Merge commit 'origin/master' into next

This commit is contained in:
Benjamin Herrenschmidt 2009-06-18 11:16:55 +10:00
commit 4b337c5f24
1229 changed files with 141539 additions and 15499 deletions

View File

@ -106,7 +106,7 @@
number of errors are printk'ed including a full stack trace.
</para>
<para>
The statistics are available via debugfs/debug_objects/stats.
The statistics are available via /sys/kernel/debug/debug_objects/stats.
They provide information about the number of warnings and the
number of successful fixups along with information about the
usage of the internal tracking objects and the state of the

View File

@ -246,7 +246,8 @@ void print_ioacct(struct taskstats *t)
int main(int argc, char *argv[])
{
int c, rc, rep_len, aggr_len, len2, cmd_type;
int c, rc, rep_len, aggr_len, len2;
int cmd_type = TASKSTATS_CMD_ATTR_UNSPEC;
__u16 id;
__u32 mypid;

View File

@ -229,10 +229,10 @@ kernel. It is the use of atomic counters to implement reference
counting, and it works such that once the counter falls to zero it can
be guaranteed that no other entity can be accessing the object:
static void obj_list_add(struct obj *obj)
static void obj_list_add(struct obj *obj, struct list_head *head)
{
obj->active = 1;
list_add(&obj->list);
list_add(&obj->list, head);
}
static void obj_list_del(struct obj *obj)

View File

@ -117,7 +117,7 @@ Using the pktcdvd debugfs interface
To read pktcdvd device infos in human readable form, do:
# cat /debug/pktcdvd/pktcdvd[0-7]/info
# cat /sys/kernel/debug/pktcdvd/pktcdvd[0-7]/info
For a description of the debugfs interface look into the file:

View File

@ -155,7 +155,7 @@ actual frequency must be determined using the following rules:
- if relation==CPUFREQ_REL_H, try to select a new_freq lower than or equal
target_freq. ("H for highest, but no higher than")
Here again the frequency table helper might assist you - see section 3
Here again the frequency table helper might assist you - see section 2
for details.

View File

@ -119,10 +119,6 @@ want the kernel to look at the CPU usage and to make decisions on
what to do about the frequency. Typically this is set to values of
around '10000' or more. It's default value is (cmp. with users-guide.txt):
transition_latency * 1000
The lowest value you can set is:
transition_latency * 100 or it may get restricted to a value where it
makes not sense for the kernel anymore to poll that often which depends
on your HZ config variable (HZ=1000: max=20000us, HZ=250: max=5000).
Be aware that transition latency is in ns and sampling_rate is in us, so you
get the same sysfs value by default.
Sampling rate should always get adjusted considering the transition latency
@ -131,14 +127,20 @@ in the bash (as said, 1000 is default), do:
echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) \
>ondemand/sampling_rate
show_sampling_rate_(min|max): THIS INTERFACE IS DEPRECATED, DON'T USE IT.
You can use wider ranges now and the general
cpuinfo_transition_latency variable (cmp. with user-guide.txt) can be
used to obtain exactly the same info:
show_sampling_rate_min = transtition_latency * 500 / 1000
show_sampling_rate_max = transtition_latency * 500000 / 1000
(divided by 1000 is to illustrate that sampling rate is in us and
transition latency is exported ns).
show_sampling_rate_min:
The sampling rate is limited by the HW transition latency:
transition_latency * 100
Or by kernel restrictions:
If CONFIG_NO_HZ is set, the limit is 10ms fixed.
If CONFIG_NO_HZ is not set or no_hz=off boot parameter is used, the
limits depend on the CONFIG_HZ option:
HZ=1000: min=20000us (20ms)
HZ=250: min=80000us (80ms)
HZ=100: min=200000us (200ms)
The highest value of kernel and HW latency restrictions is shown and
used as the minimum sampling rate.
show_sampling_rate_max: THIS INTERFACE IS DEPRECATED, DON'T USE IT.
up_threshold: defines what the average CPU usage between the samplings
of 'sampling_rate' needs to be for the kernel to make a decision on

View File

@ -31,7 +31,6 @@ Contents:
3. How to change the CPU cpufreq policy and/or speed
3.1 Preferred interface: sysfs
3.2 Deprecated interfaces

View File

@ -162,3 +162,35 @@ device_remove_file(dev,&dev_attr_power);
The file name will be 'power' with a mode of 0644 (-rw-r--r--).
Word of warning: While the kernel allows device_create_file() and
device_remove_file() to be called on a device at any time, userspace has
strict expectations on when attributes get created. When a new device is
registered in the kernel, a uevent is generated to notify userspace (like
udev) that a new device is available. If attributes are added after the
device is registered, then userspace won't get notified and userspace will
not know about the new attributes.
This is important for device driver that need to publish additional
attributes for a device at driver probe time. If the device driver simply
calls device_create_file() on the device structure passed to it, then
userspace will never be notified of the new attributes. Instead, it should
probably use class_create() and class->dev_attrs to set up a list of
desired attributes in the modules_init function, and then in the .probe()
hook, and then use device_create() to create a new device as a child
of the probed device. The new device will generate a new uevent and
properly advertise the new attributes to userspace.
For example, if a driver wanted to add the following attributes:
struct device_attribute mydriver_attribs[] = {
__ATTR(port_count, 0444, port_count_show),
__ATTR(serial_number, 0444, serial_number_show),
NULL
};
Then in the module init function is would do:
mydriver_class = class_create(THIS_MODULE, "my_attrs");
mydriver_class.dev_attr = mydriver_attribs;
And assuming 'dev' is the struct device passed into the probe hook, the driver
probe function would do something like:
create_device(&mydriver_class, dev, chrdev, &private_data, "my_name");

View File

@ -112,7 +112,7 @@ sub tda10045 {
sub tda10046 {
my $sourcefile = "TT_PCI_2.19h_28_11_2006.zip";
my $url = "http://technotrend-online.com/download/software/219/$sourcefile";
my $url = "http://www.tt-download.com/download/updates/219/$sourcefile";
my $hash = "6a7e1e2f2644b162ff0502367553c72d";
my $outfile = "dvb-fe-tda10046.fw";
my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@ -129,8 +129,8 @@ sub tda10046 {
}
sub tda10046lifeview {
my $sourcefile = "Drv_2.11.02.zip";
my $url = "http://www.lifeview.com.tw/drivers/pci_card/FlyDVB-T/$sourcefile";
my $sourcefile = "7%5Cdrv_2.11.02.zip";
my $url = "http://www.lifeview.hk/dbimages/document/$sourcefile";
my $hash = "1ea24dee4eea8fe971686981f34fd2e0";
my $outfile = "dvb-fe-tda10046.fw";
my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@ -317,7 +317,7 @@ sub nxt2002 {
sub nxt2004 {
my $sourcefile = "AVerTVHD_MCE_A180_Drv_v1.2.2.16.zip";
my $url = "http://www.aver.com/support/Drivers/$sourcefile";
my $url = "http://www.avermedia-usa.com/support/Drivers/$sourcefile";
my $hash = "111cb885b1e009188346d72acfed024c";
my $outfile = "dvb-fe-nxt2004.fw";
my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

View File

@ -29,16 +29,16 @@ o debugfs entries
fault-inject-debugfs kernel module provides some debugfs entries for runtime
configuration of fault-injection capabilities.
- /debug/fail*/probability:
- /sys/kernel/debug/fail*/probability:
likelihood of failure injection, in percent.
Format: <percent>
Note that one-failure-per-hundred is a very high error rate
for some testcases. Consider setting probability=100 and configure
/debug/fail*/interval for such testcases.
/sys/kernel/debug/fail*/interval for such testcases.
- /debug/fail*/interval:
- /sys/kernel/debug/fail*/interval:
specifies the interval between failures, for calls to
should_fail() that pass all the other tests.
@ -46,18 +46,18 @@ configuration of fault-injection capabilities.
Note that if you enable this, by setting interval>1, you will
probably want to set probability=100.
- /debug/fail*/times:
- /sys/kernel/debug/fail*/times:
specifies how many times failures may happen at most.
A value of -1 means "no limit".
- /debug/fail*/space:
- /sys/kernel/debug/fail*/space:
specifies an initial resource "budget", decremented by "size"
on each call to should_fail(,size). Failure injection is
suppressed until "space" reaches zero.
- /debug/fail*/verbose
- /sys/kernel/debug/fail*/verbose
Format: { 0 | 1 | 2 }
specifies the verbosity of the messages when failure is
@ -65,17 +65,17 @@ configuration of fault-injection capabilities.
log line per failure; '2' will print a call trace too -- useful
to debug the problems revealed by fault injection.
- /debug/fail*/task-filter:
- /sys/kernel/debug/fail*/task-filter:
Format: { 'Y' | 'N' }
A value of 'N' disables filtering by process (default).
Any positive value limits failures to only processes indicated by
/proc/<pid>/make-it-fail==1.
- /debug/fail*/require-start:
- /debug/fail*/require-end:
- /debug/fail*/reject-start:
- /debug/fail*/reject-end:
- /sys/kernel/debug/fail*/require-start:
- /sys/kernel/debug/fail*/require-end:
- /sys/kernel/debug/fail*/reject-start:
- /sys/kernel/debug/fail*/reject-end:
specifies the range of virtual addresses tested during
stacktrace walking. Failure is injected only if some caller
@ -84,26 +84,26 @@ configuration of fault-injection capabilities.
Default required range is [0,ULONG_MAX) (whole of virtual address space).
Default rejected range is [0,0).
- /debug/fail*/stacktrace-depth:
- /sys/kernel/debug/fail*/stacktrace-depth:
specifies the maximum stacktrace depth walked during search
for a caller within [require-start,require-end) OR
[reject-start,reject-end).
- /debug/fail_page_alloc/ignore-gfp-highmem:
- /sys/kernel/debug/fail_page_alloc/ignore-gfp-highmem:
Format: { 'Y' | 'N' }
default is 'N', setting it to 'Y' won't inject failures into
highmem/user allocations.
- /debug/failslab/ignore-gfp-wait:
- /debug/fail_page_alloc/ignore-gfp-wait:
- /sys/kernel/debug/failslab/ignore-gfp-wait:
- /sys/kernel/debug/fail_page_alloc/ignore-gfp-wait:
Format: { 'Y' | 'N' }
default is 'N', setting it to 'Y' will inject failures
only into non-sleep allocations (GFP_ATOMIC allocations).
- /debug/fail_page_alloc/min-order:
- /sys/kernel/debug/fail_page_alloc/min-order:
specifies the minimum page allocation order to be injected
failures.
@ -166,13 +166,13 @@ o Inject slab allocation failures into module init/exit code
#!/bin/bash
FAILTYPE=failslab
echo Y > /debug/$FAILTYPE/task-filter
echo 10 > /debug/$FAILTYPE/probability
echo 100 > /debug/$FAILTYPE/interval
echo -1 > /debug/$FAILTYPE/times
echo 0 > /debug/$FAILTYPE/space
echo 2 > /debug/$FAILTYPE/verbose
echo 1 > /debug/$FAILTYPE/ignore-gfp-wait
echo Y > /sys/kernel/debug/$FAILTYPE/task-filter
echo 10 > /sys/kernel/debug/$FAILTYPE/probability
echo 100 > /sys/kernel/debug/$FAILTYPE/interval
echo -1 > /sys/kernel/debug/$FAILTYPE/times
echo 0 > /sys/kernel/debug/$FAILTYPE/space
echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
faulty_system()
{
@ -217,20 +217,20 @@ then
exit 1
fi
cat /sys/module/$module/sections/.text > /debug/$FAILTYPE/require-start
cat /sys/module/$module/sections/.data > /debug/$FAILTYPE/require-end
cat /sys/module/$module/sections/.text > /sys/kernel/debug/$FAILTYPE/require-start
cat /sys/module/$module/sections/.data > /sys/kernel/debug/$FAILTYPE/require-end
echo N > /debug/$FAILTYPE/task-filter
echo 10 > /debug/$FAILTYPE/probability
echo 100 > /debug/$FAILTYPE/interval
echo -1 > /debug/$FAILTYPE/times
echo 0 > /debug/$FAILTYPE/space
echo 2 > /debug/$FAILTYPE/verbose
echo 1 > /debug/$FAILTYPE/ignore-gfp-wait
echo 1 > /debug/$FAILTYPE/ignore-gfp-highmem
echo 10 > /debug/$FAILTYPE/stacktrace-depth
echo N > /sys/kernel/debug/$FAILTYPE/task-filter
echo 10 > /sys/kernel/debug/$FAILTYPE/probability
echo 100 > /sys/kernel/debug/$FAILTYPE/interval
echo -1 > /sys/kernel/debug/$FAILTYPE/times
echo 0 > /sys/kernel/debug/$FAILTYPE/space
echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-highmem
echo 10 > /sys/kernel/debug/$FAILTYPE/stacktrace-depth
trap "echo 0 > /debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT
trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT
echo "Injecting errors into the module $module... (interrupt to stop)"
sleep 1000000

View File

@ -95,7 +95,7 @@ There is no way to change the vesafb video mode and/or timings after
booting linux. If you are not happy with the 60 Hz refresh rate, you
have these options:
* configure and load the DOS-Tools for your the graphics board (if
* configure and load the DOS-Tools for the graphics board (if
available) and boot linux with loadlin.
* use a native driver (matroxfb/atyfb) instead if vesafb. If none
is available, write a new one!

View File

@ -187,7 +187,7 @@ readpages: no
write_begin: no locks the page yes
write_end: no yes, unlocks yes
perform_write: no n/a yes
bmap: yes
bmap: no
invalidatepage: no yes
releasepage: no yes
direct_IO: no

View File

@ -1003,11 +1003,13 @@ CHAPTER 3: PER-PROCESS PARAMETERS
3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score
------------------------------------------------------
This file can be used to adjust the score used to select which processes
should be killed in an out-of-memory situation. Giving it a high score will
increase the likelihood of this process being killed by the oom-killer. Valid
values are in the range -16 to +15, plus the special value -17, which disables
oom-killing altogether for this process.
This file can be used to adjust the score used to select which processes should
be killed in an out-of-memory situation. The oom_adj value is a characteristic
of the task's mm, so all threads that share an mm with pid will have the same
oom_adj value. A high value will increase the likelihood of this process being
killed by the oom-killer. Valid values are in the range -16 to +15 as
explained below and a special value of -17, which disables oom-killing
altogether for threads sharing pid's mm.
The process to be killed in an out-of-memory situation is selected among all others
based on its badness score. This value equals the original memory size of the process
@ -1021,6 +1023,9 @@ the parent's score if they do not share the same memory. Thus forking servers
are the prime candidates to be killed. Having only one 'hungry' child will make
parent less preferable than the child.
/proc/<pid>/oom_adj cannot be changed for kthreads since they are immune from
oom-killing already.
/proc/<pid>/oom_score shows process' current badness score.
The following heuristics are then applied:

View File

@ -77,7 +77,8 @@
seconds for the whole load operation.
- request_firmware_nowait() is also provided for convenience in
non-user contexts.
user contexts to request firmware asynchronously, but can't be called
in atomic contexts.
about in-kernel persistence:

View File

@ -546,6 +546,10 @@ and is between 256 and 4096 characters. It is defined in the file
console=brl,ttyS0
For now, only VisioBraille is supported.
consoleblank= [KNL] The console blank (screen saver) timeout in
seconds. Defaults to 10*60 = 10mins. A value of 0
disables the blank timer.
coredump_filter=
[KNL] Change the default value for
/proc/<pid>/coredump_filter.

773
Documentation/kmemcheck.txt Normal file
View File

@ -0,0 +1,773 @@
GETTING STARTED WITH KMEMCHECK
==============================
Vegard Nossum <vegardno@ifi.uio.no>
Contents
========
0. Introduction
1. Downloading
2. Configuring and compiling
3. How to use
3.1. Booting
3.2. Run-time enable/disable
3.3. Debugging
3.4. Annotating false positives
4. Reporting errors
5. Technical description
0. Introduction
===============
kmemcheck is a debugging feature for the Linux Kernel. More specifically, it
is a dynamic checker that detects and warns about some uses of uninitialized
memory.
Userspace programmers might be familiar with Valgrind's memcheck. The main
difference between memcheck and kmemcheck is that memcheck works for userspace
programs only, and kmemcheck works for the kernel only. The implementations
are of course vastly different. Because of this, kmemcheck is not as accurate
as memcheck, but it turns out to be good enough in practice to discover real
programmer errors that the compiler is not able to find through static
analysis.
Enabling kmemcheck on a kernel will probably slow it down to the extent that
the machine will not be usable for normal workloads such as e.g. an
interactive desktop. kmemcheck will also cause the kernel to use about twice
as much memory as normal. For this reason, kmemcheck is strictly a debugging
feature.
1. Downloading
==============
kmemcheck can only be downloaded using git. If you want to write patches
against the current code, you should use the kmemcheck development branch of
the tip tree. It is also possible to use the linux-next tree, which also
includes the latest version of kmemcheck.
Assuming that you've already cloned the linux-2.6.git repository, all you
have to do is add the -tip tree as a remote, like this:
$ git remote add tip git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git
To actually download the tree, fetch the remote:
$ git fetch tip
And to check out a new local branch with the kmemcheck code:
$ git checkout -b kmemcheck tip/kmemcheck
General instructions for the -tip tree can be found here:
http://people.redhat.com/mingo/tip.git/readme.txt
2. Configuring and compiling
============================
kmemcheck only works for the x86 (both 32- and 64-bit) platform. A number of
configuration variables must have specific settings in order for the kmemcheck
menu to even appear in "menuconfig". These are:
o CONFIG_CC_OPTIMIZE_FOR_SIZE=n
This option is located under "General setup" / "Optimize for size".
Without this, gcc will use certain optimizations that usually lead to
false positive warnings from kmemcheck. An example of this is a 16-bit
field in a struct, where gcc may load 32 bits, then discard the upper
16 bits. kmemcheck sees only the 32-bit load, and may trigger a
warning for the upper 16 bits (if they're uninitialized).
o CONFIG_SLAB=y or CONFIG_SLUB=y
This option is located under "General setup" / "Choose SLAB
allocator".
o CONFIG_FUNCTION_TRACER=n
This option is located under "Kernel hacking" / "Tracers" / "Kernel
Function Tracer"
When function tracing is compiled in, gcc emits a call to another
function at the beginning of every function. This means that when the
page fault handler is called, the ftrace framework will be called
before kmemcheck has had a chance to handle the fault. If ftrace then
modifies memory that was tracked by kmemcheck, the result is an
endless recursive page fault.
o CONFIG_DEBUG_PAGEALLOC=n
This option is located under "Kernel hacking" / "Debug page memory
allocations".
In addition, I highly recommend turning on CONFIG_DEBUG_INFO=y. This is also
located under "Kernel hacking". With this, you will be able to get line number
information from the kmemcheck warnings, which is extremely valuable in
debugging a problem. This option is not mandatory, however, because it slows
down the compilation process and produces a much bigger kernel image.
Now the kmemcheck menu should be visible (under "Kernel hacking" / "kmemcheck:
trap use of uninitialized memory"). Here follows a description of the
kmemcheck configuration variables:
o CONFIG_KMEMCHECK
This must be enabled in order to use kmemcheck at all...
o CONFIG_KMEMCHECK_[DISABLED | ENABLED | ONESHOT]_BY_DEFAULT
This option controls the status of kmemcheck at boot-time. "Enabled"
will enable kmemcheck right from the start, "disabled" will boot the
kernel as normal (but with the kmemcheck code compiled in, so it can
be enabled at run-time after the kernel has booted), and "one-shot" is
a special mode which will turn kmemcheck off automatically after
detecting the first use of uninitialized memory.
If you are using kmemcheck to actively debug a problem, then you
probably want to choose "enabled" here.
The one-shot mode is mostly useful in automated test setups because it
can prevent floods of warnings and increase the chances of the machine
surviving in case something is really wrong. In other cases, the one-
shot mode could actually be counter-productive because it would turn
itself off at the very first error -- in the case of a false positive
too -- and this would come in the way of debugging the specific
problem you were interested in.
If you would like to use your kernel as normal, but with a chance to
enable kmemcheck in case of some problem, it might be a good idea to
choose "disabled" here. When kmemcheck is disabled, most of the run-
time overhead is not incurred, and the kernel will be almost as fast
as normal.
o CONFIG_KMEMCHECK_QUEUE_SIZE
Select the maximum number of error reports to store in an internal
(fixed-size) buffer. Since errors can occur virtually anywhere and in
any context, we need a temporary storage area which is guaranteed not
to generate any other page faults when accessed. The queue will be
emptied as soon as a tasklet may be scheduled. If the queue is full,
new error reports will be lost.
The default value of 64 is probably fine. If some code produces more
than 64 errors within an irqs-off section, then the code is likely to
produce many, many more, too, and these additional reports seldom give
any more information (the first report is usually the most valuable
anyway).
This number might have to be adjusted if you are not using serial
console or similar to capture the kernel log. If you are using the
"dmesg" command to save the log, then getting a lot of kmemcheck
warnings might overflow the kernel log itself, and the earlier reports
will get lost in that way instead. Try setting this to 10 or so on
such a setup.
o CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT
Select the number of shadow bytes to save along with each entry of the
error-report queue. These bytes indicate what parts of an allocation
are initialized, uninitialized, etc. and will be displayed when an
error is detected to help the debugging of a particular problem.
The number entered here is actually the logarithm of the number of
bytes that will be saved. So if you pick for example 5 here, kmemcheck
will save 2^5 = 32 bytes.
The default value should be fine for debugging most problems. It also
fits nicely within 80 columns.
o CONFIG_KMEMCHECK_PARTIAL_OK
This option (when enabled) works around certain GCC optimizations that
produce 32-bit reads from 16-bit variables where the upper 16 bits are
thrown away afterwards.
The default value (enabled) is recommended. This may of course hide
some real errors, but disabling it would probably produce a lot of
false positives.
o CONFIG_KMEMCHECK_BITOPS_OK
This option silences warnings that would be generated for bit-field
accesses where not all the bits are initialized at the same time. This
may also hide some real bugs.
This option is probably obsolete, or it should be replaced with
the kmemcheck-/bitfield-annotations for the code in question. The
default value is therefore fine.
Now compile the kernel as usual.
3. How to use
=============
3.1. Booting
============
First some information about the command-line options. There is only one
option specific to kmemcheck, and this is called "kmemcheck". It can be used
to override the default mode as chosen by the CONFIG_KMEMCHECK_*_BY_DEFAULT
option. Its possible settings are:
o kmemcheck=0 (disabled)
o kmemcheck=1 (enabled)
o kmemcheck=2 (one-shot mode)
If SLUB debugging has been enabled in the kernel, it may take precedence over
kmemcheck in such a way that the slab caches which are under SLUB debugging
will not be tracked by kmemcheck. In order to ensure that this doesn't happen
(even though it shouldn't by default), use SLUB's boot option "slub_debug",
like this: slub_debug=-
In fact, this option may also be used for fine-grained control over SLUB vs.
kmemcheck. For example, if the command line includes "kmemcheck=1
slub_debug=,dentry", then SLUB debugging will be used only for the "dentry"
slab cache, and with kmemcheck tracking all the other caches. This is advanced
usage, however, and is not generally recommended.
3.2. Run-time enable/disable
============================
When the kernel has booted, it is possible to enable or disable kmemcheck at
run-time. WARNING: This feature is still experimental and may cause false
positive warnings to appear. Therefore, try not to use this. If you find that
it doesn't work properly (e.g. you see an unreasonable amount of warnings), I
will be happy to take bug reports.
Use the file /proc/sys/kernel/kmemcheck for this purpose, e.g.:
$ echo 0 > /proc/sys/kernel/kmemcheck # disables kmemcheck
The numbers are the same as for the kmemcheck= command-line option.
3.3. Debugging
==============
A typical report will look something like this:
WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
80000000000000000000000000000000000000000088ffff0000000000000000
i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
^
Pid: 1856, comm: ntpdate Not tainted 2.6.29-rc5 #264 945P-A
RIP: 0010:[<ffffffff8104ede8>] [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
RSP: 0018:ffff88003cdf7d98 EFLAGS: 00210002
RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
RDX: ffff88003e5d6018 RSI: ffff88003e5d6024 RDI: ffff88003cdf7e84
RBP: ffff88003cdf7db8 R08: ffff88003e5d6000 R09: 0000000000000000
R10: 0000000000000080 R11: 0000000000000000 R12: 000000000000000e
R13: ffff88003cdf7e78 R14: ffff88003d530710 R15: ffff88003d5a98c8
FS: 0000000000000000(0000) GS:ffff880001982000(0063) knlGS:00000
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: ffff88003f806ea0 CR3: 000000003c036000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
[<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
[<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
[<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
[<ffffffff8100c7b5>] int_signal+0x12/0x17
[<ffffffffffffffff>] 0xffffffffffffffff
The single most valuable information in this report is the RIP (or EIP on 32-
bit) value. This will help us pinpoint exactly which instruction that caused
the warning.
If your kernel was compiled with CONFIG_DEBUG_INFO=y, then all we have to do
is give this address to the addr2line program, like this:
$ addr2line -e vmlinux -i ffffffff8104ede8
arch/x86/include/asm/string_64.h:12
include/asm-generic/siginfo.h:287
kernel/signal.c:380
kernel/signal.c:410
The "-e vmlinux" tells addr2line which file to look in. IMPORTANT: This must
be the vmlinux of the kernel that produced the warning in the first place! If
not, the line number information will almost certainly be wrong.
The "-i" tells addr2line to also print the line numbers of inlined functions.
In this case, the flag was very important, because otherwise, it would only
have printed the first line, which is just a call to memcpy(), which could be
called from a thousand places in the kernel, and is therefore not very useful.
These inlined functions would not show up in the stack trace above, simply
because the kernel doesn't load the extra debugging information. This
technique can of course be used with ordinary kernel oopses as well.
In this case, it's the caller of memcpy() that is interesting, and it can be
found in include/asm-generic/siginfo.h, line 287:
281 static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
282 {
283 if (from->si_code < 0)
284 memcpy(to, from, sizeof(*to));
285 else
286 /* _sigchld is currently the largest know union member */
287 memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
288 }
Since this was a read (kmemcheck usually warns about reads only, though it can
warn about writes to unallocated or freed memory as well), it was probably the
"from" argument which contained some uninitialized bytes. Following the chain
of calls, we move upwards to see where "from" was allocated or initialized,
kernel/signal.c, line 380:
359 static void collect_signal(int sig, struct sigpending *list, siginfo_t *info)
360 {
...
367 list_for_each_entry(q, &list->list, list) {
368 if (q->info.si_signo == sig) {
369 if (first)
370 goto still_pending;
371 first = q;
...
377 if (first) {
378 still_pending:
379 list_del_init(&first->list);
380 copy_siginfo(info, &first->info);
381 __sigqueue_free(first);
...
392 }
393 }
Here, it is &first->info that is being passed on to copy_siginfo(). The
variable "first" was found on a list -- passed in as the second argument to
collect_signal(). We continue our journey through the stack, to figure out
where the item on "list" was allocated or initialized. We move to line 410:
395 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
396 siginfo_t *info)
397 {
...
410 collect_signal(sig, pending, info);
...
414 }
Now we need to follow the "pending" pointer, since that is being passed on to
collect_signal() as "list". At this point, we've run out of lines from the
"addr2line" output. Not to worry, we just paste the next addresses from the
kmemcheck stack dump, i.e.:
[<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
[<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
[<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
[<ffffffff8100c7b5>] int_signal+0x12/0x17
$ addr2line -e vmlinux -i ffffffff8104f04e ffffffff81050bd8 \
ffffffff8100b87d ffffffff8100c7b5
kernel/signal.c:446
kernel/signal.c:1806
arch/x86/kernel/signal.c:805
arch/x86/kernel/signal.c:871
arch/x86/kernel/entry_64.S:694
Remember that since these addresses were found on the stack and not as the
RIP value, they actually point to the _next_ instruction (they are return
addresses). This becomes obvious when we look at the code for line 446:
422 int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
423 {
...
431 signr = __dequeue_signal(&tsk->signal->shared_pending,
432 mask, info);
433 /*
434 * itimer signal ?
435 *
436 * itimers are process shared and we restart periodic
437 * itimers in the signal delivery path to prevent DoS
438 * attacks in the high resolution timer case. This is
439 * compliant with the old way of self restarting
440 * itimers, as the SIGALRM is a legacy signal and only
441 * queued once. Changing the restart behaviour to
442 * restart the timer in the signal dequeue path is
443 * reducing the timer noise on heavy loaded !highres
444 * systems too.
445 */
446 if (unlikely(signr == SIGALRM)) {
...
489 }
So instead of looking at 446, we should be looking at 431, which is the line
that executes just before 446. Here we see that what we are looking for is
&tsk->signal->shared_pending.
Our next task is now to figure out which function that puts items on this
"shared_pending" list. A crude, but efficient tool, is git grep:
$ git grep -n 'shared_pending' kernel/
...
kernel/signal.c:828: pending = group ? &t->signal->shared_pending : &t->pending;
kernel/signal.c:1339: pending = group ? &t->signal->shared_pending : &t->pending;
...
There were more results, but none of them were related to list operations,
and these were the only assignments. We inspect the line numbers more closely
and find that this is indeed where items are being added to the list:
816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
817 int group)
818 {
...
828 pending = group ? &t->signal->shared_pending : &t->pending;
...
851 q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
852 (is_si_special(info) ||
853 info->si_code >= 0)));
854 if (q) {
855 list_add_tail(&q->list, &pending->list);
...
890 }
and:
1309 int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
1310 {
....
1339 pending = group ? &t->signal->shared_pending : &t->pending;
1340 list_add_tail(&q->list, &pending->list);
....
1347 }
In the first case, the list element we are looking for, "q", is being returned
from the function __sigqueue_alloc(), which looks like an allocation function.
Let's take a look at it:
187 static struct sigqueue *__sigqueue_alloc(struct task_struct *t, gfp_t flags,
188 int override_rlimit)
189 {
190 struct sigqueue *q = NULL;
191 struct user_struct *user;
192
193 /*
194 * We won't get problems with the target's UID changing under us
195 * because changing it requires RCU be used, and if t != current, the
196 * caller must be holding the RCU readlock (by way of a spinlock) and
197 * we use RCU protection here
198 */
199 user = get_uid(__task_cred(t)->user);
200 atomic_inc(&user->sigpending);
201 if (override_rlimit ||
202 atomic_read(&user->sigpending) <=
203 t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur)
204 q = kmem_cache_alloc(sigqueue_cachep, flags);
205 if (unlikely(q == NULL)) {
206 atomic_dec(&user->sigpending);
207 free_uid(user);
208 } else {
209 INIT_LIST_HEAD(&q->list);
210 q->flags = 0;
211 q->user = user;
212 }
213
214 return q;
215 }
We see that this function initializes q->list, q->flags, and q->user. It seems
that now is the time to look at the definition of "struct sigqueue", e.g.:
14 struct sigqueue {
15 struct list_head list;
16 int flags;
17 siginfo_t info;
18 struct user_struct *user;
19 };
And, you might remember, it was a memcpy() on &first->info that caused the
warning, so this makes perfect sense. It also seems reasonable to assume that
it is the caller of __sigqueue_alloc() that has the responsibility of filling
out (initializing) this member.
But just which fields of the struct were uninitialized? Let's look at
kmemcheck's report again:
WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
80000000000000000000000000000000000000000088ffff0000000000000000
i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
^
These first two lines are the memory dump of the memory object itself, and the
shadow bytemap, respectively. The memory object itself is in this case
&first->info. Just beware that the start of this dump is NOT the start of the
object itself! The position of the caret (^) corresponds with the address of
the read (ffff88003e4a2024).
The shadow bytemap dump legend is as follows:
i - initialized
u - uninitialized
a - unallocated (memory has been allocated by the slab layer, but has not
yet been handed off to anybody)
f - freed (memory has been allocated by the slab layer, but has been freed
by the previous owner)
In order to figure out where (relative to the start of the object) the
uninitialized memory was located, we have to look at the disassembly. For
that, we'll need the RIP address again:
RIP: 0010:[<ffffffff8104ede8>] [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
$ objdump -d --no-show-raw-insn vmlinux | grep -C 8 ffffffff8104ede8:
ffffffff8104edc8: mov %r8,0x8(%r8)
ffffffff8104edcc: test %r10d,%r10d
ffffffff8104edcf: js ffffffff8104ee88 <__dequeue_signal+0x168>
ffffffff8104edd5: mov %rax,%rdx
ffffffff8104edd8: mov $0xc,%ecx
ffffffff8104eddd: mov %r13,%rdi
ffffffff8104ede0: mov $0x30,%eax
ffffffff8104ede5: mov %rdx,%rsi
ffffffff8104ede8: rep movsl %ds:(%rsi),%es:(%rdi)
ffffffff8104edea: test $0x2,%al
ffffffff8104edec: je ffffffff8104edf0 <__dequeue_signal+0xd0>
ffffffff8104edee: movsw %ds:(%rsi),%es:(%rdi)
ffffffff8104edf0: test $0x1,%al
ffffffff8104edf2: je ffffffff8104edf5 <__dequeue_signal+0xd5>
ffffffff8104edf4: movsb %ds:(%rsi),%es:(%rdi)
ffffffff8104edf5: mov %r8,%rdi
ffffffff8104edf8: callq ffffffff8104de60 <__sigqueue_free>
As expected, it's the "rep movsl" instruction from the memcpy() that causes
the warning. We know about REP MOVSL that it uses the register RCX to count
the number of remaining iterations. By taking a look at the register dump
again (from the kmemcheck report), we can figure out how many bytes were left
to copy:
RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
By looking at the disassembly, we also see that %ecx is being loaded with the
value $0xc just before (ffffffff8104edd8), so we are very lucky. Keep in mind
that this is the number of iterations, not bytes. And since this is a "long"
operation, we need to multiply by 4 to get the number of bytes. So this means
that the uninitialized value was encountered at 4 * (0xc - 0x9) = 12 bytes
from the start of the object.
We can now try to figure out which field of the "struct siginfo" that was not
initialized. This is the beginning of the struct:
40 typedef struct siginfo {
41 int si_signo;
42 int si_errno;
43 int si_code;
44
45 union {
..
92 } _sifields;
93 } siginfo_t;
On 64-bit, the int is 4 bytes long, so it must the the union member that has
not been initialized. We can verify this using gdb:
$ gdb vmlinux
...
(gdb) p &((struct siginfo *) 0)->_sifields
$1 = (union {...} *) 0x10
Actually, it seems that the union member is located at offset 0x10 -- which
means that gcc has inserted 4 bytes of padding between the members si_code
and _sifields. We can now get a fuller picture of the memory dump:
_----------------------------=> si_code
/ _--------------------=> (padding)
| / _------------=> _sifields(._kill._pid)
| | / _----=> _sifields(._kill._uid)
| | | /
-------|-------|-------|-------|
80000000000000000000000000000000000000000088ffff0000000000000000
i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
This allows us to realize another important fact: si_code contains the value
0x80. Remember that x86 is little endian, so the first 4 bytes "80000000" are
really the number 0x00000080. With a bit of research, we find that this is
actually the constant SI_KERNEL defined in include/asm-generic/siginfo.h:
144 #define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
This macro is used in exactly one place in the x86 kernel: In send_signal()
in kernel/signal.c:
816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
817 int group)
818 {
...
828 pending = group ? &t->signal->shared_pending : &t->pending;
...
851 q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
852 (is_si_special(info) ||
853 info->si_code >= 0)));
854 if (q) {
855 list_add_tail(&q->list, &pending->list);
856 switch ((unsigned long) info) {
...
865 case (unsigned long) SEND_SIG_PRIV:
866 q->info.si_signo = sig;
867 q->info.si_errno = 0;
868 q->info.si_code = SI_KERNEL;
869 q->info.si_pid = 0;
870 q->info.si_uid = 0;
871 break;
...
890 }
Not only does this match with the .si_code member, it also matches the place
we found earlier when looking for where siginfo_t objects are enqueued on the
"shared_pending" list.
So to sum up: It seems that it is the padding introduced by the compiler
between two struct fields that is uninitialized, and this gets reported when
we do a memcpy() on the struct. This means that we have identified a false
positive warning.
Normally, kmemcheck will not report uninitialized accesses in memcpy() calls
when both the source and destination addresses are tracked. (Instead, we copy
the shadow bytemap as well). In this case, the destination address clearly
was not tracked. We can dig a little deeper into the stack trace from above:
arch/x86/kernel/signal.c:805
arch/x86/kernel/signal.c:871
arch/x86/kernel/entry_64.S:694
And we clearly see that the destination siginfo object is located on the
stack:
782 static void do_signal(struct pt_regs *regs)
783 {
784 struct k_sigaction ka;
785 siginfo_t info;
...
804 signr = get_signal_to_deliver(&info, &ka, regs, NULL);
...
854 }
And this &info is what eventually gets passed to copy_siginfo() as the
destination argument.
Now, even though we didn't find an actual error here, the example is still a
good one, because it shows how one would go about to find out what the report
was all about.
3.4. Annotating false positives
===============================
There are a few different ways to make annotations in the source code that
will keep kmemcheck from checking and reporting certain allocations. Here
they are:
o __GFP_NOTRACK_FALSE_POSITIVE
This flag can be passed to kmalloc() or kmem_cache_alloc() (therefore
also to other functions that end up calling one of these) to indicate
that the allocation should not be tracked because it would lead to
a false positive report. This is a "big hammer" way of silencing
kmemcheck; after all, even if the false positive pertains to
particular field in a struct, for example, we will now lose the
ability to find (real) errors in other parts of the same struct.
Example:
/* No warnings will ever trigger on accessing any part of x */
x = kmalloc(sizeof *x, GFP_KERNEL | __GFP_NOTRACK_FALSE_POSITIVE);
o kmemcheck_bitfield_begin(name)/kmemcheck_bitfield_end(name) and
kmemcheck_annotate_bitfield(ptr, name)
The first two of these three macros can be used inside struct
definitions to signal, respectively, the beginning and end of a
bitfield. Additionally, this will assign the bitfield a name, which
is given as an argument to the macros.
Having used these markers, one can later use
kmemcheck_annotate_bitfield() at the point of allocation, to indicate
which parts of the allocation is part of a bitfield.
Example:
struct foo {
int x;
kmemcheck_bitfield_begin(flags);
int flag_a:1;
int flag_b:1;
kmemcheck_bitfield_end(flags);
int y;
};
struct foo *x = kmalloc(sizeof *x);
/* No warnings will trigger on accessing the bitfield of x */
kmemcheck_annotate_bitfield(x, flags);
Note that kmemcheck_annotate_bitfield() can be used even before the
return value of kmalloc() is checked -- in other words, passing NULL
as the first argument is legal (and will do nothing).
4. Reporting errors
===================
As we have seen, kmemcheck will produce false positive reports. Therefore, it
is not very wise to blindly post kmemcheck warnings to mailing lists and
maintainers. Instead, I encourage maintainers and developers to find errors
in their own code. If you get a warning, you can try to work around it, try
to figure out if it's a real error or not, or simply ignore it. Most
developers know their own code and will quickly and efficiently determine the
root cause of a kmemcheck report. This is therefore also the most efficient
way to work with kmemcheck.
That said, we (the kmemcheck maintainers) will always be on the lookout for
false positives that we can annotate and silence. So whatever you find,
please drop us a note privately! Kernel configs and steps to reproduce (if
available) are of course a great help too.
Happy hacking!
5. Technical description
========================
kmemcheck works by marking memory pages non-present. This means that whenever
somebody attempts to access the page, a page fault is generated. The page
fault handler notices that the page was in fact only hidden, and so it calls
on the kmemcheck code to make further investigations.
When the investigations are completed, kmemcheck "shows" the page by marking
it present (as it would be under normal circumstances). This way, the
interrupted code can continue as usual.
But after the instruction has been executed, we should hide the page again, so
that we can catch the next access too! Now kmemcheck makes use of a debugging
feature of the processor, namely single-stepping. When the processor has
finished the one instruction that generated the memory access, a debug
exception is raised. From here, we simply hide the page again and continue
execution, this time with the single-stepping feature turned off.
kmemcheck requires some assistance from the memory allocator in order to work.
The memory allocator needs to
1. Tell kmemcheck about newly allocated pages and pages that are about to
be freed. This allows kmemcheck to set up and tear down the shadow memory
for the pages in question. The shadow memory stores the status of each
byte in the allocation proper, e.g. whether it is initialized or
uninitialized.
2. Tell kmemcheck which parts of memory should be marked uninitialized.
There are actually a few more states, such as "not yet allocated" and
"recently freed".
If a slab cache is set up using the SLAB_NOTRACK flag, it will never return
memory that can take page faults because of kmemcheck.
If a slab cache is NOT set up using the SLAB_NOTRACK flag, callers can still
request memory with the __GFP_NOTRACK or __GFP_NOTRACK_FALSE_POSITIVE flags.
This does not prevent the page faults from occurring, however, but marks the
object in question as being initialized so that no warnings will ever be
produced for this object.
Currently, the SLAB and SLUB allocators are supported by kmemcheck.

View File

@ -507,9 +507,9 @@ http://www.linuxsymposium.org/2006/linuxsymposium_procv2.pdf (pages 101-115)
Appendix A: The kprobes debugfs interface
With recent kernels (> 2.6.20) the list of registered kprobes is visible
under the /debug/kprobes/ directory (assuming debugfs is mounted at /debug).
under the /sys/kernel/debug/kprobes/ directory (assuming debugfs is mounted at //sys/kernel/debug).
/debug/kprobes/list: Lists all registered probes on the system
/sys/kernel/debug/kprobes/list: Lists all registered probes on the system
c015d71a k vfs_read+0x0
c011a316 j do_fork+0x0
@ -525,7 +525,7 @@ virtual addresses that correspond to modules that've been unloaded),
such probes are marked with [GONE]. If the probe is temporarily disabled,
such probes are marked with [DISABLED].
/debug/kprobes/enabled: Turn kprobes ON/OFF forcibly.
/sys/kernel/debug/kprobes/enabled: Turn kprobes ON/OFF forcibly.
Provides a knob to globally and forcibly turn registered kprobes ON or OFF.
By default, all kprobes are enabled. By echoing "0" to this file, all

View File

@ -1,10 +1,11 @@
SCSI FC Tansport
=============================================
Date: 4/12/2007
Date: 11/18/2008
Kernel Revisions for features:
rports : <<TBS>>
vports : 2.6.22 (? TBD)
vports : 2.6.22
bsg support : 2.6.30 (?TBD?)
Introduction
@ -15,6 +16,7 @@ The FC transport can be found at:
drivers/scsi/scsi_transport_fc.c
include/scsi/scsi_transport_fc.h
include/scsi/scsi_netlink_fc.h
include/scsi/scsi_bsg_fc.h
This file is found at Documentation/scsi/scsi_fc_transport.txt
@ -472,6 +474,14 @@ int
fc_vport_terminate(struct fc_vport *vport)
FC BSG support (CT & ELS passthru, and more)
========================================================================
<< To Be Supplied >>
Credits
=======
The following people have contributed to this document:

View File

@ -1271,6 +1271,11 @@ of interest:
hostdata[0] - area reserved for LLD at end of struct Scsi_Host. Size
is set by the second argument (named 'xtr_bytes') to
scsi_host_alloc() or scsi_register().
vendor_id - a unique value that identifies the vendor supplying
the LLD for the Scsi_Host. Used most often in validating
vendor-specific message requests. Value consists of an
identifier type and a vendor-specific value.
See scsi_netlink.h for a description of valid formats.
The scsi_host structure is defined in include/scsi/scsi_host.h

View File

@ -233,8 +233,8 @@ These protections are added to score to judge whether this zone should be used
for page allocation or should be reclaimed.
In this example, if normal pages (index=2) are required to this DMA zone and
pages_high is used for watermark, the kernel judges this zone should not be
used because pages_free(1355) is smaller than watermark + protection[2]
watermark[WMARK_HIGH] is used for watermark, the kernel judges this zone should
not be used because pages_free(1355) is smaller than watermark + protection[2]
(4 + 2004 = 2008). If this protection value is 0, this zone would be used for
normal page requirement. If requirement is DMA zone(index=0), protection[0]
(=0) is used.
@ -280,9 +280,10 @@ The default value is 65536.
min_free_kbytes:
This is used to force the Linux VM to keep a minimum number
of kilobytes free. The VM uses this number to compute a pages_min
value for each lowmem zone in the system. Each lowmem zone gets
a number of reserved free pages based proportionally on its size.
of kilobytes free. The VM uses this number to compute a
watermark[WMARK_MIN] value for each lowmem zone in the system.
Each lowmem zone gets a number of reserved free pages based
proportionally on its size.
Some minimal amount of memory is needed to satisfy PF_MEMALLOC
allocations; if you set this to lower than 1024KB, your system will
@ -314,10 +315,14 @@ min_unmapped_ratio:
This is available only on NUMA kernels.
A percentage of the total pages in each zone. Zone reclaim will only
occur if more than this percentage of pages are file backed and unmapped.
This is to insure that a minimal amount of local pages is still available for
file I/O even if the node is overallocated.
This is a percentage of the total pages in each zone. Zone reclaim will
only occur if more than this percentage of pages are in a state that
zone_reclaim_mode allows to be reclaimed.
If zone_reclaim_mode has the value 4 OR'd, then the percentage is compared
against all file-backed unmapped pages including swapcache pages and tmpfs
files. Otherwise, only unmapped pages backed by normal files but not tmpfs
files and similar are considered.
The default is 1 percent.

View File

@ -7,7 +7,6 @@ Copyright 2008 Red Hat Inc.
(dual licensed under the GPL v2)
Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton,
John Kacur, and David Teigland.
Written for: 2.6.28-rc2
Introduction
@ -33,13 +32,26 @@ The File System
Ftrace uses the debugfs file system to hold the control files as
well as the files to display output.
To mount the debugfs system:
When debugfs is configured into the kernel (which selecting any ftrace
option will do) the directory /sys/kernel/debug will be created. To mount
this directory, you can add to your /etc/fstab file:
# mkdir /debug
# mount -t debugfs nodev /debug
debugfs /sys/kernel/debug debugfs defaults 0 0
( Note: it is more common to mount at /sys/kernel/debug, but for
simplicity this document will use /debug)
Or you can mount it at run time with:
mount -t debugfs nodev /sys/kernel/debug
For quicker access to that directory you may want to make a soft link to
it:
ln -s /sys/kernel/debug /debug
Any selected ftrace option will also create a directory called tracing
within the debugfs. The rest of the document will assume that you are in
the ftrace directory (cd /sys/kernel/debug/tracing) and will only concentrate
on the files within that directory and not distract from the content with
the extended "/sys/kernel/debug/tracing" path name.
That's it! (assuming that you have ftrace configured into your kernel)
@ -389,18 +401,18 @@ trace_options
The trace_options file is used to control what gets printed in
the trace output. To see what is available, simply cat the file:
cat /debug/tracing/trace_options
cat trace_options
print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \
noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj
To disable one of the options, echo in the option prepended with
"no".
echo noprint-parent > /debug/tracing/trace_options
echo noprint-parent > trace_options
To enable an option, leave off the "no".
echo sym-offset > /debug/tracing/trace_options
echo sym-offset > trace_options
Here are the available options:
@ -476,11 +488,11 @@ sched_switch
This tracer simply records schedule switches. Here is an example
of how to use it.
# echo sched_switch > /debug/tracing/current_tracer
# echo 1 > /debug/tracing/tracing_enabled
# echo sched_switch > current_tracer
# echo 1 > tracing_enabled
# sleep 1
# echo 0 > /debug/tracing/tracing_enabled
# cat /debug/tracing/trace
# echo 0 > tracing_enabled
# cat trace
# tracer: sched_switch
#
@ -583,13 +595,13 @@ new trace is saved.
To reset the maximum, echo 0 into tracing_max_latency. Here is
an example:
# echo irqsoff > /debug/tracing/current_tracer
# echo 0 > /debug/tracing/tracing_max_latency
# echo 1 > /debug/tracing/tracing_enabled
# echo irqsoff > current_tracer
# echo 0 > tracing_max_latency
# echo 1 > tracing_enabled
# ls -ltr
[...]
# echo 0 > /debug/tracing/tracing_enabled
# cat /debug/tracing/latency_trace
# echo 0 > tracing_enabled
# cat latency_trace
# tracer: irqsoff
#
irqsoff latency trace v1.1.5 on 2.6.26
@ -690,13 +702,13 @@ Like the irqsoff tracer, it records the maximum latency for
which preemption was disabled. The control of preemptoff tracer
is much like the irqsoff tracer.
# echo preemptoff > /debug/tracing/current_tracer
# echo 0 > /debug/tracing/tracing_max_latency
# echo 1 > /debug/tracing/tracing_enabled
# echo preemptoff > current_tracer
# echo 0 > tracing_max_latency
# echo 1 > tracing_enabled
# ls -ltr
[...]
# echo 0 > /debug/tracing/tracing_enabled
# cat /debug/tracing/latency_trace
# echo 0 > tracing_enabled
# cat latency_trace
# tracer: preemptoff
#
preemptoff latency trace v1.1.5 on 2.6.26-rc8
@ -837,13 +849,13 @@ tracer.
Again, using this trace is much like the irqsoff and preemptoff
tracers.
# echo preemptirqsoff > /debug/tracing/current_tracer
# echo 0 > /debug/tracing/tracing_max_latency
# echo 1 > /debug/tracing/tracing_enabled
# echo preemptirqsoff > current_tracer
# echo 0 > tracing_max_latency
# echo 1 > tracing_enabled
# ls -ltr
[...]
# echo 0 > /debug/tracing/tracing_enabled
# cat /debug/tracing/latency_trace
# echo 0 > tracing_enabled
# cat latency_trace
# tracer: preemptirqsoff
#
preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
@ -999,12 +1011,12 @@ slightly differently than we did with the previous tracers.
Instead of performing an 'ls', we will run 'sleep 1' under
'chrt' which changes the priority of the task.
# echo wakeup > /debug/tracing/current_tracer
# echo 0 > /debug/tracing/tracing_max_latency
# echo 1 > /debug/tracing/tracing_enabled
# echo wakeup > current_tracer
# echo 0 > tracing_max_latency
# echo 1 > tracing_enabled
# chrt -f 5 sleep 1
# echo 0 > /debug/tracing/tracing_enabled
# cat /debug/tracing/latency_trace
# echo 0 > tracing_enabled
# cat latency_trace
# tracer: wakeup
#
wakeup latency trace v1.1.5 on 2.6.26-rc8
@ -1114,11 +1126,11 @@ can be done from the debug file system. Make sure the
ftrace_enabled is set; otherwise this tracer is a nop.
# sysctl kernel.ftrace_enabled=1
# echo function > /debug/tracing/current_tracer
# echo 1 > /debug/tracing/tracing_enabled
# echo function > current_tracer
# echo 1 > tracing_enabled
# usleep 1
# echo 0 > /debug/tracing/tracing_enabled
# cat /debug/tracing/trace
# echo 0 > tracing_enabled
# cat trace
# tracer: function
#
# TASK-PID CPU# TIMESTAMP FUNCTION
@ -1155,7 +1167,7 @@ int trace_fd;
[...]
int main(int argc, char *argv[]) {
[...]
trace_fd = open("/debug/tracing/tracing_enabled", O_WRONLY);
trace_fd = open(tracing_file("tracing_enabled"), O_WRONLY);
[...]
if (condition_hit()) {
write(trace_fd, "0", 1);
@ -1163,26 +1175,20 @@ int main(int argc, char *argv[]) {
[...]
}
Note: Here we hard coded the path name. The debugfs mount is not
guaranteed to be at /debug (and is more commonly at
/sys/kernel/debug). For simple one time traces, the above is
sufficent. For anything else, a search through /proc/mounts may
be needed to find where the debugfs file-system is mounted.
Single thread tracing
---------------------
By writing into /debug/tracing/set_ftrace_pid you can trace a
By writing into set_ftrace_pid you can trace a
single thread. For example:
# cat /debug/tracing/set_ftrace_pid
# cat set_ftrace_pid
no pid
# echo 3111 > /debug/tracing/set_ftrace_pid
# cat /debug/tracing/set_ftrace_pid
# echo 3111 > set_ftrace_pid
# cat set_ftrace_pid
3111
# echo function > /debug/tracing/current_tracer
# cat /debug/tracing/trace | head
# echo function > current_tracer
# cat trace | head
# tracer: function
#
# TASK-PID CPU# TIMESTAMP FUNCTION
@ -1193,8 +1199,8 @@ no pid
yum-updatesd-3111 [003] 1637.254683: lock_hrtimer_base <-hrtimer_try_to_cancel
yum-updatesd-3111 [003] 1637.254685: fget_light <-do_sys_poll
yum-updatesd-3111 [003] 1637.254686: pipe_poll <-do_sys_poll
# echo -1 > /debug/tracing/set_ftrace_pid
# cat /debug/tracing/trace |head
# echo -1 > set_ftrace_pid
# cat trace |head
# tracer: function
#
# TASK-PID CPU# TIMESTAMP FUNCTION
@ -1216,6 +1222,51 @@ something like this simple program:
#include <fcntl.h>
#include <unistd.h>
#define _STR(x) #x
#define STR(x) _STR(x)
#define MAX_PATH 256
const char *find_debugfs(void)
{
static char debugfs[MAX_PATH+1];
static int debugfs_found;
char type[100];
FILE *fp;
if (debugfs_found)
return debugfs;
if ((fp = fopen("/proc/mounts","r")) == NULL) {
perror("/proc/mounts");
return NULL;
}
while (fscanf(fp, "%*s %"
STR(MAX_PATH)
"s %99s %*s %*d %*d\n",
debugfs, type) == 2) {
if (strcmp(type, "debugfs") == 0)
break;
}
fclose(fp);
if (strcmp(type, "debugfs") != 0) {
fprintf(stderr, "debugfs not mounted");
return NULL;
}
debugfs_found = 1;
return debugfs;
}
const char *tracing_file(const char *file_name)
{
static char trace_file[MAX_PATH+1];
snprintf(trace_file, MAX_PATH, "%s/%s", find_debugfs(), file_name);
return trace_file;
}
int main (int argc, char **argv)
{
if (argc < 1)
@ -1226,12 +1277,12 @@ int main (int argc, char **argv)
char line[64];
int s;
ffd = open("/debug/tracing/current_tracer", O_WRONLY);
ffd = open(tracing_file("current_tracer"), O_WRONLY);
if (ffd < 0)
exit(-1);
write(ffd, "nop", 3);
fd = open("/debug/tracing/set_ftrace_pid", O_WRONLY);
fd = open(tracing_file("set_ftrace_pid"), O_WRONLY);
s = sprintf(line, "%d\n", getpid());
write(fd, line, s);
@ -1383,22 +1434,22 @@ want, depending on your needs.
tracing_cpu_mask file) or you might sometimes see unordered
function calls while cpu tracing switch.
hide: echo nofuncgraph-cpu > /debug/tracing/trace_options
show: echo funcgraph-cpu > /debug/tracing/trace_options
hide: echo nofuncgraph-cpu > trace_options
show: echo funcgraph-cpu > trace_options
- The duration (function's time of execution) is displayed on
the closing bracket line of a function or on the same line
than the current function in case of a leaf one. It is default
enabled.
hide: echo nofuncgraph-duration > /debug/tracing/trace_options
show: echo funcgraph-duration > /debug/tracing/trace_options
hide: echo nofuncgraph-duration > trace_options
show: echo funcgraph-duration > trace_options
- The overhead field precedes the duration field in case of
reached duration thresholds.
hide: echo nofuncgraph-overhead > /debug/tracing/trace_options
show: echo funcgraph-overhead > /debug/tracing/trace_options
hide: echo nofuncgraph-overhead > trace_options
show: echo funcgraph-overhead > trace_options
depends on: funcgraph-duration
ie:
@ -1427,8 +1478,8 @@ want, depending on your needs.
- The task/pid field displays the thread cmdline and pid which
executed the function. It is default disabled.
hide: echo nofuncgraph-proc > /debug/tracing/trace_options
show: echo funcgraph-proc > /debug/tracing/trace_options
hide: echo nofuncgraph-proc > trace_options
show: echo funcgraph-proc > trace_options
ie:
@ -1451,8 +1502,8 @@ want, depending on your needs.
system clock since it started. A snapshot of this time is
given on each entry/exit of functions
hide: echo nofuncgraph-abstime > /debug/tracing/trace_options
show: echo funcgraph-abstime > /debug/tracing/trace_options
hide: echo nofuncgraph-abstime > trace_options
show: echo funcgraph-abstime > trace_options
ie:
@ -1549,7 +1600,7 @@ listed in:
available_filter_functions
# cat /debug/tracing/available_filter_functions
# cat available_filter_functions
put_prev_task_idle
kmem_cache_create
pick_next_task_rt
@ -1561,12 +1612,12 @@ mutex_lock
If I am only interested in sys_nanosleep and hrtimer_interrupt:
# echo sys_nanosleep hrtimer_interrupt \
> /debug/tracing/set_ftrace_filter
# echo ftrace > /debug/tracing/current_tracer
# echo 1 > /debug/tracing/tracing_enabled
> set_ftrace_filter
# echo ftrace > current_tracer
# echo 1 > tracing_enabled
# usleep 1
# echo 0 > /debug/tracing/tracing_enabled
# cat /debug/tracing/trace
# echo 0 > tracing_enabled
# cat trace
# tracer: ftrace
#
# TASK-PID CPU# TIMESTAMP FUNCTION
@ -1577,7 +1628,7 @@ If I am only interested in sys_nanosleep and hrtimer_interrupt:
To see which functions are being traced, you can cat the file:
# cat /debug/tracing/set_ftrace_filter
# cat set_ftrace_filter
hrtimer_interrupt
sys_nanosleep
@ -1597,7 +1648,7 @@ Note: It is better to use quotes to enclose the wild cards,
otherwise the shell may expand the parameters into names
of files in the local directory.
# echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter
# echo 'hrtimer_*' > set_ftrace_filter
Produces:
@ -1618,7 +1669,7 @@ Produces:
Notice that we lost the sys_nanosleep.
# cat /debug/tracing/set_ftrace_filter
# cat set_ftrace_filter
hrtimer_run_queues
hrtimer_run_pending
hrtimer_init
@ -1644,17 +1695,17 @@ To append to the filters, use '>>'
To clear out a filter so that all functions will be recorded
again:
# echo > /debug/tracing/set_ftrace_filter
# cat /debug/tracing/set_ftrace_filter
# echo > set_ftrace_filter
# cat set_ftrace_filter
#
Again, now we want to append.
# echo sys_nanosleep > /debug/tracing/set_ftrace_filter
# cat /debug/tracing/set_ftrace_filter
# echo sys_nanosleep > set_ftrace_filter
# cat set_ftrace_filter
sys_nanosleep
# echo 'hrtimer_*' >> /debug/tracing/set_ftrace_filter
# cat /debug/tracing/set_ftrace_filter
# echo 'hrtimer_*' >> set_ftrace_filter
# cat set_ftrace_filter
hrtimer_run_queues
hrtimer_run_pending
hrtimer_init
@ -1677,7 +1728,7 @@ hrtimer_init_sleeper
The set_ftrace_notrace prevents those functions from being
traced.
# echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace
# echo '*preempt*' '*lock*' > set_ftrace_notrace
Produces:
@ -1767,13 +1818,13 @@ the effect on the tracing is different. Every read from
trace_pipe is consumed. This means that subsequent reads will be
different. The trace is live.
# echo function > /debug/tracing/current_tracer
# cat /debug/tracing/trace_pipe > /tmp/trace.out &
# echo function > current_tracer
# cat trace_pipe > /tmp/trace.out &
[1] 4153
# echo 1 > /debug/tracing/tracing_enabled
# echo 1 > tracing_enabled
# usleep 1
# echo 0 > /debug/tracing/tracing_enabled
# cat /debug/tracing/trace
# echo 0 > tracing_enabled
# cat trace
# tracer: function
#
# TASK-PID CPU# TIMESTAMP FUNCTION
@ -1809,7 +1860,7 @@ number listed is the number of entries that can be recorded per
CPU. To know the full size, multiply the number of possible CPUS
with the number of entries.
# cat /debug/tracing/buffer_size_kb
# cat buffer_size_kb
1408 (units kilobytes)
Note, to modify this, you must have tracing completely disabled.
@ -1817,18 +1868,18 @@ To do that, echo "nop" into the current_tracer. If the
current_tracer is not set to "nop", an EINVAL error will be
returned.
# echo nop > /debug/tracing/current_tracer
# echo 10000 > /debug/tracing/buffer_size_kb
# cat /debug/tracing/buffer_size_kb
# echo nop > current_tracer
# echo 10000 > buffer_size_kb
# cat buffer_size_kb
10000 (units kilobytes)
The number of pages which will be allocated is limited to a
percentage of available memory. Allocating too much will produce
an error.
# echo 1000000000000 > /debug/tracing/buffer_size_kb
# echo 1000000000000 > buffer_size_kb
-bash: echo: write error: Cannot allocate memory
# cat /debug/tracing/buffer_size_kb
# cat buffer_size_kb
85
-----------

View File

@ -32,41 +32,41 @@ is no way to automatically detect if you are losing events due to CPUs racing.
Usage Quick Reference
---------------------
$ mount -t debugfs debugfs /debug
$ echo mmiotrace > /debug/tracing/current_tracer
$ cat /debug/tracing/trace_pipe > mydump.txt &
$ mount -t debugfs debugfs /sys/kernel/debug
$ echo mmiotrace > /sys/kernel/debug/tracing/current_tracer
$ cat /sys/kernel/debug/tracing/trace_pipe > mydump.txt &
Start X or whatever.
$ echo "X is up" > /debug/tracing/trace_marker
$ echo nop > /debug/tracing/current_tracer
$ echo "X is up" > /sys/kernel/debug/tracing/trace_marker
$ echo nop > /sys/kernel/debug/tracing/current_tracer
Check for lost events.
Usage
-----
Make sure debugfs is mounted to /debug. If not, (requires root privileges)
$ mount -t debugfs debugfs /debug
Make sure debugfs is mounted to /sys/kernel/debug. If not, (requires root privileges)
$ mount -t debugfs debugfs /sys/kernel/debug
Check that the driver you are about to trace is not loaded.
Activate mmiotrace (requires root privileges):
$ echo mmiotrace > /debug/tracing/current_tracer
$ echo mmiotrace > /sys/kernel/debug/tracing/current_tracer
Start storing the trace:
$ cat /debug/tracing/trace_pipe > mydump.txt &
$ cat /sys/kernel/debug/tracing/trace_pipe > mydump.txt &
The 'cat' process should stay running (sleeping) in the background.
Load the driver you want to trace and use it. Mmiotrace will only catch MMIO
accesses to areas that are ioremapped while mmiotrace is active.
During tracing you can place comments (markers) into the trace by
$ echo "X is up" > /debug/tracing/trace_marker
$ echo "X is up" > /sys/kernel/debug/tracing/trace_marker
This makes it easier to see which part of the (huge) trace corresponds to
which action. It is recommended to place descriptive markers about what you
do.
Shut down mmiotrace (requires root privileges):
$ echo nop > /debug/tracing/current_tracer
$ echo nop > /sys/kernel/debug/tracing/current_tracer
The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
pressing ctrl+c.
@ -78,10 +78,10 @@ to view your kernel log and look for "mmiotrace has lost events" warning. If
events were lost, the trace is incomplete. You should enlarge the buffers and
try again. Buffers are enlarged by first seeing how large the current buffers
are:
$ cat /debug/tracing/buffer_size_kb
$ cat /sys/kernel/debug/tracing/buffer_size_kb
gives you a number. Approximately double this number and write it back, for
instance:
$ echo 128000 > /debug/tracing/buffer_size_kb
$ echo 128000 > /sys/kernel/debug/tracing/buffer_size_kb
Then start again from the top.
If you are doing a trace for a driver project, e.g. Nouveau, you should also

View File

@ -16,3 +16,8 @@
15 -> TeVii S470 [d470:9022]
16 -> DVBWorld DVB-S2 2005 [0001:2005]
17 -> NetUP Dual DVB-S2 CI [1b55:2a2c]
18 -> Hauppauge WinTV-HVR1270 [0070:2211]
19 -> Hauppauge WinTV-HVR1275 [0070:2215]
20 -> Hauppauge WinTV-HVR1255 [0070:2251]
21 -> Hauppauge WinTV-HVR1210 [0070:2291,0070:2295]
22 -> Mygica X8506 DMB-TH [14f1:8651]

View File

@ -78,3 +78,5 @@
77 -> TBS 8910 DVB-S [8910:8888]
78 -> Prof 6200 DVB-S [b022:3022]
79 -> Terratec Cinergy HT PCI MKII [153b:1177]
80 -> Hauppauge WinTV-IR Only [0070:9290]
81 -> Leadtek WinFast DTV1800 Hybrid [107d:6654]

View File

@ -17,7 +17,7 @@
16 -> Hauppauge WinTV HVR 950 (em2883) [2040:6513,2040:6517,2040:651b]
17 -> Pinnacle PCTV HD Pro Stick (em2880) [2304:0227]
18 -> Hauppauge WinTV HVR 900 (R2) (em2880) [2040:6502]
19 -> PointNix Intra-Oral Camera (em2860)
19 -> EM2860/SAA711X Reference Design (em2860)
20 -> AMD ATI TV Wonder HD 600 (em2880) [0438:b002]
21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800) [eb1a:2801]
22 -> Unknown EM2750/EM2751 webcam grabber (em2750) [eb1a:2750,eb1a:2751]
@ -61,3 +61,7 @@
63 -> Kaiomy TVnPC U2 (em2860) [eb1a:e303]
64 -> Easy Cap Capture DC-60 (em2860)
65 -> IO-DATA GV-MVP/SZ (em2820/em2840) [04bb:0515]
66 -> Empire dual TV (em2880)
67 -> Terratec Grabby (em2860) [0ccd:0096]
68 -> Terratec AV350 (em2860) [0ccd:0084]
69 -> KWorld ATSC 315U HDTV TV Box (em2882) [eb1a:a313]

View File

@ -124,10 +124,10 @@
123 -> Beholder BeholdTV 407 [0000:4070]
124 -> Beholder BeholdTV 407 FM [0000:4071]
125 -> Beholder BeholdTV 409 [0000:4090]
126 -> Beholder BeholdTV 505 FM/RDS [0000:5051,0000:505B,5ace:5050]
127 -> Beholder BeholdTV 507 FM/RDS / BeholdTV 509 FM [0000:5071,0000:507B,5ace:5070,5ace:5090]
126 -> Beholder BeholdTV 505 FM [5ace:5050]
127 -> Beholder BeholdTV 507 FM / BeholdTV 509 FM [5ace:5070,5ace:5090]
128 -> Beholder BeholdTV Columbus TVFM [0000:5201]
129 -> Beholder BeholdTV 607 / BeholdTV 609 [5ace:6070,5ace:6071,5ace:6072,5ace:6073,5ace:6090,5ace:6091,5ace:6092,5ace:6093]
129 -> Beholder BeholdTV 607 FM [5ace:6070]
130 -> Beholder BeholdTV M6 [5ace:6190]
131 -> Twinhan Hybrid DTV-DVB 3056 PCI [1822:0022]
132 -> Genius TVGO AM11MCE
@ -143,7 +143,7 @@
142 -> Beholder BeholdTV H6 [5ace:6290]
143 -> Beholder BeholdTV M63 [5ace:6191]
144 -> Beholder BeholdTV M6 Extra [5ace:6193]
145 -> AVerMedia MiniPCI DVB-T Hybrid M103 [1461:f636]
145 -> AVerMedia MiniPCI DVB-T Hybrid M103 [1461:f636,1461:f736]
146 -> ASUSTeK P7131 Analog
147 -> Asus Tiger 3in1 [1043:4878]
148 -> Encore ENLTV-FM v5.3 [1a7f:2008]
@ -154,4 +154,16 @@
153 -> Kworld Plus TV Analog Lite PCI [17de:7128]
154 -> Avermedia AVerTV GO 007 FM Plus [1461:f31d]
155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid [0070:6706,0070:6708]
156 -> Hauppauge WinTV-HVR1110r3 [0070:6707,0070:6709,0070:670a]
156 -> Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid [0070:6707,0070:6709,0070:670a]
157 -> Avermedia AVerTV Studio 507UA [1461:a11b]
158 -> AVerMedia Cardbus TV/Radio (E501R) [1461:b7e9]
159 -> Beholder BeholdTV 505 RDS [0000:505B]
160 -> Beholder BeholdTV 507 RDS [0000:5071]
161 -> Beholder BeholdTV 507 RDS [0000:507B]
162 -> Beholder BeholdTV 607 FM [5ace:6071]
163 -> Beholder BeholdTV 609 FM [5ace:6090]
164 -> Beholder BeholdTV 609 FM [5ace:6091]
165 -> Beholder BeholdTV 607 RDS [5ace:6072]
166 -> Beholder BeholdTV 607 RDS [5ace:6073]
167 -> Beholder BeholdTV 609 RDS [5ace:6092]
168 -> Beholder BeholdTV 609 RDS [5ace:6093]

View File

@ -76,3 +76,5 @@ tuner=75 - Philips TEA5761 FM Radio
tuner=76 - Xceive 5000 tuner
tuner=77 - TCL tuner MF02GIP-5N-E
tuner=78 - Philips FMD1216MEX MK3 Hybrid Tuner
tuner=79 - Philips PAL/SECAM multi (FM1216 MK5)
tuner=80 - Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough

View File

@ -163,10 +163,11 @@ sunplus 055f:c650 Mustek MDC5500Z
zc3xx 055f:d003 Mustek WCam300A
zc3xx 055f:d004 Mustek WCam300 AN
conex 0572:0041 Creative Notebook cx11646
ov519 05a9:0519 OmniVision
ov519 05a9:0519 OV519 Microphone
ov519 05a9:0530 OmniVision
ov519 05a9:4519 OmniVision
ov519 05a9:4519 Webcam Classic
ov519 05a9:8519 OmniVision
ov519 05a9:a518 D-Link DSB-C310 Webcam
sunplus 05da:1018 Digital Dream Enigma 1.3
stk014 05e1:0893 Syntek DV4000
spca561 060b:a001 Maxell Compact Pc PM3
@ -178,6 +179,7 @@ spca506 06e1:a190 ADS Instant VCD
ov534 06f8:3002 Hercules Blog Webcam
ov534 06f8:3003 Hercules Dualpix HD Weblog
sonixj 06f8:3004 Hercules Classic Silver
sonixj 06f8:3008 Hercules Deluxe Optical Glass
spca508 0733:0110 ViewQuest VQ110
spca508 0130:0130 Clone Digital Webcam 11043
spca501 0733:0401 Intel Create and Share
@ -209,6 +211,7 @@ sunplus 08ca:2050 Medion MD 41437
sunplus 08ca:2060 Aiptek PocketDV5300
tv8532 0923:010f ICM532 cams
mars 093a:050f Mars-Semi Pc-Camera
mr97310a 093a:010f Sakar Digital no. 77379
pac207 093a:2460 Qtec Webcam 100
pac207 093a:2461 HP Webcam
pac207 093a:2463 Philips SPC 220 NC
@ -265,6 +268,11 @@ sonixj 0c45:60ec SN9C105+MO4000
sonixj 0c45:60fb Surfer NoName
sonixj 0c45:60fc LG-LIC300
sonixj 0c45:60fe Microdia Audio
sonixj 0c45:6100 PC Camera (SN9C128)
sonixj 0c45:610a PC Camera (SN9C128)
sonixj 0c45:610b PC Camera (SN9C128)
sonixj 0c45:610c PC Camera (SN9C128)
sonixj 0c45:610e PC Camera (SN9C128)
sonixj 0c45:6128 Microdia/Sonix SNP325
sonixj 0c45:612a Avant Camera
sonixj 0c45:612c Typhoon Rasy Cam 1.3MPix

View File

@ -26,6 +26,55 @@ Global video workflow
Once the last buffer is filled in, the QCI interface stops.
c) Capture global finite state machine schema
+----+ +---+ +----+
| DQ | | Q | | DQ |
| v | v | v
+-----------+ +------------------------+
| STOP | | Wait for capture start |
+-----------+ Q +------------------------+
+-> | QCI: stop | ------------------> | QCI: run | <------------+
| | DMA: stop | | DMA: stop | |
| +-----------+ +-----> +------------------------+ |
| / | |
| / +---+ +----+ | |
|capture list empty / | Q | | DQ | | QCI Irq EOF |
| / | v | v v |
| +--------------------+ +----------------------+ |
| | DMA hotlink missed | | Capture running | |
| +--------------------+ +----------------------+ |
| | QCI: run | +-----> | QCI: run | <-+ |
| | DMA: stop | / | DMA: run | | |
| +--------------------+ / +----------------------+ | Other |
| ^ /DMA still | | channels |
| | capture list / running | DMA Irq End | not |
| | not empty / | | finished |
| | / v | yet |
| +----------------------+ +----------------------+ | |
| | Videobuf released | | Channel completed | | |
| +----------------------+ +----------------------+ | |
+-- | QCI: run | | QCI: run | --+ |
| DMA: run | | DMA: run | |
+----------------------+ +----------------------+ |
^ / | |
| no overrun / | overrun |
| / v |
+--------------------+ / +----------------------+ |
| Frame completed | / | Frame overran | |
+--------------------+ <-----+ +----------------------+ restart frame |
| QCI: run | | QCI: stop | --------------+
| DMA: run | | DMA: stop |
+--------------------+ +----------------------+
Legend: - each box is a FSM state
- each arrow is the condition to transition to another state
- an arrow with a comment is a mandatory transition (no condition)
- arrow "Q" means : a buffer was enqueued
- arrow "DQ" means : a buffer was dequeued
- "QCI: stop" means the QCI interface is not enabled
- "DMA: stop" means all 3 DMA channels are stopped
- "DMA: run" means at least 1 DMA channel is still running
DMA usage
---------

View File

@ -89,6 +89,11 @@ from dev (driver name followed by the bus_id, to be precise). If you set it
up before calling v4l2_device_register then it will be untouched. If dev is
NULL, then you *must* setup v4l2_dev->name before calling v4l2_device_register.
You can use v4l2_device_set_name() to set the name based on a driver name and
a driver-global atomic_t instance. This will generate names like ivtv0, ivtv1,
etc. If the name ends with a digit, then it will insert a dash: cx18-0,
cx18-1, etc. This function returns the instance number.
The first 'dev' argument is normally the struct device pointer of a pci_dev,
usb_interface or platform_device. It is rare for dev to be NULL, but it happens
with ISA devices or when one device creates multiple PCI devices, thus making

View File

@ -2,7 +2,7 @@
obj- := dummy.o
# List of programs to build
hostprogs-y := slabinfo
hostprogs-y := slabinfo page-types
# Tell kbuild to always build the programs
always := $(hostprogs-y)

View File

@ -75,15 +75,15 @@ Page stealing from process memory and shm is done if stealing the page would
alleviate memory pressure on any zone in the page's node that has fallen below
its watermark.
pages_min/pages_low/pages_high/low_on_memory/zone_wake_kswapd: These are
per-zone fields, used to determine when a zone needs to be balanced. When
the number of pages falls below pages_min, the hysteric field low_on_memory
gets set. This stays set till the number of free pages becomes pages_high.
When low_on_memory is set, page allocation requests will try to free some
pages in the zone (providing GFP_WAIT is set in the request). Orthogonal
to this, is the decision to poke kswapd to free some zone pages. That
decision is not hysteresis based, and is done when the number of free
pages is below pages_low; in which case zone_wake_kswapd is also set.
watemark[WMARK_MIN/WMARK_LOW/WMARK_HIGH]/low_on_memory/zone_wake_kswapd: These
are per-zone fields, used to determine when a zone needs to be balanced. When
the number of pages falls below watermark[WMARK_MIN], the hysteric field
low_on_memory gets set. This stays set till the number of free pages becomes
watermark[WMARK_HIGH]. When low_on_memory is set, page allocation requests will
try to free some pages in the zone (providing GFP_WAIT is set in the request).
Orthogonal to this, is the decision to poke kswapd to free some zone pages.
That decision is not hysteresis based, and is done when the number of free
pages is below watermark[WMARK_LOW]; in which case zone_wake_kswapd is also set.
(Good) Ideas that I have heard:

View File

@ -0,0 +1,698 @@
/*
* page-types: Tool for querying page flags
*
* Copyright (C) 2009 Intel corporation
* Copyright (C) 2009 Wu Fengguang <fengguang.wu@intel.com>
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdint.h>
#include <stdarg.h>
#include <string.h>
#include <getopt.h>
#include <limits.h>
#include <sys/types.h>
#include <sys/errno.h>
#include <sys/fcntl.h>
/*
* kernel page flags
*/
#define KPF_BYTES 8
#define PROC_KPAGEFLAGS "/proc/kpageflags"
/* copied from kpageflags_read() */
#define KPF_LOCKED 0
#define KPF_ERROR 1
#define KPF_REFERENCED 2
#define KPF_UPTODATE 3
#define KPF_DIRTY 4
#define KPF_LRU 5
#define KPF_ACTIVE 6
#define KPF_SLAB 7
#define KPF_WRITEBACK 8
#define KPF_RECLAIM 9
#define KPF_BUDDY 10
/* [11-20] new additions in 2.6.31 */
#define KPF_MMAP 11
#define KPF_ANON 12
#define KPF_SWAPCACHE 13
#define KPF_SWAPBACKED 14
#define KPF_COMPOUND_HEAD 15
#define KPF_COMPOUND_TAIL 16
#define KPF_HUGE 17
#define KPF_UNEVICTABLE 18
#define KPF_NOPAGE 20
/* [32-] kernel hacking assistances */
#define KPF_RESERVED 32
#define KPF_MLOCKED 33
#define KPF_MAPPEDTODISK 34
#define KPF_PRIVATE 35
#define KPF_PRIVATE_2 36
#define KPF_OWNER_PRIVATE 37
#define KPF_ARCH 38
#define KPF_UNCACHED 39
/* [48-] take some arbitrary free slots for expanding overloaded flags
* not part of kernel API
*/
#define KPF_READAHEAD 48
#define KPF_SLOB_FREE 49
#define KPF_SLUB_FROZEN 50
#define KPF_SLUB_DEBUG 51
#define KPF_ALL_BITS ((uint64_t)~0ULL)
#define KPF_HACKERS_BITS (0xffffULL << 32)
#define KPF_OVERLOADED_BITS (0xffffULL << 48)
#define BIT(name) (1ULL << KPF_##name)
#define BITS_COMPOUND (BIT(COMPOUND_HEAD) | BIT(COMPOUND_TAIL))
static char *page_flag_names[] = {
[KPF_LOCKED] = "L:locked",
[KPF_ERROR] = "E:error",
[KPF_REFERENCED] = "R:referenced",
[KPF_UPTODATE] = "U:uptodate",
[KPF_DIRTY] = "D:dirty",
[KPF_LRU] = "l:lru",
[KPF_ACTIVE] = "A:active",
[KPF_SLAB] = "S:slab",
[KPF_WRITEBACK] = "W:writeback",
[KPF_RECLAIM] = "I:reclaim",
[KPF_BUDDY] = "B:buddy",
[KPF_MMAP] = "M:mmap",
[KPF_ANON] = "a:anonymous",
[KPF_SWAPCACHE] = "s:swapcache",
[KPF_SWAPBACKED] = "b:swapbacked",
[KPF_COMPOUND_HEAD] = "H:compound_head",
[KPF_COMPOUND_TAIL] = "T:compound_tail",
[KPF_HUGE] = "G:huge",
[KPF_UNEVICTABLE] = "u:unevictable",
[KPF_NOPAGE] = "n:nopage",
[KPF_RESERVED] = "r:reserved",
[KPF_MLOCKED] = "m:mlocked",
[KPF_MAPPEDTODISK] = "d:mappedtodisk",
[KPF_PRIVATE] = "P:private",
[KPF_PRIVATE_2] = "p:private_2",
[KPF_OWNER_PRIVATE] = "O:owner_private",
[KPF_ARCH] = "h:arch",
[KPF_UNCACHED] = "c:uncached",
[KPF_READAHEAD] = "I:readahead",
[KPF_SLOB_FREE] = "P:slob_free",
[KPF_SLUB_FROZEN] = "A:slub_frozen",
[KPF_SLUB_DEBUG] = "E:slub_debug",
};
/*
* data structures
*/
static int opt_raw; /* for kernel developers */
static int opt_list; /* list pages (in ranges) */
static int opt_no_summary; /* don't show summary */
static pid_t opt_pid; /* process to walk */
#define MAX_ADDR_RANGES 1024
static int nr_addr_ranges;
static unsigned long opt_offset[MAX_ADDR_RANGES];
static unsigned long opt_size[MAX_ADDR_RANGES];
#define MAX_BIT_FILTERS 64
static int nr_bit_filters;
static uint64_t opt_mask[MAX_BIT_FILTERS];
static uint64_t opt_bits[MAX_BIT_FILTERS];
static int page_size;
#define PAGES_BATCH (64 << 10) /* 64k pages */
static int kpageflags_fd;
static uint64_t kpageflags_buf[KPF_BYTES * PAGES_BATCH];
#define HASH_SHIFT 13
#define HASH_SIZE (1 << HASH_SHIFT)
#define HASH_MASK (HASH_SIZE - 1)
#define HASH_KEY(flags) (flags & HASH_MASK)
static unsigned long total_pages;
static unsigned long nr_pages[HASH_SIZE];
static uint64_t page_flags[HASH_SIZE];
/*
* helper functions
*/
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#define min_t(type, x, y) ({ \
type __min1 = (x); \
type __min2 = (y); \
__min1 < __min2 ? __min1 : __min2; })
unsigned long pages2mb(unsigned long pages)
{
return (pages * page_size) >> 20;
}
void fatal(const char *x, ...)
{
va_list ap;
va_start(ap, x);
vfprintf(stderr, x, ap);
va_end(ap);
exit(EXIT_FAILURE);
}
/*
* page flag names
*/
char *page_flag_name(uint64_t flags)
{
static char buf[65];
int present;
int i, j;
for (i = 0, j = 0; i < ARRAY_SIZE(page_flag_names); i++) {
present = (flags >> i) & 1;
if (!page_flag_names[i]) {
if (present)
fatal("unkown flag bit %d\n", i);
continue;
}
buf[j++] = present ? page_flag_names[i][0] : '_';
}
return buf;
}
char *page_flag_longname(uint64_t flags)
{
static char buf[1024];
int i, n;
for (i = 0, n = 0; i < ARRAY_SIZE(page_flag_names); i++) {
if (!page_flag_names[i])
continue;
if ((flags >> i) & 1)
n += snprintf(buf + n, sizeof(buf) - n, "%s,",
page_flag_names[i] + 2);
}
if (n)
n--;
buf[n] = '\0';
return buf;
}
/*
* page list and summary
*/
void show_page_range(unsigned long offset, uint64_t flags)
{
static uint64_t flags0;
static unsigned long index;
static unsigned long count;
if (flags == flags0 && offset == index + count) {
count++;
return;
}
if (count)
printf("%lu\t%lu\t%s\n",
index, count, page_flag_name(flags0));
flags0 = flags;
index = offset;
count = 1;
}
void show_page(unsigned long offset, uint64_t flags)
{
printf("%lu\t%s\n", offset, page_flag_name(flags));
}
void show_summary(void)
{
int i;
printf(" flags\tpage-count MB"
" symbolic-flags\t\t\tlong-symbolic-flags\n");
for (i = 0; i < ARRAY_SIZE(nr_pages); i++) {
if (nr_pages[i])
printf("0x%016llx\t%10lu %8lu %s\t%s\n",
(unsigned long long)page_flags[i],
nr_pages[i],
pages2mb(nr_pages[i]),
page_flag_name(page_flags[i]),
page_flag_longname(page_flags[i]));
}
printf(" total\t%10lu %8lu\n",
total_pages, pages2mb(total_pages));
}
/*
* page flag filters
*/
int bit_mask_ok(uint64_t flags)
{
int i;
for (i = 0; i < nr_bit_filters; i++) {
if (opt_bits[i] == KPF_ALL_BITS) {
if ((flags & opt_mask[i]) == 0)
return 0;
} else {
if ((flags & opt_mask[i]) != opt_bits[i])
return 0;
}
}
return 1;
}
uint64_t expand_overloaded_flags(uint64_t flags)
{
/* SLOB/SLUB overload several page flags */
if (flags & BIT(SLAB)) {
if (flags & BIT(PRIVATE))
flags ^= BIT(PRIVATE) | BIT(SLOB_FREE);
if (flags & BIT(ACTIVE))
flags ^= BIT(ACTIVE) | BIT(SLUB_FROZEN);
if (flags & BIT(ERROR))
flags ^= BIT(ERROR) | BIT(SLUB_DEBUG);
}
/* PG_reclaim is overloaded as PG_readahead in the read path */
if ((flags & (BIT(RECLAIM) | BIT(WRITEBACK))) == BIT(RECLAIM))
flags ^= BIT(RECLAIM) | BIT(READAHEAD);
return flags;
}
uint64_t well_known_flags(uint64_t flags)
{
/* hide flags intended only for kernel hacker */
flags &= ~KPF_HACKERS_BITS;
/* hide non-hugeTLB compound pages */
if ((flags & BITS_COMPOUND) && !(flags & BIT(HUGE)))
flags &= ~BITS_COMPOUND;
return flags;
}
/*
* page frame walker
*/
int hash_slot(uint64_t flags)
{
int k = HASH_KEY(flags);
int i;
/* Explicitly reserve slot 0 for flags 0: the following logic
* cannot distinguish an unoccupied slot from slot (flags==0).
*/
if (flags == 0)
return 0;
/* search through the remaining (HASH_SIZE-1) slots */
for (i = 1; i < ARRAY_SIZE(page_flags); i++, k++) {
if (!k || k >= ARRAY_SIZE(page_flags))
k = 1;
if (page_flags[k] == 0) {
page_flags[k] = flags;
return k;
}
if (page_flags[k] == flags)
return k;
}
fatal("hash table full: bump up HASH_SHIFT?\n");
exit(EXIT_FAILURE);
}
void add_page(unsigned long offset, uint64_t flags)
{
flags = expand_overloaded_flags(flags);
if (!opt_raw)
flags = well_known_flags(flags);
if (!bit_mask_ok(flags))
return;
if (opt_list == 1)
show_page_range(offset, flags);
else if (opt_list == 2)
show_page(offset, flags);
nr_pages[hash_slot(flags)]++;
total_pages++;
}
void walk_pfn(unsigned long index, unsigned long count)
{
unsigned long batch;
unsigned long n;
unsigned long i;
if (index > ULONG_MAX / KPF_BYTES)
fatal("index overflow: %lu\n", index);
lseek(kpageflags_fd, index * KPF_BYTES, SEEK_SET);
while (count) {
batch = min_t(unsigned long, count, PAGES_BATCH);
n = read(kpageflags_fd, kpageflags_buf, batch * KPF_BYTES);
if (n == 0)
break;
if (n < 0) {
perror(PROC_KPAGEFLAGS);
exit(EXIT_FAILURE);
}
if (n % KPF_BYTES != 0)
fatal("partial read: %lu bytes\n", n);
n = n / KPF_BYTES;
for (i = 0; i < n; i++)
add_page(index + i, kpageflags_buf[i]);
index += batch;
count -= batch;
}
}
void walk_addr_ranges(void)
{
int i;
kpageflags_fd = open(PROC_KPAGEFLAGS, O_RDONLY);
if (kpageflags_fd < 0) {
perror(PROC_KPAGEFLAGS);
exit(EXIT_FAILURE);
}
if (!nr_addr_ranges)
walk_pfn(0, ULONG_MAX);
for (i = 0; i < nr_addr_ranges; i++)
walk_pfn(opt_offset[i], opt_size[i]);
close(kpageflags_fd);
}
/*
* user interface
*/
const char *page_flag_type(uint64_t flag)
{
if (flag & KPF_HACKERS_BITS)
return "(r)";
if (flag & KPF_OVERLOADED_BITS)
return "(o)";
return " ";
}
void usage(void)
{
int i, j;
printf(
"page-types [options]\n"
" -r|--raw Raw mode, for kernel developers\n"
" -a|--addr addr-spec Walk a range of pages\n"
" -b|--bits bits-spec Walk pages with specified bits\n"
#if 0 /* planned features */
" -p|--pid pid Walk process address space\n"
" -f|--file filename Walk file address space\n"
#endif
" -l|--list Show page details in ranges\n"
" -L|--list-each Show page details one by one\n"
" -N|--no-summary Don't show summay info\n"
" -h|--help Show this usage message\n"
"addr-spec:\n"
" N one page at offset N (unit: pages)\n"
" N+M pages range from N to N+M-1\n"
" N,M pages range from N to M-1\n"
" N, pages range from N to end\n"
" ,M pages range from 0 to M\n"
"bits-spec:\n"
" bit1,bit2 (flags & (bit1|bit2)) != 0\n"
" bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1\n"
" bit1,~bit2 (flags & (bit1|bit2)) == bit1\n"
" =bit1,bit2 flags == (bit1|bit2)\n"
"bit-names:\n"
);
for (i = 0, j = 0; i < ARRAY_SIZE(page_flag_names); i++) {
if (!page_flag_names[i])
continue;
printf("%16s%s", page_flag_names[i] + 2,
page_flag_type(1ULL << i));
if (++j > 3) {
j = 0;
putchar('\n');
}
}
printf("\n "
"(r) raw mode bits (o) overloaded bits\n");
}
unsigned long long parse_number(const char *str)
{
unsigned long long n;
n = strtoll(str, NULL, 0);
if (n == 0 && str[0] != '0')
fatal("invalid name or number: %s\n", str);
return n;
}
void parse_pid(const char *str)
{
opt_pid = parse_number(str);
}
void parse_file(const char *name)
{
}
void add_addr_range(unsigned long offset, unsigned long size)
{
if (nr_addr_ranges >= MAX_ADDR_RANGES)
fatal("too much addr ranges\n");
opt_offset[nr_addr_ranges] = offset;
opt_size[nr_addr_ranges] = size;
nr_addr_ranges++;
}
void parse_addr_range(const char *optarg)
{
unsigned long offset;
unsigned long size;
char *p;
p = strchr(optarg, ',');
if (!p)
p = strchr(optarg, '+');
if (p == optarg) {
offset = 0;
size = parse_number(p + 1);
} else if (p) {
offset = parse_number(optarg);
if (p[1] == '\0')
size = ULONG_MAX;
else {
size = parse_number(p + 1);
if (*p == ',') {
if (size < offset)
fatal("invalid range: %lu,%lu\n",
offset, size);
size -= offset;
}
}
} else {
offset = parse_number(optarg);
size = 1;
}
add_addr_range(offset, size);
}
void add_bits_filter(uint64_t mask, uint64_t bits)
{
if (nr_bit_filters >= MAX_BIT_FILTERS)
fatal("too much bit filters\n");
opt_mask[nr_bit_filters] = mask;
opt_bits[nr_bit_filters] = bits;
nr_bit_filters++;
}
uint64_t parse_flag_name(const char *str, int len)
{
int i;
if (!*str || !len)
return 0;
if (len <= 8 && !strncmp(str, "compound", len))
return BITS_COMPOUND;
for (i = 0; i < ARRAY_SIZE(page_flag_names); i++) {
if (!page_flag_names[i])
continue;
if (!strncmp(str, page_flag_names[i] + 2, len))
return 1ULL << i;
}
return parse_number(str);
}
uint64_t parse_flag_names(const char *str, int all)
{
const char *p = str;
uint64_t flags = 0;
while (1) {
if (*p == ',' || *p == '=' || *p == '\0') {
if ((*str != '~') || (*str == '~' && all && *++str))
flags |= parse_flag_name(str, p - str);
if (*p != ',')
break;
str = p + 1;
}
p++;
}
return flags;
}
void parse_bits_mask(const char *optarg)
{
uint64_t mask;
uint64_t bits;
const char *p;
p = strchr(optarg, '=');
if (p == optarg) {
mask = KPF_ALL_BITS;
bits = parse_flag_names(p + 1, 0);
} else if (p) {
mask = parse_flag_names(optarg, 0);
bits = parse_flag_names(p + 1, 0);
} else if (strchr(optarg, '~')) {
mask = parse_flag_names(optarg, 1);
bits = parse_flag_names(optarg, 0);
} else {
mask = parse_flag_names(optarg, 0);
bits = KPF_ALL_BITS;
}
add_bits_filter(mask, bits);
}
struct option opts[] = {
{ "raw" , 0, NULL, 'r' },
{ "pid" , 1, NULL, 'p' },
{ "file" , 1, NULL, 'f' },
{ "addr" , 1, NULL, 'a' },
{ "bits" , 1, NULL, 'b' },
{ "list" , 0, NULL, 'l' },
{ "list-each" , 0, NULL, 'L' },
{ "no-summary", 0, NULL, 'N' },
{ "help" , 0, NULL, 'h' },
{ NULL , 0, NULL, 0 }
};
int main(int argc, char *argv[])
{
int c;
page_size = getpagesize();
while ((c = getopt_long(argc, argv,
"rp:f:a:b:lLNh", opts, NULL)) != -1) {
switch (c) {
case 'r':
opt_raw = 1;
break;
case 'p':
parse_pid(optarg);
break;
case 'f':
parse_file(optarg);
break;
case 'a':
parse_addr_range(optarg);
break;
case 'b':
parse_bits_mask(optarg);
break;
case 'l':
opt_list = 1;
break;
case 'L':
opt_list = 2;
break;
case 'N':
opt_no_summary = 1;
break;
case 'h':
usage();
exit(0);
default:
usage();
exit(1);
}
}
if (opt_list == 1)
printf("offset\tcount\tflags\n");
if (opt_list == 2)
printf("offset\tflags\n");
walk_addr_ranges();
if (opt_list == 1)
show_page_range(0, 0); /* drain the buffer */
if (opt_no_summary)
return 0;
if (opt_list)
printf("\n\n");
show_summary();
return 0;
}

View File

@ -12,9 +12,9 @@ There are three components to pagemap:
value for each virtual page, containing the following data (from
fs/proc/task_mmu.c, above pagemap_read):
* Bits 0-55 page frame number (PFN) if present
* Bits 0-54 page frame number (PFN) if present
* Bits 0-4 swap type if swapped
* Bits 5-55 swap offset if swapped
* Bits 5-54 swap offset if swapped
* Bits 55-60 page shift (page size = 1<<page shift)
* Bit 61 reserved for future use
* Bit 62 page swapped
@ -36,7 +36,7 @@ There are three components to pagemap:
* /proc/kpageflags. This file contains a 64-bit set of flags for each
page, indexed by PFN.
The flags are (from fs/proc/proc_misc, above kpageflags_read):
The flags are (from fs/proc/page.c, above kpageflags_read):
0. LOCKED
1. ERROR
@ -49,6 +49,68 @@ There are three components to pagemap:
8. WRITEBACK
9. RECLAIM
10. BUDDY
11. MMAP
12. ANON
13. SWAPCACHE
14. SWAPBACKED
15. COMPOUND_HEAD
16. COMPOUND_TAIL
16. HUGE
18. UNEVICTABLE
20. NOPAGE
Short descriptions to the page flags:
0. LOCKED
page is being locked for exclusive access, eg. by undergoing read/write IO
7. SLAB
page is managed by the SLAB/SLOB/SLUB/SLQB kernel memory allocator
When compound page is used, SLUB/SLQB will only set this flag on the head
page; SLOB will not flag it at all.
10. BUDDY
a free memory block managed by the buddy system allocator
The buddy system organizes free memory in blocks of various orders.
An order N block has 2^N physically contiguous pages, with the BUDDY flag
set for and _only_ for the first page.
15. COMPOUND_HEAD
16. COMPOUND_TAIL
A compound page with order N consists of 2^N physically contiguous pages.
A compound page with order 2 takes the form of "HTTT", where H donates its
head page and T donates its tail page(s). The major consumers of compound
pages are hugeTLB pages (Documentation/vm/hugetlbpage.txt), the SLUB etc.
memory allocators and various device drivers. However in this interface,
only huge/giga pages are made visible to end users.
17. HUGE
this is an integral part of a HugeTLB page
20. NOPAGE
no page frame exists at the requested address
[IO related page flags]
1. ERROR IO error occurred
3. UPTODATE page has up-to-date data
ie. for file backed page: (in-memory data revision >= on-disk one)
4. DIRTY page has been written to, hence contains new data
ie. for file backed page: (in-memory data revision > on-disk one)
8. WRITEBACK page is being synced to disk
[LRU related page flags]
5. LRU page is in one of the LRU lists
6. ACTIVE page is in the active LRU list
18. UNEVICTABLE page is in the unevictable (non-)LRU list
It is somehow pinned and not a candidate for LRU page reclaims,
eg. ramfs pages, shmctl(SHM_LOCK) and mlock() memory segments
2. REFERENCED page has been referenced since last LRU list enqueue/requeue
9. RECLAIM page will be reclaimed soon after its pageout IO completed
11. MMAP a memory mapped page
12. ANON a memory mapped page that is not part of a file
13. SWAPCACHE page is mapped to swap space, ie. has an associated swap entry
14. SWAPBACKED page is backed by swap/RAM
The page-types tool in this directory can be used to query the above flags.
Using pagemap to do something useful:

View File

@ -36,6 +36,12 @@ trivial patch so apply some common sense.
(scripts/checkpatch.pl) to catch trival style violations.
See Documentation/CodingStyle for guidance here.
PLEASE CC: the maintainers and mailing lists that are generated
by scripts/get_maintainer.pl. The results returned by the
script will be best if you have git installed and are making
your changes in a branch derived from Linus' latest git tree.
See Documentation/SubmittingPatches for details.
PLEASE try to include any credit lines you want added with the
patch. It avoids people being missed off by mistake and makes
it easier to know who wants adding and who doesn't.
@ -489,7 +495,7 @@ AOA (Apple Onboard Audio) ALSA DRIVER
P: Johannes Berg
M: johannes@sipsolutions.net
L: linuxppc-dev@ozlabs.org
L: alsa-devel@alsa-project.org (subscribers-only)
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Maintained
F: sound/aoa/
@ -912,7 +918,6 @@ P: Dan Williams
M: dan.j.williams@intel.com
P: Maciej Sosnowski
M: maciej.sosnowski@intel.com
L: linux-kernel@vger.kernel.org
W: http://sourceforge.net/projects/xscaleiop
S: Supported
F: Documentation/crypto/async-tx-api.txt
@ -1008,7 +1013,6 @@ F: drivers/mmc/host/at91_mci.c
ATMEL AT91 / AT32 SERIAL DRIVER
P: Haavard Skinnemoen
M: hskinnemoen@atmel.com
L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/serial/atmel_serial.c
@ -1064,7 +1068,6 @@ F: kernel/audit*
AUXILIARY DISPLAY DRIVERS
P: Miguel Ojeda Sandonis
M: miguel.ojeda.sandonis@gmail.com
L: linux-kernel@vger.kernel.org
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
@ -1134,7 +1137,6 @@ F: drivers/net/hamradio/baycom*
BEFS FILE SYSTEM
P: Sergey S. Kostyliov
M: rathamahata@php4.ru
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/befs.txt
F: fs/befs/
@ -1142,7 +1144,6 @@ F: fs/befs/
BFS FILE SYSTEM
P: Tigran A. Aivazian
M: tigran@aivazian.fsnet.co.uk
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/bfs.txt
F: fs/bfs/
@ -1199,7 +1200,6 @@ F: drivers/i2c/busses/i2c-bfin-twi.c
BLOCK LAYER
P: Jens Axboe
M: axboe@kernel.dk
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
S: Maintained
F: block/
@ -1326,7 +1326,6 @@ P: Muli Ben-Yehuda
M: muli@il.ibm.com
P: Jon D. Mason
M: jdmason@kudzu.us
L: linux-kernel@vger.kernel.org
L: discuss@x86-64.org
S: Maintained
F: arch/x86/kernel/pci-calgary_64.c
@ -1378,7 +1377,6 @@ F: include/linux/usb/wusb*
CFAG12864B LCD DRIVER
P: Miguel Ojeda Sandonis
M: miguel.ojeda.sandonis@gmail.com
L: linux-kernel@vger.kernel.org
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
@ -1388,7 +1386,6 @@ F: include/linux/cfag12864b.h
CFAG12864BFB LCD FRAMEBUFFER DRIVER
P: Miguel Ojeda Sandonis
M: miguel.ojeda.sandonis@gmail.com
L: linux-kernel@vger.kernel.org
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
@ -1408,7 +1405,6 @@ X: net/wireless/wext*
CHECKPATCH
P: Andy Whitcroft
M: apw@canonical.com
L: linux-kernel@vger.kernel.org
S: Supported
F: scripts/checkpatch.pl
@ -1437,7 +1433,7 @@ F: drivers/usb/host/ohci-ep93xx.c
CIRRUS LOGIC CS4270 SOUND DRIVER
P: Timur Tabi
M: timur@freescale.com
L: alsa-devel@alsa-project.org
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/codecs/cs4270*
@ -1462,6 +1458,7 @@ P: Joe Eykholt
M: jeykholt@cisco.com
L: linux-scsi@vger.kernel.org
S: Supported
F: drivers/scsi/fnic/
CODA FILE SYSTEM
P: Jan Harkes
@ -1534,7 +1531,6 @@ F: drivers/usb/atm/cxacru.c
CONFIGFS
P: Joel Becker
M: joel.becker@oracle.com
L: linux-kernel@vger.kernel.org
S: Supported
F: fs/configfs/
F: include/linux/configfs.h
@ -1592,7 +1588,6 @@ F: arch/x86/kernel/msr.c
CPUSETS
P: Paul Menage
M: menage@google.com
L: linux-kernel@vger.kernel.org
W: http://www.bullopensource.org/cpuset/
W: http://oss.sgi.com/projects/cpusets/
S: Supported
@ -1799,7 +1794,6 @@ DEVICE NUMBER REGISTRY
P: Torben Mathiasen
M: device@lanana.org
W: http://lanana.org/docs/device-list/index.html
L: linux-kernel@vger.kernel.org
S: Maintained
DEVICE-MAPPER (LVM)
@ -1825,7 +1819,6 @@ F: drivers/char/digi*
DIRECTORY NOTIFICATION (DNOTIFY)
P: Eric Paris
M: eparis@parisplace.org
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/dnotify.txt
F: fs/notify/dnotify/
@ -1842,7 +1835,6 @@ S: Maintained
DISKQUOTA
P: Jan Kara
M: jack@suse.cz
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/quota.txt
F: fs/quota/
@ -1864,7 +1856,6 @@ P: Maciej Sosnowski
M: maciej.sosnowski@intel.com
P: Dan Williams
M: dan.j.williams@intel.com
L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/dma/
F: include/linux/dma*
@ -1916,7 +1907,6 @@ F: drivers/scsi/dpt/
DRIVER CORE, KOBJECTS, AND SYSFS
P: Greg Kroah-Hartman
M: gregkh@suse.de
L: linux-kernel@vger.kernel.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
F: Documentation/kobject.txt
@ -1982,8 +1972,8 @@ F: net/bridge/netfilter/ebt*.c
ECRYPT FILE SYSTEM
P: Tyler Hicks
M: tyhicks@linux.vnet.ibm.com
M: Dustin Kirkland
P: kirkland@canonical.com
P: Dustin Kirkland
M: kirkland@canonical.com
L: ecryptfs-devel@lists.launchpad.net
W: https://launchpad.net/ecryptfs
S: Supported
@ -2263,7 +2253,6 @@ F: drivers/firewire/
F: include/linux/firewire*.h
FIRMWARE LOADER (request_firmware)
L: linux-kernel@vger.kernel.org
S: Orphan
F: Documentation/firmware_class/
F: drivers/base/firmware*.c
@ -2300,7 +2289,6 @@ M: leoli@freescale.com
P: Zhang Wei
M: zw@zh-kernel.org
L: linuxppc-dev@ozlabs.org
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/dma/fsldma.*
@ -2366,7 +2354,7 @@ F: drivers/serial/ucc_uart.c
FREESCALE SOC SOUND DRIVERS
P: Timur Tabi
M: timur@freescale.com
L: alsa-devel@alsa-project.org
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
L: linuxppc-dev@ozlabs.org
S: Supported
F: sound/soc/fsl/fsl*
@ -2500,7 +2488,6 @@ F: drivers/hwmon/hdaps.c
HYPERVISOR VIRTUAL CONSOLE DRIVER
L: linuxppc-dev@ozlabs.org
L: linux-kernel@vger.kernel.org
S: Odd Fixes
F: drivers/char/hvc_*
@ -2567,7 +2554,6 @@ F: sound/parisc/harmony.*
HAYES ESP SERIAL DRIVER
P: Andrew J. Robinson
M: arobinso@nyx.net
L: linux-kernel@vger.kernel.org
W: http://www.nyx.net/~arobinso
S: Maintained
F: Documentation/serial/hayes-esp.txt
@ -2593,7 +2579,6 @@ F: include/linux/cciss_ioctl.h
HFS FILESYSTEM
P: Roman Zippel
M: zippel@linux-m68k.org
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/hfs.txt
F: fs/hfs/
@ -2633,7 +2618,6 @@ F: include/linux/hid*
HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
P: Thomas Gleixner
M: tglx@linutronix.de
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/timers/
F: kernel/hrtimer.c
@ -2772,7 +2756,6 @@ F: drivers/i2c/busses/i2c-tiny-usb.c
i386 BOOT CODE
P: H. Peter Anvin
M: hpa@zytor.com
L: Linux-Kernel@vger.kernel.org
S: Maintained
F: arch/x86/boot/
@ -2902,7 +2885,6 @@ P: Robert Love
M: rlove@rlove.org
P: Eric Paris
M: eparis@parisplace.org
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/inotify.txt
F: fs/notify/inotify/
@ -2950,7 +2932,6 @@ F: arch/x86/kernel/microcode_intel.c
INTEL I/OAT DMA DRIVER
P: Maciej Sosnowski
M: maciej.sosnowski@intel.com
L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/dma/ioat*
@ -2966,7 +2947,6 @@ F: include/linux/intel-iommu.h
INTEL IOP-ADMA DMA DRIVER
P: Dan Williams
M: dan.j.williams@intel.com
L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/dma/iop-adma.c
@ -3279,7 +3259,6 @@ M: vgoyal@redhat.com
P: Haren Myneni
M: hbabu@us.ibm.com
L: kexec@lists.infradead.org
L: linux-kernel@vger.kernel.org
W: http://lse.sourceforge.net/kdump/
S: Maintained
F: Documentation/kdump/
@ -3389,7 +3368,6 @@ KEXEC
P: Eric Biederman
M: ebiederm@xmission.com
W: http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
L: linux-kernel@vger.kernel.org
L: kexec@lists.infradead.org
S: Maintained
F: include/linux/kexec.h
@ -3406,6 +3384,14 @@ F: drivers/serial/kgdboc.c
F: include/linux/kgdb.h
F: kernel/kgdb.c
KMEMCHECK
P: Vegard Nossum
M: vegardno@ifi.uio.no
P Pekka Enberg
M: penberg@cs.helsinki.fi
L: linux-kernel@vger.kernel.org
S: Maintained
KMEMLEAK
P: Catalin Marinas
M: catalin.marinas@arm.com
@ -3419,7 +3405,6 @@ F: mm/kmemleak-test.c
KMEMTRACE
P: Eduard - Gabriel Munteanu
M: eduard.munteanu@linux360.ro
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/trace/kmemtrace.txt
F: include/trace/kmemtrace.h
@ -3434,7 +3419,6 @@ P: David S. Miller
M: davem@davemloft.net
P: Masami Hiramatsu
M: mhiramat@redhat.com
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/kprobes.txt
F: include/linux/kprobes.h
@ -3443,7 +3427,6 @@ F: kernel/kprobes.c
KS0108 LCD CONTROLLER DRIVER
P: Miguel Ojeda Sandonis
M: miguel.ojeda.sandonis@gmail.com
L: linux-kernel@vger.kernel.org
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
@ -3607,7 +3590,6 @@ P: Peter Zijlstra
M: peterz@infradead.org
P: Ingo Molnar
M: mingo@redhat.com
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
S: Maintained
F: Documentation/lockdep*.txt
@ -3659,7 +3641,6 @@ L: linux-m32r-ja@ml.linux-m32r.org (in Japanese)
W: http://www.linux-m32r.org/
S: Maintained
F: arch/m32r/
F: include/asm-m32r/
M68K ARCHITECTURE
P: Geert Uytterhoeven
@ -3743,7 +3724,6 @@ F: include/linux/mv643xx.h
MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
P: Nicolas Pitre
M: nico@cam.org
L: linux-kernel@vger.kernel.org
S: Maintained
MARVELL YUKON / SYSKONNECT DRIVER
@ -3797,7 +3777,6 @@ F: drivers/scsi/megaraid/
MEMORY MANAGEMENT
L: linux-mm@kvack.org
L: linux-kernel@vger.kernel.org
W: http://www.linux-mm.org
S: Maintained
F: include/linux/mm.h
@ -3811,7 +3790,6 @@ M: xemul@openvz.org
P: KAMEZAWA Hiroyuki
M: kamezawa.hiroyu@jp.fujitsu.com
L: linux-mm@kvack.org
L: linux-kernel@vger.kernel.org
S: Maintained
F: mm/memcontrol.c
@ -3854,7 +3832,6 @@ F: arch/mips/
MISCELLANEOUS MCA-SUPPORT
P: James Bottomley
M: James.Bottomley@HansenPartnership.com
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/ia64/mca.txt
F: Documentation/mca.txt
@ -3864,7 +3841,6 @@ F: include/linux/mca*
MODULE SUPPORT
P: Rusty Russell
M: rusty@rustcorp.com.au
L: linux-kernel@vger.kernel.org
S: Maintained
F: include/linux/module.h
F: kernel/module.c
@ -3888,7 +3864,6 @@ F: drivers/mmc/host/imxmmc.*
MOUSE AND MISC DEVICES [GENERAL]
P: Alessandro Rubini
M: rubini@ipvvis.unipv.it
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/input/mouse/
F: include/linux/gpio_mouse.h
@ -3896,7 +3871,6 @@ F: include/linux/gpio_mouse.h
MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
P: Jiri Slaby
M: jirislaby@gmail.com
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/serial/moxa-smartio
F: drivers/char/mxser.*
@ -3912,7 +3886,6 @@ F: drivers/platform/x86/msi-laptop.c
MULTIFUNCTION DEVICES (MFD)
P: Samuel Ortiz
M: sameo@linux.intel.com
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git
S: Supported
F: drivers/mfd/
@ -3920,7 +3893,6 @@ F: drivers/mfd/
MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
P: Pierre Ossman
M: pierre@ossman.eu
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/mmc/
F: include/linux/mmc/
@ -3928,7 +3900,6 @@ F: include/linux/mmc/
MULTIMEDIA CARD (MMC) ETC. OVER SPI
P: David Brownell
M: dbrownell@users.sourceforge.net
L: linux-kernel@vger.kernel.org
S: Odd Fixes
F: drivers/mmc/host/mmc_spi.c
F: include/linux/spi/mmc_spi.h
@ -3943,7 +3914,6 @@ F: sound/oss/msnd*
MULTITECH MULTIPORT CARD (ISICOM)
P: Jiri Slaby
M: jirislaby@gmail.com
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/char/isicom.c
F: include/linux/isicom.h
@ -4187,7 +4157,6 @@ NTFS FILESYSTEM
P: Anton Altaparmakov
M: aia21@cantab.net
L: linux-ntfs-dev@lists.sourceforge.net
L: linux-kernel@vger.kernel.org
W: http://www.linux-ntfs.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
S: Maintained
@ -4421,7 +4390,6 @@ M: akataria@vmware.com
P: Rusty Russell
M: rusty@rustcorp.com.au
L: virtualization@lists.osdl.org
L: linux-kernel@vger.kernel.org
S: Supported
F: Documentation/ia64/paravirt_ops.txt
F: arch/*/kernel/paravirt*
@ -4472,7 +4440,6 @@ F: include/linux/leds-pca9532.h
PCI ERROR RECOVERY
P: Linas Vepstas
M: linas@austin.ibm.com
L: linux-kernel@vger.kernel.org
L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/PCI/pci-error-recovery.txt
@ -4481,7 +4448,6 @@ F: Documentation/powerpc/eeh-pci-error-recovery.txt
PCI SUBSYSTEM
P: Jesse Barnes
M: jbarnes@virtuousgeek.org
L: linux-kernel@vger.kernel.org
L: linux-pci@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
S: Supported
@ -4516,7 +4482,6 @@ F: drivers/net/pcnet32.c
PER-TASK DELAY ACCOUNTING
P: Balbir Singh
M: balbir@linux.vnet.ibm.com
L: linux-kernel@vger.kernel.org
S: Maintained
F: include/linux/delayacct.h
F: kernel/delayacct.c
@ -4548,7 +4513,6 @@ F: drivers/mtd/devices/phram.c
PKTCDVD DRIVER
P: Peter Osterlund
M: petero2@telia.com
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/block/pktcdvd.c
F: include/linux/pktcdvd.h
@ -4556,7 +4520,6 @@ F: include/linux/pktcdvd.h
POSIX CLOCKS and TIMERS
P: Thomas Gleixner
M: tglx@linutronix.de
L: linux-kernel@vger.kernel.org
S: Supported
F: fs/timerfd.c
F: include/linux/timer*
@ -4567,7 +4530,6 @@ P: Anton Vorontsov
M: cbou@mail.ru
P: David Woodhouse
M: dwmw2@infradead.org
L: linux-kernel@vger.kernel.org
T: git git://git.infradead.org/battery-2.6.git
S: Maintained
F: include/linux/power_supply.h
@ -4619,7 +4581,6 @@ F: include/linux/if_pppol2tp.h
PREEMPTIBLE KERNEL
P: Robert Love
M: rml@tech9.net
L: linux-kernel@vger.kernel.org
L: kpreempt-tech@lists.sourceforge.net
W: ftp://ftp.kernel.org/pub/linux/kernel/people/rml/preempt-kernel
S: Supported
@ -4682,7 +4643,6 @@ P: Roland McGrath
M: roland@redhat.com
P: Oleg Nesterov
M: oleg@redhat.com
L: linux-kernel@vger.kernel.org
S: Maintained
F: include/asm-generic/syscall.h
F: include/linux/ptrace.h
@ -4768,7 +4728,6 @@ F: drivers/net/qlge/
QNX4 FILESYSTEM
P: Anders Larsen
M: al@alarsen.net
L: linux-kernel@vger.kernel.org
W: http://www.alarsen.net/linux/qnx4fs/
S: Maintained
F: fs/qnx4/
@ -4815,7 +4774,6 @@ F: drivers/char/random.c
RAPIDIO SUBSYSTEM
P: Matt Porter
M: mporter@kernel.crashing.org
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/rapidio/
@ -4829,7 +4787,8 @@ F: drivers/net/wireless/ray*
RCUTORTURE MODULE
P: Josh Triplett
M: josh@freedesktop.org
L: linux-kernel@vger.kernel.org
P: Paul E. McKenney
M: paulmck@linux.vnet.ibm.com
S: Maintained
F: Documentation/RCU/torture.txt
F: kernel/rcutorture.c
@ -4837,7 +4796,6 @@ F: kernel/rcutorture.c
RDC R-321X SoC
P: Florian Fainelli
M: florian@openwrt.org
L: linux-kernel@vger.kernel.org
S: Maintained
RDC R6040 FAST ETHERNET DRIVER
@ -4857,8 +4815,9 @@ F: net/rds/
READ-COPY UPDATE (RCU)
P: Dipankar Sarma
M: dipankar@in.ibm.com
P: Paul E. McKenney
M: paulmck@linux.vnet.ibm.com
W: http://www.rdrop.com/users/paulmck/rclock/
L: linux-kernel@vger.kernel.org
S: Supported
F: Documentation/RCU/rcu.txt
F: Documentation/RCU/rcuref.txt
@ -4869,7 +4828,6 @@ F: kernel/rcupdate.c
REAL TIME CLOCK DRIVER
P: Paul Gortmaker
M: p_gortmaker@yahoo.com
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/rtc.txt
F: drivers/rtc/
@ -5007,7 +4965,6 @@ S3C24XX SD/MMC Driver
P: Ben Dooks
M: ben-linux@fluff.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/mmc/host/s3cmci.*
@ -5033,7 +4990,6 @@ P: Ingo Molnar
M: mingo@elte.hu
P: Peter Zijlstra
M: peterz@infradead.org
L: linux-kernel@vger.kernel.org
S: Maintained
F: kernel/sched*
F: include/linux/sched.h
@ -5135,7 +5091,6 @@ F: drivers/mmc/host/sdhci.*
SECURITY SUBSYSTEM
P: James Morris
M: jmorris@namei.org
L: linux-kernel@vger.kernel.org
L: linux-security-module@vger.kernel.org (suggested Cc:)
T: git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
W: http://security.wiki.kernel.org/
@ -5154,7 +5109,6 @@ P: James Morris
M: jmorris@namei.org
P: Eric Paris
M: eparis@parisplace.org
L: linux-kernel@vger.kernel.org (kernel issues)
L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
W: http://selinuxproject.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
@ -5417,7 +5371,6 @@ F: include/linux/sony-laptop.h
SONY MEMORYSTICK CARD SUPPORT
P: Alex Dubov
M: oakad@yahoo.com
L: linux-kernel@vger.kernel.org
W: http://tifmxx.berlios.de/
S: Maintained
F: drivers/memstick/host/tifm_ms.c
@ -5427,7 +5380,7 @@ P: Jaroslav Kysela
M: perex@perex.cz
P: Takashi Iwai
M: tiwai@suse.de
L: alsa-devel@alsa-project.org (subscribers-only)
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://www.alsa-project.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
T: git git://git.alsa-project.org/alsa-kernel.git
@ -5442,7 +5395,7 @@ M: lrg@slimlogic.co.uk
P: Mark Brown
M: broonie@opensource.wolfsonmicro.com
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
L: alsa-devel@alsa-project.org (subscribers-only)
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://alsa-project.org/main/index.php/ASoC
S: Supported
F: sound/soc/
@ -5460,7 +5413,6 @@ F: arch/sparc/
SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
P: Roger Wolff
M: R.E.Wolff@BitWizard.nl
L: linux-kernel@vger.kernel.org
S: Supported
F: Documentation/serial/specialix.txt
F: drivers/char/specialix*
@ -5506,7 +5458,6 @@ F: fs/squashfs/
SRM (Alpha) environment access
P: Jan-Benedict Glaw
M: jbglaw@lug-owl.de
L: linux-kernel@vger.kernel.org
S: Maintained
F: arch/alpha/kernel/srm_env.c
@ -5521,7 +5472,6 @@ S: Maintained
STAGING SUBSYSTEM
P: Greg Kroah-Hartman
M: gregkh@suse.de
L: linux-kernel@vger.kernel.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Maintained
F: drivers/staging/
@ -5601,7 +5551,6 @@ F: include/linux/sysv_fs.h
TASKSTATS STATISTICS INTERFACE
P: Balbir Singh
M: balbir@linux.vnet.ibm.com
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/accounting/taskstats*
F: include/linux/taskstats*
@ -5694,7 +5643,6 @@ P: Kentaro Takeda
M: takedakn@nttdata.co.jp
P: Tetsuo Handa
M: penguin-kernel@I-love.SAKURA.ne.jp
L: linux-kernel@vger.kernel.org (kernel issues)
L: tomoyo-users-en@lists.sourceforge.jp (subscribers-only, for developers and users in English)
L: tomoyo-dev@lists.sourceforge.jp (subscribers-only, for developers in Japanese)
L: tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese)
@ -5746,14 +5694,17 @@ F: drivers/char/tpm/
TRIVIAL PATCHES
P: Jiri Kosina
M: trivial@kernel.org
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
S: Maintained
F: drivers/char/tty_*
F: drivers/serial/serial_core.c
F: include/linux/serial_core.h
F: include/linux/serial.h
F: include/linux/tty.h
TTY LAYER
P: Alan Cox
M: alan@lxorguk.ukuu.org.uk
L: linux-kernel@vger.kernel.org
S: Maintained
T: stgit http://zeniv.linux.org.uk/~alan/ttydev/
@ -5826,7 +5777,6 @@ F: fs/udf/
UFS FILESYSTEM
P: Evgeniy Dushistov
M: dushistov@mail.ru
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/ufs.txt
F: fs/ufs/
@ -5843,7 +5793,6 @@ F: include/linux/uwb/
UNIFORM CDROM DRIVER
P: Jens Axboe
M: axboe@kernel.dk
L: linux-kernel@vger.kernel.org
W: http://www.kernel.dk
S: Maintained
F: Documentation/cdrom/
@ -5872,7 +5821,6 @@ F: drivers/usb/class/cdc-acm.*
USB BLOCK DRIVER (UB ub)
P: Pete Zaitcev
M: zaitcev@redhat.com
L: linux-kernel@vger.kernel.org
L: linux-usb@vger.kernel.org
S: Supported
F: drivers/block/ub.c
@ -6165,6 +6113,12 @@ L: linux-wireless@vger.kernel.org
S: Maintained
F: drivers/net/wireless/rndis_wlan.c
USB XHCI DRIVER
P: Sarah Sharp
M: sarah.a.sharp@intel.com
L: linux-usb@vger.kernel.org
S: Supported
USB ZC0301 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
@ -6212,7 +6166,6 @@ P: Hans J. Koch
M: hjk@linutronix.de
P: Greg Kroah-Hartman
M: gregkh@suse.de
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/DocBook/uio-howto.tmpl
F: drivers/uio/
@ -6238,7 +6191,6 @@ F: drivers/video/uvesafb.*
VFAT/FAT/MSDOS FILESYSTEM
P: OGAWA Hirofumi
M: hirofumi@mail.parknet.co.jp
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/vfat.txt
F: fs/fat/
@ -6282,6 +6234,14 @@ F: drivers/net/macvlan.c
F: include/linux/if_*vlan.h
F: net/8021q/
VLYNQ BUS
P: Florian Fainelli
M: florian@openwrt.org
L: openwrt-devel@lists.openwrt.org
S: Maintained
F: drivers/vlynq/vlynq.c
F: include/linux/vlynq.h
VOLTAGE AND CURRENT REGULATOR FRAMEWORK
P: Liam Girdwood
M: lrg@slimlogic.co.uk
@ -6335,7 +6295,6 @@ F: drivers/hwmon/w83793.c
W83L51xD SD/MMC CARD INTERFACE DRIVER
P: Pierre Ossman
M: pierre@ossman.eu
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/mmc/host/wbsd.*
@ -6422,7 +6381,6 @@ M: mingo@redhat.com
P: H. Peter Anvin
M: hpa@zytor.com
M: x86@kernel.org
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
S: Maintained
F: Documentation/x86/
@ -6458,7 +6416,6 @@ XILINX SYSTEMACE DRIVER
P: Grant Likely
M: grant.likely@secretlab.ca
W: http://www.secretlab.ca/
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/block/xsysace.c
@ -6523,5 +6480,9 @@ F: drivers/serial/zs.*
THE REST
P: Linus Torvalds
M: torvalds@linux-foundation.org
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
S: Buried alive in reporters
F: *
F: */

View File

@ -1,10 +1,3 @@
/*
* 8253/8254 Programmable Interval Timer
*/
#ifndef _8253PIT_H
#define _8253PIT_H
#define PIT_TICK_RATE 1193180UL
#endif

View File

@ -3,30 +3,12 @@
/* Dummy header just to define km_type. */
#ifdef CONFIG_DEBUG_HIGHMEM
# define D(n) __KM_FENCE_##n ,
#else
# define D(n)
#define __WITH_KM_FENCE
#endif
enum km_type {
D(0) KM_BOUNCE_READ,
D(1) KM_SKB_SUNRPC_DATA,
D(2) KM_SKB_DATA_SOFTIRQ,
D(3) KM_USER0,
D(4) KM_USER1,
D(5) KM_BIO_SRC_IRQ,
D(6) KM_BIO_DST_IRQ,
D(7) KM_PTE0,
D(8) KM_PTE1,
D(9) KM_IRQ0,
D(10) KM_IRQ1,
D(11) KM_SOFTIRQ0,
D(12) KM_SOFTIRQ1,
D(13) KM_TYPE_NR
};
#include <asm-generic/kmap_types.h>
#undef D
#undef __WITH_KM_FENCE
#endif

View File

@ -10,10 +10,7 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
struct task_struct init_task = INIT_TASK(init_task);
EXPORT_SYMBOL(init_mm);
EXPORT_SYMBOL(init_task);
union thread_union init_thread_union

View File

@ -227,7 +227,7 @@ struct irqaction timer_irqaction = {
.name = "timer",
};
static struct hw_interrupt_type rtc_irq_type = {
static struct irq_chip rtc_irq_type = {
.typename = "RTC",
.startup = rtc_startup,
.shutdown = rtc_enable_disable,

View File

@ -83,7 +83,7 @@ i8259a_end_irq(unsigned int irq)
i8259a_enable_irq(irq);
}
struct hw_interrupt_type i8259a_irq_type = {
struct irq_chip i8259a_irq_type = {
.typename = "XT-PIC",
.startup = i8259a_startup_irq,
.shutdown = i8259a_disable_irq,

View File

@ -36,7 +36,7 @@ extern void i8259a_disable_irq(unsigned int);
extern void i8259a_mask_and_ack_irq(unsigned int);
extern unsigned int i8259a_startup_irq(unsigned int);
extern void i8259a_end_irq(unsigned int);
extern struct hw_interrupt_type i8259a_irq_type;
extern struct irq_chip i8259a_irq_type;
extern void init_i8259a_irqs(void);
extern void handle_irq(int irq);

View File

@ -70,7 +70,7 @@ pyxis_mask_and_ack_irq(unsigned int irq)
*(vulp)PYXIS_INT_MASK;
}
static struct hw_interrupt_type pyxis_irq_type = {
static struct irq_chip pyxis_irq_type = {
.typename = "PYXIS",
.startup = pyxis_startup_irq,
.shutdown = pyxis_disable_irq,

View File

@ -48,7 +48,7 @@ srm_end_irq(unsigned int irq)
}
/* Handle interrupts from the SRM, assuming no additional weirdness. */
static struct hw_interrupt_type srm_irq_type = {
static struct irq_chip srm_irq_type = {
.typename = "SRM",
.startup = srm_startup_irq,
.shutdown = srm_disable_irq,

View File

@ -252,9 +252,9 @@ reserve_std_resources(void)
}
#define PFN_MAX PFN_DOWN(0x80000000)
#define for_each_mem_cluster(memdesc, cluster, i) \
for ((cluster) = (memdesc)->cluster, (i) = 0; \
(i) < (memdesc)->numclusters; (i)++, (cluster)++)
#define for_each_mem_cluster(memdesc, _cluster, i) \
for ((_cluster) = (memdesc)->cluster, (i) = 0; \
(i) < (memdesc)->numclusters; (i)++, (_cluster)++)
static unsigned long __init
get_mem_size_limit(char *s)

View File

@ -89,7 +89,7 @@ alcor_end_irq(unsigned int irq)
alcor_enable_irq(irq);
}
static struct hw_interrupt_type alcor_irq_type = {
static struct irq_chip alcor_irq_type = {
.typename = "ALCOR",
.startup = alcor_startup_irq,
.shutdown = alcor_disable_irq,

View File

@ -71,7 +71,7 @@ cabriolet_end_irq(unsigned int irq)
cabriolet_enable_irq(irq);
}
static struct hw_interrupt_type cabriolet_irq_type = {
static struct irq_chip cabriolet_irq_type = {
.typename = "CABRIOLET",
.startup = cabriolet_startup_irq,
.shutdown = cabriolet_disable_irq,

View File

@ -198,7 +198,7 @@ clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
return 0;
}
static struct hw_interrupt_type dp264_irq_type = {
static struct irq_chip dp264_irq_type = {
.typename = "DP264",
.startup = dp264_startup_irq,
.shutdown = dp264_disable_irq,
@ -209,7 +209,7 @@ static struct hw_interrupt_type dp264_irq_type = {
.set_affinity = dp264_set_affinity,
};
static struct hw_interrupt_type clipper_irq_type = {
static struct irq_chip clipper_irq_type = {
.typename = "CLIPPER",
.startup = clipper_startup_irq,
.shutdown = clipper_disable_irq,
@ -298,7 +298,7 @@ clipper_srm_device_interrupt(unsigned long vector)
}
static void __init
init_tsunami_irqs(struct hw_interrupt_type * ops, int imin, int imax)
init_tsunami_irqs(struct irq_chip * ops, int imin, int imax)
{
long i;
for (i = imin; i <= imax; ++i) {

View File

@ -69,7 +69,7 @@ eb64p_end_irq(unsigned int irq)
eb64p_enable_irq(irq);
}
static struct hw_interrupt_type eb64p_irq_type = {
static struct irq_chip eb64p_irq_type = {
.typename = "EB64P",
.startup = eb64p_startup_irq,
.shutdown = eb64p_disable_irq,

View File

@ -80,7 +80,7 @@ eiger_end_irq(unsigned int irq)
eiger_enable_irq(irq);
}
static struct hw_interrupt_type eiger_irq_type = {
static struct irq_chip eiger_irq_type = {
.typename = "EIGER",
.startup = eiger_startup_irq,
.shutdown = eiger_disable_irq,

View File

@ -118,7 +118,7 @@ jensen_local_end(unsigned int irq)
i8259a_end_irq(1);
}
static struct hw_interrupt_type jensen_local_irq_type = {
static struct irq_chip jensen_local_irq_type = {
.typename = "LOCAL",
.startup = jensen_local_startup,
.shutdown = jensen_local_shutdown,

View File

@ -169,7 +169,7 @@ marvel_irq_noop_return(unsigned int irq)
return 0;
}
static struct hw_interrupt_type marvel_legacy_irq_type = {
static struct irq_chip marvel_legacy_irq_type = {
.typename = "LEGACY",
.startup = marvel_irq_noop_return,
.shutdown = marvel_irq_noop,
@ -179,7 +179,7 @@ static struct hw_interrupt_type marvel_legacy_irq_type = {
.end = marvel_irq_noop,
};
static struct hw_interrupt_type io7_lsi_irq_type = {
static struct irq_chip io7_lsi_irq_type = {
.typename = "LSI",
.startup = io7_startup_irq,
.shutdown = io7_disable_irq,
@ -189,7 +189,7 @@ static struct hw_interrupt_type io7_lsi_irq_type = {
.end = io7_end_irq,
};
static struct hw_interrupt_type io7_msi_irq_type = {
static struct irq_chip io7_msi_irq_type = {
.typename = "MSI",
.startup = io7_startup_irq,
.shutdown = io7_disable_irq,
@ -273,8 +273,8 @@ init_one_io7_msi(struct io7 *io7, unsigned int which, unsigned int where)
static void __init
init_io7_irqs(struct io7 *io7,
struct hw_interrupt_type *lsi_ops,
struct hw_interrupt_type *msi_ops)
struct irq_chip *lsi_ops,
struct irq_chip *msi_ops)
{
long base = (io7->pe << MARVEL_IRQ_VEC_PE_SHIFT) + 16;
long i;

View File

@ -68,7 +68,7 @@ mikasa_end_irq(unsigned int irq)
mikasa_enable_irq(irq);
}
static struct hw_interrupt_type mikasa_irq_type = {
static struct irq_chip mikasa_irq_type = {
.typename = "MIKASA",
.startup = mikasa_startup_irq,
.shutdown = mikasa_disable_irq,

View File

@ -73,7 +73,7 @@ noritake_end_irq(unsigned int irq)
noritake_enable_irq(irq);
}
static struct hw_interrupt_type noritake_irq_type = {
static struct irq_chip noritake_irq_type = {
.typename = "NORITAKE",
.startup = noritake_startup_irq,
.shutdown = noritake_disable_irq,

View File

@ -135,7 +135,7 @@ rawhide_end_irq(unsigned int irq)
rawhide_enable_irq(irq);
}
static struct hw_interrupt_type rawhide_irq_type = {
static struct irq_chip rawhide_irq_type = {
.typename = "RAWHIDE",
.startup = rawhide_startup_irq,
.shutdown = rawhide_disable_irq,

View File

@ -14,6 +14,7 @@
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/init.h>
#include <asm/ptrace.h>

View File

@ -72,7 +72,7 @@ rx164_end_irq(unsigned int irq)
rx164_enable_irq(irq);
}
static struct hw_interrupt_type rx164_irq_type = {
static struct irq_chip rx164_irq_type = {
.typename = "RX164",
.startup = rx164_startup_irq,
.shutdown = rx164_disable_irq,

View File

@ -501,7 +501,7 @@ sable_lynx_mask_and_ack_irq(unsigned int irq)
spin_unlock(&sable_lynx_irq_lock);
}
static struct hw_interrupt_type sable_lynx_irq_type = {
static struct irq_chip sable_lynx_irq_type = {
.typename = "SABLE/LYNX",
.startup = sable_lynx_startup_irq,
.shutdown = sable_lynx_disable_irq,

View File

@ -74,7 +74,7 @@ takara_end_irq(unsigned int irq)
takara_enable_irq(irq);
}
static struct hw_interrupt_type takara_irq_type = {
static struct irq_chip takara_irq_type = {
.typename = "TAKARA",
.startup = takara_startup_irq,
.shutdown = takara_disable_irq,

View File

@ -185,7 +185,7 @@ titan_srm_device_interrupt(unsigned long vector)
static void __init
init_titan_irqs(struct hw_interrupt_type * ops, int imin, int imax)
init_titan_irqs(struct irq_chip * ops, int imin, int imax)
{
long i;
for (i = imin; i <= imax; ++i) {
@ -194,7 +194,7 @@ init_titan_irqs(struct hw_interrupt_type * ops, int imin, int imax)
}
}
static struct hw_interrupt_type titan_irq_type = {
static struct irq_chip titan_irq_type = {
.typename = "TITAN",
.startup = titan_startup_irq,
.shutdown = titan_disable_irq,

View File

@ -157,7 +157,7 @@ wildfire_end_irq(unsigned int irq)
wildfire_enable_irq(irq);
}
static struct hw_interrupt_type wildfire_irq_type = {
static struct irq_chip wildfire_irq_type = {
.typename = "WILDFIRE",
.startup = wildfire_startup_irq,
.shutdown = wildfire_disable_irq,

View File

@ -28,9 +28,9 @@ EXPORT_SYMBOL(node_data);
#define DBGDCONT(args...)
#endif
#define for_each_mem_cluster(memdesc, cluster, i) \
for ((cluster) = (memdesc)->cluster, (i) = 0; \
(i) < (memdesc)->numclusters; (i)++, (cluster)++)
#define for_each_mem_cluster(memdesc, _cluster, i) \
for ((_cluster) = (memdesc)->cluster, (i) = 0; \
(i) < (memdesc)->numclusters; (i)++, (_cluster)++)
static void __init show_mem_layout(void)
{

View File

@ -14,10 +14,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
EXPORT_SYMBOL(init_mm);
/*
* Initial thread structure.
*

View File

@ -380,12 +380,12 @@ static struct pca953x_platform_data pca9536_data = {
.gpio_base = NR_BUILTIN_GPIO,
};
static int gpio_bus_switch;
static int gpio_bus_switch = -EINVAL;
static int pcm990_camera_set_bus_param(struct soc_camera_link *link,
unsigned long flags)
unsigned long flags)
{
if (gpio_bus_switch <= 0) {
if (gpio_bus_switch < 0) {
if (flags == SOCAM_DATAWIDTH_10)
return 0;
else
@ -404,25 +404,34 @@ static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link)
{
int ret;
if (!gpio_bus_switch) {
if (gpio_bus_switch < 0) {
ret = gpio_request(NR_BUILTIN_GPIO, "camera");
if (!ret) {
gpio_bus_switch = NR_BUILTIN_GPIO;
gpio_direction_output(gpio_bus_switch, 0);
} else
gpio_bus_switch = -EINVAL;
}
}
if (gpio_bus_switch > 0)
if (gpio_bus_switch >= 0)
return SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_10;
else
return SOCAM_DATAWIDTH_10;
}
static void pcm990_camera_free_bus(struct soc_camera_link *link)
{
if (gpio_bus_switch < 0)
return;
gpio_free(gpio_bus_switch);
gpio_bus_switch = -EINVAL;
}
static struct soc_camera_link iclink = {
.bus_id = 0, /* Must match with the camera ID above */
.query_bus_param = pcm990_camera_query_bus_param,
.set_bus_param = pcm990_camera_set_bus_param,
.free_bus = pcm990_camera_free_bus,
};
/* Board I2C devices. */

View File

@ -0,0 +1,50 @@
/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C - USB2.0 Highspeed/OtG device PHY registers
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* Note, this is a seperate header file as some of the clock framework
* needs to touch this if the clk_48m is used as the USB OHCI or other
* peripheral source.
*/
#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H
#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__
/* S3C64XX_PA_USB_HSPHY */
#define S3C_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
#define S3C_PHYPWR S3C_HSOTG_PHYREG(0x00)
#define SRC_PHYPWR_OTG_DISABLE (1 << 4)
#define SRC_PHYPWR_ANALOG_POWERDOWN (1 << 3)
#define SRC_PHYPWR_FORCE_SUSPEND (1 << 1)
#define S3C_PHYCLK S3C_HSOTG_PHYREG(0x04)
#define S3C_PHYCLK_MODE_USB11 (1 << 6)
#define S3C_PHYCLK_EXT_OSC (1 << 5)
#define S3C_PHYCLK_CLK_FORCE (1 << 4)
#define S3C_PHYCLK_ID_PULL (1 << 2)
#define S3C_PHYCLK_CLKSEL_MASK (0x3 << 0)
#define S3C_PHYCLK_CLKSEL_SHIFT (0)
#define S3C_PHYCLK_CLKSEL_48M (0x0 << 0)
#define S3C_PHYCLK_CLKSEL_12M (0x2 << 0)
#define S3C_PHYCLK_CLKSEL_24M (0x3 << 0)
#define S3C_RSTCON S3C_HSOTG_PHYREG(0x08)
#define S3C_RSTCON_PHYCLK (1 << 2)
#define S3C_RSTCON_HCLK (1 << 2)
#define S3C_RSTCON_PHY (1 << 0)
#define S3C_PHYTUNE S3C_HSOTG_PHYREG(0x20)
#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */

View File

@ -0,0 +1,377 @@
/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C - USB2.0 Highspeed/OtG device block registers
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_H
#define __PLAT_S3C64XX_REGS_USB_HSOTG_H __FILE__
#define S3C_HSOTG_REG(x) (x)
#define S3C_GOTGCTL S3C_HSOTG_REG(0x000)
#define S3C_GOTGCTL_BSESVLD (1 << 19)
#define S3C_GOTGCTL_ASESVLD (1 << 18)
#define S3C_GOTGCTL_DBNC_SHORT (1 << 17)
#define S3C_GOTGCTL_CONID_B (1 << 16)
#define S3C_GOTGCTL_DEVHNPEN (1 << 11)
#define S3C_GOTGCTL_HSSETHNPEN (1 << 10)
#define S3C_GOTGCTL_HNPREQ (1 << 9)
#define S3C_GOTGCTL_HSTNEGSCS (1 << 8)
#define S3C_GOTGCTL_SESREQ (1 << 1)
#define S3C_GOTGCTL_SESREQSCS (1 << 0)
#define S3C_GOTGINT S3C_HSOTG_REG(0x004)
#define S3C_GOTGINT_DbnceDone (1 << 19)
#define S3C_GOTGINT_ADevTOUTChg (1 << 18)
#define S3C_GOTGINT_HstNegDet (1 << 17)
#define S3C_GOTGINT_HstnegSucStsChng (1 << 9)
#define S3C_GOTGINT_SesReqSucStsChng (1 << 8)
#define S3C_GOTGINT_SesEndDet (1 << 2)
#define S3C_GAHBCFG S3C_HSOTG_REG(0x008)
#define S3C_GAHBCFG_PTxFEmpLvl (1 << 8)
#define S3C_GAHBCFG_NPTxFEmpLvl (1 << 7)
#define S3C_GAHBCFG_DMAEn (1 << 5)
#define S3C_GAHBCFG_HBstLen_MASK (0xf << 1)
#define S3C_GAHBCFG_HBstLen_SHIFT (1)
#define S3C_GAHBCFG_HBstLen_Single (0x0 << 1)
#define S3C_GAHBCFG_HBstLen_Incr (0x1 << 1)
#define S3C_GAHBCFG_HBstLen_Incr4 (0x3 << 1)
#define S3C_GAHBCFG_HBstLen_Incr8 (0x5 << 1)
#define S3C_GAHBCFG_HBstLen_Incr16 (0x7 << 1)
#define S3C_GAHBCFG_GlblIntrEn (1 << 0)
#define S3C_GUSBCFG S3C_HSOTG_REG(0x00C)
#define S3C_GUSBCFG_PHYLPClkSel (1 << 15)
#define S3C_GUSBCFG_HNPCap (1 << 9)
#define S3C_GUSBCFG_SRPCap (1 << 8)
#define S3C_GUSBCFG_PHYIf16 (1 << 3)
#define S3C_GUSBCFG_TOutCal_MASK (0x7 << 0)
#define S3C_GUSBCFG_TOutCal_SHIFT (0)
#define S3C_GUSBCFG_TOutCal_LIMIT (0x7)
#define S3C_GUSBCFG_TOutCal(_x) ((_x) << 0)
#define S3C_GRSTCTL S3C_HSOTG_REG(0x010)
#define S3C_GRSTCTL_AHBIdle (1 << 31)
#define S3C_GRSTCTL_DMAReq (1 << 30)
#define S3C_GRSTCTL_TxFNum_MASK (0x1f << 6)
#define S3C_GRSTCTL_TxFNum_SHIFT (6)
#define S3C_GRSTCTL_TxFNum_LIMIT (0x1f)
#define S3C_GRSTCTL_TxFNum(_x) ((_x) << 6)
#define S3C_GRSTCTL_TxFFlsh (1 << 5)
#define S3C_GRSTCTL_RxFFlsh (1 << 4)
#define S3C_GRSTCTL_INTknQFlsh (1 << 3)
#define S3C_GRSTCTL_FrmCntrRst (1 << 2)
#define S3C_GRSTCTL_HSftRst (1 << 1)
#define S3C_GRSTCTL_CSftRst (1 << 0)
#define S3C_GINTSTS S3C_HSOTG_REG(0x014)
#define S3C_GINTMSK S3C_HSOTG_REG(0x018)
#define S3C_GINTSTS_WkUpInt (1 << 31)
#define S3C_GINTSTS_SessReqInt (1 << 30)
#define S3C_GINTSTS_DisconnInt (1 << 29)
#define S3C_GINTSTS_ConIDStsChng (1 << 28)
#define S3C_GINTSTS_PTxFEmp (1 << 26)
#define S3C_GINTSTS_HChInt (1 << 25)
#define S3C_GINTSTS_PrtInt (1 << 24)
#define S3C_GINTSTS_FetSusp (1 << 22)
#define S3C_GINTSTS_incompIP (1 << 21)
#define S3C_GINTSTS_IncomplSOIN (1 << 20)
#define S3C_GINTSTS_OEPInt (1 << 19)
#define S3C_GINTSTS_IEPInt (1 << 18)
#define S3C_GINTSTS_EPMis (1 << 17)
#define S3C_GINTSTS_EOPF (1 << 15)
#define S3C_GINTSTS_ISOutDrop (1 << 14)
#define S3C_GINTSTS_EnumDone (1 << 13)
#define S3C_GINTSTS_USBRst (1 << 12)
#define S3C_GINTSTS_USBSusp (1 << 11)
#define S3C_GINTSTS_ErlySusp (1 << 10)
#define S3C_GINTSTS_GOUTNakEff (1 << 7)
#define S3C_GINTSTS_GINNakEff (1 << 6)
#define S3C_GINTSTS_NPTxFEmp (1 << 5)
#define S3C_GINTSTS_RxFLvl (1 << 4)
#define S3C_GINTSTS_SOF (1 << 3)
#define S3C_GINTSTS_OTGInt (1 << 2)
#define S3C_GINTSTS_ModeMis (1 << 1)
#define S3C_GINTSTS_CurMod_Host (1 << 0)
#define S3C_GRXSTSR S3C_HSOTG_REG(0x01C)
#define S3C_GRXSTSP S3C_HSOTG_REG(0x020)
#define S3C_GRXSTS_FN_MASK (0x7f << 25)
#define S3C_GRXSTS_FN_SHIFT (25)
#define S3C_GRXSTS_PktSts_MASK (0xf << 17)
#define S3C_GRXSTS_PktSts_SHIFT (17)
#define S3C_GRXSTS_PktSts_GlobalOutNAK (0x1 << 17)
#define S3C_GRXSTS_PktSts_OutRX (0x2 << 17)
#define S3C_GRXSTS_PktSts_OutDone (0x3 << 17)
#define S3C_GRXSTS_PktSts_SetupDone (0x4 << 17)
#define S3C_GRXSTS_PktSts_SetupRX (0x6 << 17)
#define S3C_GRXSTS_DPID_MASK (0x3 << 15)
#define S3C_GRXSTS_DPID_SHIFT (15)
#define S3C_GRXSTS_ByteCnt_MASK (0x7ff << 4)
#define S3C_GRXSTS_ByteCnt_SHIFT (4)
#define S3C_GRXSTS_EPNum_MASK (0xf << 0)
#define S3C_GRXSTS_EPNum_SHIFT (0)
#define S3C_GRXFSIZ S3C_HSOTG_REG(0x024)
#define S3C_GNPTXFSIZ S3C_HSOTG_REG(0x028)
#define S3C_GNPTXFSIZ_NPTxFDep_MASK (0xffff << 16)
#define S3C_GNPTXFSIZ_NPTxFDep_SHIFT (16)
#define S3C_GNPTXFSIZ_NPTxFDep_LIMIT (0xffff)
#define S3C_GNPTXFSIZ_NPTxFDep(_x) ((_x) << 16)
#define S3C_GNPTXFSIZ_NPTxFStAddr_MASK (0xffff << 0)
#define S3C_GNPTXFSIZ_NPTxFStAddr_SHIFT (0)
#define S3C_GNPTXFSIZ_NPTxFStAddr_LIMIT (0xffff)
#define S3C_GNPTXFSIZ_NPTxFStAddr(_x) ((_x) << 0)
#define S3C_GNPTXSTS S3C_HSOTG_REG(0x02C)
#define S3C_GNPTXSTS_NPtxQTop_MASK (0x7f << 24)
#define S3C_GNPTXSTS_NPtxQTop_SHIFT (24)
#define S3C_GNPTXSTS_NPTxQSpcAvail_MASK (0xff << 16)
#define S3C_GNPTXSTS_NPTxQSpcAvail_SHIFT (16)
#define S3C_GNPTXSTS_NPTxQSpcAvail_GET(_v) (((_v) >> 16) & 0xff)
#define S3C_GNPTXSTS_NPTxFSpcAvail_MASK (0xffff << 0)
#define S3C_GNPTXSTS_NPTxFSpcAvail_SHIFT (0)
#define S3C_GNPTXSTS_NPTxFSpcAvail_GET(_v) (((_v) >> 0) & 0xffff)
#define S3C_HPTXFSIZ S3C_HSOTG_REG(0x100)
#define S3C_DPTXFSIZn(_a) S3C_HSOTG_REG(0x104 + (((_a) - 1) * 4))
#define S3C_DPTXFSIZn_DPTxFSize_MASK (0xffff << 16)
#define S3C_DPTXFSIZn_DPTxFSize_SHIFT (16)
#define S3C_DPTXFSIZn_DPTxFSize_GET(_v) (((_v) >> 16) & 0xffff)
#define S3C_DPTXFSIZn_DPTxFSize_LIMIT (0xffff)
#define S3C_DPTXFSIZn_DPTxFSize(_x) ((_x) << 16)
#define S3C_DPTXFSIZn_DPTxFStAddr_MASK (0xffff << 0)
#define S3C_DPTXFSIZn_DPTxFStAddr_SHIFT (0)
/* Device mode registers */
#define S3C_DCFG S3C_HSOTG_REG(0x800)
#define S3C_DCFG_EPMisCnt_MASK (0x1f << 18)
#define S3C_DCFG_EPMisCnt_SHIFT (18)
#define S3C_DCFG_EPMisCnt_LIMIT (0x1f)
#define S3C_DCFG_EPMisCnt(_x) ((_x) << 18)
#define S3C_DCFG_PerFrInt_MASK (0x3 << 11)
#define S3C_DCFG_PerFrInt_SHIFT (11)
#define S3C_DCFG_PerFrInt_LIMIT (0x3)
#define S3C_DCFG_PerFrInt(_x) ((_x) << 11)
#define S3C_DCFG_DevAddr_MASK (0x7f << 4)
#define S3C_DCFG_DevAddr_SHIFT (4)
#define S3C_DCFG_DevAddr_LIMIT (0x7f)
#define S3C_DCFG_DevAddr(_x) ((_x) << 4)
#define S3C_DCFG_NZStsOUTHShk (1 << 2)
#define S3C_DCFG_DevSpd_MASK (0x3 << 0)
#define S3C_DCFG_DevSpd_SHIFT (0)
#define S3C_DCFG_DevSpd_HS (0x0 << 0)
#define S3C_DCFG_DevSpd_FS (0x1 << 0)
#define S3C_DCFG_DevSpd_LS (0x2 << 0)
#define S3C_DCFG_DevSpd_FS48 (0x3 << 0)
#define S3C_DCTL S3C_HSOTG_REG(0x804)
#define S3C_DCTL_PWROnPrgDone (1 << 11)
#define S3C_DCTL_CGOUTNak (1 << 10)
#define S3C_DCTL_SGOUTNak (1 << 9)
#define S3C_DCTL_CGNPInNAK (1 << 8)
#define S3C_DCTL_SGNPInNAK (1 << 7)
#define S3C_DCTL_TstCtl_MASK (0x7 << 4)
#define S3C_DCTL_TstCtl_SHIFT (4)
#define S3C_DCTL_GOUTNakSts (1 << 3)
#define S3C_DCTL_GNPINNakSts (1 << 2)
#define S3C_DCTL_SftDiscon (1 << 1)
#define S3C_DCTL_RmtWkUpSig (1 << 0)
#define S3C_DSTS S3C_HSOTG_REG(0x808)
#define S3C_DSTS_SOFFN_MASK (0x3fff << 8)
#define S3C_DSTS_SOFFN_SHIFT (8)
#define S3C_DSTS_SOFFN_LIMIT (0x3fff)
#define S3C_DSTS_SOFFN(_x) ((_x) << 8)
#define S3C_DSTS_ErraticErr (1 << 3)
#define S3C_DSTS_EnumSpd_MASK (0x3 << 1)
#define S3C_DSTS_EnumSpd_SHIFT (1)
#define S3C_DSTS_EnumSpd_HS (0x0 << 1)
#define S3C_DSTS_EnumSpd_FS (0x1 << 1)
#define S3C_DSTS_EnumSpd_LS (0x2 << 1)
#define S3C_DSTS_EnumSpd_FS48 (0x3 << 1)
#define S3C_DSTS_SuspSts (1 << 0)
#define S3C_DIEPMSK S3C_HSOTG_REG(0x810)
#define S3C_DIEPMSK_INEPNakEffMsk (1 << 6)
#define S3C_DIEPMSK_INTknEPMisMsk (1 << 5)
#define S3C_DIEPMSK_INTknTXFEmpMsk (1 << 4)
#define S3C_DIEPMSK_TimeOUTMsk (1 << 3)
#define S3C_DIEPMSK_AHBErrMsk (1 << 2)
#define S3C_DIEPMSK_EPDisbldMsk (1 << 1)
#define S3C_DIEPMSK_XferComplMsk (1 << 0)
#define S3C_DOEPMSK S3C_HSOTG_REG(0x814)
#define S3C_DOEPMSK_Back2BackSetup (1 << 6)
#define S3C_DOEPMSK_OUTTknEPdisMsk (1 << 4)
#define S3C_DOEPMSK_SetupMsk (1 << 3)
#define S3C_DOEPMSK_AHBErrMsk (1 << 2)
#define S3C_DOEPMSK_EPDisbldMsk (1 << 1)
#define S3C_DOEPMSK_XferComplMsk (1 << 0)
#define S3C_DAINT S3C_HSOTG_REG(0x818)
#define S3C_DAINTMSK S3C_HSOTG_REG(0x81C)
#define S3C_DAINT_OutEP_SHIFT (16)
#define S3C_DAINT_OutEP(x) (1 << ((x) + 16))
#define S3C_DAINT_InEP(x) (1 << (x))
#define S3C_DTKNQR1 S3C_HSOTG_REG(0x820)
#define S3C_DTKNQR2 S3C_HSOTG_REG(0x824)
#define S3C_DTKNQR3 S3C_HSOTG_REG(0x830)
#define S3C_DTKNQR4 S3C_HSOTG_REG(0x834)
#define S3C_DVBUSDIS S3C_HSOTG_REG(0x828)
#define S3C_DVBUSPULSE S3C_HSOTG_REG(0x82C)
#define S3C_DIEPCTL0 S3C_HSOTG_REG(0x900)
#define S3C_DOEPCTL0 S3C_HSOTG_REG(0xB00)
#define S3C_DIEPCTL(_a) S3C_HSOTG_REG(0x900 + ((_a) * 0x20))
#define S3C_DOEPCTL(_a) S3C_HSOTG_REG(0xB00 + ((_a) * 0x20))
/* EP0 specialness:
* bits[29..28] - reserved (no SetD0PID, SetD1PID)
* bits[25..22] - should always be zero, this isn't a periodic endpoint
* bits[10..0] - MPS setting differenct for EP0
*/
#define S3C_D0EPCTL_MPS_MASK (0x3 << 0)
#define S3C_D0EPCTL_MPS_SHIFT (0)
#define S3C_D0EPCTL_MPS_64 (0x0 << 0)
#define S3C_D0EPCTL_MPS_32 (0x1 << 0)
#define S3C_D0EPCTL_MPS_16 (0x2 << 0)
#define S3C_D0EPCTL_MPS_8 (0x3 << 0)
#define S3C_DxEPCTL_EPEna (1 << 31)
#define S3C_DxEPCTL_EPDis (1 << 30)
#define S3C_DxEPCTL_SetD1PID (1 << 29)
#define S3C_DxEPCTL_SetOddFr (1 << 29)
#define S3C_DxEPCTL_SetD0PID (1 << 28)
#define S3C_DxEPCTL_SetEvenFr (1 << 28)
#define S3C_DxEPCTL_SNAK (1 << 27)
#define S3C_DxEPCTL_CNAK (1 << 26)
#define S3C_DxEPCTL_TxFNum_MASK (0xf << 22)
#define S3C_DxEPCTL_TxFNum_SHIFT (22)
#define S3C_DxEPCTL_TxFNum_LIMIT (0xf)
#define S3C_DxEPCTL_TxFNum(_x) ((_x) << 22)
#define S3C_DxEPCTL_Stall (1 << 21)
#define S3C_DxEPCTL_Snp (1 << 20)
#define S3C_DxEPCTL_EPType_MASK (0x3 << 18)
#define S3C_DxEPCTL_EPType_SHIFT (18)
#define S3C_DxEPCTL_EPType_Control (0x0 << 18)
#define S3C_DxEPCTL_EPType_Iso (0x1 << 18)
#define S3C_DxEPCTL_EPType_Bulk (0x2 << 18)
#define S3C_DxEPCTL_EPType_Intterupt (0x3 << 18)
#define S3C_DxEPCTL_NAKsts (1 << 17)
#define S3C_DxEPCTL_DPID (1 << 16)
#define S3C_DxEPCTL_EOFrNum (1 << 16)
#define S3C_DxEPCTL_USBActEp (1 << 15)
#define S3C_DxEPCTL_NextEp_MASK (0xf << 11)
#define S3C_DxEPCTL_NextEp_SHIFT (11)
#define S3C_DxEPCTL_NextEp_LIMIT (0xf)
#define S3C_DxEPCTL_NextEp(_x) ((_x) << 11)
#define S3C_DxEPCTL_MPS_MASK (0x7ff << 0)
#define S3C_DxEPCTL_MPS_SHIFT (0)
#define S3C_DxEPCTL_MPS_LIMIT (0x7ff)
#define S3C_DxEPCTL_MPS(_x) ((_x) << 0)
#define S3C_DIEPINT(_a) S3C_HSOTG_REG(0x908 + ((_a) * 0x20))
#define S3C_DOEPINT(_a) S3C_HSOTG_REG(0xB08 + ((_a) * 0x20))
#define S3C_DxEPINT_INEPNakEff (1 << 6)
#define S3C_DxEPINT_Back2BackSetup (1 << 6)
#define S3C_DxEPINT_INTknEPMis (1 << 5)
#define S3C_DxEPINT_INTknTXFEmp (1 << 4)
#define S3C_DxEPINT_OUTTknEPdis (1 << 4)
#define S3C_DxEPINT_Timeout (1 << 3)
#define S3C_DxEPINT_Setup (1 << 3)
#define S3C_DxEPINT_AHBErr (1 << 2)
#define S3C_DxEPINT_EPDisbld (1 << 1)
#define S3C_DxEPINT_XferCompl (1 << 0)
#define S3C_DIEPTSIZ0 S3C_HSOTG_REG(0x910)
#define S3C_DIEPTSIZ0_PktCnt_MASK (0x3 << 19)
#define S3C_DIEPTSIZ0_PktCnt_SHIFT (19)
#define S3C_DIEPTSIZ0_PktCnt_LIMIT (0x3)
#define S3C_DIEPTSIZ0_PktCnt(_x) ((_x) << 19)
#define S3C_DIEPTSIZ0_XferSize_MASK (0x7f << 0)
#define S3C_DIEPTSIZ0_XferSize_SHIFT (0)
#define S3C_DIEPTSIZ0_XferSize_LIMIT (0x7f)
#define S3C_DIEPTSIZ0_XferSize(_x) ((_x) << 0)
#define DOEPTSIZ0 S3C_HSOTG_REG(0xB10)
#define S3C_DOEPTSIZ0_SUPCnt_MASK (0x3 << 29)
#define S3C_DOEPTSIZ0_SUPCnt_SHIFT (29)
#define S3C_DOEPTSIZ0_SUPCnt_LIMIT (0x3)
#define S3C_DOEPTSIZ0_SUPCnt(_x) ((_x) << 29)
#define S3C_DOEPTSIZ0_PktCnt (1 << 19)
#define S3C_DOEPTSIZ0_XferSize_MASK (0x7f << 0)
#define S3C_DOEPTSIZ0_XferSize_SHIFT (0)
#define S3C_DIEPTSIZ(_a) S3C_HSOTG_REG(0x910 + ((_a) * 0x20))
#define S3C_DOEPTSIZ(_a) S3C_HSOTG_REG(0xB10 + ((_a) * 0x20))
#define S3C_DxEPTSIZ_MC_MASK (0x3 << 29)
#define S3C_DxEPTSIZ_MC_SHIFT (29)
#define S3C_DxEPTSIZ_MC_LIMIT (0x3)
#define S3C_DxEPTSIZ_MC(_x) ((_x) << 29)
#define S3C_DxEPTSIZ_PktCnt_MASK (0x3ff << 19)
#define S3C_DxEPTSIZ_PktCnt_SHIFT (19)
#define S3C_DxEPTSIZ_PktCnt_GET(_v) (((_v) >> 19) & 0x3ff)
#define S3C_DxEPTSIZ_PktCnt_LIMIT (0x3ff)
#define S3C_DxEPTSIZ_PktCnt(_x) ((_x) << 19)
#define S3C_DxEPTSIZ_XferSize_MASK (0x7ffff << 0)
#define S3C_DxEPTSIZ_XferSize_SHIFT (0)
#define S3C_DxEPTSIZ_XferSize_GET(_v) (((_v) >> 0) & 0x7ffff)
#define S3C_DxEPTSIZ_XferSize_LIMIT (0x7ffff)
#define S3C_DxEPTSIZ_XferSize(_x) ((_x) << 0)
#define S3C_DIEPDMA(_a) S3C_HSOTG_REG(0x914 + ((_a) * 0x20))
#define S3C_DOEPDMA(_a) S3C_HSOTG_REG(0xB14 + ((_a) * 0x20))
#define S3C_EPFIFO(_a) S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000))
#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_H */

View File

@ -15,10 +15,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
EXPORT_SYMBOL(init_mm);
/*
* Initial thread structure. Must be aligned on an 8192-byte boundary.
*/

View File

@ -1,21 +1,6 @@
#ifndef _ASM_KMAP_TYPES_H
#define _ASM_KMAP_TYPES_H
enum km_type {
KM_BOUNCE_READ,
KM_SKB_SUNRPC_DATA,
KM_SKB_DATA_SOFTIRQ,
KM_USER0,
KM_USER1,
KM_BIO_SRC_IRQ,
KM_BIO_DST_IRQ,
KM_PTE0,
KM_PTE1,
KM_IRQ0,
KM_IRQ1,
KM_SOFTIRQ0,
KM_SOFTIRQ1,
KM_TYPE_NR
};
#include <asm-generic/kmap_types.h>
#endif

View File

@ -35,10 +35,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
EXPORT_SYMBOL(init_mm);
/*
* Initial task structure.
*

View File

@ -5,21 +5,6 @@
* is actually used on cris.
*/
enum km_type {
KM_BOUNCE_READ,
KM_SKB_SUNRPC_DATA,
KM_SKB_DATA_SOFTIRQ,
KM_USER0,
KM_USER1,
KM_BIO_SRC_IRQ,
KM_BIO_DST_IRQ,
KM_PTE0,
KM_PTE1,
KM_IRQ0,
KM_IRQ1,
KM_SOFTIRQ0,
KM_SOFTIRQ1,
KM_TYPE_NR
};
#include <asm-generic/kmap_types.h>
#endif

View File

@ -38,10 +38,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
EXPORT_SYMBOL(init_mm);
/*
* Initial thread structure.
*

View File

@ -12,10 +12,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
EXPORT_SYMBOL(init_mm);
/*
* Initial thread structure.
*

View File

@ -1,21 +1,6 @@
#ifndef _ASM_H8300_KMAP_TYPES_H
#define _ASM_H8300_KMAP_TYPES_H
enum km_type {
KM_BOUNCE_READ,
KM_SKB_SUNRPC_DATA,
KM_SKB_DATA_SOFTIRQ,
KM_USER0,
KM_USER1,
KM_BIO_SRC_IRQ,
KM_BIO_DST_IRQ,
KM_PTE0,
KM_PTE1,
KM_IRQ0,
KM_IRQ1,
KM_SOFTIRQ0,
KM_SOFTIRQ1,
KM_TYPE_NR
};
#include <asm-generic/kmap_types.h>
#endif

View File

@ -14,10 +14,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
EXPORT_SYMBOL(init_mm);
/*
* Initial task structure.
*

View File

@ -1131,7 +1131,7 @@ sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp
#ifdef CONFIG_NUMA
{
struct page *page;
page = alloc_pages_node(ioc->node == MAX_NUMNODES ?
page = alloc_pages_exact_node(ioc->node == MAX_NUMNODES ?
numa_node_id() : ioc->node, flags,
get_order(size));

View File

@ -1,30 +1,12 @@
#ifndef _ASM_IA64_KMAP_TYPES_H
#define _ASM_IA64_KMAP_TYPES_H
#ifdef CONFIG_DEBUG_HIGHMEM
# define D(n) __KM_FENCE_##n ,
#else
# define D(n)
#define __WITH_KM_FENCE
#endif
enum km_type {
D(0) KM_BOUNCE_READ,
D(1) KM_SKB_SUNRPC_DATA,
D(2) KM_SKB_DATA_SOFTIRQ,
D(3) KM_USER0,
D(4) KM_USER1,
D(5) KM_BIO_SRC_IRQ,
D(6) KM_BIO_DST_IRQ,
D(7) KM_PTE0,
D(8) KM_PTE1,
D(9) KM_IRQ0,
D(10) KM_IRQ1,
D(11) KM_SOFTIRQ0,
D(12) KM_SOFTIRQ1,
D(13) KM_TYPE_NR
};
#include <asm-generic/kmap_types.h>
#undef D
#undef __WITH_KM_FENCE
#endif /* _ASM_IA64_KMAP_TYPES_H */

View File

@ -19,10 +19,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
EXPORT_SYMBOL(init_mm);
/*
* Initial task structure.
*

View File

@ -1829,8 +1829,7 @@ ia64_mca_cpu_init(void *cpu_data)
data = mca_bootmem();
first_time = 0;
} else
data = page_address(alloc_pages_node(numa_node_id(),
GFP_KERNEL, get_order(sz)));
data = __get_free_pages(GFP_KERNEL, get_order(sz));
if (!data)
panic("Could not allocate MCA memory for cpu %d\n",
cpu);

View File

@ -5595,7 +5595,7 @@ pfm_interrupt_handler(int irq, void *arg)
(*pfm_alt_intr_handler->handler)(irq, arg, regs);
}
put_cpu_no_resched();
put_cpu();
return IRQ_HANDLED;
}

View File

@ -98,7 +98,8 @@ static int uncached_add_chunk(struct uncached_pool *uc_pool, int nid)
/* attempt to allocate a granule's worth of cached memory pages */
page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
page = alloc_pages_exact_node(nid,
GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
IA64_GRANULE_SHIFT-PAGE_SHIFT);
if (!page) {
mutex_unlock(&uc_pool->add_chunk_mutex);

View File

@ -90,7 +90,8 @@ static void *sn_dma_alloc_coherent(struct device *dev, size_t size,
*/
node = pcibus_to_node(pdev->bus);
if (likely(node >=0)) {
struct page *p = alloc_pages_node(node, flags, get_order(size));
struct page *p = alloc_pages_exact_node(node,
flags, get_order(size));
if (likely(p))
cpuaddr = page_address(p);

View File

@ -2,28 +2,11 @@
#define __M32R_KMAP_TYPES_H
#ifdef CONFIG_DEBUG_HIGHMEM
# define D(n) __KM_FENCE_##n ,
#else
# define D(n)
#define __WITH_KM_FENCE
#endif
enum km_type {
D(0) KM_BOUNCE_READ,
D(1) KM_SKB_SUNRPC_DATA,
D(2) KM_SKB_DATA_SOFTIRQ,
D(3) KM_USER0,
D(4) KM_USER1,
D(5) KM_BIO_SRC_IRQ,
D(6) KM_BIO_DST_IRQ,
D(7) KM_PTE0,
D(8) KM_PTE1,
D(9) KM_IRQ0,
D(10) KM_IRQ1,
D(11) KM_SOFTIRQ0,
D(12) KM_SOFTIRQ1,
D(13) KM_TYPE_NR
};
#include <asm-generic/kmap_types.h>
#undef D
#undef __WITH_KM_FENCE
#endif /* __M32R_KMAP_TYPES_H */

View File

@ -13,10 +13,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
EXPORT_SYMBOL(init_mm);
/*
* Initial thread structure.
*

View File

@ -154,9 +154,9 @@ unsigned long __init zone_sizes_init(void)
* Use all area of internal RAM.
* see __alloc_pages()
*/
NODE_DATA(1)->node_zones->pages_min = 0;
NODE_DATA(1)->node_zones->pages_low = 0;
NODE_DATA(1)->node_zones->pages_high = 0;
NODE_DATA(1)->node_zones->watermark[WMARK_MIN] = 0;
NODE_DATA(1)->node_zones->watermark[WMARK_LOW] = 0;
NODE_DATA(1)->node_zones->watermark[WMARK_HIGH] = 0;
return holes;
}

View File

@ -63,7 +63,7 @@ static void shutdown_m32104ut_irq(unsigned int irq)
outl(M32R_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type m32104ut_irq_type =
static struct irq_chip m32104ut_irq_type =
{
.typename = "M32104UT-IRQ",
.startup = startup_m32104ut_irq,

View File

@ -69,7 +69,7 @@ static void shutdown_m32700ut_irq(unsigned int irq)
outl(M32R_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type m32700ut_irq_type =
static struct irq_chip m32700ut_irq_type =
{
.typename = "M32700UT-IRQ",
.startup = startup_m32700ut_irq,
@ -146,7 +146,7 @@ static void shutdown_m32700ut_pld_irq(unsigned int irq)
outw(PLD_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type m32700ut_pld_irq_type =
static struct irq_chip m32700ut_pld_irq_type =
{
.typename = "M32700UT-PLD-IRQ",
.startup = startup_m32700ut_pld_irq,
@ -215,7 +215,7 @@ static void shutdown_m32700ut_lanpld_irq(unsigned int irq)
outw(PLD_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type m32700ut_lanpld_irq_type =
static struct irq_chip m32700ut_lanpld_irq_type =
{
.typename = "M32700UT-PLD-LAN-IRQ",
.startup = startup_m32700ut_lanpld_irq,
@ -284,7 +284,7 @@ static void shutdown_m32700ut_lcdpld_irq(unsigned int irq)
outw(PLD_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type m32700ut_lcdpld_irq_type =
static struct irq_chip m32700ut_lcdpld_irq_type =
{
.typename = "M32700UT-PLD-LCD-IRQ",
.startup = startup_m32700ut_lcdpld_irq,

View File

@ -63,7 +63,7 @@ static void shutdown_mappi_irq(unsigned int irq)
outl(M32R_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type mappi_irq_type =
static struct irq_chip mappi_irq_type =
{
.typename = "MAPPI-IRQ",
.startup = startup_mappi_irq,

View File

@ -70,7 +70,7 @@ static void shutdown_mappi2_irq(unsigned int irq)
outl(M32R_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type mappi2_irq_type =
static struct irq_chip mappi2_irq_type =
{
.typename = "MAPPI2-IRQ",
.startup = startup_mappi2_irq,

View File

@ -70,7 +70,7 @@ static void shutdown_mappi3_irq(unsigned int irq)
outl(M32R_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type mappi3_irq_type =
static struct irq_chip mappi3_irq_type =
{
.typename = "MAPPI3-IRQ",
.startup = startup_mappi3_irq,

View File

@ -61,7 +61,7 @@ static void shutdown_oaks32r_irq(unsigned int irq)
outl(M32R_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type oaks32r_irq_type =
static struct irq_chip oaks32r_irq_type =
{
.typename = "OAKS32R-IRQ",
.startup = startup_oaks32r_irq,

View File

@ -70,7 +70,7 @@ static void shutdown_opsput_irq(unsigned int irq)
outl(M32R_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type opsput_irq_type =
static struct irq_chip opsput_irq_type =
{
.typename = "OPSPUT-IRQ",
.startup = startup_opsput_irq,
@ -147,7 +147,7 @@ static void shutdown_opsput_pld_irq(unsigned int irq)
outw(PLD_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type opsput_pld_irq_type =
static struct irq_chip opsput_pld_irq_type =
{
.typename = "OPSPUT-PLD-IRQ",
.startup = startup_opsput_pld_irq,
@ -216,7 +216,7 @@ static void shutdown_opsput_lanpld_irq(unsigned int irq)
outw(PLD_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type opsput_lanpld_irq_type =
static struct irq_chip opsput_lanpld_irq_type =
{
.typename = "OPSPUT-PLD-LAN-IRQ",
.startup = startup_opsput_lanpld_irq,
@ -285,7 +285,7 @@ static void shutdown_opsput_lcdpld_irq(unsigned int irq)
outw(PLD_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type opsput_lcdpld_irq_type =
static struct irq_chip opsput_lcdpld_irq_type =
{
"OPSPUT-PLD-LCD-IRQ",
startup_opsput_lcdpld_irq,

View File

@ -61,7 +61,7 @@ static void shutdown_mappi_irq(unsigned int irq)
outl(M32R_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type mappi_irq_type =
static struct irq_chip mappi_irq_type =
{
.typename = "M32700-IRQ",
.startup = startup_mappi_irq,
@ -134,7 +134,7 @@ static void shutdown_m32700ut_pld_irq(unsigned int irq)
outw(PLD_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type m32700ut_pld_irq_type =
static struct irq_chip m32700ut_pld_irq_type =
{
.typename = "USRV-PLD-IRQ",
.startup = startup_m32700ut_pld_irq,

View File

@ -1,21 +1,6 @@
#ifndef __ASM_M68K_KMAP_TYPES_H
#define __ASM_M68K_KMAP_TYPES_H
enum km_type {
KM_BOUNCE_READ,
KM_SKB_SUNRPC_DATA,
KM_SKB_DATA_SOFTIRQ,
KM_USER0,
KM_USER1,
KM_BIO_SRC_IRQ,
KM_BIO_DST_IRQ,
KM_PTE0,
KM_PTE1,
KM_IRQ0,
KM_IRQ1,
KM_SOFTIRQ0,
KM_SOFTIRQ1,
KM_TYPE_NR
};
#include <asm-generic/kmap_types.h>
#endif /* __ASM_M68K_KMAP_TYPES_H */

View File

@ -42,10 +42,6 @@
*/
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
EXPORT_SYMBOL(init_mm);
union thread_union init_thread_union
__attribute__((section(".data.init_task"), aligned(THREAD_SIZE)))
= { INIT_THREAD_INFO(init_task) };

View File

@ -14,10 +14,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
EXPORT_SYMBOL(init_mm);
/*
* Initial task structure.
*

View File

@ -1,29 +1,6 @@
/*
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#ifndef _ASM_MICROBLAZE_KMAP_TYPES_H
#define _ASM_MICROBLAZE_KMAP_TYPES_H
enum km_type {
KM_BOUNCE_READ,
KM_SKB_SUNRPC_DATA,
KM_SKB_DATA_SOFTIRQ,
KM_USER0,
KM_USER1,
KM_BIO_SRC_IRQ,
KM_BIO_DST_IRQ,
KM_PTE0,
KM_PTE1,
KM_IRQ0,
KM_IRQ1,
KM_SOFTIRQ0,
KM_SOFTIRQ1,
KM_TYPE_NR,
};
#include <asm-generic/kmap_types.h>
#endif /* _ASM_MICROBLAZE_KMAP_TYPES_H */

View File

@ -618,6 +618,8 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
select SYS_HAS_EARLY_PRINTK
select SYS_HAS_CPU_CAVIUM_OCTEON
select SWAP_IO_SPACE
select HW_HAS_PCI
select ARCH_SUPPORTS_MSI
help
This option supports all of the Octeon reference boards from Cavium
Networks. It builds a kernel that dynamically determines the Octeon
@ -851,6 +853,11 @@ config SYS_SUPPORTS_BIG_ENDIAN
config SYS_SUPPORTS_LITTLE_ENDIAN
bool
config SYS_SUPPORTS_HUGETLBFS
bool
depends on CPU_SUPPORTS_HUGEPAGES && 64BIT
default y
config IRQ_CPU
bool
@ -1055,6 +1062,7 @@ config CPU_MIPS64_R1
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
help
Choose this option to build a kernel for release 1 or later of the
MIPS64 architecture. Many modern embedded systems with a 64-bit
@ -1074,6 +1082,7 @@ config CPU_MIPS64_R2
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
help
Choose this option to build a kernel for release 2 or later of the
MIPS64 architecture. Many modern embedded systems with a 64-bit
@ -1160,6 +1169,7 @@ config CPU_R5500
select CPU_HAS_LLSC
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
help
NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
instruction set.
@ -1245,6 +1255,7 @@ config CPU_CAVIUM_OCTEON
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
help
The Cavium Octeon processor is a highly integrated chip containing
many ethernet hardware widgets for networking tasks. The processor
@ -1364,6 +1375,8 @@ config CPU_SUPPORTS_32BIT_KERNEL
bool
config CPU_SUPPORTS_64BIT_KERNEL
bool
config CPU_SUPPORTS_HUGEPAGES
bool
#
# Set to y for ptrace access to watch registers.
@ -2121,6 +2134,10 @@ endmenu
menu "Power management options"
config ARCH_HIBERNATION_POSSIBLE
def_bool y
depends on !SMP
config ARCH_SUSPEND_POSSIBLE
def_bool y
depends on !SMP

View File

@ -167,7 +167,6 @@ libs-$(CONFIG_ARC) += arch/mips/fw/arc/
libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
libs-y += arch/mips/fw/lib/
libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/
#
# Board-dependent options and extra files
@ -184,7 +183,6 @@ load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
# Common Alchemy Au1x00 stuff
#
core-$(CONFIG_SOC_AU1X00) += arch/mips/alchemy/common/
cflags-$(CONFIG_SOC_AU1X00) += -I$(srctree)/arch/mips/include/asm/mach-au1x00
#
# AMD Alchemy Pb1000 eval board
@ -282,6 +280,10 @@ load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000
libs-$(CONFIG_MIPS_XXS1500) += arch/mips/alchemy/xxs1500/
load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
# must be last for Alchemy systems for GPIO to work properly
cflags-$(CONFIG_SOC_AU1X00) += -I$(srctree)/arch/mips/include/asm/mach-au1x00
#
# Cobalt Server
#
@ -675,6 +677,9 @@ core-y += arch/mips/kernel/ arch/mips/mm/ arch/mips/math-emu/
drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/
# suspend and hibernation support
drivers-$(CONFIG_PM) += arch/mips/power/
ifdef CONFIG_LASAT
rom.bin rom.sw: vmlinux
$(Q)$(MAKE) $(build)=arch/mips/lasat/image $@

View File

@ -1,3 +1,14 @@
# au1000-style gpio
config ALCHEMY_GPIO_AU1000
bool
# select this in your board config if you don't want to use the gpio
# namespace as documented in the manuals. In this case however you need
# to create the necessary gpio_* functions in your board code/headers!
# see arch/mips/include/asm/mach-au1x00/gpio.h for more information.
config ALCHEMY_GPIO_INDIRECT
def_bool n
choice
prompt "Machine type"
depends on MACH_ALCHEMY
@ -108,22 +119,27 @@ endchoice
config SOC_AU1000
bool
select SOC_AU1X00
select ALCHEMY_GPIO_AU1000
config SOC_AU1100
bool
select SOC_AU1X00
select ALCHEMY_GPIO_AU1000
config SOC_AU1500
bool
select SOC_AU1X00
select ALCHEMY_GPIO_AU1000
config SOC_AU1550
bool
select SOC_AU1X00
select ALCHEMY_GPIO_AU1000
config SOC_AU1200
bool
select SOC_AU1X00
select ALCHEMY_GPIO_AU1000
config SOC_AU1X00
bool
@ -134,4 +150,5 @@ config SOC_AU1X00
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_APM_EMULATION
select ARCH_REQUIRE_GPIOLIB
select GENERIC_GPIO
select ARCH_WANT_OPTIONAL_GPIOLIB

View File

@ -7,7 +7,14 @@
obj-y += prom.o irq.o puts.o time.o reset.o \
clocks.o platform.o power.o setup.o \
sleeper.o dma.o dbdma.o gpio.o
sleeper.o dma.o dbdma.o
# optional gpiolib support
ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
ifeq ($(CONFIG_GPIOLIB),y)
obj-$(CONFIG_ALCHEMY_GPIO_AU1000) += gpiolib-au1000.o
endif
endif
obj-$(CONFIG_PCI) += pci.o

View File

@ -1,201 +0,0 @@
/*
* Copyright (C) 2007-2009, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
* Architecture specific GPIO support
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Notes :
* au1000 SoC have only one GPIO line : GPIO1
* others have a second one : GPIO2
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/gpio.h>
struct au1000_gpio_chip {
struct gpio_chip chip;
void __iomem *regbase;
};
#if !defined(CONFIG_SOC_AU1000)
static int au1000_gpio2_get(struct gpio_chip *chip, unsigned offset)
{
u32 mask = 1 << offset;
struct au1000_gpio_chip *gpch;
gpch = container_of(chip, struct au1000_gpio_chip, chip);
return readl(gpch->regbase + AU1000_GPIO2_ST) & mask;
}
static void au1000_gpio2_set(struct gpio_chip *chip,
unsigned offset, int value)
{
u32 mask = ((GPIO2_OUT_EN_MASK << offset) | (!!value << offset));
struct au1000_gpio_chip *gpch;
unsigned long flags;
gpch = container_of(chip, struct au1000_gpio_chip, chip);
local_irq_save(flags);
writel(mask, gpch->regbase + AU1000_GPIO2_OUT);
local_irq_restore(flags);
}
static int au1000_gpio2_direction_input(struct gpio_chip *chip, unsigned offset)
{
u32 mask = 1 << offset;
u32 tmp;
struct au1000_gpio_chip *gpch;
unsigned long flags;
gpch = container_of(chip, struct au1000_gpio_chip, chip);
local_irq_save(flags);
tmp = readl(gpch->regbase + AU1000_GPIO2_DIR);
tmp &= ~mask;
writel(tmp, gpch->regbase + AU1000_GPIO2_DIR);
local_irq_restore(flags);
return 0;
}
static int au1000_gpio2_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
u32 mask = 1 << offset;
u32 out_mask = ((GPIO2_OUT_EN_MASK << offset) | (!!value << offset));
u32 tmp;
struct au1000_gpio_chip *gpch;
unsigned long flags;
gpch = container_of(chip, struct au1000_gpio_chip, chip);
local_irq_save(flags);
tmp = readl(gpch->regbase + AU1000_GPIO2_DIR);
tmp |= mask;
writel(tmp, gpch->regbase + AU1000_GPIO2_DIR);
writel(out_mask, gpch->regbase + AU1000_GPIO2_OUT);
local_irq_restore(flags);
return 0;
}
#endif /* !defined(CONFIG_SOC_AU1000) */
static int au1000_gpio1_get(struct gpio_chip *chip, unsigned offset)
{
u32 mask = 1 << offset;
struct au1000_gpio_chip *gpch;
gpch = container_of(chip, struct au1000_gpio_chip, chip);
return readl(gpch->regbase + AU1000_GPIO1_ST) & mask;
}
static void au1000_gpio1_set(struct gpio_chip *chip,
unsigned offset, int value)
{
u32 mask = 1 << offset;
u32 reg_offset;
struct au1000_gpio_chip *gpch;
unsigned long flags;
gpch = container_of(chip, struct au1000_gpio_chip, chip);
if (value)
reg_offset = AU1000_GPIO1_OUT;
else
reg_offset = AU1000_GPIO1_CLR;
local_irq_save(flags);
writel(mask, gpch->regbase + reg_offset);
local_irq_restore(flags);
}
static int au1000_gpio1_direction_input(struct gpio_chip *chip, unsigned offset)
{
u32 mask = 1 << offset;
struct au1000_gpio_chip *gpch;
gpch = container_of(chip, struct au1000_gpio_chip, chip);
writel(mask, gpch->regbase + AU1000_GPIO1_ST);
return 0;
}
static int au1000_gpio1_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
u32 mask = 1 << offset;
struct au1000_gpio_chip *gpch;
gpch = container_of(chip, struct au1000_gpio_chip, chip);
writel(mask, gpch->regbase + AU1000_GPIO1_TRI_OUT);
au1000_gpio1_set(chip, offset, value);
return 0;
}
struct au1000_gpio_chip au1000_gpio_chip[] = {
[0] = {
.regbase = (void __iomem *)SYS_BASE,
.chip = {
.label = "au1000-gpio1",
.direction_input = au1000_gpio1_direction_input,
.direction_output = au1000_gpio1_direction_output,
.get = au1000_gpio1_get,
.set = au1000_gpio1_set,
.base = 0,
.ngpio = 32,
},
},
#if !defined(CONFIG_SOC_AU1000)
[1] = {
.regbase = (void __iomem *)GPIO2_BASE,
.chip = {
.label = "au1000-gpio2",
.direction_input = au1000_gpio2_direction_input,
.direction_output = au1000_gpio2_direction_output,
.get = au1000_gpio2_get,
.set = au1000_gpio2_set,
.base = AU1XXX_GPIO_BASE,
.ngpio = 32,
},
},
#endif
};
static int __init au1000_gpio_init(void)
{
gpiochip_add(&au1000_gpio_chip[0].chip);
#if !defined(CONFIG_SOC_AU1000)
gpiochip_add(&au1000_gpio_chip[1].chip);
#endif
return 0;
}
arch_initcall(au1000_gpio_init);

Some files were not shown because too many files have changed in this diff Show More