From 4640efc01d5ab2f5c918cd2683f9c6208c8c637f Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Thu, 17 May 2018 10:29:39 +0200 Subject: [PATCH] arm64: dts: marvell: 7040-db: describe the 10G interface as fixed-link This patch adds a fixed-link node to the 10G interface of the 7040-db board. This is required as the mvpp2 driver now uses phylink. The best solution would have been to describe the SFP cage but they are not wired correctly, and thus unusable, so we chose to use fixed-link instead. Signed-off-by: Antoine Tenart Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-7040-db.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index d6bec058a30a..412efdb46e7c 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -242,6 +242,11 @@ phy-mode = "10gbase-kr"; /* Generic PHY, providing serdes lanes */ phys = <&cp0_comphy2 0>; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; &cp0_eth1 {