From ead3d3c5b54f76da79c079e61bacb4279ec56965 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 10 Sep 2022 16:25:50 +0200 Subject: [PATCH 01/15] ALSA: hda: Fix hang at HD-audio codec unbinding due to refcount saturation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We fixed the potential deadlock at dynamic unbinding the HD-audio codec at the commit 7206998f578d ("ALSA: hda: Fix potential deadlock at codec unbinding"), but ironically, this caused another potential deadlock. The current code uses refcount_dec() and waits for the pending task with wait_event for dropping the refcount to 0. This works fine when PCMs are assigned and actually waiting for the refcount drop. Meanwhile, when there was no PCM assigned, the refcount_dec() call itself was supposed to drop to zero -- alas, it doesn't in reality; refcount_dec() complains, spews kernel warning and it saturates instead of dropping to 0, due to the nature of refcount_dec() implementation. This eventually blocks the wait_event() wakeup and the code get stuck there. For avoiding the problem, we call refcount_dec_and_test() and skips the sync-wait if it already reaches to zero. The patch does a slight code reshuffling to make sure to invoke other disconnect calls before the sync-wait, too. Fixes: 7206998f578d ("ALSA: hda: Fix potential deadlock at codec unbinding") Reported-by: Ville Syrjälä Tested-by: Ville Syrjälä Cc: Link: https://lore.kernel.org/r/YxtflWQnslMHVlU7@intel.com Link: https://lore.kernel.org/r/20220910142550.28494-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_bind.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_bind.c b/sound/pci/hda/hda_bind.c index cae9a975cbcc..1a868dd9dc4b 100644 --- a/sound/pci/hda/hda_bind.c +++ b/sound/pci/hda/hda_bind.c @@ -157,10 +157,10 @@ static int hda_codec_driver_remove(struct device *dev) return codec->bus->core.ext_ops->hdev_detach(&codec->core); } - refcount_dec(&codec->pcm_ref); snd_hda_codec_disconnect_pcms(codec); snd_hda_jack_tbl_disconnect(codec); - wait_event(codec->remove_sleep, !refcount_read(&codec->pcm_ref)); + if (!refcount_dec_and_test(&codec->pcm_ref)) + wait_event(codec->remove_sleep, !refcount_read(&codec->pcm_ref)); snd_power_sync_ref(codec->bus->card); if (codec->patch_ops.free) From 4d40ceef4745536289012670103c59264e0fb3ec Mon Sep 17 00:00:00 2001 From: Kai Vehmanen Date: Mon, 12 Sep 2022 21:37:16 +0300 Subject: [PATCH 02/15] ALSA: hda: add Intel 5 Series / 3400 PCI DID Handle 0x3b57 variant with same AZX_DCAPS_INTEL_PCH_NOPM capabilities as 0x3b56. In practise this allow use of HDMI/DP display audio via i915. BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/2751 Signed-off-by: Kai Vehmanen Cc: Link: https://lore.kernel.org/r/20220912183716.2126312-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index b20694fd69de..6f30c374f896 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2550,6 +2550,8 @@ static const struct pci_device_id azx_ids[] = { /* 5 Series/3400 */ { PCI_DEVICE(0x8086, 0x3b56), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM }, + { PCI_DEVICE(0x8086, 0x3b57), + .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM }, /* Poulsbo */ { PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_BASE }, From 3c4d8c24fb6c44f426e447b04800b0ed61a7b5ae Mon Sep 17 00:00:00 2001 From: Mohan Kumar Date: Tue, 13 Sep 2022 11:06:41 +0530 Subject: [PATCH 03/15] ALSA: hda/tegra: set depop delay for tegra Reduce the suspend time by setting depop delay to 10ms for tegra. Signed-off-by: Mohan Kumar Cc: Link: https://lore.kernel.org/r/20220913053641.23299-1-mkumard@nvidia.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 6c209cd26c0c..acaf6b790ee1 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -3984,6 +3984,7 @@ static int tegra_hdmi_init(struct hda_codec *codec) generic_hdmi_init_per_pins(codec); + codec->depop_delay = 10; codec->patch_ops.build_pcms = tegra_hdmi_build_pcms; spec->chmap.ops.chmap_cea_alloc_validate_get_type = nvhdmi_chmap_cea_alloc_validate_get_type; From cbcdf8c4d35cd74aee8581eb2f0453e0ecab7b05 Mon Sep 17 00:00:00 2001 From: huangwenhui Date: Tue, 13 Sep 2022 13:46:22 +0800 Subject: [PATCH 04/15] ALSA: hda/realtek: Add quirk for Huawei WRT-WX9 Fixes headphone and headset microphone detection on Huawei WRT-WX9. Signed-off-by: huangwenhui Cc: Link: https://lore.kernel.org/r/20220913054622.15979-1-huangwenhuia@uniontech.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 38930cf5aace..0996a8fd008c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9569,6 +9569,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD), SND_PCI_QUIRK(0x1849, 0x1233, "ASRock NUC Box 1100", ALC233_FIXUP_NO_AUDIO_JACK), SND_PCI_QUIRK(0x19e5, 0x3204, "Huawei MACH-WX9", ALC256_FIXUP_HUAWEI_MACH_WX9_PINS), + SND_PCI_QUIRK(0x19e5, 0x320f, "Huawei WRT-WX9 ", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1b35, 0x1235, "CZC B20", ALC269_FIXUP_CZC_B20), SND_PCI_QUIRK(0x1b35, 0x1236, "CZC TMI", ALC269_FIXUP_CZC_TMI), SND_PCI_QUIRK(0x1b35, 0x1237, "CZC L101", ALC269_FIXUP_CZC_L101), From f89e409402e2aeb3bc3aa44d2b7a597959e4e6af Mon Sep 17 00:00:00 2001 From: Mohan Kumar Date: Tue, 13 Sep 2022 12:28:18 +0530 Subject: [PATCH 05/15] ALSA: hda: Fix Nvidia dp infoframe Nvidia HDA HW expects infoframe data bytes order same for both HDMI and DP i.e infoframe data starts from 5th bytes offset. As dp infoframe structure has 4th byte as valid infoframe data, use hdmi infoframe structure for nvidia dp infoframe to match HW behvaior. Signed-off-by: Mohan Kumar Cc: Link: https://lore.kernel.org/r/20220913065818.13015-1-mkumard@nvidia.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index acaf6b790ee1..c9d9aa6351ec 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -170,6 +170,8 @@ struct hdmi_spec { bool dyn_pcm_no_legacy; /* hdmi interrupt trigger control flag for Nvidia codec */ bool hdmi_intr_trig_ctrl; + bool nv_dp_workaround; /* workaround DP audio infoframe for Nvidia */ + bool intel_hsw_fixup; /* apply Intel platform-specific fixups */ /* * Non-generic VIA/NVIDIA specific @@ -679,15 +681,24 @@ static void hdmi_pin_setup_infoframe(struct hda_codec *codec, int ca, int active_channels, int conn_type) { + struct hdmi_spec *spec = codec->spec; union audio_infoframe ai; memset(&ai, 0, sizeof(ai)); - if (conn_type == 0) { /* HDMI */ + if ((conn_type == 0) || /* HDMI */ + /* Nvidia DisplayPort: Nvidia HW expects same layout as HDMI */ + (conn_type == 1 && spec->nv_dp_workaround)) { struct hdmi_audio_infoframe *hdmi_ai = &ai.hdmi; - hdmi_ai->type = 0x84; - hdmi_ai->ver = 0x01; - hdmi_ai->len = 0x0a; + if (conn_type == 0) { /* HDMI */ + hdmi_ai->type = 0x84; + hdmi_ai->ver = 0x01; + hdmi_ai->len = 0x0a; + } else {/* Nvidia DP */ + hdmi_ai->type = 0x84; + hdmi_ai->ver = 0x1b; + hdmi_ai->len = 0x11 << 2; + } hdmi_ai->CC02_CT47 = active_channels - 1; hdmi_ai->CA = ca; hdmi_checksum_audio_infoframe(hdmi_ai); @@ -3617,6 +3628,7 @@ static int patch_nvhdmi_2ch(struct hda_codec *codec) spec->pcm_playback.rates = SUPPORTED_RATES; spec->pcm_playback.maxbps = SUPPORTED_MAXBPS; spec->pcm_playback.formats = SUPPORTED_FORMATS; + spec->nv_dp_workaround = true; return 0; } @@ -3756,6 +3768,7 @@ static int patch_nvhdmi(struct hda_codec *codec) spec->chmap.ops.chmap_cea_alloc_validate_get_type = nvhdmi_chmap_cea_alloc_validate_get_type; spec->chmap.ops.chmap_validate = nvhdmi_chmap_validate; + spec->nv_dp_workaround = true; codec->link_down_at_suspend = 1; @@ -3779,6 +3792,7 @@ static int patch_nvhdmi_legacy(struct hda_codec *codec) spec->chmap.ops.chmap_cea_alloc_validate_get_type = nvhdmi_chmap_cea_alloc_validate_get_type; spec->chmap.ops.chmap_validate = nvhdmi_chmap_validate; + spec->nv_dp_workaround = true; codec->link_down_at_suspend = 1; @@ -3993,6 +4007,7 @@ static int tegra_hdmi_init(struct hda_codec *codec) spec->chmap.ops.chmap_cea_alloc_validate_get_type = nvhdmi_chmap_cea_alloc_validate_get_type; spec->chmap.ops.chmap_validate = nvhdmi_chmap_validate; + spec->nv_dp_workaround = true; return 0; } From bdc9b7396f7d4d6533e70fd8d5472f505b5ef58f Mon Sep 17 00:00:00 2001 From: Callum Osmotherly Date: Wed, 14 Sep 2022 18:44:00 +0930 Subject: [PATCH 06/15] ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5570 laptop The Dell Precision 5570 uses the same 4-speakers-on-ALC289 just like the previous Precision 5560. I replicated that patch onto this one, and can confirm that the audio is much better (the woofers are now working); I've tested it on my Dell Precision 5570. Signed-off-by: Callum Osmotherly Cc: Link: https://lore.kernel.org/r/YyGbWM5wEoFMbW2v@piranha Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 0996a8fd008c..e722885da5f6 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9165,6 +9165,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0a9d, "Dell Latitude 5430", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0a9e, "Dell Latitude 5430", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0b19, "Dell XPS 15 9520", ALC289_FIXUP_DUAL_SPK), + SND_PCI_QUIRK(0x1028, 0x0b1a, "Dell Precision 5570", ALC289_FIXUP_DUAL_SPK), SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2), From 1885ff13d4c42910b37a0e3f7c2f182520f4eed1 Mon Sep 17 00:00:00 2001 From: Callum Osmotherly Date: Thu, 15 Sep 2022 22:36:08 +0930 Subject: [PATCH 07/15] ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop Just as with the 5570 (and the other Dell laptops), this enables the two subwoofer speakers on the Dell Precision 5530 together with the main ones, significantly increasing the audio quality. I've tested this myself on a 5530 and can confirm it's working as expected. Signed-off-by: Callum Osmotherly Cc: Link: https://lore.kernel.org/r/YyMjQO3mhyXlMbCf@piranha Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e722885da5f6..d309304cdc46 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9149,6 +9149,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0871, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0872, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0873, "Dell Precision 3930", ALC255_FIXUP_DUMMY_LINEOUT_VERB), + SND_PCI_QUIRK(0x1028, 0x087d, "Dell Precision 5530", ALC289_FIXUP_DUAL_SPK), SND_PCI_QUIRK(0x1028, 0x08ad, "Dell WYSE AIO", ALC225_FIXUP_DELL_WYSE_AIO_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x08ae, "Dell WYSE NB", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0935, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB), From b16c8f229a58eaddfc58aab447253464abd3c85e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 15 Sep 2022 17:47:24 +0200 Subject: [PATCH 08/15] ALSA: hda/realtek: Re-arrange quirk table entries A few entries have been mistakenly inserted in wrong positions without considering the SSID ordering. Place them at right positions. Fixes: b7557267c233 ("ALSA: hda/realtek: Add quirk for ASUS GA402") Fixes: 94db9cc8f8fa ("ALSA: hda/realtek: Add quirk for ASUS GU603") Fixes: 739d0959fbed ("ALSA: hda: Add quirk for ASUS Flow x13") Cc: Link: https://lore.kernel.org/r/20220915154724.31634-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d309304cdc46..90fde53e6956 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9341,10 +9341,11 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x13b0, "ASUS Z550SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK), SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_ASUS_ZENBOOK_UX31A), + SND_PCI_QUIRK(0x1043, 0x1662, "ASUS GV301QH", ALC294_FIXUP_ASUS_DUAL_SPK), + SND_PCI_QUIRK(0x1043, 0x16b2, "ASUS GU603", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x1740, "ASUS UX430UA", ALC295_FIXUP_ASUS_DACS), SND_PCI_QUIRK(0x1043, 0x17d1, "ASUS UX431FL", ALC294_FIXUP_ASUS_DUAL_SPK), - SND_PCI_QUIRK(0x1043, 0x1662, "ASUS GV301QH", ALC294_FIXUP_ASUS_DUAL_SPK), SND_PCI_QUIRK(0x1043, 0x1881, "ASUS Zephyrus S/M", ALC294_FIXUP_ASUS_GX502_PINS), SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC), SND_PCI_QUIRK(0x1043, 0x18f1, "Asus FX505DT", ALC256_FIXUP_ASUS_HEADSET_MIC), @@ -9361,13 +9362,12 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC), + SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE), SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502), SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), - SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), - SND_PCI_QUIRK(0x1043, 0x16b2, "ASUS GU603", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x834a, "ASUS S101", ALC269_FIXUP_STEREO_DMIC), From c611e659044168e7abcbae8ba1ea833521498fbb Mon Sep 17 00:00:00 2001 From: "Luke D. Jones" Date: Thu, 15 Sep 2022 20:09:19 +1200 Subject: [PATCH 09/15] ALSA: hda/realtek: Add pincfg for ASUS G513 HP jack Fixes up the pincfg for ASUS ROG Strix G513 headphone and mic combo jack [ Fixed the position in the quirk table by tiwai ] Signed-off-by: Luke D. Jones Cc: Link: https://lore.kernel.org/r/20220915080921.35563-2-luke@ljones.dev Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 90fde53e6956..5ab20059e4dd 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7067,6 +7067,7 @@ enum { ALC294_FIXUP_ASUS_GU502_HP, ALC294_FIXUP_ASUS_GU502_PINS, ALC294_FIXUP_ASUS_GU502_VERBS, + ALC294_FIXUP_ASUS_G513_PINS, ALC285_FIXUP_HP_GPIO_LED, ALC285_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_GPIO_LED, @@ -8405,6 +8406,15 @@ static const struct hda_fixup alc269_fixups[] = { [ALC294_FIXUP_ASUS_GU502_HP] = { .type = HDA_FIXUP_FUNC, .v.func = alc294_fixup_gu502_hp, + }, + [ALC294_FIXUP_ASUS_G513_PINS] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x19, 0x03a11050 }, /* front HP mic */ + { 0x1a, 0x03a11c30 }, /* rear external mic */ + { 0x21, 0x03211420 }, /* front HP out */ + { } + }, }, [ALC294_FIXUP_ASUS_COEF_1B] = { .type = HDA_FIXUP_VERBS, @@ -9366,6 +9376,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE), SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502), SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS), + SND_PCI_QUIRK(0x1043, 0x1e5e, "ASUS ROG Strix G513", ALC294_FIXUP_ASUS_G513_PINS), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2), From bc2c23549ccd7105eb6ff0d4f0ac519285628673 Mon Sep 17 00:00:00 2001 From: "Luke D. Jones" Date: Thu, 15 Sep 2022 20:09:20 +1200 Subject: [PATCH 10/15] ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack Fixes up the pincfg for ASUS ROG Strix G15 (G533Z) headphone combo jack [ Fixed the position in the quirk table by tiwai ] Signed-off-by: Luke D. Jones Cc: Link: https://lore.kernel.org/r/20220915080921.35563-3-luke@ljones.dev Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5ab20059e4dd..de8c29d65362 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7068,6 +7068,7 @@ enum { ALC294_FIXUP_ASUS_GU502_PINS, ALC294_FIXUP_ASUS_GU502_VERBS, ALC294_FIXUP_ASUS_G513_PINS, + ALC285_FIXUP_ASUS_G533Z_PINS, ALC285_FIXUP_HP_GPIO_LED, ALC285_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_GPIO_LED, @@ -8416,6 +8417,15 @@ static const struct hda_fixup alc269_fixups[] = { { } }, }, + [ALC285_FIXUP_ASUS_G533Z_PINS] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x14, 0x90170120 }, + { } + }, + .chained = true, + .chain_id = ALC294_FIXUP_ASUS_G513_PINS, + }, [ALC294_FIXUP_ASUS_COEF_1B] = { .type = HDA_FIXUP_VERBS, .v.verbs = (const struct hda_verb[]) { @@ -9371,6 +9381,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), + SND_PCI_QUIRK(0x1043, 0x1c92, "ASUS ROG Strix G15", ALC285_FIXUP_ASUS_G533Z_PINS), SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE), From ba1f818053b0668a1ce2fe86b840e81b592cc560 Mon Sep 17 00:00:00 2001 From: "Luke D. Jones" Date: Thu, 15 Sep 2022 20:09:21 +1200 Subject: [PATCH 11/15] ALSA: hda/realtek: Add quirk for ASUS GA503R laptop The ASUS G15 2022 (GA503R) series laptop has the same node-to-DAC pairs as early models and the G14, this includes bass speakers which are by default mapped incorrectly to the 0x06 node. Add a quirk to use the same DAC pairs as the G14. Signed-off-by: Luke D. Jones Cc: Link: https://lore.kernel.org/r/20220915080921.35563-4-luke@ljones.dev Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index de8c29d65362..ab0ee0565706 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9389,6 +9389,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS), SND_PCI_QUIRK(0x1043, 0x1e5e, "ASUS ROG Strix G513", ALC294_FIXUP_ASUS_G513_PINS), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), + SND_PCI_QUIRK(0x1043, 0x1c52, "ASUS Zephyrus G15 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC), From 5f80d6bd2b01de4cafac3302f58456bf860322fc Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Tue, 13 Sep 2022 09:02:16 +0200 Subject: [PATCH 12/15] ALSA: hda/hdmi: Fix the converter reuse for the silent stream When the user space pcm stream uses the silent stream converter, it is no longer allocated for the silent stream. Clear the appropriate flag in the hdmi_pcm_open() function. The silent stream setup may be applied in hdmi_pcm_close() (and the error path - open fcn) again. If the flag is not cleared, the reuse conditions for the silent stream converter in hdmi_choose_cvt() may improperly share this converter. Cc: Kai Vehmanen Signed-off-by: Jaroslav Kysela Link: https://lore.kernel.org/r/20220913070216.3233974-1-perex@perex.cz Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index c9d9aa6351ec..c239d9dbbaef 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1278,6 +1278,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, set_bit(pcm_idx, &spec->pcm_in_use); per_pin = get_pin(spec, pin_idx); per_pin->cvt_nid = per_cvt->cvt_nid; + per_pin->silent_stream = false; hinfo->nid = per_cvt->cvt_nid; /* flip stripe flag for the assigned stream if supported */ From 496322302bf1e58dc2ff134173527493105f51ab Mon Sep 17 00:00:00 2001 From: Daniel Houldsworth Date: Sun, 18 Sep 2022 18:13:00 +0100 Subject: [PATCH 13/15] ALSA: hda/realtek: Add a quirk for HP OMEN 16 (8902) mute LED Similair to the HP OMEN 15, the HP OMEN 16 also needs ALC285_FIXUP_HP_MUTE_LED for the mute LED to work. [ Rearranged the entry in PCI SSID order by tiwai ] Signed-off-by: Daniel Houldsworth Cc: Link: https://lore.kernel.org/r/20220918171300.24693-1-dhould3@gmail.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ab0ee0565706..f9d46ae4c7b7 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9314,6 +9314,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8896, "HP EliteBook 855 G8 Notebook PC", ALC285_FIXUP_HP_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x8898, "HP EliteBook 845 G8 Notebook PC", ALC285_FIXUP_HP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x103c, 0x88d0, "HP Pavilion 15-eh1xxx (mainboard 88D0)", ALC287_FIXUP_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x8902, "HP OMEN 16", ALC285_FIXUP_HP_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x896e, "HP EliteBook x360 830 G9", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8971, "HP EliteBook 830 G9", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8972, "HP EliteBook 840 G9", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), From c3afa2a402d1ecefa59f88d55d9e765f52f75bd9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 19 Sep 2022 14:35:16 +0200 Subject: [PATCH 14/15] ALSA: core: Fix double-free at snd_card_new() During the code change to add the support for devres-managed card instance, we put an explicit kfree(card) call at the error path in snd_card_new(). This is needed for the early error path before the card is initialized with the device, but is rather superfluous and causes a double-free at the error path after the card instance is initialized, as the destructor of the card object already contains a kfree() call. This patch fixes the double-free situation by removing the superfluous kfree(). Meanwhile we need to call kfree() explicitly for the early error path, so it's added there instead. Fixes: e8ad415b7a55 ("ALSA: core: Add managed card creation") Reported-by: Rondreis Cc: Link: https://lore.kernel.org/r/CAB7eexL1zBnB636hwS27d-LdPYZ_R1-5fJS_h=ZbCWYU=UPWJg@mail.gmail.com Link: https://lore.kernel.org/r/20220919123516.28222-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/core/init.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/core/init.c b/sound/core/init.c index 193dae361fac..5377f94eb211 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -178,10 +178,8 @@ int snd_card_new(struct device *parent, int idx, const char *xid, return -ENOMEM; err = snd_card_init(card, parent, idx, xid, module, extra_size); - if (err < 0) { - kfree(card); - return err; - } + if (err < 0) + return err; /* card is freed by error handler */ *card_ret = card; return 0; @@ -233,7 +231,7 @@ int snd_devm_card_new(struct device *parent, int idx, const char *xid, card->managed = true; err = snd_card_init(card, parent, idx, xid, module, extra_size); if (err < 0) { - devres_free(card); + devres_free(card); /* in managed mode, we need to free manually */ return err; } @@ -297,6 +295,8 @@ static int snd_card_init(struct snd_card *card, struct device *parent, mutex_unlock(&snd_card_mutex); dev_err(parent, "cannot find the slot for index %d (range 0-%i), error: %d\n", idx, snd_ecards_limit - 1, err); + if (!card->managed) + kfree(card); /* manually free here, as no destructor called */ return err; } set_bit(idx, snd_cards_lock); /* lock it */ From 79764ec772bc1346441ae1c4b1f3bd1991d634e8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 20 Sep 2022 13:39:29 +0200 Subject: [PATCH 15/15] Revert "ALSA: usb-audio: Split endpoint setups for hw_params and prepare" This reverts commit ff878b408a03bef5d610b7e2302702e16a53636e. Unfortunately the recent fix seems bringing another regressions with PulseAudio / pipewire, at least for Steinberg and MOTU devices. As a temporary solution, do a straight revert. The issue for Android will be revisited again later by another different fix (if any). Fixes: ff878b408a03 ("ALSA: usb-audio: Split endpoint setups for hw_params and prepare") Cc: BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216500 Link: https://lore.kernel.org/r/20220920113929.25162-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/usb/endpoint.c | 23 ++++++++++++++--------- sound/usb/endpoint.h | 6 ++---- sound/usb/pcm.c | 14 ++++---------- 3 files changed, 20 insertions(+), 23 deletions(-) diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 8c8f9a851f89..eb71df9da831 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -758,8 +758,7 @@ bool snd_usb_endpoint_compatible(struct snd_usb_audio *chip, * The endpoint needs to be closed via snd_usb_endpoint_close() later. * * Note that this function doesn't configure the endpoint. The substream - * needs to set it up later via snd_usb_endpoint_set_params() and - * snd_usb_endpoint_prepare(). + * needs to set it up later via snd_usb_endpoint_configure(). */ struct snd_usb_endpoint * snd_usb_endpoint_open(struct snd_usb_audio *chip, @@ -1293,13 +1292,12 @@ out_of_memory: /* * snd_usb_endpoint_set_params: configure an snd_usb_endpoint * - * It's called either from hw_params callback. * Determine the number of URBs to be used on this endpoint. * An endpoint must be configured before it can be started. * An endpoint that is already running can not be reconfigured. */ -int snd_usb_endpoint_set_params(struct snd_usb_audio *chip, - struct snd_usb_endpoint *ep) +static int snd_usb_endpoint_set_params(struct snd_usb_audio *chip, + struct snd_usb_endpoint *ep) { const struct audioformat *fmt = ep->cur_audiofmt; int err; @@ -1382,18 +1380,18 @@ static int init_sample_rate(struct snd_usb_audio *chip, } /* - * snd_usb_endpoint_prepare: Prepare the endpoint + * snd_usb_endpoint_configure: Configure the endpoint * * This function sets up the EP to be fully usable state. - * It's called either from prepare callback. + * It's called either from hw_params or prepare callback. * The function checks need_setup flag, and performs nothing unless needed, * so it's safe to call this multiple times. * * This returns zero if unchanged, 1 if the configuration has changed, * or a negative error code. */ -int snd_usb_endpoint_prepare(struct snd_usb_audio *chip, - struct snd_usb_endpoint *ep) +int snd_usb_endpoint_configure(struct snd_usb_audio *chip, + struct snd_usb_endpoint *ep) { bool iface_first; int err = 0; @@ -1414,6 +1412,9 @@ int snd_usb_endpoint_prepare(struct snd_usb_audio *chip, if (err < 0) goto unlock; } + err = snd_usb_endpoint_set_params(chip, ep); + if (err < 0) + goto unlock; goto done; } @@ -1441,6 +1442,10 @@ int snd_usb_endpoint_prepare(struct snd_usb_audio *chip, if (err < 0) goto unlock; + err = snd_usb_endpoint_set_params(chip, ep); + if (err < 0) + goto unlock; + err = snd_usb_select_mode_quirk(chip, ep->cur_audiofmt); if (err < 0) goto unlock; diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h index e67ea28faa54..6a9af04cf175 100644 --- a/sound/usb/endpoint.h +++ b/sound/usb/endpoint.h @@ -17,10 +17,8 @@ snd_usb_endpoint_open(struct snd_usb_audio *chip, bool is_sync_ep); void snd_usb_endpoint_close(struct snd_usb_audio *chip, struct snd_usb_endpoint *ep); -int snd_usb_endpoint_set_params(struct snd_usb_audio *chip, - struct snd_usb_endpoint *ep); -int snd_usb_endpoint_prepare(struct snd_usb_audio *chip, - struct snd_usb_endpoint *ep); +int snd_usb_endpoint_configure(struct snd_usb_audio *chip, + struct snd_usb_endpoint *ep); int snd_usb_endpoint_get_clock_rate(struct snd_usb_audio *chip, int clock); bool snd_usb_endpoint_compatible(struct snd_usb_audio *chip, diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index b604f7e95e82..d45d1d7e6664 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -443,17 +443,17 @@ static int configure_endpoints(struct snd_usb_audio *chip, if (stop_endpoints(subs, false)) sync_pending_stops(subs); if (subs->sync_endpoint) { - err = snd_usb_endpoint_prepare(chip, subs->sync_endpoint); + err = snd_usb_endpoint_configure(chip, subs->sync_endpoint); if (err < 0) return err; } - err = snd_usb_endpoint_prepare(chip, subs->data_endpoint); + err = snd_usb_endpoint_configure(chip, subs->data_endpoint); if (err < 0) return err; snd_usb_set_format_quirk(subs, subs->cur_audiofmt); } else { if (subs->sync_endpoint) { - err = snd_usb_endpoint_prepare(chip, subs->sync_endpoint); + err = snd_usb_endpoint_configure(chip, subs->sync_endpoint); if (err < 0) return err; } @@ -551,13 +551,7 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream, subs->cur_audiofmt = fmt; mutex_unlock(&chip->mutex); - if (subs->sync_endpoint) { - ret = snd_usb_endpoint_set_params(chip, subs->sync_endpoint); - if (ret < 0) - goto unlock; - } - - ret = snd_usb_endpoint_set_params(chip, subs->data_endpoint); + ret = configure_endpoints(chip, subs); unlock: if (ret < 0)