iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

[PATCH] dead code removed in hp100

Browse Source 
for mode 2 (memory-mapped) we always set ->mem_ptr_virt; dead code removed.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This commit is contained in:
Al Viro 2005-12-22 14:52:52 -05:00
parent 0018dfa48e
commit 450d86dff3
1 changed files with 8 additions and 22 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
drivers/net/hp100.c
View File

@ -1718,17 +1718,10 @@ static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev)
hp100_outw(i, FRAGMENT_LEN); /* and first/only fragment length */
if (lp->mode == 2) { /* memory mapped */
if (lp->mem_ptr_virt) { /* high pci memory was remapped */
/* Note: The J2585B needs alignment to 32bits here! */
memcpy_toio(lp->mem_ptr_virt, skb->data, (skb->len + 3) & ~3);
if (!ok_flag)
memset_io(lp->mem_ptr_virt, 0, HP100_MIN_PACKET_SIZE - skb->len);
} else {
/* Note: The J2585B needs alignment to 32bits here! */
isa_memcpy_toio(lp->mem_ptr_phys, skb->data, (skb->len + 3) & ~3);
if (!ok_flag)
isa_memset_io(lp->mem_ptr_phys, 0, HP100_MIN_PACKET_SIZE - skb->len);
}
/* Note: The J2585B needs alignment to 32bits here! */
memcpy_toio(lp->mem_ptr_virt, skb->data, (skb->len + 3) & ~3);
if (!ok_flag)
memset_io(lp->mem_ptr_virt, 0, HP100_MIN_PACKET_SIZE - skb->len);
} else { /* programmed i/o */
outsl(ioaddr + HP100_REG_DATA32, skb->data,
(skb->len + 3) >> 2);
@ -1798,10 +1791,7 @@ static void hp100_rx(struct net_device *dev)
/* First we get the header, which contains information about the */
/* actual length of the received packet. */
if (lp->mode == 2) { /* memory mapped mode */
if (lp->mem_ptr_virt) /* if memory was remapped */
header = readl(lp->mem_ptr_virt);
else
header = isa_readl(lp->mem_ptr_phys);
header = readl(lp->mem_ptr_virt);
} else /* programmed i/o */
header = hp100_inl(DATA32);
@ -1833,13 +1823,9 @@ static void hp100_rx(struct net_device *dev)
ptr = skb->data;
/* Now transfer the data from the card into that area */
if (lp->mode == 2) {
if (lp->mem_ptr_virt)
memcpy_fromio(ptr, lp->mem_ptr_virt,pkt_len);
/* Note alignment to 32bit transfers */
else
isa_memcpy_fromio(ptr, lp->mem_ptr_phys, pkt_len);
} else /* io mapped */
if (lp->mode == 2)
memcpy_fromio(ptr, lp->mem_ptr_virt,pkt_len);
else /* io mapped */
insl(ioaddr + HP100_REG_DATA32, ptr, pkt_len >> 2);
skb->protocol = eth_type_trans(skb, dev);