regulator: tps65090: Set voltage for fixed regulators

According to the tps65090 data manual [0], the DCDC1 and DCDC2
step-down converters and the LDO's have a fixed output voltage.

Add this information to the driver since these fixed regulators
can be used as parent input supply for switches that don't have
an output voltage defined. So the regulator core needs to fetch
the FET parent output voltage if the child voltage is queried.

[0]: http://www.ti.com/lit/gpn/tps65090

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Javier Martinez Canillas 2014-07-31 14:31:05 +02:00 committed by Mark Brown
parent 7171511eae
commit 4f2352cf52

View File

@ -192,12 +192,14 @@ static struct regulator_ops tps65090_fet_control_ops = {
static struct regulator_ops tps65090_ldo_ops = {
};
#define tps65090_REG_DESC(_id, _sname, _en_reg, _en_bits, _ops) \
#define tps65090_REG_DESC(_id, _sname, _en_reg, _en_bits, _nvolt, _volt, _ops) \
{ \
.name = "TPS65090_RAILS"#_id, \
.supply_name = _sname, \
.id = TPS65090_REGULATOR_##_id, \
.n_voltages = _nvolt, \
.ops = &_ops, \
.fixed_uV = _volt, \
.enable_reg = _en_reg, \
.enable_val = _en_bits, \
.enable_mask = _en_bits, \
@ -205,40 +207,46 @@ static struct regulator_ops tps65090_ldo_ops = {
.owner = THIS_MODULE, \
}
#define tps65090_REG_FIXEDV(_id, _sname, en_reg, _en_bits, _volt, _ops) \
tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 1, _volt, _ops)
#define tps65090_REG_SWITCH(_id, _sname, en_reg, _en_bits, _ops) \
tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 0, 0, _ops)
static struct regulator_desc tps65090_regulator_desc[] = {
tps65090_REG_DESC(DCDC1, "vsys1", 0x0C, BIT(CTRL_EN_BIT),
tps65090_reg_control_ops),
tps65090_REG_DESC(DCDC2, "vsys2", 0x0D, BIT(CTRL_EN_BIT),
tps65090_reg_control_ops),
tps65090_REG_DESC(DCDC3, "vsys3", 0x0E, BIT(CTRL_EN_BIT),
tps65090_reg_control_ops),
tps65090_REG_FIXEDV(DCDC1, "vsys1", 0x0C, BIT(CTRL_EN_BIT), 5000000,
tps65090_reg_control_ops),
tps65090_REG_FIXEDV(DCDC2, "vsys2", 0x0D, BIT(CTRL_EN_BIT), 3300000,
tps65090_reg_control_ops),
tps65090_REG_SWITCH(DCDC3, "vsys3", 0x0E, BIT(CTRL_EN_BIT),
tps65090_reg_control_ops),
tps65090_REG_DESC(FET1, "infet1", 0x0F,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_DESC(FET2, "infet2", 0x10,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_DESC(FET3, "infet3", 0x11,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_DESC(FET4, "infet4", 0x12,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_DESC(FET5, "infet5", 0x13,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_DESC(FET6, "infet6", 0x14,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_DESC(FET7, "infet7", 0x15,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_SWITCH(FET1, "infet1", 0x0F,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_SWITCH(FET2, "infet2", 0x10,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_SWITCH(FET3, "infet3", 0x11,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_SWITCH(FET4, "infet4", 0x12,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_SWITCH(FET5, "infet5", 0x13,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_SWITCH(FET6, "infet6", 0x14,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_SWITCH(FET7, "infet7", 0x15,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_DESC(LDO1, "vsys-l1", 0, 0,
tps65090_ldo_ops),
tps65090_REG_DESC(LDO2, "vsys-l2", 0, 0,
tps65090_ldo_ops),
tps65090_REG_FIXEDV(LDO1, "vsys-l1", 0, 0, 5000000,
tps65090_ldo_ops),
tps65090_REG_FIXEDV(LDO2, "vsys-l2", 0, 0, 3300000,
tps65090_ldo_ops),
};
static inline bool is_dcdc(int id)