scsi: remove NCR_D700 driver
The NCR DUAL 700 SCSI driver depends on microchannel support, but
microchannel support was removed from the kernel with commit bb8187d35f
("MCA: delete all remaining traces of microchannel bus support.") over 6
years ago.
So zap the D700 SCSI driver as well.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit is contained in:
Johannes Thumshirn
Martin K. Petersen
parent
78adb2bc9f
commit
54e45716a8
@ -9750,12 +9750,6 @@ F: drivers/scsi/mac_scsi.*
|
||||
F: drivers/scsi/sun3_scsi.*
|
||||
F: drivers/scsi/sun3_scsi_vme.c
|
||||
|
||||
NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
|
||||
M: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
|
||||
L: linux-scsi@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/scsi/NCR_D700.*
|
||||
|
||||
NCT6775 HARDWARE MONITOR DRIVER
|
||||
M: Guenter Roeck <linux@roeck-us.net>
|
||||
L: linux-hwmon@vger.kernel.org
|
||||
|
||||
@ -842,18 +842,6 @@ config SCSI_IZIP_SLOW_CTR
|
||||
|
||||
Generally, saying N is fine.
|
||||
|
||||
config SCSI_NCR_D700
|
||||
tristate "NCR Dual 700 MCA SCSI support"
|
||||
depends on MCA && SCSI
|
||||
select SCSI_SPI_ATTRS
|
||||
help
|
||||
This is a driver for the MicroChannel Dual 700 card produced by
|
||||
NCR and commonly used in 345x/35xx/4100 class machines. It always
|
||||
tries to negotiate sync and uses tag command queueing.
|
||||
|
||||
Unless you have an NCR manufactured machine, the chances are that
|
||||
you do not have this SCSI card, so say N.
|
||||
|
||||
config SCSI_LASI700
|
||||
tristate "HP Lasi SCSI support for 53c700/710"
|
||||
depends on GSC && SCSI
|
||||
|
||||
@ -76,7 +76,6 @@ obj-$(CONFIG_SCSI_PM8001) += pm8001/
|
||||
obj-$(CONFIG_SCSI_ISCI) += isci/
|
||||
obj-$(CONFIG_SCSI_IPS) += ips.o
|
||||
obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
|
||||
obj-$(CONFIG_SCSI_NCR_D700) += 53c700.o NCR_D700.o
|
||||
obj-$(CONFIG_SCSI_NCR_Q720) += NCR_Q720_mod.o
|
||||
obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o
|
||||
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
|
||||
|
||||
@ -1,405 +0,0 @@
|
||||
/* -*- mode: c; c-basic-offset: 8 -*- */
|
||||
|
||||
/* NCR Dual 700 MCA SCSI Driver
|
||||
*
|
||||
* Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
|
||||
**-----------------------------------------------------------------------------
|
||||
**
|
||||
** This program is free software; you can redistribute it and/or modify
|
||||
** it under the terms of the GNU General Public License as published by
|
||||
** the Free Software Foundation; either version 2 of the License, or
|
||||
** (at your option) any later version.
|
||||
**
|
||||
** This program is distributed in the hope that it will be useful,
|
||||
** but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
** GNU General Public License for more details.
|
||||
**
|
||||
** You should have received a copy of the GNU General Public License
|
||||
** along with this program; if not, write to the Free Software
|
||||
** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
**
|
||||
**-----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
/* Notes:
|
||||
*
|
||||
* Most of the work is done in the chip specific module, 53c700.o
|
||||
*
|
||||
* TODO List:
|
||||
*
|
||||
* 1. Extract the SCSI ID from the voyager CMOS table (necessary to
|
||||
* support multi-host environments.
|
||||
*
|
||||
* */
|
||||
|
||||
|
||||
/* CHANGELOG
|
||||
*
|
||||
* Version 2.2
|
||||
*
|
||||
* Added mca_set_adapter_name().
|
||||
*
|
||||
* Version 2.1
|
||||
*
|
||||
* Modularise the driver into a Board piece (this file) and a chip
|
||||
* piece 53c700.[ch] and 53c700.scr, added module options. You can
|
||||
* now specify the scsi id by the parameters
|
||||
*
|
||||
* NCR_D700=slot:<n> [siop:<n>] id:<n> ....
|
||||
*
|
||||
* They need to be comma separated if compiled into the kernel
|
||||
*
|
||||
* Version 2.0
|
||||
*
|
||||
* Initial implementation of TCQ (Tag Command Queueing). TCQ is full
|
||||
* featured and uses the clock algorithm to keep track of outstanding
|
||||
* tags and guard against individual tag starvation. Also fixed a bug
|
||||
* in all of the 1.x versions where the D700_data_residue() function
|
||||
* was returning results off by 32 bytes (and thus causing the same 32
|
||||
* bytes to be written twice corrupting the data block). It turns out
|
||||
* the 53c700 only has a 6 bit DBC and DFIFO registers not 7 bit ones
|
||||
* like the 53c710 (The 710 is the only data manual still available,
|
||||
* which I'd been using to program the 700).
|
||||
*
|
||||
* Version 1.2
|
||||
*
|
||||
* Much improved message handling engine
|
||||
*
|
||||
* Version 1.1
|
||||
*
|
||||
* Add code to handle selection reasonably correctly. By the time we
|
||||
* get the selection interrupt, we've already responded, but drop off the
|
||||
* bus and hope the selector will go away.
|
||||
*
|
||||
* Version 1.0:
|
||||
*
|
||||
* Initial release. Fully functional except for procfs and tag
|
||||
* command queueing. Has only been tested on cards with 53c700-66
|
||||
* chips and only single ended. Features are
|
||||
*
|
||||
* 1. Synchronous data transfers to offset 8 (limit of 700-66) and
|
||||
* 100ns (10MHz) limit of SCSI-2
|
||||
*
|
||||
* 2. Disconnection and reselection
|
||||
*
|
||||
* Testing:
|
||||
*
|
||||
* I've only really tested this with the 700-66 chip, but have done
|
||||
* soak tests in multi-device environments to verify that
|
||||
* disconnections and reselections are being processed correctly.
|
||||
* */
|
||||
|
||||
#define NCR_D700_VERSION "2.2"
|
||||
|
||||
#include <linux/blkdev.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/mca.h>
|
||||
#include <linux/slab.h>
|
||||
#include <asm/io.h>
|
||||
#include <scsi/scsi_host.h>
|
||||
#include <scsi/scsi_device.h>
|
||||
#include <scsi/scsi_transport.h>
|
||||
#include <scsi/scsi_transport_spi.h>
|
||||
|
||||
#include "53c700.h"
|
||||
#include "NCR_D700.h"
|
||||
|
||||
static char *NCR_D700; /* command line from insmod */
|
||||
|
||||
MODULE_AUTHOR("James Bottomley");
|
||||
MODULE_DESCRIPTION("NCR Dual700 SCSI Driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
module_param(NCR_D700, charp, 0);
|
||||
|
||||
static __u8 id_array[2*(MCA_MAX_SLOT_NR + 1)] =
|
||||
{ [0 ... 2*(MCA_MAX_SLOT_NR + 1)-1] = 7 };
|
||||
|
||||
#ifdef MODULE
|
||||
#define ARG_SEP ' '
|
||||
#else
|
||||
#define ARG_SEP ','
|
||||
#endif
|
||||
|
||||
static int __init
|
||||
param_setup(char *string)
|
||||
{
|
||||
char *pos = string, *next;
|
||||
int slot = -1, siop = -1;
|
||||
|
||||
while(pos != NULL && (next = strchr(pos, ':')) != NULL) {
|
||||
int val = (int)simple_strtoul(++next, NULL, 0);
|
||||
|
||||
if(!strncmp(pos, "slot:", 5))
|
||||
slot = val;
|
||||
else if(!strncmp(pos, "siop:", 5))
|
||||
siop = val;
|
||||
else if(!strncmp(pos, "id:", 3)) {
|
||||
if(slot == -1) {
|
||||
printk(KERN_WARNING "NCR D700: Must specify slot for id parameter\n");
|
||||
} else if(slot > MCA_MAX_SLOT_NR) {
|
||||
printk(KERN_WARNING "NCR D700: Illegal slot %d for id %d\n", slot, val);
|
||||
} else {
|
||||
if(siop != 0 && siop != 1) {
|
||||
id_array[slot*2] = val;
|
||||
id_array[slot*2 + 1] =val;
|
||||
} else {
|
||||
id_array[slot*2 + siop] = val;
|
||||
}
|
||||
}
|
||||
}
|
||||
if((pos = strchr(pos, ARG_SEP)) != NULL)
|
||||
pos++;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
/* Host template. The 53c700 routine NCR_700_detect will
|
||||
* fill in all of the missing routines */
|
||||
static struct scsi_host_template NCR_D700_driver_template = {
|
||||
.module = THIS_MODULE,
|
||||
.name = "NCR Dual 700 MCA",
|
||||
.proc_name = "NCR_D700",
|
||||
.this_id = 7,
|
||||
};
|
||||
|
||||
/* We needs this helper because we have two hosts per struct device */
|
||||
struct NCR_D700_private {
|
||||
struct device *dev;
|
||||
struct Scsi_Host *hosts[2];
|
||||
char name[30];
|
||||
char pad;
|
||||
};
|
||||
|
||||
static int
|
||||
NCR_D700_probe_one(struct NCR_D700_private *p, int siop, int irq,
|
||||
int slot, u32 region, int differential)
|
||||
{
|
||||
struct NCR_700_Host_Parameters *hostdata;
|
||||
struct Scsi_Host *host;
|
||||
int ret;
|
||||
|
||||
hostdata = kzalloc(sizeof(*hostdata), GFP_KERNEL);
|
||||
if (!hostdata) {
|
||||
printk(KERN_ERR "NCR D700: SIOP%d: Failed to allocate host"
|
||||
"data, detatching\n", siop);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
if (!request_region(region, 64, "NCR_D700")) {
|
||||
printk(KERN_ERR "NCR D700: Failed to reserve IO region 0x%x\n",
|
||||
region);
|
||||
ret = -ENODEV;
|
||||
goto region_failed;
|
||||
}
|
||||
|
||||
/* Fill in the three required pieces of hostdata */
|
||||
hostdata->base = ioport_map(region, 64);
|
||||
hostdata->differential = (((1<<siop) & differential) != 0);
|
||||
hostdata->clock = NCR_D700_CLOCK_MHZ;
|
||||
hostdata->burst_length = 8;
|
||||
|
||||
/* and register the siop */
|
||||
host = NCR_700_detect(&NCR_D700_driver_template, hostdata, p->dev);
|
||||
if (!host) {
|
||||
ret = -ENOMEM;
|
||||
goto detect_failed;
|
||||
}
|
||||
|
||||
p->hosts[siop] = host;
|
||||
/* FIXME: read this from SUS */
|
||||
host->this_id = id_array[slot * 2 + siop];
|
||||
host->irq = irq;
|
||||
host->base = region;
|
||||
scsi_scan_host(host);
|
||||
|
||||
return 0;
|
||||
|
||||
detect_failed:
|
||||
release_region(region, 64);
|
||||
region_failed:
|
||||
kfree(hostdata);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static irqreturn_t
|
||||
NCR_D700_intr(int irq, void *data)
|
||||
{
|
||||
struct NCR_D700_private *p = (struct NCR_D700_private *)data;
|
||||
int i, found = 0;
|
||||
|
||||
for (i = 0; i < 2; i++)
|
||||
if (p->hosts[i] &&
|
||||
NCR_700_intr(irq, p->hosts[i]) == IRQ_HANDLED)
|
||||
found++;
|
||||
|
||||
return found ? IRQ_HANDLED : IRQ_NONE;
|
||||
}
|
||||
|
||||
/* Detect a D700 card. Note, because of the setup --- the chips are
|
||||
* essentially connectecd to the MCA bus independently, it is easier
|
||||
* to set them up as two separate host adapters, rather than one
|
||||
* adapter with two channels */
|
||||
static int
|
||||
NCR_D700_probe(struct device *dev)
|
||||
{
|
||||
struct NCR_D700_private *p;
|
||||
int differential;
|
||||
static int banner = 1;
|
||||
struct mca_device *mca_dev = to_mca_device(dev);
|
||||
int slot = mca_dev->slot;
|
||||
int found = 0;
|
||||
int irq, i;
|
||||
int pos3j, pos3k, pos3a, pos3b, pos4;
|
||||
__u32 base_addr, offset_addr;
|
||||
|
||||
/* enable board interrupt */
|
||||
pos4 = mca_device_read_pos(mca_dev, 4);
|
||||
pos4 |= 0x4;
|
||||
mca_device_write_pos(mca_dev, 4, pos4);
|
||||
|
||||
mca_device_write_pos(mca_dev, 6, 9);
|
||||
pos3j = mca_device_read_pos(mca_dev, 3);
|
||||
mca_device_write_pos(mca_dev, 6, 10);
|
||||
pos3k = mca_device_read_pos(mca_dev, 3);
|
||||
mca_device_write_pos(mca_dev, 6, 0);
|
||||
pos3a = mca_device_read_pos(mca_dev, 3);
|
||||
mca_device_write_pos(mca_dev, 6, 1);
|
||||
pos3b = mca_device_read_pos(mca_dev, 3);
|
||||
|
||||
base_addr = ((pos3j << 8) | pos3k) & 0xfffffff0;
|
||||
offset_addr = ((pos3a << 8) | pos3b) & 0xffffff70;
|
||||
|
||||
irq = (pos4 & 0x3) + 11;
|
||||
if(irq >= 13)
|
||||
irq++;
|
||||
if(banner) {
|
||||
printk(KERN_NOTICE "NCR D700: Driver Version " NCR_D700_VERSION "\n"
|
||||
"NCR D700: Copyright (c) 2001 by James.Bottomley@HansenPartnership.com\n"
|
||||
"NCR D700:\n");
|
||||
banner = 0;
|
||||
}
|
||||
/* now do the bus related transforms */
|
||||
irq = mca_device_transform_irq(mca_dev, irq);
|
||||
base_addr = mca_device_transform_ioport(mca_dev, base_addr);
|
||||
offset_addr = mca_device_transform_ioport(mca_dev, offset_addr);
|
||||
|
||||
printk(KERN_NOTICE "NCR D700: found in slot %d irq = %d I/O base = 0x%x\n", slot, irq, offset_addr);
|
||||
|
||||
/*outb(BOARD_RESET, base_addr);*/
|
||||
|
||||
/* clear any pending interrupts */
|
||||
(void)inb(base_addr + 0x08);
|
||||
/* get modctl, used later for setting diff bits */
|
||||
switch(differential = (inb(base_addr + 0x08) >> 6)) {
|
||||
case 0x00:
|
||||
/* only SIOP1 differential */
|
||||
differential = 0x02;
|
||||
break;
|
||||
case 0x01:
|
||||
/* Both SIOPs differential */
|
||||
differential = 0x03;
|
||||
break;
|
||||
case 0x03:
|
||||
/* No SIOPs differential */
|
||||
differential = 0x00;
|
||||
break;
|
||||
default:
|
||||
printk(KERN_ERR "D700: UNEXPECTED DIFFERENTIAL RESULT 0x%02x\n",
|
||||
differential);
|
||||
differential = 0x00;
|
||||
break;
|
||||
}
|
||||
|
||||
p = kzalloc(sizeof(*p), GFP_KERNEL);
|
||||
if (!p)
|
||||
return -ENOMEM;
|
||||
|
||||
p->dev = dev;
|
||||
snprintf(p->name, sizeof(p->name), "D700(%s)", dev_name(dev));
|
||||
if (request_irq(irq, NCR_D700_intr, IRQF_SHARED, p->name, p)) {
|
||||
printk(KERN_ERR "D700: request_irq failed\n");
|
||||
kfree(p);
|
||||
return -EBUSY;
|
||||
}
|
||||
/* plumb in both 700 chips */
|
||||
for (i = 0; i < 2; i++) {
|
||||
int err;
|
||||
|
||||
if ((err = NCR_D700_probe_one(p, i, irq, slot,
|
||||
offset_addr + (0x80 * i),
|
||||
differential)) != 0)
|
||||
printk("D700: SIOP%d: probe failed, error = %d\n",
|
||||
i, err);
|
||||
else
|
||||
found++;
|
||||
}
|
||||
|
||||
if (!found) {
|
||||
kfree(p);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
mca_device_set_claim(mca_dev, 1);
|
||||
mca_device_set_name(mca_dev, "NCR_D700");
|
||||
dev_set_drvdata(dev, p);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
NCR_D700_remove_one(struct Scsi_Host *host)
|
||||
{
|
||||
scsi_remove_host(host);
|
||||
NCR_700_release(host);
|
||||
kfree((struct NCR_700_Host_Parameters *)host->hostdata[0]);
|
||||
free_irq(host->irq, host);
|
||||
release_region(host->base, 64);
|
||||
}
|
||||
|
||||
static int
|
||||
NCR_D700_remove(struct device *dev)
|
||||
{
|
||||
struct NCR_D700_private *p = dev_get_drvdata(dev);
|
||||
int i;
|
||||
|
||||
for (i = 0; i < 2; i++)
|
||||
NCR_D700_remove_one(p->hosts[i]);
|
||||
|
||||
kfree(p);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static short NCR_D700_id_table[] = { NCR_D700_MCA_ID, 0 };
|
||||
|
||||
static struct mca_driver NCR_D700_driver = {
|
||||
.id_table = NCR_D700_id_table,
|
||||
.driver = {
|
||||
.name = "NCR_D700",
|
||||
.bus = &mca_bus_type,
|
||||
.probe = NCR_D700_probe,
|
||||
.remove = NCR_D700_remove,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init NCR_D700_init(void)
|
||||
{
|
||||
#ifdef MODULE
|
||||
if (NCR_D700)
|
||||
param_setup(NCR_D700);
|
||||
#endif
|
||||
|
||||
return mca_register_driver(&NCR_D700_driver);
|
||||
}
|
||||
|
||||
static void __exit NCR_D700_exit(void)
|
||||
{
|
||||
mca_unregister_driver(&NCR_D700_driver);
|
||||
}
|
||||
|
||||
module_init(NCR_D700_init);
|
||||
module_exit(NCR_D700_exit);
|
||||
|
||||
__setup("NCR_D700=", param_setup);
|
||||
@ -1,30 +0,0 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/* -*- mode: c; c-basic-offset: 8 -*- */
|
||||
|
||||
/* NCR Dual 700 MCA SCSI Driver
|
||||
*
|
||||
* Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
|
||||
*/
|
||||
|
||||
#ifndef _NCR_D700_H
|
||||
#define _NCR_D700_H
|
||||
|
||||
/* Don't turn on debugging messages */
|
||||
#undef NCR_D700_DEBUG
|
||||
|
||||
/* The MCA identifier */
|
||||
#define NCR_D700_MCA_ID 0x0092
|
||||
|
||||
/* Defines for the Board registers */
|
||||
#define BOARD_RESET 0x80 /* board level reset */
|
||||
#define ADD_PARENB 0x04 /* Address Parity Enabled */
|
||||
#define DAT_PARENB 0x01 /* Data Parity Enabled */
|
||||
#define SFBK_ENB 0x10 /* SFDBK Interrupt Enabled */
|
||||
#define LED0GREEN 0x20 /* Led 0 (red 0; green 1) */
|
||||
#define LED1GREEN 0x40 /* Led 1 (red 0; green 1) */
|
||||
#define LED0RED 0xDF /* Led 0 (red 0; green 1) */
|
||||
#define LED1RED 0xBF /* Led 1 (red 0; green 1) */
|
||||
|
||||
#define NCR_D700_CLOCK_MHZ 50
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user