iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

dt-bindings: Remove "status" from examples

Browse Source 
Pretty much any node can have a status property, so it doesn't need to
be in examples.

Converted with the following command and removed examples with SoC and
board specific splits:

git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d'

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Rob Herring 2017-09-01 15:05:19 -05:00
parent d587b82df2
commit 4da722ca19
241 changed files with 0 additions and 311 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/devicetree/bindings/arm/arch_timer.txt
View File

@ -108,6 +108,5 @@ Example:
frame-number = <1>
interrupts = <0 15 0x8>;
reg = <0xf0003000 0x1000>;
status = "disabled";
};
};

1
Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
View File

@ -183,7 +183,6 @@ cpm_syscon0: system-controller@440000 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&cpm_pinctrl 0 0 32>;
status = "disabled";
};
};

2
Documentation/devicetree/bindings/ata/apm-xgene.txt
View File

@ -57,7 +57,6 @@ Example:
<0x0 0x1f227000 0x0 0x1000>;
interrupts = <0x0 0x87 0x4>;
dma-coherent;
status = "ok";
clocks = <&sataclk 0>;
phys = <&phy2 0>;
phy-names = "sata-phy";
@ -72,7 +71,6 @@ Example:
<0x0 0x1f237000 0x0 0x1000>;
interrupts = <0x0 0x88 0x4>;
dma-coherent;
status = "ok";
clocks = <&sataclk 0>;
phys = <&phy3 0>;
phy-names = "sata-phy";

1
Documentation/devicetree/bindings/ata/imx-pata.txt
View File

@ -13,5 +13,4 @@ Example:
reg = <0x83fe0000 0x4000>;
interrupts = <70>;
clocks = <&clks 161>;
status = "disabled";
};

3
Documentation/devicetree/bindings/bus/mvebu-mbus.txt
View File

@ -227,7 +227,6 @@ See the example below, where a more complete device tree is shown:
};
devbus-bootcs {
status = "okay";
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>;
/* NOR */
@ -240,7 +239,6 @@ See the example below, where a more complete device tree is shown:
pcie-controller {
compatible = "marvell,armada-xp-pcie";
status = "okay";
device_type = "pci";
#address-cells = <3>;
@ -258,7 +256,6 @@ See the example below, where a more complete device tree is shown:
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
};

2
Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt
View File

@ -84,7 +84,6 @@ gmi@70090000 {
reset-names = "gmi";
ranges = <4 0 0xd0000000 0xfffffff>;
status = "okay";
bus@4,0 {
compatible = "simple-bus";
@ -121,7 +120,6 @@ gmi@70090000 {
reset-names = "gmi";
ranges = <4 0 0xd0000000 0xfffffff>;
status = "okay";
can@4,0 {
reg = <4 0 0x100>;

1
Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
View File

@ -33,7 +33,6 @@ Example:
#size-cells = <1>;
ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
status = "disabled";
child1 {
...

1
Documentation/devicetree/bindings/clock/alphascale,acc.txt
View File

@ -102,7 +102,6 @@ uart4: serial@80010000 {
reg = <0x80010000 0x4000>;
clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
interrupts = <19>;
status = "disabled";
};
Clock consumer with only one, _AHB_ sink.

1
Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
View File

@ -41,5 +41,4 @@ Example: UART controller node that consumes the clock and reset generated
interrupts = <0 90 1>;
clocks = <&clkc_AO CLKID_AO_UART1>;
resets = <&clkc_AO RESET_AO_UART1>;
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
View File

@ -33,5 +33,4 @@ Example: UART controller node that consumes the clock generated by the clock
reg = <0xc81004c0 0x14>;
interrupts = <0 90 1>;
clocks = <&clkc CLKID_CLK81>;
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
View File

@ -39,5 +39,4 @@ Example: UART controller node that consumes the clock generated by the clock
reg = <0xc81004c0 0x14>;
interrupts = <0 90 1>;
clocks = <&clkc CLKID_CLK81>;
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt
View File

@ -46,7 +46,6 @@ Device tree example:
uart@3e002000 {
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e002000 0x1000>;
clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;

1
Documentation/devicetree/bindings/clock/exynos5433-clock.txt
View File

@ -465,5 +465,4 @@ Example 3: UART controller node that consumes the clock generated by the clock
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
pinctrl-0 = <&uart0_bus>;
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/hi3660-clock.txt
View File

@ -38,5 +38,4 @@ Examples:
clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
<&crg_ctrl HI3660_PCLK>;
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/hix5hd2-clock.txt
View File

@ -27,5 +27,4 @@ Examples:
interrupts = <0 49 4>;
clocks = <&clock HIX5HD2_FIXED_83M>;
clock-names = "apb_pclk";
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/imx21-clock.txt
View File

@ -24,5 +24,4 @@ Examples:
clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
<&clks IMX21_CLK_PER1>;
clock-names = "ipg", "per";
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/imx23-clock.txt
View File

@ -67,5 +67,4 @@ auart0: serial@8006c000 {
reg = <0x8006c000 0x2000>;
interrupts = <24 25 23>;
clocks = <&clks 32>;
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/imx25-clock.txt
View File

@ -157,5 +157,4 @@ uart1: serial@43f90000 {
interrupts = <45>;
clocks = <&clks 79>, <&clks 50>;
clock-names = "ipg", "per";
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/imx27-clock.txt
View File

@ -24,5 +24,4 @@ Examples:
clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/imx28-clock.txt
View File

@ -90,5 +90,4 @@ auart0: serial@8006a000 {
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
clocks = <&clks 45>;
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/imx31-clock.txt
View File

@ -87,5 +87,4 @@ uart1: serial@43f90000 {
interrupts = <45>;
clocks = <&clks 10>, <&clks 30>;
clock-names = "ipg", "per";
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/imx5-clock.txt
View File

@ -25,5 +25,4 @@ can1: can@53fc8000 {
interrupts = <82>;
clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/imx6q-clock.txt
View File

@ -27,5 +27,4 @@ uart1: serial@02020000 {
interrupts = <0 26 0x04>;
clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
View File

@ -66,7 +66,6 @@ clock@70110000 {
#clock-cells = <0>;
clock-output-names = "dfllCPU_out";
vdd-cpu-supply = <&vdd_cpu>;
status = "okay";
nvidia,sample-rate = <12500>;
nvidia,droop-ctrl = <0x00000f00>;

1
Documentation/devicetree/bindings/clock/pxa-clock.txt
View File

@ -12,5 +12,4 @@ Examples:
pxa2xx_clks: pxa2xx_clks@41300004 {
compatible = "marvell,pxa-clocks";
#clock-cells = <1>;
status = "okay";
};

1
Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
View File

@ -81,5 +81,4 @@ Examples
dma-names = "tx", "rx";
power-domains = <&cpg>;
resets = <&cpg 310>;
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
View File

@ -44,5 +44,4 @@ Examples
interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
power-domains = <&cpg_clocks>;
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
View File

@ -50,5 +50,4 @@ Examples
clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
View File

@ -46,5 +46,4 @@ Example: UART controller node that consumes the clock generated by the clock
interrupts = <1 23 3 4>, <1 23 4 4>;
clock-names = "uart", "clk_uart_baud2";
clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
View File

@ -46,5 +46,4 @@ Example: UART controller node that consumes the clock generated by the clock
clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3";
clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
<&clocks SCLK_UART>;
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
View File

@ -52,5 +52,4 @@ Example: UART controller node that consumes the clock generated by the clock
"clk_uart_baud3";
clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
<&clocks SCLK_UART>;
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt
View File

@ -73,5 +73,4 @@ Example: UART controller node that consumes the clock generated by the clock
"clk_uart_baud3";
clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>,
<&clock SCLK_UART>;
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
View File

@ -74,5 +74,4 @@ Example: UART controller node that consumes the clock generated by the clock
"clk_uart_baud1";
clocks = <&clocks UART0>, <&clocks UART0>,
<&clocks SCLK_UART0>;
status = "disabled";
};

2
Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
View File

@ -81,13 +81,11 @@ atl: atl@4843c000 {
<&atl_clkin2_ck>, <&atl_clkin3_ck>;
clocks = <&atl_gfclk_mux>;
clock-names = "fck";
status = "disabled";
};
#include <dt-bindings/clk/ti-dra7-atl.h>
&atl {
status = "okay";
atl2 {
bws = <DRA7_ATL_WS_MCASP2_FSX>;

1
Documentation/devicetree/bindings/clock/zx296702-clk.txt
View File

@ -31,5 +31,4 @@ uart0: serial@0x09405000 {
reg = <0x09405000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&lsp1clk ZX296702_UART0_PCLK>;
status = "disabled";
};

1
Documentation/devicetree/bindings/clock/zx296718-clk.txt
View File

@ -34,5 +34,4 @@ usbphy0:usb-phy0 {
#phy-cells = <0>;
clocks = <&topclk USB20_PHY_CLK>;
clock-names = "phyclk";
status = "okay";
};

1
Documentation/devicetree/bindings/crypto/fsl-dcp.txt
View File

@ -13,5 +13,4 @@ dcp@80028000 {
compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
reg = <0x80028000 0x2000>;
interrupts = <52 53>;
status = "okay";
};

1
Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
View File

@ -25,5 +25,4 @@ Example:
"eip";
clocks = <&cpm_syscon0 1 26>;
dma-mask = <0xff 0xffffffff>;
status = "disabled";
};

1
Documentation/devicetree/bindings/crypto/marvell-cesa.txt
View File

@ -41,5 +41,4 @@ Examples:
clock-names = "cesa0", "cesa1";
marvell,crypto-srams = <&crypto_sram0>, <&crypto_sram1>;
marvell,crypto-sram-size = <0x600>;
status = "okay";
};

1
Documentation/devicetree/bindings/crypto/mv_cesa.txt
View File

@ -29,5 +29,4 @@ Examples:
interrupts = <22>;
marvell,crypto-srams = <&crypto_sram>;
marvell,crypto-sram-size = <0x600>;
status = "okay";
};

1
Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
View File

@ -25,5 +25,4 @@ Examples:
clock-names = "aclk", "hclk", "sclk", "apb_pclk";
resets = <&cru SRST_CRYPTO>;
reset-names = "crypto-rst";
status = "okay";
};

1
Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt
View File

@ -15,5 +15,4 @@ Example:
rockchip,pmu = <&pmugrf>;
clocks = <&cru PCLK_DDR_MON>;
clock-names = "pclk_ddr_mon";
status = "disabled";
};

1
Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
View File

@ -205,5 +205,4 @@ Example:
rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>;
rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>;
rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>;
status = "disabled";
};

1
Documentation/devicetree/bindings/display/atmel,lcdc.txt
View File

@ -34,7 +34,6 @@ Example:
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>;
display = <&display0>;
status = "okay";
#address-cells = <1>;
#size-cells = <1>;

1
Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
View File

@ -23,7 +23,6 @@ Example:
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
hlcdc-display-controller {
compatible = "atmel,hlcdc-display-controller";

1
Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
View File

@ -33,7 +33,6 @@ stdp2690-ge-b850v3-fw required properties:
Example:
&mux2_i2c2 {
status = "okay";
clock-frequency = <100000>;
stdp4028@73 {

1
Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
View File

@ -43,7 +43,6 @@ Example:
clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
clock-names = "iahb", "isfr";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
ports {
#address-cells = <1>;

1
Documentation/devicetree/bindings/display/fsl,tcon.txt
View File

@ -14,5 +14,4 @@ timing-controller@4003d000 {
reg = <0x4003d000 0x1000>;
clocks = <&clks VF610_CLK_TCON0>;
clock-names = "ipg";
status = "okay";
};

1
Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt
View File

@ -23,7 +23,6 @@ Example:
reg = <0x44000000 0x10000>;
interrupts = <17>;
clocks = <&clks CLK_LCD>;
status = "okay";
port {
lcdc_out: endpoint {

1
Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
View File

@ -18,6 +18,5 @@ Example:
power-supply = <...>;
backlight = <&backlight>;
enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};

1
Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
View File

@ -59,7 +59,6 @@ Example:
pinctrl-names = "default";
pinctrl-0 = <&edp_hpd>;
status = "disabled";
ports {
#address-cells = <1>;

1
Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
View File

@ -43,7 +43,6 @@ hdmi: hdmi@ff980000 {
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
clock-names = "iahb", "isfr";
status = "disabled";
ports {
hdmi_in: port {
#address-cells = <1>;

2
Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
View File

@ -36,7 +36,6 @@ Example:
resets = <&cru SRST_MIPIDSI0>;
reset-names = "apb";
rockchip,grf = <&grf>;
status = "okay";
ports {
#address-cells = <1>;
@ -65,6 +64,5 @@ Example:
pinctrl-names = "default";
pinctrl-0 = <&lcd_en>;
backlight = <&backlight>;
status = "okay";
};
};

1
Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
View File

@ -25,7 +25,6 @@ hdmi: hdmi@20034000 {
clock-names = "pclk";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_ctl>;
status = "disabled";
hdmi_in: port {
#address-cells = <1>;

1
Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt
View File

@ -28,6 +28,5 @@ chosen {
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>;
status = "disabled";
};
};

1
Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
View File

@ -260,7 +260,6 @@ hdmi: hdmi@01c16000 {
<&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_DEDICATED 24>;
dma-names = "ddc-tx", "ddc-rx", "audio-tx";
status = "disabled";
ports {
#address-cells = <1>;

1
Documentation/devicetree/bindings/dma/fsl-edma.txt
View File

@ -72,5 +72,4 @@ sai2: sai@40031000 {
dma-names = "tx", "rx";
dmas = <&edma0 0 21>,
<&edma0 0 20>;
status = "disabled";
};

1
Documentation/devicetree/bindings/dma/mv-xor.txt
View File

@ -30,7 +30,6 @@ xor@d0060900 {
reg = <0xd0060900 0x100
0xd0060b00 0x100>;
clocks = <&coreclk 0>;
status = "okay";
xor00 {
interrupts = <51>;

1
Documentation/devicetree/bindings/dma/qcom_adm.txt
View File

@ -48,7 +48,6 @@ Each dmas request consists of 3 cells:
Example:
spi4: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;

1
Documentation/devicetree/bindings/dma/snps-dma.txt
View File

@ -63,7 +63,6 @@ Example:
compatible = "arm,pl011", "arm,primecell";
reg = <0xe0000000 0x1000>;
interrupts = <0 35 0x4>;
status = "disabled";
dmas = <&dmahost 12 0 1>,
<&dmahost 13 0 1 0>;
dma-names = "rx", "rx";

1
Documentation/devicetree/bindings/dma/st_fdma.txt
View File

@ -69,7 +69,6 @@ Example:
sti_uni_player2: sti-uni-player@2 {
compatible = "st,sti-uni-player";
status = "disabled";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
clocks = <&clk_s_d0_flexgen CLK_PCM_2>;

1
Documentation/devicetree/bindings/dma/ste-dma40.txt
View File

@ -135,5 +135,4 @@ Example:
<&dma 13 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "rx";
status = "disabled";
};

1
Documentation/devicetree/bindings/dma/sun4i-dma.txt
View File

@ -40,7 +40,6 @@ Example:
clock-names = "ahb", "mod";
dmas = <&dma 1 29>, <&dma 1 28>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};

1
Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
View File

@ -62,7 +62,6 @@ uart1: serial@4806a000 {
interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
status = "disabled";
/* Requesting crossbar input 49 and 50 */
dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
dma-names = "tx", "rx";

1
Documentation/devicetree/bindings/dma/ti-edma.txt
View File

@ -102,7 +102,6 @@ mcasp0: mcasp@48038000 {
reg-names = "mpu", "dat";
interrupts = <80>, <81>;
interrupt-names = "tx", "rx";
status = "disabled";
/* DMA channels 8 and 9 executed on eDMA TC2 - high priority queue */
dmas = <&edma 8 2>,
<&edma 9 2>;

1
Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
View File

@ -31,7 +31,6 @@ Example for full FPGA configuration:
cell-index = <1>;
interrupts = <92>;
clocks = <&coreclk 0>;
status = "okay";
fpga_mgr_spi: fpga-mgr@0 {
compatible = "xlnx,fpga-slave-serial";

1
Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
View File

@ -23,7 +23,6 @@ gpio0: gpio@1100 {
#gpio-cells = <2>;
reg = <0x1100 0x080>;
interrupts = <78 0x8>;
status = "okay";
};
Example of gpio-controller node for a ls2080a SoC:

1
Documentation/devicetree/bindings/gpio/spear_spics.txt
View File

@ -42,7 +42,6 @@ spics: spics@e0700000{
spi0: spi@e0100000 {
status = "okay";
num-cs = <3>;
cs-gpios = <&gpio1 7 0>, <&spics 0>,
<&spics 1>;

3
Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
View File

@ -51,7 +51,6 @@ Example for GK20A:
resets = <&tegra_car 184>;
reset-names = "gpu";
iommus = <&mc TEGRA_SWGROUP_GPU>;
status = "disabled";
};
Example for GM20B:
@ -70,7 +69,6 @@ Example for GM20B:
resets = <&tegra_car 184>;
reset-names = "gpu";
iommus = <&mc TEGRA_SWGROUP_GPU>;
status = "disabled";
};
Example for GP10B:
@ -89,5 +87,4 @@ Example for GP10B:
reset-names = "gpu";
power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
iommus = <&smmu TEGRA186_SID_GPU>;
status = "disabled";
};

1
Documentation/devicetree/bindings/gpu/samsung-g2d.txt
View File

@ -24,5 +24,4 @@ Example:
interrupts = <0 89 0>;
clocks = <&clock 177>, <&clock 277>;
clock-names = "sclk_fimg2d", "fimg2d";
status = "disabled";
};

1
Documentation/devicetree/bindings/hsi/omap-ssi.txt
View File

@ -92,6 +92,5 @@ ssi-controller@48058000 {
interrupts = <69>,
<70>;
status = "disabled"; /* second port is not used on N900 */
}
}

1
Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
View File

@ -102,7 +102,6 @@ And for clarification, here are the snipplets for the i2c-parents:
#address-cells = <1>;
#size-cells = <0>;
compatible = "i2c-gpio";
status = "disabled";
gpios = <&gpio5 6 GPIO_ACTIVE_HIGH /* sda */
&gpio5 5 GPIO_ACTIVE_HIGH /* scl */
>;

1
Documentation/devicetree/bindings/i2c/i2c-efm32.txt
View File

@ -22,7 +22,6 @@ Example:
interrupts = <9>;
clocks = <&cmu clk_HFPERCLKI2C0>;
clock-frequency = <100000>;
status = "ok";
energymicro,location = <3>;
eeprom@50 {

1
Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
View File

@ -71,5 +71,4 @@ Example:
reset-names = "i2c";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
status = "disabled";
};

1
Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
View File

@ -37,5 +37,4 @@ For example:
clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
clock-names = "tsc_clk";
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};

1
Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt
View File

@ -17,5 +17,4 @@ adc0: adc@400e3000 {
clocks = <&ccu1 CLK_APB3_ADC0>;
vref-supply = <&reg_vdda>;
resets = <&rgu 40>;
status = "disabled";
};

1
Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt
View File

@ -16,5 +16,4 @@ dac: dac@400e1000 {
clocks = <&ccu1 CLK_APB3_DAC>;
vref-supply = <&reg_vdda>;
resets = <&rgu 42>;
status = "disabled";
};

1
Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
View File

@ -72,7 +72,6 @@ Example:
/* Required Board specific properties */
keypad,num-rows = <5>;
keypad,num-columns = <5>;
status = "okay";
linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_F) /* key_forward */
MATRIX_KEY(0x00, 0x03, KEY_HOME) /* key_home */

1
Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
View File

@ -32,5 +32,4 @@ Example:
pinctrl-1 = <&pinctrl_touchctrl_default>;
pinctrl-2 = <&pinctrl_touchctrl_gpios>;
vf50-ts-min-pressure = <200>;
status = "disabled";
};

1
Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
View File

@ -35,5 +35,4 @@ Example:
measure-delay-time = <0xfff>;
pre-charge-time = <0xffff>;
touchscreen-average-samples = <32>;
status = "okay";
};

1
Documentation/devicetree/bindings/media/pxa-camera.txt
View File

@ -24,7 +24,6 @@ Example:
clock-frequency = <50000000>;
clock-output-names = "qci_mclk";
status = "okay";
port {
#address-cells = <1>;

1
Documentation/devicetree/bindings/media/s5p-cec.txt
View File

@ -33,5 +33,4 @@ hdmicec: cec@100B0000 {
hdmi-phandle = <&hdmi>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_cec>;
status = "okay";
};

2
Documentation/devicetree/bindings/media/samsung-fimc.txt
View File

@ -166,7 +166,6 @@ Example:
clock-output-names = "cam_a_clkout", "cam_b_clkout";
pinctrl-names = "default";
pinctrl-0 = <&cam_port_a_clk_active>;
status = "okay";
#address-cells = <1>;
#size-cells = <1>;
@ -189,7 +188,6 @@ Example:
compatible = "samsung,exynos4210-fimc";
reg = <0x11800000 0x1000>;
interrupts = <0 85 0>;
status = "okay";
};
csis_0: csis@11880000 {

1
Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
View File

@ -52,7 +52,6 @@ Example:
c8sectpfe@08a20000 {
compatible = "st,stih407-c8sectpfe";
status = "okay";
reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>;
reg-names = "stfe", "stfe-ram";
interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, <GIC_SPI 35 IRQ_TYPE_NONE>;

1
Documentation/devicetree/bindings/media/ti,da850-vpif.txt
View File

@ -59,7 +59,6 @@ I2C-connected TVP5147 decoder:
tvp5147@5d {
compatible = "ti,tvp5147";
reg = <0x5d>;
status = "okay";
port {
composite_in: endpoint {

1
Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
View File

@ -130,7 +130,6 @@ The reg property implicitly specifies the chip select as this:
Example:
devbus-bootcs@d0010400 {
status = "okay";
ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf0000000, size 0x1000000 */
#address-cells = <1>;
#size-cells = <1>;

2
Documentation/devicetree/bindings/mfd/act8945a.txt
View File

@ -12,7 +12,6 @@ Example:
pmic@5b {
compatible = "active-semi,act8945a";
reg = <0x5b>;
status = "okay";
active-semi,vsel-high;
@ -79,6 +78,5 @@ Example:
active-semi,input-voltage-threshold-microvolt = <6600>;
active-semi,precondition-timeout = <40>;
active-semi,total-timeout = <3>;
status = "okay";
};
};

1
Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
View File

@ -25,7 +25,6 @@ Example:
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
hlcdc-display-controller {
compatible = "atmel,hlcdc-display-controller";

1
Documentation/devicetree/bindings/mfd/da9052-i2c.txt
View File

@ -29,7 +29,6 @@ Sub-nodes:
Examples:
i2c@63fc8000 { /* I2C1 */
status = "okay";
pmic: dialog@48 {
compatible = "dlg,da9053-aa";

1
Documentation/devicetree/bindings/mfd/mc13xxx.txt
View File

@ -116,7 +116,6 @@ ecspi@70010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
<&gpio4 25 0>; /* GPIO4_25 */
status = "okay";
pmic: mc13892@0 {
#address-cells = <1>;

2
Documentation/devicetree/bindings/mfd/mxs-lradc.txt
View File

@ -26,7 +26,6 @@ Example for i.MX23 SoC:
compatible = "fsl,imx23-lradc";
reg = <0x80050000 0x2000>;
interrupts = <36 37 38 39 40 41 42 43 44>;
status = "okay";
fsl,lradc-touchscreen-wires = <4>;
fsl,ave-ctrl = <4>;
fsl,ave-delay = <2>;
@ -39,7 +38,6 @@ Example for i.MX28 SoC:
compatible = "fsl,imx28-lradc";
reg = <0x80050000 0x2000>;
interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>;
status = "okay";
fsl,lradc-touchscreen-wires = <5>;
fsl,ave-ctrl = <4>;
fsl,ave-delay = <2>;

2
Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
View File

@ -57,7 +57,6 @@ audio-subsystem {
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
status = "disabled";
};
serial_3: serial@11460000 {
@ -69,6 +68,5 @@ audio-subsystem {
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
pinctrl-0 = <&uart_aud_bus>;
status = "disabled";
};
};

1
Documentation/devicetree/bindings/misc/atmel-ssc.txt
View File

@ -47,5 +47,4 @@ ssc0: ssc@f0010000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};

1
Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
View File

@ -74,5 +74,4 @@ Example:
phys = <&emmc_phy>;
phy-names = "phy_arasan";
#clock-cells = <0>;
status = "disabled";
};

1
Documentation/devicetree/bindings/mmc/davinci_mmc.txt
View File

@ -24,7 +24,6 @@ mmc0: mmc@1c40000 {
compatible = "ti,da830-mmc",
reg = <0x40000 0x1000>;
interrupts = <16>;
status = "okay";
bus-width = <4>;
max-frequency = <50000000>;
dmas = <&edma 16

1
Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt
View File

@ -20,5 +20,4 @@ sdhci1: sdhci@10014000 {
dma-names = "rx-tx";
bus-width = <4>;
cd-gpios = <&gpio3 29>;
status = "okay";
};

1
Documentation/devicetree/bindings/mmc/mmc-card.txt
View File

@ -21,7 +21,6 @@ Example:
vmmc-supply = <&reg_vcc3v3>;
bus-width = <8>;
non-removable;
status = "okay";
mmccard: mmccard@0 {
reg = <0>;

1
Documentation/devicetree/bindings/mmc/mmc.txt
View File

@ -153,7 +153,6 @@ mmc3: mmc@01c12000 {
bus-width = <4>;
non-removable;
mmc-pwrseq = <&sdhci0_pwrseq>
status = "okay";
brcmf: bcrmf@1 {
reg = <1>;

1
Documentation/devicetree/bindings/mmc/orion-sdio.txt
View File

@ -13,5 +13,4 @@ Example:
reg = <0xd00d4000 0x200>;
interrupts = <54>;
clocks = <&gateclk 17>;
status = "disabled";
};

3
Documentation/devicetree/bindings/mmc/sdhci-st.txt
View File

@ -63,7 +63,6 @@ Example:
mmc0: sdhci@fe81e000 {
compatible = "st,sdhci";
status = "disabled";
reg = <0xfe81e000 0x1000>;
interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>;
interrupt-names = "mmcirq";
@ -77,7 +76,6 @@ mmc0: sdhci@fe81e000 {
mmc1: sdhci@09080000 {
compatible = "st,sdhci-stih407", "st,sdhci";
status = "disabled";
reg = <0x09080000 0x7ff>;
reg-names = "mmc";
interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
@ -94,7 +92,6 @@ mmc1: sdhci@09080000 {
mmc0: sdhci@09060000 {
compatible = "st,sdhci-stih407", "st,sdhci";
status = "disabled";
reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
reg-names = "mmc", "top-mmc-delay";
interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;

Some files were not shown because too many files have changed in this diff Show More