iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

staging: rtl8188eu: remove blank lines in header files

Browse Source 
Remove blank lines in header files to clear checkpatch issues.
CHECK: Please don't use multiple blank lines

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200627090600.21354-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Michael Straube 2020-06-27 11:06:00 +02:00 committed by Greg Kroah-Hartman
parent e42f623c3a
commit 5bfb7eadc5
21 changed files with 0 additions and 55 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
drivers/staging/rtl8188eu/include/drv_types.h
View File

@ -10,7 +10,6 @@
------------------------------------------------------------------------------*/
#ifndef __DRV_TYPES_H__
#define __DRV_TYPES_H__

1
drivers/staging/rtl8188eu/include/hal_com.h
View File

@ -137,7 +137,6 @@
#include "HalVerDef.h"
void dump_chip_info(struct HAL_VERSION ChipVersion);
/* return the final channel plan decision */
u8 hal_com_get_channel_plan(u8 hw_channel_plan, u8 sw_channel_plan,
u8 def_channel_plan, bool load_fail);

11
drivers/staging/rtl8188eu/include/ieee80211.h
View File

@ -90,7 +90,6 @@ enum {
#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6
#define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7
#define IEEE_CRYPT_ALG_NAME_LEN 16
#define WPA_CIPHER_NONE BIT(0)
@ -99,8 +98,6 @@ enum {
#define WPA_CIPHER_TKIP BIT(3)
#define WPA_CIPHER_CCMP BIT(4)
#define WPA_SELECTOR_LEN 4
extern u8 RTW_WPA_OUI_TYPE[];
extern u8 WPA_AUTH_KEY_MGMT_NONE[];
@ -113,7 +110,6 @@ extern u8 WPA_CIPHER_SUITE_WRAP[];
extern u8 WPA_CIPHER_SUITE_CCMP[];
extern u8 WPA_CIPHER_SUITE_WEP104[];
#define RSN_HEADER_LEN 4
#define RSN_SELECTOR_LEN 4
@ -192,7 +188,6 @@ enum NETWORK_TYPE {
#define IsSupportedTxMCS(NetType) \
((NetType) & (WIRELESS_11_24N | WIRELESS_11_5N) ? true : false)
struct ieee_param {
u32 cmd;
u8 sta_addr[ETH_ALEN];
@ -270,11 +265,9 @@ struct sta_data {
* WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro)
*/
#define IEEE80211_HLEN 30
#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
/* this is stolen from ipw2200 driver */
#define IEEE_IBSS_MAC_HASH_SIZE 31
@ -297,7 +290,6 @@ enum eap_type {
#define RTW_IEEE80211_SCTL_FRAG 0x000F
#define RTW_IEEE80211_SCTL_SEQ 0xFFF0
#define RTW_ERP_INFO_NON_ERP_PRESENT BIT(0)
#define RTW_ERP_INFO_USE_PROTECTION BIT(1)
#define RTW_ERP_INFO_BARKER_PREAMBLE_MODE BIT(2)
@ -354,7 +346,6 @@ struct ieee80211_snap_hdr {
#define IEEE80211_CCK_RATE_LEN 4
#define IEEE80211_NUM_OFDM_RATESLEN 8
#define IEEE80211_CCK_RATE_1MB 0x02
#define IEEE80211_CCK_RATE_2MB 0x04
#define IEEE80211_CCK_RATE_5MB 0x0B
@ -613,7 +604,6 @@ enum rtw_ieee80211_back_parties {
#define WME_TSPEC_DIRECTION_DOWNLINK 1
#define WME_TSPEC_DIRECTION_BI_DIRECTIONAL 3
#define OUI_BROADCOM 0x00904c /* Broadcom (Epigram) */
#define VENDOR_HT_CAPAB_OUI_TYPE 0x33 /* 00-90-4c:0x33 */
@ -758,7 +748,6 @@ uint rtw_get_rateset_len(u8 *rateset);
struct registry_priv;
int rtw_generate_ie(struct registry_priv *pregistrypriv);
int rtw_get_bit_value_from_ieee_value(u8 val);
bool rtw_is_cckrates_included(u8 *rate);

4
drivers/staging/rtl8188eu/include/odm.h
View File

@ -5,7 +5,6 @@
*
******************************************************************************/
#ifndef __HALDMOUTSRC_H__
#define __HALDMOUTSRC_H__
@ -41,7 +40,6 @@
#define DPK_DELTA_MAPPING_NUM 13
#define index_mapping_HP_NUM 15
/* */
/* 3 PSD Handler */
/* 3============================================================ */
@ -913,7 +911,6 @@ enum dm_dig_op {
#define DM_SCAN_RSSI_TH 0x14 /* scan return issue for LC */
#define DM_false_ALARM_THRESH_LOW 400
#define DM_false_ALARM_THRESH_HIGH 1000
@ -991,7 +988,6 @@ enum dm_dig_op {
/* 3 BB Power Save */
/* 3=========================================================== */
enum dm_1r_cca {
CCA_1R = 0,
CCA_2R = 1,

2
drivers/staging/rtl8188eu/include/odm_debug.h
View File

@ -5,11 +5,9 @@
*
******************************************************************************/
#ifndef __ODM_DBG_H__
#define __ODM_DBG_H__
/* */
/* Define the debug levels */
/* */

3
drivers/staging/rtl8188eu/include/pwrseq.h
View File

@ -43,7 +43,6 @@
#define RTL8188E_TRANS_LPS_TO_ACT_STEPS 15
#define RTL8188E_TRANS_END_STEPS 1
#define RTL8188E_TRANS_CARDEMU_TO_ACT \
/* format
* { offset, cut_msk, cmd, msk, value
@ -179,7 +178,6 @@
{0x0553, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(5), BIT(5)}, \
/*Respond TxOK to scheduler*/
#define RTL8188E_TRANS_LPS_TO_ACT \
/* format
* { offset, cut_msk, cmd, msk,
@ -213,7 +211,6 @@
*/ \
{0xFFFF, PWR_CUT_ALL_MSK, PWR_CMD_END, 0, 0},
extern struct wl_pwr_cfg rtl8188E_power_on_flow
[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS];
extern struct wl_pwr_cfg rtl8188E_radio_off_flow

1
drivers/staging/rtl8188eu/include/pwrseqcmd.h
View File

@ -27,7 +27,6 @@
#define PWR_CUT_G_MSK BIT(7)
#define PWR_CUT_ALL_MSK 0xFF
enum pwrseq_cmd_delat_unit {
PWRSEQ_DELAY_US,
PWRSEQ_DELAY_MS,

2
drivers/staging/rtl8188eu/include/recv_osdep.h
View File

@ -10,11 +10,9 @@
#include <osdep_service.h>
#include <drv_types.h>
int _rtw_init_recv_priv(struct recv_priv *precvpriv, struct adapter *padapter);
void _rtw_free_recv_priv(struct recv_priv *precvpriv);
s32 rtw_recv_entry(struct recv_frame *precv_frame);
int rtw_recv_indicatepkt(struct adapter *adapter,
struct recv_frame *recv_frame);

5
drivers/staging/rtl8188eu/include/rtl8188e_hal.h
View File

@ -7,7 +7,6 @@
#ifndef __RTL8188E_HAL_H__
#define __RTL8188E_HAL_H__
/* include HAL Related header after HAL Related compiling flags */
#include "rtl8188e_spec.h"
#include "hal8188e_phy_reg.h"
@ -78,7 +77,6 @@ enum usb_rx_agg_mode {
#define MAX_TX_REPORT_BUFFER_SIZE 0x0400 /* 1k */
/* BK, BE, VI, VO, HCCA, MANAGEMENT, COMMAND, HIGH, BEACON. */
#define MAX_TX_QUEUE 9
@ -246,7 +244,6 @@ struct hal_data_8188e {
u8 CurrentBW2024GTxPwrIdx;
u8 CurrentBW4024GTxPwrIdx;
/* Read/write are allow for following hardware information variables */
u8 framesync;
u32 framesyncC34;
@ -285,7 +282,6 @@ struct hal_data_8188e {
u8 AntDivCfg;
u8 TRxAntDivType;
u8 bDumpRxPkt;/* for debug */
u8 bDumpTxPkt;/* for debug */
u8 FwRsvdPageStartOffset; /* Reserve page start offset except
@ -335,7 +331,6 @@ void Hal_GetChnlGroup88E(u8 chnl, u8 *group);
void _8051Reset88E(struct adapter *padapter);
void rtl8188e_InitializeFirmwareVars(struct adapter *padapter);
s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy);
/* EFuse */

1
drivers/staging/rtl8188eu/include/rtl8188e_spec.h
View File

@ -18,7 +18,6 @@
#define RXPKT_BUF_SELECT 0xA5
#define DISABLE_TRXPKT_BUF_ACCESS 0x0
/* 0x0000h ~ 0x00FFh System Configuration */
#define REG_SYS_ISO_CTRL 0x0000
#define REG_SYS_FUNC_EN 0x0002

1
drivers/staging/rtl8188eu/include/rtl8188e_xmit.h
View File

@ -50,7 +50,6 @@
#define FSG BIT(27)
#define OWN BIT(31)
/* OFFSET 4 */
#define PKT_OFFSET_SZ 0
#define QSEL_SHT 8

1
drivers/staging/rtl8188eu/include/rtw_debug.h
View File

@ -21,7 +21,6 @@
#define _drv_info_ 8
#define _drv_debug_ 9
#define _module_rtl871x_xmit_c_ BIT(0)
#define _module_xmit_osdep_c_ BIT(1)
#define _module_rtl871x_recv_c_ BIT(2)

2
drivers/staging/rtl8188eu/include/rtw_ioctl.h
View File

@ -10,7 +10,6 @@
#include <osdep_service.h>
#include <drv_types.h>
#ifndef OID_802_11_CAPABILITY
#define OID_802_11_CAPABILITY 0x0d010122
#endif
@ -19,7 +18,6 @@
#define OID_802_11_PMKID 0x0d010123
#endif
/* For DDK-defined OIDs */
#define OID_NDIS_SEG1 0x00010100
#define OID_NDIS_SEG2 0x00010200

1
drivers/staging/rtl8188eu/include/rtw_ioctl_set.h
View File

@ -9,7 +9,6 @@
#include <drv_types.h>
typedef u8 NDIS_802_11_PMKID_VALUE[16];
u8 rtw_set_802_11_authentication_mode(struct adapter *adapt,

3
drivers/staging/rtl8188eu/include/rtw_mlme_ext.h
View File

@ -11,7 +11,6 @@
#include <drv_types.h>
#include <wlan_bssdef.h>
/* Commented by Albert 20101105 */
/* Increase the SURVEY_TO value from 100 to 150 ( 100ms to 150ms ) */
/* The Realtek 8188CE SoftAP will spend around 100ms to send the probe response after receiving the probe request. */
@ -66,7 +65,6 @@
#define _HW_STATE_STATION_ 0x02
#define _HW_STATE_AP_ 0x03
#define _1M_RATE_ 0
#define _2M_RATE_ 1
#define _5M_RATE_ 2
@ -681,7 +679,6 @@ enum rtw_c2h_event {
MAX_C2HEVT
};
#ifdef _RTW_MLME_EXT_C_
static struct fwevent wlanevents[] = {

3
drivers/staging/rtl8188eu/include/rtw_recv.h
View File

@ -10,7 +10,6 @@
#include <osdep_service.h>
#include <drv_types.h>
#define NR_RECVFRAME 256
#define RXFRAME_ALIGN 8
@ -127,7 +126,6 @@ struct rx_pkt_attrib {
struct phy_info phy_info;
};
/* These definition is used for Rx packet reordering. */
#define SN_LESS(a, b) (((a - b) & 0x800) != 0)
#define SN_EQUAL(a, b) (a == b)
@ -254,7 +252,6 @@ static inline s32 translate_percentage_to_dbm(u32 sig_stren_index)
return power;
}
struct sta_info;
void _rtw_init_sta_recv_priv(struct sta_recv_priv *psta_recvpriv);

1
drivers/staging/rtl8188eu/include/rtw_rf.h
View File

@ -114,5 +114,4 @@ enum rt_rf_type_def {
u32 rtw_ch2freq(u32 ch);
#endif /* _RTL8711_RF_H_ */

3
drivers/staging/rtl8188eu/include/rtw_security.h
View File

@ -37,7 +37,6 @@ enum {
ENCRYP_PROTOCOL_MAX
};
#ifndef Ndis802_11AuthModeWPA2
#define Ndis802_11AuthModeWPA2 (Ndis802_11AuthModeWPANone + 1)
#endif
@ -209,7 +208,6 @@ do { \
} \
} while (0)
#define GET_TKIP_PN(iv, dot11txpn) \
do { \
dot11txpn._byte_.TSC0 = iv[2]; \
@ -220,7 +218,6 @@ do { \
dot11txpn._byte_.TSC5 = iv[7]; \
} while (0)
#define ROL32(A, n) (((A) << (n)) | (((A)>>(32-(n))) & ((1UL << (n)) - 1)))
#define ROR32(A, n) ROL32((A), 32-(n))

1
drivers/staging/rtl8188eu/include/rtw_xmit.h
View File

@ -46,7 +46,6 @@ do {\
dot11txpn.val = (dot11txpn.val == 0xffffff) ? 0 : (dot11txpn.val+1);\
} while (0)
#define TKIP_IV(pattrib_iv, dot11txpn, keyidx)\
do {\
pattrib_iv[0] = dot11txpn._byte_.TSC1;\

5
drivers/staging/rtl8188eu/include/wifi.h
View File

@ -160,7 +160,6 @@ enum WIFI_REG_DOMAIN {
#define get_tofr_ds(pframe) ((GetToDs(pframe) << 1) | GetFrDs(pframe))
#define SetMFrag(pbuf) \
*(__le16 *)(pbuf) |= cpu_to_le16(_MORE_FRAG_)
@ -231,7 +230,6 @@ enum WIFI_REG_DOMAIN {
#define SetDuration(pbuf, dur) \
*(__le16 *)((size_t)(pbuf) + 2) = cpu_to_le16(0xffff & (dur))
#define SetPriority(pbuf, tid) \
*(__le16 *)(pbuf) |= cpu_to_le16(tid & 0xf)
@ -384,7 +382,6 @@ static inline int IsFrameTypeCtrl(unsigned char *pframe)
#define _HT_ADD_INFO_IE_ 61 /* _HT_EXTRA_INFO_IE_ */
#define _WAPI_IE_ 68
#define EID_BSSCoexistence 72 /* 20/40 BSS Coexistence */
#define EID_BSSIntolerantChlReport 73
#define _RIC_Descriptor_IE_ 75
@ -452,7 +449,6 @@ static inline int IsFrameTypeCtrl(unsigned char *pframe)
#define _WMM_IE_Length_ 7 /* for WMM STA */
#define _WMM_Para_Element_Length_ 24
/*-----------------------------------------------------------------------------
Below is the definition for 802.11n
------------------------------------------------------------------------------*/
@ -553,7 +549,6 @@ enum ht_cap_ampdu_factor {
*/
#define IEEE80211_MIN_AMPDU_BUF 0x8
#define OP_MODE_PURE 0
#define OP_MODE_MAY_BE_LEGACY_STAS 1
#define OP_MODE_20MHZ_HT_STA_ASSOCED 2

3
drivers/staging/rtl8188eu/include/wlan_bssdef.h
View File

@ -7,7 +7,6 @@
#ifndef __WLAN_BSSDEF_H__
#define __WLAN_BSSDEF_H__
#define MAX_IE_SZ 768
#define NDIS_802_11_LENGTH_SSID 32
@ -62,8 +61,6 @@ struct ndis_802_11_fixed_ie {
u16 Capabilities;
};
struct ndis_802_11_var_ie {
u8 ElementID;
u8 Length;