Merge branches 'clk-counted', 'clk-imx', 'clk-amlogic', 'clk-binding' and 'clk-rockchip' into clk-next

* clk-counted:
  clk: bcm: rpi: Assign ->num before accessing ->hws
  clk: bcm: dvp: Assign ->num before accessing ->hws

* clk-imx:
  clk: imx: imx8mp: Convert to platform remove callback returning void
  clk: imx: imx8mp: Switch to RUNTIME_PM_OPS()
  clk: imx: add i.MX95 BLK CTL clk driver
  dt-bindings: clock: support i.MX95 Display Master CSR module
  dt-bindings: clock: support i.MX95 BLK CTL module
  dt-bindings: clock: add i.MX95 clock header
  clk: imx: imx8mp: Add pm_runtime support for power saving

* clk-amlogic:
  clk: meson: s4: fix module autoloading
  clk: meson: fix module license to GPL only
  clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF
  clk: meson: add vclk driver
  clk: meson: pll: print out pll name when unable to lock it
  clk: meson: s4: pll: determine maximum register in regmap config
  clk: meson: s4: peripherals: determine maximum register in regmap config
  clk: meson: a1: pll: determine maximum register in regmap config
  clk: meson: a1: peripherals: determine maximum register in regmap config

* clk-binding:
  dt-bindings: clock: fixed: Define a preferred node name

* clk-rockchip:
  clk: rockchip: rk3568: Add PLL rate for 724 MHz
  clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
  clk: rockchip: rk3588: Add reset line for HDMI Receiver
  clk: rockchip: rk3568: Add missing USB480M_PHY mux
  dt-bindings: reset: Define reset id used for HDMI Receiver
  dt-bindings: clock: rockchip: add USB480M_PHY mux

Documentation/devicetree/bindings/clock/fixed-clock.yaml

@@ -11,6 +11,15 @@ maintainers:
   - Stephen Boyd <sboyd@kernel.org>
 
 properties:
+  $nodename:
+    anyOf:
+      - description:
+          Preferred name is 'clock-<freq>' with <freq> being the output
+          frequency as defined in the 'clock-frequency' property.
+        pattern: "^clock-([0-9]+|[a-z0-9-]+)$"
+      - description: Any name allowed
+        deprecated: true
+
   compatible:
     const: fixed-clock
 

Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml

@@ -11,6 +11,15 @@ maintainers:
   - Stephen Boyd <sboyd@kernel.org>
 
 properties:
+  $nodename:
+    anyOf:
+      - description:
+          If the frequency is fixed, the preferred name is 'clock-<freq>' with
+          <freq> being the output frequency.
+        pattern: "^clock-([0-9]+|[0-9a-z-]+)$"
+      - description: Any name allowed
+        deprecated: true
+
   compatible:
     enum:
       - fixed-factor-clock

Documentation/devicetree/bindings/clock/nxp,imx95-blk-ctl.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,imx95-blk-ctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX95 Block Control
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nxp,imx95-lvds-csr
+          - nxp,imx95-display-csr
+          - nxp,imx95-camera-csr
+          - nxp,imx95-vpu-csr
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See
+      include/dt-bindings/clock/nxp,imx95-clock.h
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@4c410000 {
+      compatible = "nxp,imx95-vpu-csr", "syscon";
+      reg = <0x4c410000 0x10000>;
+      #clock-cells = <1>;
+      clocks = <&scmi_clk 114>;
+      power-domains = <&scmi_devpd 21>;
+    };
+...

Documentation/devicetree/bindings/clock/nxp,imx95-display-master-csr.yaml

@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,imx95-display-master-csr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX95 Display Master Block Control
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    items:
+      - const: nxp,imx95-display-master-csr
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See
+      include/dt-bindings/clock/nxp,imx95-clock.h
+
+  mux-controller:
+    type: object
+    $ref: /schemas/mux/reg-mux.yaml
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - mux-controller
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@4c410000 {
+      compatible = "nxp,imx95-display-master-csr", "syscon";
+      reg = <0x4c410000 0x10000>;
+      #clock-cells = <1>;
+      clocks = <&scmi_clk 62>;
+      power-domains = <&scmi_devpd 3>;
+
+      mux: mux-controller {
+        compatible = "mmio-mux";
+        #mux-control-cells = <1>;
+        mux-reg-masks = <0x4 0x00000001>; /* Pixel_link_sel */
+        idle-states = <0>;
+      };
+    };
+...

drivers/clk/bcm/clk-bcm2711-dvp.c

@@ -56,6 +56,8 @@ static int clk_dvp_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	data->num = NR_CLOCKS;
+
 	data->hws[0] = clk_hw_register_gate_parent_data(&pdev->dev,
 							"hdmi0-108MHz",
 							&clk_dvp_parent, 0,
@@ -76,7 +78,6 @@ static int clk_dvp_probe(struct platform_device *pdev)
 		goto unregister_clk0;
 	}
 
-	data->num = NR_CLOCKS;
 	ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
 				     data);
 	if (ret)

drivers/clk/bcm/clk-raspberrypi.c

@@ -371,8 +371,8 @@ static int raspberrypi_discover_clocks(struct raspberrypi_clk *rpi,
 			if (IS_ERR(hw))
 				return PTR_ERR(hw);
 
-			data->hws[clks->id] = hw;
 			data->num = clks->id + 1;
+			data->hws[clks->id] = hw;
 		}
 
 		clks++;

drivers/clk/imx/Kconfig

@@ -114,6 +114,13 @@ config CLK_IMX93
 	help
 	    Build the driver for i.MX93 CCM Clock Driver
 
+config CLK_IMX95_BLK_CTL
+	tristate "IMX95 Clock Driver for BLK CTL"
+	depends on ARCH_MXC || COMPILE_TEST
+	select MXC_CLK
+	help
+	    Build the clock driver for i.MX95 BLK CTL
+
 config CLK_IMXRT1050
 	tristate "IMXRT1050 CCM Clock Driver"
 	depends on SOC_IMXRT || COMPILE_TEST

drivers/clk/imx/Makefile

@@ -31,6 +31,7 @@ obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o clk-imx8mp-audiomix.o
 obj-$(CONFIG_CLK_IMX8MQ) += clk-imx8mq.o
 
 obj-$(CONFIG_CLK_IMX93) += clk-imx93.o
+obj-$(CONFIG_CLK_IMX95_BLK_CTL) += clk-imx95-blk-ctl.o
 
 obj-$(CONFIG_MXC_CLK_SCU) += clk-imx-scu.o clk-imx-lpcg-scu.o clk-imx-acm.o
 clk-imx-scu-$(CONFIG_CLK_IMX8QXP) += clk-scu.o clk-imx8qxp.o \

drivers/clk/imx/clk-imx8mp-audiomix.c

@@ -7,10 +7,12 @@
 
 #include <linux/clk-provider.h>
 #include <linux/device.h>
+#include <linux/io.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 
 #include <dt-bindings/clock/imx8mp-clock.h>
 
@@ -18,6 +20,7 @@
 
 #define CLKEN0			0x000
 #define CLKEN1			0x004
+#define EARC			0x200
 #define SAI1_MCLK_SEL		0x300
 #define SAI2_MCLK_SEL		0x304
 #define SAI3_MCLK_SEL		0x308
@@ -26,6 +29,11 @@
 #define SAI7_MCLK_SEL		0x314
 #define PDM_SEL			0x318
 #define SAI_PLL_GNRL_CTL	0x400
+#define SAI_PLL_FDIVL_CTL0	0x404
+#define SAI_PLL_FDIVL_CTL1	0x408
+#define SAI_PLL_SSCG_CTL	0x40C
+#define SAI_PLL_MNIT_CTL	0x410
+#define IPG_LP_CTRL		0x504
 
 #define SAIn_MCLK1_PARENT(n)						\
 static const struct clk_parent_data					\
@@ -182,26 +190,82 @@ static struct clk_imx8mp_audiomix_sel sels[] = {
 	CLK_SAIn(7)
 };
 
+static const u16 audiomix_regs[] = {
+	CLKEN0,
+	CLKEN1,
+	EARC,
+	SAI1_MCLK_SEL,
+	SAI2_MCLK_SEL,
+	SAI3_MCLK_SEL,
+	SAI5_MCLK_SEL,
+	SAI6_MCLK_SEL,
+	SAI7_MCLK_SEL,
+	PDM_SEL,
+	SAI_PLL_GNRL_CTL,
+	SAI_PLL_FDIVL_CTL0,
+	SAI_PLL_FDIVL_CTL1,
+	SAI_PLL_SSCG_CTL,
+	SAI_PLL_MNIT_CTL,
+	IPG_LP_CTRL,
+};
+
+struct clk_imx8mp_audiomix_priv {
+	void __iomem *base;
+	u32 regs_save[ARRAY_SIZE(audiomix_regs)];
+
+	/* Must be last */
+	struct clk_hw_onecell_data clk_data;
+};
+
+static void clk_imx8mp_audiomix_save_restore(struct device *dev, bool save)
+{
+	struct clk_imx8mp_audiomix_priv *priv = dev_get_drvdata(dev);
+	void __iomem *base = priv->base;
+	int i;
+
+	if (save) {
+		for (i = 0; i < ARRAY_SIZE(audiomix_regs); i++)
+			priv->regs_save[i] = readl(base + audiomix_regs[i]);
+	} else {
+		for (i = 0; i < ARRAY_SIZE(audiomix_regs); i++)
+			writel(priv->regs_save[i], base + audiomix_regs[i]);
+	}
+}
+
 static int clk_imx8mp_audiomix_probe(struct platform_device *pdev)
 {
-	struct clk_hw_onecell_data *priv;
+	struct clk_imx8mp_audiomix_priv *priv;
+	struct clk_hw_onecell_data *clk_hw_data;
 	struct device *dev = &pdev->dev;
 	void __iomem *base;
 	struct clk_hw *hw;
-	int i;
+	int i, ret;
 
 	priv = devm_kzalloc(dev,
-			    struct_size(priv, hws, IMX8MP_CLK_AUDIOMIX_END),
+			    struct_size(priv, clk_data.hws, IMX8MP_CLK_AUDIOMIX_END),
 			    GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
-	priv->num = IMX8MP_CLK_AUDIOMIX_END;
+	clk_hw_data = &priv->clk_data;
+	clk_hw_data->num = IMX8MP_CLK_AUDIOMIX_END;
 
 	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
+	priv->base = base;
+	dev_set_drvdata(dev, priv);
+
+	/*
+	 * pm_runtime_enable needs to be called before clk register.
+	 * That is to make core->rpm_enabled to be true for clock
+	 * usage.
+	 */
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
 	for (i = 0; i < ARRAY_SIZE(sels); i++) {
 		if (sels[i].num_parents == 1) {
 			hw = devm_clk_hw_register_gate_parent_data(dev,
@@ -216,10 +280,12 @@ static int clk_imx8mp_audiomix_probe(struct platform_device *pdev)
 				0, NULL, NULL);
 		}
 
-		if (IS_ERR(hw))
+		if (IS_ERR(hw)) {
-			return PTR_ERR(hw);
+			ret = PTR_ERR(hw);
+			goto err_clk_register;
+		}
 
-		priv->hws[sels[i].clkid] = hw;
+		clk_hw_data->hws[sels[i].clkid] = hw;
 	}
 
 	/* SAI PLL */
@@ -228,39 +294,84 @@ static int clk_imx8mp_audiomix_probe(struct platform_device *pdev)
 		ARRAY_SIZE(clk_imx8mp_audiomix_pll_parents),
 		CLK_SET_RATE_NO_REPARENT, base + SAI_PLL_GNRL_CTL,
 		0, 2, 0, NULL, NULL);
-	priv->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL_REF_SEL] = hw;
+	clk_hw_data->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL_REF_SEL] = hw;
 
 	hw = imx_dev_clk_hw_pll14xx(dev, "sai_pll", "sai_pll_ref_sel",
 				    base + 0x400, &imx_1443x_pll);
-	if (IS_ERR(hw))
+	if (IS_ERR(hw)) {
-		return PTR_ERR(hw);
+		ret = PTR_ERR(hw);
-	priv->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL] = hw;
+		goto err_clk_register;
+	}
+	clk_hw_data->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL] = hw;
 
 	hw = devm_clk_hw_register_mux_parent_data_table(dev,
 		"sai_pll_bypass", clk_imx8mp_audiomix_pll_bypass_sels,
 		ARRAY_SIZE(clk_imx8mp_audiomix_pll_bypass_sels),
 		CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
 		base + SAI_PLL_GNRL_CTL, 16, 1, 0, NULL, NULL);
-	if (IS_ERR(hw))
+	if (IS_ERR(hw)) {
-		return PTR_ERR(hw);
+		ret = PTR_ERR(hw);
-	priv->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL_BYPASS] = hw;
+		goto err_clk_register;
+	}
+
+	clk_hw_data->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL_BYPASS] = hw;
 
 	hw = devm_clk_hw_register_gate(dev, "sai_pll_out", "sai_pll_bypass",
 				       0, base + SAI_PLL_GNRL_CTL, 13,
 				       0, NULL);
-	if (IS_ERR(hw))
+	if (IS_ERR(hw)) {
-		return PTR_ERR(hw);
+		ret = PTR_ERR(hw);
-	priv->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL_OUT] = hw;
+		goto err_clk_register;
+	}
+	clk_hw_data->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL_OUT] = hw;
 
 	hw = devm_clk_hw_register_fixed_factor(dev, "sai_pll_out_div2",
 					       "sai_pll_out", 0, 1, 2);
-	if (IS_ERR(hw))
+	if (IS_ERR(hw)) {
-		return PTR_ERR(hw);
+		ret = PTR_ERR(hw);
+		goto err_clk_register;
+	}
 
-	return devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_onecell_get,
+	ret = devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_onecell_get,
-					   priv);
+					  clk_hw_data);
+	if (ret)
+		goto err_clk_register;
+
+	pm_runtime_put_sync(dev);
+	return 0;
+
+err_clk_register:
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+	return ret;
 }
 
+static void clk_imx8mp_audiomix_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+}
+
+static int clk_imx8mp_audiomix_runtime_suspend(struct device *dev)
+{
+	clk_imx8mp_audiomix_save_restore(dev, true);
+
+	return 0;
+}
+
+static int clk_imx8mp_audiomix_runtime_resume(struct device *dev)
+{
+	clk_imx8mp_audiomix_save_restore(dev, false);
+
+	return 0;
+}
+
+static const struct dev_pm_ops clk_imx8mp_audiomix_pm_ops = {
+	RUNTIME_PM_OPS(clk_imx8mp_audiomix_runtime_suspend,
+		       clk_imx8mp_audiomix_runtime_resume, NULL)
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				      pm_runtime_force_resume)
+};
+
 static const struct of_device_id clk_imx8mp_audiomix_of_match[] = {
 	{ .compatible = "fsl,imx8mp-audio-blk-ctrl" },
 	{ /* sentinel */ }
@@ -269,9 +380,11 @@ MODULE_DEVICE_TABLE(of, clk_imx8mp_audiomix_of_match);
 
 static struct platform_driver clk_imx8mp_audiomix_driver = {
 	.probe	= clk_imx8mp_audiomix_probe,
+	.remove_new = clk_imx8mp_audiomix_remove,
 	.driver = {
 		.name = "imx8mp-audio-blk-ctrl",
 		.of_match_table = clk_imx8mp_audiomix_of_match,
+		.pm = pm_ptr(&clk_imx8mp_audiomix_pm_ops),
 	},
 };
 

drivers/clk/imx/clk-imx95-blk-ctl.c

@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <dt-bindings/clock/nxp,imx95-clock.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/pm_runtime.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+enum {
+	CLK_GATE,
+	CLK_DIVIDER,
+	CLK_MUX,
+};
+
+struct imx95_blk_ctl {
+	struct device *dev;
+	spinlock_t lock;
+	struct clk *clk_apb;
+
+	void __iomem *base;
+	/* clock gate register */
+	u32 clk_reg_restore;
+};
+
+struct imx95_blk_ctl_clk_dev_data {
+	const char *name;
+	const char * const *parent_names;
+	u32 num_parents;
+	u32 reg;
+	u32 bit_idx;
+	u32 bit_width;
+	u32 clk_type;
+	u32 flags;
+	u32 flags2;
+	u32 type;
+};
+
+struct imx95_blk_ctl_dev_data {
+	const struct imx95_blk_ctl_clk_dev_data *clk_dev_data;
+	u32 num_clks;
+	bool rpm_enabled;
+	u32 clk_reg_offset;
+};
+
+static const struct imx95_blk_ctl_clk_dev_data vpublk_clk_dev_data[] = {
+	[IMX95_CLK_VPUBLK_WAVE] = {
+		.name = "vpublk_wave_vpu",
+		.parent_names = (const char *[]){ "vpu", },
+		.num_parents = 1,
+		.reg = 8,
+		.bit_idx = 0,
+		.type = CLK_GATE,
+		.flags = CLK_SET_RATE_PARENT,
+		.flags2 = CLK_GATE_SET_TO_DISABLE,
+	},
+	[IMX95_CLK_VPUBLK_JPEG_ENC] = {
+		.name = "vpublk_jpeg_enc",
+		.parent_names = (const char *[]){ "vpujpeg", },
+		.num_parents = 1,
+		.reg = 8,
+		.bit_idx = 1,
+		.type = CLK_GATE,
+		.flags = CLK_SET_RATE_PARENT,
+		.flags2 = CLK_GATE_SET_TO_DISABLE,
+	},
+	[IMX95_CLK_VPUBLK_JPEG_DEC] = {
+		.name = "vpublk_jpeg_dec",
+		.parent_names = (const char *[]){ "vpujpeg", },
+		.num_parents = 1,
+		.reg = 8,
+		.bit_idx = 2,
+		.type = CLK_GATE,
+		.flags = CLK_SET_RATE_PARENT,
+		.flags2 = CLK_GATE_SET_TO_DISABLE,
+	}
+};
+
+static const struct imx95_blk_ctl_dev_data vpublk_dev_data = {
+	.num_clks = ARRAY_SIZE(vpublk_clk_dev_data),
+	.clk_dev_data = vpublk_clk_dev_data,
+	.rpm_enabled = true,
+	.clk_reg_offset = 8,
+};
+
+static const struct imx95_blk_ctl_clk_dev_data camblk_clk_dev_data[] = {
+	[IMX95_CLK_CAMBLK_CSI2_FOR0] = {
+		.name = "camblk_csi2_for0",
+		.parent_names = (const char *[]){ "camisi", },
+		.num_parents = 1,
+		.reg = 0,
+		.bit_idx = 0,
+		.type = CLK_GATE,
+		.flags = CLK_SET_RATE_PARENT,
+		.flags2 = CLK_GATE_SET_TO_DISABLE,
+	},
+	[IMX95_CLK_CAMBLK_CSI2_FOR1] = {
+		.name = "camblk_csi2_for1",
+		.parent_names = (const char *[]){ "camisi", },
+		.num_parents = 1,
+		.reg = 0,
+		.bit_idx = 1,
+		.type = CLK_GATE,
+		.flags = CLK_SET_RATE_PARENT,
+		.flags2 = CLK_GATE_SET_TO_DISABLE,
+	},
+	[IMX95_CLK_CAMBLK_ISP_AXI] = {
+		.name = "camblk_isp_axi",
+		.parent_names = (const char *[]){ "camaxi", },
+		.num_parents = 1,
+		.reg = 0,
+		.bit_idx = 4,
+		.type = CLK_GATE,
+		.flags = CLK_SET_RATE_PARENT,
+		.flags2 = CLK_GATE_SET_TO_DISABLE,
+	},
+	[IMX95_CLK_CAMBLK_ISP_PIXEL] = {
+		.name = "camblk_isp_pixel",
+		.parent_names = (const char *[]){ "camisi", },
+		.num_parents = 1,
+		.reg = 0,
+		.bit_idx = 5,
+		.type = CLK_GATE,
+		.flags = CLK_SET_RATE_PARENT,
+		.flags2 = CLK_GATE_SET_TO_DISABLE,
+	},
+	[IMX95_CLK_CAMBLK_ISP] = {
+		.name = "camblk_isp",
+		.parent_names = (const char *[]){ "camisi", },
+		.num_parents = 1,
+		.reg = 0,
+		.bit_idx = 6,
+		.type = CLK_GATE,
+		.flags = CLK_SET_RATE_PARENT,
+		.flags2 = CLK_GATE_SET_TO_DISABLE,
+	}
+};
+
+static const struct imx95_blk_ctl_dev_data camblk_dev_data = {
+	.num_clks = ARRAY_SIZE(camblk_clk_dev_data),
+	.clk_dev_data = camblk_clk_dev_data,
+	.clk_reg_offset = 0,
+};
+
+static const struct imx95_blk_ctl_clk_dev_data lvds_clk_dev_data[] = {
+	[IMX95_CLK_DISPMIX_LVDS_PHY_DIV] = {
+		.name = "ldb_phy_div",
+		.parent_names = (const char *[]){ "ldbpll", },
+		.num_parents = 1,
+		.reg = 0,
+		.bit_idx = 0,
+		.bit_width = 1,
+		.type = CLK_DIVIDER,
+		.flags2 = CLK_DIVIDER_POWER_OF_TWO,
+	},
+	[IMX95_CLK_DISPMIX_LVDS_CH0_GATE] = {
+		.name = "lvds_ch0_gate",
+		.parent_names = (const char *[]){ "ldb_phy_div", },
+		.num_parents = 1,
+		.reg = 0,
+		.bit_idx = 1,
+		.bit_width = 1,
+		.type = CLK_GATE,
+		.flags = CLK_SET_RATE_PARENT,
+		.flags2 = CLK_GATE_SET_TO_DISABLE,
+	},
+	[IMX95_CLK_DISPMIX_LVDS_CH1_GATE] = {
+		.name = "lvds_ch1_gate",
+		.parent_names = (const char *[]){ "ldb_phy_div", },
+		.num_parents = 1,
+		.reg = 0,
+		.bit_idx = 2,
+		.bit_width = 1,
+		.type = CLK_GATE,
+		.flags = CLK_SET_RATE_PARENT,
+		.flags2 = CLK_GATE_SET_TO_DISABLE,
+	},
+	[IMX95_CLK_DISPMIX_PIX_DI0_GATE] = {
+		.name = "lvds_di0_gate",
+		.parent_names = (const char *[]){ "ldb_pll_div7", },
+		.num_parents = 1,
+		.reg = 0,
+		.bit_idx = 3,
+		.bit_width = 1,
+		.type = CLK_GATE,
+		.flags = CLK_SET_RATE_PARENT,
+		.flags2 = CLK_GATE_SET_TO_DISABLE,
+	},
+	[IMX95_CLK_DISPMIX_PIX_DI1_GATE] = {
+		.name = "lvds_di1_gate",
+		.parent_names = (const char *[]){ "ldb_pll_div7", },
+		.num_parents = 1,
+		.reg = 0,
+		.bit_idx = 4,
+		.bit_width = 1,
+		.type = CLK_GATE,
+		.flags = CLK_SET_RATE_PARENT,
+		.flags2 = CLK_GATE_SET_TO_DISABLE,
+	},
+};
+
+static const struct imx95_blk_ctl_dev_data lvds_csr_dev_data = {
+	.num_clks = ARRAY_SIZE(lvds_clk_dev_data),
+	.clk_dev_data = lvds_clk_dev_data,
+	.clk_reg_offset = 0,
+};
+
+static const struct imx95_blk_ctl_clk_dev_data dispmix_csr_clk_dev_data[] = {
+	[IMX95_CLK_DISPMIX_ENG0_SEL] = {
+		.name = "disp_engine0_sel",
+		.parent_names = (const char *[]){"videopll1", "dsi_pll", "ldb_pll_div7", },
+		.num_parents = 4,
+		.reg = 0,
+		.bit_idx = 0,
+		.bit_width = 2,
+		.type = CLK_MUX,
+		.flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+	},
+	[IMX95_CLK_DISPMIX_ENG1_SEL] = {
+		.name = "disp_engine1_sel",
+		.parent_names = (const char *[]){"videopll1", "dsi_pll", "ldb_pll_div7", },
+		.num_parents = 4,
+		.reg = 0,
+		.bit_idx = 2,
+		.bit_width = 2,
+		.type = CLK_MUX,
+		.flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+	}
+};
+
+static const struct imx95_blk_ctl_dev_data dispmix_csr_dev_data = {
+	.num_clks = ARRAY_SIZE(dispmix_csr_clk_dev_data),
+	.clk_dev_data = dispmix_csr_clk_dev_data,
+	.clk_reg_offset = 0,
+};
+
+static int imx95_bc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct imx95_blk_ctl_dev_data *bc_data;
+	struct imx95_blk_ctl *bc;
+	struct clk_hw_onecell_data *clk_hw_data;
+	struct clk_hw **hws;
+	void __iomem *base;
+	int i, ret;
+
+	bc = devm_kzalloc(dev, sizeof(*bc), GFP_KERNEL);
+	if (!bc)
+		return -ENOMEM;
+	bc->dev = dev;
+	dev_set_drvdata(&pdev->dev, bc);
+
+	spin_lock_init(&bc->lock);
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	bc->base = base;
+	bc->clk_apb = devm_clk_get(dev, NULL);
+	if (IS_ERR(bc->clk_apb))
+		return dev_err_probe(dev, PTR_ERR(bc->clk_apb), "failed to get APB clock\n");
+
+	ret = clk_prepare_enable(bc->clk_apb);
+	if (ret) {
+		dev_err(dev, "failed to enable apb clock: %d\n", ret);
+		return ret;
+	}
+
+	bc_data = of_device_get_match_data(dev);
+	if (!bc_data)
+		return devm_of_platform_populate(dev);
+
+	clk_hw_data = devm_kzalloc(dev, struct_size(clk_hw_data, hws, bc_data->num_clks),
+				   GFP_KERNEL);
+	if (!clk_hw_data)
+		return -ENOMEM;
+
+	if (bc_data->rpm_enabled)
+		pm_runtime_enable(&pdev->dev);
+
+	clk_hw_data->num = bc_data->num_clks;
+	hws = clk_hw_data->hws;
+
+	for (i = 0; i < bc_data->num_clks; i++) {
+		const struct imx95_blk_ctl_clk_dev_data *data = &bc_data->clk_dev_data[i];
+		void __iomem *reg = base + data->reg;
+
+		if (data->type == CLK_MUX) {
+			hws[i] = clk_hw_register_mux(dev, data->name, data->parent_names,
+						     data->num_parents, data->flags, reg,
+						     data->bit_idx, data->bit_width,
+						     data->flags2, &bc->lock);
+		} else if (data->type == CLK_DIVIDER) {
+			hws[i] = clk_hw_register_divider(dev, data->name, data->parent_names[0],
+							 data->flags, reg, data->bit_idx,
+							 data->bit_width, data->flags2, &bc->lock);
+		} else {
+			hws[i] = clk_hw_register_gate(dev, data->name, data->parent_names[0],
+						      data->flags, reg, data->bit_idx,
+						      data->flags2, &bc->lock);
+		}
+		if (IS_ERR(hws[i])) {
+			ret = PTR_ERR(hws[i]);
+			dev_err(dev, "failed to register: %s:%d\n", data->name, ret);
+			goto cleanup;
+		}
+	}
+
+	ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, clk_hw_data);
+	if (ret)
+		goto cleanup;
+
+	ret = devm_of_platform_populate(dev);
+	if (ret) {
+		of_clk_del_provider(dev->of_node);
+		goto cleanup;
+	}
+
+	if (pm_runtime_enabled(bc->dev))
+		clk_disable_unprepare(bc->clk_apb);
+
+	return 0;
+
+cleanup:
+	for (i = 0; i < bc_data->num_clks; i++) {
+		if (IS_ERR_OR_NULL(hws[i]))
+			continue;
+		clk_hw_unregister(hws[i]);
+	}
+
+	if (bc_data->rpm_enabled)
+		pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static int imx95_bc_runtime_suspend(struct device *dev)
+{
+	struct imx95_blk_ctl *bc = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(bc->clk_apb);
+	return 0;
+}
+
+static int imx95_bc_runtime_resume(struct device *dev)
+{
+	struct imx95_blk_ctl *bc = dev_get_drvdata(dev);
+
+	return clk_prepare_enable(bc->clk_apb);
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int imx95_bc_suspend(struct device *dev)
+{
+	struct imx95_blk_ctl *bc = dev_get_drvdata(dev);
+	const struct imx95_blk_ctl_dev_data *bc_data;
+	int ret;
+
+	bc_data = of_device_get_match_data(dev);
+	if (!bc_data)
+		return 0;
+
+	if (bc_data->rpm_enabled) {
+		ret = pm_runtime_get_sync(bc->dev);
+		if (ret < 0) {
+			pm_runtime_put_noidle(bc->dev);
+			return ret;
+		}
+	}
+
+	bc->clk_reg_restore = readl(bc->base + bc_data->clk_reg_offset);
+
+	return 0;
+}
+
+static int imx95_bc_resume(struct device *dev)
+{
+	struct imx95_blk_ctl *bc = dev_get_drvdata(dev);
+	const struct imx95_blk_ctl_dev_data *bc_data;
+
+	bc_data = of_device_get_match_data(dev);
+	if (!bc_data)
+		return 0;
+
+	writel(bc->clk_reg_restore, bc->base + bc_data->clk_reg_offset);
+
+	if (bc_data->rpm_enabled)
+		pm_runtime_put(bc->dev);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops imx95_bc_pm_ops = {
+	SET_RUNTIME_PM_OPS(imx95_bc_runtime_suspend, imx95_bc_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(imx95_bc_suspend, imx95_bc_resume)
+};
+
+static const struct of_device_id imx95_bc_of_match[] = {
+	{ .compatible = "nxp,imx95-camera-csr", .data = &camblk_dev_data },
+	{ .compatible = "nxp,imx95-display-master-csr", },
+	{ .compatible = "nxp,imx95-lvds-csr", .data = &lvds_csr_dev_data },
+	{ .compatible = "nxp,imx95-display-csr", .data = &dispmix_csr_dev_data },
+	{ .compatible = "nxp,imx95-vpu-csr", .data = &vpublk_dev_data },
+	{ /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx95_bc_of_match);
+
+static struct platform_driver imx95_bc_driver = {
+	.probe = imx95_bc_probe,
+	.driver = {
+		.name = "imx95-blk-ctl",
+		.of_match_table = imx95_bc_of_match,
+		.pm = &imx95_bc_pm_ops,
+	},
+};
+module_platform_driver(imx95_bc_driver);
+
+MODULE_DESCRIPTION("NXP i.MX95 blk ctl driver");
+MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>");
+MODULE_LICENSE("GPL");

drivers/clk/meson/Kconfig

@@ -30,6 +30,10 @@ config COMMON_CLK_MESON_VID_PLL_DIV
 	tristate
 	select COMMON_CLK_MESON_REGMAP
 
+config COMMON_CLK_MESON_VCLK
+	tristate
+	select COMMON_CLK_MESON_REGMAP
+
 config COMMON_CLK_MESON_CLKC_UTILS
 	tristate
 
@@ -140,6 +144,7 @@ config COMMON_CLK_G12A
 	select COMMON_CLK_MESON_EE_CLKC
 	select COMMON_CLK_MESON_CPU_DYNDIV
 	select COMMON_CLK_MESON_VID_PLL_DIV
+	select COMMON_CLK_MESON_VCLK
 	select MFD_SYSCON
 	help
 	  Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2

drivers/clk/meson/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PLL) += clk-pll.o
 obj-$(CONFIG_COMMON_CLK_MESON_REGMAP) += clk-regmap.o
 obj-$(CONFIG_COMMON_CLK_MESON_SCLK_DIV) += sclk-div.o
 obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
+obj-$(CONFIG_COMMON_CLK_MESON_VCLK) += vclk.o
 
 # Amlogic Clock controllers
 

drivers/clk/meson/a1-peripherals.c

@@ -2187,6 +2187,7 @@ static struct regmap_config a1_periphs_regmap_cfg = {
 	.reg_bits   = 32,
 	.val_bits   = 32,
 	.reg_stride = 4,
+	.max_register = DMC_CLK_CTRL,
 };
 
 static struct meson_clk_hw_data a1_periphs_clks = {

drivers/clk/meson/a1-pll.c

@@ -299,6 +299,7 @@ static struct regmap_config a1_pll_regmap_cfg = {
 	.reg_bits   = 32,
 	.val_bits   = 32,
 	.reg_stride = 4,
+	.max_register = ANACTRL_HIFIPLL_STS,
 };
 
 static struct meson_clk_hw_data a1_pll_clks = {

drivers/clk/meson/axg-aoclk.c

@@ -340,4 +340,4 @@ static struct platform_driver axg_aoclkc_driver = {
 };
 
 module_platform_driver(axg_aoclkc_driver);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/axg-audio.c

@@ -1877,4 +1877,4 @@ module_platform_driver(axg_audio_driver);
 
 MODULE_DESCRIPTION("Amlogic AXG/G12A/SM1 Audio Clock driver");
 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/axg.c

@@ -2185,4 +2185,4 @@ static struct platform_driver axg_driver = {
 };
 
 module_platform_driver(axg_driver);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/clk-cpu-dyndiv.c

@@ -69,4 +69,4 @@ EXPORT_SYMBOL_GPL(meson_clk_cpu_dyndiv_ops);
 
 MODULE_DESCRIPTION("Amlogic CPU Dynamic Clock divider");
 MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/clk-dualdiv.c

@@ -140,4 +140,4 @@ EXPORT_SYMBOL_GPL(meson_clk_dualdiv_ro_ops);
 MODULE_DESCRIPTION("Amlogic dual divider driver");
 MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/clk-mpll.c

@@ -177,4 +177,4 @@ EXPORT_SYMBOL_GPL(meson_clk_mpll_ops);
 
 MODULE_DESCRIPTION("Amlogic MPLL driver");
 MODULE_AUTHOR("Michael Turquette <mturquette@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/clk-phase.c

@@ -183,4 +183,4 @@ EXPORT_SYMBOL_GPL(meson_sclk_ws_inv_ops);
 
 MODULE_DESCRIPTION("Amlogic phase driver");
 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/clk-pll.c

@@ -436,8 +436,8 @@ static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	ret = meson_clk_pll_enable(hw);
 	if (ret) {
-		pr_warn("%s: pll did not lock, trying to restore old rate %lu\n",
+		pr_warn("%s: pll %s didn't lock, trying to set old rate %lu\n",
-			__func__, old_rate);
+			__func__, clk_hw_get_name(hw), old_rate);
 		/*
 		 * FIXME: Do we really need/want this HACK ?
 		 * It looks unsafe. what happens if the clock gets into a
@@ -486,4 +486,4 @@ EXPORT_SYMBOL_GPL(meson_clk_pll_ro_ops);
 MODULE_DESCRIPTION("Amlogic PLL driver");
 MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/clk-regmap.c

@@ -183,4 +183,4 @@ EXPORT_SYMBOL_GPL(clk_regmap_mux_ro_ops);
 
 MODULE_DESCRIPTION("Amlogic regmap backed clock driver");
 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/g12a-aoclk.c

@@ -475,4 +475,4 @@ static struct platform_driver g12a_aoclkc_driver = {
 };
 
 module_platform_driver(g12a_aoclkc_driver);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/g12a.c

@@ -22,6 +22,7 @@
 #include "clk-regmap.h"
 #include "clk-cpu-dyndiv.h"
 #include "vid-pll-div.h"
+#include "vclk.h"
 #include "meson-eeclk.h"
 #include "g12a.h"
 
@@ -3165,7 +3166,7 @@ static struct clk_regmap g12a_vclk2_sel = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_hws = g12a_vclk_parent_hws,
 		.num_parents = ARRAY_SIZE(g12a_vclk_parent_hws),
-		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+		.flags = CLK_SET_RATE_NO_REPARENT,
 	},
 };
 
@@ -3193,7 +3194,6 @@ static struct clk_regmap g12a_vclk2_input = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_sel.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
 	},
 };
 
@@ -3215,19 +3215,32 @@ static struct clk_regmap g12a_vclk_div = {
 };
 
 static struct clk_regmap g12a_vclk2_div = {
-	.data = &(struct clk_regmap_div_data){
+	.data = &(struct meson_vclk_div_data){
-		.offset = HHI_VIID_CLK_DIV,
+		.div = {
+			.reg_off = HHI_VIID_CLK_DIV,
 			.shift   = 0,
 			.width   = 8,
 		},
+		.enable = {
+			.reg_off = HHI_VIID_CLK_DIV,
+			.shift   = 16,
+			.width   = 1,
+		},
+		.reset = {
+			.reg_off = HHI_VIID_CLK_DIV,
+			.shift   = 17,
+			.width   = 1,
+		},
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	},
 	.hw.init = &(struct clk_init_data){
 		.name = "vclk2_div",
-		.ops = &clk_regmap_divider_ops,
+		.ops = &meson_vclk_div_ops,
 		.parent_hws = (const struct clk_hw *[]) {
 			&g12a_vclk2_input.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
+		.flags = CLK_SET_RATE_GATE,
 	},
 };
 
@@ -3246,16 +3259,24 @@ static struct clk_regmap g12a_vclk = {
 };
 
 static struct clk_regmap g12a_vclk2 = {
-	.data = &(struct clk_regmap_gate_data){
+	.data = &(struct meson_vclk_gate_data){
-		.offset = HHI_VIID_CLK_CNTL,
+		.enable = {
-		.bit_idx = 19,
+			.reg_off = HHI_VIID_CLK_CNTL,
+			.shift   = 19,
+			.width   = 1,
+		},
+		.reset = {
+			.reg_off = HHI_VIID_CLK_CNTL,
+			.shift   = 15,
+			.width   = 1,
+		},
 	},
 	.hw.init = &(struct clk_init_data) {
 		.name = "vclk2",
-		.ops = &clk_regmap_gate_ops,
+		.ops = &meson_vclk_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_div.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3339,7 +3360,7 @@ static struct clk_regmap g12a_vclk2_div1 = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3353,7 +3374,7 @@ static struct clk_regmap g12a_vclk2_div2_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3367,7 +3388,7 @@ static struct clk_regmap g12a_vclk2_div4_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3381,7 +3402,7 @@ static struct clk_regmap g12a_vclk2_div6_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3395,7 +3416,7 @@ static struct clk_regmap g12a_vclk2_div12_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3461,6 +3482,7 @@ static struct clk_fixed_factor g12a_vclk2_div2 = {
 			&g12a_vclk2_div2_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3474,6 +3496,7 @@ static struct clk_fixed_factor g12a_vclk2_div4 = {
 			&g12a_vclk2_div4_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3487,6 +3510,7 @@ static struct clk_fixed_factor g12a_vclk2_div6 = {
 			&g12a_vclk2_div6_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3500,6 +3524,7 @@ static struct clk_fixed_factor g12a_vclk2_div12 = {
 			&g12a_vclk2_div12_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3561,7 +3586,7 @@ static struct clk_regmap g12a_cts_encl_sel = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_hws = g12a_cts_parent_hws,
 		.num_parents = ARRAY_SIZE(g12a_cts_parent_hws),
-		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
 	},
 };
 
@@ -3717,15 +3742,26 @@ static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
 		.num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		.flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
 	},
 };
 
+/*
+ * FIXME: Force as bypass by forcing a single /1 table entry, and doensn't on boot value
+ * when setting a clock whith this node in the clock path, but doesn't garantee the divider
+ * is at /1 at boot until a rate is set.
+ */
+static const struct clk_div_table g12a_mipi_dsi_pxclk_div_table[] = {
+	{ .val = 0, .div = 1 },
+	{ /* sentinel */ },
+};
+
 static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
 	.data = &(struct clk_regmap_div_data){
 		.offset = HHI_MIPIDSI_PHY_CLK_CNTL,
 		.shift = 0,
 		.width = 7,
+		.table = g12a_mipi_dsi_pxclk_div_table,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "mipi_dsi_pxclk_div",
@@ -5578,4 +5614,4 @@ static struct platform_driver g12a_driver = {
 };
 
 module_platform_driver(g12a_driver);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/gxbb-aoclk.c

@@ -300,4 +300,4 @@ static struct platform_driver gxbb_aoclkc_driver = {
 	},
 };
 module_platform_driver(gxbb_aoclkc_driver);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/gxbb.c

@@ -3569,4 +3569,4 @@ static struct platform_driver gxbb_driver = {
 };
 
 module_platform_driver(gxbb_driver);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/meson-aoclk.c

@@ -89,4 +89,4 @@ int meson_aoclkc_probe(struct platform_device *pdev)
 	return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get, (void *)&data->hw_clks);
 }
 EXPORT_SYMBOL_GPL(meson_aoclkc_probe);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/meson-eeclk.c

@@ -58,4 +58,4 @@ int meson_eeclkc_probe(struct platform_device *pdev)
 	return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get, (void *)&data->hw_clks);
 }
 EXPORT_SYMBOL_GPL(meson_eeclkc_probe);
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/s4-peripherals.c

@@ -3751,6 +3751,7 @@ static struct regmap_config clkc_regmap_config = {
 	.reg_bits       = 32,
 	.val_bits       = 32,
 	.reg_stride     = 4,
+	.max_register   = CLKCTRL_DEMOD_CLK_CTRL,
 };
 
 static struct meson_clk_hw_data s4_periphs_clks = {
@@ -3799,6 +3800,7 @@ static const struct of_device_id clkc_match_table[] = {
 	},
 	{}
 };
+MODULE_DEVICE_TABLE(of, clkc_match_table);
 
 static struct platform_driver s4_driver = {
 	.probe		= meson_s4_periphs_probe,

drivers/clk/meson/s4-pll.c

@@ -798,6 +798,7 @@ static struct regmap_config clkc_regmap_config = {
 	.reg_bits       = 32,
 	.val_bits       = 32,
 	.reg_stride     = 4,
+	.max_register   = ANACTRL_HDMIPLL_CTRL0,
 };
 
 static struct meson_clk_hw_data s4_pll_clks = {
@@ -853,6 +854,7 @@ static const struct of_device_id clkc_match_table[] = {
 	},
 	{}
 };
+MODULE_DEVICE_TABLE(of, clkc_match_table);
 
 static struct platform_driver s4_driver = {
 	.probe		= meson_s4_pll_probe,

drivers/clk/meson/sclk-div.c

@@ -251,4 +251,4 @@ EXPORT_SYMBOL_GPL(meson_sclk_div_ops);
 
 MODULE_DESCRIPTION("Amlogic Sample divider driver");
 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/meson/vclk.c

@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+#include <linux/module.h>
+#include "vclk.h"
+
+/* The VCLK gate has a supplementary reset bit to pulse after ungating */
+
+static inline struct meson_vclk_gate_data *
+clk_get_meson_vclk_gate_data(struct clk_regmap *clk)
+{
+	return (struct meson_vclk_gate_data *)clk->data;
+}
+
+static int meson_vclk_gate_enable(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
+
+	meson_parm_write(clk->map, &vclk->enable, 1);
+
+	/* Do a reset pulse */
+	meson_parm_write(clk->map, &vclk->reset, 1);
+	meson_parm_write(clk->map, &vclk->reset, 0);
+
+	return 0;
+}
+
+static void meson_vclk_gate_disable(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
+
+	meson_parm_write(clk->map, &vclk->enable, 0);
+}
+
+static int meson_vclk_gate_is_enabled(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
+
+	return meson_parm_read(clk->map, &vclk->enable);
+}
+
+const struct clk_ops meson_vclk_gate_ops = {
+	.enable = meson_vclk_gate_enable,
+	.disable = meson_vclk_gate_disable,
+	.is_enabled = meson_vclk_gate_is_enabled,
+};
+EXPORT_SYMBOL_GPL(meson_vclk_gate_ops);
+
+/* The VCLK Divider has supplementary reset & enable bits */
+
+static inline struct meson_vclk_div_data *
+clk_get_meson_vclk_div_data(struct clk_regmap *clk)
+{
+	return (struct meson_vclk_div_data *)clk->data;
+}
+
+static unsigned long meson_vclk_div_recalc_rate(struct clk_hw *hw,
+						unsigned long prate)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+	return divider_recalc_rate(hw, prate, meson_parm_read(clk->map, &vclk->div),
+				   vclk->table, vclk->flags, vclk->div.width);
+}
+
+static int meson_vclk_div_determine_rate(struct clk_hw *hw,
+					 struct clk_rate_request *req)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+	return divider_determine_rate(hw, req, vclk->table, vclk->div.width,
+				      vclk->flags);
+}
+
+static int meson_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+	int ret;
+
+	ret = divider_get_val(rate, parent_rate, vclk->table, vclk->div.width,
+			      vclk->flags);
+	if (ret < 0)
+		return ret;
+
+	meson_parm_write(clk->map, &vclk->div, ret);
+
+	return 0;
+};
+
+static int meson_vclk_div_enable(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+	/* Unreset the divider when ungating */
+	meson_parm_write(clk->map, &vclk->reset, 0);
+	meson_parm_write(clk->map, &vclk->enable, 1);
+
+	return 0;
+}
+
+static void meson_vclk_div_disable(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+	/* Reset the divider when gating */
+	meson_parm_write(clk->map, &vclk->enable, 0);
+	meson_parm_write(clk->map, &vclk->reset, 1);
+}
+
+static int meson_vclk_div_is_enabled(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+	return meson_parm_read(clk->map, &vclk->enable);
+}
+
+const struct clk_ops meson_vclk_div_ops = {
+	.recalc_rate = meson_vclk_div_recalc_rate,
+	.determine_rate = meson_vclk_div_determine_rate,
+	.set_rate = meson_vclk_div_set_rate,
+	.enable = meson_vclk_div_enable,
+	.disable = meson_vclk_div_disable,
+	.is_enabled = meson_vclk_div_is_enabled,
+};
+EXPORT_SYMBOL_GPL(meson_vclk_div_ops);
+
+MODULE_DESCRIPTION("Amlogic vclk clock driver");
+MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>");
+MODULE_LICENSE("GPL");

drivers/clk/meson/vclk.h

@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+#ifndef __VCLK_H
+#define __VCLK_H
+
+#include "clk-regmap.h"
+#include "parm.h"
+
+/**
+ * struct meson_vclk_gate_data - vclk_gate regmap backed specific data
+ *
+ * @enable:	vclk enable field
+ * @reset:	vclk reset field
+ * @flags:	hardware-specific flags
+ *
+ * Flags:
+ * Same as clk_gate except CLK_GATE_HIWORD_MASK which is ignored
+ */
+struct meson_vclk_gate_data {
+	struct parm enable;
+	struct parm reset;
+	u8 flags;
+};
+
+extern const struct clk_ops meson_vclk_gate_ops;
+
+/**
+ * struct meson_vclk_div_data - vclk_div regmap back specific data
+ *
+ * @div:	divider field
+ * @enable:	vclk divider enable field
+ * @reset:	vclk divider reset field
+ * @table:	array of value/divider pairs, last entry should have div = 0
+ *
+ * Flags:
+ * Same as clk_divider except CLK_DIVIDER_HIWORD_MASK which is ignored
+ */
+struct meson_vclk_div_data {
+	struct parm div;
+	struct parm enable;
+	struct parm reset;
+	const struct clk_div_table *table;
+	u8 flags;
+};
+
+extern const struct clk_ops meson_vclk_div_ops;
+
+#endif /* __VCLK_H */

drivers/clk/meson/vid-pll-div.c

@@ -96,4 +96,4 @@ EXPORT_SYMBOL_GPL(meson_vid_pll_div_ro_ops);
 
 MODULE_DESCRIPTION("Amlogic video pll divider driver");
 MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

drivers/clk/rockchip/clk-mmc-phase.c

@@ -14,7 +14,6 @@
 struct rockchip_mmc_clock {
 	struct clk_hw	hw;
 	void __iomem	*reg;
-	int		id;
 	int		shift;
 	int		cached_phase;
 	struct notifier_block clk_rate_change_nb;

drivers/clk/rockchip/clk-rk3568.c

@@ -64,6 +64,7 @@ static struct rockchip_pll_rate_table rk3568_pll_rates[] = {
 	RK3036_PLL_RATE(912000000, 1, 76, 2, 1, 1, 0),
 	RK3036_PLL_RATE(816000000, 1, 68, 2, 1, 1, 0),
 	RK3036_PLL_RATE(800000000, 3, 200, 2, 1, 1, 0),
+	RK3036_PLL_RATE(724000000, 3, 181, 2, 1, 1, 0),
 	RK3036_PLL_RATE(700000000, 3, 350, 4, 1, 1, 0),
 	RK3036_PLL_RATE(696000000, 1, 116, 4, 1, 1, 0),
 	RK3036_PLL_RATE(600000000, 1, 100, 4, 1, 1, 0),
@@ -215,6 +216,7 @@ static const struct rockchip_cpuclk_reg_data rk3568_cpuclk_data = {
 
 PNAME(mux_pll_p)			= { "xin24m" };
 PNAME(mux_usb480m_p)			= { "xin24m", "usb480m_phy", "clk_rtc_32k" };
+PNAME(mux_usb480m_phy_p)		= { "clk_usbphy0_480m", "clk_usbphy1_480m"};
 PNAME(mux_armclk_p)			= { "apll", "gpll" };
 PNAME(clk_i2s0_8ch_tx_p)		= { "clk_i2s0_8ch_tx_src", "clk_i2s0_8ch_tx_frac", "i2s0_mclkin", "xin_osc0_half" };
 PNAME(clk_i2s0_8ch_rx_p)		= { "clk_i2s0_8ch_rx_src", "clk_i2s0_8ch_rx_frac", "i2s0_mclkin", "xin_osc0_half" };
@@ -485,6 +487,9 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
 	MUX(USB480M, "usb480m", mux_usb480m_p, CLK_SET_RATE_PARENT,
 			RK3568_MODE_CON0, 14, 2, MFLAGS),
 
+	MUX(USB480M_PHY, "usb480m_phy", mux_usb480m_phy_p, CLK_SET_RATE_PARENT,
+			RK3568_MISC_CON2, 15, 1, MFLAGS),
+
 	/* PD_CORE */
 	COMPOSITE(0, "sclk_core_src", apll_gpll_npll_p, CLK_IGNORE_UNUSED,
 			RK3568_CLKSEL_CON(2), 8, 2, MFLAGS, 0, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,

drivers/clk/rockchip/rst-rk3588.c

@@ -577,6 +577,7 @@ static const int rk3588_register_offset[] = {
 
 	/* SOFTRST_CON59 */
 	RK3588_CRU_RESET_OFFSET(SRST_A_HDCP1_BIU, 59, 6),
+	RK3588_CRU_RESET_OFFSET(SRST_A_HDMIRX_BIU, 59, 7),
 	RK3588_CRU_RESET_OFFSET(SRST_A_VO1_BIU, 59, 8),
 	RK3588_CRU_RESET_OFFSET(SRST_H_VOP1_BIU, 59, 9),
 	RK3588_CRU_RESET_OFFSET(SRST_H_VOP1_S_BIU, 59, 10),

include/dt-bindings/clock/nxp,imx95-clock.h

@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX95_H
+#define __DT_BINDINGS_CLOCK_IMX95_H
+
+#define IMX95_CLK_VPUBLK_WAVE			0
+#define IMX95_CLK_VPUBLK_JPEG_ENC		1
+#define IMX95_CLK_VPUBLK_JPEG_DEC		2
+
+#define IMX95_CLK_CAMBLK_CSI2_FOR0		0
+#define IMX95_CLK_CAMBLK_CSI2_FOR1		1
+#define IMX95_CLK_CAMBLK_ISP_AXI		2
+#define IMX95_CLK_CAMBLK_ISP_PIXEL		3
+#define IMX95_CLK_CAMBLK_ISP			4
+
+#define IMX95_CLK_DISPMIX_LVDS_PHY_DIV		0
+#define IMX95_CLK_DISPMIX_LVDS_CH0_GATE		1
+#define IMX95_CLK_DISPMIX_LVDS_CH1_GATE		2
+#define IMX95_CLK_DISPMIX_PIX_DI0_GATE		3
+#define IMX95_CLK_DISPMIX_PIX_DI1_GATE		4
+
+#define IMX95_CLK_DISPMIX_ENG0_SEL		0
+#define IMX95_CLK_DISPMIX_ENG1_SEL		1
+
+#endif	/* __DT_BINDINGS_CLOCK_IMX95_H */

include/dt-bindings/clock/rk3568-cru.h

@@ -78,6 +78,7 @@
 #define CPLL_333M		9
 #define ARMCLK			10
 #define USB480M			11
+#define USB480M_PHY		12
 #define ACLK_CORE_NIU2BUS	18
 #define CLK_CORE_PVTM		19
 #define CLK_CORE_PVTM_CORE	20

include/dt-bindings/reset/rockchip,rk3588-cru.h

@@ -751,4 +751,6 @@
 #define SRST_P_TRNG_CHK			658
 #define SRST_TRNG_S			659
 
+#define SRST_A_HDMIRX_BIU		660
+
 #endif