diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c index b13d8adf3be4..20d30f6265cd 100644 --- a/arch/mips/alchemy/common/prom.c +++ b/arch/mips/alchemy/common/prom.c @@ -40,6 +40,7 @@ #include #include +#include int prom_argc; char **prom_argv; diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c index 2388d68786f4..a7a6d31a7a41 100644 --- a/arch/mips/alchemy/common/setup.c +++ b/arch/mips/alchemy/common/setup.c @@ -30,13 +30,11 @@ #include #include /* for dma_default_coherent */ +#include #include #include -extern void __init board_setup(void); -extern void __init alchemy_set_lpj(void); - static bool alchemy_dma_coherent(void) { switch (alchemy_get_cputype()) { diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 01aff80a5967..99f321b6e417 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -702,7 +702,7 @@ static struct ssb_sprom bcm63xx_sprom = { .boardflags_hi = 0x0000, }; -int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) +static int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) { if (bus->bustype == SSB_BUSTYPE_PCI) { memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom)); diff --git a/arch/mips/bcm63xx/dev-rng.c b/arch/mips/bcm63xx/dev-rng.c index d277b4dc6c68..f94151f7c96f 100644 --- a/arch/mips/bcm63xx/dev-rng.c +++ b/arch/mips/bcm63xx/dev-rng.c @@ -26,7 +26,7 @@ static struct platform_device bcm63xx_rng_device = { .resource = rng_resources, }; -int __init bcm63xx_rng_register(void) +static int __init bcm63xx_rng_register(void) { if (!BCMCPU_IS_6368()) return -ENODEV; diff --git a/arch/mips/bcm63xx/dev-uart.c b/arch/mips/bcm63xx/dev-uart.c index 3bc7f3bfc9ad..5d6bf0445b29 100644 --- a/arch/mips/bcm63xx/dev-uart.c +++ b/arch/mips/bcm63xx/dev-uart.c @@ -10,6 +10,7 @@ #include #include #include +#include static struct resource uart0_resources[] = { { diff --git a/arch/mips/bcm63xx/dev-wdt.c b/arch/mips/bcm63xx/dev-wdt.c index 42130914a3c2..302bf7ed5ad5 100644 --- a/arch/mips/bcm63xx/dev-wdt.c +++ b/arch/mips/bcm63xx/dev-wdt.c @@ -34,7 +34,7 @@ static struct platform_device bcm63xx_wdt_device = { }, }; -int __init bcm63xx_wdt_register(void) +static int __init bcm63xx_wdt_register(void) { wdt_resources[0].start = bcm63xx_regset_address(RSET_WDT); wdt_resources[0].end = wdt_resources[0].start; diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c index 2548013442f6..6240a8f88ea3 100644 --- a/arch/mips/bcm63xx/irq.c +++ b/arch/mips/bcm63xx/irq.c @@ -72,7 +72,7 @@ static inline int enable_irq_for_cpu(int cpu, struct irq_data *d, */ #define BUILD_IPIC_INTERNAL(width) \ -void __dispatch_internal_##width(int cpu) \ +static void __dispatch_internal_##width(int cpu) \ { \ u32 pending[width / 32]; \ unsigned int src, tgt; \ diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c index d811e3e03f81..c13ddb544a23 100644 --- a/arch/mips/bcm63xx/setup.c +++ b/arch/mips/bcm63xx/setup.c @@ -159,7 +159,7 @@ void __init plat_mem_setup(void) board_setup(); } -int __init bcm63xx_register_devices(void) +static int __init bcm63xx_register_devices(void) { /* register gpiochip */ bcm63xx_gpio_init(); diff --git a/arch/mips/bcm63xx/timer.c b/arch/mips/bcm63xx/timer.c index a86065854c0c..74b83807df30 100644 --- a/arch/mips/bcm63xx/timer.c +++ b/arch/mips/bcm63xx/timer.c @@ -178,7 +178,7 @@ int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us) EXPORT_SYMBOL(bcm63xx_timer_set); -int bcm63xx_timer_init(void) +static int bcm63xx_timer_init(void) { int ret, irq; u32 reg; diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c index 2e099d55a564..9a266bf78339 100644 --- a/arch/mips/cobalt/setup.c +++ b/arch/mips/cobalt/setup.c @@ -23,9 +23,6 @@ #include -extern void cobalt_machine_restart(char *command); -extern void cobalt_machine_halt(void); - const char *get_system_type(void) { switch (cobalt_board_id) { diff --git a/arch/mips/fw/arc/memory.c b/arch/mips/fw/arc/memory.c index 66188739f54d..fb78e6fd5de4 100644 --- a/arch/mips/fw/arc/memory.c +++ b/arch/mips/fw/arc/memory.c @@ -37,7 +37,7 @@ static unsigned int nr_prom_mem __initdata; */ #define ARC_PAGE_SHIFT 12 -struct linux_mdesc * __init ArcGetMemoryDescriptor(struct linux_mdesc *Current) +static struct linux_mdesc * __init ArcGetMemoryDescriptor(struct linux_mdesc *Current) { return (struct linux_mdesc *) ARC_CALL1(get_mdesc, Current); } diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index a7eec3364a64..41546777902b 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -597,6 +597,9 @@ #include +void alchemy_set_lpj(void); +void board_setup(void); + /* helpers to access the SYS_* registers */ static inline unsigned long alchemy_rdsys(int regofs) { diff --git a/arch/mips/include/asm/mach-cobalt/cobalt.h b/arch/mips/include/asm/mach-cobalt/cobalt.h index 5b9fce73f11d..97f9d5e9446d 100644 --- a/arch/mips/include/asm/mach-cobalt/cobalt.h +++ b/arch/mips/include/asm/mach-cobalt/cobalt.h @@ -19,4 +19,7 @@ extern int cobalt_board_id; #define COBALT_BRD_ID_QUBE2 0x5 #define COBALT_BRD_ID_RAQ2 0x6 +void cobalt_machine_halt(void); +void cobalt_machine_restart(char *command); + #endif /* __ASM_COBALT_H */ diff --git a/arch/mips/kernel/elf.c b/arch/mips/kernel/elf.c index 5582a4ca1e9e..7aa2c2360ff6 100644 --- a/arch/mips/kernel/elf.c +++ b/arch/mips/kernel/elf.c @@ -11,6 +11,7 @@ #include #include +#include #ifdef CONFIG_MIPS_FP_SUPPORT @@ -309,6 +310,11 @@ void mips_set_personality_nan(struct arch_elf_state *state) struct cpuinfo_mips *c = &boot_cpu_data; struct task_struct *t = current; + /* Do this early so t->thread.fpu.fcr31 won't be clobbered in case + * we are preempted before the lose_fpu(0) in start_thread. + */ + lose_fpu(0); + t->thread.fpu.fcr31 = c->fpu_csr31; switch (state->nan_2008) { case 0: diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index dec6878b35f6..a1c1cb5de913 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -2007,7 +2007,13 @@ unsigned long vi_handlers[64]; void reserve_exception_space(phys_addr_t addr, unsigned long size) { - memblock_reserve(addr, size); + /* + * reserve exception space on CPUs other than CPU0 + * is too late, since memblock is unavailable when APs + * up + */ + if (smp_processor_id() == 0) + memblock_reserve(addr, size); } void __init *set_except_vector(int n, void *addr) diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c index a3cf29365858..0c45767eacf6 100644 --- a/arch/mips/lantiq/prom.c +++ b/arch/mips/lantiq/prom.c @@ -108,10 +108,9 @@ void __init prom_init(void) prom_init_cmdline(); #if defined(CONFIG_MIPS_MT_SMP) - if (cpu_has_mipsmt) { - lantiq_smp_ops = vsmp_smp_ops; + lantiq_smp_ops = vsmp_smp_ops; + if (cpu_has_mipsmt) lantiq_smp_ops.init_secondary = lantiq_init_secondary; - register_smp_ops(&lantiq_smp_ops); - } + register_smp_ops(&lantiq_smp_ops); #endif } diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c index f25caa6aa9d3..553142c1f14f 100644 --- a/arch/mips/loongson64/init.c +++ b/arch/mips/loongson64/init.c @@ -103,6 +103,9 @@ void __init szmem(unsigned int node) if (loongson_sysconf.vgabios_addr) memblock_reserve(virt_to_phys((void *)loongson_sysconf.vgabios_addr), SZ_256K); + /* set nid for reserved memory */ + memblock_set_node((u64)node << 44, (u64)(node + 1) << 44, + &memblock.reserved, node); } #ifndef CONFIG_NUMA diff --git a/arch/mips/loongson64/numa.c b/arch/mips/loongson64/numa.c index 8f61e93c0c5b..68dafd6d3e25 100644 --- a/arch/mips/loongson64/numa.c +++ b/arch/mips/loongson64/numa.c @@ -132,6 +132,8 @@ static void __init node_mem_init(unsigned int node) /* Reserve pfn range 0~node[0]->node_start_pfn */ memblock_reserve(0, PAGE_SIZE * start_pfn); + /* set nid for reserved memory on node 0 */ + memblock_set_node(0, 1ULL << 44, &memblock.reserved, 0); } } diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile index 27c14ede191e..9877fcc512b1 100644 --- a/arch/mips/sgi-ip27/Makefile +++ b/arch/mips/sgi-ip27/Makefile @@ -5,7 +5,7 @@ obj-y := ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o \ ip27-klnuma.o ip27-memory.o ip27-nmi.o ip27-reset.o ip27-timer.o \ - ip27-hubio.o ip27-xtalk.o + ip27-xtalk.o obj-$(CONFIG_EARLY_PRINTK) += ip27-console.o obj-$(CONFIG_SMP) += ip27-smp.o diff --git a/arch/mips/sgi-ip27/ip27-berr.c b/arch/mips/sgi-ip27/ip27-berr.c index 923a63a51cda..9eb497cb5d52 100644 --- a/arch/mips/sgi-ip27/ip27-berr.c +++ b/arch/mips/sgi-ip27/ip27-berr.c @@ -22,6 +22,8 @@ #include #include +#include "ip27-common.h" + static void dump_hub_information(unsigned long errst0, unsigned long errst1) { static char *err_type[2][8] = { @@ -57,7 +59,7 @@ static void dump_hub_information(unsigned long errst0, unsigned long errst1) [st0.pi_stat0_fmt.s0_err_type] ? : "invalid"); } -int ip27_be_handler(struct pt_regs *regs, int is_fixup) +static int ip27_be_handler(struct pt_regs *regs, int is_fixup) { unsigned long errst0, errst1; int data = regs->cp0_cause & 4; diff --git a/arch/mips/sgi-ip27/ip27-common.h b/arch/mips/sgi-ip27/ip27-common.h index ed008a08464c..a0059fa13934 100644 --- a/arch/mips/sgi-ip27/ip27-common.h +++ b/arch/mips/sgi-ip27/ip27-common.h @@ -10,6 +10,7 @@ extern void hub_rt_clock_event_init(void); extern void hub_rtc_init(nasid_t nasid); extern void install_cpu_nmi_handler(int slice); extern void install_ipi(void); +extern void ip27_be_init(void); extern void ip27_reboot_setup(void); extern const struct plat_smp_ops ip27_smp_ops; extern unsigned long node_getfirstfree(nasid_t nasid); @@ -17,4 +18,5 @@ extern void per_cpu_init(void); extern void replicate_kernel_text(void); extern void setup_replication_mask(void); + #endif /* __IP27_COMMON_H */ diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c deleted file mode 100644 index c57f0d8f3218..000000000000 --- a/arch/mips/sgi-ip27/ip27-hubio.c +++ /dev/null @@ -1,185 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 1992-1997, 2000-2003 Silicon Graphics, Inc. - * Copyright (C) 2004 Christoph Hellwig. - * - * Support functions for the HUB ASIC - mostly PIO mapping related. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - - -static int force_fire_and_forget = 1; - -/** - * hub_pio_map - establish a HUB PIO mapping - * - * @nasid: nasid to perform PIO mapping on - * @widget: widget ID to perform PIO mapping for - * @xtalk_addr: xtalk_address that needs to be mapped - * @size: size of the PIO mapping - * - **/ -unsigned long hub_pio_map(nasid_t nasid, xwidgetnum_t widget, - unsigned long xtalk_addr, size_t size) -{ - unsigned i; - - /* use small-window mapping if possible */ - if ((xtalk_addr % SWIN_SIZE) + size <= SWIN_SIZE) - return NODE_SWIN_BASE(nasid, widget) + (xtalk_addr % SWIN_SIZE); - - if ((xtalk_addr % BWIN_SIZE) + size > BWIN_SIZE) { - printk(KERN_WARNING "PIO mapping at hub %d widget %d addr 0x%lx" - " too big (%ld)\n", - nasid, widget, xtalk_addr, size); - return 0; - } - - xtalk_addr &= ~(BWIN_SIZE-1); - for (i = 0; i < HUB_NUM_BIG_WINDOW; i++) { - if (test_and_set_bit(i, hub_data(nasid)->h_bigwin_used)) - continue; - - /* - * The code below does a PIO write to setup an ITTE entry. - * - * We need to prevent other CPUs from seeing our updated - * memory shadow of the ITTE (in the piomap) until the ITTE - * entry is actually set up; otherwise, another CPU might - * attempt a PIO prematurely. - * - * Also, the only way we can know that an entry has been - * received by the hub and can be used by future PIO reads/ - * writes is by reading back the ITTE entry after writing it. - * - * For these two reasons, we PIO read back the ITTE entry - * after we write it. - */ - IIO_ITTE_PUT(nasid, i, HUB_PIO_MAP_TO_MEM, widget, xtalk_addr); - __raw_readq(IIO_ITTE_GET(nasid, i)); - - return NODE_BWIN_BASE(nasid, widget) + (xtalk_addr % BWIN_SIZE); - } - - printk(KERN_WARNING "unable to establish PIO mapping for at" - " hub %d widget %d addr 0x%lx\n", - nasid, widget, xtalk_addr); - return 0; -} - - -/* - * hub_setup_prb(nasid, prbnum, credits, conveyor) - * - * Put a PRB into fire-and-forget mode if conveyor isn't set. Otherwise, - * put it into conveyor belt mode with the specified number of credits. - */ -static void hub_setup_prb(nasid_t nasid, int prbnum, int credits) -{ - union iprb_u prb; - int prb_offset; - - /* - * Get the current register value. - */ - prb_offset = IIO_IOPRB(prbnum); - prb.iprb_regval = REMOTE_HUB_L(nasid, prb_offset); - - /* - * Clear out some fields. - */ - prb.iprb_ovflow = 1; - prb.iprb_bnakctr = 0; - prb.iprb_anakctr = 0; - - /* - * Enable or disable fire-and-forget mode. - */ - prb.iprb_ff = force_fire_and_forget ? 1 : 0; - - /* - * Set the appropriate number of PIO credits for the widget. - */ - prb.iprb_xtalkctr = credits; - - /* - * Store the new value to the register. - */ - REMOTE_HUB_S(nasid, prb_offset, prb.iprb_regval); -} - -/** - * hub_set_piomode - set pio mode for a given hub - * - * @nasid: physical node ID for the hub in question - * - * Put the hub into either "PIO conveyor belt" mode or "fire-and-forget" mode. - * To do this, we have to make absolutely sure that no PIOs are in progress - * so we turn off access to all widgets for the duration of the function. - * - * XXX - This code should really check what kind of widget we're talking - * to. Bridges can only handle three requests, but XG will do more. - * How many can crossbow handle to widget 0? We're assuming 1. - * - * XXX - There is a bug in the crossbow that link reset PIOs do not - * return write responses. The easiest solution to this problem is to - * leave widget 0 (xbow) in fire-and-forget mode at all times. This - * only affects pio's to xbow registers, which should be rare. - **/ -static void hub_set_piomode(nasid_t nasid) -{ - u64 ii_iowa; - union hubii_wcr_u ii_wcr; - unsigned i; - - ii_iowa = REMOTE_HUB_L(nasid, IIO_OUTWIDGET_ACCESS); - REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, 0); - - ii_wcr.wcr_reg_value = REMOTE_HUB_L(nasid, IIO_WCR); - - if (ii_wcr.iwcr_dir_con) { - /* - * Assume a bridge here. - */ - hub_setup_prb(nasid, 0, 3); - } else { - /* - * Assume a crossbow here. - */ - hub_setup_prb(nasid, 0, 1); - } - - /* - * XXX - Here's where we should take the widget type into - * when account assigning credits. - */ - for (i = HUB_WIDGET_ID_MIN; i <= HUB_WIDGET_ID_MAX; i++) - hub_setup_prb(nasid, i, 3); - - REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, ii_iowa); -} - -/* - * hub_pio_init - PIO-related hub initialization - * - * @hub: hubinfo structure for our hub - */ -void hub_pio_init(nasid_t nasid) -{ - unsigned i; - - /* initialize big window piomaps for this hub */ - bitmap_zero(hub_data(nasid)->h_bigwin_used, HUB_NUM_BIG_WINDOW); - for (i = 0; i < HUB_NUM_BIG_WINDOW; i++) - IIO_ITTE_DISABLE(nasid, i); - - hub_set_piomode(nasid); -} diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index a0dd3bd2b81b..8f5299b269e7 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -23,6 +23,8 @@ #include #include +#include "ip27-common.h" + struct hub_irq_data { u64 *irq_mask[2]; cpuid_t cpu; diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index f79c48393716..b8ca94cfb4fe 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c index 84889b57d5ff..fc2816398d0c 100644 --- a/arch/mips/sgi-ip27/ip27-nmi.c +++ b/arch/mips/sgi-ip27/ip27-nmi.c @@ -11,6 +11,8 @@ #include #include +#include "ip27-common.h" + #if 0 #define NODE_NUM_CPUS(n) CNODE_NUM_CPUS(n) #else @@ -23,16 +25,7 @@ typedef unsigned long machreg_t; static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED; - -/* - * Let's see what else we need to do here. Set up sp, gp? - */ -void nmi_dump(void) -{ - void cont_nmi_dump(void); - - cont_nmi_dump(); -} +static void nmi_dump(void); void install_cpu_nmi_handler(int slice) { @@ -53,7 +46,7 @@ void install_cpu_nmi_handler(int slice) * into the eframe format for the node under consideration. */ -void nmi_cpu_eframe_save(nasid_t nasid, int slice) +static void nmi_cpu_eframe_save(nasid_t nasid, int slice) { struct reg_struct *nr; int i; @@ -129,7 +122,7 @@ void nmi_cpu_eframe_save(nasid_t nasid, int slice) pr_emerg("\n"); } -void nmi_dump_hub_irq(nasid_t nasid, int slice) +static void nmi_dump_hub_irq(nasid_t nasid, int slice) { u64 mask0, mask1, pend0, pend1; @@ -153,7 +146,7 @@ void nmi_dump_hub_irq(nasid_t nasid, int slice) * Copy the cpu registers which have been saved in the IP27prom format * into the eframe format for the node under consideration. */ -void nmi_node_eframe_save(nasid_t nasid) +static void nmi_node_eframe_save(nasid_t nasid) { int slice; @@ -170,8 +163,7 @@ void nmi_node_eframe_save(nasid_t nasid) /* * Save the nmi cpu registers for all cpus in the system. */ -void -nmi_eframes_save(void) +static void nmi_eframes_save(void) { nasid_t nasid; @@ -179,8 +171,7 @@ nmi_eframes_save(void) nmi_node_eframe_save(nasid); } -void -cont_nmi_dump(void) +static void nmi_dump(void) { #ifndef REAL_NMI_SIGNAL static atomic_t nmied_cpus = ATOMIC_INIT(0); diff --git a/arch/mips/sgi-ip30/ip30-console.c b/arch/mips/sgi-ip30/ip30-console.c index b91f8c4fdc78..7c6dcf6e73f7 100644 --- a/arch/mips/sgi-ip30/ip30-console.c +++ b/arch/mips/sgi-ip30/ip30-console.c @@ -3,6 +3,7 @@ #include #include +#include static inline struct ioc3_uartregs *console_uart(void) { diff --git a/arch/mips/sgi-ip30/ip30-setup.c b/arch/mips/sgi-ip30/ip30-setup.c index 75a34684e704..e8547636a748 100644 --- a/arch/mips/sgi-ip30/ip30-setup.c +++ b/arch/mips/sgi-ip30/ip30-setup.c @@ -14,6 +14,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/sgi-ip32/crime.c b/arch/mips/sgi-ip32/crime.c index a8e0c776ca6c..b8a0e4cfa9ce 100644 --- a/arch/mips/sgi-ip32/crime.c +++ b/arch/mips/sgi-ip32/crime.c @@ -18,6 +18,8 @@ #include #include +#include "ip32-common.h" + struct sgi_crime __iomem *crime; struct sgi_mace __iomem *mace; @@ -39,7 +41,7 @@ void __init crime_init(void) id, rev, field, (unsigned long) CRIME_BASE); } -irqreturn_t crime_memerr_intr(unsigned int irq, void *dev_id) +irqreturn_t crime_memerr_intr(int irq, void *dev_id) { unsigned long stat, addr; int fatal = 0; @@ -90,7 +92,7 @@ irqreturn_t crime_memerr_intr(unsigned int irq, void *dev_id) return IRQ_HANDLED; } -irqreturn_t crime_cpuerr_intr(unsigned int irq, void *dev_id) +irqreturn_t crime_cpuerr_intr(int irq, void *dev_id) { unsigned long stat = crime->cpu_error_stat & CRIME_CPU_ERROR_MASK; unsigned long addr = crime->cpu_error_addr & CRIME_CPU_ERROR_ADDR_MASK; diff --git a/arch/mips/sgi-ip32/ip32-berr.c b/arch/mips/sgi-ip32/ip32-berr.c index 478b63b4c808..7cbc27941f92 100644 --- a/arch/mips/sgi-ip32/ip32-berr.c +++ b/arch/mips/sgi-ip32/ip32-berr.c @@ -18,6 +18,8 @@ #include #include +#include "ip32-common.h" + static int ip32_be_handler(struct pt_regs *regs, int is_fixup) { int data = regs->cp0_cause & 4; diff --git a/arch/mips/sgi-ip32/ip32-common.h b/arch/mips/sgi-ip32/ip32-common.h new file mode 100644 index 000000000000..cfc0225b1419 --- /dev/null +++ b/arch/mips/sgi-ip32/ip32-common.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __IP32_COMMON_H +#define __IP32_COMMON_H + +#include +#include + +void __init crime_init(void); +irqreturn_t crime_memerr_intr(int irq, void *dev_id); +irqreturn_t crime_cpuerr_intr(int irq, void *dev_id); +void __init ip32_be_init(void); +void ip32_prepare_poweroff(void); + +#endif /* __IP32_COMMON_H */ diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index e21ea1de05e3..29d04468a06b 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -28,6 +28,8 @@ #include #include +#include "ip32-common.h" + /* issue a PIO read to make sure no PIO writes are pending */ static inline void flush_crime_bus(void) { @@ -107,10 +109,6 @@ static inline void flush_mace_bus(void) * is quite different anyway. */ -/* Some initial interrupts to set up */ -extern irqreturn_t crime_memerr_intr(int irq, void *dev_id); -extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id); - /* * This is for pure CRIME interrupts - ie not MACE. The advantage? * We get to split the register in half and do faster lookups. diff --git a/arch/mips/sgi-ip32/ip32-memory.c b/arch/mips/sgi-ip32/ip32-memory.c index 3fc8d0a0bdfa..5fee33744f67 100644 --- a/arch/mips/sgi-ip32/ip32-memory.c +++ b/arch/mips/sgi-ip32/ip32-memory.c @@ -15,6 +15,7 @@ #include #include #include +#include extern void crime_init(void); diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c index 18d1c115cd53..6bdc1421cda4 100644 --- a/arch/mips/sgi-ip32/ip32-reset.c +++ b/arch/mips/sgi-ip32/ip32-reset.c @@ -29,6 +29,8 @@ #include #include +#include "ip32-common.h" + #define POWERDOWN_TIMEOUT 120 /* * Blink frequency during reboot grace period and when panicked. diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c index 8019dae1721a..aeb0805aae57 100644 --- a/arch/mips/sgi-ip32/ip32-setup.c +++ b/arch/mips/sgi-ip32/ip32-setup.c @@ -26,8 +26,7 @@ #include #include -extern void ip32_be_init(void); -extern void crime_init(void); +#include "ip32-common.h" #ifdef CONFIG_SGI_O2MACE_ETH /*