From b294a290d24d1196d68399cc3a9b8c50bfb55abd Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Tue, 30 Jun 2009 02:13:01 -0400 Subject: [PATCH 01/18] Revert "power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL" This reverts commit 8efe444038a205e79b38b7ad03878824901849a8 and 4cbc76eadf56399cd11fb736b33c53aec9caab8c. Richard@laptop.org was apparently using CAPACITY_LEVEL for debugging battery/EC problems, and was upset that it was removed. This readds it. Conflicts: Documentation/power_supply_class.txt Signed-off-by: Andres Salomon Signed-off-by: Anton Vorontsov --- Documentation/power/power_supply_class.txt | 2 ++ drivers/power/olpc_battery.c | 9 +++++++++ drivers/power/power_supply_sysfs.c | 6 ++++++ include/linux/power_supply.h | 10 ++++++++++ 4 files changed, 27 insertions(+) diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index c6cd4956047c..709d95571d7b 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -108,6 +108,8 @@ relative, time-based measurements. ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. CAPACITY - capacity in percents. +CAPACITY_LEVEL - capacity level. This corresponds to +POWER_SUPPLY_CAPACITY_LEVEL_*. TEMP - temperature of the power supply. TEMP_AMBIENT - ambient temperature. diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 58e419299cd6..3a589df09376 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -276,6 +276,14 @@ static int olpc_bat_get_property(struct power_supply *psy, return ret; val->intval = ec_byte; break; + case POWER_SUPPLY_PROP_CAPACITY_LEVEL: + if (ec_byte & BAT_STAT_FULL) + val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL; + else if (ec_byte & BAT_STAT_LOW) + val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW; + else + val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; + break; case POWER_SUPPLY_PROP_TEMP: ret = olpc_ec_cmd(EC_BAT_TEMP, NULL, 0, (void *)&ec_word, 2); if (ret) @@ -321,6 +329,7 @@ static enum power_supply_property olpc_bat_props[] = { POWER_SUPPLY_PROP_VOLTAGE_AVG, POWER_SUPPLY_PROP_CURRENT_AVG, POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TEMP_AMBIENT, POWER_SUPPLY_PROP_MANUFACTURER, diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index da73591017f9..9deabbde6fd6 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -51,6 +51,9 @@ static ssize_t power_supply_show_property(struct device *dev, "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd", "LiMn" }; + static char *capacity_level_text[] = { + "Unknown", "Critical", "Low", "Normal", "High", "Full" + }; ssize_t ret; struct power_supply *psy = dev_get_drvdata(dev); const ptrdiff_t off = attr - power_supply_attrs; @@ -71,6 +74,8 @@ static ssize_t power_supply_show_property(struct device *dev, return sprintf(buf, "%s\n", health_text[value.intval]); else if (off == POWER_SUPPLY_PROP_TECHNOLOGY) return sprintf(buf, "%s\n", technology_text[value.intval]); + else if (off == POWER_SUPPLY_PROP_CAPACITY_LEVEL) + return sprintf(buf, "%s\n", capacity_level_text[value.intval]); else if (off >= POWER_SUPPLY_PROP_MODEL_NAME) return sprintf(buf, "%s\n", value.strval); @@ -109,6 +114,7 @@ static struct device_attribute power_supply_attrs[] = { POWER_SUPPLY_ATTR(energy_now), POWER_SUPPLY_ATTR(energy_avg), POWER_SUPPLY_ATTR(capacity), + POWER_SUPPLY_ATTR(capacity_level), POWER_SUPPLY_ATTR(temp), POWER_SUPPLY_ATTR(temp_ambient), POWER_SUPPLY_ATTR(time_to_empty_now), diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 594c494ac3f0..0ab6aa171241 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -58,6 +58,15 @@ enum { POWER_SUPPLY_TECHNOLOGY_LiMn, }; +enum { + POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0, + POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL, + POWER_SUPPLY_CAPACITY_LEVEL_LOW, + POWER_SUPPLY_CAPACITY_LEVEL_NORMAL, + POWER_SUPPLY_CAPACITY_LEVEL_HIGH, + POWER_SUPPLY_CAPACITY_LEVEL_FULL, +}; + enum power_supply_property { /* Properties of type `int' */ POWER_SUPPLY_PROP_STATUS = 0, @@ -89,6 +98,7 @@ enum power_supply_property { POWER_SUPPLY_PROP_ENERGY_NOW, POWER_SUPPLY_PROP_ENERGY_AVG, POWER_SUPPLY_PROP_CAPACITY, /* in percents! */ + POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TEMP_AMBIENT, POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, From 144bbeaedc53290eab21da82ce1cb5faefd14374 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Tue, 30 Jun 2009 02:15:26 -0400 Subject: [PATCH 02/18] olpc_battery: Add an 'error' sysfs device that displays raw errors Grab the error code from EC_BAT_ERRCODE and let the user see it (rather than attempting to decode it as we do with PROP_HEALTH) with a separate error sysfs file. Signed-off-by: Andres Salomon Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 3a589df09376..602bbd008f78 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -10,7 +10,9 @@ #include #include +#include #include +#include #include #include #include @@ -379,6 +381,29 @@ static struct bin_attribute olpc_bat_eeprom = { .read = olpc_bat_eeprom_read, }; +/* Allow userspace to see the specific error value pulled from the EC */ + +static ssize_t olpc_bat_error_read(struct device *dev, + struct device_attribute *attr, char *buf) +{ + uint8_t ec_byte; + ssize_t ret; + + ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ec_byte); +} + +static struct device_attribute olpc_bat_error = { + .attr = { + .name = "error", + .mode = S_IRUGO, + }, + .show = olpc_bat_error_read, +}; + /********************************************************************* * Initialisation *********************************************************************/ @@ -442,8 +467,14 @@ static int __init olpc_bat_init(void) if (ret) goto eeprom_failed; + ret = device_create_file(olpc_bat.dev, &olpc_bat_error); + if (ret) + goto error_failed; + goto success; +error_failed: + device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom); eeprom_failed: power_supply_unregister(&olpc_bat); battery_failed: @@ -456,6 +487,7 @@ success: static void __exit olpc_bat_exit(void) { + device_remove_file(olpc_bat.dev, &olpc_bat_error); device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom); power_supply_unregister(&olpc_bat); power_supply_unregister(&olpc_ac); From ee8076ed3e1cdd0cd1e61318386932669c90b92f Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 2 Jul 2009 09:45:18 -0400 Subject: [PATCH 03/18] power_supply: Add a charge_type property, and use it for olpc driver This adds a new sysfs file called 'charge_type' which displays the type of charging (unknown, n/a, trickle charge, or fast charging). This allows things like battery diagnostics to determine what the battery/EC is doing without resorting to changing the 'status' sysfs output. Signed-off-by: Andres Salomon Acked-by: Mark Brown Signed-off-by: Anton Vorontsov --- Documentation/power/power_supply_class.txt | 5 +++++ drivers/power/olpc_battery.c | 9 +++++++++ drivers/power/power_supply_sysfs.c | 6 ++++++ include/linux/power_supply.h | 8 ++++++++ 4 files changed, 28 insertions(+) diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index 709d95571d7b..9f16c5178b66 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -76,6 +76,11 @@ STATUS - this attribute represents operating status (charging, full, discharging (i.e. powering a load), etc.). This corresponds to BATTERY_STATUS_* values, as defined in battery.h. +CHARGE_TYPE - batteries can typically charge at different rates. +This defines trickle and fast charges. For batteries that +are already charged or discharging, 'n/a' can be displayed (or +'unknown', if the status is not known). + HEALTH - represents health of the battery, values corresponds to POWER_SUPPLY_HEALTH_*, defined in battery.h. diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 602bbd008f78..8fefe5a73558 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -233,6 +233,14 @@ static int olpc_bat_get_property(struct power_supply *psy, if (ret) return ret; break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + if (ec_byte & BAT_STAT_TRICKLE) + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + else if (ec_byte & BAT_STAT_CHARGING) + val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; + else + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; case POWER_SUPPLY_PROP_PRESENT: val->intval = !!(ec_byte & (BAT_STAT_PRESENT | BAT_STAT_TRICKLE)); @@ -325,6 +333,7 @@ static int olpc_bat_get_property(struct power_supply *psy, static enum power_supply_property olpc_bat_props[] = { POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_HEALTH, POWER_SUPPLY_PROP_TECHNOLOGY, diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index 9deabbde6fd6..08144393d64b 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -43,6 +43,9 @@ static ssize_t power_supply_show_property(struct device *dev, static char *status_text[] = { "Unknown", "Charging", "Discharging", "Not charging", "Full" }; + static char *charge_type[] = { + "Unknown", "N/A", "Trickle", "Fast" + }; static char *health_text[] = { "Unknown", "Good", "Overheat", "Dead", "Over voltage", "Unspecified failure", "Cold", @@ -70,6 +73,8 @@ static ssize_t power_supply_show_property(struct device *dev, if (off == POWER_SUPPLY_PROP_STATUS) return sprintf(buf, "%s\n", status_text[value.intval]); + else if (off == POWER_SUPPLY_PROP_CHARGE_TYPE) + return sprintf(buf, "%s\n", charge_type[value.intval]); else if (off == POWER_SUPPLY_PROP_HEALTH) return sprintf(buf, "%s\n", health_text[value.intval]); else if (off == POWER_SUPPLY_PROP_TECHNOLOGY) @@ -86,6 +91,7 @@ static ssize_t power_supply_show_property(struct device *dev, static struct device_attribute power_supply_attrs[] = { /* Properties of type `int' */ POWER_SUPPLY_ATTR(status), + POWER_SUPPLY_ATTR(charge_type), POWER_SUPPLY_ATTR(health), POWER_SUPPLY_ATTR(present), POWER_SUPPLY_ATTR(online), diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 0ab6aa171241..4c7c6fc35487 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -38,6 +38,13 @@ enum { POWER_SUPPLY_STATUS_FULL, }; +enum { + POWER_SUPPLY_CHARGE_TYPE_UNKNOWN = 0, + POWER_SUPPLY_CHARGE_TYPE_NONE, + POWER_SUPPLY_CHARGE_TYPE_TRICKLE, + POWER_SUPPLY_CHARGE_TYPE_FAST, +}; + enum { POWER_SUPPLY_HEALTH_UNKNOWN = 0, POWER_SUPPLY_HEALTH_GOOD, @@ -70,6 +77,7 @@ enum { enum power_supply_property { /* Properties of type `int' */ POWER_SUPPLY_PROP_STATUS = 0, + POWER_SUPPLY_PROP_CHARGE_TYPE, POWER_SUPPLY_PROP_HEALTH, POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_ONLINE, From 4aed03ae58946c716c8e3f7060f8b500b8a8e30f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 10 Jul 2009 16:28:33 +0100 Subject: [PATCH 04/18] wm8350_power: Implement charge type property Signed-off-by: Mark Brown Signed-off-by: Anton Vorontsov --- drivers/power/wm8350_power.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/power/wm8350_power.c b/drivers/power/wm8350_power.c index 1b16bf343f2f..28b0299c0043 100644 --- a/drivers/power/wm8350_power.c +++ b/drivers/power/wm8350_power.c @@ -321,6 +321,24 @@ static int wm8350_bat_check_health(struct wm8350 *wm8350) return POWER_SUPPLY_HEALTH_GOOD; } +static int wm8350_bat_get_charge_type(struct wm8350 *wm8350) +{ + int state; + + state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2) & + WM8350_CHG_STS_MASK; + switch (state) { + case WM8350_CHG_STS_OFF: + return POWER_SUPPLY_CHARGE_TYPE_NONE; + case WM8350_CHG_STS_TRICKLE: + return POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + case WM8350_CHG_STS_FAST: + return POWER_SUPPLY_CHARGE_TYPE_FAST; + default: + return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN; + } +} + static int wm8350_bat_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -342,6 +360,9 @@ static int wm8350_bat_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_HEALTH: val->intval = wm8350_bat_check_health(wm8350); break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + val->intval = wm8350_bat_get_charge_type(wm8350); + break; default: ret = -EINVAL; break; @@ -355,6 +376,7 @@ static enum power_supply_property wm8350_bat_props[] = { POWER_SUPPLY_PROP_ONLINE, POWER_SUPPLY_PROP_VOLTAGE_NOW, POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_CHARGE_TYPE, }; /********************************************************************* From 2e83a5c5d2317c386de2880eb43ef0bef8eb1fa9 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 15 Jul 2009 18:20:38 +0200 Subject: [PATCH 05/18] ds2760_battery: delay power supply registration This fixes a race condition I recently introduced with the PMOD feature addition (cef437e3: "w1: ds2760_battery: add support for sleep mode feature"). Postpone the call to power_supply_register() to fix it. Signed-off-by: Daniel Mack Cc: Szabolcs Gyurko Acked-by: Matt Reimer Signed-off-by: Anton Vorontsov --- drivers/power/ds2760_battery.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index 520b5c49ff30..cf07c43e90cd 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -381,12 +381,6 @@ static int ds2760_battery_probe(struct platform_device *pdev) di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN; - retval = power_supply_register(&pdev->dev, &di->bat); - if (retval) { - dev_err(di->dev, "failed to register battery\n"); - goto batt_failed; - } - /* enable sleep mode feature */ ds2760_battery_read_status(di); status = di->raw[DS2760_STATUS_REG]; @@ -397,6 +391,12 @@ static int ds2760_battery_probe(struct platform_device *pdev) ds2760_battery_write_status(di, status); + retval = power_supply_register(&pdev->dev, &di->bat); + if (retval) { + dev_err(di->dev, "failed to register battery\n"); + goto batt_failed; + } + INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work); di->monitor_wqueue = create_singlethread_workqueue(dev_name(&pdev->dev)); if (!di->monitor_wqueue) { From 5c6e9bf2c96e746237516bc8897add67682ee452 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 15 Jul 2009 18:20:39 +0200 Subject: [PATCH 06/18] ds2760_battery: export more features Export POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW and POWER_SUPPLY_PROP_CAPACITY features to the power supply core. Signed-off-by: Daniel Mack Cc: Szabolcs Gyurko Acked-by: Matt Reimer Signed-off-by: Anton Vorontsov --- drivers/power/ds2760_battery.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index cf07c43e90cd..f439071c2aa2 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -337,6 +337,12 @@ static int ds2760_battery_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_TEMP: val->intval = di->temp_C; break; + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: + val->intval = di->life_sec; + break; + case POWER_SUPPLY_PROP_CAPACITY: + val->intval = di->rem_capacity; + break; default: return -EINVAL; } @@ -353,6 +359,8 @@ static enum power_supply_property ds2760_battery_props[] = { POWER_SUPPLY_PROP_CHARGE_EMPTY, POWER_SUPPLY_PROP_CHARGE_NOW, POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_CAPACITY, }; static int ds2760_battery_probe(struct platform_device *pdev) From c1e72193ea3fa02e96bf3aa66006e18d107d0266 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 15 Jul 2009 18:20:40 +0200 Subject: [PATCH 07/18] ds2760_battery: add rated_capacity module parameter For systems where the ds2760 is soldered directly on the PCB, the 'rated capacity' register is not set to anything useful. In order to allow users to bootstrap this value, introduce a new module parameter 'rated_capacity' and use it to write the internal EEPROM in case the value differes from what's been given. Signed-off-by: Daniel Mack Cc: Szabolcs Gyurko Acked-by: Matt Reimer Signed-off-by: Anton Vorontsov --- drivers/power/ds2760_battery.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index f439071c2aa2..ed0ea5e275c5 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -66,6 +66,10 @@ static unsigned int pmod_enabled; module_param(pmod_enabled, bool, 0644); MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit"); +static unsigned int rated_capacity; +module_param(rated_capacity, uint, 0644); +MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index"); + /* Some batteries have their rated capacity stored a N * 10 mAh, while * others use an index into this table. */ static int rated_capacities[] = { @@ -274,6 +278,17 @@ static void ds2760_battery_write_status(struct ds2760_device_info *di, w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1); } +static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di, + unsigned char rated_capacity) +{ + if (rated_capacity == di->raw[DS2760_RATED_CAPACITY]) + return; + + w1_ds2760_write(di->w1_dev, &rated_capacity, DS2760_RATED_CAPACITY, 1); + w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1); + w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1); +} + static void ds2760_battery_work(struct work_struct *work) { struct ds2760_device_info *di = container_of(work, @@ -399,6 +414,10 @@ static int ds2760_battery_probe(struct platform_device *pdev) ds2760_battery_write_status(di, status); + /* set rated capacity from module param */ + if (rated_capacity) + ds2760_battery_write_rated_capacity(di, rated_capacity); + retval = power_supply_register(&pdev->dev, &di->bat); if (retval) { dev_err(di->dev, "failed to register battery\n"); From 25f2bfa62ae77820a8185734c4a2ab7f3971a2fc Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 15 Jul 2009 18:20:41 +0200 Subject: [PATCH 08/18] ds2760_battery: handle full_active_uAh == 0 case correctly In systems where the battery monitor is not part of the battery pack and is hence not bootstrapped with sane values, the full_active_uAh is likely to be zero. Handle that case by defaulting to the rated_capacity information which can be passed to the driver using the new module parameter. Signed-off-by: Daniel Mack Cc: Szabolcs Gyurko Acked-by: Matt Reimer Signed-off-by: Anton Vorontsov --- drivers/power/ds2760_battery.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index ed0ea5e275c5..2d0e5edb4742 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -172,8 +172,13 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di) di->full_active_uAh = di->raw[DS2760_ACTIVE_FULL] << 8 | di->raw[DS2760_ACTIVE_FULL + 1]; - scale[0] = di->raw[DS2760_ACTIVE_FULL] << 8 | - di->raw[DS2760_ACTIVE_FULL + 1]; + /* If the full_active_uAh value is not given, fall back to the rated + * capacity. This is likely to happen when chips are not part of the + * battery pack and is therefore not bootstrapped. */ + if (di->full_active_uAh == 0) + di->full_active_uAh = di->rated_capacity / 1000L; + + scale[0] = di->full_active_uAh; for (i = 1; i < 5; i++) scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 2 + i]; From 02d0d2758821c38b2601d34dac544140af09e651 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 15 Jul 2009 22:57:16 +0200 Subject: [PATCH 09/18] ds2760_battery: add current_accum module parameter When connecting a ds2760 to a partly loaded battery the first time, there must be a way to bootstrap the current_accum value. Without that, the current capactity value is bogus until the battery is fully charged for the first time. Signed-off-by: Daniel Mack Cc: Szabolcs Gyurko Cc: Matt Reimer Signed-off-by: Anton Vorontsov --- drivers/power/ds2760_battery.c | 41 ++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 14 deletions(-) diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index 2d0e5edb4742..f4a9258aa9d0 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -70,6 +70,10 @@ static unsigned int rated_capacity; module_param(rated_capacity, uint, 0644); MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index"); +static unsigned int current_accum; +module_param(current_accum, uint, 0644); +MODULE_PARM_DESC(current_accum, "current accumulator value"); + /* Some batteries have their rated capacity stored a N * 10 mAh, while * others use an index into this table. */ static int rated_capacities[] = { @@ -215,6 +219,22 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di) return 0; } +static void ds2760_battery_set_current_accum(struct ds2760_device_info *di, + unsigned int acr_val) +{ + unsigned char acr[2]; + + /* acr is in units of 0.25 mAh */ + acr_val *= 4L; + acr_val /= 1000; + + acr[0] = acr_val >> 8; + acr[1] = acr_val & 0xff; + + if (w1_ds2760_write(di->w1_dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2) + dev_warn(di->dev, "ACR write failed\n"); +} + static void ds2760_battery_update_status(struct ds2760_device_info *di) { int old_charge_status = di->charge_status; @@ -246,21 +266,9 @@ static void ds2760_battery_update_status(struct ds2760_device_info *di) if (di->full_counter < 2) { di->charge_status = POWER_SUPPLY_STATUS_CHARGING; } else { - unsigned char acr[2]; - int acr_val; - - /* acr is in units of 0.25 mAh */ - acr_val = di->full_active_uAh * 4L / 1000; - - acr[0] = acr_val >> 8; - acr[1] = acr_val & 0xff; - - if (w1_ds2760_write(di->w1_dev, acr, - DS2760_CURRENT_ACCUM_MSB, 2) < 2) - dev_warn(di->dev, - "ACR reset failed\n"); - di->charge_status = POWER_SUPPLY_STATUS_FULL; + ds2760_battery_set_current_accum(di, + di->full_active_uAh); } } } else { @@ -423,6 +431,11 @@ static int ds2760_battery_probe(struct platform_device *pdev) if (rated_capacity) ds2760_battery_write_rated_capacity(di, rated_capacity); + /* set current accumulator if given as parameter. + * this should only be done for bootstrapping the value */ + if (current_accum) + ds2760_battery_set_current_accum(di, current_accum); + retval = power_supply_register(&pdev->dev, &di->bat); if (retval) { dev_err(di->dev, "failed to register battery\n"); From ff3417e7effe57cc002a8882a48bcb8e1a7e7267 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 30 Jul 2009 17:42:31 +0400 Subject: [PATCH 10/18] power_supply: EXPORT_SYMBOL cleanups While I'm at it, cleanup the power supply code so that EXPORT_SYMBOL_GPL appears directly after the symbole declaration. checkpatch.pl wants it that way. Signed-off-by: Daniel Mack Cc: Ian Molton Cc: Matt Reimer Signed-off-by: Anton Vorontsov --- drivers/power/power_supply_core.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c index 5520040449c4..12cd6e36ff1d 100644 --- a/drivers/power/power_supply_core.c +++ b/drivers/power/power_supply_core.c @@ -18,7 +18,9 @@ #include #include "power_supply.h" +/* exported for the APM Power driver, APM emulation */ struct class *power_supply_class; +EXPORT_SYMBOL_GPL(power_supply_class); static int __power_supply_changed_work(struct device *dev, void *data) { @@ -55,6 +57,7 @@ void power_supply_changed(struct power_supply *psy) schedule_work(&psy->changed_work); } +EXPORT_SYMBOL_GPL(power_supply_changed); static int __power_supply_am_i_supplied(struct device *dev, void *data) { @@ -86,6 +89,7 @@ int power_supply_am_i_supplied(struct power_supply *psy) return error; } +EXPORT_SYMBOL_GPL(power_supply_am_i_supplied); static int __power_supply_is_system_supplied(struct device *dev, void *data) { @@ -110,6 +114,7 @@ int power_supply_is_system_supplied(void) return error; } +EXPORT_SYMBOL_GPL(power_supply_is_system_supplied); int power_supply_register(struct device *parent, struct power_supply *psy) { @@ -144,6 +149,7 @@ dev_create_failed: success: return rc; } +EXPORT_SYMBOL_GPL(power_supply_register); void power_supply_unregister(struct power_supply *psy) { @@ -152,6 +158,7 @@ void power_supply_unregister(struct power_supply *psy) power_supply_remove_attrs(psy); device_unregister(psy->dev); } +EXPORT_SYMBOL_GPL(power_supply_unregister); static int __init power_supply_class_init(void) { @@ -170,15 +177,6 @@ static void __exit power_supply_class_exit(void) class_destroy(power_supply_class); } -EXPORT_SYMBOL_GPL(power_supply_changed); -EXPORT_SYMBOL_GPL(power_supply_am_i_supplied); -EXPORT_SYMBOL_GPL(power_supply_is_system_supplied); -EXPORT_SYMBOL_GPL(power_supply_register); -EXPORT_SYMBOL_GPL(power_supply_unregister); - -/* exported for the APM Power driver, APM emulation */ -EXPORT_SYMBOL_GPL(power_supply_class); - subsys_initcall(power_supply_class_init); module_exit(power_supply_class_exit); From e5f5ccb646bc6009572b5c23201b5e81638ff150 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 23 Jul 2009 20:35:53 +0200 Subject: [PATCH 11/18] power_supply: get_by_name and set_charged functionality This adds a function that indicates that a battery is fully charged. It also includes functions to get a power_supply device from the class of registered devices by name reference. These can be used to find a specific battery to call power_supply_set_battery_charged() on. Some battery drivers might need this information to calibrate themselves. Signed-off-by: Daniel Mack Cc: Ian Molton Cc: Anton Vorontsov Cc: Matt Reimer Signed-off-by: Anton Vorontsov --- drivers/power/power_supply_core.c | 28 ++++++++++++++++++++++++++++ include/linux/power_supply.h | 3 +++ 2 files changed, 31 insertions(+) diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c index 12cd6e36ff1d..cce75b40b435 100644 --- a/drivers/power/power_supply_core.c +++ b/drivers/power/power_supply_core.c @@ -116,6 +116,34 @@ int power_supply_is_system_supplied(void) } EXPORT_SYMBOL_GPL(power_supply_is_system_supplied); +int power_supply_set_battery_charged(struct power_supply *psy) +{ + if (psy->type == POWER_SUPPLY_TYPE_BATTERY && psy->set_charged) { + psy->set_charged(psy); + return 0; + } + + return -EINVAL; +} +EXPORT_SYMBOL_GPL(power_supply_set_battery_charged); + +static int power_supply_match_device_by_name(struct device *dev, void *data) +{ + const char *name = data; + struct power_supply *psy = dev_get_drvdata(dev); + + return strcmp(psy->name, name) == 0; +} + +struct power_supply *power_supply_get_by_name(char *name) +{ + struct device *dev = class_find_device(power_supply_class, NULL, name, + power_supply_match_device_by_name); + + return dev ? dev_get_drvdata(dev) : NULL; +} +EXPORT_SYMBOL_GPL(power_supply_get_by_name); + int power_supply_register(struct device *parent, struct power_supply *psy) { int rc = 0; diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 4c7c6fc35487..b5d096d3a9be 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -144,6 +144,7 @@ struct power_supply { enum power_supply_property psp, union power_supply_propval *val); void (*external_power_changed)(struct power_supply *psy); + void (*set_charged)(struct power_supply *psy); /* For APM emulation, think legacy userspace. */ int use_for_apm; @@ -183,8 +184,10 @@ struct power_supply_info { int use_for_apm; }; +extern struct power_supply *power_supply_get_by_name(char *name); extern void power_supply_changed(struct power_supply *psy); extern int power_supply_am_i_supplied(struct power_supply *psy); +extern int power_supply_set_battery_charged(struct power_supply *psy); #if defined(CONFIG_POWER_SUPPLY) || defined(CONFIG_POWER_SUPPLY_MODULE) extern int power_supply_is_system_supplied(void); From 8d631ccff8d90fce77b42f01b3872595c599cbf9 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 23 Jul 2009 20:35:54 +0200 Subject: [PATCH 12/18] ds2760_battery: implement set_charged() feature The ds2760's internal current meter is not reliable enough as it has an inacurracy of around ~15%. Without any correction for that error, the current accumulator is couting up all the time, even though the battery is already fully charged and hence destroys the static information. The longer it is connected, the worse is the aberration. Fortunately, this can be corrected by the DS2760_CURRENT_OFFSET_BIAS register. Using the external power_supply_set_battery_charged() function, this register is now gauging the measurement. A delayed work is used to debounce flaky GPIO signals and to let the current value settle. Also see Maxim's application note AN4188. Signed-off-by: Daniel Mack Cc: Szabolcs Gyurko Cc: Matt Reimer Cc: Anton Vorontsov Signed-off-by: Anton Vorontsov --- drivers/power/ds2760_battery.c | 52 ++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index f4a9258aa9d0..1bb8498f14be 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -56,6 +56,7 @@ struct ds2760_device_info { struct device *w1_dev; struct workqueue_struct *monitor_wqueue; struct delayed_work monitor_work; + struct delayed_work set_charged_work; }; static unsigned int cache_time = 1000; @@ -327,6 +328,52 @@ static void ds2760_battery_external_power_changed(struct power_supply *psy) queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ/10); } + +static void ds2760_battery_set_charged_work(struct work_struct *work) +{ + char bias; + struct ds2760_device_info *di = container_of(work, + struct ds2760_device_info, set_charged_work.work); + + dev_dbg(di->dev, "%s\n", __func__); + + ds2760_battery_read_status(di); + + /* When we get notified by external circuitry that the battery is + * considered fully charged now, we know that there is no current + * flow any more. However, the ds2760's internal current meter is + * too inaccurate to rely on - spec say something ~15% failure. + * Hence, we use the current offset bias register to compensate + * that error. + */ + + if (!power_supply_am_i_supplied(&di->bat)) + return; + + bias = (signed char) di->current_raw + + (signed char) di->raw[DS2760_CURRENT_OFFSET_BIAS]; + + dev_dbg(di->dev, "%s: bias = %d\n", __func__, bias); + + w1_ds2760_write(di->w1_dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1); + w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1); + w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1); + + /* Write to the di->raw[] buffer directly - the CURRENT_OFFSET_BIAS + * value won't be read back by ds2760_battery_read_status() */ + di->raw[DS2760_CURRENT_OFFSET_BIAS] = bias; +} + +static void ds2760_battery_set_charged(struct power_supply *psy) +{ + struct ds2760_device_info *di = to_ds2760_device_info(psy); + + /* postpone the actual work by 20 secs. This is for debouncing GPIO + * signals and to let the current value settle. See AN4188. */ + cancel_delayed_work(&di->set_charged_work); + queue_delayed_work(di->monitor_wqueue, &di->set_charged_work, HZ * 20); +} + static int ds2760_battery_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -412,6 +459,7 @@ static int ds2760_battery_probe(struct platform_device *pdev) di->bat.properties = ds2760_battery_props; di->bat.num_properties = ARRAY_SIZE(ds2760_battery_props); di->bat.get_property = ds2760_battery_get_property; + di->bat.set_charged = ds2760_battery_set_charged; di->bat.external_power_changed = ds2760_battery_external_power_changed; @@ -443,6 +491,8 @@ static int ds2760_battery_probe(struct platform_device *pdev) } INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work); + INIT_DELAYED_WORK(&di->set_charged_work, + ds2760_battery_set_charged_work); di->monitor_wqueue = create_singlethread_workqueue(dev_name(&pdev->dev)); if (!di->monitor_wqueue) { retval = -ESRCH; @@ -467,6 +517,8 @@ static int ds2760_battery_remove(struct platform_device *pdev) cancel_rearming_delayed_workqueue(di->monitor_wqueue, &di->monitor_work); + cancel_rearming_delayed_workqueue(di->monitor_wqueue, + &di->set_charged_work); destroy_workqueue(di->monitor_wqueue); power_supply_unregister(&di->bat); From 32bb0e0c778a4a6cd4534a5b98f08cd45e9ab5b9 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 23 Jul 2009 15:50:43 +0200 Subject: [PATCH 13/18] wm97xx-core: Pass platform_data to battery Signed-off-by: Marek Vasut Acked-by: Dmitry Torokhov Signed-off-by: Anton Vorontsov --- drivers/input/touchscreen/wm97xx-core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index 2957d48e0045..cf8cbc60d5ce 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -561,6 +561,7 @@ static void wm97xx_ts_input_close(struct input_dev *idev) static int wm97xx_probe(struct device *dev) { struct wm97xx *wm; + struct wm97xx_pdata *pdata = dev->platform_data; int ret = 0, id = 0; wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL); @@ -656,6 +657,7 @@ static int wm97xx_probe(struct device *dev) } platform_set_drvdata(wm->battery_dev, wm); wm->battery_dev->dev.parent = dev; + wm->battery_dev->dev.platform_data = pdata; ret = platform_device_add(wm->battery_dev); if (ret < 0) goto batt_reg_err; @@ -669,6 +671,7 @@ static int wm97xx_probe(struct device *dev) } platform_set_drvdata(wm->touch_dev, wm); wm->touch_dev->dev.parent = dev; + wm->touch_dev->dev.platform_data = pdata; ret = platform_device_add(wm->touch_dev); if (ret < 0) goto touch_reg_err; From b8bdc1d0cfc488ac0d94724639f9a61b0a5a1d40 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 31 Aug 2009 06:20:12 +0200 Subject: [PATCH 14/18] wm97xx_battery: Use platform_data This patch converts the wm97xx-battery driver to use platform_data supplied by ac97 bus. Signed-off-by: Marek Vasut Signed-off-by: Anton Vorontsov --- drivers/power/wm97xx_battery.c | 32 +++++++++++++++++++++++++++----- include/linux/wm97xx.h | 18 ++++++++++++++++++ include/linux/wm97xx_batt.h | 18 ++++-------------- 3 files changed, 49 insertions(+), 19 deletions(-) diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c index 8bde92126d34..14ebd960ebe5 100644 --- a/drivers/power/wm97xx_battery.c +++ b/drivers/power/wm97xx_battery.c @@ -22,17 +22,19 @@ #include #include #include -#include static DEFINE_MUTEX(bat_lock); static struct work_struct bat_work; struct mutex work_lock; static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN; -static struct wm97xx_batt_info *pdata; +static struct wm97xx_batt_info *gpdata; static enum power_supply_property *prop; static unsigned long wm97xx_read_bat(struct power_supply *bat_ps) { + struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; + struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; + return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data, pdata->batt_aux) * pdata->batt_mult / pdata->batt_div; @@ -40,6 +42,9 @@ static unsigned long wm97xx_read_bat(struct power_supply *bat_ps) static unsigned long wm97xx_read_temp(struct power_supply *bat_ps) { + struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; + struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; + return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data, pdata->temp_aux) * pdata->temp_mult / pdata->temp_div; @@ -49,6 +54,9 @@ static int wm97xx_bat_get_property(struct power_supply *bat_ps, enum power_supply_property psp, union power_supply_propval *val) { + struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; + struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; + switch (psp) { case POWER_SUPPLY_PROP_STATUS: val->intval = bat_status; @@ -97,6 +105,8 @@ static void wm97xx_bat_external_power_changed(struct power_supply *bat_ps) static void wm97xx_bat_update(struct power_supply *bat_ps) { int old_status = bat_status; + struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; + struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; mutex_lock(&work_lock); @@ -149,6 +159,15 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev) int ret = 0; int props = 1; /* POWER_SUPPLY_PROP_PRESENT */ int i = 0; + struct wm97xx_pdata *wmdata = dev->dev.platform_data; + struct wm97xx_batt_pdata *pdata; + + if (gpdata) { + dev_err(&dev->dev, "Do not pass platform_data through " + "wm97xx_bat_set_pdata!\n"); + return -EINVAL; + } else + pdata = wmdata->batt_pdata; if (dev->id != -1) return -EINVAL; @@ -156,7 +175,7 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev) mutex_init(&work_lock); if (!pdata) { - dev_err(&dev->dev, "Please use wm97xx_bat_set_pdata\n"); + dev_err(&dev->dev, "No platform_data supplied\n"); return -EINVAL; } @@ -229,6 +248,9 @@ err: static int __devexit wm97xx_bat_remove(struct platform_device *dev) { + struct wm97xx_pdata *wmdata = dev->dev.platform_data; + struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; + if (pdata && pdata->charge_gpio && pdata->charge_gpio >= 0) gpio_free(pdata->charge_gpio); flush_scheduled_work(); @@ -258,9 +280,9 @@ static void __exit wm97xx_bat_exit(void) platform_driver_unregister(&wm97xx_bat_driver); } -void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) +void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) { - pdata = data; + gpdata = data; } EXPORT_SYMBOL_GPL(wm97xx_bat_set_pdata); diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h index 6f69968eab24..b2c2297844e3 100644 --- a/include/linux/wm97xx.h +++ b/include/linux/wm97xx.h @@ -286,6 +286,24 @@ struct wm97xx { u16 suspend_mode; /* PRP in suspend mode */ }; +struct wm97xx_batt_pdata { + int batt_aux; + int temp_aux; + int charge_gpio; + int min_voltage; + int max_voltage; + int batt_div; + int batt_mult; + int temp_div; + int temp_mult; + int batt_tech; + char *batt_name; +}; + +struct wm97xx_pdata { + struct wm97xx_batt_pdata *batt_pdata; /* battery data */ +}; + /* * Codec GPIO access (not supported on WM9705) * This can be used to set/get codec GPIO and Virtual GPIO status. diff --git a/include/linux/wm97xx_batt.h b/include/linux/wm97xx_batt.h index 9681d1ab0e4f..a1d6419c2ff8 100644 --- a/include/linux/wm97xx_batt.h +++ b/include/linux/wm97xx_batt.h @@ -3,22 +3,12 @@ #include -struct wm97xx_batt_info { - int batt_aux; - int temp_aux; - int charge_gpio; - int min_voltage; - int max_voltage; - int batt_div; - int batt_mult; - int temp_div; - int temp_mult; - int batt_tech; - char *batt_name; -}; +#warning This file will be removed soon, use wm97xx.h instead! + +#define wm97xx_batt_info wm97xx_batt_pdata #ifdef CONFIG_BATTERY_WM97XX -void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data); +void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data); #else static inline void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) {} #endif From 7c87942aef52d2120e95ff1dec739998b9f95a78 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 23 Jul 2009 16:02:08 +0200 Subject: [PATCH 15/18] wm97xx_battery: Use irq to detect charger state Signed-off-by: Marek Vasut Signed-off-by: Anton Vorontsov --- drivers/power/wm97xx_battery.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c index 14ebd960ebe5..cad1ba283bfd 100644 --- a/drivers/power/wm97xx_battery.c +++ b/drivers/power/wm97xx_battery.c @@ -22,6 +22,7 @@ #include #include #include +#include static DEFINE_MUTEX(bat_lock); static struct work_struct bat_work; @@ -137,6 +138,12 @@ static void wm97xx_bat_work(struct work_struct *work) wm97xx_bat_update(&bat_ps); } +static irqreturn_t wm97xx_chrg_irq(int irq, void *data) +{ + schedule_work(&bat_work); + return IRQ_HANDLED; +} + #ifdef CONFIG_PM static int wm97xx_bat_suspend(struct platform_device *dev, pm_message_t state) { @@ -179,11 +186,16 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev) return -EINVAL; } - if (pdata->charge_gpio >= 0 && gpio_is_valid(pdata->charge_gpio)) { + if (gpio_is_valid(pdata->charge_gpio)) { ret = gpio_request(pdata->charge_gpio, "BATT CHRG"); if (ret) goto err; ret = gpio_direction_input(pdata->charge_gpio); + if (ret) + goto err2; + ret = request_irq(gpio_to_irq(pdata->charge_gpio), + wm97xx_chrg_irq, IRQF_DISABLED, + "AC Detect", 0); if (ret) goto err2; props++; /* POWER_SUPPLY_PROP_STATUS */ @@ -202,7 +214,7 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev) prop = kzalloc(props * sizeof(*prop), GFP_KERNEL); if (!prop) - goto err2; + goto err3; prop[i++] = POWER_SUPPLY_PROP_PRESENT; if (pdata->charge_gpio >= 0) @@ -235,13 +247,17 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev) if (!ret) schedule_work(&bat_work); else - goto err3; + goto err4; return 0; -err3: +err4: kfree(prop); +err3: + if (gpio_is_valid(pdata->charge_gpio)) + free_irq(gpio_to_irq(pdata->charge_gpio), dev); err2: - gpio_free(pdata->charge_gpio); + if (gpio_is_valid(pdata->charge_gpio)) + gpio_free(pdata->charge_gpio); err: return ret; } @@ -251,8 +267,10 @@ static int __devexit wm97xx_bat_remove(struct platform_device *dev) struct wm97xx_pdata *wmdata = dev->dev.platform_data; struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; - if (pdata && pdata->charge_gpio && pdata->charge_gpio >= 0) + if (pdata && gpio_is_valid(pdata->charge_gpio)) { + free_irq(gpio_to_irq(pdata->charge_gpio), dev); gpio_free(pdata->charge_gpio); + } flush_scheduled_work(); power_supply_unregister(&bat_ps); kfree(prop); From 83a8af0d31cfa6c728a68c00f6b1b518e2dcc03d Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 22 Aug 2009 00:36:43 +0200 Subject: [PATCH 16/18] wm97xx_battery: Convert to dev_pm_ops Signed-off-by: Marek Vasut Signed-off-by: Anton Vorontsov --- drivers/power/wm97xx_battery.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c index cad1ba283bfd..c552082c8128 100644 --- a/drivers/power/wm97xx_battery.c +++ b/drivers/power/wm97xx_battery.c @@ -145,20 +145,22 @@ static irqreturn_t wm97xx_chrg_irq(int irq, void *data) } #ifdef CONFIG_PM -static int wm97xx_bat_suspend(struct platform_device *dev, pm_message_t state) +static int wm97xx_bat_suspend(struct device *dev) { flush_scheduled_work(); return 0; } -static int wm97xx_bat_resume(struct platform_device *dev) +static int wm97xx_bat_resume(struct device *dev) { schedule_work(&bat_work); return 0; } -#else -#define wm97xx_bat_suspend NULL -#define wm97xx_bat_resume NULL + +static struct dev_pm_ops wm97xx_bat_pm_ops = { + .suspend = wm97xx_bat_suspend, + .resume = wm97xx_bat_resume, +}; #endif static int __devinit wm97xx_bat_probe(struct platform_device *dev) @@ -281,11 +283,12 @@ static struct platform_driver wm97xx_bat_driver = { .driver = { .name = "wm97xx-battery", .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &wm97xx_bat_pm_ops, +#endif }, .probe = wm97xx_bat_probe, .remove = __devexit_p(wm97xx_bat_remove), - .suspend = wm97xx_bat_suspend, - .resume = wm97xx_bat_resume, }; static int __init wm97xx_bat_init(void) From b0525b48f06714e8d5cf6a3266261b71de8d6dd4 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Fri, 24 Jul 2009 15:08:11 +0200 Subject: [PATCH 17/18] ds2760_battery: Fix integer overflow for time_to_empty_now On the device we're currently developing, battery sizes of ~2.8Ah and current flow of ~600mA are typical. With that values, the life_sec computation overflows due to the multiplication by 3600. Signed-off-by: Daniel Mack Cc: Szabolcs Gyurko Cc: Matt Reimer Signed-off-by: Anton Vorontsov --- drivers/power/ds2760_battery.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index 1bb8498f14be..6f1dba5a519d 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -211,9 +211,9 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di) if (di->rem_capacity > 100) di->rem_capacity = 100; - if (di->current_uA) - di->life_sec = -((di->accum_current_uAh - di->empty_uAh) * - 3600L) / di->current_uA; + if (di->current_uA >= 100L) + di->life_sec = -((di->accum_current_uAh - di->empty_uAh) * 36L) + / (di->current_uA / 100L); else di->life_sec = 0; From 3961f7c3cf247eee5df7fabadc7a40f2deeb98f3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 10 Aug 2009 17:43:53 +0100 Subject: [PATCH 18/18] power_supply: Add driver for the PMU on WM831x PMICs The WM831x PMICs provide power path management from three sources: a wall supply, USB and a battery with integrated charger. They also provide an additional backup supply with integrated for maintaining always on functionality such as the RTC and monitoring of power switches. After some initial configuration at startup the device operates autonomously, the driver simply provides reporting of the current state. Signed-off-by: Mark Brown Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 7 + drivers/power/Makefile | 1 + drivers/power/wm831x_power.c | 779 +++++++++++++++++++++++++++++++++ include/linux/mfd/wm831x/pmu.h | 189 ++++++++ 4 files changed, 976 insertions(+) create mode 100644 drivers/power/wm831x_power.c create mode 100644 include/linux/mfd/wm831x/pmu.h diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index bdbc4f73fcdc..cea6cef27e89 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -29,6 +29,13 @@ config APM_POWER Say Y here to enable support APM status emulation using battery class devices. +config WM831X_POWER + tristate "WM831X PMU support" + depends on MFD_WM831X + help + Say Y here to enable support for the power management unit + provided by Wolfson Microelectronics WM831x PMICs. + config WM8350_POWER tristate "WM8350 PMU support" depends on MFD_WM8350 diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 380d17c9ae29..b96f29d91c28 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_POWER_SUPPLY) += power_supply.o obj-$(CONFIG_PDA_POWER) += pda_power.o obj-$(CONFIG_APM_POWER) += apm_power.o +obj-$(CONFIG_WM831X_POWER) += wm831x_power.o obj-$(CONFIG_WM8350_POWER) += wm8350_power.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c new file mode 100644 index 000000000000..2a4c8b0b829c --- /dev/null +++ b/drivers/power/wm831x_power.c @@ -0,0 +1,779 @@ +/* + * PMU driver for Wolfson Microelectronics wm831x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +struct wm831x_power { + struct wm831x *wm831x; + struct power_supply wall; + struct power_supply backup; + struct power_supply usb; + struct power_supply battery; +}; + +static int wm831x_power_check_online(struct wm831x *wm831x, int supply, + union power_supply_propval *val) +{ + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS); + if (ret < 0) + return ret; + + if (ret & supply) + val->intval = 1; + else + val->intval = 0; + + return 0; +} + +static int wm831x_power_read_voltage(struct wm831x *wm831x, + enum wm831x_auxadc src, + union power_supply_propval *val) +{ + int ret; + + ret = wm831x_auxadc_read_uv(wm831x, src); + if (ret >= 0) + val->intval = ret; + + return ret; +} + +/********************************************************************* + * WALL Power + *********************************************************************/ +static int wm831x_wall_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent); + struct wm831x *wm831x = wm831x_power->wm831x; + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + ret = wm831x_power_check_online(wm831x, WM831X_PWR_WALL, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_WALL, val); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static enum power_supply_property wm831x_wall_props[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, +}; + +/********************************************************************* + * USB Power + *********************************************************************/ +static int wm831x_usb_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent); + struct wm831x *wm831x = wm831x_power->wm831x; + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + ret = wm831x_power_check_online(wm831x, WM831X_PWR_USB, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_USB, val); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static enum power_supply_property wm831x_usb_props[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, +}; + +/********************************************************************* + * Battery properties + *********************************************************************/ + +struct chg_map { + int val; + int reg_val; +}; + +static struct chg_map trickle_ilims[] = { + { 50, 0 << WM831X_CHG_TRKL_ILIM_SHIFT }, + { 100, 1 << WM831X_CHG_TRKL_ILIM_SHIFT }, + { 150, 2 << WM831X_CHG_TRKL_ILIM_SHIFT }, + { 200, 3 << WM831X_CHG_TRKL_ILIM_SHIFT }, +}; + +static struct chg_map vsels[] = { + { 4050, 0 << WM831X_CHG_VSEL_SHIFT }, + { 4100, 1 << WM831X_CHG_VSEL_SHIFT }, + { 4150, 2 << WM831X_CHG_VSEL_SHIFT }, + { 4200, 3 << WM831X_CHG_VSEL_SHIFT }, +}; + +static struct chg_map fast_ilims[] = { + { 0, 0 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 50, 1 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 100, 2 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 150, 3 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 200, 4 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 250, 5 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 300, 6 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 350, 7 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 400, 8 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 450, 9 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 500, 10 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 600, 11 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 700, 12 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 800, 13 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 900, 14 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 1000, 15 << WM831X_CHG_FAST_ILIM_SHIFT }, +}; + +static struct chg_map eoc_iterms[] = { + { 20, 0 << WM831X_CHG_ITERM_SHIFT }, + { 30, 1 << WM831X_CHG_ITERM_SHIFT }, + { 40, 2 << WM831X_CHG_ITERM_SHIFT }, + { 50, 3 << WM831X_CHG_ITERM_SHIFT }, + { 60, 4 << WM831X_CHG_ITERM_SHIFT }, + { 70, 5 << WM831X_CHG_ITERM_SHIFT }, + { 80, 6 << WM831X_CHG_ITERM_SHIFT }, + { 90, 7 << WM831X_CHG_ITERM_SHIFT }, +}; + +static struct chg_map chg_times[] = { + { 60, 0 << WM831X_CHG_TIME_SHIFT }, + { 90, 1 << WM831X_CHG_TIME_SHIFT }, + { 120, 2 << WM831X_CHG_TIME_SHIFT }, + { 150, 3 << WM831X_CHG_TIME_SHIFT }, + { 180, 4 << WM831X_CHG_TIME_SHIFT }, + { 210, 5 << WM831X_CHG_TIME_SHIFT }, + { 240, 6 << WM831X_CHG_TIME_SHIFT }, + { 270, 7 << WM831X_CHG_TIME_SHIFT }, + { 300, 8 << WM831X_CHG_TIME_SHIFT }, + { 330, 9 << WM831X_CHG_TIME_SHIFT }, + { 360, 10 << WM831X_CHG_TIME_SHIFT }, + { 390, 11 << WM831X_CHG_TIME_SHIFT }, + { 420, 12 << WM831X_CHG_TIME_SHIFT }, + { 450, 13 << WM831X_CHG_TIME_SHIFT }, + { 480, 14 << WM831X_CHG_TIME_SHIFT }, + { 510, 15 << WM831X_CHG_TIME_SHIFT }, +}; + +static void wm831x_battey_apply_config(struct wm831x *wm831x, + struct chg_map *map, int count, int val, + int *reg, const char *name, + const char *units) +{ + int i; + + for (i = 0; i < count; i++) + if (val == map[i].val) + break; + if (i == count) { + dev_err(wm831x->dev, "Invalid %s %d%s\n", + name, val, units); + } else { + *reg |= map[i].reg_val; + dev_dbg(wm831x->dev, "Set %s of %d%s\n", name, val, units); + } +} + +static void wm831x_config_battery(struct wm831x *wm831x) +{ + struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data; + struct wm831x_battery_pdata *pdata; + int ret, reg1, reg2; + + if (!wm831x_pdata || !wm831x_pdata->battery) { + dev_warn(wm831x->dev, + "No battery charger configuration\n"); + return; + } + + pdata = wm831x_pdata->battery; + + reg1 = 0; + reg2 = 0; + + if (!pdata->enable) { + dev_info(wm831x->dev, "Battery charger disabled\n"); + return; + } + + reg1 |= WM831X_CHG_ENA; + if (pdata->off_mask) + reg2 |= WM831X_CHG_OFF_MSK; + if (pdata->fast_enable) + reg1 |= WM831X_CHG_FAST; + + wm831x_battey_apply_config(wm831x, trickle_ilims, + ARRAY_SIZE(trickle_ilims), + pdata->trickle_ilim, ®2, + "trickle charge current limit", "mA"); + + wm831x_battey_apply_config(wm831x, vsels, ARRAY_SIZE(vsels), + pdata->vsel, ®2, + "target voltage", "mV"); + + wm831x_battey_apply_config(wm831x, fast_ilims, ARRAY_SIZE(fast_ilims), + pdata->fast_ilim, ®2, + "fast charge current limit", "mA"); + + wm831x_battey_apply_config(wm831x, eoc_iterms, ARRAY_SIZE(eoc_iterms), + pdata->eoc_iterm, ®1, + "end of charge current threshold", "mA"); + + wm831x_battey_apply_config(wm831x, chg_times, ARRAY_SIZE(chg_times), + pdata->timeout, ®2, + "charger timeout", "min"); + + ret = wm831x_reg_unlock(wm831x); + if (ret != 0) { + dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret); + return; + } + + ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_1, + WM831X_CHG_ENA_MASK | + WM831X_CHG_FAST_MASK | + WM831X_CHG_ITERM_MASK | + WM831X_CHG_ITERM_MASK, + reg1); + if (ret != 0) + dev_err(wm831x->dev, "Failed to set charger control 1: %d\n", + ret); + + ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_2, + WM831X_CHG_OFF_MSK | + WM831X_CHG_TIME_MASK | + WM831X_CHG_FAST_ILIM_MASK | + WM831X_CHG_TRKL_ILIM_MASK | + WM831X_CHG_VSEL_MASK, + reg2); + if (ret != 0) + dev_err(wm831x->dev, "Failed to set charger control 2: %d\n", + ret); + + wm831x_reg_lock(wm831x); +} + +static int wm831x_bat_check_status(struct wm831x *wm831x, int *status) +{ + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS); + if (ret < 0) + return ret; + + if (ret & WM831X_PWR_SRC_BATT) { + *status = POWER_SUPPLY_STATUS_DISCHARGING; + return 0; + } + + ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS); + if (ret < 0) + return ret; + + switch (ret & WM831X_CHG_STATE_MASK) { + case WM831X_CHG_STATE_OFF: + *status = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + case WM831X_CHG_STATE_TRICKLE: + case WM831X_CHG_STATE_FAST: + *status = POWER_SUPPLY_STATUS_CHARGING; + break; + + default: + *status = POWER_SUPPLY_STATUS_UNKNOWN; + break; + } + + return 0; +} + +static int wm831x_bat_check_type(struct wm831x *wm831x, int *type) +{ + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS); + if (ret < 0) + return ret; + + switch (ret & WM831X_CHG_STATE_MASK) { + case WM831X_CHG_STATE_TRICKLE: + case WM831X_CHG_STATE_TRICKLE_OT: + *type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + break; + case WM831X_CHG_STATE_FAST: + case WM831X_CHG_STATE_FAST_OT: + *type = POWER_SUPPLY_CHARGE_TYPE_FAST; + break; + default: + *type = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; + } + + return 0; +} + +static int wm831x_bat_check_health(struct wm831x *wm831x, int *health) +{ + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS); + if (ret < 0) + return ret; + + if (ret & WM831X_BATT_HOT_STS) { + *health = POWER_SUPPLY_HEALTH_OVERHEAT; + return 0; + } + + if (ret & WM831X_BATT_COLD_STS) { + *health = POWER_SUPPLY_HEALTH_COLD; + return 0; + } + + if (ret & WM831X_BATT_OV_STS) { + *health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + return 0; + } + + switch (ret & WM831X_CHG_STATE_MASK) { + case WM831X_CHG_STATE_TRICKLE_OT: + case WM831X_CHG_STATE_FAST_OT: + *health = POWER_SUPPLY_HEALTH_OVERHEAT; + break; + case WM831X_CHG_STATE_DEFECTIVE: + *health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + break; + default: + *health = POWER_SUPPLY_HEALTH_GOOD; + break; + } + + return 0; +} + +static int wm831x_bat_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent); + struct wm831x *wm831x = wm831x_power->wm831x; + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + ret = wm831x_bat_check_status(wm831x, &val->intval); + break; + case POWER_SUPPLY_PROP_ONLINE: + ret = wm831x_power_check_online(wm831x, WM831X_PWR_SRC_BATT, + val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BATT, val); + break; + case POWER_SUPPLY_PROP_HEALTH: + ret = wm831x_bat_check_health(wm831x, &val->intval); + break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + ret = wm831x_bat_check_type(wm831x, &val->intval); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static enum power_supply_property wm831x_bat_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_CHARGE_TYPE, +}; + +static const char *wm831x_bat_irqs[] = { + "BATT HOT", + "BATT COLD", + "BATT FAIL", + "OV", + "END", + "TO", + "MODE", + "START", +}; + +static irqreturn_t wm831x_bat_irq(int irq, void *data) +{ + struct wm831x_power *wm831x_power = data; + struct wm831x *wm831x = wm831x_power->wm831x; + + dev_dbg(wm831x->dev, "Battery status changed: %d\n", irq); + + /* The battery charger is autonomous so we don't need to do + * anything except kick user space */ + power_supply_changed(&wm831x_power->battery); + + return IRQ_HANDLED; +} + + +/********************************************************************* + * Backup supply properties + *********************************************************************/ + +static void wm831x_config_backup(struct wm831x *wm831x) +{ + struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data; + struct wm831x_backup_pdata *pdata; + int ret, reg; + + if (!wm831x_pdata || !wm831x_pdata->backup) { + dev_warn(wm831x->dev, + "No backup battery charger configuration\n"); + return; + } + + pdata = wm831x_pdata->backup; + + reg = 0; + + if (pdata->charger_enable) + reg |= WM831X_BKUP_CHG_ENA | WM831X_BKUP_BATT_DET_ENA; + if (pdata->no_constant_voltage) + reg |= WM831X_BKUP_CHG_MODE; + + switch (pdata->vlim) { + case 2500: + break; + case 3100: + reg |= WM831X_BKUP_CHG_VLIM; + break; + default: + dev_err(wm831x->dev, "Invalid backup voltage limit %dmV\n", + pdata->vlim); + } + + switch (pdata->ilim) { + case 100: + break; + case 200: + reg |= 1; + break; + case 300: + reg |= 2; + break; + case 400: + reg |= 3; + break; + default: + dev_err(wm831x->dev, "Invalid backup current limit %duA\n", + pdata->ilim); + } + + ret = wm831x_reg_unlock(wm831x); + if (ret != 0) { + dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret); + return; + } + + ret = wm831x_set_bits(wm831x, WM831X_BACKUP_CHARGER_CONTROL, + WM831X_BKUP_CHG_ENA_MASK | + WM831X_BKUP_CHG_MODE_MASK | + WM831X_BKUP_BATT_DET_ENA_MASK | + WM831X_BKUP_CHG_VLIM_MASK | + WM831X_BKUP_CHG_ILIM_MASK, + reg); + if (ret != 0) + dev_err(wm831x->dev, + "Failed to set backup charger config: %d\n", ret); + + wm831x_reg_lock(wm831x); +} + +static int wm831x_backup_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent); + struct wm831x *wm831x = wm831x_power->wm831x; + int ret = 0; + + ret = wm831x_reg_read(wm831x, WM831X_BACKUP_CHARGER_CONTROL); + if (ret < 0) + return ret; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (ret & WM831X_BKUP_CHG_STS) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BKUP_BATT, + val); + break; + + case POWER_SUPPLY_PROP_PRESENT: + if (ret & WM831X_BKUP_CHG_STS) + val->intval = 1; + else + val->intval = 0; + break; + + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static enum power_supply_property wm831x_backup_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_PRESENT, +}; + +/********************************************************************* + * Initialisation + *********************************************************************/ + +static irqreturn_t wm831x_syslo_irq(int irq, void *data) +{ + struct wm831x_power *wm831x_power = data; + struct wm831x *wm831x = wm831x_power->wm831x; + + /* Not much we can actually *do* but tell people for + * posterity, we're probably about to run out of power. */ + dev_crit(wm831x->dev, "SYSVDD under voltage\n"); + + return IRQ_HANDLED; +} + +static irqreturn_t wm831x_pwr_src_irq(int irq, void *data) +{ + struct wm831x_power *wm831x_power = data; + struct wm831x *wm831x = wm831x_power->wm831x; + + dev_dbg(wm831x->dev, "Power source changed\n"); + + /* Just notify for everything - little harm in overnotifying. + * The backup battery is not a power source while the system + * is running so skip that. + */ + power_supply_changed(&wm831x_power->battery); + power_supply_changed(&wm831x_power->usb); + power_supply_changed(&wm831x_power->wall); + + return IRQ_HANDLED; +} + +static __devinit int wm831x_power_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_power *power; + struct power_supply *usb; + struct power_supply *battery; + struct power_supply *wall; + struct power_supply *backup; + int ret, irq, i; + + power = kzalloc(sizeof(struct wm831x_power), GFP_KERNEL); + if (power == NULL) + return -ENOMEM; + + power->wm831x = wm831x; + platform_set_drvdata(pdev, power); + + usb = &power->usb; + battery = &power->battery; + wall = &power->wall; + backup = &power->backup; + + /* We ignore configuration failures since we can still read back + * the status without enabling either of the chargers. + */ + wm831x_config_battery(wm831x); + wm831x_config_backup(wm831x); + + wall->name = "wm831x-wall"; + wall->type = POWER_SUPPLY_TYPE_MAINS; + wall->properties = wm831x_wall_props; + wall->num_properties = ARRAY_SIZE(wm831x_wall_props); + wall->get_property = wm831x_wall_get_prop; + ret = power_supply_register(&pdev->dev, wall); + if (ret) + goto err_kmalloc; + + battery->name = "wm831x-battery"; + battery->properties = wm831x_bat_props; + battery->num_properties = ARRAY_SIZE(wm831x_bat_props); + battery->get_property = wm831x_bat_get_prop; + battery->use_for_apm = 1; + ret = power_supply_register(&pdev->dev, battery); + if (ret) + goto err_wall; + + usb->name = "wm831x-usb", + usb->type = POWER_SUPPLY_TYPE_USB; + usb->properties = wm831x_usb_props; + usb->num_properties = ARRAY_SIZE(wm831x_usb_props); + usb->get_property = wm831x_usb_get_prop; + ret = power_supply_register(&pdev->dev, usb); + if (ret) + goto err_battery; + + backup->name = "wm831x-backup"; + backup->type = POWER_SUPPLY_TYPE_BATTERY; + backup->properties = wm831x_backup_props; + backup->num_properties = ARRAY_SIZE(wm831x_backup_props); + backup->get_property = wm831x_backup_get_prop; + ret = power_supply_register(&pdev->dev, backup); + if (ret) + goto err_usb; + + irq = platform_get_irq_byname(pdev, "SYSLO"); + ret = wm831x_request_irq(wm831x, irq, wm831x_syslo_irq, + IRQF_TRIGGER_RISING, "SYSLO", + power); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n", + irq, ret); + goto err_backup; + } + + irq = platform_get_irq_byname(pdev, "PWR SRC"); + ret = wm831x_request_irq(wm831x, irq, wm831x_pwr_src_irq, + IRQF_TRIGGER_RISING, "Power source", + power); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request PWR SRC IRQ %d: %d\n", + irq, ret); + goto err_syslo; + } + + for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) { + irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]); + ret = wm831x_request_irq(wm831x, irq, wm831x_bat_irq, + IRQF_TRIGGER_RISING, + wm831x_bat_irqs[i], + power); + if (ret != 0) { + dev_err(&pdev->dev, + "Failed to request %s IRQ %d: %d\n", + wm831x_bat_irqs[i], irq, ret); + goto err_bat_irq; + } + } + + return ret; + +err_bat_irq: + for (; i >= 0; i--) { + irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]); + wm831x_free_irq(wm831x, irq, power); + } + irq = platform_get_irq_byname(pdev, "PWR SRC"); + wm831x_free_irq(wm831x, irq, power); +err_syslo: + irq = platform_get_irq_byname(pdev, "SYSLO"); + wm831x_free_irq(wm831x, irq, power); +err_backup: + power_supply_unregister(backup); +err_usb: + power_supply_unregister(usb); +err_battery: + power_supply_unregister(battery); +err_wall: + power_supply_unregister(wall); +err_kmalloc: + kfree(power); + return ret; +} + +static __devexit int wm831x_power_remove(struct platform_device *pdev) +{ + struct wm831x_power *wm831x_power = platform_get_drvdata(pdev); + struct wm831x *wm831x = wm831x_power->wm831x; + int irq, i; + + for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) { + irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]); + wm831x_free_irq(wm831x, irq, wm831x_power); + } + + irq = platform_get_irq_byname(pdev, "PWR SRC"); + wm831x_free_irq(wm831x, irq, wm831x_power); + + irq = platform_get_irq_byname(pdev, "SYSLO"); + wm831x_free_irq(wm831x, irq, wm831x_power); + + power_supply_unregister(&wm831x_power->backup); + power_supply_unregister(&wm831x_power->battery); + power_supply_unregister(&wm831x_power->wall); + power_supply_unregister(&wm831x_power->usb); + return 0; +} + +static struct platform_driver wm831x_power_driver = { + .probe = wm831x_power_probe, + .remove = __devexit_p(wm831x_power_remove), + .driver = { + .name = "wm831x-power", + }, +}; + +static int __init wm831x_power_init(void) +{ + return platform_driver_register(&wm831x_power_driver); +} +module_init(wm831x_power_init); + +static void __exit wm831x_power_exit(void) +{ + platform_driver_unregister(&wm831x_power_driver); +} +module_exit(wm831x_power_exit); + +MODULE_DESCRIPTION("Power supply driver for WM831x PMICs"); +MODULE_AUTHOR("Mark Brown "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-power"); diff --git a/include/linux/mfd/wm831x/pmu.h b/include/linux/mfd/wm831x/pmu.h new file mode 100644 index 000000000000..b18cbb027bc3 --- /dev/null +++ b/include/linux/mfd/wm831x/pmu.h @@ -0,0 +1,189 @@ +/* + * include/linux/mfd/wm831x/pmu.h -- PMU for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_PMU_H__ +#define __MFD_WM831X_PMU_H__ + +/* + * R16387 (0x4003) - Power State + */ +#define WM831X_CHIP_ON 0x8000 /* CHIP_ON */ +#define WM831X_CHIP_ON_MASK 0x8000 /* CHIP_ON */ +#define WM831X_CHIP_ON_SHIFT 15 /* CHIP_ON */ +#define WM831X_CHIP_ON_WIDTH 1 /* CHIP_ON */ +#define WM831X_CHIP_SLP 0x4000 /* CHIP_SLP */ +#define WM831X_CHIP_SLP_MASK 0x4000 /* CHIP_SLP */ +#define WM831X_CHIP_SLP_SHIFT 14 /* CHIP_SLP */ +#define WM831X_CHIP_SLP_WIDTH 1 /* CHIP_SLP */ +#define WM831X_REF_LP 0x1000 /* REF_LP */ +#define WM831X_REF_LP_MASK 0x1000 /* REF_LP */ +#define WM831X_REF_LP_SHIFT 12 /* REF_LP */ +#define WM831X_REF_LP_WIDTH 1 /* REF_LP */ +#define WM831X_PWRSTATE_DLY_MASK 0x0C00 /* PWRSTATE_DLY - [11:10] */ +#define WM831X_PWRSTATE_DLY_SHIFT 10 /* PWRSTATE_DLY - [11:10] */ +#define WM831X_PWRSTATE_DLY_WIDTH 2 /* PWRSTATE_DLY - [11:10] */ +#define WM831X_SWRST_DLY 0x0200 /* SWRST_DLY */ +#define WM831X_SWRST_DLY_MASK 0x0200 /* SWRST_DLY */ +#define WM831X_SWRST_DLY_SHIFT 9 /* SWRST_DLY */ +#define WM831X_SWRST_DLY_WIDTH 1 /* SWRST_DLY */ +#define WM831X_USB100MA_STARTUP_MASK 0x0030 /* USB100MA_STARTUP - [5:4] */ +#define WM831X_USB100MA_STARTUP_SHIFT 4 /* USB100MA_STARTUP - [5:4] */ +#define WM831X_USB100MA_STARTUP_WIDTH 2 /* USB100MA_STARTUP - [5:4] */ +#define WM831X_USB_CURR_STS 0x0008 /* USB_CURR_STS */ +#define WM831X_USB_CURR_STS_MASK 0x0008 /* USB_CURR_STS */ +#define WM831X_USB_CURR_STS_SHIFT 3 /* USB_CURR_STS */ +#define WM831X_USB_CURR_STS_WIDTH 1 /* USB_CURR_STS */ +#define WM831X_USB_ILIM_MASK 0x0007 /* USB_ILIM - [2:0] */ +#define WM831X_USB_ILIM_SHIFT 0 /* USB_ILIM - [2:0] */ +#define WM831X_USB_ILIM_WIDTH 3 /* USB_ILIM - [2:0] */ + +/* + * R16397 (0x400D) - System Status + */ +#define WM831X_THW_STS 0x8000 /* THW_STS */ +#define WM831X_THW_STS_MASK 0x8000 /* THW_STS */ +#define WM831X_THW_STS_SHIFT 15 /* THW_STS */ +#define WM831X_THW_STS_WIDTH 1 /* THW_STS */ +#define WM831X_PWR_SRC_BATT 0x0400 /* PWR_SRC_BATT */ +#define WM831X_PWR_SRC_BATT_MASK 0x0400 /* PWR_SRC_BATT */ +#define WM831X_PWR_SRC_BATT_SHIFT 10 /* PWR_SRC_BATT */ +#define WM831X_PWR_SRC_BATT_WIDTH 1 /* PWR_SRC_BATT */ +#define WM831X_PWR_WALL 0x0200 /* PWR_WALL */ +#define WM831X_PWR_WALL_MASK 0x0200 /* PWR_WALL */ +#define WM831X_PWR_WALL_SHIFT 9 /* PWR_WALL */ +#define WM831X_PWR_WALL_WIDTH 1 /* PWR_WALL */ +#define WM831X_PWR_USB 0x0100 /* PWR_USB */ +#define WM831X_PWR_USB_MASK 0x0100 /* PWR_USB */ +#define WM831X_PWR_USB_SHIFT 8 /* PWR_USB */ +#define WM831X_PWR_USB_WIDTH 1 /* PWR_USB */ +#define WM831X_MAIN_STATE_MASK 0x001F /* MAIN_STATE - [4:0] */ +#define WM831X_MAIN_STATE_SHIFT 0 /* MAIN_STATE - [4:0] */ +#define WM831X_MAIN_STATE_WIDTH 5 /* MAIN_STATE - [4:0] */ + +/* + * R16456 (0x4048) - Charger Control 1 + */ +#define WM831X_CHG_ENA 0x8000 /* CHG_ENA */ +#define WM831X_CHG_ENA_MASK 0x8000 /* CHG_ENA */ +#define WM831X_CHG_ENA_SHIFT 15 /* CHG_ENA */ +#define WM831X_CHG_ENA_WIDTH 1 /* CHG_ENA */ +#define WM831X_CHG_FRC 0x4000 /* CHG_FRC */ +#define WM831X_CHG_FRC_MASK 0x4000 /* CHG_FRC */ +#define WM831X_CHG_FRC_SHIFT 14 /* CHG_FRC */ +#define WM831X_CHG_FRC_WIDTH 1 /* CHG_FRC */ +#define WM831X_CHG_ITERM_MASK 0x1C00 /* CHG_ITERM - [12:10] */ +#define WM831X_CHG_ITERM_SHIFT 10 /* CHG_ITERM - [12:10] */ +#define WM831X_CHG_ITERM_WIDTH 3 /* CHG_ITERM - [12:10] */ +#define WM831X_CHG_FAST 0x0020 /* CHG_FAST */ +#define WM831X_CHG_FAST_MASK 0x0020 /* CHG_FAST */ +#define WM831X_CHG_FAST_SHIFT 5 /* CHG_FAST */ +#define WM831X_CHG_FAST_WIDTH 1 /* CHG_FAST */ +#define WM831X_CHG_IMON_ENA 0x0002 /* CHG_IMON_ENA */ +#define WM831X_CHG_IMON_ENA_MASK 0x0002 /* CHG_IMON_ENA */ +#define WM831X_CHG_IMON_ENA_SHIFT 1 /* CHG_IMON_ENA */ +#define WM831X_CHG_IMON_ENA_WIDTH 1 /* CHG_IMON_ENA */ +#define WM831X_CHG_CHIP_TEMP_MON 0x0001 /* CHG_CHIP_TEMP_MON */ +#define WM831X_CHG_CHIP_TEMP_MON_MASK 0x0001 /* CHG_CHIP_TEMP_MON */ +#define WM831X_CHG_CHIP_TEMP_MON_SHIFT 0 /* CHG_CHIP_TEMP_MON */ +#define WM831X_CHG_CHIP_TEMP_MON_WIDTH 1 /* CHG_CHIP_TEMP_MON */ + +/* + * R16457 (0x4049) - Charger Control 2 + */ +#define WM831X_CHG_OFF_MSK 0x4000 /* CHG_OFF_MSK */ +#define WM831X_CHG_OFF_MSK_MASK 0x4000 /* CHG_OFF_MSK */ +#define WM831X_CHG_OFF_MSK_SHIFT 14 /* CHG_OFF_MSK */ +#define WM831X_CHG_OFF_MSK_WIDTH 1 /* CHG_OFF_MSK */ +#define WM831X_CHG_TIME_MASK 0x0F00 /* CHG_TIME - [11:8] */ +#define WM831X_CHG_TIME_SHIFT 8 /* CHG_TIME - [11:8] */ +#define WM831X_CHG_TIME_WIDTH 4 /* CHG_TIME - [11:8] */ +#define WM831X_CHG_TRKL_ILIM_MASK 0x00C0 /* CHG_TRKL_ILIM - [7:6] */ +#define WM831X_CHG_TRKL_ILIM_SHIFT 6 /* CHG_TRKL_ILIM - [7:6] */ +#define WM831X_CHG_TRKL_ILIM_WIDTH 2 /* CHG_TRKL_ILIM - [7:6] */ +#define WM831X_CHG_VSEL_MASK 0x0030 /* CHG_VSEL - [5:4] */ +#define WM831X_CHG_VSEL_SHIFT 4 /* CHG_VSEL - [5:4] */ +#define WM831X_CHG_VSEL_WIDTH 2 /* CHG_VSEL - [5:4] */ +#define WM831X_CHG_FAST_ILIM_MASK 0x000F /* CHG_FAST_ILIM - [3:0] */ +#define WM831X_CHG_FAST_ILIM_SHIFT 0 /* CHG_FAST_ILIM - [3:0] */ +#define WM831X_CHG_FAST_ILIM_WIDTH 4 /* CHG_FAST_ILIM - [3:0] */ + +/* + * R16458 (0x404A) - Charger Status + */ +#define WM831X_BATT_OV_STS 0x8000 /* BATT_OV_STS */ +#define WM831X_BATT_OV_STS_MASK 0x8000 /* BATT_OV_STS */ +#define WM831X_BATT_OV_STS_SHIFT 15 /* BATT_OV_STS */ +#define WM831X_BATT_OV_STS_WIDTH 1 /* BATT_OV_STS */ +#define WM831X_CHG_STATE_MASK 0x7000 /* CHG_STATE - [14:12] */ +#define WM831X_CHG_STATE_SHIFT 12 /* CHG_STATE - [14:12] */ +#define WM831X_CHG_STATE_WIDTH 3 /* CHG_STATE - [14:12] */ +#define WM831X_BATT_HOT_STS 0x0800 /* BATT_HOT_STS */ +#define WM831X_BATT_HOT_STS_MASK 0x0800 /* BATT_HOT_STS */ +#define WM831X_BATT_HOT_STS_SHIFT 11 /* BATT_HOT_STS */ +#define WM831X_BATT_HOT_STS_WIDTH 1 /* BATT_HOT_STS */ +#define WM831X_BATT_COLD_STS 0x0400 /* BATT_COLD_STS */ +#define WM831X_BATT_COLD_STS_MASK 0x0400 /* BATT_COLD_STS */ +#define WM831X_BATT_COLD_STS_SHIFT 10 /* BATT_COLD_STS */ +#define WM831X_BATT_COLD_STS_WIDTH 1 /* BATT_COLD_STS */ +#define WM831X_CHG_TOPOFF 0x0200 /* CHG_TOPOFF */ +#define WM831X_CHG_TOPOFF_MASK 0x0200 /* CHG_TOPOFF */ +#define WM831X_CHG_TOPOFF_SHIFT 9 /* CHG_TOPOFF */ +#define WM831X_CHG_TOPOFF_WIDTH 1 /* CHG_TOPOFF */ +#define WM831X_CHG_ACTIVE 0x0100 /* CHG_ACTIVE */ +#define WM831X_CHG_ACTIVE_MASK 0x0100 /* CHG_ACTIVE */ +#define WM831X_CHG_ACTIVE_SHIFT 8 /* CHG_ACTIVE */ +#define WM831X_CHG_ACTIVE_WIDTH 1 /* CHG_ACTIVE */ +#define WM831X_CHG_TIME_ELAPSED_MASK 0x00FF /* CHG_TIME_ELAPSED - [7:0] */ +#define WM831X_CHG_TIME_ELAPSED_SHIFT 0 /* CHG_TIME_ELAPSED - [7:0] */ +#define WM831X_CHG_TIME_ELAPSED_WIDTH 8 /* CHG_TIME_ELAPSED - [7:0] */ + +#define WM831X_CHG_STATE_OFF (0 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_TRICKLE (1 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_FAST (2 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_TRICKLE_OT (3 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_FAST_OT (4 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_DEFECTIVE (5 << WM831X_CHG_STATE_SHIFT) + +/* + * R16459 (0x404B) - Backup Charger Control + */ +#define WM831X_BKUP_CHG_ENA 0x8000 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_ENA_MASK 0x8000 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_ENA_SHIFT 15 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_ENA_WIDTH 1 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_STS 0x4000 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_STS_MASK 0x4000 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_STS_SHIFT 14 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_STS_WIDTH 1 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_MODE 0x1000 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_CHG_MODE_MASK 0x1000 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_CHG_MODE_SHIFT 12 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_CHG_MODE_WIDTH 1 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_BATT_DET_ENA 0x0800 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_DET_ENA_MASK 0x0800 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_DET_ENA_SHIFT 11 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_DET_ENA_WIDTH 1 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_STS 0x0400 /* BKUP_BATT_STS */ +#define WM831X_BKUP_BATT_STS_MASK 0x0400 /* BKUP_BATT_STS */ +#define WM831X_BKUP_BATT_STS_SHIFT 10 /* BKUP_BATT_STS */ +#define WM831X_BKUP_BATT_STS_WIDTH 1 /* BKUP_BATT_STS */ +#define WM831X_BKUP_CHG_VLIM 0x0010 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_VLIM_MASK 0x0010 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_VLIM_SHIFT 4 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_VLIM_WIDTH 1 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_ILIM_MASK 0x0003 /* BKUP_CHG_ILIM - [1:0] */ +#define WM831X_BKUP_CHG_ILIM_SHIFT 0 /* BKUP_CHG_ILIM - [1:0] */ +#define WM831X_BKUP_CHG_ILIM_WIDTH 2 /* BKUP_CHG_ILIM - [1:0] */ + +#endif