hwmon: PMBus driver documentation
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
This commit is contained in:
Guenter Roeck
parent
442aba7872
commit
44f5a408ba
215
Documentation/hwmon/pmbus
Normal file
215
Documentation/hwmon/pmbus
Normal file
@ -0,0 +1,215 @@
|
|||||||
|
Kernel driver pmbus
|
||||||
|
====================
|
||||||
|
|
||||||
|
Supported chips:
|
||||||
|
* Ericsson BMR45X series
|
||||||
|
DC/DC Converter
|
||||||
|
Prefixes: 'bmr450', 'bmr451', 'bmr453', 'bmr454'
|
||||||
|
Addresses scanned: -
|
||||||
|
Datasheet:
|
||||||
|
http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146395
|
||||||
|
* Linear Technology LTC2978
|
||||||
|
Octal PMBus Power Supply Monitor and Controller
|
||||||
|
Prefix: 'ltc2978'
|
||||||
|
Addresses scanned: -
|
||||||
|
Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
|
||||||
|
* Maxim MAX16064
|
||||||
|
Quad Power-Supply Controller
|
||||||
|
Prefix: 'max16064'
|
||||||
|
Addresses scanned: -
|
||||||
|
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
|
||||||
|
* Maxim MAX34440
|
||||||
|
PMBus 6-Channel Power-Supply Manager
|
||||||
|
Prefixes: 'max34440'
|
||||||
|
Addresses scanned: -
|
||||||
|
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf
|
||||||
|
* Maxim MAX34441
|
||||||
|
PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller
|
||||||
|
Prefixes: 'max34441'
|
||||||
|
Addresses scanned: -
|
||||||
|
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf
|
||||||
|
* Maxim MAX8688
|
||||||
|
Digital Power-Supply Controller/Monitor
|
||||||
|
Prefix: 'max8688'
|
||||||
|
Addresses scanned: -
|
||||||
|
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
|
||||||
|
* Generic PMBus devices
|
||||||
|
Prefix: 'pmbus'
|
||||||
|
Addresses scanned: -
|
||||||
|
Datasheet: n.a.
|
||||||
|
|
||||||
|
Author: Guenter Roeck <guenter.roeck@ericsson.com>
|
||||||
|
|
||||||
|
|
||||||
|
Description
|
||||||
|
-----------
|
||||||
|
|
||||||
|
This driver supports hardware montoring for various PMBus compliant devices.
|
||||||
|
It supports voltage, current, power, and temperature sensors as supported
|
||||||
|
by the device.
|
||||||
|
|
||||||
|
Each monitored channel has its own high and low limits, plus a critical
|
||||||
|
limit.
|
||||||
|
|
||||||
|
Fan support will be added in a later version of this driver.
|
||||||
|
|
||||||
|
|
||||||
|
Usage Notes
|
||||||
|
-----------
|
||||||
|
|
||||||
|
This driver does not probe for PMBus devices, since there is no register
|
||||||
|
which can be safely used to identify the chip (The MFG_ID register is not
|
||||||
|
supported by all chips), and since there is no well defined address range for
|
||||||
|
PMBus devices. You will have to instantiate the devices explicitly.
|
||||||
|
|
||||||
|
Example: the following will load the driver for an LTC2978 at address 0x60
|
||||||
|
on I2C bus #1:
|
||||||
|
$ modprobe pmbus
|
||||||
|
$ echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
|
||||||
|
|
||||||
|
|
||||||
|
Platform data support
|
||||||
|
---------------------
|
||||||
|
|
||||||
|
Support for additional PMBus chips can be added by defining chip parameters in
|
||||||
|
a new chip specific driver file. For example, (untested) code to add support for
|
||||||
|
Emerson DS1200 power modules might look as follows.
|
||||||
|
|
||||||
|
static struct pmbus_driver_info ds1200_info = {
|
||||||
|
.pages = 1,
|
||||||
|
/* Note: All other sensors are in linear mode */
|
||||||
|
.direct[PSC_VOLTAGE_OUT] = true,
|
||||||
|
.direct[PSC_TEMPERATURE] = true,
|
||||||
|
.direct[PSC_CURRENT_OUT] = true,
|
||||||
|
.m[PSC_VOLTAGE_IN] = 1,
|
||||||
|
.b[PSC_VOLTAGE_IN] = 0,
|
||||||
|
.R[PSC_VOLTAGE_IN] = 3,
|
||||||
|
.m[PSC_VOLTAGE_OUT] = 1,
|
||||||
|
.b[PSC_VOLTAGE_OUT] = 0,
|
||||||
|
.R[PSC_VOLTAGE_OUT] = 3,
|
||||||
|
.m[PSC_TEMPERATURE] = 1,
|
||||||
|
.b[PSC_TEMPERATURE] = 0,
|
||||||
|
.R[PSC_TEMPERATURE] = 3,
|
||||||
|
.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT
|
||||||
|
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
|
||||||
|
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
|
||||||
|
| PMBUS_HAVE_PIN | PMBUS_HAVE_POUT
|
||||||
|
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
|
||||||
|
| PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12,
|
||||||
|
};
|
||||||
|
|
||||||
|
static int ds1200_probe(struct i2c_client *client,
|
||||||
|
const struct i2c_device_id *id)
|
||||||
|
{
|
||||||
|
return pmbus_do_probe(client, id, &ds1200_info);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ds1200_remove(struct i2c_client *client)
|
||||||
|
{
|
||||||
|
return pmbus_do_remove(client);
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct i2c_device_id ds1200_id[] = {
|
||||||
|
{"ds1200", 0},
|
||||||
|
{}
|
||||||
|
};
|
||||||
|
|
||||||
|
MODULE_DEVICE_TABLE(i2c, ds1200_id);
|
||||||
|
|
||||||
|
/* This is the driver that will be inserted */
|
||||||
|
static struct i2c_driver ds1200_driver = {
|
||||||
|
.driver = {
|
||||||
|
.name = "ds1200",
|
||||||
|
},
|
||||||
|
.probe = ds1200_probe,
|
||||||
|
.remove = ds1200_remove,
|
||||||
|
.id_table = ds1200_id,
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __init ds1200_init(void)
|
||||||
|
{
|
||||||
|
return i2c_add_driver(&ds1200_driver);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void __exit ds1200_exit(void)
|
||||||
|
{
|
||||||
|
i2c_del_driver(&ds1200_driver);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
Sysfs entries
|
||||||
|
-------------
|
||||||
|
|
||||||
|
When probing the chip, the driver identifies which PMBus registers are
|
||||||
|
supported, and determines available sensors from this information.
|
||||||
|
Attribute files only exist if respective sensors are suported by the chip.
|
||||||
|
Labels are provided to inform the user about the sensor associated with
|
||||||
|
a given sysfs entry.
|
||||||
|
|
||||||
|
The following attributes are supported. Limits are read-write; all other
|
||||||
|
attributes are read-only.
|
||||||
|
|
||||||
|
inX_input Measured voltage. From READ_VIN or READ_VOUT register.
|
||||||
|
inX_min Minumum Voltage.
|
||||||
|
From VIN_UV_WARN_LIMIT or VOUT_UV_WARN_LIMIT register.
|
||||||
|
inX_max Maximum voltage.
|
||||||
|
From VIN_OV_WARN_LIMIT or VOUT_OV_WARN_LIMIT register.
|
||||||
|
inX_lcrit Critical minumum Voltage.
|
||||||
|
From VIN_UV_FAULT_LIMIT or VOUT_UV_FAULT_LIMIT register.
|
||||||
|
inX_crit Critical maximum voltage.
|
||||||
|
From VIN_OV_FAULT_LIMIT or VOUT_OV_FAULT_LIMIT register.
|
||||||
|
inX_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
|
||||||
|
inX_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
|
||||||
|
inX_lcrit_alarm Voltage critical low alarm.
|
||||||
|
From VOLTAGE_UV_FAULT status.
|
||||||
|
inX_crit_alarm Voltage critical high alarm.
|
||||||
|
From VOLTAGE_OV_FAULT status.
|
||||||
|
inX_label "vin", "vcap", or "voutY"
|
||||||
|
|
||||||
|
currX_input Measured current. From READ_IIN or READ_IOUT register.
|
||||||
|
currX_max Maximum current.
|
||||||
|
From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT register.
|
||||||
|
currX_lcrit Critical minumum output current.
|
||||||
|
From IOUT_UC_FAULT_LIMIT register.
|
||||||
|
currX_crit Critical maximum current.
|
||||||
|
From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register.
|
||||||
|
currX_alarm Current high alarm.
|
||||||
|
From IIN_OC_WARNING or IOUT_OC_WARNING status.
|
||||||
|
currX_lcrit_alarm Output current critical low alarm.
|
||||||
|
From IOUT_UC_FAULT status.
|
||||||
|
currX_crit_alarm Current critical high alarm.
|
||||||
|
From IIN_OC_FAULT or IOUT_OC_FAULT status.
|
||||||
|
currX_label "iin" or "vinY"
|
||||||
|
|
||||||
|
powerX_input Measured power. From READ_PIN or READ_POUT register.
|
||||||
|
powerX_cap Output power cap. From POUT_MAX register.
|
||||||
|
powerX_max Power limit. From PIN_OP_WARN_LIMIT or
|
||||||
|
POUT_OP_WARN_LIMIT register.
|
||||||
|
powerX_crit Critical output power limit.
|
||||||
|
From POUT_OP_FAULT_LIMIT register.
|
||||||
|
powerX_alarm Power high alarm.
|
||||||
|
From PIN_OP_WARNING or POUT_OP_WARNING status.
|
||||||
|
powerX_crit_alarm Output power critical high alarm.
|
||||||
|
From POUT_OP_FAULT status.
|
||||||
|
powerX_label "pin" or "poutY"
|
||||||
|
|
||||||
|
tempX_input Measured tempererature.
|
||||||
|
From READ_TEMPERATURE_X register.
|
||||||
|
tempX_min Mimimum tempererature. From UT_WARN_LIMIT register.
|
||||||
|
tempX_max Maximum tempererature. From OT_WARN_LIMIT register.
|
||||||
|
tempX_lcrit Critical low tempererature.
|
||||||
|
From UT_FAULT_LIMIT register.
|
||||||
|
tempX_crit Critical high tempererature.
|
||||||
|
From OT_FAULT_LIMIT register.
|
||||||
|
tempX_min_alarm Chip temperature low alarm. Set by comparing
|
||||||
|
READ_TEMPERATURE_X with UT_WARN_LIMIT if
|
||||||
|
TEMP_UT_WARNING status is set.
|
||||||
|
tempX_max_alarm Chip temperature high alarm. Set by comparing
|
||||||
|
READ_TEMPERATURE_X with OT_WARN_LIMIT if
|
||||||
|
TEMP_OT_WARNING status is set.
|
||||||
|
tempX_lcrit_alarm Chip temperature critical low alarm. Set by comparing
|
||||||
|
READ_TEMPERATURE_X with UT_FAULT_LIMIT if
|
||||||
|
TEMP_UT_FAULT status is set.
|
||||||
|
tempX_crit_alarm Chip temperature critical high alarm. Set by comparing
|
||||||
|
READ_TEMPERATURE_X with OT_FAULT_LIMIT if
|
||||||
|
TEMP_OT_FAULT status is set.
|
||||||
Loading…
Reference in New Issue
Block a user