iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL

Browse Source 
LP_OUTPUT_HOLD is only in MIPI_PORT_CTRL(PORT_A) even for PORT_C in case
of dual link. In the dual link implementation, the bit is correctly set
or unset for hardcoded PORT_A, but for bit update the register base value
is read by using MIPI_PORT_CTRL(port) in a loop. The second iteration will
read base value from PORT_C and program for PORT_A. Mostly in case of dual
link all other bit values should be same, but logically we should read from
PORT_A. So hardcode to read initial value from PORT_A as well.

Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This commit is contained in:
Shobhit Kumar 2015-02-05 17:08:45 +05:30 committed by Jani Nikula
parent f0a1fb10e5
commit 4ba7d93afe
1 changed files with 2 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
drivers/gpu/drm/i915/intel_dsi.c
View File

@ -360,12 +360,11 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder)
I915_WRITE(MIPI_DEVICE_READY(port), ULPS_STATE_ENTER);
usleep_range(2500, 3000);
val = I915_READ(MIPI_PORT_CTRL(port));
/* Enable MIPI PHY transparent latch
* Common bit for both MIPI Port A & MIPI Port C
* No similar bit in MIPI Port C reg
*/
val = I915_READ(MIPI_PORT_CTRL(PORT_A));
I915_WRITE(MIPI_PORT_CTRL(PORT_A), val | LP_OUTPUT_HOLD);
usleep_range(1000, 1500);
@ -543,10 +542,10 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
== 0x00000), 30))
DRM_ERROR("DSI LP not going Low\n");
val = I915_READ(MIPI_PORT_CTRL(port));
/* Disable MIPI PHY transparent latch
* Common bit for both MIPI Port A & MIPI Port C
*/
val = I915_READ(MIPI_PORT_CTRL(PORT_A));
I915_WRITE(MIPI_PORT_CTRL(PORT_A), val & ~LP_OUTPUT_HOLD);
usleep_range(1000, 1500);