regulator: qcom: Add labibb driver
Qualcomm platforms have LAB(LCD AMOLED Boost)/IBB(Inverting Buck Boost) regulators, labibb for short, which are used as power supply for LCD Mode displays. This patch adds labibb regulator driver for pmi8998 PMIC, found on SDM845 platforms. [sumits: reworked the driver design as per upstream review] Signed-off-by: Nisha Kumari <nishakumari@codeaurora.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://lore.kernel.org/r/20200622124110.20971-5-sumit.semwal@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Nisha Kumari
Mark Brown
parent
f7d7ad42a9
commit
498ab2fdf8
@ -1223,5 +1223,15 @@ config REGULATOR_WM8994
|
||||
This driver provides support for the voltage regulators on the
|
||||
WM8994 CODEC.
|
||||
|
||||
config REGULATOR_QCOM_LABIBB
|
||||
tristate "QCOM LAB/IBB regulator support"
|
||||
depends on SPMI || COMPILE_TEST
|
||||
help
|
||||
This driver supports Qualcomm's LAB/IBB regulators present on the
|
||||
Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI
|
||||
based PMIC implementations. LAB can be used as positive
|
||||
boost regulator and IBB can be used as a negative boost regulator
|
||||
for LCD display panel.
|
||||
|
||||
endif
|
||||
|
||||
|
||||
@ -90,6 +90,7 @@ obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
|
||||
|
||||
175
drivers/regulator/qcom-labibb-regulator.c
Normal file
175
drivers/regulator/qcom-labibb-regulator.c
Normal file
@ -0,0 +1,175 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
// Copyright (c) 2020, The Linux Foundation. All rights reserved.
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_irq.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
|
||||
#define REG_PERPH_TYPE 0x04
|
||||
|
||||
#define QCOM_LAB_TYPE 0x24
|
||||
#define QCOM_IBB_TYPE 0x20
|
||||
|
||||
#define PMI8998_LAB_REG_BASE 0xde00
|
||||
#define PMI8998_IBB_REG_BASE 0xdc00
|
||||
|
||||
#define REG_LABIBB_STATUS1 0x08
|
||||
#define REG_LABIBB_ENABLE_CTL 0x46
|
||||
#define LABIBB_STATUS1_VREG_OK_BIT BIT(7)
|
||||
#define LABIBB_CONTROL_ENABLE BIT(7)
|
||||
|
||||
#define LAB_ENABLE_CTL_MASK BIT(7)
|
||||
#define IBB_ENABLE_CTL_MASK (BIT(7) | BIT(6))
|
||||
|
||||
#define LABIBB_OFF_ON_DELAY 1000
|
||||
#define LAB_ENABLE_TIME (LABIBB_OFF_ON_DELAY * 2)
|
||||
#define IBB_ENABLE_TIME (LABIBB_OFF_ON_DELAY * 10)
|
||||
#define LABIBB_POLL_ENABLED_TIME 1000
|
||||
|
||||
struct labibb_regulator {
|
||||
struct regulator_desc desc;
|
||||
struct device *dev;
|
||||
struct regmap *regmap;
|
||||
struct regulator_dev *rdev;
|
||||
u16 base;
|
||||
u8 type;
|
||||
};
|
||||
|
||||
struct labibb_regulator_data {
|
||||
const char *name;
|
||||
u8 type;
|
||||
u16 base;
|
||||
struct regulator_desc *desc;
|
||||
};
|
||||
|
||||
static struct regulator_ops qcom_labibb_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
};
|
||||
|
||||
static struct regulator_desc pmi8998_lab_desc = {
|
||||
.enable_mask = LAB_ENABLE_CTL_MASK,
|
||||
.enable_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_ENABLE_CTL),
|
||||
.enable_val = LABIBB_CONTROL_ENABLE,
|
||||
.enable_time = LAB_ENABLE_TIME,
|
||||
.poll_enabled_time = LABIBB_POLL_ENABLED_TIME,
|
||||
.off_on_delay = LABIBB_OFF_ON_DELAY,
|
||||
.owner = THIS_MODULE,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.ops = &qcom_labibb_ops,
|
||||
};
|
||||
|
||||
static struct regulator_desc pmi8998_ibb_desc = {
|
||||
.enable_mask = IBB_ENABLE_CTL_MASK,
|
||||
.enable_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_ENABLE_CTL),
|
||||
.enable_val = LABIBB_CONTROL_ENABLE,
|
||||
.enable_time = IBB_ENABLE_TIME,
|
||||
.poll_enabled_time = LABIBB_POLL_ENABLED_TIME,
|
||||
.off_on_delay = LABIBB_OFF_ON_DELAY,
|
||||
.owner = THIS_MODULE,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.ops = &qcom_labibb_ops,
|
||||
};
|
||||
|
||||
static const struct labibb_regulator_data pmi8998_labibb_data[] = {
|
||||
{"lab", QCOM_LAB_TYPE, PMI8998_LAB_REG_BASE, &pmi8998_lab_desc},
|
||||
{"ibb", QCOM_IBB_TYPE, PMI8998_IBB_REG_BASE, &pmi8998_ibb_desc},
|
||||
{ },
|
||||
};
|
||||
|
||||
static const struct of_device_id qcom_labibb_match[] = {
|
||||
{ .compatible = "qcom,pmi8998-lab-ibb", .data = &pmi8998_labibb_data},
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, qcom_labibb_match);
|
||||
|
||||
static int qcom_labibb_regulator_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct labibb_regulator *vreg;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct regulator_config cfg = {};
|
||||
|
||||
const struct of_device_id *match;
|
||||
const struct labibb_regulator_data *reg_data;
|
||||
struct regmap *reg_regmap;
|
||||
unsigned int type;
|
||||
int ret;
|
||||
|
||||
reg_regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
||||
if (!reg_regmap) {
|
||||
dev_err(&pdev->dev, "Couldn't get parent's regmap\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
match = of_match_device(qcom_labibb_match, &pdev->dev);
|
||||
if (!match)
|
||||
return -ENODEV;
|
||||
|
||||
for (reg_data = match->data; reg_data->name; reg_data++) {
|
||||
|
||||
/* Validate if the type of regulator is indeed
|
||||
* what's mentioned in DT.
|
||||
*/
|
||||
ret = regmap_read(reg_regmap, reg_data->base + REG_PERPH_TYPE,
|
||||
&type);
|
||||
if (ret < 0) {
|
||||
dev_err(dev,
|
||||
"Peripheral type read failed ret=%d\n",
|
||||
ret);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (WARN_ON((type != QCOM_LAB_TYPE) && (type != QCOM_IBB_TYPE)) ||
|
||||
WARN_ON(type != reg_data->type))
|
||||
return -EINVAL;
|
||||
|
||||
vreg = devm_kzalloc(&pdev->dev, sizeof(*vreg),
|
||||
GFP_KERNEL);
|
||||
if (!vreg)
|
||||
return -ENOMEM;
|
||||
|
||||
vreg->regmap = reg_regmap;
|
||||
vreg->dev = dev;
|
||||
vreg->base = reg_data->base;
|
||||
vreg->type = reg_data->type;
|
||||
|
||||
memcpy(&vreg->desc, reg_data->desc, sizeof(vreg->desc));
|
||||
vreg->desc.of_match = reg_data->name;
|
||||
vreg->desc.name = reg_data->name;
|
||||
|
||||
cfg.dev = vreg->dev;
|
||||
cfg.driver_data = vreg;
|
||||
cfg.regmap = vreg->regmap;
|
||||
|
||||
vreg->rdev = devm_regulator_register(vreg->dev, &vreg->desc,
|
||||
&cfg);
|
||||
|
||||
if (IS_ERR(vreg->rdev)) {
|
||||
dev_err(dev, "qcom_labibb: error registering %s : %d\n",
|
||||
reg_data->name, ret);
|
||||
return PTR_ERR(vreg->rdev);
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver qcom_labibb_regulator_driver = {
|
||||
.driver = {
|
||||
.name = "qcom-lab-ibb-regulator",
|
||||
.of_match_table = qcom_labibb_match,
|
||||
},
|
||||
.probe = qcom_labibb_regulator_probe,
|
||||
};
|
||||
module_platform_driver(qcom_labibb_regulator_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Qualcomm labibb driver");
|
||||
MODULE_AUTHOR("Nisha Kumari <nishakumari@codeaurora.org>");
|
||||
MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue
Block a user