diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 9280d96bb291..cc6a0b34ad75 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -4,6 +4,7 @@
  * Copyright (c) 2015-2016 Ido Schimmel <idosch@mellanox.com>
  * Copyright (c) 2015 Elad Raz <eladr@mellanox.com>
  * Copyright (c) 2015-2016 Jiri Pirko <jiri@mellanox.com>
+ * Copyright (c) 2016 Yotam Gigi <yotamg@mellanox.com>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -3884,6 +3885,144 @@ mlxsw_reg_ralue_act_ip2me_pack(char *payload)
 					MLXSW_REG_RALUE_ACTION_TYPE_IP2ME);
 }
 
+/* RAUHT - Router Algorithmic LPM Unicast Host Table Register
+ * ----------------------------------------------------------
+ * The RAUHT register is used to configure and query the Unicast Host table in
+ * devices that implement the Algorithmic LPM.
+ */
+#define MLXSW_REG_RAUHT_ID 0x8014
+#define MLXSW_REG_RAUHT_LEN 0x74
+
+static const struct mlxsw_reg_info mlxsw_reg_rauht = {
+	.id = MLXSW_REG_RAUHT_ID,
+	.len = MLXSW_REG_RAUHT_LEN,
+};
+
+enum mlxsw_reg_rauht_type {
+	MLXSW_REG_RAUHT_TYPE_IPV4,
+	MLXSW_REG_RAUHT_TYPE_IPV6,
+};
+
+/* reg_rauht_type
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, rauht, type, 0x00, 24, 2);
+
+enum mlxsw_reg_rauht_op {
+	MLXSW_REG_RAUHT_OP_QUERY_READ = 0,
+	/* Read operation */
+	MLXSW_REG_RAUHT_OP_QUERY_CLEAR_ON_READ = 1,
+	/* Clear on read operation. Used to read entry and clear
+	 * activity bit.
+	 */
+	MLXSW_REG_RAUHT_OP_WRITE_ADD = 0,
+	/* Add. Used to write a new entry to the table. All R/W fields are
+	 * relevant for new entry. Activity bit is set for new entries.
+	 */
+	MLXSW_REG_RAUHT_OP_WRITE_UPDATE = 1,
+	/* Update action. Used to update an existing route entry and
+	 * only update the following fields:
+	 * trap_action, trap_id, mac, counter_set_type, counter_index
+	 */
+	MLXSW_REG_RAUHT_OP_WRITE_CLEAR_ACTIVITY = 2,
+	/* Clear activity. A bit is cleared for the entry. */
+	MLXSW_REG_RAUHT_OP_WRITE_DELETE = 3,
+	/* Delete entry */
+	MLXSW_REG_RAUHT_OP_WRITE_DELETE_ALL = 4,
+	/* Delete all host entries on a RIF. In this command, dip
+	 * field is reserved.
+	 */
+};
+
+/* reg_rauht_op
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, rauht, op, 0x00, 20, 3);
+
+/* reg_rauht_a
+ * Activity. Set for new entries. Set if a packet lookup has hit on
+ * the specific entry.
+ * To clear the a bit, use "clear activity" op.
+ * Enabled by activity_dis in RGCR
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, rauht, a, 0x00, 16, 1);
+
+/* reg_rauht_rif
+ * Router Interface
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, rauht, rif, 0x00, 0, 16);
+
+/* reg_rauht_dip*
+ * Destination address.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, rauht, dip4, 0x1C, 0x0, 32);
+
+enum mlxsw_reg_rauht_trap_action {
+	MLXSW_REG_RAUHT_TRAP_ACTION_NOP,
+	MLXSW_REG_RAUHT_TRAP_ACTION_TRAP,
+	MLXSW_REG_RAUHT_TRAP_ACTION_MIRROR_TO_CPU,
+	MLXSW_REG_RAUHT_TRAP_ACTION_MIRROR,
+	MLXSW_REG_RAUHT_TRAP_ACTION_DISCARD_ERRORS,
+};
+
+/* reg_rauht_trap_action
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, rauht, trap_action, 0x60, 28, 4);
+
+enum mlxsw_reg_rauht_trap_id {
+	MLXSW_REG_RAUHT_TRAP_ID_RTR_EGRESS0,
+	MLXSW_REG_RAUHT_TRAP_ID_RTR_EGRESS1,
+};
+
+/* reg_rauht_trap_id
+ * Trap ID to be reported to CPU.
+ * Trap-ID is RTR_EGRESS0 or RTR_EGRESS1.
+ * For trap_action of NOP, MIRROR and DISCARD_ERROR,
+ * trap_id is reserved.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, rauht, trap_id, 0x60, 0, 9);
+
+/* reg_rauht_counter_set_type
+ * Counter set type for flow counters
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, rauht, counter_set_type, 0x68, 24, 8);
+
+/* reg_rauht_counter_index
+ * Counter index for flow counters
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, rauht, counter_index, 0x68, 0, 24);
+
+/* reg_rauht_mac
+ * MAC address.
+ * Access: RW
+ */
+MLXSW_ITEM_BUF(reg, rauht, mac, 0x6E, 6);
+
+static inline void mlxsw_reg_rauht_pack(char *payload,
+					enum mlxsw_reg_rauht_op op, u16 rif,
+					const char *mac)
+{
+	MLXSW_REG_ZERO(rauht, payload);
+	mlxsw_reg_rauht_op_set(payload, op);
+	mlxsw_reg_rauht_rif_set(payload, rif);
+	mlxsw_reg_rauht_mac_memcpy_to(payload, mac);
+}
+
+static inline void mlxsw_reg_rauht_pack4(char *payload,
+					 enum mlxsw_reg_rauht_op op, u16 rif,
+					 const char *mac, u32 dip)
+{
+	mlxsw_reg_rauht_pack(payload, op, rif, mac);
+	mlxsw_reg_rauht_dip4_set(payload, dip);
+}
+
 /* MFCR - Management Fan Control Register
  * --------------------------------------
  * This register controls the settings of the Fan Speed PWM mechanism.
@@ -4634,6 +4773,8 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id)
 		return "RALTB";
 	case MLXSW_REG_RALUE_ID:
 		return "RALUE";
+	case MLXSW_REG_RAUHT_ID:
+		return "RAUHT";
 	case MLXSW_REG_MFCR_ID:
 		return "MFCR";
 	case MLXSW_REG_MFSC_ID: