[MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors.

Added support for RM200C machines with big endian firmware
Added support for RM200-C40 (R5000 support)
    
Signed-off-by: Florian Lohoff <flo@rfc822.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -693,8 +693,8 @@ config SIBYTE_CRHONE
 
 config SNI_RM200_PCI
 	bool "SNI RM200 PCI"
-	select ARC
+	select ARC if CPU_LITTLE_ENDIAN
-	select ARC32
+	select ARC32 if CPU_LITTLE_ENDIAN
 	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
@@ -705,10 +705,13 @@ config SNI_RM200_PCI
 	select I8253
 	select I8259
 	select ISA
+	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
 	select SYS_HAS_CPU_R4X00
+	select SYS_HAS_CPU_R5000
+	select R5000_CPU_SCACHE
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-	select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help

arch/mips/pci/ops-sni.c

@@ -47,13 +47,13 @@ static int pcimt_read(struct pci_bus *bus, unsigned int devfn, int reg,
 
 	switch (size) {
 	case 1:
-		*val = *(volatile  u8 *) (PCIMT_CONFIG_DATA + (reg & 3));
+		*val = inb(PCIMT_CONFIG_DATA + (reg & 3));
 		break;
 	case 2:
-		*val = *(volatile u16 *) (PCIMT_CONFIG_DATA + (reg & 2));
+		*val = inw(PCIMT_CONFIG_DATA + (reg & 2));
 		break;
 	case 4:
-		*val = *(volatile u32 *) PCIMT_CONFIG_DATA;
+		*val = inl(PCIMT_CONFIG_DATA);
 		break;
 	}
 
@@ -70,13 +70,13 @@ static int pcimt_write(struct pci_bus *bus, unsigned int devfn, int reg,
 
 	switch (size) {
 	case 1:
-		*(volatile  u8 *) (PCIMT_CONFIG_DATA + (reg & 3)) = val;
+		outb (val, PCIMT_CONFIG_DATA + (reg & 3));
 		break;
 	case 2:
-		*(volatile u16 *) (PCIMT_CONFIG_DATA + (reg & 2)) = val;
+		outw (val, PCIMT_CONFIG_DATA + (reg & 2));
 		break;
 	case 4:
-		*(volatile u32 *) PCIMT_CONFIG_DATA = val;
+		outl (val, PCIMT_CONFIG_DATA);
 		break;
 	}
 

arch/mips/sni/Makefile

@@ -3,5 +3,6 @@
 #
 
 obj-y	 	+= irq.o pcimt_scache.o reset.o setup.o
+obj-$(CONFIG_CPU_BIG_ENDIAN) += sniprom.o
 
 EXTRA_AFLAGS := $(CFLAGS)

arch/mips/sni/setup.c

@@ -21,8 +21,11 @@
 #include <linux/fb.h>
 #include <linux/tty.h>
 
+#ifdef CONFIG_ARC
 #include <asm/arc/types.h>
 #include <asm/sgialib.h>
+#endif
+
 #include <asm/bcache.h>
 #include <asm/bootinfo.h>
 #include <asm/io.h>
@@ -72,8 +75,7 @@ static inline void sni_pcimt_detect(void)
 
 static void __init sni_display_setup(void)
 {
-#ifdef CONFIG_VT
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) && defined(CONFIG_ARC)
-#if defined(CONFIG_VGA_CONSOLE)
 	struct screen_info *si = &screen_info;
 	DISPLAY_STATUS *di;
 
@@ -88,7 +90,6 @@ static void __init sni_display_setup(void)
 		si->orig_video_points	= 16;
 	}
 #endif
-#endif
 }
 
 static struct resource sni_io_resource = {

arch/mips/sni/sniprom.c

@@ -0,0 +1,158 @@
+/*
+ * Big Endian PROM code for SNI RM machines
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005-2006 Florian Lohoff (flo@rfc822.org)
+ * Copyright (C) 2005-2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/addrspace.h>
+#include <asm/sni.h>
+#include <asm/mipsprom.h>
+#include <asm/bootinfo.h>
+
+/* special SNI prom calls */
+/*
+ * This does not exist in all proms - SINIX compares
+ * the prom env variable "version" against "2.0008"
+ * or greater. If lesser it tries to probe interesting
+ * registers
+ */
+#define PROM_GET_MEMCONF	58
+
+#define PROM_VEC		(u64 *)CKSEG1ADDR(0x1fc00000)
+#define PROM_ENTRY(x)		(PROM_VEC + (x))
+
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG_PRINTF(x...)     prom_printf(x)
+#else
+#define DBG_PRINTF(x...)
+#endif
+
+static int *(*__prom_putchar)(int)        = (int *(*)(int))PROM_ENTRY(PROM_PUTCHAR);
+static char *(*__prom_getenv)(char *)     = (char *(*)(char *))PROM_ENTRY(PROM_GETENV);
+static void (*__prom_get_memconf)(void *) = (void (*)(void *))PROM_ENTRY(PROM_GET_MEMCONF);
+
+char *prom_getenv (char *s)
+{
+	return __prom_getenv(s);
+}
+
+void prom_printf(char *fmt, ...)
+{
+	va_list args;
+	char ppbuf[1024];
+	char *bptr;
+
+	va_start(args, fmt);
+	vsprintf(ppbuf, fmt, args);
+
+	bptr = ppbuf;
+
+	while (*bptr != 0) {
+		if (*bptr == '\n')
+			__prom_putchar('\r');
+
+		__prom_putchar(*bptr++);
+	}
+	va_end(args);
+}
+
+unsigned long prom_free_prom_memory(void)
+{
+	return 0;
+}
+
+/*
+ * /proc/cpuinfo system type
+ *
+ */
+static const char *systype = "Unknown";
+const char *get_system_type(void)
+{
+	return systype;
+}
+
+#define SNI_IDPROM_BASE                0xbff00000
+#define SNI_IDPROM_MEMSIZE             (SNI_IDPROM_BASE+0x28)  /* Memsize in 16MB quantities */
+#define SNI_IDPROM_BRDTYPE             (SNI_IDPROM_BASE+0x29)  /* Board Type */
+#define SNI_IDPROM_CPUTYPE             (SNI_IDPROM_BASE+0x30)  /* CPU Type */
+
+#define SNI_IDPROM_SIZE	0x1000
+
+#ifdef DEBUG
+static void sni_idprom_dump(void)
+{
+	int	i;
+
+	prom_printf("SNI IDProm dump (first 128byte):\n");
+	for(i=0;i<128;i++) {
+		if (i%16 == 0)
+			prom_printf("%04x ", i);
+
+		prom_printf("%02x ", *(unsigned char *) (SNI_IDPROM_BASE+i));
+
+		if (i%16 == 15)
+			prom_printf("\n");
+	}
+}
+#endif
+
+static void sni_mem_init(void )
+{
+	int i, memsize;
+	struct membank {
+	        u32		size;
+	        u32		base;
+	        u32		size2;
+	        u32		pad1;
+	        u32		pad2;
+	} memconf[8];
+
+	/* MemSIZE from prom in 16MByte chunks */
+	memsize=*((unsigned char *) SNI_IDPROM_MEMSIZE) * 16;
+
+	DBG_PRINTF("IDProm memsize: %lu MByte\n", memsize);
+
+	/* get memory bank layout from prom */
+	__prom_get_memconf(&memconf);
+
+	DBG_PRINTF("prom_get_mem_conf memory configuration:\n");
+	for(i=0;i<8 && memconf[i].size;i++) {
+		prom_printf("Bank%d: %08x @ %08x\n", i,
+			memconf[i].size, memconf[i].base);
+		add_memory_region(memconf[i].base, memconf[i].size, BOOT_MEM_RAM);
+	}
+}
+
+void __init prom_init(void)
+{
+	int argc = fw_arg0;
+	char **argv = (void *)fw_arg1;
+	unsigned int sni_brd_type = *(unsigned char *) SNI_IDPROM_BRDTYPE;
+	int i;
+
+	DBG_PRINTF("Found SNI brdtype %02x\n", sni_brd_type);
+
+#ifdef DEBUG
+	sni_idprom_dump();
+#endif
+	sni_mem_init();
+
+	/* copy prom cmdline parameters to kernel cmdline */
+	for (i = 1; i < argc; i++) {
+		strcat(arcs_cmdline, argv[i]);
+		if (i < (argc - 1))
+			strcat(arcs_cmdline, " ");
+	}
+}
+

include/asm-mips/mach-rm200/cpu-feature-overrides.h

@@ -35,10 +35,8 @@
 #define cpu_has_nofpuex		0
 #define cpu_has_64bits		1
 
-#define cpu_has_subset_pcaches	0	/* No S-cache on R5000 I think ...  */
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
-#define cpu_scache_line_size()	0	/* No S-cache on R5000 I think ...  */
 
 #define cpu_has_mips32r1	0
 #define cpu_has_mips32r2	0

include/asm-mips/sni.h

@@ -15,9 +15,6 @@
 /*
  * ASIC PCI registers for little endian configuration.
  */
-#ifndef __MIPSEL__
-#error "Fix me for big endian"
-#endif
 #define PCIMT_UCONF		0xbfff0000
 #define PCIMT_IOADTIMEOUT2	0xbfff0008
 #define PCIMT_IOMEMCONF		0xbfff0010
@@ -51,9 +48,9 @@
 #define PCIMT_PCI_CONF		0xbfff0100
 
 /*
- * Data port for the PCI bus.
+ * Data port for the PCI bus in IO space
  */
-#define PCIMT_CONFIG_DATA	0xb4000cfc
+#define PCIMT_CONFIG_DATA	0x0cfc
 
 /*
  * Board specific registers