From 5d85ea2c879781d296bd770f562d33a58161d2b1 Mon Sep 17 00:00:00 2001 From: Vijaya Krishna Nivarthi Date: Wed, 14 Jun 2023 16:58:07 +0530 Subject: [PATCH] soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer The select_fifo/dma_mode() functions in geni driver enable/disable interrupts (secondary included) conditionally for non-uart modes, while uart is supposed to manage this internally. However, only uart uses secondary IRQs while spi, i2c do not care about these at all making their enablement (or disablement) totally unnecessary for these protos. Similarly, select_gpi_mode() also does disable s_irq and its useless again. Drop enabling/disabling secondary IRQs. This doesn't solve any observed problem but only gets rid of code pieces that are not required. Signed-off-by: Vijaya Krishna Nivarthi Reviewed-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1686742087-30731-1-git-send-email-quic_vnivarth@quicinc.com --- drivers/soc/qcom/qcom-geni-se.c | 28 ++++------------------------ 1 file changed, 4 insertions(+), 24 deletions(-) diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c index 795a2e1d59b3..0e01a31dde7a 100644 --- a/drivers/soc/qcom/qcom-geni-se.c +++ b/drivers/soc/qcom/qcom-geni-se.c @@ -281,27 +281,14 @@ static void geni_se_select_fifo_mode(struct geni_se *se) geni_se_irq_clear(se); - /* - * The RX path for the UART is asynchronous and so needs more - * complex logic for enabling / disabling its interrupts. - * - * Specific notes: - * - The done and TX-related interrupts are managed manually. - * - We don't RX from the main sequencer (we use the secondary) so - * we don't need the RX-related interrupts enabled in the main - * sequencer for UART. - */ + /* UART driver manages enabling / disabling interrupts internally */ if (proto != GENI_SE_UART) { + /* Non-UART use only primary sequencer so dont bother about S_IRQ */ val_old = val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN); val |= M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN; val |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN; if (val != val_old) writel_relaxed(val, se->base + SE_GENI_M_IRQ_EN); - - val_old = val = readl_relaxed(se->base + SE_GENI_S_IRQ_EN); - val |= S_CMD_DONE_EN; - if (val != val_old) - writel_relaxed(val, se->base + SE_GENI_S_IRQ_EN); } val_old = val = readl_relaxed(se->base + SE_GENI_DMA_MODE_EN); @@ -317,17 +304,14 @@ static void geni_se_select_dma_mode(struct geni_se *se) geni_se_irq_clear(se); + /* UART driver manages enabling / disabling interrupts internally */ if (proto != GENI_SE_UART) { + /* Non-UART use only primary sequencer so dont bother about S_IRQ */ val_old = val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN); val &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN); val &= ~(M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN); if (val != val_old) writel_relaxed(val, se->base + SE_GENI_M_IRQ_EN); - - val_old = val = readl_relaxed(se->base + SE_GENI_S_IRQ_EN); - val &= ~S_CMD_DONE_EN; - if (val != val_old) - writel_relaxed(val, se->base + SE_GENI_S_IRQ_EN); } val_old = val = readl_relaxed(se->base + SE_GENI_DMA_MODE_EN); @@ -344,10 +328,6 @@ static void geni_se_select_gpi_mode(struct geni_se *se) writel(0, se->base + SE_IRQ_EN); - val = readl(se->base + SE_GENI_S_IRQ_EN); - val &= ~S_CMD_DONE_EN; - writel(val, se->base + SE_GENI_S_IRQ_EN); - val = readl(se->base + SE_GENI_M_IRQ_EN); val &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN | M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN);