iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

dt-bindings: net: dsa: qca8k: support internal mdio-bus

Browse Source 
This patch updates the qca8k's binding to document to the
approach for using the internal mdio-bus of the supported
qca8k switches.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Christian Lamparter 2019-03-22 01:05:01 +01:00 committed by David S. Miller
parent fb1eb41a3d
commit 5e07321f33
1 changed files with 64 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

69
Documentation/devicetree/bindings/net/dsa/qca8k.txt
View File

@ -12,10 +12,15 @@ Required properties:
Subnodes:
The integrated switch subnode should be specified according to the binding
described in dsa/dsa.txt. As the QCA8K switches do not have a N:N mapping of
port and PHY id, each subnode describing a port needs to have a valid phandle
referencing the internal PHY connected to it. The CPU port of this switch is
always port 0.
described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external
mdio-bus each subnode describing a port needs to have a valid phandle
referencing the internal PHY it is connected to. This is because there's no
N:N mapping of port and PHY id.
Don't use mixed external and internal mdio-bus configurations, as this is
not supported by the hardware.
The CPU port of this switch is always port 0.
A CPU port node has the following optional node:
@ -31,8 +36,9 @@ For QCA8K the 'fixed-link' sub-node supports only the following properties:
- 'full-duplex' (boolean, optional), to indicate that full duplex is
used. When absent, half duplex is assumed.
Example:
Examples:
for the external mdio-bus configuration:
&mdio0 {
phy_port1: phy@0 {
@ -108,3 +114,56 @@ Example:
};
};
};
for the internal master mdio-bus configuration:
&mdio0 {
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
fixed-link {
speed = 1000;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan1";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
port@4 {
reg = <4>;
label = "lan4";
};
port@5 {
reg = <5>;
label = "wan";
};
};
};
};