iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

riscv: dts: starfive: Enable SDIO wifi on JH7100 boards

Browse Source 
Add pinctrl and MMC controller nodes for the Broadcom wifi controller
on the BeagleV Starlight and StarFive VisionFive V1 boards.

Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
This commit is contained in:
Emil Renner Berthing 2023-11-30 16:19:32 +01:00 committed by Conor Dooley
parent c548409cfe
commit 56b10953da
1 changed files with 60 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

60
arch/riscv/boot/dts/starfive/jh7100-common.dtsi
View File

@ -13,6 +13,7 @@
/ {
aliases {
mmc0 = &sdio0;
mmc1 = &sdio1;
serial0 = &uart3;
};
@ -64,6 +65,11 @@
<0x00 0xfa000000 0x10 0x7a000000 0x00 0x01000000>,
<0x00 0xfb000000 0x00 0xfb000000 0x07 0x85000000>;
};
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
};
&gpio {
@ -146,6 +152,41 @@
};
};
sdio1_pins: sdio1-0 {
clk-pins {
pinmux = <GPIOMUX(33, GPO_SDIO1_PAD_CCLK_OUT,
GPO_ENABLE, GPI_NONE)>;
bias-disable;
input-disable;
input-schmitt-disable;
};
sdio-pins {
pinmux = <GPIOMUX(29,
GPO_SDIO1_PAD_CCMD_OUT,
GPO_SDIO1_PAD_CCMD_OEN,
GPI_SDIO1_PAD_CCMD_IN)>,
<GPIOMUX(36,
GPO_SDIO1_PAD_CDATA_OUT_BIT0,
GPO_SDIO1_PAD_CDATA_OEN_BIT0,
GPI_SDIO1_PAD_CDATA_IN_BIT0)>,
<GPIOMUX(30,
GPO_SDIO1_PAD_CDATA_OUT_BIT1,
GPO_SDIO1_PAD_CDATA_OEN_BIT1,
GPI_SDIO1_PAD_CDATA_IN_BIT1)>,
<GPIOMUX(34,
GPO_SDIO1_PAD_CDATA_OUT_BIT2,
GPO_SDIO1_PAD_CDATA_OEN_BIT2,
GPI_SDIO1_PAD_CDATA_IN_BIT2)>,
<GPIOMUX(31,
GPO_SDIO1_PAD_CDATA_OUT_BIT3,
GPO_SDIO1_PAD_CDATA_OEN_BIT3,
GPI_SDIO1_PAD_CDATA_IN_BIT3)>;
bias-pull-up;
input-enable;
input-schmitt-enable;
};
};
uart3_pins: uart3-0 {
rx-pins {
pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
@ -225,6 +266,25 @@
status = "okay";
};
&sdio1 {
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
cap-power-off-card;
mmc-pwrseq = <&wifi_pwrseq>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdio1_pins>;
status = "okay";
wifi@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
};
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;