iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ath10k: support get/set antenna configurations.

Browse Source 
Verified that target's tx/rx chain register is set appropriately,
and that the tx rate goes down as number of chains
decrease, but I did not actually try to verify antenna
ceased to transmit when disabled.

kvalo: move ar->supp_*_chainmask initialisation to ath10k_mac_register()

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
This commit is contained in:
Ben Greear 2014-05-16 17:15:38 +03:00 committed by Kalle Valo
parent eeab266c0f
commit 46acf7bb9b
2 changed files with 86 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
drivers/net/wireless/ath/ath10k/core.h
View File

@ -440,6 +440,12 @@ struct ath10k {
bool radar_enabled;
int num_started_vdevs;
/* Protected by conf-mutex */
u8 supp_tx_chainmask;
u8 supp_rx_chainmask;
u8 cfg_tx_chainmask;
u8 cfg_rx_chainmask;
struct wmi_pdev_set_wmm_params_arg wmm_params;
struct completion install_key_done;

80
drivers/net/wireless/ath/ath10k/mac.c
View File

@ -2332,6 +2332,68 @@ void ath10k_halt(struct ath10k *ar)
spin_unlock_bh(&ar->data_lock);
}
static int ath10k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
{
struct ath10k *ar = hw->priv;
mutex_lock(&ar->conf_mutex);
if (ar->cfg_tx_chainmask) {
*tx_ant = ar->cfg_tx_chainmask;
*rx_ant = ar->cfg_rx_chainmask;
} else {
*tx_ant = ar->supp_tx_chainmask;
*rx_ant = ar->supp_rx_chainmask;
}
mutex_unlock(&ar->conf_mutex);
return 0;
}
static int __ath10k_set_antenna(struct ath10k *ar, u32 tx_ant, u32 rx_ant)
{
int ret;
lockdep_assert_held(&ar->conf_mutex);
ar->cfg_tx_chainmask = tx_ant;
ar->cfg_rx_chainmask = rx_ant;
if ((ar->state != ATH10K_STATE_ON) &&
(ar->state != ATH10K_STATE_RESTARTED))
return 0;
ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->tx_chain_mask,
tx_ant);
if (ret) {
ath10k_warn("failed to set tx-chainmask: %d, req 0x%x\n",
ret, tx_ant);
return ret;
}
ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->rx_chain_mask,
rx_ant);
if (ret) {
ath10k_warn("failed to set rx-chainmask: %d, req 0x%x\n",
ret, rx_ant);
return ret;
}
return 0;
}
static int ath10k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
{
struct ath10k *ar = hw->priv;
int ret;
mutex_lock(&ar->conf_mutex);
ret = __ath10k_set_antenna(ar, tx_ant, rx_ant);
mutex_unlock(&ar->conf_mutex);
return ret;
}
static int ath10k_start(struct ieee80211_hw *hw)
{
struct ath10k *ar = hw->priv;
@ -2373,6 +2435,10 @@ static int ath10k_start(struct ieee80211_hw *hw)
if (ret)
ath10k_warn("failed to enable dynamic BW: %d\n", ret);
if (ar->cfg_tx_chainmask)
__ath10k_set_antenna(ar, ar->cfg_tx_chainmask,
ar->cfg_rx_chainmask);
/*
* By default FW set ARP frames ac to voice (6). In that case ARP
* exchange is not working properly for UAPSD enabled AP. ARP requests
@ -4256,6 +4322,8 @@ static const struct ieee80211_ops ath10k_ops = {
.set_frag_threshold = ath10k_set_frag_threshold,
.flush = ath10k_flush,
.tx_last_beacon = ath10k_tx_last_beacon,
.set_antenna = ath10k_set_antenna,
.get_antenna = ath10k_get_antenna,
.restart_complete = ath10k_restart_complete,
.get_survey = ath10k_get_survey,
.set_bitrate_mask = ath10k_set_bitrate_mask,
@ -4605,6 +4673,18 @@ int ath10k_mac_register(struct ath10k *ar)
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_AP);
if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) {
/* TODO: Have to deal with 2x2 chips if/when the come out. */
ar->supp_tx_chainmask = TARGET_10X_TX_CHAIN_MASK;
ar->supp_rx_chainmask = TARGET_10X_RX_CHAIN_MASK;
} else {
ar->supp_tx_chainmask = TARGET_TX_CHAIN_MASK;
ar->supp_rx_chainmask = TARGET_RX_CHAIN_MASK;
}
ar->hw->wiphy->available_antennas_rx = ar->supp_rx_chainmask;
ar->hw->wiphy->available_antennas_tx = ar->supp_tx_chainmask;
if (!test_bit(ATH10K_FW_FEATURE_NO_P2P, ar->fw_features))
ar->hw->wiphy->interface_modes |=
BIT(NL80211_IFTYPE_P2P_CLIENT) |