iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

dmaengine: ste_dma40: physical channels number correction

Browse Source 
DMAC_ICFG[0:2]=SCHNB only allows to count 'multiple of 4' physical
channels so it was ok with platforms having 8 channels but cannot be
used for next versions (with 10 or 14 channels).  This patch allows to
provide the number of physical channels for a DMA device via
platform_data, or still rely on SCHNB if platform_data announces 0
channel.

Signed-off-by: Gerald Baeza <gerald.baeza@stericsson.com>
Reviewed-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
This commit is contained in:
Gerald Baeza 2012-09-21 21:21:37 +02:00 committed by Fabio Baltieri
parent f000df8c5a
commit 47db92f4a6
2 changed files with 15 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
drivers/dma/ste_dma40.c
View File

@ -3004,14 +3004,21 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
* ? has revision 1
* DB8500v1 has revision 2
* DB8500v2 has revision 3
* AP9540v1 has revision 4
* DB8540v1 has revision 4
*/
rev = AMBA_REV_BITS(pid);
/* The number of physical channels on this HW */
num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4;
plat_data = pdev->dev.platform_data;
dev_info(&pdev->dev, "hardware revision: %d @ 0x%x\n",
rev, res->start);
/* The number of physical channels on this HW */
if (plat_data->num_of_phy_chans)
num_phy_chans = plat_data->num_of_phy_chans;
else
num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4;
dev_info(&pdev->dev, "hardware revision: %d @ 0x%x with %d physical channels\n",
rev, res->start, num_phy_chans);
if (rev < 2) {
d40_err(&pdev->dev, "hardware revision: %d is not supported",
@ -3019,8 +3026,6 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
goto failure;
}
plat_data = pdev->dev.platform_data;
/* Count the number of logical channels in use */
for (i = 0; i < plat_data->dev_len; i++)
if (plat_data->dev_rx[i] != 0)

4
include/linux/platform_data/dma-ste-dma40.h
View File

@ -147,6 +147,9 @@ struct stedma40_chan_cfg {
* @memcpy_conf_log: default configuration of logical channel memcpy
* @disabled_channels: A vector, ending with -1, that marks physical channels
* that are for different reasons not available for the driver.
* @num_of_phy_chans: The number of physical channels implemented in HW.
* 0 means reading the number of channels from DMA HW but this is only valid
* for 'multiple of 4' channels, like 8.
*/
struct stedma40_platform_data {
u32 dev_len;
@ -158,6 +161,7 @@ struct stedma40_platform_data {
struct stedma40_chan_cfg *memcpy_conf_log;
int disabled_channels[STEDMA40_MAX_PHYS];
bool use_esram_lcla;
int num_of_phy_chans;
};
#ifdef CONFIG_STE_DMA40