arm64: dts: qcom: msm8953: Add device tree for Motorola G5 Plus
Add device tree for the Motorola G5 Plus (potter) smartphone. This device is based on Snapdragon 625 (msm8953) SoC. Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221207-msm8953-6-1-next-dtbs-v3-v3-4-a64b3b0af0eb@z3ntu.xyz
This commit is contained in:
Sireesh Kodali
Bjorn Andersson
parent
eee5a89b4f
commit
4ccd0dd6a3
@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandmax.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-kugo.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-suzu.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb
|
||||
|
||||
305
arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts
Normal file
305
arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts
Normal file
@ -0,0 +1,305 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2022, Sireesh Kodali
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8953.dtsi"
|
||||
#include "pm8953.dtsi"
|
||||
#include "pmi8950.dtsi"
|
||||
|
||||
/delete-node/ &cont_splash_mem;
|
||||
/delete-node/ &qseecom_mem;
|
||||
|
||||
/ {
|
||||
model = "Motorola G5 Plus";
|
||||
compatible = "motorola,potter", "qcom,msm8953";
|
||||
chassis-type = "handset";
|
||||
qcom,msm-id = <293 0>;
|
||||
qcom,board-id = <0x46 0x83a0>;
|
||||
|
||||
chosen {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
framebuffer@90001000 {
|
||||
compatible = "simple-framebuffer";
|
||||
reg = <0 0x90001000 0 (2220 * 1920 * 3)>;
|
||||
|
||||
width = <1080>;
|
||||
height = <1920>;
|
||||
stride = <(1080 * 3)>;
|
||||
format = "r8g8b8";
|
||||
|
||||
power-domains = <&gcc MDSS_GDSC>;
|
||||
|
||||
clocks = <&gcc GCC_MDSS_AHB_CLK>,
|
||||
<&gcc GCC_MDSS_AXI_CLK>,
|
||||
<&gcc GCC_MDSS_VSYNC_CLK>,
|
||||
<&gcc GCC_MDSS_MDP_CLK>,
|
||||
<&gcc GCC_MDSS_BYTE0_CLK>,
|
||||
<&gcc GCC_MDSS_PCLK0_CLK>,
|
||||
<&gcc GCC_MDSS_ESC0_CLK>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio_key_default>;
|
||||
|
||||
key-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
qseecom_mem: qseecom@84300000 {
|
||||
reg = <0x0 0x84300000 0x0 0x2000000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
cont_splash_mem: cont-splash@90001000 {
|
||||
reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
reserved@aefd2000 {
|
||||
reg = <0x0 0xaefd2000 0x0 0x2e000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
reserved@eefe4000 {
|
||||
reg = <0x0 0xeefe4000 0x0 0x1c000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ramoops@ef000000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0x0 0xef000000 0x0 0x80000>;
|
||||
console-size = <0x40000>;
|
||||
ftrace-size = <0>;
|
||||
record-size = <0x3f800>;
|
||||
pmsg-size = <0x800>;
|
||||
};
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&hsusb_phy {
|
||||
vdd-supply = <&pm8953_l3>;
|
||||
vdda-pll-supply = <&pm8953_l7>;
|
||||
vdda-phy-dpdm-supply = <&pm8953_l13>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c_3 {
|
||||
status = "okay";
|
||||
|
||||
touchscreen@20 {
|
||||
reg = <0x20>;
|
||||
compatible = "syna,rmi4-i2c";
|
||||
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ts_reset>;
|
||||
|
||||
vdd-supply = <&pm8953_l22>;
|
||||
vio-supply = <&pm8953_l6>;
|
||||
|
||||
syna,reset-delay-ms = <200>;
|
||||
syna,startup-delay-ms = <500>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8953_resin {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmi8950_wled {
|
||||
qcom,current-limit-microamp = <25000>;
|
||||
qcom,num-strings = <3>;
|
||||
qcom,external-pfet;
|
||||
qcom,cabc;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
regulators {
|
||||
compatible = "qcom,rpm-pm8953-regulators";
|
||||
vdd_s1-supply = <&vph_pwr>;
|
||||
vdd_s2-supply = <&vph_pwr>;
|
||||
vdd_s3-supply = <&vph_pwr>;
|
||||
vdd_s4-supply = <&vph_pwr>;
|
||||
vdd_s5-supply = <&vph_pwr>;
|
||||
vdd_s6-supply = <&vph_pwr>;
|
||||
vdd_s7-supply = <&vph_pwr>;
|
||||
vdd_l1-supply = <&pm8953_s3>;
|
||||
vdd_l2_l3-supply = <&pm8953_s3>;
|
||||
vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
|
||||
vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
|
||||
vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
|
||||
|
||||
pm8953_s1: s1 {
|
||||
regulator-min-microvolt = <863000>;
|
||||
regulator-max-microvolt = <1152000>;
|
||||
};
|
||||
|
||||
pm8953_s3: s3 {
|
||||
regulator-min-microvolt = <1224000>;
|
||||
regulator-max-microvolt = <1224000>;
|
||||
};
|
||||
|
||||
pm8953_s4: s4 {
|
||||
regulator-min-microvolt = <1896000>;
|
||||
regulator-max-microvolt = <2048000>;
|
||||
};
|
||||
|
||||
pm8953_l1: l1 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
};
|
||||
|
||||
pm8953_l2: l2 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
|
||||
pm8953_l3: l3 {
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <925000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8953_l5: l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8953_l6: l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pm8953_l7: l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1900000>;
|
||||
};
|
||||
|
||||
pm8953_l8: l8 {
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
pm8953_l9: l9 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8953_l10: l10 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8953_l11: l11 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
pm8953_l12: l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
pm8953_l13: l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3125000>;
|
||||
};
|
||||
|
||||
pm8953_l15: l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8953_l16: l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8953_l17: l17 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
pm8953_l19: l19 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
};
|
||||
|
||||
pm8953_l22: l22 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
pm8953_l23: l23 {
|
||||
regulator-min-microvolt = <975000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
vmmc-supply = <&pm8953_l8>;
|
||||
vqmmc-supply = <&pm8953_l5>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
vmmc-supply = <&pm8953_l11>;
|
||||
vqmmc-supply = <&pm8953_l12>;
|
||||
|
||||
cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <1 2>, <96 4>, <111 1>, <126 1>;
|
||||
|
||||
ts_reset: ts-reset-state {
|
||||
pins = "gpio64";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
&usb3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_dwc3 {
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
Loading…
x
Reference in New Issue
Block a user