEM + def_bool y diff --git a/arch/score/include/asm/io.h b/arch/score/include/asm/io.h index fbbfd7132e3b..574c8827abe2 100644 --- a/arch/score/include/asm/io.h +++ b/arch/score/include/asm/io.h @@ -5,5 +5,4 @@ #define virt_to_bus virt_to_phys #define bus_to_virt phys_to_virt - #endif /* _ASM_SCORE_IO_H */ diff --git a/arch/score/include/asm/pgalloc.h b/arch/score/include/asm/pgalloc.h index 059a61b7071b..716b3fd1d863 100644 --- a/arch/score/include/asm/pgalloc.h +++ b/arch/score/include/asm/pgalloc.h @@ -2,7 +2,7 @@ #define _ASM_SCORE_PGALLOC_H #include - +#include static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) { diff --git a/arch/score/kernel/entry.S b/arch/score/kernel/entry.S index 7234ed09b7b7..befb87d30a89 100644 --- a/arch/score/kernel/entry.S +++ b/arch/score/kernel/entry.S @@ -264,7 +264,7 @@ resume_kernel: disable_irq lw r8, [r28, TI_PRE_COUNT] cmpz.c r8 - bne r8, restore_all + bne restore_all need_resched: lw r8, [r28, TI_FLAGS] andri.c r9, r8, _TIF_NEED_RESCHED @@ -415,7 +415,7 @@ ENTRY(handle_sys) sw r9, [r0, PT_EPC] cmpi.c r27, __NR_syscalls # check syscall number - bgeu illegal_syscall + bcs illegal_syscall slli r8, r27, 2 # get syscall routine la r11, sys_call_table diff --git a/arch/score/kernel/process.c b/arch/score/kernel/process.c index f4c6d02421d3..a1519ad3d49d 100644 --- a/arch/score/kernel/process.c +++ b/arch/score/kernel/process.c @@ -78,8 +78,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, p->thread.reg0 = (unsigned long) childregs; if (unlikely(p->flags & PF_KTHREAD)) { memset(childregs, 0, sizeof(struct pt_regs)); - p->thread->reg12 = usp; - p->thread->reg13 = arg; + p->thread.reg12 = usp; + p->thread.reg13 = arg; p->thread.reg3 = (unsigned long) ret_from_kernel_thread; } else { *childregs = *current_pt_regs(); From 1ed62ca648557b884d117a4a8bbcf2ae4e2d1153 Mon Sep 17 00:00:00 2001 From: Lennox Wu Date: Sat, 14 Sep 2013 13:58:40 +0800 Subject: [PATCH 106/459] Score: Implement the function csum_ipv6_magic Signed-off-by: Lennox Wu --- arch/score/include/asm/checksum.h | 93 +++++++++++++++++-------------- 1 file changed, 51 insertions(+), 42 deletions(-) diff --git a/arch/score/include/asm/checksum.h b/arch/score/include/asm/checksum.h index f909ac3144a4..961bd64015a8 100644 --- a/arch/score/include/asm/checksum.h +++ b/arch/score/include/asm/checksum.h @@ -184,48 +184,57 @@ static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, __wsum sum) { __asm__ __volatile__( - ".set\tnoreorder\t\t\t# csum_ipv6_magic\n\t" - ".set\tnoat\n\t" - "addu\t%0, %5\t\t\t# proto (long in network byte order)\n\t" - "sltu\t$1, %0, %5\n\t" - "addu\t%0, $1\n\t" - "addu\t%0, %6\t\t\t# csum\n\t" - "sltu\t$1, %0, %6\n\t" - "lw\t%1, 0(%2)\t\t\t# four words source address\n\t" - "addu\t%0, $1\n\t" - "addu\t%0, %1\n\t" - "sltu\t$1, %0, %1\n\t" - "lw\t%1, 4(%2)\n\t" - "addu\t%0, $1\n\t" - "addu\t%0, %1\n\t" - "sltu\t$1, %0, %1\n\t" - "lw\t%1, 8(%2)\n\t" - "addu\t%0, $1\n\t" - "addu\t%0, %1\n\t" - "sltu\t$1, %0, %1\n\t" - "lw\t%1, 12(%2)\n\t" - "addu\t%0, $1\n\t" - "addu\t%0, %1\n\t" - "sltu\t$1, %0, %1\n\t" - "lw\t%1, 0(%3)\n\t" - "addu\t%0, $1\n\t" - "addu\t%0, %1\n\t" - "sltu\t$1, %0, %1\n\t" - "lw\t%1, 4(%3)\n\t" - "addu\t%0, $1\n\t" - "addu\t%0, %1\n\t" - "sltu\t$1, %0, %1\n\t" - "lw\t%1, 8(%3)\n\t" - "addu\t%0, $1\n\t" - "addu\t%0, %1\n\t" - "sltu\t$1, %0, %1\n\t" - "lw\t%1, 12(%3)\n\t" - "addu\t%0, $1\n\t" - "addu\t%0, %1\n\t" - "sltu\t$1, %0, %1\n\t" - "addu\t%0, $1\t\t\t# Add final carry\n\t" - ".set\tnoat\n\t" - ".set\tnoreorder" + ".set\tvolatile\t\t\t# csum_ipv6_magic\n\t" + "add\t%0, %0, %5\t\t\t# proto (long in network byte order)\n\t" + "cmp.c\t%5, %0\n\t" + "bleu 1f\n\t" + "addi\t%0, 0x1\n\t" + "1:add\t%0, %0, %6\t\t\t# csum\n\t" + "cmp.c\t%6, %0\n\t" + "lw\t%1, [%2, 0]\t\t\t# four words source address\n\t" + "bleu 1f\n\t" + "addi\t%0, 0x1\n\t" + "1:add\t%0, %0, %1\n\t" + "cmp.c\t%1, %0\n\t" + "1:lw\t%1, [%2, 4]\n\t" + "bleu 1f\n\t" + "addi\t%0, 0x1\n\t" + "1:add\t%0, %0, %1\n\t" + "cmp.c\t%1, %0\n\t" + "lw\t%1, [%2,8]\n\t" + "bleu 1f\n\t" + "addi\t%0, 0x1\n\t" + "1:add\t%0, %0, %1\n\t" + "cmp.c\t%1, %0\n\t" + "lw\t%1, [%2, 12]\n\t" + "bleu 1f\n\t" + "addi\t%0, 0x1\n\t" + "1:add\t%0, %0,%1\n\t" + "cmp.c\t%1, %0\n\t" + "lw\t%1, [%3, 0]\n\t" + "bleu 1f\n\t" + "addi\t%0, 0x1\n\t" + "1:add\t%0, %0, %1\n\t" + "cmp.c\t%1, %0\n\t" + "lw\t%1, [%3, 4]\n\t" + "bleu 1f\n\t" + "addi\t%0, 0x1\n\t" + "1:add\t%0, %0, %1\n\t" + "cmp.c\t%1, %0\n\t" + "lw\t%1, [%3, 8]\n\t" + "bleu 1f\n\t" + "addi\t%0, 0x1\n\t" + "1:add\t%0, %0, %1\n\t" + "cmp.c\t%1, %0\n\t" + "lw\t%1, [%3, 12]\n\t" + "bleu 1f\n\t" + "addi\t%0, 0x1\n\t" + "1:add\t%0, %0, %1\n\t" + "cmp.c\t%1, %0\n\t" + "bleu 1f\n\t" + "addi\t%0, 0x1\n\t" + "1:\n\t" + ".set\toptimize" : "=r" (sum), "=r" (proto) : "r" (saddr), "r" (daddr), "0" (htonl(len)), "1" (htonl(proto)), "r" (sum)); From df9e4d1c39c472cb44d81ab2ed2db503fc486e3b Mon Sep 17 00:00:00 2001 From: Lennox Wu Date: Sat, 14 Sep 2013 14:41:22 +0800 Subject: [PATCH 107/459] Score: Modify the Makefile of Score, remove -mlong-calls for compiling Signed-off-by: Lennox Wu --- arch/score/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/score/Makefile b/arch/score/Makefile index 974aefe86123..9e3e060290e0 100644 --- a/arch/score/Makefile +++ b/arch/score/Makefile @@ -20,8 +20,8 @@ cflags-y += -G0 -pipe -mel -mnhwloop -D__SCOREEL__ \ # KBUILD_AFLAGS += $(cflags-y) KBUILD_CFLAGS += $(cflags-y) -KBUILD_AFLAGS_MODULE += -mlong-calls -KBUILD_CFLAGS_MODULE += -mlong-calls +KBUILD_AFLAGS_MODULE += +KBUILD_CFLAGS_MODULE += LDFLAGS += --oformat elf32-littlescore LDFLAGS_vmlinux += -G0 -static -nostdlib From ed38665eb50ef7ad530f9b2db531a09b8520ed32 Mon Sep 17 00:00:00 2001 From: Lennox Wu Date: Thu, 26 Sep 2013 01:41:22 +0800 Subject: [PATCH 108/459] Score: Update the information of Score maintaners Signed-off-by: Lennox Wu --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index b2f857c7ecf6..efd34bdeefa7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7259,9 +7259,9 @@ F: include/linux/sched.h F: include/uapi/linux/sched.h SCORE ARCHITECTURE -M: Chen Liqin +M: Chen Liqin M: Lennox Wu -W: http://www.sunplusct.com +W: http://www.sunplus.com S: Supported F: arch/score/ From 9b0a1de3c85d99d881c86a29b3d52da7b9c7bd61 Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Tue, 17 Sep 2013 15:33:35 -0500 Subject: [PATCH 109/459] usb: musb: gadget: fix otg active status flag In gadget mode, musb->is_active should be set only when connected to the host. musb_g_reset() already takes care of it. Signed-off-by: Bin Liu Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_gadget.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 58c029f1e74c..b19ed213ab85 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1853,7 +1853,6 @@ static int musb_gadget_start(struct usb_gadget *g, musb->gadget_driver = driver; spin_lock_irqsave(&musb->lock, flags); - musb->is_active = 1; otg_set_peripheral(otg, &musb->g); musb->xceiv->state = OTG_STATE_B_IDLE; From 430b849a5e0ad5875da5bc5e10b072844dcf600f Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Thu, 19 Sep 2013 23:45:46 +0200 Subject: [PATCH 110/459] staging: lustre: Cocci spatch "noderef" sizeof when applied to a pointer typed expression gives the size of the pointer. Found by coccinelle spatch "misc/noderef.cocci" Signed-off-by: Thomas Meyer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/lustre/lustre/obdecho/echo_client.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/lustre/lustre/obdecho/echo_client.c b/drivers/staging/lustre/lustre/obdecho/echo_client.c index 2644edf438c1..c8b43442dc74 100644 --- a/drivers/staging/lustre/lustre/obdecho/echo_client.c +++ b/drivers/staging/lustre/lustre/obdecho/echo_client.c @@ -1387,7 +1387,7 @@ echo_copyout_lsm (struct lov_stripe_md *lsm, void *_ulsm, int ulsm_nob) if (nob > ulsm_nob) return (-EINVAL); - if (copy_to_user (ulsm, lsm, sizeof(ulsm))) + if (copy_to_user (ulsm, lsm, sizeof(*ulsm))) return (-EFAULT); for (i = 0; i < lsm->lsm_stripe_count; i++) { From 599aa6975e7a26ba1fee6a1eee21f46c2730890e Mon Sep 17 00:00:00 2001 From: Lidza Louina Date: Mon, 23 Sep 2013 16:13:15 -0400 Subject: [PATCH 111/459] MAINTAINERS: staging: dgnc and dgap drivers: add maintainer This patch adds the staging/dgnc [DIGI NEO AND CLASSIC PCI PRODUCTS] and staging/dgap [DIGI EPCA PCI PRODUCTS] drivers to the MAINTAINERS file. I am listed as the maintainer and the driverdev-devel list is the mailing list for these drivers. Signed-off-by: Lidza Louina Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index e61c2e83fc2b..7a426bac60e8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2639,6 +2639,18 @@ F: include/linux/device-mapper.h F: include/linux/dm-*.h F: include/uapi/linux/dm-*.h +DIGI NEO AND CLASSIC PCI PRODUCTS +M: Lidza Louina +L: driverdev-devel@linuxdriverproject.org +S: Maintained +F: drivers/staging/dgnc/ + +DIGI EPCA PCI PRODUCTS +M: Lidza Louina +L: driverdev-devel@linuxdriverproject.org +S: Maintained +F: drivers/staging/dgap/ + DIOLAN U2C-12 I2C DRIVER M: Guenter Roeck L: linux-i2c@vger.kernel.org From f6853448667b3b3234331b22d34d7158b12237fd Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Thu, 19 Sep 2013 23:45:46 +0200 Subject: [PATCH 112/459] staging: r8188eu: Add files for new drive: Cocci spatch "noderef" sizeof when applied to a pointer typed expression gives the size of the pointer. Found by coccinelle spatch "misc/noderef.cocci" Signed-off-by: Thomas Meyer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/hal/rtl8188e_dm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c b/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c index 9c2e7a20c09e..ec0028d4e61a 100644 --- a/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c +++ b/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c @@ -57,7 +57,7 @@ static void Init_ODM_ComInfo_88E(struct adapter *Adapter) u8 cut_ver, fab_ver; /* Init Value */ - _rtw_memset(dm_odm, 0, sizeof(dm_odm)); + _rtw_memset(dm_odm, 0, sizeof(*dm_odm)); dm_odm->Adapter = Adapter; From 0a69bb4691662054596f48b9a1cab8f9323442c8 Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Thu, 19 Sep 2013 23:45:46 +0200 Subject: [PATCH 113/459] staging: octeon-usb: Cocci spatch "noderef" sizeof when applied to a pointer typed expression gives the size of the pointer. Found by coccinelle spatch "misc/noderef.cocci" Signed-off-by: Thomas Meyer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/octeon-usb/cvmx-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/octeon-usb/cvmx-usb.c b/drivers/staging/octeon-usb/cvmx-usb.c index d7b3c82b5ead..45dfe94199ae 100644 --- a/drivers/staging/octeon-usb/cvmx-usb.c +++ b/drivers/staging/octeon-usb/cvmx-usb.c @@ -604,7 +604,7 @@ int cvmx_usb_initialize(struct cvmx_usb_state *state, int usb_port_number, } } - memset(usb, 0, sizeof(usb)); + memset(usb, 0, sizeof(*usb)); usb->init_flags = flags; /* Initialize the USB state structure */ From 5a2d8292f1051c1d1c08fc1732c74ac12ef61452 Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Thu, 19 Sep 2013 23:45:46 +0200 Subject: [PATCH 114/459] staging: r8188eu: Cocci spatch "noderef" sizeof when applied to a pointer typed expression gives the size of the pointer. Found by coccinelle spatch "misc/noderef.cocci" Signed-off-by: Thomas Meyer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/os_dep/ioctl_linux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c index cd4100fb3645..95953ebc0279 100644 --- a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c +++ b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c @@ -6973,7 +6973,7 @@ static int rtw_mp_ctx(struct net_device *dev, stop = strncmp(extra, "stop", 4); sscanf(extra, "count =%d, pkt", &count); - _rtw_memset(extra, '\0', sizeof(extra)); + _rtw_memset(extra, '\0', sizeof(*extra)); if (stop == 0) { bStartTest = 0; /* To set Stop */ From ffceff44e45c29943286428d246516e8e9d093d9 Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Thu, 19 Sep 2013 23:45:46 +0200 Subject: [PATCH 115/459] staging: r8188eu: Add files for new drive: Cocci spatch "noderef" sizeof when applied to a pointer typed expression gives the size of the pointer. Found by coccinelle spatch "misc/noderef.cocci" Signed-off-by: Thomas Meyer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/core/rtw_mp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/rtl8188eu/core/rtw_mp.c b/drivers/staging/rtl8188eu/core/rtw_mp.c index c7ff2e4d1f23..9832dcbbd07f 100644 --- a/drivers/staging/rtl8188eu/core/rtw_mp.c +++ b/drivers/staging/rtl8188eu/core/rtw_mp.c @@ -907,7 +907,7 @@ u32 mp_query_psd(struct adapter *pAdapter, u8 *data) sscanf(data, "pts =%d, start =%d, stop =%d", &psd_pts, &psd_start, &psd_stop); } - _rtw_memset(data, '\0', sizeof(data)); + _rtw_memset(data, '\0', sizeof(*data)); i = psd_start; while (i < psd_stop) { From 3ff4afe80e50ff4e84b4a59a38a6a657d1e7fdd1 Mon Sep 17 00:00:00 2001 From: Tobias Polzer Date: Wed, 18 Sep 2013 18:04:59 +0200 Subject: [PATCH 116/459] staging: usbip: Orphan usbip The domain of Matt Mooneey's email doesn't exist anymore. Setting usbip to Oprhan. Signed-off-by: Tobias Polzer Signed-off-by: Dominik Paulus Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 7a426bac60e8..fd4f58308a32 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8736,9 +8736,8 @@ F: Documentation/hid/hiddev.txt F: drivers/hid/usbhid/ USB/IP DRIVERS -M: Matt Mooney L: linux-usb@vger.kernel.org -S: Maintained +S: Orphan F: drivers/staging/usbip/ USB ISP116X DRIVER From c3aed2312fd3c74e77e049b795e092689d414474 Mon Sep 17 00:00:00 2001 From: Iker Pedrosa Date: Fri, 20 Sep 2013 17:11:27 +0200 Subject: [PATCH 117/459] Staging: rtl8192u: r819xU_cmdpkt: checking NULL value after doing dev_alloc_skb Checking the return of dev_alloc_skb as stated in the following bug: https://bugzilla.kernel.org/show_bug.cgi?id=60411 Signed-off-by: Iker Pedrosa Reported-by: RUC_Soft_Sec rucsoftsec@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192u/r819xU_cmdpkt.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.c b/drivers/staging/rtl8192u/r819xU_cmdpkt.c index 5bc361b16d4c..56144014b7c9 100644 --- a/drivers/staging/rtl8192u/r819xU_cmdpkt.c +++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.c @@ -37,6 +37,8 @@ rt_status SendTxCommandPacket(struct net_device *dev, void *pData, u32 DataLen) /* Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ) */ skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + DataLen + 4); + if (!skb) + return RT_STATUS_FAILURE; memcpy((unsigned char *)(skb->cb), &dev, sizeof(dev)); tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE); tcb_desc->queue_index = TXCMD_QUEUE; From 18e35e081e1bb129c6dc5a5874c260a613cd13d7 Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Sun, 22 Sep 2013 20:15:58 +0100 Subject: [PATCH 118/459] staging: vt6656: rxtx.c [BUG] s_vGetFreeContext dead lock on null apTD. There seems to be race condition that the device is ndo_start_xmit at a point where the device is closing and apTD is NULL resulting in dead lock. Add a NULL check to apTD and return NULL to calling functions. This is more likely on 64 bit systems. Signed-off-by: Malcolm Priestley Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/rxtx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c index fb743a8811bb..14f3e852215d 100644 --- a/drivers/staging/vt6656/rxtx.c +++ b/drivers/staging/vt6656/rxtx.c @@ -148,6 +148,8 @@ static void *s_vGetFreeContext(struct vnt_private *pDevice) DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"GetFreeContext()\n"); for (ii = 0; ii < pDevice->cbTD; ii++) { + if (!pDevice->apTD[ii]) + return NULL; pContext = pDevice->apTD[ii]; if (pContext->bBoolInUse == false) { pContext->bBoolInUse = true; From e3eb270fab7734427dd8171a93e4946fe28674bc Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Sun, 22 Sep 2013 19:48:54 +0100 Subject: [PATCH 119/459] staging: vt6656: [BUG] main_usb.c oops on device_close move flag earlier. The vt6656 is prone to resetting on the usb bus. It seems there is a race condition and wpa supplicant is trying to open the device via iw_handlers before its actually closed at a stage that the buffers are being removed. The device is longer considered open when the buffers are being removed. So move ~DEVICE_FLAGS_OPENED flag to before freeing the device buffers. Signed-off-by: Malcolm Priestley Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/main_usb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c index 536971786ae8..6f9d28182445 100644 --- a/drivers/staging/vt6656/main_usb.c +++ b/drivers/staging/vt6656/main_usb.c @@ -1098,6 +1098,8 @@ static int device_close(struct net_device *dev) memset(pMgmt->abyCurrBSSID, 0, 6); pMgmt->eCurrState = WMAC_STATE_IDLE; + pDevice->flags &= ~DEVICE_FLAGS_OPENED; + device_free_tx_bufs(pDevice); device_free_rx_bufs(pDevice); device_free_int_bufs(pDevice); @@ -1109,7 +1111,6 @@ static int device_close(struct net_device *dev) usb_free_urb(pDevice->pInterruptURB); BSSvClearNodeDBTable(pDevice, 0); - pDevice->flags &=(~DEVICE_FLAGS_OPENED); DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_close2 \n"); From 5e8c3d3e41b0bf241e830a1ee0752405adecc050 Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Mon, 23 Sep 2013 20:30:42 +0100 Subject: [PATCH 120/459] staging: vt6656: [BUG] iwctl_siwencodeext return if device not open Don't allow entry to iwctl_siwencodeext if device not open. This fixes a race condition where wpa supplicant/network manager enters the function when the device is already closed. Signed-off-by: Malcolm Priestley Cc: stable@vger.kernel.org # 3.8+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/iwctl.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/staging/vt6656/iwctl.c b/drivers/staging/vt6656/iwctl.c index d0cf7d8a20e5..8872e0f84f40 100644 --- a/drivers/staging/vt6656/iwctl.c +++ b/drivers/staging/vt6656/iwctl.c @@ -1634,6 +1634,9 @@ int iwctl_siwencodeext(struct net_device *dev, struct iw_request_info *info, if (pMgmt == NULL) return -EFAULT; + if (!(pDevice->flags & DEVICE_FLAGS_OPENED)) + return -ENODEV; + buf = kzalloc(sizeof(struct viawget_wpa_param), GFP_KERNEL); if (buf == NULL) return -ENOMEM; From 099326d8cde12b4aa056fbb3ee05d78e5629df02 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 17 Sep 2013 14:53:23 -0300 Subject: [PATCH 121/459] staging: imx-drm: Fix probe failure Since commit b5dc0d10 (drm/imx: kill firstopen callback) the following probe failure is seen: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] Initialized imx-drm 1.0.0 20120507 on minor 0 imx-ldb ldb.10: adding encoder failed with -16 imx-ldb: probe of ldb.10 failed with error -16 imx-ipuv3 2400000.ipu: IPUv3H probed imx-ipuv3 2800000.ipu: IPUv3H probed imx-ipuv3-crtc imx-ipuv3-crtc.0: adding crtc failed with -16. imx-ipuv3-crtc: probe of imx-ipuv3-crtc.0 failed with error -16 imx-ipuv3-crtc imx-ipuv3-crtc.1: adding crtc failed with -16. imx-ipuv3-crtc: probe of imx-ipuv3-crtc.1 failed with error -16 imx-ipuv3-crtc imx-ipuv3-crtc.2: adding crtc failed with -16. imx-ipuv3-crtc: probe of imx-ipuv3-crtc.2 failed with error -16 imx-ipuv3-crtc imx-ipuv3-crtc.3: adding crtc failed with -16. imx-ipuv3-crtc: probe of imx-ipuv3-crtc.3 failed with error -16 The reason for the probe failure is that now 'imxdrm->references' is incremented early in imx_drm_driver_load(), so the following checks in imx_drm_add_crtc() and imx_drm_add_encoder(): if (imxdrm->references) { ret = -EBUSY; goto err_busy; } ,will always fail. Instead of manually keeping the references in the imx-drm driver, let's use drm->open_count. After this patch, lvds panel is functional on a mx6qsabrelite board. Signed-off-by: Fabio Estevam Acked-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/imx-drm/imx-drm-core.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c index 47c5888461ff..a2e52a0c53c9 100644 --- a/drivers/staging/imx-drm/imx-drm-core.c +++ b/drivers/staging/imx-drm/imx-drm-core.c @@ -41,7 +41,6 @@ struct imx_drm_device { struct list_head encoder_list; struct list_head connector_list; struct mutex mutex; - int references; int pipes; struct drm_fbdev_cma *fbhelper; }; @@ -241,8 +240,6 @@ struct drm_device *imx_drm_device_get(void) } } - imxdrm->references++; - return imxdrm->drm; unwind_crtc: @@ -280,8 +277,6 @@ void imx_drm_device_put(void) list_for_each_entry(enc, &imxdrm->encoder_list, list) module_put(enc->owner); - imxdrm->references--; - mutex_unlock(&imxdrm->mutex); } EXPORT_SYMBOL_GPL(imx_drm_device_put); @@ -485,7 +480,7 @@ int imx_drm_add_crtc(struct drm_crtc *crtc, mutex_lock(&imxdrm->mutex); - if (imxdrm->references) { + if (imxdrm->drm->open_count) { ret = -EBUSY; goto err_busy; } @@ -564,7 +559,7 @@ int imx_drm_add_encoder(struct drm_encoder *encoder, mutex_lock(&imxdrm->mutex); - if (imxdrm->references) { + if (imxdrm->drm->open_count) { ret = -EBUSY; goto err_busy; } @@ -709,7 +704,7 @@ int imx_drm_add_connector(struct drm_connector *connector, mutex_lock(&imxdrm->mutex); - if (imxdrm->references) { + if (imxdrm->drm->open_count) { ret = -EBUSY; goto err_busy; } From 05c715f2a924dae2b2f6396b0109013a24502f2c Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 25 Sep 2013 18:58:13 -0500 Subject: [PATCH 122/459] [CIFS] Remove ext2 flags that have been moved to fs.h These flags were unused by cifs and since the EXT flags have been moved to common code in uapi/linux/fs.h we won't need to have a cifs specific copy. Signed-off-by: Steve French --- fs/cifs/cifspdu.h | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-) diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h index 948676db8e2e..a630475e421c 100644 --- a/fs/cifs/cifspdu.h +++ b/fs/cifs/cifspdu.h @@ -2652,26 +2652,7 @@ typedef struct file_xattr_info { } __attribute__((packed)) FILE_XATTR_INFO; /* extended attribute info level 0x205 */ - -/* flags for chattr command */ -#define EXT_SECURE_DELETE 0x00000001 /* EXT3_SECRM_FL */ -#define EXT_ENABLE_UNDELETE 0x00000002 /* EXT3_UNRM_FL */ -/* Reserved for compress file 0x4 */ -#define EXT_SYNCHRONOUS 0x00000008 /* EXT3_SYNC_FL */ -#define EXT_IMMUTABLE_FL 0x00000010 /* EXT3_IMMUTABLE_FL */ -#define EXT_OPEN_APPEND_ONLY 0x00000020 /* EXT3_APPEND_FL */ -#define EXT_DO_NOT_BACKUP 0x00000040 /* EXT3_NODUMP_FL */ -#define EXT_NO_UPDATE_ATIME 0x00000080 /* EXT3_NOATIME_FL */ -/* 0x100 through 0x800 reserved for compression flags and are GET-ONLY */ -#define EXT_HASH_TREE_INDEXED_DIR 0x00001000 /* GET-ONLY EXT3_INDEX_FL */ -/* 0x2000 reserved for IMAGIC_FL */ -#define EXT_JOURNAL_THIS_FILE 0x00004000 /* GET-ONLY EXT3_JOURNAL_DATA_FL */ -/* 0x8000 reserved for EXT3_NOTAIL_FL */ -#define EXT_SYNCHRONOUS_DIR 0x00010000 /* EXT3_DIRSYNC_FL */ -#define EXT_TOPDIR 0x00020000 /* EXT3_TOPDIR_FL */ - -#define EXT_SET_MASK 0x000300FF -#define EXT_GET_MASK 0x0003DFFF +/* flags for lsattr and chflags commands removed arein uapi/linux/fs.h */ typedef struct file_chattr_info { __le64 mask; /* list of all possible attribute bits */ From ffe67b58595eda992f369de7ac4d0a9b165074fd Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 25 Sep 2013 19:01:27 -0500 Subject: [PATCH 123/459] [CIFS] update cifs.ko version To 2.02 Signed-off-by: Steve French --- fs/cifs/cifsfs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index ea723a5e8226..6d0b07217ac9 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -132,5 +132,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg); extern const struct export_operations cifs_export_ops; #endif /* CONFIG_CIFS_NFSD_EXPORT */ -#define CIFS_VERSION "2.01" +#define CIFS_VERSION "2.02" #endif /* _CIFSFS_H */ From 8937669fd637e2edff05973cb1fdee5f910cbcc7 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Sep 2013 15:48:05 -0400 Subject: [PATCH 124/459] USB: iMX21: accept very late isochronous URBs Commit 24f531371de1 (USB: EHCI: accept very late isochronous URBs) changed the isochronous API provided by ehci-hcd. URBs submitted too late, so that the time slots for all their packets have already expired, are no longer rejected outright. Instead the submission is accepted, and the URB completes normally with a -EXDEV error for each packet. This is what client drivers expect. The same policy should be implemented in imx21-hcd, but I don't know enough about the hardware to do it. As a second-best substitute, this patch treats very late isochronous submissions as though the URB_ISO_ASAP flag were set. I don't have any way to test this change, unfortunately. Signed-off-by: Alan Stern CC: Sascha Hauer CC: Martin Fuzzey Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/imx21-hcd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index 60a5de505ca1..adb01d950a16 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -824,13 +824,13 @@ static int imx21_hc_urb_enqueue_isoc(struct usb_hcd *hcd, i = DIV_ROUND_UP(wrap_frame( cur_frame - urb->start_frame), urb->interval); - if (urb->transfer_flags & URB_ISO_ASAP) { + + /* Treat underruns as if URB_ISO_ASAP was set */ + if ((urb->transfer_flags & URB_ISO_ASAP) || + i >= urb->number_of_packets) { urb->start_frame = wrap_frame(urb->start_frame + i * urb->interval); i = 0; - } else if (i >= urb->number_of_packets) { - ret = -EXDEV; - goto alloc_dmem_failed; } } } From bef073b067a7b1874a6b381e0035bb0516d71a77 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Sep 2013 15:47:20 -0400 Subject: [PATCH 125/459] USB: UHCI: accept very late isochronous URBs Commit 24f531371de1 (USB: EHCI: accept very late isochronous URBs) changed the isochronous API provided by ehci-hcd. URBs submitted too late, so that the time slots for all their packets have already expired, are no longer rejected outright. Instead the submission is accepted, and the URB completes normally with a -EXDEV error for each packet. This is what client drivers expect. This patch implements the same policy in uhci-hcd. It should be applied to all kernels containing commit c44b225077bb (UHCI: implement new semantics for URB_ISO_ASAP). Signed-off-by: Alan Stern CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-q.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 041c6ddb695c..da6f56d996ce 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -1303,7 +1303,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, } /* Fell behind? */ - if (uhci_frame_before_eq(frame, next)) { + if (!uhci_frame_before_eq(next, frame)) { /* USB_ISO_ASAP: Round up to the first available slot */ if (urb->transfer_flags & URB_ISO_ASAP) @@ -1311,13 +1311,17 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, -qh->period; /* - * Not ASAP: Use the next slot in the stream. If - * the entire URB falls before the threshold, fail. + * Not ASAP: Use the next slot in the stream, + * no matter what. */ else if (!uhci_frame_before_eq(next, frame + (urb->number_of_packets - 1) * qh->period)) - return -EXDEV; + dev_dbg(uhci_dev(uhci), "iso underrun %p (%u+%u < %u)\n", + urb, frame, + (urb->number_of_packets - 1) * + qh->period, + next); } } From a8693424c751b8247ee19bd8b857f1d4f432b972 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Sep 2013 15:46:45 -0400 Subject: [PATCH 126/459] USB: OHCI: accept very late isochronous URBs Commit 24f531371de1 (USB: EHCI: accept very late isochronous URBs) changed the isochronous API provided by ehci-hcd. URBs submitted too late, so that the time slots for all their packets have already expired, are no longer rejected outright. Instead the submission is accepted, and the URB completes normally with a -EXDEV error for each packet. This is what client drivers expect. This patch implements the same policy in ohci-hcd. The change is more complicated than it was in ehci-hcd, because ohci-hcd doesn't scan for isochronous completions in the same way as ehci-hcd does. Rather, it depends on the hardware adding completed TDs to a "done queue". Some OHCI controller don't handle this properly when a TD's time slot has already expired, so we have to avoid adding such TDs to the schedule in the first place. As a result, if the URB was submitted too late then none of its TDs will get put on the schedule, so none of them will end up on the done queue, so the driver will never realize that the URB should be completed. To solve this problem, the patch adds one to urb_priv->td_cnt for such URBs, making it larger than urb_priv->length (td_cnt already gets set to the number of TD's that had to be skipped because their slots have expired). Each time an URB is given back, the finish_urb() routine looks to see if urb_priv->td_cnt for the next URB on the same endpoint is marked in this way. If so, it gives back the next URB right away. This should be applied to all kernels containing commit 815fa7b91761 (USB: OHCI: fix logic for scheduling isochronous URBs). Signed-off-by: Alan Stern CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hcd.c | 22 ++++++++++++---------- drivers/usb/host/ohci-q.c | 26 ++++++++++++++++++++++---- 2 files changed, 34 insertions(+), 14 deletions(-) diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 8f6b695af6a4..604cad1bcf9c 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -216,31 +216,26 @@ static int ohci_urb_enqueue ( frame &= ~(ed->interval - 1); frame |= ed->branch; urb->start_frame = frame; + ed->last_iso = frame + ed->interval * (size - 1); } } else if (ed->type == PIPE_ISOCHRONOUS) { u16 next = ohci_frame_no(ohci) + 1; u16 frame = ed->last_iso + ed->interval; + u16 length = ed->interval * (size - 1); /* Behind the scheduling threshold? */ if (unlikely(tick_before(frame, next))) { - /* USB_ISO_ASAP: Round up to the first available slot */ + /* URB_ISO_ASAP: Round up to the first available slot */ if (urb->transfer_flags & URB_ISO_ASAP) { frame += (next - frame + ed->interval - 1) & -ed->interval; /* - * Not ASAP: Use the next slot in the stream. If - * the entire URB falls before the threshold, fail. + * Not ASAP: Use the next slot in the stream, + * no matter what. */ } else { - if (tick_before(frame + ed->interval * - (urb->number_of_packets - 1), next)) { - retval = -EXDEV; - usb_hcd_unlink_urb_from_ep(hcd, urb); - goto fail; - } - /* * Some OHCI hardware doesn't handle late TDs * correctly. After retiring them it proceeds @@ -251,9 +246,16 @@ static int ohci_urb_enqueue ( urb_priv->td_cnt = DIV_ROUND_UP( (u16) (next - frame), ed->interval); + if (urb_priv->td_cnt >= urb_priv->length) { + ++urb_priv->td_cnt; /* Mark it */ + ohci_dbg(ohci, "iso underrun %p (%u+%u < %u)\n", + urb, frame, length, + next); + } } } urb->start_frame = frame; + ed->last_iso = frame + length; } /* fill the TDs and link them to the ed; and diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index df4a6707322d..e7f577e63624 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -41,9 +41,13 @@ finish_urb(struct ohci_hcd *ohci, struct urb *urb, int status) __releases(ohci->lock) __acquires(ohci->lock) { - struct device *dev = ohci_to_hcd(ohci)->self.controller; + struct device *dev = ohci_to_hcd(ohci)->self.controller; + struct usb_host_endpoint *ep = urb->ep; + struct urb_priv *urb_priv; + // ASSERT (urb->hcpriv != 0); + restart: urb_free_priv (ohci, urb->hcpriv); urb->hcpriv = NULL; if (likely(status == -EINPROGRESS)) @@ -80,6 +84,21 @@ __acquires(ohci->lock) ohci->hc_control &= ~(OHCI_CTRL_PLE|OHCI_CTRL_IE); ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); } + + /* + * An isochronous URB that is sumitted too late won't have any TDs + * (marked by the fact that the td_cnt value is larger than the + * actual number of TDs). If the next URB on this endpoint is like + * that, give it back now. + */ + if (!list_empty(&ep->urb_list)) { + urb = list_first_entry(&ep->urb_list, struct urb, urb_list); + urb_priv = urb->hcpriv; + if (urb_priv->td_cnt > urb_priv->length) { + status = 0; + goto restart; + } + } } @@ -546,7 +565,6 @@ td_fill (struct ohci_hcd *ohci, u32 info, td->hwCBP = cpu_to_hc32 (ohci, data & 0xFFFFF000); *ohci_hwPSWp(ohci, td, 0) = cpu_to_hc16 (ohci, (data & 0x0FFF) | 0xE000); - td->ed->last_iso = info & 0xffff; } else { td->hwCBP = cpu_to_hc32 (ohci, data); } @@ -996,7 +1014,7 @@ rescan_this: urb_priv->td_cnt++; /* if URB is done, clean up */ - if (urb_priv->td_cnt == urb_priv->length) { + if (urb_priv->td_cnt >= urb_priv->length) { modified = completed = 1; finish_urb(ohci, urb, 0); } @@ -1086,7 +1104,7 @@ static void takeback_td(struct ohci_hcd *ohci, struct td *td) urb_priv->td_cnt++; /* If all this urb's TDs are done, call complete() */ - if (urb_priv->td_cnt == urb_priv->length) + if (urb_priv->td_cnt >= urb_priv->length) finish_urb(ohci, urb, status); /* clean schedule: unlink EDs that are no longer busy */ From f875fdbf344b9fde207f66b392c40845dd7e5aa6 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Sep 2013 15:45:25 -0400 Subject: [PATCH 127/459] USB: fix PM config symbol in uhci-hcd, ehci-hcd, and xhci-hcd Since uhci-hcd, ehci-hcd, and xhci-hcd support runtime PM, the .pm field in their pci_driver structures should be protected by CONFIG_PM rather than CONFIG_PM_SLEEP. The corresponding change has already been made for ohci-hcd. Without this change, controllers won't do runtime suspend if system suspend or hibernation isn't enabled. Signed-off-by: Alan Stern CC: Sarah Sharp CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-pci.c | 2 +- drivers/usb/host/uhci-pci.c | 2 +- drivers/usb/host/xhci-pci.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 6bd299e61f58..854c2ec7b699 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -361,7 +361,7 @@ static struct pci_driver ehci_pci_driver = { .remove = usb_hcd_pci_remove, .shutdown = usb_hcd_pci_shutdown, -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM .driver = { .pm = &usb_hcd_pci_pm_ops }, diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c index c300bd2f7d1c..0f228c46eeda 100644 --- a/drivers/usb/host/uhci-pci.c +++ b/drivers/usb/host/uhci-pci.c @@ -293,7 +293,7 @@ static struct pci_driver uhci_pci_driver = { .remove = usb_hcd_pci_remove, .shutdown = uhci_shutdown, -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM .driver = { .pm = &usb_hcd_pci_pm_ops }, diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index c2d495057eb5..236c3aabe940 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -351,7 +351,7 @@ static struct pci_driver xhci_pci_driver = { /* suspend and resume implemented later */ .shutdown = usb_hcd_pci_shutdown, -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM .driver = { .pm = &usb_hcd_pci_pm_ops }, From f84839daa793f36ec7f8795d7510f0d61fa8875a Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 17 Sep 2013 12:37:20 +0800 Subject: [PATCH 128/459] usb: chipidea: udc: fix the oops after rmmod gadget When we rmmod gadget, the ci->driver needs to be cleared. Otherwise, when we plug in usb cable again, the driver will consider gadget is there, and go to enumeration procedure, but in fact, it was removed. ci_hdrc ci_hdrc.0: Connected to host Unable to handle kernel paging request at virtual address 7f02a42c pgd = 80004000 [7f02a42c] *pgd=3f13d811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] SMP ARM Modules linked in: usb_f_acm u_serial libcomposite configfs [last unloaded: g_serial] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0+ #42 task: 807dba88 ti: 807d0000 task.ti: 807d0000 PC is at udc_irq+0x8fc/0xea4 LR is at l2x0_cache_sync+0x5c/0x6c pc : [<803de7f4>] lr : [<8001d0f0>] psr: 20000193 sp : 807d1d98 ip : 807d1d80 fp : 807d1df4 r10: af809900 r9 : 808184d4 r8 : 00080001 r7 : 00082001 r6 : afb711f8 r5 : afb71010 r4 : ffffffea r3 : 7f02a41c r2 : afb71010 r1 : 807d1dc0 r0 : afb71068 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 3f01804a DAC: 00000017 Process swapper/0 (pid: 0, stack limit = 0x807d0238) Stack: (0x807d1d98 to 0x807d2000) 1d80: 00000000 afb71014 1da0: 000040f6 00000000 00000001 00000000 00007530 00000000 afb71010 001dcd65 1dc0: 01000680 00400000 807d1e2c afb71010 0000004e 00000000 00000000 0000004b 1de0: 808184d4 af809900 807d1e0c 807d1df8 803dbc24 803ddf04 afba75c0 0000004e 1e00: 807d1e44 807d1e10 8007a19c 803dbb9c 8108e7e0 8108e7e0 9ceddce0 af809900 1e20: 0000004e 807d0000 0000004b 00000000 00000010 00000000 807d1e5c 807d1e48 1e40: 8007a334 8007a154 af809900 0000004e 807d1e74 807d1e60 8007d3b4 8007a2f0 1e60: 0000004b 807cce3c 807d1e8c 807d1e78 80079b08 8007d300 00000180 807d8ba0 1e80: 807d1eb4 807d1e90 8000eef4 80079aec 00000000 f400010c 807d8ce4 807d1ed8 1ea0: f4000100 96d5c75d 807d1ed4 807d1eb8 80008600 8000eeac 8042699c 60000013 1ec0: ffffffff 807d1f0c 807d1f54 807d1ed8 8000e180 800085dc 807d1f20 00000046 1ee0: 9cedd275 00000010 8108f080 807de294 00000001 807de248 96d5c75d 00000010 1f00: 00000000 807d1f54 00000000 807d1f20 8005ff54 8042699c 60000013 ffffffff 1f20: 9cedd275 00000010 00000005 8108f080 8108f080 00000001 807de248 8086bd00 1f40: 807d0000 00000001 807d1f7c 807d1f58 80426af0 80426950 807d0000 00000000 1f60: 808184c0 808184c0 807d8954 805b886c 807d1f8c 807d1f80 8000f294 80426a44 1f80: 807d1fac 807d1f90 8005f110 8000f288 807d1fac 807d8908 805b4748 807dc86c 1fa0: 807d1fbc 807d1fb0 805aa58c 8005f068 807d1ff4 807d1fc0 8077c860 805aa530 1fc0: ffffffff ffffffff 8077c330 00000000 00000000 807bef88 00000000 10c53c7d 1fe0: 807d88d0 807bef84 00000000 807d1ff8 10008074 8077c594 00000000 00000000 Backtrace: [<803ddef8>] (udc_irq+0x0/0xea4) from [<803dbc24>] (ci_irq+0x94/0x14c) [<803dbb90>] (ci_irq+0x0/0x14c) from [<8007a19c>] (handle_irq_event_percpu+0x54/0x19c) r5:0000004e r4:afba75c0 [<8007a148>] (handle_irq_event_percpu+0x0/0x19c) from [<8007a334>] (handle_irq_event+0x50/0x70) [<8007a2e4>] (handle_irq_event+0x0/0x70) from [<8007d3b4>] (handle_fasteoi_irq+0xc0/0x16c) r5:0000004e r4:af809900 [<8007d2f4>] (handle_fasteoi_irq+0x0/0x16c) from [<80079b08>] (generic_handle_irq+0x28/0x38) r5:807cce3c r4:0000004b [<80079ae0>] (generic_handle_irq+0x0/0x38) from [<8000eef4>] (handle_IRQ+0x54/0xb4) r4:807d8ba0 r3:00000180 [<8000eea0>] (handle_IRQ+0x0/0xb4) from [<80008600>] (gic_handle_irq+0x30/0x64) r8:96d5c75d r7:f4000100 r6:807d1ed8 r5:807d8ce4 r4:f400010c r3:00000000 [<800085d0>] (gic_handle_irq+0x0/0x64) from [<8000e180>] (__irq_svc+0x40/0x54) Exception stack(0x807d1ed8 to 0x807d1f20) 1ec0: 807d1f20 00000046 1ee0: 9cedd275 00000010 8108f080 807de294 00000001 807de248 96d5c75d 00000010 1f00: 00000000 807d1f54 00000000 807d1f20 8005ff54 8042699c 60000013 ffffffff r7:807d1f0c r6:ffffffff r5:60000013 r4:8042699c [<80426944>] (cpuidle_enter_state+0x0/0xf4) from [<80426af0>] (cpuidle_idle_call+0xb8/0x174) r9:00000001 r8:807d0000 r7:8086bd00 r6:807de248 r5:00000001 r4:8108f080 [<80426a38>] (cpuidle_idle_call+0x0/0x174) from [<8000f294>] (arch_cpu_idle+0x18/0x5c) [<8000f27c>] (arch_cpu_idle+0x0/0x5c) from [<8005f110>] (cpu_startup_entry+0xb4/0x148) [<8005f05c>] (cpu_startup_entry+0x0/0x148) from [<805aa58c>] (rest_init+0x68/0x80) r7:807dc86c [<805aa524>] (rest_init+0x0/0x80) from [<8077c860>] (start_kernel+0x2d8/0x334) [<8077c588>] (start_kernel+0x0/0x334) from [<10008074>] (0x10008074) Code: e59031e0 e51b203c e24b1034 e2820058 (e5933010) ---[ end trace f874b2c5533c04bc ]--- Kernel panic - not syncing: Fatal exception in interrupt Tested-by: Marek Vasut Acked-by: Shawn Guo Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 6b4c2f2eb946..5280454fb2a7 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1667,13 +1667,13 @@ static int ci_udc_stop(struct usb_gadget *gadget, if (ci->platdata->notify_event) ci->platdata->notify_event(ci, CI_HDRC_CONTROLLER_STOPPED_EVENT); - ci->driver = NULL; spin_unlock_irqrestore(&ci->lock, flags); _gadget_stop_activity(&ci->gadget); spin_lock_irqsave(&ci->lock, flags); pm_runtime_put(&ci->gadget.dev); } + ci->driver = NULL; spin_unlock_irqrestore(&ci->lock, flags); return 0; From 222bed9b2dff53e4402d4819d6fca09e26b765fb Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 17 Sep 2013 12:37:21 +0800 Subject: [PATCH 129/459] usb: chipidea: Fix memleak for ci->hw_bank.regmap when removal It needs to free ci->hw_bank.regmap explicitly since it is not managed resource. Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 94626409559a..23763dcec069 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -605,6 +605,7 @@ static int ci_hdrc_remove(struct platform_device *pdev) dbg_remove_files(ci); free_irq(ci->irq, ci); ci_role_destroy(ci); + kfree(ci->hw_bank.regmap); return 0; } From 3a254fea70f402859b92a9cd4299ee5de3bbc2f6 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 17 Sep 2013 12:37:23 +0800 Subject: [PATCH 130/459] usb: chipidea: imx: Add usb_phy_shutdown at probe's error path If not, the PHY will be active even the controller is not in use. We find this issue due to the PHY's clock refcount is not correct due to -EPROBE_DEFER return after phy's init. Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/ci_hdrc_imx.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 74d998d9b45b..be822a2c1776 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -131,7 +131,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "usbmisc init failed, ret=%d\n", ret); - goto err_clk; + goto err_phy; } } @@ -143,7 +143,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Can't register ci_hdrc platform device, err=%d\n", ret); - goto err_clk; + goto err_phy; } if (data->usbmisc_data) { @@ -164,6 +164,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) disable_device: ci_hdrc_remove_device(data->ci_pdev); +err_phy: + if (data->phy) + usb_phy_shutdown(data->phy); err_clk: clk_disable_unprepare(data->clk); return ret; From e7ef5265b158ac1975b1556511e2b11bad5f5522 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 17 Sep 2013 12:37:24 +0800 Subject: [PATCH 131/459] usb: chipidea: udc: free pending TD at removal procedure There is a pending TD which is not freed after request finishes, we do this due to a controller bug. This TD needs to be freed when the driver is removed. It prints below error message when unload chipidea driver at current code: "ci_hdrc ci_hdrc.0: dma_pool_destroy ci_hw_td, b0001000 busy" It indicates the buffer at dma pool are still in use. This commit will free the pending TD at driver's removal procedure, it can fix the problem described above. Acked-by: Michael Grzeschik Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/udc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 5280454fb2a7..9333083dd111 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1600,6 +1600,8 @@ static void destroy_eps(struct ci_hdrc *ci) for (i = 0; i < ci->hw_ep_max; i++) { struct ci_hw_ep *hwep = &ci->ci_hw_ep[i]; + if (hwep->pending_td) + free_pending_td(hwep); dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma); } } From 2c740336159d9785ae81e8f9d6ba1a6b922723c9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 17 Sep 2013 12:37:25 +0800 Subject: [PATCH 132/459] usb: chipidea: USB_CHIPIDEA should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `dma_set_coherent_mask': include/linux/dma-mapping.h:93: undefined reference to `dma_supported' Reviewed-and-tested-by: Peter Chen Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 4a851e15e58c..77b47d82c9a6 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -1,6 +1,6 @@ config USB_CHIPIDEA tristate "ChipIdea Highspeed Dual Role Controller" - depends on (USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET) + depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA help Say Y here if your system has a dual role high speed USB controller based on ChipIdea silicon IP. Currently, only the From 831abf76643555a99b80a3b54adfa7e4fa0a3259 Mon Sep 17 00:00:00 2001 From: Kurt Garloff Date: Tue, 24 Sep 2013 14:13:48 +0200 Subject: [PATCH 133/459] usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit Trying to read data from the Pegasus Technologies NoteTaker (0e20:0101) [1] with the Windows App (EasyNote) works natively but fails when Windows is running under KVM (and the USB device handed to KVM). The reason is a USB control message usb 4-2.2: control urb: bRequestType=22 bRequest=09 wValue=0200 wIndex=0001 wLength=0008 This goes to endpoint address 0x01 (wIndex); however, endpoint address 0x01 does not exist. There is an endpoint 0x81 though (same number, but other direction); the app may have meant that endpoint instead. The kernel thus rejects the IO and thus we see the failure. Apparently, Linux is more strict here than Windows ... we can't change the Win app easily, so that's a problem. It seems that the Win app/driver is buggy here and the driver does not behave fully according to the USB HID class spec that it claims to belong to. The device seems to happily deal with that though (and seems to not really care about this value much). So the question is whether the Linux kernel should filter here. Rejecting has the risk that somewhat non-compliant userspace apps/ drivers (most likely in a virtual machine) are prevented from working. Not rejecting has the risk of confusing an overly sensitive device with such a transfer. Given the fact that Windows does not filter it makes this risk rather small though. The patch makes the kernel more tolerant: If the endpoint address in wIndex does not exist, but an endpoint with toggled direction bit does, it will let the transfer through. (It does NOT change the message.) With attached patch, the app in Windows in KVM works. usb 4-2.2: check_ctrlrecip: process 13073 (qemu-kvm) requesting ep 01 but needs 81 I suspect this will mostly affect apps in virtual environments; as on Linux the apps would have been adapted to the stricter handling of the kernel. I have done that for mine[2]. [1] http://www.pegatech.com/ [2] https://sourceforge.net/projects/notetakerpen/ Signed-off-by: Kurt Garloff Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 737e3c19967b..71dc5d768fa5 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -742,6 +742,22 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, if ((index & ~USB_DIR_IN) == 0) return 0; ret = findintfep(ps->dev, index); + if (ret < 0) { + /* + * Some not fully compliant Win apps seem to get + * index wrong and have the endpoint number here + * rather than the endpoint address (with the + * correct direction). Win does let this through, + * so we'll not reject it here but leave it to + * the device to not break KVM. But we warn. + */ + ret = findintfep(ps->dev, index ^ 0x80); + if (ret >= 0) + dev_info(&ps->dev->dev, + "%s: process %i (%s) requesting ep %02x but needs %02x\n", + __func__, task_pid_nr(current), + current->comm, index, index ^ 0x80); + } if (ret >= 0) ret = checkintf(ps, ret); break; From 5cec7bf699c61d14f0538345076480bb8c8ebfbb Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 25 Sep 2013 20:13:04 -0400 Subject: [PATCH 134/459] tty: Fix SIGTTOU not sent with tcflush() Commit 'e7f3880cd9b98c5bf9391ae7acdec82b75403776' tty: Fix recursive deadlock in tty_perform_flush() introduced a regression where tcflush() does not generate SIGTTOU for background process groups. Make sure ioctl(TCFLSH) calls tty_check_change() when invoked from the line discipline. Cc: stable@vger.kernel.org # v3.10+ Reported-by: Oleg Nesterov Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_ioctl.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 03ba081c5772..6fd60fece6b4 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -1201,6 +1201,9 @@ int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, } return 0; case TCFLSH: + retval = tty_check_change(tty); + if (retval) + return retval; return __tty_perform_flush(tty, arg); default: /* Try the mode commands */ From 4dc3231f818baf7415c67ee06c51ace0973ae736 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 25 Sep 2013 12:11:33 +0200 Subject: [PATCH 135/459] ARM: mach-integrator: Add stub for pci_v3_early_init() for !CONFIG_PCI This fixes a compile error where CONFIG_PCI is disabled: LD init/built-in.o arch/arm/mach-integrator/built-in.o: In function `ap_map_io': integrator_cp.c:(.init.text+0x570): undefined reference to `pci_v3_early_init' make[1]: *** [vmlinux] Error 1 make: *** [sub-make] Error 2 Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel Reviewed-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/mach-integrator/pci_v3.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-integrator/pci_v3.h b/arch/arm/mach-integrator/pci_v3.h index 755fd29fed4a..06a9e2e7d007 100644 --- a/arch/arm/mach-integrator/pci_v3.h +++ b/arch/arm/mach-integrator/pci_v3.h @@ -1,2 +1,9 @@ /* Simple oneliner include to the PCIv3 early init */ +#ifdef CONFIG_PCI extern int pci_v3_early_init(void); +#else +static inline int pci_v3_early_init(void) +{ + return 0; +} +#endif From 19872d20c890073c5207d9e02bb8f14d451a11eb Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Mon, 9 Sep 2013 18:33:54 +0200 Subject: [PATCH 136/459] HID: uhid: allocate static minor udev has this nice feature of creating "dead" /dev/ device-nodes if it finds a devnode: modalias. Once the node is accessed, the kernel automatically loads the module that provides the node. However, this requires udev to know the major:minor code to use for the node. This feature was introduced by: commit 578454ff7eab61d13a26b568f99a89a2c9edc881 Author: Kay Sievers Date: Thu May 20 18:07:20 2010 +0200 driver core: add devname module aliases to allow module on-demand auto-loading However, uhid uses dynamic minor numbers so this doesn't actually work. We need to load uhid to know which minor it's going to use. Hence, allocate a static minor (just like uinput does) and we're good to go. Reported-by: Tom Gundersen Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/uhid.c | 3 ++- include/linux/miscdevice.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/hid/uhid.c b/drivers/hid/uhid.c index 5bf2fb785844..93b00d76374c 100644 --- a/drivers/hid/uhid.c +++ b/drivers/hid/uhid.c @@ -615,7 +615,7 @@ static const struct file_operations uhid_fops = { static struct miscdevice uhid_misc = { .fops = &uhid_fops, - .minor = MISC_DYNAMIC_MINOR, + .minor = UHID_MINOR, .name = UHID_NAME, }; @@ -634,4 +634,5 @@ module_exit(uhid_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("David Herrmann "); MODULE_DESCRIPTION("User-space I/O driver support for HID subsystem"); +MODULE_ALIAS_MISCDEV(UHID_MINOR); MODULE_ALIAS("devname:" UHID_NAME); diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index 09c2300ddb37..cb358355ef43 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -45,6 +45,7 @@ #define MAPPER_CTRL_MINOR 236 #define LOOP_CTRL_MINOR 237 #define VHOST_NET_MINOR 238 +#define UHID_MINOR 239 #define MISC_DYNAMIC_MINOR 255 struct device; From a8b22c1ccccd2a5368f803afab41b4301832ff10 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 25 Sep 2013 15:21:08 +0200 Subject: [PATCH 137/459] ASoC: imx-sgtl5000: do not use devres on a foreign device Calling devm_clk_get with any device pointer other than our own confuses devres. Use clk_get instead. This avoids hitting the following warning in the imx-sgtl5000 error path: imx-sgtl5000 sound.12: snd_soc_register_card failed (-517) platform sound.12: Driver imx-sgtl5000 requests probe deferral ------------[ cut here ]------------ WARNING: CPU: 0 PID: 75 at drivers/base/dd.c:272 driver_probe_device+0x194/0x218() Modules linked in: snd_soc_sgtl5000(+) snd_soc_imx_sgtl5000 coda snd_soc_imx_audmux imx_sdma snd_soc_fsl_spdif snd_soc_fsl_ssi CPU: 0 PID: 75 Comm: udevd Not tainted 3.11.0-rc6+ #4682 Backtrace: [<80010bc4>] (dump_backtrace+0x0/0x10c) from [<80010d60>] (show_stack+0x18/0x1c) r6:00000110 r5:00000009 r4:00000000 r3:00000000 [<80010d48>] (show_stack+0x0/0x1c) from [<804f0764>] (dump_stack+0x20/0x28) [<804f0744>] (dump_stack+0x0/0x28) from [<8001a4a4>] (warn_slowpath_common+0x6c/0x8c) [<8001a438>] (warn_slowpath_common+0x0/0x8c) from [<8001a4e8>] (warn_slowpath_null+0x24/0x2c) r8:7f032000 r7:7f02f93c r6:cf8eaa54 r5:cf8eaa20 r4:80728a0c [<8001a4c4>] (warn_slowpath_null+0x0/0x2c) from [<80286bdc>] (driver_probe_device+0x194/0x218) [<80286a48>] (driver_probe_device+0x0/0x218) from [<80286cf4>] (__driver_attach+0x94/0x98) r7:00000000 r6:cf8eaa54 r5:7f02f93c r4:cf8eaa20 [<80286c60>] (__driver_attach+0x0/0x98) from [<802851c8>] (bus_for_each_dev+0x5c/0x90) r6:80286c60 r5:7f02f93c r4:00000000 r3:cf8ef03c [<8028516c>] (bus_for_each_dev+0x0/0x90) from [<80286654>] (driver_attach+0x24/0x28) r6:806d0424 r5:cf16a580 r4:7f02f93c [<80286630>] (driver_attach+0x0/0x28) from [<802861e4>] (bus_add_driver+0xdc/0x234) [<80286108>] (bus_add_driver+0x0/0x234) from [<802871d4>] (driver_register+0x80/0x154) r8:7f032000 r7:00000001 r6:7f02fa68 r5:7f02fa74 r4:7f02f93c [<80287154>] (driver_register+0x0/0x154) from [<8033c278>] (i2c_register_driver+0x34/0xbc) [<8033c244>] (i2c_register_driver+0x0/0xbc) from [<7f032018>] (sgtl5000_i2c_driver_init+0x18/0x24 [snd_soc_sgtl5000]) r5:7f02fa74 r4:cfb7ff48 [<7f032000>] (sgtl5000_i2c_driver_init+0x0/0x24 [snd_soc_sgtl5000]) from [<80008738>] (do_one_initcall+0xf4/0x150) [<80008644>] (do_one_initcall+0x0/0x150) from [<80053f64>] (load_module+0x174c/0x1db4) [<80052818>] (load_module+0x0/0x1db4) from [<800546ac>] (SyS_init_module+0xe0/0xf4) [<800545cc>] (SyS_init_module+0x0/0xf4) from [<8000e540>] (ret_fast_syscall+0x0/0x30) r6:00005b22 r5:00afed68 r4:00000000 ---[ end trace b24c5c3bb145dbdd ]--- Signed-off-by: Philipp Zabel Acked-by: Shawn Guo Reviewed-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/fsl/imx-sgtl5000.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c index 46c5b4fdfc52..52df7d5eaf9e 100644 --- a/sound/soc/fsl/imx-sgtl5000.c +++ b/sound/soc/fsl/imx-sgtl5000.c @@ -128,7 +128,7 @@ static int imx_sgtl5000_probe(struct platform_device *pdev) goto fail; } - data->codec_clk = devm_clk_get(&codec_dev->dev, NULL); + data->codec_clk = clk_get(&codec_dev->dev, NULL); if (IS_ERR(data->codec_clk)) { ret = PTR_ERR(data->codec_clk); goto fail; @@ -172,6 +172,8 @@ static int imx_sgtl5000_probe(struct platform_device *pdev) return 0; fail: + if (!IS_ERR(data->codec_clk)) + clk_put(data->codec_clk); if (ssi_np) of_node_put(ssi_np); if (codec_np) @@ -185,6 +187,7 @@ static int imx_sgtl5000_remove(struct platform_device *pdev) struct imx_sgtl5000_data *data = platform_get_drvdata(pdev); snd_soc_unregister_card(&data->card); + clk_put(data->codec_clk); return 0; } From 50d4a790e65f5ac91a7b2720a19e80e862b40318 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 25 Sep 2013 15:22:01 +0200 Subject: [PATCH 138/459] ASoC: imx-sgtl5000: Fix uninitialized pointer use in error path This patch avoids to dereference the uninitialized data pointer if the error path is entered before devm_kzalloc is called (or if the allocation fails). It fixes the following warning: sound/soc/fsl/imx-sgtl5000.c: In function 'imx_sgtl5000_probe': sound/soc/fsl/imx-sgtl5000.c:175:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Philipp Zabel Signed-off-by: Mark Brown --- sound/soc/fsl/imx-sgtl5000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c index 52df7d5eaf9e..ca1be1d9dcf0 100644 --- a/sound/soc/fsl/imx-sgtl5000.c +++ b/sound/soc/fsl/imx-sgtl5000.c @@ -62,7 +62,7 @@ static int imx_sgtl5000_probe(struct platform_device *pdev) struct device_node *ssi_np, *codec_np; struct platform_device *ssi_pdev; struct i2c_client *codec_dev; - struct imx_sgtl5000_data *data; + struct imx_sgtl5000_data *data = NULL; int int_port, ext_port; int ret; @@ -172,7 +172,7 @@ static int imx_sgtl5000_probe(struct platform_device *pdev) return 0; fail: - if (!IS_ERR(data->codec_clk)) + if (data && !IS_ERR(data->codec_clk)) clk_put(data->codec_clk); if (ssi_np) of_node_put(ssi_np); From 5bc2afc2b53fc73f154e6344cd898585628e6d27 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 23 Sep 2013 18:01:28 -0400 Subject: [PATCH 139/459] NFSv4: Honour the 'opened' parameter in the atomic_open() filesystem method Determine if we've created a new file by examining the directory change attribute and/or the O_EXCL flag. This fixes a regression when doing a non-exclusive create of a new file. If the FILE_CREATED flag is not set, the atomic_open() command will perform full file access permissions checks instead of just checking for MAY_OPEN. Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 2 +- fs/nfs/nfs4file.c | 3 ++- fs/nfs/nfs4proc.c | 26 +++++++++++++++++++------- include/linux/nfs_xdr.h | 3 ++- 4 files changed, 24 insertions(+), 10 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 854a8f05a610..02b0df769e2d 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1458,7 +1458,7 @@ int nfs_atomic_open(struct inode *dir, struct dentry *dentry, trace_nfs_atomic_open_enter(dir, ctx, open_flags); nfs_block_sillyrename(dentry->d_parent); - inode = NFS_PROTO(dir)->open_context(dir, ctx, open_flags, &attr); + inode = NFS_PROTO(dir)->open_context(dir, ctx, open_flags, &attr, opened); nfs_unblock_sillyrename(dentry->d_parent); if (IS_ERR(inode)) { err = PTR_ERR(inode); diff --git a/fs/nfs/nfs4file.c b/fs/nfs/nfs4file.c index e5b804dd944c..77efaf15ec90 100644 --- a/fs/nfs/nfs4file.c +++ b/fs/nfs/nfs4file.c @@ -19,6 +19,7 @@ nfs4_file_open(struct inode *inode, struct file *filp) struct inode *dir; unsigned openflags = filp->f_flags; struct iattr attr; + int opened = 0; int err; /* @@ -55,7 +56,7 @@ nfs4_file_open(struct inode *inode, struct file *filp) nfs_wb_all(inode); } - inode = NFS_PROTO(dir)->open_context(dir, ctx, openflags, &attr); + inode = NFS_PROTO(dir)->open_context(dir, ctx, openflags, &attr, &opened); if (IS_ERR(inode)) { err = PTR_ERR(inode); switch (err) { diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 989bb9d3074d..488ef9b5c51a 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -912,6 +912,7 @@ struct nfs4_opendata { struct iattr attrs; unsigned long timestamp; unsigned int rpc_done : 1; + unsigned int file_created : 1; unsigned int is_recover : 1; int rpc_status; int cancelled; @@ -1946,8 +1947,13 @@ static int _nfs4_proc_open(struct nfs4_opendata *data) nfs_fattr_map_and_free_names(server, &data->f_attr); - if (o_arg->open_flags & O_CREAT) + if (o_arg->open_flags & O_CREAT) { update_changeattr(dir, &o_res->cinfo); + if (o_arg->open_flags & O_EXCL) + data->file_created = 1; + else if (o_res->cinfo.before != o_res->cinfo.after) + data->file_created = 1; + } if ((o_res->rflags & NFS4_OPEN_RESULT_LOCKTYPE_POSIX) == 0) server->caps &= ~NFS_CAP_POSIX_LOCK; if(o_res->rflags & NFS4_OPEN_RESULT_CONFIRM) { @@ -2191,7 +2197,8 @@ static int _nfs4_do_open(struct inode *dir, struct nfs_open_context *ctx, int flags, struct iattr *sattr, - struct nfs4_label *label) + struct nfs4_label *label, + int *opened) { struct nfs4_state_owner *sp; struct nfs4_state *state = NULL; @@ -2261,6 +2268,8 @@ static int _nfs4_do_open(struct inode *dir, nfs_setsecurity(state->inode, opendata->o_res.f_attr, olabel); } } + if (opendata->file_created) + *opened |= FILE_CREATED; if (pnfs_use_threshold(ctx_th, opendata->f_attr.mdsthreshold, server)) *ctx_th = opendata->f_attr.mdsthreshold; @@ -2289,7 +2298,8 @@ static struct nfs4_state *nfs4_do_open(struct inode *dir, struct nfs_open_context *ctx, int flags, struct iattr *sattr, - struct nfs4_label *label) + struct nfs4_label *label, + int *opened) { struct nfs_server *server = NFS_SERVER(dir); struct nfs4_exception exception = { }; @@ -2297,7 +2307,7 @@ static struct nfs4_state *nfs4_do_open(struct inode *dir, int status; do { - status = _nfs4_do_open(dir, ctx, flags, sattr, label); + status = _nfs4_do_open(dir, ctx, flags, sattr, label, opened); res = ctx->state; trace_nfs4_open_file(ctx, flags, status); if (status == 0) @@ -2659,7 +2669,8 @@ out: } static struct inode * -nfs4_atomic_open(struct inode *dir, struct nfs_open_context *ctx, int open_flags, struct iattr *attr) +nfs4_atomic_open(struct inode *dir, struct nfs_open_context *ctx, + int open_flags, struct iattr *attr, int *opened) { struct nfs4_state *state; struct nfs4_label l = {0, 0, 0, NULL}, *label = NULL; @@ -2667,7 +2678,7 @@ nfs4_atomic_open(struct inode *dir, struct nfs_open_context *ctx, int open_flags label = nfs4_label_init_security(dir, ctx->dentry, attr, &l); /* Protect against concurrent sillydeletes */ - state = nfs4_do_open(dir, ctx, open_flags, attr, label); + state = nfs4_do_open(dir, ctx, open_flags, attr, label, opened); nfs4_label_release_security(label); @@ -3332,6 +3343,7 @@ nfs4_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr, struct nfs4_label l, *ilabel = NULL; struct nfs_open_context *ctx; struct nfs4_state *state; + int opened = 0; int status = 0; ctx = alloc_nfs_open_context(dentry, FMODE_READ); @@ -3341,7 +3353,7 @@ nfs4_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr, ilabel = nfs4_label_init_security(dir, dentry, sattr, &l); sattr->ia_mode &= ~current_umask(); - state = nfs4_do_open(dir, ctx, flags, sattr, ilabel); + state = nfs4_do_open(dir, ctx, flags, sattr, ilabel, &opened); if (IS_ERR(state)) { status = PTR_ERR(state); goto out; diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 01fd84b566f7..49f52c8f4422 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1455,7 +1455,8 @@ struct nfs_rpc_ops { struct inode * (*open_context) (struct inode *dir, struct nfs_open_context *ctx, int open_flags, - struct iattr *iattr); + struct iattr *iattr, + int *); int (*have_delegation)(struct inode *, fmode_t); int (*return_delegation)(struct inode *); struct nfs_client *(*alloc_client) (const struct nfs_client_initdata *); From 86c7d8d4168ce85cb9d880b247f941786ba0724b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 14 Sep 2013 15:46:33 +0200 Subject: [PATCH 140/459] ath9k: fix stale flag handling on buffer clone Fixes a regression from commit "ath9k: shrink a few data structures by reordering fields" When cloning a buffer, the stale flag (part of bf_state now) needs to be reset after copying the state to prevent tx processing hangs. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 35b515fe3ffa..a749e0f5ab54 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -399,6 +399,7 @@ static struct ath_buf* ath_clone_txbuf(struct ath_softc *sc, struct ath_buf *bf) tbf->bf_buf_addr = bf->bf_buf_addr; memcpy(tbf->bf_desc, bf->bf_desc, sc->sc_ah->caps.tx_desc_len); tbf->bf_state = bf->bf_state; + tbf->bf_state.stale = false; return tbf; } From 440c1c874a8e40a13fc2c799e05c469e1d67e9be Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 14 Sep 2013 17:02:29 +0200 Subject: [PATCH 141/459] ath9k: do not link bf_next across multiple A-MPDUs This might trip up tx completion processing, although the condition that triggers this should not (yet) occur in practice. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index a749e0f5ab54..58499603f705 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1951,7 +1951,9 @@ static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq, if (bf_is_ampdu_not_probing(bf)) txq->axq_ampdu_depth++; - bf = bf->bf_lastbf->bf_next; + bf_last = bf->bf_lastbf; + bf = bf_last->bf_next; + bf_last->bf_next = NULL; } } } From d29a5fd888918c35eb74496637d448ac37866c6e Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 16 Sep 2013 10:24:51 +0530 Subject: [PATCH 142/459] ath9k: Fix regression in LNA diversity The commit "ath9k: Optimize LNA check" tried to use the "rs_firstaggr" flag to optimize the LNA combining algorithm when processing subframes in an A-MPDU. This doesn't appear to work well in practice, so revert it and use the old method of relying on "rs_moreaggr". Cc: stable@vger.kernel.org # 3.11 Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 4ee472a5a4e4..ab9e3a8410bc 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1269,13 +1269,6 @@ static void ath9k_antenna_check(struct ath_softc *sc, if (!(ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB)) return; - /* - * All MPDUs in an aggregate will use the same LNA - * as the first MPDU. - */ - if (rs->rs_isaggr && !rs->rs_firstaggr) - return; - /* * Change the default rx antenna if rx diversity * chooses the other antenna 3 times in a row. From 20e6e55aaaa6745fbc815845e2e5e20dc35d62e5 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 17 Sep 2013 12:05:15 +0200 Subject: [PATCH 143/459] ath9k: don't use BAW tracking on PS responses for non-AMPDU packets When .release_buffered_frames was implemented, only A-MPDU packets were buffered internally. Now that this has changed, the BUF_AMPDU flag needs to be checked before calling ath_tx_addto_baw Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 58499603f705..9b3736ea2aaf 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1556,8 +1556,10 @@ void ath9k_release_buffered_frames(struct ieee80211_hw *hw, __skb_unlink(bf->bf_mpdu, tid_q); list_add_tail(&bf->list, &bf_q); ath_set_rates(tid->an->vif, tid->an->sta, bf); - ath_tx_addto_baw(sc, tid, bf); - bf->bf_state.bf_type &= ~BUF_AGGR; + if (bf_isampdu(bf)) { + ath_tx_addto_baw(sc, tid, bf); + bf->bf_state.bf_type &= ~BUF_AGGR; + } if (bf_tail) bf_tail->bf_next = bf; From e78641c19de7a3b77b5d840aff239c6648983099 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Wed, 18 Sep 2013 00:57:59 +0400 Subject: [PATCH 144/459] p54usb: fix leak at failure path in p54u_load_firmware() If request_firmware_nowait() fails in p54u_load_firmware(), p54u_load_firmware_cb is not called and no one decrements usb_dev refcnt. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index b9deef66cf4b..7fa81d13b4e5 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -979,6 +979,7 @@ static int p54u_load_firmware(struct ieee80211_hw *dev, if (err) { dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s " "(%d)!\n", p54u_fwlist[i].fw, err); + usb_put_dev(udev); } return err; From 919123d246adf3e69320900842015368c2384d0f Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 18 Sep 2013 15:23:41 +0200 Subject: [PATCH 145/459] ath9k: add txq locking for ath_tx_aggr_start Prevents race conditions when un-aggregated frames are pending in the driver. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 9b3736ea2aaf..5ac713d2ff5d 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1390,11 +1390,15 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, u16 *ssn) { struct ath_atx_tid *txtid; + struct ath_txq *txq; struct ath_node *an; u8 density; an = (struct ath_node *)sta->drv_priv; txtid = ATH_AN_2_TID(an, tid); + txq = txtid->ac->txq; + + ath_txq_lock(sc, txq); /* update ampdu factor/density, they may have changed. This may happen * in HT IBSS when a beacon with HT-info is received after the station @@ -1418,6 +1422,8 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, memset(txtid->tx_buf, 0, sizeof(txtid->tx_buf)); txtid->baw_head = txtid->baw_tail = 0; + ath_txq_unlock_complete(sc, txq); + return 0; } From 60ce314d1750fef843e9db70050e09e49f838b69 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 18 Sep 2013 21:21:35 -0500 Subject: [PATCH 146/459] rtlwifi: Align private space in rtl_priv struct The private array at the end of the rtl_priv struct is not aligned. On ARM architecture, this causes an alignment trap and is fixed by aligning that array with __align(sizeof(void *)). That should properly align that space according to the requirements of all architectures. Reported-by: Jason Andrews Tested-by: Jason Andrews Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/wifi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h index cc03e7c87cbe..703258742d28 100644 --- a/drivers/net/wireless/rtlwifi/wifi.h +++ b/drivers/net/wireless/rtlwifi/wifi.h @@ -2057,7 +2057,7 @@ struct rtl_priv { that it points to the data allocated beyond this structure like: rtl_pci_priv or rtl_usb_priv */ - u8 priv[0]; + u8 priv[0] __aligned(sizeof(void *)); }; #define rtl_priv(hw) (((struct rtl_priv *)(hw)->priv)) From b7be1522def9a9988b67afd0be999c50a96394b5 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Fri, 20 Sep 2013 19:56:45 -0700 Subject: [PATCH 147/459] mwifiex: fix PCIe hs_cfg cancel cmd timeout For pcie8897, the hs_cfg cancel command (0xe5) times out when host comes out of suspend. This is caused by an incompleted host sleep handshake between driver and firmware. Like SDIO interface, PCIe also needs to go through firmware power save events to complete the handshake for host sleep configuration. Only USB interface doesn't require power save events for hs_cfg. Cc: # 3.10+ Signed-off-by: Bing Zhao Signed-off-by: Amitkumar Karwar Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cmdevt.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index 2d761477d15e..a6c46f3b6e3a 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -1155,7 +1155,7 @@ int mwifiex_ret_802_11_hs_cfg(struct mwifiex_private *priv, uint32_t conditions = le32_to_cpu(phs_cfg->params.hs_config.conditions); if (phs_cfg->action == cpu_to_le16(HS_ACTIVATE) && - adapter->iface_type == MWIFIEX_SDIO) { + adapter->iface_type != MWIFIEX_USB) { mwifiex_hs_activated_event(priv, true); return 0; } else { @@ -1167,8 +1167,7 @@ int mwifiex_ret_802_11_hs_cfg(struct mwifiex_private *priv, } if (conditions != HS_CFG_CANCEL) { adapter->is_hs_configured = true; - if (adapter->iface_type == MWIFIEX_USB || - adapter->iface_type == MWIFIEX_PCIE) + if (adapter->iface_type == MWIFIEX_USB) mwifiex_hs_activated_event(priv, true); } else { adapter->is_hs_configured = false; From c4fb19d21b003ec99ec490ba2cb60baffabc73f3 Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Mon, 23 Sep 2013 16:00:03 -0400 Subject: [PATCH 148/459] Revert "cw1200: Don't perform SPI transfers in interrupt context" This reverts commit aec8e88c947b7017e2b4bbcb68a4bfc4a1f8ad35. This solution turned out to cause interrupt delivery problems, and rather than trying to fix this approach, it has been scrapped in favor of an alternative (and far simpler) implementation. Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville --- drivers/net/wireless/cw1200/cw1200_spi.c | 19 +++---------------- drivers/net/wireless/cw1200/fwio.c | 2 +- drivers/net/wireless/cw1200/hwbus.h | 1 - drivers/net/wireless/cw1200/hwio.c | 15 --------------- 4 files changed, 4 insertions(+), 33 deletions(-) diff --git a/drivers/net/wireless/cw1200/cw1200_spi.c b/drivers/net/wireless/cw1200/cw1200_spi.c index f5e6b489ed32..5a64ac963009 100644 --- a/drivers/net/wireless/cw1200/cw1200_spi.c +++ b/drivers/net/wireless/cw1200/cw1200_spi.c @@ -42,7 +42,6 @@ struct hwbus_priv { spinlock_t lock; /* Serialize all bus operations */ wait_queue_head_t wq; int claimed; - int irq_disabled; }; #define SDIO_TO_SPI_ADDR(addr) ((addr & 0x1f)>>2) @@ -238,8 +237,6 @@ static irqreturn_t cw1200_spi_irq_handler(int irq, void *dev_id) struct hwbus_priv *self = dev_id; if (self->core) { - disable_irq_nosync(self->func->irq); - self->irq_disabled = 1; cw1200_irq_handler(self->core); return IRQ_HANDLED; } else { @@ -273,22 +270,13 @@ exit: static int cw1200_spi_irq_unsubscribe(struct hwbus_priv *self) { + int ret = 0; + pr_debug("SW IRQ unsubscribe\n"); disable_irq_wake(self->func->irq); free_irq(self->func->irq, self); - return 0; -} - -static int cw1200_spi_irq_enable(struct hwbus_priv *self, int enable) -{ - /* Disables are handled by the interrupt handler */ - if (enable && self->irq_disabled) { - enable_irq(self->func->irq); - self->irq_disabled = 0; - } - - return 0; + return ret; } static int cw1200_spi_off(const struct cw1200_platform_data_spi *pdata) @@ -368,7 +356,6 @@ static struct hwbus_ops cw1200_spi_hwbus_ops = { .unlock = cw1200_spi_unlock, .align_size = cw1200_spi_align_size, .power_mgmt = cw1200_spi_pm, - .irq_enable = cw1200_spi_irq_enable, }; /* Probe Function to be called by SPI stack when device is discovered */ diff --git a/drivers/net/wireless/cw1200/fwio.c b/drivers/net/wireless/cw1200/fwio.c index 0b2061bbc68b..acdff0f7f952 100644 --- a/drivers/net/wireless/cw1200/fwio.c +++ b/drivers/net/wireless/cw1200/fwio.c @@ -485,7 +485,7 @@ int cw1200_load_firmware(struct cw1200_common *priv) /* Enable interrupt signalling */ priv->hwbus_ops->lock(priv->hwbus_priv); - ret = __cw1200_irq_enable(priv, 2); + ret = __cw1200_irq_enable(priv, 1); priv->hwbus_ops->unlock(priv->hwbus_priv); if (ret < 0) goto unsubscribe; diff --git a/drivers/net/wireless/cw1200/hwbus.h b/drivers/net/wireless/cw1200/hwbus.h index 51dfb3a90735..8b2fc831c3de 100644 --- a/drivers/net/wireless/cw1200/hwbus.h +++ b/drivers/net/wireless/cw1200/hwbus.h @@ -28,7 +28,6 @@ struct hwbus_ops { void (*unlock)(struct hwbus_priv *self); size_t (*align_size)(struct hwbus_priv *self, size_t size); int (*power_mgmt)(struct hwbus_priv *self, bool suspend); - int (*irq_enable)(struct hwbus_priv *self, int enable); }; #endif /* CW1200_HWBUS_H */ diff --git a/drivers/net/wireless/cw1200/hwio.c b/drivers/net/wireless/cw1200/hwio.c index 41bd7615ccaa..ff230b7aeedd 100644 --- a/drivers/net/wireless/cw1200/hwio.c +++ b/drivers/net/wireless/cw1200/hwio.c @@ -273,21 +273,6 @@ int __cw1200_irq_enable(struct cw1200_common *priv, int enable) u16 val16; int ret; - /* We need to do this hack because the SPI layer can sleep on I/O - and the general path involves I/O to the device in interrupt - context. - - However, the initial enable call needs to go to the hardware. - - We don't worry about shutdown because we do a full reset which - clears the interrupt enabled bits. - */ - if (priv->hwbus_ops->irq_enable) { - ret = priv->hwbus_ops->irq_enable(priv->hwbus_priv, enable); - if (ret || enable < 2) - return ret; - } - if (HIF_8601_SILICON == priv->hw_type) { ret = __cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32); if (ret < 0) { From 87421cb6010a2f6494938fbe0a95e1b096b3b7af Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Mon, 23 Sep 2013 16:00:04 -0400 Subject: [PATCH 149/459] cw1200: Use a threaded oneshot irq handler for cw1200_spi This supercedes the older patch ("cw1200: Don't perform SPI transfers in interrupt context") that badly attempted to fix this problem. This is a far simpler solution, which has the added benefit of actually working. Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville --- drivers/net/wireless/cw1200/cw1200_spi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/cw1200/cw1200_spi.c b/drivers/net/wireless/cw1200/cw1200_spi.c index 5a64ac963009..899cad34ccd3 100644 --- a/drivers/net/wireless/cw1200/cw1200_spi.c +++ b/drivers/net/wireless/cw1200/cw1200_spi.c @@ -250,9 +250,10 @@ static int cw1200_spi_irq_subscribe(struct hwbus_priv *self) pr_debug("SW IRQ subscribe\n"); - ret = request_any_context_irq(self->func->irq, cw1200_spi_irq_handler, - IRQF_TRIGGER_HIGH, - "cw1200_wlan_irq", self); + ret = request_threaded_irq(self->func->irq, NULL, + cw1200_spi_irq_handler, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "cw1200_wlan_irq", self); if (WARN_ON(ret < 0)) goto exit; From 1e43692cdb7cc445d6347d8a5207d9cef0c71434 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Tue, 24 Sep 2013 21:56:46 +0200 Subject: [PATCH 150/459] p54usb: add USB ID for Corega WLUSB2GTST USB adapter Added USB ID for Corega WLUSB2GTST USB adapter. Cc: Reported-by: Joerg Kalisch Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 7fa81d13b4e5..e328d3058c41 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -83,6 +83,7 @@ static struct usb_device_id p54u_table[] = { {USB_DEVICE(0x06a9, 0x000e)}, /* Westell 802.11g USB (A90-211WG-01) */ {USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */ {USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */ + {USB_DEVICE(0x07aa, 0x0020)}, /* Corega WLUSB2GTST USB */ {USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */ {USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */ {USB_DEVICE(0x083a, 0x4531)}, /* T-Com Sinus 154 data II */ From bd1c6142edce787b8ac1be15635f845aa9905333 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 24 Sep 2013 19:31:24 -0700 Subject: [PATCH 151/459] mwifiex: fix hang issue for USB chipsets Bug 60815 - Interface hangs in mwifiex_usb https://bugzilla.kernel.org/show_bug.cgi?id=60815 We have 4 bytes of interface header for packets delivered to SDIO and PCIe, but not for USB interface. In Tx AMSDU case, currently 4 bytes of garbage data is unnecessarily appended for USB packets. This sometimes leads to a firmware hang, because it may not interpret the data packet correctly. Problem is fixed by removing this redundant headroom for USB. Cc: # 3.5+ Tested-by: Dmitry Khromov Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/11n_aggr.c | 3 ++- drivers/net/wireless/mwifiex/11n_aggr.h | 2 +- drivers/net/wireless/mwifiex/wmm.c | 3 +-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/mwifiex/11n_aggr.c b/drivers/net/wireless/mwifiex/11n_aggr.c index 21c688264708..1214c587fd08 100644 --- a/drivers/net/wireless/mwifiex/11n_aggr.c +++ b/drivers/net/wireless/mwifiex/11n_aggr.c @@ -150,7 +150,7 @@ mwifiex_11n_form_amsdu_txpd(struct mwifiex_private *priv, */ int mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv, - struct mwifiex_ra_list_tbl *pra_list, int headroom, + struct mwifiex_ra_list_tbl *pra_list, int ptrindex, unsigned long ra_list_flags) __releases(&priv->wmm.ra_list_spinlock) { @@ -160,6 +160,7 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv, int pad = 0, ret; struct mwifiex_tx_param tx_param; struct txpd *ptx_pd = NULL; + int headroom = adapter->iface_type == MWIFIEX_USB ? 0 : INTF_HEADER_LEN; skb_src = skb_peek(&pra_list->skb_head); if (!skb_src) { diff --git a/drivers/net/wireless/mwifiex/11n_aggr.h b/drivers/net/wireless/mwifiex/11n_aggr.h index 900e1c62a0cc..892098d6a696 100644 --- a/drivers/net/wireless/mwifiex/11n_aggr.h +++ b/drivers/net/wireless/mwifiex/11n_aggr.h @@ -26,7 +26,7 @@ int mwifiex_11n_deaggregate_pkt(struct mwifiex_private *priv, struct sk_buff *skb); int mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv, - struct mwifiex_ra_list_tbl *ptr, int headroom, + struct mwifiex_ra_list_tbl *ptr, int ptr_index, unsigned long flags) __releases(&priv->wmm.ra_list_spinlock); diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c index 2e8f9cdea54d..95fa3599b407 100644 --- a/drivers/net/wireless/mwifiex/wmm.c +++ b/drivers/net/wireless/mwifiex/wmm.c @@ -1239,8 +1239,7 @@ mwifiex_dequeue_tx_packet(struct mwifiex_adapter *adapter) if (enable_tx_amsdu && mwifiex_is_amsdu_allowed(priv, tid) && mwifiex_is_11n_aggragation_possible(priv, ptr, adapter->tx_buf_size)) - mwifiex_11n_aggregate_pkt(priv, ptr, INTF_HEADER_LEN, - ptr_index, flags); + mwifiex_11n_aggregate_pkt(priv, ptr, ptr_index, flags); /* ra_list_spinlock has been freed in mwifiex_11n_aggregate_pkt() */ else From 346ece0b7ba2730b4d633b9e371fe55488803102 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Tue, 24 Sep 2013 19:31:25 -0700 Subject: [PATCH 152/459] mwifiex: fix NULL pointer dereference in usb suspend handler Bug 60815 - Interface hangs in mwifiex_usb https://bugzilla.kernel.org/show_bug.cgi?id=60815 [ 2.883807] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 2.883813] IP: [] pfifo_fast_enqueue+0x90/0x90 [ 2.883834] CPU: 1 PID: 3220 Comm: kworker/u8:90 Not tainted 3.11.1-monotone-l0 #6 [ 2.883834] Hardware name: Microsoft Corporation Surface with Windows 8 Pro/Surface with Windows 8 Pro, BIOS 1.03.0450 03/29/2013 On Surface Pro, suspend to ram gives a NULL pointer dereference in pfifo_fast_enqueue(). The stack trace reveals that the offending call is clearing carrier in mwifiex_usb suspend handler. Since commit 1499d9f "mwifiex: don't drop carrier flag over suspend" has removed the carrier flag handling over suspend/resume in SDIO and PCIe drivers, I'm removing it in USB driver too. This also fixes the bug for Surface Pro. Cc: # 3.5+ Tested-by: Dmitry Khromov Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/usb.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c index 2472d4b7f00e..1c70b8d09227 100644 --- a/drivers/net/wireless/mwifiex/usb.c +++ b/drivers/net/wireless/mwifiex/usb.c @@ -447,9 +447,6 @@ static int mwifiex_usb_suspend(struct usb_interface *intf, pm_message_t message) */ adapter->is_suspended = true; - for (i = 0; i < adapter->priv_num; i++) - netif_carrier_off(adapter->priv[i]->netdev); - if (atomic_read(&card->rx_cmd_urb_pending) && card->rx_cmd.urb) usb_kill_urb(card->rx_cmd.urb); @@ -509,10 +506,6 @@ static int mwifiex_usb_resume(struct usb_interface *intf) MWIFIEX_RX_CMD_BUF_SIZE); } - for (i = 0; i < adapter->priv_num; i++) - if (adapter->priv[i]->media_connected) - netif_carrier_on(adapter->priv[i]->netdev); - /* Disable Host Sleep */ if (adapter->hs_activated) mwifiex_cancel_hs(mwifiex_get_priv(adapter, From db4efbbeb457b6f9f4d8c4b090d1170d12f026e1 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 25 Sep 2013 12:11:01 +0200 Subject: [PATCH 153/459] brcmfmac: obtain platform data upon module initialization The driver uses platform_driver_probe() to obtain platform data if any. However, that function is placed in the .init section so it must be called upon driver module initialization. The problem was reported by Fenguang Wu resulting in a kernel oops because the .init section was already freed. [ 48.966342] Switched to clocksource tsc [ 48.970002] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 48.970851] BUG: unable to handle kernel paging request at ffffffff82196446 [ 48.970957] IP: [] classes_init+0x26/0x26 [ 48.970957] PGD 1e76067 PUD 1e77063 PMD f388063 PTE 8000000002196163 [ 48.970957] Oops: 0011 [#1] [ 48.970957] CPU: 0 PID: 17 Comm: kworker/0:1 Not tainted 3.11.0-rc7-00444-gc52dd7f #23 [ 48.970957] Workqueue: events brcmf_driver_init [ 48.970957] task: ffff8800001d2000 ti: ffff8800001d4000 task.ti: ffff8800001d4000 [ 48.970957] RIP: 0010:[] [] classes_init+0x26/0x26 [ 48.970957] RSP: 0000:ffff8800001d5d40 EFLAGS: 00000286 [ 48.970957] RAX: 0000000000000001 RBX: ffffffff820c5620 RCX: 0000000000000000 [ 48.970957] RDX: 0000000000000001 RSI: ffffffff816f7380 RDI: ffffffff820c56c0 [ 48.970957] RBP: ffff8800001d5d50 R08: ffff8800001d2508 R09: 0000000000000002 [ 48.970957] R10: 0000000000000000 R11: 0001f7ce298c5620 R12: ffff8800001c76b0 [ 48.970957] R13: ffffffff81e91d40 R14: 0000000000000000 R15: ffff88000e0ce300 [ 48.970957] FS: 0000000000000000(0000) GS:ffffffff81e84000(0000) knlGS:0000000000000000 [ 48.970957] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 48.970957] CR2: ffffffff82196446 CR3: 0000000001e75000 CR4: 00000000000006b0 [ 48.970957] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.970957] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 [ 48.970957] Stack: [ 48.970957] ffffffff816f7df8 ffffffff820c5620 ffff8800001d5d60 ffffffff816eeec9 [ 48.970957] ffff8800001d5de0 ffffffff81073dc5 ffffffff81073d68 ffff8800001d5db8 [ 48.970957] 0000000000000086 ffffffff820c5620 ffffffff824f7fd0 0000000000000000 [ 48.970957] Call Trace: [ 48.970957] [] ? brcmf_sdio_init+0x18/0x70 [ 48.970957] [] brcmf_driver_init+0x9/0x10 [ 48.970957] [] process_one_work+0x1d5/0x480 [ 48.970957] [] ? process_one_work+0x178/0x480 [ 48.970957] [] worker_thread+0x118/0x3a0 [ 48.970957] [] ? process_one_work+0x480/0x480 [ 48.970957] [] kthread+0xe7/0xf0 [ 48.970957] [] ? finish_task_switch.constprop.57+0x37/0xd0 [ 48.970957] [] ? __kthread_parkme+0x80/0x80 [ 48.970957] [] ret_from_fork+0x7a/0xb0 [ 48.970957] [] ? __kthread_parkme+0x80/0x80 [ 48.970957] Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc [ 48.970957] RIP [] classes_init+0x26/0x26 [ 48.970957] RSP [ 48.970957] CR2: ffffffff82196446 [ 48.970957] ---[ end trace 62980817cd525f14 ]--- Cc: # 3.10.x, 3.11.x Reported-by: Fengguang Wu Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Tested-by: Fengguang Wu Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../brcm80211/brcmfmac/bcmsdh_sdmmc.c | 28 +++++++++---------- .../net/wireless/brcm80211/brcmfmac/dhd_bus.h | 3 +- .../wireless/brcm80211/brcmfmac/dhd_linux.c | 14 ++++++---- drivers/net/wireless/brcm80211/brcmfmac/usb.c | 2 +- 4 files changed, 24 insertions(+), 23 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index 64f4a2bc8dde..c3462b75bd08 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -464,8 +464,6 @@ static struct sdio_driver brcmf_sdmmc_driver = { static int brcmf_sdio_pd_probe(struct platform_device *pdev) { - int ret; - brcmf_dbg(SDIO, "Enter\n"); brcmfmac_sdio_pdata = pdev->dev.platform_data; @@ -473,11 +471,7 @@ static int brcmf_sdio_pd_probe(struct platform_device *pdev) if (brcmfmac_sdio_pdata->power_on) brcmfmac_sdio_pdata->power_on(); - ret = sdio_register_driver(&brcmf_sdmmc_driver); - if (ret) - brcmf_err("sdio_register_driver failed: %d\n", ret); - - return ret; + return 0; } static int brcmf_sdio_pd_remove(struct platform_device *pdev) @@ -500,6 +494,15 @@ static struct platform_driver brcmf_sdio_pd = { } }; +void brcmf_sdio_register(void) +{ + int ret; + + ret = sdio_register_driver(&brcmf_sdmmc_driver); + if (ret) + brcmf_err("sdio_register_driver failed: %d\n", ret); +} + void brcmf_sdio_exit(void) { brcmf_dbg(SDIO, "Enter\n"); @@ -510,18 +513,13 @@ void brcmf_sdio_exit(void) sdio_unregister_driver(&brcmf_sdmmc_driver); } -void brcmf_sdio_init(void) +void __init brcmf_sdio_init(void) { int ret; brcmf_dbg(SDIO, "Enter\n"); ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe); - if (ret == -ENODEV) { - brcmf_dbg(SDIO, "No platform data available, registering without.\n"); - ret = sdio_register_driver(&brcmf_sdmmc_driver); - } - - if (ret) - brcmf_err("driver registration failed: %d\n", ret); + if (ret == -ENODEV) + brcmf_dbg(SDIO, "No platform data available.\n"); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index f7c1985844e4..74156f84180c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -156,10 +156,11 @@ extern int brcmf_bus_start(struct device *dev); #ifdef CONFIG_BRCMFMAC_SDIO extern void brcmf_sdio_exit(void); extern void brcmf_sdio_init(void); +extern void brcmf_sdio_register(void); #endif #ifdef CONFIG_BRCMFMAC_USB extern void brcmf_usb_exit(void); -extern void brcmf_usb_init(void); +extern void brcmf_usb_register(void); #endif #endif /* _BRCMF_BUS_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index e067aec1fbf1..40e7f854e10f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -1231,21 +1231,23 @@ u32 brcmf_get_chip_info(struct brcmf_if *ifp) return bus->chip << 4 | bus->chiprev; } -static void brcmf_driver_init(struct work_struct *work) +static void brcmf_driver_register(struct work_struct *work) { - brcmf_debugfs_init(); - #ifdef CONFIG_BRCMFMAC_SDIO - brcmf_sdio_init(); + brcmf_sdio_register(); #endif #ifdef CONFIG_BRCMFMAC_USB - brcmf_usb_init(); + brcmf_usb_register(); #endif } -static DECLARE_WORK(brcmf_driver_work, brcmf_driver_init); +static DECLARE_WORK(brcmf_driver_work, brcmf_driver_register); static int __init brcmfmac_module_init(void) { + brcmf_debugfs_init(); +#ifdef CONFIG_BRCMFMAC_SDIO + brcmf_sdio_init(); +#endif if (!schedule_work(&brcmf_driver_work)) return -EBUSY; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 39e01a7c8556..f4aea47e0730 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -1539,7 +1539,7 @@ void brcmf_usb_exit(void) brcmf_release_fw(&fw_image_list); } -void brcmf_usb_init(void) +void brcmf_usb_register(void) { brcmf_dbg(USB, "Enter\n"); INIT_LIST_HEAD(&fw_image_list); From 2bedea8f26c92e2610f2f67889144990749461e0 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 25 Sep 2013 12:11:02 +0200 Subject: [PATCH 154/459] bcma: make bcma_core_pci_{up,down}() callable from atomic context This patch removes the bcma_core_pci_power_save() call from the bcma_core_pci_{up,down}() functions as it tries to schedule thus requiring to call them from non-atomic context. The function bcma_core_pci_power_save() is now exported so the calling module can explicitly use it in non-atomic context. This fixes the 'scheduling while atomic' issue reported by Tod Jackson and Joe Perches. [ 13.210710] BUG: scheduling while atomic: dhcpcd/1800/0x00000202 [ 13.210718] Modules linked in: brcmsmac nouveau coretemp kvm_intel kvm cordic brcmutil bcma dell_wmi atl1c ttm mxm_wmi wmi [ 13.210756] CPU: 2 PID: 1800 Comm: dhcpcd Not tainted 3.11.0-wl #1 [ 13.210762] Hardware name: Alienware M11x R2/M11x R2, BIOS A04 11/23/2010 [ 13.210767] ffff880177c92c40 ffff880170fd1948 ffffffff8169af5b 0000000000000007 [ 13.210777] ffff880170fd1ab0 ffff880170fd1958 ffffffff81697ee2 ffff880170fd19d8 [ 13.210785] ffffffff816a19f5 00000000000f4240 000000000000d080 ffff880170fd1fd8 [ 13.210794] Call Trace: [ 13.210813] [] dump_stack+0x4f/0x84 [ 13.210826] [] __schedule_bug+0x43/0x51 [ 13.210837] [] __schedule+0x6e5/0x810 [ 13.210845] [] schedule+0x24/0x70 [ 13.210855] [] schedule_hrtimeout_range_clock+0x10c/0x150 [ 13.210867] [] ? update_rmtp+0x60/0x60 [ 13.210877] [] ? hrtimer_start_range_ns+0xf/0x20 [ 13.210887] [] schedule_hrtimeout_range+0xe/0x10 [ 13.210897] [] usleep_range+0x3b/0x40 [ 13.210910] [] bcma_pcie_mdio_set_phy.isra.3+0x4f/0x80 [bcma] [ 13.210921] [] bcma_pcie_mdio_write.isra.4+0xbf/0xd0 [bcma] [ 13.210932] [] bcma_pcie_mdio_writeread.isra.6.constprop.13+0x18/0x30 [bcma] [ 13.210942] [] bcma_core_pci_power_save+0x3e/0x80 [bcma] [ 13.210953] [] bcma_core_pci_up+0x2d/0x60 [bcma] [ 13.210975] [] brcms_c_up+0xfc/0x430 [brcmsmac] [ 13.210989] [] brcms_up+0x1d/0x20 [brcmsmac] [ 13.211003] [] brcms_ops_start+0x298/0x340 [brcmsmac] [ 13.211020] [] ? cfg80211_netdev_notifier_call+0xd2/0x5f0 [ 13.211030] [] ? packet_notifier+0xad/0x1d0 [ 13.211064] [] ieee80211_do_open+0x325/0xf80 [ 13.211076] [] ? __raw_notifier_call_chain+0x9/0x10 [ 13.211086] [] ieee80211_open+0x71/0x80 [ 13.211101] [] __dev_open+0x87/0xe0 [ 13.211109] [] __dev_change_flags+0x9c/0x180 [ 13.211117] [] dev_change_flags+0x23/0x70 [ 13.211127] [] devinet_ioctl+0x5b8/0x6a0 [ 13.211136] [] inet_ioctl+0x75/0x90 [ 13.211147] [] sock_do_ioctl+0x2b/0x70 [ 13.211155] [] sock_ioctl+0x71/0x2a0 [ 13.211169] [] do_vfs_ioctl+0x87/0x520 [ 13.211180] [] ? ____fput+0x9/0x10 [ 13.211198] [] ? task_work_run+0x9c/0xd0 [ 13.211202] [] SyS_ioctl+0x91/0xb0 [ 13.211208] [] system_call_fastpath+0x16/0x1b [ 13.211217] NOHZ: local_softirq_pending 202 The issue was introduced in v3.11 kernel by following commit: commit aa51e598d04c6acf5477934cd6383f5a17ce9029 Author: Hauke Mehrtens Date: Sat Aug 24 00:32:31 2013 +0200 brcmsmac: use bcma PCIe up and down functions replace the calls to bcma_core_pci_extend_L1timer() by calls to the newly introduced bcma_core_pci_ip() and bcma_core_pci_down() Signed-off-by: Hauke Mehrtens Cc: Arend van Spriel Signed-off-by: John W. Linville This fix has been discussed with Hauke Mehrtens [1] selection option 3) and is intended for v3.12. Ref: [1] http://mid.gmane.org/5239B12D.3040206@hauke-m.de Cc: # 3.11.x Cc: Tod Jackson Cc: Joe Perches Cc: Rafal Milecki Cc: Hauke Mehrtens Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/bcma/driver_pci.c | 49 +++++++++++++++------------- include/linux/bcma/bcma_driver_pci.h | 1 + 2 files changed, 27 insertions(+), 23 deletions(-) diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c index c9fd6943ce45..50329d1057ed 100644 --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c @@ -210,25 +210,6 @@ static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc) } } -static void bcma_core_pci_power_save(struct bcma_drv_pci *pc, bool up) -{ - u16 data; - - if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { - data = up ? 0x74 : 0x7C; - bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, - BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); - bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, - BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); - } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { - data = up ? 0x75 : 0x7D; - bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, - BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); - bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, - BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); - } -} - /************************************************** * Init. **************************************************/ @@ -255,6 +236,32 @@ void bcma_core_pci_init(struct bcma_drv_pci *pc) bcma_core_pci_clientmode_init(pc); } +void bcma_core_pci_power_save(struct bcma_bus *bus, bool up) +{ + struct bcma_drv_pci *pc; + u16 data; + + if (bus->hosttype != BCMA_HOSTTYPE_PCI) + return; + + pc = &bus->drv_pci[0]; + + if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { + data = up ? 0x74 : 0x7C; + bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, + BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); + bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, + BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); + } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { + data = up ? 0x75 : 0x7D; + bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, + BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); + bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, + BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); + } +} +EXPORT_SYMBOL_GPL(bcma_core_pci_power_save); + int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable) { @@ -310,8 +317,6 @@ void bcma_core_pci_up(struct bcma_bus *bus) pc = &bus->drv_pci[0]; - bcma_core_pci_power_save(pc, true); - bcma_core_pci_extend_L1timer(pc, true); } EXPORT_SYMBOL_GPL(bcma_core_pci_up); @@ -326,7 +331,5 @@ void bcma_core_pci_down(struct bcma_bus *bus) pc = &bus->drv_pci[0]; bcma_core_pci_extend_L1timer(pc, false); - - bcma_core_pci_power_save(pc, false); } EXPORT_SYMBOL_GPL(bcma_core_pci_down); diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h index d66033f418c9..0333e605ea0d 100644 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -242,6 +242,7 @@ extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable); extern void bcma_core_pci_up(struct bcma_bus *bus); extern void bcma_core_pci_down(struct bcma_bus *bus); +extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up); extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); From c7515d2365a6b8a018950198ebe1f5be793cd4bb Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 25 Sep 2013 12:11:03 +0200 Subject: [PATCH 155/459] brcmsmac: call bcma_core_pci_power_save() from non-atomic context This patch adds explicit call to bcma_core_pci_power_save() from a non-atomic context resolving 'scheduling while atomic' issue. [ 13.224317] BUG: scheduling while atomic: dhcpcd/1800/0x00000202 [ 13.224322] Modules linked in: brcmsmac nouveau coretemp kvm_intel kvm cordic brcmutil bcma dell_wmi atl1c ttm mxm_wmi wmi [ 13.224354] CPU: 0 PID: 1800 Comm: dhcpcd Tainted: G W 3.11.0-wl #1 [ 13.224359] Hardware name: Alienware M11x R2/M11x R2, BIOS A04 11/23/2010 [ 13.224363] ffff880177c12c40 ffff880170fd1968 ffffffff8169af5b 0000000000000007 [ 13.224374] ffff880170fd1ad0 ffff880170fd1978 ffffffff81697ee2 ffff880170fd19f8 [ 13.224383] ffffffff816a19f5 00000000000f4240 000000000000d080 ffff880170fd1fd8 [ 13.224391] Call Trace: [ 13.224399] [] dump_stack+0x4f/0x84 [ 13.224403] [] __schedule_bug+0x43/0x51 [ 13.224409] [] __schedule+0x6e5/0x810 [ 13.224412] [] schedule+0x24/0x70 [ 13.224416] [] schedule_hrtimeout_range_clock+0x10c/0x150 [ 13.224420] [] ? update_rmtp+0x60/0x60 [ 13.224424] [] ? hrtimer_start_range_ns+0xf/0x20 [ 13.224429] [] schedule_hrtimeout_range+0xe/0x10 [ 13.224432] [] usleep_range+0x3b/0x40 [ 13.224437] [] bcma_pcie_mdio_read.isra.5+0x8a/0x100 [bcma] [ 13.224442] [] bcma_pcie_mdio_writeread.isra.6.constprop.13+0x25/0x30 [bcma] [ 13.224448] [] bcma_core_pci_power_save+0x49/0x80 [bcma] [ 13.224452] [] bcma_core_pci_up+0x2d/0x60 [bcma] [ 13.224460] [] brcms_c_up+0xfc/0x430 [brcmsmac] [ 13.224467] [] brcms_up+0x1d/0x20 [brcmsmac] [ 13.224473] [] brcms_ops_start+0x298/0x340 [brcmsmac] [ 13.224478] [] ? cfg80211_netdev_notifier_call+0xd2/0x5f0 [ 13.224483] [] ? packet_notifier+0xad/0x1d0 [ 13.224487] [] ieee80211_do_open+0x325/0xf80 [ 13.224491] [] ? __raw_notifier_call_chain+0x9/0x10 [ 13.224495] [] ieee80211_open+0x71/0x80 [ 13.224498] [] __dev_open+0x87/0xe0 [ 13.224502] [] __dev_change_flags+0x9c/0x180 [ 13.224505] [] dev_change_flags+0x23/0x70 [ 13.224509] [] devinet_ioctl+0x5b8/0x6a0 [ 13.224512] [] inet_ioctl+0x75/0x90 [ 13.224516] [] sock_do_ioctl+0x2b/0x70 [ 13.224519] [] sock_ioctl+0x71/0x2a0 [ 13.224523] [] do_vfs_ioctl+0x87/0x520 [ 13.224528] [] ? ____fput+0x9/0x10 [ 13.224533] [] ? task_work_run+0x9c/0xd0 [ 13.224537] [] SyS_ioctl+0x91/0xb0 [ 13.224541] [] system_call_fastpath+0x16/0x1b Cc: # 3.11.x Cc: Tod Jackson Cc: Joe Perches Cc: Rafal Milecki Cc: Hauke Mehrtens Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 3a6544710c8a..edc5d105ff98 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -457,6 +457,8 @@ static int brcms_ops_start(struct ieee80211_hw *hw) if (err != 0) brcms_err(wl->wlc->hw->d11core, "%s: brcms_up() returned %d\n", __func__, err); + + bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, true); return err; } @@ -479,6 +481,8 @@ static void brcms_ops_stop(struct ieee80211_hw *hw) return; } + bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, false); + /* put driver in down state */ spin_lock_bh(&wl->lock); brcms_down(wl); From ad1260e9fbf768d6bed227d9604ebee76a84aae3 Mon Sep 17 00:00:00 2001 From: Ramneek Mehresh Date: Mon, 16 Sep 2013 15:11:33 +0530 Subject: [PATCH 156/459] fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy For controller versions greater than 1.6, setting ULPI_PHY_CLK_SEL bit when USB_EN bit is already set causes instability issues with PHY_CLK_VLD bit. So USB_EN is set only for IP controller version below 1.6 before setting ULPI_PHY_CLK_SEL bit Signed-off-by: Ramneek Mehresh Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-fsl.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 4449f565d6c6..d3166e693dcb 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -130,7 +130,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, } /* Enable USB controller, 83xx or 8536 */ - if (pdata->have_sysif_regs) + if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6) setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4); /* Don't need to set host mode here. It will be done by tdi_reset() */ @@ -232,15 +232,9 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, case FSL_USB2_PHY_ULPI: if (pdata->have_sysif_regs && pdata->controller_ver) { /* controller version 1.6 or above */ + clrbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); setbits32(non_ehci + FSL_SOC_USB_CTRL, - ULPI_PHY_CLK_SEL); - /* - * Due to controller issue of PHY_CLK_VALID in ULPI - * mode, we set USB_CTRL_USB_EN before checking - * PHY_CLK_VALID, otherwise PHY_CLK_VALID doesn't work. - */ - clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL, - UTMI_PHY_EN, USB_CTRL_USB_EN); + ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN); } portsc |= PORT_PTS_ULPI; break; From 2332575ef10a1bcf5ca485a6bf043831be11c7a0 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 31 Aug 2013 09:15:44 +0200 Subject: [PATCH 157/459] tty: ar933x_uart: move devicetree binding documentation Commit 'tty: ar933x_uart: add device tree support and binding documentation' introduced a new doc in bindins/tty/serial. According to a recent thread [1] on the linux-serial list, the binding documentation of serial drivers should be added into bindings/serial. Move the documentation of qca,ar9330-uart to the correct place. 1. http://marc.info/?l=linux-serial&m=137771295411517 Cc: devicetree@vger.kernel.org Signed-off-by: Gabor Juhos Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/{tty => }/serial/qca,ar9330-uart.txt | 0 1 file changed, 0 insertions(+), 0 deletions(-) rename Documentation/devicetree/bindings/{tty => }/serial/qca,ar9330-uart.txt (100%) diff --git a/Documentation/devicetree/bindings/tty/serial/qca,ar9330-uart.txt b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt similarity index 100% rename from Documentation/devicetree/bindings/tty/serial/qca,ar9330-uart.txt rename to Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt From 207070f5221e2a901d56a49df9cde47d9b716cd7 Mon Sep 17 00:00:00 2001 From: Roger Luethi Date: Sat, 21 Sep 2013 14:24:11 +0200 Subject: [PATCH 158/459] via-rhine: fix VLAN priority field (PCP, IEEE 802.1p) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Outgoing packets sent by via-rhine have their VLAN PCP field off by one (when hardware acceleration is enabled). The TX descriptor expects only VID and PCP (without a CFI/DEI bit). Peter Boström noticed and reported the bug. Signed-off-by: Roger Luethi Cc: Peter Boström Signed-off-by: David S. Miller --- drivers/net/ethernet/via/via-rhine.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c index c8f088ab5fdf..bdf697b184ae 100644 --- a/drivers/net/ethernet/via/via-rhine.c +++ b/drivers/net/ethernet/via/via-rhine.c @@ -32,7 +32,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #define DRV_NAME "via-rhine" -#define DRV_VERSION "1.5.0" +#define DRV_VERSION "1.5.1" #define DRV_RELDATE "2010-10-09" #include @@ -1704,7 +1704,12 @@ static netdev_tx_t rhine_start_tx(struct sk_buff *skb, cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN)); if (unlikely(vlan_tx_tag_present(skb))) { - rp->tx_ring[entry].tx_status = cpu_to_le32((vlan_tx_tag_get(skb)) << 16); + u16 vid_pcp = vlan_tx_tag_get(skb); + + /* drop CFI/DEI bit, register needs VID and PCP */ + vid_pcp = (vid_pcp & VLAN_VID_MASK) | + ((vid_pcp & VLAN_PRIO_MASK) >> 1); + rp->tx_ring[entry].tx_status = cpu_to_le32((vid_pcp) << 16); /* request tagging */ rp->tx_ring[entry].desc_length |= cpu_to_le32(0x020000); } From 1aee351a739153529fbb98ee461777b2abd5e1c9 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 2 Sep 2013 13:29:45 +0300 Subject: [PATCH 159/459] mei: make me client counters less error prone 1. u8 counters are prone to hard to detect overflow: make them unsigned long to match bit_ functions argument type 2. don't check me_clients_num for negativity, it is unsigned. 3. init all the me client counters from one place Cc: # 3.9+ Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hbm.c | 10 ++++++---- drivers/misc/mei/mei_dev.h | 6 +++--- 2 files changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index 6127ab64bb39..0a0448326e9d 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -35,11 +35,15 @@ static void mei_hbm_me_cl_allocate(struct mei_device *dev) struct mei_me_client *clients; int b; + dev->me_clients_num = 0; + dev->me_client_presentation_num = 0; + dev->me_client_index = 0; + /* count how many ME clients we have */ for_each_set_bit(b, dev->me_clients_map, MEI_CLIENTS_MAX) dev->me_clients_num++; - if (dev->me_clients_num <= 0) + if (dev->me_clients_num == 0) return; kfree(dev->me_clients); @@ -221,7 +225,7 @@ static int mei_hbm_prop_req(struct mei_device *dev) struct hbm_props_request *prop_req; const size_t len = sizeof(struct hbm_props_request); unsigned long next_client_index; - u8 client_num; + unsigned long client_num; client_num = dev->me_client_presentation_num; @@ -677,8 +681,6 @@ void mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr) if (dev->dev_state == MEI_DEV_INIT_CLIENTS && dev->hbm_state == MEI_HBM_ENUM_CLIENTS) { dev->init_clients_timer = 0; - dev->me_client_presentation_num = 0; - dev->me_client_index = 0; mei_hbm_me_cl_allocate(dev); dev->hbm_state = MEI_HBM_CLIENT_PROPERTIES; diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index 7b918b2fb894..456b322013e2 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -396,9 +396,9 @@ struct mei_device { struct mei_me_client *me_clients; /* Note: memory has to be allocated */ DECLARE_BITMAP(me_clients_map, MEI_CLIENTS_MAX); DECLARE_BITMAP(host_clients_map, MEI_CLIENTS_MAX); - u8 me_clients_num; - u8 me_client_presentation_num; - u8 me_client_index; + unsigned long me_clients_num; + unsigned long me_client_presentation_num; + unsigned long me_client_index; struct mei_cl wd_cl; enum mei_wd_states wd_state; From e2b31644e999e8bfe3efce880fb32840299abf41 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 2 Sep 2013 13:29:46 +0300 Subject: [PATCH 160/459] mei: bus: stop wait for read during cl state transition Bus layer omitted check for client state transition while waiting for read completion The client state transition may occur for example as result of firmware initiated reset Add mei_cl_is_transitioning wrapper to reduce the code repetition.: Cc: # 3.9+ Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus.c | 5 ++++- drivers/misc/mei/client.h | 6 ++++++ drivers/misc/mei/main.c | 11 ++++------- 3 files changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 6d0282c08a06..cd2033cd7120 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -297,10 +297,13 @@ int __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length) if (cl->reading_state != MEI_READ_COMPLETE && !waitqueue_active(&cl->rx_wait)) { + mutex_unlock(&dev->device_lock); if (wait_event_interruptible(cl->rx_wait, - (MEI_READ_COMPLETE == cl->reading_state))) { + cl->reading_state == MEI_READ_COMPLETE || + mei_cl_is_transitioning(cl))) { + if (signal_pending(current)) return -EINTR; return -ERESTARTSYS; diff --git a/drivers/misc/mei/client.h b/drivers/misc/mei/client.h index 9eb031e92070..892cc4207fa2 100644 --- a/drivers/misc/mei/client.h +++ b/drivers/misc/mei/client.h @@ -90,6 +90,12 @@ static inline bool mei_cl_is_connected(struct mei_cl *cl) cl->dev->dev_state == MEI_DEV_ENABLED && cl->state == MEI_FILE_CONNECTED); } +static inline bool mei_cl_is_transitioning(struct mei_cl *cl) +{ + return (MEI_FILE_INITIALIZING == cl->state || + MEI_FILE_DISCONNECTED == cl->state || + MEI_FILE_DISCONNECTING == cl->state); +} bool mei_cl_is_other_connecting(struct mei_cl *cl); int mei_cl_disconnect(struct mei_cl *cl); diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index 173ff095be0d..cabeddd66c1f 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -249,19 +249,16 @@ static ssize_t mei_read(struct file *file, char __user *ubuf, mutex_unlock(&dev->device_lock); if (wait_event_interruptible(cl->rx_wait, - (MEI_READ_COMPLETE == cl->reading_state || - MEI_FILE_INITIALIZING == cl->state || - MEI_FILE_DISCONNECTED == cl->state || - MEI_FILE_DISCONNECTING == cl->state))) { + MEI_READ_COMPLETE == cl->reading_state || + mei_cl_is_transitioning(cl))) { + if (signal_pending(current)) return -EINTR; return -ERESTARTSYS; } mutex_lock(&dev->device_lock); - if (MEI_FILE_INITIALIZING == cl->state || - MEI_FILE_DISCONNECTED == cl->state || - MEI_FILE_DISCONNECTING == cl->state) { + if (mei_cl_is_transitioning(cl)) { rets = -EBUSY; goto out; } From 4a704575cc1afb3b848f096778fa9b8d7b3d5813 Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Mon, 2 Sep 2013 13:29:47 +0300 Subject: [PATCH 161/459] mei: cancel stall timers in mei_reset Unset init_clients_timer and amthif_stall_timers in mei_reset in order to cancel timer ticking and hence avoid recursive reset calls. Cc: # 3.9+ Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/amthif.c | 1 + drivers/misc/mei/init.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/drivers/misc/mei/amthif.c b/drivers/misc/mei/amthif.c index d0fdc134068a..f6ff711aa5bb 100644 --- a/drivers/misc/mei/amthif.c +++ b/drivers/misc/mei/amthif.c @@ -57,6 +57,7 @@ void mei_amthif_reset_params(struct mei_device *dev) dev->iamthif_ioctl = false; dev->iamthif_state = MEI_IAMTHIF_IDLE; dev->iamthif_timer = 0; + dev->iamthif_stall_timer = 0; } /** diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c index 92c73118b13c..6197018e2f16 100644 --- a/drivers/misc/mei/init.c +++ b/drivers/misc/mei/init.c @@ -175,6 +175,9 @@ void mei_reset(struct mei_device *dev, int interrupts_enabled) memset(&dev->wr_ext_msg, 0, sizeof(dev->wr_ext_msg)); } + /* we're already in reset, cancel the init timer */ + dev->init_clients_timer = 0; + dev->me_clients_num = 0; dev->rd_msg_hdr = 0; dev->wd_pending = false; From 3a4916050ba2e0f1d114ef540abdf02b2b173e61 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Fri, 6 Sep 2013 11:49:56 -0700 Subject: [PATCH 162/459] Drivers: hv: util: Correctly support ws2008R2 and earlier The current code does not correctly negotiate the version numbers for the util driver when hosted on earlier hosts. The version numbers presented by this driver were not compatible with the version numbers supported by Windows Server 2008. Fix this problem. I would like to thank Olaf Hering (ohering@suse.com) for identifying the problem. Reported-by: Olaf Hering Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_kvp.c | 38 ++++++++++++++------- drivers/hv/hv_snapshot.c | 6 ++-- drivers/hv/hv_util.c | 71 ++++++++++++++++++++++++++++++---------- include/linux/hyperv.h | 7 ++-- 4 files changed, 88 insertions(+), 34 deletions(-) diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c index 28b03325b872..09988b289622 100644 --- a/drivers/hv/hv_kvp.c +++ b/drivers/hv/hv_kvp.c @@ -32,13 +32,17 @@ /* * Pre win8 version numbers used in ws2008 and ws 2008 r2 (win7) */ +#define WS2008_SRV_MAJOR 1 +#define WS2008_SRV_MINOR 0 +#define WS2008_SRV_VERSION (WS2008_SRV_MAJOR << 16 | WS2008_SRV_MINOR) + #define WIN7_SRV_MAJOR 3 #define WIN7_SRV_MINOR 0 -#define WIN7_SRV_MAJOR_MINOR (WIN7_SRV_MAJOR << 16 | WIN7_SRV_MINOR) +#define WIN7_SRV_VERSION (WIN7_SRV_MAJOR << 16 | WIN7_SRV_MINOR) #define WIN8_SRV_MAJOR 4 #define WIN8_SRV_MINOR 0 -#define WIN8_SRV_MAJOR_MINOR (WIN8_SRV_MAJOR << 16 | WIN8_SRV_MINOR) +#define WIN8_SRV_VERSION (WIN8_SRV_MAJOR << 16 | WIN8_SRV_MINOR) /* * Global state maintained for transaction that is being processed. @@ -587,6 +591,8 @@ void hv_kvp_onchannelcallback(void *context) struct icmsg_hdr *icmsghdrp; struct icmsg_negotiate *negop = NULL; + int util_fw_version; + int kvp_srv_version; if (kvp_transaction.active) { /* @@ -606,17 +612,26 @@ void hv_kvp_onchannelcallback(void *context) if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) { /* - * We start with win8 version and if the host cannot - * support that we use the previous version. + * Based on the host, select appropriate + * framework and service versions we will + * negotiate. */ - if (vmbus_prep_negotiate_resp(icmsghdrp, negop, - recv_buffer, UTIL_FW_MAJOR_MINOR, - WIN8_SRV_MAJOR_MINOR)) - goto done; - + switch (vmbus_proto_version) { + case (VERSION_WS2008): + util_fw_version = UTIL_WS2K8_FW_VERSION; + kvp_srv_version = WS2008_SRV_VERSION; + break; + case (VERSION_WIN7): + util_fw_version = UTIL_FW_VERSION; + kvp_srv_version = WIN7_SRV_VERSION; + break; + default: + util_fw_version = UTIL_FW_VERSION; + kvp_srv_version = WIN8_SRV_VERSION; + } vmbus_prep_negotiate_resp(icmsghdrp, negop, - recv_buffer, UTIL_FW_MAJOR_MINOR, - WIN7_SRV_MAJOR_MINOR); + recv_buffer, util_fw_version, + kvp_srv_version); } else { kvp_msg = (struct hv_kvp_msg *)&recv_buffer[ @@ -649,7 +664,6 @@ void hv_kvp_onchannelcallback(void *context) return; } -done: icmsghdrp->icflags = ICMSGHDRFLAG_TRANSACTION | ICMSGHDRFLAG_RESPONSE; diff --git a/drivers/hv/hv_snapshot.c b/drivers/hv/hv_snapshot.c index e4572f3f2834..0c3546224376 100644 --- a/drivers/hv/hv_snapshot.c +++ b/drivers/hv/hv_snapshot.c @@ -26,7 +26,7 @@ #define VSS_MAJOR 5 #define VSS_MINOR 0 -#define VSS_MAJOR_MINOR (VSS_MAJOR << 16 | VSS_MINOR) +#define VSS_VERSION (VSS_MAJOR << 16 | VSS_MINOR) @@ -190,8 +190,8 @@ void hv_vss_onchannelcallback(void *context) if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) { vmbus_prep_negotiate_resp(icmsghdrp, negop, - recv_buffer, UTIL_FW_MAJOR_MINOR, - VSS_MAJOR_MINOR); + recv_buffer, UTIL_FW_VERSION, + VSS_VERSION); } else { vss_msg = (struct hv_vss_msg *)&recv_buffer[ sizeof(struct vmbuspipe_hdr) + diff --git a/drivers/hv/hv_util.c b/drivers/hv/hv_util.c index cb82233541b1..273e3ddb3a20 100644 --- a/drivers/hv/hv_util.c +++ b/drivers/hv/hv_util.c @@ -28,17 +28,32 @@ #include #include -#define SHUTDOWN_MAJOR 3 -#define SHUTDOWN_MINOR 0 -#define SHUTDOWN_MAJOR_MINOR (SHUTDOWN_MAJOR << 16 | SHUTDOWN_MINOR) -#define TIMESYNCH_MAJOR 3 -#define TIMESYNCH_MINOR 0 -#define TIMESYNCH_MAJOR_MINOR (TIMESYNCH_MAJOR << 16 | TIMESYNCH_MINOR) +#define SD_MAJOR 3 +#define SD_MINOR 0 +#define SD_VERSION (SD_MAJOR << 16 | SD_MINOR) -#define HEARTBEAT_MAJOR 3 -#define HEARTBEAT_MINOR 0 -#define HEARTBEAT_MAJOR_MINOR (HEARTBEAT_MAJOR << 16 | HEARTBEAT_MINOR) +#define SD_WS2008_MAJOR 1 +#define SD_WS2008_VERSION (SD_WS2008_MAJOR << 16 | SD_MINOR) + +#define TS_MAJOR 3 +#define TS_MINOR 0 +#define TS_VERSION (TS_MAJOR << 16 | TS_MINOR) + +#define TS_WS2008_MAJOR 1 +#define TS_WS2008_VERSION (TS_WS2008_MAJOR << 16 | TS_MINOR) + +#define HB_MAJOR 3 +#define HB_MINOR 0 +#define HB_VERSION (HB_MAJOR << 16 | HB_MINOR) + +#define HB_WS2008_MAJOR 1 +#define HB_WS2008_VERSION (HB_WS2008_MAJOR << 16 | HB_MINOR) + +static int sd_srv_version; +static int ts_srv_version; +static int hb_srv_version; +static int util_fw_version; static void shutdown_onchannelcallback(void *context); static struct hv_util_service util_shutdown = { @@ -99,8 +114,8 @@ static void shutdown_onchannelcallback(void *context) if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) { vmbus_prep_negotiate_resp(icmsghdrp, negop, - shut_txf_buf, UTIL_FW_MAJOR_MINOR, - SHUTDOWN_MAJOR_MINOR); + shut_txf_buf, util_fw_version, + sd_srv_version); } else { shutdown_msg = (struct shutdown_msg_data *)&shut_txf_buf[ @@ -216,6 +231,7 @@ static void timesync_onchannelcallback(void *context) struct icmsg_hdr *icmsghdrp; struct ictimesync_data *timedatap; u8 *time_txf_buf = util_timesynch.recv_buffer; + struct icmsg_negotiate *negop = NULL; vmbus_recvpacket(channel, time_txf_buf, PAGE_SIZE, &recvlen, &requestid); @@ -225,9 +241,10 @@ static void timesync_onchannelcallback(void *context) sizeof(struct vmbuspipe_hdr)]; if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) { - vmbus_prep_negotiate_resp(icmsghdrp, NULL, time_txf_buf, - UTIL_FW_MAJOR_MINOR, - TIMESYNCH_MAJOR_MINOR); + vmbus_prep_negotiate_resp(icmsghdrp, negop, + time_txf_buf, + util_fw_version, + ts_srv_version); } else { timedatap = (struct ictimesync_data *)&time_txf_buf[ sizeof(struct vmbuspipe_hdr) + @@ -257,6 +274,7 @@ static void heartbeat_onchannelcallback(void *context) struct icmsg_hdr *icmsghdrp; struct heartbeat_msg_data *heartbeat_msg; u8 *hbeat_txf_buf = util_heartbeat.recv_buffer; + struct icmsg_negotiate *negop = NULL; vmbus_recvpacket(channel, hbeat_txf_buf, PAGE_SIZE, &recvlen, &requestid); @@ -266,9 +284,9 @@ static void heartbeat_onchannelcallback(void *context) sizeof(struct vmbuspipe_hdr)]; if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) { - vmbus_prep_negotiate_resp(icmsghdrp, NULL, - hbeat_txf_buf, UTIL_FW_MAJOR_MINOR, - HEARTBEAT_MAJOR_MINOR); + vmbus_prep_negotiate_resp(icmsghdrp, negop, + hbeat_txf_buf, util_fw_version, + hb_srv_version); } else { heartbeat_msg = (struct heartbeat_msg_data *)&hbeat_txf_buf[ @@ -321,6 +339,25 @@ static int util_probe(struct hv_device *dev, goto error; hv_set_drvdata(dev, srv); + /* + * Based on the host; initialize the framework and + * service version numbers we will negotiate. + */ + switch (vmbus_proto_version) { + case (VERSION_WS2008): + util_fw_version = UTIL_WS2K8_FW_VERSION; + sd_srv_version = SD_WS2008_VERSION; + ts_srv_version = TS_WS2008_VERSION; + hb_srv_version = HB_WS2008_VERSION; + break; + + default: + util_fw_version = UTIL_FW_VERSION; + sd_srv_version = SD_VERSION; + ts_srv_version = TS_VERSION; + hb_srv_version = HB_VERSION; + } + return 0; error: diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index a3b8b2e2d244..d98503bde7e9 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -30,10 +30,13 @@ /* * Framework version for util services. */ +#define UTIL_FW_MINOR 0 + +#define UTIL_WS2K8_FW_MAJOR 1 +#define UTIL_WS2K8_FW_VERSION (UTIL_WS2K8_FW_MAJOR << 16 | UTIL_FW_MINOR) #define UTIL_FW_MAJOR 3 -#define UTIL_FW_MINOR 0 -#define UTIL_FW_MAJOR_MINOR (UTIL_FW_MAJOR << 16 | UTIL_FW_MINOR) +#define UTIL_FW_VERSION (UTIL_FW_MAJOR << 16 | UTIL_FW_MINOR) /* From 8bbf9f440f196ee08cc5ab1c19e62b1c5a736ff0 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Wed, 4 Sep 2013 15:41:58 -0700 Subject: [PATCH 163/459] Drivers: hv: vmbus: Terminate vmbus version negotiation on timeout commit 666b9adc801ef012612c4e43e0f44b2cdc1979cf terminated vmbus version negotiation incorrectly. We need to terminate the version negotiation only if the current negotiation were to timeout. Signed-off-by: K. Y. Srinivasan Cc: Olaf Hering Signed-off-by: Greg Kroah-Hartman --- drivers/hv/connection.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c index 8f4743ab5fb2..936093e0271e 100644 --- a/drivers/hv/connection.c +++ b/drivers/hv/connection.c @@ -195,7 +195,7 @@ int vmbus_connect(void) do { ret = vmbus_negotiate_version(msginfo, version); - if (ret) + if (ret == -ETIMEDOUT) goto cleanup; if (vmbus_connection.conn_state == CONNECTED) From 667b4102b3e63856ca7770521ee74b1c44629df1 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Mon, 23 Sep 2013 14:41:17 -0700 Subject: [PATCH 164/459] sysfs: Allow mounting without CONFIG_NET In kobj_ns_current_may_mount the default should be to allow the mount. The test is only for a single kobj_ns_type at a time, and unless there is a reason to prevent it the mounting sysfs should be allowed. Subsystems that are not registered can't have are not involved so can't have a reason to prevent mounting sysfs. This is a bug-fix to: commit 7dc5dbc879bd0779924b5132a48b731a0bc04a1e Author: Eric W. Biederman Date: Mon Mar 25 20:07:01 2013 -0700 sysfs: Restrict mounting sysfs Don't allow mounting sysfs unless the caller has CAP_SYS_ADMIN rights over the net namespace. The principle here is if you create or have capabilities over it you can mount it, otherwise you get to live with what other people have mounted. Instead of testing this with a straight forward ns_capable call, perform this check the long and torturous way with kobject helpers, this keeps direct knowledge of namespaces out of sysfs, and preserves the existing sysfs abstractions. Acked-by: Greg Kroah-Hartman Signed-off-by: "Eric W. Biederman" That came in via the userns tree during the 3.12 merge window. Reported-by: James Hogan Signed-off-by: "Eric W. Biederman" Signed-off-by: Greg Kroah-Hartman --- lib/kobject.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/lib/kobject.c b/lib/kobject.c index 962175134702..669bf190d4fb 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -933,10 +933,7 @@ const struct kobj_ns_type_operations *kobj_ns_ops(struct kobject *kobj) bool kobj_ns_current_may_mount(enum kobj_ns_type type) { - bool may_mount = false; - - if (type == KOBJ_NS_TYPE_NONE) - return true; + bool may_mount = true; spin_lock(&kobj_ns_type_lock); if ((type > KOBJ_NS_TYPE_NONE) && (type < KOBJ_NS_TYPES) && From f123db8e9d6c84c863cb3c44d17e61995dc984fb Mon Sep 17 00:00:00 2001 From: Benson Leung Date: Tue, 24 Sep 2013 20:05:11 -0700 Subject: [PATCH 165/459] driver core : Fix use after free of dev->parent in device_shutdown The put_device(dev) at the bottom of the loop of device_shutdown may result in the dev being cleaned up. In device_create_release, the dev is kfreed. However, device_shutdown attempts to use the dev pointer again after put_device by referring to dev->parent. Copy the parent pointer instead to avoid this condition. This bug was found on Chromium OS's chromeos-3.8, which is based on v3.8.11. See bug report : https://code.google.com/p/chromium/issues/detail?id=297842 This can easily be reproduced when shutting down with hidraw devices that report battery condition. Two examples are the HP Bluetooth Mouse X4000b and the Apple Magic Mouse. For example, with the magic mouse : The dev in question is "hidraw0" dev->parent is "magicmouse" In the course of the shutdown for this device, the input event cleanup calls a put on hidraw0, decrementing its reference count. When we finally get to put_device(dev) in device_shutdown, kobject_cleanup is called and device_create_release does kfree(dev). dev->parent is no longer valid, and we may crash in put_device(dev->parent). This change should be applied on any kernel with this change : d1c6c030fcec6f860d9bb6c632a3ebe62e28440b Cc: stable@vger.kernel.org Signed-off-by: Benson Leung Reviewed-by: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index c7cfadcf6752..34abf4d8a45f 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -2017,7 +2017,7 @@ EXPORT_SYMBOL_GPL(device_move); */ void device_shutdown(void) { - struct device *dev; + struct device *dev, *parent; spin_lock(&devices_kset->list_lock); /* @@ -2034,7 +2034,7 @@ void device_shutdown(void) * prevent it from being freed because parent's * lock is to be held */ - get_device(dev->parent); + parent = get_device(dev->parent); get_device(dev); /* * Make sure the device is off the kset list, in the @@ -2044,8 +2044,8 @@ void device_shutdown(void) spin_unlock(&devices_kset->list_lock); /* hold lock to avoid race with probe/release */ - if (dev->parent) - device_lock(dev->parent); + if (parent) + device_lock(parent); device_lock(dev); /* Don't allow any more runtime suspends */ @@ -2063,11 +2063,11 @@ void device_shutdown(void) } device_unlock(dev); - if (dev->parent) - device_unlock(dev->parent); + if (parent) + device_unlock(parent); put_device(dev); - put_device(dev->parent); + put_device(parent); spin_lock(&devices_kset->list_lock); } From 2606b28aabd7dea1766c23a105e1124c95409c96 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 20 Sep 2013 17:14:21 +0100 Subject: [PATCH 166/459] USB: Fix breakage in ffs_fs_mount() There's a bunch of failure exits in ffs_fs_mount() with seriously broken recovery logics. Most of that appears to stem from misunderstanding of the ->kill_sb() semantics; unlike ->put_super() it is called for *all* superblocks of given type, no matter how (in)complete the setup had been. ->put_super() is called only if ->s_root is not NULL; any failure prior to setting ->s_root will have the call of ->put_super() skipped. ->kill_sb(), OTOH, awaits every superblock that has come from sget(). Current behaviour of ffs_fs_mount(): We have struct ffs_sb_fill_data data on stack there. We do ffs_dev = functionfs_acquire_dev_callback(dev_name); and store that in data.private_data. Then we call mount_nodev(), passing it ffs_sb_fill() as a callback. That will either fail outright, or manage to call ffs_sb_fill(). There we allocate an instance of struct ffs_data, slap the value of ffs_dev (picked from data.private_data) into ffs->private_data and overwrite data.private_data by storing ffs into an overlapping member (data.ffs_data). Then we store ffs into sb->s_fs_info and attempt to set the rest of the things up (root inode, root dentry, then create /ep0 there). Any of those might fail. Should that happen, we get ffs_fs_kill_sb() called before mount_nodev() returns. If mount_nodev() fails for any reason whatsoever, we proceed to functionfs_release_dev_callback(data.ffs_data); That's broken in a lot of ways. Suppose the thing has failed in allocation of e.g. root inode or dentry. We have functionfs_release_dev_callback(ffs); ffs_data_put(ffs); done by ffs_fs_kill_sb() (ffs accessed via sb->s_fs_info), followed by functionfs_release_dev_callback(ffs); from ffs_fs_mount() (via data.ffs_data). Note that the second functionfs_release_dev_callback() has every chance to be done to freed memory. Suppose we fail *before* root inode allocation. What happens then? ffs_fs_kill_sb() doesn't do anything to ffs (it's either not called at all, or it doesn't have a pointer to ffs stored in sb->s_fs_info). And functionfs_release_dev_callback(data.ffs_data); is called by ffs_fs_mount(), but here we are in nasal daemon country - we are reading from a member of union we'd never stored into. In practice, we'll get what we used to store into the overlapping field, i.e. ffs_dev. And then we get screwed, since we treat it (struct gfs_ffs_obj * in disguise, returned by functionfs_acquire_dev_callback()) as struct ffs_data *, pick what would've been ffs_data ->private_data from it (*well* past the actual end of the struct gfs_ffs_obj - struct ffs_data is much bigger) and poke in whatever it points to. FWIW, there's a minor leak on top of all that in case if ffs_sb_fill() fails on kstrdup() - ffs is obviously forgotten. The thing is, there is no point in playing all those games with union. Just allocate and initialize ffs_data *before* calling mount_nodev() and pass a pointer to it via data.ffs_data. And once it's stored in sb->s_fs_info, clear data.ffs_data, so that ffs_fs_mount() knows that it doesn't need to kill the sucker manually - from that point on we'll have it done by ->kill_sb(). Signed-off-by: Al Viro Acked-by: Michal Nazarewicz Cc: stable # 3.3+ Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_fs.c | 60 +++++++++++++++++---------------------- 1 file changed, 26 insertions(+), 34 deletions(-) diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 1a66c5baa0d1..0658908d8968 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -1034,37 +1034,19 @@ struct ffs_sb_fill_data { struct ffs_file_perms perms; umode_t root_mode; const char *dev_name; - union { - /* set by ffs_fs_mount(), read by ffs_sb_fill() */ - void *private_data; - /* set by ffs_sb_fill(), read by ffs_fs_mount */ - struct ffs_data *ffs_data; - }; + struct ffs_data *ffs_data; }; static int ffs_sb_fill(struct super_block *sb, void *_data, int silent) { struct ffs_sb_fill_data *data = _data; struct inode *inode; - struct ffs_data *ffs; + struct ffs_data *ffs = data->ffs_data; ENTER(); - /* Initialise data */ - ffs = ffs_data_new(); - if (unlikely(!ffs)) - goto Enomem; - ffs->sb = sb; - ffs->dev_name = kstrdup(data->dev_name, GFP_KERNEL); - if (unlikely(!ffs->dev_name)) - goto Enomem; - ffs->file_perms = data->perms; - ffs->private_data = data->private_data; - - /* used by the caller of this function */ - data->ffs_data = ffs; - + data->ffs_data = NULL; sb->s_fs_info = ffs; sb->s_blocksize = PAGE_CACHE_SIZE; sb->s_blocksize_bits = PAGE_CACHE_SHIFT; @@ -1080,17 +1062,14 @@ static int ffs_sb_fill(struct super_block *sb, void *_data, int silent) &data->perms); sb->s_root = d_make_root(inode); if (unlikely(!sb->s_root)) - goto Enomem; + return -ENOMEM; /* EP0 file */ if (unlikely(!ffs_sb_create_file(sb, "ep0", ffs, &ffs_ep0_operations, NULL))) - goto Enomem; + return -ENOMEM; return 0; - -Enomem: - return -ENOMEM; } static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts) @@ -1193,6 +1172,7 @@ ffs_fs_mount(struct file_system_type *t, int flags, struct dentry *rv; int ret; void *ffs_dev; + struct ffs_data *ffs; ENTER(); @@ -1200,18 +1180,30 @@ ffs_fs_mount(struct file_system_type *t, int flags, if (unlikely(ret < 0)) return ERR_PTR(ret); + ffs = ffs_data_new(); + if (unlikely(!ffs)) + return ERR_PTR(-ENOMEM); + ffs->file_perms = data.perms; + + ffs->dev_name = kstrdup(dev_name, GFP_KERNEL); + if (unlikely(!ffs->dev_name)) { + ffs_data_put(ffs); + return ERR_PTR(-ENOMEM); + } + ffs_dev = functionfs_acquire_dev_callback(dev_name); - if (IS_ERR(ffs_dev)) - return ffs_dev; + if (IS_ERR(ffs_dev)) { + ffs_data_put(ffs); + return ERR_CAST(ffs_dev); + } + ffs->private_data = ffs_dev; + data.ffs_data = ffs; - data.dev_name = dev_name; - data.private_data = ffs_dev; rv = mount_nodev(t, flags, &data, ffs_sb_fill); - - /* data.ffs_data is set by ffs_sb_fill */ - if (IS_ERR(rv)) + if (IS_ERR(rv) && data.ffs_data) { functionfs_release_dev_callback(data.ffs_data); - + ffs_data_put(data.ffs_data); + } return rv; } From eee41b49b80420e3e8c118d18dfacb7da43c1caa Mon Sep 17 00:00:00 2001 From: Shengzhou Liu Date: Mon, 2 Sep 2013 13:25:52 +0800 Subject: [PATCH 167/459] USB: fsl/ehci: fix failure of checking PHY_CLK_VALID during reinitialization In case of usb phy reinitialization: e.g. insmod usb-module(usb works well) -> rmmod usb-module -> insmod usb-module It found the PHY_CLK_VALID bit didn't work if it's not with the power-on reset. So we just check PHY_CLK_VALID bit during the stage with POR, this can be met by the tricky of checking FSL_SOC_USB_PRICTRL register. Signed-off-by: Shengzhou Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-fsl.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index d3166e693dcb..f2407b2e8a99 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -264,8 +264,9 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, if (pdata->have_sysif_regs && pdata->controller_ver && (phy_mode == FSL_USB2_PHY_ULPI)) { /* check PHY_CLK_VALID to get phy clk valid */ - if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & - PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) { + if (!(spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & + PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0) || + in_be32(non_ehci + FSL_SOC_USB_PRICTRL))) { printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n"); return -EINVAL; } From 85601f8cf67c56a561a6dd5e130e65fdc179047d Mon Sep 17 00:00:00 2001 From: David Cohen Date: Thu, 26 Sep 2013 13:01:44 -0700 Subject: [PATCH 168/459] usb: dwc3: add support for Merrifield Add PCI id for Intel Merrifield Signed-off-by: David Cohen Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 997ebe420bc9..2e252aae51ca 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -29,6 +29,7 @@ #define PCI_VENDOR_ID_SYNOPSYS 0x16c3 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd #define PCI_DEVICE_ID_INTEL_BYT 0x0f37 +#define PCI_DEVICE_ID_INTEL_MRFLD 0x119e struct dwc3_pci { struct device *dev; @@ -189,6 +190,7 @@ static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = { PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), }, { } /* Terminating Entry */ }; MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table); From df3f4edc6ca6e7768376d05eb99536bcf92362f0 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 26 Sep 2013 13:07:31 -0500 Subject: [PATCH 169/459] staging: r8188eu: Add new device ID The DLink DWA-125 Rev D1 also uses this driver. Signed-off-by: Larry Finger Reported-by: Sergey Kostanbaev Tested-by: Sergey Kostanbaev Cc: Sergey Kostanbaev Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/os_dep/usb_intf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c index d3078d200e50..9ca3180ebaa0 100644 --- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c +++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c @@ -54,6 +54,7 @@ static struct usb_device_id rtw_usb_id_tbl[] = { /*=== Customer ID ===*/ /****** 8188EUS ********/ {USB_DEVICE(0x8179, 0x07B8)}, /* Abocom - Abocom */ + {USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */ {} /* Terminating entry */ }; From 5e9ae2e5da0beb93f8557fc92a8f4fbc05ea448f Mon Sep 17 00:00:00 2001 From: Benjamin LaHaise Date: Thu, 26 Sep 2013 20:34:51 -0400 Subject: [PATCH 170/459] aio: fix use-after-free in aio_migratepage Dmitry Vyukov managed to trigger a case where aio_migratepage can cause a use-after-free during teardown of the aio ring buffer's mapping. This turns out to be caused by access to the ioctx's ring_pages via the migratepage operation which was not being protected by any locks during ioctx freeing. Use the address_space's private_lock to protect use and updates of the mapping's private_data, and make ioctx teardown unlink the ioctx from the address space. Reported-by: Dmitry Vyukov Tested-by: Dmitry Vyukov Signed-off-by: Benjamin LaHaise --- fs/aio.c | 52 +++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 37 insertions(+), 15 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index 6b868f0e0c4c..067e3d340c35 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -167,10 +167,25 @@ static int __init aio_setup(void) } __initcall(aio_setup); +static void put_aio_ring_file(struct kioctx *ctx) +{ + struct file *aio_ring_file = ctx->aio_ring_file; + if (aio_ring_file) { + truncate_setsize(aio_ring_file->f_inode, 0); + + /* Prevent further access to the kioctx from migratepages */ + spin_lock(&aio_ring_file->f_inode->i_mapping->private_lock); + aio_ring_file->f_inode->i_mapping->private_data = NULL; + ctx->aio_ring_file = NULL; + spin_unlock(&aio_ring_file->f_inode->i_mapping->private_lock); + + fput(aio_ring_file); + } +} + static void aio_free_ring(struct kioctx *ctx) { int i; - struct file *aio_ring_file = ctx->aio_ring_file; for (i = 0; i < ctx->nr_pages; i++) { pr_debug("pid(%d) [%d] page->count=%d\n", current->pid, i, @@ -178,14 +193,10 @@ static void aio_free_ring(struct kioctx *ctx) put_page(ctx->ring_pages[i]); } + put_aio_ring_file(ctx); + if (ctx->ring_pages && ctx->ring_pages != ctx->internal_pages) kfree(ctx->ring_pages); - - if (aio_ring_file) { - truncate_setsize(aio_ring_file->f_inode, 0); - fput(aio_ring_file); - ctx->aio_ring_file = NULL; - } } static int aio_ring_mmap(struct file *file, struct vm_area_struct *vma) @@ -207,9 +218,8 @@ static int aio_set_page_dirty(struct page *page) static int aio_migratepage(struct address_space *mapping, struct page *new, struct page *old, enum migrate_mode mode) { - struct kioctx *ctx = mapping->private_data; + struct kioctx *ctx; unsigned long flags; - unsigned idx = old->index; int rc; /* Writeback must be complete */ @@ -224,10 +234,23 @@ static int aio_migratepage(struct address_space *mapping, struct page *new, get_page(new); - spin_lock_irqsave(&ctx->completion_lock, flags); - migrate_page_copy(new, old); - ctx->ring_pages[idx] = new; - spin_unlock_irqrestore(&ctx->completion_lock, flags); + /* We can potentially race against kioctx teardown here. Use the + * address_space's private data lock to protect the mapping's + * private_data. + */ + spin_lock(&mapping->private_lock); + ctx = mapping->private_data; + if (ctx) { + pgoff_t idx; + spin_lock_irqsave(&ctx->completion_lock, flags); + migrate_page_copy(new, old); + idx = old->index; + if (idx < (pgoff_t)ctx->nr_pages) + ctx->ring_pages[idx] = new; + spin_unlock_irqrestore(&ctx->completion_lock, flags); + } else + rc = -EBUSY; + spin_unlock(&mapping->private_lock); return rc; } @@ -617,8 +640,7 @@ out_freepcpu: out_freeref: free_percpu(ctx->users.pcpu_count); out_freectx: - if (ctx->aio_ring_file) - fput(ctx->aio_ring_file); + put_aio_ring_file(ctx); kmem_cache_free(kioctx_cachep, ctx); pr_debug("error allocating ioctx %d\n", err); return ERR_PTR(err); From 0158026ccced1ae312233a6a46dc0b6edce3fb6c Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 27 Sep 2013 16:21:30 +0800 Subject: [PATCH 171/459] spi/clps711x: drop clk_put for devm_clk_get in spi_clps711x_probe() devm_clk_get() is used so there is no reason to explicitly call clk_put() in probe or remove functions. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-clps711x.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c index b597a92565dc..6416798828e7 100644 --- a/drivers/spi/spi-clps711x.c +++ b/drivers/spi/spi-clps711x.c @@ -226,7 +226,6 @@ static int spi_clps711x_probe(struct platform_device *pdev) dev_name(&pdev->dev), hw); if (ret) { dev_err(&pdev->dev, "Can't request IRQ\n"); - clk_put(hw->spi_clk); goto clk_out; } From 5cb1327172281cadb7ee8c5fa294d7ac8e09b8db Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 16 Sep 2013 17:59:20 -0700 Subject: [PATCH 172/459] mtd: nand: fix memory leak in ONFI extended parameter page This fixes a memory leak in the ONFI support code for detecting the required ECC levels from this commit: commit 6dcbe0cdd83fb5f77be4f44c9e06c535281c375a Author: Huang Shijie Date: Wed May 22 10:28:27 2013 +0800 mtd: get the ECC info from the Extended Parameter Page In the success case, we never freed the 'ep' buffer. Also, this fixes an oversight in the same commit where we (harmlessly) freed the NULL pointer. Signed-off-by: Brian Norris Acked-by: Huang Shijie Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 7ed4841327f2..d340b2f198c6 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2869,10 +2869,8 @@ static int nand_flash_detect_ext_param_page(struct mtd_info *mtd, len = le16_to_cpu(p->ext_param_page_length) * 16; ep = kmalloc(len, GFP_KERNEL); - if (!ep) { - ret = -ENOMEM; - goto ext_out; - } + if (!ep) + return -ENOMEM; /* Send our own NAND_CMD_PARAM. */ chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); @@ -2920,7 +2918,7 @@ static int nand_flash_detect_ext_param_page(struct mtd_info *mtd, } pr_info("ONFI extended param page detected.\n"); - return 0; + ret = 0; ext_out: kfree(ep); From 2b468ef0e7959b703626b64c4d264ef822c9267a Mon Sep 17 00:00:00 2001 From: Elie De Brauwer Date: Tue, 17 Sep 2013 19:48:22 +0200 Subject: [PATCH 173/459] mtd: m25p80: Fix 4 byte addressing mode for Micron devices. According to the datasheet for Micron n25q256a (N25Q256A13ESF40F) 4-byte addressing mode should be entered as follows: To enter or exit the 4-byte address mode, the WRITE ENABLE command must be executed to set the write enable latch bit to 1. (Note: The WRITE ENABLE command must NOT be executed on the N25Q256A83ESF40x and N25Q256A83E1240x devices.) S# must be driven LOW. The effect of the command is immediate; after the command has been executed, the write enable latch bit is cleared to 0. Micron's portable way to perform this for all types of Micron flash is to first issue a write enable, then switch the addressing mode followed by a write disable to avoid leaving the flash in a write- able state. Signed-off-by: Elie De Brauwer [Brian: reworked a bit] Signed-off-by: Brian Norris Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 26b14f9fcac6..6bc9618af094 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -168,12 +168,25 @@ static inline int write_disable(struct m25p *flash) */ static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable) { + int status; + bool need_wren = false; + switch (JEDEC_MFR(jedec_id)) { - case CFI_MFR_MACRONIX: case CFI_MFR_ST: /* Micron, actually */ + /* Some Micron need WREN command; all will accept it */ + need_wren = true; + case CFI_MFR_MACRONIX: case 0xEF /* winbond */: + if (need_wren) + write_enable(flash); + flash->command[0] = enable ? OPCODE_EN4B : OPCODE_EX4B; - return spi_write(flash->spi, flash->command, 1); + status = spi_write(flash->spi, flash->command, 1); + + if (need_wren) + write_disable(flash); + + return status; default: /* Spansion style */ flash->command[0] = OPCODE_BRWR; From c11eb222fd7d4db91196121dbf854178505d2751 Mon Sep 17 00:00:00 2001 From: Mischa Jonker Date: Thu, 26 Sep 2013 15:44:56 +0200 Subject: [PATCH 174/459] ARC: Handle zero-overhead-loop in unaligned access handler If a load or store is the last instruction in a zero-overhead-loop, and it's misaligned, the loop would execute only once. This fixes that problem. Signed-off-by: Mischa Jonker Signed-off-by: Vineet Gupta --- arch/arc/kernel/unaligned.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arc/kernel/unaligned.c b/arch/arc/kernel/unaligned.c index 28d170060747..7ff5b5c183bb 100644 --- a/arch/arc/kernel/unaligned.c +++ b/arch/arc/kernel/unaligned.c @@ -245,6 +245,12 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs, regs->status32 &= ~STATUS_DE_MASK; } else { regs->ret += state.instr_len; + + /* handle zero-overhead-loop */ + if ((regs->ret == regs->lp_end) && (regs->lp_count)) { + regs->ret = regs->lp_start; + regs->lp_count--; + } } return 0; From 0752adfda15f0eca9859a76da3db1800e129ad43 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 26 Sep 2013 18:50:40 +0530 Subject: [PATCH 175/459] ARC: Fix 32-bit wrap around in access_ok() Anton reported | LTP tests syscalls/process_vm_readv01 and process_vm_writev01 fail | similarly in one testcase test_iov_invalid -> lvec->iov_base. | Testcase expects errno EFAULT and return code -1, | but it gets return code 1 and ERRNO is 0 what means success. Essentially test case was passing a pointer of -1 which access_ok() was not catching. It was doing [@addr + @sz <= TASK_SIZE] which would pass for @addr == -1 Fixed that by rewriting as [@addr <= TASK_SIZE - @sz] Reported-by: Anton Kolesov Signed-off-by: Vineet Gupta --- arch/arc/include/asm/uaccess.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h index 32420824375b..30c9baffa96f 100644 --- a/arch/arc/include/asm/uaccess.h +++ b/arch/arc/include/asm/uaccess.h @@ -43,7 +43,7 @@ * Because it essentially checks if buffer end is within limit and @len is * non-ngeative, which implies that buffer start will be within limit too. * - * The reason for rewriting being, for majorit yof cases, @len is generally + * The reason for rewriting being, for majority of cases, @len is generally * compile time constant, causing first sub-expression to be compile time * subsumed. * @@ -53,7 +53,7 @@ * */ #define __user_ok(addr, sz) (((sz) <= TASK_SIZE) && \ - (((addr)+(sz)) <= get_fs())) + ((addr) <= (get_fs() - (sz)))) #define __access_ok(addr, sz) (unlikely(__kernel_ok) || \ likely(__user_ok((addr), (sz)))) From 6c00350b573c0bd3635436e43e8696951dd6e1b6 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 25 Sep 2013 16:53:32 +0530 Subject: [PATCH 176/459] ARC: Workaround spinlock livelock in SMP SystemC simulation Some ARC SMP systems lack native atomic R-M-W (LLOCK/SCOND) insns and can only use atomic EX insn (reg with mem) to build higher level R-M-W primitives. This includes a SystemC based SMP simulation model. So rwlocks need to use a protecting spinlock for atomic cmp-n-exchange operation to update reader(s)/writer count. The spinlock operation itself looks as follows: mov reg, 1 ; 1=locked, 0=unlocked retry: EX reg, [lock] ; load existing, store 1, atomically BREQ reg, 1, rety ; if already locked, retry In single-threaded simulation, SystemC alternates between the 2 cores with "N" insn each based scheduling. Additionally for insn with global side effect, such as EX writing to shared mem, a core switch is enforced too. Given that, 2 cores doing a repeated EX on same location, Linux often got into a livelock e.g. when both cores were fiddling with tasklist lock (gdbserver / hackbench) for read/write respectively as the sequence diagram below shows: core1 core2 -------- -------- 1. spin lock [EX r=0, w=1] - LOCKED 2. rwlock(Read) - LOCKED 3. spin unlock [ST 0] - UNLOCKED spin lock [EX r=0,w=1] - LOCKED -- resched core 1---- 5. spin lock [EX r=1] - ALREADY-LOCKED -- resched core 2---- 6. rwlock(Write) - READER-LOCKED 7. spin unlock [ST 0] 8. rwlock failed, retry again 9. spin lock [EX r=0, w=1] -- resched core 1---- 10 spinlock locked in #9, retry #5 11. spin lock [EX gets 1] -- resched core 2---- ... ... The fix was to unlock using the EX insn too (step 7), to trigger another SystemC scheduling pass which would let core1 proceed, eliding the livelock. Signed-off-by: Vineet Gupta --- arch/arc/include/asm/spinlock.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arc/include/asm/spinlock.h b/arch/arc/include/asm/spinlock.h index f158197ac5b0..b6a8c2dfbe6e 100644 --- a/arch/arc/include/asm/spinlock.h +++ b/arch/arc/include/asm/spinlock.h @@ -45,7 +45,14 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock) static inline void arch_spin_unlock(arch_spinlock_t *lock) { - lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__; + unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__; + + __asm__ __volatile__( + " ex %0, [%1] \n" + : "+r" (tmp) + : "r"(&(lock->slock)) + : "memory"); + smp_mb(); } From 55c2e26204276b27f2b7a63123b701c950e45d89 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 24 Sep 2013 23:05:37 +0200 Subject: [PATCH 177/459] ARC: Use clockevents_config_and_register over clockevents_register_device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit clockevents_config_and_register is more clever and correct than doing it by hand; so use it. [vgupta: fixed build failure due to missing ; in patch] Signed-off-by: Uwe Kleine-König Signed-off-by: Vineet Gupta --- arch/arc/kernel/time.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c index 0e51e69cf30d..3fde7de3ea67 100644 --- a/arch/arc/kernel/time.c +++ b/arch/arc/kernel/time.c @@ -227,12 +227,9 @@ void __attribute__((weak)) arc_local_timer_setup(unsigned int cpu) { struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu); - clockevents_calc_mult_shift(clk, arc_get_core_freq(), 5); - - clk->max_delta_ns = clockevent_delta2ns(ARC_TIMER_MAX, clk); clk->cpumask = cpumask_of(cpu); - - clockevents_register_device(clk); + clockevents_config_and_register(clk, arc_get_core_freq(), + 0, ARC_TIMER_MAX); /* * setup the per-cpu timer IRQ handler - for all cpus From 5aa3a44918db13257ade0bb1caf662f7815de357 Mon Sep 17 00:00:00 2001 From: Todd Fujinaka Date: Tue, 17 Sep 2013 05:08:48 +0000 Subject: [PATCH 178/459] igb: Fix ethtool loopback test for 82580 copper Add back 82580 loopback tests to ethtool. Signed-off-by: Todd Fujinaka Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index 48cbc833b051..86d51429a189 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -1607,6 +1607,9 @@ static int igb_integrated_phy_loopback(struct igb_adapter *adapter) igb_write_phy_reg(hw, I347AT4_PAGE_SELECT, 0); igb_write_phy_reg(hw, PHY_CONTROL, 0x4140); } + } else if (hw->phy.type == e1000_phy_82580) { + /* enable MII loopback */ + igb_write_phy_reg(hw, I82580_PHY_LBK_CTRL, 0x8041); } /* add small delay to avoid loopback test failure */ From 93bc73b8273e40d8202764a1096ce59c5f7f7c0c Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Fri, 13 Sep 2013 08:23:18 +0000 Subject: [PATCH 179/459] i40e: use common failure flow As mentioned by Joe Perches, we should be using foo = alloc(...) if (!foo) return -ENOMEM; return 0; Signed-off-by: Jesse Brandeburg CC: Joe Perches Tested-by: Kavindya Deegala Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 601d482694ea..67f8fd538a8d 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -101,10 +101,10 @@ int i40e_allocate_dma_mem_d(struct i40e_hw *hw, struct i40e_dma_mem *mem, mem->size = ALIGN(size, alignment); mem->va = dma_zalloc_coherent(&pf->pdev->dev, mem->size, &mem->pa, GFP_KERNEL); - if (mem->va) - return 0; + if (!mem->va) + return -ENOMEM; - return -ENOMEM; + return 0; } /** @@ -136,10 +136,10 @@ int i40e_allocate_virt_mem_d(struct i40e_hw *hw, struct i40e_virt_mem *mem, mem->size = size; mem->va = kzalloc(size, GFP_KERNEL); - if (mem->va) - return 0; + if (!mem->va) + return -ENOMEM; - return -ENOMEM; + return 0; } /** From ddf434acc0f60839ca20c0b851932b0b2a05993c Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Fri, 13 Sep 2013 08:23:19 +0000 Subject: [PATCH 180/459] i40e: small clean ups from review As mentioned by Joe Perches clean up a loop flow. Signed-off-by: Jesse Brandeburg CC: Joe Perches Tested-by: Kavindya Deegala Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 67f8fd538a8d..865bc6be7287 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -174,8 +174,7 @@ static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile, u16 needed, u16 id) { int ret = -ENOMEM; - int i = 0; - int j = 0; + int i, j; if (!pile || needed == 0 || id >= I40E_PILE_VALID_BIT) { dev_info(&pf->pdev->dev, @@ -186,7 +185,7 @@ static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile, /* start the linear search with an imperfect hint */ i = pile->search_hint; - while (i < pile->num_entries && ret < 0) { + while (i < pile->num_entries) { /* skip already allocated entries */ if (pile->list[i] & I40E_PILE_VALID_BIT) { i++; @@ -205,6 +204,7 @@ static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile, pile->list[i+j] = id | I40E_PILE_VALID_BIT; ret = i; pile->search_hint = i + j; + break; } else { /* not enough, so skip over it and continue looking */ i += j; From dcae29be4fba85cc9965511f5c112bd08892b1cb Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Fri, 13 Sep 2013 08:23:20 +0000 Subject: [PATCH 181/459] i40e: convert ret to aq_ret When calling admin queue functions the driver should use aq_ret variable to help make clear that the return value is not a regular return variable. This allows for clean up of the return types that were previously converted to int. Signed-off-by: Jesse Brandeburg Tested-by: Kavindya Deegala Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 107 ++++++++++---------- 1 file changed, 52 insertions(+), 55 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 865bc6be7287..60c71527f57c 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -1388,7 +1388,7 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) bool add_happened = false; int filter_list_len = 0; u32 changed_flags = 0; - i40e_status ret = 0; + i40e_status aq_ret = 0; struct i40e_pf *pf; int num_add = 0; int num_del = 0; @@ -1449,28 +1449,28 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) /* flush a full buffer */ if (num_del == filter_list_len) { - ret = i40e_aq_remove_macvlan(&pf->hw, + aq_ret = i40e_aq_remove_macvlan(&pf->hw, vsi->seid, del_list, num_del, NULL); num_del = 0; memset(del_list, 0, sizeof(*del_list)); - if (ret) + if (aq_ret) dev_info(&pf->pdev->dev, "ignoring delete macvlan error, err %d, aq_err %d while flushing a full buffer\n", - ret, + aq_ret, pf->hw.aq.asq_last_status); } } if (num_del) { - ret = i40e_aq_remove_macvlan(&pf->hw, vsi->seid, + aq_ret = i40e_aq_remove_macvlan(&pf->hw, vsi->seid, del_list, num_del, NULL); num_del = 0; - if (ret) + if (aq_ret) dev_info(&pf->pdev->dev, "ignoring delete macvlan error, err %d, aq_err %d\n", - ret, pf->hw.aq.asq_last_status); + aq_ret, pf->hw.aq.asq_last_status); } kfree(del_list); @@ -1515,32 +1515,30 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) /* flush a full buffer */ if (num_add == filter_list_len) { - ret = i40e_aq_add_macvlan(&pf->hw, - vsi->seid, - add_list, - num_add, - NULL); + aq_ret = i40e_aq_add_macvlan(&pf->hw, vsi->seid, + add_list, num_add, + NULL); num_add = 0; - if (ret) + if (aq_ret) break; memset(add_list, 0, sizeof(*add_list)); } } if (num_add) { - ret = i40e_aq_add_macvlan(&pf->hw, vsi->seid, - add_list, num_add, NULL); + aq_ret = i40e_aq_add_macvlan(&pf->hw, vsi->seid, + add_list, num_add, NULL); num_add = 0; } kfree(add_list); add_list = NULL; - if (add_happened && (!ret)) { + if (add_happened && (!aq_ret)) { /* do nothing */; - } else if (add_happened && (ret)) { + } else if (add_happened && (aq_ret)) { dev_info(&pf->pdev->dev, "add filter failed, err %d, aq_err %d\n", - ret, pf->hw.aq.asq_last_status); + aq_ret, pf->hw.aq.asq_last_status); if ((pf->hw.aq.asq_last_status == I40E_AQ_RC_ENOSPC) && !test_bit(__I40E_FILTER_OVERFLOW_PROMISC, &vsi->state)) { @@ -1556,28 +1554,27 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) if (changed_flags & IFF_ALLMULTI) { bool cur_multipromisc; cur_multipromisc = !!(vsi->current_netdev_flags & IFF_ALLMULTI); - ret = i40e_aq_set_vsi_multicast_promiscuous(&vsi->back->hw, - vsi->seid, - cur_multipromisc, - NULL); - if (ret) + aq_ret = i40e_aq_set_vsi_multicast_promiscuous(&vsi->back->hw, + vsi->seid, + cur_multipromisc, + NULL); + if (aq_ret) dev_info(&pf->pdev->dev, "set multi promisc failed, err %d, aq_err %d\n", - ret, pf->hw.aq.asq_last_status); + aq_ret, pf->hw.aq.asq_last_status); } if ((changed_flags & IFF_PROMISC) || promisc_forced_on) { bool cur_promisc; cur_promisc = (!!(vsi->current_netdev_flags & IFF_PROMISC) || test_bit(__I40E_FILTER_OVERFLOW_PROMISC, &vsi->state)); - ret = i40e_aq_set_vsi_unicast_promiscuous(&vsi->back->hw, - vsi->seid, - cur_promisc, - NULL); - if (ret) + aq_ret = i40e_aq_set_vsi_unicast_promiscuous(&vsi->back->hw, + vsi->seid, + cur_promisc, NULL); + if (aq_ret) dev_info(&pf->pdev->dev, "set uni promisc failed, err %d, aq_err %d\n", - ret, pf->hw.aq.asq_last_status); + aq_ret, pf->hw.aq.asq_last_status); } clear_bit(__I40E_CONFIG_BUSY, &vsi->state); @@ -1936,10 +1933,10 @@ static void i40e_restore_vlan(struct i40e_vsi *vsi) * @vsi: the vsi being adjusted * @vid: the vlan id to set as a PVID **/ -i40e_status i40e_vsi_add_pvid(struct i40e_vsi *vsi, u16 vid) +int i40e_vsi_add_pvid(struct i40e_vsi *vsi, u16 vid) { struct i40e_vsi_context ctxt; - i40e_status ret; + i40e_status aq_ret; vsi->info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID); vsi->info.pvid = cpu_to_le16(vid); @@ -1948,14 +1945,15 @@ i40e_status i40e_vsi_add_pvid(struct i40e_vsi *vsi, u16 vid) ctxt.seid = vsi->seid; memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info)); - ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL); - if (ret) { + aq_ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL); + if (aq_ret) { dev_info(&vsi->back->pdev->dev, "%s: update vsi failed, aq_err=%d\n", __func__, vsi->back->hw.aq.asq_last_status); + return -ENOENT; } - return ret; + return 0; } /** @@ -3451,28 +3449,27 @@ static int i40e_vsi_get_bw_info(struct i40e_vsi *vsi) struct i40e_aqc_query_vsi_bw_config_resp bw_config = {0}; struct i40e_pf *pf = vsi->back; struct i40e_hw *hw = &pf->hw; + i40e_status aq_ret; u32 tc_bw_max; - int ret; int i; /* Get the VSI level BW configuration */ - ret = i40e_aq_query_vsi_bw_config(hw, vsi->seid, &bw_config, NULL); - if (ret) { + aq_ret = i40e_aq_query_vsi_bw_config(hw, vsi->seid, &bw_config, NULL); + if (aq_ret) { dev_info(&pf->pdev->dev, "couldn't get pf vsi bw config, err %d, aq_err %d\n", - ret, pf->hw.aq.asq_last_status); - return ret; + aq_ret, pf->hw.aq.asq_last_status); + return -EINVAL; } /* Get the VSI level BW configuration per TC */ - ret = i40e_aq_query_vsi_ets_sla_config(hw, vsi->seid, - &bw_ets_config, - NULL); - if (ret) { + aq_ret = i40e_aq_query_vsi_ets_sla_config(hw, vsi->seid, &bw_ets_config, + NULL); + if (aq_ret) { dev_info(&pf->pdev->dev, "couldn't get pf vsi ets bw config, err %d, aq_err %d\n", - ret, pf->hw.aq.asq_last_status); - return ret; + aq_ret, pf->hw.aq.asq_last_status); + return -EINVAL; } if (bw_config.tc_valid_bits != bw_ets_config.tc_valid_bits) { @@ -3494,7 +3491,7 @@ static int i40e_vsi_get_bw_info(struct i40e_vsi *vsi) /* 3 bits out of 4 for each TC */ vsi->bw_ets_max_quanta[i] = (u8)((tc_bw_max >> (i*4)) & 0x7); } - return ret; + return 0; } /** @@ -3505,30 +3502,30 @@ static int i40e_vsi_get_bw_info(struct i40e_vsi *vsi) * * Returns 0 on success, negative value on failure **/ -static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, - u8 enabled_tc, +static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc, u8 *bw_share) { struct i40e_aqc_configure_vsi_tc_bw_data bw_data; - int i, ret = 0; + i40e_status aq_ret; + int i; bw_data.tc_valid_bits = enabled_tc; for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) bw_data.tc_bw_credits[i] = bw_share[i]; - ret = i40e_aq_config_vsi_tc_bw(&vsi->back->hw, vsi->seid, - &bw_data, NULL); - if (ret) { + aq_ret = i40e_aq_config_vsi_tc_bw(&vsi->back->hw, vsi->seid, &bw_data, + NULL); + if (aq_ret) { dev_info(&vsi->back->pdev->dev, "%s: AQ command Config VSI BW allocation per TC failed = %d\n", __func__, vsi->back->hw.aq.asq_last_status); - return ret; + return -EINVAL; } for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) vsi->info.qs_handle[i] = bw_data.qs_handles[i]; - return ret; + return 0; } /** From 078b587648950e75a4a303e4afbb127d2dd323dc Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Wed, 25 Sep 2013 23:41:14 +0000 Subject: [PATCH 182/459] i40e: better return values As mentioned by Joe Perches, clean up return values in some functions making sure to have consistent return types, not mixing types. A couple of Joe's comments suggested returning void, but since the functions in question are ndo defined, the return values are fixed. So make a comment in the header that notes this is a function called by net_device_ops. v2: fix post increment bug in return CC: Joe Perches Signed-off-by: Jesse Brandeburg Tested-by: Kavindya Deegala Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 37 ++++++++++++--------- 1 file changed, 21 insertions(+), 16 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 60c71527f57c..221aa4795017 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -1787,6 +1787,8 @@ int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid) * i40e_vsi_kill_vlan - Remove vsi membership for given vlan * @vsi: the vsi being configured * @vid: vlan id to be removed (0 = untagged only , -1 = any) + * + * Return: 0 on success or negative otherwise **/ int i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid) { @@ -1860,37 +1862,39 @@ int i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid) * i40e_vlan_rx_add_vid - Add a vlan id filter to HW offload * @netdev: network interface to be adjusted * @vid: vlan id to be added + * + * net_device_ops implementation for adding vlan ids **/ static int i40e_vlan_rx_add_vid(struct net_device *netdev, __always_unused __be16 proto, u16 vid) { struct i40e_netdev_priv *np = netdev_priv(netdev); struct i40e_vsi *vsi = np->vsi; - int ret; + int ret = 0; if (vid > 4095) - return 0; + return -EINVAL; + + netdev_info(netdev, "adding %pM vid=%d\n", netdev->dev_addr, vid); - netdev_info(vsi->netdev, "adding %pM vid=%d\n", - netdev->dev_addr, vid); /* If the network stack called us with vid = 0, we should * indicate to i40e_vsi_add_vlan() that we want to receive * any traffic (i.e. with any vlan tag, or untagged) */ ret = i40e_vsi_add_vlan(vsi, vid ? vid : I40E_VLAN_ANY); - if (!ret) { - if (vid < VLAN_N_VID) - set_bit(vid, vsi->active_vlans); - } + if (!ret && (vid < VLAN_N_VID)) + set_bit(vid, vsi->active_vlans); - return 0; + return ret; } /** * i40e_vlan_rx_kill_vid - Remove a vlan id filter from HW offload * @netdev: network interface to be adjusted * @vid: vlan id to be removed + * + * net_device_ops implementation for adding vlan ids **/ static int i40e_vlan_rx_kill_vid(struct net_device *netdev, __always_unused __be16 proto, u16 vid) @@ -1898,15 +1902,16 @@ static int i40e_vlan_rx_kill_vid(struct net_device *netdev, struct i40e_netdev_priv *np = netdev_priv(netdev); struct i40e_vsi *vsi = np->vsi; - netdev_info(vsi->netdev, "removing %pM vid=%d\n", - netdev->dev_addr, vid); + netdev_info(netdev, "removing %pM vid=%d\n", netdev->dev_addr, vid); + /* return code is ignored as there is nothing a user * can do about failure to remove and a log message was - * already printed from another function + * already printed from the other function */ i40e_vsi_kill_vlan(vsi, vid); clear_bit(vid, vsi->active_vlans); + return 0; } @@ -3324,7 +3329,8 @@ static void i40e_pf_unquiesce_all_vsi(struct i40e_pf *pf) **/ static u8 i40e_dcb_get_num_tc(struct i40e_dcbx_config *dcbcfg) { - int num_tc = 0, i; + u8 num_tc = 0; + int i; /* Scan the ETS Config Priority Table to find * traffic class enabled for a given priority @@ -3339,9 +3345,7 @@ static u8 i40e_dcb_get_num_tc(struct i40e_dcbx_config *dcbcfg) /* Traffic class index starts from zero so * increment to return the actual count */ - num_tc++; - - return num_tc; + return num_tc + 1; } /** @@ -3491,6 +3495,7 @@ static int i40e_vsi_get_bw_info(struct i40e_vsi *vsi) /* 3 bits out of 4 for each TC */ vsi->bw_ets_max_quanta[i] = (u8)((tc_bw_max >> (i*4)) & 0x7); } + return 0; } From d7595a226f6b304f0e51fc31f96bf00d1500f78a Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Fri, 13 Sep 2013 08:23:22 +0000 Subject: [PATCH 183/459] i40e: clean up coccicheck reported errors coccicheck shows: drivers/net/ethernet/intel/i40e/i40e_adminq.c:704:2-8: Replace memcpy with struct assignment drivers/net/ethernet/intel/i40e/i40e_adminq.c:763:1-7: Replace memcpy with struct assignment drivers/net/ethernet/intel/i40e/i40e_adminq.c:810:2-8: Replace memcpy with struct assignment drivers/net/ethernet/intel/i40e/i40e_common.c:510:2-8: Replace memcpy with struct assignment Fix each of them with a *a = *b; Signed-off-by: Jesse Brandeburg Tested-by: Kavindya Deegala Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_adminq.c | 7 +++---- drivers/net/ethernet/intel/i40e/i40e_common.c | 2 +- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.c b/drivers/net/ethernet/intel/i40e/i40e_adminq.c index 0c524fa9f811..cfef7fc32cdd 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_adminq.c +++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.c @@ -701,8 +701,7 @@ i40e_status i40e_asq_send_command(struct i40e_hw *hw, details = I40E_ADMINQ_DETAILS(hw->aq.asq, hw->aq.asq.next_to_use); if (cmd_details) { - memcpy(details, cmd_details, - sizeof(struct i40e_asq_cmd_details)); + *details = *cmd_details; /* If the cmd_details are defined copy the cookie. The * cpu_to_le32 is not needed here because the data is ignored @@ -760,7 +759,7 @@ i40e_status i40e_asq_send_command(struct i40e_hw *hw, desc_on_ring = I40E_ADMINQ_DESC(hw->aq.asq, hw->aq.asq.next_to_use); /* if the desc is available copy the temp desc to the right place */ - memcpy(desc_on_ring, desc, sizeof(struct i40e_aq_desc)); + *desc_on_ring = *desc; /* if buff is not NULL assume indirect command */ if (buff != NULL) { @@ -807,7 +806,7 @@ i40e_status i40e_asq_send_command(struct i40e_hw *hw, /* if ready, copy the desc back to temp */ if (i40e_asq_done(hw)) { - memcpy(desc, desc_on_ring, sizeof(struct i40e_aq_desc)); + *desc = *desc_on_ring; if (buff != NULL) memcpy(buff, dma_buff->va, buff_size); retval = le16_to_cpu(desc->retval); diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c index c21df7bc3b1d..1e4ea134975a 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_common.c +++ b/drivers/net/ethernet/intel/i40e/i40e_common.c @@ -507,7 +507,7 @@ i40e_status i40e_aq_get_link_info(struct i40e_hw *hw, /* save link status information */ if (link) - memcpy(link, hw_link_info, sizeof(struct i40e_link_status)); + *link = *hw_link_info; /* flag cleared so helper functions don't call AQ again */ hw->phy.get_link_info = false; From 3e2bd64d243ff0f3dc08c49ff218fed42ee9d981 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 27 Sep 2013 11:52:35 +0100 Subject: [PATCH 184/459] spi/s3c64xx: Ensure runtime PM is enabled prior to registration Otherwise we may try to start transfers immediately and then fail to runtime resume the device causing us not to have clocks enabled. Signed-off-by: Mark Brown Reviewed-by: Sylwester Nawrocki Conflicts: drivers/spi/spi-s3c64xx.c --- drivers/spi/spi-s3c64xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 512b8893893b..a80376dc3a10 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -1428,6 +1428,8 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) S3C64XX_SPI_INT_TX_OVERRUN_EN | S3C64XX_SPI_INT_TX_UNDERRUN_EN, sdd->regs + S3C64XX_SPI_INT_EN); + pm_runtime_enable(&pdev->dev); + if (spi_register_master(master)) { dev_err(&pdev->dev, "cannot register SPI master\n"); ret = -EBUSY; @@ -1440,8 +1442,6 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) mem_res, sdd->rx_dma.dmach, sdd->tx_dma.dmach); - pm_runtime_enable(&pdev->dev); - return 0; err3: From 4880292556f7ea7c12dbccb1c7dfd9fd0f38bcf3 Mon Sep 17 00:00:00 2001 From: Mateusz Krawczuk Date: Tue, 24 Sep 2013 17:04:11 +0200 Subject: [PATCH 185/459] pinctrl: Correct number of pins for s5pv210 Values of pins in table s5pv210 bank are incorrect. This patch correct values. Signed-off-by: Mateusz Krawczuk Signed-off-by: Kyungmin Park Acked-by: Tomasz Figa Acked-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-exynos.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 2689f8d01a1e..155b1b3a0e7a 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -663,18 +663,18 @@ static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata) /* pin banks of s5pv210 pin-controller */ static struct samsung_pin_bank s5pv210_pin_bank[] = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), - EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), + EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpa1", 0x04), EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c), EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10), EXYNOS_PIN_BANK_EINTG(4, 0x0a0, "gpd0", 0x14), - EXYNOS_PIN_BANK_EINTG(4, 0x0c0, "gpd1", 0x18), - EXYNOS_PIN_BANK_EINTG(5, 0x0e0, "gpe0", 0x1c), - EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1", 0x20), - EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpf0", 0x24), + EXYNOS_PIN_BANK_EINTG(6, 0x0c0, "gpd1", 0x18), + EXYNOS_PIN_BANK_EINTG(8, 0x0e0, "gpe0", 0x1c), + EXYNOS_PIN_BANK_EINTG(5, 0x100, "gpe1", 0x20), + EXYNOS_PIN_BANK_EINTG(8, 0x120, "gpf0", 0x24), EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpf1", 0x28), EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpf2", 0x2c), - EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf3", 0x30), + EXYNOS_PIN_BANK_EINTG(6, 0x180, "gpf3", 0x30), EXYNOS_PIN_BANK_EINTG(7, 0x1a0, "gpg0", 0x34), EXYNOS_PIN_BANK_EINTG(7, 0x1c0, "gpg1", 0x38), EXYNOS_PIN_BANK_EINTG(7, 0x1e0, "gpg2", 0x3c), From bf00ca35cec8f0894dcfd90f88b03af1d5c7b86f Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 27 Sep 2013 08:25:14 -0500 Subject: [PATCH 186/459] regulator: ti-abb: Fix bias voltage glitch in transition to bypass mode As documented in Application Note SWPA117 v2.1(NDA), LDO override has a requirement that when switching from Bias active + override active mode(FBB/RBB) to Bypass(nominal) mode, LDO reset must be performed *after* LDO transitions to Bypass(nominal) mode. The same rule in reverse applies when switching from a ABB bypass mode to ABB enabled - LDO override *must* be performed prior to transition to required ABB mode, if we do not do that, the same glitch takes place. Currently while transitioning to ABB bypass, we reset the LDO overide prior to the transition which causes a few milliseconds where ABB LDO voltage could go all the way to 800mV(based on SoC process node), during this period, the delta voltage between VDD rail and VBB rail could cause the system to improperly function. Signed-off-by: Nishanth Menon Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/ti-abb-regulator.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/ti-abb-regulator.c b/drivers/regulator/ti-abb-regulator.c index d8e3e1262bc2..20c271d49dcb 100644 --- a/drivers/regulator/ti-abb-regulator.c +++ b/drivers/regulator/ti-abb-regulator.c @@ -279,8 +279,12 @@ static int ti_abb_set_opp(struct regulator_dev *rdev, struct ti_abb *abb, ti_abb_rmw(regs->opp_sel_mask, info->opp_sel, regs->control_reg, abb->base); - /* program LDO VBB vset override if needed */ - if (abb->ldo_base) + /* + * program LDO VBB vset override if needed for !bypass mode + * XXX: Do not switch sequence - for !bypass, LDO override reset *must* + * be performed *before* switch to bias mode else VBB glitches. + */ + if (abb->ldo_base && info->opp_sel != TI_ABB_NOMINAL_OPP) ti_abb_program_ldovbb(dev, abb, info); /* Initiate ABB ldo change */ @@ -295,6 +299,14 @@ static int ti_abb_set_opp(struct regulator_dev *rdev, struct ti_abb *abb, if (ret) goto out; + /* + * Reset LDO VBB vset override bypass mode + * XXX: Do not switch sequence - for bypass, LDO override reset *must* + * be performed *after* switch to bypass else VBB glitches. + */ + if (abb->ldo_base && info->opp_sel == TI_ABB_NOMINAL_OPP) + ti_abb_program_ldovbb(dev, abb, info); + out: return ret; } From 7fd9ddd5f71078df34f2fd7d375fbf0a8d92f9cc Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Thu, 26 Sep 2013 18:18:03 +0530 Subject: [PATCH 187/459] pinctrl: palmas: do not abort pin configuration for BIAS_DEFAULT Recent movement of all configurations of pin in the single call of pin_config_set(), it is aborting configuration if BIAS_PULL_PIN_DEFAULT is selected as return of configuration. The original idea was to just avoid any update on register for pull up/down configuration if this option is selected. Fixing this by just bypassing any register update for BIAS_PULL_PIN_DEFAULT and continuing the remaining configuration. Signed-off-by: Laxman Dewangan Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-palmas.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinctrl-palmas.c b/drivers/pinctrl/pinctrl-palmas.c index 82638fac3cfa..30c4d356cb33 100644 --- a/drivers/pinctrl/pinctrl-palmas.c +++ b/drivers/pinctrl/pinctrl-palmas.c @@ -891,9 +891,10 @@ static int palmas_pinconf_set(struct pinctrl_dev *pctldev, param = pinconf_to_config_param(configs[i]); param_val = pinconf_to_config_argument(configs[i]); + if (param == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT) + continue; + switch (param) { - case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: - return 0; case PIN_CONFIG_BIAS_DISABLE: case PIN_CONFIG_BIAS_PULL_UP: case PIN_CONFIG_BIAS_PULL_DOWN: From 6db83cea1c975b9a102e17def7d2795814e1ae2b Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Fri, 27 Sep 2013 09:04:41 +0100 Subject: [PATCH 188/459] arm64: fix possible invalid FPSIMD initialization state If context switching happens during executing fpsimd_flush_thread(), stale value in FPSIMD registers will be saved into current thread's fpsimd_state by fpsimd_thread_switch(). That may cause invalid initialization state for the new process, so disable preemption when executing fpsimd_flush_thread(). Signed-off-by: Jiang Liu Cc: Jiang Liu Signed-off-by: Catalin Marinas --- arch/arm64/kernel/fpsimd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 1f2e4d5a5c0f..bb785d23dbde 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -80,8 +80,10 @@ void fpsimd_thread_switch(struct task_struct *next) void fpsimd_flush_thread(void) { + preempt_disable(); memset(¤t->thread.fpsimd_state, 0, sizeof(struct fpsimd_state)); fpsimd_load_state(¤t->thread.fpsimd_state); + preempt_enable(); } #ifdef CONFIG_KERNEL_MODE_NEON From b924a69067b00d3121debae5a738fb0bcbbbb03c Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Wed, 25 Sep 2013 12:14:08 +0800 Subject: [PATCH 189/459] tile: include: asm: use 'long long' instead of 'u64' for atomic64_t and its related functions atomic* value is signed value, and atomic* functions need also process signed value (parameter value, and return value), so use 'long long' instead of 'u64'. After replacement, it will also fix a bug for atomic64_add_negative(): "u64 is never less than 0". The modifications are: in vim, use "1,% s/\/long long/g" command. remove redundant '__aligned(8)'. be sure of 80 (and macro '\') columns limitation after replacement. Signed-off-by: Chen Gang Signed-off-by: Chris Metcalf [re-instated const cast] --- arch/tile/include/asm/atomic.h | 5 +++-- arch/tile/include/asm/atomic_32.h | 27 +++++++++++++++------------ arch/tile/include/asm/cmpxchg.h | 28 +++++++++++++++++----------- arch/tile/lib/atomic_32.c | 8 ++++---- 4 files changed, 39 insertions(+), 29 deletions(-) diff --git a/arch/tile/include/asm/atomic.h b/arch/tile/include/asm/atomic.h index d385eaadece7..709798460763 100644 --- a/arch/tile/include/asm/atomic.h +++ b/arch/tile/include/asm/atomic.h @@ -166,7 +166,7 @@ static inline int atomic_cmpxchg(atomic_t *v, int o, int n) * * Atomically sets @v to @i and returns old @v */ -static inline u64 atomic64_xchg(atomic64_t *v, u64 n) +static inline long long atomic64_xchg(atomic64_t *v, long long n) { return xchg64(&v->counter, n); } @@ -180,7 +180,8 @@ static inline u64 atomic64_xchg(atomic64_t *v, u64 n) * Atomically checks if @v holds @o and replaces it with @n if so. * Returns the old value at @v. */ -static inline u64 atomic64_cmpxchg(atomic64_t *v, u64 o, u64 n) +static inline long long atomic64_cmpxchg(atomic64_t *v, long long o, + long long n) { return cmpxchg64(&v->counter, o, n); } diff --git a/arch/tile/include/asm/atomic_32.h b/arch/tile/include/asm/atomic_32.h index 0d0395b1b152..1ad4a1f7d42b 100644 --- a/arch/tile/include/asm/atomic_32.h +++ b/arch/tile/include/asm/atomic_32.h @@ -80,7 +80,7 @@ static inline void atomic_set(atomic_t *v, int n) /* A 64bit atomic type */ typedef struct { - u64 __aligned(8) counter; + long long counter; } atomic64_t; #define ATOMIC64_INIT(val) { (val) } @@ -91,14 +91,14 @@ typedef struct { * * Atomically reads the value of @v. */ -static inline u64 atomic64_read(const atomic64_t *v) +static inline long long atomic64_read(const atomic64_t *v) { /* * Requires an atomic op to read both 32-bit parts consistently. * Casting away const is safe since the atomic support routines * do not write to memory if the value has not been modified. */ - return _atomic64_xchg_add((u64 *)&v->counter, 0); + return _atomic64_xchg_add((long long *)&v->counter, 0); } /** @@ -108,7 +108,7 @@ static inline u64 atomic64_read(const atomic64_t *v) * * Atomically adds @i to @v. */ -static inline void atomic64_add(u64 i, atomic64_t *v) +static inline void atomic64_add(long long i, atomic64_t *v) { _atomic64_xchg_add(&v->counter, i); } @@ -120,7 +120,7 @@ static inline void atomic64_add(u64 i, atomic64_t *v) * * Atomically adds @i to @v and returns @i + @v */ -static inline u64 atomic64_add_return(u64 i, atomic64_t *v) +static inline long long atomic64_add_return(long long i, atomic64_t *v) { smp_mb(); /* barrier for proper semantics */ return _atomic64_xchg_add(&v->counter, i) + i; @@ -135,7 +135,8 @@ static inline u64 atomic64_add_return(u64 i, atomic64_t *v) * Atomically adds @a to @v, so long as @v was not already @u. * Returns non-zero if @v was not @u, and zero otherwise. */ -static inline u64 atomic64_add_unless(atomic64_t *v, u64 a, u64 u) +static inline long long atomic64_add_unless(atomic64_t *v, long long a, + long long u) { smp_mb(); /* barrier for proper semantics */ return _atomic64_xchg_add_unless(&v->counter, a, u) != u; @@ -151,7 +152,7 @@ static inline u64 atomic64_add_unless(atomic64_t *v, u64 a, u64 u) * atomic64_set() can't be just a raw store, since it would be lost if it * fell between the load and store of one of the other atomic ops. */ -static inline void atomic64_set(atomic64_t *v, u64 n) +static inline void atomic64_set(atomic64_t *v, long long n) { _atomic64_xchg(&v->counter, n); } @@ -236,11 +237,13 @@ extern struct __get_user __atomic_xchg_add_unless(volatile int *p, extern struct __get_user __atomic_or(volatile int *p, int *lock, int n); extern struct __get_user __atomic_andn(volatile int *p, int *lock, int n); extern struct __get_user __atomic_xor(volatile int *p, int *lock, int n); -extern u64 __atomic64_cmpxchg(volatile u64 *p, int *lock, u64 o, u64 n); -extern u64 __atomic64_xchg(volatile u64 *p, int *lock, u64 n); -extern u64 __atomic64_xchg_add(volatile u64 *p, int *lock, u64 n); -extern u64 __atomic64_xchg_add_unless(volatile u64 *p, - int *lock, u64 o, u64 n); +extern long long __atomic64_cmpxchg(volatile long long *p, int *lock, + long long o, long long n); +extern long long __atomic64_xchg(volatile long long *p, int *lock, long long n); +extern long long __atomic64_xchg_add(volatile long long *p, int *lock, + long long n); +extern long long __atomic64_xchg_add_unless(volatile long long *p, + int *lock, long long o, long long n); /* Return failure from the atomic wrappers. */ struct __get_user __atomic_bad_address(int __user *addr); diff --git a/arch/tile/include/asm/cmpxchg.h b/arch/tile/include/asm/cmpxchg.h index 4001d5eab4bb..0ccda3c425be 100644 --- a/arch/tile/include/asm/cmpxchg.h +++ b/arch/tile/include/asm/cmpxchg.h @@ -35,10 +35,10 @@ int _atomic_xchg(int *ptr, int n); int _atomic_xchg_add(int *v, int i); int _atomic_xchg_add_unless(int *v, int a, int u); int _atomic_cmpxchg(int *ptr, int o, int n); -u64 _atomic64_xchg(u64 *v, u64 n); -u64 _atomic64_xchg_add(u64 *v, u64 i); -u64 _atomic64_xchg_add_unless(u64 *v, u64 a, u64 u); -u64 _atomic64_cmpxchg(u64 *v, u64 o, u64 n); +long long _atomic64_xchg(long long *v, long long n); +long long _atomic64_xchg_add(long long *v, long long i); +long long _atomic64_xchg_add_unless(long long *v, long long a, long long u); +long long _atomic64_cmpxchg(long long *v, long long o, long long n); #define xchg(ptr, n) \ ({ \ @@ -53,7 +53,8 @@ u64 _atomic64_cmpxchg(u64 *v, u64 o, u64 n); if (sizeof(*(ptr)) != 4) \ __cmpxchg_called_with_bad_pointer(); \ smp_mb(); \ - (typeof(*(ptr)))_atomic_cmpxchg((int *)ptr, (int)o, (int)n); \ + (typeof(*(ptr)))_atomic_cmpxchg((int *)ptr, (int)o, \ + (int)n); \ }) #define xchg64(ptr, n) \ @@ -61,7 +62,8 @@ u64 _atomic64_cmpxchg(u64 *v, u64 o, u64 n); if (sizeof(*(ptr)) != 8) \ __xchg_called_with_bad_pointer(); \ smp_mb(); \ - (typeof(*(ptr)))_atomic64_xchg((u64 *)(ptr), (u64)(n)); \ + (typeof(*(ptr)))_atomic64_xchg((long long *)(ptr), \ + (long long)(n)); \ }) #define cmpxchg64(ptr, o, n) \ @@ -69,7 +71,8 @@ u64 _atomic64_cmpxchg(u64 *v, u64 o, u64 n); if (sizeof(*(ptr)) != 8) \ __cmpxchg_called_with_bad_pointer(); \ smp_mb(); \ - (typeof(*(ptr)))_atomic64_cmpxchg((u64 *)ptr, (u64)o, (u64)n); \ + (typeof(*(ptr)))_atomic64_cmpxchg((long long *)ptr, \ + (long long)o, (long long)n); \ }) #else @@ -81,10 +84,11 @@ u64 _atomic64_cmpxchg(u64 *v, u64 o, u64 n); switch (sizeof(*(ptr))) { \ case 4: \ __x = (typeof(__x))(unsigned long) \ - __insn_exch4((ptr), (u32)(unsigned long)(n)); \ + __insn_exch4((ptr), \ + (u32)(unsigned long)(n)); \ break; \ case 8: \ - __x = (typeof(__x)) \ + __x = (typeof(__x)) \ __insn_exch((ptr), (unsigned long)(n)); \ break; \ default: \ @@ -103,10 +107,12 @@ u64 _atomic64_cmpxchg(u64 *v, u64 o, u64 n); switch (sizeof(*(ptr))) { \ case 4: \ __x = (typeof(__x))(unsigned long) \ - __insn_cmpexch4((ptr), (u32)(unsigned long)(n)); \ + __insn_cmpexch4((ptr), \ + (u32)(unsigned long)(n)); \ break; \ case 8: \ - __x = (typeof(__x))__insn_cmpexch((ptr), (u64)(n)); \ + __x = (typeof(__x))__insn_cmpexch((ptr), \ + (long long)(n)); \ break; \ default: \ __cmpxchg_called_with_bad_pointer(); \ diff --git a/arch/tile/lib/atomic_32.c b/arch/tile/lib/atomic_32.c index 759efa337be8..c89b211fd9e7 100644 --- a/arch/tile/lib/atomic_32.c +++ b/arch/tile/lib/atomic_32.c @@ -107,19 +107,19 @@ unsigned long _atomic_xor(volatile unsigned long *p, unsigned long mask) EXPORT_SYMBOL(_atomic_xor); -u64 _atomic64_xchg(u64 *v, u64 n) +long long _atomic64_xchg(long long *v, long long n) { return __atomic64_xchg(v, __atomic_setup(v), n); } EXPORT_SYMBOL(_atomic64_xchg); -u64 _atomic64_xchg_add(u64 *v, u64 i) +long long _atomic64_xchg_add(long long *v, long long i) { return __atomic64_xchg_add(v, __atomic_setup(v), i); } EXPORT_SYMBOL(_atomic64_xchg_add); -u64 _atomic64_xchg_add_unless(u64 *v, u64 a, u64 u) +long long _atomic64_xchg_add_unless(long long *v, long long a, long long u) { /* * Note: argument order is switched here since it is easier @@ -130,7 +130,7 @@ u64 _atomic64_xchg_add_unless(u64 *v, u64 a, u64 u) } EXPORT_SYMBOL(_atomic64_xchg_add_unless); -u64 _atomic64_cmpxchg(u64 *v, u64 o, u64 n) +long long _atomic64_cmpxchg(long long *v, long long o, long long n) { return __atomic64_cmpxchg(v, __atomic_setup(v), o, n); } From dd386e03d9753889dc3ea3eed91ad3729df08819 Mon Sep 17 00:00:00 2001 From: Henrik Austad Date: Wed, 25 Sep 2013 16:16:40 +0200 Subject: [PATCH 190/459] tile: change lock initalization in hardwall hardwall used __SPIN_LOCK_INITIALIZER directly instead of the preferred __SPIN_LOCK_UNLOCKED. This also has the benefit that it will compile when applying the preempt-rt patch series. Signed-off-by: Henrik Austad Signed-off-by: Chris Metcalf --- arch/tile/kernel/hardwall.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/tile/kernel/hardwall.c b/arch/tile/kernel/hardwall.c index df27a1fd94a3..531f4c365351 100644 --- a/arch/tile/kernel/hardwall.c +++ b/arch/tile/kernel/hardwall.c @@ -66,7 +66,7 @@ static struct hardwall_type hardwall_types[] = { 0, "udn", LIST_HEAD_INIT(hardwall_types[HARDWALL_UDN].list), - __SPIN_LOCK_INITIALIZER(hardwall_types[HARDWALL_UDN].lock), + __SPIN_LOCK_UNLOCKED(hardwall_types[HARDWALL_UDN].lock), NULL }, #ifndef __tilepro__ @@ -77,7 +77,7 @@ static struct hardwall_type hardwall_types[] = { 1, /* disabled pending hypervisor support */ "idn", LIST_HEAD_INIT(hardwall_types[HARDWALL_IDN].list), - __SPIN_LOCK_INITIALIZER(hardwall_types[HARDWALL_IDN].lock), + __SPIN_LOCK_UNLOCKED(hardwall_types[HARDWALL_IDN].lock), NULL }, { /* access to user-space IPI */ @@ -87,7 +87,7 @@ static struct hardwall_type hardwall_types[] = { 0, "ipi", LIST_HEAD_INIT(hardwall_types[HARDWALL_IPI].list), - __SPIN_LOCK_INITIALIZER(hardwall_types[HARDWALL_IPI].lock), + __SPIN_LOCK_UNLOCKED(hardwall_types[HARDWALL_IPI].lock), NULL }, #endif From 3f725c5b924e14eb00c58892d21d92100121e5ce Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 26 Sep 2013 13:22:40 -0400 Subject: [PATCH 191/459] tile: ensure interrupts disabled for preempt_schedule_irq() When coming from a page fault (for example), interrupts might be enabled as we enter the code to return from interrupt. Cc: stable@vger.kernel.org Signed-off-by: Chris Metcalf --- arch/tile/kernel/intvec_32.S | 3 +++ arch/tile/kernel/intvec_64.S | 3 +++ 2 files changed, 6 insertions(+) diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S index 088d5c141e68..2cbe6d5dd6b0 100644 --- a/arch/tile/kernel/intvec_32.S +++ b/arch/tile/kernel/intvec_32.S @@ -815,6 +815,9 @@ STD_ENTRY(interrupt_return) } bzt r28, 1f bnz r29, 1f + /* Disable interrupts explicitly for preemption. */ + IRQ_DISABLE(r20,r21) + TRACE_IRQS_OFF jal preempt_schedule_irq FEEDBACK_REENTER(interrupt_return) 1: diff --git a/arch/tile/kernel/intvec_64.S b/arch/tile/kernel/intvec_64.S index ec755d3f3734..b8fc497f2437 100644 --- a/arch/tile/kernel/intvec_64.S +++ b/arch/tile/kernel/intvec_64.S @@ -841,6 +841,9 @@ STD_ENTRY(interrupt_return) } beqzt r28, 1f bnez r29, 1f + /* Disable interrupts explicitly for preemption. */ + IRQ_DISABLE(r20,r21) + TRACE_IRQS_OFF jal preempt_schedule_irq FEEDBACK_REENTER(interrupt_return) 1: From 2bd161a605f1f84a5fc8a4fe8410113a94f79355 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 27 Sep 2013 13:46:04 -0700 Subject: [PATCH 192/459] sparc64: Fix buggy strlcpy() conversion in ldom_reboot(). Commit 117a0c5fc9c2d06045bd217385b2b39ea426b5a6 ("sparc: kernel: using strlcpy() instead of strcpy()") added a bug to ldom_reboot in arch/sparc/kernel/ds.c - strcpy(full_boot_str + strlen("boot "), boot_command); + strlcpy(full_boot_str + strlen("boot "), boot_command, + sizeof(full_boot_str + strlen("boot "))); That last sizeof() expression evaluates to sizeof(size_t) which is not what was intended. Also even the corrected: sizeof(full_boot_str) + strlen("boot ") is not right as the destination buffer length is just plain "sizeof(full_boot_str)" and that's what the final argument should be. Signed-off-by: David S. Miller --- arch/sparc/kernel/ds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c index 62d6b153ffa2..4d9ac8406f32 100644 --- a/arch/sparc/kernel/ds.c +++ b/arch/sparc/kernel/ds.c @@ -851,7 +851,7 @@ void ldom_reboot(const char *boot_command) strcpy(full_boot_str, "boot "); strlcpy(full_boot_str + strlen("boot "), boot_command, - sizeof(full_boot_str + strlen("boot "))); + sizeof(full_boot_str)); len = strlen(full_boot_str); if (reboot_data_supported) { From b54881f9949e4eac6ff23c86625467a365085bd6 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 27 Sep 2013 15:17:04 -0500 Subject: [PATCH 193/459] be2net: Fix to prevent Tx stall on SH-R when packet size < 32 Tx on SH-R can lockup if the packet size is less than 32 bytes. Pad such packets to a safer 36-byte size. Patch uses the Lancer-R workaround - which checks for packet <= 32-bytes Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 100b528b9bd0..31fa13bc9eed 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -855,11 +855,11 @@ static struct sk_buff *be_xmit_workarounds(struct be_adapter *adapter, unsigned int eth_hdr_len; struct iphdr *ip; - /* Lancer ASIC has a bug wherein packets that are 32 bytes or less + /* Lancer, SH-R ASICs have a bug wherein Packets that are 32 bytes or less * may cause a transmit stall on that port. So the work-around is to - * pad such packets to a 36-byte length. + * pad short packets (<= 32 bytes) to a 36-byte length. */ - if (unlikely(lancer_chip(adapter) && skb->len <= 32)) { + if (unlikely(!BEx_chip(adapter) && skb->len <= 32)) { if (skb_padto(skb, 36)) goto tx_drop; skb->len = 36; From d44517fde6d0f40c2678ae9540115ec80cc90a46 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 27 Sep 2013 15:17:31 -0500 Subject: [PATCH 194/459] be2net: Fix the size of be_nic_res_desc structure Size of be_nic_res_desc structure is incorrect. Fix it. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h index d026226db88c..51a93bd4d4c0 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.h +++ b/drivers/net/ethernet/emulex/benet/be_cmds.h @@ -1791,7 +1791,7 @@ struct be_nic_res_desc { u8 acpi_params; u8 wol_param; u16 rsvd7; - u32 rsvd8[3]; + u32 rsvd8[7]; } __packed; struct be_cmd_req_get_func_config { From d9d604f865ea82a6d344871c76f4a01cbb0b2b0f Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 27 Sep 2013 15:17:58 -0500 Subject: [PATCH 195/459] be2net: Fix VLAN promiscuous mode programming When the interface runs out of the allocated entries in VLAN table, we program the interface in VLAN promiscuous mode. Use OPCODE_COMMON_NTWK_RX_FILTER to set VLAN Promiscuous mode instead of OPCODE_COMMON_NTWK_VLAN_CONFIG. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 1 + drivers/net/ethernet/emulex/benet/be_cmds.c | 9 ++++++ drivers/net/ethernet/emulex/benet/be_cmds.h | 2 ++ drivers/net/ethernet/emulex/benet/be_main.c | 34 +++++++++++++++++---- 4 files changed, 40 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index ace5050dba38..95d303d2da94 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -333,6 +333,7 @@ enum vf_state { #define BE_FLAGS_LINK_STATUS_INIT 1 #define BE_FLAGS_WORKER_SCHEDULED (1 << 3) +#define BE_FLAGS_VLAN_PROMISC (1 << 4) #define BE_FLAGS_NAPI_ENABLED (1 << 9) #define BE_UC_PMAC_COUNT 30 #define BE_VF_UC_PMAC_COUNT 2 diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 1ab5dab11eff..bd0e0c0bbcd8 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -180,6 +180,9 @@ static int be_mcc_compl_process(struct be_adapter *adapter, dev_err(&adapter->pdev->dev, "opcode %d-%d failed:status %d-%d\n", opcode, subsystem, compl_status, extd_status); + + if (extd_status == MCC_ADDL_STS_INSUFFICIENT_RESOURCES) + return extd_status; } } done: @@ -1812,6 +1815,12 @@ int be_cmd_rx_filter(struct be_adapter *adapter, u32 flags, u32 value) } else if (flags & IFF_ALLMULTI) { req->if_flags_mask = req->if_flags = cpu_to_le32(BE_IF_FLAGS_MCAST_PROMISCUOUS); + } else if (flags & BE_FLAGS_VLAN_PROMISC) { + req->if_flags_mask = cpu_to_le32(BE_IF_FLAGS_VLAN_PROMISCUOUS); + + if (value == ON) + req->if_flags = + cpu_to_le32(BE_IF_FLAGS_VLAN_PROMISCUOUS); } else { struct netdev_hw_addr *ha; int i = 0; diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h index 51a93bd4d4c0..108ca8abf0af 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.h +++ b/drivers/net/ethernet/emulex/benet/be_cmds.h @@ -60,6 +60,8 @@ enum { MCC_STATUS_NOT_SUPPORTED = 66 }; +#define MCC_ADDL_STS_INSUFFICIENT_RESOURCES 0x16 + #define CQE_STATUS_COMPL_MASK 0xFFFF #define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */ #define CQE_STATUS_EXTD_MASK 0xFFFF diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 31fa13bc9eed..036f5830fee4 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1013,18 +1013,40 @@ static int be_vid_config(struct be_adapter *adapter) status = be_cmd_vlan_config(adapter, adapter->if_handle, vids, num, 1, 0); - /* Set to VLAN promisc mode as setting VLAN filter failed */ if (status) { - dev_info(&adapter->pdev->dev, "Exhausted VLAN HW filters.\n"); - dev_info(&adapter->pdev->dev, "Disabling HW VLAN filtering.\n"); - goto set_vlan_promisc; + /* Set to VLAN promisc mode as setting VLAN filter failed */ + if (status == MCC_ADDL_STS_INSUFFICIENT_RESOURCES) + goto set_vlan_promisc; + dev_err(&adapter->pdev->dev, + "Setting HW VLAN filtering failed.\n"); + } else { + if (adapter->flags & BE_FLAGS_VLAN_PROMISC) { + /* hw VLAN filtering re-enabled. */ + status = be_cmd_rx_filter(adapter, + BE_FLAGS_VLAN_PROMISC, OFF); + if (!status) { + dev_info(&adapter->pdev->dev, + "Disabling VLAN Promiscuous mode.\n"); + adapter->flags &= ~BE_FLAGS_VLAN_PROMISC; + dev_info(&adapter->pdev->dev, + "Re-Enabling HW VLAN filtering\n"); + } + } } return status; set_vlan_promisc: - status = be_cmd_vlan_config(adapter, adapter->if_handle, - NULL, 0, 1, 1); + dev_warn(&adapter->pdev->dev, "Exhausted VLAN HW filters.\n"); + + status = be_cmd_rx_filter(adapter, BE_FLAGS_VLAN_PROMISC, ON); + if (!status) { + dev_info(&adapter->pdev->dev, "Enable VLAN Promiscuous mode\n"); + dev_info(&adapter->pdev->dev, "Disabling HW VLAN filtering\n"); + adapter->flags |= BE_FLAGS_VLAN_PROMISC; + } else + dev_err(&adapter->pdev->dev, + "Failed to enable VLAN Promiscuous mode.\n"); return status; } From 1aa9673c209e5701d7226e9389349b53fa560536 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 27 Sep 2013 15:18:16 -0500 Subject: [PATCH 196/459] be2net: Fix number of VLANs supported in UMC mode for BE3-R. In BE3-R, when UMC is enabled, the number of VLANs that can be added to the interface is reduced to 15. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 1 + drivers/net/ethernet/emulex/benet/be_main.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index 95d303d2da94..db020230bd0b 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -88,6 +88,7 @@ static inline char *nic_name(struct pci_dev *pdev) #define BE_MIN_MTU 256 #define BE_NUM_VLANS_SUPPORTED 64 +#define BE_UMC_NUM_VLANS_SUPPORTED 15 #define BE_MAX_EQD 96u #define BE_MAX_TX_FRAG_COUNT 30 diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 036f5830fee4..2962d2ff9f1c 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2985,6 +2985,8 @@ static void BEx_get_resources(struct be_adapter *adapter, if (adapter->function_mode & FLEX10_MODE) res->max_vlans = BE_NUM_VLANS_SUPPORTED/8; + else if (adapter->function_mode & UMC_ENABLED) + res->max_vlans = BE_UMC_NUM_VLANS_SUPPORTED; else res->max_vlans = BE_NUM_VLANS_SUPPORTED; res->max_mcast_mac = BE_MAX_MC; From 45c459739e849b5a26a4b9a552460b1e601a32fc Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 27 Sep 2013 15:18:28 -0500 Subject: [PATCH 197/459] be2net: Fix to allow VLAN configuration on VF interfaces. Now the VF interfaces have privilege to add VLANs. Allow VLANs to be configured on these interfaces. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 2962d2ff9f1c..9c25607e5f58 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1055,10 +1055,6 @@ static int be_vlan_add_vid(struct net_device *netdev, __be16 proto, u16 vid) struct be_adapter *adapter = netdev_priv(netdev); int status = 0; - if (!lancer_chip(adapter) && !be_physfn(adapter)) { - status = -EINVAL; - goto ret; - } /* Packets with VID 0 are always received by Lancer by default */ if (lancer_chip(adapter) && vid == 0) @@ -1081,11 +1077,6 @@ static int be_vlan_rem_vid(struct net_device *netdev, __be16 proto, u16 vid) struct be_adapter *adapter = netdev_priv(netdev); int status = 0; - if (!lancer_chip(adapter) && !be_physfn(adapter)) { - status = -EINVAL; - goto ret; - } - /* Packets with VID 0 are always received by Lancer by default */ if (lancer_chip(adapter) && vid == 0) goto ret; From b9fc0e53b093ed74268c25731e4b9ac9cf2db5f1 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 27 Sep 2013 15:18:46 -0500 Subject: [PATCH 198/459] be2net: Fix to configure VLAN priority for a VF interface. Thix fix allows the VLAN priority to be configured for a VF interface via the "ip link set DEVICE vf NUM" path. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 9c25607e5f58..ad593cabeed3 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1212,28 +1212,29 @@ static int be_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos) { struct be_adapter *adapter = netdev_priv(netdev); + struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; int status = 0; if (!sriov_enabled(adapter)) return -EPERM; - if (vf >= adapter->num_vfs || vlan > 4095) + if (vf >= adapter->num_vfs || vlan > 4095 || qos > 7) return -EINVAL; - if (vlan) { - if (adapter->vf_cfg[vf].vlan_tag != vlan) { + if (vlan || qos) { + vlan |= qos << VLAN_PRIO_SHIFT; + if (vf_cfg->vlan_tag != vlan) { /* If this is new value, program it. Else skip. */ - adapter->vf_cfg[vf].vlan_tag = vlan; - - status = be_cmd_set_hsw_config(adapter, vlan, - vf + 1, adapter->vf_cfg[vf].if_handle, 0); + vf_cfg->vlan_tag = vlan; + status = be_cmd_set_hsw_config(adapter, vlan, vf + 1, + vf_cfg->if_handle, 0); } } else { /* Reset Transparent Vlan Tagging. */ - adapter->vf_cfg[vf].vlan_tag = 0; - vlan = adapter->vf_cfg[vf].def_vid; + vf_cfg->vlan_tag = 0; + vlan = vf_cfg->def_vid; status = be_cmd_set_hsw_config(adapter, vlan, vf + 1, - adapter->vf_cfg[vf].if_handle, 0); + vf_cfg->if_handle, 0); } From a60b3a13ab2b5823bd66c7fa14e3f88753479e35 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 27 Sep 2013 15:18:56 -0500 Subject: [PATCH 199/459] be2net: Fix to display the VLAN priority for a VF VLAN priority is not being displayed for a VF currently when user executes "ip link show" command. This patch fixes it. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index ad593cabeed3..2c38cc402119 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1201,8 +1201,8 @@ static int be_get_vf_config(struct net_device *netdev, int vf, vi->vf = vf; vi->tx_rate = vf_cfg->tx_rate; - vi->vlan = vf_cfg->vlan_tag; - vi->qos = 0; + vi->vlan = vf_cfg->vlan_tag & VLAN_VID_MASK; + vi->qos = vf_cfg->vlan_tag >> VLAN_PRIO_SHIFT; memcpy(&vi->mac, vf_cfg->mac_addr, ETH_ALEN); return 0; From 6645161513b90823ddc787f5763d8dbea7d40c8c Mon Sep 17 00:00:00 2001 From: Sucheta Chakraborty Date: Fri, 27 Sep 2013 02:12:36 -0400 Subject: [PATCH 200/459] qlcnic: Fix register device in FAILED state for 82xx. o Commit 7e2cf4feba058476324dc545e3d1b316998c91e6 ("qlcnic: change driver hardware interface mechanism") has overwritten commit b43e5ee76a4320c070cf0fe65cf4927198fbb4d1 ("qlcnic: Register device in FAILED state") Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- .../ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 8 ++++ .../net/ethernet/qlogic/qlcnic/qlcnic_main.c | 39 ++++++++++++++++++- .../net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c | 12 ++++++ 3 files changed, 57 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 4d7ad0074d1c..ebe4c86e5230 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -1794,3 +1794,11 @@ const struct ethtool_ops qlcnic_sriov_vf_ethtool_ops = { .set_msglevel = qlcnic_set_msglevel, .get_msglevel = qlcnic_get_msglevel, }; + +const struct ethtool_ops qlcnic_ethtool_failed_ops = { + .get_settings = qlcnic_get_settings, + .get_drvinfo = qlcnic_get_drvinfo, + .set_msglevel = qlcnic_set_msglevel, + .get_msglevel = qlcnic_get_msglevel, + .set_dump = qlcnic_set_dump, +}; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index c4c5023e1fdf..21d00a0449a1 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -431,6 +431,9 @@ static void qlcnic_82xx_cancel_idc_work(struct qlcnic_adapter *adapter) while (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) usleep_range(10000, 11000); + if (!adapter->fw_work.work.func) + return; + cancel_delayed_work_sync(&adapter->fw_work); } @@ -2275,8 +2278,9 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->portnum = adapter->ahw->pci_func; err = qlcnic_start_firmware(adapter); if (err) { - dev_err(&pdev->dev, "Loading fw failed.Please Reboot\n"); - goto err_out_free_hw; + dev_err(&pdev->dev, "Loading fw failed.Please Reboot\n" + "\t\tIf reboot doesn't help, try flashing the card\n"); + goto err_out_maintenance_mode; } qlcnic_get_multiq_capability(adapter); @@ -2408,6 +2412,22 @@ err_out_disable_pdev: pci_set_drvdata(pdev, NULL); pci_disable_device(pdev); return err; + +err_out_maintenance_mode: + netdev->netdev_ops = &qlcnic_netdev_failed_ops; + SET_ETHTOOL_OPS(netdev, &qlcnic_ethtool_failed_ops); + err = register_netdev(netdev); + + if (err) { + dev_err(&pdev->dev, "Failed to register net device\n"); + qlcnic_clr_all_drv_state(adapter, 0); + goto err_out_free_hw; + } + + pci_set_drvdata(pdev, adapter); + qlcnic_add_sysfs(adapter); + + return 0; } static void qlcnic_remove(struct pci_dev *pdev) @@ -2518,8 +2538,16 @@ static int qlcnic_resume(struct pci_dev *pdev) static int qlcnic_open(struct net_device *netdev) { struct qlcnic_adapter *adapter = netdev_priv(netdev); + u32 state; int err; + state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); + if (state == QLCNIC_DEV_FAILED || state == QLCNIC_DEV_BADBAD) { + netdev_err(netdev, "%s: Device is in FAILED state\n", __func__); + + return -EIO; + } + netif_carrier_off(netdev); err = qlcnic_attach(adapter); @@ -3228,6 +3256,13 @@ void qlcnic_82xx_dev_request_reset(struct qlcnic_adapter *adapter, u32 key) return; state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); + if (state == QLCNIC_DEV_FAILED || state == QLCNIC_DEV_BADBAD) { + netdev_err(adapter->netdev, "%s: Device is in FAILED state\n", + __func__); + qlcnic_api_unlock(adapter); + + return; + } if (state == QLCNIC_DEV_READY) { QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DEV_STATE, diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c index c6165d05cc13..019f4377307f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c @@ -1272,6 +1272,7 @@ void qlcnic_remove_sysfs_entries(struct qlcnic_adapter *adapter) void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter) { struct device *dev = &adapter->pdev->dev; + u32 state; if (device_create_bin_file(dev, &bin_attr_port_stats)) dev_info(dev, "failed to create port stats sysfs entry"); @@ -1285,8 +1286,13 @@ void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter) if (device_create_bin_file(dev, &bin_attr_mem)) dev_info(dev, "failed to create mem sysfs entry\n"); + state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); + if (state == QLCNIC_DEV_FAILED || state == QLCNIC_DEV_BADBAD) + return; + if (device_create_bin_file(dev, &bin_attr_pci_config)) dev_info(dev, "failed to create pci config sysfs entry"); + if (device_create_file(dev, &dev_attr_beacon)) dev_info(dev, "failed to create beacon sysfs entry"); @@ -1307,6 +1313,7 @@ void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter) void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter) { struct device *dev = &adapter->pdev->dev; + u32 state; device_remove_bin_file(dev, &bin_attr_port_stats); @@ -1315,6 +1322,11 @@ void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter) device_remove_file(dev, &dev_attr_diag_mode); device_remove_bin_file(dev, &bin_attr_crb); device_remove_bin_file(dev, &bin_attr_mem); + + state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); + if (state == QLCNIC_DEV_FAILED || state == QLCNIC_DEV_BADBAD) + return; + device_remove_bin_file(dev, &bin_attr_pci_config); device_remove_file(dev, &dev_attr_beacon); if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED)) From d3789c3ee2e2b7e8c9b6043e9e8715d6d1e80299 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 24 Sep 2013 12:49:00 +0100 Subject: [PATCH 201/459] iio: amplifiers: ad8366: Remove regulator_put Since devm_regulator_get is used, regulator_put should not be used. Remove it. Signed-off-by: Sachin Kamat Signed-off-by: Jonathan Cameron --- drivers/iio/amplifiers/ad8366.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/iio/amplifiers/ad8366.c b/drivers/iio/amplifiers/ad8366.c index d0a79a4bce1c..ba6f6a91dfff 100644 --- a/drivers/iio/amplifiers/ad8366.c +++ b/drivers/iio/amplifiers/ad8366.c @@ -185,10 +185,8 @@ static int ad8366_remove(struct spi_device *spi) iio_device_unregister(indio_dev); - if (!IS_ERR(reg)) { + if (!IS_ERR(reg)) regulator_disable(reg); - regulator_put(reg); - } return 0; } From 60e453a940ac678565b6641d65f8c18541bb9f28 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Mon, 23 Sep 2013 20:59:35 +0800 Subject: [PATCH 202/459] USBNET: fix handling padding packet Commit 638c5115a7949(USBNET: support DMA SG) introduces DMA SG if the usb host controller is capable of building packet from discontinuous buffers, but missed handling padding packet when building DMA SG. This patch attachs the pre-allocated padding packet at the end of the sg list, so padding packet can be sent to device if drivers require that. Reported-by: David Laight Acked-by: Oliver Neukum Signed-off-by: Ming Lei Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 27 +++++++++++++++++++++------ include/linux/usb/usbnet.h | 1 + 2 files changed, 22 insertions(+), 6 deletions(-) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 7b331e613e02..bf94e10a37c8 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1241,7 +1241,9 @@ static int build_dma_sg(const struct sk_buff *skb, struct urb *urb) if (num_sgs == 1) return 0; - urb->sg = kmalloc(num_sgs * sizeof(struct scatterlist), GFP_ATOMIC); + /* reserve one for zero packet */ + urb->sg = kmalloc((num_sgs + 1) * sizeof(struct scatterlist), + GFP_ATOMIC); if (!urb->sg) return -ENOMEM; @@ -1305,7 +1307,7 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, if (build_dma_sg(skb, urb) < 0) goto drop; } - entry->length = length = urb->transfer_buffer_length; + length = urb->transfer_buffer_length; /* don't assume the hardware handles USB_ZERO_PACKET * NOTE: strictly conforming cdc-ether devices should expect @@ -1317,15 +1319,18 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, if (length % dev->maxpacket == 0) { if (!(info->flags & FLAG_SEND_ZLP)) { if (!(info->flags & FLAG_MULTI_PACKET)) { - urb->transfer_buffer_length++; - if (skb_tailroom(skb)) { + length++; + if (skb_tailroom(skb) && !urb->num_sgs) { skb->data[skb->len] = 0; __skb_put(skb, 1); - } + } else if (urb->num_sgs) + sg_set_buf(&urb->sg[urb->num_sgs++], + dev->padding_pkt, 1); } } else urb->transfer_flags |= URB_ZERO_PACKET; } + entry->length = urb->transfer_buffer_length = length; spin_lock_irqsave(&dev->txq.lock, flags); retval = usb_autopm_get_interface_async(dev->intf); @@ -1509,6 +1514,7 @@ void usbnet_disconnect (struct usb_interface *intf) usb_kill_urb(dev->interrupt); usb_free_urb(dev->interrupt); + kfree(dev->padding_pkt); free_netdev(net); } @@ -1679,9 +1685,16 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) /* initialize max rx_qlen and tx_qlen */ usbnet_update_max_qlen(dev); + if (dev->can_dma_sg && !(info->flags & FLAG_SEND_ZLP) && + !(info->flags & FLAG_MULTI_PACKET)) { + dev->padding_pkt = kzalloc(1, GFP_KERNEL); + if (!dev->padding_pkt) + goto out4; + } + status = register_netdev (net); if (status) - goto out4; + goto out5; netif_info(dev, probe, dev->net, "register '%s' at usb-%s-%s, %s, %pM\n", udev->dev.driver->name, @@ -1699,6 +1712,8 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) return 0; +out5: + kfree(dev->padding_pkt); out4: usb_free_urb(dev->interrupt); out3: diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 9cb2fe8ca944..e303eef94dd5 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -42,6 +42,7 @@ struct usbnet { struct usb_host_endpoint *status; unsigned maxpacket; struct timer_list delay; + const char *padding_pkt; /* protocol/interface state */ struct net_device *net; From 7df37ff33dc122f7bd0614d707939fe84322d264 Mon Sep 17 00:00:00 2001 From: "Catalin\\(ux\\) M. BOIE" Date: Mon, 23 Sep 2013 23:04:19 +0300 Subject: [PATCH 203/459] IPv6 NAT: Do not drop DNATed 6to4/6rd packets When a router is doing DNAT for 6to4/6rd packets the latest anti-spoofing commit 218774dc ("ipv6: add anti-spoofing checks for 6to4 and 6rd") will drop them because the IPv6 address embedded does not match the IPv4 destination. This patch will allow them to pass by testing if we have an address that matches on 6to4/6rd interface. I have been hit by this problem using Fedora and IPV6TO4_IPV4ADDR. Also, log the dropped packets (with rate limit). Signed-off-by: Catalin(ux) M. BOIE Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- include/net/addrconf.h | 4 ++ net/ipv6/addrconf.c | 27 ++++++++++++++ net/ipv6/sit.c | 84 ++++++++++++++++++++++++++++++++++-------- 3 files changed, 100 insertions(+), 15 deletions(-) diff --git a/include/net/addrconf.h b/include/net/addrconf.h index fb314de2b61b..86505bfa5d2c 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -67,6 +67,10 @@ int ipv6_chk_addr(struct net *net, const struct in6_addr *addr, int ipv6_chk_home_addr(struct net *net, const struct in6_addr *addr); #endif +bool ipv6_chk_custom_prefix(const struct in6_addr *addr, + const unsigned int prefix_len, + struct net_device *dev); + int ipv6_chk_prefix(const struct in6_addr *addr, struct net_device *dev); struct inet6_ifaddr *ipv6_get_ifaddr(struct net *net, diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index d6ff12617f36..a0c3abe72461 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1499,6 +1499,33 @@ static bool ipv6_chk_same_addr(struct net *net, const struct in6_addr *addr, return false; } +/* Compares an address/prefix_len with addresses on device @dev. + * If one is found it returns true. + */ +bool ipv6_chk_custom_prefix(const struct in6_addr *addr, + const unsigned int prefix_len, struct net_device *dev) +{ + struct inet6_dev *idev; + struct inet6_ifaddr *ifa; + bool ret = false; + + rcu_read_lock(); + idev = __in6_dev_get(dev); + if (idev) { + read_lock_bh(&idev->lock); + list_for_each_entry(ifa, &idev->addr_list, if_list) { + ret = ipv6_prefix_equal(addr, &ifa->addr, prefix_len); + if (ret) + break; + } + read_unlock_bh(&idev->lock); + } + rcu_read_unlock(); + + return ret; +} +EXPORT_SYMBOL(ipv6_chk_custom_prefix); + int ipv6_chk_prefix(const struct in6_addr *addr, struct net_device *dev) { struct inet6_dev *idev; diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 7ee5cb96db34..afd5605aea7c 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -566,6 +566,70 @@ static inline bool is_spoofed_6rd(struct ip_tunnel *tunnel, const __be32 v4addr, return false; } +/* Checks if an address matches an address on the tunnel interface. + * Used to detect the NAT of proto 41 packets and let them pass spoofing test. + * Long story: + * This function is called after we considered the packet as spoofed + * in is_spoofed_6rd. + * We may have a router that is doing NAT for proto 41 packets + * for an internal station. Destination a.a.a.a/PREFIX:bbbb:bbbb + * will be translated to n.n.n.n/PREFIX:bbbb:bbbb. And is_spoofed_6rd + * function will return true, dropping the packet. + * But, we can still check if is spoofed against the IP + * addresses associated with the interface. + */ +static bool only_dnatted(const struct ip_tunnel *tunnel, + const struct in6_addr *v6dst) +{ + int prefix_len; + +#ifdef CONFIG_IPV6_SIT_6RD + prefix_len = tunnel->ip6rd.prefixlen + 32 + - tunnel->ip6rd.relay_prefixlen; +#else + prefix_len = 48; +#endif + return ipv6_chk_custom_prefix(v6dst, prefix_len, tunnel->dev); +} + +/* Returns true if a packet is spoofed */ +static bool packet_is_spoofed(struct sk_buff *skb, + const struct iphdr *iph, + struct ip_tunnel *tunnel) +{ + const struct ipv6hdr *ipv6h; + + if (tunnel->dev->priv_flags & IFF_ISATAP) { + if (!isatap_chksrc(skb, iph, tunnel)) + return true; + + return false; + } + + if (tunnel->dev->flags & IFF_POINTOPOINT) + return false; + + ipv6h = ipv6_hdr(skb); + + if (unlikely(is_spoofed_6rd(tunnel, iph->saddr, &ipv6h->saddr))) { + net_warn_ratelimited("Src spoofed %pI4/%pI6c -> %pI4/%pI6c\n", + &iph->saddr, &ipv6h->saddr, + &iph->daddr, &ipv6h->daddr); + return true; + } + + if (likely(!is_spoofed_6rd(tunnel, iph->daddr, &ipv6h->daddr))) + return false; + + if (only_dnatted(tunnel, &ipv6h->daddr)) + return false; + + net_warn_ratelimited("Dst spoofed %pI4/%pI6c -> %pI4/%pI6c\n", + &iph->saddr, &ipv6h->saddr, + &iph->daddr, &ipv6h->daddr); + return true; +} + static int ipip6_rcv(struct sk_buff *skb) { const struct iphdr *iph = ip_hdr(skb); @@ -586,19 +650,9 @@ static int ipip6_rcv(struct sk_buff *skb) IPCB(skb)->flags = 0; skb->protocol = htons(ETH_P_IPV6); - if (tunnel->dev->priv_flags & IFF_ISATAP) { - if (!isatap_chksrc(skb, iph, tunnel)) { - tunnel->dev->stats.rx_errors++; - goto out; - } - } else if (!(tunnel->dev->flags&IFF_POINTOPOINT)) { - if (is_spoofed_6rd(tunnel, iph->saddr, - &ipv6_hdr(skb)->saddr) || - is_spoofed_6rd(tunnel, iph->daddr, - &ipv6_hdr(skb)->daddr)) { - tunnel->dev->stats.rx_errors++; - goto out; - } + if (packet_is_spoofed(skb, iph, tunnel)) { + tunnel->dev->stats.rx_errors++; + goto out; } __skb_tunnel_rx(skb, tunnel->dev, tunnel->net); @@ -748,7 +802,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb, neigh = dst_neigh_lookup(skb_dst(skb), &iph6->daddr); if (neigh == NULL) { - net_dbg_ratelimited("sit: nexthop == NULL\n"); + net_dbg_ratelimited("nexthop == NULL\n"); goto tx_error; } @@ -777,7 +831,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb, neigh = dst_neigh_lookup(skb_dst(skb), &iph6->daddr); if (neigh == NULL) { - net_dbg_ratelimited("sit: nexthop == NULL\n"); + net_dbg_ratelimited("nexthop == NULL\n"); goto tx_error; } From 50624c934db18ab90aaea4908f60dd39aab4e6e5 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Mon, 23 Sep 2013 21:19:49 -0700 Subject: [PATCH 204/459] net: Delay default_device_exit_batch until no devices are unregistering v2 There is currently serialization network namespaces exiting and network devices exiting as the final part of netdev_run_todo does not happen under the rtnl_lock. This is compounded by the fact that the only list of devices unregistering in netdev_run_todo is local to the netdev_run_todo. This lack of serialization in extreme cases results in network devices unregistering in netdev_run_todo after the loopback device of their network namespace has been freed (making dst_ifdown unsafe), and after the their network namespace has exited (making the NETDEV_UNREGISTER, and NETDEV_UNREGISTER_FINAL callbacks unsafe). Add the missing serialization by a per network namespace count of how many network devices are unregistering and having a wait queue that is woken up whenever the count is decreased. The count and wait queue allow default_device_exit_batch to wait until all of the unregistration activity for a network namespace has finished before proceeding to unregister the loopback device and then allowing the network namespace to exit. Only a single global wait queue is used because there is a single global lock, and there is a single waiter, per network namespace wait queues would be a waste of resources. The per network namespace count of unregistering devices gives a progress guarantee because the number of network devices unregistering in an exiting network namespace must ultimately drop to zero (assuming network device unregistration completes). The basic logic remains the same as in v1. This patch is now half comment and half rtnl_lock_unregistering an expanded version of wait_event performs no extra work in the common case where no network devices are unregistering when we get to default_device_exit_batch. Reported-by: Francesco Ruggeri Signed-off-by: "Eric W. Biederman" Signed-off-by: David S. Miller --- include/net/net_namespace.h | 1 + net/core/dev.c | 49 ++++++++++++++++++++++++++++++++++++- 2 files changed, 49 insertions(+), 1 deletion(-) diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index 1313456a0994..9d22f08896c6 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -74,6 +74,7 @@ struct net { struct hlist_head *dev_index_head; unsigned int dev_base_seq; /* protected by rtnl_mutex */ int ifindex; + unsigned int dev_unreg_count; /* core fib_rules */ struct list_head rules_ops; diff --git a/net/core/dev.c b/net/core/dev.c index 5c713f2239cc..65f829cfd928 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -5247,10 +5247,12 @@ static int dev_new_index(struct net *net) /* Delayed registration/unregisteration */ static LIST_HEAD(net_todo_list); +static DECLARE_WAIT_QUEUE_HEAD(netdev_unregistering_wq); static void net_set_todo(struct net_device *dev) { list_add_tail(&dev->todo_list, &net_todo_list); + dev_net(dev)->dev_unreg_count++; } static void rollback_registered_many(struct list_head *head) @@ -5918,6 +5920,12 @@ void netdev_run_todo(void) if (dev->destructor) dev->destructor(dev); + /* Report a network device has been unregistered */ + rtnl_lock(); + dev_net(dev)->dev_unreg_count--; + __rtnl_unlock(); + wake_up(&netdev_unregistering_wq); + /* Free network device */ kobject_put(&dev->dev.kobj); } @@ -6603,6 +6611,34 @@ static void __net_exit default_device_exit(struct net *net) rtnl_unlock(); } +static void __net_exit rtnl_lock_unregistering(struct list_head *net_list) +{ + /* Return with the rtnl_lock held when there are no network + * devices unregistering in any network namespace in net_list. + */ + struct net *net; + bool unregistering; + DEFINE_WAIT(wait); + + for (;;) { + prepare_to_wait(&netdev_unregistering_wq, &wait, + TASK_UNINTERRUPTIBLE); + unregistering = false; + rtnl_lock(); + list_for_each_entry(net, net_list, exit_list) { + if (net->dev_unreg_count > 0) { + unregistering = true; + break; + } + } + if (!unregistering) + break; + __rtnl_unlock(); + schedule(); + } + finish_wait(&netdev_unregistering_wq, &wait); +} + static void __net_exit default_device_exit_batch(struct list_head *net_list) { /* At exit all network devices most be removed from a network @@ -6614,7 +6650,18 @@ static void __net_exit default_device_exit_batch(struct list_head *net_list) struct net *net; LIST_HEAD(dev_kill_list); - rtnl_lock(); + /* To prevent network device cleanup code from dereferencing + * loopback devices or network devices that have been freed + * wait here for all pending unregistrations to complete, + * before unregistring the loopback device and allowing the + * network namespace be freed. + * + * The netdev todo list containing all network devices + * unregistrations that happen in default_device_exit_batch + * will run in the rtnl_unlock() at the end of + * default_device_exit_batch. + */ + rtnl_lock_unregistering(net_list); list_for_each_entry(net, net_list, exit_list) { for_each_netdev_reverse(net, dev) { if (dev->rtnl_link_ops) From 9a3bab6b05383f1e4c3716b3615500c51285959e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 24 Sep 2013 06:19:57 -0700 Subject: [PATCH 205/459] net: net_secret should not depend on TCP A host might need net_secret[] and never open a single socket. Problem added in commit aebda156a570782 ("net: defer net_secret[] initialization") Based on prior patch from Hannes Frederic Sowa. Reported-by: Hannes Frederic Sowa Signed-off-by: Eric Dumazet Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- include/net/secure_seq.h | 1 - net/core/secure_seq.c | 27 ++++++++++++++++++++++++--- net/ipv4/af_inet.c | 4 +--- 3 files changed, 25 insertions(+), 7 deletions(-) diff --git a/include/net/secure_seq.h b/include/net/secure_seq.h index 6ca975bebd37..c2e542b27a5a 100644 --- a/include/net/secure_seq.h +++ b/include/net/secure_seq.h @@ -3,7 +3,6 @@ #include -extern void net_secret_init(void); extern __u32 secure_ip_id(__be32 daddr); extern __u32 secure_ipv6_id(const __be32 daddr[4]); extern u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport); diff --git a/net/core/secure_seq.c b/net/core/secure_seq.c index 6a2f13cee86a..3f1ec1586ae1 100644 --- a/net/core/secure_seq.c +++ b/net/core/secure_seq.c @@ -10,11 +10,24 @@ #include -static u32 net_secret[MD5_MESSAGE_BYTES / 4] ____cacheline_aligned; +#define NET_SECRET_SIZE (MD5_MESSAGE_BYTES / 4) -void net_secret_init(void) +static u32 net_secret[NET_SECRET_SIZE] ____cacheline_aligned; + +static void net_secret_init(void) { - get_random_bytes(net_secret, sizeof(net_secret)); + u32 tmp; + int i; + + if (likely(net_secret[0])) + return; + + for (i = NET_SECRET_SIZE; i > 0;) { + do { + get_random_bytes(&tmp, sizeof(tmp)); + } while (!tmp); + cmpxchg(&net_secret[--i], 0, tmp); + } } #ifdef CONFIG_INET @@ -42,6 +55,7 @@ __u32 secure_tcpv6_sequence_number(const __be32 *saddr, const __be32 *daddr, u32 hash[MD5_DIGEST_WORDS]; u32 i; + net_secret_init(); memcpy(hash, saddr, 16); for (i = 0; i < 4; i++) secret[i] = net_secret[i] + (__force u32)daddr[i]; @@ -63,6 +77,7 @@ u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr, u32 hash[MD5_DIGEST_WORDS]; u32 i; + net_secret_init(); memcpy(hash, saddr, 16); for (i = 0; i < 4; i++) secret[i] = net_secret[i] + (__force u32) daddr[i]; @@ -82,6 +97,7 @@ __u32 secure_ip_id(__be32 daddr) { u32 hash[MD5_DIGEST_WORDS]; + net_secret_init(); hash[0] = (__force __u32) daddr; hash[1] = net_secret[13]; hash[2] = net_secret[14]; @@ -96,6 +112,7 @@ __u32 secure_ipv6_id(const __be32 daddr[4]) { __u32 hash[4]; + net_secret_init(); memcpy(hash, daddr, 16); md5_transform(hash, net_secret); @@ -107,6 +124,7 @@ __u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr, { u32 hash[MD5_DIGEST_WORDS]; + net_secret_init(); hash[0] = (__force u32)saddr; hash[1] = (__force u32)daddr; hash[2] = ((__force u16)sport << 16) + (__force u16)dport; @@ -121,6 +139,7 @@ u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport) { u32 hash[MD5_DIGEST_WORDS]; + net_secret_init(); hash[0] = (__force u32)saddr; hash[1] = (__force u32)daddr; hash[2] = (__force u32)dport ^ net_secret[14]; @@ -140,6 +159,7 @@ u64 secure_dccp_sequence_number(__be32 saddr, __be32 daddr, u32 hash[MD5_DIGEST_WORDS]; u64 seq; + net_secret_init(); hash[0] = (__force u32)saddr; hash[1] = (__force u32)daddr; hash[2] = ((__force u16)sport << 16) + (__force u16)dport; @@ -164,6 +184,7 @@ u64 secure_dccpv6_sequence_number(__be32 *saddr, __be32 *daddr, u64 seq; u32 i; + net_secret_init(); memcpy(hash, saddr, 16); for (i = 0; i < 4; i++) secret[i] = net_secret[i] + daddr[i]; diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 7a1874b7b8fd..cfeb85cff4f0 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -263,10 +263,8 @@ void build_ehash_secret(void) get_random_bytes(&rnd, sizeof(rnd)); } while (rnd == 0); - if (cmpxchg(&inet_ehash_secret, 0, rnd) == 0) { + if (cmpxchg(&inet_ehash_secret, 0, rnd) == 0) get_random_bytes(&ipv6_hash_secret, sizeof(ipv6_hash_secret)); - net_secret_init(); - } } EXPORT_SYMBOL(build_ehash_secret); From 52b26a3e1bb3e065c32b3febdac1e1f117d88e15 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 26 Sep 2013 14:08:36 -0400 Subject: [PATCH 206/459] NFSv4.1: nfs4_fl_prepare_ds - fix bugs when the connect attempt fails - Fix an Oops when nfs4_ds_connect() returns an error. - Always check the device status after waiting for a connect to complete. Reported-by: Andy Adamson Reported-by: Jeff Layton Signed-off-by: Trond Myklebust Cc: # v3.10+ --- fs/nfs/nfs4filelayoutdev.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/fs/nfs/nfs4filelayoutdev.c b/fs/nfs/nfs4filelayoutdev.c index 95604f64cab8..cd3aef571c34 100644 --- a/fs/nfs/nfs4filelayoutdev.c +++ b/fs/nfs/nfs4filelayoutdev.c @@ -801,34 +801,34 @@ nfs4_fl_prepare_ds(struct pnfs_layout_segment *lseg, u32 ds_idx) struct nfs4_file_layout_dsaddr *dsaddr = FILELAYOUT_LSEG(lseg)->dsaddr; struct nfs4_pnfs_ds *ds = dsaddr->ds_list[ds_idx]; struct nfs4_deviceid_node *devid = FILELAYOUT_DEVID_NODE(lseg); - - if (filelayout_test_devid_unavailable(devid)) - return NULL; + struct nfs4_pnfs_ds *ret = ds; if (ds == NULL) { printk(KERN_ERR "NFS: %s: No data server for offset index %d\n", __func__, ds_idx); filelayout_mark_devid_invalid(devid); - return NULL; + goto out; } if (ds->ds_clp) - return ds; + goto out_test_devid; if (test_and_set_bit(NFS4DS_CONNECTING, &ds->ds_state) == 0) { struct nfs_server *s = NFS_SERVER(lseg->pls_layout->plh_inode); int err; err = nfs4_ds_connect(s, ds); - if (err) { + if (err) nfs4_mark_deviceid_unavailable(devid); - ds = NULL; - } nfs4_clear_ds_conn_bit(ds); } else { /* Either ds is connected, or ds is NULL */ nfs4_wait_ds_connect(ds); } - return ds; +out_test_devid: + if (filelayout_test_devid_unavailable(devid)) + ret = NULL; +out: + return ret; } module_param(dataserver_retrans, uint, 0644); From acd65e5bc1986d0089efec3fe63e52ea0c406d6d Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 26 Sep 2013 14:32:56 -0400 Subject: [PATCH 207/459] NFSv4.1: Ensure memory ordering between nfs4_ds_connect and nfs4_fl_prepare_ds We need to ensure that the initialisation of the data server nfs_client structure in nfs4_ds_connect is correctly ordered w.r.t. the read of ds->ds_clp in nfs4_fl_prepare_ds. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4filelayoutdev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nfs/nfs4filelayoutdev.c b/fs/nfs/nfs4filelayoutdev.c index cd3aef571c34..c7c295e556ed 100644 --- a/fs/nfs/nfs4filelayoutdev.c +++ b/fs/nfs/nfs4filelayoutdev.c @@ -185,6 +185,7 @@ nfs4_ds_connect(struct nfs_server *mds_srv, struct nfs4_pnfs_ds *ds) if (status) goto out_put; + smp_wmb(); ds->ds_clp = clp; dprintk("%s [new] addr: %s\n", __func__, ds->ds_remotestr); out: @@ -809,6 +810,7 @@ nfs4_fl_prepare_ds(struct pnfs_layout_segment *lseg, u32 ds_idx) filelayout_mark_devid_invalid(devid); goto out; } + smp_rmb(); if (ds->ds_clp) goto out_test_devid; From 58a8cf1212f0f3b9afb07b73647a2bca4e5a28af Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Tue, 24 Sep 2013 13:58:02 -0400 Subject: [PATCH 208/459] NFSv4.1: try SECINFO_NO_NAME flavs until one works Call nfs4_lookup_root_sec for each flavor returned by SECINFO_NO_NAME until one works. One example of a situation this fixes: - server configured for krb5 - server principal somehow gets deleted from KDC - server still thinking krb is good, sends krb5 as first entry in SECINFO_NO_NAME response - client tries krb5, but this fails without even sending an RPC because gssd's requests to the KDC can't find the server's principal Signed-off-by: Weston Andros Adamson Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 488ef9b5c51a..f5fe16bd426c 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -7578,6 +7578,8 @@ nfs41_find_root_sec(struct nfs_server *server, struct nfs_fh *fhandle, struct page *page; rpc_authflavor_t flavor; struct nfs4_secinfo_flavors *flavors; + struct nfs4_secinfo4 *secinfo; + int i; page = alloc_page(GFP_KERNEL); if (!page) { @@ -7599,9 +7601,31 @@ nfs41_find_root_sec(struct nfs_server *server, struct nfs_fh *fhandle, if (err) goto out_freepage; - flavor = nfs_find_best_sec(flavors); - if (err == 0) - err = nfs4_lookup_root_sec(server, fhandle, info, flavor); + for (i = 0; i < flavors->num_flavors; i++) { + secinfo = &flavors->flavors[i]; + + switch (secinfo->flavor) { + case RPC_AUTH_NULL: + case RPC_AUTH_UNIX: + case RPC_AUTH_GSS: + flavor = rpcauth_get_pseudoflavor(secinfo->flavor, + &secinfo->flavor_info); + break; + default: + flavor = RPC_AUTH_MAXFLAVOR; + break; + } + + if (flavor != RPC_AUTH_MAXFLAVOR) { + err = nfs4_lookup_root_sec(server, fhandle, + info, flavor); + if (!err) + break; + } + } + + if (flavor == RPC_AUTH_MAXFLAVOR) + err = -EPERM; out_freepage: put_page(page); From 367156d9a87b21b5232dd93107c5fc61b09ba2ef Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Wed, 25 Sep 2013 17:02:48 -0400 Subject: [PATCH 209/459] NFS: Give "flavor" an initial value to fix a compile warning The previous patch introduces a compile warning by not assigning an initial value to the "flavor" variable. This could only be a problem if the server returns a supported secflavor list of length zero, but it's better to fix this before it's ever hit. Signed-off-by: Anna Schumaker Acked-by: Weston Andros Adamson Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index f5fe16bd426c..d53d6785cba2 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -7576,7 +7576,7 @@ nfs41_find_root_sec(struct nfs_server *server, struct nfs_fh *fhandle, { int err; struct page *page; - rpc_authflavor_t flavor; + rpc_authflavor_t flavor = RPC_AUTH_MAXFLAVOR; struct nfs4_secinfo_flavors *flavors; struct nfs4_secinfo4 *secinfo; int i; From 15c03dd4859ab16f9212238f29dd315654aa94f6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 29 Sep 2013 15:02:38 -0700 Subject: [PATCH 210/459] Linux 3.12-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 8d0668f473ba..2ae108d4f2af 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 12 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = One Giant Leap for Frogkind # *DOCUMENTATION* From 71ac7f6255c560716c20da8ee2c964bbd96e941f Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Sun, 29 Sep 2013 08:39:21 -0700 Subject: [PATCH 211/459] apparmor: Use shash crypto API interface for profile hashes Use the shash interface, rather than the hash interface, when hashing AppArmor profiles. The shash interface does not use scatterlists and it is a better fit for what AppArmor needs. This fixes a kernel paging BUG when aa_calc_profile_hash() is passed a buffer from vmalloc(). The hash interface requires callers to handle vmalloc() buffers differently than what AppArmor was doing. Due to vmalloc() memory not being physically contiguous, each individual page behind the buffer must be assigned to a scatterlist with sg_set_page() and then the scatterlist passed to crypto_hash_update(). The shash interface does not have that limitation and allows vmalloc() and kmalloc() buffers to be handled in the same manner. BugLink: https://launchpad.net/bugs/1216294/ BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=62261 Signed-off-by: Tyler Hicks Acked-by: Seth Arnold Signed-off-by: John Johansen Signed-off-by: James Morris --- security/apparmor/crypto.c | 34 ++++++++++++++++------------------ 1 file changed, 16 insertions(+), 18 deletions(-) diff --git a/security/apparmor/crypto.c b/security/apparmor/crypto.c index d6222ba4e919..532471d0b3a0 100644 --- a/security/apparmor/crypto.c +++ b/security/apparmor/crypto.c @@ -15,14 +15,14 @@ * it should be. */ -#include +#include #include "include/apparmor.h" #include "include/crypto.h" static unsigned int apparmor_hash_size; -static struct crypto_hash *apparmor_tfm; +static struct crypto_shash *apparmor_tfm; unsigned int aa_hash_size(void) { @@ -32,35 +32,33 @@ unsigned int aa_hash_size(void) int aa_calc_profile_hash(struct aa_profile *profile, u32 version, void *start, size_t len) { - struct scatterlist sg[2]; - struct hash_desc desc = { - .tfm = apparmor_tfm, - .flags = 0 - }; + struct { + struct shash_desc shash; + char ctx[crypto_shash_descsize(apparmor_tfm)]; + } desc; int error = -ENOMEM; u32 le32_version = cpu_to_le32(version); if (!apparmor_tfm) return 0; - sg_init_table(sg, 2); - sg_set_buf(&sg[0], &le32_version, 4); - sg_set_buf(&sg[1], (u8 *) start, len); - profile->hash = kzalloc(apparmor_hash_size, GFP_KERNEL); if (!profile->hash) goto fail; - error = crypto_hash_init(&desc); + desc.shash.tfm = apparmor_tfm; + desc.shash.flags = 0; + + error = crypto_shash_init(&desc.shash); if (error) goto fail; - error = crypto_hash_update(&desc, &sg[0], 4); + error = crypto_shash_update(&desc.shash, (u8 *) &le32_version, 4); if (error) goto fail; - error = crypto_hash_update(&desc, &sg[1], len); + error = crypto_shash_update(&desc.shash, (u8 *) start, len); if (error) goto fail; - error = crypto_hash_final(&desc, profile->hash); + error = crypto_shash_final(&desc.shash, profile->hash); if (error) goto fail; @@ -75,19 +73,19 @@ fail: static int __init init_profile_hash(void) { - struct crypto_hash *tfm; + struct crypto_shash *tfm; if (!apparmor_initialized) return 0; - tfm = crypto_alloc_hash("sha1", 0, CRYPTO_ALG_ASYNC); + tfm = crypto_alloc_shash("sha1", 0, CRYPTO_ALG_ASYNC); if (IS_ERR(tfm)) { int error = PTR_ERR(tfm); AA_ERROR("failed to setup profile sha1 hashing: %d\n", error); return error; } apparmor_tfm = tfm; - apparmor_hash_size = crypto_hash_digestsize(apparmor_tfm); + apparmor_hash_size = crypto_shash_digestsize(apparmor_tfm); aa_info_message("AppArmor sha1 policy hashing enabled"); From 4cd4fc77032dca46fe7475d81461e29145db247a Mon Sep 17 00:00:00 2001 From: John Johansen Date: Sun, 29 Sep 2013 08:39:22 -0700 Subject: [PATCH 212/459] apparmor: fix suspicious RCU usage warning in policy.c/policy.h The recent 3.12 pull request for apparmor was missing a couple rcu _protected access modifiers. Resulting in the follow suspicious RCU usage [ 29.804534] [ INFO: suspicious RCU usage. ] [ 29.804539] 3.11.0+ #5 Not tainted [ 29.804541] ------------------------------- [ 29.804545] security/apparmor/include/policy.h:363 suspicious rcu_dereference_check() usage! [ 29.804548] [ 29.804548] other info that might help us debug this: [ 29.804548] [ 29.804553] [ 29.804553] rcu_scheduler_active = 1, debug_locks = 1 [ 29.804558] 2 locks held by apparmor_parser/1268: [ 29.804560] #0: (sb_writers#9){.+.+.+}, at: [] file_start_write+0x27/0x29 [ 29.804576] #1: (&ns->lock){+.+.+.}, at: [] aa_replace_profiles+0x166/0x57c [ 29.804589] [ 29.804589] stack backtrace: [ 29.804595] CPU: 0 PID: 1268 Comm: apparmor_parser Not tainted 3.11.0+ #5 [ 29.804599] Hardware name: ASUSTeK Computer Inc. UL50VT /UL50VT , BIOS 217 03/01/2010 [ 29.804602] 0000000000000000 ffff8800b95a1d90 ffffffff8144eb9b ffff8800b94db540 [ 29.804611] ffff8800b95a1dc0 ffffffff81087439 ffff880138cc3a18 ffff880138cc3a18 [ 29.804619] ffff8800b9464a90 ffff880138cc3a38 ffff8800b95a1df0 ffffffff811f5084 [ 29.804628] Call Trace: [ 29.804636] [] dump_stack+0x4e/0x82 [ 29.804642] [] lockdep_rcu_suspicious+0xfc/0x105 [ 29.804649] [] __aa_update_replacedby+0x53/0x7f [ 29.804655] [] __replace_profile+0x11f/0x1ed [ 29.804661] [] aa_replace_profiles+0x410/0x57c [ 29.804668] [] profile_replace+0x35/0x4c [ 29.804674] [] vfs_write+0xad/0x113 [ 29.804680] [] SyS_write+0x44/0x7a [ 29.804687] [] system_call_fastpath+0x16/0x1b [ 29.804691] [ 29.804694] =============================== [ 29.804697] [ INFO: suspicious RCU usage. ] [ 29.804700] 3.11.0+ #5 Not tainted [ 29.804703] ------------------------------- [ 29.804706] security/apparmor/policy.c:566 suspicious rcu_dereference_check() usage! [ 29.804709] [ 29.804709] other info that might help us debug this: [ 29.804709] [ 29.804714] [ 29.804714] rcu_scheduler_active = 1, debug_locks = 1 [ 29.804718] 2 locks held by apparmor_parser/1268: [ 29.804721] #0: (sb_writers#9){.+.+.+}, at: [] file_start_write+0x27/0x29 [ 29.804733] #1: (&ns->lock){+.+.+.}, at: [] aa_replace_profiles+0x166/0x57c [ 29.804744] [ 29.804744] stack backtrace: [ 29.804750] CPU: 0 PID: 1268 Comm: apparmor_parser Not tainted 3.11.0+ #5 [ 29.804753] Hardware name: ASUSTeK Computer Inc. UL50VT /UL50VT , BIOS 217 03/01/2010 [ 29.804756] 0000000000000000 ffff8800b95a1d80 ffffffff8144eb9b ffff8800b94db540 [ 29.804764] ffff8800b95a1db0 ffffffff81087439 ffff8800b95b02b0 0000000000000000 [ 29.804772] ffff8800b9efba08 ffff880138cc3a38 ffff8800b95a1dd0 ffffffff811f4f94 [ 29.804779] Call Trace: [ 29.804786] [] dump_stack+0x4e/0x82 [ 29.804791] [] lockdep_rcu_suspicious+0xfc/0x105 [ 29.804798] [] aa_free_replacedby_kref+0x4d/0x62 [ 29.804804] [] ? aa_put_namespace+0x17/0x17 [ 29.804810] [] kref_put+0x36/0x40 [ 29.804816] [] __replace_profile+0x13a/0x1ed [ 29.804822] [] aa_replace_profiles+0x410/0x57c [ 29.804829] [] profile_replace+0x35/0x4c [ 29.804835] [] vfs_write+0xad/0x113 [ 29.804840] [] SyS_write+0x44/0x7a [ 29.804847] [] system_call_fastpath+0x16/0x1b Reported-by: miles.lane@gmail.com CC: paulmck@linux.vnet.ibm.com Signed-off-by: John Johansen Signed-off-by: James Morris --- security/apparmor/include/policy.h | 4 +++- security/apparmor/policy.c | 3 ++- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/security/apparmor/include/policy.h b/security/apparmor/include/policy.h index f2d4b6348cbc..c28b0f20ab53 100644 --- a/security/apparmor/include/policy.h +++ b/security/apparmor/include/policy.h @@ -360,7 +360,9 @@ static inline void aa_put_replacedby(struct aa_replacedby *p) static inline void __aa_update_replacedby(struct aa_profile *orig, struct aa_profile *new) { - struct aa_profile *tmp = rcu_dereference(orig->replacedby->profile); + struct aa_profile *tmp; + tmp = rcu_dereference_protected(orig->replacedby->profile, + mutex_is_locked(&orig->ns->lock)); rcu_assign_pointer(orig->replacedby->profile, aa_get_profile(new)); orig->flags |= PFLAG_INVALID; aa_put_profile(tmp); diff --git a/security/apparmor/policy.c b/security/apparmor/policy.c index 6172509fa2b7..345bec07a27d 100644 --- a/security/apparmor/policy.c +++ b/security/apparmor/policy.c @@ -563,7 +563,8 @@ void __init aa_free_root_ns(void) static void free_replacedby(struct aa_replacedby *r) { if (r) { - aa_put_profile(rcu_dereference(r->profile)); + /* r->profile will not be updated any more as r is dead */ + aa_put_profile(rcu_dereference_protected(r->profile, true)); kzfree(r); } } From 49475555848d396a0c78fb2f8ecceb3f3f263ef1 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Wed, 18 Sep 2013 12:39:16 +0200 Subject: [PATCH 213/459] sysv: Add forgotten superblock lock init for v7 fs Superblock lock was replaced with (un)lock_super() removal, but left uninitialized for Seventh Edition UNIX filesystem in the following commit (3.7): c07cb01 sysv: drop lock/unlock super Signed-off-by: Lubomir Rintel Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/sysv/super.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/sysv/super.c b/fs/sysv/super.c index d0c6a007ce83..eda10959714f 100644 --- a/fs/sysv/super.c +++ b/fs/sysv/super.c @@ -487,6 +487,7 @@ static int v7_fill_super(struct super_block *sb, void *data, int silent) sbi->s_sb = sb; sbi->s_block_base = 0; sbi->s_type = FSTYPE_V7; + mutex_init(&sbi->s_lock); sb->s_fs_info = sbi; sb_set_blocksize(sb, 512); From 7b9a2378b480f426d2c575633fa08c20e341bb7b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 29 Sep 2013 14:59:30 -0400 Subject: [PATCH 214/459] ocfs2: needs ->d_lock to poke in ->d_parent->d_inode from ->d_revalidate() Signed-off-by: Al Viro --- fs/ocfs2/dcache.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c index ef999729e274..0d3a97d2d5f6 100644 --- a/fs/ocfs2/dcache.c +++ b/fs/ocfs2/dcache.c @@ -70,9 +70,10 @@ static int ocfs2_dentry_revalidate(struct dentry *dentry, unsigned int flags) */ if (inode == NULL) { unsigned long gen = (unsigned long) dentry->d_fsdata; - unsigned long pgen = - OCFS2_I(dentry->d_parent->d_inode)->ip_dir_lock_gen; - + unsigned long pgen; + spin_lock(&dentry->d_lock); + pgen = OCFS2_I(dentry->d_parent->d_inode)->ip_dir_lock_gen; + spin_unlock(&dentry->d_lock); trace_ocfs2_dentry_revalidate_negative(dentry->d_name.len, dentry->d_name.name, pgen, gen); From 13f3583892cb7afdb2e9eb0207dc4e03ec6f01fd Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 29 Sep 2013 16:29:04 -0400 Subject: [PATCH 215/459] afs: dget_parent() can't return a negative dentry Signed-off-by: Al Viro --- fs/afs/dir.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/afs/dir.c b/fs/afs/dir.c index 646337dc5201..529300327f45 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -600,9 +600,6 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) /* lock down the parent dentry so we can peer at it */ parent = dget_parent(dentry); - if (!parent->d_inode) - goto out_bad; - dir = AFS_FS_I(parent->d_inode); /* validate the parent directory */ From 46663d05cff3442321dc550dff6b79b885c7856f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Sun, 1 Sep 2013 22:56:21 +0200 Subject: [PATCH 216/459] avr32: use Kbuild infrastructure to handle the asm-generic headers Use kbuild to add asm-generic headers that do nothing, also remove the arch specific wrapper headers. This only affects headers that do nothing but include the generic equivalent. It does not touch any header that does a little more. Signed-off-by: Steven Rostedt Signed-off-by: Hans-Christian Egtvedt --- arch/avr32/include/asm/Kbuild | 16 +++++++++++++++- arch/avr32/include/asm/cputime.h | 6 ------ arch/avr32/include/asm/delay.h | 1 - arch/avr32/include/asm/device.h | 7 ------- arch/avr32/include/asm/div64.h | 6 ------ arch/avr32/include/asm/emergency-restart.h | 6 ------ arch/avr32/include/asm/futex.h | 6 ------ arch/avr32/include/asm/irq_regs.h | 1 - arch/avr32/include/asm/local.h | 6 ------ arch/avr32/include/asm/local64.h | 1 - arch/avr32/include/asm/percpu.h | 6 ------ arch/avr32/include/asm/scatterlist.h | 6 ------ arch/avr32/include/asm/sections.h | 6 ------ arch/avr32/include/asm/topology.h | 6 ------ arch/avr32/include/asm/xor.h | 6 ------ 15 files changed, 15 insertions(+), 71 deletions(-) delete mode 100644 arch/avr32/include/asm/cputime.h delete mode 100644 arch/avr32/include/asm/delay.h delete mode 100644 arch/avr32/include/asm/device.h delete mode 100644 arch/avr32/include/asm/div64.h delete mode 100644 arch/avr32/include/asm/emergency-restart.h delete mode 100644 arch/avr32/include/asm/futex.h delete mode 100644 arch/avr32/include/asm/irq_regs.h delete mode 100644 arch/avr32/include/asm/local.h delete mode 100644 arch/avr32/include/asm/local64.h delete mode 100644 arch/avr32/include/asm/percpu.h delete mode 100644 arch/avr32/include/asm/scatterlist.h delete mode 100644 arch/avr32/include/asm/sections.h delete mode 100644 arch/avr32/include/asm/topology.h delete mode 100644 arch/avr32/include/asm/xor.h diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild index d22af851f3f6..fd7980743890 100644 --- a/arch/avr32/include/asm/Kbuild +++ b/arch/avr32/include/asm/Kbuild @@ -1,5 +1,19 @@ generic-y += clkdev.h +generic-y += cputime.h +generic-y += delay.h +generic-y += device.h +generic-y += div64.h +generic-y += emergency-restart.h generic-y += exec.h -generic-y += trace_clock.h +generic-y += futex.h +generic-y += irq_regs.h generic-y += param.h +generic-y += local.h +generic-y += local64.h +generic-y += percpu.h +generic-y += scatterlist.h +generic-y += sections.h +generic-y += topology.h +generic-y += trace_clock.h +generic-y += xor.h diff --git a/arch/avr32/include/asm/cputime.h b/arch/avr32/include/asm/cputime.h deleted file mode 100644 index e87e0f81cbeb..000000000000 --- a/arch/avr32/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_CPUTIME_H -#define __ASM_AVR32_CPUTIME_H - -#include - -#endif /* __ASM_AVR32_CPUTIME_H */ diff --git a/arch/avr32/include/asm/delay.h b/arch/avr32/include/asm/delay.h deleted file mode 100644 index 9670e127b7b2..000000000000 --- a/arch/avr32/include/asm/delay.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/avr32/include/asm/device.h b/arch/avr32/include/asm/device.h deleted file mode 100644 index d8f9872b0e2d..000000000000 --- a/arch/avr32/include/asm/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/arch/avr32/include/asm/div64.h b/arch/avr32/include/asm/div64.h deleted file mode 100644 index d7ddd4fdeca6..000000000000 --- a/arch/avr32/include/asm/div64.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_DIV64_H -#define __ASM_AVR32_DIV64_H - -#include - -#endif /* __ASM_AVR32_DIV64_H */ diff --git a/arch/avr32/include/asm/emergency-restart.h b/arch/avr32/include/asm/emergency-restart.h deleted file mode 100644 index 3e7e014776ba..000000000000 --- a/arch/avr32/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_EMERGENCY_RESTART_H -#define __ASM_AVR32_EMERGENCY_RESTART_H - -#include - -#endif /* __ASM_AVR32_EMERGENCY_RESTART_H */ diff --git a/arch/avr32/include/asm/futex.h b/arch/avr32/include/asm/futex.h deleted file mode 100644 index 10419f14a68a..000000000000 --- a/arch/avr32/include/asm/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_FUTEX_H -#define __ASM_AVR32_FUTEX_H - -#include - -#endif /* __ASM_AVR32_FUTEX_H */ diff --git a/arch/avr32/include/asm/irq_regs.h b/arch/avr32/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b70270..000000000000 --- a/arch/avr32/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/avr32/include/asm/local.h b/arch/avr32/include/asm/local.h deleted file mode 100644 index 1c1619694da3..000000000000 --- a/arch/avr32/include/asm/local.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_LOCAL_H -#define __ASM_AVR32_LOCAL_H - -#include - -#endif /* __ASM_AVR32_LOCAL_H */ diff --git a/arch/avr32/include/asm/local64.h b/arch/avr32/include/asm/local64.h deleted file mode 100644 index 36c93b5cc239..000000000000 --- a/arch/avr32/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/avr32/include/asm/percpu.h b/arch/avr32/include/asm/percpu.h deleted file mode 100644 index 69227b4cd0d4..000000000000 --- a/arch/avr32/include/asm/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_PERCPU_H -#define __ASM_AVR32_PERCPU_H - -#include - -#endif /* __ASM_AVR32_PERCPU_H */ diff --git a/arch/avr32/include/asm/scatterlist.h b/arch/avr32/include/asm/scatterlist.h deleted file mode 100644 index a5902d9834e8..000000000000 --- a/arch/avr32/include/asm/scatterlist.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_SCATTERLIST_H -#define __ASM_AVR32_SCATTERLIST_H - -#include - -#endif /* __ASM_AVR32_SCATTERLIST_H */ diff --git a/arch/avr32/include/asm/sections.h b/arch/avr32/include/asm/sections.h deleted file mode 100644 index aa14252e4181..000000000000 --- a/arch/avr32/include/asm/sections.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_SECTIONS_H -#define __ASM_AVR32_SECTIONS_H - -#include - -#endif /* __ASM_AVR32_SECTIONS_H */ diff --git a/arch/avr32/include/asm/topology.h b/arch/avr32/include/asm/topology.h deleted file mode 100644 index 5b766cbb4806..000000000000 --- a/arch/avr32/include/asm/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_TOPOLOGY_H -#define __ASM_AVR32_TOPOLOGY_H - -#include - -#endif /* __ASM_AVR32_TOPOLOGY_H */ diff --git a/arch/avr32/include/asm/xor.h b/arch/avr32/include/asm/xor.h deleted file mode 100644 index 99c87aa0af4f..000000000000 --- a/arch/avr32/include/asm/xor.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_XOR_H -#define _ASM_XOR_H - -#include - -#endif From 1b0135b5e20c56b2edae29e92b91c0b12c983432 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 25 Sep 2013 15:32:35 +0200 Subject: [PATCH 217/459] avr32: fix clockevents kernel warning Since commit 01426478df3a8791ff5c8b6b82d409e699cfaf38 (avr32: Use generic idle loop) the kernel throws the following warning on avr32: WARNING: at 900322e4 [verbose debug info unavailable] Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0-rc2 #117 task: 901c3ecc ti: 901c0000 task.ti: 901c0000 PC is at cpu_idle_poll_ctrl+0x1c/0x38 LR is at comparator_mode+0x3e/0x40 pc : [<900322e4>] lr : [<90014882>] Not tainted sp : 901c1f74 r12: 00000000 r11: 901c74a0 r10: 901d2510 r9 : 00000001 r8 : 901db4de r7 : 901c74a0 r6 : 00000001 r5 : 00410020 r4 : 901db574 r3 : 00410024 r2 : 90206fe0 r1 : 00000000 r0 : 007f0000 Flags: qvnzc Mode bits: hjmde....G CPU Mode: Supervisor Call trace: [<90039ede>] clockevents_set_mode+0x16/0x2e [<90039f00>] clockevents_shutdown+0xa/0x1e [<9003a078>] clockevents_exchange_device+0x58/0x70 [<9003a78c>] tick_check_new_device+0x38/0x54 [<9003a1a2>] clockevents_register_device+0x32/0x90 [<900035c4>] time_init+0xa8/0x108 [<90000520>] start_kernel+0x128/0x23c When the 'avr32_comparator' clockevent device is registered, the clockevent core sets the mode of that clockevent device to CLOCK_EVT_MODE_SHUTDOWN. Due to this, the 'comparator_mode' function calls the 'cpu_idle_poll_ctrl' to disables idle poll. This results in the aforementioned warning because the polling is not enabled yet. Change the code to only disable idle poll if it is enabled by the same function to avoid the warning. Cc: stable@vger.kernel.org Signed-off-by: Gabor Juhos Acked-by: Hans-Christian Egtvedt --- arch/avr32/kernel/time.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index 869a1c6ffeee..12f828ad5058 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -98,7 +98,14 @@ static void comparator_mode(enum clock_event_mode mode, case CLOCK_EVT_MODE_SHUTDOWN: sysreg_write(COMPARE, 0); pr_debug("%s: stop\n", evdev->name); - cpu_idle_poll_ctrl(false); + if (evdev->mode == CLOCK_EVT_MODE_ONESHOT || + evdev->mode == CLOCK_EVT_MODE_RESUME) { + /* + * Only disable idle poll if we have forced that + * in a previous call. + */ + cpu_idle_poll_ctrl(false); + } break; default: BUG(); From 395e73a278cfa3b1560b414ab93674711574ddc6 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 25 Sep 2013 21:50:01 +0200 Subject: [PATCH 218/459] avr32: cast syscall_return to silence compiler warning The patch fixes the following compiler warning: CC arch/avr32/kernel/process.o arch/avr32/kernel/process.c: In function 'copy_thread': arch/avr32/kernel/process.c:292: warning: assignment makes integer \ from pointer without a cast Signed-off-by: Gabor Juhos Acked-by: Hans-Christian Egtvedt --- arch/avr32/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c index c2731003edef..42a53e740a7e 100644 --- a/arch/avr32/kernel/process.c +++ b/arch/avr32/kernel/process.c @@ -289,7 +289,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, memset(childregs, 0, sizeof(struct pt_regs)); p->thread.cpu_context.r0 = arg; p->thread.cpu_context.r1 = usp; /* fn */ - p->thread.cpu_context.r2 = syscall_return; + p->thread.cpu_context.r2 = (unsigned long)syscall_return; p->thread.cpu_context.pc = (unsigned long)ret_from_kernel_thread; childregs->sr = MODE_SUPERVISOR; } else { From 550dbf47819239c7ceb27bbd9879e2feb0633aab Mon Sep 17 00:00:00 2001 From: Stefan Achatz Date: Sat, 28 Sep 2013 05:57:46 +0200 Subject: [PATCH 219/459] HID: roccat: Fix "cannot create duplicate filename" problems Fixing some wrong macro stringification/concatenation. Acked-by: Greg Kroah-Hartman Signed-off-by: Stefan Achatz Signed-off-by: Jiri Kosina --- drivers/hid/hid-roccat-kone.c | 2 +- drivers/hid/hid-roccat-koneplus.c | 4 ++-- drivers/hid/hid-roccat-kovaplus.c | 4 ++-- drivers/hid/hid-roccat-pyra.c | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c index 602c188e9d86..6101816a7ddd 100644 --- a/drivers/hid/hid-roccat-kone.c +++ b/drivers/hid/hid-roccat-kone.c @@ -382,7 +382,7 @@ static ssize_t kone_sysfs_write_profilex(struct file *fp, } #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number = { \ - .attr = { .name = "profile##number", .mode = 0660 }, \ + .attr = { .name = "profile" #number, .mode = 0660 }, \ .size = sizeof(struct kone_profile), \ .read = kone_sysfs_read_profilex, \ .write = kone_sysfs_write_profilex, \ diff --git a/drivers/hid/hid-roccat-koneplus.c b/drivers/hid/hid-roccat-koneplus.c index 5ddf605b6b89..5e99fcdc71b9 100644 --- a/drivers/hid/hid-roccat-koneplus.c +++ b/drivers/hid/hid-roccat-koneplus.c @@ -229,13 +229,13 @@ static ssize_t koneplus_sysfs_read_profilex_buttons(struct file *fp, #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number##_settings = { \ - .attr = { .name = "profile##number##_settings", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_settings", .mode = 0440 }, \ .size = KONEPLUS_SIZE_PROFILE_SETTINGS, \ .read = koneplus_sysfs_read_profilex_settings, \ .private = &profile_numbers[number-1], \ }; \ static struct bin_attribute bin_attr_profile##number##_buttons = { \ - .attr = { .name = "profile##number##_buttons", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_buttons", .mode = 0440 }, \ .size = KONEPLUS_SIZE_PROFILE_BUTTONS, \ .read = koneplus_sysfs_read_profilex_buttons, \ .private = &profile_numbers[number-1], \ diff --git a/drivers/hid/hid-roccat-kovaplus.c b/drivers/hid/hid-roccat-kovaplus.c index 515bc03136c0..0c8e1ef0b67d 100644 --- a/drivers/hid/hid-roccat-kovaplus.c +++ b/drivers/hid/hid-roccat-kovaplus.c @@ -257,13 +257,13 @@ static ssize_t kovaplus_sysfs_read_profilex_buttons(struct file *fp, #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number##_settings = { \ - .attr = { .name = "profile##number##_settings", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_settings", .mode = 0440 }, \ .size = KOVAPLUS_SIZE_PROFILE_SETTINGS, \ .read = kovaplus_sysfs_read_profilex_settings, \ .private = &profile_numbers[number-1], \ }; \ static struct bin_attribute bin_attr_profile##number##_buttons = { \ - .attr = { .name = "profile##number##_buttons", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_buttons", .mode = 0440 }, \ .size = KOVAPLUS_SIZE_PROFILE_BUTTONS, \ .read = kovaplus_sysfs_read_profilex_buttons, \ .private = &profile_numbers[number-1], \ diff --git a/drivers/hid/hid-roccat-pyra.c b/drivers/hid/hid-roccat-pyra.c index 5a6dbbeee790..1a07e07d99a0 100644 --- a/drivers/hid/hid-roccat-pyra.c +++ b/drivers/hid/hid-roccat-pyra.c @@ -225,13 +225,13 @@ static ssize_t pyra_sysfs_read_profilex_buttons(struct file *fp, #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number##_settings = { \ - .attr = { .name = "profile##number##_settings", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_settings", .mode = 0440 }, \ .size = PYRA_SIZE_PROFILE_SETTINGS, \ .read = pyra_sysfs_read_profilex_settings, \ .private = &profile_numbers[number-1], \ }; \ static struct bin_attribute bin_attr_profile##number##_buttons = { \ - .attr = { .name = "profile##number##_buttons", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_buttons", .mode = 0440 }, \ .size = PYRA_SIZE_PROFILE_BUTTONS, \ .read = pyra_sysfs_read_profilex_buttons, \ .private = &profile_numbers[number-1], \ From dfc2cd7c284aa2dc88b5edbdd08645517a747d37 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Fri, 27 Sep 2013 20:27:58 +0200 Subject: [PATCH 220/459] ALSA: ac97: Add ID for TI TLV320AIC27 codec Add 0x54584e03 ID for TI TLV320AIC27 AC'97 codec according to datasheet: http://www.ti.com/lit/ds/slas253a/slas253a.pdf The weird thing is that the chip is physically marked 320AD91. Signed-off-by: Ondrej Zary Signed-off-by: Takashi Iwai --- sound/pci/ac97/ac97_codec.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index 445ca481d8d3..bf578ba2677e 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -175,6 +175,7 @@ static const struct ac97_codec_id snd_ac97_codec_ids[] = { { 0x54524106, 0xffffffff, "TR28026", NULL, NULL }, { 0x54524108, 0xffffffff, "TR28028", patch_tritech_tr28028, NULL }, // added by xin jin [07/09/99] { 0x54524123, 0xffffffff, "TR28602", NULL, NULL }, // only guess --jk [TR28023 = eMicro EM28023 (new CT1297)] +{ 0x54584e03, 0xffffffff, "TLV320AIC27", NULL, NULL }, { 0x54584e20, 0xffffffff, "TLC320AD9xC", NULL, NULL }, { 0x56494161, 0xffffffff, "VIA1612A", NULL, NULL }, // modified ICE1232 with S/PDIF { 0x56494170, 0xffffffff, "VIA1617A", patch_vt1617a, NULL }, // modified VT1616 with S/PDIF From 4a4370442c996be0fd08234a167c8a127c2488bb Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 30 Sep 2013 12:13:44 +0200 Subject: [PATCH 221/459] ALSA: hda - Fix GPIO for Acer Aspire 3830TG Acer Aspire 3830TG seems requiring GPIO bit 0 as the primary mute control. When a machine is booted after Windows 8, the GPIO pin is turned off and it results in the silent output. This patch adds the manual fixup of GPIO bit 0 for this model. Reported-by: Christopher Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 4edd2d0f9a3c..ec68eaea0336 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3231,6 +3231,7 @@ enum { CXT_FIXUP_INC_MIC_BOOST, CXT_FIXUP_HEADPHONE_MIC_PIN, CXT_FIXUP_HEADPHONE_MIC, + CXT_FIXUP_GPIO1, }; static void cxt_fixup_stereo_dmic(struct hda_codec *codec, @@ -3375,6 +3376,15 @@ static const struct hda_fixup cxt_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = cxt_fixup_headphone_mic, }, + [CXT_FIXUP_GPIO1] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + { 0x01, AC_VERB_SET_GPIO_MASK, 0x01 }, + { 0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01 }, + { 0x01, AC_VERB_SET_GPIO_DATA, 0x01 }, + { } + }, + }, }; static const struct snd_pci_quirk cxt5051_fixups[] = { @@ -3384,6 +3394,7 @@ static const struct snd_pci_quirk cxt5051_fixups[] = { static const struct snd_pci_quirk cxt5066_fixups[] = { SND_PCI_QUIRK(0x1025, 0x0543, "Acer Aspire One 522", CXT_FIXUP_STEREO_DMIC), + SND_PCI_QUIRK(0x1025, 0x054c, "Acer Aspire 3830TG", CXT_FIXUP_GPIO1), SND_PCI_QUIRK(0x1043, 0x138d, "Asus", CXT_FIXUP_HEADPHONE_MIC_PIN), SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400", CXT_PINCFG_LENOVO_TP410), SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo T410", CXT_PINCFG_LENOVO_TP410), From f4a87e7bd2eaef26a3ca25437ce8b807de2966ad Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 30 Sep 2013 08:51:46 +0100 Subject: [PATCH 222/459] netfilter: synproxy: fix BUG_ON triggered by corrupt TCP packets TCP packets hitting the SYN proxy through the SYNPROXY target are not validated by TCP conntrack. When th->doff is below 5, an underflow happens when calculating the options length, causing skb_header_pointer() to return NULL and triggering the BUG_ON(). Handle this case gracefully by checking for NULL instead of using BUG_ON(). Reported-by: Martin Topholm Tested-by: Martin Topholm Signed-off-by: Patrick McHardy Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_conntrack_synproxy.h | 2 +- net/ipv4/netfilter/ipt_SYNPROXY.c | 10 +++++++--- net/ipv6/netfilter/ip6t_SYNPROXY.c | 10 +++++++--- net/netfilter/nf_synproxy_core.c | 12 +++++++----- 4 files changed, 22 insertions(+), 12 deletions(-) diff --git a/include/net/netfilter/nf_conntrack_synproxy.h b/include/net/netfilter/nf_conntrack_synproxy.h index 806f54a290d6..f572f313d6f1 100644 --- a/include/net/netfilter/nf_conntrack_synproxy.h +++ b/include/net/netfilter/nf_conntrack_synproxy.h @@ -56,7 +56,7 @@ struct synproxy_options { struct tcphdr; struct xt_synproxy_info; -extern void synproxy_parse_options(const struct sk_buff *skb, unsigned int doff, +extern bool synproxy_parse_options(const struct sk_buff *skb, unsigned int doff, const struct tcphdr *th, struct synproxy_options *opts); extern unsigned int synproxy_options_size(const struct synproxy_options *opts); diff --git a/net/ipv4/netfilter/ipt_SYNPROXY.c b/net/ipv4/netfilter/ipt_SYNPROXY.c index 67e17dcda65e..b6346bf2fde3 100644 --- a/net/ipv4/netfilter/ipt_SYNPROXY.c +++ b/net/ipv4/netfilter/ipt_SYNPROXY.c @@ -267,7 +267,8 @@ synproxy_tg4(struct sk_buff *skb, const struct xt_action_param *par) if (th == NULL) return NF_DROP; - synproxy_parse_options(skb, par->thoff, th, &opts); + if (!synproxy_parse_options(skb, par->thoff, th, &opts)) + return NF_DROP; if (th->syn && !(th->ack || th->fin || th->rst)) { /* Initial SYN from client */ @@ -350,7 +351,8 @@ static unsigned int ipv4_synproxy_hook(unsigned int hooknum, /* fall through */ case TCP_CONNTRACK_SYN_SENT: - synproxy_parse_options(skb, thoff, th, &opts); + if (!synproxy_parse_options(skb, thoff, th, &opts)) + return NF_DROP; if (!th->syn && th->ack && CTINFO2DIR(ctinfo) == IP_CT_DIR_ORIGINAL) { @@ -373,7 +375,9 @@ static unsigned int ipv4_synproxy_hook(unsigned int hooknum, if (!th->syn || !th->ack) break; - synproxy_parse_options(skb, thoff, th, &opts); + if (!synproxy_parse_options(skb, thoff, th, &opts)) + return NF_DROP; + if (opts.options & XT_SYNPROXY_OPT_TIMESTAMP) synproxy->tsoff = opts.tsval - synproxy->its; diff --git a/net/ipv6/netfilter/ip6t_SYNPROXY.c b/net/ipv6/netfilter/ip6t_SYNPROXY.c index 19cfea8dbcaa..2748b042da72 100644 --- a/net/ipv6/netfilter/ip6t_SYNPROXY.c +++ b/net/ipv6/netfilter/ip6t_SYNPROXY.c @@ -282,7 +282,8 @@ synproxy_tg6(struct sk_buff *skb, const struct xt_action_param *par) if (th == NULL) return NF_DROP; - synproxy_parse_options(skb, par->thoff, th, &opts); + if (!synproxy_parse_options(skb, par->thoff, th, &opts)) + return NF_DROP; if (th->syn && !(th->ack || th->fin || th->rst)) { /* Initial SYN from client */ @@ -372,7 +373,8 @@ static unsigned int ipv6_synproxy_hook(unsigned int hooknum, /* fall through */ case TCP_CONNTRACK_SYN_SENT: - synproxy_parse_options(skb, thoff, th, &opts); + if (!synproxy_parse_options(skb, thoff, th, &opts)) + return NF_DROP; if (!th->syn && th->ack && CTINFO2DIR(ctinfo) == IP_CT_DIR_ORIGINAL) { @@ -395,7 +397,9 @@ static unsigned int ipv6_synproxy_hook(unsigned int hooknum, if (!th->syn || !th->ack) break; - synproxy_parse_options(skb, thoff, th, &opts); + if (!synproxy_parse_options(skb, thoff, th, &opts)) + return NF_DROP; + if (opts.options & XT_SYNPROXY_OPT_TIMESTAMP) synproxy->tsoff = opts.tsval - synproxy->its; diff --git a/net/netfilter/nf_synproxy_core.c b/net/netfilter/nf_synproxy_core.c index 6fd967c6278c..cdf4567ba9b3 100644 --- a/net/netfilter/nf_synproxy_core.c +++ b/net/netfilter/nf_synproxy_core.c @@ -24,7 +24,7 @@ int synproxy_net_id; EXPORT_SYMBOL_GPL(synproxy_net_id); -void +bool synproxy_parse_options(const struct sk_buff *skb, unsigned int doff, const struct tcphdr *th, struct synproxy_options *opts) { @@ -32,7 +32,8 @@ synproxy_parse_options(const struct sk_buff *skb, unsigned int doff, u8 buf[40], *ptr; ptr = skb_header_pointer(skb, doff + sizeof(*th), length, buf); - BUG_ON(ptr == NULL); + if (ptr == NULL) + return false; opts->options = 0; while (length > 0) { @@ -41,16 +42,16 @@ synproxy_parse_options(const struct sk_buff *skb, unsigned int doff, switch (opcode) { case TCPOPT_EOL: - return; + return true; case TCPOPT_NOP: length--; continue; default: opsize = *ptr++; if (opsize < 2) - return; + return true; if (opsize > length) - return; + return true; switch (opcode) { case TCPOPT_MSS: @@ -84,6 +85,7 @@ synproxy_parse_options(const struct sk_buff *skb, unsigned int doff, length -= opsize; } } + return true; } EXPORT_SYMBOL_GPL(synproxy_parse_options); From 8f0ba630af45235a6866054704531d49e524e49a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Sep 2013 06:49:20 +0800 Subject: [PATCH 223/459] s390/3270: fix return value check in tty3270_resize_work() In case of error, the function tty3270_alloc_screen() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/tty3270.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c index a0f47c83fd62..3f4ca4e09a4c 100644 --- a/drivers/s390/char/tty3270.c +++ b/drivers/s390/char/tty3270.c @@ -810,7 +810,7 @@ static void tty3270_resize_work(struct work_struct *work) struct winsize ws; screen = tty3270_alloc_screen(tp->n_rows, tp->n_cols); - if (!screen) + if (IS_ERR(screen)) return; /* Switch to new output size */ spin_lock_bh(&tp->view.lock); From 742343551165f314c740a41b070d0fc7fbe202f7 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 2 Sep 2013 10:22:21 +0200 Subject: [PATCH 224/459] s390/kprobes: add exrl to list of prohibited opcodes "execute relative long" may have all sorts of side effects dependend on the instructions it executes. Therefore prohibit setting a kprobe on exrl just like we do for the regular execute instruction. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/kprobes.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index 0ce9fb245034..d86e64eddb42 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -67,6 +67,11 @@ static int __kprobes is_prohibited_opcode(kprobe_opcode_t *insn) case 0xac: /* stnsm */ case 0xad: /* stosm */ return -EINVAL; + case 0xc6: + switch (insn[0] & 0x0f) { + case 0x00: /* exrl */ + return -EINVAL; + } } switch (insn[0]) { case 0x0101: /* pr */ @@ -180,7 +185,6 @@ static int __kprobes is_insn_relative_long(kprobe_opcode_t *insn) break; case 0xc6: switch (insn[0] & 0x0f) { - case 0x00: /* exrl */ case 0x02: /* pfdrl */ case 0x04: /* cghrl */ case 0x05: /* chrl */ From 22bfda6688c9b91393a07887182ec35acc9d06bb Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Tue, 17 Sep 2013 13:28:50 +0200 Subject: [PATCH 225/459] s390/sclp: properly detect line mode console To detect a line mode console we need a message event type for the receive mask and a command event type for the send mask. Checking for a MSG event in the sclp send mask was wrong and might result in line mode consoles not being detected. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_cmd.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index 8cd34bf644b3..77df9cb00688 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -145,9 +145,11 @@ bool __init sclp_has_linemode(void) if (sccb->header.response_code != 0x20) return 0; - if (sccb->sclp_send_mask & (EVTYP_MSG_MASK | EVTYP_PMSGCMD_MASK)) - return 1; - return 0; + if (!(sccb->sclp_send_mask & (EVTYP_OPCMD_MASK | EVTYP_PMSGCMD_MASK))) + return 0; + if (!(sccb->sclp_receive_mask & (EVTYP_MSG_MASK | EVTYP_PMSGCMD_MASK))) + return 0; + return 1; } bool __init sclp_has_vt220(void) From 4d3b0664a0d0c0dc7501cfbd067f74226aeca510 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Fri, 27 Sep 2013 15:41:43 +0200 Subject: [PATCH 226/459] s390: Allow vmalloc target buffers for copy_from_oldmem() Currently copy_from_oldmem() is not able to copy to virtual memory. When using kexec pre-allocated ELF header, copy_from_oldmem() is used to copy the ELF notes information to vmalloc buffers. So fix this and use the new function copy_from_realmem() that allows copying also to vmalloc memory. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/crash_dump.c | 42 +++++++++++++++++------------------ 1 file changed, 20 insertions(+), 22 deletions(-) diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c index c84f33d51f7b..7dd21720e5b0 100644 --- a/arch/s390/kernel/crash_dump.c +++ b/arch/s390/kernel/crash_dump.c @@ -40,28 +40,26 @@ static inline void *load_real_addr(void *addr) } /* - * Copy up to one page to vmalloc or real memory + * Copy real to virtual or real memory */ -static ssize_t copy_page_real(void *buf, void *src, size_t csize) +static int copy_from_realmem(void *dest, void *src, size_t count) { - size_t size; + unsigned long size; + int rc; - if (is_vmalloc_addr(buf)) { - BUG_ON(csize >= PAGE_SIZE); - /* If buf is not page aligned, copy first part */ - size = min(roundup(__pa(buf), PAGE_SIZE) - __pa(buf), csize); - if (size) { - if (memcpy_real(load_real_addr(buf), src, size)) - return -EFAULT; - buf += size; - src += size; - } - /* Copy second part */ - size = csize - size; - return (size) ? memcpy_real(load_real_addr(buf), src, size) : 0; - } else { - return memcpy_real(buf, src, csize); - } + if (!count) + return 0; + if (!is_vmalloc_or_module_addr(dest)) + return memcpy_real(dest, src, count); + do { + size = min(count, PAGE_SIZE - (__pa(dest) & ~PAGE_MASK)); + if (memcpy_real(load_real_addr(dest), src, size)) + return -EFAULT; + count -= size; + dest += size; + src += size; + } while (count); + return 0; } /* @@ -114,7 +112,7 @@ static ssize_t copy_oldmem_page_kdump(char *buf, size_t csize, rc = copy_to_user_real((void __force __user *) buf, (void *) src, csize); else - rc = copy_page_real(buf, (void *) src, csize); + rc = copy_from_realmem(buf, (void *) src, csize); return (rc == 0) ? rc : csize; } @@ -210,7 +208,7 @@ int copy_from_oldmem(void *dest, void *src, size_t count) if (OLDMEM_BASE) { if ((unsigned long) src < OLDMEM_SIZE) { copied = min(count, OLDMEM_SIZE - (unsigned long) src); - rc = memcpy_real(dest, src + OLDMEM_BASE, copied); + rc = copy_from_realmem(dest, src + OLDMEM_BASE, copied); if (rc) return rc; } @@ -223,7 +221,7 @@ int copy_from_oldmem(void *dest, void *src, size_t count) return rc; } } - return memcpy_real(dest + copied, src + copied, count - copied); + return copy_from_realmem(dest + copied, src + copied, count - copied); } /* From dbbfe487e5f3fc00c9fe5207d63309859704d12f Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 27 Sep 2013 15:24:38 +0200 Subject: [PATCH 227/459] s390: fix system call restart after inferior call Git commit 616498813b11ffef "s390: system call path micro optimization" introduced a regression in regard to system call restarting and inferior function calls via the ptrace interface. The pointer to the system call table needs to be loaded in sysc_sigpending if do_signal returns with TIF_SYSCALl set after it restored a system call context. Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/entry.S | 1 + arch/s390/kernel/entry64.S | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index cc30d1fb000c..0dc2b6d0a1ec 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -266,6 +266,7 @@ sysc_sigpending: tm __TI_flags+3(%r12),_TIF_SYSCALL jno sysc_return lm %r2,%r7,__PT_R2(%r11) # load svc arguments + l %r10,__TI_sysc_table(%r12) # 31 bit system call table xr %r8,%r8 # svc 0 returns -ENOSYS clc __PT_INT_CODE+2(2,%r11),BASED(.Lnr_syscalls+2) jnl sysc_nr_ok # invalid svc number -> do svc 0 diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 2b2188b97c6a..e5b43c97a834 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -297,6 +297,7 @@ sysc_sigpending: tm __TI_flags+7(%r12),_TIF_SYSCALL jno sysc_return lmg %r2,%r7,__PT_R2(%r11) # load svc arguments + lg %r10,__TI_sysc_table(%r12) # address of system call table lghi %r8,0 # svc 0 returns -ENOSYS llgh %r1,__PT_INT_CODE+2(%r11) # load new svc number cghi %r1,NR_syscalls From 0d1862ea1a5bb876cf05555a7307080cb75bf379 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 27 Sep 2013 12:15:05 +0200 Subject: [PATCH 228/459] can: flexcan: fix flexcan_chip_start() on imx6 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In the flexcan_chip_start() function first the flexcan core is going through the soft reset sequence, then the RX FIFO is enabled. With the hardware is put into FIFO mode, message buffers 1...7 are reserved by the FIFO engine. The remaining message buffers are in reset default values. This patch removes the bogus initialization of the message buffers, as it causes an imprecise external abort on imx6. Cc: linux-stable Reported-by: Lothar Waßmann Tested-by: Lothar Waßmann Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 71c677e651d7..3f21142138b7 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -702,7 +702,6 @@ static int flexcan_chip_start(struct net_device *dev) { struct flexcan_priv *priv = netdev_priv(dev); struct flexcan_regs __iomem *regs = priv->base; - unsigned int i; int err; u32 reg_mcr, reg_ctrl; @@ -772,17 +771,6 @@ static int flexcan_chip_start(struct net_device *dev) netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl); flexcan_write(reg_ctrl, ®s->ctrl); - for (i = 0; i < ARRAY_SIZE(regs->cantxfg); i++) { - flexcan_write(0, ®s->cantxfg[i].can_ctrl); - flexcan_write(0, ®s->cantxfg[i].can_id); - flexcan_write(0, ®s->cantxfg[i].data[0]); - flexcan_write(0, ®s->cantxfg[i].data[1]); - - /* put MB into rx queue */ - flexcan_write(FLEXCAN_MB_CNT_CODE(0x4), - ®s->cantxfg[i].can_ctrl); - } - /* acceptance mask/acceptance code (accept everything) */ flexcan_write(0x0, ®s->rxgmask); flexcan_write(0x0, ®s->rx14mask); From 08ebb250ef9473112273f780a777b4624a38856f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 30 Sep 2013 15:09:20 +0200 Subject: [PATCH 229/459] MIPS: Alchemy: MTX-1: fix incorrect placement of __initdata tag __initdata tag should be placed between the variable name and equal sign for the variable to be placed in the intended .init.data section. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Kyungmin Park Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5934/ Signed-off-by: Ralf Baechle --- arch/mips/alchemy/board-mtx1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c index 4a9baa9f6330..9969dbab19e3 100644 --- a/arch/mips/alchemy/board-mtx1.c +++ b/arch/mips/alchemy/board-mtx1.c @@ -276,7 +276,7 @@ static struct platform_device mtx1_pci_host = { .resource = alchemy_pci_host_res, }; -static struct __initdata platform_device * mtx1_devs[] = { +static struct platform_device *mtx1_devs[] __initdata = { &mtx1_pci_host, &mtx1_gpio_leds, &mtx1_wdt, From aa06a5adb9bbebd0d694008b74233d8db4ebfa21 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sun, 29 Sep 2013 20:36:41 +0200 Subject: [PATCH 230/459] ARM: mvebu: fix ReadyNAS 102 Power button GPIO to make it active high NETGEAR ReadyNAS 102 Power button definition in .dts file flags associated GPIO active low instead of active high. This results in reversed events reported by input subsystem (0 returned when the button is pressed, 1 when released). This patch makes associated GPIO active high to recover correct behaviour. Signed-off-by: Arnaud Ebalard Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-netgear-rn102.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 05e4485a8225..396949d809ac 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -160,7 +160,7 @@ button@1 { label = "Power Button"; linux,code = <116>; /* KEY_POWER */ - gpios = <&gpio1 30 1>; + gpios = <&gpio1 30 0>; }; button@2 { From 2832cf2558095854bcefe5a4e3690f4921f9f3a6 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sun, 29 Sep 2013 23:41:43 +0200 Subject: [PATCH 231/459] ARM: mvebu: Add DT entry for ReadyNAS 102 to use gpio-poweroff driver Without that fix, at the end of the shutdown process, the board is still powered (led glowing, fan running, ...). Signed-off-by: Arnaud Ebalard Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-netgear-rn102.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 396949d809ac..40e73be31720 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -57,6 +57,11 @@ marvell,pins = "mpp56"; marvell,function = "gpio"; }; + + poweroff: poweroff { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; }; mdio { @@ -176,4 +181,11 @@ }; }; + gpio_poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&poweroff>; + pinctrl-names = "default"; + gpios = <&gpio0 8 1>; + }; + }; From f862eefec0b68e099a9fa58d3761ffb10bad97e1 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 26 Sep 2013 13:24:53 -0400 Subject: [PATCH 232/459] tile: use a more conservative __my_cpu_offset in CONFIG_PREEMPT It turns out the kernel relies on barrier() to force a reload of the percpu offset value. Since we can't easily modify the definition of barrier() to include "tp" as an output register, we instead provide a definition of __my_cpu_offset as extended assembly that includes a fake stack read to hazard against barrier(), forcing gcc to know that it must reread "tp" and recompute anything based on "tp" after a barrier. This fixes observed hangs in the slub allocator when we are looping on a percpu cmpxchg_double. A similar fix for ARMv7 was made in June in change 509eb76ebf97. Cc: stable@vger.kernel.org Signed-off-by: Chris Metcalf --- arch/tile/include/asm/percpu.h | 34 +++++++++++++++++++++++++++++++--- 1 file changed, 31 insertions(+), 3 deletions(-) diff --git a/arch/tile/include/asm/percpu.h b/arch/tile/include/asm/percpu.h index 63294f5a8efb..4f7ae39fa202 100644 --- a/arch/tile/include/asm/percpu.h +++ b/arch/tile/include/asm/percpu.h @@ -15,9 +15,37 @@ #ifndef _ASM_TILE_PERCPU_H #define _ASM_TILE_PERCPU_H -register unsigned long __my_cpu_offset __asm__("tp"); -#define __my_cpu_offset __my_cpu_offset -#define set_my_cpu_offset(tp) (__my_cpu_offset = (tp)) +register unsigned long my_cpu_offset_reg asm("tp"); + +#ifdef CONFIG_PREEMPT +/* + * For full preemption, we can't just use the register variable + * directly, since we need barrier() to hazard against it, causing the + * compiler to reload anything computed from a previous "tp" value. + * But we also don't want to use volatile asm, since we'd like the + * compiler to be able to cache the value across multiple percpu reads. + * So we use a fake stack read as a hazard against barrier(). + * The 'U' constraint is like 'm' but disallows postincrement. + */ +static inline unsigned long __my_cpu_offset(void) +{ + unsigned long tp; + register unsigned long *sp asm("sp"); + asm("move %0, tp" : "=r" (tp) : "U" (*sp)); + return tp; +} +#define __my_cpu_offset __my_cpu_offset() +#else +/* + * We don't need to hazard against barrier() since "tp" doesn't ever + * change with PREEMPT_NONE, and with PREEMPT_VOLUNTARY it only + * changes at function call points, at which we are already re-reading + * the value of "tp" due to "my_cpu_offset_reg" being a global variable. + */ +#define __my_cpu_offset my_cpu_offset_reg +#endif + +#define set_my_cpu_offset(tp) (my_cpu_offset_reg = (tp)) #include From 0cc96a745059e8daf1d7d6a26672f0ad9056e989 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 27 Sep 2013 11:26:30 +0300 Subject: [PATCH 233/459] arch: tile: re-use kbasename() helper kbasename() returns the filename part of a pathname. Signed-off-by: Andy Shevchenko --- arch/tile/kernel/stack.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/arch/tile/kernel/stack.c b/arch/tile/kernel/stack.c index 362284af3afd..c93977a62116 100644 --- a/arch/tile/kernel/stack.c +++ b/arch/tile/kernel/stack.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -332,21 +333,18 @@ static void describe_addr(struct KBacktraceIterator *kbt, } if (vma->vm_file) { - char *s; p = d_path(&vma->vm_file->f_path, buf, bufsize); if (IS_ERR(p)) p = "?"; - s = strrchr(p, '/'); - if (s) - p = s+1; + name = kbasename(p); } else { - p = "anon"; + name = "anon"; } /* Generate a string description of the vma info. */ - namelen = strlen(p); + namelen = strlen(name); remaining = (bufsize - 1) - namelen; - memmove(buf, p, namelen); + memmove(buf, name, namelen); snprintf(buf + namelen, remaining, "[%lx+%lx] ", vma->vm_start, vma->vm_end - vma->vm_start); } From ade37198937a52bc3f59c40ffb14cb6688b273b7 Mon Sep 17 00:00:00 2001 From: Ramkumar Ramachandra Date: Sat, 28 Sep 2013 12:19:55 +0100 Subject: [PATCH 234/459] arm64: include EXT4 in defconfig Most readily available root filesystems are formatted as EXT4 these days. For example, see the raring rootfs that the Debian folk is preparing [1]. [1]: http://people.debian.org/~wookey/bootstrap/rootfs/ Cc: Will Deacon Cc: Andreas Schwab Signed-off-by: Ramkumar Ramachandra Signed-off-by: Catalin Marinas --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 5b3e83217b03..798bcbb31fa7 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -72,6 +72,7 @@ CONFIG_LOGO=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set CONFIG_FUSE_FS=y From 4eb507b874035873dafdb381e61935fed7a8ad85 Mon Sep 17 00:00:00 2001 From: Ramkumar Ramachandra Date: Sat, 28 Sep 2013 12:19:56 +0100 Subject: [PATCH 235/459] arm64: include VIRTIO_{MMIO,BLK} in defconfig Currently, development on arm64 is aided by a Foundation_v8 emulator distributed by ARM [1]. To run their kernels, users will execute: $ ./Foundation_v8 --image linux-system.axf --block-device raring-rootfs To mount the raring-rootfs filesystem, the kernel parameter should typically include: root=/dev/vda For this device to be present, the kernel must be compiled with VIRTIO_{MMIO,BLK}. To make this work out-of-the-box, make it part of the default configuration. [1]: https://silver.arm.com/browse/FM00A Cc: Will Deacon Cc: Andreas Schwab Signed-off-by: Ramkumar Ramachandra Signed-off-by: Catalin Marinas --- arch/arm64/configs/defconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 798bcbb31fa7..31c81e9b792e 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -42,7 +42,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y -# CONFIG_BLK_DEV is not set +CONFIG_BLK_DEV=y CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y @@ -91,3 +91,5 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set CONFIG_ATOMIC64_SELFTEST=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_BLK=y From a13699784157624244246996771400ebef91dc4a Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 23 Sep 2013 23:15:08 +0800 Subject: [PATCH 236/459] ARM: dts: sirf: fix fifosize, clks, dma channels for UART sirf uart and usp-based uart driver with full dma support has hit 3.12, here we fix the fifosize, dma channels for some HW prop. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Olof Johansson --- arch/arm/boot/dts/atlas6.dtsi | 10 ++++++++++ arch/arm/boot/dts/prima2.dtsi | 22 +++++++++++++++++++--- 2 files changed, 29 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 8678e0c11119..3dccc3ab33a3 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -181,6 +181,8 @@ interrupts = <17>; fifosize = <128>; clocks = <&clks 13>; + sirf,uart-dma-rx-channel = <21>; + sirf,uart-dma-tx-channel = <2>; }; uart1: uart@b0060000 { @@ -199,6 +201,8 @@ interrupts = <19>; fifosize = <128>; clocks = <&clks 15>; + sirf,uart-dma-rx-channel = <6>; + sirf,uart-dma-tx-channel = <7>; }; usp0: usp@b0080000 { @@ -206,7 +210,10 @@ compatible = "sirf,prima2-usp"; reg = <0xb0080000 0x10000>; interrupts = <20>; + fifosize = <128>; clocks = <&clks 28>; + sirf,usp-dma-rx-channel = <17>; + sirf,usp-dma-tx-channel = <18>; }; usp1: usp@b0090000 { @@ -214,7 +221,10 @@ compatible = "sirf,prima2-usp"; reg = <0xb0090000 0x10000>; interrupts = <21>; + fifosize = <128>; clocks = <&clks 29>; + sirf,usp-dma-rx-channel = <14>; + sirf,usp-dma-tx-channel = <15>; }; dmac0: dma-controller@b00b0000 { diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index bbeb623fc2c6..c52faea063a2 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -196,25 +196,32 @@ uart0: uart@b0050000 { cell-index = <0>; compatible = "sirf,prima2-uart"; - reg = <0xb0050000 0x10000>; + reg = <0xb0050000 0x1000>; interrupts = <17>; + fifosize = <128>; clocks = <&clks 13>; + sirf,uart-dma-rx-channel = <21>; + sirf,uart-dma-tx-channel = <2>; }; uart1: uart@b0060000 { cell-index = <1>; compatible = "sirf,prima2-uart"; - reg = <0xb0060000 0x10000>; + reg = <0xb0060000 0x1000>; interrupts = <18>; + fifosize = <32>; clocks = <&clks 14>; }; uart2: uart@b0070000 { cell-index = <2>; compatible = "sirf,prima2-uart"; - reg = <0xb0070000 0x10000>; + reg = <0xb0070000 0x1000>; interrupts = <19>; + fifosize = <128>; clocks = <&clks 15>; + sirf,uart-dma-rx-channel = <6>; + sirf,uart-dma-tx-channel = <7>; }; usp0: usp@b0080000 { @@ -222,7 +229,10 @@ compatible = "sirf,prima2-usp"; reg = <0xb0080000 0x10000>; interrupts = <20>; + fifosize = <128>; clocks = <&clks 28>; + sirf,usp-dma-rx-channel = <17>; + sirf,usp-dma-tx-channel = <18>; }; usp1: usp@b0090000 { @@ -230,7 +240,10 @@ compatible = "sirf,prima2-usp"; reg = <0xb0090000 0x10000>; interrupts = <21>; + fifosize = <128>; clocks = <&clks 29>; + sirf,usp-dma-rx-channel = <14>; + sirf,usp-dma-tx-channel = <15>; }; usp2: usp@b00a0000 { @@ -238,7 +251,10 @@ compatible = "sirf,prima2-usp"; reg = <0xb00a0000 0x10000>; interrupts = <22>; + fifosize = <128>; clocks = <&clks 30>; + sirf,usp-dma-rx-channel = <10>; + sirf,usp-dma-tx-channel = <11>; }; dmac0: dma-controller@b00b0000 { From 3349a4b9019b57876b25c694025d96f519b795bc Mon Sep 17 00:00:00 2001 From: Barry Song Date: Mon, 23 Sep 2013 23:42:02 +0800 Subject: [PATCH 237/459] ARM: dts: makefile: build atlas6-evb.dtb for ARCH_ATLAS6 Makefile missed to include atlas6-evb.dtb for ARCH_ATLAS6. Signed-off-by: Barry Song Signed-off-by: Olof Johansson --- arch/arm/boot/dts/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e95af3f5433b..802720e3e8fd 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -41,6 +41,8 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb +dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \ bcm28155-ap.dtb From 9e85b9d1006738a45123ea3fe92ad74e5622ffbc Mon Sep 17 00:00:00 2001 From: Barry Song Date: Tue, 24 Sep 2013 00:04:18 +0800 Subject: [PATCH 238/459] ARM: dts: sirf: fix the ranges of peri-iobrg of prima2 we lost an address range <0x56000000 0x56000000 0x1b00000> for peri-iobg of prima2. Signed-off-by: Barry Song Signed-off-by: Olof Johansson --- arch/arm/boot/dts/prima2.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index c52faea063a2..a88eda93bccb 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -171,7 +171,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0xb0000000 0xb0000000 0x180000>; + ranges = <0xb0000000 0xb0000000 0x180000>, + <0x56000000 0x56000000 0x1b00000>; timer@b0020000 { compatible = "sirf,prima2-tick"; From 262bcc1d6f8a1b0077eaca00d0834c03573f1b92 Mon Sep 17 00:00:00 2001 From: Renwei Wu Date: Mon, 23 Sep 2013 23:57:11 +0800 Subject: [PATCH 239/459] ARM: dts: sirf: fix interrupt and dma prop of VIP for prima2 and atlas6 the current dts is lacking interrupt and dma prop for video input processor of prima2 and atlas6, this patch fixes it. Signed-off-by: Renwei Wu Signed-off-by: Barry Song Signed-off-by: Olof Johansson --- arch/arm/boot/dts/atlas6.dtsi | 2 ++ arch/arm/boot/dts/prima2.dtsi | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 3dccc3ab33a3..6db4f81d4795 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -247,6 +247,8 @@ compatible = "sirf,prima2-vip"; reg = <0xb00C0000 0x10000>; clocks = <&clks 31>; + interrupts = <14>; + sirf,vip-dma-rx-channel = <16>; }; spi0: spi@b00d0000 { diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index a88eda93bccb..27ed9f5144bc 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -278,6 +278,8 @@ compatible = "sirf,prima2-vip"; reg = <0xb00C0000 0x10000>; clocks = <&clks 31>; + interrupts = <14>; + sirf,vip-dma-rx-channel = <16>; }; spi0: spi@b00d0000 { From 64270d82d4bf7fb8e5347c41ea7d0477aa551391 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Fri, 27 Sep 2013 16:54:42 +0100 Subject: [PATCH 240/459] ARM: vexpress: tc2: fix hotplug/idle/kexec race on cluster power down On the TC2 testchip, when all CPUs in a cluster enter standbywfi and commit a power down request, the power controller will wait for standbywfil2 coming from L2 cache controller to shut the cluster down. By the time all CPUs in a cluster commit a power down request and enter wfi, the power controller cannot backtrack, or put it another way, a CPU must not be allowed to complete execution independently of the power controller, the only way for it to resume properly must be upon wake-up IRQ pending and subsequent reset triggered from the power controller. Current MCPM back-end for TC2 disables the GIC CPU IF only when power down is committed through the tc2_pm_suspend() method, that makes sense since a suspended CPU is still online and can receive interrupts whereas a hotplugged CPU, since it is offline, migrated all IRQs and shutdown the per-CPU peripherals, hence their PPIs. The flaw with this reasoning is the following. If all CPUs in a clusters are entering a power down state either through CPU idle or CPU hotplug, when the last man successfully completes the MCPM power down sequence (and executes wfi), power controller waits for L2 wfi signal to quiesce the cluster and shut it down. If, when all CPUs are sitting in wfi, an online CPU hotplugs back in one of the CPUs in the cluster being shutdown, that CPU receives an IPI that causes wfi to complete (since tc2_pm_down() method does not disable the GIC CPU IF in that case - CPU being hotplugged out, not idle) and the power controller will never see the stanbywfil2 signal coming from L2 that is required for shutdown to happen and the system deadlocks. Further to this issue, kexec hotplugs secondary CPUs out during kernel reload/restart. Because kexec may (deliberately) trash the old kernel text, it is not OK for CPUs to follow the MCPM soft reboot path, since instructions after the WFI may have been replaced by kexec. If tc2_pm_down() does not disable the GIC cpu interface, there is a race between CPU powerdown in the old kernel and the IPI from the new kernel that triggers secondary boot, particularly if the powerdown is slow (due to L2 cache cleaning for example). If the new kernel wins the race, the affected CPU(s) will not really be reset and may execute garbage after the WFI. The only solution to this problem consists in disabling the GIC CPU IF on a CPU committed to power down regardless of the power down entry method (CPU hotplug or CPU idle). This way, CPU wake-up is under power controller control, which prevents unexpected wfi exit caused by a pending IRQ. This patch moves the GIC CPU IF disable call in the TC2 MCPM implementation from the tc2_pm_suspend() method to the tc2_pm_down() method to fix the mentioned race condition(s). Reviewed-by: Dave Martin Tested-by: Dave Martin (for kexec) Signed-off-by: Sudeep KarkadaNagesha Signed-off-by: Lorenzo Pieralisi Acked-by: Nicolas Pitre Signed-off-by: Olof Johansson --- arch/arm/mach-vexpress/tc2_pm.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c index 7aeb5d60e484..e6eb48192912 100644 --- a/arch/arm/mach-vexpress/tc2_pm.c +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -131,6 +131,16 @@ static void tc2_pm_down(u64 residency) } else BUG(); + /* + * If the CPU is committed to power down, make sure + * the power controller will be in charge of waking it + * up upon IRQ, ie IRQ lines are cut from GIC CPU IF + * to the CPU by disabling the GIC CPU IF to prevent wfi + * from completing execution behind power controller back + */ + if (!skip_wfi) + gic_cpu_if_down(); + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { arch_spin_unlock(&tc2_pm_lock); @@ -231,7 +241,6 @@ static void tc2_pm_suspend(u64 residency) cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point)); - gic_cpu_if_down(); tc2_pm_down(residency); } From 6cdaca481f6c415025c2687c109674919aa61934 Mon Sep 17 00:00:00 2001 From: Joel Fernandes Date: Thu, 26 Sep 2013 16:55:46 -0500 Subject: [PATCH 241/459] ARM: edma: Fix clearing of unused list for DT DMA resources HWMOD removal for MMC is breaking edma_start as the events are being manually triggered due to unused channel list not being clear. The above issue is fixed by reading the "dmas" property from the DT node if it exists and clearing the bits in the unused channel list if the dma controller used by any device is EDMA. For this purpose we use the of_* helpers to parse the arguments in the dmas phandle list. Also introduced is a minor clean up of a checkpatch error in old code. Reviewed-by: Sekhar Nori Reported-by: Balaji T K Cc: Sekhar Nori Cc: Tony Lindgren Cc: Olof Johansson Cc: Nishanth Menon Cc: Pantel Antoniou Cc: Jason Kridner Cc: Koen Kooi Signed-off-by: Joel Fernandes Signed-off-by: Olof Johansson --- arch/arm/common/edma.c | 38 +++++++++++++++++++++++++++++++------- 1 file changed, 31 insertions(+), 7 deletions(-) diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 117f955a2a06..8e1a0245907f 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -269,6 +269,11 @@ static const struct edmacc_param dummy_paramset = { .ccnt = 1, }; +static const struct of_device_id edma_of_ids[] = { + { .compatible = "ti,edma3", }, + {} +}; + /*****************************************************************************/ static void map_dmach_queue(unsigned ctlr, unsigned ch_no, @@ -560,14 +565,38 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id, static int prepare_unused_channel_list(struct device *dev, void *data) { struct platform_device *pdev = to_platform_device(dev); - int i, ctlr; + int i, count, ctlr; + struct of_phandle_args dma_spec; + if (dev->of_node) { + count = of_property_count_strings(dev->of_node, "dma-names"); + if (count < 0) + return 0; + for (i = 0; i < count; i++) { + if (of_parse_phandle_with_args(dev->of_node, "dmas", + "#dma-cells", i, + &dma_spec)) + continue; + + if (!of_match_node(edma_of_ids, dma_spec.np)) { + of_node_put(dma_spec.np); + continue; + } + + clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]), + edma_cc[0]->edma_unused); + of_node_put(dma_spec.np); + } + return 0; + } + + /* For non-OF case */ for (i = 0; i < pdev->num_resources; i++) { if ((pdev->resource[i].flags & IORESOURCE_DMA) && (int)pdev->resource[i].start >= 0) { ctlr = EDMA_CTLR(pdev->resource[i].start); clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start), - edma_cc[ctlr]->edma_unused); + edma_cc[ctlr]->edma_unused); } } @@ -1762,11 +1791,6 @@ static int edma_probe(struct platform_device *pdev) return 0; } -static const struct of_device_id edma_of_ids[] = { - { .compatible = "ti,edma3", }, - {} -}; - static struct platform_driver edma_driver = { .driver = { .name = "edma", From 05f30e8dfa704e4bfff91856f74b6486ce89a2d1 Mon Sep 17 00:00:00 2001 From: Barry Song <21cnbao@gmail.com> Date: Sun, 29 Sep 2013 22:45:09 +0800 Subject: [PATCH 242/459] MAINTAINERS: ARM: SIRF: add missed drivers into maintain list Take more drivers into maintain list of CSR SiRF SoC machines. Signed-off-by: Barry Song Signed-off-by: Olof Johansson --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index e61c2e83fc2b..a663819423d8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -829,10 +829,16 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git S: Maintained F: arch/arm/mach-prima2/ +F: drivers/clk/clk-prima2.c +F: drivers/clocksource/timer-prima2.c +F: drivers/clocksource/timer-marco.c F: drivers/dma/sirf-dma.c F: drivers/i2c/busses/i2c-sirf.c +F: drivers/input/misc/sirfsoc-onkey.c +F: drivers/irqchip/irq-sirfsoc.c F: drivers/mmc/host/sdhci-sirf.c F: drivers/pinctrl/sirf/ +F: drivers/rtc/rtc-sirfsoc.c F: drivers/spi/spi-sirf.c ARM/EBSA110 MACHINE SUPPORT From 5abf58bf4cd0ab32b9737ea3d1cb6439ab646ad6 Mon Sep 17 00:00:00 2001 From: Barry Song <21cnbao@gmail.com> Date: Sun, 29 Sep 2013 22:45:10 +0800 Subject: [PATCH 243/459] MAINTAINERS: ARM: SIRF: use kernel.org mail box Change my email to kernel.org which is easier for me to catch. Signed-off-by: Barry Song Signed-off-by: Olof Johansson --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index a663819423d8..9d96b9c16c76 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -824,7 +824,7 @@ S: Maintained F: arch/arm/mach-gemini/ ARM/CSR SIRFPRIMA2 MACHINE SUPPORT -M: Barry Song +M: Barry Song L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git S: Maintained From bd737fea4e49b7c0e848e3765c6b45a858de41a8 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 27 Sep 2013 08:37:59 +0200 Subject: [PATCH 244/459] ARM: at91: sam9g45: shutdown ddr1 too when rebooting Like we are doing on DDR0 we need to cleanly shutdown DDR1 if it is used before rebooting. If DDR1 is not initialized, we check it and avoid dereferencing its address. Even by adding two more instructions, we are able to complete the procedure within a single cache line. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre Signed-off-by: Olof Johansson --- arch/arm/mach-at91/at91sam9g45_reset.S | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S index 721a1a34dd1d..c40c1e2ef80f 100644 --- a/arch/arm/mach-at91/at91sam9g45_reset.S +++ b/arch/arm/mach-at91/at91sam9g45_reset.S @@ -16,11 +16,17 @@ #include "at91_rstc.h" .arm +/* + * at91_ramc_base is an array void* + * init at NULL if only one DDR controler is present in or DT + */ .globl at91sam9g45_restart at91sam9g45_restart: ldr r5, =at91_ramc_base @ preload constants ldr r0, [r5] + ldr r5, [r5, #4] @ ddr1 + cmp r5, #0 ldr r4, =at91_rstc_base ldr r1, [r4] @@ -30,6 +36,8 @@ at91sam9g45_restart: .balign 32 @ align to cache line + strne r2, [r5, #AT91_DDRSDRC_RTR] @ disable DDR1 access + strne r3, [r5, #AT91_DDRSDRC_LPR] @ power down DDR1 str r2, [r0, #AT91_DDRSDRC_RTR] @ disable DDR0 access str r3, [r0, #AT91_DDRSDRC_LPR] @ power down DDR0 str r4, [r1, #AT91_RSTC_CR] @ reset processor From aab1728915420b5288cd0fc7b5bd320105b48983 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 30 Sep 2013 19:40:56 +0200 Subject: [PATCH 245/459] PM / hibernate: Fix user space driven resume regression Recent commit 8fd37a4 (PM / hibernate: Create memory bitmaps after freezing user space) broke the resume part of the user space driven hibernation (s2disk), because I forgot that the resume utility loaded the image into memory without freezing user space (it still freezes tasks after loading the image). This means that during user space driven resume we need to create the memory bitmaps at the "device open" time rather than at the "freeze tasks" time, so make that happen (that's a special case anyway, so it needs to be treated in a special way). Reported-and-tested-by: Ronald Signed-off-by: Rafael J. Wysocki --- kernel/power/snapshot.c | 5 ++++- kernel/power/user.c | 8 ++++++++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c index 358a146fd4da..98c3b34a4cff 100644 --- a/kernel/power/snapshot.c +++ b/kernel/power/snapshot.c @@ -743,7 +743,10 @@ int create_basic_memory_bitmaps(void) struct memory_bitmap *bm1, *bm2; int error = 0; - BUG_ON(forbidden_pages_map || free_pages_map); + if (forbidden_pages_map && free_pages_map) + return 0; + else + BUG_ON(forbidden_pages_map || free_pages_map); bm1 = kzalloc(sizeof(struct memory_bitmap), GFP_KERNEL); if (!bm1) diff --git a/kernel/power/user.c b/kernel/power/user.c index 72e8f4fd616d..957f06164ad1 100644 --- a/kernel/power/user.c +++ b/kernel/power/user.c @@ -39,6 +39,7 @@ static struct snapshot_data { char frozen; char ready; char platform_support; + bool free_bitmaps; } snapshot_state; atomic_t snapshot_device_available = ATOMIC_INIT(1); @@ -82,6 +83,10 @@ static int snapshot_open(struct inode *inode, struct file *filp) data->swap = -1; data->mode = O_WRONLY; error = pm_notifier_call_chain(PM_RESTORE_PREPARE); + if (!error) { + error = create_basic_memory_bitmaps(); + data->free_bitmaps = !error; + } if (error) pm_notifier_call_chain(PM_POST_RESTORE); } @@ -111,6 +116,8 @@ static int snapshot_release(struct inode *inode, struct file *filp) pm_restore_gfp_mask(); free_basic_memory_bitmaps(); thaw_processes(); + } else if (data->free_bitmaps) { + free_basic_memory_bitmaps(); } pm_notifier_call_chain(data->mode == O_RDONLY ? PM_POST_HIBERNATION : PM_POST_RESTORE); @@ -231,6 +238,7 @@ static long snapshot_ioctl(struct file *filp, unsigned int cmd, break; pm_restore_gfp_mask(); free_basic_memory_bitmaps(); + data->free_bitmaps = false; thaw_processes(); data->frozen = 0; break; From bb25f13aed6c76df3c0004789485b7c4919ce47a Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 26 Sep 2013 10:56:42 +0530 Subject: [PATCH 246/459] cpufreq: SPEAr: Fix incorrect variable type 'clk_round_rate' returns a negative error code upon failure. This will never get detected by unsigned 'newfreq'. Make it signed. Signed-off-by: Sachin Kamat Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/spear-cpufreq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c index 19e364fa5955..3f418166ce02 100644 --- a/drivers/cpufreq/spear-cpufreq.c +++ b/drivers/cpufreq/spear-cpufreq.c @@ -113,7 +113,7 @@ static int spear_cpufreq_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { struct cpufreq_freqs freqs; - unsigned long newfreq; + long newfreq; struct clk *srcclk; int index, ret, mult = 1; From 43c638e3dd48ff1b1a93ea01c98e258e693880c3 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 26 Sep 2013 11:19:37 +0200 Subject: [PATCH 247/459] cpufreq: cpufreq-cpu0: NULL is a valid regulator, part 2 Since the patch "cpufreq: cpufreq-cpu0: NULL is a valid regulator", cpu_reg contains an error value if the regulator is not set, instead of NULL. Accordingly, fix the remaining check for non-NULL cpu_reg. Signed-off-by: Philipp Zabel Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq-cpu0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index 78c49d8e0f4a..c522a95c0e16 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -229,7 +229,7 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) if (of_property_read_u32(np, "clock-latency", &transition_latency)) transition_latency = CPUFREQ_ETERNAL; - if (cpu_reg) { + if (!IS_ERR(cpu_reg)) { struct opp *opp; unsigned long min_uV, max_uV; int i; From 559835ea7292e2f09304d81eda16f4209433245e Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Tue, 24 Sep 2013 10:25:40 -0700 Subject: [PATCH 248/459] vxlan: Use RCU apis to access sk_user_data. Use of RCU api makes vxlan code easier to understand. It also fixes bug due to missing ACCESS_ONCE() on sk_user_data dereference. In rare case without ACCESS_ONCE() compiler might omit vs on sk_user_data dereference. Compiler can use vs as alias for sk->sk_user_data, resulting in multiple sk_user_data dereference in rcu read context which could change. CC: Jesse Gross Signed-off-by: Pravin B Shelar Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 9 +++------ include/net/sock.h | 5 +++++ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index d1292fe746bc..2ef5b6219f3f 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -952,8 +952,7 @@ void vxlan_sock_release(struct vxlan_sock *vs) spin_lock(&vn->sock_lock); hlist_del_rcu(&vs->hlist); - smp_wmb(); - vs->sock->sk->sk_user_data = NULL; + rcu_assign_sk_user_data(vs->sock->sk, NULL); vxlan_notify_del_rx_port(sk); spin_unlock(&vn->sock_lock); @@ -1048,8 +1047,7 @@ static int vxlan_udp_encap_recv(struct sock *sk, struct sk_buff *skb) port = inet_sk(sk)->inet_sport; - smp_read_barrier_depends(); - vs = (struct vxlan_sock *)sk->sk_user_data; + vs = rcu_dereference_sk_user_data(sk); if (!vs) goto drop; @@ -2302,8 +2300,7 @@ static struct vxlan_sock *vxlan_socket_create(struct net *net, __be16 port, atomic_set(&vs->refcnt, 1); vs->rcv = rcv; vs->data = data; - smp_wmb(); - vs->sock->sk->sk_user_data = vs; + rcu_assign_sk_user_data(vs->sock->sk, vs); spin_lock(&vn->sock_lock); hlist_add_head_rcu(&vs->hlist, vs_head(net, port)); diff --git a/include/net/sock.h b/include/net/sock.h index 6ba2e7b0e2b1..1d37a8086bed 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -409,6 +409,11 @@ struct sock { void (*sk_destruct)(struct sock *sk); }; +#define __sk_user_data(sk) ((*((void __rcu **)&(sk)->sk_user_data))) + +#define rcu_dereference_sk_user_data(sk) rcu_dereference(__sk_user_data((sk))) +#define rcu_assign_sk_user_data(sk, ptr) rcu_assign_pointer(__sk_user_data((sk)), ptr) + /* * SK_CAN_REUSE and SK_NO_REUSE on a socket mean that the socket is OK * or not whether his port will be reused by someone else. SK_FORCE_REUSE From 894116bd0e9b7749a0c4b6c62dec13c2a0ccef68 Mon Sep 17 00:00:00 2001 From: Aida Mynzhasova Date: Wed, 25 Sep 2013 11:24:23 +0400 Subject: [PATCH 249/459] powerpc/83xx: gianfar_ptp: select 1588 clock source through dts file Currently IEEE 1588 timer reference clock source is determined through hard-coded value in gianfar_ptp driver. This patch allows to select ptp clock source by means of device tree file node. For instance: fsl,cksel = <0>; for using external (TSEC_TMR_CLK input) high precision timer reference clock. Other acceptable values: <1> : eTSEC system clock <2> : eTSEC1 transmit clock <3> : RTC clock input When this attribute isn't used, eTSEC system clock will serve as IEEE 1588 timer reference clock. Signed-off-by: Aida Mynzhasova Acked-by: Richard Cochran Signed-off-by: David S. Miller --- .../devicetree/bindings/net/fsl-tsec-phy.txt | 16 +++++++++++++++- drivers/net/ethernet/freescale/gianfar_ptp.c | 4 +++- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index 2c6be0377f55..eb06059f3cf3 100644 --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -86,6 +86,7 @@ General Properties: Clock Properties: + - fsl,cksel Timer reference clock source. - fsl,tclk-period Timer reference clock period in nanoseconds. - fsl,tmr-prsc Prescaler, divides the output clock. - fsl,tmr-add Frequency compensation value. @@ -97,7 +98,7 @@ Clock Properties: clock. You must choose these carefully for the clock to work right. Here is how to figure good values: - TimerOsc = system clock MHz + TimerOsc = selected reference clock MHz tclk_period = desired clock period nanoseconds NominalFreq = 1000 / tclk_period MHz FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0) @@ -114,6 +115,18 @@ Clock Properties: Pulse Per Second (PPS) signal, since this will be offered to the PPS subsystem to synchronize the Linux clock. + "fsl,cksel" property allows to select different reference clock + sources: + + <0> - external high precision timer reference clock (TSEC_TMR_CLK + input is used for this purpose); + <1> - eTSEC system clock; + <2> - eTSEC1 transmit clock; + <3> - RTC clock input. + + When this attribute is not used, eTSEC system clock will serve as + IEEE 1588 timer reference clock. + Example: ptp_clock@24E00 { @@ -121,6 +134,7 @@ Example: reg = <0x24E00 0xB0>; interrupts = <12 0x8 13 0x8>; interrupt-parent = < &ipic >; + fsl,cksel = <1>; fsl,tclk-period = <10>; fsl,tmr-prsc = <100>; fsl,tmr-add = <0x999999A4>; diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c index 098f133908ae..e006a09ba899 100644 --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -452,7 +452,9 @@ static int gianfar_ptp_probe(struct platform_device *dev) err = -ENODEV; etsects->caps = ptp_gianfar_caps; - etsects->cksel = DEFAULT_CKSEL; + + if (get_of_u32(node, "fsl,cksel", &etsects->cksel)) + etsects->cksel = DEFAULT_CKSEL; if (get_of_u32(node, "fsl,tclk-period", &etsects->tclk_period) || get_of_u32(node, "fsl,tmr-prsc", &etsects->tmr_prsc) || From 2d77f343343c4f38b8f94be1964bbbc6456a147f Mon Sep 17 00:00:00 2001 From: Aleksander Morgado Date: Wed, 25 Sep 2013 17:02:36 +0200 Subject: [PATCH 250/459] net: qmi_wwan: fix Cinterion PLXX product ID MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cinterion PLXX LTE devices have a 0x0060 product ID, not 0x12d1. The blacklisting in the serial/option driver does actually use the correct PID, as per commit 8ff10bdb14a52e3f25d4ce09e0582a8684c1a6db ('USB: Blacklisted Cinterion's PLxx WWAN Interface'). CC: Hans-Christoph Schemmel CC: Christian Schmiedl CC: Nicolaus Colberg Signed-off-by: Aleksander Morgado Acked-by: Bjørn Mork Acked-by: Christian Schmiedl Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 6312332afeba..3d6aaf79d8b2 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -714,7 +714,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ - {QMI_FIXED_INTF(0x1e2d, 0x12d1, 4)}, /* Cinterion PLxx */ + {QMI_FIXED_INTF(0x1e2d, 0x0060, 4)}, /* Cinterion PLxx */ /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ From d4a71b155c12d0d429c6b69d94076d6d57e2a7a7 Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Wed, 25 Sep 2013 09:57:47 -0700 Subject: [PATCH 251/459] ip_tunnel: Do not use stale inner_iph pointer. While sending packet skb_cow_head() can change skb header which invalidates inner_iph pointer to skb header. Following patch avoid using it. Found by code inspection. This bug was introduced by commit 0e6fbc5b6c6218 (ip_tunnels: extend iptunnel_xmit()). Signed-off-by: Pravin B Shelar Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/ip_tunnel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index ac9fabe0300f..d3fbad422e0e 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -623,6 +623,7 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, tunnel->err_count = 0; } + tos = ip_tunnel_ecn_encap(tos, inner_iph, skb); ttl = tnl_params->ttl; if (ttl == 0) { if (skb->protocol == htons(ETH_P_IP)) @@ -651,8 +652,7 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, } err = iptunnel_xmit(rt, skb, fl4.saddr, fl4.daddr, protocol, - ip_tunnel_ecn_encap(tos, inner_iph, skb), ttl, df, - !net_eq(tunnel->net, dev_net(dev))); + tos, ttl, df, !net_eq(tunnel->net, dev_net(dev))); iptunnel_xmit_stats(err, &dev->stats, dev->tstats); return; From c9d55d5bff05084b5829f751aebd03d0c8f632f5 Mon Sep 17 00:00:00 2001 From: Paul Marks Date: Wed, 25 Sep 2013 15:12:55 -0700 Subject: [PATCH 252/459] ipv6: Fix preferred_lft not updating in some cases Consider the scenario where an IPv6 router is advertising a fixed preferred_lft of 1800 seconds, while the valid_lft begins at 3600 seconds and counts down in realtime. A client should reset its preferred_lft to 1800 every time the RA is received, but a bug is causing Linux to ignore the update. The core problem is here: if (prefered_lft != ifp->prefered_lft) { Note that ifp->prefered_lft is an offset, so it doesn't decrease over time. Thus, the comparison is always (1800 != 1800), which fails to trigger an update. The most direct solution would be to compute a "stored_prefered_lft", and use that value in the comparison. But I think that trying to filter out unnecessary updates here is a premature optimization. In order for the filter to apply, both of these would need to hold: - The advertised valid_lft and preferred_lft are both declining in real time. - No clock skew exists between the router & client. So in this patch, I've set "update_lft = 1" unconditionally, which allows the surrounding code to be greatly simplified. Signed-off-by: Paul Marks Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 52 +++++++++++++-------------------------------- 1 file changed, 15 insertions(+), 37 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index a0c3abe72461..cd3fb301da38 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -2220,43 +2220,21 @@ ok: else stored_lft = 0; if (!update_lft && !create && stored_lft) { - if (valid_lft > MIN_VALID_LIFETIME || - valid_lft > stored_lft) - update_lft = 1; - else if (stored_lft <= MIN_VALID_LIFETIME) { - /* valid_lft <= stored_lft is always true */ - /* - * RFC 4862 Section 5.5.3e: - * "Note that the preferred lifetime of - * the corresponding address is always - * reset to the Preferred Lifetime in - * the received Prefix Information - * option, regardless of whether the - * valid lifetime is also reset or - * ignored." - * - * So if the preferred lifetime in - * this advertisement is different - * than what we have stored, but the - * valid lifetime is invalid, just - * reset prefered_lft. - * - * We must set the valid lifetime - * to the stored lifetime since we'll - * be updating the timestamp below, - * else we'll set it back to the - * minimum. - */ - if (prefered_lft != ifp->prefered_lft) { - valid_lft = stored_lft; - update_lft = 1; - } - } else { - valid_lft = MIN_VALID_LIFETIME; - if (valid_lft < prefered_lft) - prefered_lft = valid_lft; - update_lft = 1; - } + const u32 minimum_lft = min( + stored_lft, (u32)MIN_VALID_LIFETIME); + valid_lft = max(valid_lft, minimum_lft); + + /* RFC4862 Section 5.5.3e: + * "Note that the preferred lifetime of the + * corresponding address is always reset to + * the Preferred Lifetime in the received + * Prefix Information option, regardless of + * whether the valid lifetime is also reset or + * ignored." + * + * So we should always update prefered_lft here. + */ + update_lft = 1; } if (update_lft) { From ea732dff5cfa10789007bf4a5b935388a0bb2a8f Mon Sep 17 00:00:00 2001 From: Paul Durrant Date: Thu, 26 Sep 2013 12:09:52 +0100 Subject: [PATCH 253/459] xen-netback: Handle backend state transitions in a more robust way When the frontend state changes netback now specifies its desired state to a new function, set_backend_state(), which transitions through any necessary intermediate states. This fixes an issue observed with some old Windows frontend drivers where they failed to transition through the Closing state and netback would not behave correctly. Signed-off-by: Paul Durrant Cc: Ian Campbell Cc: Wei Liu Cc: David Vrabel Acked-by: Ian Campbell Signed-off-by: David S. Miller --- drivers/net/xen-netback/xenbus.c | 148 ++++++++++++++++++++++++------- 1 file changed, 118 insertions(+), 30 deletions(-) diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c index a53782ef1540..b45bce20ad76 100644 --- a/drivers/net/xen-netback/xenbus.c +++ b/drivers/net/xen-netback/xenbus.c @@ -24,6 +24,12 @@ struct backend_info { struct xenbus_device *dev; struct xenvif *vif; + + /* This is the state that will be reflected in xenstore when any + * active hotplug script completes. + */ + enum xenbus_state state; + enum xenbus_state frontend_state; struct xenbus_watch hotplug_status_watch; u8 have_hotplug_status_watch:1; @@ -136,6 +142,8 @@ static int netback_probe(struct xenbus_device *dev, if (err) goto fail; + be->state = XenbusStateInitWait; + /* This kicks hotplug scripts, so do it immediately. */ backend_create_xenvif(be); @@ -208,24 +216,113 @@ static void backend_create_xenvif(struct backend_info *be) kobject_uevent(&dev->dev.kobj, KOBJ_ONLINE); } - -static void disconnect_backend(struct xenbus_device *dev) +static void backend_disconnect(struct backend_info *be) { - struct backend_info *be = dev_get_drvdata(&dev->dev); - if (be->vif) xenvif_disconnect(be->vif); } -static void destroy_backend(struct xenbus_device *dev) +static void backend_connect(struct backend_info *be) { - struct backend_info *be = dev_get_drvdata(&dev->dev); + if (be->vif) + connect(be); +} - if (be->vif) { - kobject_uevent(&dev->dev.kobj, KOBJ_OFFLINE); - xenbus_rm(XBT_NIL, dev->nodename, "hotplug-status"); - xenvif_free(be->vif); - be->vif = NULL; +static inline void backend_switch_state(struct backend_info *be, + enum xenbus_state state) +{ + struct xenbus_device *dev = be->dev; + + pr_debug("%s -> %s\n", dev->nodename, xenbus_strstate(state)); + be->state = state; + + /* If we are waiting for a hotplug script then defer the + * actual xenbus state change. + */ + if (!be->have_hotplug_status_watch) + xenbus_switch_state(dev, state); +} + +/* Handle backend state transitions: + * + * The backend state starts in InitWait and the following transitions are + * allowed. + * + * InitWait -> Connected + * + * ^ \ | + * | \ | + * | \ | + * | \ | + * | \ | + * | \ | + * | V V + * + * Closed <-> Closing + * + * The state argument specifies the eventual state of the backend and the + * function transitions to that state via the shortest path. + */ +static void set_backend_state(struct backend_info *be, + enum xenbus_state state) +{ + while (be->state != state) { + switch (be->state) { + case XenbusStateClosed: + switch (state) { + case XenbusStateInitWait: + case XenbusStateConnected: + pr_info("%s: prepare for reconnect\n", + be->dev->nodename); + backend_switch_state(be, XenbusStateInitWait); + break; + case XenbusStateClosing: + backend_switch_state(be, XenbusStateClosing); + break; + default: + BUG(); + } + break; + case XenbusStateInitWait: + switch (state) { + case XenbusStateConnected: + backend_connect(be); + backend_switch_state(be, XenbusStateConnected); + break; + case XenbusStateClosing: + case XenbusStateClosed: + backend_switch_state(be, XenbusStateClosing); + break; + default: + BUG(); + } + break; + case XenbusStateConnected: + switch (state) { + case XenbusStateInitWait: + case XenbusStateClosing: + case XenbusStateClosed: + backend_disconnect(be); + backend_switch_state(be, XenbusStateClosing); + break; + default: + BUG(); + } + break; + case XenbusStateClosing: + switch (state) { + case XenbusStateInitWait: + case XenbusStateConnected: + case XenbusStateClosed: + backend_switch_state(be, XenbusStateClosed); + break; + default: + BUG(); + } + break; + default: + BUG(); + } } } @@ -237,40 +334,33 @@ static void frontend_changed(struct xenbus_device *dev, { struct backend_info *be = dev_get_drvdata(&dev->dev); - pr_debug("frontend state %s\n", xenbus_strstate(frontend_state)); + pr_debug("%s -> %s\n", dev->otherend, xenbus_strstate(frontend_state)); be->frontend_state = frontend_state; switch (frontend_state) { case XenbusStateInitialising: - if (dev->state == XenbusStateClosed) { - pr_info("%s: prepare for reconnect\n", dev->nodename); - xenbus_switch_state(dev, XenbusStateInitWait); - } + set_backend_state(be, XenbusStateInitWait); break; case XenbusStateInitialised: break; case XenbusStateConnected: - if (dev->state == XenbusStateConnected) - break; - if (be->vif) - connect(be); + set_backend_state(be, XenbusStateConnected); break; case XenbusStateClosing: - disconnect_backend(dev); - xenbus_switch_state(dev, XenbusStateClosing); + set_backend_state(be, XenbusStateClosing); break; case XenbusStateClosed: - xenbus_switch_state(dev, XenbusStateClosed); + set_backend_state(be, XenbusStateClosed); if (xenbus_dev_is_online(dev)) break; - destroy_backend(dev); /* fall through if not online */ case XenbusStateUnknown: + set_backend_state(be, XenbusStateClosed); device_unregister(&dev->dev); break; @@ -363,7 +453,9 @@ static void hotplug_status_changed(struct xenbus_watch *watch, if (IS_ERR(str)) return; if (len == sizeof("connected")-1 && !memcmp(str, "connected", len)) { - xenbus_switch_state(be->dev, XenbusStateConnected); + /* Complete any pending state change */ + xenbus_switch_state(be->dev, be->state); + /* Not interested in this watch anymore. */ unregister_hotplug_status_watch(be); } @@ -393,12 +485,8 @@ static void connect(struct backend_info *be) err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, hotplug_status_changed, "%s/%s", dev->nodename, "hotplug-status"); - if (err) { - /* Switch now, since we can't do a watch. */ - xenbus_switch_state(dev, XenbusStateConnected); - } else { + if (!err) be->have_hotplug_status_watch = 1; - } netif_wake_queue(be->vif->dev); } From 8386040b76a46885280b9b19f7080bf7fb558fca Mon Sep 17 00:00:00 2001 From: Wei Liu Date: Thu, 26 Sep 2013 12:41:53 +0100 Subject: [PATCH 254/459] MAINTAINERS: add myself as maintainer of xen-netback Signed-off-by: Wei Liu Acked-by: Ian Campbell Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index e61c2e83fc2b..3c441cef91b8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9366,6 +9366,7 @@ F: arch/arm64/include/asm/xen/ XEN NETWORK BACKEND DRIVER M: Ian Campbell +M: Wei Liu L: xen-devel@lists.xenproject.org (moderated for non-subscribers) L: netdev@vger.kernel.org S: Supported From b86783587b3d1d552326d955acee37eac48800f1 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 26 Sep 2013 08:44:06 -0700 Subject: [PATCH 255/459] net: flow_dissector: fix thoff for IPPROTO_AH In commit 8ed781668dd49 ("flow_keys: include thoff into flow_keys for later usage"), we missed that existing code was using nhoff as a temporary variable that could not always contain transport header offset. This is not a problem for TCP/UDP because port offset (@poff) is 0 for these protocols. Signed-off-by: Eric Dumazet Cc: Daniel Borkmann Cc: Nikolay Aleksandrov Acked-by: Nikolay Aleksandrov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- net/core/flow_dissector.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c index 1929af87b260..8d7d0dd72db2 100644 --- a/net/core/flow_dissector.c +++ b/net/core/flow_dissector.c @@ -154,8 +154,8 @@ ipv6: if (poff >= 0) { __be32 *ports, _ports; - nhoff += poff; - ports = skb_header_pointer(skb, nhoff, sizeof(_ports), &_ports); + ports = skb_header_pointer(skb, nhoff + poff, + sizeof(_ports), &_ports); if (ports) flow->ports = *ports; } From 8d34ce10c59b40e0ce2685341c4e93416f505e45 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 27 Sep 2013 14:20:01 -0700 Subject: [PATCH 256/459] pkt_sched: fq: qdisc dismantle fixes fq_reset() should drops all packets in queue, including throttled flows. This patch moves code from fq_destroy() to fq_reset() to do the cleaning. fq_change() must stop calling fq_dequeue() if all remaining packets are from throttled flows. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/sch_fq.c | 57 ++++++++++++++++++++++++++++++---------------- 1 file changed, 37 insertions(+), 20 deletions(-) diff --git a/net/sched/sch_fq.c b/net/sched/sch_fq.c index 32ad015ee8ce..fc6de56a331e 100644 --- a/net/sched/sch_fq.c +++ b/net/sched/sch_fq.c @@ -285,7 +285,7 @@ static struct fq_flow *fq_classify(struct sk_buff *skb, struct fq_sched_data *q) /* remove one skb from head of flow queue */ -static struct sk_buff *fq_dequeue_head(struct fq_flow *flow) +static struct sk_buff *fq_dequeue_head(struct Qdisc *sch, struct fq_flow *flow) { struct sk_buff *skb = flow->head; @@ -293,6 +293,8 @@ static struct sk_buff *fq_dequeue_head(struct fq_flow *flow) flow->head = skb->next; skb->next = NULL; flow->qlen--; + sch->qstats.backlog -= qdisc_pkt_len(skb); + sch->q.qlen--; } return skb; } @@ -419,7 +421,7 @@ static struct sk_buff *fq_dequeue(struct Qdisc *sch) struct sk_buff *skb; struct fq_flow *f; - skb = fq_dequeue_head(&q->internal); + skb = fq_dequeue_head(sch, &q->internal); if (skb) goto out; fq_check_throttled(q, now); @@ -449,7 +451,7 @@ begin: goto begin; } - skb = fq_dequeue_head(f); + skb = fq_dequeue_head(sch, f); if (!skb) { head->first = f->next; /* force a pass through old_flows to prevent starvation */ @@ -490,19 +492,44 @@ begin: } } out: - sch->qstats.backlog -= qdisc_pkt_len(skb); qdisc_bstats_update(sch, skb); - sch->q.qlen--; qdisc_unthrottled(sch); return skb; } static void fq_reset(struct Qdisc *sch) { + struct fq_sched_data *q = qdisc_priv(sch); + struct rb_root *root; struct sk_buff *skb; + struct rb_node *p; + struct fq_flow *f; + unsigned int idx; - while ((skb = fq_dequeue(sch)) != NULL) + while ((skb = fq_dequeue_head(sch, &q->internal)) != NULL) kfree_skb(skb); + + if (!q->fq_root) + return; + + for (idx = 0; idx < (1U << q->fq_trees_log); idx++) { + root = &q->fq_root[idx]; + while ((p = rb_first(root)) != NULL) { + f = container_of(p, struct fq_flow, fq_node); + rb_erase(p, root); + + while ((skb = fq_dequeue_head(sch, f)) != NULL) + kfree_skb(skb); + + kmem_cache_free(fq_flow_cachep, f); + } + } + q->new_flows.first = NULL; + q->old_flows.first = NULL; + q->delayed = RB_ROOT; + q->flows = 0; + q->inactive_flows = 0; + q->throttled_flows = 0; } static void fq_rehash(struct fq_sched_data *q, @@ -645,6 +672,8 @@ static int fq_change(struct Qdisc *sch, struct nlattr *opt) while (sch->q.qlen > sch->limit) { struct sk_buff *skb = fq_dequeue(sch); + if (!skb) + break; kfree_skb(skb); drop_count++; } @@ -657,21 +686,9 @@ static int fq_change(struct Qdisc *sch, struct nlattr *opt) static void fq_destroy(struct Qdisc *sch) { struct fq_sched_data *q = qdisc_priv(sch); - struct rb_root *root; - struct rb_node *p; - unsigned int idx; - if (q->fq_root) { - for (idx = 0; idx < (1U << q->fq_trees_log); idx++) { - root = &q->fq_root[idx]; - while ((p = rb_first(root)) != NULL) { - rb_erase(p, root); - kmem_cache_free(fq_flow_cachep, - container_of(p, struct fq_flow, fq_node)); - } - } - kfree(q->fq_root); - } + fq_reset(sch); + kfree(q->fq_root); qdisc_watchdog_cancel(&q->watchdog); } From bc4c9612922524ce3eba64c5e7d6323f8e174ca1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Sat, 21 Sep 2013 16:21:00 +0100 Subject: [PATCH 257/459] iio: Remove debugfs entries in iio_device_unregister() Remove the the debugfs entries in iio_device_unregister(). Otherwise the debugfs entries might still be accessible even though the device used in the debugfs callback has already been freed. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/industrialio-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 8e84cd522e49..f95c6979efd8 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -852,7 +852,6 @@ static void iio_dev_release(struct device *device) iio_device_unregister_trigger_consumer(indio_dev); iio_device_unregister_eventset(indio_dev); iio_device_unregister_sysfs(indio_dev); - iio_device_unregister_debugfs(indio_dev); ida_simple_remove(&iio_ida, indio_dev->id); kfree(indio_dev); @@ -1087,6 +1086,7 @@ void iio_device_unregister(struct iio_dev *indio_dev) if (indio_dev->chrdev.dev) cdev_del(&indio_dev->chrdev); + iio_device_unregister_debugfs(indio_dev); iio_disable_all_buffers(indio_dev); From 512690daa6cc6dec0a4f776a0f0f3d729b029cf9 Mon Sep 17 00:00:00 2001 From: Denis CIOCCA Date: Tue, 24 Sep 2013 15:51:00 +0100 Subject: [PATCH 258/459] iio:magnetometer: Bugfix magnetometer default output registers Signed-off-by: Denis Ciocca Signed-off-by: Jonathan Cameron --- drivers/iio/magnetometer/st_magn_core.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index e8d2849cc81d..cab3bc7494a2 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -29,9 +29,9 @@ #define ST_MAGN_NUMBER_DATA_CHANNELS 3 /* DEFAULT VALUE FOR SENSORS */ -#define ST_MAGN_DEFAULT_OUT_X_L_ADDR 0X04 -#define ST_MAGN_DEFAULT_OUT_Y_L_ADDR 0X08 -#define ST_MAGN_DEFAULT_OUT_Z_L_ADDR 0X06 +#define ST_MAGN_DEFAULT_OUT_X_H_ADDR 0X03 +#define ST_MAGN_DEFAULT_OUT_Y_H_ADDR 0X07 +#define ST_MAGN_DEFAULT_OUT_Z_H_ADDR 0X05 /* FULLSCALE */ #define ST_MAGN_FS_AVL_1300MG 1300 @@ -117,16 +117,16 @@ static const struct iio_chan_spec st_magn_16bit_channels[] = { ST_SENSORS_LSM_CHANNELS(IIO_MAGN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), - ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16, - ST_MAGN_DEFAULT_OUT_X_L_ADDR), + ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_BE, 16, 16, + ST_MAGN_DEFAULT_OUT_X_H_ADDR), ST_SENSORS_LSM_CHANNELS(IIO_MAGN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), - ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16, - ST_MAGN_DEFAULT_OUT_Y_L_ADDR), + ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_BE, 16, 16, + ST_MAGN_DEFAULT_OUT_Y_H_ADDR), ST_SENSORS_LSM_CHANNELS(IIO_MAGN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), - ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16, - ST_MAGN_DEFAULT_OUT_Z_L_ADDR), + ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_BE, 16, 16, + ST_MAGN_DEFAULT_OUT_Z_H_ADDR), IIO_CHAN_SOFT_TIMESTAMP(3) }; From 7393dc45f6ed5d3aba43b06d49eb3b15f1318906 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Mon, 30 Sep 2013 13:45:01 -0700 Subject: [PATCH 259/459] revert "mm/memory-hotplug: fix lowmem count overflow when offline pages" This reverts commit cea27eb2a202 ("mm/memory-hotplug: fix lowmem count overflow when offline pages"). The fixed bug by commit cea27eb was fixed to another way by commit 3dcc0571cd64 ("mm: correctly update zone->managed_pages"). That commit enhances memory_hotplug.c to adjust totalhigh_pages when hot-removing memory, for details please refer to: http://marc.info/?l=linux-mm&m=136957578620221&w=2 As a result, commit cea27eb2a202 currently causes duplicated decreasing of totalhigh_pages, thus the revert. Signed-off-by: Joonyoung Shim Reviewed-by: Wanpeng Li Cc: Jiang Liu Cc: KOSAKI Motohiro Cc: Bartlomiej Zolnierkiewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 0ee638f76ebe..dd886fac451a 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -6366,10 +6366,6 @@ __offline_isolated_pages(unsigned long start_pfn, unsigned long end_pfn) list_del(&page->lru); rmv_page_order(page); zone->free_area[order].nr_free--; -#ifdef CONFIG_HIGHMEM - if (PageHighMem(page)) - totalhigh_pages -= 1 << order; -#endif for (i = 0; i < (1 << order); i++) SetPageReserved((page+i)); pfn += (1 << order); From 72023656961b8c81a168a7a6762d589339d0d7ec Mon Sep 17 00:00:00 2001 From: Dan Aloni Date: Mon, 30 Sep 2013 13:45:02 -0700 Subject: [PATCH 260/459] fs/binfmt_elf.c: prevent a coredump with a large vm_map_count from Oopsing A high setting of max_map_count, and a process core-dumping with a large enough vm_map_count could result in an NT_FILE note not being written, and the kernel crashing immediately later because it has assumed otherwise. Reproduction of the oops-causing bug described here: https://lkml.org/lkml/2013/8/30/50 Rge ussue originated in commit 2aa362c49c31 ("coredump: extend core dump note section to contain file names of mapped file") from Oct 4, 2012. This patch make that section optional in that case. fill_files_note() should signify the error, and also let the info struct in elf_core_dump() be zero-initialized so that we can check for the optionally written note. [akpm@linux-foundation.org: avoid abusing E2BIG, remove a couple of not-really-needed local variables] [akpm@linux-foundation.org: fix sparse warning] Signed-off-by: Dan Aloni Cc: Al Viro Cc: Denys Vlasenko Reported-by: Martin MOKREJS Tested-by: Martin MOKREJS Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/binfmt_elf.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 100edcc5e312..4c94a79991bb 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -1413,7 +1413,7 @@ static void fill_siginfo_note(struct memelfnote *note, user_siginfo_t *csigdata, * long file_ofs * followed by COUNT filenames in ASCII: "FILE1" NUL "FILE2" NUL... */ -static void fill_files_note(struct memelfnote *note) +static int fill_files_note(struct memelfnote *note) { struct vm_area_struct *vma; unsigned count, size, names_ofs, remaining, n; @@ -1428,11 +1428,11 @@ static void fill_files_note(struct memelfnote *note) names_ofs = (2 + 3 * count) * sizeof(data[0]); alloc: if (size >= MAX_FILE_NOTE_SIZE) /* paranoia check */ - goto err; + return -EINVAL; size = round_up(size, PAGE_SIZE); data = vmalloc(size); if (!data) - goto err; + return -ENOMEM; start_end_ofs = data + 2; name_base = name_curpos = ((char *)data) + names_ofs; @@ -1485,7 +1485,7 @@ static void fill_files_note(struct memelfnote *note) size = name_curpos - (char *)data; fill_note(note, "CORE", NT_FILE, size, data); - err: ; + return 0; } #ifdef CORE_DUMP_USE_REGSET @@ -1686,8 +1686,8 @@ static int fill_note_info(struct elfhdr *elf, int phdrs, fill_auxv_note(&info->auxv, current->mm); info->size += notesize(&info->auxv); - fill_files_note(&info->files); - info->size += notesize(&info->files); + if (fill_files_note(&info->files) == 0) + info->size += notesize(&info->files); return 1; } @@ -1719,7 +1719,8 @@ static int write_note_info(struct elf_note_info *info, return 0; if (first && !writenote(&info->auxv, file, foffset)) return 0; - if (first && !writenote(&info->files, file, foffset)) + if (first && info->files.data && + !writenote(&info->files, file, foffset)) return 0; for (i = 1; i < info->thread_notes; ++i) @@ -1806,6 +1807,7 @@ static int elf_dump_thread_status(long signr, struct elf_thread_status *t) struct elf_note_info { struct memelfnote *notes; + struct memelfnote *notes_files; struct elf_prstatus *prstatus; /* NT_PRSTATUS */ struct elf_prpsinfo *psinfo; /* NT_PRPSINFO */ struct list_head thread_list; @@ -1896,9 +1898,12 @@ static int fill_note_info(struct elfhdr *elf, int phdrs, fill_siginfo_note(info->notes + 2, &info->csigdata, siginfo); fill_auxv_note(info->notes + 3, current->mm); - fill_files_note(info->notes + 4); + info->numnote = 4; - info->numnote = 5; + if (fill_files_note(info->notes + info->numnote) == 0) { + info->notes_files = info->notes + info->numnote; + info->numnote++; + } /* Try to dump the FPU. */ info->prstatus->pr_fpvalid = elf_core_copy_task_fpregs(current, regs, @@ -1960,8 +1965,9 @@ static void free_note_info(struct elf_note_info *info) kfree(list_entry(tmp, struct elf_thread_status, list)); } - /* Free data allocated by fill_files_note(): */ - vfree(info->notes[4].data); + /* Free data possibly allocated by fill_files_note(): */ + if (info->notes_files) + vfree(info->notes_files->data); kfree(info->prstatus); kfree(info->psinfo); @@ -2044,7 +2050,7 @@ static int elf_core_dump(struct coredump_params *cprm) struct vm_area_struct *vma, *gate_vma; struct elfhdr *elf = NULL; loff_t offset = 0, dataoff, foffset; - struct elf_note_info info; + struct elf_note_info info = { }; struct elf_phdr *phdr4note = NULL; struct elf_shdr *shdr4extnum = NULL; Elf_Half e_phnum; From f6ea3adb70b20ae36277a1b0eaaf4da9f6479a28 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Mon, 30 Sep 2013 13:45:03 -0700 Subject: [PATCH 261/459] mm/compaction.c: periodically schedule when freeing pages We've been getting warnings about an excessive amount of time spent allocating pages for migration during memory compaction without scheduling. isolate_freepages_block() already periodically checks for contended locks or the need to schedule, but isolate_freepages() never does. When a zone is massively long and no suitable targets can be found, this iteration can be quite expensive without ever doing cond_resched(). Check periodically for the need to reschedule while the compaction free scanner iterates. Signed-off-by: David Rientjes Reviewed-by: Rik van Riel Reviewed-by: Wanpeng Li Acked-by: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/compaction.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/mm/compaction.c b/mm/compaction.c index c43789388cd8..b5326b141a25 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -677,6 +677,13 @@ static void isolate_freepages(struct zone *zone, pfn -= pageblock_nr_pages) { unsigned long isolated; + /* + * This can iterate a massively long zone without finding any + * suitable migration targets, so periodically check if we need + * to schedule. + */ + cond_resched(); + if (!pfn_valid(pfn)) continue; From 5e9d527591421ccdb16acb8c23662231135d8686 Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Mon, 30 Sep 2013 13:45:04 -0700 Subject: [PATCH 262/459] ipc/sem.c: fix race in sem_lock() The exclusion of complex operations in sem_lock() is insufficient: after acquiring the per-semaphore lock, a simple op must first check that sem_perm.lock is not locked and only after that test check complex_count. The current code does it the other way around - and that creates a race. Details are below. The patch is a complete rewrite of sem_lock(), based in part on the code from Mike Galbraith. It removes all gotos and all loops and thus the risk of livelocks. I have tested the patch (together with the next one) on my i3 laptop and it didn't cause any problems. The bug is probably also present in 3.10 and 3.11, but for these kernels it might be simpler just to move the test of sma->complex_count after the spin_is_locked() test. Details of the bug: Assume: - sma->complex_count = 0. - Thread 1: semtimedop(complex op that must sleep) - Thread 2: semtimedop(simple op). Pseudo-Trace: Thread 1: sem_lock(): acquire sem_perm.lock Thread 1: sem_lock(): check for ongoing simple ops Nothing ongoing, thread 2 is still before sem_lock(). Thread 1: try_atomic_semop() <<< preempted. Thread 2: sem_lock(): static inline int sem_lock(struct sem_array *sma, struct sembuf *sops, int nsops) { int locknum; again: if (nsops == 1 && !sma->complex_count) { struct sem *sem = sma->sem_base + sops->sem_num; /* Lock just the semaphore we are interested in. */ spin_lock(&sem->lock); /* * If sma->complex_count was set while we were spinning, * we may need to look at things we did not lock here. */ if (unlikely(sma->complex_count)) { spin_unlock(&sem->lock); goto lock_array; } <<<<<<<<< <<< complex_count is still 0. <<< <<< Here it is preempted <<<<<<<<< Thread 1: try_atomic_semop() returns, notices that it must sleep. Thread 1: increases sma->complex_count. Thread 1: drops sem_perm.lock Thread 2: /* * Another process is holding the global lock on the * sem_array; we cannot enter our critical section, * but have to wait for the global lock to be released. */ if (unlikely(spin_is_locked(&sma->sem_perm.lock))) { spin_unlock(&sem->lock); spin_unlock_wait(&sma->sem_perm.lock); goto again; } <<< sem_perm.lock already dropped, thus no "goto again;" locknum = sops->sem_num; Signed-off-by: Manfred Spraul Cc: Mike Galbraith Cc: Rik van Riel Cc: Davidlohr Bueso Cc: [3.10+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- ipc/sem.c | 132 ++++++++++++++++++++++++++++++++++-------------------- 1 file changed, 83 insertions(+), 49 deletions(-) diff --git a/ipc/sem.c b/ipc/sem.c index 19c8b980d1fe..4a92c0447ad6 100644 --- a/ipc/sem.c +++ b/ipc/sem.c @@ -252,71 +252,105 @@ static void sem_rcu_free(struct rcu_head *head) ipc_rcu_free(head); } +/* + * Wait until all currently ongoing simple ops have completed. + * Caller must own sem_perm.lock. + * New simple ops cannot start, because simple ops first check + * that sem_perm.lock is free. + */ +static void sem_wait_array(struct sem_array *sma) +{ + int i; + struct sem *sem; + + for (i = 0; i < sma->sem_nsems; i++) { + sem = sma->sem_base + i; + spin_unlock_wait(&sem->lock); + } +} + /* * If the request contains only one semaphore operation, and there are * no complex transactions pending, lock only the semaphore involved. * Otherwise, lock the entire semaphore array, since we either have * multiple semaphores in our own semops, or we need to look at * semaphores from other pending complex operations. - * - * Carefully guard against sma->complex_count changing between zero - * and non-zero while we are spinning for the lock. The value of - * sma->complex_count cannot change while we are holding the lock, - * so sem_unlock should be fine. - * - * The global lock path checks that all the local locks have been released, - * checking each local lock once. This means that the local lock paths - * cannot start their critical sections while the global lock is held. */ static inline int sem_lock(struct sem_array *sma, struct sembuf *sops, int nsops) { - int locknum; - again: - if (nsops == 1 && !sma->complex_count) { - struct sem *sem = sma->sem_base + sops->sem_num; + struct sem *sem; - /* Lock just the semaphore we are interested in. */ + if (nsops != 1) { + /* Complex operation - acquire a full lock */ + ipc_lock_object(&sma->sem_perm); + + /* And wait until all simple ops that are processed + * right now have dropped their locks. + */ + sem_wait_array(sma); + return -1; + } + + /* + * Only one semaphore affected - try to optimize locking. + * The rules are: + * - optimized locking is possible if no complex operation + * is either enqueued or processed right now. + * - The test for enqueued complex ops is simple: + * sma->complex_count != 0 + * - Testing for complex ops that are processed right now is + * a bit more difficult. Complex ops acquire the full lock + * and first wait that the running simple ops have completed. + * (see above) + * Thus: If we own a simple lock and the global lock is free + * and complex_count is now 0, then it will stay 0 and + * thus just locking sem->lock is sufficient. + */ + sem = sma->sem_base + sops->sem_num; + + if (sma->complex_count == 0) { + /* + * It appears that no complex operation is around. + * Acquire the per-semaphore lock. + */ spin_lock(&sem->lock); - /* - * If sma->complex_count was set while we were spinning, - * we may need to look at things we did not lock here. - */ - if (unlikely(sma->complex_count)) { - spin_unlock(&sem->lock); - goto lock_array; - } + /* Then check that the global lock is free */ + if (!spin_is_locked(&sma->sem_perm.lock)) { + /* spin_is_locked() is not a memory barrier */ + smp_mb(); - /* - * Another process is holding the global lock on the - * sem_array; we cannot enter our critical section, - * but have to wait for the global lock to be released. - */ - if (unlikely(spin_is_locked(&sma->sem_perm.lock))) { - spin_unlock(&sem->lock); - spin_unlock_wait(&sma->sem_perm.lock); - goto again; + /* Now repeat the test of complex_count: + * It can't change anymore until we drop sem->lock. + * Thus: if is now 0, then it will stay 0. + */ + if (sma->complex_count == 0) { + /* fast path successful! */ + return sops->sem_num; + } } - - locknum = sops->sem_num; - } else { - int i; - /* - * Lock the semaphore array, and wait for all of the - * individual semaphore locks to go away. The code - * above ensures no new single-lock holders will enter - * their critical section while the array lock is held. - */ - lock_array: - ipc_lock_object(&sma->sem_perm); - for (i = 0; i < sma->sem_nsems; i++) { - struct sem *sem = sma->sem_base + i; - spin_unlock_wait(&sem->lock); - } - locknum = -1; + spin_unlock(&sem->lock); + } + + /* slow path: acquire the full lock */ + ipc_lock_object(&sma->sem_perm); + + if (sma->complex_count == 0) { + /* False alarm: + * There is no complex operation, thus we can switch + * back to the fast path. + */ + spin_lock(&sem->lock); + ipc_unlock_object(&sma->sem_perm); + return sops->sem_num; + } else { + /* Not a false alarm, thus complete the sequence for a + * full lock. + */ + sem_wait_array(sma); + return -1; } - return locknum; } static inline void sem_unlock(struct sem_array *sma, int locknum) From 6d07b68ce16ae9535955ba2059dedba5309c3ca1 Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Mon, 30 Sep 2013 13:45:06 -0700 Subject: [PATCH 263/459] ipc/sem.c: optimize sem_lock() Operations that need access to the whole array must guarantee that there are no simple operations ongoing. Right now this is achieved by spin_unlock_wait(sem->lock) on all semaphores. If complex_count is nonzero, then this spin_unlock_wait() is not necessary, because it was already performed in the past by the thread that increased complex_count and even though sem_perm.lock was dropped inbetween, no simple operation could have started, because simple operations cannot start when complex_count is non-zero. Signed-off-by: Manfred Spraul Cc: Mike Galbraith Cc: Rik van Riel Reviewed-by: Davidlohr Bueso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- ipc/sem.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/ipc/sem.c b/ipc/sem.c index 4a92c0447ad6..e20658d76bb5 100644 --- a/ipc/sem.c +++ b/ipc/sem.c @@ -257,12 +257,20 @@ static void sem_rcu_free(struct rcu_head *head) * Caller must own sem_perm.lock. * New simple ops cannot start, because simple ops first check * that sem_perm.lock is free. + * that a) sem_perm.lock is free and b) complex_count is 0. */ static void sem_wait_array(struct sem_array *sma) { int i; struct sem *sem; + if (sma->complex_count) { + /* The thread that increased sma->complex_count waited on + * all sem->lock locks. Thus we don't need to wait again. + */ + return; + } + for (i = 0; i < sma->sem_nsems; i++) { sem = sma->sem_base + i; spin_unlock_wait(&sem->lock); From d8c633766ad88527f25d9f81a5c2f083d78a2b39 Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Mon, 30 Sep 2013 13:45:07 -0700 Subject: [PATCH 264/459] ipc/sem.c: synchronize the proc interface The proc interface is not aware of sem_lock(), it instead calls ipc_lock_object() directly. This means that simple semop() operations can run in parallel with the proc interface. Right now, this is uncritical, because the implementation doesn't do anything that requires a proper synchronization. But it is dangerous and therefore should be fixed. Signed-off-by: Manfred Spraul Cc: Davidlohr Bueso Cc: Mike Galbraith Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- ipc/sem.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/ipc/sem.c b/ipc/sem.c index e20658d76bb5..cd6a733011a2 100644 --- a/ipc/sem.c +++ b/ipc/sem.c @@ -2103,6 +2103,14 @@ static int sysvipc_sem_proc_show(struct seq_file *s, void *it) struct sem_array *sma = it; time_t sem_otime; + /* + * The proc interface isn't aware of sem_lock(), it calls + * ipc_lock_object() directly (in sysvipc_find_ipc). + * In order to stay compatible with sem_lock(), we must wait until + * all simple semop() calls have left their critical regions. + */ + sem_wait_array(sma); + sem_otime = get_semotime(sma); return seq_printf(s, From 4c1c7be95c345cf2ad537a0c48e9aeadc7304527 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Mon, 30 Sep 2013 13:45:08 -0700 Subject: [PATCH 265/459] kernel/kmod.c: check for NULL in call_usermodehelper_exec() If /proc/sys/kernel/core_pattern contains only "|", a NULL pointer dereference happens upon core dump because argv_split("") returns argv[0] == NULL. This bug was once fixed by commit 264b83c07a84 ("usermodehelper: check subprocess_info->path != NULL") but was by error reintroduced by commit 7f57cfa4e2aa ("usermodehelper: kill the sub_info->path[0] check"). This bug seems to exist since 2.6.19 (the version which core dump to pipe was added). Depending on kernel version and config, some side effect might happen immediately after this oops (e.g. kernel panic with 2.6.32-358.18.1.el6). Signed-off-by: Tetsuo Handa Acked-by: Oleg Nesterov Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/kmod.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/kmod.c b/kernel/kmod.c index fb326365b694..b086006c59e7 100644 --- a/kernel/kmod.c +++ b/kernel/kmod.c @@ -571,6 +571,10 @@ int call_usermodehelper_exec(struct subprocess_info *sub_info, int wait) DECLARE_COMPLETION_ONSTACK(done); int retval = 0; + if (!sub_info->path) { + call_usermodehelper_freeinfo(sub_info); + return -EINVAL; + } helper_lock(); if (!khelper_wq || usermodehelper_disabled) { retval = -EBUSY; From 83b2944fd2532b92db099cb3ada12df32a05b368 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Mon, 30 Sep 2013 13:45:09 -0700 Subject: [PATCH 266/459] mm/bounce.c: fix a regression where MS_SNAP_STABLE (stable pages snapshotting) was ignored The "force" parameter in __blk_queue_bounce was being ignored, which means that stable page snapshots are not always happening (on ext3). This of course leads to DIF disks reporting checksum errors, so fix this regression. The regression was introduced in commit 6bc454d15004 ("bounce: Refactor __blk_queue_bounce to not use bi_io_vec") Reported-by: Mel Gorman Signed-off-by: Darrick J. Wong Cc: Kent Overstreet Cc: [3.10+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/bounce.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/bounce.c b/mm/bounce.c index c9f0a4339a7d..5a7d58fb883b 100644 --- a/mm/bounce.c +++ b/mm/bounce.c @@ -204,6 +204,8 @@ static void __blk_queue_bounce(struct request_queue *q, struct bio **bio_orig, struct bio_vec *to, *from; unsigned i; + if (force) + goto bounce; bio_for_each_segment(from, *bio_orig, i) if (page_to_pfn(from->bv_page) > queue_bounce_pfn(q)) goto bounce; From 675217fd9950a668a33f9ee3fac3df34fd5113d0 Mon Sep 17 00:00:00 2001 From: Weiping Pan Date: Mon, 30 Sep 2013 13:45:10 -0700 Subject: [PATCH 267/459] Documentation/kernel-parameters.txt: replace kernelcore with Movable Han Pingtian found a typo in Documentation/kernel-parameters.txt about "kernelcore=", that "kernelcore" should be replaced with "Movable" here. Signed-off-by: Weiping Pan Acked-by: Mel Gorman Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/kernel-parameters.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 539a23631990..73d23fdc512b 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1357,7 +1357,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. pages. In the event, a node is too small to have both kernelcore and Movable pages, kernelcore pages will take priority and other nodes will have a larger number - of kernelcore pages. The Movable zone is used for the + of Movable pages. The Movable zone is used for the allocation of pages that may be reclaimed or moved by the page migration subsystem. This means that HugeTLB pages may not be allocated from this zone. From 7f42ec3941560f0902fe3671e36f2c20ffd3af0a Mon Sep 17 00:00:00 2001 From: Vyacheslav Dubeyko Date: Mon, 30 Sep 2013 13:45:12 -0700 Subject: [PATCH 268/459] nilfs2: fix issue with race condition of competition between segments for dirty blocks Many NILFS2 users were reported about strange file system corruption (for example): NILFS: bad btree node (blocknr=185027): level = 0, flags = 0x0, nchildren = 768 NILFS error (device sda4): nilfs_bmap_last_key: broken bmap (inode number=11540) But such error messages are consequence of file system's issue that takes place more earlier. Fortunately, Jerome Poulin and Anton Eliasson were reported about another issue not so recently. These reports describe the issue with segctor thread's crash: BUG: unable to handle kernel paging request at 0000000000004c83 IP: nilfs_end_page_io+0x12/0xd0 [nilfs2] Call Trace: nilfs_segctor_do_construct+0xf25/0x1b20 [nilfs2] nilfs_segctor_construct+0x17b/0x290 [nilfs2] nilfs_segctor_thread+0x122/0x3b0 [nilfs2] kthread+0xc0/0xd0 ret_from_fork+0x7c/0xb0 These two issues have one reason. This reason can raise third issue too. Third issue results in hanging of segctor thread with eating of 100% CPU. REPRODUCING PATH: One of the possible way or the issue reproducing was described by Jermoe me Poulin : 1. init S to get to single user mode. 2. sysrq+E to make sure only my shell is running 3. start network-manager to get my wifi connection up 4. login as root and launch "screen" 5. cd /boot/log/nilfs which is a ext3 mount point and can log when NILFS dies. 6. lscp | xz -9e > lscp.txt.xz 7. mount my snapshot using mount -o cp=3360839,ro /dev/vgUbuntu/root /mnt/nilfs 8. start a screen to dump /proc/kmsg to text file since rsyslog is killed 9. start a screen and launch strace -f -o find-cat.log -t find /mnt/nilfs -type f -exec cat {} > /dev/null \; 10. start a screen and launch strace -f -o apt-get.log -t apt-get update 11. launch the last command again as it did not crash the first time 12. apt-get crashes 13. ps aux > ps-aux-crashed.log 13. sysrq+W 14. sysrq+E wait for everything to terminate 15. sysrq+SUSB Simplified way of the issue reproducing is starting kernel compilation task and "apt-get update" in parallel. REPRODUCIBILITY: The issue is reproduced not stable [60% - 80%]. It is very important to have proper environment for the issue reproducing. The critical conditions for successful reproducing: (1) It should have big modified file by mmap() way. (2) This file should have the count of dirty blocks are greater that several segments in size (for example, two or three) from time to time during processing. (3) It should be intensive background activity of files modification in another thread. INVESTIGATION: First of all, it is possible to see that the reason of crash is not valid page address: NILFS [nilfs_segctor_complete_write]:2100 bh->b_count 0, bh->b_blocknr 13895680, bh->b_size 13897727, bh->b_page 0000000000001a82 NILFS [nilfs_segctor_complete_write]:2101 segbuf->sb_segnum 6783 Moreover, value of b_page (0x1a82) is 6786. This value looks like segment number. And b_blocknr with b_size values look like block numbers. So, buffer_head's pointer points on not proper address value. Detailed investigation of the issue is discovered such picture: [-----------------------------SEGMENT 6783-------------------------------] NILFS [nilfs_segctor_do_construct]:2310 nilfs_segctor_begin_construction NILFS [nilfs_segctor_do_construct]:2321 nilfs_segctor_collect NILFS [nilfs_segctor_do_construct]:2336 nilfs_segctor_assign NILFS [nilfs_segctor_do_construct]:2367 nilfs_segctor_update_segusage NILFS [nilfs_segctor_do_construct]:2371 nilfs_segctor_prepare_write NILFS [nilfs_segctor_do_construct]:2376 nilfs_add_checksums_on_logs NILFS [nilfs_segctor_do_construct]:2381 nilfs_segctor_write NILFS [nilfs_segbuf_submit_bio]:464 bio->bi_sector 111149024, segbuf->sb_segnum 6783 [-----------------------------SEGMENT 6784-------------------------------] NILFS [nilfs_segctor_do_construct]:2310 nilfs_segctor_begin_construction NILFS [nilfs_segctor_do_construct]:2321 nilfs_segctor_collect NILFS [nilfs_lookup_dirty_data_buffers]:782 bh->b_count 1, bh->b_page ffffea000709b000, page->index 0, i_ino 1033103, i_size 25165824 NILFS [nilfs_lookup_dirty_data_buffers]:783 bh->b_assoc_buffers.next ffff8802174a6798, bh->b_assoc_buffers.prev ffff880221cffee8 NILFS [nilfs_segctor_do_construct]:2336 nilfs_segctor_assign NILFS [nilfs_segctor_do_construct]:2367 nilfs_segctor_update_segusage NILFS [nilfs_segctor_do_construct]:2371 nilfs_segctor_prepare_write NILFS [nilfs_segctor_do_construct]:2376 nilfs_add_checksums_on_logs NILFS [nilfs_segctor_do_construct]:2381 nilfs_segctor_write NILFS [nilfs_segbuf_submit_bh]:575 bh->b_count 1, bh->b_page ffffea000709b000, page->index 0, i_ino 1033103, i_size 25165824 NILFS [nilfs_segbuf_submit_bh]:576 segbuf->sb_segnum 6784 NILFS [nilfs_segbuf_submit_bh]:577 bh->b_assoc_buffers.next ffff880218a0d5f8, bh->b_assoc_buffers.prev ffff880218bcdf50 NILFS [nilfs_segbuf_submit_bio]:464 bio->bi_sector 111150080, segbuf->sb_segnum 6784, segbuf->sb_nbio 0 [----------] ditto NILFS [nilfs_segbuf_submit_bio]:464 bio->bi_sector 111164416, segbuf->sb_segnum 6784, segbuf->sb_nbio 15 [-----------------------------SEGMENT 6785-------------------------------] NILFS [nilfs_segctor_do_construct]:2310 nilfs_segctor_begin_construction NILFS [nilfs_segctor_do_construct]:2321 nilfs_segctor_collect NILFS [nilfs_lookup_dirty_data_buffers]:782 bh->b_count 2, bh->b_page ffffea000709b000, page->index 0, i_ino 1033103, i_size 25165824 NILFS [nilfs_lookup_dirty_data_buffers]:783 bh->b_assoc_buffers.next ffff880219277e80, bh->b_assoc_buffers.prev ffff880221cffc88 NILFS [nilfs_segctor_do_construct]:2367 nilfs_segctor_update_segusage NILFS [nilfs_segctor_do_construct]:2371 nilfs_segctor_prepare_write NILFS [nilfs_segctor_do_construct]:2376 nilfs_add_checksums_on_logs NILFS [nilfs_segctor_do_construct]:2381 nilfs_segctor_write NILFS [nilfs_segbuf_submit_bh]:575 bh->b_count 2, bh->b_page ffffea000709b000, page->index 0, i_ino 1033103, i_size 25165824 NILFS [nilfs_segbuf_submit_bh]:576 segbuf->sb_segnum 6785 NILFS [nilfs_segbuf_submit_bh]:577 bh->b_assoc_buffers.next ffff880218a0d5f8, bh->b_assoc_buffers.prev ffff880222cc7ee8 NILFS [nilfs_segbuf_submit_bio]:464 bio->bi_sector 111165440, segbuf->sb_segnum 6785, segbuf->sb_nbio 0 [----------] ditto NILFS [nilfs_segbuf_submit_bio]:464 bio->bi_sector 111177728, segbuf->sb_segnum 6785, segbuf->sb_nbio 12 NILFS [nilfs_segctor_do_construct]:2399 nilfs_segctor_wait NILFS [nilfs_segbuf_wait]:676 segbuf->sb_segnum 6783 NILFS [nilfs_segbuf_wait]:676 segbuf->sb_segnum 6784 NILFS [nilfs_segbuf_wait]:676 segbuf->sb_segnum 6785 NILFS [nilfs_segctor_complete_write]:2100 bh->b_count 0, bh->b_blocknr 13895680, bh->b_size 13897727, bh->b_page 0000000000001a82 BUG: unable to handle kernel paging request at 0000000000001a82 IP: [] nilfs_end_page_io+0x12/0xd0 [nilfs2] Usually, for every segment we collect dirty files in list. Then, dirty blocks are gathered for every dirty file, prepared for write and submitted by means of nilfs_segbuf_submit_bh() call. Finally, it takes place complete write phase after calling nilfs_end_bio_write() on the block layer. Buffers/pages are marked as not dirty on final phase and processed files removed from the list of dirty files. It is possible to see that we had three prepare_write and submit_bio phases before segbuf_wait and complete_write phase. Moreover, segments compete between each other for dirty blocks because on every iteration of segments processing dirty buffer_heads are added in several lists of payload_buffers: [SEGMENT 6784]: bh->b_assoc_buffers.next ffff880218a0d5f8, bh->b_assoc_buffers.prev ffff880218bcdf50 [SEGMENT 6785]: bh->b_assoc_buffers.next ffff880218a0d5f8, bh->b_assoc_buffers.prev ffff880222cc7ee8 The next pointer is the same but prev pointer has changed. It means that buffer_head has next pointer from one list but prev pointer from another. Such modification can be made several times. And, finally, it can be resulted in various issues: (1) segctor hanging, (2) segctor crashing, (3) file system metadata corruption. FIX: This patch adds: (1) setting of BH_Async_Write flag in nilfs_segctor_prepare_write() for every proccessed dirty block; (2) checking of BH_Async_Write flag in nilfs_lookup_dirty_data_buffers() and nilfs_lookup_dirty_node_buffers(); (3) clearing of BH_Async_Write flag in nilfs_segctor_complete_write(), nilfs_abort_logs(), nilfs_forget_buffer(), nilfs_clear_dirty_page(). Reported-by: Jerome Poulin Reported-by: Anton Eliasson Cc: Paul Fertser Cc: ARAI Shun-ichi Cc: Piotr Szymaniak Cc: Juan Barry Manuel Canham Cc: Zahid Chowdhury Cc: Elmer Zhang Cc: Kenneth Langga Signed-off-by: Vyacheslav Dubeyko Acked-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/nilfs2/page.c | 2 ++ fs/nilfs2/segment.c | 11 +++++++++-- 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c index 0ba679866e50..da276640f776 100644 --- a/fs/nilfs2/page.c +++ b/fs/nilfs2/page.c @@ -94,6 +94,7 @@ void nilfs_forget_buffer(struct buffer_head *bh) clear_buffer_nilfs_volatile(bh); clear_buffer_nilfs_checked(bh); clear_buffer_nilfs_redirected(bh); + clear_buffer_async_write(bh); clear_buffer_dirty(bh); if (nilfs_page_buffers_clean(page)) __nilfs_clear_page_dirty(page); @@ -429,6 +430,7 @@ void nilfs_clear_dirty_page(struct page *page, bool silent) "discard block %llu, size %zu", (u64)bh->b_blocknr, bh->b_size); } + clear_buffer_async_write(bh); clear_buffer_dirty(bh); clear_buffer_nilfs_volatile(bh); clear_buffer_nilfs_checked(bh); diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c index bd88a7461063..9f6b486b6c01 100644 --- a/fs/nilfs2/segment.c +++ b/fs/nilfs2/segment.c @@ -665,7 +665,7 @@ static size_t nilfs_lookup_dirty_data_buffers(struct inode *inode, bh = head = page_buffers(page); do { - if (!buffer_dirty(bh)) + if (!buffer_dirty(bh) || buffer_async_write(bh)) continue; get_bh(bh); list_add_tail(&bh->b_assoc_buffers, listp); @@ -699,7 +699,8 @@ static void nilfs_lookup_dirty_node_buffers(struct inode *inode, for (i = 0; i < pagevec_count(&pvec); i++) { bh = head = page_buffers(pvec.pages[i]); do { - if (buffer_dirty(bh)) { + if (buffer_dirty(bh) && + !buffer_async_write(bh)) { get_bh(bh); list_add_tail(&bh->b_assoc_buffers, listp); @@ -1579,6 +1580,7 @@ static void nilfs_segctor_prepare_write(struct nilfs_sc_info *sci) list_for_each_entry(bh, &segbuf->sb_segsum_buffers, b_assoc_buffers) { + set_buffer_async_write(bh); if (bh->b_page != bd_page) { if (bd_page) { lock_page(bd_page); @@ -1592,6 +1594,7 @@ static void nilfs_segctor_prepare_write(struct nilfs_sc_info *sci) list_for_each_entry(bh, &segbuf->sb_payload_buffers, b_assoc_buffers) { + set_buffer_async_write(bh); if (bh == segbuf->sb_super_root) { if (bh->b_page != bd_page) { lock_page(bd_page); @@ -1677,6 +1680,7 @@ static void nilfs_abort_logs(struct list_head *logs, int err) list_for_each_entry(segbuf, logs, sb_list) { list_for_each_entry(bh, &segbuf->sb_segsum_buffers, b_assoc_buffers) { + clear_buffer_async_write(bh); if (bh->b_page != bd_page) { if (bd_page) end_page_writeback(bd_page); @@ -1686,6 +1690,7 @@ static void nilfs_abort_logs(struct list_head *logs, int err) list_for_each_entry(bh, &segbuf->sb_payload_buffers, b_assoc_buffers) { + clear_buffer_async_write(bh); if (bh == segbuf->sb_super_root) { if (bh->b_page != bd_page) { end_page_writeback(bd_page); @@ -1755,6 +1760,7 @@ static void nilfs_segctor_complete_write(struct nilfs_sc_info *sci) b_assoc_buffers) { set_buffer_uptodate(bh); clear_buffer_dirty(bh); + clear_buffer_async_write(bh); if (bh->b_page != bd_page) { if (bd_page) end_page_writeback(bd_page); @@ -1776,6 +1782,7 @@ static void nilfs_segctor_complete_write(struct nilfs_sc_info *sci) b_assoc_buffers) { set_buffer_uptodate(bh); clear_buffer_dirty(bh); + clear_buffer_async_write(bh); clear_buffer_delay(bh); clear_buffer_nilfs_volatile(bh); clear_buffer_nilfs_redirected(bh); From 2a156a6b52f45355d999b58b745eef93021cc81a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 30 Sep 2013 13:45:13 -0700 Subject: [PATCH 269/459] include/asm-generic/vtime.h: avoid zero-length file patch(1) can't handle zero-length files - it appears to simply not create the file, so my powerpc build fails. Put something in here to make life easier. Cc: Hugh Dickins Cc: Frederic Weisbecker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/vtime.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-generic/vtime.h b/include/asm-generic/vtime.h index e69de29bb2d1..b1a49677fe25 100644 --- a/include/asm-generic/vtime.h +++ b/include/asm-generic/vtime.h @@ -0,0 +1 @@ +/* no content, but patch(1) dislikes empty files */ From 0772dac1dc28ab5a67374303e58c0fe5bff15720 Mon Sep 17 00:00:00 2001 From: Felipe Pena Date: Mon, 30 Sep 2013 13:45:14 -0700 Subject: [PATCH 270/459] arch/parisc/mm/fault.c: fix uninitialized variable usage The FAULT_FLAG_WRITE flag has been set based on uninitialized variable. Fixes a regression added by commit 759496ba6407 ("arch: mm: pass userspace fault flag to generic fault handler") Signed-off-by: Felipe Pena Cc: Johannes Weiner Cc: Michal Hocko Cc: "James E.J. Bottomley" Cc: Helge Deller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/parisc/mm/fault.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index d10d27a720c0..00c0ed333a3d 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -182,6 +182,9 @@ void do_page_fault(struct pt_regs *regs, unsigned long code, if (user_mode(regs)) flags |= FAULT_FLAG_USER; + + acc_type = parisc_acctyp(code, regs->iir); + if (acc_type & VM_WRITE) flags |= FAULT_FLAG_WRITE; retry: @@ -196,8 +199,6 @@ retry: good_area: - acc_type = parisc_acctyp(code,regs->iir); - if ((vma->vm_flags & acc_type) != acc_type) goto bad_area; From 117aad1e9e4d97448d1df3f84b08bd65811e6d6a Mon Sep 17 00:00:00 2001 From: Rafael Aquini Date: Mon, 30 Sep 2013 13:45:16 -0700 Subject: [PATCH 271/459] mm: avoid reinserting isolated balloon pages into LRU lists Isolated balloon pages can wrongly end up in LRU lists when migrate_pages() finishes its round without draining all the isolated page list. The same issue can happen when reclaim_clean_pages_from_list() tries to reclaim pages from an isolated page list, before migration, in the CMA path. Such balloon page leak opens a race window against LRU lists shrinkers that leads us to the following kernel panic: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [] shrink_page_list+0x24e/0x897 PGD 3cda2067 PUD 3d713067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 340 Comm: kswapd0 Not tainted 3.12.0-rc1-22626-g4367597 #87 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 RIP: shrink_page_list+0x24e/0x897 RSP: 0000:ffff88003da499b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88003e82bd60 RCX: 00000000000657d5 RDX: 0000000000000000 RSI: 000000000000031f RDI: ffff88003e82bd40 RBP: ffff88003da49ab0 R08: 0000000000000001 R09: 0000000081121a45 R10: ffffffff81121a45 R11: ffff88003c4a9a28 R12: ffff88003e82bd40 R13: ffff88003da0e800 R14: 0000000000000001 R15: ffff88003da49d58 FS: 0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000067d9000 CR3: 000000003ace5000 CR4: 00000000000407b0 Call Trace: shrink_inactive_list+0x240/0x3de shrink_lruvec+0x3e0/0x566 __shrink_zone+0x94/0x178 shrink_zone+0x3a/0x82 balance_pgdat+0x32a/0x4c2 kswapd+0x2f0/0x372 kthread+0xa2/0xaa ret_from_fork+0x7c/0xb0 Code: 80 7d 8f 01 48 83 95 68 ff ff ff 00 4c 89 e7 e8 5a 7b 00 00 48 85 c0 49 89 c5 75 08 80 7d 8f 00 74 3e eb 31 48 8b 80 18 01 00 00 <48> 8b 74 0d 48 8b 78 30 be 02 00 00 00 ff d2 eb RIP [] shrink_page_list+0x24e/0x897 RSP CR2: 0000000000000028 ---[ end trace 703d2451af6ffbfd ]--- Kernel panic - not syncing: Fatal exception This patch fixes the issue, by assuring the proper tests are made at putback_movable_pages() & reclaim_clean_pages_from_list() to avoid isolated balloon pages being wrongly reinserted in LRU lists. [akpm@linux-foundation.org: clarify awkward comment text] Signed-off-by: Rafael Aquini Reported-by: Luiz Capitulino Tested-by: Luiz Capitulino Cc: Mel Gorman Cc: Rik van Riel Cc: Hugh Dickins Cc: Johannes Weiner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/balloon_compaction.h | 25 +++++++++++++++++++++++++ mm/migrate.c | 2 +- mm/vmscan.c | 4 +++- 3 files changed, 29 insertions(+), 2 deletions(-) diff --git a/include/linux/balloon_compaction.h b/include/linux/balloon_compaction.h index f7f1d7169b11..089743ade734 100644 --- a/include/linux/balloon_compaction.h +++ b/include/linux/balloon_compaction.h @@ -158,6 +158,26 @@ static inline bool balloon_page_movable(struct page *page) return false; } +/* + * isolated_balloon_page - identify an isolated balloon page on private + * compaction/migration page lists. + * + * After a compaction thread isolates a balloon page for migration, it raises + * the page refcount to prevent concurrent compaction threads from re-isolating + * the same page. For that reason putback_movable_pages(), or other routines + * that need to identify isolated balloon pages on private pagelists, cannot + * rely on balloon_page_movable() to accomplish the task. + */ +static inline bool isolated_balloon_page(struct page *page) +{ + /* Already isolated balloon pages, by default, have a raised refcount */ + if (page_flags_cleared(page) && !page_mapped(page) && + page_count(page) >= 2) + return __is_movable_balloon_page(page); + + return false; +} + /* * balloon_page_insert - insert a page into the balloon's page list and make * the page->mapping assignment accordingly. @@ -243,6 +263,11 @@ static inline bool balloon_page_movable(struct page *page) return false; } +static inline bool isolated_balloon_page(struct page *page) +{ + return false; +} + static inline bool balloon_page_isolate(struct page *page) { return false; diff --git a/mm/migrate.c b/mm/migrate.c index 9c8d5f59d30b..a26bccd44ccb 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -107,7 +107,7 @@ void putback_movable_pages(struct list_head *l) list_del(&page->lru); dec_zone_page_state(page, NR_ISOLATED_ANON + page_is_file_cache(page)); - if (unlikely(balloon_page_movable(page))) + if (unlikely(isolated_balloon_page(page))) balloon_page_putback(page); else putback_lru_page(page); diff --git a/mm/vmscan.c b/mm/vmscan.c index beb35778c69f..53f2f82f83ae 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -48,6 +48,7 @@ #include #include +#include #include "internal.h" @@ -1113,7 +1114,8 @@ unsigned long reclaim_clean_pages_from_list(struct zone *zone, LIST_HEAD(clean_pages); list_for_each_entry_safe(page, next, page_list, lru) { - if (page_is_file_cache(page) && !PageDirty(page)) { + if (page_is_file_cache(page) && !PageDirty(page) && + !isolated_balloon_page(page)) { ClearPageActive(page); list_move(&page->lru, &clean_pages); } From eadb41ae82f802105c0601aa8a0a0e7595826497 Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Mon, 30 Sep 2013 13:45:18 -0700 Subject: [PATCH 272/459] mm/mlock.c: prevent walking off the end of a pagetable in no-pmd configuration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The function __munlock_pagevec_fill() introduced in commit 7a8010cd3627 ("mm: munlock: manual pte walk in fast path instead of follow_page_mask()") uses pmd_addr_end() for restricting its operation within current page table. This is insufficient on architectures/configurations where pmd is folded and pmd_addr_end() just returns the end of the full range to be walked. In this case, it allows pte++ to walk off the end of a page table resulting in unpredictable behaviour. This patch fixes the function by using pgd_addr_end() and pud_addr_end() before pmd_addr_end(), which will yield correct page table boundary on all configurations. This is similar to what existing page walkers do when walking each level of the page table. Additionaly, the patch clarifies a comment for get_locked_pte() call in the function. Signed-off-by: Vlastimil Babka Reported-by: Fengguang Wu Reviewed-by: Bob Liu Cc: Jörn Engel Cc: Mel Gorman Cc: Michel Lespinasse Cc: Hugh Dickins Cc: Rik van Riel Cc: Johannes Weiner Cc: Michal Hocko Cc: Vlastimil Babka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mlock.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/mm/mlock.c b/mm/mlock.c index 67ba6da7d0e3..d480cd6fc475 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -379,10 +379,14 @@ static unsigned long __munlock_pagevec_fill(struct pagevec *pvec, /* * Initialize pte walk starting at the already pinned page where we - * are sure that there is a pte. + * are sure that there is a pte, as it was pinned under the same + * mmap_sem write op. */ pte = get_locked_pte(vma->vm_mm, start, &ptl); - end = min(end, pmd_addr_end(start, end)); + /* Make sure we do not cross the page table boundary */ + end = pgd_addr_end(start, end); + end = pud_addr_end(start, end); + end = pmd_addr_end(start, end); /* The page next to the pinned page is the first we will try to get */ start += PAGE_SIZE; From 080506ad0aa9c9fbc7879cdd290d55624da08c60 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 30 Sep 2013 13:45:19 -0700 Subject: [PATCH 273/459] block: change config option name for cmdline partition parsing Recently commit bab55417b10c ("block: support embedded device command line partition") introduced CONFIG_CMDLINE_PARSER. However, that name is too generic and sounds like it enables/disables generic kernel boot arg processing, when it really is block specific. Before this option becomes a part of a full/final release, add the BLK_ prefix to it so that it is clear in absence of any other context that it is block specific. In addition, fix up the following less critical items: - help text was not really at all helpful. - index file for Documentation was not updated - add the new arg to Documentation/kernel-parameters.txt - clarify wording in source comments Signed-off-by: Paul Gortmaker Cc: Jens Axboe Cc: Cai Zhiyong Cc: Wei Yongjun Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/block/00-INDEX | 2 ++ Documentation/block/cmdline-partition.txt | 8 ++++---- Documentation/kernel-parameters.txt | 4 ++++ block/Kconfig | 9 +++++++-- block/Makefile | 2 +- block/partitions/Kconfig | 4 ++-- block/partitions/cmdline.c | 8 ++++---- 7 files changed, 24 insertions(+), 13 deletions(-) diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX index d18ecd827c40..929d9904f74b 100644 --- a/Documentation/block/00-INDEX +++ b/Documentation/block/00-INDEX @@ -6,6 +6,8 @@ capability.txt - Generic Block Device Capability (/sys/block//capability) cfq-iosched.txt - CFQ IO scheduler tunables +cmdline-partition.txt + - how to specify block device partitions on kernel command line data-integrity.txt - Block data integrity deadline-iosched.txt diff --git a/Documentation/block/cmdline-partition.txt b/Documentation/block/cmdline-partition.txt index 2bbf4cc40c3f..525b9f6d7fb4 100644 --- a/Documentation/block/cmdline-partition.txt +++ b/Documentation/block/cmdline-partition.txt @@ -1,9 +1,9 @@ -Embedded device command line partition +Embedded device command line partition parsing ===================================================================== -Read block device partition table from command line. -The partition used for fixed block device (eMMC) embedded device. -It is no MBR, save storage space. Bootloader can be easily accessed +Support for reading the block device partition table from the command line. +It is typically used for fixed block (eMMC) embedded devices. +It has no MBR, so saves storage space. Bootloader can be easily accessed by absolute address of data on the block device. Users can easily change the partition. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 73d23fdc512b..fcbb736d55fe 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -480,6 +480,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Format: ,, See header of drivers/net/hamradio/baycom_ser_hdx.c. + blkdevparts= Manual partition parsing of block device(s) for + embedded devices based on command line input. + See Documentation/block/cmdline-partition.txt + boot_delay= Milliseconds to delay each printk during boot. Values larger than 10 seconds (10000) are changed to no delay (0). diff --git a/block/Kconfig b/block/Kconfig index 7f38e40fee08..2429515c05c2 100644 --- a/block/Kconfig +++ b/block/Kconfig @@ -99,11 +99,16 @@ config BLK_DEV_THROTTLING See Documentation/cgroups/blkio-controller.txt for more information. -config CMDLINE_PARSER +config BLK_CMDLINE_PARSER bool "Block device command line partition parser" default n ---help--- - Parsing command line, get the partitions information. + Enabling this option allows you to specify the partition layout from + the kernel boot args. This is typically of use for embedded devices + which don't otherwise have any standardized method for listing the + partitions on a block device. + + See Documentation/block/cmdline-partition.txt for more information. menu "Partition Types" diff --git a/block/Makefile b/block/Makefile index 4fa4be544ece..671a83d063a5 100644 --- a/block/Makefile +++ b/block/Makefile @@ -18,4 +18,4 @@ obj-$(CONFIG_IOSCHED_CFQ) += cfq-iosched.o obj-$(CONFIG_BLOCK_COMPAT) += compat_ioctl.o obj-$(CONFIG_BLK_DEV_INTEGRITY) += blk-integrity.o -obj-$(CONFIG_CMDLINE_PARSER) += cmdline-parser.o +obj-$(CONFIG_BLK_CMDLINE_PARSER) += cmdline-parser.o diff --git a/block/partitions/Kconfig b/block/partitions/Kconfig index 87a32086535d..9b29a996c311 100644 --- a/block/partitions/Kconfig +++ b/block/partitions/Kconfig @@ -263,7 +263,7 @@ config SYSV68_PARTITION config CMDLINE_PARTITION bool "Command line partition support" if PARTITION_ADVANCED - select CMDLINE_PARSER + select BLK_CMDLINE_PARSER help - Say Y here if you would read the partitions table from bootargs. + Say Y here if you want to read the partition table from bootargs. The format for the command line is just like mtdparts. diff --git a/block/partitions/cmdline.c b/block/partitions/cmdline.c index 56cf4ffad51e..5141b563adf1 100644 --- a/block/partitions/cmdline.c +++ b/block/partitions/cmdline.c @@ -2,15 +2,15 @@ * Copyright (C) 2013 HUAWEI * Author: Cai Zhiyong * - * Read block device partition table from command line. - * The partition used for fixed block device (eMMC) embedded device. - * It is no MBR, save storage space. Bootloader can be easily accessed + * Read block device partition table from the command line. + * Typically used for fixed block (eMMC) embedded devices. + * It has no MBR, so saves storage space. Bootloader can be easily accessed * by absolute address of data on the block device. * Users can easily change the partition. * * The format for the command line is just like mtdparts. * - * Verbose config please reference "Documentation/block/cmdline-partition.txt" + * For further information, see "Documentation/block/cmdline-partition.txt" * */ From 20cb6cab52a21b46e3c0dc7bd23f004f810fb421 Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Mon, 30 Sep 2013 13:45:21 -0700 Subject: [PATCH 274/459] mm/hwpoison: fix traversal of hugetlbfs pages to avoid printk flood madvise_hwpoison won't check if the page is small page or huge page and traverses in small page granularity against the range unconditionally, which result in a printk flood "MCE xxx: already hardware poisoned" if the page is a huge page. This patch fixes it by using compound_order(compound_head(page)) for huge page iterator. Testcase: #define _GNU_SOURCE #include #include #include #include #include #include #include #define PAGES_TO_TEST 3 #define PAGE_SIZE 4096 * 512 int main(void) { char *mem; int i; mem = mmap(NULL, PAGES_TO_TEST * PAGE_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB, 0, 0); if (madvise(mem, PAGES_TO_TEST * PAGE_SIZE, MADV_HWPOISON) == -1) return -1; munmap(mem, PAGES_TO_TEST * PAGE_SIZE); return 0; } Signed-off-by: Wanpeng Li Reviewed-by: Naoya Horiguchi Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/madvise.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/mm/madvise.c b/mm/madvise.c index 6975bc812542..539eeb96b323 100644 --- a/mm/madvise.c +++ b/mm/madvise.c @@ -343,10 +343,11 @@ static long madvise_remove(struct vm_area_struct *vma, */ static int madvise_hwpoison(int bhv, unsigned long start, unsigned long end) { + struct page *p; if (!capable(CAP_SYS_ADMIN)) return -EPERM; - for (; start < end; start += PAGE_SIZE) { - struct page *p; + for (; start < end; start += PAGE_SIZE << + compound_order(compound_head(p))) { int ret; ret = get_user_pages_fast(start, 1, 0, &p); From e76d30e20be5fca46c185a1470b045b89f95edcb Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Mon, 30 Sep 2013 13:45:22 -0700 Subject: [PATCH 275/459] mm/hwpoison: fix test for a transparent huge page PageTransHuge() can't guarantee the page is a transparent huge page since it returns true for both transparent huge and hugetlbfs pages. This patch fixes it by checking the page is also !hugetlbfs page. Before patch: [ 121.571128] Injecting memory failure at pfn 23a200 [ 121.571141] MCE 0x23a200: huge page recovery: Delayed [ 140.355100] MCE: Memory failure is now running on 0x23a200 After patch: [ 94.290793] Injecting memory failure at pfn 23a000 [ 94.290800] MCE 0x23a000: huge page recovery: Delayed [ 105.722303] MCE: Software-unpoisoned page 0x23a000 Signed-off-by: Wanpeng Li Reviewed-by: Naoya Horiguchi Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 947ed5413279..3faba33c67cc 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1349,7 +1349,7 @@ int unpoison_memory(unsigned long pfn) * worked by memory_failure() and the page lock is not held yet. * In such case, we yield to memory_failure() and make unpoison fail. */ - if (PageTransHuge(page)) { + if (!PageHuge(page) && PageTransHuge(page)) { pr_info("MCE: Memory failure is now running on %#lx\n", pfn); return 0; } From 2d421acd1568cf2d83739a1afec8e18edb9e3d16 Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Mon, 30 Sep 2013 13:45:23 -0700 Subject: [PATCH 276/459] mm/hwpoison: fix false report on 2nd attempt at page recovery If the page is poisoned by software injection w/ MF_COUNT_INCREASED flag, there is a false report during the 2nd attempt at page recovery which is not truthful. This patch fixes it by reporting the first attempt to try free buddy page recovery if MF_COUNT_INCREASED is set. Before patch: [ 346.332041] Injecting memory failure at pfn 200010 [ 346.332189] MCE 0x200010: free buddy, 2nd try page recovery: Delayed After patch: [ 297.742600] Injecting memory failure at pfn 200010 [ 297.742941] MCE 0x200010: free buddy page recovery: Delayed Reviewed-by: Naoya Horiguchi Acked-by: Andi Kleen Signed-off-by: Wanpeng Li Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 3faba33c67cc..bf3351b5115e 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1114,8 +1114,10 @@ int memory_failure(unsigned long pfn, int trapno, int flags) * shake_page could have turned it free. */ if (is_free_buddy_page(p)) { - action_result(pfn, "free buddy, 2nd try", - DELAYED); + if (flags & MF_COUNT_INCREASED) + action_result(pfn, "free buddy", DELAYED); + else + action_result(pfn, "free buddy, 2nd try", DELAYED); return 0; } action_result(pfn, "non LRU", IGNORED); From fb31ba30fb10fe0ee11739f51669d581b4a1412c Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Mon, 30 Sep 2013 13:45:24 -0700 Subject: [PATCH 277/459] mm/hwpoison: fix the lack of one reference count against poisoned page The lack of one reference count against poisoned page for hwpoison_inject w/o hwpoison_filter enabled result in hwpoison detect -1 users still referenced the page, however, the number should be 0 except the poison handler held one after successfully unmap. This patch fix it by hold one referenced count against poisoned page for hwpoison_inject w/ and w/o hwpoison_filter enabled. Before patch: [ 71.902112] Injecting memory failure at pfn 224706 [ 71.902137] MCE 0x224706: dirty LRU page recovery: Failed [ 71.902138] MCE 0x224706: dirty LRU page still referenced by -1 users After patch: [ 94.710860] Injecting memory failure at pfn 215b68 [ 94.710885] MCE 0x215b68: dirty LRU page recovery: Recovered Reviewed-by: Naoya Horiguchi Acked-by: Andi Kleen Signed-off-by: Wanpeng Li Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hwpoison-inject.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/mm/hwpoison-inject.c b/mm/hwpoison-inject.c index afc2daa91c60..4c84678371eb 100644 --- a/mm/hwpoison-inject.c +++ b/mm/hwpoison-inject.c @@ -20,8 +20,6 @@ static int hwpoison_inject(void *data, u64 val) if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (!hwpoison_filter_enable) - goto inject; if (!pfn_valid(pfn)) return -ENXIO; @@ -33,6 +31,9 @@ static int hwpoison_inject(void *data, u64 val) if (!get_page_unless_zero(hpage)) return 0; + if (!hwpoison_filter_enable) + goto inject; + if (!PageLRU(p) && !PageHuge(p)) shake_page(p, 0); /* From 0e8c665699e953fa58dc1b0b0d09e5dce7343cc7 Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Mon, 30 Sep 2013 13:45:25 -0700 Subject: [PATCH 278/459] ipc/sem.c: update sem_otime for all operations In commit 0a2b9d4c7967 ("ipc/sem.c: move wake_up_process out of the spinlock section"), the update of semaphore's sem_otime(last semop time) was moved to one central position (do_smart_update). But since do_smart_update() is only called for operations that modify the array, this means that wait-for-zero semops do not update sem_otime anymore. The fix is simple: Non-alter operations must update sem_otime. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Manfred Spraul Reported-by: Jia He Tested-by: Jia He Cc: Davidlohr Bueso Cc: Mike Galbraith Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- ipc/sem.c | 42 +++++++++++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 13 deletions(-) diff --git a/ipc/sem.c b/ipc/sem.c index cd6a733011a2..8c4f59b0204a 100644 --- a/ipc/sem.c +++ b/ipc/sem.c @@ -917,6 +917,24 @@ again: return semop_completed; } +/** + * set_semotime(sma, sops) - set sem_otime + * @sma: semaphore array + * @sops: operations that modified the array, may be NULL + * + * sem_otime is replicated to avoid cache line trashing. + * This function sets one instance to the current time. + */ +static void set_semotime(struct sem_array *sma, struct sembuf *sops) +{ + if (sops == NULL) { + sma->sem_base[0].sem_otime = get_seconds(); + } else { + sma->sem_base[sops[0].sem_num].sem_otime = + get_seconds(); + } +} + /** * do_smart_update(sma, sops, nsops, otime, pt) - optimized update_queue * @sma: semaphore array @@ -967,17 +985,10 @@ static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsop } } } - if (otime) { - if (sops == NULL) { - sma->sem_base[0].sem_otime = get_seconds(); - } else { - sma->sem_base[sops[0].sem_num].sem_otime = - get_seconds(); - } - } + if (otime) + set_semotime(sma, sops); } - /* The following counts are associated to each semaphore: * semncnt number of tasks waiting on semval being nonzero * semzcnt number of tasks waiting on semval being zero @@ -1839,12 +1850,17 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops, error = perform_atomic_semop(sma, sops, nsops, un, task_tgid_vnr(current)); - if (error <= 0) { - if (alter && error == 0) + if (error == 0) { + /* If the operation was successful, then do + * the required updates. + */ + if (alter) do_smart_update(sma, sops, nsops, 1, &tasks); - - goto out_unlock_free; + else + set_semotime(sma, sops); } + if (error <= 0) + goto out_unlock_free; /* We need to sleep on this operation, so we put the current * task into the pending queue and go to sleep. From 4271b05a227dc6175b66c3d9941aeab09048aeb2 Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Mon, 30 Sep 2013 13:45:26 -0700 Subject: [PATCH 279/459] ipc,msg: prevent race with rmid in msgsnd,msgrcv This fixes a race in both msgrcv() and msgsnd() between finding the msg and actually dealing with the queue, as another thread can delete shmid underneath us if we are preempted before acquiring the kern_ipc_perm.lock. Manfred illustrates this nicely: Assume a preemptible kernel that is preempted just after msq = msq_obtain_object_check(ns, msqid) in do_msgrcv(). The only lock that is held is rcu_read_lock(). Now the other thread processes IPC_RMID. When the first task is resumed, then it will happily wait for messages on a deleted queue. Fix this by checking for if the queue has been deleted after taking the lock. Signed-off-by: Davidlohr Bueso Reported-by: Manfred Spraul Cc: Rik van Riel Cc: Mike Galbraith Cc: [3.11] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- ipc/msg.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/ipc/msg.c b/ipc/msg.c index 9e4310c546ae..558aa91186b6 100644 --- a/ipc/msg.c +++ b/ipc/msg.c @@ -695,6 +695,12 @@ long do_msgsnd(int msqid, long mtype, void __user *mtext, if (ipcperms(ns, &msq->q_perm, S_IWUGO)) goto out_unlock0; + /* raced with RMID? */ + if (msq->q_perm.deleted) { + err = -EIDRM; + goto out_unlock0; + } + err = security_msg_queue_msgsnd(msq, msg, msgflg); if (err) goto out_unlock0; @@ -901,6 +907,13 @@ long do_msgrcv(int msqid, void __user *buf, size_t bufsz, long msgtyp, int msgfl goto out_unlock1; ipc_lock_object(&msq->q_perm); + + /* raced with RMID? */ + if (msq->q_perm.deleted) { + msg = ERR_PTR(-EIDRM); + goto out_unlock0; + } + msg = find_msg(msq, &msgtyp, mode); if (!IS_ERR(msg)) { /* From 314a8ad0f18ac37887896b288939acd8cb17e208 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 30 Sep 2013 13:45:27 -0700 Subject: [PATCH 280/459] pidns: fix free_pid() to handle the first fork failure "case 0" in free_pid() assumes that disable_pid_allocation() should clear PIDNS_HASH_ADDING before the last pid goes away. However this doesn't happen if the first fork() fails to create the child reaper which should call disable_pid_allocation(). Signed-off-by: Oleg Nesterov Reviewed-by: "Eric W. Biederman" Cc: "Serge E. Hallyn" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/pid.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/kernel/pid.c b/kernel/pid.c index ebe5e80b10f8..9b9a26698144 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -273,6 +273,11 @@ void free_pid(struct pid *pid) */ wake_up_process(ns->child_reaper); break; + case PIDNS_HASH_ADDING: + /* Handle a fork failure of the first process */ + WARN_ON(ns->child_reaper); + ns->nr_hashed = 0; + /* fall through */ case 0: schedule_work(&ns->proc_work); break; From bf0ea6380724beb64f27a722dfc4b0edabff816e Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 30 Sep 2013 23:28:20 +0200 Subject: [PATCH 281/459] dm9601: fix IFF_ALLMULTI handling Pass-all-multicast is controlled by bit 3 in RX control, not bit 2 (pass undersized frames). Reported-by: Joseph Chang Signed-off-by: Peter Korsgaard Signed-off-by: David S. Miller --- drivers/net/usb/dm9601.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 2dbb9460349d..c6867f926cff 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -303,7 +303,7 @@ static void dm9601_set_multicast(struct net_device *net) rx_ctl |= 0x02; } else if (net->flags & IFF_ALLMULTI || netdev_mc_count(net) > DM_MAX_MCAST) { - rx_ctl |= 0x04; + rx_ctl |= 0x08; } else if (!netdev_mc_empty(net)) { struct netdev_hw_addr *ha; From b643f85814f69306b9a6e0df34a1c8acb97d3bbd Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Tue, 1 Oct 2013 00:19:16 +0200 Subject: [PATCH 282/459] ARM: mvebu: add missing DT Mbus ranges and relocate PCIe DT nodes for RN102 When 5e12a613 and 0cd3754a were introduced, Netgear ReadyNAS 102 .dts file was queued for inclusion and missed the update to have Mbus (and then BootROM) ranges properties declared. It also missed the relocation of Armada 370/XP PCIe DT nodes introduced by 14fd8ed0 after de1af8d4. This patch fixes that which makes 3.12-rc3 bootable on the NAS. Signed-off-by: Arnaud Ebalard Signed-off-by: Jason Cooper --- .../arm/boot/dts/armada-370-netgear-rn102.dts | 35 ++++++++++--------- 1 file changed, 19 insertions(+), 16 deletions(-) diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 40e73be31720..8ac2ac1f69cc 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -27,6 +27,25 @@ }; soc { + ranges = ; + + pcie-controller { + status = "okay"; + + /* Connected to Marvell SATA controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to FL1009 USB 3.0 controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + internal-regs { serial@12000 { clock-frequency = <200000000>; @@ -94,22 +113,6 @@ pwm_polarity = <0>; }; }; - - pcie-controller { - status = "okay"; - - /* Connected to Marvell SATA controller */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Connected to FL1009 USB 3.0 controller */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; }; }; From eb2addd4044b4b2ce77693bde5bc810536dd96ee Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Mal=C3=BD?= Date: Sat, 28 Sep 2013 19:50:27 +0200 Subject: [PATCH 283/459] USB: serial: option: Ignore card reader interface on Huawei E1750 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Hi, my Huawei 3G modem has an embedded Smart Card reader which causes trouble when the modem is being detected (a bunch of " (ttyUSBx): open blocked by driver for more than 7 seconds!" in messages.log). This trivial patch corrects the problem for me. The modem identifies itself as "12d1:1406 Huawei Technologies Co., Ltd. E1750" in lsusb although the description on the body says "Model E173u-1" Signed-off-by: Michal Malý Cc: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 1cf6f125f5f0..80a7104d5ddb 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -81,6 +81,7 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_VENDOR_ID 0x12D1 #define HUAWEI_PRODUCT_E173 0x140C +#define HUAWEI_PRODUCT_E1750 0x1406 #define HUAWEI_PRODUCT_K4505 0x1464 #define HUAWEI_PRODUCT_K3765 0x1465 #define HUAWEI_PRODUCT_K4605 0x14C6 @@ -567,6 +568,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1750, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t) &net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1441, USB_CLASS_COMM, 0x02, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1442, USB_CLASS_COMM, 0x02, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff), From f8747d4a466ab2cafe56112c51b3379f9fdb7a12 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 27 Sep 2013 13:27:05 -0400 Subject: [PATCH 284/459] tty: Fix pty master read() after slave closes Commit f95499c3030fe1bfad57745f2db1959c5b43dca8, n_tty: Don't wait for buffer work in read() loop creates a race window which can cause a pty master read() to miss the last pty slave write(s) and return -EIO instead, thus signalling the pty slave is closed. This can happen when the pty slave is written and immediately closed but before the tty buffer i/o loop receives the new input; the pty master read() is scheduled, sees its read buffer is empty and the pty slave has been closed, and exits. Because tty_flush_to_ldisc() has significant performance impact for parallel i/o, rather than revert the commit, special case this condition (ie., when the read buffer is empty and the 'other' pty has been closed) and, only then, wait for buffer work to complete before re-testing if the read buffer is still empty. As before, subsequent pty master reads return any available data until no more data is available, and then returns -EIO to indicate the pty slave has closed. Reported-by: Mikael Pettersson Signed-off-by: Peter Hurley Tested-by: Mikael Pettersson Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 46 +++++++++++++++++++++++++-------------------- 1 file changed, 26 insertions(+), 20 deletions(-) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 01bf5eb4f238..7a744b69c3d1 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -2183,28 +2183,34 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, if (!input_available_p(tty, 0)) { if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { - retval = -EIO; - break; - } - if (tty_hung_up_p(file)) - break; - if (!timeout) - break; - if (file->f_flags & O_NONBLOCK) { - retval = -EAGAIN; - break; - } - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - n_tty_set_room(tty); - up_read(&tty->termios_rwsem); + up_read(&tty->termios_rwsem); + tty_flush_to_ldisc(tty); + down_read(&tty->termios_rwsem); + if (!input_available_p(tty, 0)) { + retval = -EIO; + break; + } + } else { + if (tty_hung_up_p(file)) + break; + if (!timeout) + break; + if (file->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + break; + } + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + n_tty_set_room(tty); + up_read(&tty->termios_rwsem); - timeout = schedule_timeout(timeout); + timeout = schedule_timeout(timeout); - down_read(&tty->termios_rwsem); - continue; + down_read(&tty->termios_rwsem); + continue; + } } __set_current_state(TASK_RUNNING); From c9eeec26e32e087359160406f96e0949b3cc6f10 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 27 Sep 2013 03:28:54 -0700 Subject: [PATCH 285/459] tcp: TSQ can use a dynamic limit When TCP Small Queues was added, we used a sysctl to limit amount of packets queues on Qdisc/device queues for a given TCP flow. Problem is this limit is either too big for low rates, or too small for high rates. Now TCP stack has rate estimation in sk->sk_pacing_rate, and TSO auto sizing, it can better control number of packets in Qdisc/device queues. New limit is two packets or at least 1 to 2 ms worth of packets. Low rates flows benefit from this patch by having even smaller number of packets in queues, allowing for faster recovery, better RTT estimations. High rates flows benefit from this patch by allowing more than 2 packets in flight as we had reports this was a limiting factor to reach line rate. [ In particular if TX completion is delayed because of coalescing parameters ] Example for a single flow on 10Gbp link controlled by FQ/pacing 14 packets in flight instead of 2 $ tc -s -d qd qdisc fq 8001: dev eth0 root refcnt 32 limit 10000p flow_limit 100p buckets 1024 quantum 3028 initial_quantum 15140 Sent 1168459366606 bytes 771822841 pkt (dropped 0, overlimits 0 requeues 6822476) rate 9346Mbit 771713pps backlog 953820b 14p requeues 6822476 2047 flow, 2046 inactive, 1 throttled, delay 15673 ns 2372 gc, 0 highprio, 0 retrans, 9739249 throttled, 0 flows_plimit Note that sk_pacing_rate is currently set to twice the actual rate, but this might be refined in the future when a flow is in congestion avoidance. Additional change : skb->destructor should be set to tcp_wfree(). A future patch (for linux 3.13+) might remove tcp_limit_output_bytes Signed-off-by: Eric Dumazet Cc: Wei Liu Cc: Cong Wang Cc: Yuchung Cheng Cc: Neal Cardwell Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 7c83cb8bf137..e6bb8256e59f 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -895,8 +895,7 @@ static int tcp_transmit_skb(struct sock *sk, struct sk_buff *skb, int clone_it, skb_orphan(skb); skb->sk = sk; - skb->destructor = (sysctl_tcp_limit_output_bytes > 0) ? - tcp_wfree : sock_wfree; + skb->destructor = tcp_wfree; atomic_add(skb->truesize, &sk->sk_wmem_alloc); /* Build TCP header and checksum it. */ @@ -1840,7 +1839,6 @@ static bool tcp_write_xmit(struct sock *sk, unsigned int mss_now, int nonagle, while ((skb = tcp_send_head(sk))) { unsigned int limit; - tso_segs = tcp_init_tso_segs(sk, skb, mss_now); BUG_ON(!tso_segs); @@ -1869,13 +1867,20 @@ static bool tcp_write_xmit(struct sock *sk, unsigned int mss_now, int nonagle, break; } - /* TSQ : sk_wmem_alloc accounts skb truesize, - * including skb overhead. But thats OK. + /* TCP Small Queues : + * Control number of packets in qdisc/devices to two packets / or ~1 ms. + * This allows for : + * - better RTT estimation and ACK scheduling + * - faster recovery + * - high rates */ - if (atomic_read(&sk->sk_wmem_alloc) >= sysctl_tcp_limit_output_bytes) { + limit = max(skb->truesize, sk->sk_pacing_rate >> 10); + + if (atomic_read(&sk->sk_wmem_alloc) > limit) { set_bit(TSQ_THROTTLED, &tp->tsq_flags); break; } + limit = mss_now; if (tso_segs > 1 && !tcp_urg_mode(tp)) limit = tcp_mss_split_point(sk, skb, mss_now, From 5a0068deb611109c5ba77358be533f763f395ee4 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Fri, 27 Sep 2013 12:22:15 -0400 Subject: [PATCH 286/459] bonding: Fix broken promiscuity reference counting issue Recently grabbed this report: https://bugzilla.redhat.com/show_bug.cgi?id=1005567 Of an issue in which the bonding driver, with an attached vlan encountered the following errors when bond0 was taken down and back up: dummy1: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken. The error occurs because, during __bond_release_one, if we release our last slave, we take on a random mac address and issue a NETDEV_CHANGEADDR notification. With an attached vlan, the vlan may see that the vlan and bond mac address were in sync, but no longer are. This triggers a call to dev_uc_add and dev_set_rx_mode, which enables IFF_PROMISC on the bond device. Then, when we complete __bond_release_one, we use the current state of the bond flags to determine if we should decrement the promiscuity of the releasing slave. But since the bond changed promiscuity state during the release operation, we incorrectly decrement the slave promisc count when it wasn't in promiscuous mode to begin with, causing the above error Fix is pretty simple, just cache the bonding flags at the start of the function and use those when determining the need to set promiscuity. This is also needed for the ALLMULTI flag CC: Jay Vosburgh CC: Andy Gospodarek CC: Mark Wu CC: "David S. Miller" Reported-by: Mark Wu Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 55bbb8b8200c..e883bfe2e727 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1724,6 +1724,7 @@ static int __bond_release_one(struct net_device *bond_dev, struct bonding *bond = netdev_priv(bond_dev); struct slave *slave, *oldcurrent; struct sockaddr addr; + int old_flags = bond_dev->flags; netdev_features_t old_features = bond_dev->features; /* slave is not a slave or master is not master of this slave */ @@ -1855,12 +1856,18 @@ static int __bond_release_one(struct net_device *bond_dev, * bond_change_active_slave(..., NULL) */ if (!USES_PRIMARY(bond->params.mode)) { - /* unset promiscuity level from slave */ - if (bond_dev->flags & IFF_PROMISC) + /* unset promiscuity level from slave + * NOTE: The NETDEV_CHANGEADDR call above may change the value + * of the IFF_PROMISC flag in the bond_dev, but we need the + * value of that flag before that change, as that was the value + * when this slave was attached, so we cache at the start of the + * function and use it here. Same goes for ALLMULTI below + */ + if (old_flags & IFF_PROMISC) dev_set_promiscuity(slave_dev, -1); /* unset allmulti level from slave */ - if (bond_dev->flags & IFF_ALLMULTI) + if (old_flags & IFF_ALLMULTI) dev_set_allmulti(slave_dev, -1); bond_hw_addr_flush(bond_dev, slave_dev); From 3f3f0960aff951c5df6e42ce292d1593a2520646 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 30 Sep 2013 21:16:17 -0700 Subject: [PATCH 287/459] Revert "powerpc/83xx: gianfar_ptp: select 1588 clock source through dts file" This reverts commit 894116bd0e9b7749a0c4b6c62dec13c2a0ccef68. I applied the wrong version of this patch, correct version coming up. Signed-off-by: David S. Miller --- .../devicetree/bindings/net/fsl-tsec-phy.txt | 16 +--------------- drivers/net/ethernet/freescale/gianfar_ptp.c | 4 +--- 2 files changed, 2 insertions(+), 18 deletions(-) diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index eb06059f3cf3..2c6be0377f55 100644 --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -86,7 +86,6 @@ General Properties: Clock Properties: - - fsl,cksel Timer reference clock source. - fsl,tclk-period Timer reference clock period in nanoseconds. - fsl,tmr-prsc Prescaler, divides the output clock. - fsl,tmr-add Frequency compensation value. @@ -98,7 +97,7 @@ Clock Properties: clock. You must choose these carefully for the clock to work right. Here is how to figure good values: - TimerOsc = selected reference clock MHz + TimerOsc = system clock MHz tclk_period = desired clock period nanoseconds NominalFreq = 1000 / tclk_period MHz FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0) @@ -115,18 +114,6 @@ Clock Properties: Pulse Per Second (PPS) signal, since this will be offered to the PPS subsystem to synchronize the Linux clock. - "fsl,cksel" property allows to select different reference clock - sources: - - <0> - external high precision timer reference clock (TSEC_TMR_CLK - input is used for this purpose); - <1> - eTSEC system clock; - <2> - eTSEC1 transmit clock; - <3> - RTC clock input. - - When this attribute is not used, eTSEC system clock will serve as - IEEE 1588 timer reference clock. - Example: ptp_clock@24E00 { @@ -134,7 +121,6 @@ Example: reg = <0x24E00 0xB0>; interrupts = <12 0x8 13 0x8>; interrupt-parent = < &ipic >; - fsl,cksel = <1>; fsl,tclk-period = <10>; fsl,tmr-prsc = <100>; fsl,tmr-add = <0x999999A4>; diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c index e006a09ba899..098f133908ae 100644 --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -452,9 +452,7 @@ static int gianfar_ptp_probe(struct platform_device *dev) err = -ENODEV; etsects->caps = ptp_gianfar_caps; - - if (get_of_u32(node, "fsl,cksel", &etsects->cksel)) - etsects->cksel = DEFAULT_CKSEL; + etsects->cksel = DEFAULT_CKSEL; if (get_of_u32(node, "fsl,tclk-period", &etsects->tclk_period) || get_of_u32(node, "fsl,tmr-prsc", &etsects->tmr_prsc) || From e58f6f4fb4eada7867014bfaec898f03afbce5c2 Mon Sep 17 00:00:00 2001 From: Aida Mynzhasova Date: Fri, 27 Sep 2013 17:40:27 +0400 Subject: [PATCH 288/459] powerpc/83xx: gianfar_ptp: select 1588 clock source through dts file Currently IEEE 1588 timer reference clock source is determined through hard-coded value in gianfar_ptp driver. This patch allows to select ptp clock source by means of device tree file node. For instance: fsl,cksel = <0>; for using external (TSEC_TMR_CLK input) high precision timer reference clock. Other acceptable values: <1> : eTSEC system clock <2> : eTSEC1 transmit clock <3> : RTC clock input When this attribute isn't used, eTSEC system clock will serve as IEEE 1588 timer reference clock. Signed-off-by: Aida Mynzhasova Acked-by: Kumar Gala Signed-off-by: David S. Miller --- .../devicetree/bindings/net/fsl-tsec-phy.txt | 18 +++++++++++++++++- drivers/net/ethernet/freescale/gianfar_ptp.c | 4 +++- 2 files changed, 20 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index 2c6be0377f55..d2ea4605d078 100644 --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -86,6 +86,7 @@ General Properties: Clock Properties: + - fsl,cksel Timer reference clock source. - fsl,tclk-period Timer reference clock period in nanoseconds. - fsl,tmr-prsc Prescaler, divides the output clock. - fsl,tmr-add Frequency compensation value. @@ -97,7 +98,7 @@ Clock Properties: clock. You must choose these carefully for the clock to work right. Here is how to figure good values: - TimerOsc = system clock MHz + TimerOsc = selected reference clock MHz tclk_period = desired clock period nanoseconds NominalFreq = 1000 / tclk_period MHz FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0) @@ -114,6 +115,20 @@ Clock Properties: Pulse Per Second (PPS) signal, since this will be offered to the PPS subsystem to synchronize the Linux clock. + Reference clock source is determined by the value, which is holded + in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the + value, which will be directly written in those bits, that is why, + according to reference manual, the next clock sources can be used: + + <0> - external high precision timer reference clock (TSEC_TMR_CLK + input is used for this purpose); + <1> - eTSEC system clock; + <2> - eTSEC1 transmit clock; + <3> - RTC clock input. + + When this attribute is not used, eTSEC system clock will serve as + IEEE 1588 timer reference clock. + Example: ptp_clock@24E00 { @@ -121,6 +136,7 @@ Example: reg = <0x24E00 0xB0>; interrupts = <12 0x8 13 0x8>; interrupt-parent = < &ipic >; + fsl,cksel = <1>; fsl,tclk-period = <10>; fsl,tmr-prsc = <100>; fsl,tmr-add = <0x999999A4>; diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c index 098f133908ae..e006a09ba899 100644 --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -452,7 +452,9 @@ static int gianfar_ptp_probe(struct platform_device *dev) err = -ENODEV; etsects->caps = ptp_gianfar_caps; - etsects->cksel = DEFAULT_CKSEL; + + if (get_of_u32(node, "fsl,cksel", &etsects->cksel)) + etsects->cksel = DEFAULT_CKSEL; if (get_of_u32(node, "fsl,tclk-period", &etsects->tclk_period) || get_of_u32(node, "fsl,tmr-prsc", &etsects->tmr_prsc) || From 3da812d860755925da890e8c713f2d2e2d7b1bae Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sun, 29 Sep 2013 05:40:50 +0200 Subject: [PATCH 289/459] ipv6: gre: correct calculation of max_headroom gre_hlen already accounts for sizeof(struct ipv6_hdr) + gre header, so initialize max_headroom to zero. Otherwise the if (encap_limit >= 0) { max_headroom += 8; mtu -= 8; } increments an uninitialized variable before max_headroom was reset. Found with coverity: 728539 Cc: Dmitry Kozlov Signed-off-by: Hannes Frederic Sowa Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index 6b26e9feafb9..7bb5446b9d73 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -618,7 +618,7 @@ static netdev_tx_t ip6gre_xmit2(struct sk_buff *skb, struct ip6_tnl *tunnel = netdev_priv(dev); struct net_device *tdev; /* Device to other host */ struct ipv6hdr *ipv6h; /* Our new IP header */ - unsigned int max_headroom; /* The extra header space needed */ + unsigned int max_headroom = 0; /* The extra header space needed */ int gre_hlen; struct ipv6_tel_txoption opt; int mtu; @@ -693,7 +693,7 @@ static netdev_tx_t ip6gre_xmit2(struct sk_buff *skb, skb_scrub_packet(skb, !net_eq(tunnel->net, dev_net(dev))); - max_headroom = LL_RESERVED_SPACE(tdev) + gre_hlen + dst->header_len; + max_headroom += LL_RESERVED_SPACE(tdev) + gre_hlen + dst->header_len; if (skb_headroom(skb) < max_headroom || skb_shared(skb) || (skb_cloned(skb) && !skb_clone_writable(skb, 0))) { From 437a3ae1d0b42197928d52e1108bc2fdc14d23fd Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 30 Sep 2013 15:18:27 +0200 Subject: [PATCH 290/459] ethernet: moxa: fix incorrect placement of __initdata tag __initdata tag should be placed between the variable name and equal sign for the variable to be placed in the intended .init.data section. In this particular case __initdata is incorrect as moxart_mac_driver can be used after the driver gets initialized. Also while at it static-ize moxart_mac_driver. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Kyungmin Park Signed-off-by: David S. Miller --- drivers/net/ethernet/moxa/moxart_ether.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c index 83c2091c9c23..bd1a2d2bc2ae 100644 --- a/drivers/net/ethernet/moxa/moxart_ether.c +++ b/drivers/net/ethernet/moxa/moxart_ether.c @@ -543,7 +543,7 @@ static const struct of_device_id moxart_mac_match[] = { { } }; -struct __initdata platform_driver moxart_mac_driver = { +static struct platform_driver moxart_mac_driver = { .probe = moxart_mac_probe, .remove = moxart_remove, .driver = { From e2401654dd0f5f3fb7a8d80dad9554d73d7ca394 Mon Sep 17 00:00:00 2001 From: Salam Noureddine Date: Sun, 29 Sep 2013 13:39:42 -0700 Subject: [PATCH 291/459] ipv4 igmp: use in_dev_put in timer handlers instead of __in_dev_put It is possible for the timer handlers to run after the call to ip_mc_down so use in_dev_put instead of __in_dev_put in the handler function in order to do proper cleanup when the refcnt reaches 0. Otherwise, the refcnt can reach zero without the in_device being destroyed and we end up leaking a reference to the net_device and see messages like the following, unregister_netdevice: waiting for eth0 to become free. Usage count = 1 Tested on linux-3.4.43. Signed-off-by: Salam Noureddine Signed-off-by: David S. Miller --- net/ipv4/igmp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index dace87f06e5f..7defdc9ba167 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -736,7 +736,7 @@ static void igmp_gq_timer_expire(unsigned long data) in_dev->mr_gq_running = 0; igmpv3_send_report(in_dev, NULL); - __in_dev_put(in_dev); + in_dev_put(in_dev); } static void igmp_ifc_timer_expire(unsigned long data) @@ -749,7 +749,7 @@ static void igmp_ifc_timer_expire(unsigned long data) igmp_ifc_start_timer(in_dev, unsolicited_report_interval(in_dev)); } - __in_dev_put(in_dev); + in_dev_put(in_dev); } static void igmp_ifc_event(struct in_device *in_dev) From 9260d3e1013701aa814d10c8fc6a9f92bd17d643 Mon Sep 17 00:00:00 2001 From: Salam Noureddine Date: Sun, 29 Sep 2013 13:41:34 -0700 Subject: [PATCH 292/459] ipv6 mcast: use in6_dev_put in timer handlers instead of __in6_dev_put It is possible for the timer handlers to run after the call to ipv6_mc_down so use in6_dev_put instead of __in6_dev_put in the handler function in order to do proper cleanup when the refcnt reaches 0. Otherwise, the refcnt can reach zero without the inet6_dev being destroyed and we end up leaking a reference to the net_device and see messages like the following, unregister_netdevice: waiting for eth0 to become free. Usage count = 1 Tested on linux-3.4.43. Signed-off-by: Salam Noureddine Signed-off-by: David S. Miller --- net/ipv6/mcast.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index 096cd67b737c..d18f9f903db6 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -2034,7 +2034,7 @@ static void mld_dad_timer_expire(unsigned long data) if (idev->mc_dad_count) mld_dad_start_timer(idev, idev->mc_maxdelay); } - __in6_dev_put(idev); + in6_dev_put(idev); } static int ip6_mc_del1_src(struct ifmcaddr6 *pmc, int sfmode, @@ -2379,7 +2379,7 @@ static void mld_gq_timer_expire(unsigned long data) idev->mc_gq_running = 0; mld_send_report(idev, NULL); - __in6_dev_put(idev); + in6_dev_put(idev); } static void mld_ifc_timer_expire(unsigned long data) @@ -2392,7 +2392,7 @@ static void mld_ifc_timer_expire(unsigned long data) if (idev->mc_ifc_count) mld_ifc_start_timer(idev, idev->mc_maxdelay); } - __in6_dev_put(idev); + in6_dev_put(idev); } static void mld_ifc_event(struct inet6_dev *idev) From 45906723578f768d029ba7774cd97b435f2c5125 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 30 Sep 2013 14:16:41 +0200 Subject: [PATCH 293/459] skbuff: size of hole is wrong in a comment Since commit c93bdd0e03e8 ("netvm: allow skb allocation to use PFMEMALLOC reserves"), hole size is one bit less than what is written in the comment. Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- include/linux/skbuff.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 2ddb48d9312c..c2d89335f637 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -498,7 +498,7 @@ struct sk_buff { * headers if needed */ __u8 encapsulation:1; - /* 7/9 bit hole (depending on ndisc_nodetype presence) */ + /* 6/8 bit hole (depending on ndisc_nodetype presence) */ kmemcheck_bitfield_end(flags2); #if defined CONFIG_NET_DMA || defined CONFIG_NET_RX_BUSY_POLL From ded797547548a5b8e7b92383a41e4c0e6b0ecb7f Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Tue, 24 Sep 2013 00:50:25 +0200 Subject: [PATCH 294/459] irq: Force hardirq exit's softirq processing on its own stack The commit facd8b80c67a3cf64a467c4a2ac5fb31f2e6745b ("irq: Sanitize invoke_softirq") converted irq exit calls of do_softirq() to __do_softirq() on all architectures, assuming it was only used there for its irq disablement properties. But as a side effect, the softirqs processed in the end of the hardirq are always called on the inline current stack that is used by irq_exit() instead of the softirq stack provided by the archs that override do_softirq(). The result is mostly safe if the architecture runs irq_exit() on a separate irq stack because then softirqs are processed on that same stack that is near empty at this stage (assuming hardirq aren't nesting). Otherwise irq_exit() runs in the task stack and so does the softirq too. The interrupted call stack can be randomly deep already and the softirq can dig through it even further. To add insult to the injury, this softirq can be interrupted by a new hardirq, maximizing the chances for a stack overrun as reported in powerpc for example: do_IRQ: stack overflow: 1920 CPU: 0 PID: 1602 Comm: qemu-system-ppc Not tainted 3.10.4-300.1.fc19.ppc64p7 #1 Call Trace: [c0000000050a8740] .show_stack+0x130/0x200 (unreliable) [c0000000050a8810] .dump_stack+0x28/0x3c [c0000000050a8880] .do_IRQ+0x2b8/0x2c0 [c0000000050a8930] hardware_interrupt_common+0x154/0x180 --- Exception: 501 at .cp_start_xmit+0x3a4/0x820 [8139cp] LR = .cp_start_xmit+0x390/0x820 [8139cp] [c0000000050a8d40] .dev_hard_start_xmit+0x394/0x640 [c0000000050a8e00] .sch_direct_xmit+0x110/0x260 [c0000000050a8ea0] .dev_queue_xmit+0x260/0x630 [c0000000050a8f40] .br_dev_queue_push_xmit+0xc4/0x130 [bridge] [c0000000050a8fc0] .br_dev_xmit+0x198/0x270 [bridge] [c0000000050a9070] .dev_hard_start_xmit+0x394/0x640 [c0000000050a9130] .dev_queue_xmit+0x428/0x630 [c0000000050a91d0] .ip_finish_output+0x2a4/0x550 [c0000000050a9290] .ip_local_out+0x50/0x70 [c0000000050a9310] .ip_queue_xmit+0x148/0x420 [c0000000050a93b0] .tcp_transmit_skb+0x4e4/0xaf0 [c0000000050a94a0] .__tcp_ack_snd_check+0x7c/0xf0 [c0000000050a9520] .tcp_rcv_established+0x1e8/0x930 [c0000000050a95f0] .tcp_v4_do_rcv+0x21c/0x570 [c0000000050a96c0] .tcp_v4_rcv+0x734/0x930 [c0000000050a97a0] .ip_local_deliver_finish+0x184/0x360 [c0000000050a9840] .ip_rcv_finish+0x148/0x400 [c0000000050a98d0] .__netif_receive_skb_core+0x4f8/0xb00 [c0000000050a99d0] .netif_receive_skb+0x44/0x110 [c0000000050a9a70] .br_handle_frame_finish+0x2bc/0x3f0 [bridge] [c0000000050a9b20] .br_nf_pre_routing_finish+0x2ac/0x420 [bridge] [c0000000050a9bd0] .br_nf_pre_routing+0x4dc/0x7d0 [bridge] [c0000000050a9c70] .nf_iterate+0x114/0x130 [c0000000050a9d30] .nf_hook_slow+0xb4/0x1e0 [c0000000050a9e00] .br_handle_frame+0x290/0x330 [bridge] [c0000000050a9ea0] .__netif_receive_skb_core+0x34c/0xb00 [c0000000050a9fa0] .netif_receive_skb+0x44/0x110 [c0000000050aa040] .napi_gro_receive+0xe8/0x120 [c0000000050aa0c0] .cp_rx_poll+0x31c/0x590 [8139cp] [c0000000050aa1d0] .net_rx_action+0x1dc/0x310 [c0000000050aa2b0] .__do_softirq+0x158/0x330 [c0000000050aa3b0] .irq_exit+0xc8/0x110 [c0000000050aa430] .do_IRQ+0xdc/0x2c0 [c0000000050aa4e0] hardware_interrupt_common+0x154/0x180 --- Exception: 501 at .bad_range+0x1c/0x110 LR = .get_page_from_freelist+0x908/0xbb0 [c0000000050aa7d0] .list_del+0x18/0x50 (unreliable) [c0000000050aa850] .get_page_from_freelist+0x908/0xbb0 [c0000000050aa9e0] .__alloc_pages_nodemask+0x21c/0xae0 [c0000000050aaba0] .alloc_pages_vma+0xd0/0x210 [c0000000050aac60] .handle_pte_fault+0x814/0xb70 [c0000000050aad50] .__get_user_pages+0x1a4/0x640 [c0000000050aae60] .get_user_pages_fast+0xec/0x160 [c0000000050aaf10] .__gfn_to_pfn_memslot+0x3b0/0x430 [kvm] [c0000000050aafd0] .kvmppc_gfn_to_pfn+0x64/0x130 [kvm] [c0000000050ab070] .kvmppc_mmu_map_page+0x94/0x530 [kvm] [c0000000050ab190] .kvmppc_handle_pagefault+0x174/0x610 [kvm] [c0000000050ab270] .kvmppc_handle_exit_pr+0x464/0x9b0 [kvm] [c0000000050ab320] kvm_start_lightweight+0x1ec/0x1fc [kvm] [c0000000050ab4f0] .kvmppc_vcpu_run_pr+0x168/0x3b0 [kvm] [c0000000050ab9c0] .kvmppc_vcpu_run+0xc8/0xf0 [kvm] [c0000000050aba50] .kvm_arch_vcpu_ioctl_run+0x5c/0x1a0 [kvm] [c0000000050abae0] .kvm_vcpu_ioctl+0x478/0x730 [kvm] [c0000000050abc90] .do_vfs_ioctl+0x4ec/0x7c0 [c0000000050abd80] .SyS_ioctl+0xd4/0xf0 [c0000000050abe30] syscall_exit+0x0/0x98 Since this is a regression, this patch proposes a minimalistic and low-risk solution by blindly forcing the hardirq exit processing of softirqs on the softirq stack. This way we should reduce significantly the opportunities for task stack overflow dug by softirqs. Longer term solutions may involve extending the hardirq stack coverage to irq_exit(), etc... Reported-by: Benjamin Herrenschmidt Acked-by: Linus Torvalds Signed-off-by: Frederic Weisbecker Cc: #3.9.. Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Paul Mackerras Cc: James Hogan Cc: James E.J. Bottomley Cc: Helge Deller Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: David S. Miller Cc: Andrew Morton --- kernel/softirq.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/kernel/softirq.c b/kernel/softirq.c index 53cc09ceb0b8..d7d498d8cc4f 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -328,10 +328,19 @@ void irq_enter(void) static inline void invoke_softirq(void) { - if (!force_irqthreads) - __do_softirq(); - else + if (!force_irqthreads) { + /* + * We can safely execute softirq on the current stack if + * it is the irq stack, because it should be near empty + * at this stage. But we have no way to know if the arch + * calls irq_exit() on the irq stack. So call softirq + * in its own stack to prevent from any overrun on top + * of a potentially deep task stack. + */ + do_softirq(); + } else { wakeup_softirqd(); + } } static inline void tick_irq_exit(void) From fa365e4d729065b5e85165df3dc9699ed47489cc Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 25 Sep 2013 02:36:52 +0200 Subject: [PATCH 295/459] gpio/omap: maintain GPIO and IRQ usage separately The GPIO OMAP controller pins can be used as IRQ and GPIO independently so is necessary to keep track GPIO pins and IRQ lines usage separately to make sure that the bank will always be enabled while being used. Also move gpio_is_input() definition in preparation for the next patch that setups the controller's irq_chip driver when a caller requests an interrupt line. Cc: stable@vger.kernel.org Acked-by: Stephen Warren Tested-by: George Cherian Tested-by: Aaro Koskinen Tested-by: Lars Poeschel Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Acked-by: Santosh Shilimkar Acked-by: Tony Lindgren Signed-off-by: Javier Martinez Canillas Signed-off-by: Linus Walleij --- drivers/gpio/gpio-omap.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 0ff43552d472..a4fe038d090e 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -63,6 +63,7 @@ struct gpio_bank { struct gpio_chip chip; struct clk *dbck; u32 mod_usage; + u32 irq_usage; u32 dbck_enable_mask; bool dbck_enabled; struct device *dev; @@ -86,6 +87,9 @@ struct gpio_bank { #define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio)) #define GPIO_MOD_CTRL_BIT BIT(0) +#define BANK_USED(bank) (bank->mod_usage || bank->irq_usage) +#define LINE_USED(line, offset) (line & (1 << offset)) + static int irq_to_gpio(struct gpio_bank *bank, unsigned int gpio_irq) { return bank->chip.base + gpio_irq; @@ -420,6 +424,13 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, return 0; } +static int gpio_is_input(struct gpio_bank *bank, int mask) +{ + void __iomem *reg = bank->base + bank->regs->direction; + + return __raw_readl(reg) & mask; +} + static int gpio_irq_type(struct irq_data *d, unsigned type) { struct gpio_bank *bank = irq_data_get_irq_chip_data(d); @@ -427,7 +438,7 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) int retval; unsigned long flags; - if (WARN_ON(!bank->mod_usage)) + if (WARN_ON(!BANK_USED(bank))) return -EINVAL; #ifdef CONFIG_ARCH_OMAP1 @@ -447,6 +458,7 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) spin_lock_irqsave(&bank->lock, flags); retval = _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), type); + bank->irq_usage |= 1 << GPIO_INDEX(bank, gpio); spin_unlock_irqrestore(&bank->lock, flags); if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) @@ -603,7 +615,7 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) * If this is the first gpio_request for the bank, * enable the bank module. */ - if (!bank->mod_usage) + if (!BANK_USED(bank)) pm_runtime_get_sync(bank->dev); spin_lock_irqsave(&bank->lock, flags); @@ -619,7 +631,7 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) __raw_writel(__raw_readl(reg) | (1 << offset), reg); } - if (bank->regs->ctrl && !bank->mod_usage) { + if (bank->regs->ctrl && !BANK_USED(bank)) { void __iomem *reg = bank->base + bank->regs->ctrl; u32 ctrl; @@ -654,7 +666,7 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) bank->mod_usage &= ~(1 << offset); - if (bank->regs->ctrl && !bank->mod_usage) { + if (bank->regs->ctrl && !BANK_USED(bank)) { void __iomem *reg = bank->base + bank->regs->ctrl; u32 ctrl; @@ -672,7 +684,7 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) * If this is the last gpio to be freed in the bank, * disable the bank module. */ - if (!bank->mod_usage) + if (!BANK_USED(bank)) pm_runtime_put(bank->dev); } @@ -762,8 +774,10 @@ static void gpio_irq_shutdown(struct irq_data *d) struct gpio_bank *bank = irq_data_get_irq_chip_data(d); unsigned int gpio = irq_to_gpio(bank, d->hwirq); unsigned long flags; + unsigned offset = GPIO_INDEX(bank, gpio); spin_lock_irqsave(&bank->lock, flags); + bank->irq_usage &= ~(1 << offset); _reset_gpio(bank, gpio); spin_unlock_irqrestore(&bank->lock, flags); } @@ -897,13 +911,6 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset) return 0; } -static int gpio_is_input(struct gpio_bank *bank, int mask) -{ - void __iomem *reg = bank->base + bank->regs->direction; - - return __raw_readl(reg) & mask; -} - static int gpio_get(struct gpio_chip *chip, unsigned offset) { struct gpio_bank *bank; @@ -1400,7 +1407,7 @@ void omap2_gpio_prepare_for_idle(int pwr_mode) struct gpio_bank *bank; list_for_each_entry(bank, &omap_gpio_list, node) { - if (!bank->mod_usage || !bank->loses_context) + if (!BANK_USED(bank) || !bank->loses_context) continue; bank->power_mode = pwr_mode; @@ -1414,7 +1421,7 @@ void omap2_gpio_resume_after_idle(void) struct gpio_bank *bank; list_for_each_entry(bank, &omap_gpio_list, node) { - if (!bank->mod_usage || !bank->loses_context) + if (!BANK_USED(bank) || !bank->loses_context) continue; pm_runtime_get_sync(bank->dev); From fac7fa162a19100298d5d91359960037dc5bfca9 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 25 Sep 2013 02:36:54 +0200 Subject: [PATCH 296/459] gpio/omap: auto-setup a GPIO when used as an IRQ The OMAP GPIO controller HW requires a pin to be configured in GPIO input mode in order to operate as an interrupt input. Since drivers should not be aware of whether an interrupt pin is also a GPIO or not, the HW should be fully configured/enabled as an IRQ if a driver solely uses IRQ APIs such as request_irq(), and never calls any GPIO-related APIs. As such, add the missing HW setup to the OMAP GPIO controller's irq_chip driver. Since this bypasses the GPIO subsystem we have to ensure that another driver won't be able to request the same GPIO pin that is used as an IRQ and set its direction as output. Requesting the GPIO and setting its direction as input is allowed though. This fixes smsc911x ethernet support for tobi and igep OMAP3 boards and OMAP4 SDP SPI based ethernet that use a GPIO as an interrupt line. Cc: stable@vger.kernel.org Acked-by: Stephen Warren Tested-by: George Cherian Tested-by: Aaro Koskinen Tested-by: Lars Poeschel Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Acked-by: Santosh Shilimkar Acked-by: Tony Lindgren Signed-off-by: Javier Martinez Canillas Signed-off-by: Linus Walleij --- drivers/gpio/gpio-omap.c | 129 +++++++++++++++++++++++++-------------- 1 file changed, 83 insertions(+), 46 deletions(-) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index a4fe038d090e..89675f862308 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -424,6 +424,52 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, return 0; } +static void _enable_gpio_module(struct gpio_bank *bank, unsigned offset) +{ + if (bank->regs->pinctrl) { + void __iomem *reg = bank->base + bank->regs->pinctrl; + + /* Claim the pin for MPU */ + __raw_writel(__raw_readl(reg) | (1 << offset), reg); + } + + if (bank->regs->ctrl && !BANK_USED(bank)) { + void __iomem *reg = bank->base + bank->regs->ctrl; + u32 ctrl; + + ctrl = __raw_readl(reg); + /* Module is enabled, clocks are not gated */ + ctrl &= ~GPIO_MOD_CTRL_BIT; + __raw_writel(ctrl, reg); + bank->context.ctrl = ctrl; + } +} + +static void _disable_gpio_module(struct gpio_bank *bank, unsigned offset) +{ + void __iomem *base = bank->base; + + if (bank->regs->wkup_en && + !LINE_USED(bank->mod_usage, offset) && + !LINE_USED(bank->irq_usage, offset)) { + /* Disable wake-up during idle for dynamic tick */ + _gpio_rmw(base, bank->regs->wkup_en, 1 << offset, 0); + bank->context.wake_en = + __raw_readl(bank->base + bank->regs->wkup_en); + } + + if (bank->regs->ctrl && !BANK_USED(bank)) { + void __iomem *reg = bank->base + bank->regs->ctrl; + u32 ctrl; + + ctrl = __raw_readl(reg); + /* Module is disabled, clocks are gated */ + ctrl |= GPIO_MOD_CTRL_BIT; + __raw_writel(ctrl, reg); + bank->context.ctrl = ctrl; + } +} + static int gpio_is_input(struct gpio_bank *bank, int mask) { void __iomem *reg = bank->base + bank->regs->direction; @@ -437,9 +483,10 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) unsigned gpio = 0; int retval; unsigned long flags; + unsigned offset; - if (WARN_ON(!BANK_USED(bank))) - return -EINVAL; + if (!BANK_USED(bank)) + pm_runtime_get_sync(bank->dev); #ifdef CONFIG_ARCH_OMAP1 if (d->irq > IH_MPUIO_BASE) @@ -457,7 +504,16 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) return -EINVAL; spin_lock_irqsave(&bank->lock, flags); - retval = _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), type); + offset = GPIO_INDEX(bank, gpio); + retval = _set_gpio_triggering(bank, offset, type); + if (!LINE_USED(bank->mod_usage, offset)) { + _enable_gpio_module(bank, offset); + _set_gpio_direction(bank, offset, 1); + } else if (!gpio_is_input(bank, 1 << offset)) { + spin_unlock_irqrestore(&bank->lock, flags); + return -EINVAL; + } + bank->irq_usage |= 1 << GPIO_INDEX(bank, gpio); spin_unlock_irqrestore(&bank->lock, flags); @@ -620,30 +676,14 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) spin_lock_irqsave(&bank->lock, flags); /* Set trigger to none. You need to enable the desired trigger with - * request_irq() or set_irq_type(). + * request_irq() or set_irq_type(). Only do this if the IRQ line has + * not already been requested. */ - _set_gpio_triggering(bank, offset, IRQ_TYPE_NONE); - - if (bank->regs->pinctrl) { - void __iomem *reg = bank->base + bank->regs->pinctrl; - - /* Claim the pin for MPU */ - __raw_writel(__raw_readl(reg) | (1 << offset), reg); + if (!LINE_USED(bank->irq_usage, offset)) { + _set_gpio_triggering(bank, offset, IRQ_TYPE_NONE); + _enable_gpio_module(bank, offset); } - - if (bank->regs->ctrl && !BANK_USED(bank)) { - void __iomem *reg = bank->base + bank->regs->ctrl; - u32 ctrl; - - ctrl = __raw_readl(reg); - /* Module is enabled, clocks are not gated */ - ctrl &= ~GPIO_MOD_CTRL_BIT; - __raw_writel(ctrl, reg); - bank->context.ctrl = ctrl; - } - bank->mod_usage |= 1 << offset; - spin_unlock_irqrestore(&bank->lock, flags); return 0; @@ -652,31 +692,11 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) { struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); - void __iomem *base = bank->base; unsigned long flags; spin_lock_irqsave(&bank->lock, flags); - - if (bank->regs->wkup_en) { - /* Disable wake-up during idle for dynamic tick */ - _gpio_rmw(base, bank->regs->wkup_en, 1 << offset, 0); - bank->context.wake_en = - __raw_readl(bank->base + bank->regs->wkup_en); - } - bank->mod_usage &= ~(1 << offset); - - if (bank->regs->ctrl && !BANK_USED(bank)) { - void __iomem *reg = bank->base + bank->regs->ctrl; - u32 ctrl; - - ctrl = __raw_readl(reg); - /* Module is disabled, clocks are gated */ - ctrl |= GPIO_MOD_CTRL_BIT; - __raw_writel(ctrl, reg); - bank->context.ctrl = ctrl; - } - + _disable_gpio_module(bank, offset); _reset_gpio(bank, bank->chip.base + offset); spin_unlock_irqrestore(&bank->lock, flags); @@ -778,8 +798,16 @@ static void gpio_irq_shutdown(struct irq_data *d) spin_lock_irqsave(&bank->lock, flags); bank->irq_usage &= ~(1 << offset); + _disable_gpio_module(bank, offset); _reset_gpio(bank, gpio); spin_unlock_irqrestore(&bank->lock, flags); + + /* + * If this is the last IRQ to be freed in the bank, + * disable the bank module. + */ + if (!BANK_USED(bank)) + pm_runtime_put(bank->dev); } static void gpio_ack_irq(struct irq_data *d) @@ -929,13 +957,22 @@ static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) { struct gpio_bank *bank; unsigned long flags; + int retval = 0; bank = container_of(chip, struct gpio_bank, chip); spin_lock_irqsave(&bank->lock, flags); + + if (LINE_USED(bank->irq_usage, offset)) { + retval = -EINVAL; + goto exit; + } + bank->set_dataout(bank, offset, value); _set_gpio_direction(bank, offset, 0); + +exit: spin_unlock_irqrestore(&bank->lock, flags); - return 0; + return retval; } static int gpio_debounce(struct gpio_chip *chip, unsigned offset, From 4fc4b274f9b3b5f18896a069e5f9f8dd8f0d450a Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 1 Oct 2013 14:31:53 +0200 Subject: [PATCH 297/459] usb: musb: dsps: do not bind to "musb-hdrc" This went unnoticed in durin the merge window: The dsps driver creates a child device for the musb core driver _and_ attaches the of_node to it so devm_usb_get_phy_by_phandle() grabs the correct phy and attaches the devm resources to the proper device. We could also use the parent device but then devm would attach the resource to the wrong device and it would be destroyed once the parent device is gone - not the device that is used by the musb core driver. If the phy is now not available then dsps_musb_init() / devm_usb_get_phy_by_phandle() returns with EPROBE_DEFER. Since the of_node is attached it tries OF drivers as well and matches the driver against DSPS. That one creates a new child device for the musb core driver which gets probed immediately. The whole thing repeats itself until the stack overflows. I belive the same problem exists in ux500 glue code (since 313bdb11 ("usb: musb: ux500: add device tree probing support") but the drivers are now probed in the right order so they don't see it. The problem is that the dsps driver gets bound to the musb-child device due to the same of_node / matching binding. I don't really agree with having yet another child node in DT to fix this. Ideally we would have musb core driver with DT bindings and according to the binding we would select the few extra hacks / gleue layer. Therefore I suggest the driver to reject the musb-core device. Cc: Lee Jones Tested-by: Tom Rini Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_dsps.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 4047cbb91bac..bd4138d80a48 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -535,6 +535,9 @@ static int dsps_probe(struct platform_device *pdev) struct dsps_glue *glue; int ret; + if (!strcmp(pdev->name, "musb-hdrc")) + return -ENODEV; + match = of_match_node(musb_dsps_of_match, pdev->dev.of_node); if (!match) { dev_err(&pdev->dev, "fail to get matching of_match struct\n"); From 8854894c040cd68b463dccf267308250b336df40 Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Fri, 27 Sep 2013 12:28:54 +0200 Subject: [PATCH 298/459] usb: gadget: f_fs: fix error handling This patch add missing error check in ffs_func_bind() function, after ffs_do_descs() function call for high speed descriptors. Without this check it's possible that the module will try dereference incorrect pointer. [ balbi@ti.com : removed trailing empty line ] Acked-by: Michal Nazarewicz Signed-off-by: Robert Baldyga Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_fs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 1a66c5baa0d1..0da66bacb0d4 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -2264,6 +2264,8 @@ static int ffs_func_bind(struct usb_configuration *c, data->raw_descs + ret, (sizeof data->raw_descs) - ret, __ffs_func_bind_do_descs, func); + if (unlikely(ret < 0)) + goto error; } /* From b377216bd2d313b393ddd4b04c71f700842d104b Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Tue, 24 Sep 2013 11:24:28 +0200 Subject: [PATCH 299/459] usb: gadget: s3c-hsotg: fix can_write limit for non-periodic endpoints Value of can_write variable in s3c_hsotg_write_fifo function should be limited to 512 only for non-periodic endpoints. There was some discrepancy between comment and code, because comment suggests correct behavior, but in the code limit was applied to periodic endpoints too. So there is additional check causing the limitation concerns only non-periodic endpoints. Signed-off-by: Robert Baldyga Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c-hsotg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 6bddf1aa2347..a8a99e4748d5 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -543,7 +543,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, * FIFO, requests of >512 cause the endpoint to get stuck with a * fragment of the end of the transfer in it. */ - if (can_write > 512) + if (can_write > 512 && !periodic) can_write = 512; /* From 3c70b8eeda596069258772afabf2ab0b1aa017f0 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 1 Oct 2013 16:41:22 +0200 Subject: [PATCH 300/459] fuse: don't check_submounts_and_drop() in RCU walk If revalidate finds an invalid dentry in RCU walk mode, let the VFS deal with it instead of calling check_submounts_and_drop() which is not prepared for being called from RCU walk. Signed-off-by: Miklos Szeredi Cc: stable@vger.kernel.org --- fs/fuse/dir.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 62b43b577bfc..9b16806f11da 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -259,7 +259,8 @@ out: invalid: ret = 0; - if (check_submounts_and_drop(entry) != 0) + + if (!(flags & LOOKUP_RCU) && check_submounts_and_drop(entry) != 0) ret = 1; goto out; } From 6314efee3cfeea2da12dbc05edfa20e5a42391bd Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 1 Oct 2013 16:41:22 +0200 Subject: [PATCH 301/459] fuse: readdirplus: fix RCU walk Doing dput(parent) is not valid in RCU walk mode. In RCU mode it would probably be okay to update the parent flags, but it's actually not necessary most of the time... So only set the FUSE_I_ADVISE_RDPLUS flag on the parent when the entry was recently initialized by READDIRPLUS. This is achieved by setting FUSE_I_INIT_RDPLUS on entries added by READDIRPLUS and only dropping out of RCU mode if this flag is set. FUSE_I_INIT_RDPLUS is cleared once the FUSE_I_ADVISE_RDPLUS flag is set in the parent. Reported-by: Al Viro Signed-off-by: Miklos Szeredi Cc: stable@vger.kernel.org --- fs/fuse/dir.c | 12 +++++++++--- fs/fuse/fuse_i.h | 2 ++ 2 files changed, 11 insertions(+), 3 deletions(-) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 9b16806f11da..a75159846a75 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -182,6 +182,7 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags) struct inode *inode; struct dentry *parent; struct fuse_conn *fc; + struct fuse_inode *fi; int ret; inode = ACCESS_ONCE(entry->d_inode); @@ -228,7 +229,7 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags) if (!err && !outarg.nodeid) err = -ENOENT; if (!err) { - struct fuse_inode *fi = get_fuse_inode(inode); + fi = get_fuse_inode(inode); if (outarg.nodeid != get_node_id(inode)) { fuse_queue_forget(fc, forget, outarg.nodeid, 1); goto invalid; @@ -246,8 +247,11 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags) attr_version); fuse_change_entry_timeout(entry, &outarg); } else if (inode) { - fc = get_fuse_conn(inode); - if (fc->readdirplus_auto) { + fi = get_fuse_inode(inode); + if (flags & LOOKUP_RCU) { + if (test_bit(FUSE_I_INIT_RDPLUS, &fi->state)) + return -ECHILD; + } else if (test_and_clear_bit(FUSE_I_INIT_RDPLUS, &fi->state)) { parent = dget_parent(entry); fuse_advise_use_readdirplus(parent->d_inode); dput(parent); @@ -1292,6 +1296,8 @@ static int fuse_direntplus_link(struct file *file, } found: + if (fc->readdirplus_auto) + set_bit(FUSE_I_INIT_RDPLUS, &get_fuse_inode(inode)->state); fuse_change_entry_timeout(dentry, o); err = 0; diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h index 5ced199b50bb..5b9e6f3b6aef 100644 --- a/fs/fuse/fuse_i.h +++ b/fs/fuse/fuse_i.h @@ -115,6 +115,8 @@ struct fuse_inode { enum { /** Advise readdirplus */ FUSE_I_ADVISE_RDPLUS, + /** Initialized with readdirplus */ + FUSE_I_INIT_RDPLUS, /** An operation changing file size is in progress */ FUSE_I_SIZE_UNSTABLE, }; From 698fa1d163c560343b8012a0a916440d076b6c8a Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 1 Oct 2013 16:41:23 +0200 Subject: [PATCH 302/459] fuse: no RCU mode in fuse_access() fuse_access() is never called in RCU walk, only on the final component of access(2) and chdir(2)... Signed-off-by: Miklos Szeredi --- fs/fuse/dir.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index a75159846a75..b7989f2ab4c4 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -1068,6 +1068,8 @@ static int fuse_access(struct inode *inode, int mask) struct fuse_access_in inarg; int err; + BUG_ON(mask & MAY_NOT_BLOCK); + if (fc->no_access) return 0; @@ -1155,9 +1157,6 @@ static int fuse_permission(struct inode *inode, int mask) noticed immediately, only after the attribute timeout has expired */ } else if (mask & (MAY_ACCESS | MAY_CHDIR)) { - if (mask & MAY_NOT_BLOCK) - return -ECHILD; - err = fuse_access(inode, mask); } else if ((mask & MAY_EXEC) && S_ISREG(inode->i_mode)) { if (!(inode->i_mode & S_IXUGO)) { From 7167cf0e8cd10287b7912b9ffcccd9616f382922 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Tue, 1 Oct 2013 08:17:10 +0200 Subject: [PATCH 303/459] ll_temac: Reset dma descriptors indexes on ndo_open The dma descriptors indexes are only initialized on the probe function. If a packet is on the buffer when temac_stop is called, the dma descriptors indexes can be left on a incorrect state where no other package can be sent. So an interface could be left in an usable state after ifdow/ifup. This patch makes sure that the descriptors indexes are in a proper status when the device is open. Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/ll_temac_main.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index b88121f240ca..0029148077a9 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -297,6 +297,12 @@ static int temac_dma_bd_init(struct net_device *ndev) lp->rx_bd_p + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1))); lp->dma_out(lp, TX_CURDESC_PTR, lp->tx_bd_p); + /* Init descriptor indexes */ + lp->tx_bd_ci = 0; + lp->tx_bd_next = 0; + lp->tx_bd_tail = 0; + lp->rx_bd_ci = 0; + return 0; out: From 1ed98ed55d6bf47d5a21b1e2db35ceb8b9a4c91c Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Tue, 1 Oct 2013 02:23:48 -0400 Subject: [PATCH 304/459] qlcnic: Fix SR-IOV configuration o Interface needs to be brought down and up while configuring SR-IOV. Protect interface up/down using rtnl_lock()/rtnl_unlock() Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c index 330d9a8774ad..686f460b1502 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c @@ -397,6 +397,7 @@ static int qlcnic_pci_sriov_disable(struct qlcnic_adapter *adapter) { struct net_device *netdev = adapter->netdev; + rtnl_lock(); if (netif_running(netdev)) __qlcnic_down(adapter, netdev); @@ -407,12 +408,15 @@ static int qlcnic_pci_sriov_disable(struct qlcnic_adapter *adapter) /* After disabling SRIOV re-init the driver in default mode configure opmode based on op_mode of function */ - if (qlcnic_83xx_configure_opmode(adapter)) + if (qlcnic_83xx_configure_opmode(adapter)) { + rtnl_unlock(); return -EIO; + } if (netif_running(netdev)) __qlcnic_up(adapter, netdev); + rtnl_unlock(); return 0; } @@ -533,6 +537,7 @@ static int qlcnic_pci_sriov_enable(struct qlcnic_adapter *adapter, int num_vfs) return -EIO; } + rtnl_lock(); if (netif_running(netdev)) __qlcnic_down(adapter, netdev); @@ -555,6 +560,7 @@ static int qlcnic_pci_sriov_enable(struct qlcnic_adapter *adapter, int num_vfs) __qlcnic_up(adapter, netdev); error: + rtnl_unlock(); return err; } From 3e08f4a72f689c6296d336c2aab4bddd60c93ae2 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 1 Oct 2013 11:33:59 +0200 Subject: [PATCH 305/459] ip_tunnel: Fix a memory corruption in ip_tunnel_xmit We might extend the used aera of a skb beyond the total headroom when we install the ipip header. Fix this by calling skb_cow_head() unconditionally. Bug was introduced with commit c544193214 ("GRE: Refactor GRE tunneling code.") Cc: Pravin Shelar Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- net/ipv4/ip_tunnel.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index d3fbad422e0e..dfc6d8a3caa7 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -642,13 +642,13 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, max_headroom = LL_RESERVED_SPACE(rt->dst.dev) + sizeof(struct iphdr) + rt->dst.header_len; - if (max_headroom > dev->needed_headroom) { + if (max_headroom > dev->needed_headroom) dev->needed_headroom = max_headroom; - if (skb_cow_head(skb, dev->needed_headroom)) { - dev->stats.tx_dropped++; - dev_kfree_skb(skb); - return; - } + + if (skb_cow_head(skb, dev->needed_headroom)) { + dev->stats.tx_dropped++; + dev_kfree_skb(skb); + return; } err = iptunnel_xmit(rt, skb, fl4.saddr, fl4.daddr, protocol, From 67013282627185aeec2fb92c75868dcace0d25b4 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 1 Oct 2013 11:34:48 +0200 Subject: [PATCH 306/459] ip_tunnel: Add fallback tunnels to the hash lists Currently we can not update the tunnel parameters of the fallback tunnels because we don't find them in the hash lists. Fix this by adding them on initialization. Bug was introduced with commit c544193214 ("GRE: Refactor GRE tunneling code.") Cc: Pravin Shelar Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- net/ipv4/ip_tunnel.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index dfc6d8a3caa7..895a3535321b 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -853,8 +853,10 @@ int ip_tunnel_init_net(struct net *net, int ip_tnl_net_id, /* FB netdevice is special: we have one, and only one per netns. * Allowing to move it to another netns is clearly unsafe. */ - if (!IS_ERR(itn->fb_tunnel_dev)) + if (!IS_ERR(itn->fb_tunnel_dev)) { itn->fb_tunnel_dev->features |= NETIF_F_NETNS_LOCAL; + ip_tunnel_add(itn, netdev_priv(itn->fb_tunnel_dev)); + } rtnl_unlock(); return PTR_RET(itn->fb_tunnel_dev); From 78a3694d44a029242dd0830b34ab20ef1704be35 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 1 Oct 2013 11:35:51 +0200 Subject: [PATCH 307/459] ip_tunnel_core: Change __skb_push back to skb_push Git commit 0e6fbc5b ("ip_tunnels: extend iptunnel_xmit()") moved the IP header installation to iptunnel_xmit() and changed skb_push() to __skb_push(). This makes possible bugs hard to track down, so change it back to skb_push(). Cc: Pravin Shelar Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- net/ipv4/ip_tunnel_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/ip_tunnel_core.c b/net/ipv4/ip_tunnel_core.c index d6c856b17fd4..c31e3ad98ef2 100644 --- a/net/ipv4/ip_tunnel_core.c +++ b/net/ipv4/ip_tunnel_core.c @@ -61,7 +61,7 @@ int iptunnel_xmit(struct rtable *rt, struct sk_buff *skb, memset(IPCB(skb), 0, sizeof(*IPCB(skb))); /* Push down and install the IP header. */ - __skb_push(skb, sizeof(struct iphdr)); + skb_push(skb, sizeof(struct iphdr)); skb_reset_network_header(skb); iph = ip_hdr(skb); From cfe4a536927c3186b7e7f9be688e7e0f62bb8ea1 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 1 Oct 2013 11:37:37 +0200 Subject: [PATCH 308/459] ip_tunnel: Remove double unregister of the fallback device When queueing the netdevices for removal, we queue the fallback device twice in ip_tunnel_destroy(). The first time when we queue all netdevices in the namespace and then again explicitly. Fix this by removing the explicit queueing of the fallback device. Bug was introduced when network namespace support was added with commit 6c742e714d8 ("ipip: add x-netns support"). Cc: Nicolas Dichtel Signed-off-by: Steffen Klassert Acked-by: Nicolas Dichtel Signed-off-by: David S. Miller --- net/ipv4/ip_tunnel.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index 895a3535321b..63a6d6d6b875 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -886,8 +886,6 @@ static void ip_tunnel_destroy(struct ip_tunnel_net *itn, struct list_head *head, if (!net_eq(dev_net(t->dev), net)) unregister_netdevice_queue(t->dev, head); } - if (itn->fb_tunnel_dev) - unregister_netdevice_queue(itn->fb_tunnel_dev, head); } void ip_tunnel_delete_net(struct ip_tunnel_net *itn, struct rtnl_link_ops *ops) From 205983c43700ac3a81e7625273a3fa83cd2759b5 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Tue, 1 Oct 2013 18:04:59 +0200 Subject: [PATCH 309/459] sit: allow to use rtnl ops on fb tunnel rtnl ops where introduced by ba3e3f50a0e5 ("sit: advertise tunnel param via rtnl"), but I forget to assign rtnl ops to fb tunnels. Now that it is done, we must remove the explicit call to unregister_netdevice_queue(), because the fallback tunnel is added to the queue in sit_destroy_tunnels() when checking rtnl_link_ops of all netdevices (this is valid since commit 5e6700b3bf98 ("sit: add support of x-netns")). Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- net/ipv6/sit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index afd5605aea7c..19269453a8ea 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -1666,6 +1666,7 @@ static int __net_init sit_init_net(struct net *net) goto err_alloc_dev; } dev_net_set(sitn->fb_tunnel_dev, net); + sitn->fb_tunnel_dev->rtnl_link_ops = &sit_link_ops; /* FB netdevice is special: we have one, and only one per netns. * Allowing to move it to another netns is clearly unsafe. */ @@ -1700,7 +1701,6 @@ static void __net_exit sit_exit_net(struct net *net) rtnl_lock(); sit_destroy_tunnels(sitn, &list); - unregister_netdevice_queue(sitn->fb_tunnel_dev, &list); unregister_netdevice_many(&list); rtnl_unlock(); } From bb8140947a247b9aa15652cc24dc555ebb0b64b0 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Tue, 1 Oct 2013 18:05:00 +0200 Subject: [PATCH 310/459] ip6tnl: allow to use rtnl ops on fb tunnel rtnl ops where introduced by c075b13098b3 ("ip6tnl: advertise tunnel param via rtnl"), but I forget to assign rtnl ops to fb tunnels. Now that it is done, we must remove the explicit call to unregister_netdevice_queue(), because the fallback tunnel is added to the queue in ip6_tnl_destroy_tunnels() when checking rtnl_link_ops of all netdevices (this is valid since commit 0bd8762824e7 ("ip6tnl: add x-netns support")). Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- net/ipv6/ip6_tunnel.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 2d8f4829575b..a791552e0422 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1731,8 +1731,6 @@ static void __net_exit ip6_tnl_destroy_tunnels(struct ip6_tnl_net *ip6n) } } - t = rtnl_dereference(ip6n->tnls_wc[0]); - unregister_netdevice_queue(t->dev, &list); unregister_netdevice_many(&list); } @@ -1752,6 +1750,7 @@ static int __net_init ip6_tnl_init_net(struct net *net) if (!ip6n->fb_tnl_dev) goto err_alloc_dev; dev_net_set(ip6n->fb_tnl_dev, net); + ip6n->fb_tnl_dev->rtnl_link_ops = &ip6_link_ops; /* FB netdevice is special: we have one, and only one per netns. * Allowing to move it to another netns is clearly unsafe. */ From 0eab5eb7a3a9a6ccfcdecbffff00d60a86a004bb Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 1 Oct 2013 09:10:16 -0700 Subject: [PATCH 311/459] pkt_sched: fq: rate limiting improvements FQ rate limiting suffers from two problems, reported by Steinar : 1) FQ enforces a delay when flow quantum is exhausted in order to reduce cpu overhead. But if packets are small, current delay computation is slightly wrong, and observed rates can be too high. Steinar had this problem because he disabled TSO and GSO, and default FQ quantum is 2*1514. (Of course, I wish recent TSO auto sizing changes will help to not having to disable TSO in the first place) 2) maxrate was not used for forwarded flows (skbs not attached to a socket) Tested: tc qdisc add dev eth0 root est 1sec 4sec fq maxrate 8Mbit netperf -H lpq84 -l 1000 & sleep 10 ; tc -s qdisc show dev eth0 qdisc fq 8003: root refcnt 32 limit 10000p flow_limit 100p buckets 1024 quantum 3028 initial_quantum 15140 maxrate 8000Kbit Sent 16819357 bytes 11258 pkt (dropped 0, overlimits 0 requeues 0) rate 7831Kbit 653pps backlog 7570b 5p requeues 0 44 flows (43 inactive, 1 throttled), next packet delay 2977352 ns 0 gc, 0 highprio, 5545 throttled lpq83:~# tcpdump -p -i eth0 host lpq84 -c 12 09:02:52.079484 IP lpq83 > lpq84: . 1389536928:1389538376(1448) ack 3808678021 win 457 09:02:52.079499 IP lpq83 > lpq84: . 1448:2896(1448) ack 1 win 457 09:02:52.079906 IP lpq84 > lpq83: . ack 2896 win 16384 09:02:52.082568 IP lpq83 > lpq84: . 2896:4344(1448) ack 1 win 457 09:02:52.082581 IP lpq83 > lpq84: . 4344:5792(1448) ack 1 win 457 09:02:52.083017 IP lpq84 > lpq83: . ack 5792 win 16384 09:02:52.085678 IP lpq83 > lpq84: . 5792:7240(1448) ack 1 win 457 09:02:52.085693 IP lpq83 > lpq84: . 7240:8688(1448) ack 1 win 457 09:02:52.086117 IP lpq84 > lpq83: . ack 8688 win 16384 09:02:52.088792 IP lpq83 > lpq84: . 8688:10136(1448) ack 1 win 457 09:02:52.088806 IP lpq83 > lpq84: . 10136:11584(1448) ack 1 win 457 09:02:52.089217 IP lpq84 > lpq83: . ack 11584 win 16384 Reported-by: Steinar H. Gunderson Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/sch_fq.c | 43 +++++++++++++++++++++++++------------------ 1 file changed, 25 insertions(+), 18 deletions(-) diff --git a/net/sched/sch_fq.c b/net/sched/sch_fq.c index fc6de56a331e..a2fef8b10b96 100644 --- a/net/sched/sch_fq.c +++ b/net/sched/sch_fq.c @@ -420,6 +420,7 @@ static struct sk_buff *fq_dequeue(struct Qdisc *sch) struct fq_flow_head *head; struct sk_buff *skb; struct fq_flow *f; + u32 rate; skb = fq_dequeue_head(sch, &q->internal); if (skb) @@ -468,28 +469,34 @@ begin: f->time_next_packet = now; f->credit -= qdisc_pkt_len(skb); - if (f->credit <= 0 && - q->rate_enable && - skb->sk && skb->sk->sk_state != TCP_TIME_WAIT) { - u32 rate = skb->sk->sk_pacing_rate ?: q->flow_default_rate; + if (f->credit > 0 || !q->rate_enable) + goto out; + + if (skb->sk && skb->sk->sk_state != TCP_TIME_WAIT) { + rate = skb->sk->sk_pacing_rate ?: q->flow_default_rate; rate = min(rate, q->flow_max_rate); - if (rate) { - u64 len = (u64)qdisc_pkt_len(skb) * NSEC_PER_SEC; + } else { + rate = q->flow_max_rate; + if (rate == ~0U) + goto out; + } + if (rate) { + u32 plen = max(qdisc_pkt_len(skb), q->quantum); + u64 len = (u64)plen * NSEC_PER_SEC; - do_div(len, rate); - /* Since socket rate can change later, - * clamp the delay to 125 ms. - * TODO: maybe segment the too big skb, as in commit - * e43ac79a4bc ("sch_tbf: segment too big GSO packets") - */ - if (unlikely(len > 125 * NSEC_PER_MSEC)) { - len = 125 * NSEC_PER_MSEC; - q->stat_pkts_too_long++; - } - - f->time_next_packet = now + len; + do_div(len, rate); + /* Since socket rate can change later, + * clamp the delay to 125 ms. + * TODO: maybe segment the too big skb, as in commit + * e43ac79a4bc ("sch_tbf: segment too big GSO packets") + */ + if (unlikely(len > 125 * NSEC_PER_MSEC)) { + len = 125 * NSEC_PER_MSEC; + q->stat_pkts_too_long++; } + + f->time_next_packet = now + len; } out: qdisc_bstats_update(sch, skb); From 8553bcad3eca6cdd19c4771c378bd2cf6e25c6b2 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Tue, 17 Sep 2013 14:11:04 -0600 Subject: [PATCH 312/459] bus: mvebu-mbus: Fix optional pcie-mem/io-aperture properties If the property was not specified then the returned resource had a resource_size(..) == 1, rather than 0. The PCI-E driver checks for 0 so it blindly continues on with a corrupted resource. The regression was introduced into v3.12 by: 11be654 PCI: mvebu: Adapt to the new device tree layout Signed-off-by: Jason Gunthorpe Signed-off-by: Jason Cooper --- drivers/bus/mvebu-mbus.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c index 553185318963..2394e9753ef5 100644 --- a/drivers/bus/mvebu-mbus.c +++ b/drivers/bus/mvebu-mbus.c @@ -865,11 +865,13 @@ static void __init mvebu_mbus_get_pcie_resources(struct device_node *np, int ret; /* - * These are optional, so we clear them and they'll - * be zero if they are missing from the DT. + * These are optional, so we make sure that resource_size(x) will + * return 0. */ memset(mem, 0, sizeof(struct resource)); + mem->end = -1; memset(io, 0, sizeof(struct resource)); + io->end = -1; ret = of_property_read_u32_array(np, "pcie-mem-aperture", reg, ARRAY_SIZE(reg)); if (!ret) { From c2d22ecd3cf3c49aeecdc10ffd7af10ec1f7eab6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 1 Oct 2013 13:11:21 -0400 Subject: [PATCH 313/459] fs/super.c: fix lru_list leak for real Freeing ->s_{inode,dentry}_lru in deactivate_locked_super() is wrong; the right place is destroy_super(). As it is, we leak them if sget() decides that new superblock it has allocated (and never shown to anybody) isn't needed and should be freed. Signed-off-by: Al Viro --- fs/super.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/super.c b/fs/super.c index 3a96c9783a8b..0225c20f8770 100644 --- a/fs/super.c +++ b/fs/super.c @@ -264,6 +264,8 @@ out_free_sb: */ static inline void destroy_super(struct super_block *s) { + list_lru_destroy(&s->s_dentry_lru); + list_lru_destroy(&s->s_inode_lru); #ifdef CONFIG_SMP free_percpu(s->s_files); #endif @@ -323,8 +325,6 @@ void deactivate_locked_super(struct super_block *s) /* caches are now gone, we can safely kill the shrinker now */ unregister_shrinker(&s->s_shrink); - list_lru_destroy(&s->s_dentry_lru); - list_lru_destroy(&s->s_inode_lru); put_filesystem(fs); put_super(s); From 671952a2a290a90017c64e75b7dd0343b0d005b4 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 1 Oct 2013 18:11:26 +0300 Subject: [PATCH 314/459] drm/i915: fix rps.vlv_work initialization During driver loading we are initializing rps.vlv_work in valleyview_enable_rps() via the rps.delayed_resume_work delayed work. This is too late since we are using vlv_work already via i915_driver_load()->intel_uncore_sanitize()-> intel_disable_gt_powersave(). This at least leads to the following kernel warning: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Fix this by initialzing vlv_work before we call intel_uncore_sanitize(). The regression was introduced in commit 7dcd2677ea912573d9ed4bcd629b0023b2d11505 Author: Konstantin Khlebnikov Date: Wed Jul 17 10:22:58 2013 +0400 drm/i915: fix long-standing SNB regression in power consumption after resume though there was no good reason to initialize the static vlv_work from another delayed work to begin with (especially since this will happen multiple times). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69397 Tested-by: shui yangwei Signed-off-by: Imre Deak Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index dd176b7296c1..73a8efc65615 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3864,8 +3864,6 @@ static void valleyview_enable_rps(struct drm_device *dev) dev_priv->rps.rpe_delay), dev_priv->rps.rpe_delay); - INIT_DELAYED_WORK(&dev_priv->rps.vlv_work, vlv_rps_timer_work); - valleyview_set_rps(dev_priv->dev, dev_priv->rps.rpe_delay); gen6_enable_rps_interrupts(dev); @@ -5681,5 +5679,7 @@ void intel_pm_init(struct drm_device *dev) INIT_DELAYED_WORK(&dev_priv->rps.delayed_resume_work, intel_gen6_powersave_work); + + INIT_DELAYED_WORK(&dev_priv->rps.vlv_work, vlv_rps_timer_work); } From 1ccf7a1cdafadd02e33e8f3d74370685a0600ec6 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Tue, 1 Oct 2013 10:28:41 -0700 Subject: [PATCH 315/459] intel_pstate: fix no_turbo When sysfs for no_turbo is set, then also some p states in turbo regions are observed. This patch will set IDA Engage bit when no_turbo is set to explicitly disengage turbo. Signed-off-by: Srinivas Pandruvada Acked-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 9733f29ed148..32b3479a2405 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -394,7 +394,10 @@ static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate) trace_cpu_frequency(pstate * 100000, cpu->cpu); cpu->pstate.current_pstate = pstate; - wrmsrl(MSR_IA32_PERF_CTL, pstate << 8); + if (limits.no_turbo) + wrmsrl(MSR_IA32_PERF_CTL, BIT(32) | (pstate << 8)); + else + wrmsrl(MSR_IA32_PERF_CTL, pstate << 8); } From 6585925b62fa4dd2f4aecf634b0f8956577aa981 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 1 Oct 2013 23:02:43 +0200 Subject: [PATCH 316/459] ACPI: Use EXPORT_SYMBOL() for acpi_bus_get_device() Commit caf5c03f (ACPI: Move acpi_bus_get_device() from bus.c to scan.c) caused acpi_bus_get_device() to be exported using EXPORT_SYMBOL_GPL(), but that broke some binary drivers in existence, so revert that change. Reported-by: Peter Hurley Signed-off-by: Rafael J. Wysocki --- drivers/acpi/scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 611ce9061dc5..407ad13cac2f 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -968,7 +968,7 @@ int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device) } return 0; } -EXPORT_SYMBOL_GPL(acpi_bus_get_device); +EXPORT_SYMBOL(acpi_bus_get_device); int acpi_device_add(struct acpi_device *device, void (*release)(struct device *)) From 3e9e01de5ed3fb2810215e2a3b479e7585785ac0 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 18 Sep 2013 12:33:42 -0700 Subject: [PATCH 317/459] target: Fix xop->dbl assignment in target_xcopy_parse_segdesc_02 This patch fixes up an incorrect assignment for xop->dbl within target_xcopy_parse_segdesc_02() code, as reported by Coverity here: http://marc.info/?l=linux-kernel&m=137936416618490&w=2 Reported-by: Dave Jones Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_xcopy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c index 4d22e7d2adca..3da4fd10b9f8 100644 --- a/drivers/target/target_core_xcopy.c +++ b/drivers/target/target_core_xcopy.c @@ -298,8 +298,8 @@ static int target_xcopy_parse_segdesc_02(struct se_cmd *se_cmd, struct xcopy_op (unsigned long long)xop->dst_lba); if (dc != 0) { - xop->dbl = (desc[29] << 16) & 0xff; - xop->dbl |= (desc[30] << 8) & 0xff; + xop->dbl = (desc[29] & 0xff) << 16; + xop->dbl |= (desc[30] & 0xff) << 8; xop->dbl |= desc[31] & 0xff; pr_debug("XCOPY seg desc 0x02: DC=1 w/ dbl: %u\n", xop->dbl); From 0b41d6ca616ddeb3b6c0a80e8770b6f53cd42806 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 18 Sep 2013 12:48:27 -0700 Subject: [PATCH 318/459] ib_srpt: Destroy cm_id before destroying QP. This patch fixes a bug where ib_destroy_cm_id() was incorrectly being called after srpt_destroy_ch_ib() had destroyed the active QP. This would result in the following failed SRP_LOGIN_REQ messages: Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1762bd, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c903009f8f41) Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1758f9, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c903009f8f42) Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff175941, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c90300a3cfb2) Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1) mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9 rejected SRP_LOGIN_REQ because creating a new RDMA channel failed. Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1) mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9 rejected SRP_LOGIN_REQ because creating a new RDMA channel failed. Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1) Reported-by: Navin Ahuja Cc: stable@vger.kernel.org # 3.3+ Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/srpt/ib_srpt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 653ac6bfc57a..9ea7727a2825 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -2358,6 +2358,8 @@ static void srpt_release_channel_work(struct work_struct *w) transport_deregister_session(se_sess); ch->sess = NULL; + ib_destroy_cm_id(ch->cm_id); + srpt_destroy_ch_ib(ch); srpt_free_ioctx_ring((struct srpt_ioctx **)ch->ioctx_ring, @@ -2368,8 +2370,6 @@ static void srpt_release_channel_work(struct work_struct *w) list_del(&ch->list); spin_unlock_irq(&sdev->spinlock); - ib_destroy_cm_id(ch->cm_id); - if (ch->release_done) complete(ch->release_done); From 4a47d3a1ff10e564bf04f27ac14552df64f60cdf Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 23 Sep 2013 11:42:28 -0700 Subject: [PATCH 319/459] vhost/scsi: Use GFP_ATOMIC with percpu_ida_alloc for obtaining tag Fix GFP_KERNEL -> GFP_ATOMIC usage of percpu_ida_alloc() within vhost_scsi_get_tag(), as this code is expected to be called directly from interrupt context. v2 changes: - Handle possible tag < 0 failure with GFP_ATOMIC Acked-by: Michael S. Tsirkin Acked-by: Asias He Cc: Kent Overstreet Signed-off-by: Nicholas Bellinger --- drivers/vhost/scsi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c index 592b31698fc8..ce5221fa393a 100644 --- a/drivers/vhost/scsi.c +++ b/drivers/vhost/scsi.c @@ -728,7 +728,12 @@ vhost_scsi_get_tag(struct vhost_virtqueue *vq, } se_sess = tv_nexus->tvn_se_sess; - tag = percpu_ida_alloc(&se_sess->sess_tag_pool, GFP_KERNEL); + tag = percpu_ida_alloc(&se_sess->sess_tag_pool, GFP_ATOMIC); + if (tag < 0) { + pr_err("Unable to obtain tag for tcm_vhost_cmd\n"); + return ERR_PTR(-ENOMEM); + } + cmd = &((struct tcm_vhost_cmd *)se_sess->sess_cmd_map)[tag]; sg = cmd->tvc_sgl; pages = cmd->tvc_upages; From 8c7f6e9b3321f5ede7f33974cad06db224661a42 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 23 Sep 2013 11:57:38 -0700 Subject: [PATCH 320/459] target: Fall back to vzalloc upon ->sess_cmd_map kzalloc failure This patch changes transport_alloc_session_tags() to fall back to use vzalloc when kzalloc fails for big tag_num that end up generating larger order allocations. Also use is_vmalloc_addr() in transport_alloc_session_tags() failure path, and normal transport_free_session() path to determine when vfree() needs to be called instead of kfree(). v2 changes: - Use __GFP_NOWARN | __GFP_REPEAT for sess_cmd_map kzalloc (mst) Cc: Michael S. Tsirkin Cc: Asias He Cc: Kent Overstreet Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 84747cc1aac0..81e945eefbbd 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -236,17 +236,24 @@ int transport_alloc_session_tags(struct se_session *se_sess, { int rc; - se_sess->sess_cmd_map = kzalloc(tag_num * tag_size, GFP_KERNEL); + se_sess->sess_cmd_map = kzalloc(tag_num * tag_size, + GFP_KERNEL | __GFP_NOWARN | __GFP_REPEAT); if (!se_sess->sess_cmd_map) { - pr_err("Unable to allocate se_sess->sess_cmd_map\n"); - return -ENOMEM; + se_sess->sess_cmd_map = vzalloc(tag_num * tag_size); + if (!se_sess->sess_cmd_map) { + pr_err("Unable to allocate se_sess->sess_cmd_map\n"); + return -ENOMEM; + } } rc = percpu_ida_init(&se_sess->sess_tag_pool, tag_num); if (rc < 0) { pr_err("Unable to init se_sess->sess_tag_pool," " tag_num: %u\n", tag_num); - kfree(se_sess->sess_cmd_map); + if (is_vmalloc_addr(se_sess->sess_cmd_map)) + vfree(se_sess->sess_cmd_map); + else + kfree(se_sess->sess_cmd_map); se_sess->sess_cmd_map = NULL; return -ENOMEM; } @@ -412,7 +419,10 @@ void transport_free_session(struct se_session *se_sess) { if (se_sess->sess_cmd_map) { percpu_ida_destroy(&se_sess->sess_tag_pool); - kfree(se_sess->sess_cmd_map); + if (is_vmalloc_addr(se_sess->sess_cmd_map)) + vfree(se_sess->sess_cmd_map); + else + kfree(se_sess->sess_cmd_map); } kmem_cache_free(se_sess_cache, se_sess); } From e33a29a5ae711162c6b6fefc0a2ef18f4a4254bf Mon Sep 17 00:00:00 2001 From: Tom Gundersen Date: Tue, 1 Oct 2013 18:18:40 +0200 Subject: [PATCH 321/459] x86/simplefb: Fix overflow causing bogus fall-back On my MacBook Air lfb_size is 4M, which makes the bitshit overflow (to 256GB - larger than 32 bits), meaning we fall back to efifb unnecessarily. Cast to u64 to avoid the overflow. Signed-off-by: Tom Gundersen Reviewed-by: David Herrmann Cc: Geert Uytterhoeven Cc: Stephen Warren Cc: Stephen Warren Link: http://lkml.kernel.org/r/1380644320-1026-1-git-send-email-teg@jklm.no Signed-off-by: Ingo Molnar --- arch/x86/kernel/sysfb_simplefb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/sysfb_simplefb.c b/arch/x86/kernel/sysfb_simplefb.c index 22513e96b012..4ebd636b04b8 100644 --- a/arch/x86/kernel/sysfb_simplefb.c +++ b/arch/x86/kernel/sysfb_simplefb.c @@ -72,7 +72,7 @@ __init int create_simplefb(const struct screen_info *si, * the part that is occupied by the framebuffer */ len = mode->height * mode->stride; len = PAGE_ALIGN(len); - if (len > si->lfb_size << 16) { + if (len > (u64)si->lfb_size << 16) { printk(KERN_WARNING "sysfb: VRAM smaller than advertised\n"); return -EINVAL; } From 5596b0b245fb9d2cefb5023b11061050351c1398 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Wed, 2 Oct 2013 15:03:03 +0900 Subject: [PATCH 322/459] MIPS: Fix forgotten preempt_enable() when CPU has inclusive pcaches [ 1.904000] BUG: scheduling while atomic: swapper/1/0x00000002 [ 1.908000] Modules linked in: [ 1.916000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-rc2-lemote-los.git-5318619-dirty #1 [ 1.920000] Stack : 0000000031aac000 ffffffff810d0000 0000000000000052 ffffffff802730a4 0000000000000000 0000000000000001 ffffffff810cdf90 ffffffff810d0000 ffffffff8068b968 ffffffff806f5537 ffffffff810cdf90 980000009f0782e8 0000000000000001 ffffffff80720000 ffffffff806b0000 980000009f078000 980000009f290000 ffffffff805f312c 980000009f05b5d8 ffffffff80233518 980000009f05b5e8 ffffffff80274b7c 980000009f078000 ffffffff8068b968 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 980000009f05b520 0000000000000000 ffffffff805f2f6c 0000000000000000 ffffffff80700000 ffffffff80700000 ffffffff806fc758 ffffffff80700000 ffffffff8020be98 ffffffff806fceb0 ffffffff805f2f6c ... [ 2.028000] Call Trace: [ 2.032000] [] show_stack+0x80/0x98 [ 2.036000] [] __schedule_bug+0x44/0x6c [ 2.040000] [] __schedule+0x518/0x5b0 [ 2.044000] [] schedule_timeout+0x128/0x1f0 [ 2.048000] [] msleep+0x3c/0x60 [ 2.052000] [] do_probe+0x238/0x3a8 [ 2.056000] [] ide_probe_port+0x340/0x7e8 [ 2.060000] [] ide_host_register+0x2d0/0x7a8 [ 2.064000] [] ide_pci_init_two+0x4e4/0x790 [ 2.068000] [] amd74xx_probe+0x148/0x2c8 [ 2.072000] [] pci_device_probe+0xc4/0x130 [ 2.076000] [] driver_probe_device+0x98/0x270 [ 2.080000] [] __driver_attach+0xe0/0xe8 [ 2.084000] [] bus_for_each_dev+0x78/0xe0 [ 2.088000] [] bus_add_driver+0x230/0x310 [ 2.092000] [] driver_register+0x84/0x158 [ 2.096000] [] do_one_initcall+0x104/0x160 Signed-off-by: Yoichi Yuasa Reported-by: Aaro Koskinen Tested-by: Aaro Koskinen Cc: linux-mips@linux-mips.org Cc: Linux Kernel Mailing List Patchwork: https://patchwork.linux-mips.org/patch/5941/ Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 627883bc6d5f..bc6f96fcb529 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -609,6 +609,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size) r4k_blast_scache(); else blast_scache_range(addr, addr + size); + preempt_enable(); __sync(); return; } @@ -650,6 +651,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) */ blast_inv_scache_range(addr, addr + size); } + preempt_enable(); __sync(); return; } From 0f5a24c6602063e014ee48892ebf56093241106e Mon Sep 17 00:00:00 2001 From: Manoj Chourasia Date: Tue, 1 Oct 2013 15:39:00 +0530 Subject: [PATCH 323/459] HID: hidraw: close underlying device at removal of last reader Even though device exist bit is set the underlying HW device should be closed when the last reader of the device is closed i.e. open count drops to zero. Signed-off-by: Manoj Chourasia Reported-by: mika.westerberg@linux.intel.com Tested-by: mika.westerberg@linux.intel.com Signed-off-by: Jiri Kosina --- drivers/hid/hidraw.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 8918dd12bb69..6a6dd5cd7833 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -308,18 +308,25 @@ static int hidraw_fasync(int fd, struct file *file, int on) static void drop_ref(struct hidraw *hidraw, int exists_bit) { if (exists_bit) { - hid_hw_close(hidraw->hid); hidraw->exist = 0; - if (hidraw->open) + if (hidraw->open) { + hid_hw_close(hidraw->hid); wake_up_interruptible(&hidraw->wait); + } } else { --hidraw->open; } - - if (!hidraw->open && !hidraw->exist) { - device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor)); - hidraw_table[hidraw->minor] = NULL; - kfree(hidraw); + if (!hidraw->open) { + if (!hidraw->exist) { + device_destroy(hidraw_class, + MKDEV(hidraw_major, hidraw->minor)); + hidraw_table[hidraw->minor] = NULL; + kfree(hidraw); + } else { + /* close device for last reader */ + hid_hw_power(hidraw->hid, PM_HINT_NORMAL); + hid_hw_close(hidraw->hid); + } } } From 7da7cbbbeb60e0939fecdf9723b388136c175e5c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Anders=20F=2E=20U=2E=20Ki=C3=A6r?= Date: Tue, 1 Oct 2013 19:22:05 +0200 Subject: [PATCH 324/459] HID: add Holtek USB ID 04d9:a081 SHARKOON DarkGlider MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Added id, bindings and comments for Holtek USB ID 04d9:a081 SHARKOON DarkGlider Gaming mouse to use the same corrections of the report descriptor as Holtek 04d9:a04a. As the mouse exceed HID_MAX_USAGES at the same offsets in the reported descriptor. Tested on the hardware. Signed-off-by: Anders F. U. Kiær Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 1 + drivers/hid/hid-core.c | 1 + drivers/hid/hid-holtek-mouse.c | 4 ++++ drivers/hid/hid-ids.h | 1 + 4 files changed, 7 insertions(+) diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 71b70e3a7a71..c91d547191dd 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -241,6 +241,7 @@ config HID_HOLTEK - Sharkoon Drakonia / Perixx MX-2000 gaming mice - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 / Zalman ZM-GM1 + - SHARKOON DarkGlider Gaming mouse config HOLTEK_FF bool "Holtek On Line Grip force feedback support" diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index b8470b1a10fe..5a8c01112a23 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1715,6 +1715,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) }, + { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081) }, { HID_USB_DEVICE(USB_VENDOR_ID_HUION, USB_DEVICE_ID_HUION_580) }, { HID_USB_DEVICE(USB_VENDOR_ID_JESS2, USB_DEVICE_ID_JESS2_COLOR_RUMBLE_PAD) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ION, USB_DEVICE_ID_ICADE) }, diff --git a/drivers/hid/hid-holtek-mouse.c b/drivers/hid/hid-holtek-mouse.c index 7e6db3cf46f9..e696566cde46 100644 --- a/drivers/hid/hid-holtek-mouse.c +++ b/drivers/hid/hid-holtek-mouse.c @@ -27,6 +27,7 @@ * - USB ID 04d9:a067, sold as Sharkoon Drakonia and Perixx MX-2000 * - USB ID 04d9:a04a, sold as Tracer Sniper TRM-503, NOVA Gaming Slider X200 * and Zalman ZM-GM1 + * - USB ID 04d9:a081, sold as SHARKOON DarkGlider Gaming mouse */ static __u8 *holtek_mouse_report_fixup(struct hid_device *hdev, __u8 *rdesc, @@ -46,6 +47,7 @@ static __u8 *holtek_mouse_report_fixup(struct hid_device *hdev, __u8 *rdesc, } break; case USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A: + case USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081: if (*rsize >= 113 && rdesc[106] == 0xff && rdesc[107] == 0x7f && rdesc[111] == 0xff && rdesc[112] == 0x7f) { hid_info(hdev, "Fixing up report descriptor\n"); @@ -63,6 +65,8 @@ static const struct hid_device_id holtek_mouse_devices[] = { USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A) }, + { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, + USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081) }, { } }; MODULE_DEVICE_TABLE(hid, holtek_mouse_devices); diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index e60e8d530697..9cbc7ab07dfa 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -450,6 +450,7 @@ #define USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD 0xa055 #define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067 0xa067 #define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A 0xa04a +#define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081 0xa081 #define USB_VENDOR_ID_IMATION 0x0718 #define USB_DEVICE_ID_DISC_STAKKA 0xd000 From a9d14bc0b188a822e42787d01e56c06fe9750162 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 2 Oct 2013 17:49:50 +0200 Subject: [PATCH 325/459] ALSA: snd-usb-usx2y: remove bogus frame checks The frame check in i_usX2Y_urb_complete() and i_usX2Y_usbpcm_urb_complete() is bogus and produces false positives as described in this LAU thread: http://linuxaudio.org/mailarchive/lau/2013/5/20/200177 This patch removes the check code entirely. Cc: fzu@wemgehoertderstaat.de Reported-by: Dr Nicholas J Bailey Suggested-by: Takashi Iwai Signed-off-by: Daniel Mack Cc: Signed-off-by: Takashi Iwai --- sound/usb/usx2y/usbusx2yaudio.c | 22 +++------------------- sound/usb/usx2y/usx2yhwdeppcm.c | 7 +------ 2 files changed, 4 insertions(+), 25 deletions(-) diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c index 63fb5219f0f8..6234a51625b1 100644 --- a/sound/usb/usx2y/usbusx2yaudio.c +++ b/sound/usb/usx2y/usbusx2yaudio.c @@ -299,19 +299,6 @@ static void usX2Y_error_urb_status(struct usX2Ydev *usX2Y, usX2Y_clients_stop(usX2Y); } -static void usX2Y_error_sequence(struct usX2Ydev *usX2Y, - struct snd_usX2Y_substream *subs, struct urb *urb) -{ - snd_printk(KERN_ERR -"Sequence Error!(hcd_frame=%i ep=%i%s;wait=%i,frame=%i).\n" -"Most probably some urb of usb-frame %i is still missing.\n" -"Cause could be too long delays in usb-hcd interrupt handling.\n", - usb_get_current_frame_number(usX2Y->dev), - subs->endpoint, usb_pipein(urb->pipe) ? "in" : "out", - usX2Y->wait_iso_frame, urb->start_frame, usX2Y->wait_iso_frame); - usX2Y_clients_stop(usX2Y); -} - static void i_usX2Y_urb_complete(struct urb *urb) { struct snd_usX2Y_substream *subs = urb->context; @@ -328,12 +315,9 @@ static void i_usX2Y_urb_complete(struct urb *urb) usX2Y_error_urb_status(usX2Y, subs, urb); return; } - if (likely((urb->start_frame & 0xFFFF) == (usX2Y->wait_iso_frame & 0xFFFF))) - subs->completed_urb = urb; - else { - usX2Y_error_sequence(usX2Y, subs, urb); - return; - } + + subs->completed_urb = urb; + { struct snd_usX2Y_substream *capsubs = usX2Y->subs[SNDRV_PCM_STREAM_CAPTURE], *playbacksubs = usX2Y->subs[SNDRV_PCM_STREAM_PLAYBACK]; diff --git a/sound/usb/usx2y/usx2yhwdeppcm.c b/sound/usb/usx2y/usx2yhwdeppcm.c index f2a1acdc4d83..814d0e887c62 100644 --- a/sound/usb/usx2y/usx2yhwdeppcm.c +++ b/sound/usb/usx2y/usx2yhwdeppcm.c @@ -244,13 +244,8 @@ static void i_usX2Y_usbpcm_urb_complete(struct urb *urb) usX2Y_error_urb_status(usX2Y, subs, urb); return; } - if (likely((urb->start_frame & 0xFFFF) == (usX2Y->wait_iso_frame & 0xFFFF))) - subs->completed_urb = urb; - else { - usX2Y_error_sequence(usX2Y, subs, urb); - return; - } + subs->completed_urb = urb; capsubs = usX2Y->subs[SNDRV_PCM_STREAM_CAPTURE]; capsubs2 = usX2Y->subs[SNDRV_PCM_STREAM_CAPTURE + 2]; playbacksubs = usX2Y->subs[SNDRV_PCM_STREAM_PLAYBACK]; From 09d3ce74d7d60f37d1b030886ec659bbfe2e73bf Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 1 Oct 2013 21:48:43 +0100 Subject: [PATCH 326/459] arm64: Remove duplicate DEBUG_STACK_USAGE config This config item already exists generically in lib/Kconfig.debug. Remove the duplicate config in arm64. Signed-off-by: Stephen Boyd Signed-off-by: Catalin Marinas --- arch/arm64/Kconfig.debug | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug index 1a6bfe954d49..835c559786bd 100644 --- a/arch/arm64/Kconfig.debug +++ b/arch/arm64/Kconfig.debug @@ -6,13 +6,6 @@ config FRAME_POINTER bool default y -config DEBUG_STACK_USAGE - bool "Enable stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T output. - config EARLY_PRINTK bool "Early printk support" default y From 19514fc665ffbce624785f76ee7ad0ea6378a527 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 17 Jul 2013 18:05:06 +0200 Subject: [PATCH 327/459] arm, kbuild: make "make install" not depend on vmlinux Install targets (install, zinstall, uinstall) on arm have a dependency to vmlinux. This may cause parts of the kernel to be rebuilt during installation. We must avoid this since this may run as root. Install targets "ABSOLUTELY MUST NOT MODIFY THE SOURCE TREE." as Linus emphasized this in: http://lkml.org/lkml/2013/7/10/600 So on arm and maybe other archs we need the same as for x86: 1648e4f8 x86, kbuild: make "make install" not depend on vmlinux This patch fixes this for arm. Dependencies are removed and instead a check to install.sh is added for the files that are needed. This issue was uncovered by this build error where the -j option is used in conjunction with install targets: $ make $ make zinstall ... DEPMOD Usage: .../scripts/depmod.sh /sbin/depmod (INSTALL_MOD_PATH and INSTALL_PATH variables set, so no root perms required in this case.) The problem is that zinstall on arm due to its dependency to vmlinux does a prepare/prepare3 and finally does a forced rewrite of kernel.release even if it exists already. Rebuilding kernel.release removes it first and then recreates it. This might race with another parallel make job running depmod. So this patch should fix this one too. Also quoting $(KERNELRELEASE) arg for install.sh as this messes argument order in case it is empty (which is the case if the kernel was not built yet). Signed-off-by: Robert Richter Signed-off-by: Robert Richter Acked-by: Michal Marek . Acked-by: Linus Torvalds Signed-off-by: "Yann E. MORIN" Signed-off-by: Michal Marek --- arch/arm/Makefile | 9 +++++++-- arch/arm/boot/Makefile | 16 ++++++++-------- arch/arm/boot/install.sh | 14 ++++++++++++++ 3 files changed, 29 insertions(+), 10 deletions(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index a37a50f575a2..db50b626be98 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -296,10 +296,15 @@ archprepare: # Convert bzImage to zImage bzImage: zImage -zImage Image xipImage bootpImage uImage: vmlinux +BOOT_TARGETS = zImage Image xipImage bootpImage uImage +INSTALL_TARGETS = zinstall uinstall install + +PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS) + +$(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ -zinstall uinstall install: vmlinux +$(INSTALL_TARGETS): $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ %.dtb: | scripts diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 84aa2caf07ed..ec2f8065f955 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -95,24 +95,24 @@ initrd: @test "$(INITRD)" != "" || \ (echo You must specify INITRD; exit -1) -install: $(obj)/Image - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ +install: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ $(obj)/Image System.map "$(INSTALL_PATH)" -zinstall: $(obj)/zImage - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ +zinstall: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ $(obj)/zImage System.map "$(INSTALL_PATH)" -uinstall: $(obj)/uImage - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ +uinstall: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ $(obj)/uImage System.map "$(INSTALL_PATH)" zi: - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ $(obj)/zImage System.map "$(INSTALL_PATH)" i: - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ $(obj)/Image System.map "$(INSTALL_PATH)" subdir- := bootp compressed dts diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh index 06ea7d42ce8e..2a45092a40e3 100644 --- a/arch/arm/boot/install.sh +++ b/arch/arm/boot/install.sh @@ -20,6 +20,20 @@ # $4 - default install path (blank if root directory) # +verify () { + if [ ! -f "$1" ]; then + echo "" 1>&2 + echo " *** Missing file: $1" 1>&2 + echo ' *** You need to run "make" before "make install".' 1>&2 + echo "" 1>&2 + exit 1 + fi +} + +# Make sure the files actually exist +verify "$2" +verify "$3" + # User may have a custom install script if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi From 20928bd3f08afb036c096d9559d581926b895918 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 1 Oct 2013 22:13:34 -0700 Subject: [PATCH 328/459] sparc: fix ldom_reboot buffer overflow harder The length argument to strlcpy was still wrong. It could overflow the end of full_boot_str by 5 bytes. Instead of strcat and strlcpy, just use snprint. Reported-by: Brad Spengler Signed-off-by: Kees Cook Signed-off-by: David S. Miller --- arch/sparc/kernel/ds.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c index 4d9ac8406f32..dff60abbea01 100644 --- a/arch/sparc/kernel/ds.c +++ b/arch/sparc/kernel/ds.c @@ -849,9 +849,8 @@ void ldom_reboot(const char *boot_command) if (boot_command && strlen(boot_command)) { unsigned long len; - strcpy(full_boot_str, "boot "); - strlcpy(full_boot_str + strlen("boot "), boot_command, - sizeof(full_boot_str)); + snprintf(full_boot_str, sizeof(full_boot_str), "boot %s", + boot_command); len = strlen(full_boot_str); if (reboot_data_supported) { From 26794942461f438a6bc725ec7294b08a6bd782c4 Mon Sep 17 00:00:00 2001 From: David Miller Date: Wed, 2 Oct 2013 14:25:09 -0400 Subject: [PATCH 329/459] mm: Fix generic hugetlb pte check return type. The include/asm-generic/hugetlb.h stubs that just vector huge_pte_*() calls to the pte_*() implementations won't work in certain situations. x86 and sparc, for example, return "unsigned long" from the bit checks, and just go "return pte_val(pte) & PTE_BIT_FOO;" But since huge_pte_*() returns 'int', if any high bits on 64-bit are relevant, they get chopped off. The net effect is that we can loop forever trying to COW a huge page, because the huge_pte_write() check signals false all the time. Reported-by: Gurudas Pai Tested-by: Gurudas Pai Signed-off-by: David S. Miller Acked-by: David Rientjes --- include/asm-generic/hugetlb.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-generic/hugetlb.h b/include/asm-generic/hugetlb.h index d06079c774a0..99b490b4d05a 100644 --- a/include/asm-generic/hugetlb.h +++ b/include/asm-generic/hugetlb.h @@ -6,12 +6,12 @@ static inline pte_t mk_huge_pte(struct page *page, pgprot_t pgprot) return mk_pte(page, pgprot); } -static inline int huge_pte_write(pte_t pte) +static inline unsigned long huge_pte_write(pte_t pte) { return pte_write(pte); } -static inline int huge_pte_dirty(pte_t pte) +static inline unsigned long huge_pte_dirty(pte_t pte) { return pte_dirty(pte); } From d2f09b1c17158fa870fb4f78babf1b307cd2685b Mon Sep 17 00:00:00 2001 From: Michael Opdenacker Date: Sat, 7 Sep 2013 09:38:09 +0200 Subject: [PATCH 330/459] sparc: remove deprecated IRQF_DISABLED This patch proposes to remove the IRQF_DISABLED flag from sparc architecture code. It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker Signed-off-by: David S. Miller --- arch/sparc/include/asm/floppy_64.h | 2 +- arch/sparc/kernel/ldc.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sparc/include/asm/floppy_64.h b/arch/sparc/include/asm/floppy_64.h index e204f902e6c9..7c90c50c200d 100644 --- a/arch/sparc/include/asm/floppy_64.h +++ b/arch/sparc/include/asm/floppy_64.h @@ -254,7 +254,7 @@ static int sun_fd_request_irq(void) once = 1; error = request_irq(FLOPPY_IRQ, sparc_floppy_irq, - IRQF_DISABLED, "floppy", NULL); + 0, "floppy", NULL); return ((error == 0) ? 0 : -1); } diff --git a/arch/sparc/kernel/ldc.c b/arch/sparc/kernel/ldc.c index 54df554b82d9..e01d75d40329 100644 --- a/arch/sparc/kernel/ldc.c +++ b/arch/sparc/kernel/ldc.c @@ -1249,12 +1249,12 @@ int ldc_bind(struct ldc_channel *lp, const char *name) snprintf(lp->rx_irq_name, LDC_IRQ_NAME_MAX, "%s RX", name); snprintf(lp->tx_irq_name, LDC_IRQ_NAME_MAX, "%s TX", name); - err = request_irq(lp->cfg.rx_irq, ldc_rx, IRQF_DISABLED, + err = request_irq(lp->cfg.rx_irq, ldc_rx, 0, lp->rx_irq_name, lp); if (err) return err; - err = request_irq(lp->cfg.tx_irq, ldc_tx, IRQF_DISABLED, + err = request_irq(lp->cfg.tx_irq, ldc_tx, 0, lp->tx_irq_name, lp); if (err) { free_irq(lp->cfg.rx_irq, lp); From a988fb806d72d4e3a0edbeaece3f2f1172ce44b8 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 11 Sep 2013 12:32:05 +0200 Subject: [PATCH 331/459] sparc: fix MSI build failure on Sparc32 Commit ebd97be635 ('PCI: remove ARCH_SUPPORTS_MSI kconfig option') removes the ARCH_SUPPORTS_MSI Kconfig option that allowed architectures to indicate whether they support PCI MSI or not. Now, PCI MSI support can be compiled in on any architecture thanks to the use of weak functions thanks to 4287d824f265 ('PCI: use weak functions for MSI arch-specific functions'). So, architecture specific code is now responsible to ensure that its PCI MSI code builds in all cases, or be appropriately conditionally compiled. On Sparc, the MSI support is only provided for Sparc64, so the ARCH_SUPPORTS_MSI kconfig option was only selected for SPARC64, and not for the Sparc architecture as a whole. Therefore, removing ARCH_SUPPORTS_MSI broke Sparc32 configurations with CONFIG_PCI_MSI=y, because the Sparc-specific MSI code is not designed to be built on Sparc32. To solve this, this commit ensures that the Sparc MSI code is only built on Sparc64. This is done thanks to a new Kconfig Makefile helper option SPARC64_PCI_MSI, modeled after the existing SPARC64_PCI. The SPARC64_PCI_MSI option is an hidden option that is true when both Sparc64 PCI support is enabled and MSI is enabled. The arch/sparc/kernel/pci_msi.c file is now only built when SPARC64_PCI_MSI is true. Signed-off-by: Thomas Petazzoni Reported-by: Guenter Roeck Tested-by: Guenter Roeck Signed-off-by: David S. Miller --- arch/sparc/Kconfig | 7 ++++++- arch/sparc/kernel/Makefile | 3 ++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 2137ad667438..78c4fdb91bc5 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -506,12 +506,17 @@ config SUN_OPENPROMFS Only choose N if you know in advance that you will not need to modify OpenPROM settings on the running system. -# Makefile helper +# Makefile helpers config SPARC64_PCI bool default y depends on SPARC64 && PCI +config SPARC64_PCI_MSI + bool + default y + depends on SPARC64_PCI && PCI_MSI + endmenu menu "Executable file formats" diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index d432fb20358e..d15cc1794b0e 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -1,3 +1,4 @@ + # # Makefile for the linux kernel. # @@ -99,7 +100,7 @@ obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_SPARC64_PCI) += pci.o pci_common.o psycho_common.o obj-$(CONFIG_SPARC64_PCI) += pci_psycho.o pci_sabre.o pci_schizo.o obj-$(CONFIG_SPARC64_PCI) += pci_sun4v.o pci_sun4v_asm.o pci_fire.o -obj-$(CONFIG_PCI_MSI) += pci_msi.o +obj-$(CONFIG_SPARC64_PCI_MSI) += pci_msi.o obj-$(CONFIG_COMPAT) += sys32.o sys_sparc32.o signal32.o From 4f76d37cdb6523ad42ba666f0e5560e26b4c3749 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 29 Sep 2013 17:34:45 -0700 Subject: [PATCH 332/459] ARM: multi_v7_defconfig: add SDHCI for i.MX Turn on SDHCI for i.MX support so machines can boot with local rootfs on SD. Tested on a Wandboard Quad. Signed-off-by: Olof Johansson Reviewed-by: Fabio Estevam --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index f3935b46df29..119fc378fc52 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -135,6 +135,7 @@ CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_SPEAR=y CONFIG_MMC_OMAP=y From 10469350e345599dfef3fa78a7c19fb230e674c1 Mon Sep 17 00:00:00 2001 From: Christian Ruppert Date: Wed, 2 Oct 2013 11:13:38 +0200 Subject: [PATCH 333/459] ARC: Fix signal frame management for SA_SIGINFO Previously, when a signal was registered with SA_SIGINFO, parameters 2 and 3 of the signal handler were written to registers r1 and r2 before the register set was saved. This led to corruption of these two registers after returning from the signal handler (the wrong values were restored). With this patch, registers are now saved before any parameters are passed, thus maintaining the processor state from before signal entry. Signed-off-by: Christian Ruppert Signed-off-by: Vineet Gupta --- arch/arc/kernel/signal.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c index ee6ef2f60a28..7e95e1a86510 100644 --- a/arch/arc/kernel/signal.c +++ b/arch/arc/kernel/signal.c @@ -101,7 +101,6 @@ SYSCALL_DEFINE0(rt_sigreturn) { struct rt_sigframe __user *sf; unsigned int magic; - int err; struct pt_regs *regs = current_pt_regs(); /* Always make any pending restarted system calls return -EINTR */ @@ -119,15 +118,16 @@ SYSCALL_DEFINE0(rt_sigreturn) if (!access_ok(VERIFY_READ, sf, sizeof(*sf))) goto badframe; - err = restore_usr_regs(regs, sf); - err |= __get_user(magic, &sf->sigret_magic); - if (err) + if (__get_user(magic, &sf->sigret_magic)) goto badframe; if (unlikely(is_do_ss_needed(magic))) if (restore_altstack(&sf->uc.uc_stack)) goto badframe; + if (restore_usr_regs(regs, sf)) + goto badframe; + /* Don't restart from sigreturn */ syscall_wont_restart(regs); @@ -190,6 +190,15 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info, if (!sf) return 1; + /* + * w/o SA_SIGINFO, struct ucontext is partially populated (only + * uc_mcontext/uc_sigmask) for kernel's normal user state preservation + * during signal handler execution. This works for SA_SIGINFO as well + * although the semantics are now overloaded (the same reg state can be + * inspected by userland: but are they allowed to fiddle with it ? + */ + err |= stash_usr_regs(sf, regs, set); + /* * SA_SIGINFO requires 3 args to signal handler: * #1: sig-no (common to any handler) @@ -213,14 +222,6 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info, magic = MAGIC_SIGALTSTK; } - /* - * w/o SA_SIGINFO, struct ucontext is partially populated (only - * uc_mcontext/uc_sigmask) for kernel's normal user state preservation - * during signal handler execution. This works for SA_SIGINFO as well - * although the semantics are now overloaded (the same reg state can be - * inspected by userland: but are they allowed to fiddle with it ? - */ - err |= stash_usr_regs(sf, regs, set); err |= __put_user(magic, &sf->sigret_magic); if (err) return err; From 29d274b8d3e2404cd1832b3a999b12f9d1e1d895 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Wed, 2 Oct 2013 16:41:04 +0200 Subject: [PATCH 334/459] x86/simplefb: Mark framebuffer mem-resources as IORESOURCE_BUSY to avoid bootup warning IORESOURCE_BUSY is used to mark temporary driver mem-resources instead of global regions. This suppresses warnings if regions overlap with a region marked as BUSY. This was always the case for VESA/VGA/EFI framebuffer regions so do the same for simplefb regions. The reason we do this is to allow device handover to real GPU drivers like i915/radeon/nouveau which get the same regions via PCI BARs. Maybe at some point we will be able to unregister platform devices properly during the handover. In this case the simplefb region would get removed before the new region is created. However, this is currently not the case and would require rather huge changes in remove_conflicting_framebuffers(). Add the BUSY marker now and try to eventually rewrite the handover for a next release. Also see kernel/resource.c for more information: /* * if a resource is "BUSY", it's not a hardware resource * but a driver mapping of such a resource; we don't want * to warn for those; some drivers legitimately map only * partial hardware resources. (example: vesafb) */ This suppresses warnings like: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 199 at arch/x86/mm/ioremap.c:171 __ioremap_caller+0x2e3/0x390() Info: mapping multiple BARs. Your kernel is fine. Call Trace: dump_stack+0x54/0x8d warn_slowpath_common+0x7d/0xa0 warn_slowpath_fmt+0x4c/0x50 iomem_map_sanity_check+0xac/0xe0 __ioremap_caller+0x2e3/0x390 ioremap_wc+0x32/0x40 i915_driver_load+0x670/0xf50 [i915] ... Reported-by: Tom Gundersen Tested-by: Tom Gundersen Tested-by: Pavel Roskin Signed-off-by: David Herrmann Link: http://lkml.kernel.org/r/1380724864-1757-1-git-send-email-dh.herrmann@gmail.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/sysfb_simplefb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/sysfb_simplefb.c b/arch/x86/kernel/sysfb_simplefb.c index 4ebd636b04b8..86179d409893 100644 --- a/arch/x86/kernel/sysfb_simplefb.c +++ b/arch/x86/kernel/sysfb_simplefb.c @@ -79,7 +79,7 @@ __init int create_simplefb(const struct screen_info *si, /* setup IORESOURCE_MEM as framebuffer memory */ memset(&res, 0, sizeof(res)); - res.flags = IORESOURCE_MEM; + res.flags = IORESOURCE_MEM | IORESOURCE_BUSY; res.name = simplefb_resname; res.start = si->lfb_base; res.end = si->lfb_base + len - 1; From a2ac07fe292ea41296049dfdbfeed203e2467ee7 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Tue, 1 Oct 2013 19:58:36 +0300 Subject: [PATCH 335/459] Fix NULL dereference in gfn_to_hva_prot() gfn_to_memslot() can return NULL or invalid slot. We need to check slot validity before accessing it. Reviewed-by: Paolo Bonzini Signed-off-by: Gleb Natapov --- virt/kvm/kvm_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 979bff485fb0..a9dd682cf5e3 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -1064,10 +1064,12 @@ EXPORT_SYMBOL_GPL(gfn_to_hva); unsigned long gfn_to_hva_prot(struct kvm *kvm, gfn_t gfn, bool *writable) { struct kvm_memory_slot *slot = gfn_to_memslot(kvm, gfn); - if (writable) + unsigned long hva = __gfn_to_hva_many(slot, gfn, NULL, false); + + if (!kvm_is_error_hva(hva) && writable) *writable = !memslot_is_readonly(slot); - return __gfn_to_hva_many(gfn_to_memslot(kvm, gfn), gfn, NULL, false); + return hva; } static int kvm_read_hva(void *data, void __user *hva, int len) From f7e3334a6bcb42e7295a9bd9cb36ca4e6e4e66b4 Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Fri, 27 Sep 2013 10:18:09 -0500 Subject: [PATCH 336/459] powerpc: Fix memory hotplug with sparse vmemmap Previous commit 46723bfa540... introduced a new config option HAVE_BOOTMEM_INFO_NODE that ended up breaking memory hot-remove for ppc when sparse vmemmap is not defined. This patch defines HAVE_BOOTMEM_INFO_NODE for ppc and adds the call to register_page_bootmem_info_node. Without this we get a BUG_ON for memory hot remove in put_page_bootmem(). This also adds a stub for register_page_bootmem_memmap to allow ppc to build with sparse vmemmap defined. Leaving this as a stub is fine since the same vmemmap addresses are also handled in vmemmap_populate and as such are properly mapped. Signed-off-by: Nathan Fontenot Signed-off-by: Benjamin Herrenschmidt CC: [v3.9+] --- arch/powerpc/mm/init_64.c | 4 ++++ arch/powerpc/mm/mem.c | 9 +++++++++ mm/Kconfig | 2 +- 3 files changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index d0cd9e4c6837..8ed035d2edb5 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -300,5 +300,9 @@ void vmemmap_free(unsigned long start, unsigned long end) { } +void register_page_bootmem_memmap(unsigned long section_nr, + struct page *start_page, unsigned long size) +{ +} #endif /* CONFIG_SPARSEMEM_VMEMMAP */ diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 1cf9c5b67f24..3fa93dc7fe75 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -297,12 +297,21 @@ void __init paging_init(void) } #endif /* ! CONFIG_NEED_MULTIPLE_NODES */ +static void __init register_page_bootmem_info(void) +{ + int i; + + for_each_online_node(i) + register_page_bootmem_info_node(NODE_DATA(i)); +} + void __init mem_init(void) { #ifdef CONFIG_SWIOTLB swiotlb_init(0); #endif + register_page_bootmem_info(); high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); set_max_mapnr(max_pfn); free_all_bootmem(); diff --git a/mm/Kconfig b/mm/Kconfig index 026771a9b097..394838f489eb 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -183,7 +183,7 @@ config MEMORY_HOTPLUG_SPARSE config MEMORY_HOTREMOVE bool "Allow for memory hot remove" select MEMORY_ISOLATION - select HAVE_BOOTMEM_INFO_NODE if X86_64 + select HAVE_BOOTMEM_INFO_NODE if (X86_64 || PPC64) depends on MEMORY_HOTPLUG && ARCH_ENABLE_MEMORY_HOTREMOVE depends on MIGRATION From d9813c3681a36774b254c0cdc9cce53c9e22c756 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 1 Oct 2013 16:54:05 +1000 Subject: [PATCH 337/459] powerpc: Fix parameter clobber in csum_partial_copy_generic() The csum_partial_copy_generic() uses register r7 to adjust the remaining bytes to process. Unfortunately, r7 also holds a parameter, namely the address of the flag to set in case of access exceptions while reading the source buffer. Lacking a quantum implementation of PowerPC, this commit instead uses register r9 to do the adjusting, leaving r7's pointer uncorrupted. Signed-off-by: Paul E. McKenney Signed-off-by: Anton Blanchard Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/checksum_64.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/lib/checksum_64.S b/arch/powerpc/lib/checksum_64.S index 167f72555d60..609665aede75 100644 --- a/arch/powerpc/lib/checksum_64.S +++ b/arch/powerpc/lib/checksum_64.S @@ -269,8 +269,8 @@ _GLOBAL(csum_partial_copy_generic) rldicl. r6,r3,64-1,64-2 /* r6 = (r3 & 0x3) >> 1 */ beq .Lcopy_aligned - li r7,4 - sub r6,r7,r6 + li r9,4 + sub r6,r9,r6 mtctr r6 1: From 8f21bd0090052e740944f9397e2be5ac7957ded7 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 1 Oct 2013 17:11:35 +1000 Subject: [PATCH 338/459] powerpc: Restore registers on error exit from csum_partial_copy_generic() The csum_partial_copy_generic() function saves the PowerPC non-volatile r14, r15, and r16 registers for the main checksum-and-copy loop. Unfortunately, it fails to restore them upon error exit from this loop, which results in silent corruption of these registers in the presumably rare event of an access exception within that loop. This commit therefore restores these register on error exit from the loop. Signed-off-by: Paul E. McKenney Signed-off-by: Anton Blanchard Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/checksum_64.S | 54 +++++++++++++++++++++++++--------- 1 file changed, 40 insertions(+), 14 deletions(-) diff --git a/arch/powerpc/lib/checksum_64.S b/arch/powerpc/lib/checksum_64.S index 609665aede75..57a072065057 100644 --- a/arch/powerpc/lib/checksum_64.S +++ b/arch/powerpc/lib/checksum_64.S @@ -226,19 +226,35 @@ _GLOBAL(csum_partial) blr - .macro source + .macro srcnr 100: .section __ex_table,"a" .align 3 - .llong 100b,.Lsrc_error + .llong 100b,.Lsrc_error_nr + .previous + .endm + + .macro source +150: + .section __ex_table,"a" + .align 3 + .llong 150b,.Lsrc_error + .previous + .endm + + .macro dstnr +200: + .section __ex_table,"a" + .align 3 + .llong 200b,.Ldest_error_nr .previous .endm .macro dest -200: +250: .section __ex_table,"a" .align 3 - .llong 200b,.Ldest_error + .llong 250b,.Ldest_error .previous .endm @@ -274,11 +290,11 @@ _GLOBAL(csum_partial_copy_generic) mtctr r6 1: -source; lhz r6,0(r3) /* align to doubleword */ +srcnr; lhz r6,0(r3) /* align to doubleword */ subi r5,r5,2 addi r3,r3,2 adde r0,r0,r6 -dest; sth r6,0(r4) +dstnr; sth r6,0(r4) addi r4,r4,2 bdnz 1b @@ -392,10 +408,10 @@ dest; std r16,56(r4) mtctr r6 3: -source; ld r6,0(r3) +srcnr; ld r6,0(r3) addi r3,r3,8 adde r0,r0,r6 -dest; std r6,0(r4) +dstnr; std r6,0(r4) addi r4,r4,8 bdnz 3b @@ -405,10 +421,10 @@ dest; std r6,0(r4) srdi. r6,r5,2 beq .Lcopy_tail_halfword -source; lwz r6,0(r3) +srcnr; lwz r6,0(r3) addi r3,r3,4 adde r0,r0,r6 -dest; stw r6,0(r4) +dstnr; stw r6,0(r4) addi r4,r4,4 subi r5,r5,4 @@ -416,10 +432,10 @@ dest; stw r6,0(r4) srdi. r6,r5,1 beq .Lcopy_tail_byte -source; lhz r6,0(r3) +srcnr; lhz r6,0(r3) addi r3,r3,2 adde r0,r0,r6 -dest; sth r6,0(r4) +dstnr; sth r6,0(r4) addi r4,r4,2 subi r5,r5,2 @@ -427,10 +443,10 @@ dest; sth r6,0(r4) andi. r6,r5,1 beq .Lcopy_finish -source; lbz r6,0(r3) +srcnr; lbz r6,0(r3) sldi r9,r6,8 /* Pad the byte out to 16 bits */ adde r0,r0,r9 -dest; stb r6,0(r4) +dstnr; stb r6,0(r4) .Lcopy_finish: addze r0,r0 /* add in final carry */ @@ -440,6 +456,11 @@ dest; stb r6,0(r4) blr .Lsrc_error: + ld r14,STK_REG(R14)(r1) + ld r15,STK_REG(R15)(r1) + ld r16,STK_REG(R16)(r1) + addi r1,r1,STACKFRAMESIZE +.Lsrc_error_nr: cmpdi 0,r7,0 beqlr li r6,-EFAULT @@ -447,6 +468,11 @@ dest; stb r6,0(r4) blr .Ldest_error: + ld r14,STK_REG(R14)(r1) + ld r15,STK_REG(R15)(r1) + ld r16,STK_REG(R16)(r1) + addi r1,r1,STACKFRAMESIZE +.Ldest_error_nr: cmpdi 0,r8,0 beqlr li r6,-EFAULT From d1211af3049f4c9c1d8d4eb8f8098cc4f4f0d0c7 Mon Sep 17 00:00:00 2001 From: Madhavan Srinivasan Date: Wed, 2 Oct 2013 00:34:10 +0530 Subject: [PATCH 339/459] powerpc/sysfs: Disable writing to PURR in guest mode arch/powerpc/kernel/sysfs.c exports PURR with write permission. This may be valid for kernel in phyp mode. But writing to the file in guest mode causes crash due to a priviledge violation Signed-off-by: Madhavan Srinivasan Signed-off-by: Benjamin Herrenschmidt CC: --- arch/powerpc/kernel/sysfs.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 27a90b99ef67..b4e667663d9b 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -17,6 +17,7 @@ #include #include #include +#include #include "cacheinfo.h" @@ -179,15 +180,25 @@ SYSFS_PMCSETUP(spurr, SPRN_SPURR); SYSFS_PMCSETUP(dscr, SPRN_DSCR); SYSFS_PMCSETUP(pir, SPRN_PIR); +/* + Lets only enable read for phyp resources and + enable write when needed with a separate function. + Lets be conservative and default to pseries. +*/ static DEVICE_ATTR(mmcra, 0600, show_mmcra, store_mmcra); static DEVICE_ATTR(spurr, 0400, show_spurr, NULL); static DEVICE_ATTR(dscr, 0600, show_dscr, store_dscr); -static DEVICE_ATTR(purr, 0600, show_purr, store_purr); +static DEVICE_ATTR(purr, 0400, show_purr, store_purr); static DEVICE_ATTR(pir, 0400, show_pir, NULL); unsigned long dscr_default = 0; EXPORT_SYMBOL(dscr_default); +static void add_write_permission_dev_attr(struct device_attribute *attr) +{ + attr->attr.mode |= 0200; +} + static ssize_t show_dscr_default(struct device *dev, struct device_attribute *attr, char *buf) { @@ -394,8 +405,11 @@ static void register_cpu_online(unsigned int cpu) if (cpu_has_feature(CPU_FTR_MMCRA)) device_create_file(s, &dev_attr_mmcra); - if (cpu_has_feature(CPU_FTR_PURR)) + if (cpu_has_feature(CPU_FTR_PURR)) { + if (!firmware_has_feature(FW_FEATURE_LPAR)) + add_write_permission_dev_attr(&dev_attr_purr); device_create_file(s, &dev_attr_purr); + } if (cpu_has_feature(CPU_FTR_SPURR)) device_create_file(s, &dev_attr_spurr); From 1cf389df090194a0976dc867b7fffe99d9d490cb Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Tue, 1 Oct 2013 14:04:53 -0700 Subject: [PATCH 340/459] powerpc/iommu: Use GFP_KERNEL instead of GFP_ATOMIC in iommu_init_table() Under heavy (DLPAR?) stress, we tripped this panic() in arch/powerpc/kernel/iommu.c::iommu_init_table(): page = alloc_pages_node(nid, GFP_ATOMIC, get_order(sz)); if (!page) panic("iommu_init_table: Can't allocate %ld bytes\n", sz); Before the panic() we got a page allocation failure for an order-2 allocation. There appears to be memory free, but perhaps not in the ATOMIC context. I looked through all the call-sites of iommu_init_table() and didn't see any obvious reason to need an ATOMIC allocation. Most call-sites in fact have an explicit GFP_KERNEL allocation shortly before the call to iommu_init_table(), indicating we are not in an atomic context. There is some indirection for some paths, but I didn't see any locks indicating that GFP_KERNEL is inappropriate. With this change under the same conditions, we have not been able to reproduce the panic. Signed-off-by: Nishanth Aravamudan Signed-off-by: Benjamin Herrenschmidt CC: --- arch/powerpc/kernel/iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 0adab06ce5c0..572bb5b95f35 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -661,7 +661,7 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid) /* number of bytes needed for the bitmap */ sz = BITS_TO_LONGS(tbl->it_size) * sizeof(unsigned long); - page = alloc_pages_node(nid, GFP_ATOMIC, get_order(sz)); + page = alloc_pages_node(nid, GFP_KERNEL, get_order(sz)); if (!page) panic("iommu_init_table: Can't allocate %ld bytes\n", sz); tbl->it_map = page_address(page); From e82b89a6f19bae73fb064d1b3dd91fcefbb478f4 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Mon, 23 Sep 2013 09:33:36 -0400 Subject: [PATCH 341/459] powerpc/vio: Fix modalias_show return values modalias_show() should return an empty string on error, not -ENODEV. This causes the following false and annoying error: > find /sys/devices -name modalias -print0 | xargs -0 cat >/dev/null cat: /sys/devices/vio/4000/modalias: No such device cat: /sys/devices/vio/4001/modalias: No such device cat: /sys/devices/vio/4002/modalias: No such device cat: /sys/devices/vio/4004/modalias: No such device cat: /sys/devices/vio/modalias: No such device Signed-off-by: Prarit Bhargava Signed-off-by: Benjamin Herrenschmidt CC: --- arch/powerpc/kernel/vio.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 78a350670de3..d38cc08b16c7 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -1530,11 +1530,15 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, const char *cp; dn = dev->of_node; - if (!dn) - return -ENODEV; + if (!dn) { + strcat(buf, "\n"); + return strlen(buf); + } cp = of_get_property(dn, "compatible", NULL); - if (!cp) - return -ENODEV; + if (!cp) { + strcat(buf, "\n"); + return strlen(buf); + } return sprintf(buf, "vio:T%sS%s\n", vio_dev->type, cp); } From a53b27b3abeef406de92a2bb0ceb6fb4c3fb8fc4 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 2 Oct 2013 18:04:06 +1000 Subject: [PATCH 342/459] powerpc/perf: Fix handling of FAB events Commit 4df4899 "Add power8 EBB support" included a bug in the handling of the FAB_CRESP_MATCH and FAB_TYPE_MATCH fields. These values are pulled out of the event code using EVENT_THR_CTL_SHIFT, however we were then or'ing that value directly into MMCR1. This meant we were failing to set the FAB fields correctly, and also potentially corrupting the value for PMC4SEL. Leading to no counts for the FAB events and incorrect counts for PMC4. The fix is simply to shift left the FAB value correctly before or'ing it with MMCR1. Reported-by: Sooraj Ravindran Nair Signed-off-by: Michael Ellerman Cc: # 3.10+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/power8-pmu.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c index 2ee4a707f0df..a3f7abd2f13f 100644 --- a/arch/powerpc/perf/power8-pmu.c +++ b/arch/powerpc/perf/power8-pmu.c @@ -199,6 +199,7 @@ #define MMCR1_UNIT_SHIFT(pmc) (60 - (4 * ((pmc) - 1))) #define MMCR1_COMBINE_SHIFT(pmc) (35 - ((pmc) - 1)) #define MMCR1_PMCSEL_SHIFT(pmc) (24 - (((pmc) - 1)) * 8) +#define MMCR1_FAB_SHIFT 36 #define MMCR1_DC_QUAL_SHIFT 47 #define MMCR1_IC_QUAL_SHIFT 46 @@ -388,8 +389,8 @@ static int power8_compute_mmcr(u64 event[], int n_ev, * the threshold bits are used for the match value. */ if (event_is_fab_match(event[i])) { - mmcr1 |= (event[i] >> EVENT_THR_CTL_SHIFT) & - EVENT_THR_CTL_MASK; + mmcr1 |= ((event[i] >> EVENT_THR_CTL_SHIFT) & + EVENT_THR_CTL_MASK) << MMCR1_FAB_SHIFT; } else { val = (event[i] >> EVENT_THR_CTL_SHIFT) & EVENT_THR_CTL_MASK; mmcra |= val << MMCRA_THR_CTL_SHIFT; From c69e63b0f135fa51d6e1c38b5ac8a1def15ea3fa Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 2 Oct 2013 17:15:15 +1000 Subject: [PATCH 343/459] powerpc/tm: Turn interrupts hard off in tm_reclaim() We can't take IRQs in tm_reclaim as we might have a bogus r13 and r1. This turns IRQs hard off in this function. Signed-off-by: Michael Neuling Cc: # 3.9+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/tm.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S index 7b60b9851469..8ece1908be1a 100644 --- a/arch/powerpc/kernel/tm.S +++ b/arch/powerpc/kernel/tm.S @@ -123,6 +123,7 @@ _GLOBAL(tm_reclaim) mr r15, r14 ori r15, r15, MSR_FP li r16, MSR_RI + ori r16, r16, MSR_EE /* IRQs hard off */ andc r15, r15, r16 oris r15, r15, MSR_VEC@h #ifdef CONFIG_VSX From e9bdc3d6143d1c4b8d8ce5231fc958268331f983 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Thu, 26 Sep 2013 13:29:09 +1000 Subject: [PATCH 344/459] powerpc/tm: Switch out userspace PPR and DSCR sooner When we do a treclaim or trecheckpoint we end up running with userspace PPR and DSCR values. Currently we don't do anything special to avoid running with user values which could cause a severe performance degradation. This patch moves the PPR and DSCR save and restore around treclaim and trecheckpoint so that we run with user values for a much shorter period. More care is taken with the PPR as it's impact is greater than the DSCR. This is similar to user exceptions, where we run HTM_MEDIUM early to ensure that we don't run with a userspace PPR values in the kernel. Signed-off-by: Michael Neuling Cc: # 3.9+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/tm.S | 96 ++++++++++++++++++++++++++-------------- 1 file changed, 64 insertions(+), 32 deletions(-) diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S index 8ece1908be1a..cd809eaa8b5c 100644 --- a/arch/powerpc/kernel/tm.S +++ b/arch/powerpc/kernel/tm.S @@ -79,6 +79,11 @@ _GLOBAL(tm_abort) TABORT(R3) blr + .section ".toc","aw" +DSCR_DEFAULT: + .tc dscr_default[TC],dscr_default + + .section ".text" /* void tm_reclaim(struct thread_struct *thread, * unsigned long orig_msr, @@ -188,11 +193,18 @@ dont_backup_fp: std r1, PACATMSCRATCH(r13) ld r1, PACAR1(r13) + /* Store the PPR in r11 and reset to decent value */ + std r11, GPR11(r1) /* Temporary stash */ + mfspr r11, SPRN_PPR + HMT_MEDIUM + /* Now get some more GPRS free */ std r7, GPR7(r1) /* Temporary stash */ std r12, GPR12(r1) /* '' '' '' */ ld r12, STACK_PARAM(0)(r1) /* Param 0, thread_struct * */ + std r11, THREAD_TM_PPR(r12) /* Store PPR and free r11 */ + addi r7, r12, PT_CKPT_REGS /* Thread's ckpt_regs */ /* Make r7 look like an exception frame so that we @@ -204,15 +216,19 @@ dont_backup_fp: SAVE_GPR(0, r7) /* user r0 */ SAVE_GPR(2, r7) /* user r2 */ SAVE_4GPRS(3, r7) /* user r3-r6 */ - SAVE_4GPRS(8, r7) /* user r8-r11 */ + SAVE_GPR(8, r7) /* user r8 */ + SAVE_GPR(9, r7) /* user r9 */ + SAVE_GPR(10, r7) /* user r10 */ ld r3, PACATMSCRATCH(r13) /* user r1 */ ld r4, GPR7(r1) /* user r7 */ - ld r5, GPR12(r1) /* user r12 */ - GET_SCRATCH0(6) /* user r13 */ + ld r5, GPR11(r1) /* user r11 */ + ld r6, GPR12(r1) /* user r12 */ + GET_SCRATCH0(8) /* user r13 */ std r3, GPR1(r7) std r4, GPR7(r7) - std r5, GPR12(r7) - std r6, GPR13(r7) + std r5, GPR11(r7) + std r6, GPR12(r7) + std r8, GPR13(r7) SAVE_NVGPRS(r7) /* user r14-r31 */ @@ -235,14 +251,12 @@ dont_backup_fp: std r6, _XER(r7) - /* ******************** TAR, PPR, DSCR ********** */ + /* ******************** TAR, DSCR ********** */ mfspr r3, SPRN_TAR - mfspr r4, SPRN_PPR - mfspr r5, SPRN_DSCR + mfspr r4, SPRN_DSCR std r3, THREAD_TM_TAR(r12) - std r4, THREAD_TM_PPR(r12) - std r5, THREAD_TM_DSCR(r12) + std r4, THREAD_TM_DSCR(r12) /* MSR and flags: We don't change CRs, and we don't need to alter * MSR. @@ -259,7 +273,7 @@ dont_backup_fp: std r3, THREAD_TM_TFHAR(r12) std r4, THREAD_TM_TFIAR(r12) - /* AMR and PPR are checkpointed too, but are unsupported by Linux. */ + /* AMR is checkpointed too, but is unsupported by Linux. */ /* Restore original MSR/IRQ state & clear TM mode */ ld r14, TM_FRAME_L0(r1) /* Orig MSR */ @@ -275,6 +289,12 @@ dont_backup_fp: mtcr r4 mtlr r0 ld r2, 40(r1) + + /* Load system default DSCR */ + ld r4, DSCR_DEFAULT@toc(r2) + ld r0, 0(r4) + mtspr SPRN_DSCR, r0 + blr @@ -359,25 +379,24 @@ dont_restore_fp: restore_gprs: - /* ******************** TAR, PPR, DSCR ********** */ - ld r4, THREAD_TM_TAR(r3) - ld r5, THREAD_TM_PPR(r3) - ld r6, THREAD_TM_DSCR(r3) - - mtspr SPRN_TAR, r4 - mtspr SPRN_PPR, r5 - mtspr SPRN_DSCR, r6 - /* ******************** CR,LR,CCR,MSR ********** */ - ld r3, _CTR(r7) - ld r4, _LINK(r7) - ld r5, _CCR(r7) - ld r6, _XER(r7) + ld r4, _CTR(r7) + ld r5, _LINK(r7) + ld r6, _CCR(r7) + ld r8, _XER(r7) - mtctr r3 - mtlr r4 - mtcr r5 - mtxer r6 + mtctr r4 + mtlr r5 + mtcr r6 + mtxer r8 + + /* ******************** TAR ******************** */ + ld r4, THREAD_TM_TAR(r3) + mtspr SPRN_TAR, r4 + + /* Load up the PPR and DSCR in GPRs only at this stage */ + ld r5, THREAD_TM_DSCR(r3) + ld r6, THREAD_TM_PPR(r3) /* Clear the MSR RI since we are about to change R1. EE is already off */ @@ -385,19 +404,26 @@ restore_gprs: mtmsrd r4, 1 REST_4GPRS(0, r7) /* GPR0-3 */ - REST_GPR(4, r7) /* GPR4-6 */ - REST_GPR(5, r7) - REST_GPR(6, r7) + REST_GPR(4, r7) /* GPR4 */ REST_4GPRS(8, r7) /* GPR8-11 */ REST_2GPRS(12, r7) /* GPR12-13 */ REST_NVGPRS(r7) /* GPR14-31 */ - ld r7, GPR7(r7) /* GPR7 */ + /* Load up PPR and DSCR here so we don't run with user values for long + */ + mtspr SPRN_DSCR, r5 + mtspr SPRN_PPR, r6 + + REST_GPR(5, r7) /* GPR5-7 */ + REST_GPR(6, r7) + ld r7, GPR7(r7) /* Commit register state as checkpointed state: */ TRECHKPT + HMT_MEDIUM + /* Our transactional state has now changed. * * Now just get out of here. Transactional (current) state will be @@ -420,6 +446,12 @@ restore_gprs: mtcr r4 mtlr r0 ld r2, 40(r1) + + /* Load system default DSCR */ + ld r4, DSCR_DEFAULT@toc(r2) + ld r0, 0(r4) + mtspr SPRN_DSCR, r0 + blr /* ****************************************************************** */ From f3fc4884ebe6ae649d3723be14b219230d3b7fd2 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Wed, 2 Oct 2013 15:53:16 -0700 Subject: [PATCH 345/459] drm/i915/hsw: Disable L3 caching of atomic memory operations. Otherwise using any atomic memory operation will lock up the GPU due to a Haswell hardware bug. v2: Use the _MASKED_BIT_ENABLE macro. Drop drm parameter definition. Signed-off-by: Francisco Jerez Reviewed-by: Ben Widawsky Cc: Daniel Vetter Cc: [danvet: Fix checkpatch fail.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 6 ++++++ drivers/gpu/drm/i915/intel_pm.c | 5 +++++ 2 files changed, 11 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index c159e1a6810f..38f96f65d87a 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3881,6 +3881,9 @@ #define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG 0x9030 #define GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB (1<<11) +#define HSW_SCRATCH1 0xb038 +#define HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE (1<<27) + #define HSW_FUSE_STRAP 0x42014 #define HSW_CDCLK_LIMIT (1 << 24) @@ -4728,6 +4731,9 @@ #define GEN7_ROW_CHICKEN2_GT2 0xf4f4 #define DOP_CLOCK_GATING_DISABLE (1<<0) +#define HSW_ROW_CHICKEN3 0xe49c +#define HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE (1 << 6) + #define G4X_AUD_VID_DID (dev_priv->info->display_mmio_offset + 0x62020) #define INTEL_AUDIO_DEVCL 0x808629FB #define INTEL_AUDIO_DEVBLC 0x80862801 diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 73a8efc65615..f4c5e95b2d6f 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4953,6 +4953,11 @@ static void haswell_init_clock_gating(struct drm_device *dev) I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER, GEN7_WA_L3_CHICKEN_MODE); + /* L3 caching of data atomics doesn't work -- disable it. */ + I915_WRITE(HSW_SCRATCH1, HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE); + I915_WRITE(HSW_ROW_CHICKEN3, + _MASKED_BIT_ENABLE(HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE)); + /* This is required by WaCatErrorRejectionIssue:hsw */ I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG, I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) | From c807f64340932e19f0d2ac9b30c8381e1f60663a Mon Sep 17 00:00:00 2001 From: Jack Wang Date: Mon, 30 Sep 2013 10:09:05 +0200 Subject: [PATCH 346/459] ib_srpt: always set response for task management The SRP specification requires: "Response data shall be provided in any SRP_RSP response that is sent in response to an SRP_TSK_MGMT request (see 6.7). The information in the RSP_CODE field (see table 24) shall indicate the completion status of the task management function." So fix this to avoid the SRP initiator interprets task management functions that succeeded as failed. Signed-off-by: Jack Wang Cc: stable@vger.kernel.org # 3.3+ Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/srpt/ib_srpt.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 9ea7727a2825..6c923c7039a1 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -1588,7 +1588,7 @@ static int srpt_build_tskmgmt_rsp(struct srpt_rdma_ch *ch, int resp_data_len; int resp_len; - resp_data_len = (rsp_code == SRP_TSK_MGMT_SUCCESS) ? 0 : 4; + resp_data_len = 4; resp_len = sizeof(*srp_rsp) + resp_data_len; srp_rsp = ioctx->ioctx.buf; @@ -1600,11 +1600,9 @@ static int srpt_build_tskmgmt_rsp(struct srpt_rdma_ch *ch, + atomic_xchg(&ch->req_lim_delta, 0)); srp_rsp->tag = tag; - if (rsp_code != SRP_TSK_MGMT_SUCCESS) { - srp_rsp->flags |= SRP_RSP_FLAG_RSPVALID; - srp_rsp->resp_data_len = cpu_to_be32(resp_data_len); - srp_rsp->data[3] = rsp_code; - } + srp_rsp->flags |= SRP_RSP_FLAG_RSPVALID; + srp_rsp->resp_data_len = cpu_to_be32(resp_data_len); + srp_rsp->data[3] = rsp_code; return resp_len; } From b7191253b302a9b98758c3616761ae111b6264b9 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 1 Oct 2013 16:46:37 -0700 Subject: [PATCH 347/459] target: Reset data_length for COMPARE_AND_WRITE to NoLB * block_size This patch resets se_cmd->data_length for COMPARE_AND_WRITE emulation within sbc_compare_and_write() to NoLB * block_size in order to address a bug with FILEIO backends where a I/O failure will occur when data_length does not match the I/O size being actually dispatched for the individual per block READs + WRITEs. This is done late enough in sbc_compare_and_write() after the memory allocations have occured in transport_generic_new_cmd() to not cause any unwanted side-effects. Reported-by: Thomas Glanzmann Tested-by: Thomas Glanzmann Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_sbc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c index 6c17295e8d7c..a9dca116011e 100644 --- a/drivers/target/target_core_sbc.c +++ b/drivers/target/target_core_sbc.c @@ -508,6 +508,12 @@ sbc_compare_and_write(struct se_cmd *cmd) cmd->transport_complete_callback = NULL; return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; } + /* + * Reset cmd->data_length to individual block_size in order to not + * confuse backend drivers that depend on this value matching the + * size of the I/O being submitted. + */ + cmd->data_length = cmd->t_task_nolb * dev->dev_attrib.block_size; ret = cmd->execute_rw(cmd, cmd->t_bidi_data_sg, cmd->t_bidi_data_nents, DMA_FROM_DEVICE); From d8855c154e748c9ccd7c78e6478560ed61438e7d Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 1 Oct 2013 16:53:10 -0700 Subject: [PATCH 348/459] target: Fix recursive COMPARE_AND_WRITE callback failure This patch addresses a bug when compare_and_write_callback() invoked from target_complete_ok_work() hits an failure from __target_execute_cmd() -> cmd->execute_cmd(), that ends up calling transport_generic_request_failure() -> compare_and_write_post(), thus causing SCF_COMPARE_AND_WRITE_POST to incorrectly be set. The result of this bug is that target_complete_ok_work() no longer hits the if (!rc && !(cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE_POST) check that forces an immediate return, and instead double completes the se_cmd in question, triggering an OOPs in the process. This patch changes compare_and_write_post() to only set this bit when a failure has not already occured to ensure the immediate return from within target_complete_ok_work(), and thus allow transport_generic_request_failure() to handle the sending of the CHECK_CONDITION exception status. Reported-by: Thomas Glanzmann Tested-by: Thomas Glanzmann Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_sbc.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c index a9dca116011e..1393d0ed746a 100644 --- a/drivers/target/target_core_sbc.c +++ b/drivers/target/target_core_sbc.c @@ -349,7 +349,16 @@ static sense_reason_t compare_and_write_post(struct se_cmd *cmd) { struct se_device *dev = cmd->se_dev; - cmd->se_cmd_flags |= SCF_COMPARE_AND_WRITE_POST; + /* + * Only set SCF_COMPARE_AND_WRITE_POST to force a response fall-through + * within target_complete_ok_work() if the command was successfully + * sent to the backend driver. + */ + spin_lock_irq(&cmd->t_state_lock); + if ((cmd->transport_state & CMD_T_SENT) && !cmd->scsi_status) + cmd->se_cmd_flags |= SCF_COMPARE_AND_WRITE_POST; + spin_unlock_irq(&cmd->t_state_lock); + /* * Unlock ->caw_sem originally obtained during sbc_compare_and_write() * before the original READ I/O submission. From db60df88ec39715fc3fb2a846cf35837e074c11d Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 1 Oct 2013 17:04:40 -0700 Subject: [PATCH 349/459] target: Fail on non zero scsi_status in compare_and_write_callback This patch addresses a bug for backends such as IBLOCK that perform asynchronous completion via transport_complete_cmd(), that will call target_complete_failure_work() -> transport_generic_request_failure(), upon exception status and invoke cmd->transport_complete_callback() -> compare_and_write_callback() incorrectly during the failure case. It adds a check for a non zero se_cmd->scsi_status within the first invocation of compare_and_write_callback(), and will jump to out plus up se_device->caw_sem before exiting the callback. Reported-by: Thomas Glanzmann Tested-by: Thomas Glanzmann Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_sbc.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c index 1393d0ed746a..4714c6f8da4b 100644 --- a/drivers/target/target_core_sbc.c +++ b/drivers/target/target_core_sbc.c @@ -372,7 +372,7 @@ static sense_reason_t compare_and_write_callback(struct se_cmd *cmd) { struct se_device *dev = cmd->se_dev; struct scatterlist *write_sg = NULL, *sg; - unsigned char *buf, *addr; + unsigned char *buf = NULL, *addr; struct sg_mapping_iter m; unsigned int offset = 0, len; unsigned int nlbas = cmd->t_task_nolb; @@ -387,6 +387,15 @@ static sense_reason_t compare_and_write_callback(struct se_cmd *cmd) */ if (!cmd->t_data_sg || !cmd->t_bidi_data_sg) return TCM_NO_SENSE; + /* + * Immediately exit + release dev->caw_sem if command has already + * been failed with a non-zero SCSI status. + */ + if (cmd->scsi_status) { + pr_err("compare_and_write_callback: non zero scsi_status:" + " 0x%02x\n", cmd->scsi_status); + goto out; + } buf = kzalloc(cmd->data_length, GFP_KERNEL); if (!buf) { From 268d76430d1b68c340687357ffd18b4b12d02269 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 3 Oct 2013 02:15:50 -0700 Subject: [PATCH 350/459] spi/hspi: fixup Runtime PM enable timing 3e00a09d2fbd64f0ad98e7c8c29dbf9e038fc746 (spi/hspi: Convert to core runtime PM) enabled master->auto_runtime_pm. Then, pm_runtime_enable() is required *before* spi_register_master() calling. This patch fixed it up. Kernel will hang up with "spi_master spi0: Failed to power device: -13" message without this patch. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- drivers/spi/spi-sh-hspi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c index 0b68cb592fa4..e488a90a98b8 100644 --- a/drivers/spi/spi-sh-hspi.c +++ b/drivers/spi/spi-sh-hspi.c @@ -296,6 +296,8 @@ static int hspi_probe(struct platform_device *pdev) goto error1; } + pm_runtime_enable(&pdev->dev); + master->num_chipselect = 1; master->bus_num = pdev->id; master->setup = hspi_setup; @@ -309,8 +311,6 @@ static int hspi_probe(struct platform_device *pdev) goto error1; } - pm_runtime_enable(&pdev->dev); - return 0; error1: From 1dc1c33879bf47500565e627506f3d4e150e1cae Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 20 Sep 2013 23:01:06 +0300 Subject: [PATCH 351/459] ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT With DT-based boot, the GPMC OneNAND sync mode setup does not work correctly. During the async mode setup, sync flags gets incorrectly set in the onenand_async data and the system crashes during the async setup. Also, the sync mode never gets set in gpmc_onenand_data->flags, so even without the crash, the actual sync mode setup would never be called. The patch fixes this by adjusting the gpmc_onenand_data->flags when the data is read from the DT. Also while doing this we force the onenand_async to be always async. The patch enables to use the following DTS chunk (that should correspond the arch/arm/mach-omap2/board-rm680.c board file setup) with Nokia N950, which currently crashes with 3.12-rc1. The crash output can be also found below. &gpmc { ranges = <0 0 0x04000000 0x20000000>; onenand@0,0 { #address-cells = <1>; #size-cells = <1>; reg = <0 0 0x20000000>; gpmc,sync-read; gpmc,sync-write; gpmc,burst-length = <16>; gpmc,burst-read; gpmc,burst-wrap; gpmc,burst-write; gpmc,device-width = <2>; gpmc,mux-add-data = <2>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <87>; gpmc,cs-wr-off-ns = <87>; gpmc,adv-on-ns = <0>; gpmc,adv-rd-off-ns = <10>; gpmc,adv-wr-off-ns = <10>; gpmc,oe-on-ns = <15>; gpmc,oe-off-ns = <87>; gpmc,we-on-ns = <0>; gpmc,we-off-ns = <87>; gpmc,rd-cycle-ns = <112>; gpmc,wr-cycle-ns = <112>; gpmc,access-ns = <81>; gpmc,page-burst-access-ns = <15>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,wait-monitoring-ns = <0>; gpmc,clk-activation-ns = <5>; gpmc,wr-data-mux-bus-ns = <30>; gpmc,wr-access-ns = <81>; gpmc,sync-clk-ps = <15000>; }; }; [ 1.467559] GPMC CS0: cs_on : 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.474822] GPMC CS0: cs_rd_off : 1 ticks, 5 ns (was 24 ticks) 5 ns [ 1.482116] GPMC CS0: cs_wr_off : 14 ticks, 71 ns (was 24 ticks) 71 ns [ 1.489349] GPMC CS0: adv_on : 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.496582] GPMC CS0: adv_rd_off: 3 ticks, 15 ns (was 3 ticks) 15 ns [ 1.503845] GPMC CS0: adv_wr_off: 3 ticks, 15 ns (was 3 ticks) 15 ns [ 1.511077] GPMC CS0: oe_on : 3 ticks, 15 ns (was 4 ticks) 15 ns [ 1.518310] GPMC CS0: oe_off : 1 ticks, 5 ns (was 24 ticks) 5 ns [ 1.525543] GPMC CS0: we_on : 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.532806] GPMC CS0: we_off : 8 ticks, 40 ns (was 24 ticks) 40 ns [ 1.540039] GPMC CS0: rd_cycle : 4 ticks, 20 ns (was 29 ticks) 20 ns [ 1.547302] GPMC CS0: wr_cycle : 4 ticks, 20 ns (was 29 ticks) 20 ns [ 1.554504] GPMC CS0: access : 0 ticks, 0 ns (was 23 ticks) 0 ns [ 1.561767] GPMC CS0: page_burst_access: 0 ticks, 0 ns (was 3 ticks) 0 ns [ 1.569641] GPMC CS0: bus_turnaround: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.577270] GPMC CS0: cycle2cycle_delay: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.585144] GPMC CS0: wait_monitoring: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.592834] GPMC CS0: clk_activation: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.600463] GPMC CS0: wr_data_mux_bus: 5 ticks, 25 ns (was 8 ticks) 25 ns [ 1.608154] GPMC CS0: wr_access : 0 ticks, 0 ns (was 23 ticks) 0 ns [ 1.615386] GPMC CS0 CLK period is 5 ns (div 1) [ 1.625122] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf009e442 [ 1.633178] Internal error: : 1008 [#1] ARM [ 1.637573] Modules linked in: [ 1.640777] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-rc1-n9xx-los.git-5318619-00006-g4baa700-dirty #26 [ 1.651123] task: ef04c000 ti: ef050000 task.ti: ef050000 [ 1.656799] PC is at gpmc_onenand_setup+0x98/0x1e0 [ 1.661865] LR is at gpmc_cs_set_timings+0x494/0x5a4 [ 1.667083] pc : [] lr : [] psr: 60000113 [ 1.667083] sp : ef051d10 ip : ef051ce0 fp : ef051d94 [ 1.679138] r10: c0caaf60 r9 : ef050000 r8 : ef18b32c [ 1.684631] r7 : f0080000 r6 : c0caaf60 r5 : 00000000 r4 : f009e400 [ 1.691497] r3 : f009e442 r2 : 80050000 r1 : 00000014 r0 : 00000000 [ 1.698333] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.706024] Control: 10c5387d Table: af290019 DAC: 00000015 [ 1.712066] Process swapper (pid: 1, stack limit = 0xef050240) [ 1.718200] Stack: (0xef051d10 to 0xef052000) [ 1.722778] 1d00: 00004000 00001402 00000000 00000005 [ 1.731384] 1d20: 00000047 00000000 0000000f 0000000f 00000000 00000028 0000000f 00000005 [ 1.739990] 1d40: 00000000 00000000 00000014 00000014 00000000 00000000 00000000 00000000 [ 1.748596] 1d60: 00000000 00000019 00000000 00000000 ef18b000 ef099c50 c0c8cb30 00000000 [ 1.757171] 1d80: c0488074 c048f868 ef051dcc ef051d98 c024447c c002dfb4 00000000 c048f868 [ 1.765777] 1da0: 00000000 00000000 c010e4a4 c0dbbb7c c0c8cb40 00000000 c0ca2500 c0488074 [ 1.774383] 1dc0: ef051ddc ef051dd0 c01fd508 c0244370 ef051dfc ef051de0 c01fc204 c01fd4f4 [ 1.782989] 1de0: c0c8cb40 c0ca2500 c0c8cb74 00000000 ef051e1c ef051e00 c01fc3b0 c01fc104 [ 1.791595] 1e00: ef0983bc 00000000 c0ca2500 c01fc31c ef051e44 ef051e20 c01fa794 c01fc328 [ 1.800201] 1e20: ef03634c ef0983b0 ef27d534 c0ca2500 ef27d500 c0c9a2f8 ef051e54 ef051e48 [ 1.808807] 1e40: c01fbcfc c01fa744 ef051e84 ef051e58 c01fb838 c01fbce4 c0411df8 c0caa040 [ 1.817413] 1e60: ef051e84 c0ca2500 00000006 c0caa040 00000066 c0488074 ef051e9c ef051e88 [ 1.825988] 1e80: c01fca30 c01fb768 c04975b8 00000006 ef051eac ef051ea0 c01fd728 c01fc9bc [ 1.834594] 1ea0: ef051ebc ef051eb0 c048808c c01fd6e4 ef051f4c ef051ec0 c0008888 c0488080 [ 1.843200] 1ec0: 0000006f c046bae8 00000000 00000000 ef051efc ef051ee0 ef051f04 ef051ee8 [ 1.851806] 1ee0: c046d400 c0181218 c046d410 c18da8d5 c036a8e4 00000066 ef051f4c ef051f08 [ 1.860412] 1f00: c004b9a8 c046d41c c048f840 00000006 00000006 c046b488 00000000 c043ec08 [ 1.869018] 1f20: ef051f4c c04975b8 00000006 c0caa040 00000066 c046d410 c048f85c c048f868 [ 1.877593] 1f40: ef051f94 ef051f50 c046db8c c00087a0 00000006 00000006 c046d410 ffffffff [ 1.886199] 1f60: ffffffff ffffffff ffffffff 00000000 c0348fd0 00000000 00000000 00000000 [ 1.894805] 1f80: 00000000 00000000 ef051fac ef051f98 c0348fe0 c046daa8 00000000 00000000 [ 1.903411] 1fa0: 00000000 ef051fb0 c000e7f8 c0348fdc 00000000 00000000 00000000 00000000 [ 1.912017] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.920623] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff [ 1.929199] Backtrace: [ 1.931793] [] (gpmc_onenand_setup+0x0/0x1e0) from [] (omap2_onenand_probe+0x118/0x49c) [ 1.942047] [] (omap2_onenand_probe+0x0/0x49c) from [] (platform_drv_probe+0x20/0x24) [ 1.952117] r8:c0488074 r7:c0ca2500 r6:00000000 r5:c0c8cb40 r4:c0dbbb7c [ 1.959197] [] (platform_drv_probe+0x0/0x24) from [] (driver_probe_device+0x10c/0x224) [ 1.969360] [] (driver_probe_device+0x0/0x224) from [] (__driver_attach+0x94/0x98) [ 1.979125] r7:00000000 r6:c0c8cb74 r5:c0ca2500 r4:c0c8cb40 [ 1.985107] [] (__driver_attach+0x0/0x98) from [] (bus_for_each_dev+0x5c/0x90) [ 1.994506] r6:c01fc31c r5:c0ca2500 r4:00000000 r3:ef0983bc [ 2.000488] [] (bus_for_each_dev+0x0/0x90) from [] (driver_attach+0x24/0x28) [ 2.009735] r6:c0c9a2f8 r5:ef27d500 r4:c0ca2500 [ 2.014587] [] (driver_attach+0x0/0x28) from [] (bus_add_driver+0xdc/0x260) [ 2.023742] [] (bus_add_driver+0x0/0x260) from [] (driver_register+0x80/0xfc) [ 2.033081] r8:c0488074 r7:00000066 r6:c0caa040 r5:00000006 r4:c0ca2500 [ 2.040161] [] (driver_register+0x0/0xfc) from [] (__platform_driver_register+0x50/0x64) [ 2.050476] r5:00000006 r4:c04975b8 [ 2.054260] [] (__platform_driver_register+0x0/0x64) from [] (omap2_onenand_driver_init+0x18/0x20) [ 2.065490] [] (omap2_onenand_driver_init+0x0/0x20) from [] (do_one_initcall+0xf4/0x150) [ 2.075836] [] (do_one_initcall+0x0/0x150) from [] (kernel_init_freeable+0xf0/0x1b4) [ 2.085815] [] (kernel_init_freeable+0x0/0x1b4) from [] (kernel_init+0x10/0xec) [ 2.095336] [] (kernel_init+0x0/0xec) from [] (ret_from_fork+0x14/0x3c) [ 2.104125] r4:00000000 r3:00000000 [ 2.107879] Code: ebffc3ae e2505000 ba00002e e2843042 (e1d320b0) [ 2.114318] ---[ end trace b8ee3e3e5e002451 ]--- Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc-onenand.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 64b5a8346982..8b6876c98ce1 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -272,9 +272,19 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) struct gpmc_timings t; int ret; - if (gpmc_onenand_data->of_node) + if (gpmc_onenand_data->of_node) { gpmc_read_settings_dt(gpmc_onenand_data->of_node, &onenand_async); + if (onenand_async.sync_read || onenand_async.sync_write) { + if (onenand_async.sync_write) + gpmc_onenand_data->flags |= + ONENAND_SYNC_READWRITE; + else + gpmc_onenand_data->flags |= ONENAND_SYNC_READ; + onenand_async.sync_read = false; + onenand_async.sync_write = false; + } + } omap2_onenand_set_async_mode(onenand_base); From 0cc4b69960f3d1231023ad5de6cacbc1fbee2a88 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Thu, 3 Oct 2013 13:31:26 -0300 Subject: [PATCH 352/459] drm/i915: Mask LPSP to get PSR working even with Power Well in use by audio. Power Well in use forces constantly PSR to exit. On recent Kernel I noticed that PSR Performance Counter was always 0 indicating that PSR was never really achieved. By masking LPSP, PSR can work normally and save power on Haswell. Two bugs had been raised with PSR flag enabled: - "Screen flickers when booted by enabling PSR in the kernel (i915.enable_psr=1) , the system is booting to a gray screen." - "When booting the DUT with PSR feature enabled in the kernel (i915.enable_psr=1) , the system is booting to a gray screen." Both bugs has been fixed by this patch. v2: proper comment for -fixes Tested-by: Selvaraj, Elavarasan Signed-off-by: Rodrigo Vivi Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 79c14e298ba6..2c555f91bfae 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1467,7 +1467,7 @@ static void intel_edp_psr_setup(struct intel_dp *intel_dp) /* Avoid continuous PSR exit by masking memup and hpd */ I915_WRITE(EDP_PSR_DEBUG_CTL, EDP_PSR_DEBUG_MASK_MEMUP | - EDP_PSR_DEBUG_MASK_HPD); + EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP); intel_dp->psr_setup_done = true; } From c9976dcf55c8aaa7037427b239f15e5acfc01a3a Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 29 Sep 2013 19:15:07 +0100 Subject: [PATCH 353/459] drm/i915: Only apply DPMS to the encoder if enabled The current test for an attached enabled encoder fails if we have multiple connectors aliased to the same encoder - both connectors believe they own the enabled encoder and so we attempt to both enable and disable DPMS on the encoder, leading to hilarity and an OOPs: [ 354.803064] WARNING: CPU: 0 PID: 482 at /usr/src/linux/dist/3.11.2/drivers/gpu/drm/i915/intel_display.c:3869 intel_modeset_check_state+0x764/0x770 [i915]() [ 354.803064] wrong connector dpms state [ 354.803084] Modules linked in: nfsd auth_rpcgss oid_registry exportfs nfs lockd sunrpc xt_nat iptable_nat nf_nat_ipv4 nf_nat xt_limit xt_LOG xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT ipv6 xt_recent xt_conntrack nf_conntrack iptable_filter ip_tables x_tables snd_hda_codec_realtek snd_hda_codec_hdmi x86_pkg_temp_thermal snd_hda_intel coretemp kvm_intel snd_hda_codec i915 kvm snd_hwdep snd_pcm_oss snd_mixer_oss crc32_pclmul snd_pcm crc32c_intel e1000e intel_agp igb ghash_clmulni_intel intel_gtt aesni_intel cfbfillrect aes_x86_64 cfbimgblt lrw cfbcopyarea drm_kms_helper ptp video thermal processor gf128mul snd_page_alloc drm snd_timer glue_helper 8250_pci snd pps_core ablk_helper agpgart cryptd sg soundcore fan i2c_algo_bit sr_mod thermal_sys 8250 i2c_i801 serial_core hwmon cdrom i2c_core evdev button [ 354.803086] CPU: 0 PID: 482 Comm: kworker/0:1 Not tainted 3.11.2 #1 [ 354.803087] Hardware name: Supermicro X10SAE/X10SAE, BIOS 1.00 05/03/2013 [ 354.803091] Workqueue: events console_callback [ 354.803092] 0000000000000009 ffff88023611db48 ffffffff814048ac ffff88023611db90 [ 354.803093] ffff88023611db80 ffffffff8103d4e3 ffff880230d82800 ffff880230f9b800 [ 354.803094] ffff880230f99000 ffff880230f99448 ffff8802351c0e00 ffff88023611dbe0 [ 354.803094] Call Trace: [ 354.803098] [] dump_stack+0x54/0x8d [ 354.803101] [] warn_slowpath_common+0x73/0x90 [ 354.803103] [] warn_slowpath_fmt+0x47/0x50 [ 354.803109] [] ? intel_ddi_connector_get_hw_state+0x5e/0x110 [i915] [ 354.803114] [] intel_modeset_check_state+0x764/0x770 [i915] [ 354.803117] [] intel_connector_dpms+0x3b/0x60 [i915] [ 354.803120] [] drm_fb_helper_dpms.isra.11+0x120/0x160 [drm_kms_helper] [ 354.803122] [] drm_fb_helper_blank+0x3e/0x80 [drm_kms_helper] [ 354.803123] [] fb_blank+0x52/0xc0 [ 354.803125] [] fbcon_blank+0x21b/0x2d0 [ 354.803127] [] ? update_rq_clock.part.74+0x13/0x30 [ 354.803129] [] ? lock_timer_base.isra.30+0x26/0x50 [ 354.803130] [] ? internal_add_timer+0x12/0x40 [ 354.803131] [] ? mod_timer+0xf8/0x1c0 [ 354.803133] [] do_unblank_screen+0xa1/0x1c0 [ 354.803134] [] poke_blanked_console+0xc7/0xd0 [ 354.803136] [] console_callback+0x13f/0x160 [ 354.803137] [] process_one_work+0x148/0x3d0 [ 354.803138] [] worker_thread+0x119/0x3a0 [ 354.803140] [] ? manage_workers.isra.30+0x2a0/0x2a0 [ 354.803141] [] kthread+0xbb/0xc0 [ 354.803142] [] ? kthread_create_on_node+0x120/0x120 [ 354.803144] [] ret_from_fork+0x7c/0xb0 [ 354.803145] [] ? kthread_create_on_node+0x120/0x120 This regression goes back to the big modeset rework and the conversion to the new dpms helpers which started with: commit 5ab432ef4997ce32c9406721b37ef6e97e57dae1 Author: Daniel Vetter Date: Sat Jun 30 08:59:56 2012 +0200 drm/i915/hdmi: convert to encoder->disable/enable Fixes: igt/kms_flip/dpms-off-confusion Reported-and-tested-by: Wakko Warner Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68030 Link: http://lkml.kernel.org/r/20130928185023.GA21672@animx.eu.org Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org [danvet: Add regression citation, mention the igt testcase this fixes and slap a cc: stable on the patch.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e5822e79f912..c89abd33124f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3941,8 +3941,6 @@ static void intel_connector_check_state(struct intel_connector *connector) * consider. */ void intel_connector_dpms(struct drm_connector *connector, int mode) { - struct intel_encoder *encoder = intel_attached_encoder(connector); - /* All the simple cases only support two dpms states. */ if (mode != DRM_MODE_DPMS_ON) mode = DRM_MODE_DPMS_OFF; @@ -3953,10 +3951,8 @@ void intel_connector_dpms(struct drm_connector *connector, int mode) connector->dpms = mode; /* Only need to change hw state when actually enabled */ - if (encoder->base.crtc) - intel_encoder_dpms(encoder, mode); - else - WARN_ON(encoder->connectors_active != false); + if (connector->encoder) + intel_encoder_dpms(to_intel_encoder(connector->encoder), mode); intel_modeset_check_state(connector->dev); } From e255a28598e8e63070322fc89bd34189dd660a89 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 3 Oct 2013 13:37:21 -0700 Subject: [PATCH 354/459] iscsi-target: Only perform wait_for_tasks when performing shutdown This patch changes transport_generic_free_cmd() to only wait_for_tasks when shutdown=true is passed to iscsit_free_cmd(). With the advent of >= v3.10 iscsi-target code using se_cmd->cmd_kref, the extra wait_for_tasks with shutdown=false is unnecessary, and may end up causing an extra context switch when releasing WRITEs. Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_util.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index f2de28e178fd..b0cac0c342e1 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -736,7 +736,7 @@ void iscsit_free_cmd(struct iscsi_cmd *cmd, bool shutdown) * Fallthrough */ case ISCSI_OP_SCSI_TMFUNC: - rc = transport_generic_free_cmd(&cmd->se_cmd, 1); + rc = transport_generic_free_cmd(&cmd->se_cmd, shutdown); if (!rc && shutdown && se_cmd && se_cmd->se_sess) { __iscsit_free_cmd(cmd, true, shutdown); target_put_sess_cmd(se_cmd->se_sess, se_cmd); @@ -752,7 +752,7 @@ void iscsit_free_cmd(struct iscsi_cmd *cmd, bool shutdown) se_cmd = &cmd->se_cmd; __iscsit_free_cmd(cmd, true, shutdown); - rc = transport_generic_free_cmd(&cmd->se_cmd, 1); + rc = transport_generic_free_cmd(&cmd->se_cmd, shutdown); if (!rc && shutdown && se_cmd->se_sess) { __iscsit_free_cmd(cmd, true, shutdown); target_put_sess_cmd(se_cmd->se_sess, se_cmd); From f56cbbb4b5871e5bc2838ddeeba5b29debc2a734 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 3 Oct 2013 13:56:14 -0700 Subject: [PATCH 355/459] iscsi-target: Perform release of acknowledged tags from RX context This patch converts iscsit_ack_from_expstatsn() to populate a local ack_list of commands, and call iscsit_free_cmd() directly from RX thread context, instead of using iscsit_add_cmd_to_immediate_queue() to queue the acknowledged commands to be released from TX thread context. It is helpful to release the acknowledge commands as quickly as possible, along with the associated percpu_ida tags, in order to prevent percpu_ida_alloc() from having to steal tags from other CPUs while waiting for iscsit_free_cmd() to happen from TX thread context. Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 35b61f7d6c63..38e44b9abf0f 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -753,7 +753,8 @@ static void iscsit_unmap_iovec(struct iscsi_cmd *cmd) static void iscsit_ack_from_expstatsn(struct iscsi_conn *conn, u32 exp_statsn) { - struct iscsi_cmd *cmd; + LIST_HEAD(ack_list); + struct iscsi_cmd *cmd, *cmd_p; conn->exp_statsn = exp_statsn; @@ -761,19 +762,23 @@ static void iscsit_ack_from_expstatsn(struct iscsi_conn *conn, u32 exp_statsn) return; spin_lock_bh(&conn->cmd_lock); - list_for_each_entry(cmd, &conn->conn_cmd_list, i_conn_node) { + list_for_each_entry_safe(cmd, cmd_p, &conn->conn_cmd_list, i_conn_node) { spin_lock(&cmd->istate_lock); if ((cmd->i_state == ISTATE_SENT_STATUS) && iscsi_sna_lt(cmd->stat_sn, exp_statsn)) { cmd->i_state = ISTATE_REMOVE; spin_unlock(&cmd->istate_lock); - iscsit_add_cmd_to_immediate_queue(cmd, conn, - cmd->i_state); + list_move_tail(&cmd->i_conn_node, &ack_list); continue; } spin_unlock(&cmd->istate_lock); } spin_unlock_bh(&conn->cmd_lock); + + list_for_each_entry_safe(cmd, cmd_p, &ack_list, i_conn_node) { + list_del(&cmd->i_conn_node); + iscsit_free_cmd(cmd, false); + } } static int iscsit_allocate_iovecs(struct iscsi_cmd *cmd) From 9e20ae339721d614a1b0768c48bd73b456ff7905 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 3 Oct 2013 14:03:59 -0700 Subject: [PATCH 356/459] iscsi-target; Allow an extra tag_num / 2 number of percpu_ida tags This patch bumps the default number of tags allocated per session by iscsi-target via transport_alloc_session_tags() -> percpu_ida_init() by another (tag_num / 2). This is done to take into account the tags waiting to be acknowledged and released in iscsit_ack_from_expstatsn(), but who's number are not directly limited by the CmdSN Window queue_depth being enforced by the target. Using a larger value here is also useful to prevent percpu_ida_alloc() from having to steal tags from other CPUs when no tags are available on the local CPU, while waiting for unacknowledged tags to be released. Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_nego.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c index 14d1aed5af1d..ef6d836a4d09 100644 --- a/drivers/target/iscsi/iscsi_target_nego.c +++ b/drivers/target/iscsi/iscsi_target_nego.c @@ -1192,7 +1192,7 @@ get_target: */ alloc_tags: tag_num = max_t(u32, ISCSIT_MIN_TAGS, queue_depth); - tag_num += ISCSIT_EXTRA_TAGS; + tag_num += (tag_num / 2) + ISCSIT_EXTRA_TAGS; tag_size = sizeof(struct iscsi_cmd) + conn->conn_transport->priv_size; ret = transport_alloc_session_tags(sess->se_sess, tag_num, tag_size); From 677a31565692d596ef42ea589b53ba289abf4713 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Wed, 2 Oct 2013 14:57:51 +0100 Subject: [PATCH 357/459] staging: comedi: ni_65xx: (bug fix) confine insn_bits to one subdevice The `insn_bits` handler `ni_65xx_dio_insn_bits()` has a `for` loop that currently writes (optionally) and reads back up to 5 "ports" consisting of 8 channels each. It reads up to 32 1-bit channels but can only read and write a whole port at once - it needs to handle up to 5 ports as the first channel it reads might not be aligned on a port boundary. It breaks out of the loop early if the next port it handles is beyond the final port on the card. It also breaks out early on the 5th port in the loop if the first channel was aligned. Unfortunately, it doesn't check that the current port it is dealing with belongs to the comedi subdevice the `insn_bits` handler is acting on. That's a bug. Redo the `for` loop to terminate after the final port belonging to the subdevice, changing the loop variable in the process to simplify things a bit. The `for` loop could now try and handle more than 5 ports if the subdevice has more than 40 channels, but the test `if (bitshift >= 32)` ensures it will break out early after 4 or 5 ports (depending on whether the first channel is aligned on a port boundary). (`bitshift` will be between -7 and 7 inclusive on the first iteration, increasing by 8 for each subsequent operation.) Signed-off-by: Ian Abbott Cc: # 3.10.y 3.11.y 3.12.y Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_65xx.c | 25 ++++++++++-------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c index 3ba4c5712dff..853f62b2b1a9 100644 --- a/drivers/staging/comedi/drivers/ni_65xx.c +++ b/drivers/staging/comedi/drivers/ni_65xx.c @@ -369,28 +369,23 @@ static int ni_65xx_dio_insn_bits(struct comedi_device *dev, { const struct ni_65xx_board *board = comedi_board(dev); struct ni_65xx_private *devpriv = dev->private; - unsigned base_bitfield_channel; - const unsigned max_ports_per_bitfield = 5; + int base_bitfield_channel; unsigned read_bits = 0; - unsigned j; + int last_port_offset = ni_65xx_port_by_channel(s->n_chan - 1); + int port_offset; base_bitfield_channel = CR_CHAN(insn->chanspec); - for (j = 0; j < max_ports_per_bitfield; ++j) { - const unsigned port_offset = - ni_65xx_port_by_channel(base_bitfield_channel) + j; - const unsigned port = - sprivate(s)->base_port + port_offset; - unsigned base_port_channel; + for (port_offset = ni_65xx_port_by_channel(base_bitfield_channel); + port_offset <= last_port_offset; port_offset++) { + unsigned port = sprivate(s)->base_port + port_offset; + int base_port_channel = port_offset * ni_65xx_channels_per_port; unsigned port_mask, port_data, port_read_bits; - int bitshift; - if (port >= ni_65xx_total_num_ports(board)) + int bitshift = base_port_channel - base_bitfield_channel; + + if (bitshift >= 32) break; - base_port_channel = port_offset * ni_65xx_channels_per_port; port_mask = data[0]; port_data = data[1]; - bitshift = base_port_channel - base_bitfield_channel; - if (bitshift >= 32 || bitshift <= -32) - break; if (bitshift > 0) { port_mask >>= bitshift; port_data >>= bitshift; From a214339d764a07b99dc0418685d6cc8a0a1970d5 Mon Sep 17 00:00:00 2001 From: David Cohen Date: Tue, 1 Oct 2013 14:32:58 -0700 Subject: [PATCH 358/459] usb: chipidea: add Intel Clovertrail pci id Also clean up the last item of the pci id list to be "cleaner". Signed-off-by: David Cohen Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/ci_hdrc_pci.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/ci_hdrc_pci.c b/drivers/usb/chipidea/ci_hdrc_pci.c index 042320a6c6c7..d514332ac081 100644 --- a/drivers/usb/chipidea/ci_hdrc_pci.c +++ b/drivers/usb/chipidea/ci_hdrc_pci.c @@ -129,7 +129,12 @@ static DEFINE_PCI_DEVICE_TABLE(ci_hdrc_pci_id_table) = { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829), .driver_data = (kernel_ulong_t)&penwell_pci_platdata, }, - { 0, 0, 0, 0, 0, 0, 0 /* end: all zeroes */ } + { + /* Intel Clovertrail */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe006), + .driver_data = (kernel_ulong_t)&penwell_pci_platdata, + }, + { 0 } /* end: all zeroes */ }; MODULE_DEVICE_TABLE(pci, ci_hdrc_pci_id_table); From a9fbf4d591da6cd1d3eaab826c7c15f77fc8f6a3 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Tue, 1 Oct 2013 19:00:49 +0100 Subject: [PATCH 359/459] xen/hvc: allow xenboot console to be used again Commit d0380e6c3c0f6edb986d8798a23acfaf33d5df23 (early_printk: consolidate random copies of identical code) added in 3.10 introduced a check for con->index == -1 in early_console_register(). Initialize index to -1 for the xenboot console so earlyprintk=xen works again. Signed-off-by: David Vrabel Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/hvc/hvc_xen.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index e61c36cbb866..c193af6a628f 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -636,6 +636,7 @@ struct console xenboot_console = { .name = "xenboot", .write = xenboot_write_console, .flags = CON_PRINTBUFFER | CON_BOOT | CON_ANYTIME, + .index = -1, }; #endif /* CONFIG_EARLY_PRINTK */ From edc530fe7ee5a562680615d2e7cd205879c751a7 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Tue, 17 Sep 2013 15:56:06 +0200 Subject: [PATCH 360/459] dmaengine: imx-dma: fix slow path issue in prep_dma_cyclic When perparing cyclic_dma buffers by the sound layer, it will dump the following lockdep trace. The leading snd_pcm_action_single get called with read_lock_irq called. To fix this, we change the kcalloc call from GFP_KERNEL to GFP_ATOMIC. WARNING: at kernel/lockdep.c:2740 lockdep_trace_alloc+0xcc/0x114() DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) Modules linked in: CPU: 0 PID: 832 Comm: aplay Not tainted 3.11.0-20130823+ #903 Backtrace: [] (dump_backtrace+0x0/0x10c) from [] (show_stack+0x18/0x1c) r6:c004c090 r5:00000009 r4:c2e0bd18 r3:00404000 [] (show_stack+0x0/0x1c) from [] (dump_stack+0x20/0x28) [] (dump_stack+0x0/0x28) from [] (warn_slowpath_common+0x54/0x70) [] (warn_slowpath_common+0x0/0x70) from [] (warn_slowpath_fmt+0x38/0x40) r8:00004000 r7:a3b90000 r6:000080d0 r5:60000093 r4:c2e0a000 r3:00000009 [] (warn_slowpath_fmt+0x0/0x40) from [] (lockdep_trace_alloc+0xcc/0x114) r3:c03955d8 r2:c03907db [] (lockdep_trace_alloc+0x0/0x114) from [] (__kmalloc+0x34/0x118) r6:000080d0 r5:c3800120 r4:000080d0 r3:c040a0f8 [] (__kmalloc+0x0/0x118) from [] (imxdma_prep_dma_cyclic+0x64/0x168) r7:a3b90000 r6:00000004 r5:c39d8420 r4:c3847150 [] (imxdma_prep_dma_cyclic+0x0/0x168) from [] (snd_dmaengine_pcm_trigger+0xa8/0x160) [] (snd_dmaengine_pcm_trigger+0x0/0x160) from [] (soc_pcm_trigger+0x90/0xb4) r8:c058c7b0 r7:c3b8140c r6:c39da560 r5:00000001 r4:c3b81000 [] (soc_pcm_trigger+0x0/0xb4) from [] (snd_pcm_do_start+0x2c/0x38) r7:00000000 r6:00000003 r5:c058c7b0 r4:c3b81000 [] (snd_pcm_do_start+0x0/0x38) from [] (snd_pcm_action_single+0x40/0x6c) [] (snd_pcm_action_single+0x0/0x6c) from [] (snd_pcm_action_lock_irq+0x7c/0x9c) r7:00000003 r6:c3b810f0 r5:c3b810f0 r4:c3b81000 [] (snd_pcm_action_lock_irq+0x0/0x9c) from [] (snd_pcm_common_ioctl1+0x7f8/0xfd0) r8:c3b7f888 r7:005407b8 r6:c2c991c0 r5:c3b81000 r4:c3b81000 r3:00004142 [] (snd_pcm_common_ioctl1+0x0/0xfd0) from [] (snd_pcm_playback_ioctl1+0x464/0x488) [] (snd_pcm_playback_ioctl1+0x0/0x488) from [] (snd_pcm_playback_ioctl+0x34/0x40) r8:c3b7f888 r7:00004142 r6:00000004 r5:c2c991c0 r4:005407b8 [] (snd_pcm_playback_ioctl+0x0/0x40) from [] (vfs_ioctl+0x30/0x44) [] (vfs_ioctl+0x0/0x44) from [] (do_vfs_ioctl+0x55c/0x5c0) [] (do_vfs_ioctl+0x0/0x5c0) from [] (SyS_ioctl+0x40/0x68) [] (SyS_ioctl+0x0/0x68) from [] (ret_fast_syscall+0x0/0x44) r8:c0009544 r7:00000036 r6:bedeaa58 r5:00000000 r4:000000c0 Signed-off-by: Michael Grzeschik Signed-off-by: Vinod Koul --- drivers/dma/imx-dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index 78f8ca5fccee..442af6189cbc 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -883,7 +883,7 @@ static struct dma_async_tx_descriptor *imxdma_prep_dma_cyclic( kfree(imxdmac->sg_list); imxdmac->sg_list = kcalloc(periods + 1, - sizeof(struct scatterlist), GFP_KERNEL); + sizeof(struct scatterlist), GFP_ATOMIC); if (!imxdmac->sg_list) return NULL; From 5a276fa6bdf82fd442046969603968c83626ce0b Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Tue, 17 Sep 2013 15:56:07 +0200 Subject: [PATCH 361/459] dmaengine: imx-dma: fix lockdep issue between irqhandler and tasklet The tasklet and irqhandler are using spin_lock while other routines are using spin_lock_irqsave/restore. This leads to lockdep issues as described bellow. This patch is changing the code to use spinlock_irq_save/restore in both code pathes. As imxdma_xfer_desc always gets called with spin_lock_irqsave lock held, this patch also removes the spare call inside the routine to avoid double locking. [ 403.358162] ================================= [ 403.362549] [ INFO: inconsistent lock state ] [ 403.366945] 3.10.0-20130823+ #904 Not tainted [ 403.371331] --------------------------------- [ 403.375721] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 403.381769] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 403.386762] (&(&imxdma->lock)->rlock){?.-...}, at: [] imxdma_tasklet+0x20/0x134 [ 403.395201] {IN-HARDIRQ-W} state was registered at: [ 403.400108] [] mark_lock+0x2a0/0x6b4 [ 403.404798] [] __lock_acquire+0x650/0x1a64 [ 403.410004] [] lock_acquire+0x94/0xa8 [ 403.414773] [] _raw_spin_lock+0x54/0x8c [ 403.419720] [] dma_irq_handler+0x78/0x254 [ 403.424845] [] handle_irq_event_percpu+0x38/0x1b4 [ 403.430670] [] handle_irq_event+0x44/0x64 [ 403.435789] [] handle_level_irq+0xd8/0xf0 [ 403.440903] [] generic_handle_irq+0x28/0x38 [ 403.446194] [] handle_IRQ+0x68/0x8c [ 403.450789] [] avic_handle_irq+0x3c/0x48 [ 403.455811] [] __irq_svc+0x44/0x74 [ 403.460314] [] cpu_startup_entry+0x88/0xf4 [ 403.465525] [] rest_init+0xb8/0xe0 [ 403.470045] [] start_kernel+0x28c/0x2d4 [ 403.474986] [] 0xa0008040 [ 403.478709] irq event stamp: 50854 [ 403.482140] hardirqs last enabled at (50854): [] tasklet_action+0x38/0xdc [ 403.489954] hardirqs last disabled at (50853): [] tasklet_action+0x20/0xdc [ 403.497761] softirqs last enabled at (50850): [] _local_bh_enable+0x14/0x18 [ 403.505741] softirqs last disabled at (50851): [] irq_exit+0x88/0xdc [ 403.513026] [ 403.513026] other info that might help us debug this: [ 403.519593] Possible unsafe locking scenario: [ 403.519593] [ 403.525548] CPU0 [ 403.528020] ---- [ 403.530491] lock(&(&imxdma->lock)->rlock); [ 403.534828] [ 403.537474] lock(&(&imxdma->lock)->rlock); [ 403.541983] [ 403.541983] *** DEADLOCK *** [ 403.541983] [ 403.547951] no locks held by swapper/0. [ 403.551813] [ 403.551813] stack backtrace: [ 403.556222] CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0-20130823+ #904 [ 403.563039] Backtrace: [ 403.565581] [] (dump_backtrace+0x0/0x10c) from [] (show_stack+0x18/0x1c) [ 403.574054] r6:00000000 r5:c05c51d8 r4:c040bd58 r3:00200000 [ 403.579872] [] (show_stack+0x0/0x1c) from [] (dump_stack+0x20/0x28) [ 403.587955] [] (dump_stack+0x0/0x28) from [] (print_usage_bug.part.28+0x224/0x28c) [ 403.597340] [] (print_usage_bug.part.28+0x0/0x28c) from [] (mark_lock+0x440/0x6b4) [ 403.606682] r8:c004a41c r7:00000000 r6:c040bd58 r5:c040c040 r4:00000002 [ 403.613566] [] (mark_lock+0x0/0x6b4) from [] (__lock_acquire+0x6cc/0x1a64) [ 403.622244] [] (__lock_acquire+0x0/0x1a64) from [] (lock_acquire+0x94/0xa8) [ 403.631010] [] (lock_acquire+0x0/0xa8) from [] (_raw_spin_lock+0x54/0x8c) [ 403.639614] [] (_raw_spin_lock+0x0/0x8c) from [] (imxdma_tasklet+0x20/0x134) [ 403.648434] r6:c3847010 r5:c040e890 r4:c38470d4 [ 403.653194] [] (imxdma_tasklet+0x0/0x134) from [] (tasklet_action+0x8c/0xdc) [ 403.662013] r8:c0599160 r7:00000000 r6:00000000 r5:c040e890 r4:c3847114 r3:c019d75c [ 403.670042] [] (tasklet_action+0x0/0xdc) from [] (__do_softirq+0xe4/0x1f0) [ 403.678687] r7:00000101 r6:c0402000 r5:c059919c r4:00000001 [ 403.684498] [] (__do_softirq+0x0/0x1f0) from [] (irq_exit+0x88/0xdc) [ 403.692652] [] (irq_exit+0x0/0xdc) from [] (handle_IRQ+0x6c/0x8c) [ 403.700514] r4:00000030 r3:00000110 [ 403.704192] [] (handle_IRQ+0x0/0x8c) from [] (avic_handle_irq+0x3c/0x48) [ 403.712664] r5:c0403f28 r4:c0593ebc [ 403.716343] [] (avic_handle_irq+0x0/0x48) from [] (__irq_svc+0x44/0x74) [ 403.724733] Exception stack(0xc0403f28 to 0xc0403f70) [ 403.729841] 3f20: 00000001 00000004 00000000 20000013 c0402000 c04104a8 [ 403.738078] 3f40: 00000002 c0b69620 a0004000 41069264 a03fb5f4 c0403f7c c0403f40 c0403f70 [ 403.746301] 3f60: c004b92c c0009e74 20000013 ffffffff [ 403.751383] r6:ffffffff r5:20000013 r4:c0009e74 r3:c004b92c [ 403.757210] [] (arch_cpu_idle+0x0/0x4c) from [] (cpu_startup_entry+0x88/0xf4) [ 403.766161] [] (cpu_startup_entry+0x0/0xf4) from [] (rest_init+0xb8/0xe0) [ 403.774753] [] (rest_init+0x0/0xe0) from [] (start_kernel+0x28c/0x2d4) [ 403.783051] r6:c03fc484 r5:ffffffff r4:c040a0e0 [ 403.787797] [] (start_kernel+0x0/0x2d4) from [] (0xa0008040) Signed-off-by: Michael Grzeschik Signed-off-by: Vinod Koul --- drivers/dma/imx-dma.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index 442af6189cbc..247aa7cae37c 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -437,17 +437,18 @@ static void dma_irq_handle_channel(struct imxdma_channel *imxdmac) struct imxdma_engine *imxdma = imxdmac->imxdma; int chno = imxdmac->channel; struct imxdma_desc *desc; + unsigned long flags; - spin_lock(&imxdma->lock); + spin_lock_irqsave(&imxdma->lock, flags); if (list_empty(&imxdmac->ld_active)) { - spin_unlock(&imxdma->lock); + spin_unlock_irqrestore(&imxdma->lock, flags); goto out; } desc = list_first_entry(&imxdmac->ld_active, struct imxdma_desc, node); - spin_unlock(&imxdma->lock); + spin_unlock_irqrestore(&imxdma->lock, flags); if (desc->sg) { u32 tmp; @@ -519,7 +520,6 @@ static int imxdma_xfer_desc(struct imxdma_desc *d) { struct imxdma_channel *imxdmac = to_imxdma_chan(d->desc.chan); struct imxdma_engine *imxdma = imxdmac->imxdma; - unsigned long flags; int slot = -1; int i; @@ -527,7 +527,6 @@ static int imxdma_xfer_desc(struct imxdma_desc *d) switch (d->type) { case IMXDMA_DESC_INTERLEAVED: /* Try to get a free 2D slot */ - spin_lock_irqsave(&imxdma->lock, flags); for (i = 0; i < IMX_DMA_2D_SLOTS; i++) { if ((imxdma->slots_2d[i].count > 0) && ((imxdma->slots_2d[i].xsr != d->x) || @@ -537,10 +536,8 @@ static int imxdma_xfer_desc(struct imxdma_desc *d) slot = i; break; } - if (slot < 0) { - spin_unlock_irqrestore(&imxdma->lock, flags); + if (slot < 0) return -EBUSY; - } imxdma->slots_2d[slot].xsr = d->x; imxdma->slots_2d[slot].ysr = d->y; @@ -549,7 +546,6 @@ static int imxdma_xfer_desc(struct imxdma_desc *d) imxdmac->slot_2d = slot; imxdmac->enabled_2d = true; - spin_unlock_irqrestore(&imxdma->lock, flags); if (slot == IMX_DMA_2D_SLOT_A) { d->config_mem &= ~CCR_MSEL_B; @@ -625,8 +621,9 @@ static void imxdma_tasklet(unsigned long data) struct imxdma_channel *imxdmac = (void *)data; struct imxdma_engine *imxdma = imxdmac->imxdma; struct imxdma_desc *desc; + unsigned long flags; - spin_lock(&imxdma->lock); + spin_lock_irqsave(&imxdma->lock, flags); if (list_empty(&imxdmac->ld_active)) { /* Someone might have called terminate all */ @@ -663,7 +660,7 @@ static void imxdma_tasklet(unsigned long data) __func__, imxdmac->channel); } out: - spin_unlock(&imxdma->lock); + spin_unlock_irqrestore(&imxdma->lock, flags); } static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, From fcaaba6c7136fe47e5a13352f99a64b019b6d2c5 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Tue, 17 Sep 2013 15:56:08 +0200 Subject: [PATCH 362/459] dmaengine: imx-dma: fix callback path in tasklet We need to free the ld_active list head before jumping into the callback routine. Otherwise the callback could run into issue_pending and change our ld_active list head we just going to free. This will run the channel list into an currupted and undefined state. Signed-off-by: Michael Grzeschik Signed-off-by: Vinod Koul --- drivers/dma/imx-dma.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index 247aa7cae37c..55852c026791 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -627,13 +627,11 @@ static void imxdma_tasklet(unsigned long data) if (list_empty(&imxdmac->ld_active)) { /* Someone might have called terminate all */ - goto out; + spin_unlock_irqrestore(&imxdma->lock, flags); + return; } desc = list_first_entry(&imxdmac->ld_active, struct imxdma_desc, node); - if (desc->desc.callback) - desc->desc.callback(desc->desc.callback_param); - /* If we are dealing with a cyclic descriptor, keep it on ld_active * and dont mark the descriptor as complete. * Only in non-cyclic cases it would be marked as complete @@ -661,6 +659,10 @@ static void imxdma_tasklet(unsigned long data) } out: spin_unlock_irqrestore(&imxdma->lock, flags); + + if (desc->desc.callback) + desc->desc.callback(desc->desc.callback_param); + } static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, From 0dbc6078c06bc002bfacf95f33960b1901c663f5 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 3 Oct 2013 11:59:14 +0200 Subject: [PATCH 363/459] x86, build, pci: Fix PCI_MSI build on !SMP Commit ebd97be635 ('PCI: remove ARCH_SUPPORTS_MSI kconfig option') removed the ARCH_SUPPORTS_MSI option which architectures could select to indicate that they support MSI. Now, all architectures are supposed to build fine when MSI support is enabled: instead of having the architecture tell *when* MSI support can be used, it's up to the architecture code to ensure that MSI support can be enabled. On x86, commit ebd97be635 removed the following line: select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) Which meant that MSI support was only available when the local APIC and I/O APIC were enabled. While this is always true on SMP or x86-64, it is not necessarily the case on i386 !SMP. The below patch makes sure that the local APIC and I/O APIC support is always enabled when MSI support is enabled. To do so, it: * Ensures the X86_UP_APIC option is not visible when PCI_MSI is enabled. This is the option that allows, on UP machines, to enable or not the APIC support. It is already not visible on SMP systems, or x86-64 systems, for example. We're simply also making it invisible on i386 MSI systems. * Ensures that the X86_LOCAL_APIC and X86_IO_APIC options are 'y' when PCI_MSI is enabled. Notice that this change requires a change in drivers/iommu/Kconfig to avoid a recursive Kconfig dependencey. The AMD_IOMMU option selects PCI_MSI, but was depending on X86_IO_APIC. This dependency is no longer needed: as soon as PCI_MSI is selected, the presence of X86_IO_APIC is guaranteed. Moreover, the AMD_IOMMU already depended on X86_64, which already guaranteed that X86_IO_APIC was enabled, so this dependency was anyway redundant. Signed-off-by: Thomas Petazzoni Link: http://lkml.kernel.org/r/1380794354-9079-1-git-send-email-thomas.petazzoni@free-electrons.com Reported-by: Konrad Rzeszutek Wilk Acked-by: Bjorn Helgaas Signed-off-by: H. Peter Anvin --- arch/x86/Kconfig | 6 +++--- drivers/iommu/Kconfig | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index ee2fb9d37745..145d703227bf 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -860,7 +860,7 @@ source "kernel/Kconfig.preempt" config X86_UP_APIC bool "Local APIC support on uniprocessors" - depends on X86_32 && !SMP && !X86_32_NON_STANDARD + depends on X86_32 && !SMP && !X86_32_NON_STANDARD && !PCI_MSI ---help--- A local APIC (Advanced Programmable Interrupt Controller) is an integrated interrupt controller in the CPU. If you have a single-CPU @@ -885,11 +885,11 @@ config X86_UP_IOAPIC config X86_LOCAL_APIC def_bool y - depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC + depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI config X86_IO_APIC def_bool y - depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC + depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI config X86_VISWS_APIC def_bool y diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index fe302e33f72e..c880ebaf1553 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -52,7 +52,7 @@ config AMD_IOMMU select PCI_PRI select PCI_PASID select IOMMU_API - depends on X86_64 && PCI && ACPI && X86_IO_APIC + depends on X86_64 && PCI && ACPI ---help--- With this option you can enable support for AMD IOMMU hardware in your system. An IOMMU is a hardware component which provides From 6adb0b0ae26fcc35cfec068d71f13863faac5b44 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sun, 22 Sep 2013 19:44:59 -0600 Subject: [PATCH 364/459] perf tools: Add default handler for mmap2 events Commands that do not implement an mmap2 handler should at least not die with a segfault when processing files with MMAP2 events. Signed-off-by: David Ahern Link: http://lkml.kernel.org/r/1379900700-5186-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/session.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index 70ffa41518f3..37c4718f6be1 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -256,6 +256,8 @@ void perf_tool__fill_defaults(struct perf_tool *tool) tool->sample = process_event_sample_stub; if (tool->mmap == NULL) tool->mmap = process_event_stub; + if (tool->mmap2 == NULL) + tool->mmap2 = process_event_stub; if (tool->comm == NULL) tool->comm = process_event_stub; if (tool->fork == NULL) From d20a47e70b57a77f4d1b0dba98a668e14c2f9bf9 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 30 Sep 2013 18:01:11 +0900 Subject: [PATCH 365/459] perf stat: Set child_pid after perf_evlist__prepare_workload() The commit acf2892270dc ("perf stat: Use perf_evlist__prepare/ start_workload()") converted to use the function but forgot to update child_pid. Fix it. Signed-off-by: Namhyung Kim Cc: David Ahern Cc: Ingo Molnar Cc: Jiri Olsa Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/1380531671-28076-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-stat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index f686d5ff594e..5098f144b92d 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -457,6 +457,7 @@ static int __run_perf_stat(int argc, const char **argv) perror("failed to prepare workload"); return -1; } + child_pid = evsel_list->workload.pid; } if (group) From 47a92b828639dcb1a6033cd0a441099df828b7a9 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 2 Oct 2013 18:25:26 -0300 Subject: [PATCH 366/459] perf tools: Fix libaudit test MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In ubuntu systems the libaudit test was always failing due to the newline in the printf call not being escaped, which somehow didn't prevented the test from working as expected on other systems, such as fedora18. Fix it by removing the newline, as this is just a test, that program is just a compile test. The error messages, obtained using 'make V=1': CHK libaudit : In function ‘main’: :5:9: error: missing terminating " character [-Werror] :5:2: error: missing terminating " character :6:1: error: missing terminating " character [-Werror] :6:1: error: missing terminating " character :7:2: error: expected expression before ‘return’ :8:1: error: expected ‘;’ before ‘}’ token cc1: all warnings being treated as errors config/Makefile:241: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev After this change the test works as expected in all systems tested and the 'trace' tool is built when the needed devel packages are installed. Cc: Adrian Hunter Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-0trw8qs9hafeopc0vj1sicay@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/config/feature-tests.mak | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/config/feature-tests.mak b/tools/perf/config/feature-tests.mak index d5a8dd44945f..f79305739ecc 100644 --- a/tools/perf/config/feature-tests.mak +++ b/tools/perf/config/feature-tests.mak @@ -219,7 +219,7 @@ define SOURCE_LIBAUDIT int main(void) { - printf(\"error message: %s\n\", audit_errno_to_name(0)); + printf(\"error message: %s\", audit_errno_to_name(0)); return audit_open(); } endef From e08cfd4bda7683cdbe6971c26cf23e2afdb1e7a8 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Mon, 30 Sep 2013 18:21:44 +0900 Subject: [PATCH 367/459] perf probe: Fix to find line information for probe list Fix to find the correct (as much as possible) line information for listing probes. Without this fix, perf probe --list action will show incorrect line information as below; probe:getname_flags (on getname_flags@ksrc/linux-3/fs/namei.c) probe:getname_flags_1 (on getname:-89@x86/include/asm/current.h) probe:getname_flags_2 (on user_path_at_empty:-2054@x86/include/asm/current.h) The minus line number is obviously wrong, and current.h is not related to the probe point. Deeper investigation discovered that there were 2 issues related to this bug, and minor typos too. The 1st issue is the rack of considering about nested inlined functions, which causes the wrong (relative) line number. The 2nd issue is that the dwarf line info is not correct at those points. It points 14th line of current.h. Since it seems that the line info includes somewhat unreliable information, this fixes perf to try to find correct line information from both of debuginfo and line info as below. 1) Probe address is the entry of a function instance In this case, the line is set as the function declared line. 2) Probe address is the entry of an expanded inline function block In this case, the line is set as the function call-site line. This means that the line number is relative from the entry line of caller function (which can be an inlined function if nested) 3) Probe address is inside a function instance or an expanded inline function block In this case, perf probe queries the line number from lineinfo and verify the function declared file is same as the file name queried from lineinfo. If the file name is different, it is a failure case. The probe address is shown as symbol+offset. 4) Probe address is not in the any function instance This is a failure case, the probe address is shown as symbol+offset. With this fix, perf probe -l shows correct probe lines as below; probe:getname_flags (on getname_flags@ksrc/linux-3/fs/namei.c) probe:getname_flags_1 (on getname:2@ksrc/linux-3/fs/namei.c) probe:getname_flags_2 (on user_path_at_empty:4@ksrc/linux-3/fs/namei.c) Changes at v2: - Fix typos in the function comments. (Thanks to Namhyung Kim) - Use die_find_top_inlinefunc instead of die_find_inlinefunc_next. Signed-off-by: Masami Hiramatsu Cc: Ingo Molnar Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20130930092144.1693.11058.stgit@udc4-manage.rcp.hitachi.co.jp Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/dwarf-aux.c | 27 +++++++++++++++---- tools/perf/util/dwarf-aux.h | 6 ++++- tools/perf/util/probe-finder.c | 49 +++++++++++++++++++++++----------- 3 files changed, 60 insertions(+), 22 deletions(-) diff --git a/tools/perf/util/dwarf-aux.c b/tools/perf/util/dwarf-aux.c index e23bde19d590..7defd77105d0 100644 --- a/tools/perf/util/dwarf-aux.c +++ b/tools/perf/util/dwarf-aux.c @@ -426,7 +426,7 @@ static int __die_search_func_cb(Dwarf_Die *fn_die, void *data) * @die_mem: a buffer for result DIE * * Search a non-inlined function DIE which includes @addr. Stores the - * DIE to @die_mem and returns it if found. Returns NULl if failed. + * DIE to @die_mem and returns it if found. Returns NULL if failed. */ Dwarf_Die *die_find_realfunc(Dwarf_Die *cu_die, Dwarf_Addr addr, Dwarf_Die *die_mem) @@ -454,15 +454,32 @@ static int __die_find_inline_cb(Dwarf_Die *die_mem, void *data) } /** - * die_find_inlinefunc - Search an inlined function at given address - * @cu_die: a CU DIE which including @addr + * die_find_top_inlinefunc - Search the top inlined function at given address + * @sp_die: a subprogram DIE which including @addr * @addr: target address * @die_mem: a buffer for result DIE * * Search an inlined function DIE which includes @addr. Stores the - * DIE to @die_mem and returns it if found. Returns NULl if failed. + * DIE to @die_mem and returns it if found. Returns NULL if failed. + * Even if several inlined functions are expanded recursively, this + * doesn't trace it down, and returns the topmost one. + */ +Dwarf_Die *die_find_top_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr, + Dwarf_Die *die_mem) +{ + return die_find_child(sp_die, __die_find_inline_cb, &addr, die_mem); +} + +/** + * die_find_inlinefunc - Search an inlined function at given address + * @sp_die: a subprogram DIE which including @addr + * @addr: target address + * @die_mem: a buffer for result DIE + * + * Search an inlined function DIE which includes @addr. Stores the + * DIE to @die_mem and returns it if found. Returns NULL if failed. * If several inlined functions are expanded recursively, this trace - * it and returns deepest one. + * it down and returns deepest one. */ Dwarf_Die *die_find_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr, Dwarf_Die *die_mem) diff --git a/tools/perf/util/dwarf-aux.h b/tools/perf/util/dwarf-aux.h index 8658d41697d2..b4fe90c6cb2d 100644 --- a/tools/perf/util/dwarf-aux.h +++ b/tools/perf/util/dwarf-aux.h @@ -79,7 +79,11 @@ extern Dwarf_Die *die_find_child(Dwarf_Die *rt_die, extern Dwarf_Die *die_find_realfunc(Dwarf_Die *cu_die, Dwarf_Addr addr, Dwarf_Die *die_mem); -/* Search an inlined function including given address */ +/* Search the top inlined function including given address */ +extern Dwarf_Die *die_find_top_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr, + Dwarf_Die *die_mem); + +/* Search the deepest inlined function including given address */ extern Dwarf_Die *die_find_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr, Dwarf_Die *die_mem); diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index 371476cb8ddc..c09e0a9fdf4c 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -1327,8 +1327,8 @@ int debuginfo__find_probe_point(struct debuginfo *self, unsigned long addr, struct perf_probe_point *ppt) { Dwarf_Die cudie, spdie, indie; - Dwarf_Addr _addr, baseaddr; - const char *fname = NULL, *func = NULL, *tmp; + Dwarf_Addr _addr = 0, baseaddr = 0; + const char *fname = NULL, *func = NULL, *basefunc = NULL, *tmp; int baseline = 0, lineno = 0, ret = 0; /* Adjust address with bias */ @@ -1349,27 +1349,36 @@ int debuginfo__find_probe_point(struct debuginfo *self, unsigned long addr, /* Find a corresponding function (name, baseline and baseaddr) */ if (die_find_realfunc(&cudie, (Dwarf_Addr)addr, &spdie)) { /* Get function entry information */ - tmp = dwarf_diename(&spdie); - if (!tmp || + func = basefunc = dwarf_diename(&spdie); + if (!func || dwarf_entrypc(&spdie, &baseaddr) != 0 || - dwarf_decl_line(&spdie, &baseline) != 0) + dwarf_decl_line(&spdie, &baseline) != 0) { + lineno = 0; goto post; - func = tmp; + } - if (addr == (unsigned long)baseaddr) + if (addr == (unsigned long)baseaddr) { /* Function entry - Relative line number is 0 */ lineno = baseline; - else if (die_find_inlinefunc(&spdie, (Dwarf_Addr)addr, - &indie)) { + fname = dwarf_decl_file(&spdie); + goto post; + } + + /* Track down the inline functions step by step */ + while (die_find_top_inlinefunc(&spdie, (Dwarf_Addr)addr, + &indie)) { + /* There is an inline function */ if (dwarf_entrypc(&indie, &_addr) == 0 && - _addr == addr) + _addr == addr) { /* * addr is at an inline function entry. * In this case, lineno should be the call-site - * line number. + * line number. (overwrite lineinfo) */ lineno = die_get_call_lineno(&indie); - else { + fname = die_get_call_file(&indie); + break; + } else { /* * addr is in an inline function body. * Since lineno points one of the lines @@ -1377,19 +1386,27 @@ int debuginfo__find_probe_point(struct debuginfo *self, unsigned long addr, * be the entry line of the inline function. */ tmp = dwarf_diename(&indie); - if (tmp && - dwarf_decl_line(&spdie, &baseline) == 0) - func = tmp; + if (!tmp || + dwarf_decl_line(&indie, &baseline) != 0) + break; + func = tmp; + spdie = indie; } } + /* Verify the lineno and baseline are in a same file */ + tmp = dwarf_decl_file(&spdie); + if (!tmp || strcmp(tmp, fname) != 0) + lineno = 0; } post: /* Make a relative line number or an offset */ if (lineno) ppt->line = lineno - baseline; - else if (func) + else if (basefunc) { ppt->offset = addr - (unsigned long)baseaddr; + func = basefunc; + } /* Duplicate strings */ if (func) { From 027a7e86a17fb2d172f4eb17cd6b0e9f139224fd Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 4 Oct 2013 10:24:17 -0300 Subject: [PATCH 368/459] perf tools: Fix installation of libexec components Doing a fresh install on a user home directory needs to first make sure that the ~/libexec/perf-core/ directory is present so that 'perf-archive' like scripts, 'perf test' attr config files and 'perf script' scripts can be installed. Cc: Adrian Hunter Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-z7ryi3r1b9dn9smbfnab0fdc@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 3a0ff7fb71b6..64c043b7a438 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -770,6 +770,7 @@ check: $(OUTPUT)common-cmds.h install-bin: all $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)' $(INSTALL) $(OUTPUT)perf '$(DESTDIR_SQ)$(bindir_SQ)' + $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)' $(INSTALL) $(OUTPUT)perf-archive -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)' ifndef NO_LIBPERL $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace' From b314e5cfd11fd78545ce6c2be42646254390c1aa Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 30 Sep 2013 17:19:48 +0900 Subject: [PATCH 369/459] perf session: Fix infinite loop on invalid perf.data file perf-record updates the header in the perf.data file at termination. Without this update perf-report (and other processing built-ins) it caused an infinite loop when perf report (or something like) called. This is because the algorithm in __perf_session__process_events() depends on the data_size which is read from file header. Use file size directly instead in this case to do the best-effort processing. Signed-off-by: Namhyung Kim Tested-by: David Ahern Tested-by: Sonny Rao Acked-by: Ingo Molnar Cc: David Ahern Cc: Ingo Molnar Cc: Jiri Olsa Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Sonny Rao Link: http://lkml.kernel.org/r/1380529188-27193-1-git-send-email-namhyung@kernel.org Signed-off-by: David Ahern [ Reworded warning as per Ingo Molnar suggestion, replaces 'perf.data' with session->filename, to precisely identify the data file involved ] Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/header.c | 12 ++++++++++++ tools/perf/util/session.c | 2 +- 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index ce69901176d8..c3e5a3b817ab 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -2768,6 +2768,18 @@ int perf_session__read_header(struct perf_session *session) if (perf_file_header__read(&f_header, header, fd) < 0) return -EINVAL; + /* + * Sanity check that perf.data was written cleanly; data size is + * initialized to 0 and updated only if the on_exit function is run. + * If data size is still 0 then the file contains only partial + * information. Just warn user and process it as much as it can. + */ + if (f_header.data.size == 0) { + pr_warning("WARNING: The %s file's data size field is 0 which is unexpected.\n" + "Was the 'perf record' command properly terminated?\n", + session->filename); + } + nr_attrs = f_header.attrs.size / f_header.attr_size; lseek(fd, f_header.attrs.offset, SEEK_SET); diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index 37c4718f6be1..568b750c01f6 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -1312,7 +1312,7 @@ int __perf_session__process_events(struct perf_session *session, file_offset = page_offset; head = data_offset - page_offset; - if (data_offset + data_size < file_size) + if (data_size && (data_offset + data_size < file_size)) file_size = data_offset + data_size; progress_next = file_size / 16; From 89c6c89af2ef41cb127c9694ef7783e585e96337 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 30 Sep 2013 09:37:03 +1000 Subject: [PATCH 370/459] xfs: lockdep needs to know about 3 dquot-deep nesting Michael Semon reported that xfs/299 generated this lockdep warning: ============================================= [ INFO: possible recursive locking detected ] 3.12.0-rc2+ #2 Not tainted --------------------------------------------- touch/21072 is trying to acquire lock: (&xfs_dquot_other_class){+.+...}, at: [] xfs_trans_dqlockedjoin+0x57/0x64 but task is already holding lock: (&xfs_dquot_other_class){+.+...}, at: [] xfs_trans_dqlockedjoin+0x57/0x64 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&xfs_dquot_other_class); lock(&xfs_dquot_other_class); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by touch/21072: #0: (sb_writers#10){++++.+}, at: [] mnt_want_write+0x1e/0x3e #1: (&type->i_mutex_dir_key#4){+.+.+.}, at: [] do_last+0x245/0xe40 #2: (sb_internal#2){++++.+}, at: [] xfs_trans_alloc+0x1f/0x35 #3: (&(&ip->i_lock)->mr_lock/1){+.+...}, at: [] xfs_ilock+0x100/0x1f1 #4: (&(&ip->i_lock)->mr_lock){++++-.}, at: [] xfs_ilock_nowait+0x105/0x22f #5: (&dqp->q_qlock){+.+...}, at: [] xfs_trans_dqlockedjoin+0x57/0x64 #6: (&xfs_dquot_other_class){+.+...}, at: [] xfs_trans_dqlockedjoin+0x57/0x64 The lockdep annotation for dquot lock nesting only understands locking for user and "other" dquots, not user, group and quota dquots. Fix the annotations to match the locking heirarchy we now have. Reported-by: Michael L. Semon Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit f112a049712a5c07de25d511c3c6587a2b1a015e) --- fs/xfs/xfs_dquot.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c index 71520e6e5d65..1ee776d477c3 100644 --- a/fs/xfs/xfs_dquot.c +++ b/fs/xfs/xfs_dquot.c @@ -64,7 +64,8 @@ int xfs_dqerror_mod = 33; struct kmem_zone *xfs_qm_dqtrxzone; static struct kmem_zone *xfs_qm_dqzone; -static struct lock_class_key xfs_dquot_other_class; +static struct lock_class_key xfs_dquot_group_class; +static struct lock_class_key xfs_dquot_project_class; /* * This is called to free all the memory associated with a dquot @@ -703,8 +704,20 @@ xfs_qm_dqread( * Make sure group quotas have a different lock class than user * quotas. */ - if (!(type & XFS_DQ_USER)) - lockdep_set_class(&dqp->q_qlock, &xfs_dquot_other_class); + switch (type) { + case XFS_DQ_USER: + /* uses the default lock class */ + break; + case XFS_DQ_GROUP: + lockdep_set_class(&dqp->q_qlock, &xfs_dquot_group_class); + break; + case XFS_DQ_PROJ: + lockdep_set_class(&dqp->q_qlock, &xfs_dquot_project_class); + break; + default: + ASSERT(0); + break; + } XFS_STATS_INC(xs_qm_dquot); From 6d313498f035abc9d8ad3a1b3295f133bfab9638 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 30 Sep 2013 09:37:04 +1000 Subject: [PATCH 371/459] xfs: dirent dtype presence is dependent on directory magic numbers The determination of whether a directory entry contains a dtype field originally was dependent on the filesystem having CRCs enabled. This meant that the format for dtype beign enabled could be determined by checking the directory block magic number rather than doing a feature bit check. This was useful in that it meant that we didn't need to pass a struct xfs_mount around to functions that were already supplied with a directory block header. Unfortunately, the introduction of dtype fields into the v4 structure via a feature bit meant this "use the directory block magic number" method of discriminating the dirent entry sizes is broken. Hence we need to convert the places that use magic number checks to use feature bit checks so that they work correctly and not by chance. The current code works on v4 filesystems only because the dirent size roundup covers the extra byte needed by the dtype field in the places where this problem occurs. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 367993e7c6428cb7617ab7653d61dca54e2fdede) --- fs/xfs/xfs_dir2_block.c | 6 ++--- fs/xfs/xfs_dir2_format.h | 51 +++++++++++++++------------------------ fs/xfs/xfs_dir2_readdir.c | 4 +-- fs/xfs/xfs_dir2_sf.c | 6 ++--- 4 files changed, 28 insertions(+), 39 deletions(-) diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c index 0957aa98b6c0..12dad188939d 100644 --- a/fs/xfs/xfs_dir2_block.c +++ b/fs/xfs/xfs_dir2_block.c @@ -1158,7 +1158,7 @@ xfs_dir2_sf_to_block( /* * Create entry for . */ - dep = xfs_dir3_data_dot_entry_p(hdr); + dep = xfs_dir3_data_dot_entry_p(mp, hdr); dep->inumber = cpu_to_be64(dp->i_ino); dep->namelen = 1; dep->name[0] = '.'; @@ -1172,7 +1172,7 @@ xfs_dir2_sf_to_block( /* * Create entry for .. */ - dep = xfs_dir3_data_dotdot_entry_p(hdr); + dep = xfs_dir3_data_dotdot_entry_p(mp, hdr); dep->inumber = cpu_to_be64(xfs_dir2_sf_get_parent_ino(sfp)); dep->namelen = 2; dep->name[0] = dep->name[1] = '.'; @@ -1183,7 +1183,7 @@ xfs_dir2_sf_to_block( blp[1].hashval = cpu_to_be32(xfs_dir_hash_dotdot); blp[1].address = cpu_to_be32(xfs_dir2_byte_to_dataptr(mp, (char *)dep - (char *)hdr)); - offset = xfs_dir3_data_first_offset(hdr); + offset = xfs_dir3_data_first_offset(mp); /* * Loop over existing entries, stuff them in. */ diff --git a/fs/xfs/xfs_dir2_format.h b/fs/xfs/xfs_dir2_format.h index a0961a61ac1a..9cf67381adf6 100644 --- a/fs/xfs/xfs_dir2_format.h +++ b/fs/xfs/xfs_dir2_format.h @@ -497,69 +497,58 @@ xfs_dir3_data_unused_p(struct xfs_dir2_data_hdr *hdr) /* * Offsets of . and .. in data space (always block 0) * - * The macros are used for shortform directories as they have no headers to read - * the magic number out of. Shortform directories need to know the size of the - * data block header because the sfe embeds the block offset of the entry into - * it so that it doesn't change when format conversion occurs. Bad Things Happen - * if we don't follow this rule. - * * XXX: there is scope for significant optimisation of the logic here. Right * now we are checking for "dir3 format" over and over again. Ideally we should * only do it once for each operation. */ -#define XFS_DIR3_DATA_DOT_OFFSET(mp) \ - xfs_dir3_data_hdr_size(xfs_sb_version_hascrc(&(mp)->m_sb)) -#define XFS_DIR3_DATA_DOTDOT_OFFSET(mp) \ - (XFS_DIR3_DATA_DOT_OFFSET(mp) + xfs_dir3_data_entsize(mp, 1)) -#define XFS_DIR3_DATA_FIRST_OFFSET(mp) \ - (XFS_DIR3_DATA_DOTDOT_OFFSET(mp) + xfs_dir3_data_entsize(mp, 2)) - static inline xfs_dir2_data_aoff_t -xfs_dir3_data_dot_offset(struct xfs_dir2_data_hdr *hdr) +xfs_dir3_data_dot_offset(struct xfs_mount *mp) { - return xfs_dir3_data_entry_offset(hdr); + return xfs_dir3_data_hdr_size(xfs_sb_version_hascrc(&mp->m_sb)); } static inline xfs_dir2_data_aoff_t -xfs_dir3_data_dotdot_offset(struct xfs_dir2_data_hdr *hdr) +xfs_dir3_data_dotdot_offset(struct xfs_mount *mp) { - bool dir3 = hdr->magic == cpu_to_be32(XFS_DIR3_DATA_MAGIC) || - hdr->magic == cpu_to_be32(XFS_DIR3_BLOCK_MAGIC); - return xfs_dir3_data_dot_offset(hdr) + - __xfs_dir3_data_entsize(dir3, 1); + return xfs_dir3_data_dot_offset(mp) + + xfs_dir3_data_entsize(mp, 1); } static inline xfs_dir2_data_aoff_t -xfs_dir3_data_first_offset(struct xfs_dir2_data_hdr *hdr) +xfs_dir3_data_first_offset(struct xfs_mount *mp) { - bool dir3 = hdr->magic == cpu_to_be32(XFS_DIR3_DATA_MAGIC) || - hdr->magic == cpu_to_be32(XFS_DIR3_BLOCK_MAGIC); - return xfs_dir3_data_dotdot_offset(hdr) + - __xfs_dir3_data_entsize(dir3, 2); + return xfs_dir3_data_dotdot_offset(mp) + + xfs_dir3_data_entsize(mp, 2); } /* * location of . and .. in data space (always block 0) */ static inline struct xfs_dir2_data_entry * -xfs_dir3_data_dot_entry_p(struct xfs_dir2_data_hdr *hdr) +xfs_dir3_data_dot_entry_p( + struct xfs_mount *mp, + struct xfs_dir2_data_hdr *hdr) { return (struct xfs_dir2_data_entry *) - ((char *)hdr + xfs_dir3_data_dot_offset(hdr)); + ((char *)hdr + xfs_dir3_data_dot_offset(mp)); } static inline struct xfs_dir2_data_entry * -xfs_dir3_data_dotdot_entry_p(struct xfs_dir2_data_hdr *hdr) +xfs_dir3_data_dotdot_entry_p( + struct xfs_mount *mp, + struct xfs_dir2_data_hdr *hdr) { return (struct xfs_dir2_data_entry *) - ((char *)hdr + xfs_dir3_data_dotdot_offset(hdr)); + ((char *)hdr + xfs_dir3_data_dotdot_offset(mp)); } static inline struct xfs_dir2_data_entry * -xfs_dir3_data_first_entry_p(struct xfs_dir2_data_hdr *hdr) +xfs_dir3_data_first_entry_p( + struct xfs_mount *mp, + struct xfs_dir2_data_hdr *hdr) { return (struct xfs_dir2_data_entry *) - ((char *)hdr + xfs_dir3_data_first_offset(hdr)); + ((char *)hdr + xfs_dir3_data_first_offset(mp)); } /* diff --git a/fs/xfs/xfs_dir2_readdir.c b/fs/xfs/xfs_dir2_readdir.c index 8993ec17452c..8f84153e98a8 100644 --- a/fs/xfs/xfs_dir2_readdir.c +++ b/fs/xfs/xfs_dir2_readdir.c @@ -119,9 +119,9 @@ xfs_dir2_sf_getdents( * mp->m_dirdatablk. */ dot_offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk, - XFS_DIR3_DATA_DOT_OFFSET(mp)); + xfs_dir3_data_dot_offset(mp)); dotdot_offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk, - XFS_DIR3_DATA_DOTDOT_OFFSET(mp)); + xfs_dir3_data_dotdot_offset(mp)); /* * Put . entry unless we're starting past it. diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c index bb6e2848f473..3ef6d402084c 100644 --- a/fs/xfs/xfs_dir2_sf.c +++ b/fs/xfs/xfs_dir2_sf.c @@ -557,7 +557,7 @@ xfs_dir2_sf_addname_hard( * to insert the new entry. * If it's going to end up at the end then oldsfep will point there. */ - for (offset = XFS_DIR3_DATA_FIRST_OFFSET(mp), + for (offset = xfs_dir3_data_first_offset(mp), oldsfep = xfs_dir2_sf_firstentry(oldsfp), add_datasize = xfs_dir3_data_entsize(mp, args->namelen), eof = (char *)oldsfep == &buf[old_isize]; @@ -640,7 +640,7 @@ xfs_dir2_sf_addname_pick( sfp = (xfs_dir2_sf_hdr_t *)dp->i_df.if_u1.if_data; size = xfs_dir3_data_entsize(mp, args->namelen); - offset = XFS_DIR3_DATA_FIRST_OFFSET(mp); + offset = xfs_dir3_data_first_offset(mp); sfep = xfs_dir2_sf_firstentry(sfp); holefit = 0; /* @@ -713,7 +713,7 @@ xfs_dir2_sf_check( mp = dp->i_mount; sfp = (xfs_dir2_sf_hdr_t *)dp->i_df.if_u1.if_data; - offset = XFS_DIR3_DATA_FIRST_OFFSET(mp); + offset = xfs_dir3_data_first_offset(mp); ino = xfs_dir2_sf_get_parent_ino(sfp); i8count = ino > XFS_DIR2_MAX_SHORT_INUM; From 9b3b77fe661875f19ed748b67fb1eeb57d602b7e Mon Sep 17 00:00:00 2001 From: "tinguely@sgi.com" Date: Fri, 27 Sep 2013 09:00:55 -0500 Subject: [PATCH 372/459] xfs: fix memory leak in xlog_recover_add_to_trans Free the memory in error path of xlog_recover_add_to_trans(). Normally this memory is freed in recovery pass2, but is leaked in the error path. Signed-off-by: Mark Tinguely Reviewed-by: Eric Sandeen Signed-off-by: Ben Myers (cherry picked from commit 519ccb81ac1c8e3e4eed294acf93be00b43dcad6) --- fs/xfs/xfs_log_recover.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index cc179878fe41..43240583fd5b 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1585,6 +1585,7 @@ xlog_recover_add_to_trans( "bad number of regions (%d) in inode log format", in_f->ilf_size); ASSERT(0); + free(ptr); return XFS_ERROR(EIO); } From b2a42f78ab475f4730300b0e9568bc3b2587d112 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 1 Oct 2013 16:47:53 +0200 Subject: [PATCH 373/459] xfs: Use kmem_free() instead of free() This fixes a build failure caused by calling the free() function which does not exist in the Linux kernel. Signed-off-by: Thierry Reding Reviewed-by: Mark Tinguely Signed-off-by: Ben Myers (cherry picked from commit aaaae98022efa4f3c31042f1fdf9e7a0c5f04663) --- fs/xfs/xfs_log_recover.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 43240583fd5b..39797490a1f1 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1585,7 +1585,7 @@ xlog_recover_add_to_trans( "bad number of regions (%d) in inode log format", in_f->ilf_size); ASSERT(0); - free(ptr); + kmem_free(ptr); return XFS_ERROR(EIO); } From 19e49834d22c2271ed1f4a03aaa4b74986447fb4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 4 Oct 2013 12:54:11 -0700 Subject: [PATCH 374/459] selinux: remove 'flags' parameter from inode_has_perm Every single user passes in '0'. I think we had non-zero users back in some stone age when selinux_inode_permission() was implemented in terms of inode_has_perm(), but that complicated case got split up into a totally separate code-path so that we could optimize the much simpler special cases. See commit 2e33405785d3 ("SELinux: delay initialization of audit data in selinux_inode_permission") for example. Signed-off-by: Linus Torvalds --- security/selinux/hooks.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index a5091ec06aa6..967823212d7d 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1525,8 +1525,7 @@ static int task_has_system(struct task_struct *tsk, static int inode_has_perm(const struct cred *cred, struct inode *inode, u32 perms, - struct common_audit_data *adp, - unsigned flags) + struct common_audit_data *adp) { struct inode_security_struct *isec; u32 sid; @@ -1539,7 +1538,7 @@ static int inode_has_perm(const struct cred *cred, sid = cred_sid(cred); isec = inode->i_security; - return avc_has_perm_flags(sid, isec->sid, isec->sclass, perms, adp, flags); + return avc_has_perm(sid, isec->sid, isec->sclass, perms, adp); } /* Same as inode_has_perm, but pass explicit audit data containing @@ -1554,7 +1553,7 @@ static inline int dentry_has_perm(const struct cred *cred, ad.type = LSM_AUDIT_DATA_DENTRY; ad.u.dentry = dentry; - return inode_has_perm(cred, inode, av, &ad, 0); + return inode_has_perm(cred, inode, av, &ad); } /* Same as inode_has_perm, but pass explicit audit data containing @@ -1569,7 +1568,7 @@ static inline int path_has_perm(const struct cred *cred, ad.type = LSM_AUDIT_DATA_PATH; ad.u.path = *path; - return inode_has_perm(cred, inode, av, &ad, 0); + return inode_has_perm(cred, inode, av, &ad); } /* Same as path_has_perm, but uses the inode from the file struct. */ @@ -1581,7 +1580,7 @@ static inline int file_path_has_perm(const struct cred *cred, ad.type = LSM_AUDIT_DATA_PATH; ad.u.path = file->f_path; - return inode_has_perm(cred, file_inode(file), av, &ad, 0); + return inode_has_perm(cred, file_inode(file), av, &ad); } /* Check whether a task can use an open file descriptor to @@ -1617,7 +1616,7 @@ static int file_has_perm(const struct cred *cred, /* av is zero if only checking access to the descriptor. */ rc = 0; if (av) - rc = inode_has_perm(cred, inode, av, &ad, 0); + rc = inode_has_perm(cred, inode, av, &ad); out: return rc; From 60e7cd3a4ba6049ef590921e84454e6cfd9e2589 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 30 Sep 2013 14:10:43 -0400 Subject: [PATCH 375/459] Btrfs: fix transid verify errors when recovering log tree If we crash with a log, remount and recover that log, and then crash before we can commit another transaction we will get transid verify errors on the next mount. This is because we were not zero'ing out the log when we committed the transaction after recovery. This is ok as long as we commit another transaction at some point in the future, but if you abort or something else goes wrong you can end up in this weird state because the recovery stuff says that the tree log should have a generation+1 of the super generation, which won't be the case of the transaction that was started for recovery. Fix this by removing the check and _always_ zero out the log portion of the super when we commit a transaction. This fixes the transid verify issues I was seeing with my force errors tests. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/transaction.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index e7a95356df83..8c81bdc1ef9b 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1838,11 +1838,8 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, assert_qgroups_uptodate(trans); update_super_roots(root); - if (!root->fs_info->log_root_recovering) { - btrfs_set_super_log_root(root->fs_info->super_copy, 0); - btrfs_set_super_log_root_level(root->fs_info->super_copy, 0); - } - + btrfs_set_super_log_root(root->fs_info->super_copy, 0); + btrfs_set_super_log_root_level(root->fs_info->super_copy, 0); memcpy(root->fs_info->super_for_commit, root->fs_info->super_copy, sizeof(*root->fs_info->super_copy)); From 385fe0bede52a45cd960f30c7eb8d20ad8e1e05b Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Tue, 1 Oct 2013 23:49:49 +0800 Subject: [PATCH 376/459] Btrfs: fix crash of compressed writes The crash[1] is found by xfstests/generic/208 with "-o compress", it's not reproduced everytime, but it does panic. The bug is quite interesting, it's actually introduced by a recent commit (573aecafca1cf7a974231b759197a1aebcf39c2a, Btrfs: actually limit the size of delalloc range). Btrfs implements delay allocation, so during writeback, we (1) get a page A and lock it (2) search the state tree for delalloc bytes and lock all pages within the range (3) process the delalloc range, including find disk space and create ordered extent and so on. (4) submit the page A. It runs well in normal cases, but if we're in a racy case, eg. buffered compressed writes and aio-dio writes, sometimes we may fail to lock all pages in the 'delalloc' range, in which case, we need to fall back to search the state tree again with a smaller range limit(max_bytes = PAGE_CACHE_SIZE - offset). The mentioned commit has a side effect, that is, in the fallback case, we can find delalloc bytes before the index of the page we already have locked, so we're in the case of (delalloc_end <= *start) and return with (found > 0). This ends with not locking delalloc pages but making ->writepage still process them, and the crash happens. This fixes it by just thinking that we find nothing and returning to caller as the caller knows how to deal with it properly. [1]: ------------[ cut here ]------------ kernel BUG at mm/page-writeback.c:2170! [...] CPU: 2 PID: 11755 Comm: btrfs-delalloc- Tainted: G O 3.11.0+ #8 [...] RIP: 0010:[] [] clear_page_dirty_for_io+0x1e/0x83 [...] [ 4934.248731] Stack: [ 4934.248731] ffff8801477e5dc8 ffffea00049b9f00 ffff8801869f9ce8 ffffffffa02b841a [ 4934.248731] 0000000000000000 0000000000000000 0000000000000fff 0000000000000620 [ 4934.248731] ffff88018db59c78 ffffea0005da8d40 ffffffffa02ff860 00000001810016c0 [ 4934.248731] Call Trace: [ 4934.248731] [] extent_range_clear_dirty_for_io+0xcf/0xf5 [btrfs] [ 4934.248731] [] compress_file_range+0x1dc/0x4cb [btrfs] [ 4934.248731] [] ? detach_if_pending+0x22/0x4b [ 4934.248731] [] async_cow_start+0x35/0x53 [btrfs] [ 4934.248731] [] worker_loop+0x14b/0x48c [btrfs] [ 4934.248731] [] ? btrfs_queue_worker+0x25c/0x25c [btrfs] [ 4934.248731] [] kthread+0x8d/0x95 [ 4934.248731] [] ? kthread_freezable_should_stop+0x43/0x43 [ 4934.248731] [] ret_from_fork+0x7c/0xb0 [ 4934.248731] [] ? kthread_freezable_should_stop+0x43/0x43 [ 4934.248731] Code: ff 85 c0 0f 94 c0 0f b6 c0 59 5b 5d c3 0f 1f 44 00 00 55 48 89 e5 41 54 53 48 89 fb e8 2c de 00 00 49 89 c4 48 8b 03 a8 01 75 02 <0f> 0b 4d 85 e4 74 52 49 8b 84 24 80 00 00 00 f6 40 20 01 75 44 [ 4934.248731] RIP [] clear_page_dirty_for_io+0x1e/0x83 [ 4934.248731] RSP [ 4934.280307] ---[ end trace 36f06d3f8750236a ]--- Signed-off-by: Liu Bo Signed-off-by: Josef Bacik --- fs/btrfs/extent_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index c09a40db53db..43feb4663f5b 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1614,7 +1614,7 @@ again: *start = delalloc_start; *end = delalloc_end; free_extent_state(cached_state); - return found; + return 0; } /* From 964fb15acfcd672ac691f04879b71f07ccc21e0c Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Wed, 2 Oct 2013 19:39:50 +0300 Subject: [PATCH 377/459] Btrfs: eliminate races in worker stopping code The current implementation of worker threads in Btrfs has races in worker stopping code, which cause all kinds of panics and lockups when running btrfs/011 xfstest in a loop. The problem is that btrfs_stop_workers is unsynchronized with respect to check_idle_worker, check_busy_worker and __btrfs_start_workers. E.g., check_idle_worker race flow: btrfs_stop_workers(): check_idle_worker(aworker): - grabs the lock - splices the idle list into the working list - removes the first worker from the working list - releases the lock to wait for its kthread's completion - grabs the lock - if aworker is on the working list, moves aworker from the working list to the idle list - releases the lock - grabs the lock - puts the worker - removes the second worker from the working list ...... btrfs_stop_workers returns, aworker is on the idle list FS is umounted, memory is freed ...... aworker is waken up, fireworks ensue With this applied, I wasn't able to trigger the problem in 48 hours, whereas previously I could reliably reproduce at least one of these races within an hour. Reported-by: David Sterba Signed-off-by: Ilya Dryomov Signed-off-by: Josef Bacik --- fs/btrfs/async-thread.c | 25 +++++++++++++++++++------ fs/btrfs/async-thread.h | 2 ++ 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c index 58b7d14b08ee..08cc08f037a6 100644 --- a/fs/btrfs/async-thread.c +++ b/fs/btrfs/async-thread.c @@ -107,7 +107,8 @@ static void check_idle_worker(struct btrfs_worker_thread *worker) worker->idle = 1; /* the list may be empty if the worker is just starting */ - if (!list_empty(&worker->worker_list)) { + if (!list_empty(&worker->worker_list) && + !worker->workers->stopping) { list_move(&worker->worker_list, &worker->workers->idle_list); } @@ -127,7 +128,8 @@ static void check_busy_worker(struct btrfs_worker_thread *worker) spin_lock_irqsave(&worker->workers->lock, flags); worker->idle = 0; - if (!list_empty(&worker->worker_list)) { + if (!list_empty(&worker->worker_list) && + !worker->workers->stopping) { list_move_tail(&worker->worker_list, &worker->workers->worker_list); } @@ -412,6 +414,7 @@ void btrfs_stop_workers(struct btrfs_workers *workers) int can_stop; spin_lock_irq(&workers->lock); + workers->stopping = 1; list_splice_init(&workers->idle_list, &workers->worker_list); while (!list_empty(&workers->worker_list)) { cur = workers->worker_list.next; @@ -455,6 +458,7 @@ void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max, workers->ordered = 0; workers->atomic_start_pending = 0; workers->atomic_worker_start = async_helper; + workers->stopping = 0; } /* @@ -480,15 +484,19 @@ static int __btrfs_start_workers(struct btrfs_workers *workers) atomic_set(&worker->num_pending, 0); atomic_set(&worker->refs, 1); worker->workers = workers; - worker->task = kthread_run(worker_loop, worker, - "btrfs-%s-%d", workers->name, - workers->num_workers + 1); + worker->task = kthread_create(worker_loop, worker, + "btrfs-%s-%d", workers->name, + workers->num_workers + 1); if (IS_ERR(worker->task)) { ret = PTR_ERR(worker->task); - kfree(worker); goto fail; } + spin_lock_irq(&workers->lock); + if (workers->stopping) { + spin_unlock_irq(&workers->lock); + goto fail_kthread; + } list_add_tail(&worker->worker_list, &workers->idle_list); worker->idle = 1; workers->num_workers++; @@ -496,8 +504,13 @@ static int __btrfs_start_workers(struct btrfs_workers *workers) WARN_ON(workers->num_workers_starting < 0); spin_unlock_irq(&workers->lock); + wake_up_process(worker->task); return 0; + +fail_kthread: + kthread_stop(worker->task); fail: + kfree(worker); spin_lock_irq(&workers->lock); workers->num_workers_starting--; spin_unlock_irq(&workers->lock); diff --git a/fs/btrfs/async-thread.h b/fs/btrfs/async-thread.h index 063698b90ce2..1f26792683ed 100644 --- a/fs/btrfs/async-thread.h +++ b/fs/btrfs/async-thread.h @@ -107,6 +107,8 @@ struct btrfs_workers { /* extra name for this worker, used for current->name */ char *name; + + int stopping; }; void btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work); From 1357272fc7deeebb7b3c5d1a071562edc273cdaf Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Wed, 2 Oct 2013 20:41:01 +0300 Subject: [PATCH 378/459] Btrfs: fix a use-after-free bug in btrfs_dev_replace_finishing free_device rcu callback, scheduled from btrfs_rm_dev_replace_srcdev, can be processed before btrfs_scratch_superblock is called, which would result in a use-after-free on btrfs_device contents. Fix this by zeroing the superblock before the rcu callback is registered. Cc: Stefan Behrens Signed-off-by: Ilya Dryomov Signed-off-by: Josef Bacik --- fs/btrfs/dev-replace.c | 5 +---- fs/btrfs/volumes.c | 7 ++++++- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c index 5d844438b2d4..2a9bd5bd24c3 100644 --- a/fs/btrfs/dev-replace.c +++ b/fs/btrfs/dev-replace.c @@ -535,10 +535,7 @@ static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info, list_add(&tgt_device->dev_alloc_list, &fs_info->fs_devices->alloc_list); btrfs_rm_dev_replace_srcdev(fs_info, src_device); - if (src_device->bdev) { - /* zero out the old super */ - btrfs_scratch_superblock(src_device); - } + /* * this is again a consistent state where no dev_replace procedure * is running, the target device is part of the filesystem, the diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 043114749516..b0203b1322ac 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1716,6 +1716,7 @@ void btrfs_rm_dev_replace_srcdev(struct btrfs_fs_info *fs_info, struct btrfs_device *srcdev) { WARN_ON(!mutex_is_locked(&fs_info->fs_devices->device_list_mutex)); + list_del_rcu(&srcdev->dev_list); list_del_rcu(&srcdev->dev_alloc_list); fs_info->fs_devices->num_devices--; @@ -1725,9 +1726,13 @@ void btrfs_rm_dev_replace_srcdev(struct btrfs_fs_info *fs_info, } if (srcdev->can_discard) fs_info->fs_devices->num_can_discard--; - if (srcdev->bdev) + if (srcdev->bdev) { fs_info->fs_devices->open_devices--; + /* zero out the old super */ + btrfs_scratch_superblock(srcdev); + } + call_rcu(&srcdev->rcu, free_device); } From cb4fbe5703be51f8a2dff4052b1901941ab99e12 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 4 Oct 2013 12:57:22 -0700 Subject: [PATCH 379/459] selinux: avc_has_perm_flags has no more users .. so get rid of it. The only indirect users were all the avc_has_perm() callers which just expanded to have a zero flags argument. Signed-off-by: Linus Torvalds --- security/selinux/avc.c | 9 +++------ security/selinux/include/avc.h | 14 +++----------- 2 files changed, 6 insertions(+), 17 deletions(-) diff --git a/security/selinux/avc.c b/security/selinux/avc.c index dad36a6ab45f..e720f72fcb87 100644 --- a/security/selinux/avc.c +++ b/security/selinux/avc.c @@ -746,7 +746,6 @@ inline int avc_has_perm_noaudit(u32 ssid, u32 tsid, * @tclass: target security class * @requested: requested permissions, interpreted based on @tclass * @auditdata: auxiliary audit data - * @flags: VFS walk flags * * Check the AVC to determine whether the @requested permissions are granted * for the SID pair (@ssid, @tsid), interpreting the permissions @@ -756,17 +755,15 @@ inline int avc_has_perm_noaudit(u32 ssid, u32 tsid, * permissions are granted, -%EACCES if any permissions are denied, or * another -errno upon other errors. */ -int avc_has_perm_flags(u32 ssid, u32 tsid, u16 tclass, - u32 requested, struct common_audit_data *auditdata, - unsigned flags) +int avc_has_perm(u32 ssid, u32 tsid, u16 tclass, + u32 requested, struct common_audit_data *auditdata) { struct av_decision avd; int rc, rc2; rc = avc_has_perm_noaudit(ssid, tsid, tclass, requested, 0, &avd); - rc2 = avc_audit(ssid, tsid, tclass, requested, &avd, rc, auditdata, - flags); + rc2 = avc_audit(ssid, tsid, tclass, requested, &avd, rc, auditdata, 0); if (rc2) return rc2; return rc; diff --git a/security/selinux/include/avc.h b/security/selinux/include/avc.h index 92d0ab561db8..e30657b59cb3 100644 --- a/security/selinux/include/avc.h +++ b/security/selinux/include/avc.h @@ -147,17 +147,9 @@ int avc_has_perm_noaudit(u32 ssid, u32 tsid, unsigned flags, struct av_decision *avd); -int avc_has_perm_flags(u32 ssid, u32 tsid, - u16 tclass, u32 requested, - struct common_audit_data *auditdata, - unsigned); - -static inline int avc_has_perm(u32 ssid, u32 tsid, - u16 tclass, u32 requested, - struct common_audit_data *auditdata) -{ - return avc_has_perm_flags(ssid, tsid, tclass, requested, auditdata, 0); -} +int avc_has_perm(u32 ssid, u32 tsid, + u16 tclass, u32 requested, + struct common_audit_data *auditdata); u32 avc_policy_seqno(void); From ab3540626435c01e08fe58ce544311a78430f112 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 4 Oct 2013 14:05:38 -0700 Subject: [PATCH 380/459] selinux: remove 'flags' parameter from avc_audit() Now avc_audit() has no more users with that parameter. Remove it. Signed-off-by: Linus Torvalds --- security/selinux/avc.c | 2 +- security/selinux/hooks.c | 2 +- security/selinux/include/avc.h | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/security/selinux/avc.c b/security/selinux/avc.c index e720f72fcb87..fc3e6628a864 100644 --- a/security/selinux/avc.c +++ b/security/selinux/avc.c @@ -763,7 +763,7 @@ int avc_has_perm(u32 ssid, u32 tsid, u16 tclass, rc = avc_has_perm_noaudit(ssid, tsid, tclass, requested, 0, &avd); - rc2 = avc_audit(ssid, tsid, tclass, requested, &avd, rc, auditdata, 0); + rc2 = avc_audit(ssid, tsid, tclass, requested, &avd, rc, auditdata); if (rc2) return rc2; return rc; diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 967823212d7d..5b5231068516 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1502,7 +1502,7 @@ static int cred_has_capability(const struct cred *cred, rc = avc_has_perm_noaudit(sid, sid, sclass, av, 0, &avd); if (audit == SECURITY_CAP_AUDIT) { - int rc2 = avc_audit(sid, sid, sclass, av, &avd, rc, &ad, 0); + int rc2 = avc_audit(sid, sid, sclass, av, &avd, rc, &ad); if (rc2) return rc2; } diff --git a/security/selinux/include/avc.h b/security/selinux/include/avc.h index e30657b59cb3..f53ee3c58d0f 100644 --- a/security/selinux/include/avc.h +++ b/security/selinux/include/avc.h @@ -130,7 +130,7 @@ static inline int avc_audit(u32 ssid, u32 tsid, u16 tclass, u32 requested, struct av_decision *avd, int result, - struct common_audit_data *a, unsigned flags) + struct common_audit_data *a) { u32 audited, denied; audited = avc_audit_required(requested, avd, result, 0, &denied); @@ -138,7 +138,7 @@ static inline int avc_audit(u32 ssid, u32 tsid, return 0; return slow_avc_audit(ssid, tsid, tclass, requested, audited, denied, - a, flags); + a, 0); } #define AVC_STRICT 1 /* Ignore permissive mode. */ From 67d470e0e1711ca4a4c3a0e5524e0d580654053e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 4 Oct 2013 16:14:30 -0600 Subject: [PATCH 381/459] Revert "x86/PCI: MMCONFIG: Check earlier for MMCONFIG region at address zero" This reverts commit 07f9b61c3915e8eb156cb4461b3946736356ad02. 07f9b61c was intended to be a cleanup that didn't change anything, but in fact, for systems without _CBA (which is almost everything), it broke extended config space for domain 0 and all config space for other domains. Reference: http://lkml.kernel.org/r/20131004011806.GE20450@dangermouse.emea.sgi.com Reported-by: Hedi Berriche Signed-off-by: Bjorn Helgaas --- arch/x86/pci/mmconfig-shared.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 5596c7bdd327..082e88129712 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -700,7 +700,7 @@ int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end, if (!(pci_probe & PCI_PROBE_MMCONF) || pci_mmcfg_arch_init_failed) return -ENODEV; - if (start > end || !addr) + if (start > end) return -EINVAL; mutex_lock(&pci_mmcfg_lock); @@ -716,6 +716,11 @@ int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end, return -EEXIST; } + if (!addr) { + mutex_unlock(&pci_mmcfg_lock); + return -EINVAL; + } + rc = -EBUSY; cfg = pci_mmconfig_alloc(seg, start, end, addr); if (cfg == NULL) { From b208c2f7ceafacbc44f13d1b5a9fbada98226183 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 19 Sep 2013 20:37:07 -0700 Subject: [PATCH 382/459] btrfs: Fix crash due to not allocating integrity data for a bioset When btrfs creates a bioset, we must also allocate the integrity data pool. Otherwise btrfs will crash when it tries to submit a bio to a checksumming disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [] mempool_alloc+0x4a/0x150 PGD 2305e4067 PUD 23063d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: btrfs scsi_debug xfs ext4 jbd2 ext3 jbd mbcache sch_fq_codel eeprom lpc_ich mfd_core nfsd exportfs auth_rpcgss af_packet raid6_pq xor zlib_deflate libcrc32c [last unloaded: scsi_debug] CPU: 1 PID: 4486 Comm: mount Not tainted 3.12.0-rc1-mcsum #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8802451c9720 ti: ffff880230698000 task.ti: ffff880230698000 RIP: 0010:[] [] mempool_alloc+0x4a/0x150 RSP: 0018:ffff880230699688 EFLAGS: 00010286 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000005f8445 RDX: 0000000000000001 RSI: 0000000000000010 RDI: 0000000000000000 RBP: ffff8802306996f8 R08: 0000000000011200 R09: 0000000000000008 R10: 0000000000000020 R11: ffff88009d6e8000 R12: 0000000000011210 R13: 0000000000000030 R14: ffff8802306996b8 R15: ffff8802451c9720 FS: 00007f25b8a16800(0000) GS:ffff88024fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000018 CR3: 0000000230576000 CR4: 00000000000007e0 Stack: ffff8802451c9720 0000000000000002 ffffffff81a97100 0000000000281250 ffffffff81a96480 ffff88024fc99150 ffff880228d18200 0000000000000000 0000000000000000 0000000000000040 ffff880230e8c2e8 ffff8802459dc900 Call Trace: [] bio_integrity_alloc+0x48/0x1b0 [] bio_integrity_prep+0xac/0x360 [] ? mempool_alloc+0x58/0x150 [] ? alloc_extent_state+0x31/0x110 [btrfs] [] blk_queue_bio+0x1c9/0x460 [] generic_make_request+0xca/0x100 [] submit_bio+0x79/0x160 [] btrfs_map_bio+0x48e/0x5b0 [btrfs] [] btree_submit_bio_hook+0xda/0x110 [btrfs] [] submit_one_bio+0x6a/0xa0 [btrfs] [] read_extent_buffer_pages+0x250/0x310 [btrfs] [] ? __radix_tree_preload+0x66/0xf0 [] ? radix_tree_insert+0x95/0x260 [] btree_read_extent_buffer_pages.constprop.128+0xb6/0x120 [btrfs] [] read_tree_block+0x3a/0x60 [btrfs] [] open_ctree+0x139d/0x2030 [btrfs] [] btrfs_mount+0x53a/0x7d0 [btrfs] [] ? pcpu_alloc+0x8eb/0x9f0 [] ? __kmalloc_track_caller+0x35/0x1e0 [] mount_fs+0x20/0xd0 [] vfs_kern_mount+0x76/0x120 [] do_mount+0x200/0xa40 [] ? strndup_user+0x5b/0x80 [] SyS_mount+0x90/0xe0 [] system_call_fastpath+0x1a/0x1f Code: 4c 8d 75 a8 4c 89 6d e8 45 89 e0 4c 8d 6f 30 48 89 5d d8 41 83 e0 af 48 89 fb 49 83 c6 18 4c 89 7d f8 65 4c 8b 3c 25 c0 b8 00 00 <48> 8b 73 18 44 89 c7 44 89 45 98 ff 53 20 48 85 c0 48 89 c2 74 RIP [] mempool_alloc+0x4a/0x150 RSP CR2: 0000000000000018 ---[ end trace 7a96042017ed21e2 ]--- Signed-off-by: Darrick J. Wong Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 43feb4663f5b..22bda32acb89 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -145,8 +145,16 @@ int __init extent_io_init(void) offsetof(struct btrfs_io_bio, bio)); if (!btrfs_bioset) goto free_buffer_cache; + + if (bioset_integrity_create(btrfs_bioset, BIO_POOL_SIZE)) + goto free_bioset; + return 0; +free_bioset: + bioset_free(btrfs_bioset); + btrfs_bioset = NULL; + free_buffer_cache: kmem_cache_destroy(extent_buffer_cache); extent_buffer_cache = NULL; From 8412da757776727796e9edd64ba94814cc08d536 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 4 Oct 2013 15:16:04 +0300 Subject: [PATCH 383/459] x86/reboot: Add reboot quirk for Dell Latitude E5410 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Dell Latitude E5410 needs reboot=pci to actually reboot. Signed-off-by: Ville Syrjälä Link: http://lkml.kernel.org/r/1380888964-14517-1-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index e643e744e4d8..7e920bff99a3 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -326,6 +326,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6320"), }, }, + { /* Handle problems with rebooting on the Latitude E5410. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E5410", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E5410"), + }, + }, { /* Handle problems with rebooting on the Latitude E5420. */ .callback = set_pci_reboot, .ident = "Dell Latitude E5420", From 2433c8f094a008895e66f25bd1773cdb01c91d01 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 5 Oct 2013 13:15:30 -0700 Subject: [PATCH 384/459] net: Update the sysctl permissions handler to test effective uid/gid Modify the code to use current_euid(), and in_egroup_p, as in done in fs/proc/proc_sysctl.c:test_perm() Cc: stable@vger.kernel.org Reviewed-by: Eric Sandeen Reported-by: Eric Sandeen Signed-off-by: "Eric W. Biederman" Signed-off-by: Linus Torvalds --- net/sysctl_net.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sysctl_net.c b/net/sysctl_net.c index 9bc6db04be3e..e7000be321b0 100644 --- a/net/sysctl_net.c +++ b/net/sysctl_net.c @@ -47,12 +47,12 @@ static int net_ctl_permissions(struct ctl_table_header *head, /* Allow network administrator to have same access as root. */ if (ns_capable(net->user_ns, CAP_NET_ADMIN) || - uid_eq(root_uid, current_uid())) { + uid_eq(root_uid, current_euid())) { int mode = (table->mode >> 6) & 7; return (mode << 6) | (mode << 3) | mode; } /* Allow netns root group to have the same access as the root group */ - if (gid_eq(root_gid, current_gid())) { + if (in_egroup_p(root_gid)) { int mode = (table->mode >> 3) & 7; return (mode << 3) | mode; } From d0e639c9e06d44e713170031fe05fb60ebe680af Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 6 Oct 2013 14:00:20 -0700 Subject: [PATCH 385/459] Linux 3.12-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 2ae108d4f2af..9de9aba21bf9 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 12 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = One Giant Leap for Frogkind # *DOCUMENTATION* From 338cae565c53755de9f87d6a801517940d2d56f7 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 7 Oct 2013 10:39:59 +0200 Subject: [PATCH 386/459] ALSA: hda - Fix mono speakers and headset mic on Dell Vostro 5470 On this machine, DAC on node 0x03 seems to give mono output. Also, it needs additional patches for headset mic support. It supports CTIA style headsets only. Alsa-info available at the bug link below. Cc: stable@kernel.org (v3.10+) BugLink: https://bugs.launchpad.net/bugs/1236228 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 0e303b99a47c..52c26d3a61d4 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3496,6 +3496,15 @@ static void alc282_fixup_asus_tx300(struct hda_codec *codec, } } +static void alc290_fixup_mono_speakers(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + if (action == HDA_FIXUP_ACT_PRE_PROBE) + /* Remove DAC node 0x03, as it seems to be + giving mono output */ + snd_hda_override_wcaps(codec, 0x03, 0); +} + enum { ALC269_FIXUP_SONY_VAIO, ALC275_FIXUP_SONY_VAIO_GPIO2, @@ -3522,6 +3531,7 @@ enum { ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT, ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, ALC269_FIXUP_DELL2_MIC_NO_PRESENCE, + ALC269_FIXUP_DELL3_MIC_NO_PRESENCE, ALC269_FIXUP_HEADSET_MODE, ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC, ALC269_FIXUP_ASUS_X101_FUNC, @@ -3535,6 +3545,7 @@ enum { ALC283_FIXUP_CHROME_BOOK, ALC282_FIXUP_ASUS_TX300, ALC283_FIXUP_INT_MIC, + ALC290_FIXUP_MONO_SPEAKERS, }; static const struct hda_fixup alc269_fixups[] = { @@ -3712,6 +3723,15 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC }, + [ALC269_FIXUP_DELL3_MIC_NO_PRESENCE] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x1a, 0x01a1913c }, /* use as headset mic, without its own jack detect */ + { } + }, + .chained = true, + .chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC + }, [ALC269_FIXUP_HEADSET_MODE] = { .type = HDA_FIXUP_FUNC, .v.func = alc_fixup_headset_mode, @@ -3804,6 +3824,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC269_FIXUP_LIMIT_INT_MIC_BOOST }, + [ALC290_FIXUP_MONO_SPEAKERS] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc290_fixup_mono_speakers, + .chained = true, + .chain_id = ALC269_FIXUP_DELL3_MIC_NO_PRESENCE, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -3845,6 +3871,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0608, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0609, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0613, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x0616, "Dell Vostro 5470", ALC290_FIXUP_MONO_SPEAKERS), SND_PCI_QUIRK(0x1028, 0x15cc, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x15cd, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2), From de8cc234a517b61c9a8450a34408dbae53aa171f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 10 Sep 2013 17:06:26 +0530 Subject: [PATCH 387/459] spi: atmel: Fix incorrect error path 'irq' was not released when clk_prepare_enable failed. Fix it. Signed-off-by: Sachin Kamat Acked-by: Nicolas Ferre Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index fd7cc566095a..d4ac60b4a56e 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1583,7 +1583,7 @@ static int atmel_spi_probe(struct platform_device *pdev) /* Initialize the hardware */ ret = clk_prepare_enable(clk); if (ret) - goto out_unmap_regs; + goto out_free_irq; spi_writel(as, CR, SPI_BIT(SWRST)); spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ if (as->caps.has_wdrbt) { @@ -1614,6 +1614,7 @@ out_free_dma: spi_writel(as, CR, SPI_BIT(SWRST)); spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ clk_disable_unprepare(clk); +out_free_irq: free_irq(irq, master); out_unmap_regs: iounmap(as->regs); From 8b3c569a3999a8fd5a819f892525ab5520777c92 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Mon, 7 Oct 2013 12:14:26 +0100 Subject: [PATCH 388/459] MIPS: stack protector: Fix per-task canary switch Commit 1400eb6 (MIPS: r4k,octeon,r2300: stack protector: change canary per task) was merged in v3.11 and introduced assembly in the MIPS resume functions to update the value of the current canary in __stack_chk_guard. However it used PTR_L resulting in a load of the canary value, instead of PTR_LA to construct its address. The value is intended to be random but is then treated as an address in the subsequent LONG_S (store). This was observed to cause a fault and panic: CPU 0 Unable to handle kernel paging request at virtual address 139fea20, epc == 8000cc0c, ra == 8034f2a4 Oops[#1]: ... $24 : 139fea20 1e1f7cb6 ... Call Trace: [<8000cc0c>] resume+0xac/0x118 [<8034f2a4>] __schedule+0x5f8/0x78c [<8034f4e0>] schedule_preempt_disabled+0x20/0x2c [<80348eec>] rest_init+0x74/0x84 [<804dc990>] start_kernel+0x43c/0x454 Code: 3c18804b 8f184030 8cb901f8 00c0e021 8cb002f0 8cb102f4 8cb202f8 8cb302fc This can also be forced by modifying arch/mips/include/asm/stackprotector.h so that the default __stack_chk_guard value is more likely to be a bad (or unaligned) pointer. Fix it to use PTR_LA instead, to load the address of the canary value, which the LONG_S can then use to write into it. Reported-by: bobjones (via #mipslinux on IRC) Signed-off-by: James Hogan Cc: Ralf Baechle Cc: Gregory Fong Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/6026/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/octeon_switch.S | 2 +- arch/mips/kernel/r2300_switch.S | 2 +- arch/mips/kernel/r4k_switch.S | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S index 4204d76af854..029e002a4ea0 100644 --- a/arch/mips/kernel/octeon_switch.S +++ b/arch/mips/kernel/octeon_switch.S @@ -73,7 +73,7 @@ 3: #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP) - PTR_L t8, __stack_chk_guard + PTR_LA t8, __stack_chk_guard LONG_L t9, TASK_STACK_CANARY(a1) LONG_S t9, 0(t8) #endif diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S index 38af83f84c4a..20b7b040e76f 100644 --- a/arch/mips/kernel/r2300_switch.S +++ b/arch/mips/kernel/r2300_switch.S @@ -67,7 +67,7 @@ LEAF(resume) 1: #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP) - PTR_L t8, __stack_chk_guard + PTR_LA t8, __stack_chk_guard LONG_L t9, TASK_STACK_CANARY(a1) LONG_S t9, 0(t8) #endif diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S index 921238a6bd26..078de5eaca8f 100644 --- a/arch/mips/kernel/r4k_switch.S +++ b/arch/mips/kernel/r4k_switch.S @@ -69,7 +69,7 @@ 1: #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP) - PTR_L t8, __stack_chk_guard + PTR_LA t8, __stack_chk_guard LONG_L t9, TASK_STACK_CANARY(a1) LONG_S t9, 0(t8) #endif From f50f9aabf32db7414551ffdfdccc71be5f3d6e7d Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Wed, 2 Oct 2013 13:47:28 +0200 Subject: [PATCH 389/459] HID: wiimote: fix FF deadlock The input core has an internal spinlock that is acquired during event injection via input_event() and friends but also held during FF callbacks. That means, there is no way to share a lock between event-injection and FF handling. Unfortunately, this is what is required for wiimote state tracking and what we do with state.lock and input->lock. This deadlock can be triggered when using continuous data reporting and FF on a wiimote device at the same time. I takes me at least 30m of stress-testing to trigger it but users reported considerably shorter times (http://bpaste.net/show/132504/) when using some gaming-console emulators. The real problem is that we have two copies of internal state, one in the wiimote objects and the other in the input device. As the input-lock is not supposed to be accessed from outside of input-core, we have no other chance than offloading FF handling into a worker. This actually works pretty nice and also allows to implictly merge fast rumble changes into a single request. Due to the 3-layered workers (rumble+queue+l2cap) this might reduce FF responsiveness. Initial tests were fine so lets fix the race first and if it turns out to be too slow we can always handle FF out-of-band and skip the queue-worker. Cc: # 3.11+ Reported-by: Thomas Schneider Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/hid-wiimote-modules.c | 40 ++++++++++++++++++++++--------- drivers/hid/hid-wiimote.h | 4 +++- 2 files changed, 32 insertions(+), 12 deletions(-) diff --git a/drivers/hid/hid-wiimote-modules.c b/drivers/hid/hid-wiimote-modules.c index 2e7d644dba18..71adf9e60b13 100644 --- a/drivers/hid/hid-wiimote-modules.c +++ b/drivers/hid/hid-wiimote-modules.c @@ -119,12 +119,22 @@ static const struct wiimod_ops wiimod_keys = { * the rumble motor, this flag shouldn't be set. */ +/* used by wiimod_rumble and wiipro_rumble */ +static void wiimod_rumble_worker(struct work_struct *work) +{ + struct wiimote_data *wdata = container_of(work, struct wiimote_data, + rumble_worker); + + spin_lock_irq(&wdata->state.lock); + wiiproto_req_rumble(wdata, wdata->state.cache_rumble); + spin_unlock_irq(&wdata->state.lock); +} + static int wiimod_rumble_play(struct input_dev *dev, void *data, struct ff_effect *eff) { struct wiimote_data *wdata = input_get_drvdata(dev); __u8 value; - unsigned long flags; /* * The wiimote supports only a single rumble motor so if any magnitude @@ -137,9 +147,10 @@ static int wiimod_rumble_play(struct input_dev *dev, void *data, else value = 0; - spin_lock_irqsave(&wdata->state.lock, flags); - wiiproto_req_rumble(wdata, value); - spin_unlock_irqrestore(&wdata->state.lock, flags); + /* Locking state.lock here might deadlock with input_event() calls. + * schedule_work acts as barrier. Merging multiple changes is fine. */ + wdata->state.cache_rumble = value; + schedule_work(&wdata->rumble_worker); return 0; } @@ -147,6 +158,8 @@ static int wiimod_rumble_play(struct input_dev *dev, void *data, static int wiimod_rumble_probe(const struct wiimod_ops *ops, struct wiimote_data *wdata) { + INIT_WORK(&wdata->rumble_worker, wiimod_rumble_worker); + set_bit(FF_RUMBLE, wdata->input->ffbit); if (input_ff_create_memless(wdata->input, NULL, wiimod_rumble_play)) return -ENOMEM; @@ -159,6 +172,8 @@ static void wiimod_rumble_remove(const struct wiimod_ops *ops, { unsigned long flags; + cancel_work_sync(&wdata->rumble_worker); + spin_lock_irqsave(&wdata->state.lock, flags); wiiproto_req_rumble(wdata, 0); spin_unlock_irqrestore(&wdata->state.lock, flags); @@ -1731,7 +1746,6 @@ static int wiimod_pro_play(struct input_dev *dev, void *data, { struct wiimote_data *wdata = input_get_drvdata(dev); __u8 value; - unsigned long flags; /* * The wiimote supports only a single rumble motor so if any magnitude @@ -1744,9 +1758,10 @@ static int wiimod_pro_play(struct input_dev *dev, void *data, else value = 0; - spin_lock_irqsave(&wdata->state.lock, flags); - wiiproto_req_rumble(wdata, value); - spin_unlock_irqrestore(&wdata->state.lock, flags); + /* Locking state.lock here might deadlock with input_event() calls. + * schedule_work acts as barrier. Merging multiple changes is fine. */ + wdata->state.cache_rumble = value; + schedule_work(&wdata->rumble_worker); return 0; } @@ -1756,6 +1771,8 @@ static int wiimod_pro_probe(const struct wiimod_ops *ops, { int ret, i; + INIT_WORK(&wdata->rumble_worker, wiimod_rumble_worker); + wdata->extension.input = input_allocate_device(); if (!wdata->extension.input) return -ENOMEM; @@ -1817,12 +1834,13 @@ static void wiimod_pro_remove(const struct wiimod_ops *ops, if (!wdata->extension.input) return; + input_unregister_device(wdata->extension.input); + wdata->extension.input = NULL; + cancel_work_sync(&wdata->rumble_worker); + spin_lock_irqsave(&wdata->state.lock, flags); wiiproto_req_rumble(wdata, 0); spin_unlock_irqrestore(&wdata->state.lock, flags); - - input_unregister_device(wdata->extension.input); - wdata->extension.input = NULL; } static const struct wiimod_ops wiimod_pro = { diff --git a/drivers/hid/hid-wiimote.h b/drivers/hid/hid-wiimote.h index f1474f372c0b..75db0c400037 100644 --- a/drivers/hid/hid-wiimote.h +++ b/drivers/hid/hid-wiimote.h @@ -133,13 +133,15 @@ struct wiimote_state { __u8 *cmd_read_buf; __u8 cmd_read_size; - /* calibration data */ + /* calibration/cache data */ __u16 calib_bboard[4][3]; + __u8 cache_rumble; }; struct wiimote_data { struct hid_device *hdev; struct input_dev *input; + struct work_struct rumble_worker; struct led_classdev *leds[4]; struct input_dev *accel; struct input_dev *ir; From 8b5ede69d24db939f52b47effff2f6fe1e83e08b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 8 Oct 2013 08:08:24 +1100 Subject: [PATCH 390/459] powerpc/irq: Don't switch to irq stack from softirq stack MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit irq_exit() is now called on the irq stack, which can trigger a switch to the softirq stack from the irq stack. If an interrupt happens at that point, we will not properly detect the re-entrancy and clobber the original return context on the irq stack. This fixes it. The side effect is to prevent all nesting from softirq stack to irq stack even in the "safe" case but it's simpler that way and matches what x86_64 does. Reported-by: Cédric Le Goater Tested-by: Cédric Le Goater Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/irq.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 57d286a78f86..c7cb8c232d2f 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -495,14 +495,15 @@ void __do_irq(struct pt_regs *regs) void do_IRQ(struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); - struct thread_info *curtp, *irqtp; + struct thread_info *curtp, *irqtp, *sirqtp; /* Switch to the irq stack to handle this */ curtp = current_thread_info(); irqtp = hardirq_ctx[raw_smp_processor_id()]; + sirqtp = softirq_ctx[raw_smp_processor_id()]; /* Already there ? */ - if (unlikely(curtp == irqtp)) { + if (unlikely(curtp == irqtp || curtp == sirqtp)) { __do_irq(regs); set_irq_regs(old_regs); return; From b46b28d339164c8c74020eace97163e2e478ef34 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 8 Oct 2013 16:23:36 +1000 Subject: [PATCH 391/459] drm/nouveau/mc: disable msi support by default, it's busted in tons of places Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/mc/base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/mc/base.c b/drivers/gpu/drm/nouveau/core/subdev/mc/base.c index 37712a6df923..e290cfa4acee 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/mc/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/mc/base.c @@ -113,7 +113,7 @@ nouveau_mc_create_(struct nouveau_object *parent, struct nouveau_object *engine, pmc->use_msi = false; break; default: - pmc->use_msi = nouveau_boolopt(device->cfgopt, "NvMSI", true); + pmc->use_msi = nouveau_boolopt(device->cfgopt, "NvMSI", false); if (pmc->use_msi) { pmc->use_msi = pci_enable_msi(device->pdev) == 0; if (pmc->use_msi) { From 39edac70e9aedf451fccaa851b273ace9fcca0bd Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Mon, 7 Oct 2013 19:24:52 +0300 Subject: [PATCH 392/459] ALSA: hda - hdmi: Fix channel map switch not taking effect Currently hdmi_setup_audio_infoframe() reprograms the HDA channel mapping only when the infoframe is not up-to-date or the non-PCM flag has changed. However, when just the channel map has been changed, the infoframe may still be up-to-date and non-PCM flag may not have changed, so the new channel map is not actually programmed into the HDA codec. Notably, this failing case is also always triggered when the device is already in a prepared state and a new channel map is configured while changing only the channel positions (for example, plain "speaker-test -c2 -m FR,FL"). Fix that by always programming the channel map in hdmi_setup_audio_infoframe(). Tested on Intel HDMI. Signed-off-by: Anssi Hannula Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 7ea0245fc6bd..50173d412ac5 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -936,6 +936,14 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, return; } + /* + * always configure channel mapping, it may have been changed by the + * user in the meantime + */ + hdmi_setup_channel_mapping(codec, pin_nid, non_pcm, ca, + channels, per_pin->chmap, + per_pin->chmap_set); + /* * sizeof(ai) is used instead of sizeof(*hdmi_ai) or * sizeof(*dp_ai) to avoid partial match/update problems when @@ -947,20 +955,10 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, "pin=%d channels=%d\n", pin_nid, channels); - hdmi_setup_channel_mapping(codec, pin_nid, non_pcm, ca, - channels, per_pin->chmap, - per_pin->chmap_set); hdmi_stop_infoframe_trans(codec, pin_nid); hdmi_fill_audio_infoframe(codec, pin_nid, ai.bytes, sizeof(ai)); hdmi_start_infoframe_trans(codec, pin_nid); - } else { - /* For non-pcm audio switch, setup new channel mapping - * accordingly */ - if (per_pin->non_pcm != non_pcm) - hdmi_setup_channel_mapping(codec, pin_nid, non_pcm, ca, - channels, per_pin->chmap, - per_pin->chmap_set); } per_pin->non_pcm = non_pcm; From 016c12d2fb8584db392211bc6b0bdd6fcf7cfd97 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Mon, 7 Oct 2013 15:43:49 -0500 Subject: [PATCH 393/459] ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree SoC family definitions at the moment are reactive to board needs as a result, beagle-xm would matchup with ti,omap3 which invokes omap3430_init_early instead of omap3630_init_early. Obviously, this is the wrong behavior. With clock node dts conversion, we get the following warnings before system hangs as a result and 3630 based platforms fails to boot (uart4 clocks are only present in OMAP3630 and not present in OMAP3430): ... omap_hwmod: uart4: cannot clk_get main_clk uart4_fck omap_hwmod: uart4: cannot _init_clocks WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434 _init+0x6c/0x80() omap_hwmod: uart4: couldn't init clocks ... WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: timer12: enabled state can only be entered from initialized, idle, or disabled state ... WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224 _idle+0xd4/0xf8() omap_hwmod: timer12: idle state can only be entered from enabled state WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: uart4: enabled state can only be entered from initialized, idle, or disabled state So, add specific compatiblity for 3630 to allow match for Beagle-XM platform. Signed-off-by: Nishanth Menon [tony@atomide.com: left out ti,omap343x, updated comments] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +- arch/arm/mach-omap2/board-generic.c | 18 ++++++++++++++++++ 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 0c514dc8460c..2816bf612672 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -11,7 +11,7 @@ / { model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm", "ti,omap3-beagle", "ti,omap3"; + compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 39c78387ddec..87162e1b94a5 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -129,6 +129,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .restart = omap3xxx_restart, MACHINE_END +static const char *omap36xx_boards_compat[] __initdata = { + "ti,omap36xx", + NULL, +}; + +DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3630_init_early, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .init_late = omap3_init_late, + .init_time = omap3_sync32k_timer_init, + .dt_compat = omap36xx_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END + static const char *omap3_gp_boards_compat[] __initdata = { "ti,omap3-beagle", "timll,omap3-devkit8000", From d623a0e19dcbc4e44a8db047158815d7f8c2b839 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 7 Oct 2013 10:22:01 -0700 Subject: [PATCH 394/459] ARM: dts: Fix pinctrl mask for omap3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The wake-up interrupt bit is available on omap3/4/5 processors unlike what we claim. Without fixing it we cannot use it on omap3 and the system configured for wake-up events will just hang on wake-up. Cc: Grygorii Strashko Cc: Benoît Cousson Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3.dtsi | 4 ++-- arch/arm/mach-omap2/mux.h | 4 +--- include/dt-bindings/pinctrl/omap.h | 4 +--- 3 files changed, 4 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 7d95cda1fae4..b41bd57f4328 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -108,7 +108,7 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7f1f>; + pinctrl-single,function-mask = <0xff1f>; }; omap3_pmx_wkup: pinmux@0x48002a00 { @@ -117,7 +117,7 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7f1f>; + pinctrl-single,function-mask = <0xff1f>; }; gpio1: gpio@48310000 { diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 5d2080ef7923..16f78a990d04 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -28,7 +28,7 @@ #define OMAP_PULL_UP (1 << 4) #define OMAP_ALTELECTRICALSEL (1 << 5) -/* 34xx specific mux bit defines */ +/* omap3/4/5 specific mux bit defines */ #define OMAP_INPUT_EN (1 << 8) #define OMAP_OFF_EN (1 << 9) #define OMAP_OFFOUT_EN (1 << 10) @@ -36,8 +36,6 @@ #define OMAP_OFF_PULL_EN (1 << 12) #define OMAP_OFF_PULL_UP (1 << 13) #define OMAP_WAKEUP_EN (1 << 14) - -/* 44xx specific mux bit defines */ #define OMAP_WAKEUP_EVENT (1 << 15) /* Active pin states */ diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h index edbd250809cb..bed35e36fd27 100644 --- a/include/dt-bindings/pinctrl/omap.h +++ b/include/dt-bindings/pinctrl/omap.h @@ -23,7 +23,7 @@ #define PULL_UP (1 << 4) #define ALTELECTRICALSEL (1 << 5) -/* 34xx specific mux bit defines */ +/* omap3/4/5 specific mux bit defines */ #define INPUT_EN (1 << 8) #define OFF_EN (1 << 9) #define OFFOUT_EN (1 << 10) @@ -31,8 +31,6 @@ #define OFF_PULL_EN (1 << 12) #define OFF_PULL_UP (1 << 13) #define WAKEUP_EN (1 << 14) - -/* 44xx specific mux bit defines */ #define WAKEUP_EVENT (1 << 15) /* Active pin states */ From 0b8214fe186746d32d8ca5522b736d5b59fd5d40 Mon Sep 17 00:00:00 2001 From: Simon Barth Date: Tue, 8 Oct 2013 10:50:33 +0200 Subject: [PATCH 395/459] ARM: mach-omap2: board-generic: fix undefined symbol Since dra7 reuses the function 'omap5_realtime_timer_init' in arch/arm/mach-omap2/board-generic.c as timer init function, it has to be built for this SoC as well. Signed-off-by: Simon Barth Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index fa74a0625da1..ead48fa5715e 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -628,7 +628,7 @@ void __init omap4_local_timer_init(void) #endif /* CONFIG_HAVE_ARM_TWD */ #endif /* CONFIG_ARCH_OMAP4 */ -#ifdef CONFIG_SOC_OMAP5 +#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) void __init omap5_realtime_timer_init(void) { omap4_sync32k_timer_init(); @@ -636,7 +636,7 @@ void __init omap5_realtime_timer_init(void) clocksource_of_init(); } -#endif /* CONFIG_SOC_OMAP5 */ +#endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */ /** * omap_timer_init - build and register timer device with an From c6cc3d58b4042f5cadae653ff8d3df26af1a0169 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 8 Oct 2013 19:57:50 +0200 Subject: [PATCH 396/459] ALSA: hda - Add fixup for ASUS N56VZ ASUS N56VZ needs a fixup for the bass speaker pin, which was already provided via model=asus-mode4. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=841645 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 52c26d3a61d4..ed9deb66f593 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4596,6 +4596,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x05d8, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05db, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800), + SND_PCI_QUIRK(0x1043, 0x1477, "ASUS N56VZ", ALC662_FIXUP_ASUS_MODE4), SND_PCI_QUIRK(0x1043, 0x8469, "ASUS mobo", ALC662_FIXUP_NO_JACK_DETECT), SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_FIXUP_ASUS_MODE2), SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD), From d1f1ca36b566aa56effdd7df69750062ec735131 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Mon, 23 Sep 2013 14:50:12 +0200 Subject: [PATCH 397/459] ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit File drivers/leds/leds-lp55xx-common.c refuse to change led_current sysfs attribute if value is higher than max_current specified in board file. By default global C variables are zero, so changing always failed. This patch adding missing max_current and setting it to max safe value 100 (10 mA). It is unclear which commit exactly caused this regression as the lp5523 driver was broken and was hiding the platform data breakage. Now the driver is fixed so this should be fixed as well. Signed-off-by: Pali Rohár Signed-off-by: Joerg Reisenweber [tony@atomide.com: updated comments to describe regression] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51-peripherals.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index c3270c0f1fce..f6fe388af989 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -167,38 +167,47 @@ static struct lp55xx_led_config rx51_lp5523_led_config[] = { .name = "lp5523:kb1", .chan_nr = 0, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb2", .chan_nr = 1, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb3", .chan_nr = 2, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb4", .chan_nr = 3, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:b", .chan_nr = 4, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:g", .chan_nr = 5, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:r", .chan_nr = 6, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb5", .chan_nr = 7, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb6", .chan_nr = 8, .led_current = 50, + .max_current = 100, } }; From b9aa8510dd68143cc9d66c520002b638983e254b Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 8 Oct 2013 16:31:59 -0400 Subject: [PATCH 398/459] drm/gma500: fix things after get/put page helpers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 8b9ba7a3 'drm/gma500: use gem get/put page helpers' was missing a line, which resulted in garbled screen. Signed-off-by: Rob Clark Tested-by: Guillaume CLÉMENT Signed-off-by: Dave Airlie --- drivers/gpu/drm/gma500/gtt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/gma500/gtt.c b/drivers/gpu/drm/gma500/gtt.c index 92babac362ec..2db731f00930 100644 --- a/drivers/gpu/drm/gma500/gtt.c +++ b/drivers/gpu/drm/gma500/gtt.c @@ -204,6 +204,7 @@ static int psb_gtt_attach_pages(struct gtt_range *gt) if (IS_ERR(pages)) return PTR_ERR(pages); + gt->npage = gt->gem.size / PAGE_SIZE; gt->pages = pages; return 0; From 25f2bd7f5add608c1d1405938f39c96927b275ca Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Wed, 2 Oct 2013 19:15:03 +0200 Subject: [PATCH 399/459] hwmon: (applesmc) Always read until end of data The crash reported and investigated in commit 5f4513 turned out to be caused by a change to the read interface on newer (2012) SMCs. Tests by Chris show that simply reading the data valid line is enough for the problem to go away. Additional tests show that the newer SMCs no longer wait for the number of requested bytes, but start sending data right away. Apparently the number of bytes to read is no longer specified as before, but instead found out by reading until end of data. Failure to read until end of data confuses the state machine, which eventually causes the crash. As a remedy, assuming bit0 is the read valid line, make sure there is nothing more to read before leaving the read function. Tested to resolve the original problem, and runtested on MBA3,1, MBP4,1, MBP8,2, MBP10,1, MBP10,2. The patch seems to have no effect on machines before 2012. Tested-by: Chris Murphy Cc: stable@vger.kernel.org Signed-off-by: Henrik Rydberg Signed-off-by: Guenter Roeck --- drivers/hwmon/applesmc.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 98814d12a604..3288f13d2d87 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -230,6 +230,7 @@ static int send_argument(const char *key) static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) { + u8 status, data = 0; int i; if (send_command(cmd) || send_argument(key)) { @@ -237,6 +238,7 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) return -EIO; } + /* This has no effect on newer (2012) SMCs */ if (send_byte(len, APPLESMC_DATA_PORT)) { pr_warn("%.4s: read len fail\n", key); return -EIO; @@ -250,6 +252,17 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) buffer[i] = inb(APPLESMC_DATA_PORT); } + /* Read the data port until bit0 is cleared */ + for (i = 0; i < 16; i++) { + udelay(APPLESMC_MIN_WAIT); + status = inb(APPLESMC_CMD_PORT); + if (!(status & 0x01)) + break; + data = inb(APPLESMC_DATA_PORT); + } + if (i) + pr_warn("flushed %d bytes, last value is: %d\n", i, data); + return 0; } From ecc7e6f3bb8ad56764667aeabb860c24a6fa37f9 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 10 Oct 2013 07:05:41 +1000 Subject: [PATCH 400/459] Revert "drm/fb-helper: don't sleep for screen unblank when an oops is in progress" This reverts commit 928c2f0c006bf7f381f58af2b2786d2a858ae311. This patch double applied, two checks for the price of one. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index f6f6cc7fc133..3d13ca6e257f 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -407,14 +407,6 @@ static void drm_fb_helper_dpms(struct fb_info *info, int dpms_mode) struct drm_connector *connector; int i, j; - /* - * fbdev->blank can be called from irq context in case of a panic. - * Since we already have our own special panic handler which will - * restore the fbdev console mode completely, just bail out early. - */ - if (oops_in_progress) - return; - /* * fbdev->blank can be called from irq context in case of a panic. * Since we already have our own special panic handler which will From aaed41ec5b8d734f79d7b87723190256ac6a0926 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Sep 2013 18:44:39 -0400 Subject: [PATCH 401/459] drm/edid: catch kmalloc failure in drm_edid_to_speaker_allocation Return -ENOMEM if the allocation fails. Signed-off-by: Alex Deucher Reviewed-by: Jani Nikula --- drivers/gpu/drm/drm_edid.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 1688ff500513..830f7501cb4d 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -2925,6 +2925,8 @@ int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb) /* Speaker Allocation Data Block */ if (dbl == 3) { *sadb = kmalloc(dbl, GFP_KERNEL); + if (!*sadb) + return -ENOMEM; memcpy(*sadb, &db[1], dbl); count = dbl; break; From 062c2e4363451d49ef840232fe65e8bff0dde2a5 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Sep 2013 18:09:54 -0400 Subject: [PATCH 402/459] drm/radeon: use 64-bit math to calculate CTS values for audio (v2) Avoid losing precision. See bug: https://bugs.freedesktop.org/show_bug.cgi?id=69675 v2: fix math as per Anssi's comments. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_hdmi.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index b0fa6002af3e..49043a5ac65c 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -75,8 +75,15 @@ static const struct radeon_hdmi_acr r600_hdmi_predefined_acr[] = { */ static void r600_hdmi_calc_cts(uint32_t clock, int *CTS, int N, int freq) { - if (*CTS == 0) - *CTS = clock * N / (128 * freq) * 1000; + u64 n; + u32 d; + + if (*CTS == 0) { + n = (u64)clock * (u64)N * 1000ULL; + d = 128 * freq; + do_div(n, d); + *CTS = n; + } DRM_DEBUG("Using ACR timing N=%d CTS=%d for frequency %d\n", N, *CTS, freq); } From e7d12c2f98ae1e68c7298e5028048d150fa553a1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Sep 2013 18:19:42 -0400 Subject: [PATCH 403/459] drm/radeon: fix N/CTS clock matching for audio The drm code that calculates the 1001 clocks rounds up rather than truncating. This allows the table to match properly on those modes. See bug: https://bugs.freedesktop.org/show_bug.cgi?id=69675 Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_hdmi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index 49043a5ac65c..567703fdfbf1 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -57,15 +57,15 @@ enum r600_hdmi_iec_status_bits { static const struct radeon_hdmi_acr r600_hdmi_predefined_acr[] = { /* 32kHz 44.1kHz 48kHz */ /* Clock N CTS N CTS N CTS */ - { 25174, 4576, 28125, 7007, 31250, 6864, 28125 }, /* 25,20/1.001 MHz */ + { 25175, 4576, 28125, 7007, 31250, 6864, 28125 }, /* 25,20/1.001 MHz */ { 25200, 4096, 25200, 6272, 28000, 6144, 25200 }, /* 25.20 MHz */ { 27000, 4096, 27000, 6272, 30000, 6144, 27000 }, /* 27.00 MHz */ { 27027, 4096, 27027, 6272, 30030, 6144, 27027 }, /* 27.00*1.001 MHz */ { 54000, 4096, 54000, 6272, 60000, 6144, 54000 }, /* 54.00 MHz */ { 54054, 4096, 54054, 6272, 60060, 6144, 54054 }, /* 54.00*1.001 MHz */ - { 74175, 11648, 210937, 17836, 234375, 11648, 140625 }, /* 74.25/1.001 MHz */ + { 74176, 11648, 210937, 17836, 234375, 11648, 140625 }, /* 74.25/1.001 MHz */ { 74250, 4096, 74250, 6272, 82500, 6144, 74250 }, /* 74.25 MHz */ - { 148351, 11648, 421875, 8918, 234375, 5824, 140625 }, /* 148.50/1.001 MHz */ + { 148352, 11648, 421875, 8918, 234375, 5824, 140625 }, /* 148.50/1.001 MHz */ { 148500, 4096, 148500, 6272, 165000, 6144, 148500 }, /* 148.50 MHz */ { 0, 4096, 0, 6272, 0, 6144, 0 } /* Other */ }; From ee0fec312a1c4e26f255955da942562cd8908a4b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Sep 2013 18:22:15 -0400 Subject: [PATCH 404/459] drm/radeon: use hw generated CTS/N values for audio Use the hw generated values rather than calculating them in the driver. There may be some older r6xx asics where this doesn't work correctly. This remains to be seen. See bug: https://bugs.freedesktop.org/show_bug.cgi?id=69675 Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/evergreen_hdmi.c | 3 +-- drivers/gpu/drm/radeon/r600_hdmi.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index f71ce390aebe..f815c20640bd 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -288,8 +288,7 @@ void evergreen_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode /* fglrx clears sth in AFMT_AUDIO_PACKET_CONTROL2 here */ WREG32(HDMI_ACR_PACKET_CONTROL + offset, - HDMI_ACR_AUTO_SEND | /* allow hw to sent ACR packets when required */ - HDMI_ACR_SOURCE); /* select SW CTS value */ + HDMI_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */ evergreen_hdmi_update_ACR(encoder, mode->clock); diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index 567703fdfbf1..e2ae1c237fb4 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -451,8 +451,7 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod } WREG32(HDMI0_ACR_PACKET_CONTROL + offset, - HDMI0_ACR_AUTO_SEND | /* allow hw to sent ACR packets when required */ - HDMI0_ACR_SOURCE); /* select SW CTS value */ + HDMI0_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */ WREG32(HDMI0_VBI_PACKET_CONTROL + offset, HDMI0_NULL_SEND | /* send null packets when required */ From dca5086a90c9ec64f4e0de801a659508202b0640 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 30 Sep 2013 19:11:24 -0400 Subject: [PATCH 405/459] drm/radeon/dpm: disable multiple UVD states Always use the regular UVD state for now. This fixes a performance regression with UVD playback on certain APUs. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_pm.c | 3 +++ drivers/gpu/drm/radeon/radeon_uvd.c | 3 ++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index ac07ad1d4f8c..4f6b7fc7ad3c 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -945,6 +945,8 @@ void radeon_dpm_enable_uvd(struct radeon_device *rdev, bool enable) if (enable) { mutex_lock(&rdev->pm.mutex); rdev->pm.dpm.uvd_active = true; + /* disable this for now */ +#if 0 if ((rdev->pm.dpm.sd == 1) && (rdev->pm.dpm.hd == 0)) dpm_state = POWER_STATE_TYPE_INTERNAL_UVD_SD; else if ((rdev->pm.dpm.sd == 2) && (rdev->pm.dpm.hd == 0)) @@ -954,6 +956,7 @@ void radeon_dpm_enable_uvd(struct radeon_device *rdev, bool enable) else if ((rdev->pm.dpm.sd == 0) && (rdev->pm.dpm.hd == 2)) dpm_state = POWER_STATE_TYPE_INTERNAL_UVD_HD2; else +#endif dpm_state = POWER_STATE_TYPE_INTERNAL_UVD; rdev->pm.dpm.state = dpm_state; mutex_unlock(&rdev->pm.mutex); diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index a0f11856ddde..4f2e73f79638 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -798,7 +798,8 @@ void radeon_uvd_note_usage(struct radeon_device *rdev) (rdev->pm.dpm.hd != hd)) { rdev->pm.dpm.sd = sd; rdev->pm.dpm.hd = hd; - streams_changed = true; + /* disable this for now */ + /*streams_changed = true;*/ } } From aa3e146d04b6ae37939daeebaec060562b3db559 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 1 Oct 2013 16:40:45 -0400 Subject: [PATCH 406/459] drm/radeon: fix typo in CP DMA register headers Wrong bit offset for SRC endian swapping. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/evergreend.h | 4 ++-- drivers/gpu/drm/radeon/r600d.h | 2 +- drivers/gpu/drm/radeon/sid.h | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index 8768fd6a1e27..4f6d2962767d 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -1501,7 +1501,7 @@ * 6. COMMAND [29:22] | BYTE_COUNT [20:0] */ # define PACKET3_CP_DMA_DST_SEL(x) ((x) << 20) - /* 0 - SRC_ADDR + /* 0 - DST_ADDR * 1 - GDS */ # define PACKET3_CP_DMA_ENGINE(x) ((x) << 27) @@ -1516,7 +1516,7 @@ # define PACKET3_CP_DMA_CP_SYNC (1 << 31) /* COMMAND */ # define PACKET3_CP_DMA_DIS_WC (1 << 21) -# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 23) +# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 22) /* 0 - none * 1 - 8 in 16 * 2 - 8 in 32 diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index e673fe26ea84..7b3c7b5932c5 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -1523,7 +1523,7 @@ */ # define PACKET3_CP_DMA_CP_SYNC (1 << 31) /* COMMAND */ -# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 23) +# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 22) /* 0 - none * 1 - 8 in 16 * 2 - 8 in 32 diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h index 52d2ab6b67a0..7e2e0ea66a00 100644 --- a/drivers/gpu/drm/radeon/sid.h +++ b/drivers/gpu/drm/radeon/sid.h @@ -1553,7 +1553,7 @@ * 6. COMMAND [30:21] | BYTE_COUNT [20:0] */ # define PACKET3_CP_DMA_DST_SEL(x) ((x) << 20) - /* 0 - SRC_ADDR + /* 0 - DST_ADDR * 1 - GDS */ # define PACKET3_CP_DMA_ENGINE(x) ((x) << 27) @@ -1568,7 +1568,7 @@ # define PACKET3_CP_DMA_CP_SYNC (1 << 31) /* COMMAND */ # define PACKET3_CP_DMA_DIS_WC (1 << 21) -# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 23) +# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 22) /* 0 - none * 1 - 8 in 16 * 2 - 8 in 32 From 50b8f5aec04ebec7dbdf2adb17220b9148c99e63 Mon Sep 17 00:00:00 2001 From: wojciech kapuscinski Date: Tue, 1 Oct 2013 19:54:33 -0400 Subject: [PATCH 407/459] drm/radeon: fix hw contexts for SUMO2 asics They have 4 rather than 8. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63599 Signed-off-by: wojciech kapuscinski Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/evergreen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 555164e270a7..b5c67a99dda9 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3131,7 +3131,7 @@ static void evergreen_gpu_init(struct radeon_device *rdev) rdev->config.evergreen.sx_max_export_size = 256; rdev->config.evergreen.sx_max_export_pos_size = 64; rdev->config.evergreen.sx_max_export_smx_size = 192; - rdev->config.evergreen.max_hw_contexts = 8; + rdev->config.evergreen.max_hw_contexts = 4; rdev->config.evergreen.sq_num_cf_insts = 2; rdev->config.evergreen.sc_prim_fifo_size = 0x40; From 89cd67b326fa95872cc2b4524cd807128db6071d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 1 Jul 2013 19:39:34 +0300 Subject: [PATCH 408/459] drm/radeon: forever loop on error in radeon_do_test_moves() The error path does this: for (--i; i >= 0; --i) { which is a forever loop because "i" is unsigned. Signed-off-by: Dan Carpenter Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_test.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c index f4d6bcee9006..12e8099a0823 100644 --- a/drivers/gpu/drm/radeon/radeon_test.c +++ b/drivers/gpu/drm/radeon/radeon_test.c @@ -36,8 +36,8 @@ static void radeon_do_test_moves(struct radeon_device *rdev, int flag) struct radeon_bo *vram_obj = NULL; struct radeon_bo **gtt_obj = NULL; uint64_t gtt_addr, vram_addr; - unsigned i, n, size; - int r, ring; + unsigned n, size; + int i, r, ring; switch (flag) { case RADEON_TEST_COPY_DMA: From 96d8df846f52a720c8ae1fadadfad7c9e733e336 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 27 Sep 2013 23:18:39 +0300 Subject: [PATCH 409/459] drm/radeon/dpm/btc: off by one in btc_set_mc_special_registers() It should be ">=" instead of ">" here. The table->mc_reg_address[] array has SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE (16) elements. Signed-off-by: Dan Carpenter Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/btc_dpm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/btc_dpm.c b/drivers/gpu/drm/radeon/btc_dpm.c index b162e98a2953..9b6950d9b3c0 100644 --- a/drivers/gpu/drm/radeon/btc_dpm.c +++ b/drivers/gpu/drm/radeon/btc_dpm.c @@ -1930,7 +1930,7 @@ static int btc_set_mc_special_registers(struct radeon_device *rdev, } j++; - if (j > SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) return -EINVAL; tmp = RREG32(MC_PMG_CMD_MRS); @@ -1945,7 +1945,7 @@ static int btc_set_mc_special_registers(struct radeon_device *rdev, } j++; - if (j > SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) return -EINVAL; break; case MC_SEQ_RESERVE_M >> 2: @@ -1959,7 +1959,7 @@ static int btc_set_mc_special_registers(struct radeon_device *rdev, } j++; - if (j > SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) return -EINVAL; break; default: From 5fd9c581862a4874c0bdaf16231d8873832bbb99 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 28 Sep 2013 12:35:31 +0300 Subject: [PATCH 410/459] drm/radeon/dpm: off by one in si_set_mc_special_registers() These checks should be ">=" instead of ">". j is used as an offset into the table->mc_reg_address[] array and that has SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE (16) elements. Signed-off-by: Dan Carpenter Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/si_dpm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index 9ace28702c76..2332aa1bf93c 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -5208,7 +5208,7 @@ static int si_set_mc_special_registers(struct radeon_device *rdev, table->mc_reg_table_entry[k].mc_data[j] |= 0x100; } j++; - if (j > SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) return -EINVAL; if (!pi->mem_gddr5) { @@ -5218,7 +5218,7 @@ static int si_set_mc_special_registers(struct radeon_device *rdev, table->mc_reg_table_entry[k].mc_data[j] = (table->mc_reg_table_entry[k].mc_data[i] & 0xffff0000) >> 16; j++; - if (j > SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) return -EINVAL; } break; @@ -5231,7 +5231,7 @@ static int si_set_mc_special_registers(struct radeon_device *rdev, (temp_reg & 0xffff0000) | (table->mc_reg_table_entry[k].mc_data[i] & 0x0000ffff); j++; - if (j > SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) return -EINVAL; break; default: From a6f4ae8dc904ad0e4e416800172fc88f716314dd Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 2 Oct 2013 14:50:57 -0400 Subject: [PATCH 411/459] drm/radeon: improve soft reset on SI Disable CG/PG and stop the rlc before resetting. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/si.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index c354c1094967..d4652af425b8 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -85,6 +85,9 @@ extern void si_dma_vm_set_page(struct radeon_device *rdev, uint32_t incr, uint32_t flags); static void si_enable_gui_idle_interrupt(struct radeon_device *rdev, bool enable); +static void si_fini_pg(struct radeon_device *rdev); +static void si_fini_cg(struct radeon_device *rdev); +static void si_rlc_stop(struct radeon_device *rdev); static const u32 verde_rlc_save_restore_register_list[] = { @@ -3608,6 +3611,13 @@ static void si_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) dev_info(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n", RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS)); + /* disable PG/CG */ + si_fini_pg(rdev); + si_fini_cg(rdev); + + /* stop the rlc */ + si_rlc_stop(rdev); + /* Disable CP parsing/prefetching */ WREG32(CP_ME_CNTL, CP_ME_HALT | CP_PFP_HALT | CP_CE_HALT); From fb2c7f4d2e7a40fa4d5cc589f21dad89b371edb0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 2 Oct 2013 14:54:44 -0400 Subject: [PATCH 412/459] drm/radeon: improve soft reset on CIK Disable CG/PG before resetting. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/cik.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index d02fd1c045d5..b874ccdf52f7 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -77,6 +77,8 @@ static void cik_pcie_gen3_enable(struct radeon_device *rdev); static void cik_program_aspm(struct radeon_device *rdev); static void cik_init_pg(struct radeon_device *rdev); static void cik_init_cg(struct radeon_device *rdev); +static void cik_fini_pg(struct radeon_device *rdev); +static void cik_fini_cg(struct radeon_device *rdev); static void cik_enable_gui_idle_interrupt(struct radeon_device *rdev, bool enable); @@ -4185,6 +4187,10 @@ static void cik_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) dev_info(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n", RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS)); + /* disable CG/PG */ + cik_fini_pg(rdev); + cik_fini_cg(rdev); + /* stop the rlc */ cik_rlc_stop(rdev); From 4076a65544e2de310cbf4eaadb13ee15bbfaaf4f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 7 Oct 2013 21:25:39 -0400 Subject: [PATCH 413/459] drm/radeon/dpm: disable bapm on TN asics Causes hangs on certain boards. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=70053 Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/trinity_dpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/trinity_dpm.c b/drivers/gpu/drm/radeon/trinity_dpm.c index 7f998bf1cc9d..9364129ba292 100644 --- a/drivers/gpu/drm/radeon/trinity_dpm.c +++ b/drivers/gpu/drm/radeon/trinity_dpm.c @@ -1868,7 +1868,7 @@ int trinity_dpm_init(struct radeon_device *rdev) for (i = 0; i < SUMO_MAX_HARDWARE_POWERLEVELS; i++) pi->at[i] = TRINITY_AT_DFLT; - pi->enable_bapm = true; + pi->enable_bapm = false; pi->enable_nbps_policy = true; pi->enable_sclk_ds = true; pi->enable_gfx_power_gating = true; From cccdcea14fc2de8707c52e537fa2b384ccfe7ec2 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:33 +0200 Subject: [PATCH 414/459] i2c: i2c-designware-platdrv: replace platform_driver_probe to support deferred probing Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Reported-by: Zhangfei Gao Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-platdrv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 4c1b60539a25..0aa01136f8d9 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -270,7 +270,8 @@ static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume); MODULE_ALIAS("platform:i2c_designware"); static struct platform_driver dw_i2c_driver = { - .remove = dw_i2c_remove, + .probe = dw_i2c_probe, + .remove = dw_i2c_remove, .driver = { .name = "i2c_designware", .owner = THIS_MODULE, @@ -282,7 +283,7 @@ static struct platform_driver dw_i2c_driver = { static int __init dw_i2c_init_driver(void) { - return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe); + return platform_driver_register(&dw_i2c_driver); } subsys_initcall(dw_i2c_init_driver); From 3611431ce7281a6542d47bd5b2fc2206fed5749f Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:34 +0200 Subject: [PATCH 415/459] i2c: i2c-imx: replace platform_driver_probe to support deferred probing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Uwe Kleine-König Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index ccf46656bdad..1d7efa3169cd 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -365,7 +365,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) clk_disable_unprepare(i2c_imx->clk); } -static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, +static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, unsigned int rate) { struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div; @@ -589,7 +589,7 @@ static struct i2c_algorithm i2c_imx_algo = { .functionality = i2c_imx_func, }; -static int __init i2c_imx_probe(struct platform_device *pdev) +static int i2c_imx_probe(struct platform_device *pdev) { const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids, &pdev->dev); @@ -697,7 +697,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev) return 0; /* Return OK */ } -static int __exit i2c_imx_remove(struct platform_device *pdev) +static int i2c_imx_remove(struct platform_device *pdev) { struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev); @@ -715,7 +715,8 @@ static int __exit i2c_imx_remove(struct platform_device *pdev) } static struct platform_driver i2c_imx_driver = { - .remove = __exit_p(i2c_imx_remove), + .probe = i2c_imx_probe, + .remove = i2c_imx_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, @@ -726,7 +727,7 @@ static struct platform_driver i2c_imx_driver = { static int __init i2c_adap_imx_init(void) { - return platform_driver_probe(&i2c_imx_driver, i2c_imx_probe); + return platform_driver_register(&i2c_imx_driver); } subsys_initcall(i2c_adap_imx_init); From cc40bf9a444f687a7b76450b1ad742b2ea262af4 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:35 +0200 Subject: [PATCH 416/459] i2c: i2c-mxs: replace platform_driver_probe to support deferred probing Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Marek Vasut Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index f4a01675fa71..b7c857774708 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -780,12 +780,13 @@ static struct platform_driver mxs_i2c_driver = { .owner = THIS_MODULE, .of_match_table = mxs_i2c_dt_ids, }, + .probe = mxs_i2c_probe, .remove = mxs_i2c_remove, }; static int __init mxs_i2c_init(void) { - return platform_driver_probe(&mxs_i2c_driver, mxs_i2c_probe); + return platform_driver_register(&mxs_i2c_driver); } subsys_initcall(mxs_i2c_init); From 6d2cfb109725b748f47a242f87be9c31bf7e42c0 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:36 +0200 Subject: [PATCH 417/459] i2c: i2c-stu300: replace platform_driver_probe to support deferred probing Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Linus Walleij Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-stu300.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index f8f6f2e552db..04a17b9b38bb 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -859,8 +859,7 @@ static const struct i2c_algorithm stu300_algo = { .functionality = stu300_func, }; -static int __init -stu300_probe(struct platform_device *pdev) +static int stu300_probe(struct platform_device *pdev) { struct stu300_dev *dev; struct i2c_adapter *adap; @@ -966,8 +965,7 @@ static SIMPLE_DEV_PM_OPS(stu300_pm, stu300_suspend, stu300_resume); #define STU300_I2C_PM NULL #endif -static int __exit -stu300_remove(struct platform_device *pdev) +static int stu300_remove(struct platform_device *pdev) { struct stu300_dev *dev = platform_get_drvdata(pdev); @@ -989,13 +987,14 @@ static struct platform_driver stu300_i2c_driver = { .pm = STU300_I2C_PM, .of_match_table = stu300_dt_match, }, - .remove = __exit_p(stu300_remove), + .probe = stu300_probe, + .remove = stu300_remove, }; static int __init stu300_init(void) { - return platform_driver_probe(&stu300_i2c_driver, stu300_probe); + return platform_driver_register(&stu300_i2c_driver); } static void __exit stu300_exit(void) From 47b6e477ed4ecacddd1f82d04d686026e08dc3db Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 10 Oct 2013 08:04:06 +0200 Subject: [PATCH 418/459] i2c: Not all adapters have a parent The code in acpi_i2c_register_devices() assumes that all i2c adapters have a parent. This is not necessarily the case, for example the i2c-stub driver instantiate a virtual i2c adapter without a parent. Check for this to avoid a NULL pointer deference. Signed-off-by: Jean Delvare Acked-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 29d3f045a2bf..3be58f89ac77 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1134,6 +1134,9 @@ static void acpi_i2c_register_devices(struct i2c_adapter *adap) acpi_handle handle; acpi_status status; + if (!adap->dev.parent) + return; + handle = ACPI_HANDLE(adap->dev.parent); if (!handle) return; From 4cdbf7d346e7461c3b93a26707c852e2c9db3753 Mon Sep 17 00:00:00 2001 From: Taras Kondratiuk Date: Mon, 7 Oct 2013 13:41:59 +0300 Subject: [PATCH 419/459] i2c: omap: Clear ARDY bit twice Initially commit cb527ede1bf6ff2008a025606f25344b8ed7b4ac "i2c-omap: Double clear of ARDY status in IRQ handler" added a workaround for undocumented errata ProDB0017052. But then commit 1d7afc95946487945cc7f5019b41255b72224b70 "i2c: omap: ack IRQ in parts" refactored code and missed one of ARDY clearings. So current code violates errata. It causes often i2c bus timeouts on my Pandaboard. This patch adds a second clearing in place. Signed-off-by: Grygorii Strashko Signed-off-by: Taras Kondratiuk Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-omap.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 6d8308d5dc4e..9967a6f9c2ff 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -939,6 +939,9 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) /* * ProDB0017052: Clear ARDY bit twice */ + if (stat & OMAP_I2C_STAT_ARDY) + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_ARDY); + if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_RRDY | From 492ed77bfadb968cca7beca348cd45b444393cd4 Mon Sep 17 00:00:00 2001 From: Ionut Nicu Date: Tue, 8 Oct 2013 15:51:53 +0200 Subject: [PATCH 420/459] i2c: i2c-mux-gpio: don't ignore of_get_named_gpio errors of_get_named_gpio could return -E_PROBE_DEFER or another error code. This error should be passed further instead of being ignored. Signed-off-by: Ionut Nicu Acked-by: Peter Korsgaard Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-gpio.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c index 5d4a99ba743e..7f343bcd492e 100644 --- a/drivers/i2c/muxes/i2c-mux-gpio.c +++ b/drivers/i2c/muxes/i2c-mux-gpio.c @@ -66,7 +66,7 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux, struct device_node *adapter_np, *child; struct i2c_adapter *adapter; unsigned *values, *gpios; - int i = 0; + int i = 0, ret; if (!np) return -ENODEV; @@ -116,8 +116,12 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux, return -ENOMEM; } - for (i = 0; i < mux->data.n_gpios; i++) - gpios[i] = of_get_named_gpio(np, "mux-gpios", i); + for (i = 0; i < mux->data.n_gpios; i++) { + ret = of_get_named_gpio(np, "mux-gpios", i); + if (ret < 0) + return ret; + gpios[i] = ret; + } mux->data.gpios = gpios; From 9937b8d89e1b70c08330b57afbc62c934e37c9e2 Mon Sep 17 00:00:00 2001 From: Ionut Nicu Date: Wed, 9 Oct 2013 11:50:45 +0200 Subject: [PATCH 421/459] i2c: i2c-mux-gpio: use deferred probing If the i2c-parent bus driver is not loaded, returning -ENODEV will force people to unload and then reload the module again to get it working. Signed-off-by: Ionut Nicu Acked-by: Peter Korsgaard Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c index 7f343bcd492e..a764da777f08 100644 --- a/drivers/i2c/muxes/i2c-mux-gpio.c +++ b/drivers/i2c/muxes/i2c-mux-gpio.c @@ -79,7 +79,7 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux, adapter = of_find_i2c_adapter_by_node(adapter_np); if (!adapter) { dev_err(&pdev->dev, "Cannot find parent bus\n"); - return -ENODEV; + return -EPROBE_DEFER; } mux->data.parent = i2c_adapter_id(adapter); put_device(&adapter->dev); @@ -181,7 +181,7 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev) if (!parent) { dev_err(&pdev->dev, "Parent adapter (%d) not found\n", mux->data.parent); - return -ENODEV; + return -EPROBE_DEFER; } mux->parent = parent; From 0cd98069ad7acb2a1bdb1bb71b904c1aae0033d0 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 10 Oct 2013 10:19:13 +0200 Subject: [PATCH 422/459] i2c: i2c-arb-gpio-challenge: use deferred probe when adapter not found If it is not there yet, it might appear later. Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-arb-gpio-challenge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c index 74b41ae690f3..928656e241dd 100644 --- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c +++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c @@ -200,7 +200,7 @@ static int i2c_arbitrator_probe(struct platform_device *pdev) arb->parent = of_find_i2c_adapter_by_node(parent_np); if (!arb->parent) { dev_err(dev, "Cannot find parent bus\n"); - return -EINVAL; + return -EPROBE_DEFER; } /* Actually add the mux adapter */ From 2737de460e33df89461a59b247d3bfd477101785 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 10 Oct 2013 10:19:13 +0200 Subject: [PATCH 423/459] i2c: i2c-mux-pinctrl: use deferred probe when adapter not found If it is not there yet, it might appear later. Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-pinctrl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c index 69a91732ae65..68a37157377d 100644 --- a/drivers/i2c/muxes/i2c-mux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c @@ -113,7 +113,7 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux, adapter = of_find_i2c_adapter_by_node(adapter_np); if (!adapter) { dev_err(mux->dev, "Cannot find parent bus\n"); - return -ENODEV; + return -EPROBE_DEFER; } mux->pdata->parent_bus_num = i2c_adapter_id(adapter); put_device(&adapter->dev); @@ -211,7 +211,7 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev) if (!mux->parent) { dev_err(&pdev->dev, "Parent adapter (%d) not found\n", mux->pdata->parent_bus_num); - ret = -ENODEV; + ret = -EPROBE_DEFER; goto err; } From d0d538b9d1239ed6ed318a2304ba5a763f835089 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Wed, 9 Oct 2013 19:13:19 +0300 Subject: [PATCH 424/459] KVM: nVMX: fix shadow on EPT 72f857950f6f19 broke shadow on EPT. This patch reverts it and fixes PAE on nEPT (which reverted commit fixed) in other way. Shadow on EPT is now broken because while L1 builds shadow page table for L2 (which is PAE while L2 is in real mode) it never loads L2's GUEST_PDPTR[0-3]. They do not need to be loaded because without nested virtualization HW does this during guest entry if EPT is disabled, but in our case L0 emulates L2's vmentry while EPT is enables, so we cannot rely on vmcs12->guest_pdptr[0-3] to contain up-to-date values and need to re-read PDPTEs from L2 memory. This is what kvm_set_cr3() is doing, but by clearing cache bits during L2 vmentry we drop values that kvm_set_cr3() read from memory. So why the same code does not work for PAE on nEPT? kvm_set_cr3() reads pdptes into vcpu->arch.walk_mmu->pdptrs[]. walk_mmu points to vcpu->arch.nested_mmu while nested guest is running, but ept_load_pdptrs() uses vcpu->arch.mmu which contain incorrect values. Fix that by using walk_mmu in ept_(load|save)_pdptrs. Signed-off-by: Gleb Natapov Reviewed-by: Paolo Bonzini Tested-by: Paolo Bonzini Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 3b8e7459dd4d..2b2fce1b2009 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -3255,25 +3255,29 @@ static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu) static void ept_load_pdptrs(struct kvm_vcpu *vcpu) { + struct kvm_mmu *mmu = vcpu->arch.walk_mmu; + if (!test_bit(VCPU_EXREG_PDPTR, (unsigned long *)&vcpu->arch.regs_dirty)) return; if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) { - vmcs_write64(GUEST_PDPTR0, vcpu->arch.mmu.pdptrs[0]); - vmcs_write64(GUEST_PDPTR1, vcpu->arch.mmu.pdptrs[1]); - vmcs_write64(GUEST_PDPTR2, vcpu->arch.mmu.pdptrs[2]); - vmcs_write64(GUEST_PDPTR3, vcpu->arch.mmu.pdptrs[3]); + vmcs_write64(GUEST_PDPTR0, mmu->pdptrs[0]); + vmcs_write64(GUEST_PDPTR1, mmu->pdptrs[1]); + vmcs_write64(GUEST_PDPTR2, mmu->pdptrs[2]); + vmcs_write64(GUEST_PDPTR3, mmu->pdptrs[3]); } } static void ept_save_pdptrs(struct kvm_vcpu *vcpu) { + struct kvm_mmu *mmu = vcpu->arch.walk_mmu; + if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) { - vcpu->arch.mmu.pdptrs[0] = vmcs_read64(GUEST_PDPTR0); - vcpu->arch.mmu.pdptrs[1] = vmcs_read64(GUEST_PDPTR1); - vcpu->arch.mmu.pdptrs[2] = vmcs_read64(GUEST_PDPTR2); - vcpu->arch.mmu.pdptrs[3] = vmcs_read64(GUEST_PDPTR3); + mmu->pdptrs[0] = vmcs_read64(GUEST_PDPTR0); + mmu->pdptrs[1] = vmcs_read64(GUEST_PDPTR1); + mmu->pdptrs[2] = vmcs_read64(GUEST_PDPTR2); + mmu->pdptrs[3] = vmcs_read64(GUEST_PDPTR3); } __set_bit(VCPU_EXREG_PDPTR, @@ -7777,10 +7781,6 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12) vmcs_write64(GUEST_PDPTR1, vmcs12->guest_pdptr1); vmcs_write64(GUEST_PDPTR2, vmcs12->guest_pdptr2); vmcs_write64(GUEST_PDPTR3, vmcs12->guest_pdptr3); - __clear_bit(VCPU_EXREG_PDPTR, - (unsigned long *)&vcpu->arch.regs_avail); - __clear_bit(VCPU_EXREG_PDPTR, - (unsigned long *)&vcpu->arch.regs_dirty); } kvm_register_write(vcpu, VCPU_REGS_RSP, vmcs12->guest_rsp); From cfc860253abd73e1681696c08ea268d33285a2c4 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Sat, 21 Sep 2013 09:53:28 +1000 Subject: [PATCH 425/459] KVM: PPC: Book3S HV: Fix typo in saving DSCR This fixes a typo in the code that saves the guest DSCR (Data Stream Control Register) into the kvm_vcpu_arch struct on guest exit. The effect of the typo was that the DSCR value was saved in the wrong place, so changes to the DSCR by the guest didn't persist across guest exit and entry, and some host kernel memory got corrupted. Cc: stable@vger.kernel.org [v3.1+] Signed-off-by: Paul Mackerras Acked-by: Alexander Graf Signed-off-by: Paolo Bonzini --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 294b7af28cdd..c71103b8a748 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1066,7 +1066,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206) BEGIN_FTR_SECTION mfspr r8, SPRN_DSCR ld r7, HSTATE_DSCR(r13) - std r8, VCPU_DSCR(r7) + std r8, VCPU_DSCR(r9) mtspr SPRN_DSCR, r7 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206) From 40fde70d0df993d1a652d6cc69f8b4e967656170 Mon Sep 17 00:00:00 2001 From: Bharat Bhushan Date: Wed, 7 Aug 2013 15:33:46 +0530 Subject: [PATCH 426/459] kvm: ppc: booke: check range page invalidation progress on page setup When the MM code is invalidating a range of pages, it calls the KVM kvm_mmu_notifier_invalidate_range_start() notifier function, which calls kvm_unmap_hva_range(), which arranges to flush all the TLBs for guest pages. However, the Linux PTEs for the range being flushed are still valid at that point. We are not supposed to establish any new references to pages in the range until the ...range_end() notifier gets called. The PPC-specific KVM code doesn't get any explicit notification of that; instead, we are supposed to use mmu_notifier_retry() to test whether we are or have been inside a range flush notifier pair while we have been referencing a page. This patch calls the mmu_notifier_retry() while mapping the guest page to ensure we are not referencing a page when in range invalidation. This call is inside a region locked with kvm->mmu_lock, which is the same lock that is called by the KVM MMU notifier functions, thus ensuring that no new notification can proceed while we are in the locked region. Signed-off-by: Bharat Bhushan Acked-by: Alexander Graf [Backported to 3.12 - Paolo] Reviewed-by: Bharat Bhushan Signed-off-by: Paolo Bonzini --- arch/powerpc/kvm/e500_mmu_host.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kvm/e500_mmu_host.c b/arch/powerpc/kvm/e500_mmu_host.c index 1c6a9d729df4..c65593abae8e 100644 --- a/arch/powerpc/kvm/e500_mmu_host.c +++ b/arch/powerpc/kvm/e500_mmu_host.c @@ -332,6 +332,13 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, unsigned long hva; int pfnmap = 0; int tsize = BOOK3E_PAGESZ_4K; + int ret = 0; + unsigned long mmu_seq; + struct kvm *kvm = vcpu_e500->vcpu.kvm; + + /* used to check for invalidations in progress */ + mmu_seq = kvm->mmu_notifier_seq; + smp_rmb(); /* * Translate guest physical to true physical, acquiring @@ -449,6 +456,12 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, gvaddr &= ~((tsize_pages << PAGE_SHIFT) - 1); } + spin_lock(&kvm->mmu_lock); + if (mmu_notifier_retry(kvm, mmu_seq)) { + ret = -EAGAIN; + goto out; + } + kvmppc_e500_ref_setup(ref, gtlbe, pfn); kvmppc_e500_setup_stlbe(&vcpu_e500->vcpu, gtlbe, tsize, @@ -457,10 +470,13 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, /* Clear i-cache for new pages */ kvmppc_mmu_flush_icache(pfn); +out: + spin_unlock(&kvm->mmu_lock); + /* Drop refcount on page, so that mmu notifiers can clear it */ kvm_release_pfn_clean(pfn); - return 0; + return ret; } /* XXX only map the one-one case, for now use TLB0 */ From b852c985010a77c850b7548d64bbb964ca462b02 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 10 Oct 2013 11:47:01 -0400 Subject: [PATCH 427/459] drm/radeon: re-enable sw ACR support on pre-DCE4 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit HW ACR support may have issues on some older chips, so use SW ACR for now until we've tested further. Signed-off-by: Alex Deucher CC: Rafał Miłecki --- drivers/gpu/drm/radeon/r600_hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index e2ae1c237fb4..5b729319f27b 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -451,6 +451,7 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod } WREG32(HDMI0_ACR_PACKET_CONTROL + offset, + HDMI0_ACR_SOURCE | /* select SW CTS value - XXX verify that hw CTS works on all families */ HDMI0_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */ WREG32(HDMI0_VBI_PACKET_CONTROL + offset, From 61875f30daf60305712e25b209ef41ced2635bad Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 21 Sep 2013 13:58:22 -0400 Subject: [PATCH 428/459] random: allow architectures to optionally define random_get_entropy() Allow architectures which have a disabled get_cycles() function to provide a random_get_entropy() function which provides a fine-grained, rapidly changing counter that can be used by the /dev/random driver. For example, an architecture might have a rapidly changing register used to control random TLB cache eviction, or DRAM refresh that doesn't meet the requirements of get_cycles(), but which is good enough for the needs of the random driver. Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- drivers/char/random.c | 8 ++++---- include/linux/timex.h | 14 ++++++++++++++ 2 files changed, 18 insertions(+), 4 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 92e6c67e1ae6..2d5daf9b58e9 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -643,7 +643,7 @@ struct timer_rand_state { */ void add_device_randomness(const void *buf, unsigned int size) { - unsigned long time = get_cycles() ^ jiffies; + unsigned long time = random_get_entropy() ^ jiffies; mix_pool_bytes(&input_pool, buf, size, NULL); mix_pool_bytes(&input_pool, &time, sizeof(time), NULL); @@ -680,7 +680,7 @@ static void add_timer_randomness(struct timer_rand_state *state, unsigned num) goto out; sample.jiffies = jiffies; - sample.cycles = get_cycles(); + sample.cycles = random_get_entropy(); sample.num = num; mix_pool_bytes(&input_pool, &sample, sizeof(sample), NULL); @@ -747,7 +747,7 @@ void add_interrupt_randomness(int irq, int irq_flags) struct fast_pool *fast_pool = &__get_cpu_var(irq_randomness); struct pt_regs *regs = get_irq_regs(); unsigned long now = jiffies; - __u32 input[4], cycles = get_cycles(); + __u32 input[4], cycles = random_get_entropy(); input[0] = cycles ^ jiffies; input[1] = irq; @@ -1485,7 +1485,7 @@ unsigned int get_random_int(void) hash = get_cpu_var(get_random_int_hash); - hash[0] += current->pid + jiffies + get_cycles(); + hash[0] += current->pid + jiffies + random_get_entropy(); md5_transform(hash, random_int_secret); ret = hash[0]; put_cpu_var(get_random_int_hash); diff --git a/include/linux/timex.h b/include/linux/timex.h index b3726e61368e..da4c32dbb2aa 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -64,6 +64,20 @@ #include +#ifndef random_get_entropy +/* + * The random_get_entropy() function is used by the /dev/random driver + * in order to extract entropy via the relative unpredictability of + * when an interrupt takes places versus a high speed, fine-grained + * timing source or cycle counter. Since it will be occurred on every + * single interrupt, it must have a very low cost/overhead. + * + * By default we use get_cycles() for this purpose, but individual + * architectures may override this in their asm/timex.h header file. + */ +#define random_get_entropy() get_cycles() +#endif + /* * SHIFT_PLL is used as a dampening factor to define how much we * adjust the frequency correction for a given offset in PLL mode. From 0821f20d49d19f49e53b05ef6727e010c4b1f11d Mon Sep 17 00:00:00 2001 From: "Mingarelli, Thomas" Date: Fri, 9 Aug 2013 16:31:09 +0000 Subject: [PATCH 429/459] watchdog: hpwdt: Patch to ignore auxilary iLO devices This patch is to prevent hpwdt from loading on any auxilary iLO devices defined after the initial (or main) iLO device. All auxilary iLO devices will have a subsystem device ID set to 0x1979 in order for hpwdt to differentiate between the two types. Signed-off-by: Thomas Mingarelli Tested-by: Lisa Mitchell Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/hpwdt.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 5be5e3d14f79..19f3c3fc65f4 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -802,6 +802,12 @@ static int hpwdt_init_one(struct pci_dev *dev, return -ENODEV; } + /* + * Ignore all auxilary iLO devices with the following PCI ID + */ + if (dev->subsystem_device == 0x1979) + return -ENODEV; + if (pci_enable_device(dev)) { dev_warn(&dev->dev, "Not possible to enable PCI Device: 0x%x:0x%x.\n", From 0ff18e3734c248fa516b4be942b1196832ee936c Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Wed, 9 Oct 2013 09:26:21 +0800 Subject: [PATCH 430/459] kobject: show debug info on delayed kobject release Useful for locating buggy drivers on kernel oops. It may add dozens of new lines to boot dmesg. DEBUG_KOBJECT_RELEASE is hopefully only enabled in debug kernels (like maybe the Fedora rawhide one, or at developers), so being a bit more verbose is likely ok. Acked-by: Russell King Cc: Greg Kroah-Hartman Signed-off-by: Fengguang Wu Signed-off-by: Linus Torvalds --- lib/kobject.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/kobject.c b/lib/kobject.c index 669bf190d4fb..084f7b18d0c0 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -592,7 +592,7 @@ static void kobject_release(struct kref *kref) { struct kobject *kobj = container_of(kref, struct kobject, kref); #ifdef CONFIG_DEBUG_KOBJECT_RELEASE - pr_debug("kobject: '%s' (%p): %s, parent %p (delayed)\n", + pr_info("kobject: '%s' (%p): %s, parent %p (delayed)\n", kobject_name(kobj), kobj, __func__, kobj->parent); INIT_DELAYED_WORK(&kobj->release, kobject_delayed_cleanup); schedule_delayed_work(&kobj->release, HZ); From 2fe80d3bbf1c8bd9efc5b8154207c8dd104e7306 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Thu, 10 Oct 2013 17:31:15 -0700 Subject: [PATCH 431/459] bcache: Fix a null ptr deref regression Commit c0f04d88e46d ("bcache: Fix flushes in writeback mode") was fixing a reported data corruption bug, but it seems some last minute refactoring or rebasing introduced a null pointer deref. Signed-off-by: Kent Overstreet Cc: linux-stable # >= v3.10 Reported-by: Gabriel de Perthuis Signed-off-by: Linus Torvalds --- drivers/md/bcache/request.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/md/bcache/request.c b/drivers/md/bcache/request.c index 71eb233b9ace..b6a74bcbb08f 100644 --- a/drivers/md/bcache/request.c +++ b/drivers/md/bcache/request.c @@ -996,6 +996,7 @@ static void request_write(struct cached_dev *dc, struct search *s) closure_bio_submit(bio, cl, s->d); } else { bch_writeback_add(dc); + s->op.cache_bio = bio; if (bio->bi_rw & REQ_FLUSH) { /* Also need to send a flush to the backing device */ @@ -1008,8 +1009,6 @@ static void request_write(struct cached_dev *dc, struct search *s) flush->bi_private = cl; closure_bio_submit(flush, cl, s->d); - } else { - s->op.cache_bio = bio; } } out: From 4871c1588f92c6c13f4713a7009f25f217055807 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 9 Oct 2013 12:24:04 -0400 Subject: [PATCH 432/459] Btrfs: use right root when checking for hash collision btrfs_rename was using the root of the old dir instead of the root of the new dir when checking for a hash collision, so if you tried to move a file into a subvol it would freak out because it would see the file you are trying to move in its current root. This fixes the bug where this would fail btrfs subvol create test1 btrfs subvol create test2 mv test1 test2. Thanks to Chris Murphy for catching this, Cc: stable@vger.kernel.org Reported-by: Chris Murphy Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 8af6c03953ad..3b4ffaf0cd52 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -7986,7 +7986,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, /* check for collisions, even if the name isn't there */ - ret = btrfs_check_dir_item_collision(root, new_dir->i_ino, + ret = btrfs_check_dir_item_collision(dest, new_dir->i_ino, new_dentry->d_name.name, new_dentry->d_name.len); From 7bf811a595a895b7a886dcf218d0d34f97df76dc Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 7 Oct 2013 22:11:09 -0400 Subject: [PATCH 433/459] Btrfs: limit delalloc pages outside of find_delalloc_range Liu fixed part of this problem and unfortunately I steered him in slightly the wrong direction and so didn't completely fix the problem. The problem is we limit the size of the delalloc range we are looking for to max bytes and then we try to lock that range. If we fail to lock the pages in that range we will shrink the max bytes to a single page and re loop. However if our first page is inside of the delalloc range then we will end up limiting the end of the range to a period before our first page. This is illustrated below [0 -------- delalloc range --------- 256mb] [page] So find_delalloc_range will return with delalloc_start as 0 and end as 128mb, and then we will notice that delalloc_start < *start and adjust it up, but not adjust delalloc_end up, so things go sideways. To fix this we need to not limit the max bytes in find_delalloc_range, but in find_lock_delalloc_range and that way we don't end up with this confusion. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 43feb4663f5b..d8ea0cb200b4 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1482,10 +1482,8 @@ static noinline u64 find_delalloc_range(struct extent_io_tree *tree, cur_start = state->end + 1; node = rb_next(node); total_bytes += state->end - state->start + 1; - if (total_bytes >= max_bytes) { - *end = *start + max_bytes - 1; + if (total_bytes >= max_bytes) break; - } if (!node) break; } @@ -1627,10 +1625,9 @@ again: /* * make sure to limit the number of pages we try to lock down - * if we're looping. */ - if (delalloc_end + 1 - delalloc_start > max_bytes && loops) - delalloc_end = delalloc_start + PAGE_CACHE_SIZE - 1; + if (delalloc_end + 1 - delalloc_start > max_bytes) + delalloc_end = delalloc_start + max_bytes - 1; /* step two, lock all the pages after the page that has start */ ret = lock_delalloc_pages(inode, locked_page, @@ -1641,8 +1638,7 @@ again: */ free_extent_state(cached_state); if (!loops) { - unsigned long offset = (*start) & (PAGE_CACHE_SIZE - 1); - max_bytes = PAGE_CACHE_SIZE - offset; + max_bytes = PAGE_CACHE_SIZE; loops = 1; goto again; } else { From 14927d95464956ffe8af4278331a6bfea94ab780 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 25 Sep 2013 21:47:43 +0800 Subject: [PATCH 434/459] Btrfs: insert orphan roots into fs radix tree Now we don't drop all the deleted snapshots/subvolumes before the space balance. It means we have to relocate the space which is held by the dead snapshots/subvolumes. So we must into them into fs radix tree, or we would forget to commit the change of them when doing transaction commit, and it would corrupt the metadata. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/root-tree.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c index 0b1f4ef8db98..ec71ea44d2b4 100644 --- a/fs/btrfs/root-tree.c +++ b/fs/btrfs/root-tree.c @@ -299,11 +299,6 @@ int btrfs_find_orphan_roots(struct btrfs_root *tree_root) continue; } - if (btrfs_root_refs(&root->root_item) == 0) { - btrfs_add_dead_root(root); - continue; - } - err = btrfs_init_fs_root(root); if (err) { btrfs_free_fs_root(root); @@ -318,6 +313,9 @@ int btrfs_find_orphan_roots(struct btrfs_root *tree_root) btrfs_free_fs_root(root); break; } + + if (btrfs_root_refs(&root->root_item) == 0) + btrfs_add_dead_root(root); } btrfs_free_path(path); From c00869f1ae6a8fa49802d5e60d843b7051a112ec Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 25 Sep 2013 21:47:44 +0800 Subject: [PATCH 435/459] Btrfs: fix oops caused by the space balance and dead roots When doing space balance and subvolume destroy at the same time, we met the following oops: kernel BUG at fs/btrfs/relocation.c:2247! RIP: 0010: [] prepare_to_merge+0x154/0x1f0 [btrfs] Call Trace: [] relocate_block_group+0x466/0x4e6 [btrfs] [] btrfs_relocate_block_group+0x143/0x275 [btrfs] [] btrfs_relocate_chunk.isra.27+0x5c/0x5a2 [btrfs] [] ? btrfs_item_key_to_cpu+0x15/0x31 [btrfs] [] ? btrfs_get_token_64+0x7e/0xcd [btrfs] [] ? btrfs_tree_read_unlock_blocking+0xb2/0xb7 [btrfs] [] btrfs_balance+0x9c7/0xb6f [btrfs] [] btrfs_ioctl_balance+0x234/0x2ac [btrfs] [] btrfs_ioctl+0xd87/0x1ef9 [btrfs] [] ? path_openat+0x234/0x4db [] ? __do_page_fault+0x31d/0x391 [] ? vma_link+0x74/0x94 [] vfs_ioctl+0x1d/0x39 [] do_vfs_ioctl+0x32d/0x3e2 [] SyS_ioctl+0x57/0x83 [] ? do_page_fault+0xe/0x10 [] system_call_fastpath+0x16/0x1b It is because we returned the error number if the reference of the root was 0 when doing space relocation. It was not right here, because though the root was dead(refs == 0), but the space it held still need be relocated, or we could not remove the block group. So in this case, we should return the root no matter it is dead or not. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 9 +++++---- fs/btrfs/disk-io.h | 13 +++++++++++-- fs/btrfs/relocation.c | 2 +- 3 files changed, 17 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 4ae17ed13b32..62176ad89846 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1561,8 +1561,9 @@ int btrfs_insert_fs_root(struct btrfs_fs_info *fs_info, return ret; } -struct btrfs_root *btrfs_read_fs_root_no_name(struct btrfs_fs_info *fs_info, - struct btrfs_key *location) +struct btrfs_root *btrfs_get_fs_root(struct btrfs_fs_info *fs_info, + struct btrfs_key *location, + bool check_ref) { struct btrfs_root *root; int ret; @@ -1586,7 +1587,7 @@ struct btrfs_root *btrfs_read_fs_root_no_name(struct btrfs_fs_info *fs_info, again: root = btrfs_lookup_fs_root(fs_info, location->objectid); if (root) { - if (btrfs_root_refs(&root->root_item) == 0) + if (check_ref && btrfs_root_refs(&root->root_item) == 0) return ERR_PTR(-ENOENT); return root; } @@ -1595,7 +1596,7 @@ again: if (IS_ERR(root)) return root; - if (btrfs_root_refs(&root->root_item) == 0) { + if (check_ref && btrfs_root_refs(&root->root_item) == 0) { ret = -ENOENT; goto fail; } diff --git a/fs/btrfs/disk-io.h b/fs/btrfs/disk-io.h index b71acd6e1e5b..5ce2a7da8b11 100644 --- a/fs/btrfs/disk-io.h +++ b/fs/btrfs/disk-io.h @@ -68,8 +68,17 @@ struct btrfs_root *btrfs_read_fs_root(struct btrfs_root *tree_root, int btrfs_init_fs_root(struct btrfs_root *root); int btrfs_insert_fs_root(struct btrfs_fs_info *fs_info, struct btrfs_root *root); -struct btrfs_root *btrfs_read_fs_root_no_name(struct btrfs_fs_info *fs_info, - struct btrfs_key *location); + +struct btrfs_root *btrfs_get_fs_root(struct btrfs_fs_info *fs_info, + struct btrfs_key *key, + bool check_ref); +static inline struct btrfs_root * +btrfs_read_fs_root_no_name(struct btrfs_fs_info *fs_info, + struct btrfs_key *location) +{ + return btrfs_get_fs_root(fs_info, location, true); +} + int btrfs_cleanup_fs_roots(struct btrfs_fs_info *fs_info); void btrfs_btree_balance_dirty(struct btrfs_root *root); void btrfs_btree_balance_dirty_nodelay(struct btrfs_root *root); diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index a5a26320503f..4a355726151e 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -588,7 +588,7 @@ static struct btrfs_root *read_fs_root(struct btrfs_fs_info *fs_info, else key.offset = (u64)-1; - return btrfs_read_fs_root_no_name(fs_info, &key); + return btrfs_get_fs_root(fs_info, &key, false); } #ifdef BTRFS_COMPAT_EXTENT_TREE_V0 From cdeb5c033f0389c44e5b36cafd623bdf44bbe25c Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 26 Sep 2013 02:28:37 +0400 Subject: [PATCH 436/459] rcar-hpbdma: remove shdma_free_irq() calls Commit c1c63a14f4f2419d093acd7164eccdff315baa86 (DMA: shdma: switch to managed resource allocation) got rid of shdma_free_irq() but unfortunately got merged later than commit c4f6c41ba790bbbfcebb4c47a709ac8ff1fe1af9 (dma: add driver for R-Car HPB-DMAC), so that the HPB-DMAC driver retained the calls and got broken: drivers/dma/sh/rcar-hpbdma.c: In function `hpb_dmae_alloc_chan_resources': drivers/dma/sh/rcar-hpbdma.c:435: error: implicit declaration of function `shdma_free_irq' Fix this compilation error by removing the remaining shdma_free_irq() calls. Reported-by: Simon Horman Signed-off-by: Sergei Shtylyov Tested-by: Simon Horman Signed-off-by: Vinod Koul --- drivers/dma/sh/rcar-hpbdma.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index 45a520281ce1..b2f50d8bd755 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -432,7 +432,6 @@ hpb_dmae_alloc_chan_resources(struct hpb_dmae_chan *hpb_chan, hpb_chan->xfer_mode = XFER_DOUBLE; } else { dev_err(hpb_chan->shdma_chan.dev, "DCR setting error"); - shdma_free_irq(&hpb_chan->shdma_chan); return -EINVAL; } @@ -614,7 +613,6 @@ static void hpb_dmae_chan_remove(struct hpb_dmae_device *hpbdev) shdma_for_each_chan(schan, &hpbdev->shdma_dev, i) { BUG_ON(!schan); - shdma_free_irq(schan); shdma_chan_remove(schan); } dma_dev->chancnt = 0; From 08d08bcdee30d3a28426bd60dfbdae44b36250bc Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 26 Sep 2013 02:31:37 +0400 Subject: [PATCH 437/459] rcar-hpbdma: add parameter to set_slave() method Commit 4981c4dc194efb18f0e9a02f1b43e926f2f0d2bb (DMA: shdma: switch DT mode to use configuration data from a match table) added a new parameter to set_slave() method but unfortunately got merged later than commit c4f6c41ba790bbbfcebb4c47a (dma: add driver for R-Car HPB-DMAC), so that the HPB-DMAC driver retained the old prototype which caused this warning: drivers/dma/sh/rcar-hpbdma.c:485: warning: initialization from incompatible pointer type The newly added parameter is used to override DMA slave address from 'struct hpb_dmae_slave_config', so we have to add the 'slave_addr' field to 'struct hpb_dmae_chan', conditionally assign it in set_slave() method, and return in slave_addr() method. Signed-off-by: Sergei Shtylyov Tested-by: Simon Horman Signed-off-by: Vinod Koul --- drivers/dma/sh/rcar-hpbdma.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index b2f50d8bd755..ebad84591a6e 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -93,6 +93,7 @@ struct hpb_dmae_chan { void __iomem *base; const struct hpb_dmae_slave_config *cfg; char dev_id[16]; /* unique name per DMAC of channel */ + dma_addr_t slave_addr; }; struct hpb_dmae_device { @@ -445,7 +446,8 @@ hpb_dmae_alloc_chan_resources(struct hpb_dmae_chan *hpb_chan, return 0; } -static int hpb_dmae_set_slave(struct shdma_chan *schan, int slave_id, bool try) +static int hpb_dmae_set_slave(struct shdma_chan *schan, int slave_id, + dma_addr_t slave_addr, bool try) { struct hpb_dmae_chan *chan = to_chan(schan); const struct hpb_dmae_slave_config *sc = @@ -456,6 +458,7 @@ static int hpb_dmae_set_slave(struct shdma_chan *schan, int slave_id, bool try) if (try) return 0; chan->cfg = sc; + chan->slave_addr = slave_addr ? : sc->addr; return hpb_dmae_alloc_chan_resources(chan, sc); } @@ -467,7 +470,7 @@ static dma_addr_t hpb_dmae_slave_addr(struct shdma_chan *schan) { struct hpb_dmae_chan *chan = to_chan(schan); - return chan->cfg->addr; + return chan->slave_addr; } static struct shdma_desc *hpb_dmae_embedded_desc(void *buf, int i) From 2f6d8fad0a1636e675308088c35e863d066e0949 Mon Sep 17 00:00:00 2001 From: "Geyslan G. Bem" Date: Mon, 7 Oct 2013 19:19:58 -0300 Subject: [PATCH 438/459] dma: edma.c: remove edma_desc leakage Free memory allocated to edma_desc when failing to allocate slot. Signed-off-by: Geyslan G. Bem Signed-off-by: Vinod Koul --- drivers/dma/edma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index 098a8da450f0..3519111c566b 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -306,6 +306,7 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg( EDMA_SLOT_ANY); if (echan->slot[i] < 0) { dev_err(dev, "Failed to allocate slot\n"); + kfree(edesc); return NULL; } } From e1264ebe9ff48e1b3e1dd11805eec9f5b143ab7c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 11 Oct 2013 15:11:52 +1000 Subject: [PATCH 439/459] Revert "drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done" This reverts commit 6e1b4fdad5157bb9e88777d525704aba24389bee. This is part of a revert due to a userspace breakage, better explained in the revert of 1a1a4cbf4906a13c0c377f708df5d94168e7b582. Signed-off-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 6 ------ drivers/gpu/drm/i915/intel_display.c | 27 +++++++++++---------------- drivers/gpu/drm/i915/intel_drv.h | 1 - 3 files changed, 11 insertions(+), 23 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index c27a21034a5e..52f5ad8037cc 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1351,12 +1351,6 @@ static int i915_load_modeset_init(struct drm_device *dev) */ intel_fbdev_initial_config(dev); - /* - * Must do this after fbcon init so that - * vgacon_save_screen() works during the handover. - */ - i915_disable_vga_mem(dev); - /* Only enable hotplug handling once the fbdev is fully set up. */ dev_priv->enable_hotplug_processing = true; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c89abd33124f..aaea3ec811ed 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10038,6 +10038,15 @@ static void i915_disable_vga(struct drm_device *dev) outb(SR01, VGA_SR_INDEX); sr1 = inb(VGA_SR_DATA); outb(sr1 | 1<<5, VGA_SR_DATA); + + /* Disable VGA memory on Intel HD */ + if (HAS_PCH_SPLIT(dev)) { + outb(inb(VGA_MSR_READ) & ~VGA_MSR_MEM_EN, VGA_MSR_WRITE); + vga_set_legacy_decoding(dev->pdev, VGA_RSRC_LEGACY_IO | + VGA_RSRC_NORMAL_IO | + VGA_RSRC_NORMAL_MEM); + } + vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); udelay(300); @@ -10045,7 +10054,7 @@ static void i915_disable_vga(struct drm_device *dev) POSTING_READ(vga_reg); } -static void i915_enable_vga_mem(struct drm_device *dev) +static void i915_enable_vga(struct drm_device *dev) { /* Enable VGA memory on Intel HD */ if (HAS_PCH_SPLIT(dev)) { @@ -10059,19 +10068,6 @@ static void i915_enable_vga_mem(struct drm_device *dev) } } -void i915_disable_vga_mem(struct drm_device *dev) -{ - /* Disable VGA memory on Intel HD */ - if (HAS_PCH_SPLIT(dev)) { - vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); - outb(inb(VGA_MSR_READ) & ~VGA_MSR_MEM_EN, VGA_MSR_WRITE); - vga_set_legacy_decoding(dev->pdev, VGA_RSRC_LEGACY_IO | - VGA_RSRC_NORMAL_IO | - VGA_RSRC_NORMAL_MEM); - vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); - } -} - void intel_modeset_init_hw(struct drm_device *dev) { intel_init_power_well(dev); @@ -10350,7 +10346,6 @@ void i915_redisable_vga(struct drm_device *dev) if (I915_READ(vga_reg) != VGA_DISP_DISABLE) { DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n"); i915_disable_vga(dev); - i915_disable_vga_mem(dev); } } @@ -10564,7 +10559,7 @@ void intel_modeset_cleanup(struct drm_device *dev) intel_disable_fbc(dev); - i915_enable_vga_mem(dev); + i915_enable_vga(dev); intel_disable_gt_powersave(dev); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 28cae80495e2..9b7b68fd5d47 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -793,6 +793,5 @@ extern void hsw_pc8_disable_interrupts(struct drm_device *dev); extern void hsw_pc8_restore_interrupts(struct drm_device *dev); extern void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv); extern void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv); -extern void i915_disable_vga_mem(struct drm_device *dev); #endif /* __INTEL_DRV_H__ */ From ebff5fa9d545574324095d9c6a3cb80c9157abc5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 11 Oct 2013 15:12:04 +1000 Subject: [PATCH 440/459] Revert "i915: Update VGA arbiter support for newer devices" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 81b5c7bc8de3e6f63419139c2fc91bf81dea8a7d. Adding drm/i915 into the vga arbiter chain means that X (in a piece of well-meant paranoia) will do a get/put on the vga decoding around _every_ accel call down into the ddx. Which results in some nice performance disasters [1]. This really breaks userspace, by disabling DRI for everyone, and stops OpenGL from working, this isn't limited to just the i915 but both the integrated and discrete GPUs on multi-gpu systems, in other words this causes untold worlds of pain, Ville tried to come up with a Great Hack to fiddle the required VGA I/O ops behind everyone's back using stop_machine, but that didn't really work out [2]. Given that we're fairly late in the -rc stage for such games let's just revert this all. One thing we might want to keep is to delay the disabling of the vga decoding until the fbdev emulation and the fbcon screen is set up. If we kill vga mem decoding beforehand fbcon can end up with a white square in the top-left corner it tried to save from the vga memory for a seamless transition. And we have bug reports on older platforms which seem to match these symptoms. But again that's something to play around with in -next. References: [1] http://lists.x.org/archives/xorg-devel/2013-September/037763.html References: [2] http://www.spinics.net/lists/intel-gfx/msg34062.html Cc: Alex Williamson Cc: Ville Syrjälä Cc: Chris Wilson Signed-off-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 9 +++------ drivers/gpu/drm/i915/intel_display.c | 25 ------------------------- include/linux/vgaarb.h | 7 ------- 3 files changed, 3 insertions(+), 38 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 52f5ad8037cc..d5c784d48671 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1290,12 +1290,9 @@ static int i915_load_modeset_init(struct drm_device *dev) * then we do not take part in VGA arbitration and the * vga_client_register() fails with -ENODEV. */ - if (!HAS_PCH_SPLIT(dev)) { - ret = vga_client_register(dev->pdev, dev, NULL, - i915_vga_set_decode); - if (ret && ret != -ENODEV) - goto out; - } + ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode); + if (ret && ret != -ENODEV) + goto out; intel_register_dsm_handler(); diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index aaea3ec811ed..581fb4b2f766 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10038,15 +10038,6 @@ static void i915_disable_vga(struct drm_device *dev) outb(SR01, VGA_SR_INDEX); sr1 = inb(VGA_SR_DATA); outb(sr1 | 1<<5, VGA_SR_DATA); - - /* Disable VGA memory on Intel HD */ - if (HAS_PCH_SPLIT(dev)) { - outb(inb(VGA_MSR_READ) & ~VGA_MSR_MEM_EN, VGA_MSR_WRITE); - vga_set_legacy_decoding(dev->pdev, VGA_RSRC_LEGACY_IO | - VGA_RSRC_NORMAL_IO | - VGA_RSRC_NORMAL_MEM); - } - vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); udelay(300); @@ -10054,20 +10045,6 @@ static void i915_disable_vga(struct drm_device *dev) POSTING_READ(vga_reg); } -static void i915_enable_vga(struct drm_device *dev) -{ - /* Enable VGA memory on Intel HD */ - if (HAS_PCH_SPLIT(dev)) { - vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); - outb(inb(VGA_MSR_READ) | VGA_MSR_MEM_EN, VGA_MSR_WRITE); - vga_set_legacy_decoding(dev->pdev, VGA_RSRC_LEGACY_IO | - VGA_RSRC_LEGACY_MEM | - VGA_RSRC_NORMAL_IO | - VGA_RSRC_NORMAL_MEM); - vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); - } -} - void intel_modeset_init_hw(struct drm_device *dev) { intel_init_power_well(dev); @@ -10559,8 +10536,6 @@ void intel_modeset_cleanup(struct drm_device *dev) intel_disable_fbc(dev); - i915_enable_vga(dev); - intel_disable_gt_powersave(dev); ironlake_teardown_rc6(dev); diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index 80cf8173a65b..2c02f3a8d2ba 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -65,15 +65,8 @@ struct pci_dev; * out of the arbitration process (and can be safe to take * interrupts at any time. */ -#if defined(CONFIG_VGA_ARB) extern void vga_set_legacy_decoding(struct pci_dev *pdev, unsigned int decodes); -#else -static inline void vga_set_legacy_decoding(struct pci_dev *pdev, - unsigned int decodes) -{ -} -#endif /** * vga_get - acquire & locks VGA resources From 3f0116c3238a96bc18ad4b4acefe4e7be32fa861 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 10 Oct 2013 10:16:30 +0200 Subject: [PATCH 441/459] compiler/gcc4: Add quirk for 'asm goto' miscompilation bug Fengguang Wu, Oleg Nesterov and Peter Zijlstra tracked down a kernel crash to a GCC bug: GCC miscompiles certain 'asm goto' constructs, as outlined here: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 Implement a workaround suggested by Jakub Jelinek. Reported-and-tested-by: Fengguang Wu Reported-by: Oleg Nesterov Reported-by: Peter Zijlstra Suggested-by: Jakub Jelinek Reviewed-by: Richard Henderson Cc: Linus Torvalds Cc: Andrew Morton Cc: Signed-off-by: Ingo Molnar --- arch/arm/include/asm/jump_label.h | 2 +- arch/mips/include/asm/jump_label.h | 2 +- arch/powerpc/include/asm/jump_label.h | 2 +- arch/s390/include/asm/jump_label.h | 2 +- arch/sparc/include/asm/jump_label.h | 2 +- arch/x86/include/asm/cpufeature.h | 6 +++--- arch/x86/include/asm/jump_label.h | 2 +- arch/x86/include/asm/mutex_64.h | 4 ++-- include/linux/compiler-gcc4.h | 15 +++++++++++++++ 9 files changed, 26 insertions(+), 11 deletions(-) diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h index bfc198c75913..863c892b4aaa 100644 --- a/arch/arm/include/asm/jump_label.h +++ b/arch/arm/include/asm/jump_label.h @@ -16,7 +16,7 @@ static __always_inline bool arch_static_branch(struct static_key *key) { - asm goto("1:\n\t" + asm_volatile_goto("1:\n\t" JUMP_LABEL_NOP "\n\t" ".pushsection __jump_table, \"aw\"\n\t" ".word 1b, %l[l_yes], %c0\n\t" diff --git a/arch/mips/include/asm/jump_label.h b/arch/mips/include/asm/jump_label.h index 4d6d77ed9b9d..e194f957ca8c 100644 --- a/arch/mips/include/asm/jump_label.h +++ b/arch/mips/include/asm/jump_label.h @@ -22,7 +22,7 @@ static __always_inline bool arch_static_branch(struct static_key *key) { - asm goto("1:\tnop\n\t" + asm_volatile_goto("1:\tnop\n\t" "nop\n\t" ".pushsection __jump_table, \"aw\"\n\t" WORD_INSN " 1b, %l[l_yes], %0\n\t" diff --git a/arch/powerpc/include/asm/jump_label.h b/arch/powerpc/include/asm/jump_label.h index ae098c438f00..f016bb699b5f 100644 --- a/arch/powerpc/include/asm/jump_label.h +++ b/arch/powerpc/include/asm/jump_label.h @@ -19,7 +19,7 @@ static __always_inline bool arch_static_branch(struct static_key *key) { - asm goto("1:\n\t" + asm_volatile_goto("1:\n\t" "nop\n\t" ".pushsection __jump_table, \"aw\"\n\t" JUMP_ENTRY_TYPE "1b, %l[l_yes], %c0\n\t" diff --git a/arch/s390/include/asm/jump_label.h b/arch/s390/include/asm/jump_label.h index 6c32190dc73e..346b1c85ffb4 100644 --- a/arch/s390/include/asm/jump_label.h +++ b/arch/s390/include/asm/jump_label.h @@ -15,7 +15,7 @@ static __always_inline bool arch_static_branch(struct static_key *key) { - asm goto("0: brcl 0,0\n" + asm_volatile_goto("0: brcl 0,0\n" ".pushsection __jump_table, \"aw\"\n" ASM_ALIGN "\n" ASM_PTR " 0b, %l[label], %0\n" diff --git a/arch/sparc/include/asm/jump_label.h b/arch/sparc/include/asm/jump_label.h index 5080d16a832f..ec2e2e2aba7d 100644 --- a/arch/sparc/include/asm/jump_label.h +++ b/arch/sparc/include/asm/jump_label.h @@ -9,7 +9,7 @@ static __always_inline bool arch_static_branch(struct static_key *key) { - asm goto("1:\n\t" + asm_volatile_goto("1:\n\t" "nop\n\t" "nop\n\t" ".pushsection __jump_table, \"aw\"\n\t" diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index d3f5c63078d8..89270b4318db 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -374,7 +374,7 @@ static __always_inline __pure bool __static_cpu_has(u16 bit) * Catch too early usage of this before alternatives * have run. */ - asm goto("1: jmp %l[t_warn]\n" + asm_volatile_goto("1: jmp %l[t_warn]\n" "2:\n" ".section .altinstructions,\"a\"\n" " .long 1b - .\n" @@ -388,7 +388,7 @@ static __always_inline __pure bool __static_cpu_has(u16 bit) #endif - asm goto("1: jmp %l[t_no]\n" + asm_volatile_goto("1: jmp %l[t_no]\n" "2:\n" ".section .altinstructions,\"a\"\n" " .long 1b - .\n" @@ -453,7 +453,7 @@ static __always_inline __pure bool _static_cpu_has_safe(u16 bit) * have. Thus, we force the jump to the widest, 4-byte, signed relative * offset even though the last would often fit in less bytes. */ - asm goto("1: .byte 0xe9\n .long %l[t_dynamic] - 2f\n" + asm_volatile_goto("1: .byte 0xe9\n .long %l[t_dynamic] - 2f\n" "2:\n" ".section .altinstructions,\"a\"\n" " .long 1b - .\n" /* src offset */ diff --git a/arch/x86/include/asm/jump_label.h b/arch/x86/include/asm/jump_label.h index 64507f35800c..6a2cefb4395a 100644 --- a/arch/x86/include/asm/jump_label.h +++ b/arch/x86/include/asm/jump_label.h @@ -18,7 +18,7 @@ static __always_inline bool arch_static_branch(struct static_key *key) { - asm goto("1:" + asm_volatile_goto("1:" ".byte " __stringify(STATIC_KEY_INIT_NOP) "\n\t" ".pushsection __jump_table, \"aw\" \n\t" _ASM_ALIGN "\n\t" diff --git a/arch/x86/include/asm/mutex_64.h b/arch/x86/include/asm/mutex_64.h index e7e6751648ed..07537a44216e 100644 --- a/arch/x86/include/asm/mutex_64.h +++ b/arch/x86/include/asm/mutex_64.h @@ -20,7 +20,7 @@ static inline void __mutex_fastpath_lock(atomic_t *v, void (*fail_fn)(atomic_t *)) { - asm volatile goto(LOCK_PREFIX " decl %0\n" + asm_volatile_goto(LOCK_PREFIX " decl %0\n" " jns %l[exit]\n" : : "m" (v->counter) : "memory", "cc" @@ -75,7 +75,7 @@ static inline int __mutex_fastpath_lock_retval(atomic_t *count) static inline void __mutex_fastpath_unlock(atomic_t *v, void (*fail_fn)(atomic_t *)) { - asm volatile goto(LOCK_PREFIX " incl %0\n" + asm_volatile_goto(LOCK_PREFIX " incl %0\n" " jg %l[exit]\n" : : "m" (v->counter) : "memory", "cc" diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h index 842de225055f..ded429966c1f 100644 --- a/include/linux/compiler-gcc4.h +++ b/include/linux/compiler-gcc4.h @@ -65,6 +65,21 @@ #define __visible __attribute__((externally_visible)) #endif +/* + * GCC 'asm goto' miscompiles certain code sequences: + * + * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 + * + * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. + * Fixed in GCC 4.8.2 and later versions. + * + * (asm goto is automatically volatile - the naming reflects this.) + */ +#if GCC_VERSION <= 40801 +# define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) +#else +# define asm_volatile_goto(x...) do { asm goto(x); } while (0) +#endif #ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP #if GCC_VERSION >= 40400 From 88cfcf86aa3ada84d97195bcad74f4dadb4ae23b Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 11 Oct 2013 10:18:45 +0200 Subject: [PATCH 442/459] ALSA: hda - Fix microphone for Sony VAIO Pro 13 (Haswell model) The external mic showed up with a precense detect of "always present", essentially disabling the internal mic. Therefore turn off presence detection for this pin. Note: The external mic seems not yet working, but an internal mic is certainly better than no mic at all. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1227093 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ed9deb66f593..ae847fe006c8 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3528,6 +3528,7 @@ enum { ALC269_FIXUP_HP_GPIO_LED, ALC269_FIXUP_INV_DMIC, ALC269_FIXUP_LENOVO_DOCK, + ALC286_FIXUP_SONY_MIC_NO_PRESENCE, ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT, ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, ALC269_FIXUP_DELL2_MIC_NO_PRESENCE, @@ -3740,6 +3741,13 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc_fixup_headset_mode_no_hp_mic, }, + [ALC286_FIXUP_SONY_MIC_NO_PRESENCE] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x18, 0x01a1913c }, /* use as headset mic, without its own jack detect */ + { } + }, + }, [ALC269_FIXUP_ASUS_X101_FUNC] = { .type = HDA_FIXUP_FUNC, .v.func = alc269_fixup_x101_headset_mic, @@ -3894,6 +3902,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x8516, "ASUS X101CH", ALC269_FIXUP_ASUS_X101), + SND_PCI_QUIRK(0x104d, 0x90b6, "Sony VAIO Pro 13", ALC286_FIXUP_SONY_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x104d, 0x9073, "Sony VAIO", ALC275_FIXUP_SONY_VAIO_GPIO2), SND_PCI_QUIRK(0x104d, 0x907b, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ), SND_PCI_QUIRK(0x104d, 0x9084, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ), From 7c478f03372ad2cf434fde62082895bfcb6e6e89 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 11 Oct 2013 10:18:46 +0200 Subject: [PATCH 443/459] ALSA: hda - Add a headset mic model for ALC269 and friends Using the headset mic model will cause the headset mic to be labeled "headset mic" instead of just "mic". Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + sound/pci/hda/patch_realtek.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index f911e3656209..85c362d8ea34 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -28,6 +28,7 @@ ALC269/270/275/276/28x/29x alc269-dmic Enable ALC269(VA) digital mic workaround alc271-dmic Enable ALC271X digital mic workaround inv-dmic Inverted internal mic workaround + headset-mic Indicates a combined headset (headphone+mic) jack lenovo-dock Enables docking station I/O for some Lenovos dell-headset-multi Headset jack, which can also be used as mic-in dell-headset-dock Headset jack (without mic-in), and also dock I/O diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ae847fe006c8..79e6fe7a863a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2819,6 +2819,15 @@ static void alc269_fixup_hweq(struct hda_codec *codec, alc_write_coef_idx(codec, 0x1e, coef | 0x80); } +static void alc269_fixup_headset_mic(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + struct alc_spec *spec = codec->spec; + + if (action == HDA_FIXUP_ACT_PRE_PROBE) + spec->parse_flags |= HDA_PINCFG_HEADSET_MIC; +} + static void alc271_fixup_dmic(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -3516,6 +3525,7 @@ enum { ALC271_FIXUP_DMIC, ALC269_FIXUP_PCM_44K, ALC269_FIXUP_STEREO_DMIC, + ALC269_FIXUP_HEADSET_MIC, ALC269_FIXUP_QUANTA_MUTE, ALC269_FIXUP_LIFEBOOK, ALC269_FIXUP_AMIC, @@ -3615,6 +3625,10 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc269_fixup_stereo_dmic, }, + [ALC269_FIXUP_HEADSET_MIC] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc269_fixup_headset_mic, + }, [ALC269_FIXUP_QUANTA_MUTE] = { .type = HDA_FIXUP_FUNC, .v.func = alc269_fixup_quanta_mute, @@ -3988,6 +4002,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC269_FIXUP_STEREO_DMIC, .name = "alc269-dmic"}, {.id = ALC271_FIXUP_DMIC, .name = "alc271-dmic"}, {.id = ALC269_FIXUP_INV_DMIC, .name = "inv-dmic"}, + {.id = ALC269_FIXUP_HEADSET_MIC, .name = "headset-mic"}, {.id = ALC269_FIXUP_LENOVO_DOCK, .name = "lenovo-dock"}, {.id = ALC269_FIXUP_HP_GPIO_LED, .name = "hp-gpio-led"}, {.id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, .name = "dell-headset-multi"}, From fbc78ad62471c54ca5c10c6a7d440d1ca64d74e7 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 11 Oct 2013 13:46:04 +0200 Subject: [PATCH 444/459] ALSA: hda - Sony VAIO Pro 13 (haswell) now has a working headset jack Just got the positive confirmation from a tester: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1227093/comments/28 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 79e6fe7a863a..bf313bea7085 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3761,6 +3761,8 @@ static const struct hda_fixup alc269_fixups[] = { { 0x18, 0x01a1913c }, /* use as headset mic, without its own jack detect */ { } }, + .chained = true, + .chain_id = ALC269_FIXUP_HEADSET_MIC }, [ALC269_FIXUP_ASUS_X101_FUNC] = { .type = HDA_FIXUP_FUNC, From 5b24282846c064ee90d40fcb3a8f63b8e754fd28 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 10 Oct 2013 19:33:57 +0530 Subject: [PATCH 445/459] ARC: Ignore ptrace SETREGSET request for synthetic register "stop_pc" ARCompact TRAP_S insn used for breakpoints, commits before exception is taken (updating architectural PC). So ptregs->ret contains next-PC and not the breakpoint PC itself. This is different from other restartable exceptions such as TLB Miss where ptregs->ret has exact faulting PC. gdb needs to know exact-PC hence ARC ptrace GETREGSET provides for @stop_pc which returns ptregs->ret vs. EFA depending on the situation. However, writing stop_pc (SETREGSET request), which updates ptregs->ret doesn't makes sense stop_pc doesn't always correspond to that reg as described above. This was not an issue so far since user_regs->ret / user_regs->stop_pc had same value and both writing to ptregs->ret was OK, needless, but NOT broken, hence not observed. With gdb "jump", they diverge, and user_regs->ret updating ptregs is overwritten immediately with stop_pc, which this patch fixes. Reported-by: Anton Kolesov Signed-off-by: Vineet Gupta --- arch/arc/kernel/ptrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arc/kernel/ptrace.c b/arch/arc/kernel/ptrace.c index 333238564b67..5d76706139dd 100644 --- a/arch/arc/kernel/ptrace.c +++ b/arch/arc/kernel/ptrace.c @@ -102,7 +102,7 @@ static int genregs_set(struct task_struct *target, REG_IGNORE_ONE(pad2); REG_IN_CHUNK(callee, efa, cregs); /* callee_regs[r25..r13] */ REG_IGNORE_ONE(efa); /* efa update invalid */ - REG_IN_ONE(stop_pc, &ptregs->ret); /* stop_pc: PC update */ + REG_IGNORE_ONE(stop_pc); /* PC updated via @ret */ return ret; } From 6e4ea8e33b2057b85d75175dd89b93f5e26de3bc Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 10 Oct 2013 20:05:35 -0400 Subject: [PATCH 446/459] ext4: fix memory leak in xattr If we take the 2nd retry path in ext4_expand_extra_isize_ea, we potentionally return from the function without having freed these allocations. If we don't do the return, we over-write the previous allocation pointers, so we leak either way. Spotted with Coverity. [ Fixed by tytso to set is and bs to NULL after freeing these pointers, in case in the retry loop we later end up triggering an error causing a jump to cleanup, at which point we could have a double free bug. -- Ted ] Signed-off-by: Dave Jones Signed-off-by: "Theodore Ts'o" Reviewed-by: Eric Sandeen Cc: stable@vger.kernel.org --- fs/ext4/xattr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index c081e34f717f..03e9bebba198 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1350,6 +1350,8 @@ retry: s_min_extra_isize) { tried_min_extra_isize++; new_extra_isize = s_min_extra_isize; + kfree(is); is = NULL; + kfree(bs); bs = NULL; goto retry; } error = -1; From 9d05746e7b16d8565dddbe3200faa1e669d23bbf Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 30 Sep 2013 08:35:10 -0700 Subject: [PATCH 447/459] vfs: allow O_PATH file descriptors for fstatfs() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Olga reported that file descriptors opened with O_PATH do not work with fstatfs(), found during further development of ksh93's thread support. There is no reason to not allow O_PATH file descriptors here (fstatfs is very much a path operation), so use "fdget_raw()". See commit 55815f70147d ("vfs: make O_PATH file descriptors usable for 'fstat()'") for a very similar issue reported for fstat() by the same team. Reported-and-tested-by: ольга крыжановская Acked-by: Al Viro Cc: stable@kernel.org # O_PATH introduced in 3.0+ Signed-off-by: Linus Torvalds --- fs/statfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/statfs.c b/fs/statfs.c index c219e733f553..083dc0ac9140 100644 --- a/fs/statfs.c +++ b/fs/statfs.c @@ -94,7 +94,7 @@ retry: int fd_statfs(int fd, struct kstatfs *st) { - struct fd f = fdget(fd); + struct fd f = fdget_raw(fd); int error = -EBADF; if (f.file) { error = vfs_statfs(&f.file->f_path, st); From 320c90be7ba1c371e882edff57272a89b213d136 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 5 Sep 2013 11:33:15 +0200 Subject: [PATCH 448/459] parisc: Export flush_cache_page() (needed by lustre) ERROR: "flush_cache_page" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined! Signed-off-by: Geert Uytterhoeven Signed-off-by: Helge Deller --- arch/parisc/kernel/cache.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index c035673209f7..b521c0adf4ec 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -602,6 +602,7 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long __flush_cache_page(vma, vmaddr, PFN_PHYS(pfn)); } } +EXPORT_SYMBOL_GPL(flush_cache_page); #ifdef CONFIG_PARISC_TMPALIAS From 528d8eb20a3053d72cb0cea486418aa602d9e1f1 Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Thu, 12 Sep 2013 00:07:18 +0800 Subject: [PATCH 449/459] parisc: kill SMP single function call interrupt Commit 9a46ad6d6df3b54 "smp: make smp_call_function_many() use logic similar to smp_call_function_single()" has unified the way to handle single and multiple cross-CPU function calls. Now only one interrupt is needed for architecture specific code to support generic SMP function call interfaces, so kill the redundant single function call interrupt. Signed-off-by: Jiang Liu Cc: Jiang Liu Signed-off-by: Helge Deller --- arch/parisc/kernel/smp.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c index 8a252f2d6c08..2b96602e812f 100644 --- a/arch/parisc/kernel/smp.c +++ b/arch/parisc/kernel/smp.c @@ -72,7 +72,6 @@ enum ipi_message_type { IPI_NOP=0, IPI_RESCHEDULE=1, IPI_CALL_FUNC, - IPI_CALL_FUNC_SINGLE, IPI_CPU_START, IPI_CPU_STOP, IPI_CPU_TEST @@ -164,11 +163,6 @@ ipi_interrupt(int irq, void *dev_id) generic_smp_call_function_interrupt(); break; - case IPI_CALL_FUNC_SINGLE: - smp_debug(100, KERN_DEBUG "CPU%d IPI_CALL_FUNC_SINGLE\n", this_cpu); - generic_smp_call_function_single_interrupt(); - break; - case IPI_CPU_START: smp_debug(100, KERN_DEBUG "CPU%d IPI_CPU_START\n", this_cpu); break; @@ -260,7 +254,7 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask) void arch_send_call_function_single_ipi(int cpu) { - send_IPI_single(cpu, IPI_CALL_FUNC_SINGLE); + send_IPI_single(cpu, IPI_CALL_FUNC); } /* From ec7c241953d14af097d941de56348c55e4e9ac5d Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 9 Oct 2013 23:10:14 +0200 Subject: [PATCH 450/459] parisc: remove unused syscall_ipi() function. Signed-off-by: Helge Deller --- arch/parisc/kernel/traps.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index 04e47c6a4562..ebc877c28583 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -291,11 +291,6 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err) do_exit(SIGSEGV); } -int syscall_ipi(int (*syscall) (struct pt_regs *), struct pt_regs *regs) -{ - return syscall(regs); -} - /* gdb uses break 4,8 */ #define GDB_BREAK_INSN 0x10004 static void handle_gdb_break(struct pt_regs *regs, int wot) From a60ac4b5f0b630889a01293db52ac65003a01e98 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 9 Oct 2013 23:12:46 +0200 Subject: [PATCH 451/459] parisc: mark parisc_terminate() noreturn and cold. Signed-off-by: Helge Deller --- arch/parisc/include/asm/traps.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/include/asm/traps.h b/arch/parisc/include/asm/traps.h index 1945f995f2df..4736020ba5ea 100644 --- a/arch/parisc/include/asm/traps.h +++ b/arch/parisc/include/asm/traps.h @@ -6,7 +6,7 @@ struct pt_regs; /* traps.c */ void parisc_terminate(char *msg, struct pt_regs *regs, - int code, unsigned long offset); + int code, unsigned long offset) __noreturn __cold; /* mm/fault.c */ void do_page_fault(struct pt_regs *regs, unsigned long code, From 59b33f148cc08fb33cbe823fca1e34f7f023765e Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 1 Oct 2013 21:54:46 +0200 Subject: [PATCH 452/459] parisc: fix interruption handler to respect pagefault_disable() Running an "echo t > /proc/sysrq-trigger" crashes the parisc kernel. The problem is, that in print_worker_info() we try to read the workqueue info via the probe_kernel_read() functions which use pagefault_disable() to avoid crashes like this: probe_kernel_read(&pwq, &worker->current_pwq, sizeof(pwq)); probe_kernel_read(&wq, &pwq->wq, sizeof(wq)); probe_kernel_read(name, wq->name, sizeof(name) - 1); The problem here is, that the first probe_kernel_read(&pwq) might return zero in pwq and as such the following probe_kernel_reads() try to access contents of the page zero which is read protected and generate a kernel segfault. With this patch we fix the interruption handler to call parisc_terminate() directly only if pagefault_disable() was not called (in which case preempt_count()==0). Otherwise we hand over to the pagefault handler which will try to look up the faulting address in the fixup tables. Signed-off-by: Helge Deller Cc: # v3.0+ Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/kernel/traps.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index ebc877c28583..1cd1d0c83b6d 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -800,14 +800,14 @@ void notrace handle_interruption(int code, struct pt_regs *regs) else { /* - * The kernel should never fault on its own address space. + * The kernel should never fault on its own address space, + * unless pagefault_disable() was called before. */ - if (fault_space == 0) + if (fault_space == 0 && !in_atomic()) { pdc_chassis_send_status(PDC_CHASSIS_DIRECT_PANIC); parisc_terminate("Kernel Fault", regs, code, fault_address); - } } From 2d8b22de6e5241a6f27f7f290f027223156a7d3f Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Sat, 5 Oct 2013 10:55:36 -0400 Subject: [PATCH 453/459] parisc: optimize variable initialization in do_page_fault The attached change defers the initialization of the variables tsk, mm and flags until they are needed. As a result, the code won't crash if a kernel probe is done with a corrupt context and the code will be better optimized. Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/mm/fault.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index 00c0ed333a3d..0293588d5b8c 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -171,20 +171,25 @@ void do_page_fault(struct pt_regs *regs, unsigned long code, unsigned long address) { struct vm_area_struct *vma, *prev_vma; - struct task_struct *tsk = current; - struct mm_struct *mm = tsk->mm; + struct task_struct *tsk; + struct mm_struct *mm; unsigned long acc_type; int fault; - unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; + unsigned int flags; - if (in_atomic() || !mm) + if (in_atomic()) goto no_context; + tsk = current; + mm = tsk->mm; + if (!mm) + goto no_context; + + flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; if (user_mode(regs)) flags |= FAULT_FLAG_USER; acc_type = parisc_acctyp(code, regs->iir); - if (acc_type & VM_WRITE) flags |= FAULT_FLAG_WRITE; retry: From db080f9c530f78dad661257885a1893506077068 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 9 Oct 2013 23:47:03 +0200 Subject: [PATCH 454/459] parisc: let probe_kernel_read() capture access to page zero Signed-off-by: Helge Deller --- arch/parisc/lib/memcpy.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c index ac4370b1ca40..b5507ec06b84 100644 --- a/arch/parisc/lib/memcpy.c +++ b/arch/parisc/lib/memcpy.c @@ -56,7 +56,7 @@ #ifdef __KERNEL__ #include #include -#include +#include #define s_space "%%sr1" #define d_space "%%sr2" #else @@ -524,4 +524,17 @@ EXPORT_SYMBOL(copy_to_user); EXPORT_SYMBOL(copy_from_user); EXPORT_SYMBOL(copy_in_user); EXPORT_SYMBOL(memcpy); + +long probe_kernel_read(void *dst, const void *src, size_t size) +{ + unsigned long addr = (unsigned long)src; + + if (size < 0 || addr < PAGE_SIZE) + return -EFAULT; + + /* check for I/O space F_EXTEND(0xfff00000) access as well? */ + + return __probe_kernel_read(dst, src, size); +} + #endif From 4d594dd3028ba8cdfcbd854bde3811a1ee4e36d7 Mon Sep 17 00:00:00 2001 From: Yuvaraj Kumar C D Date: Wed, 18 Sep 2013 15:41:53 +0530 Subject: [PATCH 455/459] ARM: exynos: dts: Update 5250 arch timer node with clock frequency Without the "clock-frequency" property in arch timer node, could able to see the below crash dump. [] (unwind_backtrace+0x0/0xf4) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x7c/0xb0) [] (dump_stack+0x7c/0xb0) from [] (Ldiv0_64+0x8/0x18) [] (Ldiv0_64+0x8/0x18) from [] (clockevents_config.part.2+0x1c/0x74) [] (clockevents_config.part.2+0x1c/0x74) from [] (clockevents_config_and_register+0x20/0x2c) [] (clockevents_config_and_register+0x20/0x2c) from [] (arch_timer_setup+0xa8/0x134) [] (arch_timer_setup+0xa8/0x134) from [] (arch_timer_init+0x1f4/0x24c) [] (arch_timer_init+0x1f4/0x24c) from [] (clocksource_of_init+0x34/0x58) [] (clocksource_of_init+0x34/0x58) from [] (time_init+0x20/0x2c) [] (time_init+0x20/0x2c) from [] (start_kernel+0x1e0/0x39c) THis is because the Exynos u-boot, for example on the Chromebooks, doesn't set up the CNTFRQ register as expected by arch_timer. Instead, we have to specify the frequency in the device tree like this. Signed-off-by: Yuvaraj Kumar C D [olof: Changed subject, added comment, elaborated on commit message] Signed-off-by: Olof Johansson --- arch/arm/boot/dts/exynos5250.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 7d7cc777ff7b..bbac42a78ce5 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -96,6 +96,11 @@ <1 14 0xf08>, <1 11 0xf08>, <1 10 0xf08>; + /* Unfortunately we need this since some versions of U-Boot + * on Exynos don't set the CNTFRQ register, so we need the + * value from DT. + */ + clock-frequency = <24000000>; }; mct@101C0000 { From 8612ed0d97abcf1c016d34755b7cf2060de71963 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 23 Aug 2013 11:40:59 +0300 Subject: [PATCH 456/459] watchdog: ts72xx_wdt: locking bug in ioctl Calling the WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS and twice will cause a interruptible deadlock. Signed-off-by: Dan Carpenter Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ts72xx_wdt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/watchdog/ts72xx_wdt.c b/drivers/watchdog/ts72xx_wdt.c index 42913f131dc2..c9b0c627fe7e 100644 --- a/drivers/watchdog/ts72xx_wdt.c +++ b/drivers/watchdog/ts72xx_wdt.c @@ -310,7 +310,8 @@ static long ts72xx_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - return put_user(0, p); + error = put_user(0, p); + break; case WDIOC_KEEPALIVE: ts72xx_wdt_kick(wdt); From 4c4e45669de475573b15d968a6dca8d00124c9ad Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Mon, 23 Sep 2013 19:16:57 +0900 Subject: [PATCH 457/459] watchdog: kempld_wdt: Fix bit mask definition STAGE_CFG bits are defined as [5:4] bits. However, '(((x) & 0x30) << 4)' handles [9:8] bits. Thus, it should be fixed in order to handle [5:4] bits. Signed-off-by: Jingoo Han Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/kempld_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/kempld_wdt.c b/drivers/watchdog/kempld_wdt.c index 491419e0772a..5c3d4df63e68 100644 --- a/drivers/watchdog/kempld_wdt.c +++ b/drivers/watchdog/kempld_wdt.c @@ -35,7 +35,7 @@ #define KEMPLD_WDT_STAGE_TIMEOUT(x) (0x1b + (x) * 4) #define KEMPLD_WDT_STAGE_CFG(x) (0x18 + (x)) #define STAGE_CFG_GET_PRESCALER(x) (((x) & 0x30) >> 4) -#define STAGE_CFG_SET_PRESCALER(x) (((x) & 0x30) << 4) +#define STAGE_CFG_SET_PRESCALER(x) (((x) & 0x3) << 4) #define STAGE_CFG_PRESCALER_MASK 0x30 #define STAGE_CFG_ACTION_MASK 0x7 #define STAGE_CFG_ASSERT (1 << 3) From 1d5898b4f8a0f6e231546d30dd54f6f9b89c232c Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 5 Oct 2013 16:20:17 +0200 Subject: [PATCH 458/459] watchdog: sunxi: Fix section mismatch This driver has a section mismatch, for probe and remove functions, leading to the following warning during the compilation. WARNING: drivers/watchdog/built-in.o(.data+0x24): Section mismatch in reference from the variable sunxi_wdt_driver to the function .init.text:sunxi_wdt_probe() The variable sunxi_wdt_driver references the function __init sunxi_wdt_probe() Signed-off-by: Maxime Ripard Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sunxi_wdt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/watchdog/sunxi_wdt.c b/drivers/watchdog/sunxi_wdt.c index 1f94b42764aa..f6caa77151c7 100644 --- a/drivers/watchdog/sunxi_wdt.c +++ b/drivers/watchdog/sunxi_wdt.c @@ -146,7 +146,7 @@ static const struct watchdog_ops sunxi_wdt_ops = { .set_timeout = sunxi_wdt_set_timeout, }; -static int __init sunxi_wdt_probe(struct platform_device *pdev) +static int sunxi_wdt_probe(struct platform_device *pdev) { struct sunxi_wdt_dev *sunxi_wdt; struct resource *res; @@ -187,7 +187,7 @@ static int __init sunxi_wdt_probe(struct platform_device *pdev) return 0; } -static int __exit sunxi_wdt_remove(struct platform_device *pdev) +static int sunxi_wdt_remove(struct platform_device *pdev) { struct sunxi_wdt_dev *sunxi_wdt = platform_get_drvdata(pdev); From 61e6cfa80de5760bbe406f4e815b7739205754d2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 13 Oct 2013 15:41:28 -0700 Subject: [PATCH 459/459] Linux 3.12-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 9de9aba21bf9..deec08b7612b 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 12 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = One Giant Leap for Frogkind # *DOCUMENTATION*