rapidio/tsi721_dma: fix hardware error handling

Add DMA channel re-initialization after an error to avoid termination of
all pending transfer requests.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Reported-by: Barry Wood <barry.wood@idt.com>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Alexandre Bounine 2016-03-22 14:27:05 -07:00 committed by Linus Torvalds
parent e680b672a2
commit 458bdf6e39

View File

@ -282,7 +282,7 @@ void tsi721_bdma_handler(struct tsi721_bdma_chan *bdma_chan)
/* Disable BDMA channel interrupts */
iowrite32(0, bdma_chan->regs + TSI721_DMAC_INTE);
if (bdma_chan->active)
tasklet_schedule(&bdma_chan->tasklet);
tasklet_hi_schedule(&bdma_chan->tasklet);
}
#ifdef CONFIG_PCI_MSI
@ -298,7 +298,7 @@ static irqreturn_t tsi721_bdma_msix(int irq, void *ptr)
struct tsi721_bdma_chan *bdma_chan = ptr;
if (bdma_chan->active)
tasklet_schedule(&bdma_chan->tasklet);
tasklet_hi_schedule(&bdma_chan->tasklet);
return IRQ_HANDLED;
}
#endif /* CONFIG_PCI_MSI */
@ -584,13 +584,71 @@ static void tsi721_dma_tasklet(unsigned long data)
iowrite32(dmac_int, bdma_chan->regs + TSI721_DMAC_INT);
if (dmac_int & TSI721_DMAC_INT_ERR) {
int i = 10000;
struct tsi721_tx_desc *desc;
desc = bdma_chan->active_tx;
dmac_sts = ioread32(bdma_chan->regs + TSI721_DMAC_STS);
tsi_err(&bdma_chan->dchan.dev->device,
"ERR - DMAC%d_STS = 0x%x",
bdma_chan->id, dmac_sts);
"DMAC%d_STS = 0x%x did=%d raddr=0x%llx",
bdma_chan->id, dmac_sts, desc->destid, desc->rio_addr);
/* Re-initialize DMA channel if possible */
if ((dmac_sts & TSI721_DMAC_STS_ABORT) == 0)
goto err_out;
tsi721_clr_stat(bdma_chan);
spin_lock(&bdma_chan->lock);
/* Put DMA channel into init state */
iowrite32(TSI721_DMAC_CTL_INIT,
bdma_chan->regs + TSI721_DMAC_CTL);
do {
udelay(1);
dmac_sts = ioread32(bdma_chan->regs + TSI721_DMAC_STS);
i--;
} while ((dmac_sts & TSI721_DMAC_STS_ABORT) && i);
if (dmac_sts & TSI721_DMAC_STS_ABORT) {
tsi_err(&bdma_chan->dchan.dev->device,
"Failed to re-initiate DMAC%d", bdma_chan->id);
spin_unlock(&bdma_chan->lock);
goto err_out;
}
/* Setup DMA descriptor pointers */
iowrite32(((u64)bdma_chan->bd_phys >> 32),
bdma_chan->regs + TSI721_DMAC_DPTRH);
iowrite32(((u64)bdma_chan->bd_phys & TSI721_DMAC_DPTRL_MASK),
bdma_chan->regs + TSI721_DMAC_DPTRL);
/* Setup descriptor status FIFO */
iowrite32(((u64)bdma_chan->sts_phys >> 32),
bdma_chan->regs + TSI721_DMAC_DSBH);
iowrite32(((u64)bdma_chan->sts_phys & TSI721_DMAC_DSBL_MASK),
bdma_chan->regs + TSI721_DMAC_DSBL);
iowrite32(TSI721_DMAC_DSSZ_SIZE(bdma_chan->sts_size),
bdma_chan->regs + TSI721_DMAC_DSSZ);
/* Clear interrupt bits */
iowrite32(TSI721_DMAC_INT_ALL,
bdma_chan->regs + TSI721_DMAC_INT);
ioread32(bdma_chan->regs + TSI721_DMAC_INT);
bdma_chan->wr_count = bdma_chan->wr_count_next = 0;
bdma_chan->sts_rdptr = 0;
udelay(10);
desc = bdma_chan->active_tx;
desc->status = DMA_ERROR;
dma_cookie_complete(&desc->txd);
list_add(&desc->desc_node, &bdma_chan->free_list);
bdma_chan->active_tx = NULL;
if (bdma_chan->active)
tsi721_advance_work(bdma_chan, NULL);
spin_unlock(&bdma_chan->lock);
}
@ -619,16 +677,19 @@ static void tsi721_dma_tasklet(unsigned long data)
}
list_add(&desc->desc_node, &bdma_chan->free_list);
bdma_chan->active_tx = NULL;
tsi721_advance_work(bdma_chan, NULL);
if (bdma_chan->active)
tsi721_advance_work(bdma_chan, NULL);
spin_unlock(&bdma_chan->lock);
if (callback)
callback(param);
} else {
tsi721_advance_work(bdma_chan, bdma_chan->active_tx);
if (bdma_chan->active)
tsi721_advance_work(bdma_chan,
bdma_chan->active_tx);
spin_unlock(&bdma_chan->lock);
}
}
err_out:
/* Re-Enable BDMA channel interrupts */
iowrite32(TSI721_DMAC_INT_ALL, bdma_chan->regs + TSI721_DMAC_INTE);
}
@ -841,7 +902,6 @@ static int tsi721_terminate_all(struct dma_chan *dchan)
{
struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
struct tsi721_tx_desc *desc, *_d;
u32 dmac_int;
LIST_HEAD(list);
tsi_debug(DMA, &dchan->dev->device, "DMAC%d", bdma_chan->id);
@ -850,7 +910,10 @@ static int tsi721_terminate_all(struct dma_chan *dchan)
bdma_chan->active = false;
if (!tsi721_dma_is_idle(bdma_chan)) {
while (!tsi721_dma_is_idle(bdma_chan)) {
udelay(5);
#if (0)
/* make sure to stop the transfer */
iowrite32(TSI721_DMAC_CTL_SUSP,
bdma_chan->regs + TSI721_DMAC_CTL);
@ -859,6 +922,7 @@ static int tsi721_terminate_all(struct dma_chan *dchan)
do {
dmac_int = ioread32(bdma_chan->regs + TSI721_DMAC_INT);
} while ((dmac_int & TSI721_DMAC_INT_SUSP) == 0);
#endif
}
if (bdma_chan->active_tx)