remoteproc: Move resource table load logic to find

Extend the previous operation of finding the resource table in the ELF
with the extra step of populating the rproc struct with a copy and the
size. This allows drivers to override the mechanism used for acquiring
the resource table, or omit it for firmware that is known not to have a
resource table.

This leaves the custom, dummy, find_rsc_table implementations found in
some drivers dangling.

Reviewed-By: Loic Pallardy <loic.pallardy@st.com>
Tested-By: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

drivers/remoteproc/remoteproc_core.c

@@ -907,8 +907,7 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 {
 	struct device *dev = &rproc->dev;
 	const char *name = rproc->firmware;
-	struct resource_table *table;
+	int ret;
-	int ret, tablesz;
 
 	ret = rproc_fw_sanity_check(rproc, fw);
 	if (ret)
@@ -927,27 +926,11 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 	}
 
 	rproc->bootaddr = rproc_get_boot_addr(rproc, fw);
-	ret = -EINVAL;
 
-	/* look for the resource table */
+	/* load resource table */
-	table = rproc_find_rsc_table(rproc, fw, &tablesz);
+	ret = rproc_load_rsc_table(rproc, fw);
-	if (!table) {
+	if (ret)
-		dev_err(dev, "Failed to find resource table\n");
+		goto disable_iommu;
-		goto clean_up;
-	}
-
-	/*
-	 * Create a copy of the resource table. When a virtio device starts
-	 * and calls vring_new_virtqueue() the address of the allocated vring
-	 * will be stored in the cached_table. Before the device is started,
-	 * cached_table will be copied into device memory.
-	 */
-	rproc->cached_table = kmemdup(table, tablesz, GFP_KERNEL);
-	if (!rproc->cached_table)
-		goto clean_up;
-
-	rproc->table_ptr = rproc->cached_table;
-	rproc->table_sz = tablesz;
 
 	/* reset max_notifyid */
 	rproc->max_notifyid = -1;
@@ -967,11 +950,10 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 
 clean_up_resources:
 	rproc_resource_cleanup(rproc);
-clean_up:
 	kfree(rproc->cached_table);
 	rproc->cached_table = NULL;
 	rproc->table_ptr = NULL;
-
+disable_iommu:
 	rproc_disable_iommu(rproc);
 	return ret;
 }
@@ -1443,7 +1425,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
 	/* Default to ELF loader if no load function is specified */
 	if (!rproc->ops->load) {
 		rproc->ops->load = rproc_elf_load_segments;
-		rproc->ops->find_rsc_table = rproc_elf_find_rsc_table;
+		rproc->ops->load_rsc_table = rproc_elf_load_rsc_table;
 		rproc->ops->find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table;
 		rproc->ops->sanity_check = rproc_elf_sanity_check;
 		rproc->ops->get_boot_addr = rproc_elf_get_boot_addr;

drivers/remoteproc/remoteproc_elf_loader.c

@@ -268,42 +268,49 @@ find_table(struct device *dev, struct elf32_hdr *ehdr, size_t fw_size)
 }
 
 /**
- * rproc_elf_find_rsc_table() - find the resource table
+ * rproc_elf_load_rsc_table() - load the resource table
  * @rproc: the rproc handle
  * @fw: the ELF firmware image
- * @tablesz: place holder for providing back the table size
  *
  * This function finds the resource table inside the remote processor's
- * firmware. It is used both upon the registration of @rproc (in order
+ * firmware, load it into the @cached_table and update @table_ptr.
- * to look for and register the supported virito devices), and when the
- * @rproc is booted.
  *
- * Returns the pointer to the resource table if it is found, and write its
+ * Return: 0 on success, negative errno on failure.
- * size into @tablesz. If a valid table isn't found, NULL is returned
- * (and @tablesz isn't set).
  */
-struct resource_table *rproc_elf_find_rsc_table(struct rproc *rproc,
+int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw)
-						const struct firmware *fw,
-						int *tablesz)
 {
 	struct elf32_hdr *ehdr;
 	struct elf32_shdr *shdr;
 	struct device *dev = &rproc->dev;
 	struct resource_table *table = NULL;
 	const u8 *elf_data = fw->data;
+	size_t tablesz;
 
 	ehdr = (struct elf32_hdr *)elf_data;
 
 	shdr = find_table(dev, ehdr, fw->size);
 	if (!shdr)
-		return NULL;
+		return -EINVAL;
 
 	table = (struct resource_table *)(elf_data + shdr->sh_offset);
-	*tablesz = shdr->sh_size;
+	tablesz = shdr->sh_size;
 
-	return table;
+	/*
+	 * Create a copy of the resource table. When a virtio device starts
+	 * and calls vring_new_virtqueue() the address of the allocated vring
+	 * will be stored in the cached_table. Before the device is started,
+	 * cached_table will be copied into device memory.
+	 */
+	rproc->cached_table = kmemdup(table, tablesz, GFP_KERNEL);
+	if (!rproc->cached_table)
+		return -ENOMEM;
+
+	rproc->table_ptr = rproc->cached_table;
+	rproc->table_sz = tablesz;
+
+	return 0;
 }
-EXPORT_SYMBOL(rproc_elf_find_rsc_table);
+EXPORT_SYMBOL(rproc_elf_load_rsc_table);
 
 /**
  * rproc_elf_find_loaded_rsc_table() - find the loaded resource table

drivers/remoteproc/remoteproc_internal.h

@@ -57,9 +57,7 @@ int rproc_trigger_recovery(struct rproc *rproc);
 int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw);
 u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
 int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw);
-struct resource_table *rproc_elf_find_rsc_table(struct rproc *rproc,
+int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw);
-						const struct firmware *fw,
-						int *tablesz);
 struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
 						       const struct firmware *fw);
 
@@ -90,15 +88,13 @@ int rproc_load_segments(struct rproc *rproc, const struct firmware *fw)
 	return -EINVAL;
 }
 
-static inline
+static inline int rproc_load_rsc_table(struct rproc *rproc,
-struct resource_table *rproc_find_rsc_table(struct rproc *rproc,
+				       const struct firmware *fw)
-					    const struct firmware *fw,
-					    int *tablesz)
 {
-	if (rproc->ops->find_rsc_table)
+	if (rproc->ops->load_rsc_table)
-		return rproc->ops->find_rsc_table(rproc, fw, tablesz);
+		return rproc->ops->load_rsc_table(rproc, fw);
 
-	return NULL;
+	return 0;
 }
 
 static inline

include/linux/remoteproc.h

@@ -332,6 +332,7 @@ struct firmware;
  * @stop:	power off the device
  * @kick:	kick a virtqueue (virtqueue id given as a parameter)
  * @da_to_va:	optional platform hook to perform address translations
+ * @load_rsc_table:	load resource table from firmware image
  * @find_rsc_table:	find the resource table inside the firmware image
  * @find_loaded_rsc_table: find the loaded resouce table
  * @load:		load firmeware to memory, where the remote processor
@@ -344,6 +345,7 @@ struct rproc_ops {
 	int (*stop)(struct rproc *rproc);
 	void (*kick)(struct rproc *rproc, int vqid);
 	void * (*da_to_va)(struct rproc *rproc, u64 da, int len);
+	int (*load_rsc_table)(struct rproc *rproc, const struct firmware *fw);
 	struct resource_table *(*find_rsc_table)(struct rproc *rproc,
 						 const struct firmware *fw,
 						 int *tablesz);