mtd: spi-nor: cadence-quadspi: Fix page fault kernel panic
The current Cadence QSPI driver caused a kernel panic when loading a Root Filesystem from QSPI. The problem was caused by reading more bytes than needed because the QSPI operated on 4 bytes at a time. <snip> [ 7.947754] spi_nor_read[1048]:from 0x037cad74, len 1 [bfe07fff] [ 7.956247] cqspi_read[910]:offset 0x58502516, buffer=bfe07fff [ 7.956247] [ 7.966046] Unable to handle kernel paging request at virtual address bfe08002 [ 7.973239] pgd = eebfc000 [ 7.975931] [bfe08002] *pgd=2fffb811, *pte=00000000, *ppte=00000000 </snip> Notice above how only 1 byte needed to be read but by reading 4 bytes into the end of a mapped page, an unrecoverable page fault occurred. This patch uses a temporary buffer to hold the 4 bytes read and then copies only the bytes required into the buffer. A min() function is used to limit the length to prevent buffer overflows. Request testing of this patch on other platforms. This was tested on the Intel Arria10 SoCFPGA DevKit. Fixes: 0cf1725676a97fc8 ("mtd: spi-nor: cqspi: Fix build on arches missing readsl/writesl") Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Cc: <stable@vger.kernel.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
This commit is contained in:
parent
23566c3798
commit
47016b341f
@ -501,7 +501,9 @@ static int cqspi_indirect_read_execute(struct spi_nor *nor, u8 *rxbuf,
|
||||
void __iomem *reg_base = cqspi->iobase;
|
||||
void __iomem *ahb_base = cqspi->ahb_base;
|
||||
unsigned int remaining = n_rx;
|
||||
unsigned int mod_bytes = n_rx % 4;
|
||||
unsigned int bytes_to_read = 0;
|
||||
u8 *rxbuf_end = rxbuf + n_rx;
|
||||
int ret = 0;
|
||||
|
||||
writel(from_addr, reg_base + CQSPI_REG_INDIRECTRDSTARTADDR);
|
||||
@ -530,11 +532,24 @@ static int cqspi_indirect_read_execute(struct spi_nor *nor, u8 *rxbuf,
|
||||
}
|
||||
|
||||
while (bytes_to_read != 0) {
|
||||
unsigned int word_remain = round_down(remaining, 4);
|
||||
|
||||
bytes_to_read *= cqspi->fifo_width;
|
||||
bytes_to_read = bytes_to_read > remaining ?
|
||||
remaining : bytes_to_read;
|
||||
ioread32_rep(ahb_base, rxbuf,
|
||||
DIV_ROUND_UP(bytes_to_read, 4));
|
||||
bytes_to_read = round_down(bytes_to_read, 4);
|
||||
/* Read 4 byte word chunks then single bytes */
|
||||
if (bytes_to_read) {
|
||||
ioread32_rep(ahb_base, rxbuf,
|
||||
(bytes_to_read / 4));
|
||||
} else if (!word_remain && mod_bytes) {
|
||||
unsigned int temp = ioread32(ahb_base);
|
||||
|
||||
bytes_to_read = mod_bytes;
|
||||
memcpy(rxbuf, &temp, min((unsigned int)
|
||||
(rxbuf_end - rxbuf),
|
||||
bytes_to_read));
|
||||
}
|
||||
rxbuf += bytes_to_read;
|
||||
remaining -= bytes_to_read;
|
||||
bytes_to_read = cqspi_get_rd_sram_level(cqspi);
|
||||
|
Loading…
x
Reference in New Issue
Block a user