From 54d7211da7cd8fbd286532b25f4f0b688fcf94a3 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 12 Oct 2023 15:53:16 +0900 Subject: [PATCH] ata: libata-eh: Spinup disk on resume after revalidation Move the call to ata_dev_power_set_active() to transition a disk in standby power mode to the active power mode from ata_eh_revalidate_and_attach() before doing revalidation to the end of ata_eh_recover(), after the link speed for the device is reconfigured (if that was necessary). This is safer as this ensure that the VERIFY command executed to spinup the disk is executed with the drive properly reconfigured first. Signed-off-by: Damien Le Moal Reviewed-by: Niklas Cassel Tested-by: Geert Uytterhoeven --- drivers/ata/libata-eh.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 945675f6b822..b0d6e69c4a5b 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -3051,15 +3051,6 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, if (ehc->i.flags & ATA_EHI_DID_RESET) readid_flags |= ATA_READID_POSTRESET; - /* - * When resuming, before executing any command, make sure to - * transition the device to the active power mode. - */ - if ((action & ATA_EH_SET_ACTIVE) && ata_dev_enabled(dev)) { - ata_dev_power_set_active(dev); - ata_eh_done(link, dev, ATA_EH_SET_ACTIVE); - } - if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) { WARN_ON(dev->class == ATA_DEV_PMP); @@ -3856,6 +3847,17 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, } } + /* + * Make sure to transition devices to the active power mode + * if needed (e.g. if we were scheduled on system resume). + */ + ata_for_each_dev(dev, link, ENABLED) { + if (ehc->i.dev_action[dev->devno] & ATA_EH_SET_ACTIVE) { + ata_dev_power_set_active(dev); + ata_eh_done(link, dev, ATA_EH_SET_ACTIVE); + } + } + /* retry flush if necessary */ ata_for_each_dev(dev, link, ALL) { if (dev->class != ATA_DEV_ATA &&