Staging: hv: move hyperv code out of staging directory

After many years wandering the desert, it is finally time for the
Microsoft HyperV code to move out of the staging directory.  Or at least
the core hyperv bus code, and the utility driver, the rest still have
some review to get through by the various subsystem maintainers.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>

drivers/Kconfig

@@ -130,4 +130,6 @@ source "drivers/iommu/Kconfig"
 
 source "drivers/virt/Kconfig"
 
+source "drivers/hv/Kconfig"
+
 endmenu

drivers/Makefile

@@ -127,3 +127,5 @@ obj-$(CONFIG_IOMMU_SUPPORT)	+= iommu/
 
 # Virtualization drivers
 obj-$(CONFIG_VIRT_DRIVERS)	+= virt/
+obj-$(CONFIG_HYPERV)		+= hv/
+

drivers/hv/Kconfig

@@ -0,0 +1,14 @@
+config HYPERV
+	tristate "Microsoft Hyper-V client drivers"
+	depends on X86 && ACPI && PCI
+	help
+	  Select this option to run Linux as a Hyper-V client operating
+	  system.
+
+config HYPERV_UTILS
+	tristate "Microsoft Hyper-V Utilities driver"
+	depends on HYPERV && CONNECTOR && NLS
+	help
+	  Select this option to enable the Hyper-V Utilities.
+
+

drivers/hv/Makefile

@@ -0,0 +1,7 @@
+obj-$(CONFIG_HYPERV)		+= hv_vmbus.o
+obj-$(CONFIG_HYPERV_UTILS)	+= hv_utils.o
+
+hv_vmbus-y := vmbus_drv.o \
+		 hv.o connection.o channel.o \
+		 channel_mgmt.o ring_buffer.o
+hv_utils-y := hv_util.o hv_kvp.o

drivers/hv/channel.c

@@ -26,8 +26,8 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/hyperv.h>
 
-#include "hyperv.h"
 #include "hyperv_vmbus.h"
 
 #define NUM_PAGES_SPANNED(addr, len) \

drivers/hv/channel_mgmt.c

@@ -28,8 +28,8 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/completion.h>
+#include <linux/hyperv.h>
 
-#include "hyperv.h"
 #include "hyperv_vmbus.h"
 
 struct vmbus_channel_message_table_entry {

drivers/hv/connection.c

@@ -29,8 +29,8 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
+#include <linux/hyperv.h>
 
-#include "hyperv.h"
 #include "hyperv_vmbus.h"
 
 

drivers/hv/hv.c

@@ -25,8 +25,8 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
+#include <linux/hyperv.h>
 
-#include "hyperv.h"
 #include "hyperv_vmbus.h"
 
 /* The one and only */

drivers/hv/hv_kvp.c

@@ -26,8 +26,8 @@
 #include <linux/nls.h>
 #include <linux/connector.h>
 #include <linux/workqueue.h>
+#include <linux/hyperv.h>
 
-#include "hyperv.h"
 #include "hv_kvp.h"
 
 

drivers/hv/hv_util.c

@@ -26,8 +26,8 @@
 #include <linux/slab.h>
 #include <linux/sysctl.h>
 #include <linux/reboot.h>
+#include <linux/hyperv.h>
 
-#include "hyperv.h"
 #include "hv_kvp.h"
 
 

drivers/hv/hyperv_vmbus.h

@@ -28,8 +28,7 @@
 #include <linux/list.h>
 #include <asm/sync_bitops.h>
 #include <linux/atomic.h>
-
-#include "hyperv.h"
+#include <linux/hyperv.h>
 
 /*
  * The below CPUID leaves are present if VersionAndFeatures.HypervisorPresent

drivers/hv/ring_buffer.c

@@ -25,8 +25,8 @@
 
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/hyperv.h>
 
-#include "hyperv.h"
 #include "hyperv_vmbus.h"
 
 

drivers/hv/vmbus_drv.c

@@ -32,8 +32,8 @@
 #include <linux/acpi.h>
 #include <acpi/acpi_bus.h>
 #include <linux/completion.h>
+#include <linux/hyperv.h>
 
-#include "hyperv.h"
 #include "hyperv_vmbus.h"
 
 

drivers/staging/hv/Kconfig

@@ -1,39 +1,17 @@
-config HYPERV
-	tristate "Microsoft Hyper-V client drivers"
-	depends on X86 && ACPI && PCI
-	default n
-	help
-	  Select this option to run Linux as a Hyper-V client operating
-	  system.
-
-if HYPERV
-
 config HYPERV_STORAGE
 	tristate "Microsoft Hyper-V virtual storage driver"
-	depends on SCSI
-	default HYPERV
+	depends on HYPERV && SCSI
 	help
 	 Select this option to enable the Hyper-V virtual storage driver.
 
 config HYPERV_NET
 	tristate "Microsoft Hyper-V virtual network driver"
-	depends on NET
-	default HYPERV
+	depends on HYPERV && NET
 	help
 	  Select this option to enable the Hyper-V virtual network driver.
 
-config HYPERV_UTILS
-	tristate "Microsoft Hyper-V Utilities driver"
-	depends on CONNECTOR && NLS
-	default HYPERV
-	help
-	  Select this option to enable the Hyper-V Utilities.
-
 config HYPERV_MOUSE
 	tristate "Microsoft Hyper-V mouse driver"
-	depends on HID
-	default HYPERV
+	depends on HYPERV && HID
 	help
 	  Select this option to enable the Hyper-V mouse driver.
-
-endif

drivers/staging/hv/Makefile

@@ -1,12 +1,7 @@
-obj-$(CONFIG_HYPERV)		+= hv_vmbus.o hv_timesource.o
+obj-$(CONFIG_HYPERV)		+= hv_timesource.o
 obj-$(CONFIG_HYPERV_STORAGE)	+= hv_storvsc.o
 obj-$(CONFIG_HYPERV_NET)	+= hv_netvsc.o
-obj-$(CONFIG_HYPERV_UTILS)	+= hv_utils.o
 obj-$(CONFIG_HYPERV_MOUSE)	+= hv_mouse.o
 
-hv_vmbus-y := vmbus_drv.o \
-		 hv.o connection.o channel.o \
-		 channel_mgmt.o ring_buffer.o
 hv_storvsc-y := storvsc_drv.o
 hv_netvsc-y := netvsc_drv.o netvsc.o rndis_filter.o
-hv_utils-y := hv_util.o hv_kvp.o

drivers/staging/hv/hv_mouse.c

@@ -22,8 +22,7 @@
 #include <linux/input.h>
 #include <linux/hid.h>
 #include <linux/hiddev.h>
-
-#include "hyperv.h"
+#include <linux/hyperv.h>
 
 
 struct hv_input_dev_info {

drivers/staging/hv/hyperv_net.h

@@ -26,7 +26,7 @@
 #define _HYPERV_NET_H
 
 #include <linux/list.h>
-#include "hyperv.h"
+#include <linux/hyperv.h>
 
 /* Fwd declaration */
 struct hv_netvsc_packet;

drivers/staging/hv/storvsc_drv.c

@@ -31,6 +31,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/device.h>
+#include <linux/hyperv.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_host.h>
@@ -40,7 +41,6 @@
 #include <scsi/scsi_devinfo.h>
 #include <scsi/scsi_dbg.h>
 
-#include "hyperv.h"
 
 #define STORVSC_RING_BUFFER_SIZE			(20*PAGE_SIZE)
 static int storvsc_ringbuffer_size = STORVSC_RING_BUFFER_SIZE;