From ef1b5bf506b1f0ee3edc98533e1f3ecb105eb46a Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 28 Nov 2018 09:02:41 +0000 Subject: [PATCH 1/2] net: phy: Fix not to call phy_resume() if PHY is not attached This patch fixes an issue that mdio_bus_phy_resume() doesn't call phy_resume() if the PHY is not attached. Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY") Signed-off-by: Yoshihiro Shimoda Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 18e92c19c5ab..c4b9008c52d2 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -220,7 +220,7 @@ static LIST_HEAD(phy_fixup_list); static DEFINE_MUTEX(phy_fixup_lock); #ifdef CONFIG_PM -static bool mdio_bus_phy_may_suspend(struct phy_device *phydev) +static bool mdio_bus_phy_may_suspend(struct phy_device *phydev, bool suspend) { struct device_driver *drv = phydev->mdio.dev.driver; struct phy_driver *phydrv = to_phy_driver(drv); @@ -232,10 +232,11 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev) /* PHY not attached? May suspend if the PHY has not already been * suspended as part of a prior call to phy_disconnect() -> * phy_detach() -> phy_suspend() because the parent netdev might be the - * MDIO bus driver and clock gated at this point. + * MDIO bus driver and clock gated at this point. Also may resume if + * PHY is not attached. */ if (!netdev) - return !phydev->suspended; + return suspend ? !phydev->suspended : phydev->suspended; if (netdev->wol_enabled) return false; @@ -270,7 +271,7 @@ static int mdio_bus_phy_suspend(struct device *dev) if (phydev->attached_dev && phydev->adjust_link) phy_stop_machine(phydev); - if (!mdio_bus_phy_may_suspend(phydev)) + if (!mdio_bus_phy_may_suspend(phydev, true)) return 0; return phy_suspend(phydev); @@ -281,7 +282,7 @@ static int mdio_bus_phy_resume(struct device *dev) struct phy_device *phydev = to_phy_device(dev); int ret; - if (!mdio_bus_phy_may_suspend(phydev)) + if (!mdio_bus_phy_may_suspend(phydev, false)) goto no_resume; ret = phy_resume(phydev); From 8c85f4b81296a530b8af2796c110fa482ac42d4f Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 28 Nov 2018 09:02:42 +0000 Subject: [PATCH 2/2] net: phy: micrel: add toggling phy reset if PHY is not attached This patch adds toggling phy reset if PHY is not attached. Otherwise, some boards (e.g. R-Car H3 Salvator-XS) cannot link up correctly if we do the following method: 1) Kernel boots by using initramfs. --> No open the nic, so phy_device_register() and phy_probe() deasserts the reset. 2) Kernel enters the suspend. --> So, keep the reset signal as deassert. --> On R-Car Salvator-XS board, unfortunately, the board power is turned off. 3) Kernel returns from suspend. 4) ifconfig eth0 up --> Then, since edge signal of the reset doesn't happen, it cannot link up. 5) ifconfig eth0 down 6) ifconfig eth0 up --> In this case, it can link up. Reported-by: Hiromitsu Yamasaki Signed-off-by: Yoshihiro Shimoda Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 9265dea79412..1679a6ea104c 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -23,6 +23,7 @@ * ksz9477 */ +#include #include #include #include @@ -835,6 +836,13 @@ static int kszphy_resume(struct phy_device *phydev) { int ret; + if (!phydev->attached_dev) { + /* If the PHY is not attached, toggle the reset */ + phy_device_reset(phydev, 1); + udelay(1); + phy_device_reset(phydev, 0); + } + genphy_resume(phydev); ret = kszphy_config_reset(phydev);