iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

arm64: tegra: Add PCIe host bridge on Tegra210

Browse Source 
Add the PCIe host bridge found on Tegra X1. It implements two root ports
that support x4 and x1 configurations, respectively.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
This commit is contained in:
Thierry Reding 2016-11-25 11:57:17 +01:00 committed by Bjorn Helgaas
parent 7ac0271397
commit 589a2d3f18
1 changed files with 63 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

63
arch/arm64/boot/dts/nvidia/tegra210.dtsi
View File

@ -11,6 +11,69 @@
#address-cells = <2>;
#size-cells = <2>;
pcie-controller@01003000 {
compatible = "nvidia,tegra210-pcie";
device_type = "pci";
reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
0x0 0x01003800 0x0 0x00000800 /* AFI registers */
0x0 0x02000000 0x0 0x10000000>; /* configuration space */
reg-names = "pads", "afi", "cs";
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
interrupt-names = "intr", "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */
0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */
0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */
0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */
0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
clocks = <&tegra_car TEGRA210_CLK_PCIE>,
<&tegra_car TEGRA210_CLK_AFI>,
<&tegra_car TEGRA210_CLK_PLL_E>,
<&tegra_car TEGRA210_CLK_CML0>;
clock-names = "pex", "afi", "pll_e", "cml";
resets = <&tegra_car 70>,
<&tegra_car 72>,
<&tegra_car 74>;
reset-names = "pex", "afi", "pcie_x";
status = "disabled";
pci@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
reg = <0x000800 0 0 0 0>;
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
ranges;
nvidia,num-lanes = <4>;
};
pci@2,0 {
device_type = "pci";
assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
reg = <0x001000 0 0 0 0>;
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
ranges;
nvidia,num-lanes = <1>;
};
};
host1x@50000000 {
compatible = "nvidia,tegra210-host1x", "simple-bus";
reg = <0x0 0x50000000 0x0 0x00034000>;