drm/msm/dpu: use drm_dsc_config instead of msm_display_dsc_config
There is no need to use the struct msm_display_dsc_config wrapper inside the dpu driver, use the struct drm_dsc_config directly to pass pps data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/493340/ Link: https://lore.kernel.org/r/20220711100432.455268-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
This commit is contained in:
parent
323894610b
commit
46dd0c0658
@ -162,7 +162,7 @@ enum dpu_enc_rc_states {
|
||||
* @vsync_event_work: worker to handle vsync event for autorefresh
|
||||
* @topology: topology of the display
|
||||
* @idle_timeout: idle timeout duration in milliseconds
|
||||
* @dsc: msm_display_dsc_config pointer, for DSC-enabled encoders
|
||||
* @dsc: drm_dsc_config pointer, for DSC-enabled encoders
|
||||
*/
|
||||
struct dpu_encoder_virt {
|
||||
struct drm_encoder base;
|
||||
@ -208,7 +208,7 @@ struct dpu_encoder_virt {
|
||||
bool wide_bus_en;
|
||||
|
||||
/* DSC configuration */
|
||||
struct msm_display_dsc_config *dsc;
|
||||
struct drm_dsc_config *dsc;
|
||||
};
|
||||
|
||||
#define to_dpu_encoder_virt(x) container_of(x, struct dpu_encoder_virt, base)
|
||||
@ -1791,12 +1791,12 @@ static void dpu_encoder_vsync_event_work_handler(struct kthread_work *work)
|
||||
}
|
||||
|
||||
static u32
|
||||
dpu_encoder_dsc_initial_line_calc(struct msm_display_dsc_config *dsc,
|
||||
dpu_encoder_dsc_initial_line_calc(struct drm_dsc_config *dsc,
|
||||
u32 enc_ip_width)
|
||||
{
|
||||
int ssm_delay, total_pixels, soft_slice_per_enc;
|
||||
|
||||
soft_slice_per_enc = enc_ip_width / dsc->drm->slice_width;
|
||||
soft_slice_per_enc = enc_ip_width / dsc->slice_width;
|
||||
|
||||
/*
|
||||
* minimum number of initial line pixels is a sum of:
|
||||
@ -1808,16 +1808,16 @@ dpu_encoder_dsc_initial_line_calc(struct msm_display_dsc_config *dsc,
|
||||
* 5. 6 additional pixels as the output of the rate buffer is
|
||||
* 48 bits wide
|
||||
*/
|
||||
ssm_delay = ((dsc->drm->bits_per_component < 10) ? 84 : 92);
|
||||
total_pixels = ssm_delay * 3 + dsc->drm->initial_xmit_delay + 47;
|
||||
ssm_delay = ((dsc->bits_per_component < 10) ? 84 : 92);
|
||||
total_pixels = ssm_delay * 3 + dsc->initial_xmit_delay + 47;
|
||||
if (soft_slice_per_enc > 1)
|
||||
total_pixels += (ssm_delay * 3);
|
||||
return DIV_ROUND_UP(total_pixels, dsc->drm->slice_width);
|
||||
return DIV_ROUND_UP(total_pixels, dsc->slice_width);
|
||||
}
|
||||
|
||||
static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_dsc *hw_dsc,
|
||||
struct dpu_hw_pingpong *hw_pp,
|
||||
struct msm_display_dsc_config *dsc,
|
||||
struct drm_dsc_config *dsc,
|
||||
u32 common_mode,
|
||||
u32 initial_lines)
|
||||
{
|
||||
@ -1835,7 +1835,7 @@ static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_dsc *hw_dsc,
|
||||
}
|
||||
|
||||
static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc,
|
||||
struct msm_display_dsc_config *dsc)
|
||||
struct drm_dsc_config *dsc)
|
||||
{
|
||||
/* coding only for 2LM, 2enc, 1 dsc config */
|
||||
struct dpu_encoder_phys *enc_master = dpu_enc->cur_master;
|
||||
@ -1858,14 +1858,15 @@ static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc,
|
||||
}
|
||||
}
|
||||
|
||||
pic_width = dsc->drm->pic_width;
|
||||
dsc_common_mode = 0;
|
||||
pic_width = dsc->pic_width;
|
||||
|
||||
dsc_common_mode = DSC_MODE_MULTIPLEX | DSC_MODE_SPLIT_PANEL;
|
||||
if (enc_master->intf_mode == INTF_MODE_VIDEO)
|
||||
dsc_common_mode |= DSC_MODE_VIDEO;
|
||||
|
||||
this_frame_slices = pic_width / dsc->drm->slice_width;
|
||||
intf_ip_w = this_frame_slices * dsc->drm->slice_width;
|
||||
this_frame_slices = pic_width / dsc->slice_width;
|
||||
intf_ip_w = this_frame_slices * dsc->slice_width;
|
||||
|
||||
/*
|
||||
* dsc merge case: when using 2 encoders for the same stream,
|
||||
|
@ -36,7 +36,7 @@ struct msm_display_info {
|
||||
uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY];
|
||||
bool is_cmd_mode;
|
||||
bool is_te_using_watchdog_timer;
|
||||
struct msm_display_dsc_config *dsc;
|
||||
struct drm_dsc_config *dsc;
|
||||
};
|
||||
|
||||
/**
|
||||
|
@ -37,7 +37,7 @@ static void dpu_hw_dsc_disable(struct dpu_hw_dsc *dsc)
|
||||
}
|
||||
|
||||
static void dpu_hw_dsc_config(struct dpu_hw_dsc *hw_dsc,
|
||||
struct msm_display_dsc_config *dsc,
|
||||
struct drm_dsc_config *dsc,
|
||||
u32 mode,
|
||||
u32 initial_lines)
|
||||
{
|
||||
@ -52,89 +52,89 @@ static void dpu_hw_dsc_config(struct dpu_hw_dsc *hw_dsc,
|
||||
if (is_cmd_mode)
|
||||
initial_lines += 1;
|
||||
|
||||
slice_last_group_size = 3 - (dsc->drm->slice_width % 3);
|
||||
slice_last_group_size = 3 - (dsc->slice_width % 3);
|
||||
data = (initial_lines << 20);
|
||||
data |= ((slice_last_group_size - 1) << 18);
|
||||
/* bpp is 6.4 format, 4 LSBs bits are for fractional part */
|
||||
data |= dsc->drm->bits_per_pixel << 12;
|
||||
lsb = dsc->drm->bits_per_pixel % 4;
|
||||
bpp = dsc->drm->bits_per_pixel / 4;
|
||||
data |= dsc->bits_per_pixel << 12;
|
||||
lsb = dsc->bits_per_pixel % 4;
|
||||
bpp = dsc->bits_per_pixel / 4;
|
||||
bpp *= 4;
|
||||
bpp <<= 4;
|
||||
bpp |= lsb;
|
||||
|
||||
data |= bpp << 8;
|
||||
data |= (dsc->drm->block_pred_enable << 7);
|
||||
data |= (dsc->drm->line_buf_depth << 3);
|
||||
data |= (dsc->drm->simple_422 << 2);
|
||||
data |= (dsc->drm->convert_rgb << 1);
|
||||
data |= dsc->drm->bits_per_component;
|
||||
data |= (dsc->block_pred_enable << 7);
|
||||
data |= (dsc->line_buf_depth << 3);
|
||||
data |= (dsc->simple_422 << 2);
|
||||
data |= (dsc->convert_rgb << 1);
|
||||
data |= dsc->bits_per_component;
|
||||
|
||||
DPU_REG_WRITE(c, DSC_ENC, data);
|
||||
|
||||
data = dsc->drm->pic_width << 16;
|
||||
data |= dsc->drm->pic_height;
|
||||
data = dsc->pic_width << 16;
|
||||
data |= dsc->pic_height;
|
||||
DPU_REG_WRITE(c, DSC_PICTURE, data);
|
||||
|
||||
data = dsc->drm->slice_width << 16;
|
||||
data |= dsc->drm->slice_height;
|
||||
data = dsc->slice_width << 16;
|
||||
data |= dsc->slice_height;
|
||||
DPU_REG_WRITE(c, DSC_SLICE, data);
|
||||
|
||||
data = dsc->drm->slice_chunk_size << 16;
|
||||
data = dsc->slice_chunk_size << 16;
|
||||
DPU_REG_WRITE(c, DSC_CHUNK_SIZE, data);
|
||||
|
||||
data = dsc->drm->initial_dec_delay << 16;
|
||||
data |= dsc->drm->initial_xmit_delay;
|
||||
data = dsc->initial_dec_delay << 16;
|
||||
data |= dsc->initial_xmit_delay;
|
||||
DPU_REG_WRITE(c, DSC_DELAY, data);
|
||||
|
||||
data = dsc->drm->initial_scale_value;
|
||||
data = dsc->initial_scale_value;
|
||||
DPU_REG_WRITE(c, DSC_SCALE_INITIAL, data);
|
||||
|
||||
data = dsc->drm->scale_decrement_interval;
|
||||
data = dsc->scale_decrement_interval;
|
||||
DPU_REG_WRITE(c, DSC_SCALE_DEC_INTERVAL, data);
|
||||
|
||||
data = dsc->drm->scale_increment_interval;
|
||||
data = dsc->scale_increment_interval;
|
||||
DPU_REG_WRITE(c, DSC_SCALE_INC_INTERVAL, data);
|
||||
|
||||
data = dsc->drm->first_line_bpg_offset;
|
||||
data = dsc->first_line_bpg_offset;
|
||||
DPU_REG_WRITE(c, DSC_FIRST_LINE_BPG_OFFSET, data);
|
||||
|
||||
data = dsc->drm->nfl_bpg_offset << 16;
|
||||
data |= dsc->drm->slice_bpg_offset;
|
||||
data = dsc->nfl_bpg_offset << 16;
|
||||
data |= dsc->slice_bpg_offset;
|
||||
DPU_REG_WRITE(c, DSC_BPG_OFFSET, data);
|
||||
|
||||
data = dsc->drm->initial_offset << 16;
|
||||
data |= dsc->drm->final_offset;
|
||||
data = dsc->initial_offset << 16;
|
||||
data |= dsc->final_offset;
|
||||
DPU_REG_WRITE(c, DSC_DSC_OFFSET, data);
|
||||
|
||||
det_thresh_flatness = 7 + 2 * (dsc->drm->bits_per_component - 8);
|
||||
det_thresh_flatness = 7 + 2 * (dsc->bits_per_component - 8);
|
||||
data = det_thresh_flatness << 10;
|
||||
data |= dsc->drm->flatness_max_qp << 5;
|
||||
data |= dsc->drm->flatness_min_qp;
|
||||
data |= dsc->flatness_max_qp << 5;
|
||||
data |= dsc->flatness_min_qp;
|
||||
DPU_REG_WRITE(c, DSC_FLATNESS, data);
|
||||
|
||||
data = dsc->drm->rc_model_size;
|
||||
data = dsc->rc_model_size;
|
||||
DPU_REG_WRITE(c, DSC_RC_MODEL_SIZE, data);
|
||||
|
||||
data = dsc->drm->rc_tgt_offset_low << 18;
|
||||
data |= dsc->drm->rc_tgt_offset_high << 14;
|
||||
data |= dsc->drm->rc_quant_incr_limit1 << 9;
|
||||
data |= dsc->drm->rc_quant_incr_limit0 << 4;
|
||||
data |= dsc->drm->rc_edge_factor;
|
||||
data = dsc->rc_tgt_offset_low << 18;
|
||||
data |= dsc->rc_tgt_offset_high << 14;
|
||||
data |= dsc->rc_quant_incr_limit1 << 9;
|
||||
data |= dsc->rc_quant_incr_limit0 << 4;
|
||||
data |= dsc->rc_edge_factor;
|
||||
DPU_REG_WRITE(c, DSC_RC, data);
|
||||
}
|
||||
|
||||
static void dpu_hw_dsc_config_thresh(struct dpu_hw_dsc *hw_dsc,
|
||||
struct msm_display_dsc_config *dsc)
|
||||
struct drm_dsc_config *dsc)
|
||||
{
|
||||
struct drm_dsc_rc_range_parameters *rc = dsc->drm->rc_range_params;
|
||||
struct drm_dsc_rc_range_parameters *rc = dsc->rc_range_params;
|
||||
struct dpu_hw_blk_reg_map *c = &hw_dsc->hw;
|
||||
u32 off;
|
||||
int i;
|
||||
|
||||
off = DSC_RC_BUF_THRESH;
|
||||
for (i = 0; i < DSC_NUM_BUF_RANGES - 1 ; i++) {
|
||||
DPU_REG_WRITE(c, off, dsc->drm->rc_buf_thresh[i]);
|
||||
DPU_REG_WRITE(c, off, dsc->rc_buf_thresh[i]);
|
||||
off += 4;
|
||||
}
|
||||
|
||||
|
@ -31,7 +31,7 @@ struct dpu_hw_dsc_ops {
|
||||
* @initial_lines: amount of initial lines to be used
|
||||
*/
|
||||
void (*dsc_config)(struct dpu_hw_dsc *hw_dsc,
|
||||
struct msm_display_dsc_config *dsc,
|
||||
struct drm_dsc_config *dsc,
|
||||
u32 mode,
|
||||
u32 initial_lines);
|
||||
|
||||
@ -41,7 +41,7 @@ struct dpu_hw_dsc_ops {
|
||||
* @dsc: panel dsc parameters
|
||||
*/
|
||||
void (*dsc_config_thresh)(struct dpu_hw_dsc *hw_dsc,
|
||||
struct msm_display_dsc_config *dsc);
|
||||
struct drm_dsc_config *dsc);
|
||||
};
|
||||
|
||||
struct dpu_hw_dsc {
|
||||
|
@ -585,7 +585,7 @@ static int _dpu_kms_initialize_dsi(struct drm_device *dev,
|
||||
info.h_tile_instance[info.num_of_h_tiles++] = i;
|
||||
info.is_cmd_mode = msm_dsi_is_cmd_mode(priv->dsi[i]);
|
||||
|
||||
info.dsc = msm_dsi_get_dsc_config(priv->dsi[i]);
|
||||
info.dsc = msm_dsi_get_dsc_config(priv->dsi[i])->drm;
|
||||
|
||||
if (msm_dsi_is_bonded_dsi(priv->dsi[i]) && priv->dsi[other]) {
|
||||
rc = msm_dsi_modeset_init(priv->dsi[other], dev, encoder);
|
||||
|
Loading…
x
Reference in New Issue
Block a user