diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt index 313dabdc14f9..faa4b44572e3 100644 --- a/Documentation/devicetree/bindings/arm/arm,scpi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt @@ -87,10 +87,33 @@ Required properties: implementation for the IDs to use. For Juno R0 and Juno R1 refer to [3]. +Power domain bindings for the power domains based on SCPI Message Protocol +------------------------------------------------------------ + +This binding uses the generic power domain binding[4]. + +PM domain providers +=================== + +Required properties: + - #power-domain-cells : Should be 1. Contains the device or the power + domain ID value used by SCPI commands. + - num-domains: Total number of power domains provided by SCPI. This is + needed as the SCPI message protocol lacks a mechanism to + query this information at runtime. + +PM domain consumers +=================== + +Required properties: + - power-domains : A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. + [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html [1] Documentation/devicetree/bindings/clock/clock-bindings.txt [2] Documentation/devicetree/bindings/thermal/thermal.txt [3] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html +[4] Documentation/devicetree/bindings/power/power_domain.txt Example: @@ -144,6 +167,12 @@ scpi_protocol: scpi@2e000000 { compatible = "arm,scpi-sensors"; #thermal-sensor-cells = <1>; }; + + scpi_devpd: scpi-power-domains { + compatible = "arm,scpi-power-domains"; + num-domains = <2>; + #power-domain-cells = <1>; + }; }; cpu@0 { @@ -156,6 +185,7 @@ hdlcd@7ff60000 { ... reg = <0 0x7ff60000 0 0x1000>; clocks = <&scpi_clk 4>; + power-domains = <&scpi_devpd 1>; }; thermal-zones { @@ -186,3 +216,7 @@ The thermal-sensors property in the soc_thermal node uses the temperature sensor provided by SCP firmware to setup a thermal zone. The ID "3" is the sensor identifier for the temperature sensor as used by the firmware. + +The num-domains property in scpi-power-domains domain specifies that +SCPI provides 2 power domains. The hdlcd node uses the power domain with +domain ID 1. diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt new file mode 100644 index 000000000000..7ff13be1750b --- /dev/null +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt @@ -0,0 +1,45 @@ +NVIDIA Tegra ACONNECT Bus + +The Tegra ACONNECT bus is an AXI switch which is used to connnect various +components inside the Audio Processing Engine (APE). All CPU accesses to +the APE subsystem go through the ACONNECT via an APB to AXI wrapper. + +Required properties: +- compatible: Must be "nvidia,tegra210-aconnect". +- clocks: Must contain the entries for the APE clock (TEGRA210_CLK_APE), + and APE interface clock (TEGRA210_CLK_APB2APE). +- clock-names: Must contain the names "ape" and "apb2ape" for the corresponding + 'clocks' entries. +- power-domains: Must contain a phandle that points to the audio powergate + (namely 'aud') for Tegra210. +- #address-cells: The number of cells used to represent physical base addresses + in the aconnect address space. Should be 1. +- #size-cells: The number of cells used to represent the size of an address + range in the aconnect address space. Should be 1. +- ranges: Mapping of the aconnect address space to the CPU address space. + +All devices accessed via the ACONNNECT are described by child-nodes. + +Example: + + aconnect@702c0000 { + compatible = "nvidia,tegra210-aconnect"; + clocks = <&tegra_car TEGRA210_CLK_APE>, + <&tegra_car TEGRA210_CLK_APB2APE>; + clock-names = "ape", "apb2ape"; + power-domains = <&pd_audio>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x702c0000 0x0 0x702c0000 0x00040000>; + + status = "disabled"; + + child1 { + ... + }; + + child2 { + ... + }; + }; diff --git a/Documentation/devicetree/bindings/clock/clps711x-clock.txt b/Documentation/devicetree/bindings/clock/clps711x-clock.txt index ce5a7476f05d..f1bd53f79d91 100644 --- a/Documentation/devicetree/bindings/clock/clps711x-clock.txt +++ b/Documentation/devicetree/bindings/clock/clps711x-clock.txt @@ -1,7 +1,7 @@ * Clock bindings for the Cirrus Logic CLPS711X CPUs Required properties: -- compatible : Shall contain "cirrus,clps711x-clk". +- compatible : Shall contain "cirrus,ep7209-clk". - reg : Address of the internal register set. - startup-frequency: Factory set CPU startup frequency in HZ. - #clock-cells : Should be <1>. @@ -13,7 +13,7 @@ for the full list of CLPS711X clock IDs. Example: clks: clks@80000000 { #clock-cells = <1>; - compatible = "cirrus,ep7312-clk", "cirrus,clps711x-clk"; + compatible = "cirrus,ep7312-clk", "cirrus,ep7209-clk"; reg = <0x80000000 0xc000>; startup-frequency = <73728000>; }; diff --git a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt index d685be898d0c..e9c65746e2f1 100644 --- a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt +++ b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt @@ -1,7 +1,7 @@ * Currus Logic CLPS711X Framebuffer Required properties: -- compatible: Shall contain "cirrus,clps711x-fb". +- compatible: Shall contain "cirrus,ep7209-fb". - reg : Physical base address and length of the controller's registers + location and size of the framebuffer memory. - clocks : phandle + clock specifier pair of the FB reference clock. @@ -18,7 +18,7 @@ Optional properties: Example: fb: fb@800002c0 { - compatible = "cirrus,ep7312-fb", "cirrus,clps711x-fb"; + compatible = "cirrus,ep7312-fb", "cirrus,ep7209-fb"; reg = <0x800002c0 0xd44>, <0x60000000 0xc000>; clocks = <&clks 2>; lcd-supply = <®5v0>; diff --git a/Documentation/devicetree/bindings/input/clps711x-keypad.txt b/Documentation/devicetree/bindings/input/clps711x-keypad.txt index e68d2bbc6c07..3eed8819d05d 100644 --- a/Documentation/devicetree/bindings/input/clps711x-keypad.txt +++ b/Documentation/devicetree/bindings/input/clps711x-keypad.txt @@ -1,7 +1,7 @@ * Cirrus Logic CLPS711X matrix keypad device tree bindings Required Properties: -- compatible: Shall contain "cirrus,clps711x-keypad". +- compatible: Shall contain "cirrus,ep7209-keypad". - row-gpios: List of GPIOs used as row lines. - poll-interval: Poll interval time in milliseconds. - linux,keymap: The definition can be found at @@ -12,7 +12,7 @@ Optional Properties: Example: keypad { - compatible = "cirrus,ep7312-keypad", "cirrus,clps711x-keypad"; + compatible = "cirrus,ep7312-keypad", "cirrus,ep7209-keypad"; autorepeat; poll-interval = <120>; row-gpios = <&porta 0 0>, diff --git a/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt index 759339c34e4f..969b4582ec60 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt @@ -2,7 +2,7 @@ Cirrus Logic CLPS711X Interrupt Controller Required properties: -- compatible: Should be "cirrus,clps711x-intc". +- compatible: Should be "cirrus,ep7209-intc". - reg: Specifies base physical address of the registers set. - interrupt-controller: Identifies the node as an interrupt controller. - #interrupt-cells: Specifies the number of cells needed to encode an @@ -34,7 +34,7 @@ ID Name Description Example: intc: interrupt-controller { - compatible = "cirrus,clps711x-intc"; + compatible = "cirrus,ep7312-intc", "cirrus,ep7209-intc"; reg = <0x80000000 0x4000>; interrupt-controller; #interrupt-cells = <1>; diff --git a/Documentation/devicetree/bindings/media/nokia,n900-ir b/Documentation/devicetree/bindings/media/nokia,n900-ir new file mode 100644 index 000000000000..13a18ce37dd1 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nokia,n900-ir @@ -0,0 +1,20 @@ +Device-Tree bindings for LIRC TX driver for Nokia N900(RX51) + +Required properties: + - compatible: should be "nokia,n900-ir". + - pwms: specifies PWM used for IR signal transmission. + +Example node: + + pwm9: dmtimer-pwm@9 { + compatible = "ti,omap-dmtimer-pwm"; + ti,timers = <&timer9>; + ti,clock-source = <0x00>; /* timer_sys_ck */ + #pwm-cells = <3>; + }; + + ir: n900-ir { + compatible = "nokia,n900-ir"; + + pwms = <&pwm9 0 26316 0>; /* 38000 Hz */ + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt b/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt new file mode 100644 index 000000000000..9bb5f57e2066 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt @@ -0,0 +1,136 @@ +* Device tree bindings for Atmel EBI + +The External Bus Interface (EBI) controller is a bus where you can connect +asynchronous (NAND, NOR, SRAM, ....) and synchronous memories (SDR/DDR SDRAMs). +The EBI provides a glue-less interface to asynchronous memories through the SMC +(Static Memory Controller). + +Required properties: + +- compatible: "atmel,at91sam9260-ebi" + "atmel,at91sam9261-ebi" + "atmel,at91sam9263-ebi0" + "atmel,at91sam9263-ebi1" + "atmel,at91sam9rl-ebi" + "atmel,at91sam9g45-ebi" + "atmel,at91sam9x5-ebi" + "atmel,sama5d3-ebi" + +- reg: Contains offset/length value for EBI memory mapping. + This property might contain several entries if the EBI + memory range is not contiguous + +- #address-cells: Must be 2. + The first cell encodes the CS. + The second cell encode the offset into the CS memory + range. + +- #size-cells: Must be set to 1. + +- ranges: Encodes CS to memory region association. + +- clocks: Clock feeding the EBI controller. + See clock-bindings.txt + +Children device nodes are representing device connected to the EBI bus. + +Required device node properties: + +- reg: Contains the chip-select id, the offset and the length + of the memory region requested by the device. + +EBI bus configuration will be defined directly in the device subnode. + +Optional EBI/SMC properties: + +- atmel,smc-bus-width: width of the asynchronous device's data bus + 8, 16 or 32. + Default to 8 when undefined. + +- atmel,smc-byte-access-type "write" or "select" (see Atmel datasheet). + Default to "select" when undefined. + +- atmel,smc-read-mode "nrd" or "ncs". + Default to "ncs" when undefined. + +- atmel,smc-write-mode "nwe" or "ncs". + Default to "ncs" when undefined. + +- atmel,smc-exnw-mode "disabled", "frozen" or "ready". + Default to "disabled" when undefined. + +- atmel,smc-page-mode enable page mode if present. The provided value + defines the page size (supported values: 4, 8, + 16 and 32). + +- atmel,smc-tdf-mode: "normal" or "optimized". When set to + "optimized" the data float time is optimized + depending on the next device being accessed + (next device setup time is subtracted to the + current device data float time). + Default to "normal" when undefined. + +If at least one atmel,smc- property is defined the following SMC timing +properties become mandatory. In the other hand, if none of the atmel,smc- +properties are specified, we assume that the EBI bus configuration will be +handled by the sub-device driver, and none of those properties should be +defined. + +All the timings are expressed in nanoseconds (see Atmel datasheet for a full +description). + +- atmel,smc-ncs-rd-setup-ns +- atmel,smc-nrd-setup-ns +- atmel,smc-ncs-wr-setup-ns +- atmel,smc-nwe-setup-ns +- atmel,smc-ncs-rd-pulse-ns +- atmel,smc-nrd-pulse-ns +- atmel,smc-ncs-wr-pulse-ns +- atmel,smc-nwe-pulse-ns +- atmel,smc-nwe-cycle-ns +- atmel,smc-nrd-cycle-ns +- atmel,smc-tdf-ns + +Example: + + ebi: ebi@10000000 { + compatible = "atmel,sama5d3-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&hsmc>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x10000000 + 0x40000000 0x30000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x40000000 0x10000000 + 0x2 0x0 0x50000000 0x10000000 + 0x3 0x0 0x60000000 0x10000000>; + clocks = <&mck>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ebi_addr>; + + nor: flash@0,0 { + compatible = "cfi-flash"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + + atmel,smc-read-mode = "nrd"; + atmel,smc-write-mode = "nwe"; + atmel,smc-bus-width = <16>; + atmel,smc-ncs-rd-setup-ns = <0>; + atmel,smc-ncs-wr-setup-ns = <0>; + atmel,smc-nwe-setup-ns = <8>; + atmel,smc-nrd-setup-ns = <16>; + atmel,smc-ncs-rd-pulse-ns = <84>; + atmel,smc-ncs-wr-pulse-ns = <84>; + atmel,smc-nrd-pulse-ns = <76>; + atmel,smc-nwe-pulse-ns = <76>; + atmel,smc-nrd-cycle-ns = <107>; + atmel,smc-nwe-cycle-ns = <84>; + atmel,smc-tdf-ns = <16>; + }; + }; + diff --git a/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt b/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt index a183db48f910..c0b2028238d6 100644 --- a/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt @@ -1,15 +1,14 @@ * Cirris Logic CLPS711X PWM controller Required properties: -- compatible: Shall contain "cirrus,clps711x-pwm". +- compatible: Shall contain "cirrus,ep7209-pwm". - reg: Physical base address and length of the controller's registers. - clocks: phandle + clock specifier pair of the PWM reference clock. - #pwm-cells: Should be 1. The cell specifies the index of the channel. Example: pwm: pwm@80000400 { - compatible = "cirrus,ep7312-pwm", - "cirrus,clps711x-pwm"; + compatible = "cirrus,ep7312-pwm", "cirrus,ep7209-pwm"; reg = <0x80000400 0x4>; clocks = <&clks 8>; #pwm-cells = <1>; diff --git a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt index 5befb538db95..2e53324fb720 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt @@ -9,6 +9,10 @@ Required properties: Optional properties: - ti,prescaler: Should be a value between 0 and 7, see the timers datasheet +- ti,clock-source: Set dmtimer parent clock, values between 0 and 2: + - 0x00 - high-frequency system clock (timer_sys_ck) + - 0x01 - 32-kHz always-on clock (timer_32k_ck) + - 0x02 - external clock (timer_ext_ck, OMAP2 only) Example: pwm9: dmtimer-pwm@9 { diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt new file mode 100644 index 000000000000..e746b631793a --- /dev/null +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt @@ -0,0 +1,18 @@ +Amlogic Meson SoC Reset Controller +======================================= + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: Should be "amlogic,meson8b-reset" or "amlogic,meson-gxbb-reset" +- reg: should contain the register address base +- #reset-cells: 1, see below + +example: + +reset: reset-controller { + compatible = "amlogic,meson-gxbb-reset"; + reg = <0x0 0x04404 0x0 0x20>; + #reset-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt index e0b185a944ba..c25da39df707 100644 --- a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt @@ -8,7 +8,9 @@ The reset controller registers are part of the system-ctl block on hi6220 SoC. Required properties: -- compatible: may be "hisilicon,hi6220-sysctrl" +- compatible: should be one of the following: + - "hisilicon,hi6220-sysctrl", "syscon" : For peripheral reset controller. + - "hisilicon,hi6220-mediactrl", "syscon" : For media reset controller. - reg: should be register base and length as documented in the datasheet - #reset-cells: 1, see below diff --git a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt new file mode 100644 index 000000000000..164c7f34c451 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt @@ -0,0 +1,91 @@ +TI SysCon Reset Controller +======================= + +Almost all SoCs have hardware modules that require reset control in addition +to clock and power control for their functionality. The reset control is +typically provided by means of memory-mapped I/O registers. These registers are +sometimes a part of a larger register space region implementing various +functionalities. This register range is best represented as a syscon node to +allow multiple entities to access their relevant registers in the common +register space. + +A SysCon Reset Controller node defines a device that uses a syscon node +and provides reset management functionality for various hardware modules +present on the SoC. + +SysCon Reset Controller Node +============================ +Each of the reset provider/controller nodes should be a child of a syscon +node and have the following properties. + +Required properties: +-------------------- + - compatible : Should be, + "ti,k2e-pscrst" + "ti,k2l-pscrst" + "ti,k2hk-pscrst" + "ti,syscon-reset" + - #reset-cells : Should be 1. Please see the reset consumer node below + for usage details + - ti,reset-bits : Contains the reset control register information + Should contain 7 cells for each reset exposed to + consumers, defined as: + Cell #1 : offset of the reset assert control + register from the syscon register base + Cell #2 : bit position of the reset in the reset + assert control register + Cell #3 : offset of the reset deassert control + register from the syscon register base + Cell #4 : bit position of the reset in the reset + deassert control register + Cell #5 : offset of the reset status register + from the syscon register base + Cell #6 : bit position of the reset in the + reset status register + Cell #7 : Flags used to control reset behavior, + availible flags defined in the DT include + file + +SysCon Reset Consumer Nodes +=========================== +Each of the reset consumer nodes should have the following properties, +in addition to their own properties. + +Required properties: +-------------------- + - resets : A phandle to the reset controller node and an index number + to a reset specifier as defined above. + +Please also refer to Documentation/devicetree/bindings/reset/reset.txt for +common reset controller usage by consumers. + +Example: +-------- +The following example demonstrates a syscon node, the reset controller node +using the syscon node, and a consumer (a DSP device) on the TI Keystone 2 +Edison SoC. + +/ { + soc { + psc: power-sleep-controller@02350000 { + compatible = "syscon", "simple-mfd"; + reg = <0x02350000 0x1000>; + + pscrst: psc-reset { + compatible = "ti,k2e-pscrst", "ti,syscon-reset"; + #reset-cells = <1>; + + ti,reset-bits = < + 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_SET|DEASSERT_CLEAR|STATUS_SET) /* 0: pcrst-dsp0 */ + 0xa40 5 0xa44 3 0 0 (ASSERT_SET|DEASSERT_CLEAR|STATUS_NONE) /* 1: pcrst-example */ + >; + }; + }; + + dsp0: dsp0 { + ... + resets = <&pscrst 0>; + ... + }; + }; +}; diff --git a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt index caaeb2583579..07013fa60a48 100644 --- a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt +++ b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt @@ -1,7 +1,7 @@ * Cirrus Logic CLPS711X Universal Asynchronous Receiver/Transmitter (UART) Required properties: -- compatible: Should be "cirrus,clps711x-uart". +- compatible: Should be "cirrus,ep7209-uart". - reg: Address and length of the register set for the device. - interrupts: Should contain UART TX and RX interrupt. - clocks: Should contain UART core clock number. @@ -20,7 +20,7 @@ Example: }; uart1: uart@80000480 { - compatible = "cirrus,clps711x-uart"; + compatible = "cirrus,ep7312-uart","cirrus,ep7209-uart"; reg = <0x80000480 0x80>; interrupts = <12 13>; clocks = <&clks 11>; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt index 5cc82b8353d8..af9ca37221ce 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt @@ -68,7 +68,7 @@ important. Value type: Definition: must be 2 - denoting the bit in the entry and IRQ flags -- #qcom,state-cells: +- #qcom,smem-state-cells: Usage: required for outgoing entries Value type: Definition: must be 1 - denoting the bit in the entry @@ -92,7 +92,7 @@ wcnss-smp2p { wcnss_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; - #qcom,state-cells = <1>; + #qcom,smem-state-cells = <1>; }; wcnss_smp2p_in: slave-kernel { diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt index a6634c70850d..2993b5a97dd6 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt @@ -51,7 +51,7 @@ important. Definition: specifies the offset, in words, of the first bit for this entry -- #qcom,state-cells: +- #qcom,smem-state-cells: Usage: required for local entry Value type: Definition: must be 1 - denotes bit number @@ -91,7 +91,7 @@ smsm { apps_smsm: apps@0 { reg = <0>; - #qcom,state-cells = <1>; + #qcom,smem-state-cells = <1>; }; wcnss_smsm: wcnss@7 { diff --git a/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt b/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt index cd55b52548e4..d4c62e7b1714 100644 --- a/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt +++ b/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt @@ -1,7 +1,7 @@ * Cirrus Logic CLPS711X Timer Counter Required properties: -- compatible: Shall contain "cirrus,clps711x-timer". +- compatible: Shall contain "cirrus,ep7209-timer". - reg : Address and length of the register set. - interrupts: The interrupt number of the timer. - clocks : phandle of timer reference clock. @@ -15,14 +15,14 @@ Example: }; timer1: timer@80000300 { - compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer"; + compatible = "cirrus,ep7312-timer", "cirrus,ep7209-timer"; reg = <0x80000300 0x4>; interrupts = <8>; clocks = <&clks 5>; }; timer2: timer@80000340 { - compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer"; + compatible = "cirrus,ep7312-timer", "cirrus,ep7209-timer"; reg = <0x80000340 0x4>; interrupts = <9>; clocks = <&clks 6>; diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 589296bdc133..b0d775d28e97 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -352,6 +352,10 @@ REGULATOR devm_regulator_put() devm_regulator_register() +RESET + devm_reset_control_get() + devm_reset_controller_register() + SLAVE DMA ENGINE devm_acpi_dma_controller_register() diff --git a/MAINTAINERS b/MAINTAINERS index 9f5cd4df6797..5f62e4cd900c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1536,6 +1536,7 @@ M: David Brown L: linux-arm-msm@vger.kernel.org L: linux-soc@vger.kernel.org S: Maintained +F: Documentation/devicetree/bindings/soc/qcom/ F: arch/arm/boot/dts/qcom-*.dts F: arch/arm/boot/dts/qcom-*.dtsi F: arch/arm/mach-qcom/ @@ -1841,7 +1842,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://git.linaro.org/people/ulfh/clk.git S: Maintained F: drivers/clk/ux500/ -F: include/linux/platform_data/clk-ux500.h ARM/VERSATILE EXPRESS PLATFORM M: Liviu Dudau diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi new file mode 100644 index 000000000000..c4d063ae6b74 --- /dev/null +++ b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi @@ -0,0 +1,29 @@ +/* + * Samsung's Exynos SoC MFC (Video Codec) reserved memory common definition. + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mfc_left: region@51000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0x51000000 0x800000>; + }; + + mfc_right: region@43000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0x43000000 0x800000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index ad7394c1d67a..f5e4eb23aa21 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -18,6 +18,7 @@ #include "exynos4210.dtsi" #include #include +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4210"; @@ -288,8 +289,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 94ca7d36ab37..de917f0d907d 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -17,6 +17,7 @@ /dts-v1/; #include "exynos4210.dtsi" #include +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Samsung smdkv310 evaluation board based on Exynos4210"; @@ -133,8 +134,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index ec7619a384a2..276ac9a7bb82 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -13,6 +13,7 @@ #include "exynos4412.dtsi" #include "exynos4412-ppmu-common.dtsi" #include +#include "exynos-mfc-reserved-memory.dtsi" / { chosen { @@ -499,6 +500,11 @@ clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; }; +&mfc { + memory-region = <&mfc_left>, <&mfc_right>; + status = "okay"; +}; + &mixer { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 8bca699b7f20..cd363d7e4e34 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -16,6 +16,7 @@ #include "exynos4412.dtsi" #include #include +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4412"; @@ -466,8 +467,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index a51069f3c03b..9b6d561dbdac 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Samsung SMDK evaluation board based on Exynos4412"; @@ -112,8 +113,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 85dad29c08dc..39940f4bd556 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -14,6 +14,7 @@ #include #include #include "exynos5250.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; @@ -516,8 +517,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index b7992b13c9de..9fac874af5eb 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -13,6 +13,7 @@ #include #include #include "exynos5250.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; @@ -344,8 +345,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index ac291f540812..784130bdb6a3 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -14,6 +14,7 @@ #include #include #include "exynos5250.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Google Spring"; @@ -425,8 +426,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 60bc861d0f9d..b8b5f3ae2942 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -16,6 +16,7 @@ #include #include #include +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Arndale Octa evaluation board based on EXYNOS5420"; @@ -347,8 +348,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 1de972d46a87..6b6766e3d90a 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -16,6 +16,7 @@ #include #include "exynos5420.dtsi" #include "exynos5420-cpus.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Google Peach Pit Rev 6+"; @@ -702,8 +703,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 2e748d19322f..5206f41e548d 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -13,6 +13,7 @@ #include "exynos5420.dtsi" #include "exynos5420-cpus.dtsi" #include +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Samsung SMDK5420 board based on EXYNOS5420"; @@ -355,8 +356,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 2a4e10bc8801..7c2335f18bfc 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -17,6 +17,7 @@ #include "exynos5800.dtsi" #include "exynos5422-cpus.dtsi" #include "exynos5422-cpu-thermal.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { memory { @@ -406,8 +407,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 62ceb89e073f..1f735963ca98 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -16,6 +16,7 @@ #include #include "exynos5800.dtsi" #include "exynos5420-cpus.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Google Peach Pi Rev 10+"; @@ -670,8 +671,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index ecf139f31c4c..8f820de890b4 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -18,6 +18,7 @@ menuconfig ARCH_EXYNOS select EXYNOS_THERMAL select EXYNOS_PMU select EXYNOS_SROM + select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS select GPIOLIB select HAVE_ARM_SCU if SMP select HAVE_S3C2410_I2C if I2C diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 34d29df3e006..9ea6c54645ad 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o obj-$(CONFIG_PM_SLEEP) += suspend.o -obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o @@ -23,5 +22,3 @@ AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec) obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o CFLAGS_mcpm-exynos.o += -march=armv7-a - -obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index ecbfa5dd3c54..acabf0bffc5d 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -27,7 +27,6 @@ #include #include "common.h" -#include "mfc.h" static struct map_desc exynos4_iodesc[] __initdata = { { @@ -235,23 +234,6 @@ static char const *const exynos_dt_compat[] __initconst = { NULL }; -static void __init exynos_reserve(void) -{ -#ifdef CONFIG_S5P_DEV_MFC - int i; - char *mfc_mem[] = { - "samsung,mfc-v5", - "samsung,mfc-v6", - "samsung,mfc-v7", - "samsung,mfc-v8", - }; - - for (i = 0; i < ARRAY_SIZE(mfc_mem); i++) - if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i])) - break; -#endif -} - static void __init exynos_dt_fixup(void) { /* @@ -273,6 +255,5 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)") .init_machine = exynos_dt_machine_init, .init_late = exynos_init_late, .dt_compat = exynos_dt_compat, - .reserve = exynos_reserve, .dt_fixup = exynos_dt_fixup, MACHINE_END diff --git a/arch/arm/mach-exynos/mfc.h b/arch/arm/mach-exynos/mfc.h deleted file mode 100644 index dec93cd5b3c6..000000000000 --- a/arch/arm/mach-exynos/mfc.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2013 Samsung Electronics Co.Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __MACH_EXYNOS_MFC_H -#define __MACH_EXYNOS_MFC_H __FILE__ - -int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname, - int depth, void *data); - -#endif /* __MACH_EXYNOS_MFC_H */ diff --git a/arch/arm/mach-exynos/s5p-dev-mfc.c b/arch/arm/mach-exynos/s5p-dev-mfc.c deleted file mode 100644 index 8ef1f3ee4e98..000000000000 --- a/arch/arm/mach-exynos/s5p-dev-mfc.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd - * - * Base S5P MFC resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include - -static struct platform_device s5p_device_mfc_l; -static struct platform_device s5p_device_mfc_r; - -struct s5p_mfc_dt_meminfo { - unsigned long loff; - unsigned long lsize; - unsigned long roff; - unsigned long rsize; - char *compatible; -}; - -struct s5p_mfc_reserved_mem { - phys_addr_t base; - unsigned long size; - struct device *dev; -}; - -static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata; - - -static void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, - phys_addr_t lbase, unsigned int lsize) -{ - int i; - - s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev; - s5p_mfc_mem[0].base = rbase; - s5p_mfc_mem[0].size = rsize; - - s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev; - s5p_mfc_mem[1].base = lbase; - s5p_mfc_mem[1].size = lsize; - - for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) { - struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i]; - if (memblock_remove(area->base, area->size)) { - printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n", - area->size, (unsigned long) area->base); - area->base = 0; - } - } -} - -int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname, - int depth, void *data) -{ - const __be32 *prop; - int len; - struct s5p_mfc_dt_meminfo mfc_mem; - - if (!data) - return 0; - - if (!of_flat_dt_is_compatible(node, data)) - return 0; - - prop = of_get_flat_dt_prop(node, "samsung,mfc-l", &len); - if (!prop || (len != 2 * sizeof(unsigned long))) - return 0; - - mfc_mem.loff = be32_to_cpu(prop[0]); - mfc_mem.lsize = be32_to_cpu(prop[1]); - - prop = of_get_flat_dt_prop(node, "samsung,mfc-r", &len); - if (!prop || (len != 2 * sizeof(unsigned long))) - return 0; - - mfc_mem.roff = be32_to_cpu(prop[0]); - mfc_mem.rsize = be32_to_cpu(prop[1]); - - s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, - mfc_mem.loff, mfc_mem.lsize); - - return 1; -} diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 9a7073949d1d..a5ab712c1a59 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -1242,11 +1242,6 @@ static struct pwm_omap_dmtimer_pdata __maybe_unused pwm_dmtimer_pdata = { #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) static struct lirc_rx51_platform_data rx51_lirc_data = { .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, - .pwm_timer = 9, /* Use GPT 9 for CIR */ -#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) - .dmtimer = &pwm_dmtimer_pdata, -#endif - }; static struct platform_device rx51_lirc_device = { diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index ab2b2b2b90e5..05e20aaf68dd 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -274,8 +274,6 @@ static struct platform_device omap3_rom_rng_device = { }, }; -static struct platform_device rx51_lirc_device; - static void __init nokia_n900_legacy_init(void) { hsmmc2_internal_input_clk(); @@ -294,10 +292,7 @@ static void __init nokia_n900_legacy_init(void) pr_info("RX-51: Registering OMAP3 HWRNG device\n"); platform_device_register(&omap3_rom_rng_device); - } - - platform_device_register(&rx51_lirc_device); } static void __init omap3_tao3530_legacy_init(void) @@ -492,10 +487,6 @@ static struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = { static struct lirc_rx51_platform_data __maybe_unused rx51_lirc_data = { .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, - .pwm_timer = 9, /* Use GPT 9 for CIR */ -#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) - .dmtimer = &pwm_dmtimer_pdata, -#endif }; static struct platform_device __maybe_unused rx51_lirc_device = { @@ -543,6 +534,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { &omap3_iommu_pdata), OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x4809c000, "4809c000.mmc", &mmc_pdata[0]), OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x480b4000, "480b4000.mmc", &mmc_pdata[1]), + OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_lirc_data), /* Only on am3517 */ OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL), OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0", diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index edfff1ae1f8d..56d0eb6e254e 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -2,11 +2,9 @@ # Makefile for the linux kernel, U8500 machine. # -obj-y := cpu.o id.o pm.o -obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o +obj-y := pm.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o -obj-$(CONFIG_MACH_MOP500) += board-mop500-regulators.o \ - board-mop500-audio.o +obj-$(CONFIG_MACH_MOP500) += board-mop500-audio.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c deleted file mode 100644 index 32d744e91ec2..000000000000 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ /dev/null @@ -1,1065 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * - * Authors: Sundar Iyer - * Bengt Jonsson - * Daniel Willerud - * - * MOP500 board specific initialization for regulators - */ -#include -#include -#include -#include "board-mop500-regulators.h" -#include "id.h" - -static struct regulator_consumer_supply gpio_en_3v3_consumers[] = { - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -struct regulator_init_data gpio_en_3v3_regulator = { - .constraints = { - .name = "EN-3V3", - .min_uV = 3300000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers), - .consumer_supplies = gpio_en_3v3_consumers, -}; - -/* - * TPS61052 regulator - */ -static struct regulator_consumer_supply tps61052_vaudio_consumers[] = { - /* - * Boost converter supply to raise voltage on audio speaker, this - * is actually connected to three pins, VInVhfL (left amplifier) - * VInVhfR (right amplifier) and VIntDClassInt - all three must - * be connected to the same voltage. - */ - REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"), -}; - -struct regulator_init_data tps61052_regulator = { - .constraints = { - .name = "vaudio-hf", - .min_uV = 4500000, - .max_uV = 4500000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers), - .consumer_supplies = tps61052_vaudio_consumers, -}; - -static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { - /* Main display, u8500 R3 uib */ - REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"), - /* Main display, u8500 uib and ST uib */ - REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"), - /* Secondary display, ST uib */ - REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"), - /* SFH7741 proximity sensor */ - REGULATOR_SUPPLY("vcc", "gpio-keys.0"), - /* BH1780GLS ambient light sensor */ - REGULATOR_SUPPLY("vcc", "2-0029"), - /* lsm303dlh accelerometer */ - REGULATOR_SUPPLY("vdd", "2-0018"), - /* lsm303dlhc accelerometer */ - REGULATOR_SUPPLY("vdd", "2-0019"), - /* lsm303dlh magnetometer */ - REGULATOR_SUPPLY("vdd", "2-001e"), - /* Rohm BU21013 Touchscreen devices */ - REGULATOR_SUPPLY("avdd", "3-005c"), - REGULATOR_SUPPLY("avdd", "3-005d"), - /* Synaptics RMI4 Touchscreen device */ - REGULATOR_SUPPLY("vdd", "3-004b"), - /* L3G4200D Gyroscope device */ - REGULATOR_SUPPLY("vdd", "2-0068"), - /* Ambient light sensor device */ - REGULATOR_SUPPLY("vdd", "3-0029"), - /* Pressure sensor device */ - REGULATOR_SUPPLY("vdd", "2-005c"), - /* Cypress TrueTouch Touchscreen device */ - REGULATOR_SUPPLY("vcpin", "spi8.0"), - /* Camera device */ - REGULATOR_SUPPLY("vaux12v5", "mmio_camera"), -}; - -static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { - /* On-board eMMC power */ - REGULATOR_SUPPLY("vmmc", "sdi4"), - /* AB8500 audio codec */ - REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"), - /* AB8500 accessory detect 1 */ - REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"), - /* AB8500 Tv-out device */ - REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"), - /* AV8100 HDMI device */ - REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"), -}; - -static struct regulator_consumer_supply ab8500_vaux3_consumers[] = { - REGULATOR_SUPPLY("v-SD-STM", "stm"), - /* External MMC slot power */ - REGULATOR_SUPPLY("vmmc", "sdi0"), -}; - -static struct regulator_consumer_supply ab8505_vaux4_consumers[] = { -}; - -static struct regulator_consumer_supply ab8505_vaux5_consumers[] = { -}; - -static struct regulator_consumer_supply ab8505_vaux6_consumers[] = { -}; - -static struct regulator_consumer_supply ab8505_vaux8_consumers[] = { - /* AB8500 audio codec device */ - REGULATOR_SUPPLY("v-aux8", NULL), -}; - -static struct regulator_consumer_supply ab8505_vadc_consumers[] = { - /* Internal general-purpose ADC */ - REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), - /* ADC for charger */ - REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), -}; - -static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { - /* TV-out DENC supply */ - REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"), - /* Internal general-purpose ADC */ - REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), - /* ADC for charger */ - REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), - /* AB8500 Tv-out device */ - REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"), -}; - -static struct regulator_consumer_supply ab8500_vaud_consumers[] = { - /* AB8500 audio-codec main supply */ - REGULATOR_SUPPLY("vaud", "ab8500-codec.0"), -}; - -static struct regulator_consumer_supply ab8500_vamic1_consumers[] = { - /* AB8500 audio-codec Mic1 supply */ - REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"), -}; - -static struct regulator_consumer_supply ab8500_vamic2_consumers[] = { - /* AB8500 audio-codec Mic2 supply */ - REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"), -}; - -static struct regulator_consumer_supply ab8500_vdmic_consumers[] = { - /* AB8500 audio-codec DMic supply */ - REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"), -}; - -static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { - /* SoC core supply, no device */ - REGULATOR_SUPPLY("v-intcore", NULL), - /* USB Transceiver */ - REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"), - /* Handled by abx500 clk driver */ - REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"), -}; - -static struct regulator_consumer_supply ab8505_usb_consumers[] = { - /* HS USB OTG physical interface */ - REGULATOR_SUPPLY("v-ape", NULL), -}; - -static struct regulator_consumer_supply ab8500_vana_consumers[] = { - /* DB8500 DSI */ - REGULATOR_SUPPLY("vdddsi1v2", "mcde"), - REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"), - REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"), - REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"), - REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"), - REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"), - /* DB8500 CSI */ - REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"), -}; - -/* ab8500 regulator register initialization */ -static struct ab8500_regulator_reg_init ab8500_reg_init[] = { - /* - * VanaRequestCtrl = HP/LP depending on VxRequest - * VextSupply1RequestCtrl = HP/LP depending on VxRequest - */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00), - /* - * VextSupply2RequestCtrl = HP/LP depending on VxRequest - * VextSupply3RequestCtrl = HP/LP depending on VxRequest - * Vaux1RequestCtrl = HP/LP depending on VxRequest - * Vaux2RequestCtrl = HP/LP depending on VxRequest - */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00), - /* - * Vaux3RequestCtrl = HP/LP depending on VxRequest - * SwHPReq = Control through SWValid disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00), - /* - * VanaSysClkReq1HPValid = disabled - * Vaux1SysClkReq1HPValid = disabled - * Vaux2SysClkReq1HPValid = disabled - * Vaux3SysClkReq1HPValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), - /* - * VextSupply1SysClkReq1HPValid = disabled - * VextSupply2SysClkReq1HPValid = disabled - * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40), - /* - * VanaHwHPReq1Valid = disabled - * Vaux1HwHPreq1Valid = disabled - * Vaux2HwHPReq1Valid = disabled - * Vaux3HwHPReqValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00), - /* - * VextSupply1HwHPReq1Valid = disabled - * VextSupply2HwHPReq1Valid = disabled - * VextSupply3HwHPReq1Valid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00), - /* - * VanaHwHPReq2Valid = disabled - * Vaux1HwHPReq2Valid = disabled - * Vaux2HwHPReq2Valid = disabled - * Vaux3HwHPReq2Valid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00), - /* - * VextSupply1HwHPReq2Valid = disabled - * VextSupply2HwHPReq2Valid = disabled - * VextSupply3HwHPReq2Valid = HWReq2 controlled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04), - /* - * VanaSwHPReqValid = disabled - * Vaux1SwHPReqValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00), - /* - * Vaux2SwHPReqValid = disabled - * Vaux3SwHPReqValid = disabled - * VextSupply1SwHPReqValid = disabled - * VextSupply2SwHPReqValid = disabled - * VextSupply3SwHPReqValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00), - /* - * SysClkReq2Valid1 = SysClkReq2 controlled - * SysClkReq3Valid1 = disabled - * SysClkReq4Valid1 = SysClkReq4 controlled - * SysClkReq5Valid1 = disabled - * SysClkReq6Valid1 = SysClkReq6 controlled - * SysClkReq7Valid1 = disabled - * SysClkReq8Valid1 = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a), - /* - * SysClkReq2Valid2 = disabled - * SysClkReq3Valid2 = disabled - * SysClkReq4Valid2 = disabled - * SysClkReq5Valid2 = disabled - * SysClkReq6Valid2 = SysClkReq6 controlled - * SysClkReq7Valid2 = disabled - * SysClkReq8Valid2 = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20), - /* - * VTVoutEna = disabled - * Vintcore12Ena = disabled - * Vintcore12Sel = 1.25 V - * Vintcore12LP = inactive (HP) - * VTVoutLP = inactive (HP) - */ - INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10), - /* - * VaudioEna = disabled - * VdmicEna = disabled - * Vamic1Ena = disabled - * Vamic2Ena = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00), - /* - * Vamic1_dzout = high-Z when Vamic1 is disabled - * Vamic2_dzout = high-Z when Vamic2 is disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00), - /* - * VPll = Hw controlled (NOTE! PRCMU bits) - * VanaRegu = force off - */ - INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02), - /* - * VrefDDREna = disabled - * VrefDDRSleepMode = inactive (no pulldown) - */ - INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00), - /* - * VextSupply1Regu = force LP - * VextSupply2Regu = force OFF - * VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP) - * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 - * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 - */ - INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13), - /* - * Vaux1Regu = force HP - * Vaux2Regu = force off - */ - INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01), - /* - * Vaux3Regu = force off - */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00), - /* - * Vaux1Sel = 2.8 V - */ - INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C), - /* - * Vaux2Sel = 2.9 V - */ - INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d), - /* - * Vaux3Sel = 2.91 V - */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07), - /* - * VextSupply12LP = disabled (no LP) - */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00), - /* - * Vaux1Disch = short discharge time - * Vaux2Disch = short discharge time - * Vaux3Disch = short discharge time - * Vintcore12Disch = short discharge time - * VTVoutDisch = short discharge time - * VaudioDisch = short discharge time - */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00), - /* - * VanaDisch = short discharge time - * VdmicPullDownEna = pulldown disabled when Vdmic is disabled - * VdmicDisch = short discharge time - */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00), -}; - -/* AB8500 regulators */ -static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { - /* supplies to the display/camera */ - [AB8500_LDO_AUX1] = { - .supply_regulator = "ab8500-ext-supply3", - .constraints = { - .name = "V-DISPLAY", - .min_uV = 2800000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .boot_on = 1, /* display is on at boot */ - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), - .consumer_supplies = ab8500_vaux1_consumers, - }, - /* supplies to the on-board eMMC */ - [AB8500_LDO_AUX2] = { - .supply_regulator = "ab8500-ext-supply3", - .constraints = { - .name = "V-eMMC1", - .min_uV = 1100000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), - .consumer_supplies = ab8500_vaux2_consumers, - }, - /* supply for VAUX3, supplies to SDcard slots */ - [AB8500_LDO_AUX3] = { - .supply_regulator = "ab8500-ext-supply3", - .constraints = { - .name = "V-MMC-SD", - .min_uV = 1100000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), - .consumer_supplies = ab8500_vaux3_consumers, - }, - /* supply for tvout, gpadc, TVOUT LDO */ - [AB8500_LDO_TVOUT] = { - .constraints = { - .name = "V-TVOUT", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers), - .consumer_supplies = ab8500_vtvout_consumers, - }, - /* supply for ab8500-vaudio, VAUDIO LDO */ - [AB8500_LDO_AUDIO] = { - .constraints = { - .name = "V-AUD", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), - .consumer_supplies = ab8500_vaud_consumers, - }, - /* supply for v-anamic1 VAMic1-LDO */ - [AB8500_LDO_ANAMIC1] = { - .constraints = { - .name = "V-AMIC1", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), - .consumer_supplies = ab8500_vamic1_consumers, - }, - /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ - [AB8500_LDO_ANAMIC2] = { - .constraints = { - .name = "V-AMIC2", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), - .consumer_supplies = ab8500_vamic2_consumers, - }, - /* supply for v-dmic, VDMIC LDO */ - [AB8500_LDO_DMIC] = { - .constraints = { - .name = "V-DMIC", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers), - .consumer_supplies = ab8500_vdmic_consumers, - }, - /* supply for v-intcore12, VINTCORE12 LDO */ - [AB8500_LDO_INTCORE] = { - .constraints = { - .name = "V-INTCORE", - .min_uV = 1250000, - .max_uV = 1350000, - .input_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE | - REGULATOR_CHANGE_DRMS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), - .consumer_supplies = ab8500_vintcore_consumers, - }, - /* supply for U8500 CSI-DSI, VANA LDO */ - [AB8500_LDO_ANA] = { - .constraints = { - .name = "V-CSI-DSI", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), - .consumer_supplies = ab8500_vana_consumers, - }, -}; - -/* supply for VextSupply3 */ -static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = { - /* SIM supply for 3 V SIM cards */ - REGULATOR_SUPPLY("vinvsim", "sim-detect.0"), -}; - -/* extended configuration for VextSupply2, only used for HREFP_V20 boards */ -static struct ab8500_ext_regulator_cfg ab8500_ext_supply2 = { - .hwreq = true, -}; - -/* - * AB8500 external regulators - */ -static struct regulator_init_data ab8500_ext_regulators[] = { - /* fixed Vbat supplies VSMPS1_EXT_1V8 */ - [AB8500_EXT_SUPPLY1] = { - .constraints = { - .name = "ab8500-ext-supply1", - .min_uV = 1800000, - .max_uV = 1800000, - .initial_mode = REGULATOR_MODE_IDLE, - .boot_on = 1, - .always_on = 1, - }, - }, - /* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */ - [AB8500_EXT_SUPPLY2] = { - .constraints = { - .name = "ab8500-ext-supply2", - .min_uV = 1360000, - .max_uV = 1360000, - }, - }, - /* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */ - [AB8500_EXT_SUPPLY3] = { - .constraints = { - .name = "ab8500-ext-supply3", - .min_uV = 3400000, - .max_uV = 3400000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .boot_on = 1, - }, - .num_consumer_supplies = - ARRAY_SIZE(ab8500_ext_supply3_consumers), - .consumer_supplies = ab8500_ext_supply3_consumers, - }, -}; - -/* ab8505 regulator register initialization */ -static struct ab8500_regulator_reg_init ab8505_reg_init[] = { - /* - * VarmRequestCtrl - * VsmpsCRequestCtrl - * VsmpsARequestCtrl - * VsmpsBRequestCtrl - */ - INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL1, 0x00, 0x00), - /* - * VsafeRequestCtrl - * VpllRequestCtrl - * VanaRequestCtrl = HP/LP depending on VxRequest - */ - INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL2, 0x30, 0x00), - /* - * Vaux1RequestCtrl = HP/LP depending on VxRequest - * Vaux2RequestCtrl = HP/LP depending on VxRequest - */ - INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL3, 0xf0, 0x00), - /* - * Vaux3RequestCtrl = HP/LP depending on VxRequest - * SwHPReq = Control through SWValid disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL4, 0x07, 0x00), - /* - * VsmpsASysClkReq1HPValid - * VsmpsBSysClkReq1HPValid - * VsafeSysClkReq1HPValid - * VanaSysClkReq1HPValid = disabled - * VpllSysClkReq1HPValid - * Vaux1SysClkReq1HPValid = disabled - * Vaux2SysClkReq1HPValid = disabled - * Vaux3SysClkReq1HPValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), - /* - * VsmpsCSysClkReq1HPValid - * VarmSysClkReq1HPValid - * VbbSysClkReq1HPValid - * VsmpsMSysClkReq1HPValid - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID2, 0x00, 0x00), - /* - * VsmpsAHwHPReq1Valid - * VsmpsBHwHPReq1Valid - * VsafeHwHPReq1Valid - * VanaHwHPReq1Valid = disabled - * VpllHwHPReq1Valid - * Vaux1HwHPreq1Valid = disabled - * Vaux2HwHPReq1Valid = disabled - * Vaux3HwHPReqValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID1, 0xe8, 0x00), - /* - * VsmpsMHwHPReq1Valid - */ - INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID2, 0x00, 0x00), - /* - * VsmpsAHwHPReq2Valid - * VsmpsBHwHPReq2Valid - * VsafeHwHPReq2Valid - * VanaHwHPReq2Valid = disabled - * VpllHwHPReq2Valid - * Vaux1HwHPReq2Valid = disabled - * Vaux2HwHPReq2Valid = disabled - * Vaux3HwHPReq2Valid = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID1, 0xe8, 0x00), - /* - * VsmpsMHwHPReq2Valid - */ - INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID2, 0x00, 0x00), - /** - * VsmpsCSwHPReqValid - * VarmSwHPReqValid - * VsmpsASwHPReqValid - * VsmpsBSwHPReqValid - * VsafeSwHPReqValid - * VanaSwHPReqValid - * VanaSwHPReqValid = disabled - * VpllSwHPReqValid - * Vaux1SwHPReqValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID1, 0xa0, 0x00), - /* - * Vaux2SwHPReqValid = disabled - * Vaux3SwHPReqValid = disabled - * VsmpsMSwHPReqValid - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID2, 0x03, 0x00), - /* - * SysClkReq2Valid1 = SysClkReq2 controlled - * SysClkReq3Valid1 = disabled - * SysClkReq4Valid1 = SysClkReq4 controlled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID1, 0x0e, 0x0a), - /* - * SysClkReq2Valid2 = disabled - * SysClkReq3Valid2 = disabled - * SysClkReq4Valid2 = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID2, 0x0e, 0x00), - /* - * Vaux4SwHPReqValid - * Vaux4HwHPReq2Valid - * Vaux4HwHPReq1Valid - * Vaux4SysClkReq1HPValid - */ - INIT_REGULATOR_REGISTER(AB8505_REGUVAUX4REQVALID, 0x00, 0x00), - /* - * VadcEna = disabled - * VintCore12Ena = disabled - * VintCore12Sel = 1.25 V - * VintCore12LP = inactive (HP) - * VadcLP = inactive (HP) - */ - INIT_REGULATOR_REGISTER(AB8505_REGUMISC1, 0xfe, 0x10), - /* - * VaudioEna = disabled - * Vaux8Ena = disabled - * Vamic1Ena = disabled - * Vamic2Ena = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_VAUDIOSUPPLY, 0x1e, 0x00), - /* - * Vamic1_dzout = high-Z when Vamic1 is disabled - * Vamic2_dzout = high-Z when Vamic2 is disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUCTRL1VAMIC, 0x03, 0x00), - /* - * VsmpsARegu - * VsmpsASelCtrl - * VsmpsAAutoMode - * VsmpsAPWMMode - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSAREGU, 0x00, 0x00), - /* - * VsmpsBRegu - * VsmpsBSelCtrl - * VsmpsBAutoMode - * VsmpsBPWMMode - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSBREGU, 0x00, 0x00), - /* - * VsafeRegu - * VsafeSelCtrl - * VsafeAutoMode - * VsafePWMMode - */ - INIT_REGULATOR_REGISTER(AB8505_VSAFEREGU, 0x00, 0x00), - /* - * VPll = Hw controlled (NOTE! PRCMU bits) - * VanaRegu = force off - */ - INIT_REGULATOR_REGISTER(AB8505_VPLLVANAREGU, 0x0f, 0x02), - /* - * VextSupply1Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) - * VextSupply2Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) - * VextSupply3Regu = force OFF (OTP_ExtSupply3LPnPolarity 0) - * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 - * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 - */ - INIT_REGULATOR_REGISTER(AB8505_EXTSUPPLYREGU, 0xff, 0x30), - /* - * Vaux1Regu = force HP - * Vaux2Regu = force off - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX12REGU, 0x0f, 0x01), - /* - * Vaux3Regu = force off - */ - INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3REGU, 0x03, 0x00), - /* - * VsmpsASel1 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL1, 0x00, 0x00), - /* - * VsmpsASel2 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL2, 0x00, 0x00), - /* - * VsmpsASel3 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL3, 0x00, 0x00), - /* - * VsmpsBSel1 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL1, 0x00, 0x00), - /* - * VsmpsBSel2 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL2, 0x00, 0x00), - /* - * VsmpsBSel3 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL3, 0x00, 0x00), - /* - * VsafeSel1 - */ - INIT_REGULATOR_REGISTER(AB8505_VSAFESEL1, 0x00, 0x00), - /* - * VsafeSel2 - */ - INIT_REGULATOR_REGISTER(AB8505_VSAFESEL2, 0x00, 0x00), - /* - * VsafeSel3 - */ - INIT_REGULATOR_REGISTER(AB8505_VSAFESEL3, 0x00, 0x00), - /* - * Vaux1Sel = 2.8 V - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX1SEL, 0x0f, 0x0C), - /* - * Vaux2Sel = 2.9 V - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX2SEL, 0x0f, 0x0d), - /* - * Vaux3Sel = 2.91 V - */ - INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3SEL, 0x07, 0x07), - /* - * Vaux4RequestCtrl - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX4REQCTRL, 0x00, 0x00), - /* - * Vaux4Regu - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX4REGU, 0x00, 0x00), - /* - * Vaux4Sel - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX4SEL, 0x00, 0x00), - /* - * Vaux1Disch = short discharge time - * Vaux2Disch = short discharge time - * Vaux3Disch = short discharge time - * Vintcore12Disch = short discharge time - * VTVoutDisch = short discharge time - * VaudioDisch = short discharge time - */ - INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH, 0xfc, 0x00), - /* - * VanaDisch = short discharge time - * Vaux8PullDownEna = pulldown disabled when Vaux8 is disabled - * Vaux8Disch = short discharge time - */ - INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH2, 0x16, 0x00), - /* - * Vaux4Disch = short discharge time - */ - INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH3, 0x01, 0x00), - /* - * Vaux5Sel - * Vaux5LP - * Vaux5Ena - * Vaux5Disch - * Vaux5DisSfst - * Vaux5DisPulld - */ - INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX5, 0x00, 0x00), - /* - * Vaux6Sel - * Vaux6LP - * Vaux6Ena - * Vaux6DisPulld - */ - INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX6, 0x00, 0x00), -}; - -static struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = { - /* supplies to the display/camera */ - [AB8505_LDO_AUX1] = { - .constraints = { - .name = "V-DISPLAY", - .min_uV = 2800000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .boot_on = 1, /* display is on at boot */ - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), - .consumer_supplies = ab8500_vaux1_consumers, - }, - /* supplies to the on-board eMMC */ - [AB8505_LDO_AUX2] = { - .constraints = { - .name = "V-eMMC1", - .min_uV = 1100000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), - .consumer_supplies = ab8500_vaux2_consumers, - }, - /* supply for VAUX3, supplies to SDcard slots */ - [AB8505_LDO_AUX3] = { - .constraints = { - .name = "V-MMC-SD", - .min_uV = 1100000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), - .consumer_supplies = ab8500_vaux3_consumers, - }, - /* supply for VAUX4, supplies to NFC and standalone secure element */ - [AB8505_LDO_AUX4] = { - .constraints = { - .name = "V-NFC-SE", - .min_uV = 1100000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux4_consumers), - .consumer_supplies = ab8505_vaux4_consumers, - }, - /* supply for VAUX5, supplies to TBD */ - [AB8505_LDO_AUX5] = { - .constraints = { - .name = "V-AUX5", - .min_uV = 1050000, - .max_uV = 2790000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux5_consumers), - .consumer_supplies = ab8505_vaux5_consumers, - }, - /* supply for VAUX6, supplies to TBD */ - [AB8505_LDO_AUX6] = { - .constraints = { - .name = "V-AUX6", - .min_uV = 1050000, - .max_uV = 2790000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux6_consumers), - .consumer_supplies = ab8505_vaux6_consumers, - }, - /* supply for gpadc, ADC LDO */ - [AB8505_LDO_ADC] = { - .constraints = { - .name = "V-ADC", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_vadc_consumers), - .consumer_supplies = ab8505_vadc_consumers, - }, - /* supply for ab8500-vaudio, VAUDIO LDO */ - [AB8505_LDO_AUDIO] = { - .constraints = { - .name = "V-AUD", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), - .consumer_supplies = ab8500_vaud_consumers, - }, - /* supply for v-anamic1 VAMic1-LDO */ - [AB8505_LDO_ANAMIC1] = { - .constraints = { - .name = "V-AMIC1", - .valid_ops_mask = REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), - .consumer_supplies = ab8500_vamic1_consumers, - }, - /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ - [AB8505_LDO_ANAMIC2] = { - .constraints = { - .name = "V-AMIC2", - .valid_ops_mask = REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), - .consumer_supplies = ab8500_vamic2_consumers, - }, - /* supply for v-aux8, VAUX8 LDO */ - [AB8505_LDO_AUX8] = { - .constraints = { - .name = "V-AUX8", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux8_consumers), - .consumer_supplies = ab8505_vaux8_consumers, - }, - /* supply for v-intcore12, VINTCORE12 LDO */ - [AB8505_LDO_INTCORE] = { - .constraints = { - .name = "V-INTCORE", - .min_uV = 1250000, - .max_uV = 1350000, - .input_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE | - REGULATOR_CHANGE_DRMS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), - .consumer_supplies = ab8500_vintcore_consumers, - }, - /* supply for LDO USB */ - [AB8505_LDO_USB] = { - .constraints = { - .name = "V-USB", - .valid_ops_mask = REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_usb_consumers), - .consumer_supplies = ab8505_usb_consumers, - }, - /* supply for U8500 CSI-DSI, VANA LDO */ - [AB8505_LDO_ANA] = { - .constraints = { - .name = "V-CSI-DSI", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), - .consumer_supplies = ab8500_vana_consumers, - }, -}; - -struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { - .reg_init = ab8500_reg_init, - .num_reg_init = ARRAY_SIZE(ab8500_reg_init), - .regulator = ab8500_regulators, - .num_regulator = ARRAY_SIZE(ab8500_regulators), - .ext_regulator = ab8500_ext_regulators, - .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators), -}; - -struct ab8500_regulator_platform_data ab8505_regulator_plat_data = { - .reg_init = ab8505_reg_init, - .num_reg_init = ARRAY_SIZE(ab8505_reg_init), - .regulator = ab8505_regulators, - .num_regulator = ARRAY_SIZE(ab8505_regulators), -}; - -static void ab8500_modify_reg_init(int id, u8 mask, u8 value) -{ - int i; - - if (cpu_is_u8520()) { - for (i = ARRAY_SIZE(ab8505_reg_init) - 1; i >= 0; i--) { - if (ab8505_reg_init[i].id == id) { - u8 initval = ab8505_reg_init[i].value; - initval = (initval & ~mask) | (value & mask); - ab8505_reg_init[i].value = initval; - - BUG_ON(mask & ~ab8505_reg_init[i].mask); - return; - } - } - } else { - for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) { - if (ab8500_reg_init[i].id == id) { - u8 initval = ab8500_reg_init[i].value; - initval = (initval & ~mask) | (value & mask); - ab8500_reg_init[i].value = initval; - - BUG_ON(mask & ~ab8500_reg_init[i].mask); - return; - } - } - } - - BUG_ON(1); -} - -void mop500_regulator_init(void) -{ - struct regulator_init_data *regulator; - - /* - * Temporarily turn on Vaux2 on 8520 machine - */ - if (cpu_is_u8520()) { - /* Vaux2 initialized to be on */ - ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05); - } - - /* - * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for - * all HREFP_V20 boards) - */ - if (cpu_is_u8500v20()) { - /* VextSupply2RequestCtrl = HP/OFF depending on VxRequest */ - ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01); - - /* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */ - ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2, - 0x20, 0x20); - - /* VextSupply2 = force HP at initialization */ - ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04); - - /* enable VextSupply2 during platform active */ - regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; - regulator->constraints.always_on = 1; - - /* disable VextSupply2 in suspend */ - regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; - regulator->constraints.state_mem.disabled = 1; - regulator->constraints.state_standby.disabled = 1; - - /* enable VextSupply2 HW control (used in suspend) */ - regulator->driver_data = (void *)&ab8500_ext_supply2; - } -} diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h deleted file mode 100644 index 9bece38fe933..000000000000 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * - * Author: Bengt Jonsson for ST-Ericsson - * - * MOP500 board specific initialization for regulators - */ - -#ifndef __BOARD_MOP500_REGULATORS_H -#define __BOARD_MOP500_REGULATORS_H - -#include -#include - -extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data; -extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data; -extern struct regulator_init_data tps61052_regulator; -extern struct regulator_init_data gpio_en_3v3_regulator; - -void mop500_regulator_init(void); - -#endif diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c deleted file mode 100644 index 780bd13cd7e3..000000000000 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2011 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#include -#include -#include - -#include -#include - -#include "db8500-regs.h" -#include "id.h" - -static int __init ux500_l2x0_unlock(void) -{ - int i; - struct device_node *np; - void __iomem *l2x0_base; - - np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); - l2x0_base = of_iomap(np, 0); - of_node_put(np); - if (!l2x0_base) - return -ENODEV; - - /* - * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions - * apparently locks both caches before jumping to the kernel. The - * l2x0 core will not touch the unlock registers if the l2x0 is - * already enabled, so we do it right here instead. The PL310 has - * 8 sets of registers, one per possible CPU. - */ - for (i = 0; i < 8; i++) { - writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + - i * L2X0_LOCKDOWN_STRIDE); - writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + - i * L2X0_LOCKDOWN_STRIDE); - } - iounmap(l2x0_base); - return 0; -} - -static void ux500_l2c310_write_sec(unsigned long val, unsigned reg) -{ - /* - * We can't write to secure registers as we are in non-secure - * mode, until we have some SMI service available. - */ -} - -static int __init ux500_l2x0_init(void) -{ - /* Multiplatform guard */ - if (!((cpu_is_u8500_family() || cpu_is_ux540_family()))) - return -ENODEV; - - /* Unlock before init */ - ux500_l2x0_unlock(); - outer_cache.write_sec = ux500_l2c310_write_sec; - l2x0_of_init(0, ~0); - - return 0; -} -early_initcall(ux500_l2x0_init); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index a557955472ea..46b1da1bf5d2 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -12,41 +12,107 @@ #include #include #include +#include #include #include +#include +#include +#include +#include #include #include -#include -#include #include +#include #include #include #include -#include +#include +#include #include +#include #include "setup.h" -#include "board-mop500-regulators.h" #include "board-mop500.h" #include "db8500-regs.h" -#include "id.h" -static struct ab8500_platform_data ab8500_platdata = { - .regulator = &ab8500_regulator_plat_data, -}; - -static struct prcmu_pdata db8500_prcmu_pdata = { - .ab_platdata = &ab8500_platdata, - .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, - .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, -}; - -static void __init u8500_map_io(void) +static int __init ux500_l2x0_unlock(void) { - debug_ll_io_init(); - ux500_setup_id(); + int i; + struct device_node *np; + void __iomem *l2x0_base; + + np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); + l2x0_base = of_iomap(np, 0); + of_node_put(np); + if (!l2x0_base) + return -ENODEV; + + /* + * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions + * apparently locks both caches before jumping to the kernel. The + * l2x0 core will not touch the unlock registers if the l2x0 is + * already enabled, so we do it right here instead. The PL310 has + * 8 sets of registers, one per possible CPU. + */ + for (i = 0; i < 8; i++) { + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } + iounmap(l2x0_base); + return 0; +} + +static void ux500_l2c310_write_sec(unsigned long val, unsigned reg) +{ + /* + * We can't write to secure registers as we are in non-secure + * mode, until we have some SMI service available. + */ +} + +/* + * FIXME: Should we set up the GPIO domain here? + * + * The problem is that we cannot put the interrupt resources into the platform + * device until the irqdomain has been added. Right now, we set the GIC interrupt + * domain from init_irq(), then load the gpio driver from + * core_initcall(nmk_gpio_init) and add the platform devices from + * arch_initcall(customize_machine). + * + * This feels fragile because it depends on the gpio device getting probed + * _before_ any device uses the gpio interrupts. +*/ +static void __init ux500_init_irq(void) +{ + struct device_node *np; + struct resource r; + + irqchip_init(); + np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu"); + of_address_to_resource(np, 0, &r); + of_node_put(np); + if (!r.start) { + pr_err("could not find PRCMU base resource\n"); + return; + } + prcmu_early_init(r.start, r.end-r.start); + ux500_pm_init(r.start, r.end-r.start); + + /* Unlock before init */ + ux500_l2x0_unlock(); + outer_cache.write_sec = ux500_l2c310_write_sec; +} + +static void ux500_restart(enum reboot_mode mode, const char *cmd) +{ + local_irq_disable(); + local_fiq_disable(); + + prcmu_system_reset(0); } /* @@ -73,31 +139,6 @@ static struct arm_pmu_platdata db8500_pmu_platdata = { .handle_irq = db8500_pmu_handler, }; -static const char *db8500_read_soc_id(void) -{ - void __iomem *uid; - const char *retstr; - - uid = ioremap(U8500_BB_UID_BASE, 0x20); - if (!uid) - return NULL; - /* Throw these device-specific numbers into the entropy pool */ - add_device_randomness(uid, 0x14); - retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", - readl((u32 *)uid+0), - readl((u32 *)uid+1), readl((u32 *)uid+2), - readl((u32 *)uid+3), readl((u32 *)uid+4)); - iounmap(uid); - return retstr; -} - -static struct device * __init db8500_soc_device_init(void) -{ - const char *soc_id = db8500_read_soc_id(); - - return ux500_soc_device_init(soc_id); -} - static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), @@ -111,8 +152,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, "ux500-msp-i2s.3", &msp3_platform_data), /* Requires non-DT:able platform data. */ - OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", - &db8500_prcmu_pdata), + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL), OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL), OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL), OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0", @@ -121,8 +161,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { }; static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", - &db8500_prcmu_pdata), + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL), {}, }; @@ -136,15 +175,13 @@ static const struct of_device_id u8500_local_bus_nodes[] = { static void __init u8500_init_machine(void) { - struct device *parent = db8500_soc_device_init(); - /* automatically probe child nodes of dbx5x0 devices */ if (of_machine_is_compatible("st-ericsson,u8540")) of_platform_populate(NULL, u8500_local_bus_nodes, - u8540_auxdata_lookup, parent); + u8540_auxdata_lookup, NULL); else of_platform_populate(NULL, u8500_local_bus_nodes, - u8500_auxdata_lookup, parent); + u8500_auxdata_lookup, NULL); } static const char * stericsson_dt_platform_compat[] = { @@ -156,10 +193,10 @@ static const char * stericsson_dt_platform_compat[] = { }; DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)") - .map_io = u8500_map_io, + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_irq = ux500_init_irq, .init_machine = u8500_init_machine, - .init_late = NULL, .dt_compat = stericsson_dt_platform_compat, .restart = ux500_restart, MACHINE_END diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c deleted file mode 100644 index 82156cbc22ce..000000000000 --- a/arch/arm/mach-ux500/cpu.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent for ST-Ericsson - * Author: Lee Jones for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "setup.h" - -#include "board-mop500.h" -#include "db8500-regs.h" -#include "id.h" - -void ux500_restart(enum reboot_mode mode, const char *cmd) -{ - local_irq_disable(); - local_fiq_disable(); - - prcmu_system_reset(0); -} - -/* - * FIXME: Should we set up the GPIO domain here? - * - * The problem is that we cannot put the interrupt resources into the platform - * device until the irqdomain has been added. Right now, we set the GIC interrupt - * domain from init_irq(), then load the gpio driver from - * core_initcall(nmk_gpio_init) and add the platform devices from - * arch_initcall(customize_machine). - * - * This feels fragile because it depends on the gpio device getting probed - * _before_ any device uses the gpio interrupts. -*/ -void __init ux500_init_irq(void) -{ - struct device_node *np; - struct resource r; - - irqchip_init(); - np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu"); - of_address_to_resource(np, 0, &r); - of_node_put(np); - if (!r.start) { - pr_err("could not find PRCMU base resource\n"); - return; - } - prcmu_early_init(r.start, r.end-r.start); - ux500_pm_init(r.start, r.end-r.start); - - /* - * Init clocks here so that they are available for system timer - * initialization. - */ - if (cpu_is_u8500_family()) - u8500_clk_init(); - else if (cpu_is_u9540()) - u9540_clk_init(); - else if (cpu_is_u8540()) - u8540_clk_init(); -} - -static const char * __init ux500_get_machine(void) -{ - return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber()); -} - -static const char * __init ux500_get_family(void) -{ - return kasprintf(GFP_KERNEL, "ux500"); -} - -static const char * __init ux500_get_revision(void) -{ - unsigned int rev = dbx500_revision(); - - if (rev == 0x01) - return kasprintf(GFP_KERNEL, "%s", "ED"); - else if (rev >= 0xA0) - return kasprintf(GFP_KERNEL, "%d.%d", - (rev >> 4) - 0xA + 1, rev & 0xf); - - return kasprintf(GFP_KERNEL, "%s", "Unknown"); -} - -static ssize_t ux500_get_process(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - if (dbx500_id.process == 0x00) - return sprintf(buf, "Standard\n"); - - return sprintf(buf, "%02xnm\n", dbx500_id.process); -} - -static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr, - const char *soc_id) -{ - soc_dev_attr->soc_id = soc_id; - soc_dev_attr->machine = ux500_get_machine(); - soc_dev_attr->family = ux500_get_family(); - soc_dev_attr->revision = ux500_get_revision(); -} - -static const struct device_attribute ux500_soc_attr = - __ATTR(process, S_IRUGO, ux500_get_process, NULL); - -struct device * __init ux500_soc_device_init(const char *soc_id) -{ - struct device *parent; - struct soc_device *soc_dev; - struct soc_device_attribute *soc_dev_attr; - - soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); - if (!soc_dev_attr) - return ERR_PTR(-ENOMEM); - - soc_info_populate(soc_dev_attr, soc_id); - - soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR(soc_dev)) { - kfree(soc_dev_attr); - return NULL; - } - - parent = soc_device_to_device(soc_dev); - device_create_file(parent, &ux500_soc_attr); - - return parent; -} diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c deleted file mode 100644 index 1e81e990044b..000000000000 --- a/arch/arm/mach-ux500/id.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include -#include -#include - -#include -#include -#include -#include - -#include "setup.h" - -#include "db8500-regs.h" -#include "id.h" - -struct dbx500_asic_id dbx500_id; - -static unsigned int __init ux500_read_asicid(phys_addr_t addr) -{ - phys_addr_t base = addr & ~0xfff; - struct map_desc desc = { - .virtual = (unsigned long)UX500_VIRT_ROM, - .pfn = __phys_to_pfn(base), - .length = SZ_16K, - .type = MT_DEVICE, - }; - - iotable_init(&desc, 1); - - /* As in devicemaps_init() */ - local_flush_tlb_all(); - flush_cache_all(); - - return readl(UX500_VIRT_ROM + (addr & 0xfff)); -} - -static void ux500_print_soc_info(unsigned int asicid) -{ - unsigned int rev = dbx500_revision(); - - pr_info("DB%4x ", dbx500_partnumber()); - - if (rev == 0x01) - pr_cont("Early Drop"); - else if (rev >= 0xA0) - pr_cont("v%d.%d" , (rev >> 4) - 0xA + 1, rev & 0xf); - else - pr_cont("Unknown"); - - pr_cont(" [%#010x]\n", asicid); -} - -static unsigned int partnumber(unsigned int asicid) -{ - return (asicid >> 8) & 0xffff; -} - -/* - * SOC MIDR ASICID ADDRESS ASICID VALUE - * DB8500ed 0x410fc090 0x9001FFF4 0x00850001 - * DB8500v1 0x411fc091 0x9001FFF4 0x008500A0 - * DB8500v1.1 0x411fc091 0x9001FFF4 0x008500A1 - * DB8500v2 0x412fc091 0x9001DBF4 0x008500B0 - * DB8520v2.2 0x412fc091 0x9001DBF4 0x008500B2 - * DB5500v1 0x412fc091 0x9001FFF4 0x005500A0 - * DB9540 0x413fc090 0xFFFFDBF4 0x009540xx - */ - -void __init ux500_setup_id(void) -{ - unsigned int cpuid = read_cpuid_id(); - unsigned int asicid = 0; - phys_addr_t addr = 0; - - switch (cpuid) { - case 0x410fc090: /* DB8500ed */ - case 0x411fc091: /* DB8500v1 */ - addr = 0x9001FFF4; - break; - - case 0x412fc091: /* DB8520 / DB8500v2 / DB5500v1 */ - asicid = ux500_read_asicid(0x9001DBF4); - if (partnumber(asicid) == 0x8500 || - partnumber(asicid) == 0x8520) - /* DB8500v2 */ - break; - - /* DB5500v1 */ - addr = 0x9001FFF4; - break; - - case 0x413fc090: /* DB9540 */ - addr = 0xFFFFDBF4; - break; - } - - if (addr) - asicid = ux500_read_asicid(addr); - - if (!asicid) { - pr_err("Unable to identify SoC\n"); - ux500_unknown_soc(); - } - - dbx500_id.process = asicid >> 24; - dbx500_id.partnumber = partnumber(asicid); - dbx500_id.revision = asicid & 0xff; - - ux500_print_soc_info(asicid); -} diff --git a/arch/arm/mach-ux500/id.h b/arch/arm/mach-ux500/id.h deleted file mode 100644 index bcc58a8cccbc..000000000000 --- a/arch/arm/mach-ux500/id.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_UX500_ID -#define __MACH_UX500_ID - -/** - * struct dbx500_asic_id - fields of the ASIC ID - * @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard" - * @partnumber: hithereto 0x8500 for DB8500 - * @revision: version code in the series - */ -struct dbx500_asic_id { - u16 partnumber; - u8 revision; - u8 process; -}; - -extern struct dbx500_asic_id dbx500_id; - -static inline unsigned int __attribute_const__ dbx500_partnumber(void) -{ - return dbx500_id.partnumber; -} - -static inline unsigned int __attribute_const__ dbx500_revision(void) -{ - return dbx500_id.revision; -} - -/* - * SOCs - */ - -static inline bool __attribute_const__ cpu_is_u8500(void) -{ - return dbx500_partnumber() == 0x8500; -} - -static inline bool __attribute_const__ cpu_is_u8520(void) -{ - return dbx500_partnumber() == 0x8520; -} - -static inline bool cpu_is_u8500_family(void) -{ - return cpu_is_u8500() || cpu_is_u8520(); -} - -static inline bool __attribute_const__ cpu_is_u9540(void) -{ - return dbx500_partnumber() == 0x9540; -} - -static inline bool __attribute_const__ cpu_is_u8540(void) -{ - return dbx500_partnumber() == 0x8540; -} - -static inline bool __attribute_const__ cpu_is_u8580(void) -{ - return dbx500_partnumber() == 0x8580; -} - -static inline bool cpu_is_ux540_family(void) -{ - return cpu_is_u9540() || cpu_is_u8540() || cpu_is_u8580(); -} - -/* - * 8500 revisions - */ - -static inline bool __attribute_const__ cpu_is_u8500ed(void) -{ - return cpu_is_u8500() && dbx500_revision() == 0x00; -} - -static inline bool __attribute_const__ cpu_is_u8500v1(void) -{ - return cpu_is_u8500() && (dbx500_revision() & 0xf0) == 0xA0; -} - -static inline bool __attribute_const__ cpu_is_u8500v10(void) -{ - return cpu_is_u8500() && dbx500_revision() == 0xA0; -} - -static inline bool __attribute_const__ cpu_is_u8500v11(void) -{ - return cpu_is_u8500() && dbx500_revision() == 0xA1; -} - -static inline bool __attribute_const__ cpu_is_u8500v2(void) -{ - return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0); -} - -static inline bool cpu_is_u8500v20(void) -{ - return cpu_is_u8500() && (dbx500_revision() == 0xB0); -} - -static inline bool cpu_is_u8500v21(void) -{ - return cpu_is_u8500() && (dbx500_revision() == 0xB1); -} - -static inline bool cpu_is_u8500v22(void) -{ - return cpu_is_u8500() && (dbx500_revision() == 0xB2); -} - -static inline bool cpu_is_u8500v20_or_later(void) -{ - return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11()); -} - -/* - * 8540 revisions - */ - -static inline bool __attribute_const__ cpu_is_u8540v10(void) -{ - return cpu_is_u8540() && dbx500_revision() == 0xA0; -} - -static inline bool __attribute_const__ cpu_is_u8580v10(void) -{ - return cpu_is_u8580() && dbx500_revision() == 0xA0; -} - -static inline bool ux500_is_svp(void) -{ - return false; -} - -#define ux500_unknown_soc() BUG() - -#endif diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 88b8ab4f300c..8f2f615ff958 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -26,7 +26,6 @@ #include "setup.h" #include "db8500-regs.h" -#include "id.h" /* Magic triggers in backup RAM */ #define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4 diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index c704254ab67c..988e7c77068d 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -11,18 +11,6 @@ #ifndef __ASM_ARCH_SETUP_H #define __ASM_ARCH_SETUP_H -#include -#include -#include - -void ux500_restart(enum reboot_mode mode, const char *cmd); - -void __init ux500_setup_id(void); - -extern void __init ux500_init_irq(void); - -extern struct device *ux500_soc_device_init(const char *soc_id); - extern void ux500_cpu_die(unsigned int cpu); #endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 189d21541f9c..c19b82799a34 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -5,6 +5,7 @@ */ #include +#include #include #include #include @@ -252,6 +253,7 @@ compatible = "hisilicon,hi6220-mediactrl", "syscon"; reg = <0x0 0xf4410000 0x0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; pm_ctrl: pm_ctrl@f7032000 { diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index c5a7de9bc783..3b205e212337 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -132,6 +132,19 @@ config SUNXI_RSB with various RSB based devices, such as AXP223, AXP8XX PMICs, and AC100/AC200 ICs. +# TODO: This uses pm_clk_*() symbols that aren't exported in v4.7 and hence +# the driver will fail to build as a module. However there are patches to +# address that queued for v4.8, so this can be turned into a tristate symbol +# after v4.8-rc1. +config TEGRA_ACONNECT + bool "Tegra ACONNECT Bus Driver" + depends on ARCH_TEGRA_210_SOC + depends on OF && PM + select PM_CLK + help + Driver for the Tegra ACONNECT bus which is used to interface with + the devices inside the Audio Processing Engine (APE) for Tegra210. + config UNIPHIER_SYSTEM_BUS tristate "UniPhier System Bus driver" depends on ARCH_UNIPHIER && OF diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index ccff007ee7e8..ac84cc4348e3 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -17,5 +17,6 @@ obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o +obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o diff --git a/drivers/bus/tegra-aconnect.c b/drivers/bus/tegra-aconnect.c new file mode 100644 index 000000000000..7e4104b74fa8 --- /dev/null +++ b/drivers/bus/tegra-aconnect.c @@ -0,0 +1,112 @@ +/* + * Tegra ACONNECT Bus Driver + * + * Copyright (C) 2016, NVIDIA CORPORATION. All rights reserved. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include + +static int tegra_aconnect_add_clock(struct device *dev, char *name) +{ + struct clk *clk; + int ret; + + clk = clk_get(dev, name); + if (IS_ERR(clk)) { + dev_err(dev, "%s clock not found\n", name); + return PTR_ERR(clk); + } + + ret = pm_clk_add_clk(dev, clk); + if (ret) + clk_put(clk); + + return ret; +} + +static int tegra_aconnect_probe(struct platform_device *pdev) +{ + int ret; + + if (!pdev->dev.of_node) + return -EINVAL; + + ret = pm_clk_create(&pdev->dev); + if (ret) + return ret; + + ret = tegra_aconnect_add_clock(&pdev->dev, "ape"); + if (ret) + goto clk_destroy; + + ret = tegra_aconnect_add_clock(&pdev->dev, "apb2ape"); + if (ret) + goto clk_destroy; + + pm_runtime_enable(&pdev->dev); + + of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); + + dev_info(&pdev->dev, "Tegra ACONNECT bus registered\n"); + + return 0; + +clk_destroy: + pm_clk_destroy(&pdev->dev); + + return ret; +} + +static int tegra_aconnect_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + pm_clk_destroy(&pdev->dev); + + return 0; +} + +static int tegra_aconnect_runtime_resume(struct device *dev) +{ + return pm_clk_resume(dev); +} + +static int tegra_aconnect_runtime_suspend(struct device *dev) +{ + return pm_clk_suspend(dev); +} + +static const struct dev_pm_ops tegra_aconnect_pm_ops = { + SET_RUNTIME_PM_OPS(tegra_aconnect_runtime_suspend, + tegra_aconnect_runtime_resume, NULL) +}; + +static const struct of_device_id tegra_aconnect_of_match[] = { + { .compatible = "nvidia,tegra210-aconnect", }, + { } +}; +MODULE_DEVICE_TABLE(of, tegra_aconnect_of_match); + +static struct platform_driver tegra_aconnect_driver = { + .probe = tegra_aconnect_probe, + .remove = tegra_aconnect_remove, + .driver = { + .name = "tegra-aconnect", + .of_match_table = tegra_aconnect_of_match, + .pm = &tegra_aconnect_pm_ops, + }, +}; +module_platform_driver(tegra_aconnect_driver); + +MODULE_DESCRIPTION("NVIDIA Tegra ACONNECT Bus Driver"); +MODULE_AUTHOR("Jon Hunter "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/clk-clps711x.c b/drivers/clk/clk-clps711x.c index 1f60b02416a7..adaf109f2fe2 100644 --- a/drivers/clk/clk-clps711x.c +++ b/drivers/clk/clk-clps711x.c @@ -184,5 +184,5 @@ static void __init clps711x_clk_init_dt(struct device_node *np) of_clk_add_provider(np, of_clk_src_onecell_get, &clps711x_clk->clk_data); } -CLK_OF_DECLARE(clps711x, "cirrus,clps711x-clk", clps711x_clk_init_dt); +CLK_OF_DECLARE(clps711x, "cirrus,ep7209-clk", clps711x_clk_init_dt); #endif diff --git a/drivers/clk/ux500/u8500_of_clk.c b/drivers/clk/ux500/u8500_of_clk.c index 9a736d939806..e960d686d9db 100644 --- a/drivers/clk/ux500/u8500_of_clk.c +++ b/drivers/clk/ux500/u8500_of_clk.c @@ -11,7 +11,6 @@ #include #include #include -#include #include "clk.h" #define PRCC_NUM_PERIPH_CLUSTERS 6 @@ -48,11 +47,6 @@ static struct clk *ux500_twocell_get(struct of_phandle_args *clkspec, return PRCC_SHOW(clk_data, base, bit); } -static const struct of_device_id u8500_clk_of_match[] = { - { .compatible = "stericsson,u8500-clks", }, - { }, -}; - /* CLKRST4 is missing making it hard to index things */ enum clkrst_index { CLKRST1_INDEX = 0, @@ -63,22 +57,15 @@ enum clkrst_index { CLKRST_MAX, }; -void u8500_clk_init(void) +static void u8500_clk_init(struct device_node *np) { struct prcmu_fw_version *fw_version; - struct device_node *np = NULL; struct device_node *child = NULL; const char *sgaclk_parent = NULL; struct clk *clk, *rtc_clk, *twd_clk; u32 bases[CLKRST_MAX]; int i; - if (of_have_populated_dt()) - np = of_find_matching_node(NULL, u8500_clk_of_match); - if (!np) { - pr_err("Either DT or U8500 Clock node not found\n"); - return; - } for (i = 0; i < ARRAY_SIZE(bases); i++) { struct resource r; @@ -573,3 +560,4 @@ void u8500_clk_init(void) of_clk_add_provider(child, of_clk_src_simple_get, twd_clk); } } +CLK_OF_DECLARE(u8500_clks, "stericsson,u8500-clks", u8500_clk_init); diff --git a/drivers/clk/ux500/u8540_clk.c b/drivers/clk/ux500/u8540_clk.c index 86549e59fb42..133859f0e2bf 100644 --- a/drivers/clk/ux500/u8540_clk.c +++ b/drivers/clk/ux500/u8540_clk.c @@ -12,14 +12,8 @@ #include #include #include -#include #include "clk.h" -static const struct of_device_id u8540_clk_of_match[] = { - { .compatible = "stericsson,u8540-clks", }, - { } -}; - /* CLKRST4 is missing making it hard to index things */ enum clkrst_index { CLKRST1_INDEX = 0, @@ -30,19 +24,12 @@ enum clkrst_index { CLKRST_MAX, }; -void u8540_clk_init(void) +static void u8540_clk_init(struct device_node *np) { struct clk *clk; - struct device_node *np = NULL; u32 bases[CLKRST_MAX]; int i; - if (of_have_populated_dt()) - np = of_find_matching_node(NULL, u8540_clk_of_match); - if (!np) { - pr_err("Either DT or U8540 Clock node not found\n"); - return; - } for (i = 0; i < ARRAY_SIZE(bases); i++) { struct resource r; @@ -607,3 +594,4 @@ void u8540_clk_init(void) bases[CLKRST6_INDEX], BIT(0), CLK_SET_RATE_GATE); clk_register_clkdev(clk, NULL, "rng"); } +CLK_OF_DECLARE(u8540_clks, "stericsson,u8540-clks", u8540_clk_init); diff --git a/drivers/clk/ux500/u9540_clk.c b/drivers/clk/ux500/u9540_clk.c index 2138a4c8cbca..7b6bca49ce42 100644 --- a/drivers/clk/ux500/u9540_clk.c +++ b/drivers/clk/ux500/u9540_clk.c @@ -9,10 +9,10 @@ #include #include -#include #include "clk.h" -void u9540_clk_init(void) +static void u9540_clk_init(struct device_node *np) { /* register clocks here */ } +CLK_OF_DECLARE(u9540_clks, "stericsson,u9540-clks", u9540_clk_init); diff --git a/drivers/clocksource/clps711x-timer.c b/drivers/clocksource/clps711x-timer.c index 84aed78261e4..24db6d605549 100644 --- a/drivers/clocksource/clps711x-timer.c +++ b/drivers/clocksource/clps711x-timer.c @@ -119,5 +119,5 @@ static int __init clps711x_timer_init(struct device_node *np) return -EINVAL; } } -CLOCKSOURCE_OF_DECLARE(clps711x, "cirrus,clps711x-timer", clps711x_timer_init); +CLOCKSOURCE_OF_DECLARE(clps711x, "cirrus,ep7209-timer", clps711x_timer_init); #endif diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c index 9e07588ea9f5..f82074eea779 100644 --- a/drivers/cpufreq/s5pv210-cpufreq.c +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -220,7 +220,7 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) tmp1 /= tmp; - __raw_writel(tmp1, reg); + writel_relaxed(tmp1, reg); } static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) @@ -296,29 +296,29 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) * 1. Temporary Change divider for MFC and G3D * SCLKA2M(200/1=200)->(200/4=50)Mhz */ - reg = __raw_readl(S5P_CLK_DIV2); + reg = readl_relaxed(S5P_CLK_DIV2); reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) | (3 << S5P_CLKDIV2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_DIV2); + writel_relaxed(reg, S5P_CLK_DIV2); /* For MFC, G3D dividing */ do { - reg = __raw_readl(S5P_CLKDIV_STAT0); + reg = readl_relaxed(S5P_CLKDIV_STAT0); } while (reg & ((1 << 16) | (1 << 17))); /* * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX * (200/4=50)->(667/4=166)Mhz */ - reg = __raw_readl(S5P_CLK_SRC2); + reg = readl_relaxed(S5P_CLK_SRC2); reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) | (1 << S5P_CLKSRC2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_SRC2); + writel_relaxed(reg, S5P_CLK_SRC2); do { - reg = __raw_readl(S5P_CLKMUX_STAT1); + reg = readl_relaxed(S5P_CLKMUX_STAT1); } while (reg & ((1 << 7) | (1 << 3))); /* @@ -330,19 +330,19 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) s5pv210_set_refresh(DMC1, 133000); /* 4. SCLKAPLL -> SCLKMPLL */ - reg = __raw_readl(S5P_CLK_SRC0); + reg = readl_relaxed(S5P_CLK_SRC0); reg &= ~(S5P_CLKSRC0_MUX200_MASK); reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT); - __raw_writel(reg, S5P_CLK_SRC0); + writel_relaxed(reg, S5P_CLK_SRC0); do { - reg = __raw_readl(S5P_CLKMUX_STAT0); + reg = readl_relaxed(S5P_CLKMUX_STAT0); } while (reg & (0x1 << 18)); } /* Change divider */ - reg = __raw_readl(S5P_CLK_DIV0); + reg = readl_relaxed(S5P_CLK_DIV0); reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK | S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK | @@ -358,25 +358,25 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) (clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) | (clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT)); - __raw_writel(reg, S5P_CLK_DIV0); + writel_relaxed(reg, S5P_CLK_DIV0); do { - reg = __raw_readl(S5P_CLKDIV_STAT0); + reg = readl_relaxed(S5P_CLKDIV_STAT0); } while (reg & 0xff); /* ARM MCS value changed */ - reg = __raw_readl(S5P_ARM_MCS_CON); + reg = readl_relaxed(S5P_ARM_MCS_CON); reg &= ~0x3; if (index >= L3) reg |= 0x3; else reg |= 0x1; - __raw_writel(reg, S5P_ARM_MCS_CON); + writel_relaxed(reg, S5P_ARM_MCS_CON); if (pll_changing) { /* 5. Set Lock time = 30us*24Mhz = 0x2cf */ - __raw_writel(0x2cf, S5P_APLL_LOCK); + writel_relaxed(0x2cf, S5P_APLL_LOCK); /* * 6. Turn on APLL @@ -384,12 +384,12 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) * 6-2. Wait untile the PLL is locked */ if (index == L0) - __raw_writel(APLL_VAL_1000, S5P_APLL_CON); + writel_relaxed(APLL_VAL_1000, S5P_APLL_CON); else - __raw_writel(APLL_VAL_800, S5P_APLL_CON); + writel_relaxed(APLL_VAL_800, S5P_APLL_CON); do { - reg = __raw_readl(S5P_APLL_CON); + reg = readl_relaxed(S5P_APLL_CON); } while (!(reg & (0x1 << 29))); /* @@ -397,39 +397,39 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX * (667/4=166)->(200/4=50)Mhz */ - reg = __raw_readl(S5P_CLK_SRC2); + reg = readl_relaxed(S5P_CLK_SRC2); reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) | (0 << S5P_CLKSRC2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_SRC2); + writel_relaxed(reg, S5P_CLK_SRC2); do { - reg = __raw_readl(S5P_CLKMUX_STAT1); + reg = readl_relaxed(S5P_CLKMUX_STAT1); } while (reg & ((1 << 7) | (1 << 3))); /* * 8. Change divider for MFC and G3D * (200/4=50)->(200/1=200)Mhz */ - reg = __raw_readl(S5P_CLK_DIV2); + reg = readl_relaxed(S5P_CLK_DIV2); reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) | (clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_DIV2); + writel_relaxed(reg, S5P_CLK_DIV2); /* For MFC, G3D dividing */ do { - reg = __raw_readl(S5P_CLKDIV_STAT0); + reg = readl_relaxed(S5P_CLKDIV_STAT0); } while (reg & ((1 << 16) | (1 << 17))); /* 9. Change MPLL to APLL in MSYS_MUX */ - reg = __raw_readl(S5P_CLK_SRC0); + reg = readl_relaxed(S5P_CLK_SRC0); reg &= ~(S5P_CLKSRC0_MUX200_MASK); reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT); - __raw_writel(reg, S5P_CLK_SRC0); + writel_relaxed(reg, S5P_CLK_SRC0); do { - reg = __raw_readl(S5P_CLKMUX_STAT0); + reg = readl_relaxed(S5P_CLKMUX_STAT0); } while (reg & (0x1 << 18)); /* @@ -446,13 +446,13 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) * and memory refresh parameter should be changed */ if (bus_speed_changing) { - reg = __raw_readl(S5P_CLK_DIV6); + reg = readl_relaxed(S5P_CLK_DIV6); reg &= ~S5P_CLKDIV6_ONEDRAM_MASK; reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT); - __raw_writel(reg, S5P_CLK_DIV6); + writel_relaxed(reg, S5P_CLK_DIV6); do { - reg = __raw_readl(S5P_CLKDIV_STAT1); + reg = readl_relaxed(S5P_CLKDIV_STAT1); } while (reg & (1 << 15)); /* Reconfigure DRAM refresh counter value */ @@ -492,7 +492,7 @@ static int check_mem_type(void __iomem *dmc_reg) { unsigned long val; - val = __raw_readl(dmc_reg + 0x4); + val = readl_relaxed(dmc_reg + 0x4); val = (val & (0xf << 8)); return val >> 8; @@ -537,10 +537,10 @@ static int s5pv210_cpu_init(struct cpufreq_policy *policy) } /* Find current refresh counter and frequency each DMC */ - s5pv210_dram_conf[0].refresh = (__raw_readl(dmc_base[0] + 0x30) * 1000); + s5pv210_dram_conf[0].refresh = (readl_relaxed(dmc_base[0] + 0x30) * 1000); s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk); - s5pv210_dram_conf[1].refresh = (__raw_readl(dmc_base[1] + 0x30) * 1000); + s5pv210_dram_conf[1].refresh = (readl_relaxed(dmc_base[1] + 0x30) * 1000); s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk); policy->suspend_freq = SLEEP_FREQ; diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 6664f1108c7c..0e22f241403b 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -10,7 +10,7 @@ config ARM_PSCI_FW config ARM_SCPI_PROTOCOL tristate "ARM System Control and Power Interface (SCPI) Message Protocol" - depends on ARM_MHU + depends on MAILBOX help System Control and Power Interface (SCPI) Message Protocol is defined for the purpose of communication between the Application @@ -27,6 +27,15 @@ config ARM_SCPI_PROTOCOL This protocol library provides interface for all the client drivers making use of the features offered by the SCP. +config ARM_SCPI_POWER_DOMAIN + tristate "SCPI power domain driver" + depends on ARM_SCPI_PROTOCOL || (COMPILE_TEST && OF) + default y + select PM_GENERIC_DOMAINS if PM + help + This enables support for the SCPI power domains which can be + enabled or disabled via the SCP firmware + config EDD tristate "BIOS Enhanced Disk Drive calls determine boot disk" depends on X86 @@ -184,6 +193,7 @@ config FW_CFG_SYSFS_CMDLINE config QCOM_SCM bool depends on ARM || ARM64 + select RESET_CONTROLLER config QCOM_SCM_32 def_bool y diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 474bada56fcd..44a59dcfc398 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_ARM_PSCI_FW) += psci.o obj-$(CONFIG_ARM_SCPI_PROTOCOL) += arm_scpi.o +obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pm_domain.o obj-$(CONFIG_DMI) += dmi_scan.o obj-$(CONFIG_DMI_SYSFS) += dmi-sysfs.o obj-$(CONFIG_EDD) += edd.o diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c index 7e3e595c9f30..438893762076 100644 --- a/drivers/firmware/arm_scpi.c +++ b/drivers/firmware/arm_scpi.c @@ -210,10 +210,6 @@ struct dvfs_info { } opps[MAX_DVFS_OPPS]; } __packed; -struct dvfs_get { - u8 index; -} __packed; - struct dvfs_set { u8 domain; u8 index; @@ -235,6 +231,11 @@ struct sensor_value { __le32 hi_val; } __packed; +struct dev_pstate_set { + u16 dev_id; + u8 pstate; +} __packed; + static struct scpi_drvinfo *scpi_info; static int scpi_linux_errmap[SCPI_ERR_MAX] = { @@ -431,11 +432,11 @@ static int scpi_clk_set_val(u16 clk_id, unsigned long rate) static int scpi_dvfs_get_idx(u8 domain) { int ret; - struct dvfs_get dvfs; + u8 dvfs_idx; ret = scpi_send_message(SCPI_CMD_GET_DVFS, &domain, sizeof(domain), - &dvfs, sizeof(dvfs)); - return ret ? ret : dvfs.index; + &dvfs_idx, sizeof(dvfs_idx)); + return ret ? ret : dvfs_idx; } static int scpi_dvfs_set_idx(u8 domain, u8 index) @@ -526,7 +527,7 @@ static int scpi_sensor_get_info(u16 sensor_id, struct scpi_sensor_info *info) return ret; } -int scpi_sensor_get_value(u16 sensor, u64 *val) +static int scpi_sensor_get_value(u16 sensor, u64 *val) { __le16 id = cpu_to_le16(sensor); struct sensor_value buf; @@ -541,6 +542,29 @@ int scpi_sensor_get_value(u16 sensor, u64 *val) return ret; } +static int scpi_device_get_power_state(u16 dev_id) +{ + int ret; + u8 pstate; + __le16 id = cpu_to_le16(dev_id); + + ret = scpi_send_message(SCPI_CMD_GET_DEVICE_PWR_STATE, &id, + sizeof(id), &pstate, sizeof(pstate)); + return ret ? ret : pstate; +} + +static int scpi_device_set_power_state(u16 dev_id, u8 pstate) +{ + int stat; + struct dev_pstate_set dev_set = { + .dev_id = cpu_to_le16(dev_id), + .pstate = pstate, + }; + + return scpi_send_message(SCPI_CMD_SET_DEVICE_PWR_STATE, &dev_set, + sizeof(dev_set), &stat, sizeof(stat)); +} + static struct scpi_ops scpi_ops = { .get_version = scpi_get_version, .clk_get_range = scpi_clk_get_range, @@ -552,6 +576,8 @@ static struct scpi_ops scpi_ops = { .sensor_get_capability = scpi_sensor_get_capability, .sensor_get_info = scpi_sensor_get_info, .sensor_get_value = scpi_sensor_get_value, + .device_get_power_state = scpi_device_get_power_state, + .device_set_power_state = scpi_device_set_power_state, }; struct scpi_ops *get_scpi_ops(void) diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c index 0883292f640f..c6aeedbdcbb0 100644 --- a/drivers/firmware/qcom_scm-32.c +++ b/drivers/firmware/qcom_scm-32.c @@ -23,8 +23,7 @@ #include #include #include - -#include +#include #include "qcom_scm.h" @@ -96,44 +95,6 @@ struct qcom_scm_response { __le32 is_complete; }; -/** - * alloc_qcom_scm_command() - Allocate an SCM command - * @cmd_size: size of the command buffer - * @resp_size: size of the response buffer - * - * Allocate an SCM command, including enough room for the command - * and response headers as well as the command and response buffers. - * - * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails. - */ -static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size) -{ - struct qcom_scm_command *cmd; - size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size + - resp_size; - u32 offset; - - cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL); - if (cmd) { - cmd->len = cpu_to_le32(len); - offset = offsetof(struct qcom_scm_command, buf); - cmd->buf_offset = cpu_to_le32(offset); - cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size); - } - return cmd; -} - -/** - * free_qcom_scm_command() - Free an SCM command - * @cmd: command to free - * - * Free an SCM command. - */ -static inline void free_qcom_scm_command(struct qcom_scm_command *cmd) -{ - kfree(cmd); -} - /** * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response * @cmd: command @@ -168,23 +129,6 @@ static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response return (void *)rsp + le32_to_cpu(rsp->buf_offset); } -static int qcom_scm_remap_error(int err) -{ - pr_err("qcom_scm_call failed with error code %d\n", err); - switch (err) { - case QCOM_SCM_ERROR: - return -EIO; - case QCOM_SCM_EINVAL_ADDR: - case QCOM_SCM_EINVAL_ARG: - return -EINVAL; - case QCOM_SCM_EOPNOTSUPP: - return -EOPNOTSUPP; - case QCOM_SCM_ENOMEM: - return -ENOMEM; - } - return -EINVAL; -} - static u32 smc(u32 cmd_addr) { int context_id; @@ -209,45 +153,9 @@ static u32 smc(u32 cmd_addr) return r0; } -static int __qcom_scm_call(const struct qcom_scm_command *cmd) -{ - int ret; - u32 cmd_addr = virt_to_phys(cmd); - - /* - * Flush the command buffer so that the secure world sees - * the correct data. - */ - secure_flush_area(cmd, cmd->len); - - ret = smc(cmd_addr); - if (ret < 0) - ret = qcom_scm_remap_error(ret); - - return ret; -} - -static void qcom_scm_inv_range(unsigned long start, unsigned long end) -{ - u32 cacheline_size, ctr; - - asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr)); - cacheline_size = 4 << ((ctr >> 16) & 0xf); - - start = round_down(start, cacheline_size); - end = round_up(end, cacheline_size); - outer_inv_range(start, end); - while (start < end) { - asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) - : "memory"); - start += cacheline_size; - } - dsb(); - isb(); -} - /** * qcom_scm_call() - Send an SCM command + * @dev: struct device * @svc_id: service identifier * @cmd_id: command identifier * @cmd_buf: command buffer @@ -264,42 +172,59 @@ static void qcom_scm_inv_range(unsigned long start, unsigned long end) * and response buffers is taken care of by qcom_scm_call; however, callers are * responsible for any other cached buffers passed over to the secure world. */ -static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, - size_t cmd_len, void *resp_buf, size_t resp_len) +static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id, + const void *cmd_buf, size_t cmd_len, void *resp_buf, + size_t resp_len) { int ret; struct qcom_scm_command *cmd; struct qcom_scm_response *rsp; - unsigned long start, end; + size_t alloc_len = sizeof(*cmd) + cmd_len + sizeof(*rsp) + resp_len; + dma_addr_t cmd_phys; - cmd = alloc_qcom_scm_command(cmd_len, resp_len); + cmd = kzalloc(PAGE_ALIGN(alloc_len), GFP_KERNEL); if (!cmd) return -ENOMEM; + cmd->len = cpu_to_le32(alloc_len); + cmd->buf_offset = cpu_to_le32(sizeof(*cmd)); + cmd->resp_hdr_offset = cpu_to_le32(sizeof(*cmd) + cmd_len); + cmd->id = cpu_to_le32((svc_id << 10) | cmd_id); if (cmd_buf) memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len); + rsp = qcom_scm_command_to_response(cmd); + + cmd_phys = dma_map_single(dev, cmd, alloc_len, DMA_TO_DEVICE); + if (dma_mapping_error(dev, cmd_phys)) { + kfree(cmd); + return -ENOMEM; + } + mutex_lock(&qcom_scm_lock); - ret = __qcom_scm_call(cmd); + ret = smc(cmd_phys); + if (ret < 0) + ret = qcom_scm_remap_error(ret); mutex_unlock(&qcom_scm_lock); if (ret) goto out; - rsp = qcom_scm_command_to_response(cmd); - start = (unsigned long)rsp; - do { - qcom_scm_inv_range(start, start + sizeof(*rsp)); + dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len, + sizeof(*rsp), DMA_FROM_DEVICE); } while (!rsp->is_complete); - end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len; - qcom_scm_inv_range(start, end); - - if (resp_buf) - memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len); + if (resp_buf) { + dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len + + le32_to_cpu(rsp->buf_offset), + resp_len, DMA_FROM_DEVICE); + memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), + resp_len); + } out: - free_qcom_scm_command(cmd); + dma_unmap_single(dev, cmd_phys, alloc_len, DMA_TO_DEVICE); + kfree(cmd); return ret; } @@ -342,6 +267,41 @@ static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1) return r0; } +/** + * qcom_scm_call_atomic2() - Send an atomic SCM command with two arguments + * @svc_id: service identifier + * @cmd_id: command identifier + * @arg1: first argument + * @arg2: second argument + * + * This shall only be used with commands that are guaranteed to be + * uninterruptable, atomic and SMP safe. + */ +static s32 qcom_scm_call_atomic2(u32 svc, u32 cmd, u32 arg1, u32 arg2) +{ + int context_id; + + register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 2); + register u32 r1 asm("r1") = (u32)&context_id; + register u32 r2 asm("r2") = arg1; + register u32 r3 asm("r3") = arg2; + + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r0") + __asmeq("%2", "r1") + __asmeq("%3", "r2") + __asmeq("%4", "r3") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + "smc #0 @ switch to secure world\n" + : "=r" (r0) + : "r" (r0), "r" (r1), "r" (r2), "r" (r3) + ); + return r0; +} + u32 qcom_scm_get_version(void) { int context_id; @@ -378,22 +338,6 @@ u32 qcom_scm_get_version(void) } EXPORT_SYMBOL(qcom_scm_get_version); -/* - * Set the cold/warm boot address for one of the CPU cores. - */ -static int qcom_scm_set_boot_addr(u32 addr, int flags) -{ - struct { - __le32 flags; - __le32 addr; - } cmd; - - cmd.addr = cpu_to_le32(addr); - cmd.flags = cpu_to_le32(flags); - return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR, - &cmd, sizeof(cmd), NULL, 0); -} - /** * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus * @entry: Entry point function for the cpus @@ -423,7 +367,8 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus) set_cpu_present(cpu, false); } - return qcom_scm_set_boot_addr(virt_to_phys(entry), flags); + return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR, + flags, virt_to_phys(entry)); } /** @@ -434,11 +379,16 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus) * Set the Linux entry point for the SCM to transfer control to when coming * out of a power down. CPU power down may be executed on cpuidle or hotplug. */ -int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus) +int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry, + const cpumask_t *cpus) { int ret; int flags = 0; int cpu; + struct { + __le32 flags; + __le32 addr; + } cmd; /* * Reassign only if we are switching from hotplug entry point @@ -454,7 +404,10 @@ int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus) if (!flags) return 0; - ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags); + cmd.addr = cpu_to_le32(virt_to_phys(entry)); + cmd.flags = cpu_to_le32(flags); + ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR, + &cmd, sizeof(cmd), NULL, 0); if (!ret) { for_each_cpu(cpu, cpus) qcom_scm_wb[cpu].entry = entry; @@ -477,25 +430,133 @@ void __qcom_scm_cpu_power_down(u32 flags) flags & QCOM_SCM_FLUSH_FLAG_MASK); } -int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id) +int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id) { int ret; __le32 svc_cmd = cpu_to_le32((svc_id << 10) | cmd_id); __le32 ret_val = 0; - ret = qcom_scm_call(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, &svc_cmd, - sizeof(svc_cmd), &ret_val, sizeof(ret_val)); + ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, + &svc_cmd, sizeof(svc_cmd), &ret_val, + sizeof(ret_val)); if (ret) return ret; return le32_to_cpu(ret_val); } -int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp) +int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req, + u32 req_cnt, u32 *resp) { if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT) return -ERANGE; - return qcom_scm_call(QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, + return qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, req, req_cnt * sizeof(*req), resp, sizeof(*resp)); } + +void __qcom_scm_init(void) +{ +} + +bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral) +{ + __le32 out; + __le32 in; + int ret; + + in = cpu_to_le32(peripheral); + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, + QCOM_SCM_PAS_IS_SUPPORTED_CMD, + &in, sizeof(in), + &out, sizeof(out)); + + return ret ? false : !!out; +} + +int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral, + dma_addr_t metadata_phys) +{ + __le32 scm_ret; + int ret; + struct { + __le32 proc; + __le32 image_addr; + } request; + + request.proc = cpu_to_le32(peripheral); + request.image_addr = cpu_to_le32(metadata_phys); + + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, + QCOM_SCM_PAS_INIT_IMAGE_CMD, + &request, sizeof(request), + &scm_ret, sizeof(scm_ret)); + + return ret ? : le32_to_cpu(scm_ret); +} + +int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral, + phys_addr_t addr, phys_addr_t size) +{ + __le32 scm_ret; + int ret; + struct { + __le32 proc; + __le32 addr; + __le32 len; + } request; + + request.proc = cpu_to_le32(peripheral); + request.addr = cpu_to_le32(addr); + request.len = cpu_to_le32(size); + + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, + QCOM_SCM_PAS_MEM_SETUP_CMD, + &request, sizeof(request), + &scm_ret, sizeof(scm_ret)); + + return ret ? : le32_to_cpu(scm_ret); +} + +int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral) +{ + __le32 out; + __le32 in; + int ret; + + in = cpu_to_le32(peripheral); + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, + QCOM_SCM_PAS_AUTH_AND_RESET_CMD, + &in, sizeof(in), + &out, sizeof(out)); + + return ret ? : le32_to_cpu(out); +} + +int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral) +{ + __le32 out; + __le32 in; + int ret; + + in = cpu_to_le32(peripheral); + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, + QCOM_SCM_PAS_SHUTDOWN_CMD, + &in, sizeof(in), + &out, sizeof(out)); + + return ret ? : le32_to_cpu(out); +} + +int __qcom_scm_pas_mss_reset(struct device *dev, bool reset) +{ + __le32 out; + __le32 in = cpu_to_le32(reset); + int ret; + + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET, + &in, sizeof(in), + &out, sizeof(out)); + + return ret ? : le32_to_cpu(out); +} diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c index bb6555f6d63b..4a0f5ead4fb5 100644 --- a/drivers/firmware/qcom_scm-64.c +++ b/drivers/firmware/qcom_scm-64.c @@ -12,7 +12,150 @@ #include #include +#include +#include +#include +#include #include +#include +#include + +#include "qcom_scm.h" + +#define QCOM_SCM_FNID(s, c) ((((s) & 0xFF) << 8) | ((c) & 0xFF)) + +#define MAX_QCOM_SCM_ARGS 10 +#define MAX_QCOM_SCM_RETS 3 + +enum qcom_scm_arg_types { + QCOM_SCM_VAL, + QCOM_SCM_RO, + QCOM_SCM_RW, + QCOM_SCM_BUFVAL, +}; + +#define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\ + (((a) & 0x3) << 4) | \ + (((b) & 0x3) << 6) | \ + (((c) & 0x3) << 8) | \ + (((d) & 0x3) << 10) | \ + (((e) & 0x3) << 12) | \ + (((f) & 0x3) << 14) | \ + (((g) & 0x3) << 16) | \ + (((h) & 0x3) << 18) | \ + (((i) & 0x3) << 20) | \ + (((j) & 0x3) << 22) | \ + ((num) & 0xf)) + +#define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) + +/** + * struct qcom_scm_desc + * @arginfo: Metadata describing the arguments in args[] + * @args: The array of arguments for the secure syscall + * @res: The values returned by the secure syscall + */ +struct qcom_scm_desc { + u32 arginfo; + u64 args[MAX_QCOM_SCM_ARGS]; +}; + +static u64 qcom_smccc_convention = -1; +static DEFINE_MUTEX(qcom_scm_lock); + +#define QCOM_SCM_EBUSY_WAIT_MS 30 +#define QCOM_SCM_EBUSY_MAX_RETRY 20 + +#define N_EXT_QCOM_SCM_ARGS 7 +#define FIRST_EXT_ARG_IDX 3 +#define N_REGISTER_ARGS (MAX_QCOM_SCM_ARGS - N_EXT_QCOM_SCM_ARGS + 1) + +/** + * qcom_scm_call() - Invoke a syscall in the secure world + * @dev: device + * @svc_id: service identifier + * @cmd_id: command identifier + * @desc: Descriptor structure containing arguments and return values + * + * Sends a command to the SCM and waits for the command to finish processing. + * This should *only* be called in pre-emptible context. +*/ +static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id, + const struct qcom_scm_desc *desc, + struct arm_smccc_res *res) +{ + int arglen = desc->arginfo & 0xf; + int retry_count = 0, i; + u32 fn_id = QCOM_SCM_FNID(svc_id, cmd_id); + u64 cmd, x5 = desc->args[FIRST_EXT_ARG_IDX]; + dma_addr_t args_phys = 0; + void *args_virt = NULL; + size_t alloc_len; + + if (unlikely(arglen > N_REGISTER_ARGS)) { + alloc_len = N_EXT_QCOM_SCM_ARGS * sizeof(u64); + args_virt = kzalloc(PAGE_ALIGN(alloc_len), GFP_KERNEL); + + if (!args_virt) + return -ENOMEM; + + if (qcom_smccc_convention == ARM_SMCCC_SMC_32) { + __le32 *args = args_virt; + + for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++) + args[i] = cpu_to_le32(desc->args[i + + FIRST_EXT_ARG_IDX]); + } else { + __le64 *args = args_virt; + + for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++) + args[i] = cpu_to_le64(desc->args[i + + FIRST_EXT_ARG_IDX]); + } + + args_phys = dma_map_single(dev, args_virt, alloc_len, + DMA_TO_DEVICE); + + if (dma_mapping_error(dev, args_phys)) { + kfree(args_virt); + return -ENOMEM; + } + + x5 = args_phys; + } + + do { + mutex_lock(&qcom_scm_lock); + + cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, + qcom_smccc_convention, + ARM_SMCCC_OWNER_SIP, fn_id); + + do { + arm_smccc_smc(cmd, desc->arginfo, desc->args[0], + desc->args[1], desc->args[2], x5, 0, 0, + res); + } while (res->a0 == QCOM_SCM_INTERRUPTED); + + mutex_unlock(&qcom_scm_lock); + + if (res->a0 == QCOM_SCM_V2_EBUSY) { + if (retry_count++ > QCOM_SCM_EBUSY_MAX_RETRY) + break; + msleep(QCOM_SCM_EBUSY_WAIT_MS); + } + } while (res->a0 == QCOM_SCM_V2_EBUSY); + + if (args_virt) { + dma_unmap_single(dev, args_phys, alloc_len, DMA_TO_DEVICE); + kfree(args_virt); + } + + if (res->a0 < 0) + return qcom_scm_remap_error(res->a0); + + return 0; +} /** * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus @@ -29,13 +172,15 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus) /** * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus + * @dev: Device pointer * @entry: Entry point function for the cpus * @cpus: The cpumask of cpus that will use the entry point * * Set the Linux entry point for the SCM to transfer control to when coming * out of a power down. CPU power down may be executed on cpuidle or hotplug. */ -int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus) +int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry, + const cpumask_t *cpus) { return -ENOTSUPP; } @@ -52,12 +197,164 @@ void __qcom_scm_cpu_power_down(u32 flags) { } -int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id) +int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id) { - return -ENOTSUPP; + int ret; + struct qcom_scm_desc desc = {0}; + struct arm_smccc_res res; + + desc.arginfo = QCOM_SCM_ARGS(1); + desc.args[0] = QCOM_SCM_FNID(svc_id, cmd_id) | + (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT); + + ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, + &desc, &res); + + return ret ? : res.a1; } -int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp) +int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req, + u32 req_cnt, u32 *resp) { - return -ENOTSUPP; + int ret; + struct qcom_scm_desc desc = {0}; + struct arm_smccc_res res; + + if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT) + return -ERANGE; + + desc.args[0] = req[0].addr; + desc.args[1] = req[0].val; + desc.args[2] = req[1].addr; + desc.args[3] = req[1].val; + desc.args[4] = req[2].addr; + desc.args[5] = req[2].val; + desc.args[6] = req[3].addr; + desc.args[7] = req[3].val; + desc.args[8] = req[4].addr; + desc.args[9] = req[4].val; + desc.arginfo = QCOM_SCM_ARGS(10); + + ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, &desc, + &res); + *resp = res.a1; + + return ret; +} + +void __qcom_scm_init(void) +{ + u64 cmd; + struct arm_smccc_res res; + u32 function = QCOM_SCM_FNID(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD); + + /* First try a SMC64 call */ + cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, + ARM_SMCCC_OWNER_SIP, function); + + arm_smccc_smc(cmd, QCOM_SCM_ARGS(1), cmd & (~BIT(ARM_SMCCC_TYPE_SHIFT)), + 0, 0, 0, 0, 0, &res); + + if (!res.a0 && res.a1) + qcom_smccc_convention = ARM_SMCCC_SMC_64; + else + qcom_smccc_convention = ARM_SMCCC_SMC_32; +} + +bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral) +{ + int ret; + struct qcom_scm_desc desc = {0}; + struct arm_smccc_res res; + + desc.args[0] = peripheral; + desc.arginfo = QCOM_SCM_ARGS(1); + + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, + QCOM_SCM_PAS_IS_SUPPORTED_CMD, + &desc, &res); + + return ret ? false : !!res.a1; +} + +int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral, + dma_addr_t metadata_phys) +{ + int ret; + struct qcom_scm_desc desc = {0}; + struct arm_smccc_res res; + + desc.args[0] = peripheral; + desc.args[1] = metadata_phys; + desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW); + + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_INIT_IMAGE_CMD, + &desc, &res); + + return ret ? : res.a1; +} + +int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral, + phys_addr_t addr, phys_addr_t size) +{ + int ret; + struct qcom_scm_desc desc = {0}; + struct arm_smccc_res res; + + desc.args[0] = peripheral; + desc.args[1] = addr; + desc.args[2] = size; + desc.arginfo = QCOM_SCM_ARGS(3); + + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MEM_SETUP_CMD, + &desc, &res); + + return ret ? : res.a1; +} + +int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral) +{ + int ret; + struct qcom_scm_desc desc = {0}; + struct arm_smccc_res res; + + desc.args[0] = peripheral; + desc.arginfo = QCOM_SCM_ARGS(1); + + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, + QCOM_SCM_PAS_AUTH_AND_RESET_CMD, + &desc, &res); + + return ret ? : res.a1; +} + +int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral) +{ + int ret; + struct qcom_scm_desc desc = {0}; + struct arm_smccc_res res; + + desc.args[0] = peripheral; + desc.arginfo = QCOM_SCM_ARGS(1); + + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_SHUTDOWN_CMD, + &desc, &res); + + return ret ? : res.a1; +} + +int __qcom_scm_pas_mss_reset(struct device *dev, bool reset) +{ + struct qcom_scm_desc desc = {0}; + struct arm_smccc_res res; + int ret; + + desc.args[0] = reset; + desc.args[1] = 0; + desc.arginfo = QCOM_SCM_ARGS(2); + + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET, &desc, + &res); + + return ret ? : res.a1; } diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c index 45c008d68891..e64a501adbf4 100644 --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c @@ -10,19 +10,64 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. */ - +#include +#include #include #include +#include #include #include +#include +#include +#include +#include #include "qcom_scm.h" +struct qcom_scm { + struct device *dev; + struct clk *core_clk; + struct clk *iface_clk; + struct clk *bus_clk; + struct reset_controller_dev reset; +}; + +static struct qcom_scm *__scm; + +static int qcom_scm_clk_enable(void) +{ + int ret; + + ret = clk_prepare_enable(__scm->core_clk); + if (ret) + goto bail; + + ret = clk_prepare_enable(__scm->iface_clk); + if (ret) + goto disable_core; + + ret = clk_prepare_enable(__scm->bus_clk); + if (ret) + goto disable_iface; + + return 0; + +disable_iface: + clk_disable_unprepare(__scm->iface_clk); +disable_core: + clk_disable_unprepare(__scm->core_clk); +bail: + return ret; +} + +static void qcom_scm_clk_disable(void) +{ + clk_disable_unprepare(__scm->core_clk); + clk_disable_unprepare(__scm->iface_clk); + clk_disable_unprepare(__scm->bus_clk); +} + /** * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus * @entry: Entry point function for the cpus @@ -47,7 +92,7 @@ EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr); */ int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus) { - return __qcom_scm_set_warm_boot_addr(entry, cpus); + return __qcom_scm_set_warm_boot_addr(__scm->dev, entry, cpus); } EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr); @@ -72,12 +117,17 @@ EXPORT_SYMBOL(qcom_scm_cpu_power_down); */ bool qcom_scm_hdcp_available(void) { - int ret; + int ret = qcom_scm_clk_enable(); - ret = __qcom_scm_is_call_available(QCOM_SCM_SVC_HDCP, - QCOM_SCM_CMD_HDCP); + if (ret) + return ret; - return (ret > 0) ? true : false; + ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP, + QCOM_SCM_CMD_HDCP); + + qcom_scm_clk_disable(); + + return ret > 0 ? true : false; } EXPORT_SYMBOL(qcom_scm_hdcp_available); @@ -91,6 +141,287 @@ EXPORT_SYMBOL(qcom_scm_hdcp_available); */ int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp) { - return __qcom_scm_hdcp_req(req, req_cnt, resp); + int ret = qcom_scm_clk_enable(); + + if (ret) + return ret; + + ret = __qcom_scm_hdcp_req(__scm->dev, req, req_cnt, resp); + qcom_scm_clk_disable(); + return ret; } EXPORT_SYMBOL(qcom_scm_hdcp_req); + +/** + * qcom_scm_pas_supported() - Check if the peripheral authentication service is + * available for the given peripherial + * @peripheral: peripheral id + * + * Returns true if PAS is supported for this peripheral, otherwise false. + */ +bool qcom_scm_pas_supported(u32 peripheral) +{ + int ret; + + ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL, + QCOM_SCM_PAS_IS_SUPPORTED_CMD); + if (ret <= 0) + return false; + + return __qcom_scm_pas_supported(__scm->dev, peripheral); +} +EXPORT_SYMBOL(qcom_scm_pas_supported); + +/** + * qcom_scm_pas_init_image() - Initialize peripheral authentication service + * state machine for a given peripheral, using the + * metadata + * @peripheral: peripheral id + * @metadata: pointer to memory containing ELF header, program header table + * and optional blob of data used for authenticating the metadata + * and the rest of the firmware + * @size: size of the metadata + * + * Returns 0 on success. + */ +int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size) +{ + dma_addr_t mdata_phys; + void *mdata_buf; + int ret; + + /* + * During the scm call memory protection will be enabled for the meta + * data blob, so make sure it's physically contiguous, 4K aligned and + * non-cachable to avoid XPU violations. + */ + mdata_buf = dma_alloc_coherent(__scm->dev, size, &mdata_phys, + GFP_KERNEL); + if (!mdata_buf) { + dev_err(__scm->dev, "Allocation of metadata buffer failed.\n"); + return -ENOMEM; + } + memcpy(mdata_buf, metadata, size); + + ret = qcom_scm_clk_enable(); + if (ret) + goto free_metadata; + + ret = __qcom_scm_pas_init_image(__scm->dev, peripheral, mdata_phys); + + qcom_scm_clk_disable(); + +free_metadata: + dma_free_coherent(__scm->dev, size, mdata_buf, mdata_phys); + + return ret; +} +EXPORT_SYMBOL(qcom_scm_pas_init_image); + +/** + * qcom_scm_pas_mem_setup() - Prepare the memory related to a given peripheral + * for firmware loading + * @peripheral: peripheral id + * @addr: start address of memory area to prepare + * @size: size of the memory area to prepare + * + * Returns 0 on success. + */ +int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size) +{ + int ret; + + ret = qcom_scm_clk_enable(); + if (ret) + return ret; + + ret = __qcom_scm_pas_mem_setup(__scm->dev, peripheral, addr, size); + qcom_scm_clk_disable(); + + return ret; +} +EXPORT_SYMBOL(qcom_scm_pas_mem_setup); + +/** + * qcom_scm_pas_auth_and_reset() - Authenticate the given peripheral firmware + * and reset the remote processor + * @peripheral: peripheral id + * + * Return 0 on success. + */ +int qcom_scm_pas_auth_and_reset(u32 peripheral) +{ + int ret; + + ret = qcom_scm_clk_enable(); + if (ret) + return ret; + + ret = __qcom_scm_pas_auth_and_reset(__scm->dev, peripheral); + qcom_scm_clk_disable(); + + return ret; +} +EXPORT_SYMBOL(qcom_scm_pas_auth_and_reset); + +/** + * qcom_scm_pas_shutdown() - Shut down the remote processor + * @peripheral: peripheral id + * + * Returns 0 on success. + */ +int qcom_scm_pas_shutdown(u32 peripheral) +{ + int ret; + + ret = qcom_scm_clk_enable(); + if (ret) + return ret; + + ret = __qcom_scm_pas_shutdown(__scm->dev, peripheral); + qcom_scm_clk_disable(); + + return ret; +} +EXPORT_SYMBOL(qcom_scm_pas_shutdown); + +static int qcom_scm_pas_reset_assert(struct reset_controller_dev *rcdev, + unsigned long idx) +{ + if (idx != 0) + return -EINVAL; + + return __qcom_scm_pas_mss_reset(__scm->dev, 1); +} + +static int qcom_scm_pas_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long idx) +{ + if (idx != 0) + return -EINVAL; + + return __qcom_scm_pas_mss_reset(__scm->dev, 0); +} + +static const struct reset_control_ops qcom_scm_pas_reset_ops = { + .assert = qcom_scm_pas_reset_assert, + .deassert = qcom_scm_pas_reset_deassert, +}; + +/** + * qcom_scm_is_available() - Checks if SCM is available + */ +bool qcom_scm_is_available(void) +{ + return !!__scm; +} +EXPORT_SYMBOL(qcom_scm_is_available); + +static int qcom_scm_probe(struct platform_device *pdev) +{ + struct qcom_scm *scm; + int ret; + + scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL); + if (!scm) + return -ENOMEM; + + scm->core_clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(scm->core_clk)) { + if (PTR_ERR(scm->core_clk) == -EPROBE_DEFER) + return PTR_ERR(scm->core_clk); + + scm->core_clk = NULL; + } + + if (of_device_is_compatible(pdev->dev.of_node, "qcom,scm")) { + scm->iface_clk = devm_clk_get(&pdev->dev, "iface"); + if (IS_ERR(scm->iface_clk)) { + if (PTR_ERR(scm->iface_clk) != -EPROBE_DEFER) + dev_err(&pdev->dev, "failed to acquire iface clk\n"); + return PTR_ERR(scm->iface_clk); + } + + scm->bus_clk = devm_clk_get(&pdev->dev, "bus"); + if (IS_ERR(scm->bus_clk)) { + if (PTR_ERR(scm->bus_clk) != -EPROBE_DEFER) + dev_err(&pdev->dev, "failed to acquire bus clk\n"); + return PTR_ERR(scm->bus_clk); + } + } + + scm->reset.ops = &qcom_scm_pas_reset_ops; + scm->reset.nr_resets = 1; + scm->reset.of_node = pdev->dev.of_node; + reset_controller_register(&scm->reset); + + /* vote for max clk rate for highest performance */ + ret = clk_set_rate(scm->core_clk, INT_MAX); + if (ret) + return ret; + + __scm = scm; + __scm->dev = &pdev->dev; + + __qcom_scm_init(); + + return 0; +} + +static const struct of_device_id qcom_scm_dt_match[] = { + { .compatible = "qcom,scm-apq8064",}, + { .compatible = "qcom,scm-msm8660",}, + { .compatible = "qcom,scm-msm8960",}, + { .compatible = "qcom,scm",}, + {} +}; + +MODULE_DEVICE_TABLE(of, qcom_scm_dt_match); + +static struct platform_driver qcom_scm_driver = { + .driver = { + .name = "qcom_scm", + .of_match_table = qcom_scm_dt_match, + }, + .probe = qcom_scm_probe, +}; + +static int __init qcom_scm_init(void) +{ + struct device_node *np, *fw_np; + int ret; + + fw_np = of_find_node_by_name(NULL, "firmware"); + + if (!fw_np) + return -ENODEV; + + np = of_find_matching_node(fw_np, qcom_scm_dt_match); + + if (!np) { + of_node_put(fw_np); + return -ENODEV; + } + + of_node_put(np); + + ret = of_platform_populate(fw_np, qcom_scm_dt_match, NULL, NULL); + + of_node_put(fw_np); + + if (ret) + return ret; + + return platform_driver_register(&qcom_scm_driver); +} + +subsys_initcall(qcom_scm_init); + +static void __exit qcom_scm_exit(void) +{ + platform_driver_unregister(&qcom_scm_driver); +} +module_exit(qcom_scm_exit); + +MODULE_DESCRIPTION("Qualcomm SCM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h index 2cce75c08b99..3584b00fe7e6 100644 --- a/drivers/firmware/qcom_scm.h +++ b/drivers/firmware/qcom_scm.h @@ -19,7 +19,8 @@ #define QCOM_SCM_FLAG_HLOS 0x01 #define QCOM_SCM_FLAG_COLDBOOT_MC 0x02 #define QCOM_SCM_FLAG_WARMBOOT_MC 0x04 -extern int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus); +extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry, + const cpumask_t *cpus); extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus); #define QCOM_SCM_CMD_TERMINATE_PC 0x2 @@ -29,14 +30,34 @@ extern void __qcom_scm_cpu_power_down(u32 flags); #define QCOM_SCM_SVC_INFO 0x6 #define QCOM_IS_CALL_AVAIL_CMD 0x1 -extern int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id); +extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, + u32 cmd_id); #define QCOM_SCM_SVC_HDCP 0x11 #define QCOM_SCM_CMD_HDCP 0x01 -extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, - u32 *resp); +extern int __qcom_scm_hdcp_req(struct device *dev, + struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp); + +extern void __qcom_scm_init(void); + +#define QCOM_SCM_SVC_PIL 0x2 +#define QCOM_SCM_PAS_INIT_IMAGE_CMD 0x1 +#define QCOM_SCM_PAS_MEM_SETUP_CMD 0x2 +#define QCOM_SCM_PAS_AUTH_AND_RESET_CMD 0x5 +#define QCOM_SCM_PAS_SHUTDOWN_CMD 0x6 +#define QCOM_SCM_PAS_IS_SUPPORTED_CMD 0x7 +#define QCOM_SCM_PAS_MSS_RESET 0xa +extern bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral); +extern int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral, + dma_addr_t metadata_phys); +extern int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral, + phys_addr_t addr, phys_addr_t size); +extern int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral); +extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral); +extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset); /* common error codes */ +#define QCOM_SCM_V2_EBUSY -12 #define QCOM_SCM_ENOMEM -5 #define QCOM_SCM_EOPNOTSUPP -4 #define QCOM_SCM_EINVAL_ADDR -3 @@ -44,4 +65,22 @@ extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, #define QCOM_SCM_ERROR -1 #define QCOM_SCM_INTERRUPTED 1 +static inline int qcom_scm_remap_error(int err) +{ + switch (err) { + case QCOM_SCM_ERROR: + return -EIO; + case QCOM_SCM_EINVAL_ADDR: + case QCOM_SCM_EINVAL_ARG: + return -EINVAL; + case QCOM_SCM_EOPNOTSUPP: + return -EOPNOTSUPP; + case QCOM_SCM_ENOMEM: + return -ENOMEM; + case QCOM_SCM_V2_EBUSY: + return -EBUSY; + } + return -EINVAL; +} + #endif diff --git a/drivers/firmware/scpi_pm_domain.c b/drivers/firmware/scpi_pm_domain.c new file mode 100644 index 000000000000..f395dec27113 --- /dev/null +++ b/drivers/firmware/scpi_pm_domain.c @@ -0,0 +1,163 @@ +/* + * SCPI Generic power domain support. + * + * Copyright (C) 2016 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include + +struct scpi_pm_domain { + struct generic_pm_domain genpd; + struct scpi_ops *ops; + u32 domain; + char name[30]; +}; + +/* + * These device power state values are not well-defined in the specification. + * In case, different implementations use different values, we can make these + * specific to compatibles rather than getting these values from device tree. + */ +enum scpi_power_domain_state { + SCPI_PD_STATE_ON = 0, + SCPI_PD_STATE_OFF = 3, +}; + +#define to_scpi_pd(gpd) container_of(gpd, struct scpi_pm_domain, genpd) + +static int scpi_pd_power(struct scpi_pm_domain *pd, bool power_on) +{ + int ret; + enum scpi_power_domain_state state; + + if (power_on) + state = SCPI_PD_STATE_ON; + else + state = SCPI_PD_STATE_OFF; + + ret = pd->ops->device_set_power_state(pd->domain, state); + if (ret) + return ret; + + return !(state == pd->ops->device_get_power_state(pd->domain)); +} + +static int scpi_pd_power_on(struct generic_pm_domain *domain) +{ + struct scpi_pm_domain *pd = to_scpi_pd(domain); + + return scpi_pd_power(pd, true); +} + +static int scpi_pd_power_off(struct generic_pm_domain *domain) +{ + struct scpi_pm_domain *pd = to_scpi_pd(domain); + + return scpi_pd_power(pd, false); +} + +static int scpi_pm_domain_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct scpi_pm_domain *scpi_pd; + struct genpd_onecell_data *scpi_pd_data; + struct generic_pm_domain **domains; + struct scpi_ops *scpi_ops; + int ret, num_domains, i; + + scpi_ops = get_scpi_ops(); + if (!scpi_ops) + return -EPROBE_DEFER; + + if (!np) { + dev_err(dev, "device tree node not found\n"); + return -ENODEV; + } + + if (!scpi_ops->device_set_power_state || + !scpi_ops->device_get_power_state) { + dev_err(dev, "power domains not supported in the firmware\n"); + return -ENODEV; + } + + ret = of_property_read_u32(np, "num-domains", &num_domains); + if (ret) { + dev_err(dev, "number of domains not found\n"); + return -EINVAL; + } + + scpi_pd = devm_kcalloc(dev, num_domains, sizeof(*scpi_pd), GFP_KERNEL); + if (!scpi_pd) + return -ENOMEM; + + scpi_pd_data = devm_kzalloc(dev, sizeof(*scpi_pd_data), GFP_KERNEL); + if (!scpi_pd_data) + return -ENOMEM; + + domains = devm_kcalloc(dev, num_domains, sizeof(*domains), GFP_KERNEL); + if (!domains) + return -ENOMEM; + + for (i = 0; i < num_domains; i++, scpi_pd++) { + domains[i] = &scpi_pd->genpd; + + scpi_pd->domain = i; + scpi_pd->ops = scpi_ops; + sprintf(scpi_pd->name, "%s.%d", np->name, i); + scpi_pd->genpd.name = scpi_pd->name; + scpi_pd->genpd.power_off = scpi_pd_power_off; + scpi_pd->genpd.power_on = scpi_pd_power_on; + + /* + * Treat all power domains as off at boot. + * + * The SCP firmware itself may have switched on some domains, + * but for reference counting purpose, keep it this way. + */ + pm_genpd_init(&scpi_pd->genpd, NULL, true); + } + + scpi_pd_data->domains = domains; + scpi_pd_data->num_domains = num_domains; + + of_genpd_add_provider_onecell(np, scpi_pd_data); + + return 0; +} + +static const struct of_device_id scpi_power_domain_ids[] = { + { .compatible = "arm,scpi-power-domains", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, scpi_power_domain_ids); + +static struct platform_driver scpi_power_domain_driver = { + .driver = { + .name = "scpi_power_domain", + .of_match_table = scpi_power_domain_ids, + }, + .probe = scpi_pm_domain_probe, +}; +module_platform_driver(scpi_power_domain_driver); + +MODULE_AUTHOR("Sudeep Holla "); +MODULE_DESCRIPTION("ARM SCPI power domain driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/keyboard/clps711x-keypad.c b/drivers/input/keyboard/clps711x-keypad.c index b637f1af842e..997e3e97f573 100644 --- a/drivers/input/keyboard/clps711x-keypad.c +++ b/drivers/input/keyboard/clps711x-keypad.c @@ -101,7 +101,7 @@ static int clps711x_keypad_probe(struct platform_device *pdev) return -ENOMEM; priv->syscon = - syscon_regmap_lookup_by_compatible("cirrus,clps711x-syscon1"); + syscon_regmap_lookup_by_compatible("cirrus,ep7209-syscon1"); if (IS_ERR(priv->syscon)) return PTR_ERR(priv->syscon); @@ -181,7 +181,7 @@ static int clps711x_keypad_remove(struct platform_device *pdev) } static const struct of_device_id clps711x_keypad_of_match[] = { - { .compatible = "cirrus,clps711x-keypad", }, + { .compatible = "cirrus,ep7209-keypad", }, { } }; MODULE_DEVICE_TABLE(of, clps711x_keypad_of_match); diff --git a/drivers/irqchip/irq-clps711x.c b/drivers/irqchip/irq-clps711x.c index 2223b3f15d68..f913f4db7ae1 100644 --- a/drivers/irqchip/irq-clps711x.c +++ b/drivers/irqchip/irq-clps711x.c @@ -234,5 +234,5 @@ static int __init clps711x_intc_init_dt(struct device_node *np, return _clps711x_intc_init(np, res.start, resource_size(&res)); } -IRQCHIP_DECLARE(clps711x, "cirrus,clps711x-intc", clps711x_intc_init_dt); +IRQCHIP_DECLARE(clps711x, "cirrus,ep7209-intc", clps711x_intc_init_dt); #endif diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index bd4d68500085..370e16e07867 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -336,7 +336,7 @@ config IR_TTUSBIR config IR_RX51 tristate "Nokia N900 IR transmitter diode" - depends on OMAP_DM_TIMER && ARCH_OMAP2PLUS && LIRC && !ARCH_MULTIPLATFORM + depends on OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS && LIRC ---help--- Say Y or M here if you want to enable support for the IR transmitter diode built in the Nokia N900 (RX51) device. diff --git a/drivers/media/rc/ir-rx51.c b/drivers/media/rc/ir-rx51.c index 4e1711a40466..82fb6f2ca011 100644 --- a/drivers/media/rc/ir-rx51.c +++ b/drivers/media/rc/ir-rx51.c @@ -12,22 +12,17 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ - +#include #include #include #include #include #include #include - -#include -#include +#include +#include +#include #include #include @@ -41,100 +36,51 @@ #define WBUF_LEN 256 -#define TIMER_MAX_VALUE 0xffffffff - struct lirc_rx51 { - struct omap_dm_timer *pwm_timer; - struct omap_dm_timer *pulse_timer; + struct pwm_device *pwm; + struct hrtimer timer; struct device *dev; struct lirc_rx51_platform_data *pdata; wait_queue_head_t wqueue; - unsigned long fclk_khz; unsigned int freq; /* carrier frequency */ unsigned int duty_cycle; /* carrier duty cycle */ - unsigned int irq_num; - unsigned int match; int wbuf[WBUF_LEN]; int wbuf_index; unsigned long device_is_open; - int pwm_timer_num; }; -static void lirc_rx51_on(struct lirc_rx51 *lirc_rx51) +static inline void lirc_rx51_on(struct lirc_rx51 *lirc_rx51) { - omap_dm_timer_set_pwm(lirc_rx51->pwm_timer, 0, 1, - OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE); + pwm_enable(lirc_rx51->pwm); } -static void lirc_rx51_off(struct lirc_rx51 *lirc_rx51) +static inline void lirc_rx51_off(struct lirc_rx51 *lirc_rx51) { - omap_dm_timer_set_pwm(lirc_rx51->pwm_timer, 0, 1, - OMAP_TIMER_TRIGGER_NONE); + pwm_disable(lirc_rx51->pwm); } static int init_timing_params(struct lirc_rx51 *lirc_rx51) { - u32 load, match; + struct pwm_device *pwm = lirc_rx51->pwm; + int duty, period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, lirc_rx51->freq); - load = -(lirc_rx51->fclk_khz * 1000 / lirc_rx51->freq); - match = -(lirc_rx51->duty_cycle * -load / 100); - omap_dm_timer_set_load(lirc_rx51->pwm_timer, 1, load); - omap_dm_timer_set_match(lirc_rx51->pwm_timer, 1, match); - omap_dm_timer_write_counter(lirc_rx51->pwm_timer, TIMER_MAX_VALUE - 2); - omap_dm_timer_start(lirc_rx51->pwm_timer); - omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0); - omap_dm_timer_start(lirc_rx51->pulse_timer); + duty = DIV_ROUND_CLOSEST(lirc_rx51->duty_cycle * period, 100); - lirc_rx51->match = 0; + pwm_config(pwm, duty, period); return 0; } -#define tics_after(a, b) ((long)(b) - (long)(a) < 0) - -static int pulse_timer_set_timeout(struct lirc_rx51 *lirc_rx51, int usec) +static enum hrtimer_restart lirc_rx51_timer_cb(struct hrtimer *timer) { - int counter; + struct lirc_rx51 *lirc_rx51 = + container_of(timer, struct lirc_rx51, timer); + ktime_t now; - BUG_ON(usec < 0); - - if (lirc_rx51->match == 0) - counter = omap_dm_timer_read_counter(lirc_rx51->pulse_timer); - else - counter = lirc_rx51->match; - - counter += (u32)(lirc_rx51->fclk_khz * usec / (1000)); - omap_dm_timer_set_match(lirc_rx51->pulse_timer, 1, counter); - omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, - OMAP_TIMER_INT_MATCH); - if (tics_after(omap_dm_timer_read_counter(lirc_rx51->pulse_timer), - counter)) { - return 1; - } - return 0; -} - -static irqreturn_t lirc_rx51_interrupt_handler(int irq, void *ptr) -{ - unsigned int retval; - struct lirc_rx51 *lirc_rx51 = ptr; - - retval = omap_dm_timer_read_status(lirc_rx51->pulse_timer); - if (!retval) - return IRQ_NONE; - - if (retval & ~OMAP_TIMER_INT_MATCH) - dev_err_ratelimited(lirc_rx51->dev, - ": Unexpected interrupt source: %x\n", retval); - - omap_dm_timer_write_status(lirc_rx51->pulse_timer, - OMAP_TIMER_INT_MATCH | - OMAP_TIMER_INT_OVERFLOW | - OMAP_TIMER_INT_CAPTURE); if (lirc_rx51->wbuf_index < 0) { dev_err_ratelimited(lirc_rx51->dev, - ": BUG wbuf_index has value of %i\n", + "BUG wbuf_index has value of %i\n", lirc_rx51->wbuf_index); goto end; } @@ -144,6 +90,8 @@ static irqreturn_t lirc_rx51_interrupt_handler(int irq, void *ptr) * pulses until we catch up. */ do { + u64 ns; + if (lirc_rx51->wbuf_index >= WBUF_LEN) goto end; if (lirc_rx51->wbuf[lirc_rx51->wbuf_index] == -1) @@ -154,84 +102,24 @@ static irqreturn_t lirc_rx51_interrupt_handler(int irq, void *ptr) else lirc_rx51_on(lirc_rx51); - retval = pulse_timer_set_timeout(lirc_rx51, - lirc_rx51->wbuf[lirc_rx51->wbuf_index]); + ns = 1000 * lirc_rx51->wbuf[lirc_rx51->wbuf_index]; + hrtimer_add_expires_ns(timer, ns); + lirc_rx51->wbuf_index++; - } while (retval); + now = timer->base->get_time(); - return IRQ_HANDLED; + } while (hrtimer_get_expires_tv64(timer) < now.tv64); + + return HRTIMER_RESTART; end: /* Stop TX here */ lirc_rx51_off(lirc_rx51); lirc_rx51->wbuf_index = -1; - omap_dm_timer_stop(lirc_rx51->pwm_timer); - omap_dm_timer_stop(lirc_rx51->pulse_timer); - omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0); + wake_up_interruptible(&lirc_rx51->wqueue); - return IRQ_HANDLED; -} - -static int lirc_rx51_init_port(struct lirc_rx51 *lirc_rx51) -{ - struct clk *clk_fclk; - int retval, pwm_timer = lirc_rx51->pwm_timer_num; - - lirc_rx51->pwm_timer = omap_dm_timer_request_specific(pwm_timer); - if (lirc_rx51->pwm_timer == NULL) { - dev_err(lirc_rx51->dev, ": Error requesting GPT%d timer\n", - pwm_timer); - return -EBUSY; - } - - lirc_rx51->pulse_timer = omap_dm_timer_request(); - if (lirc_rx51->pulse_timer == NULL) { - dev_err(lirc_rx51->dev, ": Error requesting pulse timer\n"); - retval = -EBUSY; - goto err1; - } - - omap_dm_timer_set_source(lirc_rx51->pwm_timer, OMAP_TIMER_SRC_SYS_CLK); - omap_dm_timer_set_source(lirc_rx51->pulse_timer, - OMAP_TIMER_SRC_SYS_CLK); - - omap_dm_timer_enable(lirc_rx51->pwm_timer); - omap_dm_timer_enable(lirc_rx51->pulse_timer); - - lirc_rx51->irq_num = omap_dm_timer_get_irq(lirc_rx51->pulse_timer); - retval = request_irq(lirc_rx51->irq_num, lirc_rx51_interrupt_handler, - IRQF_SHARED, "lirc_pulse_timer", lirc_rx51); - if (retval) { - dev_err(lirc_rx51->dev, ": Failed to request interrupt line\n"); - goto err2; - } - - clk_fclk = omap_dm_timer_get_fclk(lirc_rx51->pwm_timer); - lirc_rx51->fclk_khz = clk_fclk->rate / 1000; - - return 0; - -err2: - omap_dm_timer_free(lirc_rx51->pulse_timer); -err1: - omap_dm_timer_free(lirc_rx51->pwm_timer); - - return retval; -} - -static int lirc_rx51_free_port(struct lirc_rx51 *lirc_rx51) -{ - omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0); - free_irq(lirc_rx51->irq_num, lirc_rx51); - lirc_rx51_off(lirc_rx51); - omap_dm_timer_disable(lirc_rx51->pwm_timer); - omap_dm_timer_disable(lirc_rx51->pulse_timer); - omap_dm_timer_free(lirc_rx51->pwm_timer); - omap_dm_timer_free(lirc_rx51->pulse_timer); - lirc_rx51->wbuf_index = -1; - - return 0; + return HRTIMER_NORESTART; } static ssize_t lirc_rx51_write(struct file *file, const char *buf, @@ -270,8 +158,9 @@ static ssize_t lirc_rx51_write(struct file *file, const char *buf, lirc_rx51_on(lirc_rx51); lirc_rx51->wbuf_index = 1; - pulse_timer_set_timeout(lirc_rx51, lirc_rx51->wbuf[0]); - + hrtimer_start(&lirc_rx51->timer, + ns_to_ktime(1000 * lirc_rx51->wbuf[0]), + HRTIMER_MODE_REL); /* * Don't return back to the userspace until the transfer has * finished @@ -371,14 +260,24 @@ static int lirc_rx51_open(struct inode *inode, struct file *file) if (test_and_set_bit(1, &lirc_rx51->device_is_open)) return -EBUSY; - return lirc_rx51_init_port(lirc_rx51); + lirc_rx51->pwm = pwm_get(lirc_rx51->dev, NULL); + if (IS_ERR(lirc_rx51->pwm)) { + int res = PTR_ERR(lirc_rx51->pwm); + + dev_err(lirc_rx51->dev, "pwm_get failed: %d\n", res); + return res; + } + + return 0; } static int lirc_rx51_release(struct inode *inode, struct file *file) { struct lirc_rx51 *lirc_rx51 = file->private_data; - lirc_rx51_free_port(lirc_rx51); + hrtimer_cancel(&lirc_rx51->timer); + lirc_rx51_off(lirc_rx51); + pwm_put(lirc_rx51->pwm); clear_bit(1, &lirc_rx51->device_is_open); @@ -386,7 +285,6 @@ static int lirc_rx51_release(struct inode *inode, struct file *file) } static struct lirc_rx51 lirc_rx51 = { - .freq = 38000, .duty_cycle = 50, .wbuf_index = -1, }; @@ -444,9 +342,32 @@ static int lirc_rx51_resume(struct platform_device *dev) static int lirc_rx51_probe(struct platform_device *dev) { + struct pwm_device *pwm; + lirc_rx51_driver.features = LIRC_RX51_DRIVER_FEATURES; lirc_rx51.pdata = dev->dev.platform_data; - lirc_rx51.pwm_timer_num = lirc_rx51.pdata->pwm_timer; + + if (!lirc_rx51.pdata) { + dev_err(&dev->dev, "Platform Data is missing\n"); + return -ENXIO; + } + + pwm = pwm_get(&dev->dev, NULL); + if (IS_ERR(pwm)) { + int err = PTR_ERR(pwm); + + if (err != -EPROBE_DEFER) + dev_err(&dev->dev, "pwm_get failed: %d\n", err); + return err; + } + + /* Use default, in case userspace does not set the carrier */ + lirc_rx51.freq = DIV_ROUND_CLOSEST(pwm_get_period(pwm), NSEC_PER_SEC); + pwm_put(pwm); + + hrtimer_init(&lirc_rx51.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + lirc_rx51.timer.function = lirc_rx51_timer_cb; + lirc_rx51.dev = &dev->dev; lirc_rx51_driver.dev = &dev->dev; lirc_rx51_driver.minor = lirc_register_driver(&lirc_rx51_driver); @@ -457,8 +378,6 @@ static int lirc_rx51_probe(struct platform_device *dev) lirc_rx51_driver.minor); return lirc_rx51_driver.minor; } - dev_info(lirc_rx51.dev, "registration ok, minor: %d, pwm: %d\n", - lirc_rx51_driver.minor, lirc_rx51.pwm_timer_num); return 0; } @@ -468,6 +387,14 @@ static int lirc_rx51_remove(struct platform_device *dev) return lirc_unregister_driver(lirc_rx51_driver.minor); } +static const struct of_device_id lirc_rx51_match[] = { + { + .compatible = "nokia,n900-ir", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, lirc_rx51_match); + struct platform_driver lirc_rx51_platform_driver = { .probe = lirc_rx51_probe, .remove = lirc_rx51_remove, @@ -475,7 +402,7 @@ struct platform_driver lirc_rx51_platform_driver = { .resume = lirc_rx51_resume, .driver = { .name = DRIVER_NAME, - .owner = THIS_MODULE, + .of_match_table = of_match_ptr(lirc_rx51_match), }, }; module_platform_driver(lirc_rx51_platform_driver); diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig index 81ddb17575a9..133712346911 100644 --- a/drivers/memory/Kconfig +++ b/drivers/memory/Kconfig @@ -25,6 +25,17 @@ config ATMEL_SDRAMC Starting with the at91sam9g45, this controller supports SDR, DDR and LP-DDR memories. +config ATMEL_EBI + bool "Atmel EBI driver" + default y + depends on ARCH_AT91 && OF + select MFD_SYSCON + help + Driver for Atmel EBI controller. + Used to configure the EBI (external bus interface) when the device- + tree is used. This bus supports NANDs, external ethernet controller, + SRAMs, ATA devices, etc. + config TI_AEMIF tristate "Texas Instruments AEMIF driver" depends on (ARCH_DAVINCI || ARCH_KEYSTONE) && OF diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile index cb0b7a1df11a..b20ae38b5bfb 100644 --- a/drivers/memory/Makefile +++ b/drivers/memory/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_OF) += of_memory.o endif obj-$(CONFIG_ARM_PL172_MPMC) += pl172.o obj-$(CONFIG_ATMEL_SDRAMC) += atmel-sdramc.o +obj-$(CONFIG_ATMEL_EBI) += atmel-ebi.o obj-$(CONFIG_TI_AEMIF) += ti-aemif.o obj-$(CONFIG_TI_EMIF) += emif.o obj-$(CONFIG_OMAP_GPMC) += omap-gpmc.o diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c new file mode 100644 index 000000000000..f87ad6f5d2dc --- /dev/null +++ b/drivers/memory/atmel-ebi.c @@ -0,0 +1,766 @@ +/* + * EBI driver for Atmel chips + * inspired by the fsl weim bus driver + * + * Copyright (C) 2013 Jean-Jacques Hiblot + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +struct at91sam9_smc_timings { + u32 ncs_rd_setup_ns; + u32 nrd_setup_ns; + u32 ncs_wr_setup_ns; + u32 nwe_setup_ns; + u32 ncs_rd_pulse_ns; + u32 nrd_pulse_ns; + u32 ncs_wr_pulse_ns; + u32 nwe_pulse_ns; + u32 nrd_cycle_ns; + u32 nwe_cycle_ns; + u32 tdf_ns; +}; + +struct at91sam9_smc_generic_fields { + struct regmap_field *setup; + struct regmap_field *pulse; + struct regmap_field *cycle; + struct regmap_field *mode; +}; + +struct at91sam9_ebi_dev_config { + struct at91sam9_smc_timings timings; + u32 mode; +}; + +struct at91_ebi_dev_config { + int cs; + union { + struct at91sam9_ebi_dev_config sam9; + }; +}; + +struct at91_ebi; + +struct at91_ebi_dev { + struct list_head node; + struct at91_ebi *ebi; + u32 mode; + int numcs; + struct at91_ebi_dev_config configs[]; +}; + +struct at91_ebi_caps { + unsigned int available_cs; + const struct reg_field *ebi_csa; + void (*get_config)(struct at91_ebi_dev *ebid, + struct at91_ebi_dev_config *conf); + int (*xlate_config)(struct at91_ebi_dev *ebid, + struct device_node *configs_np, + struct at91_ebi_dev_config *conf); + int (*apply_config)(struct at91_ebi_dev *ebid, + struct at91_ebi_dev_config *conf); + int (*init)(struct at91_ebi *ebi); +}; + +struct at91_ebi { + struct clk *clk; + struct regmap *smc; + struct regmap *matrix; + + struct regmap_field *ebi_csa; + + struct device *dev; + const struct at91_ebi_caps *caps; + struct list_head devs; + union { + struct at91sam9_smc_generic_fields sam9; + }; +}; + +static void at91sam9_ebi_get_config(struct at91_ebi_dev *ebid, + struct at91_ebi_dev_config *conf) +{ + struct at91sam9_smc_generic_fields *fields = &ebid->ebi->sam9; + unsigned int clk_rate = clk_get_rate(ebid->ebi->clk); + struct at91sam9_ebi_dev_config *config = &conf->sam9; + struct at91sam9_smc_timings *timings = &config->timings; + unsigned int val; + + regmap_fields_read(fields->mode, conf->cs, &val); + config->mode = val & ~AT91_SMC_TDF; + + val = (val & AT91_SMC_TDF) >> 16; + timings->tdf_ns = clk_rate * val; + + regmap_fields_read(fields->setup, conf->cs, &val); + timings->ncs_rd_setup_ns = (val >> 24) & 0x1f; + timings->ncs_rd_setup_ns += ((val >> 29) & 0x1) * 128; + timings->ncs_rd_setup_ns *= clk_rate; + timings->nrd_setup_ns = (val >> 16) & 0x1f; + timings->nrd_setup_ns += ((val >> 21) & 0x1) * 128; + timings->nrd_setup_ns *= clk_rate; + timings->ncs_wr_setup_ns = (val >> 8) & 0x1f; + timings->ncs_wr_setup_ns += ((val >> 13) & 0x1) * 128; + timings->ncs_wr_setup_ns *= clk_rate; + timings->nwe_setup_ns = val & 0x1f; + timings->nwe_setup_ns += ((val >> 5) & 0x1) * 128; + timings->nwe_setup_ns *= clk_rate; + + regmap_fields_read(fields->pulse, conf->cs, &val); + timings->ncs_rd_pulse_ns = (val >> 24) & 0x3f; + timings->ncs_rd_pulse_ns += ((val >> 30) & 0x1) * 256; + timings->ncs_rd_pulse_ns *= clk_rate; + timings->nrd_pulse_ns = (val >> 16) & 0x3f; + timings->nrd_pulse_ns += ((val >> 22) & 0x1) * 256; + timings->nrd_pulse_ns *= clk_rate; + timings->ncs_wr_pulse_ns = (val >> 8) & 0x3f; + timings->ncs_wr_pulse_ns += ((val >> 14) & 0x1) * 256; + timings->ncs_wr_pulse_ns *= clk_rate; + timings->nwe_pulse_ns = val & 0x3f; + timings->nwe_pulse_ns += ((val >> 6) & 0x1) * 256; + timings->nwe_pulse_ns *= clk_rate; + + regmap_fields_read(fields->cycle, conf->cs, &val); + timings->nrd_cycle_ns = (val >> 16) & 0x7f; + timings->nrd_cycle_ns += ((val >> 23) & 0x3) * 256; + timings->nrd_cycle_ns *= clk_rate; + timings->nwe_cycle_ns = val & 0x7f; + timings->nwe_cycle_ns += ((val >> 7) & 0x3) * 256; + timings->nwe_cycle_ns *= clk_rate; +} + +static int at91_xlate_timing(struct device_node *np, const char *prop, + u32 *val, bool *required) +{ + if (!of_property_read_u32(np, prop, val)) { + *required = true; + return 0; + } + + if (*required) + return -EINVAL; + + return 0; +} + +static int at91sam9_smc_xslate_timings(struct at91_ebi_dev *ebid, + struct device_node *np, + struct at91sam9_smc_timings *timings, + bool *required) +{ + int ret; + + ret = at91_xlate_timing(np, "atmel,smc-ncs-rd-setup-ns", + &timings->ncs_rd_setup_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-nrd-setup-ns", + &timings->nrd_setup_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-ncs-wr-setup-ns", + &timings->ncs_wr_setup_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-nwe-setup-ns", + &timings->nwe_setup_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-ncs-rd-pulse-ns", + &timings->ncs_rd_pulse_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-nrd-pulse-ns", + &timings->nrd_pulse_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-ncs-wr-pulse-ns", + &timings->ncs_wr_pulse_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-nwe-pulse-ns", + &timings->nwe_pulse_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-nwe-cycle-ns", + &timings->nwe_cycle_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-nrd-cycle-ns", + &timings->nrd_cycle_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-tdf-ns", + &timings->tdf_ns, required); + +out: + if (ret) + dev_err(ebid->ebi->dev, + "missing or invalid timings definition in %s", + np->full_name); + + return ret; +} + +static int at91sam9_ebi_xslate_config(struct at91_ebi_dev *ebid, + struct device_node *np, + struct at91_ebi_dev_config *conf) +{ + struct at91sam9_ebi_dev_config *config = &conf->sam9; + bool required = false; + const char *tmp_str; + u32 tmp; + int ret; + + ret = of_property_read_u32(np, "atmel,smc-bus-width", &tmp); + if (!ret) { + switch (tmp) { + case 8: + config->mode |= AT91_SMC_DBW_8; + break; + + case 16: + config->mode |= AT91_SMC_DBW_16; + break; + + case 32: + config->mode |= AT91_SMC_DBW_32; + break; + + default: + return -EINVAL; + } + + required = true; + } + + if (of_property_read_bool(np, "atmel,smc-tdf-optimized")) { + config->mode |= AT91_SMC_TDFMODE_OPTIMIZED; + required = true; + } + + tmp_str = NULL; + of_property_read_string(np, "atmel,smc-byte-access-type", &tmp_str); + if (tmp_str && !strcmp(tmp_str, "write")) { + config->mode |= AT91_SMC_BAT_WRITE; + required = true; + } + + tmp_str = NULL; + of_property_read_string(np, "atmel,smc-read-mode", &tmp_str); + if (tmp_str && !strcmp(tmp_str, "nrd")) { + config->mode |= AT91_SMC_READMODE_NRD; + required = true; + } + + tmp_str = NULL; + of_property_read_string(np, "atmel,smc-write-mode", &tmp_str); + if (tmp_str && !strcmp(tmp_str, "nwe")) { + config->mode |= AT91_SMC_WRITEMODE_NWE; + required = true; + } + + tmp_str = NULL; + of_property_read_string(np, "atmel,smc-exnw-mode", &tmp_str); + if (tmp_str) { + if (!strcmp(tmp_str, "frozen")) + config->mode |= AT91_SMC_EXNWMODE_FROZEN; + else if (!strcmp(tmp_str, "ready")) + config->mode |= AT91_SMC_EXNWMODE_READY; + else if (strcmp(tmp_str, "disabled")) + return -EINVAL; + + required = true; + } + + ret = of_property_read_u32(np, "atmel,smc-page-mode", &tmp); + if (!ret) { + switch (tmp) { + case 4: + config->mode |= AT91_SMC_PS_4; + break; + + case 8: + config->mode |= AT91_SMC_PS_8; + break; + + case 16: + config->mode |= AT91_SMC_PS_16; + break; + + case 32: + config->mode |= AT91_SMC_PS_32; + break; + + default: + return -EINVAL; + } + + config->mode |= AT91_SMC_PMEN; + required = true; + } + + ret = at91sam9_smc_xslate_timings(ebid, np, &config->timings, + &required); + if (ret) + return ret; + + return required; +} + +static int at91sam9_ebi_apply_config(struct at91_ebi_dev *ebid, + struct at91_ebi_dev_config *conf) +{ + unsigned int clk_rate = clk_get_rate(ebid->ebi->clk); + struct at91sam9_ebi_dev_config *config = &conf->sam9; + struct at91sam9_smc_timings *timings = &config->timings; + struct at91sam9_smc_generic_fields *fields = &ebid->ebi->sam9; + u32 coded_val; + u32 val; + + coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate, + timings->ncs_rd_setup_ns); + val = AT91SAM9_SMC_NCS_NRDSETUP(coded_val); + coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate, + timings->nrd_setup_ns); + val |= AT91SAM9_SMC_NRDSETUP(coded_val); + coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate, + timings->ncs_wr_setup_ns); + val |= AT91SAM9_SMC_NCS_WRSETUP(coded_val); + coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate, + timings->nwe_setup_ns); + val |= AT91SAM9_SMC_NWESETUP(coded_val); + regmap_fields_write(fields->setup, conf->cs, val); + + coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate, + timings->ncs_rd_pulse_ns); + val = AT91SAM9_SMC_NCS_NRDPULSE(coded_val); + coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate, + timings->nrd_pulse_ns); + val |= AT91SAM9_SMC_NRDPULSE(coded_val); + coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate, + timings->ncs_wr_pulse_ns); + val |= AT91SAM9_SMC_NCS_WRPULSE(coded_val); + coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate, + timings->nwe_pulse_ns); + val |= AT91SAM9_SMC_NWEPULSE(coded_val); + regmap_fields_write(fields->pulse, conf->cs, val); + + coded_val = at91sam9_smc_cycle_ns_to_cycles(clk_rate, + timings->nrd_cycle_ns); + val = AT91SAM9_SMC_NRDCYCLE(coded_val); + coded_val = at91sam9_smc_cycle_ns_to_cycles(clk_rate, + timings->nwe_cycle_ns); + val |= AT91SAM9_SMC_NWECYCLE(coded_val); + regmap_fields_write(fields->cycle, conf->cs, val); + + val = DIV_ROUND_UP(timings->tdf_ns, clk_rate); + if (val > AT91_SMC_TDF_MAX) + val = AT91_SMC_TDF_MAX; + regmap_fields_write(fields->mode, conf->cs, + config->mode | AT91_SMC_TDF_(val)); + + return 0; +} + +static int at91sam9_ebi_init(struct at91_ebi *ebi) +{ + struct at91sam9_smc_generic_fields *fields = &ebi->sam9; + struct reg_field field = REG_FIELD(0, 0, 31); + + field.id_size = fls(ebi->caps->available_cs); + field.id_offset = AT91SAM9_SMC_GENERIC_BLK_SZ; + + field.reg = AT91SAM9_SMC_SETUP(AT91SAM9_SMC_GENERIC); + fields->setup = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->setup)) + return PTR_ERR(fields->setup); + + field.reg = AT91SAM9_SMC_PULSE(AT91SAM9_SMC_GENERIC); + fields->pulse = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->pulse)) + return PTR_ERR(fields->pulse); + + field.reg = AT91SAM9_SMC_CYCLE(AT91SAM9_SMC_GENERIC); + fields->cycle = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->cycle)) + return PTR_ERR(fields->cycle); + + field.reg = AT91SAM9_SMC_MODE(AT91SAM9_SMC_GENERIC); + fields->mode = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->mode)) + return PTR_ERR(fields->mode); + + return 0; +} + +static int sama5d3_ebi_init(struct at91_ebi *ebi) +{ + struct at91sam9_smc_generic_fields *fields = &ebi->sam9; + struct reg_field field = REG_FIELD(0, 0, 31); + + field.id_size = fls(ebi->caps->available_cs); + field.id_offset = SAMA5_SMC_GENERIC_BLK_SZ; + + field.reg = AT91SAM9_SMC_SETUP(SAMA5_SMC_GENERIC); + fields->setup = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->setup)) + return PTR_ERR(fields->setup); + + field.reg = AT91SAM9_SMC_PULSE(SAMA5_SMC_GENERIC); + fields->pulse = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->pulse)) + return PTR_ERR(fields->pulse); + + field.reg = AT91SAM9_SMC_CYCLE(SAMA5_SMC_GENERIC); + fields->cycle = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->cycle)) + return PTR_ERR(fields->cycle); + + field.reg = SAMA5_SMC_MODE(SAMA5_SMC_GENERIC); + fields->mode = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->mode)) + return PTR_ERR(fields->mode); + + return 0; +} + +static int at91_ebi_dev_setup(struct at91_ebi *ebi, struct device_node *np, + int reg_cells) +{ + const struct at91_ebi_caps *caps = ebi->caps; + struct at91_ebi_dev_config conf = { }; + struct device *dev = ebi->dev; + struct at91_ebi_dev *ebid; + int ret, numcs = 0, i; + bool apply = false; + + numcs = of_property_count_elems_of_size(np, "reg", + reg_cells * sizeof(u32)); + if (numcs <= 0) { + dev_err(dev, "invalid reg property in %s\n", np->full_name); + return -EINVAL; + } + + ebid = devm_kzalloc(ebi->dev, + sizeof(*ebid) + (numcs * sizeof(*ebid->configs)), + GFP_KERNEL); + if (!ebid) + return -ENOMEM; + + ebid->ebi = ebi; + + ret = caps->xlate_config(ebid, np, &conf); + if (ret < 0) + return ret; + else if (ret) + apply = true; + + for (i = 0; i < numcs; i++) { + u32 cs; + + ret = of_property_read_u32_index(np, "reg", i * reg_cells, + &cs); + if (ret) + return ret; + + if (cs > AT91_MATRIX_EBI_NUM_CS || + !(ebi->caps->available_cs & BIT(cs))) { + dev_err(dev, "invalid reg property in %s\n", + np->full_name); + return -EINVAL; + } + + ebid->configs[i].cs = cs; + + if (apply) { + conf.cs = cs; + ret = caps->apply_config(ebid, &conf); + if (ret) + return ret; + } + + caps->get_config(ebid, &ebid->configs[i]); + + /* + * Attach the EBI device to the generic SMC logic if at least + * one "atmel,smc-" property is present. + */ + if (ebi->ebi_csa && ret) + regmap_field_update_bits(ebi->ebi_csa, + BIT(cs), 0); + } + + list_add_tail(&ebid->node, &ebi->devs); + + return 0; +} + +static const struct reg_field at91sam9260_ebi_csa = + REG_FIELD(AT91SAM9260_MATRIX_EBICSA, 0, + AT91_MATRIX_EBI_NUM_CS - 1); + +static const struct at91_ebi_caps at91sam9260_ebi_caps = { + .available_cs = 0xff, + .ebi_csa = &at91sam9260_ebi_csa, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = at91sam9_ebi_init, +}; + +static const struct reg_field at91sam9261_ebi_csa = + REG_FIELD(AT91SAM9261_MATRIX_EBICSA, 0, + AT91_MATRIX_EBI_NUM_CS - 1); + +static const struct at91_ebi_caps at91sam9261_ebi_caps = { + .available_cs = 0xff, + .ebi_csa = &at91sam9261_ebi_csa, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = at91sam9_ebi_init, +}; + +static const struct reg_field at91sam9263_ebi0_csa = + REG_FIELD(AT91SAM9263_MATRIX_EBI0CSA, 0, + AT91_MATRIX_EBI_NUM_CS - 1); + +static const struct at91_ebi_caps at91sam9263_ebi0_caps = { + .available_cs = 0x3f, + .ebi_csa = &at91sam9263_ebi0_csa, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = at91sam9_ebi_init, +}; + +static const struct reg_field at91sam9263_ebi1_csa = + REG_FIELD(AT91SAM9263_MATRIX_EBI1CSA, 0, + AT91_MATRIX_EBI_NUM_CS - 1); + +static const struct at91_ebi_caps at91sam9263_ebi1_caps = { + .available_cs = 0x7, + .ebi_csa = &at91sam9263_ebi1_csa, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = at91sam9_ebi_init, +}; + +static const struct reg_field at91sam9rl_ebi_csa = + REG_FIELD(AT91SAM9RL_MATRIX_EBICSA, 0, + AT91_MATRIX_EBI_NUM_CS - 1); + +static const struct at91_ebi_caps at91sam9rl_ebi_caps = { + .available_cs = 0x3f, + .ebi_csa = &at91sam9rl_ebi_csa, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = at91sam9_ebi_init, +}; + +static const struct reg_field at91sam9g45_ebi_csa = + REG_FIELD(AT91SAM9G45_MATRIX_EBICSA, 0, + AT91_MATRIX_EBI_NUM_CS - 1); + +static const struct at91_ebi_caps at91sam9g45_ebi_caps = { + .available_cs = 0x3f, + .ebi_csa = &at91sam9g45_ebi_csa, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = at91sam9_ebi_init, +}; + +static const struct at91_ebi_caps at91sam9x5_ebi_caps = { + .available_cs = 0x3f, + .ebi_csa = &at91sam9263_ebi0_csa, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = at91sam9_ebi_init, +}; + +static const struct at91_ebi_caps sama5d3_ebi_caps = { + .available_cs = 0xf, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = sama5d3_ebi_init, +}; + +static const struct of_device_id at91_ebi_id_table[] = { + { + .compatible = "atmel,at91sam9260-ebi", + .data = &at91sam9260_ebi_caps, + }, + { + .compatible = "atmel,at91sam9261-ebi", + .data = &at91sam9261_ebi_caps, + }, + { + .compatible = "atmel,at91sam9263-ebi0", + .data = &at91sam9263_ebi0_caps, + }, + { + .compatible = "atmel,at91sam9263-ebi1", + .data = &at91sam9263_ebi1_caps, + }, + { + .compatible = "atmel,at91sam9rl-ebi", + .data = &at91sam9rl_ebi_caps, + }, + { + .compatible = "atmel,at91sam9g45-ebi", + .data = &at91sam9g45_ebi_caps, + }, + { + .compatible = "atmel,at91sam9x5-ebi", + .data = &at91sam9x5_ebi_caps, + }, + { + .compatible = "atmel,sama5d3-ebi", + .data = &sama5d3_ebi_caps, + }, + { /* sentinel */ } +}; + +static int at91_ebi_dev_disable(struct at91_ebi *ebi, struct device_node *np) +{ + struct device *dev = ebi->dev; + struct property *newprop; + + newprop = devm_kzalloc(dev, sizeof(*newprop), GFP_KERNEL); + if (!newprop) + return -ENOMEM; + + newprop->name = devm_kstrdup(dev, "status", GFP_KERNEL); + if (!newprop->name) + return -ENOMEM; + + newprop->value = devm_kstrdup(dev, "disabled", GFP_KERNEL); + if (!newprop->name) + return -ENOMEM; + + newprop->length = sizeof("disabled"); + + return of_update_property(np, newprop); +} + +static int at91_ebi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *child, *np = dev->of_node; + const struct of_device_id *match; + struct at91_ebi *ebi; + int ret, reg_cells; + struct clk *clk; + u32 val; + + match = of_match_device(at91_ebi_id_table, dev); + if (!match || !match->data) + return -EINVAL; + + ebi = devm_kzalloc(dev, sizeof(*ebi), GFP_KERNEL); + if (!ebi) + return -ENOMEM; + + INIT_LIST_HEAD(&ebi->devs); + ebi->caps = match->data; + ebi->dev = dev; + + clk = devm_clk_get(dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ebi->clk = clk; + + ebi->smc = syscon_regmap_lookup_by_phandle(np, "atmel,smc"); + if (IS_ERR(ebi->smc)) + return PTR_ERR(ebi->smc); + + /* + * The sama5d3 does not provide an EBICSA register and thus does need + * to access the matrix registers. + */ + if (ebi->caps->ebi_csa) { + ebi->matrix = + syscon_regmap_lookup_by_phandle(np, "atmel,matrix"); + if (IS_ERR(ebi->matrix)) + return PTR_ERR(ebi->matrix); + + ebi->ebi_csa = regmap_field_alloc(ebi->matrix, + *ebi->caps->ebi_csa); + if (IS_ERR(ebi->ebi_csa)) + return PTR_ERR(ebi->ebi_csa); + } + + ret = ebi->caps->init(ebi); + if (ret) + return ret; + + ret = of_property_read_u32(np, "#address-cells", &val); + if (ret) { + dev_err(dev, "missing #address-cells property\n"); + return ret; + } + + reg_cells = val; + + ret = of_property_read_u32(np, "#size-cells", &val); + if (ret) { + dev_err(dev, "missing #address-cells property\n"); + return ret; + } + + reg_cells += val; + + for_each_available_child_of_node(np, child) { + if (!of_find_property(child, "reg", NULL)) + continue; + + ret = at91_ebi_dev_setup(ebi, child, reg_cells); + if (ret) { + dev_err(dev, "failed to configure EBI bus for %s, disabling the device", + child->full_name); + + ret = at91_ebi_dev_disable(ebi, child); + if (ret) + return ret; + } + } + + return of_platform_populate(np, NULL, NULL, dev); +} + +static struct platform_driver at91_ebi_driver = { + .driver = { + .name = "atmel-ebi", + .of_match_table = at91_ebi_id_table, + }, +}; +builtin_platform_driver_probe(at91_ebi_driver, at91_ebi_probe); diff --git a/drivers/memory/atmel-sdramc.c b/drivers/memory/atmel-sdramc.c index a3ebc8a87479..53a341f3b305 100644 --- a/drivers/memory/atmel-sdramc.c +++ b/drivers/memory/atmel-sdramc.c @@ -1,6 +1,8 @@ /* * Atmel (Multi-port DDR-)SDRAM Controller driver * + * Author: Alexandre Belloni + * * Copyright (C) 2014 Atmel * * This program is free software: you can redistribute it and/or modify @@ -20,7 +22,7 @@ #include #include #include -#include +#include #include #include @@ -48,7 +50,6 @@ static const struct of_device_id atmel_ramc_of_match[] = { { .compatible = "atmel,sama5d3-ddramc", .data = &sama5d3_caps, }, {}, }; -MODULE_DEVICE_TABLE(of, atmel_ramc_of_match); static int atmel_ramc_probe(struct platform_device *pdev) { @@ -90,8 +91,4 @@ static int __init atmel_ramc_init(void) { return platform_driver_register(&atmel_ramc_driver); } -module_init(atmel_ramc_init); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Alexandre Belloni "); -MODULE_DESCRIPTION("Atmel (Multi-port DDR-)SDRAM Controller"); +device_initcall(atmel_ramc_init); diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index 4721b591994f..869c83fb3c5d 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -1807,7 +1806,6 @@ static const struct of_device_id gpmc_dt_ids[] = { { .compatible = "ti,am3352-gpmc" }, /* am335x devices */ { } }; -MODULE_DEVICE_TABLE(of, gpmc_dt_ids); /** * gpmc_read_settings_dt - read gpmc settings from device-tree @@ -2154,68 +2152,6 @@ err: return ret; } -static int gpmc_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) -{ - return 1; /* we're input only */ -} - -static int gpmc_gpio_direction_input(struct gpio_chip *chip, - unsigned int offset) -{ - return 0; /* we're input only */ -} - -static int gpmc_gpio_direction_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - return -EINVAL; /* we're input only */ -} - -static void gpmc_gpio_set(struct gpio_chip *chip, unsigned int offset, - int value) -{ -} - -static int gpmc_gpio_get(struct gpio_chip *chip, unsigned int offset) -{ - u32 reg; - - offset += 8; - - reg = gpmc_read_reg(GPMC_STATUS) & BIT(offset); - - return !!reg; -} - -static int gpmc_gpio_init(struct gpmc_device *gpmc) -{ - int ret; - - gpmc->gpio_chip.parent = gpmc->dev; - gpmc->gpio_chip.owner = THIS_MODULE; - gpmc->gpio_chip.label = DEVICE_NAME; - gpmc->gpio_chip.ngpio = gpmc_nr_waitpins; - gpmc->gpio_chip.get_direction = gpmc_gpio_get_direction; - gpmc->gpio_chip.direction_input = gpmc_gpio_direction_input; - gpmc->gpio_chip.direction_output = gpmc_gpio_direction_output; - gpmc->gpio_chip.set = gpmc_gpio_set; - gpmc->gpio_chip.get = gpmc_gpio_get; - gpmc->gpio_chip.base = -1; - - ret = gpiochip_add(&gpmc->gpio_chip); - if (ret < 0) { - dev_err(gpmc->dev, "could not register gpio chip: %d\n", ret); - return ret; - } - - return 0; -} - -static void gpmc_gpio_exit(struct gpmc_device *gpmc) -{ - gpiochip_remove(&gpmc->gpio_chip); -} - static int gpmc_probe_dt(struct platform_device *pdev) { int ret; @@ -2280,7 +2216,69 @@ static int gpmc_probe_dt_children(struct platform_device *pdev) { return 0; } -#endif +#endif /* CONFIG_OF */ + +static int gpmc_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) +{ + return 1; /* we're input only */ +} + +static int gpmc_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + return 0; /* we're input only */ +} + +static int gpmc_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + return -EINVAL; /* we're input only */ +} + +static void gpmc_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ +} + +static int gpmc_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + u32 reg; + + offset += 8; + + reg = gpmc_read_reg(GPMC_STATUS) & BIT(offset); + + return !!reg; +} + +static int gpmc_gpio_init(struct gpmc_device *gpmc) +{ + int ret; + + gpmc->gpio_chip.parent = gpmc->dev; + gpmc->gpio_chip.owner = THIS_MODULE; + gpmc->gpio_chip.label = DEVICE_NAME; + gpmc->gpio_chip.ngpio = gpmc_nr_waitpins; + gpmc->gpio_chip.get_direction = gpmc_gpio_get_direction; + gpmc->gpio_chip.direction_input = gpmc_gpio_direction_input; + gpmc->gpio_chip.direction_output = gpmc_gpio_direction_output; + gpmc->gpio_chip.set = gpmc_gpio_set; + gpmc->gpio_chip.get = gpmc_gpio_get; + gpmc->gpio_chip.base = -1; + + ret = gpiochip_add(&gpmc->gpio_chip); + if (ret < 0) { + dev_err(gpmc->dev, "could not register gpio chip: %d\n", ret); + return ret; + } + + return 0; +} + +static void gpmc_gpio_exit(struct gpmc_device *gpmc) +{ + gpiochip_remove(&gpmc->gpio_chip); +} static int gpmc_probe(struct platform_device *pdev) { @@ -2436,15 +2434,7 @@ static __init int gpmc_init(void) { return platform_driver_register(&gpmc_driver); } - -static __exit void gpmc_exit(void) -{ - platform_driver_unregister(&gpmc_driver); - -} - postcore_initcall(gpmc_init); -module_exit(gpmc_exit); static struct omap3_gpmc_regs gpmc_context; diff --git a/drivers/memory/samsung/exynos-srom.c b/drivers/memory/samsung/exynos-srom.c index 96756fb4d6bd..bf827a666694 100644 --- a/drivers/memory/samsung/exynos-srom.c +++ b/drivers/memory/samsung/exynos-srom.c @@ -11,7 +11,7 @@ */ #include -#include +#include #include #include #include @@ -91,17 +91,17 @@ static int exynos_srom_configure_bank(struct exynos_srom *srom, if (width == 2) cs |= 1 << EXYNOS_SROM_BW__DATAWIDTH__SHIFT; - bw = __raw_readl(srom->reg_base + EXYNOS_SROM_BW); + bw = readl_relaxed(srom->reg_base + EXYNOS_SROM_BW); bw = (bw & ~(EXYNOS_SROM_BW__CS_MASK << bank)) | (cs << bank); - __raw_writel(bw, srom->reg_base + EXYNOS_SROM_BW); + writel_relaxed(bw, srom->reg_base + EXYNOS_SROM_BW); - __raw_writel(pmc | (timing[0] << EXYNOS_SROM_BCX__TACP__SHIFT) | - (timing[1] << EXYNOS_SROM_BCX__TCAH__SHIFT) | - (timing[2] << EXYNOS_SROM_BCX__TCOH__SHIFT) | - (timing[3] << EXYNOS_SROM_BCX__TACC__SHIFT) | - (timing[4] << EXYNOS_SROM_BCX__TCOS__SHIFT) | - (timing[5] << EXYNOS_SROM_BCX__TACS__SHIFT), - srom->reg_base + EXYNOS_SROM_BC0 + bank); + writel_relaxed(pmc | (timing[0] << EXYNOS_SROM_BCX__TACP__SHIFT) | + (timing[1] << EXYNOS_SROM_BCX__TCAH__SHIFT) | + (timing[2] << EXYNOS_SROM_BCX__TCOH__SHIFT) | + (timing[3] << EXYNOS_SROM_BCX__TACC__SHIFT) | + (timing[4] << EXYNOS_SROM_BCX__TCOS__SHIFT) | + (timing[5] << EXYNOS_SROM_BCX__TACS__SHIFT), + srom->reg_base + EXYNOS_SROM_BC0 + bank); return 0; } @@ -134,7 +134,7 @@ static int exynos_srom_probe(struct platform_device *pdev) platform_set_drvdata(pdev, srom); srom->reg_offset = exynos_srom_alloc_reg_dump(exynos_srom_offsets, - sizeof(exynos_srom_offsets)); + ARRAY_SIZE(exynos_srom_offsets)); if (!srom->reg_offset) { iounmap(srom->reg_base); return -ENOMEM; @@ -159,16 +159,6 @@ static int exynos_srom_probe(struct platform_device *pdev) return of_platform_populate(np, NULL, NULL, dev); } -static int exynos_srom_remove(struct platform_device *pdev) -{ - struct exynos_srom *srom = platform_get_drvdata(pdev); - - kfree(srom->reg_offset); - iounmap(srom->reg_base); - - return 0; -} - #ifdef CONFIG_PM_SLEEP static void exynos_srom_save(void __iomem *base, struct exynos_srom_reg_dump *rd, @@ -211,21 +201,16 @@ static const struct of_device_id of_exynos_srom_ids[] = { }, {}, }; -MODULE_DEVICE_TABLE(of, of_exynos_srom_ids); static SIMPLE_DEV_PM_OPS(exynos_srom_pm_ops, exynos_srom_suspend, exynos_srom_resume); static struct platform_driver exynos_srom_driver = { .probe = exynos_srom_probe, - .remove = exynos_srom_remove, .driver = { .name = "exynos-srom", .of_match_table = of_exynos_srom_ids, .pm = &exynos_srom_pm_ops, + .suppress_bind_attrs = true, }, }; -module_platform_driver(exynos_srom_driver); - -MODULE_AUTHOR("Pankaj Dubey "); -MODULE_DESCRIPTION("Exynos SROM Controller Driver"); -MODULE_LICENSE("GPL"); +builtin_platform_driver(exynos_srom_driver); diff --git a/drivers/memory/tegra/mc.c b/drivers/memory/tegra/mc.c index a1ae0cc2b86d..a4803ac192bb 100644 --- a/drivers/memory/tegra/mc.c +++ b/drivers/memory/tegra/mc.c @@ -186,8 +186,10 @@ static int load_timings(struct tegra_mc *mc, struct device_node *node) timing = &mc->timings[i++]; err = load_one_timing(mc, timing, child); - if (err) + if (err) { + of_node_put(child); return err; + } } return 0; @@ -206,15 +208,13 @@ static int tegra_mc_setup_timings(struct tegra_mc *mc) for_each_child_of_node(mc->dev->of_node, node) { err = of_property_read_u32(node, "nvidia,ram-code", &node_ram_code); - if (err || (node_ram_code != ram_code)) { - of_node_put(node); + if (err || (node_ram_code != ram_code)) continue; - } err = load_timings(mc, node); + of_node_put(node); if (err) return err; - of_node_put(node); break; } diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c index 3dac7be39654..06cc781ebac1 100644 --- a/drivers/memory/tegra/tegra124-emc.c +++ b/drivers/memory/tegra/tegra124-emc.c @@ -970,8 +970,10 @@ static int tegra_emc_load_timings_from_dt(struct tegra_emc *emc, timing = &emc->timings[i++]; err = load_one_timing_from_dt(emc, timing, child); - if (err) + if (err) { + of_node_put(child); return err; + } } sort(emc->timings, emc->num_timings, sizeof(*timing), cmp_timings, @@ -995,10 +997,8 @@ tegra_emc_find_node_by_ram_code(struct device_node *node, u32 ram_code) u32 value; err = of_property_read_u32(np, "nvidia,ram-code", &value); - if (err || (value != ram_code)) { - of_node_put(np); + if (err || (value != ram_code)) continue; - } return np; } diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index f3d689176fc2..589eebfc13df 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1087,7 +1087,6 @@ static int ab8500_probe(struct platform_device *pdev) "Vbus Detect (USB)", "USB ID Detect", "UART Factory Mode Detect"}; - struct ab8500_platform_data *plat = dev_get_platdata(&pdev->dev); const struct platform_device_id *platid = platform_get_device_id(pdev); enum ab8500_version version = AB8500_VERSION_UNDEFINED; struct device_node *np = pdev->dev.of_node; @@ -1219,9 +1218,6 @@ static int ab8500_probe(struct platform_device *pdev) pr_cont("None\n"); } - if (plat && plat->init) - plat->init(ab8500); - if (is_ab9540(ab8500)) { ret = get_register_interruptible(ab8500, AB8500_CHARGER, AB8500_CH_USBCH_STAT1_REG, &value); diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index b9f0010309f9..207cc497958a 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -127,45 +127,11 @@ EXPORT_SYMBOL(ab8500_sysctrl_write); static int ab8500_sysctrl_probe(struct platform_device *pdev) { - struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); - struct ab8500_platform_data *plat; - struct ab8500_sysctrl_platform_data *pdata; - - plat = dev_get_platdata(pdev->dev.parent); - - if (!plat) - return -EINVAL; - sysctrl_dev = &pdev->dev; if (!pm_power_off) pm_power_off = ab8500_power_off; - pdata = plat->sysctrl; - if (pdata) { - int last, ret, i, j; - - if (is_ab8505(ab8500)) - last = AB8500_SYSCLKREQ4RFCLKBUF; - else - last = AB8500_SYSCLKREQ8RFCLKBUF; - - for (i = AB8500_SYSCLKREQ1RFCLKBUF; i <= last; i++) { - j = i - AB8500_SYSCLKREQ1RFCLKBUF; - ret = ab8500_sysctrl_write(i, 0xff, - pdata->initial_req_buf_config[j]); - dev_dbg(&pdev->dev, - "Setting SysClkReq%dRfClkBuf 0x%X\n", - j + 1, - pdata->initial_req_buf_config[j]); - if (ret < 0) { - dev_err(&pdev->dev, - "Can't set sysClkReq%dRfClkBuf: %d\n", - j + 1, ret); - } - } - } - return 0; } diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index c0a86aeb1733..388e268b9bcf 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -3094,8 +3094,7 @@ static void db8500_prcmu_update_cpufreq(void) } } -static int db8500_prcmu_register_ab8500(struct device *parent, - struct ab8500_platform_data *pdata) +static int db8500_prcmu_register_ab8500(struct device *parent) { struct device_node *np; struct resource ab8500_resource; @@ -3103,8 +3102,6 @@ static int db8500_prcmu_register_ab8500(struct device *parent, .name = "ab8500-core", .of_compatible = "stericsson,ab8500", .id = AB8500_VERSION_AB8500, - .platform_data = pdata, - .pdata_size = sizeof(struct ab8500_platform_data), .resources = &ab8500_resource, .num_resources = 1, }; @@ -3133,7 +3130,6 @@ static int db8500_prcmu_register_ab8500(struct device *parent, static int db8500_prcmu_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - struct prcmu_pdata *pdata = dev_get_platdata(&pdev->dev); int irq = 0, err = 0; struct resource *res; @@ -3149,7 +3145,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev) return -ENOMEM; } init_prcm_registers(); - dbx500_fw_version_init(pdev, pdata->version_offset); + dbx500_fw_version_init(pdev, DB8500_PRCMU_FW_VERSION_OFFSET); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm"); if (!res) { dev_err(&pdev->dev, "no prcmu tcdm region provided\n"); @@ -3204,7 +3200,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev) } } - err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata); + err = db8500_prcmu_register_ab8500(&pdev->dev); if (err) { mfd_remove_devices(&pdev->dev); pr_err("prcmu: Failed to add ab8500 subdevice\n"); diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 7053abced0bc..3bfac539334b 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -46,6 +46,16 @@ config POWER_RESET_AXXIA Say Y if you have an Axxia family SoC. +config POWER_RESET_BRCMKONA + bool "Broadcom Kona reset driver" + depends on ARM || COMPILE_TEST + default ARCH_BCM_MOBILE + help + This driver provides restart support for Broadcom Kona chips. + + Say Y here if you have a Broadcom Kona-based board and you wish + to have restart support. + config POWER_RESET_BRCMSTB bool "Broadcom STB reset driver" depends on ARM || MIPS || COMPILE_TEST diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index d6b2560d5c4a..1be307c7fc25 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o obj-$(CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC) += at91-sama5d2_shdwc.o obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o +obj-$(CONFIG_POWER_RESET_BRCMKONA) += brcm-kona-reset.o obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o diff --git a/drivers/power/reset/brcm-kona-reset.c b/drivers/power/reset/brcm-kona-reset.c new file mode 100644 index 000000000000..8eaa959d8be6 --- /dev/null +++ b/drivers/power/reset/brcm-kona-reset.c @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2016 Broadcom + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +#define RSTMGR_REG_WR_ACCESS_OFFSET 0 +#define RSTMGR_REG_CHIP_SOFT_RST_OFFSET 4 + +#define RSTMGR_WR_PASSWORD 0xa5a5 +#define RSTMGR_WR_PASSWORD_SHIFT 8 +#define RSTMGR_WR_ACCESS_ENABLE 1 + +static void __iomem *kona_reset_base; + +static int kona_reset_handler(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + /* + * A soft reset is triggered by writing a 0 to bit 0 of the soft reset + * register. To write to that register we must first write the password + * and the enable bit in the write access enable register. + */ + writel((RSTMGR_WR_PASSWORD << RSTMGR_WR_PASSWORD_SHIFT) | + RSTMGR_WR_ACCESS_ENABLE, + kona_reset_base + RSTMGR_REG_WR_ACCESS_OFFSET); + writel(0, kona_reset_base + RSTMGR_REG_CHIP_SOFT_RST_OFFSET); + + return NOTIFY_DONE; +} + +static struct notifier_block kona_reset_nb = { + .notifier_call = kona_reset_handler, + .priority = 128, +}; + +static int kona_reset_probe(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + kona_reset_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(kona_reset_base)) + return PTR_ERR(kona_reset_base); + + return register_restart_handler(&kona_reset_nb); +} + +static const struct of_device_id of_match[] = { + { .compatible = "brcm,bcm21664-resetmgr" }, + {}, +}; + +static struct platform_driver bcm_kona_reset_driver = { + .probe = kona_reset_probe, + .driver = { + .name = "brcm-kona-reset", + .of_match_table = of_match, + }, +}; + +builtin_platform_driver(bcm_kona_reset_driver); diff --git a/drivers/pwm/pwm-clps711x.c b/drivers/pwm/pwm-clps711x.c index 7d335422cfda..26ec24e457b1 100644 --- a/drivers/pwm/pwm-clps711x.c +++ b/drivers/pwm/pwm-clps711x.c @@ -155,7 +155,7 @@ static int clps711x_pwm_remove(struct platform_device *pdev) } static const struct of_device_id __maybe_unused clps711x_pwm_dt_ids[] = { - { .compatible = "cirrus,clps711x-pwm", }, + { .compatible = "cirrus,ep7209-pwm", }, { } }; MODULE_DEVICE_TABLE(of, clps711x_pwm_dt_ids); diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c index 3e95090cd7cf..5ad42f33e70c 100644 --- a/drivers/pwm/pwm-omap-dmtimer.c +++ b/drivers/pwm/pwm-omap-dmtimer.c @@ -245,7 +245,7 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev) struct pwm_omap_dmtimer_chip *omap; struct pwm_omap_dmtimer_pdata *pdata; pwm_omap_dmtimer *dm_timer; - u32 prescaler; + u32 v; int status; pdata = dev_get_platdata(&pdev->dev); @@ -306,10 +306,12 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev) if (pm_runtime_active(&omap->dm_timer_pdev->dev)) omap->pdata->stop(omap->dm_timer); - /* setup dmtimer prescaler */ - if (!of_property_read_u32(pdev->dev.of_node, "ti,prescaler", - &prescaler)) - omap->pdata->set_prescaler(omap->dm_timer, prescaler); + if (!of_property_read_u32(pdev->dev.of_node, "ti,prescaler", &v)) + omap->pdata->set_prescaler(omap->dm_timer, v); + + /* setup dmtimer clock source */ + if (!of_property_read_u32(pdev->dev.of_node, "ti,clock-source", &v)) + omap->pdata->set_source(omap->dm_timer, v); omap->chip.dev = &pdev->dev; omap->chip.ops = &pwm_omap_dmtimer_ops; diff --git a/drivers/regulator/ab8500-ext.c b/drivers/regulator/ab8500-ext.c index 84c1ee39ddae..2ca00045eb99 100644 --- a/drivers/regulator/ab8500-ext.c +++ b/drivers/regulator/ab8500-ext.c @@ -25,6 +25,456 @@ #include #include +static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { + /* Main display, u8500 R3 uib */ + REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"), + /* Main display, u8500 uib and ST uib */ + REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"), + /* Secondary display, ST uib */ + REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"), + /* SFH7741 proximity sensor */ + REGULATOR_SUPPLY("vcc", "gpio-keys.0"), + /* BH1780GLS ambient light sensor */ + REGULATOR_SUPPLY("vcc", "2-0029"), + /* lsm303dlh accelerometer */ + REGULATOR_SUPPLY("vdd", "2-0018"), + /* lsm303dlhc accelerometer */ + REGULATOR_SUPPLY("vdd", "2-0019"), + /* lsm303dlh magnetometer */ + REGULATOR_SUPPLY("vdd", "2-001e"), + /* Rohm BU21013 Touchscreen devices */ + REGULATOR_SUPPLY("avdd", "3-005c"), + REGULATOR_SUPPLY("avdd", "3-005d"), + /* Synaptics RMI4 Touchscreen device */ + REGULATOR_SUPPLY("vdd", "3-004b"), + /* L3G4200D Gyroscope device */ + REGULATOR_SUPPLY("vdd", "2-0068"), + /* Ambient light sensor device */ + REGULATOR_SUPPLY("vdd", "3-0029"), + /* Pressure sensor device */ + REGULATOR_SUPPLY("vdd", "2-005c"), + /* Cypress TrueTouch Touchscreen device */ + REGULATOR_SUPPLY("vcpin", "spi8.0"), + /* Camera device */ + REGULATOR_SUPPLY("vaux12v5", "mmio_camera"), +}; + +static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { + /* On-board eMMC power */ + REGULATOR_SUPPLY("vmmc", "sdi4"), + /* AB8500 audio codec */ + REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"), + /* AB8500 accessory detect 1 */ + REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"), + /* AB8500 Tv-out device */ + REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"), + /* AV8100 HDMI device */ + REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"), +}; + +static struct regulator_consumer_supply ab8500_vaux3_consumers[] = { + REGULATOR_SUPPLY("v-SD-STM", "stm"), + /* External MMC slot power */ + REGULATOR_SUPPLY("vmmc", "sdi0"), +}; + +static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { + /* TV-out DENC supply */ + REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"), + /* Internal general-purpose ADC */ + REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), + /* ADC for charger */ + REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), + /* AB8500 Tv-out device */ + REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"), +}; + +static struct regulator_consumer_supply ab8500_vaud_consumers[] = { + /* AB8500 audio-codec main supply */ + REGULATOR_SUPPLY("vaud", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vamic1_consumers[] = { + /* AB8500 audio-codec Mic1 supply */ + REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vamic2_consumers[] = { + /* AB8500 audio-codec Mic2 supply */ + REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vdmic_consumers[] = { + /* AB8500 audio-codec DMic supply */ + REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { + /* SoC core supply, no device */ + REGULATOR_SUPPLY("v-intcore", NULL), + /* USB Transceiver */ + REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"), + /* Handled by abx500 clk driver */ + REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"), +}; + +static struct regulator_consumer_supply ab8500_vana_consumers[] = { + /* DB8500 DSI */ + REGULATOR_SUPPLY("vdddsi1v2", "mcde"), + REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"), + REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"), + /* DB8500 CSI */ + REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"), +}; + +/* ab8500 regulator register initialization */ +static struct ab8500_regulator_reg_init ab8500_reg_init[] = { + /* + * VanaRequestCtrl = HP/LP depending on VxRequest + * VextSupply1RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00), + /* + * VextSupply2RequestCtrl = HP/LP depending on VxRequest + * VextSupply3RequestCtrl = HP/LP depending on VxRequest + * Vaux1RequestCtrl = HP/LP depending on VxRequest + * Vaux2RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00), + /* + * Vaux3RequestCtrl = HP/LP depending on VxRequest + * SwHPReq = Control through SWValid disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00), + /* + * VanaSysClkReq1HPValid = disabled + * Vaux1SysClkReq1HPValid = disabled + * Vaux2SysClkReq1HPValid = disabled + * Vaux3SysClkReq1HPValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), + /* + * VextSupply1SysClkReq1HPValid = disabled + * VextSupply2SysClkReq1HPValid = disabled + * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40), + /* + * VanaHwHPReq1Valid = disabled + * Vaux1HwHPreq1Valid = disabled + * Vaux2HwHPReq1Valid = disabled + * Vaux3HwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00), + /* + * VextSupply1HwHPReq1Valid = disabled + * VextSupply2HwHPReq1Valid = disabled + * VextSupply3HwHPReq1Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00), + /* + * VanaHwHPReq2Valid = disabled + * Vaux1HwHPReq2Valid = disabled + * Vaux2HwHPReq2Valid = disabled + * Vaux3HwHPReq2Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00), + /* + * VextSupply1HwHPReq2Valid = disabled + * VextSupply2HwHPReq2Valid = disabled + * VextSupply3HwHPReq2Valid = HWReq2 controlled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04), + /* + * VanaSwHPReqValid = disabled + * Vaux1SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00), + /* + * Vaux2SwHPReqValid = disabled + * Vaux3SwHPReqValid = disabled + * VextSupply1SwHPReqValid = disabled + * VextSupply2SwHPReqValid = disabled + * VextSupply3SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00), + /* + * SysClkReq2Valid1 = SysClkReq2 controlled + * SysClkReq3Valid1 = disabled + * SysClkReq4Valid1 = SysClkReq4 controlled + * SysClkReq5Valid1 = disabled + * SysClkReq6Valid1 = SysClkReq6 controlled + * SysClkReq7Valid1 = disabled + * SysClkReq8Valid1 = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a), + /* + * SysClkReq2Valid2 = disabled + * SysClkReq3Valid2 = disabled + * SysClkReq4Valid2 = disabled + * SysClkReq5Valid2 = disabled + * SysClkReq6Valid2 = SysClkReq6 controlled + * SysClkReq7Valid2 = disabled + * SysClkReq8Valid2 = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20), + /* + * VTVoutEna = disabled + * Vintcore12Ena = disabled + * Vintcore12Sel = 1.25 V + * Vintcore12LP = inactive (HP) + * VTVoutLP = inactive (HP) + */ + INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10), + /* + * VaudioEna = disabled + * VdmicEna = disabled + * Vamic1Ena = disabled + * Vamic2Ena = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00), + /* + * Vamic1_dzout = high-Z when Vamic1 is disabled + * Vamic2_dzout = high-Z when Vamic2 is disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00), + /* + * VPll = Hw controlled (NOTE! PRCMU bits) + * VanaRegu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02), + /* + * VrefDDREna = disabled + * VrefDDRSleepMode = inactive (no pulldown) + */ + INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00), + /* + * VextSupply1Regu = force LP + * VextSupply2Regu = force OFF + * VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP) + * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 + * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 + */ + INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13), + /* + * Vaux1Regu = force HP + * Vaux2Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01), + /* + * Vaux3Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00), + /* + * Vaux1Sel = 2.8 V + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C), + /* + * Vaux2Sel = 2.9 V + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d), + /* + * Vaux3Sel = 2.91 V + */ + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07), + /* + * VextSupply12LP = disabled (no LP) + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00), + /* + * Vaux1Disch = short discharge time + * Vaux2Disch = short discharge time + * Vaux3Disch = short discharge time + * Vintcore12Disch = short discharge time + * VTVoutDisch = short discharge time + * VaudioDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00), + /* + * VanaDisch = short discharge time + * VdmicPullDownEna = pulldown disabled when Vdmic is disabled + * VdmicDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00), +}; + +/* AB8500 regulators */ +static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { + /* supplies to the display/camera */ + [AB8500_LDO_AUX1] = { + .supply_regulator = "ab8500-ext-supply3", + .constraints = { + .name = "V-DISPLAY", + .min_uV = 2800000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .boot_on = 1, /* display is on at boot */ + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), + .consumer_supplies = ab8500_vaux1_consumers, + }, + /* supplies to the on-board eMMC */ + [AB8500_LDO_AUX2] = { + .supply_regulator = "ab8500-ext-supply3", + .constraints = { + .name = "V-eMMC1", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), + .consumer_supplies = ab8500_vaux2_consumers, + }, + /* supply for VAUX3, supplies to SDcard slots */ + [AB8500_LDO_AUX3] = { + .supply_regulator = "ab8500-ext-supply3", + .constraints = { + .name = "V-MMC-SD", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), + .consumer_supplies = ab8500_vaux3_consumers, + }, + /* supply for tvout, gpadc, TVOUT LDO */ + [AB8500_LDO_TVOUT] = { + .constraints = { + .name = "V-TVOUT", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers), + .consumer_supplies = ab8500_vtvout_consumers, + }, + /* supply for ab8500-vaudio, VAUDIO LDO */ + [AB8500_LDO_AUDIO] = { + .constraints = { + .name = "V-AUD", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), + .consumer_supplies = ab8500_vaud_consumers, + }, + /* supply for v-anamic1 VAMic1-LDO */ + [AB8500_LDO_ANAMIC1] = { + .constraints = { + .name = "V-AMIC1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), + .consumer_supplies = ab8500_vamic1_consumers, + }, + /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ + [AB8500_LDO_ANAMIC2] = { + .constraints = { + .name = "V-AMIC2", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), + .consumer_supplies = ab8500_vamic2_consumers, + }, + /* supply for v-dmic, VDMIC LDO */ + [AB8500_LDO_DMIC] = { + .constraints = { + .name = "V-DMIC", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers), + .consumer_supplies = ab8500_vdmic_consumers, + }, + /* supply for v-intcore12, VINTCORE12 LDO */ + [AB8500_LDO_INTCORE] = { + .constraints = { + .name = "V-INTCORE", + .min_uV = 1250000, + .max_uV = 1350000, + .input_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE | + REGULATOR_CHANGE_DRMS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), + .consumer_supplies = ab8500_vintcore_consumers, + }, + /* supply for U8500 CSI-DSI, VANA LDO */ + [AB8500_LDO_ANA] = { + .constraints = { + .name = "V-CSI-DSI", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), + .consumer_supplies = ab8500_vana_consumers, + }, +}; + +/* supply for VextSupply3 */ +static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = { + /* SIM supply for 3 V SIM cards */ + REGULATOR_SUPPLY("vinvsim", "sim-detect.0"), +}; + +/* + * AB8500 external regulators + */ +static struct regulator_init_data ab8500_ext_regulators[] = { + /* fixed Vbat supplies VSMPS1_EXT_1V8 */ + [AB8500_EXT_SUPPLY1] = { + .constraints = { + .name = "ab8500-ext-supply1", + .min_uV = 1800000, + .max_uV = 1800000, + .initial_mode = REGULATOR_MODE_IDLE, + .boot_on = 1, + .always_on = 1, + }, + }, + /* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */ + [AB8500_EXT_SUPPLY2] = { + .constraints = { + .name = "ab8500-ext-supply2", + .min_uV = 1360000, + .max_uV = 1360000, + }, + }, + /* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */ + [AB8500_EXT_SUPPLY3] = { + .constraints = { + .name = "ab8500-ext-supply3", + .min_uV = 3400000, + .max_uV = 3400000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = + ARRAY_SIZE(ab8500_ext_supply3_consumers), + .consumer_supplies = ab8500_ext_supply3_consumers, + }, +}; + +static struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { + .reg_init = ab8500_reg_init, + .num_reg_init = ARRAY_SIZE(ab8500_reg_init), + .regulator = ab8500_regulators, + .num_regulator = ARRAY_SIZE(ab8500_regulators), + .ext_regulator = ab8500_ext_regulators, + .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators), +}; + /** * struct ab8500_ext_regulator_info - ab8500 regulator information * @dev: device pointer @@ -344,8 +794,7 @@ static struct of_regulator_match ab8500_ext_regulator_match[] = { static int ab8500_ext_regulator_probe(struct platform_device *pdev) { struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); - struct ab8500_platform_data *ppdata; - struct ab8500_regulator_platform_data *pdata; + struct ab8500_regulator_platform_data *pdata = &ab8500_regulator_plat_data; struct device_node *np = pdev->dev.of_node; struct regulator_config config = { }; int i, err; @@ -366,18 +815,6 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev) return -EINVAL; } - ppdata = dev_get_platdata(ab8500->dev); - if (!ppdata) { - dev_err(&pdev->dev, "null parent pdata\n"); - return -EINVAL; - } - - pdata = ppdata->regulator; - if (!pdata) { - dev_err(&pdev->dev, "null pdata\n"); - return -EINVAL; - } - /* make sure the platform data has the correct size */ if (pdata->num_ext_regulator != ARRAY_SIZE(ab8500_ext_regulator_info)) { dev_err(&pdev->dev, "Configuration error: size mismatch.\n"); diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 0b2733db0e9e..4be1b8c21f6f 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -12,8 +12,22 @@ menuconfig RESET_CONTROLLER If unsure, say no. +if RESET_CONTROLLER + config RESET_OXNAS bool +config TI_SYSCON_RESET + tristate "TI SYSCON Reset Driver" + depends on HAS_IOMEM + select MFD_SYSCON + help + This enables the reset driver support for TI devices with + memory-mapped reset registers as part of a syscon device node. If + you wish to use the reset framework for such memory-mapped devices, + say Y here. Otherwise, say N. + source "drivers/reset/sti/Kconfig" source "drivers/reset/hisilicon/Kconfig" + +endif diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index f173fc3847b4..5d65a93d3c43 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -3,9 +3,11 @@ obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o +obj-$(CONFIG_ARCH_MESON) += reset-meson.o obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o obj-$(CONFIG_ARCH_STI) += sti/ obj-$(CONFIG_ARCH_HISI) += hisilicon/ obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o obj-$(CONFIG_ATH79) += reset-ath79.o obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o +obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o diff --git a/drivers/reset/core.c b/drivers/reset/core.c index 72b32bd15549..395dc9ce492e 100644 --- a/drivers/reset/core.c +++ b/drivers/reset/core.c @@ -93,6 +93,43 @@ void reset_controller_unregister(struct reset_controller_dev *rcdev) } EXPORT_SYMBOL_GPL(reset_controller_unregister); +static void devm_reset_controller_release(struct device *dev, void *res) +{ + reset_controller_unregister(*(struct reset_controller_dev **)res); +} + +/** + * devm_reset_controller_register - resource managed reset_controller_register() + * @dev: device that is registering this reset controller + * @rcdev: a pointer to the initialized reset controller device + * + * Managed reset_controller_register(). For reset controllers registered by + * this function, reset_controller_unregister() is automatically called on + * driver detach. See reset_controller_register() for more information. + */ +int devm_reset_controller_register(struct device *dev, + struct reset_controller_dev *rcdev) +{ + struct reset_controller_dev **rcdevp; + int ret; + + rcdevp = devres_alloc(devm_reset_controller_release, sizeof(*rcdevp), + GFP_KERNEL); + if (!rcdevp) + return -ENOMEM; + + ret = reset_controller_register(rcdev); + if (!ret) { + *rcdevp = rcdev; + devres_add(dev, rcdevp); + } else { + devres_free(rcdevp); + } + + return ret; +} +EXPORT_SYMBOL_GPL(devm_reset_controller_register); + /** * reset_control_reset - reset the controlled device * @rstc: reset controller diff --git a/drivers/reset/hisilicon/hi6220_reset.c b/drivers/reset/hisilicon/hi6220_reset.c index 8f55fd4a2630..35ce53edabf9 100644 --- a/drivers/reset/hisilicon/hi6220_reset.c +++ b/drivers/reset/hisilicon/hi6220_reset.c @@ -1,7 +1,8 @@ /* * Hisilicon Hi6220 reset controller driver * - * Copyright (c) 2015 Hisilicon Limited. + * Copyright (c) 2016 Linaro Limited. + * Copyright (c) 2015-2016 Hisilicon Limited. * * Author: Feng Chen * @@ -15,81 +16,130 @@ #include #include #include +#include +#include +#include #include #include #include -#define ASSERT_OFFSET 0x300 -#define DEASSERT_OFFSET 0x304 -#define MAX_INDEX 0x509 +#define PERIPH_ASSERT_OFFSET 0x300 +#define PERIPH_DEASSERT_OFFSET 0x304 +#define PERIPH_MAX_INDEX 0x509 + +#define SC_MEDIA_RSTEN 0x052C +#define SC_MEDIA_RSTDIS 0x0530 +#define MEDIA_MAX_INDEX 8 #define to_reset_data(x) container_of(x, struct hi6220_reset_data, rc_dev) -struct hi6220_reset_data { - void __iomem *assert_base; - void __iomem *deassert_base; - struct reset_controller_dev rc_dev; +enum hi6220_reset_ctrl_type { + PERIPHERAL, + MEDIA, }; -static int hi6220_reset_assert(struct reset_controller_dev *rc_dev, +struct hi6220_reset_data { + struct reset_controller_dev rc_dev; + struct regmap *regmap; +}; + +static int hi6220_peripheral_assert(struct reset_controller_dev *rc_dev, + unsigned long idx) +{ + struct hi6220_reset_data *data = to_reset_data(rc_dev); + struct regmap *regmap = data->regmap; + u32 bank = idx >> 8; + u32 offset = idx & 0xff; + u32 reg = PERIPH_ASSERT_OFFSET + bank * 0x10; + + return regmap_write(regmap, reg, BIT(offset)); +} + +static int hi6220_peripheral_deassert(struct reset_controller_dev *rc_dev, + unsigned long idx) +{ + struct hi6220_reset_data *data = to_reset_data(rc_dev); + struct regmap *regmap = data->regmap; + u32 bank = idx >> 8; + u32 offset = idx & 0xff; + u32 reg = PERIPH_DEASSERT_OFFSET + bank * 0x10; + + return regmap_write(regmap, reg, BIT(offset)); +} + +static const struct reset_control_ops hi6220_peripheral_reset_ops = { + .assert = hi6220_peripheral_assert, + .deassert = hi6220_peripheral_deassert, +}; + +static int hi6220_media_assert(struct reset_controller_dev *rc_dev, unsigned long idx) { struct hi6220_reset_data *data = to_reset_data(rc_dev); + struct regmap *regmap = data->regmap; - int bank = idx >> 8; - int offset = idx & 0xff; - - writel(BIT(offset), data->assert_base + (bank * 0x10)); - - return 0; + return regmap_write(regmap, SC_MEDIA_RSTEN, BIT(idx)); } -static int hi6220_reset_deassert(struct reset_controller_dev *rc_dev, +static int hi6220_media_deassert(struct reset_controller_dev *rc_dev, unsigned long idx) { struct hi6220_reset_data *data = to_reset_data(rc_dev); + struct regmap *regmap = data->regmap; - int bank = idx >> 8; - int offset = idx & 0xff; - - writel(BIT(offset), data->deassert_base + (bank * 0x10)); - - return 0; + return regmap_write(regmap, SC_MEDIA_RSTDIS, BIT(idx)); } -static const struct reset_control_ops hi6220_reset_ops = { - .assert = hi6220_reset_assert, - .deassert = hi6220_reset_deassert, +static const struct reset_control_ops hi6220_media_reset_ops = { + .assert = hi6220_media_assert, + .deassert = hi6220_media_deassert, }; static int hi6220_reset_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + enum hi6220_reset_ctrl_type type; struct hi6220_reset_data *data; - struct resource *res; - void __iomem *src_base; + struct regmap *regmap; - data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - src_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(src_base)) - return PTR_ERR(src_base); + type = (enum hi6220_reset_ctrl_type)of_device_get_match_data(dev); - data->assert_base = src_base + ASSERT_OFFSET; - data->deassert_base = src_base + DEASSERT_OFFSET; - data->rc_dev.nr_resets = MAX_INDEX; - data->rc_dev.ops = &hi6220_reset_ops; - data->rc_dev.of_node = pdev->dev.of_node; + regmap = syscon_node_to_regmap(np); + if (IS_ERR(regmap)) { + dev_err(dev, "failed to get reset controller regmap\n"); + return PTR_ERR(regmap); + } + + data->regmap = regmap; + data->rc_dev.of_node = np; + if (type == MEDIA) { + data->rc_dev.ops = &hi6220_media_reset_ops; + data->rc_dev.nr_resets = MEDIA_MAX_INDEX; + } else { + data->rc_dev.ops = &hi6220_peripheral_reset_ops; + data->rc_dev.nr_resets = PERIPH_MAX_INDEX; + } return reset_controller_register(&data->rc_dev); } static const struct of_device_id hi6220_reset_match[] = { - { .compatible = "hisilicon,hi6220-sysctrl" }, - { }, + { + .compatible = "hisilicon,hi6220-sysctrl", + .data = (void *)PERIPHERAL, + }, + { + .compatible = "hisilicon,hi6220-mediactrl", + .data = (void *)MEDIA, + }, + { /* sentinel */ }, }; +MODULE_DEVICE_TABLE(of, hi6220_reset_match); static struct platform_driver hi6220_reset_driver = { .probe = hi6220_reset_probe, diff --git a/drivers/reset/reset-ath79.c b/drivers/reset/reset-ath79.c index ccb940a8d9fb..16d410cd6146 100644 --- a/drivers/reset/reset-ath79.c +++ b/drivers/reset/reset-ath79.c @@ -112,7 +112,7 @@ static int ath79_reset_probe(struct platform_device *pdev) ath79_reset->rcdev.of_reset_n_cells = 1; ath79_reset->rcdev.nr_resets = 32; - err = reset_controller_register(&ath79_reset->rcdev); + err = devm_reset_controller_register(&pdev->dev, &ath79_reset->rcdev); if (err) return err; @@ -131,7 +131,6 @@ static int ath79_reset_remove(struct platform_device *pdev) struct ath79_reset *ath79_reset = platform_get_drvdata(pdev); unregister_restart_handler(&ath79_reset->restart_nb); - reset_controller_unregister(&ath79_reset->rcdev); return 0; } diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c new file mode 100644 index 000000000000..c32f11a30c5f --- /dev/null +++ b/drivers/reset/reset-meson.c @@ -0,0 +1,136 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * BSD LICENSE + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_COUNT 8 +#define BITS_PER_REG 32 + +struct meson_reset { + void __iomem *reg_base; + struct reset_controller_dev rcdev; +}; + +static int meson_reset_reset(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct meson_reset *data = + container_of(rcdev, struct meson_reset, rcdev); + unsigned int bank = id / BITS_PER_REG; + unsigned int offset = id % BITS_PER_REG; + void __iomem *reg_addr = data->reg_base + (bank << 2); + + if (bank >= REG_COUNT) + return -EINVAL; + + writel(BIT(offset), reg_addr); + + return 0; +} + +static const struct reset_control_ops meson_reset_ops = { + .reset = meson_reset_reset, +}; + +static const struct of_device_id meson_reset_dt_ids[] = { + { .compatible = "amlogic,meson8b-reset", }, + { .compatible = "amlogic,meson-gxbb-reset", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, meson_reset_dt_ids); + +static int meson_reset_probe(struct platform_device *pdev) +{ + struct meson_reset *data; + struct resource *res; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(data->reg_base)) + return PTR_ERR(data->reg_base); + + platform_set_drvdata(pdev, data); + + data->rcdev.owner = THIS_MODULE; + data->rcdev.nr_resets = REG_COUNT * BITS_PER_REG; + data->rcdev.ops = &meson_reset_ops; + data->rcdev.of_node = pdev->dev.of_node; + + return devm_reset_controller_register(&pdev->dev, &data->rcdev); +} + +static struct platform_driver meson_reset_driver = { + .probe = meson_reset_probe, + .driver = { + .name = "meson_reset", + .of_match_table = meson_reset_dt_ids, + }, +}; + +module_platform_driver(meson_reset_driver); + +MODULE_AUTHOR("Neil Armstrong "); +MODULE_DESCRIPTION("Amlogic Meson Reset Controller driver"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/reset/reset-oxnas.c b/drivers/reset/reset-oxnas.c index c60fb2dace3e..944980572f79 100644 --- a/drivers/reset/reset-oxnas.c +++ b/drivers/reset/reset-oxnas.c @@ -112,21 +112,11 @@ static int oxnas_reset_probe(struct platform_device *pdev) data->rcdev.ops = &oxnas_reset_ops; data->rcdev.of_node = pdev->dev.of_node; - return reset_controller_register(&data->rcdev); -} - -static int oxnas_reset_remove(struct platform_device *pdev) -{ - struct oxnas_reset *data = platform_get_drvdata(pdev); - - reset_controller_unregister(&data->rcdev); - - return 0; + return devm_reset_controller_register(&pdev->dev, &data->rcdev); } static struct platform_driver oxnas_reset_driver = { .probe = oxnas_reset_probe, - .remove = oxnas_reset_remove, .driver = { .name = "oxnas-reset", .of_match_table = oxnas_reset_dt_ids, diff --git a/drivers/reset/reset-pistachio.c b/drivers/reset/reset-pistachio.c index 72a97a15a4c8..bbc4c06dd33b 100644 --- a/drivers/reset/reset-pistachio.c +++ b/drivers/reset/reset-pistachio.c @@ -121,16 +121,7 @@ static int pistachio_reset_probe(struct platform_device *pdev) rd->rcdev.ops = &pistachio_reset_ops; rd->rcdev.of_node = np; - return reset_controller_register(&rd->rcdev); -} - -static int pistachio_reset_remove(struct platform_device *pdev) -{ - struct pistachio_reset_data *data = platform_get_drvdata(pdev); - - reset_controller_unregister(&data->rcdev); - - return 0; + return devm_reset_controller_register(dev, &rd->rcdev); } static const struct of_device_id pistachio_reset_dt_ids[] = { @@ -141,7 +132,6 @@ MODULE_DEVICE_TABLE(of, pistachio_reset_dt_ids); static struct platform_driver pistachio_reset_driver = { .probe = pistachio_reset_probe, - .remove = pistachio_reset_remove, .driver = { .name = "pistachio-reset", .of_match_table = pistachio_reset_dt_ids, diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c index cd05a7032b17..12add9b0fa49 100644 --- a/drivers/reset/reset-socfpga.c +++ b/drivers/reset/reset-socfpga.c @@ -134,16 +134,7 @@ static int socfpga_reset_probe(struct platform_device *pdev) data->rcdev.ops = &socfpga_reset_ops; data->rcdev.of_node = pdev->dev.of_node; - return reset_controller_register(&data->rcdev); -} - -static int socfpga_reset_remove(struct platform_device *pdev) -{ - struct socfpga_reset_data *data = platform_get_drvdata(pdev); - - reset_controller_unregister(&data->rcdev); - - return 0; + return devm_reset_controller_register(dev, &data->rcdev); } static const struct of_device_id socfpga_reset_dt_ids[] = { @@ -153,7 +144,6 @@ static const struct of_device_id socfpga_reset_dt_ids[] = { static struct platform_driver socfpga_reset_driver = { .probe = socfpga_reset_probe, - .remove = socfpga_reset_remove, .driver = { .name = "socfpga-reset", .of_match_table = socfpga_reset_dt_ids, diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c index 677f86555212..3080190b3f90 100644 --- a/drivers/reset/reset-sunxi.c +++ b/drivers/reset/reset-sunxi.c @@ -165,21 +165,11 @@ static int sunxi_reset_probe(struct platform_device *pdev) data->rcdev.ops = &sunxi_reset_ops; data->rcdev.of_node = pdev->dev.of_node; - return reset_controller_register(&data->rcdev); -} - -static int sunxi_reset_remove(struct platform_device *pdev) -{ - struct sunxi_reset_data *data = platform_get_drvdata(pdev); - - reset_controller_unregister(&data->rcdev); - - return 0; + return devm_reset_controller_register(&pdev->dev, &data->rcdev); } static struct platform_driver sunxi_reset_driver = { .probe = sunxi_reset_probe, - .remove = sunxi_reset_remove, .driver = { .name = "sunxi-reset", .of_match_table = sunxi_reset_dt_ids, diff --git a/drivers/reset/reset-ti-syscon.c b/drivers/reset/reset-ti-syscon.c new file mode 100644 index 000000000000..47f0ffd3b013 --- /dev/null +++ b/drivers/reset/reset-ti-syscon.c @@ -0,0 +1,237 @@ +/* + * TI SYSCON regmap reset driver + * + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis + * Suman Anna + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#include + +/** + * struct ti_syscon_reset_control - reset control structure + * @assert_offset: reset assert control register offset from syscon base + * @assert_bit: reset assert bit in the reset assert control register + * @deassert_offset: reset deassert control register offset from syscon base + * @deassert_bit: reset deassert bit in the reset deassert control register + * @status_offset: reset status register offset from syscon base + * @status_bit: reset status bit in the reset status register + * @flags: reset flag indicating how the (de)assert and status are handled + */ +struct ti_syscon_reset_control { + unsigned int assert_offset; + unsigned int assert_bit; + unsigned int deassert_offset; + unsigned int deassert_bit; + unsigned int status_offset; + unsigned int status_bit; + u32 flags; +}; + +/** + * struct ti_syscon_reset_data - reset controller information structure + * @rcdev: reset controller entity + * @regmap: regmap handle containing the memory-mapped reset registers + * @controls: array of reset controls + * @nr_controls: number of controls in control array + */ +struct ti_syscon_reset_data { + struct reset_controller_dev rcdev; + struct regmap *regmap; + struct ti_syscon_reset_control *controls; + unsigned int nr_controls; +}; + +#define to_ti_syscon_reset_data(rcdev) \ + container_of(rcdev, struct ti_syscon_reset_data, rcdev) + +/** + * ti_syscon_reset_assert() - assert device reset + * @rcdev: reset controller entity + * @id: ID of the reset to be asserted + * + * This function implements the reset driver op to assert a device's reset. + * This asserts the reset in a manner prescribed by the reset flags. + * + * Return: 0 for successful request, else a corresponding error value + */ +static int ti_syscon_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev); + struct ti_syscon_reset_control *control; + unsigned int mask, value; + + if (id >= data->nr_controls) + return -EINVAL; + + control = &data->controls[id]; + + if (control->flags & ASSERT_NONE) + return -ENOTSUPP; /* assert not supported for this reset */ + + mask = BIT(control->assert_bit); + value = (control->flags & ASSERT_SET) ? mask : 0x0; + + return regmap_update_bits(data->regmap, control->assert_offset, mask, value); +} + +/** + * ti_syscon_reset_deassert() - deassert device reset + * @rcdev: reset controller entity + * @id: ID of reset to be deasserted + * + * This function implements the reset driver op to deassert a device's reset. + * This deasserts the reset in a manner prescribed by the reset flags. + * + * Return: 0 for successful request, else a corresponding error value + */ +static int ti_syscon_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev); + struct ti_syscon_reset_control *control; + unsigned int mask, value; + + if (id >= data->nr_controls) + return -EINVAL; + + control = &data->controls[id]; + + if (control->flags & DEASSERT_NONE) + return -ENOTSUPP; /* deassert not supported for this reset */ + + mask = BIT(control->deassert_bit); + value = (control->flags & DEASSERT_SET) ? mask : 0x0; + + return regmap_update_bits(data->regmap, control->deassert_offset, mask, value); +} + +/** + * ti_syscon_reset_status() - check device reset status + * @rcdev: reset controller entity + * @id: ID of the reset for which the status is being requested + * + * This function implements the reset driver op to return the status of a + * device's reset. + * + * Return: 0 if reset is deasserted, true if reset is asserted, else a + * corresponding error value + */ +static int ti_syscon_reset_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev); + struct ti_syscon_reset_control *control; + unsigned int reset_state; + int ret; + + if (id >= data->nr_controls) + return -EINVAL; + + control = &data->controls[id]; + + if (control->flags & STATUS_NONE) + return -ENOTSUPP; /* status not supported for this reset */ + + ret = regmap_read(data->regmap, control->status_offset, &reset_state); + if (ret) + return ret; + + return (reset_state & BIT(control->status_bit)) && + (control->flags & STATUS_SET); +} + +static struct reset_control_ops ti_syscon_reset_ops = { + .assert = ti_syscon_reset_assert, + .deassert = ti_syscon_reset_deassert, + .status = ti_syscon_reset_status, +}; + +static int ti_syscon_reset_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct ti_syscon_reset_data *data; + struct regmap *regmap; + const __be32 *list; + struct ti_syscon_reset_control *controls; + int size, nr_controls, i; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + regmap = syscon_node_to_regmap(np->parent); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + list = of_get_property(np, "ti,reset-bits", &size); + if (!list || (size / sizeof(*list)) % 7 != 0) { + dev_err(dev, "invalid DT reset description\n"); + return -EINVAL; + } + + nr_controls = (size / sizeof(*list)) / 7; + controls = devm_kzalloc(dev, nr_controls * sizeof(*controls), GFP_KERNEL); + if (!controls) + return -ENOMEM; + + for (i = 0; i < nr_controls; i++) { + controls[i].assert_offset = be32_to_cpup(list++); + controls[i].assert_bit = be32_to_cpup(list++); + controls[i].deassert_offset = be32_to_cpup(list++); + controls[i].deassert_bit = be32_to_cpup(list++); + controls[i].status_offset = be32_to_cpup(list++); + controls[i].status_bit = be32_to_cpup(list++); + controls[i].flags = be32_to_cpup(list++); + } + + data->rcdev.ops = &ti_syscon_reset_ops; + data->rcdev.owner = THIS_MODULE; + data->rcdev.of_node = np; + data->rcdev.nr_resets = nr_controls; + data->regmap = regmap; + data->controls = controls; + data->nr_controls = nr_controls; + + platform_set_drvdata(pdev, data); + + return devm_reset_controller_register(dev, &data->rcdev); +} + +static const struct of_device_id ti_syscon_reset_of_match[] = { + { .compatible = "ti,syscon-reset", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, ti_syscon_reset_of_match); + +static struct platform_driver ti_syscon_reset_driver = { + .probe = ti_syscon_reset_probe, + .driver = { + .name = "ti-syscon-reset", + .of_match_table = ti_syscon_reset_of_match, + }, +}; +module_platform_driver(ti_syscon_reset_driver); + +MODULE_AUTHOR("Andrew F. Davis "); +MODULE_AUTHOR("Suman Anna "); +MODULE_DESCRIPTION("TI SYSCON Regmap Reset Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/reset/reset-zynq.c b/drivers/reset/reset-zynq.c index a7e87bc45885..138f2f205662 100644 --- a/drivers/reset/reset-zynq.c +++ b/drivers/reset/reset-zynq.c @@ -122,16 +122,7 @@ static int zynq_reset_probe(struct platform_device *pdev) priv->rcdev.ops = &zynq_reset_ops; priv->rcdev.of_node = pdev->dev.of_node; - return reset_controller_register(&priv->rcdev); -} - -static int zynq_reset_remove(struct platform_device *pdev) -{ - struct zynq_reset_data *priv = platform_get_drvdata(pdev); - - reset_controller_unregister(&priv->rcdev); - - return 0; + return devm_reset_controller_register(&pdev->dev, &priv->rcdev); } static const struct of_device_id zynq_reset_dt_ids[] = { @@ -141,7 +132,6 @@ static const struct of_device_id zynq_reset_dt_ids[] = { static struct platform_driver zynq_reset_driver = { .probe = zynq_reset_probe, - .remove = zynq_reset_remove, .driver = { .name = KBUILD_MODNAME, .of_match_table = zynq_reset_dt_ids, diff --git a/drivers/reset/sti/Kconfig b/drivers/reset/sti/Kconfig index f8c15a37fb35..613178553612 100644 --- a/drivers/reset/sti/Kconfig +++ b/drivers/reset/sti/Kconfig @@ -2,7 +2,6 @@ if ARCH_STI config STI_RESET_SYSCFG bool - select RESET_CONTROLLER config STIH415_RESET bool diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig index cb58ef0d9b2c..fe42a2fdf351 100644 --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -1,7 +1,6 @@ menu "SOC (System On Chip) specific Drivers" source "drivers/soc/bcm/Kconfig" -source "drivers/soc/brcmstb/Kconfig" source "drivers/soc/fsl/qe/Kconfig" source "drivers/soc/mediatek/Kconfig" source "drivers/soc/qcom/Kconfig" @@ -10,6 +9,7 @@ source "drivers/soc/samsung/Kconfig" source "drivers/soc/sunxi/Kconfig" source "drivers/soc/tegra/Kconfig" source "drivers/soc/ti/Kconfig" +source "drivers/soc/ux500/Kconfig" source "drivers/soc/versatile/Kconfig" endmenu diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index 380230f03874..50c23d0bd457 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -3,7 +3,6 @@ # obj-y += bcm/ -obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/ obj-$(CONFIG_ARCH_DOVE) += dove/ obj-$(CONFIG_MACH_DOVE) += dove/ obj-y += fsl/ @@ -15,4 +14,5 @@ obj-$(CONFIG_SOC_SAMSUNG) += samsung/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_SOC_TI) += ti/ +obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_PLAT_VERSATILE) += versatile/ diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig index 3066edea184d..a39b0d58ddd0 100644 --- a/drivers/soc/bcm/Kconfig +++ b/drivers/soc/bcm/Kconfig @@ -1,9 +1,23 @@ +menu "Broadcom SoC drivers" + config RASPBERRYPI_POWER bool "Raspberry Pi power domain driver" - depends on ARCH_BCM2835 || COMPILE_TEST + depends on ARCH_BCM2835 || (COMPILE_TEST && OF) depends on RASPBERRYPI_FIRMWARE=y select PM_GENERIC_DOMAINS if PM - select PM_GENERIC_DOMAINS_OF if PM help This enables support for the RPi power domains which can be enabled or disabled via the RPi firmware. + +config SOC_BRCMSTB + bool "Broadcom STB SoC drivers" + depends on ARM + select SOC_BUS + help + Enables drivers for the Broadcom Set-Top Box (STB) series of chips. + This option alone enables only some support code, while the drivers + can be enabled individually within this menu. + + If unsure, say N. + +endmenu diff --git a/drivers/soc/bcm/Makefile b/drivers/soc/bcm/Makefile index 63aa3eb23087..dc4fced72d21 100644 --- a/drivers/soc/bcm/Makefile +++ b/drivers/soc/bcm/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o +obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/ diff --git a/drivers/soc/brcmstb/Makefile b/drivers/soc/bcm/brcmstb/Makefile similarity index 100% rename from drivers/soc/brcmstb/Makefile rename to drivers/soc/bcm/brcmstb/Makefile diff --git a/drivers/soc/brcmstb/biuctrl.c b/drivers/soc/bcm/brcmstb/biuctrl.c similarity index 98% rename from drivers/soc/brcmstb/biuctrl.c rename to drivers/soc/bcm/brcmstb/biuctrl.c index 9049c076f9a1..3c39415d484f 100644 --- a/drivers/soc/brcmstb/biuctrl.c +++ b/drivers/soc/bcm/brcmstb/biuctrl.c @@ -19,6 +19,7 @@ #include #include #include +#include #define CPU_CREDIT_REG_OFFSET 0x184 #define CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK 0x70000000 diff --git a/drivers/soc/brcmstb/common.c b/drivers/soc/bcm/brcmstb/common.c similarity index 100% rename from drivers/soc/brcmstb/common.c rename to drivers/soc/bcm/brcmstb/common.c diff --git a/drivers/soc/brcmstb/Kconfig b/drivers/soc/brcmstb/Kconfig deleted file mode 100644 index 7fec3b4c80a1..000000000000 --- a/drivers/soc/brcmstb/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -menuconfig SOC_BRCMSTB - bool "Broadcom STB SoC drivers" - depends on ARM - select SOC_BUS - help - Enables drivers for the Broadcom Set-Top Box (STB) series of chips. - This option alone enables only some support code, while the drivers - can be enabled individually within this menu. - - If unsure, say N. diff --git a/drivers/soc/qcom/smem_state.c b/drivers/soc/qcom/smem_state.c index 54261decb369..d5437ca76ed9 100644 --- a/drivers/soc/qcom/smem_state.c +++ b/drivers/soc/qcom/smem_state.c @@ -104,26 +104,26 @@ struct qcom_smem_state *qcom_smem_state_get(struct device *dev, if (con_id) { index = of_property_match_string(dev->of_node, - "qcom,state-names", + "qcom,smem-state-names", con_id); if (index < 0) { - dev_err(dev, "missing qcom,state-names\n"); + dev_err(dev, "missing qcom,smem-state-names\n"); return ERR_PTR(index); } } ret = of_parse_phandle_with_args(dev->of_node, - "qcom,state", - "#qcom,state-cells", + "qcom,smem-states", + "#qcom,smem-state-cells", index, &args); if (ret) { - dev_err(dev, "failed to parse qcom,state property\n"); + dev_err(dev, "failed to parse qcom,smem-states property\n"); return ERR_PTR(ret); } if (args.args_count != 1) { - dev_err(dev, "invalid #qcom,state-cells\n"); + dev_err(dev, "invalid #qcom,smem-state-cells\n"); return ERR_PTR(-EINVAL); } diff --git a/drivers/soc/qcom/smp2p.c b/drivers/soc/qcom/smp2p.c index f1eed7f9dd67..f51fb2ea7200 100644 --- a/drivers/soc/qcom/smp2p.c +++ b/drivers/soc/qcom/smp2p.c @@ -196,7 +196,7 @@ static irqreturn_t qcom_smp2p_intr(int irq, void *data) /* Match newly created entries */ for (i = smp2p->valid_entries; i < in->valid_entries; i++) { list_for_each_entry(entry, &smp2p->inbound, node) { - memcpy_fromio(buf, in->entries[i].name, sizeof(buf)); + memcpy(buf, in->entries[i].name, sizeof(buf)); if (!strcmp(buf, entry->name)) { entry->value = &in->entries[i].value; break; @@ -343,12 +343,13 @@ static int qcom_smp2p_outbound_entry(struct qcom_smp2p *smp2p, /* Allocate an entry from the smem item */ strlcpy(buf, entry->name, SMP2P_MAX_ENTRY_NAME); - memcpy_toio(out->entries[out->valid_entries].name, buf, SMP2P_MAX_ENTRY_NAME); - out->valid_entries++; + memcpy(out->entries[out->valid_entries].name, buf, SMP2P_MAX_ENTRY_NAME); /* Make the logical entry reference the physical value */ entry->value = &out->entries[out->valid_entries].value; + out->valid_entries++; + entry->state = qcom_smem_state_register(node, &smp2p_state_ops, entry); if (IS_ERR(entry->state)) { dev_err(smp2p->dev, "failed to register qcom_smem_state\n"); diff --git a/drivers/soc/qcom/smsm.c b/drivers/soc/qcom/smsm.c index 6b777af1bc19..d0337b2a71c8 100644 --- a/drivers/soc/qcom/smsm.c +++ b/drivers/soc/qcom/smsm.c @@ -495,7 +495,7 @@ static int qcom_smsm_probe(struct platform_device *pdev) if (!smsm->hosts) return -ENOMEM; - local_node = of_find_node_with_property(pdev->dev.of_node, "#qcom,state-cells"); + local_node = of_find_node_with_property(pdev->dev.of_node, "#qcom,smem-state-cells"); if (!local_node) { dev_err(&pdev->dev, "no state entry\n"); return -EINVAL; diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c index c544f3d2c6ee..520aedd29965 100644 --- a/drivers/soc/qcom/wcnss_ctrl.c +++ b/drivers/soc/qcom/wcnss_ctrl.c @@ -1,4 +1,5 @@ /* + * Copyright (c) 2016, Linaro Ltd. * Copyright (c) 2015, Sony Mobile Communications Inc. * * This program is free software; you can redistribute it and/or modify @@ -14,8 +15,16 @@ #include #include #include +#include +#include +#include +#include #define WCNSS_REQUEST_TIMEOUT (5 * HZ) +#define WCNSS_CBC_TIMEOUT (10 * HZ) + +#define WCNSS_ACK_DONE_BOOTING 1 +#define WCNSS_ACK_COLD_BOOTING 2 #define NV_FRAGMENT_SIZE 3072 #define NVBIN_FILE "wlan/prima/WCNSS_qcom_wlan_nv.bin" @@ -25,17 +34,19 @@ * @dev: device handle * @channel: SMD channel handle * @ack: completion for outstanding requests + * @cbc: completion for cbc complete indication * @ack_status: status of the outstanding request - * @download_nv_work: worker for uploading nv binary + * @probe_work: worker for uploading nv binary */ struct wcnss_ctrl { struct device *dev; struct qcom_smd_channel *channel; struct completion ack; + struct completion cbc; int ack_status; - struct work_struct download_nv_work; + struct work_struct probe_work; }; /* message types */ @@ -48,6 +59,11 @@ enum { WCNSS_UPLOAD_CAL_RESP, WCNSS_DOWNLOAD_CAL_REQ, WCNSS_DOWNLOAD_CAL_RESP, + WCNSS_VBAT_LEVEL_IND, + WCNSS_BUILD_VERSION_REQ, + WCNSS_BUILD_VERSION_RESP, + WCNSS_PM_CONFIG_REQ, + WCNSS_CBC_COMPLETE_IND, }; /** @@ -128,7 +144,7 @@ static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel, version->major, version->minor, version->version, version->revision); - schedule_work(&wcnss->download_nv_work); + complete(&wcnss->ack); break; case WCNSS_DOWNLOAD_NV_RESP: if (count != sizeof(*nvresp)) { @@ -141,6 +157,10 @@ static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel, wcnss->ack_status = nvresp->status; complete(&wcnss->ack); break; + case WCNSS_CBC_COMPLETE_IND: + dev_dbg(wcnss->dev, "cold boot complete\n"); + complete(&wcnss->cbc); + break; default: dev_info(wcnss->dev, "unknown message type %d\n", hdr->type); break; @@ -156,20 +176,32 @@ static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel, static int wcnss_request_version(struct wcnss_ctrl *wcnss) { struct wcnss_msg_hdr msg; + int ret; msg.type = WCNSS_VERSION_REQ; msg.len = sizeof(msg); + ret = qcom_smd_send(wcnss->channel, &msg, sizeof(msg)); + if (ret < 0) + return ret; - return qcom_smd_send(wcnss->channel, &msg, sizeof(msg)); + ret = wait_for_completion_timeout(&wcnss->ack, WCNSS_CBC_TIMEOUT); + if (!ret) { + dev_err(wcnss->dev, "timeout waiting for version response\n"); + return -ETIMEDOUT; + } + + return 0; } /** * wcnss_download_nv() - send nv binary to WCNSS - * @work: work struct to acquire wcnss context + * @wcnss: wcnss_ctrl state handle + * @expect_cbc: indicator to caller that an cbc event is expected + * + * Returns 0 on success. Negative errno on failure. */ -static void wcnss_download_nv(struct work_struct *work) +static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc) { - struct wcnss_ctrl *wcnss = container_of(work, struct wcnss_ctrl, download_nv_work); struct wcnss_download_nv_req *req; const struct firmware *fw; const void *data; @@ -178,10 +210,10 @@ static void wcnss_download_nv(struct work_struct *work) req = kzalloc(sizeof(*req) + NV_FRAGMENT_SIZE, GFP_KERNEL); if (!req) - return; + return -ENOMEM; ret = request_firmware(&fw, NVBIN_FILE, wcnss->dev); - if (ret) { + if (ret < 0) { dev_err(wcnss->dev, "Failed to load nv file %s: %d\n", NVBIN_FILE, ret); goto free_req; @@ -207,7 +239,7 @@ static void wcnss_download_nv(struct work_struct *work) memcpy(req->fragment, data, req->frag_size); ret = qcom_smd_send(wcnss->channel, req, req->hdr.len); - if (ret) { + if (ret < 0) { dev_err(wcnss->dev, "failed to send smd packet\n"); goto release_fw; } @@ -220,16 +252,58 @@ static void wcnss_download_nv(struct work_struct *work) } while (left > 0); ret = wait_for_completion_timeout(&wcnss->ack, WCNSS_REQUEST_TIMEOUT); - if (!ret) + if (!ret) { dev_err(wcnss->dev, "timeout waiting for nv upload ack\n"); - else if (wcnss->ack_status != 1) - dev_err(wcnss->dev, "nv upload response failed err: %d\n", - wcnss->ack_status); + ret = -ETIMEDOUT; + } else { + *expect_cbc = wcnss->ack_status == WCNSS_ACK_COLD_BOOTING; + ret = 0; + } release_fw: release_firmware(fw); free_req: kfree(req); + + return ret; +} + +/** + * qcom_wcnss_open_channel() - open additional SMD channel to WCNSS + * @wcnss: wcnss handle, retrieved from drvdata + * @name: SMD channel name + * @cb: callback to handle incoming data on the channel + */ +struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb) +{ + struct wcnss_ctrl *_wcnss = wcnss; + + return qcom_smd_open_channel(_wcnss->channel, name, cb); +} +EXPORT_SYMBOL(qcom_wcnss_open_channel); + +static void wcnss_async_probe(struct work_struct *work) +{ + struct wcnss_ctrl *wcnss = container_of(work, struct wcnss_ctrl, probe_work); + bool expect_cbc; + int ret; + + ret = wcnss_request_version(wcnss); + if (ret < 0) + return; + + ret = wcnss_download_nv(wcnss, &expect_cbc); + if (ret < 0) + return; + + /* Wait for pending cold boot completion if indicated by the nv downloader */ + if (expect_cbc) { + ret = wait_for_completion_timeout(&wcnss->cbc, WCNSS_REQUEST_TIMEOUT); + if (!ret) + dev_err(wcnss->dev, "expected cold boot completion\n"); + } + + of_platform_populate(wcnss->dev->of_node, NULL, NULL, wcnss->dev); } static int wcnss_ctrl_probe(struct qcom_smd_device *sdev) @@ -244,25 +318,38 @@ static int wcnss_ctrl_probe(struct qcom_smd_device *sdev) wcnss->channel = sdev->channel; init_completion(&wcnss->ack); - INIT_WORK(&wcnss->download_nv_work, wcnss_download_nv); + init_completion(&wcnss->cbc); + INIT_WORK(&wcnss->probe_work, wcnss_async_probe); qcom_smd_set_drvdata(sdev->channel, wcnss); + dev_set_drvdata(&sdev->dev, wcnss); - return wcnss_request_version(wcnss); + schedule_work(&wcnss->probe_work); + + return 0; } -static const struct qcom_smd_id wcnss_ctrl_smd_match[] = { - { .name = "WCNSS_CTRL" }, +static void wcnss_ctrl_remove(struct qcom_smd_device *sdev) +{ + struct wcnss_ctrl *wcnss = qcom_smd_get_drvdata(sdev->channel); + + cancel_work_sync(&wcnss->probe_work); + of_platform_depopulate(&sdev->dev); +} + +static const struct of_device_id wcnss_ctrl_of_match[] = { + { .compatible = "qcom,wcnss", }, {} }; static struct qcom_smd_driver wcnss_ctrl_driver = { .probe = wcnss_ctrl_probe, + .remove = wcnss_ctrl_remove, .callback = wcnss_ctrl_smd_callback, - .smd_match_table = wcnss_ctrl_smd_match, .driver = { .name = "qcom_wcnss_ctrl", .owner = THIS_MODULE, + .of_match_table = wcnss_ctrl_of_match, }, }; diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig index d7fc123006a3..245533907d1b 100644 --- a/drivers/soc/samsung/Kconfig +++ b/drivers/soc/samsung/Kconfig @@ -10,4 +10,8 @@ config EXYNOS_PMU bool "Exynos PMU controller driver" if COMPILE_TEST depends on (ARM && ARCH_EXYNOS) || ((ARM || ARM64) && COMPILE_TEST) +config EXYNOS_PM_DOMAINS + bool "Exynos PM domains" if COMPILE_TEST + depends on PM_GENERIC_DOMAINS || COMPILE_TEST + endif diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile index f64ac4d80564..3619f2ecddaa 100644 --- a/drivers/soc/samsung/Makefile +++ b/drivers/soc/samsung/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o exynos3250-pmu.o exynos4-pmu.o \ exynos5250-pmu.o exynos5420-pmu.o +obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o diff --git a/drivers/soc/samsung/exynos3250-pmu.c b/drivers/soc/samsung/exynos3250-pmu.c index 20b3ab8aa790..af2f54e14b83 100644 --- a/drivers/soc/samsung/exynos3250-pmu.c +++ b/drivers/soc/samsung/exynos3250-pmu.c @@ -14,7 +14,7 @@ #include "exynos-pmu.h" -static struct exynos_pmu_conf exynos3250_pmu_config[] = { +static const struct exynos_pmu_conf exynos3250_pmu_config[] = { /* { .offset = offset, .val = { AFTR, W-AFTR, SLEEP } */ { EXYNOS3_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, { EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, diff --git a/drivers/soc/samsung/exynos5420-pmu.c b/drivers/soc/samsung/exynos5420-pmu.c index b962fb6a5d22..3f2c64180ef8 100644 --- a/drivers/soc/samsung/exynos5420-pmu.c +++ b/drivers/soc/samsung/exynos5420-pmu.c @@ -17,7 +17,7 @@ #include "exynos-pmu.h" -static struct exynos_pmu_conf exynos5420_pmu_config[] = { +static const struct exynos_pmu_conf exynos5420_pmu_config[] = { /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */ { EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, { EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, diff --git a/arch/arm/mach-exynos/pm_domains.c b/drivers/soc/samsung/pm_domains.c similarity index 85% rename from arch/arm/mach-exynos/pm_domains.c rename to drivers/soc/samsung/pm_domains.c index 0e075d96ccd4..4822346aadc6 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/drivers/soc/samsung/pm_domains.c @@ -23,9 +23,13 @@ #include #include -#define INT_LOCAL_PWR_EN 0x7 #define MAX_CLK_PER_DOMAIN 4 +struct exynos_pm_domain_config { + /* Value for LOCAL_PWR_CFG and STATUS fields for each domain */ + u32 local_pwr_cfg; +}; + /* * Exynos specific wrapper around the generic power domain */ @@ -38,6 +42,7 @@ struct exynos_pm_domain { struct clk *clk[MAX_CLK_PER_DOMAIN]; struct clk *pclk[MAX_CLK_PER_DOMAIN]; struct clk *asb_clk[MAX_CLK_PER_DOMAIN]; + u32 local_pwr_cfg; }; static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) @@ -69,13 +74,13 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) } } - pwr = power_on ? INT_LOCAL_PWR_EN : 0; + pwr = power_on ? pd->local_pwr_cfg : 0; writel_relaxed(pwr, base); /* Wait max 1ms */ timeout = 10; - while ((readl_relaxed(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) { + while ((readl_relaxed(base + 0x4) & pd->local_pwr_cfg) != pwr) { if (!timeout) { op = (power_on) ? "enable" : "disable"; pr_err("Power domain %s %s failed\n", domain->name, op); @@ -119,14 +124,30 @@ static int exynos_pd_power_off(struct generic_pm_domain *domain) return exynos_pd_power(domain, false); } +static const struct exynos_pm_domain_config exynos4210_cfg __initconst = { + .local_pwr_cfg = 0x7, +}; + +static const struct of_device_id exynos_pm_domain_of_match[] __initconst = { + { + .compatible = "samsung,exynos4210-pd", + .data = &exynos4210_cfg, + }, + { }, +}; + static __init int exynos4_pm_init_power_domain(void) { struct device_node *np; + const struct of_device_id *match; - for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { + for_each_matching_node_and_match(np, exynos_pm_domain_of_match, &match) { + const struct exynos_pm_domain_config *pm_domain_cfg; struct exynos_pm_domain *pd; int on, i; + pm_domain_cfg = match->data; + pd = kzalloc(sizeof(*pd), GFP_KERNEL); if (!pd) { pr_err("%s: failed to allocate memory for domain\n", @@ -153,6 +174,7 @@ static __init int exynos4_pm_init_power_domain(void) pd->pd.power_off = exynos_pd_power_off; pd->pd.power_on = exynos_pd_power_on; + pd->local_pwr_cfg = pm_domain_cfg->local_pwr_cfg; for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { char clk_name[8]; @@ -185,14 +207,14 @@ static __init int exynos4_pm_init_power_domain(void) clk_put(pd->oscclk); no_clk: - on = readl_relaxed(pd->base + 0x4) & INT_LOCAL_PWR_EN; + on = readl_relaxed(pd->base + 0x4) & pd->local_pwr_cfg; pm_genpd_init(&pd->pd, NULL, !on); of_genpd_add_provider_simple(np, &pd->pd); } /* Assign the child power domains to their parents */ - for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { + for_each_matching_node(np, exynos_pm_domain_of_match) { struct generic_pm_domain *child_domain, *parent_domain; struct of_phandle_args args; diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c index bb173456bbff..71c834f3847e 100644 --- a/drivers/soc/tegra/pmc.c +++ b/drivers/soc/tegra/pmc.c @@ -51,6 +51,7 @@ #define PMC_CNTRL_CPU_PWRREQ_POLARITY (1 << 15) /* CPU pwr req polarity */ #define PMC_CNTRL_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ #define PMC_CNTRL_INTR_POLARITY (1 << 17) /* inverts INTR polarity */ +#define PMC_CNTRL_MAIN_RST (1 << 4) #define DPD_SAMPLE 0x020 #define DPD_SAMPLE_ENABLE (1 << 0) @@ -80,6 +81,14 @@ #define PMC_SENSOR_CTRL_SCRATCH_WRITE (1 << 2) #define PMC_SENSOR_CTRL_ENABLE_RST (1 << 1) +#define PMC_RST_STATUS 0x1b4 +#define PMC_RST_STATUS_POR 0 +#define PMC_RST_STATUS_WATCHDOG 1 +#define PMC_RST_STATUS_SENSOR 2 +#define PMC_RST_STATUS_SW_MAIN 3 +#define PMC_RST_STATUS_LP0 4 +#define PMC_RST_STATUS_AOTAG 5 + #define IO_DPD_REQ 0x1b8 #define IO_DPD_REQ_CODE_IDLE (0 << 30) #define IO_DPD_REQ_CODE_OFF (1 << 30) @@ -399,6 +408,7 @@ static int tegra_powergate_power_up(struct tegra_powergate *pg, disable_clks: tegra_powergate_disable_clocks(pg); usleep_range(10, 20); + powergate_off: tegra_powergate_set(pg->id, false); @@ -436,6 +446,7 @@ assert_resets: usleep_range(10, 20); tegra_powergate_reset_deassert(pg); usleep_range(10, 20); + disable_clks: tegra_powergate_disable_clocks(pg); @@ -540,6 +551,9 @@ int tegra_powergate_sequence_power_up(unsigned int id, struct clk *clk, struct tegra_powergate pg; int err; + if (!tegra_powergate_is_available(id)) + return -EINVAL; + pg.id = id; pg.clks = &clk; pg.num_clks = 1; @@ -638,9 +652,10 @@ static int tegra_pmc_restart_notify(struct notifier_block *this, tegra_pmc_writel(value, PMC_SCRATCH0); - value = tegra_pmc_readl(0); - value |= 0x10; - tegra_pmc_writel(value, 0); + /* reset everything but PMC_SCRATCH0 and PMC_RST_STATUS */ + value = tegra_pmc_readl(PMC_CNTRL); + value |= PMC_CNTRL_MAIN_RST; + tegra_pmc_writel(value, PMC_CNTRL); return NOTIFY_DONE; } @@ -722,13 +737,14 @@ static int tegra_powergate_of_get_clks(struct tegra_powergate *pg, err: while (i--) clk_put(pg->clks[i]); + kfree(pg->clks); return err; } static int tegra_powergate_of_get_resets(struct tegra_powergate *pg, - struct device_node *np) + struct device_node *np, bool off) { struct reset_control *rst; unsigned int i, count; @@ -748,6 +764,16 @@ static int tegra_powergate_of_get_resets(struct tegra_powergate *pg, err = PTR_ERR(pg->resets[i]); goto error; } + + if (off) + err = reset_control_assert(pg->resets[i]); + else + err = reset_control_deassert(pg->resets[i]); + + if (err) { + reset_control_put(pg->resets[i]); + goto error; + } } pg->num_resets = count; @@ -757,6 +783,7 @@ static int tegra_powergate_of_get_resets(struct tegra_powergate *pg, error: while (i--) reset_control_put(pg->resets[i]); + kfree(pg->resets); return err; @@ -765,16 +792,19 @@ error: static void tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np) { struct tegra_powergate *pg; + int id, err; bool off; - int id; pg = kzalloc(sizeof(*pg), GFP_KERNEL); if (!pg) - goto error; + return; id = tegra_powergate_lookup(pmc, np->name); - if (id < 0) + if (id < 0) { + dev_err(pmc->dev, "powergate lookup failed for %s: %d\n", + np->name, id); goto free_mem; + } /* * Clear the bit for this powergate so it cannot be managed @@ -788,31 +818,64 @@ static void tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np) pg->genpd.power_on = tegra_genpd_power_on; pg->pmc = pmc; - if (tegra_powergate_of_get_clks(pg, np)) - goto set_available; - - if (tegra_powergate_of_get_resets(pg, np)) - goto remove_clks; - off = !tegra_powergate_is_powered(pg->id); + err = tegra_powergate_of_get_clks(pg, np); + if (err < 0) { + dev_err(pmc->dev, "failed to get clocks for %s: %d\n", + np->name, err); + goto set_available; + } + + err = tegra_powergate_of_get_resets(pg, np, off); + if (err < 0) { + dev_err(pmc->dev, "failed to get resets for %s: %d\n", + np->name, err); + goto remove_clks; + } + + if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS)) + goto power_on_cleanup; + + /* + * FIXME: If XHCI is enabled for Tegra, then power-up the XUSB + * host and super-speed partitions. Once the XHCI driver + * manages the partitions itself this code can be removed. Note + * that we don't register these partitions with the genpd core + * to avoid it from powering down the partitions as they appear + * to be unused. + */ + if (IS_ENABLED(CONFIG_USB_XHCI_TEGRA) && + (id == TEGRA_POWERGATE_XUSBA || id == TEGRA_POWERGATE_XUSBC)) + goto power_on_cleanup; + pm_genpd_init(&pg->genpd, NULL, off); - if (of_genpd_add_provider_simple(np, &pg->genpd)) + err = of_genpd_add_provider_simple(np, &pg->genpd); + if (err < 0) { + dev_err(pmc->dev, "failed to add genpd provider for %s: %d\n", + np->name, err); goto remove_resets; + } dev_dbg(pmc->dev, "added power domain %s\n", pg->genpd.name); return; +power_on_cleanup: + if (off) + WARN_ON(tegra_powergate_power_up(pg, true)); + remove_resets: while (pg->num_resets--) reset_control_put(pg->resets[pg->num_resets]); + kfree(pg->resets); remove_clks: while (pg->num_clks--) clk_put(pg->clks[pg->num_clks]); + kfree(pg->clks); set_available: @@ -820,16 +883,20 @@ set_available: free_mem: kfree(pg); - -error: - dev_err(pmc->dev, "failed to create power domain for %s\n", np->name); } -static void tegra_powergate_init(struct tegra_pmc *pmc) +static void tegra_powergate_init(struct tegra_pmc *pmc, + struct device_node *parent) { struct device_node *np, *child; + unsigned int i; - np = of_get_child_by_name(pmc->dev->of_node, "powergates"); + /* Create a bitmap of the available and valid partitions */ + for (i = 0; i < pmc->soc->num_powergates; i++) + if (pmc->soc->powergates[i]) + set_bit(i, pmc->powergates_available); + + np = of_get_child_by_name(parent, "powergates"); if (!np) return; @@ -1205,6 +1272,14 @@ static int tegra_pmc_probe(struct platform_device *pdev) struct resource *res; int err; + /* + * Early initialisation should have configured an initial + * register mapping and setup the soc data pointer. If these + * are not valid then something went badly wrong! + */ + if (WARN_ON(!pmc->base || !pmc->soc)) + return -ENODEV; + err = tegra_pmc_parse_dt(pmc, pdev->dev.of_node); if (err < 0) return err; @@ -1242,8 +1317,6 @@ static int tegra_pmc_probe(struct platform_device *pdev) return err; } - tegra_powergate_init(pmc); - mutex_lock(&pmc->powergates_lock); iounmap(pmc->base); pmc->base = base; @@ -1477,10 +1550,11 @@ static int __init tegra_pmc_early_init(void) const struct of_device_id *match; struct device_node *np; struct resource regs; - unsigned int i; bool invert; u32 value; + mutex_init(&pmc->powergates_lock); + np = of_find_matching_node_and_match(NULL, tegra_pmc_match, &match); if (!np) { /* @@ -1515,39 +1589,40 @@ static int __init tegra_pmc_early_init(void) */ if (of_address_to_resource(np, 0, ®s) < 0) { pr_err("failed to get PMC registers\n"); + of_node_put(np); return -ENXIO; } - - pmc->soc = match->data; } pmc->base = ioremap_nocache(regs.start, resource_size(®s)); if (!pmc->base) { pr_err("failed to map PMC registers\n"); + of_node_put(np); return -ENXIO; } - /* Create a bit-map of the available and valid partitions */ - for (i = 0; i < pmc->soc->num_powergates; i++) - if (pmc->soc->powergates[i]) - set_bit(i, pmc->powergates_available); + if (np) { + pmc->soc = match->data; - mutex_init(&pmc->powergates_lock); + tegra_powergate_init(pmc, np); - /* - * Invert the interrupt polarity if a PMC device tree node exists and - * contains the nvidia,invert-interrupt property. - */ - invert = of_property_read_bool(np, "nvidia,invert-interrupt"); + /* + * Invert the interrupt polarity if a PMC device tree node + * exists and contains the nvidia,invert-interrupt property. + */ + invert = of_property_read_bool(np, "nvidia,invert-interrupt"); - value = tegra_pmc_readl(PMC_CNTRL); + value = tegra_pmc_readl(PMC_CNTRL); - if (invert) - value |= PMC_CNTRL_INTR_POLARITY; - else - value &= ~PMC_CNTRL_INTR_POLARITY; + if (invert) + value |= PMC_CNTRL_INTR_POLARITY; + else + value &= ~PMC_CNTRL_INTR_POLARITY; - tegra_pmc_writel(value, PMC_CNTRL); + tegra_pmc_writel(value, PMC_CNTRL); + + of_node_put(np); + } return 0; } diff --git a/drivers/soc/ux500/Kconfig b/drivers/soc/ux500/Kconfig new file mode 100644 index 000000000000..025a44aef5db --- /dev/null +++ b/drivers/soc/ux500/Kconfig @@ -0,0 +1,7 @@ +config UX500_SOC_ID + bool "SoC bus for ST-Ericsson ux500" + depends on ARCH_U8500 || COMPILE_TEST + default ARCH_U8500 + help + Include support for the SoC bus on the ARM RealView platforms + providing some sysfs information about the ASIC variant. diff --git a/drivers/soc/ux500/Makefile b/drivers/soc/ux500/Makefile new file mode 100644 index 000000000000..0b87ad04b018 --- /dev/null +++ b/drivers/soc/ux500/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_UX500_SOC_ID) += ux500-soc-id.o diff --git a/drivers/soc/ux500/ux500-soc-id.c b/drivers/soc/ux500/ux500-soc-id.c new file mode 100644 index 000000000000..6c1be74e5fcc --- /dev/null +++ b/drivers/soc/ux500/ux500-soc-id.c @@ -0,0 +1,222 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/** + * struct dbx500_asic_id - fields of the ASIC ID + * @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard" + * @partnumber: hithereto 0x8500 for DB8500 + * @revision: version code in the series + */ +struct dbx500_asic_id { + u16 partnumber; + u8 revision; + u8 process; +}; + +static struct dbx500_asic_id dbx500_id; + +static unsigned int __init ux500_read_asicid(phys_addr_t addr) +{ + void __iomem *virt = ioremap(addr, 4); + unsigned int asicid; + + if (!virt) + return 0; + + asicid = readl(virt); + iounmap(virt); + + return asicid; +} + +static void ux500_print_soc_info(unsigned int asicid) +{ + unsigned int rev = dbx500_id.revision; + + pr_info("DB%4x ", dbx500_id.partnumber); + + if (rev == 0x01) + pr_cont("Early Drop"); + else if (rev >= 0xA0) + pr_cont("v%d.%d" , (rev >> 4) - 0xA + 1, rev & 0xf); + else + pr_cont("Unknown"); + + pr_cont(" [%#010x]\n", asicid); +} + +static unsigned int partnumber(unsigned int asicid) +{ + return (asicid >> 8) & 0xffff; +} + +/* + * SOC MIDR ASICID ADDRESS ASICID VALUE + * DB8500ed 0x410fc090 0x9001FFF4 0x00850001 + * DB8500v1 0x411fc091 0x9001FFF4 0x008500A0 + * DB8500v1.1 0x411fc091 0x9001FFF4 0x008500A1 + * DB8500v2 0x412fc091 0x9001DBF4 0x008500B0 + * DB8520v2.2 0x412fc091 0x9001DBF4 0x008500B2 + * DB5500v1 0x412fc091 0x9001FFF4 0x005500A0 + * DB9540 0x413fc090 0xFFFFDBF4 0x009540xx + */ + +static void __init ux500_setup_id(void) +{ + unsigned int cpuid = read_cpuid_id(); + unsigned int asicid = 0; + phys_addr_t addr = 0; + + switch (cpuid) { + case 0x410fc090: /* DB8500ed */ + case 0x411fc091: /* DB8500v1 */ + addr = 0x9001FFF4; + break; + + case 0x412fc091: /* DB8520 / DB8500v2 / DB5500v1 */ + asicid = ux500_read_asicid(0x9001DBF4); + if (partnumber(asicid) == 0x8500 || + partnumber(asicid) == 0x8520) + /* DB8500v2 */ + break; + + /* DB5500v1 */ + addr = 0x9001FFF4; + break; + + case 0x413fc090: /* DB9540 */ + addr = 0xFFFFDBF4; + break; + } + + if (addr) + asicid = ux500_read_asicid(addr); + + if (!asicid) { + pr_err("Unable to identify SoC\n"); + BUG(); + } + + dbx500_id.process = asicid >> 24; + dbx500_id.partnumber = partnumber(asicid); + dbx500_id.revision = asicid & 0xff; + + ux500_print_soc_info(asicid); +} + +static const char * __init ux500_get_machine(void) +{ + return kasprintf(GFP_KERNEL, "DB%4x", dbx500_id.partnumber); +} + +static const char * __init ux500_get_family(void) +{ + return kasprintf(GFP_KERNEL, "ux500"); +} + +static const char * __init ux500_get_revision(void) +{ + unsigned int rev = dbx500_id.revision; + + if (rev == 0x01) + return kasprintf(GFP_KERNEL, "%s", "ED"); + else if (rev >= 0xA0) + return kasprintf(GFP_KERNEL, "%d.%d", + (rev >> 4) - 0xA + 1, rev & 0xf); + + return kasprintf(GFP_KERNEL, "%s", "Unknown"); +} + +static ssize_t ux500_get_process(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + if (dbx500_id.process == 0x00) + return sprintf(buf, "Standard\n"); + + return sprintf(buf, "%02xnm\n", dbx500_id.process); +} + +static const char *db8500_read_soc_id(struct device_node *backupram) +{ + void __iomem *base; + void __iomem *uid; + const char *retstr; + + base = of_iomap(backupram, 0); + if (!base) + return NULL; + uid = base + 0x1fc0; + + /* Throw these device-specific numbers into the entropy pool */ + add_device_randomness(uid, 0x14); + retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", + readl((u32 *)uid+0), + readl((u32 *)uid+1), readl((u32 *)uid+2), + readl((u32 *)uid+3), readl((u32 *)uid+4)); + iounmap(base); + return retstr; +} + +static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr, + struct device_node *backupram) +{ + soc_dev_attr->soc_id = db8500_read_soc_id(backupram); + soc_dev_attr->machine = ux500_get_machine(); + soc_dev_attr->family = ux500_get_family(); + soc_dev_attr->revision = ux500_get_revision(); +} + +static const struct device_attribute ux500_soc_attr = + __ATTR(process, S_IRUGO, ux500_get_process, NULL); + +static int __init ux500_soc_device_init(void) +{ + struct device *parent; + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + struct device_node *backupram; + + backupram = of_find_compatible_node(NULL, NULL, "ste,dbx500-backupram"); + if (!backupram) + return 0; + + ux500_setup_id(); + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return -ENOMEM; + + soc_info_populate(soc_dev_attr, backupram); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr); + return PTR_ERR(soc_dev); + } + + parent = soc_device_to_device(soc_dev); + device_create_file(parent, &ux500_soc_attr); + + return 0; +} +subsys_initcall(ux500_soc_device_init); diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index 5beafd2d2218..ac1328629baa 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -539,7 +539,7 @@ static int uart_clps711x_remove(struct platform_device *pdev) } static const struct of_device_id __maybe_unused clps711x_uart_dt_ids[] = { - { .compatible = "cirrus,clps711x-uart", }, + { .compatible = "cirrus,ep7209-uart", }, { } }; MODULE_DEVICE_TABLE(of, clps711x_uart_dt_ids); diff --git a/drivers/video/fbdev/clps711x-fb.c b/drivers/video/fbdev/clps711x-fb.c index 649b32f78c08..ff561073ee4e 100644 --- a/drivers/video/fbdev/clps711x-fb.c +++ b/drivers/video/fbdev/clps711x-fb.c @@ -273,7 +273,7 @@ static int clps711x_fb_probe(struct platform_device *pdev) } cfb->syscon = - syscon_regmap_lookup_by_compatible("cirrus,clps711x-syscon1"); + syscon_regmap_lookup_by_compatible("cirrus,ep7209-syscon1"); if (IS_ERR(cfb->syscon)) { ret = PTR_ERR(cfb->syscon); goto out_fb_release; @@ -376,7 +376,7 @@ static int clps711x_fb_remove(struct platform_device *pdev) } static const struct of_device_id clps711x_fb_dt_ids[] = { - { .compatible = "cirrus,clps711x-fb", }, + { .compatible = "cirrus,ep7209-fb", }, { } }; MODULE_DEVICE_TABLE(of, clps711x_fb_dt_ids); diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h new file mode 100644 index 000000000000..524d6077ac1b --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h @@ -0,0 +1,210 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * BSD LICENSE + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H + +/* RESET0 */ +#define RESET_HIU 0 +/* 1 */ +#define RESET_DOS_RESET 2 +#define RESET_DDR_TOP 3 +#define RESET_DCU_RESET 4 +#define RESET_VIU 5 +#define RESET_AIU 6 +#define RESET_VID_PLL_DIV 7 +/* 8 */ +#define RESET_PMUX 9 +#define RESET_VENC 10 +#define RESET_ASSIST 11 +#define RESET_AFIFO2 12 +#define RESET_VCBUS 13 +/* 14 */ +/* 15 */ +#define RESET_GIC 16 +#define RESET_CAPB3_DECODE 17 +#define RESET_NAND_CAPB3 18 +#define RESET_HDMITX_CAPB3 19 +#define RESET_MALI_CAPB3 20 +#define RESET_DOS_CAPB3 21 +#define RESET_SYS_CPU_CAPB3 22 +#define RESET_CBUS_CAPB3 23 +#define RESET_AHB_CNTL 24 +#define RESET_AHB_DATA 25 +#define RESET_VCBUS_CLK81 26 +#define RESET_MMC 27 +#define RESET_MIPI_0 28 +#define RESET_MIPI_1 29 +#define RESET_MIPI_2 30 +#define RESET_MIPI_3 31 +/* RESET1 */ +#define RESET_CPPM 32 +#define RESET_DEMUX 33 +#define RESET_USB_OTG 34 +#define RESET_DDR 35 +#define RESET_AO_RESET 36 +#define RESET_BT656 37 +#define RESET_AHB_SRAM 38 +/* 39 */ +#define RESET_PARSER 40 +#define RESET_BLKMV 41 +#define RESET_ISA 42 +#define RESET_ETHERNET 43 +#define RESET_SD_EMMC_A 44 +#define RESET_SD_EMMC_B 45 +#define RESET_SD_EMMC_C 46 +#define RESET_ROM_BOOT 47 +#define RESET_SYS_CPU_0 48 +#define RESET_SYS_CPU_1 49 +#define RESET_SYS_CPU_2 50 +#define RESET_SYS_CPU_3 51 +#define RESET_SYS_CPU_CORE_0 52 +#define RESET_SYS_CPU_CORE_1 53 +#define RESET_SYS_CPU_CORE_2 54 +#define RESET_SYS_CPU_CORE_3 55 +#define RESET_SYS_PLL_DIV 56 +#define RESET_SYS_CPU_AXI 57 +#define RESET_SYS_CPU_L2 58 +#define RESET_SYS_CPU_P 59 +#define RESET_SYS_CPU_MBIST 60 +/* 61 */ +/* 62 */ +/* 63 */ +/* RESET2 */ +#define RESET_VD_RMEM 64 +#define RESET_AUDIN 65 +#define RESET_HDMI_TX 66 +/* 67 */ +/* 68 */ +/* 69 */ +#define RESET_GE2D 70 +#define RESET_PARSER_REG 71 +#define RESET_PARSER_FETCH 72 +#define RESET_PARSER_CTL 73 +#define RESET_PARSER_TOP 74 +/* 75 */ +/* 76 */ +#define RESET_AO_CPU_RESET 77 +#define RESET_MALI 78 +#define RESET_HDMI_SYSTEM_RESET 79 +/* 80-95 */ +/* RESET3 */ +#define RESET_RING_OSCILLATOR 96 +#define RESET_SYS_CPU 97 +#define RESET_EFUSE 98 +#define RESET_SYS_CPU_BVCI 99 +#define RESET_AIFIFO 100 +#define RESET_TVFE 101 +#define RESET_AHB_BRIDGE_CNTL 102 +/* 103 */ +#define RESET_AUDIO_DAC 104 +#define RESET_DEMUX_TOP 105 +#define RESET_DEMUX_DES 106 +#define RESET_DEMUX_S2P_0 107 +#define RESET_DEMUX_S2P_1 108 +#define RESET_DEMUX_RESET_0 109 +#define RESET_DEMUX_RESET_1 110 +#define RESET_DEMUX_RESET_2 111 +/* 112-127 */ +/* RESET4 */ +/* 128 */ +/* 129 */ +/* 130 */ +/* 131 */ +#define RESET_DVIN_RESET 132 +#define RESET_RDMA 133 +#define RESET_VENCI 134 +#define RESET_VENCP 135 +/* 136 */ +#define RESET_VDAC 137 +#define RESET_RTC 138 +/* 139 */ +#define RESET_VDI6 140 +#define RESET_VENCL 141 +#define RESET_I2C_MASTER_2 142 +#define RESET_I2C_MASTER_1 143 +/* 144-159 */ +/* RESET5 */ +/* 160-191 */ +/* RESET6 */ +#define RESET_PERIPHS_GENERAL 192 +#define RESET_PERIPHS_SPICC 193 +#define RESET_PERIPHS_SMART_CARD 194 +#define RESET_PERIPHS_SAR_ADC 195 +#define RESET_PERIPHS_I2C_MASTER_0 196 +#define RESET_SANA 197 +/* 198 */ +#define RESET_PERIPHS_STREAM_INTERFACE 199 +#define RESET_PERIPHS_SDIO 200 +#define RESET_PERIPHS_UART_0 201 +#define RESET_PERIPHS_UART_1_2 202 +#define RESET_PERIPHS_ASYNC_0 203 +#define RESET_PERIPHS_ASYNC_1 204 +#define RESET_PERIPHS_SPI_0 205 +#define RESET_PERIPHS_SDHC 206 +#define RESET_UART_SLIP 207 +/* 208-223 */ +/* RESET7 */ +#define RESET_USB_DDR_0 224 +#define RESET_USB_DDR_1 225 +#define RESET_USB_DDR_2 226 +#define RESET_USB_DDR_3 227 +/* 228 */ +#define RESET_DEVICE_MMC_ARB 229 +/* 230 */ +#define RESET_VID_LOCK 231 +#define RESET_A9_DMC_PIPEL 232 +/* 233-255 */ + +#endif diff --git a/include/dt-bindings/reset/amlogic,meson8b-reset.h b/include/dt-bindings/reset/amlogic,meson8b-reset.h new file mode 100644 index 000000000000..614aff2c7aff --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson8b-reset.h @@ -0,0 +1,175 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * BSD LICENSE + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H + +/* RESET0 */ +#define RESET_HIU 0 +#define RESET_VLD 1 +#define RESET_IQIDCT 2 +#define RESET_MC 3 +/* 8 */ +#define RESET_VIU 5 +#define RESET_AIU 6 +#define RESET_MCPU 7 +#define RESET_CCPU 8 +#define RESET_PMUX 9 +#define RESET_VENC 10 +#define RESET_ASSIST 11 +#define RESET_AFIFO2 12 +#define RESET_MDEC 13 +#define RESET_VLD_PART 14 +#define RESET_VIFIFO 15 +/* 16-31 */ +/* RESET1 */ +/* 32 */ +#define RESET_DEMUX 33 +#define RESET_USB_OTG 34 +#define RESET_DDR 35 +#define RESET_VDAC_1 36 +#define RESET_BT656 37 +#define RESET_AHB_SRAM 38 +#define RESET_AHB_BRIDGE 39 +#define RESET_PARSER 40 +#define RESET_BLKMV 41 +#define RESET_ISA 42 +#define RESET_ETHERNET 43 +#define RESET_ABUF 44 +#define RESET_AHB_DATA 45 +#define RESET_AHB_CNTL 46 +#define RESET_ROM_BOOT 47 +/* 48-63 */ +/* RESET2 */ +#define RESET_VD_RMEM 64 +#define RESET_AUDIN 65 +#define RESET_DBLK 66 +#define RESET_PIC_DC 66 +#define RESET_PSC 66 +#define RESET_NAND 66 +#define RESET_GE2D 70 +#define RESET_PARSER_REG 71 +#define RESET_PARSER_FETCH 72 +#define RESET_PARSER_CTL 73 +#define RESET_PARSER_TOP 74 +#define RESET_HDMI_APB 75 +#define RESET_AUDIO_APB 76 +#define RESET_MEDIA_CPU 77 +#define RESET_MALI 78 +#define RESET_HDMI_SYSTEM_RESET 79 +/* 80-95 */ +/* RESET3 */ +#define RESET_RING_OSCILLATOR 96 +#define RESET_SYS_CPU_0 97 +#define RESET_EFUSE 98 +#define RESET_SYS_CPU_BVCI 99 +#define RESET_AIFIFO 100 +#define RESET_AUDIO_PLL_MODULATOR 101 +#define RESET_AHB_BRIDGE_CNTL 102 +#define RESET_SYS_CPU_1 103 +#define RESET_AUDIO_DAC 104 +#define RESET_DEMUX_TOP 105 +#define RESET_DEMUX_DES 106 +#define RESET_DEMUX_S2P_0 107 +#define RESET_DEMUX_S2P_1 108 +#define RESET_DEMUX_RESET_0 109 +#define RESET_DEMUX_RESET_1 110 +#define RESET_DEMUX_RESET_2 111 +/* 112-127 */ +/* RESET4 */ +#define RESET_PL310 128 +#define RESET_A5_APB 129 +#define RESET_A5_AXI 130 +#define RESET_A5 131 +#define RESET_DVIN 132 +#define RESET_RDMA 133 +#define RESET_VENCI 134 +#define RESET_VENCP 135 +#define RESET_VENCT 136 +#define RESET_VDAC_4 137 +#define RESET_RTC 138 +#define RESET_A5_DEBUG 139 +#define RESET_VDI6 140 +#define RESET_VENCL 141 +/* 142-159 */ +/* RESET5 */ +#define RESET_DDR_PLL 160 +#define RESET_MISC_PLL 161 +#define RESET_SYS_PLL 162 +#define RESET_HPLL_PLL 163 +#define RESET_AUDIO_PLL 164 +#define RESET_VID2_PLL 165 +/* 166-191 */ +/* RESET6 */ +#define RESET_PERIPHS_GENERAL 192 +#define RESET_PERIPHS_IR_REMOTE 193 +#define RESET_PERIPHS_SMART_CARD 194 +#define RESET_PERIPHS_SAR_ADC 195 +#define RESET_PERIPHS_I2C_MASTER_0 196 +#define RESET_PERIPHS_I2C_MASTER_1 197 +#define RESET_PERIPHS_I2C_SLAVE 198 +#define RESET_PERIPHS_STREAM_INTERFACE 199 +#define RESET_PERIPHS_SDIO 200 +#define RESET_PERIPHS_UART_0 201 +#define RESET_PERIPHS_UART_1 202 +#define RESET_PERIPHS_ASYNC_0 203 +#define RESET_PERIPHS_ASYNC_1 204 +#define RESET_PERIPHS_SPI_0 205 +#define RESET_PERIPHS_SPI_1 206 +#define RESET_PERIPHS_LED_PWM 207 +/* 208-223 */ +/* RESET7 */ +/* 224-255 */ + +#endif diff --git a/include/dt-bindings/reset/hisi,hi6220-resets.h b/include/dt-bindings/reset/hisi,hi6220-resets.h index ca08a7e5248e..322ec5335b65 100644 --- a/include/dt-bindings/reset/hisi,hi6220-resets.h +++ b/include/dt-bindings/reset/hisi,hi6220-resets.h @@ -64,4 +64,12 @@ #define PERIPH_RSDIST9_CARM_SOCDBG 0x507 #define PERIPH_RSDIST9_CARM_ETM 0x508 +#define MEDIA_G3D 0 +#define MEDIA_CODEC_VPU 2 +#define MEDIA_CODEC_JPEG 3 +#define MEDIA_ISP 4 +#define MEDIA_ADE 5 +#define MEDIA_MMU 6 +#define MEDIA_XG2RAM1 7 + #endif /*_DT_BINDINGS_RESET_CONTROLLER_HI6220*/ diff --git a/include/dt-bindings/reset/ti-syscon.h b/include/dt-bindings/reset/ti-syscon.h new file mode 100644 index 000000000000..884fd91df8e9 --- /dev/null +++ b/include/dt-bindings/reset/ti-syscon.h @@ -0,0 +1,38 @@ +/* + * TI Syscon Reset definitions + * + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DT_BINDINGS_RESET_TI_SYSCON_H__ +#define __DT_BINDINGS_RESET_TI_SYSCON_H__ + +/* + * The reset does not support the feature and corresponding + * values are not valid + */ +#define ASSERT_NONE (1 << 0) +#define DEASSERT_NONE (1 << 1) +#define STATUS_NONE (1 << 2) + +/* When set this function is activated by setting(vs clearing) this bit */ +#define ASSERT_SET (1 << 3) +#define DEASSERT_SET (1 << 4) +#define STATUS_SET (1 << 5) + +/* The following are the inverse of the above and are added for consistency */ +#define ASSERT_CLEAR (0 << 3) +#define DEASSERT_CLEAR (0 << 4) +#define STATUS_CLEAR (0 << 5) + +#endif diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h index 689312745b2f..01024d1aed0e 100644 --- a/include/linux/mfd/abx500/ab8500-sysctrl.h +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h @@ -37,12 +37,6 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) return ab8500_sysctrl_write(reg, bits, 0); } -/* Configuration data for SysClkReq1RfClkBuf - SysClkReq8RfClkBuf */ -struct ab8500_sysctrl_platform_data { - u8 initial_req_buf_config[8]; - u16 (*reboot_reason_code)(const char *cmd); -}; - /* Registers */ #define AB8500_TURNONSTATUS 0x100 #define AB8500_RESETSTATUS 0x101 diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index bf5109d38a26..5d374601404c 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -178,16 +178,6 @@ enum ddr_pwrst { #define DB8500_PRCMU_LEGACY_OFFSET 0xDD4 -struct prcmu_pdata -{ - bool enable_set_ddr_opp; - bool enable_ape_opp_100_voltage; - struct ab8500_platform_data *ab_platdata; - u32 version_offset; - u32 legacy_offset; - u32 adt_offset; -}; - #define PRCMU_FW_PROJECT_U8500 2 #define PRCMU_FW_PROJECT_U8400 3 #define PRCMU_FW_PROJECT_U9500 4 /* Customer specific */ diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h deleted file mode 100644 index 3af0da1f3be5..000000000000 --- a/include/linux/platform_data/clk-ux500.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Clock definitions for ux500 platforms - * - * Copyright (C) 2012 ST-Ericsson SA - * Author: Ulf Hansson - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __CLK_UX500_H -#define __CLK_UX500_H - -void u8500_clk_init(void); -void u9540_clk_init(void); -void u8540_clk_init(void); - -#endif /* __CLK_UX500_H */ diff --git a/include/linux/platform_data/media/ir-rx51.h b/include/linux/platform_data/media/ir-rx51.h index 3038120ca46e..812d87307877 100644 --- a/include/linux/platform_data/media/ir-rx51.h +++ b/include/linux/platform_data/media/ir-rx51.h @@ -2,10 +2,7 @@ #define _LIRC_RX51_H struct lirc_rx51_platform_data { - int pwm_timer; - int(*set_max_mpu_wakeup_lat)(struct device *dev, long t); - struct pwm_omap_dmtimer_pdata *dmtimer; }; #endif diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h index 9e12000914b3..cc32ab852fbc 100644 --- a/include/linux/qcom_scm.h +++ b/include/linux/qcom_scm.h @@ -29,6 +29,14 @@ extern bool qcom_scm_hdcp_available(void); extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp); +extern bool qcom_scm_pas_supported(u32 peripheral); +extern int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, + size_t size); +extern int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, + phys_addr_t size); +extern int qcom_scm_pas_auth_and_reset(u32 peripheral); +extern int qcom_scm_pas_shutdown(u32 peripheral); + #define QCOM_SCM_CPU_PWR_DOWN_L2_ON 0x0 #define QCOM_SCM_CPU_PWR_DOWN_L2_OFF 0x1 diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h index b91ba932bbd4..db1fe6772ad5 100644 --- a/include/linux/reset-controller.h +++ b/include/linux/reset-controller.h @@ -53,4 +53,8 @@ struct reset_controller_dev { int reset_controller_register(struct reset_controller_dev *rcdev); void reset_controller_unregister(struct reset_controller_dev *rcdev); +struct device; +int devm_reset_controller_register(struct device *dev, + struct reset_controller_dev *rcdev); + #endif diff --git a/include/linux/reset.h b/include/linux/reset.h index 45a4abeb6acb..5daff15722d3 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -71,14 +71,14 @@ static inline struct reset_control *__of_reset_control_get( struct device_node *node, const char *id, int index, int shared) { - return ERR_PTR(-EINVAL); + return ERR_PTR(-ENOTSUPP); } static inline struct reset_control *__devm_reset_control_get( struct device *dev, const char *id, int index, int shared) { - return ERR_PTR(-EINVAL); + return ERR_PTR(-ENOTSUPP); } #endif /* CONFIG_RESET_CONTROLLER */ diff --git a/include/linux/scpi_protocol.h b/include/linux/scpi_protocol.h index 35de50a65665..dc5f989be226 100644 --- a/include/linux/scpi_protocol.h +++ b/include/linux/scpi_protocol.h @@ -70,6 +70,8 @@ struct scpi_ops { int (*sensor_get_capability)(u16 *sensors); int (*sensor_get_info)(u16 sensor_id, struct scpi_sensor_info *); int (*sensor_get_value)(u16, u64 *); + int (*device_get_power_state)(u16); + int (*device_set_power_state)(u16, u8); }; #if IS_REACHABLE(CONFIG_ARM_SCPI_PROTOCOL) diff --git a/include/linux/soc/qcom/wcnss_ctrl.h b/include/linux/soc/qcom/wcnss_ctrl.h new file mode 100644 index 000000000000..a37bc5538f19 --- /dev/null +++ b/include/linux/soc/qcom/wcnss_ctrl.h @@ -0,0 +1,8 @@ +#ifndef __WCNSS_CTRL_H__ +#define __WCNSS_CTRL_H__ + +#include + +struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb); + +#endif diff --git a/include/soc/tegra/cpuidle.h b/include/soc/tegra/cpuidle.h index ea04f4225638..1fae9c7800d1 100644 --- a/include/soc/tegra/cpuidle.h +++ b/include/soc/tegra/cpuidle.h @@ -14,7 +14,7 @@ #ifndef __SOC_TEGRA_CPUIDLE_H__ #define __SOC_TEGRA_CPUIDLE_H__ -#ifdef CONFIG_CPU_IDLE +#if defined(CONFIG_ARM) && defined(CONFIG_CPU_IDLE) void tegra_cpuidle_pcie_irqs_in_use(void); #else static inline void tegra_cpuidle_pcie_irqs_in_use(void) diff --git a/sound/soc/codecs/ab8500-codec.c b/sound/soc/codecs/ab8500-codec.c index 8b1d0c1a7839..2fc89155f14a 100644 --- a/sound/soc/codecs/ab8500-codec.c +++ b/sound/soc/codecs/ab8500-codec.c @@ -2464,45 +2464,20 @@ static int ab8500_codec_probe(struct snd_soc_codec *codec) struct device *dev = codec->dev; struct device_node *np = dev->of_node; struct ab8500_codec_drvdata *drvdata = dev_get_drvdata(dev); - struct ab8500_platform_data *pdata; + struct ab8500_codec_platform_data codec_pdata; struct filter_control *fc; int status; dev_dbg(dev, "%s: Enter.\n", __func__); - /* Setup AB8500 according to board-settings */ - pdata = dev_get_platdata(dev->parent); + ab8500_codec_of_probe(dev, np, &codec_pdata); - if (np) { - if (!pdata) - pdata = devm_kzalloc(dev, - sizeof(struct ab8500_platform_data), - GFP_KERNEL); - - if (pdata && !pdata->codec) - pdata->codec - = devm_kzalloc(dev, - sizeof(struct ab8500_codec_platform_data), - GFP_KERNEL); - - if (!(pdata && pdata->codec)) - return -ENOMEM; - - ab8500_codec_of_probe(dev, np, pdata->codec); - - } else { - if (!(pdata && pdata->codec)) { - dev_err(dev, "No codec platform data or DT found\n"); - return -EINVAL; - } - } - - status = ab8500_audio_setup_mics(codec, &pdata->codec->amics); + status = ab8500_audio_setup_mics(codec, &codec_pdata.amics); if (status < 0) { pr_err("%s: Failed to setup mics (%d)!\n", __func__, status); return status; } - status = ab8500_audio_set_ear_cmv(codec, pdata->codec->ear_cmv); + status = ab8500_audio_set_ear_cmv(codec, codec_pdata.ear_cmv); if (status < 0) { pr_err("%s: Failed to set earpiece CM-voltage (%d)!\n", __func__, status);