iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

powerpc updates for 4.19

Browse Source 
Notable changes:
 
  - A fix for a bug in our page table fragment allocator, where a page table page
    could be freed and reallocated for something else while still in use, leading
    to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for
    a powerpc only refcount.
 
  - Fixes to our pkey support. Several are user-visible changes, but bring us in
    to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer
    for reporting many of these.
 
  - A series to improve the hvc driver & related OPAL console code, which have
    been seen to cause hardlockups at times. The hvc driver changes in particular
    have been in linux-next for ~month.
 
  - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y.
 
  - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use
    anywhere other than as a paper weight.
 
  - An optimised memcmp implementation using Power7-or-later VMX instructions
 
  - Support for barrier_nospec on some NXP CPUs.
 
  - Support for flushing the count cache on context switch on some IBM CPUs
    (controlled by firmware), as a Spectre v2 mitigation.
 
  - A series to enhance the information we print on unhandled signals to bring it
    into line with other arches, including showing the offending VMA and dumping
    the instructions around the fault.
 
 Thanks to:
   Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey
   Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar,
   Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan,
   Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza,
   Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt,
   Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian
   Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand,
   Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley,
   Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus
   Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael
   Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas
   Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap,
   Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff,
   Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson,
   Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao
   B, zhong jiang.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAlt2O6cTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgC7hD/4+cj796Df7GsVsIMxzQm7SS9dklIdO
 JuKj2Nr5HRzTH59jWlXukLG9mfTNCFgFJB4gEpK1ArDOTcHTCI9RRsLZTZ/kum66
 7Pd+7T40dLYXB5uecuUs0vMXa2fI3syKh1VLzACSXv3Dh9BBIKQBwW/aD2eww4YI
 1fS5LnXZ2PSxfr6KNAC6ogZnuaiD0sHXOYrtGHq+S/TFC7+Z6ySa6+AnPS+hPVoo
 /rHDE1Khr66aj7uk+PP2IgUrCFj6Sbj6hTVlS/iAuwbMjUl9ty6712PmvX9x6wMZ
 13hJQI+g6Ci+lqLKqmqVUpXGSr6y4NJGPS/Hko4IivBTJApI+qV/tF2H9nxU+6X0
 0RqzsMHPHy13n2torA1gC7ttzOuXPI4hTvm6JWMSsfmfjTxLANJng3Dq3ejh6Bqw
 76EMowpDLexwpy7/glPpqNdsP4ySf2Qm8yq3mR7qpL4m3zJVRGs11x+s5DW8NKBL
 Fl5SqZvd01abH+sHwv6NLaLkEtayUyohxvyqu2RU3zu5M5vi7DhqstybTPjKPGu0
 icSPh7b2y10WpOUpC6lxpdi8Me8qH47mVc/trZ+SpgBrsuEmtJhGKszEnzRCOqos
 o2IhYHQv3lQv86kpaAFQlg/RO+Lv+Lo5qbJ209V+hfU5nYzXpEulZs4dx1fbA+ze
 fK8GEh+u0L4uJg==
 =PzRz
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - A fix for a bug in our page table fragment allocator, where a page
     table page could be freed and reallocated for something else while
     still in use, leading to memory corruption etc. The fix reuses
     pt_mm in struct page (x86 only) for a powerpc only refcount.

   - Fixes to our pkey support. Several are user-visible changes, but
     bring us in to line with x86 behaviour and/or fix outright bugs.
     Thanks to Florian Weimer for reporting many of these.

   - A series to improve the hvc driver & related OPAL console code,
     which have been seen to cause hardlockups at times. The hvc driver
     changes in particular have been in linux-next for ~month.

   - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y.

   - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in
     use anywhere other than as a paper weight.

   - An optimised memcmp implementation using Power7-or-later VMX
     instructions

   - Support for barrier_nospec on some NXP CPUs.

   - Support for flushing the count cache on context switch on some IBM
     CPUs (controlled by firmware), as a Spectre v2 mitigation.

   - A series to enhance the information we print on unhandled signals
     to bring it into line with other arches, including showing the
     offending VMA and dumping the instructions around the fault.

  Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey
  Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan,
  Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski,
  Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng,
  Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph
  Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave
  Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer,
  Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand,
  Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel
  Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh
  Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues,
  Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha,
  Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul
  Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza
  Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood,
  Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago
  Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat
  Rao, zhong jiang"

* tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits)
  powerpc/mm/book3s/radix: Add mapping statistics
  powerpc/uaccess: Enable get_user(u64, *p) on 32-bit
  powerpc/mm/hash: Remove unnecessary do { } while(0) loop
  powerpc/64s: move machine check SLB flushing to mm/slb.c
  powerpc/powernv/idle: Fix build error
  powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range
  powerpc/mm: remove warning about ‘type’ being set
  powerpc/32: Include setup.h header file to fix warnings
  powerpc: Move `path` variable inside DEBUG_PROM
  powerpc/powermac: Make some functions static
  powerpc/powermac: Remove variable x that's never read
  cxl: remove a dead branch
  powerpc/powermac: Add missing include of header pmac.h
  powerpc/kexec: Use common error handling code in setup_new_fdt()
  powerpc/xmon: Add address lookup for percpu symbols
  powerpc/mm: remove huge_pte_offset_and_shift() prototype
  powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled
  powerpc/pseries: Fix endianness while restoring of r3 in MCE handler.
  powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements
  powerpc/fadump: handle crash memory ranges array index overflow
  ...
This commit is contained in:
Linus Torvalds 2018-08-17 11:32:50 -07:00
commit 5e2d059b52
363 changed files with 5264 additions and 5268 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
Documentation/ABI/testing/ppc-memtrace
View File

@ -13,10 +13,11 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: Write an integer containing the size in bytes of the memory
you want removed from each NUMA node to this file - it must be
aligned to the memblock size. This amount of RAM will be removed
from the kernel mappings and the following debugfs files will be
created. This can only be successfully done once per boot. Once
memory is successfully removed from each node, the following
files are created.
from each NUMA node in the kernel mappings and the following
debugfs files will be created. Once memory is successfully
removed from each node, the following files are created. To
re-add memory to the kernel, echo 0 into this file (it will be
automatically onlined).
What: /sys/kernel/debug/powerpc/memtrace/<node-id>
Date: Aug 2017

4
Documentation/admin-guide/kernel-parameters.txt
View File

@ -2784,6 +2784,10 @@
nosmt=force: Force disable SMT, cannot be undone
via the sysfs control file.
nospectre_v1 [PPC] Disable mitigations for Spectre Variant 1 (bounds
check bypass). With this option data leaks are possible
in the system.
nospectre_v2 [X86] Disable all mitigations for the Spectre variant 2
(indirect branch prediction) vulnerability. System may
allow data leaks with this option, which is equivalent

43
Documentation/hwmon/ibmpowernv
View File

@ -33,9 +33,48 @@ fanX_input Measured RPM value.
fanX_min Threshold RPM for alert generation.
fanX_fault 0: No fail condition
1: Failing fan
tempX_input Measured ambient temperature.
tempX_max Threshold ambient temperature for alert generation.
inX_input Measured power supply voltage
tempX_highest Historical maximum temperature
tempX_lowest Historical minimum temperature
tempX_enable Enable/disable all temperature sensors belonging to the
sub-group. In POWER9, this attribute corresponds to
each OCC. Using this attribute each OCC can be asked to
disable/enable all of its temperature sensors.
1: Enable
0: Disable
inX_input Measured power supply voltage (millivolt)
inX_fault 0: No fail condition.
1: Failing power supply.
power1_input System power consumption (microWatt)
inX_highest Historical maximum voltage
inX_lowest Historical minimum voltage
inX_enable Enable/disable all voltage sensors belonging to the
sub-group. In POWER9, this attribute corresponds to
each OCC. Using this attribute each OCC can be asked to
disable/enable all of its voltage sensors.
1: Enable
0: Disable
powerX_input Power consumption (microWatt)
powerX_input_highest Historical maximum power
powerX_input_lowest Historical minimum power
powerX_enable Enable/disable all power sensors belonging to the
sub-group. In POWER9, this attribute corresponds to
each OCC. Using this attribute each OCC can be asked to
disable/enable all of its power sensors.
1: Enable
0: Disable
currX_input Measured current (milliampere)
currX_highest Historical maximum current
currX_lowest Historical minimum current
currX_enable Enable/disable all current sensors belonging to the
sub-group. In POWER9, this attribute corresponds to
each OCC. Using this attribute each OCC can be asked to
disable/enable all of its current sensors.
1: Enable
0: Disable
energyX_input Cumulative energy (microJoule)

58
Documentation/powerpc/DAWR-POWER9.txt Normal file
View File

@ -0,0 +1,58 @@
DAWR issues on POWER9
============================
On POWER9 the DAWR can cause a checkstop if it points to cache
inhibited (CI) memory. Currently Linux has no way to disinguish CI
memory when configuring the DAWR, so (for now) the DAWR is disabled by
this commit:
commit 9654153158d3e0684a1bdb76dbababdb7111d5a0
Author: Michael Neuling <mikey@neuling.org>
Date: Tue Mar 27 15:37:24 2018 +1100
powerpc: Disable DAWR in the base POWER9 CPU features
Technical Details:
============================
DAWR has 6 different ways of being set.
1) ptrace
2) h_set_mode(DAWR)
3) h_set_dabr()
4) kvmppc_set_one_reg()
5) xmon
For ptrace, we now advertise zero breakpoints on POWER9 via the
PPC_PTRACE_GETHWDBGINFO call. This results in GDB falling back to
software emulation of the watchpoint (which is slow).
h_set_mode(DAWR) and h_set_dabr() will now return an error to the
guest on a POWER9 host. Current Linux guests ignore this error, so
they will silently not get the DAWR.
kvmppc_set_one_reg() will store the value in the vcpu but won't
actually set it on POWER9 hardware. This is done so we don't break
migration from POWER8 to POWER9, at the cost of silently losing the
DAWR on the migration.
For xmon, the 'bd' command will return an error on P9.
Consequences for users
============================
For GDB watchpoints (ie 'watch' command) on POWER9 bare metal , GDB
will accept the command. Unfortunately since there is no hardware
support for the watchpoint, GDB will software emulate the watchpoint
making it run very slowly.
The same will also be true for any guests started on a POWER9
host. The watchpoint will fail and GDB will fall back to software
emulation.
If a guest is started on a POWER8 host, GDB will accept the watchpoint
and configure the hardware to use the DAWR. This will run at full
speed since it can use the hardware emulation. Unfortunately if this
guest is migrated to a POWER9 host, the watchpoint will be lost on the
POWER9. Loads and stores to the watchpoint locations will not be
trapped in GDB. The watchpoint is remembered, so if the guest is
migrated back to the POWER8 host, it will start working again.

44
Documentation/powerpc/transactional_memory.txt
View File

@ -198,3 +198,47 @@ presented). The transaction cannot then be continued and will take the failure
handler route. Furthermore, the transactional 2nd register state will be
inaccessible. GDB can currently be used on programs using TM, but not sensibly
in parts within transactions.
POWER9
======
TM on POWER9 has issues with storing the complete register state. This
is described in this commit:
commit 4bb3c7a0208fc13ca70598efd109901a7cd45ae7
Author: Paul Mackerras <paulus@ozlabs.org>
Date: Wed Mar 21 21:32:01 2018 +1100
KVM: PPC: Book3S HV: Work around transactional memory bugs in POWER9
To account for this different POWER9 chips have TM enabled in
different ways.
On POWER9N DD2.01 and below, TM is disabled. ie
HWCAP2[PPC_FEATURE2_HTM] is not set.
On POWER9N DD2.1 TM is configured by firmware to always abort a
transaction when tm suspend occurs. So tsuspend will cause a
transaction to be aborted and rolled back. Kernel exceptions will also
cause the transaction to be aborted and rolled back and the exception
will not occur. If userspace constructs a sigcontext that enables TM
suspend, the sigcontext will be rejected by the kernel. This mode is
advertised to users with HWCAP2[PPC_FEATURE2_HTM_NO_SUSPEND] set.
HWCAP2[PPC_FEATURE2_HTM] is not set in this mode.
On POWER9N DD2.2 and above, KVM and POWERVM emulate TM for guests (as
described in commit 4bb3c7a0208f), hence TM is enabled for guests
ie. HWCAP2[PPC_FEATURE2_HTM] is set for guest userspace. Guests that
makes heavy use of TM suspend (tsuspend or kernel suspend) will result
in traps into the hypervisor and hence will suffer a performance
degradation. Host userspace has TM disabled
ie. HWCAP2[PPC_FEATURE2_HTM] is not set. (although we make enable it
at some point in the future if we bring the emulation into host
userspace context switching).
POWER9C DD1.2 and above are only available with POWERVM and hence
Linux only runs as a guest. On these systems TM is emulated like on
POWER9N DD2.2.
Guest migration from POWER8 to POWER9 will work with POWER9N DD2.2 and
POWER9C DD1.2. Since earlier POWER9 processors don't support TM
emulation, migration from POWER8 to POWER9 is not supported there.

5
MAINTAINERS
View File

@ -813,11 +813,6 @@ S: Supported
F: drivers/net/ethernet/amd/xgbe/
F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
AMS (Apple Motion Sensor) DRIVER
M: Michael Hanselmann <linux-kernel@hansmi.ch>
S: Supported
F: drivers/macintosh/ams/
ANALOG DEVICES INC AD5686 DRIVER
M: Stefan Popa <stefan.popa@analog.com>
L: linux-pm@vger.kernel.org

2
arch/m68k/configs/mac_defconfig
View File

@ -366,7 +366,7 @@ CONFIG_TCM_PSCSI=m
CONFIG_ADB=y
CONFIG_ADB_MACII=y
CONFIG_ADB_IOP=y
CONFIG_ADB_PMU68K=y
CONFIG_ADB_PMU=y
CONFIG_ADB_CUDA=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y

2
arch/m68k/configs/multi_defconfig
View File

@ -400,7 +400,7 @@ CONFIG_TCM_PSCSI=m
CONFIG_ADB=y
CONFIG_ADB_MACII=y
CONFIG_ADB_IOP=y
CONFIG_ADB_PMU68K=y
CONFIG_ADB_PMU=y
CONFIG_ADB_CUDA=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y

2
arch/m68k/mac/config.c
View File

@ -889,7 +889,7 @@ static void __init mac_identify(void)
#ifdef CONFIG_ADB_CUDA
find_via_cuda();
#endif
#ifdef CONFIG_ADB_PMU68K
#ifdef CONFIG_ADB_PMU
find_via_pmu();
#endif
}

54
arch/m68k/mac/misc.c
View File

@ -90,7 +90,7 @@ static void cuda_write_pram(int offset, __u8 data)
}
#endif /* CONFIG_ADB_CUDA */
#ifdef CONFIG_ADB_PMU68K
#ifdef CONFIG_ADB_PMU
static time64_t pmu_read_time(void)
{
struct adb_request req;
@ -142,7 +142,7 @@ static void pmu_write_pram(int offset, __u8 data)
while (!req.complete)
pmu_poll();
}
#endif /* CONFIG_ADB_PMU68K */
#endif /* CONFIG_ADB_PMU */
/*
* VIA PRAM/RTC access routines
@ -373,38 +373,6 @@ static void cuda_shutdown(void)
}
#endif /* CONFIG_ADB_CUDA */
#ifdef CONFIG_ADB_PMU68K
void pmu_restart(void)
{
struct adb_request req;
if (pmu_request(&req, NULL,
2, PMU_SET_INTR_MASK, PMU_INT_ADB|PMU_INT_TICK) < 0)
return;
while (!req.complete)
pmu_poll();
if (pmu_request(&req, NULL, 1, PMU_RESET) < 0)
return;
while (!req.complete)
pmu_poll();
}
void pmu_shutdown(void)
{
struct adb_request req;
if (pmu_request(&req, NULL,
2, PMU_SET_INTR_MASK, PMU_INT_ADB|PMU_INT_TICK) < 0)
return;
while (!req.complete)
pmu_poll();
if (pmu_request(&req, NULL, 5, PMU_SHUTDOWN, 'M', 'A', 'T', 'T') < 0)
return;
while (!req.complete)
pmu_poll();
}
#endif
/*
*-------------------------------------------------------------------
* Below this point are the generic routines; they'll dispatch to the
@ -429,7 +397,7 @@ void mac_pram_read(int offset, __u8 *buffer, int len)
func = cuda_read_pram;
break;
#endif
#ifdef CONFIG_ADB_PMU68K
#ifdef CONFIG_ADB_PMU
case MAC_ADB_PB2:
func = pmu_read_pram;
break;
@ -459,7 +427,7 @@ void mac_pram_write(int offset, __u8 *buffer, int len)
func = cuda_write_pram;
break;
#endif
#ifdef CONFIG_ADB_PMU68K
#ifdef CONFIG_ADB_PMU
case MAC_ADB_PB2:
func = pmu_write_pram;
break;
@ -483,9 +451,8 @@ void mac_poweroff(void)
macintosh_config->adb_type == MAC_ADB_CUDA) {
cuda_shutdown();
#endif
#ifdef CONFIG_ADB_PMU68K
} else if (macintosh_config->adb_type == MAC_ADB_PB1
|| macintosh_config->adb_type == MAC_ADB_PB2) {
#ifdef CONFIG_ADB_PMU
} else if (macintosh_config->adb_type == MAC_ADB_PB2) {
pmu_shutdown();
#endif
}
@ -525,9 +492,8 @@ void mac_reset(void)
macintosh_config->adb_type == MAC_ADB_CUDA) {
cuda_restart();
#endif
#ifdef CONFIG_ADB_PMU68K
} else if (macintosh_config->adb_type == MAC_ADB_PB1
|| macintosh_config->adb_type == MAC_ADB_PB2) {
#ifdef CONFIG_ADB_PMU
} else if (macintosh_config->adb_type == MAC_ADB_PB2) {
pmu_restart();
#endif
} else if (CPU_IS_030) {
@ -680,7 +646,7 @@ int mac_hwclk(int op, struct rtc_time *t)
now = cuda_read_time();
break;
#endif
#ifdef CONFIG_ADB_PMU68K
#ifdef CONFIG_ADB_PMU
case MAC_ADB_PB2:
now = pmu_read_time();
break;
@ -716,7 +682,7 @@ int mac_hwclk(int op, struct rtc_time *t)
cuda_write_time(now);
break;
#endif
#ifdef CONFIG_ADB_PMU68K
#ifdef CONFIG_ADB_PMU
case MAC_ADB_PB2:
pmu_write_time(now);
break;

12
arch/powerpc/Kconfig
View File

@ -165,7 +165,7 @@ config PPC
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES if PPC_BOOK3S_64
select GENERIC_CPU_VULNERABILITIES if PPC_BARRIER_NOSPEC
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
select GENERIC_SMP_IDLE_THREAD
@ -197,6 +197,7 @@ config PPC
select HAVE_IOREMAP_PROT
select HAVE_IRQ_EXIT_ON_IRQ_STACK
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_XZ if PPC_BOOK3S
select HAVE_KPROBES
select HAVE_KPROBES_ON_FTRACE
select HAVE_KRETPROBES
@ -225,6 +226,7 @@ config PPC
select IRQ_DOMAIN
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_RELA
select NEED_DMA_MAP_STATE if PPC64 || NOT_COHERENT_CACHE
select NEED_SG_DMA_LENGTH
select NO_BOOTMEM
select OF
@ -240,6 +242,11 @@ config PPC
# Please keep this list sorted alphabetically.
#
config PPC_BARRIER_NOSPEC
bool
default y
depends on PPC_BOOK3S_64 || PPC_FSL_BOOK3E
config GENERIC_CSUM
def_bool n
@ -876,9 +883,6 @@ config ZONE_DMA
bool
default y
config NEED_DMA_MAP_STATE
def_bool (PPC64 || NOT_COHERENT_CACHE)
config GENERIC_ISA_DMA
bool
depends on ISA_DMA_API

49
arch/powerpc/Makefile
View File

@ -36,7 +36,7 @@ else
KBUILD_DEFCONFIG := ppc64_defconfig
endif
ifeq ($(CONFIG_PPC64),y)
ifdef CONFIG_PPC64
new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
ifeq ($(new_nm),y)
@ -74,7 +74,7 @@ KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
endif
endif
ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
ifdef CONFIG_CPU_LITTLE_ENDIAN
KBUILD_CFLAGS += -mlittle-endian
LDFLAGS += -EL
LDEMULATION := lppc
@ -117,7 +117,7 @@ LDFLAGS_vmlinux-$(CONFIG_RELOCATABLE) := -pie
LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-y)
LDFLAGS_vmlinux += $(call ld-option,--orphan-handling=warn)
ifeq ($(CONFIG_PPC64),y)
ifdef CONFIG_PPC64
ifeq ($(call cc-option-yn,-mcmodel=medium),y)
# -mcmodel=medium breaks modules because it uses 32bit offsets from
# the TOC pointer to create pointers where possible. Pointers into the
@ -134,7 +134,7 @@ endif
endif
CFLAGS-$(CONFIG_PPC64) := $(call cc-option,-mtraceback=no)
ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
ifdef CONFIG_CPU_LITTLE_ENDIAN
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2,$(call cc-option,-mcall-aixdesc))
AFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2)
else
@ -148,8 +148,8 @@ CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mno-pointers-to-nested-functions)
CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 $(MULTIPLEWORD)
CFLAGS-$(CONFIG_PPC32) += $(call cc-option,-mno-readonly-in-sdata)
ifeq ($(CONFIG_PPC_BOOK3S_64),y)
ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
ifdef CONFIG_PPC_BOOK3S_64
ifdef CONFIG_CPU_LITTLE_ENDIAN
CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=power8
CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power9,-mtune=power8)
else
@ -164,16 +164,10 @@ ifdef CONFIG_MPROFILE_KERNEL
CC_FLAGS_FTRACE := -pg -mprofile-kernel
endif
CFLAGS-$(CONFIG_CELL_CPU) += $(call cc-option,-mcpu=cell)
CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5)
CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6)
CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
CFLAGS-$(CONFIG_POWER8_CPU) += $(call cc-option,-mcpu=power8)
CFLAGS-$(CONFIG_POWER9_CPU) += $(call cc-option,-mcpu=power9)
CFLAGS-$(CONFIG_PPC_8xx) += $(call cc-option,-mcpu=860)
CFLAGS-$(CONFIG_TARGET_CPU_BOOL) += $(call cc-option,-mcpu=$(CONFIG_TARGET_CPU))
# Altivec option not allowed with e500mc64 in GCC.
ifeq ($(CONFIG_ALTIVEC),y)
ifdef CONFIG_ALTIVEC
E5500_CPU := -mcpu=powerpc64
else
E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64)
@ -181,8 +175,8 @@ endif
CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU)
CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU))
ifeq ($(CONFIG_PPC32),y)
ifeq ($(CONFIG_PPC_E500MC),y)
ifdef CONFIG_PPC32
ifdef CONFIG_PPC_E500MC
CFLAGS-y += $(call cc-option,-mcpu=e500mc,-mcpu=powerpc)
else
CFLAGS-$(CONFIG_E500) += $(call cc-option,-mcpu=8540 -msoft-float,-mcpu=powerpc)
@ -204,7 +198,7 @@ else
CHECKFLAGS += -D__LITTLE_ENDIAN__
endif
ifeq ($(CONFIG_476FPE_ERR46),y)
ifdef CONFIG_476FPE_ERR46
KBUILD_LDFLAGS_MODULE += --ppc476-workaround \
-T $(srctree)/arch/powerpc/platforms/44x/ppc476_modules.lds
endif
@ -231,12 +225,12 @@ KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
# often slow when they are implemented at all
KBUILD_CFLAGS += $(call cc-option,-mno-string)
ifeq ($(CONFIG_6xx),y)
ifdef CONFIG_6xx
KBUILD_CFLAGS += -mcpu=powerpc
endif
# Work around a gcc code-gen bug with -fno-omit-frame-pointer.
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ifdef CONFIG_FUNCTION_TRACER
KBUILD_CFLAGS += -mno-sched-epilog
endif
@ -355,6 +349,21 @@ mpc86xx_smp_defconfig:
$(call merge_into_defconfig,mpc86xx_basic_defconfig,\
86xx-smp 86xx-hw fsl-emb-nonhw)
PHONY += ppc32_allmodconfig
ppc32_allmodconfig:
$(Q)$(MAKE) KCONFIG_ALLCONFIG=$(srctree)/arch/powerpc/configs/book3s_32.config \
-f $(srctree)/Makefile allmodconfig
PHONY += ppc64le_allmodconfig
ppc64le_allmodconfig:
$(Q)$(MAKE) KCONFIG_ALLCONFIG=$(srctree)/arch/powerpc/configs/le.config \
-f $(srctree)/Makefile allmodconfig
PHONY += ppc64_book3e_allmodconfig
ppc64_book3e_allmodconfig:
$(Q)$(MAKE) KCONFIG_ALLCONFIG=$(srctree)/arch/powerpc/configs/85xx-64bit.config \
-f $(srctree)/Makefile allmodconfig
define archhelp
@echo '* zImage - Build default images selected by kernel config'
@echo ' zImage.* - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
@ -381,7 +390,7 @@ install:
$(Q)$(MAKE) $(build)=$(boot) install
vdso_install:
ifeq ($(CONFIG_PPC64),y)
ifdef CONFIG_PPC64
$(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso64 $@
endif
$(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso32 $@

2
arch/powerpc/boot/Makefile
View File

@ -354,7 +354,7 @@ image-$(CONFIG_AMIGAONE) += cuImage.amigaone
# For 32-bit powermacs, build the COFF and miboot images
# as well as the ELF images.
ifeq ($(CONFIG_PPC32),y)
ifdef CONFIG_PPC32
image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot
endif

20
arch/powerpc/boot/dts/ac14xx.dts
View File

@ -176,12 +176,12 @@
clock-frequency = <400000>;
at24@30 {
compatible = "at24,24c01";
compatible = "atmel,24c01";
reg = <0x30>;
};
at24@31 {
compatible = "at24,24c01";
compatible = "atmel,24c01";
reg = <0x31>;
};
@ -191,42 +191,42 @@
};
at24@50 {
compatible = "at24,24c01";
compatible = "atmel,24c01";
reg = <0x50>;
};
at24@51 {
compatible = "at24,24c01";
compatible = "atmel,24c01";
reg = <0x51>;
};
at24@52 {
compatible = "at24,24c01";
compatible = "atmel,24c01";
reg = <0x52>;
};
at24@53 {
compatible = "at24,24c01";
compatible = "atmel,24c01";
reg = <0x53>;
};
at24@54 {
compatible = "at24,24c01";
compatible = "atmel,24c01";
reg = <0x54>;
};
at24@55 {
compatible = "at24,24c01";
compatible = "atmel,24c01";
reg = <0x55>;
};
at24@56 {
compatible = "at24,24c01";
compatible = "atmel,24c01";
reg = <0x56>;
};
at24@57 {
compatible = "at24,24c01";
compatible = "atmel,24c01";
reg = <0x57>;
};

2
arch/powerpc/boot/dts/fsl/kmcent2.dts
View File

@ -130,7 +130,7 @@
#size-cells = <0>;
eeprom@54 {
compatible = "24c02";
compatible = "atmel,24c02";
reg = <0x54>;
pagesize = <2>;
read-only;

4
arch/powerpc/boot/dts/fsl/t2080rdb.dts
View File

@ -97,12 +97,12 @@
mdio@fd000 {
xg_cs4315_phy1: ethernet-phy@c {
compatible = "ethernet-phy-ieee802.3-c45";
compatible = "ethernet-phy-id13e5.1002";
reg = <0xc>;
};
xg_cs4315_phy2: ethernet-phy@d {
compatible = "ethernet-phy-ieee802.3-c45";
compatible = "ethernet-phy-id13e5.1002";
reg = <0xd>;
};

8
arch/powerpc/boot/dts/fsl/t4240rdb.dts
View File

@ -267,22 +267,22 @@
mdio@fd000 {
xfiphy1: ethernet-phy@10 {
compatible = "ethernet-phy-ieee802.3-c45";
compatible = "ethernet-phy-id13e5.1002";
reg = <0x10>;
};
xfiphy2: ethernet-phy@11 {
compatible = "ethernet-phy-ieee802.3-c45";
compatible = "ethernet-phy-id13e5.1002";
reg = <0x11>;
};
xfiphy3: ethernet-phy@13 {
compatible = "ethernet-phy-ieee802.3-c45";
compatible = "ethernet-phy-id13e5.1002";
reg = <0x13>;
};
xfiphy4: ethernet-phy@12 {
compatible = "ethernet-phy-ieee802.3-c45";
compatible = "ethernet-phy-id13e5.1002";
reg = <0x12>;
};
};

2
arch/powerpc/boot/dts/pdm360ng.dts
View File

@ -98,7 +98,7 @@
fsl,preserve-clocking;
eeprom@50 {
compatible = "at,24c01";
compatible = "atmel,24c01";
reg = <0x50>;
};

2
arch/powerpc/configs/book3s_32.config Normal file
View File

@ -0,0 +1,2 @@
CONFIG_PPC64=n
CONFIG_PPC_BOOK3S_32=y

1
arch/powerpc/configs/dpaa.config
View File

@ -2,3 +2,4 @@ CONFIG_FSL_DPAA=y
CONFIG_FSL_PAMU=y
CONFIG_FSL_FMAN=y
CONFIG_FSL_DPAA_ETH=y
CONFIG_CORTINA_PHY=y

1
arch/powerpc/crypto/md5-asm.S
View File

@ -11,6 +11,7 @@
*/
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/asm-compat.h>
#define rHP r3
#define rWP r4

1
arch/powerpc/crypto/sha1-powerpc-asm.S
View File

@ -7,6 +7,7 @@
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/asm-compat.h>
#ifdef __BIG_ENDIAN__
#define LWZ(rt, d, ra) \

19
arch/powerpc/include/asm/asm-405.h Normal file
View File

@ -0,0 +1,19 @@
#ifndef _ASM_POWERPC_ASM_405_H
#define _ASM_POWERPC_ASM_405_H
#include <asm/asm-const.h>
#ifdef __KERNEL__
#ifdef CONFIG_IBM405_ERR77
/* Erratum #77 on the 405 means we need a sync or dcbt before every
* stwcx. The old ATOMIC_SYNC_FIX covered some but not all of this.
*/
#define PPC405_ERR77(ra,rb) stringify_in_c(dcbt ra, rb;)
#define PPC405_ERR77_SYNC stringify_in_c(sync;)
#else
#define PPC405_ERR77(ra,rb)
#define PPC405_ERR77_SYNC
#endif
#endif
#endif /* _ASM_POWERPC_ASM_405_H */

26
arch/powerpc/include/asm/asm-compat.h
View File

@ -1,21 +1,10 @@
#ifndef _ASM_POWERPC_ASM_COMPAT_H
#define _ASM_POWERPC_ASM_COMPAT_H
#include <asm/asm-const.h>
#include <asm/types.h>
#include <asm/ppc-opcode.h>
#ifdef __ASSEMBLY__
# define stringify_in_c(...) __VA_ARGS__
# define ASM_CONST(x) x
#else
/* This version of stringify will deal with commas... */
# define __stringify_in_c(...) #__VA_ARGS__
# define stringify_in_c(...) __stringify_in_c(__VA_ARGS__) " "
# define __ASM_CONST(x) x##UL
# define ASM_CONST(x) __ASM_CONST(x)
#endif
#ifdef __powerpc64__
/* operations for longs and pointers */
@ -70,17 +59,4 @@
#endif
#ifdef __KERNEL__
#ifdef CONFIG_IBM405_ERR77
/* Erratum #77 on the 405 means we need a sync or dcbt before every
* stwcx. The old ATOMIC_SYNC_FIX covered some but not all of this.
*/
#define PPC405_ERR77(ra,rb) stringify_in_c(dcbt ra, rb;)
#define PPC405_ERR77_SYNC stringify_in_c(sync;)
#else
#define PPC405_ERR77(ra,rb)
#define PPC405_ERR77_SYNC
#endif
#endif
#endif /* _ASM_POWERPC_ASM_COMPAT_H */

14
arch/powerpc/include/asm/asm-const.h Normal file
View File

@ -0,0 +1,14 @@
#ifndef _ASM_POWERPC_ASM_CONST_H
#define _ASM_POWERPC_ASM_CONST_H
#ifdef __ASSEMBLY__
# define stringify_in_c(...) __VA_ARGS__
# define ASM_CONST(x) x
#else
/* This version of stringify will deal with commas... */
# define __stringify_in_c(...) #__VA_ARGS__
# define stringify_in_c(...) __stringify_in_c(__VA_ARGS__) " "
# define __ASM_CONST(x) x##UL
# define ASM_CONST(x) __ASM_CONST(x)
#endif
#endif /* _ASM_POWERPC_ASM_CONST_H */

11
arch/powerpc/include/asm/asm-prototypes.h
View File

@ -48,8 +48,8 @@ void __trace_opal_exit(long opcode, unsigned long retval);
/* VMX copying */
int enter_vmx_usercopy(void);
int exit_vmx_usercopy(void);
int enter_vmx_copy(void);
void * exit_vmx_copy(void *dest);
int enter_vmx_ops(void);
void *exit_vmx_ops(void *dest);
/* Traps */
long machine_check_early(struct pt_regs *regs);
@ -143,4 +143,11 @@ struct kvm_vcpu;
void _kvmppc_restore_tm_pr(struct kvm_vcpu *vcpu, u64 guest_msr);
void _kvmppc_save_tm_pr(struct kvm_vcpu *vcpu, u64 guest_msr);
/* Patch sites */
extern s32 patch__call_flush_count_cache;
extern s32 patch__flush_count_cache_return;
extern s32 patch__memset_nocache, patch__memcpy_nocache;
extern long flush_count_cache;
#endif /* _ASM_POWERPC_ASM_PROTOTYPES_H */

1
arch/powerpc/include/asm/atomic.h
View File

@ -10,6 +10,7 @@
#include <linux/types.h>
#include <asm/cmpxchg.h>
#include <asm/barrier.h>
#include <asm/asm-405.h>
#define ATOMIC_INIT(i) { (i) }

14
arch/powerpc/include/asm/barrier.h
View File

@ -5,6 +5,8 @@
#ifndef _ASM_POWERPC_BARRIER_H
#define _ASM_POWERPC_BARRIER_H
#include <asm/asm-const.h>
/*
* Memory barrier.
* The sync instruction guarantees that all memory accesses initiated
@ -77,19 +79,25 @@ do { \
})
#ifdef CONFIG_PPC_BOOK3S_64
#define NOSPEC_BARRIER_SLOT nop
#elif defined(CONFIG_PPC_FSL_BOOK3E)
#define NOSPEC_BARRIER_SLOT nop; nop
#endif
#ifdef CONFIG_PPC_BARRIER_NOSPEC
/*
* Prevent execution of subsequent instructions until preceding branches have
* been fully resolved and are no longer executing speculatively.
*/
#define barrier_nospec_asm NOSPEC_BARRIER_FIXUP_SECTION; nop
#define barrier_nospec_asm NOSPEC_BARRIER_FIXUP_SECTION; NOSPEC_BARRIER_SLOT
// This also acts as a compiler barrier due to the memory clobber.
#define barrier_nospec() asm (stringify_in_c(barrier_nospec_asm) ::: "memory")
#else /* !CONFIG_PPC_BOOK3S_64 */
#else /* !CONFIG_PPC_BARRIER_NOSPEC */
#define barrier_nospec_asm
#define barrier_nospec()
#endif
#endif /* CONFIG_PPC_BARRIER_NOSPEC */
#include <asm-generic/barrier.h>

1
arch/powerpc/include/asm/bitops.h
View File

@ -45,6 +45,7 @@
#include <linux/compiler.h>
#include <asm/asm-compat.h>
#include <asm/synch.h>
#include <asm/asm-405.h>
/* PPC bit number conversion */
#define PPC_BITLSHIFT(be) (BITS_PER_LONG - 1 - (be))

7
arch/powerpc/include/asm/book3s/32/pgtable.h
View File

@ -84,17 +84,12 @@
* of RAM. -- Cort
*/
#define VMALLOC_OFFSET (0x1000000) /* 16M */
#ifdef PPC_PIN_SIZE
#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
#else
#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
#endif
#define VMALLOC_END ioremap_bot
#ifndef __ASSEMBLY__
#include <linux/sched.h>
#include <linux/threads.h>
#include <asm/io.h> /* For sub-arch specific PPC_PIN_SIZE */
extern unsigned long ioremap_bot;
@ -164,7 +159,6 @@ static inline unsigned long pte_update(pte_t *p,
1: lwarx %0,0,%3\n\
andc %1,%0,%4\n\
or %1,%1,%5\n"
PPC405_ERR77(0,%3)
" stwcx. %1,0,%3\n\
bne- 1b"
: "=&r" (old), "=&r" (tmp), "=m" (*p)
@ -186,7 +180,6 @@ static inline unsigned long long pte_update(pte_t *p,
lwzx %0,0,%3\n\
andc %1,%L0,%5\n\
or %1,%1,%6\n"
PPC405_ERR77(0,%3)
" stwcx. %1,0,%4\n\
bne- 1b"
: "=&r" (old), "=&r" (tmp), "=m" (*p)

25
arch/powerpc/include/asm/book3s/32/tlbflush.h Normal file
View File

@ -0,0 +1,25 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_POWERPC_BOOK3S_32_TLBFLUSH_H
#define _ASM_POWERPC_BOOK3S_32_TLBFLUSH_H
#define MMU_NO_CONTEXT (0)
/*
* TLB flushing for "classic" hash-MMU 32-bit CPUs, 6xx, 7xx, 7xxx
*/
extern void flush_tlb_mm(struct mm_struct *mm);
extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr);
extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
static inline void local_flush_tlb_page(struct vm_area_struct *vma,
unsigned long vmaddr)
{
flush_tlb_page(vma, vmaddr);
}
static inline void local_flush_tlb_mm(struct mm_struct *mm)
{
flush_tlb_mm(mm);
}
#endif /* _ASM_POWERPC_TLBFLUSH_H */

5
arch/powerpc/include/asm/book3s/64/hash-64k.h
View File

@ -137,10 +137,9 @@ extern bool __rpte_sub_valid(real_pte_t rpte, unsigned long index);
shift = mmu_psize_defs[psize].shift; \
for (index = 0; vpn < __end; index++, \
vpn += (1L << (shift - VPN_SHIFT))) { \
if (!__split || __rpte_sub_valid(rpte, index)) \
do {
if (!__split || __rpte_sub_valid(rpte, index))
#define pte_iterate_hashed_end() } while(0); } } while(0)
#define pte_iterate_hashed_end() } } while(0)
#define pte_pagesize_index(mm, addr, pte) \
(((pte) & H_PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K)

2
arch/powerpc/include/asm/book3s/64/hash.h
View File

@ -3,6 +3,8 @@
#define _ASM_POWERPC_BOOK3S_64_HASH_H
#ifdef __KERNEL__
#include <asm/asm-const.h>
/*
* Common bits between 4K and 64K pages in a linux-style PTE.
* Additional bits may be defined in pgtable-hash64-*.h

20
arch/powerpc/include/asm/book3s/64/hugetlb.h
View File

@ -32,26 +32,6 @@ static inline int hstate_get_psize(struct hstate *hstate)
}
}
#define arch_make_huge_pte arch_make_huge_pte
static inline pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma,
struct page *page, int writable)
{
unsigned long page_shift;
if (!cpu_has_feature(CPU_FTR_POWER9_DD1))
return entry;
page_shift = huge_page_shift(hstate_vma(vma));
/*
* We don't support 1G hugetlb pages yet.
*/
VM_WARN_ON(page_shift == mmu_psize_defs[MMU_PAGE_1G].shift);
if (page_shift == mmu_psize_defs[MMU_PAGE_2M].shift)
return __pte(pte_val(entry) | R_PAGE_LARGE);
else
return entry;
}
#ifdef CONFIG_ARCH_HAS_GIGANTIC_PAGE
static inline bool gigantic_page_supported(void)
{

15
arch/powerpc/include/asm/book3s/64/mmu-hash.h
View File

@ -12,9 +12,9 @@
* 2 of the License, or (at your option) any later version.
*/
#include <asm/asm-compat.h>
#include <asm/page.h>
#include <asm/bug.h>
#include <asm/asm-const.h>
/*
* This is necessary to get the definition of PGTABLE_RANGE which we
@ -364,6 +364,16 @@ static inline unsigned long hpte_new_to_old_r(unsigned long r)
return r & ~HPTE_R_3_0_SSIZE_MASK;
}
static inline unsigned long hpte_get_old_v(struct hash_pte *hptep)
{
unsigned long hpte_v;
hpte_v = be64_to_cpu(hptep->v);
if (cpu_has_feature(CPU_FTR_ARCH_300))
hpte_v = hpte_new_to_old_v(hpte_v, be64_to_cpu(hptep->r));
return hpte_v;
}
/*
* This function sets the AVPN and L fields of the HPTE appropriately
* using the base page size and actual page size.
@ -487,6 +497,9 @@ extern void hpte_init_native(void);
extern void slb_initialize(void);
extern void slb_flush_and_rebolt(void);
void slb_flush_all_realmode(void);
void __slb_restore_bolted_realmode(void);
void slb_restore_bolted_realmode(void);
extern void slb_vmalloc_update(void);
extern void slb_set_size(u16 size);

30
arch/powerpc/include/asm/book3s/64/pgalloc.h
View File

@ -9,6 +9,7 @@
#include <linux/slab.h>
#include <linux/cpumask.h>
#include <linux/kmemleak.h>
#include <linux/percpu.h>
struct vmemmap_backing {
@ -82,6 +83,13 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm)
pgd = kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE),
pgtable_gfp_flags(mm, GFP_KERNEL));
/*
* Don't scan the PGD for pointers, it contains references to PUDs but
* those references are not full pointers and so can't be recognised by
* kmemleak.
*/
kmemleak_no_scan(pgd);
/*
* With hugetlb, we don't clear the second half of the page table.
* If we share the same slab cache with the pmd or pud level table,
@ -110,8 +118,19 @@ static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
{
return kmem_cache_alloc(PGT_CACHE(PUD_CACHE_INDEX),
pgtable_gfp_flags(mm, GFP_KERNEL));
pud_t *pud;
pud = kmem_cache_alloc(PGT_CACHE(PUD_CACHE_INDEX),
pgtable_gfp_flags(mm, GFP_KERNEL));
/*
* Tell kmemleak to ignore the PUD, that means don't scan it for
* pointers and don't consider it a leak. PUDs are typically only
* referred to by their PGD, but kmemleak is not able to recognise those
* as pointers, leading to false leak reports.
*/
kmemleak_ignore(pud);
return pud;
}
static inline void pud_free(struct mm_struct *mm, pud_t *pud)
@ -208,4 +227,11 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
#define check_pgt_cache() do { } while (0)
extern atomic_long_t direct_pages_count[MMU_PAGE_COUNT];
static inline void update_page_count(int psize, long count)
{
if (IS_ENABLED(CONFIG_PROC_FS))
atomic_long_add(count, &direct_pages_count[psize]);
}
#endif /* _ASM_POWERPC_BOOK3S_64_PGALLOC_H */

5
arch/powerpc/include/asm/book3s/64/pgtable.h
View File

@ -479,9 +479,8 @@ static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
{
if (full && radix_enabled()) {
/*
* Let's skip the DD1 style pte update here. We know that
* this is a full mm pte clear and hence can be sure there is
* no parallel set_pte.
* We know that this is a full mm pte clear and
* hence can be sure there is no parallel set_pte.
*/
return radix__ptep_get_and_clear_full(mm, addr, ptep, full);
}

40
arch/powerpc/include/asm/book3s/64/radix.h
View File

@ -2,6 +2,8 @@
#ifndef _ASM_POWERPC_PGTABLE_RADIX_H
#define _ASM_POWERPC_PGTABLE_RADIX_H
#include <asm/asm-const.h>
#ifndef __ASSEMBLY__
#include <asm/cmpxchg.h>
#endif
@ -12,12 +14,6 @@
#include <asm/book3s/64/radix-4k.h>
#endif
/*
* For P9 DD1 only, we need to track whether the pte's huge.
*/
#define R_PAGE_LARGE _RPAGE_RSV1
#ifndef __ASSEMBLY__
#include <asm/book3s/64/tlbflush-radix.h>
#include <asm/cpu_has_feature.h>
@ -36,6 +32,9 @@
#define RADIX_PUD_BAD_BITS 0x60000000000000e0UL
#define RADIX_PGD_BAD_BITS 0x60000000000000e0UL
#define RADIX_PMD_SHIFT (PAGE_SHIFT + RADIX_PTE_INDEX_SIZE)
#define RADIX_PUD_SHIFT (RADIX_PMD_SHIFT + RADIX_PMD_INDEX_SIZE)
#define RADIX_PGD_SHIFT (RADIX_PUD_SHIFT + RADIX_PUD_INDEX_SIZE)
/*
* Size of EA range mapped by our pagetables.
*/
@ -154,20 +153,7 @@ static inline unsigned long radix__pte_update(struct mm_struct *mm,
{
unsigned long old_pte;
if (cpu_has_feature(CPU_FTR_POWER9_DD1)) {
unsigned long new_pte;
old_pte = __radix_pte_update(ptep, ~0ul, 0);
/*
* new value of pte
*/
new_pte = (old_pte | set) & ~clr;
radix__flush_tlb_pte_p9_dd1(old_pte, mm, addr);
if (new_pte)
__radix_pte_update(ptep, 0, new_pte);
} else
old_pte = __radix_pte_update(ptep, clr, set);
old_pte = __radix_pte_update(ptep, clr, set);
if (!huge)
assert_pte_locked(mm, addr);
@ -253,8 +239,6 @@ static inline int radix__pmd_trans_huge(pmd_t pmd)
static inline pmd_t radix__pmd_mkhuge(pmd_t pmd)
{
if (cpu_has_feature(CPU_FTR_POWER9_DD1))
return __pmd(pmd_val(pmd) | _PAGE_PTE | R_PAGE_LARGE);
return __pmd(pmd_val(pmd) | _PAGE_PTE);
}
@ -285,18 +269,14 @@ static inline unsigned long radix__get_tree_size(void)
unsigned long rts_field;
/*
* We support 52 bits, hence:
* DD1 52-28 = 24, 0b11000
* Others 52-31 = 21, 0b10101
* bits 52 - 31 = 21, 0b10101
* RTS encoding details
* bits 0 - 3 of rts -> bits 6 - 8 unsigned long
* bits 4 - 5 of rts -> bits 62 - 63 of unsigned long
*/
if (cpu_has_feature(CPU_FTR_POWER9_DD1))
rts_field = (0x3UL << 61);
else {
rts_field = (0x5UL << 5); /* 6 - 8 bits */
rts_field |= (0x2UL << 61);
}
rts_field = (0x5UL << 5); /* 6 - 8 bits */
rts_field |= (0x2UL << 61);
return rts_field;
}

2
arch/powerpc/include/asm/book3s/64/tlbflush-radix.h
View File

@ -48,8 +48,6 @@ extern void radix__flush_tlb_page_psize(struct mm_struct *mm, unsigned long vmad
extern void radix__flush_tlb_pwc(struct mmu_gather *tlb, unsigned long addr);
extern void radix__flush_tlb_collapsed_pmd(struct mm_struct *mm, unsigned long addr);
extern void radix__flush_tlb_all(void);
extern void radix__flush_tlb_pte_p9_dd1(unsigned long old_pte, struct mm_struct *mm,
unsigned long address);
extern void radix__flush_tlb_lpid_page(unsigned int lpid,
unsigned long addr,

11
arch/powerpc/include/asm/book3s/tlbflush.h Normal file
View File

@ -0,0 +1,11 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_POWERPC_BOOK3S_TLBFLUSH_H
#define _ASM_POWERPC_BOOK3S_TLBFLUSH_H
#ifdef CONFIG_PPC64
#include <asm/book3s/64/tlbflush.h>
#else
#include <asm/book3s/32/tlbflush.h>
#endif
#endif /* _ASM_POWERPC_BOOK3S_TLBFLUSH_H */

1
arch/powerpc/include/asm/cacheflush.h
View File

@ -11,7 +11,6 @@
#include <linux/mm.h>
#include <asm/cputable.h>
#include <asm/cpu_has_feature.h>
/*
* No cache flushing is required when address mappings are changed,

2
arch/powerpc/include/asm/cmpxchg.h
View File

@ -5,8 +5,8 @@
#ifdef __KERNEL__
#include <linux/compiler.h>
#include <asm/synch.h>
#include <asm/asm-compat.h>
#include <linux/bug.h>
#include <asm/asm-405.h>
#ifdef __BIG_ENDIAN
#define BITOFF_CAL(size, off) ((sizeof(u32) - size - off) * BITS_PER_BYTE)

18
arch/powerpc/include/asm/code-patching-asm.h Normal file
View File

@ -0,0 +1,18 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2018, Michael Ellerman, IBM Corporation.
*/
#ifndef _ASM_POWERPC_CODE_PATCHING_ASM_H
#define _ASM_POWERPC_CODE_PATCHING_ASM_H
/* Define a "site" that can be patched */
.macro patch_site label name
.pushsection ".rodata"
.balign 4
.global \name
\name:
.4byte \label - .
.popsection
.endm
#endif /* _ASM_POWERPC_CODE_PATCHING_ASM_H */

3
arch/powerpc/include/asm/code-patching.h
View File

@ -14,6 +14,7 @@
#include <asm/ppc-opcode.h>
#include <linux/string.h>
#include <linux/kallsyms.h>
#include <asm/asm-compat.h>
/* Flags for create_branch:
* "b" == create_branch(addr, target, 0);
@ -32,6 +33,8 @@ unsigned int create_cond_branch(const unsigned int *addr,
int patch_branch(unsigned int *addr, unsigned long target, int flags);
int patch_instruction(unsigned int *addr, unsigned int instr);
int raw_patch_instruction(unsigned int *addr, unsigned int instr);
int patch_instruction_site(s32 *addr, unsigned int instr);
int patch_branch_site(s32 *site, unsigned long target, int flags);
int instr_is_relative_branch(unsigned int instr);
int instr_is_relative_link_branch(unsigned int instr);

13
arch/powerpc/include/asm/cpuidle.h
View File

@ -79,6 +79,19 @@ struct stop_sprs {
u64 mmcra;
};
#define PNV_IDLE_NAME_LEN 16
struct pnv_idle_states_t {
char name[PNV_IDLE_NAME_LEN];
u32 latency_ns;
u32 residency_ns;
u64 psscr_val;
u64 psscr_mask;
u32 flags;
bool valid;
};
extern struct pnv_idle_states_t *pnv_idle_states;
extern int nr_pnv_idle_states;
extern u32 pnv_fastsleep_workaround_at_entry[];
extern u32 pnv_fastsleep_workaround_at_exit[];

29
arch/powerpc/include/asm/cputable.h
View File

@ -4,9 +4,8 @@
#include <linux/types.h>
#include <asm/asm-compat.h>
#include <asm/feature-fixups.h>
#include <uapi/asm/cputable.h>
#include <asm/asm-const.h>
#ifndef __ASSEMBLY__
@ -210,7 +209,6 @@ static inline void cpu_feature_keys_init(void) { }
#define CPU_FTR_DAWR LONG_ASM_CONST(0x0000008000000000)
#define CPU_FTR_DABRX LONG_ASM_CONST(0x0000010000000000)
#define CPU_FTR_PMAO_BUG LONG_ASM_CONST(0x0000020000000000)
#define CPU_FTR_POWER9_DD1 LONG_ASM_CONST(0x0000040000000000)
#define CPU_FTR_POWER9_DD2_1 LONG_ASM_CONST(0x0000080000000000)
#define CPU_FTR_P9_TM_HV_ASSIST LONG_ASM_CONST(0x0000100000000000)
#define CPU_FTR_P9_TM_XER_SO_BUG LONG_ASM_CONST(0x0000200000000000)
@ -452,7 +450,6 @@ static inline void cpu_feature_keys_init(void) { }
CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \
CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP | CPU_FTR_PKEY)
#define CPU_FTRS_POWER8E (CPU_FTRS_POWER8 | CPU_FTR_PMAO_BUG)
#define CPU_FTRS_POWER8_DD1 (CPU_FTRS_POWER8 & ~CPU_FTR_DBELL)
#define CPU_FTRS_POWER9 (CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\
CPU_FTR_MMCRA | CPU_FTR_SMT | \
@ -464,8 +461,6 @@ static inline void cpu_feature_keys_init(void) { }
CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | CPU_FTR_PKEY | \
CPU_FTR_P9_TLBIE_BUG | CPU_FTR_P9_TIDR)
#define CPU_FTRS_POWER9_DD1 ((CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD1) & \
(~CPU_FTR_SAO))
#define CPU_FTRS_POWER9_DD2_0 CPU_FTRS_POWER9
#define CPU_FTRS_POWER9_DD2_1 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD2_1)
#define CPU_FTRS_POWER9_DD2_2 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD2_1 | \
@ -488,17 +483,15 @@ static inline void cpu_feature_keys_init(void) { }
#ifdef CONFIG_CPU_LITTLE_ENDIAN
#define CPU_FTRS_POSSIBLE \
(CPU_FTRS_POWER7 | CPU_FTRS_POWER8E | CPU_FTRS_POWER8 | \
CPU_FTRS_POWER8_DD1 | CPU_FTR_ALTIVEC_COMP | CPU_FTR_VSX_COMP | \
CPU_FTRS_POWER9 | CPU_FTRS_POWER9_DD1 | CPU_FTRS_POWER9_DD2_1 | \
CPU_FTRS_POWER9_DD2_2)
CPU_FTR_ALTIVEC_COMP | CPU_FTR_VSX_COMP | CPU_FTRS_POWER9 | \
CPU_FTRS_POWER9_DD2_1 | CPU_FTRS_POWER9_DD2_2)
#else
#define CPU_FTRS_POSSIBLE \
(CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | \
CPU_FTRS_POWER6 | CPU_FTRS_POWER7 | CPU_FTRS_POWER8E | \
CPU_FTRS_POWER8 | CPU_FTRS_POWER8_DD1 | CPU_FTRS_CELL | \
CPU_FTRS_PA6T | CPU_FTR_VSX_COMP | CPU_FTR_ALTIVEC_COMP | \
CPU_FTRS_POWER9 | CPU_FTRS_POWER9_DD1 | CPU_FTRS_POWER9_DD2_1 | \
CPU_FTRS_POWER9_DD2_2)
CPU_FTRS_POWER8 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \
CPU_FTR_VSX_COMP | CPU_FTR_ALTIVEC_COMP | CPU_FTRS_POWER9 | \
CPU_FTRS_POWER9_DD2_1 | CPU_FTRS_POWER9_DD2_2)
#endif /* CONFIG_CPU_LITTLE_ENDIAN */
#endif
#else
@ -566,17 +559,15 @@ enum {
#ifdef CONFIG_CPU_LITTLE_ENDIAN
#define CPU_FTRS_ALWAYS \
(CPU_FTRS_POSSIBLE & ~CPU_FTR_HVMODE & CPU_FTRS_POWER7 & \
CPU_FTRS_POWER8E & CPU_FTRS_POWER8 & CPU_FTRS_POWER8_DD1 & \
CPU_FTRS_POWER9 & CPU_FTRS_POWER9_DD1 & CPU_FTRS_POWER9_DD2_1 & \
CPU_FTRS_DT_CPU_BASE)
CPU_FTRS_POWER8E & CPU_FTRS_POWER8 & CPU_FTRS_POWER9 & \
CPU_FTRS_POWER9_DD2_1 & CPU_FTRS_DT_CPU_BASE)
#else
#define CPU_FTRS_ALWAYS \
(CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & \
CPU_FTRS_POWER6 & CPU_FTRS_POWER7 & CPU_FTRS_CELL & \
CPU_FTRS_PA6T & CPU_FTRS_POWER8 & CPU_FTRS_POWER8E & \
CPU_FTRS_POWER8_DD1 & ~CPU_FTR_HVMODE & CPU_FTRS_POSSIBLE & \
CPU_FTRS_POWER9 & CPU_FTRS_POWER9_DD1 & CPU_FTRS_POWER9_DD2_1 & \
CPU_FTRS_DT_CPU_BASE)
~CPU_FTR_HVMODE & CPU_FTRS_POSSIBLE & CPU_FTRS_POWER9 & \
CPU_FTRS_POWER9_DD2_1 & CPU_FTRS_DT_CPU_BASE)
#endif /* CONFIG_CPU_LITTLE_ENDIAN */
#endif
#else

1
arch/powerpc/include/asm/cputime.h
View File

@ -23,7 +23,6 @@
#include <asm/div64.h>
#include <asm/time.h>
#include <asm/param.h>
#include <asm/cpu_has_feature.h>
typedef u64 __nocast cputime_t;
typedef u64 __nocast cputime64_t;

2
arch/powerpc/include/asm/dbell.h
View File

@ -16,7 +16,7 @@
#include <linux/threads.h>
#include <asm/ppc-opcode.h>
#include <asm/cpu_has_feature.h>
#include <asm/feature-fixups.h>
#define PPC_DBELL_MSG_BRDCAST (0x04000000)
#define PPC_DBELL_TYPE(x) (((x) & 0xf) << (63-36))

1
arch/powerpc/include/asm/dcr-native.h
View File

@ -25,6 +25,7 @@
#include <linux/spinlock.h>
#include <asm/cputable.h>
#include <asm/cpu_has_feature.h>
#include <linux/stringify.h>
typedef struct {
unsigned int base;

1
arch/powerpc/include/asm/debug.h
View File

@ -45,7 +45,6 @@ static inline int debugger_break_match(struct pt_regs *regs) { return 0; }
static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
#endif
void set_breakpoint(struct arch_hw_breakpoint *brk);
void __set_breakpoint(struct arch_hw_breakpoint *brk);
bool ppc_breakpoint_available(void);
#ifdef CONFIG_PPC_ADV_DEBUG_REGS

2
arch/powerpc/include/asm/dt_cpu_ftrs.h
View File

@ -10,8 +10,6 @@
*/
#include <linux/types.h>
#include <asm/asm-compat.h>
#include <asm/feature-fixups.h>
#include <uapi/asm/cputable.h>
#ifdef CONFIG_PPC_DT_CPU_FTRS

15
arch/powerpc/include/asm/eeh.h
View File

@ -36,13 +36,14 @@ struct pci_dn;
#ifdef CONFIG_EEH
/* EEH subsystem flags */
#define EEH_ENABLED 0x01 /* EEH enabled */
#define EEH_FORCE_DISABLED 0x02 /* EEH disabled */
#define EEH_PROBE_MODE_DEV 0x04 /* From PCI device */
#define EEH_PROBE_MODE_DEVTREE 0x08 /* From device tree */
#define EEH_VALID_PE_ZERO 0x10 /* PE#0 is valid */
#define EEH_ENABLE_IO_FOR_LOG 0x20 /* Enable IO for log */
#define EEH_EARLY_DUMP_LOG 0x40 /* Dump log immediately */
#define EEH_ENABLED 0x01 /* EEH enabled */
#define EEH_FORCE_DISABLED 0x02 /* EEH disabled */
#define EEH_PROBE_MODE_DEV 0x04 /* From PCI device */
#define EEH_PROBE_MODE_DEVTREE 0x08 /* From device tree */
#define EEH_VALID_PE_ZERO 0x10 /* PE#0 is valid */
#define EEH_ENABLE_IO_FOR_LOG 0x20 /* Enable IO for log */
#define EEH_EARLY_DUMP_LOG 0x40 /* Dump log immediately */
#define EEH_POSTPONED_PROBE 0x80 /* Powernv may postpone device probe */
/*
* Delay for PE reset, all in ms

118
arch/powerpc/include/asm/exception-64s.h
View File

@ -35,6 +35,7 @@
* implementations as possible.
*/
#include <asm/head-64.h>
#include <asm/feature-fixups.h>
/* PACA save area offsets (exgen, exmc, etc) */
#define EX_R9 0
@ -156,7 +157,7 @@
b hrfi_flush_fallback
#ifdef CONFIG_RELOCATABLE
#define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \
#define __EXCEPTION_PROLOG_2_RELON(label, h) \
mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \
LOAD_HANDLER(r12,label); \
mtctr r12; \
@ -166,25 +167,26 @@
bctr;
#else
/* If not relocatable, we can jump directly -- and save messing with LR */
#define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \
#define __EXCEPTION_PROLOG_2_RELON(label, h) \
mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \
mfspr r12,SPRN_##h##SRR1; /* and SRR1 */ \
li r10,MSR_RI; \
mtmsrd r10,1; /* Set RI (EE=0) */ \
b label;
#endif
#define EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \
__EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \
#define EXCEPTION_PROLOG_2_RELON(label, h) \
__EXCEPTION_PROLOG_2_RELON(label, h)
/*
* As EXCEPTION_PROLOG_PSERIES(), except we've already got relocation on
* so no need to rfid. Save lr in case we're CONFIG_RELOCATABLE, in which
* case EXCEPTION_RELON_PROLOG_PSERIES_1 will be using lr.
* As EXCEPTION_PROLOG(), except we've already got relocation on so no need to
* rfid. Save LR in case we're CONFIG_RELOCATABLE, in which case
* EXCEPTION_PROLOG_2_RELON will be using LR.
*/
#define EXCEPTION_RELON_PROLOG_PSERIES(area, label, h, extra, vec) \
#define EXCEPTION_RELON_PROLOG(area, label, h, extra, vec) \
SET_SCRATCH0(r13); /* save r13 */ \
EXCEPTION_PROLOG_0(area); \
EXCEPTION_PROLOG_1(area, extra, vec); \
EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)
EXCEPTION_PROLOG_2_RELON(label, h)
/*
* We're short on space and time in the exception prolog, so we can't
@ -315,7 +317,7 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
#define EXCEPTION_PROLOG_1(area, extra, vec) \
_EXCEPTION_PROLOG_1(area, extra, vec)
#define __EXCEPTION_PROLOG_PSERIES_1(label, h) \
#define __EXCEPTION_PROLOG_2(label, h) \
ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \
mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \
LOAD_HANDLER(r12,label) \
@ -324,11 +326,11 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
mtspr SPRN_##h##SRR1,r10; \
h##RFI_TO_KERNEL; \
b . /* prevent speculative execution */
#define EXCEPTION_PROLOG_PSERIES_1(label, h) \
__EXCEPTION_PROLOG_PSERIES_1(label, h)
#define EXCEPTION_PROLOG_2(label, h) \
__EXCEPTION_PROLOG_2(label, h)
/* _NORI variant keeps MSR_RI clear */
#define __EXCEPTION_PROLOG_PSERIES_1_NORI(label, h) \
#define __EXCEPTION_PROLOG_2_NORI(label, h) \
ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \
xori r10,r10,MSR_RI; /* Clear MSR_RI */ \
mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \
@ -339,13 +341,14 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
h##RFI_TO_KERNEL; \
b . /* prevent speculative execution */
#define EXCEPTION_PROLOG_PSERIES_1_NORI(label, h) \
__EXCEPTION_PROLOG_PSERIES_1_NORI(label, h)
#define EXCEPTION_PROLOG_2_NORI(label, h) \
__EXCEPTION_PROLOG_2_NORI(label, h)
#define EXCEPTION_PROLOG_PSERIES(area, label, h, extra, vec) \
#define EXCEPTION_PROLOG(area, label, h, extra, vec) \
SET_SCRATCH0(r13); /* save r13 */ \
EXCEPTION_PROLOG_0(area); \
EXCEPTION_PROLOG_1(area, extra, vec); \
EXCEPTION_PROLOG_PSERIES_1(label, h);
EXCEPTION_PROLOG_2(label, h);
#define __KVMTEST(h, n) \
lbz r10,HSTATE_IN_GUEST(r13); \
@ -416,10 +419,10 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
#endif
/* Do not enable RI */
#define EXCEPTION_PROLOG_PSERIES_NORI(area, label, h, extra, vec) \
#define EXCEPTION_PROLOG_NORI(area, label, h, extra, vec) \
EXCEPTION_PROLOG_0(area); \
EXCEPTION_PROLOG_1(area, extra, vec); \
EXCEPTION_PROLOG_PSERIES_1_NORI(label, h);
EXCEPTION_PROLOG_2_NORI(label, h);
#define __KVM_HANDLER(area, h, n) \
@ -550,10 +553,8 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
/*
* Exception vectors.
*/
#define STD_EXCEPTION_PSERIES(vec, label) \
SET_SCRATCH0(r13); /* save r13 */ \
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label, \
EXC_STD, KVMTEST_PR, vec); \
#define STD_EXCEPTION(vec, label) \
EXCEPTION_PROLOG(PACA_EXGEN, label, EXC_STD, KVMTEST_PR, vec);
/* Version of above for when we have to branch out-of-line */
#define __OOL_EXCEPTION(vec, label, hdlr) \
@ -561,36 +562,31 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
EXCEPTION_PROLOG_0(PACA_EXGEN) \
b hdlr;
#define STD_EXCEPTION_PSERIES_OOL(vec, label) \
#define STD_EXCEPTION_OOL(vec, label) \
EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_PR, vec); \
EXCEPTION_PROLOG_PSERIES_1(label, EXC_STD)
EXCEPTION_PROLOG_2(label, EXC_STD)
#define STD_EXCEPTION_HV(loc, vec, label) \
SET_SCRATCH0(r13); /* save r13 */ \
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label, \
EXC_HV, KVMTEST_HV, vec);
EXCEPTION_PROLOG(PACA_EXGEN, label, EXC_HV, KVMTEST_HV, vec);
#define STD_EXCEPTION_HV_OOL(vec, label) \
EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_HV, vec); \
EXCEPTION_PROLOG_PSERIES_1(label, EXC_HV)
EXCEPTION_PROLOG_2(label, EXC_HV)
#define STD_RELON_EXCEPTION_PSERIES(loc, vec, label) \
#define STD_RELON_EXCEPTION(loc, vec, label) \
/* No guest interrupts come through here */ \
SET_SCRATCH0(r13); /* save r13 */ \
EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label, EXC_STD, NOTEST, vec);
EXCEPTION_RELON_PROLOG(PACA_EXGEN, label, EXC_STD, NOTEST, vec);
#define STD_RELON_EXCEPTION_PSERIES_OOL(vec, label) \
#define STD_RELON_EXCEPTION_OOL(vec, label) \
EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, vec); \
EXCEPTION_RELON_PROLOG_PSERIES_1(label, EXC_STD)
EXCEPTION_PROLOG_2_RELON(label, EXC_STD)
#define STD_RELON_EXCEPTION_HV(loc, vec, label) \
SET_SCRATCH0(r13); /* save r13 */ \
EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label, \
EXC_HV, KVMTEST_HV, vec);
EXCEPTION_RELON_PROLOG(PACA_EXGEN, label, EXC_HV, KVMTEST_HV, vec);
#define STD_RELON_EXCEPTION_HV_OOL(vec, label) \
EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_HV, vec); \
EXCEPTION_RELON_PROLOG_PSERIES_1(label, EXC_HV)
EXCEPTION_PROLOG_2_RELON(label, EXC_HV)
/* This associate vector numbers with bits in paca->irq_happened */
#define SOFTEN_VALUE_0x500 PACA_IRQ_EE
@ -627,55 +623,45 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
#define SOFTEN_NOTEST_PR(vec, bitmask) _SOFTEN_TEST(EXC_STD, vec, bitmask)
#define SOFTEN_NOTEST_HV(vec, bitmask) _SOFTEN_TEST(EXC_HV, vec, bitmask)
#define __MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra, bitmask) \
#define __MASKABLE_EXCEPTION(vec, label, h, extra, bitmask) \
SET_SCRATCH0(r13); /* save r13 */ \
EXCEPTION_PROLOG_0(PACA_EXGEN); \
MASKABLE_EXCEPTION_PROLOG_1(PACA_EXGEN, extra, vec, bitmask); \
EXCEPTION_PROLOG_PSERIES_1(label, h);
EXCEPTION_PROLOG_2(label, h);
#define _MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra, bitmask) \
__MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra, bitmask)
#define MASKABLE_EXCEPTION(vec, label, bitmask) \
__MASKABLE_EXCEPTION(vec, label, EXC_STD, SOFTEN_TEST_PR, bitmask)
#define MASKABLE_EXCEPTION_PSERIES(loc, vec, label, bitmask) \
_MASKABLE_EXCEPTION_PSERIES(vec, label, \
EXC_STD, SOFTEN_TEST_PR, bitmask)
#define MASKABLE_EXCEPTION_PSERIES_OOL(vec, label, bitmask) \
#define MASKABLE_EXCEPTION_OOL(vec, label, bitmask) \
MASKABLE_EXCEPTION_PROLOG_1(PACA_EXGEN, SOFTEN_TEST_PR, vec, bitmask);\
EXCEPTION_PROLOG_PSERIES_1(label, EXC_STD)
EXCEPTION_PROLOG_2(label, EXC_STD)
#define MASKABLE_EXCEPTION_HV(loc, vec, label, bitmask) \
_MASKABLE_EXCEPTION_PSERIES(vec, label, \
EXC_HV, SOFTEN_TEST_HV, bitmask)
#define MASKABLE_EXCEPTION_HV(vec, label, bitmask) \
__MASKABLE_EXCEPTION(vec, label, EXC_HV, SOFTEN_TEST_HV, bitmask)
#define MASKABLE_EXCEPTION_HV_OOL(vec, label, bitmask) \
MASKABLE_EXCEPTION_PROLOG_1(PACA_EXGEN, SOFTEN_TEST_HV, vec, bitmask);\
EXCEPTION_PROLOG_PSERIES_1(label, EXC_HV)
EXCEPTION_PROLOG_2(label, EXC_HV)
#define __MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra, bitmask) \
#define __MASKABLE_RELON_EXCEPTION(vec, label, h, extra, bitmask) \
SET_SCRATCH0(r13); /* save r13 */ \
EXCEPTION_PROLOG_0(PACA_EXGEN); \
MASKABLE_EXCEPTION_PROLOG_1(PACA_EXGEN, extra, vec, bitmask); \
EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)
EXCEPTION_PROLOG_2_RELON(label, h)
#define _MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra, bitmask)\
__MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra, bitmask)
#define MASKABLE_RELON_EXCEPTION(vec, label, bitmask) \
__MASKABLE_RELON_EXCEPTION(vec, label, EXC_STD, SOFTEN_NOTEST_PR, bitmask)
#define MASKABLE_RELON_EXCEPTION_PSERIES(loc, vec, label, bitmask) \
_MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, \
EXC_STD, SOFTEN_NOTEST_PR, bitmask)
#define MASKABLE_RELON_EXCEPTION_PSERIES_OOL(vec, label, bitmask) \
#define MASKABLE_RELON_EXCEPTION_OOL(vec, label, bitmask) \
MASKABLE_EXCEPTION_PROLOG_1(PACA_EXGEN, SOFTEN_NOTEST_PR, vec, bitmask);\
EXCEPTION_PROLOG_PSERIES_1(label, EXC_STD);
EXCEPTION_PROLOG_2(label, EXC_STD);
#define MASKABLE_RELON_EXCEPTION_HV(loc, vec, label, bitmask) \
_MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, \
EXC_HV, SOFTEN_TEST_HV, bitmask)
#define MASKABLE_RELON_EXCEPTION_HV(vec, label, bitmask) \
__MASKABLE_RELON_EXCEPTION(vec, label, EXC_HV, SOFTEN_TEST_HV, bitmask)
#define MASKABLE_RELON_EXCEPTION_HV_OOL(vec, label, bitmask) \
MASKABLE_EXCEPTION_PROLOG_1(PACA_EXGEN, SOFTEN_TEST_HV, vec, bitmask);\
EXCEPTION_RELON_PROLOG_PSERIES_1(label, EXC_HV)
EXCEPTION_PROLOG_2_RELON(label, EXC_HV)
/*
* Our exception common code can be passed various "additions"

3
arch/powerpc/include/asm/fadump.h
View File

@ -195,9 +195,6 @@ struct fadump_crash_info_header {
struct cpumask online_mask;
};
/* Crash memory ranges */
#define INIT_CRASHMEM_RANGES (INIT_MEMBLOCK_REGIONS + 2)
struct fad_crash_memory_ranges {
unsigned long long base;
unsigned long long size;

2
arch/powerpc/include/asm/feature-fixups.h
View File

@ -1,6 +1,8 @@
#ifndef __ASM_POWERPC_FEATURE_FIXUPS_H
#define __ASM_POWERPC_FEATURE_FIXUPS_H
#include <asm/asm-const.h>
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License

3
arch/powerpc/include/asm/firmware.h
View File

@ -14,8 +14,7 @@
#ifdef __KERNEL__
#include <asm/asm-compat.h>
#include <asm/feature-fixups.h>
#include <asm/asm-const.h>
/* firmware feature bitmask values */

1
arch/powerpc/include/asm/fixmap.h
View File

@ -15,7 +15,6 @@
#define _ASM_FIXMAP_H
#ifndef __ASSEMBLY__
#include <linux/kernel.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#ifdef CONFIG_HIGHMEM

2
arch/powerpc/include/asm/futex.h
View File

@ -8,7 +8,7 @@
#include <linux/uaccess.h>
#include <asm/errno.h>
#include <asm/synch.h>
#include <asm/asm-compat.h>
#include <asm/asm-405.h>
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
__asm__ __volatile ( \

16
arch/powerpc/include/asm/head-64.h
View File

@ -260,22 +260,22 @@ name:
#define EXC_REAL(name, start, size) \
EXC_REAL_BEGIN(name, start, size); \
STD_EXCEPTION_PSERIES(start, name##_common); \
STD_EXCEPTION(start, name##_common); \
EXC_REAL_END(name, start, size);
#define EXC_VIRT(name, start, size, realvec) \
EXC_VIRT_BEGIN(name, start, size); \
STD_RELON_EXCEPTION_PSERIES(start, realvec, name##_common); \
STD_RELON_EXCEPTION(start, realvec, name##_common); \
EXC_VIRT_END(name, start, size);
#define EXC_REAL_MASKABLE(name, start, size, bitmask) \
EXC_REAL_BEGIN(name, start, size); \
MASKABLE_EXCEPTION_PSERIES(start, start, name##_common, bitmask);\
MASKABLE_EXCEPTION(start, name##_common, bitmask); \
EXC_REAL_END(name, start, size);
#define EXC_VIRT_MASKABLE(name, start, size, realvec, bitmask) \
EXC_VIRT_BEGIN(name, start, size); \
MASKABLE_RELON_EXCEPTION_PSERIES(start, realvec, name##_common, bitmask);\
MASKABLE_RELON_EXCEPTION(realvec, name##_common, bitmask); \
EXC_VIRT_END(name, start, size);
#define EXC_REAL_HV(name, start, size) \
@ -295,7 +295,7 @@ name:
#define __TRAMP_REAL_OOL(name, vec) \
TRAMP_REAL_BEGIN(tramp_real_##name); \
STD_EXCEPTION_PSERIES_OOL(vec, name##_common); \
STD_EXCEPTION_OOL(vec, name##_common);
#define EXC_REAL_OOL(name, start, size) \
__EXC_REAL_OOL(name, start, size); \
@ -306,7 +306,7 @@ name:
#define __TRAMP_REAL_OOL_MASKABLE(name, vec, bitmask) \
TRAMP_REAL_BEGIN(tramp_real_##name); \
MASKABLE_EXCEPTION_PSERIES_OOL(vec, name##_common, bitmask); \
MASKABLE_EXCEPTION_OOL(vec, name##_common, bitmask);
#define EXC_REAL_OOL_MASKABLE(name, start, size, bitmask) \
__EXC_REAL_OOL_MASKABLE(name, start, size); \
@ -346,7 +346,7 @@ name:
#define __TRAMP_VIRT_OOL(name, realvec) \
TRAMP_VIRT_BEGIN(tramp_virt_##name); \
STD_RELON_EXCEPTION_PSERIES_OOL(realvec, name##_common); \
STD_RELON_EXCEPTION_OOL(realvec, name##_common);
#define EXC_VIRT_OOL(name, start, size, realvec) \
__EXC_VIRT_OOL(name, start, size); \
@ -357,7 +357,7 @@ name:
#define __TRAMP_VIRT_OOL_MASKABLE(name, realvec, bitmask) \
TRAMP_VIRT_BEGIN(tramp_virt_##name); \
MASKABLE_RELON_EXCEPTION_PSERIES_OOL(realvec, name##_common, bitmask);\
MASKABLE_RELON_EXCEPTION_OOL(realvec, name##_common, bitmask);
#define EXC_VIRT_OOL_MASKABLE(name, start, size, realvec, bitmask) \
__EXC_VIRT_OOL_MASKABLE(name, start, size); \

2
arch/powerpc/include/asm/highmem.h
View File

@ -25,7 +25,7 @@
#include <linux/interrupt.h>
#include <asm/kmap_types.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
#include <asm/page.h>
#include <asm/fixmap.h>

3
arch/powerpc/include/asm/hugetlb.h
View File

@ -84,9 +84,6 @@ static inline pte_t *hugepte_offset(hugepd_t hpd, unsigned long addr,
return dir + idx;
}
pte_t *huge_pte_offset_and_shift(struct mm_struct *mm,
unsigned long addr, unsigned *shift);
void flush_dcache_icache_hugepage(struct page *page);
int slice_is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,

2
arch/powerpc/include/asm/hvcall.h
View File

@ -342,10 +342,12 @@
#define H_CPU_CHAR_BRANCH_HINTS_HONORED (1ull << 58) // IBM bit 5
#define H_CPU_CHAR_THREAD_RECONFIG_CTRL (1ull << 57) // IBM bit 6
#define H_CPU_CHAR_COUNT_CACHE_DISABLED (1ull << 56) // IBM bit 7
#define H_CPU_CHAR_BCCTR_FLUSH_ASSIST (1ull << 54) // IBM bit 9
#define H_CPU_BEHAV_FAVOUR_SECURITY (1ull << 63) // IBM bit 0
#define H_CPU_BEHAV_L1D_FLUSH_PR (1ull << 62) // IBM bit 1
#define H_CPU_BEHAV_BNDS_CHK_SPEC_BAR (1ull << 61) // IBM bit 2
#define H_CPU_BEHAV_FLUSH_COUNT_CACHE (1ull << 58) // IBM bit 5
/* Flag values used in H_REGISTER_PROC_TBL hcall */
#define PROC_TABLE_OP_MASK 0x18

1
arch/powerpc/include/asm/hw_breakpoint.h
View File

@ -56,6 +56,7 @@ struct perf_event_attr;
struct perf_event;
struct pmu;
struct perf_sample_data;
struct task_struct;
#define HW_BREAKPOINT_ALIGN 0x7

10
arch/powerpc/include/asm/hw_irq.h
View File

@ -253,14 +253,16 @@ static inline bool lazy_irq_pending(void)
/*
* This is called by asynchronous interrupts to conditionally
* re-enable hard interrupts when soft-disabled after having
* cleared the source of the interrupt
* re-enable hard interrupts after having cleared the source
* of the interrupt. They are kept disabled if there is a different
* soft-masked interrupt pending that requires hard masking.
*/
static inline void may_hard_irq_enable(void)
{
get_paca()->irq_happened &= ~PACA_IRQ_HARD_DIS;
if (!(get_paca()->irq_happened & PACA_IRQ_MUST_HARD_MASK))
if (!(get_paca()->irq_happened & PACA_IRQ_MUST_HARD_MASK)) {
get_paca()->irq_happened &= ~PACA_IRQ_HARD_DIS;
__hard_irq_enable();
}
}
static inline bool arch_irq_disabled_regs(struct pt_regs *regs)

12
arch/powerpc/include/asm/iommu.h
View File

@ -30,6 +30,7 @@
#include <asm/machdep.h>
#include <asm/types.h>
#include <asm/pci-bridge.h>
#include <asm/asm-const.h>
#define IOMMU_PAGE_SHIFT_4K 12
#define IOMMU_PAGE_SIZE_4K (ASM_CONST(1) << IOMMU_PAGE_SHIFT_4K)
@ -69,6 +70,8 @@ struct iommu_table_ops {
long index,
unsigned long *hpa,
enum dma_data_direction *direction);
__be64 *(*useraddrptr)(struct iommu_table *tbl, long index, bool alloc);
#endif
void (*clear)(struct iommu_table *tbl,
long index, long npages);
@ -117,15 +120,16 @@ struct iommu_table {
unsigned long *it_map; /* A simple allocation bitmap for now */
unsigned long it_page_shift;/* table iommu page size */
struct list_head it_group_list;/* List of iommu_table_group_link */
unsigned long *it_userspace; /* userspace view of the table */
__be64 *it_userspace; /* userspace view of the table */
struct iommu_table_ops *it_ops;
struct kref it_kref;
int it_nid;
};
#define IOMMU_TABLE_USERSPACE_ENTRY_RM(tbl, entry) \
((tbl)->it_ops->useraddrptr((tbl), (entry), false))
#define IOMMU_TABLE_USERSPACE_ENTRY(tbl, entry) \
((tbl)->it_userspace ? \
&((tbl)->it_userspace[(entry) - (tbl)->it_offset]) : \
NULL)
((tbl)->it_ops->useraddrptr((tbl), (entry), true))
/* Pure 2^n version of get_order */
static inline __attribute_const__

2
arch/powerpc/include/asm/jump_label.h
View File

@ -14,7 +14,7 @@
#include <linux/types.h>
#include <asm/feature-fixups.h>
#include <asm/asm-compat.h>
#include <asm/asm-const.h>
#define JUMP_ENTRY_TYPE stringify_in_c(FTR_ENTRY_LONG)
#define JUMP_LABEL_NOP_SIZE 4

2
arch/powerpc/include/asm/kvm_booke_hv_asm.h
View File

@ -9,6 +9,8 @@
#ifndef ASM_KVM_BOOKE_HV_ASM_H
#define ASM_KVM_BOOKE_HV_ASM_H
#include <asm/feature-fixups.h>
#ifdef __ASSEMBLY__
/*

10
arch/powerpc/include/asm/mmu-44x.h
View File

@ -5,7 +5,7 @@
* PPC440 support
*/
#include <asm/page.h>
#include <asm/asm-const.h>
#define PPC44x_MMUCR_TID 0x000000ff
#define PPC44x_MMUCR_STS 0x00010000
@ -124,19 +124,19 @@ typedef struct {
/* Size of the TLBs used for pinning in lowmem */
#define PPC_PIN_SIZE (1 << 28) /* 256M */
#if (PAGE_SHIFT == 12)
#if defined(CONFIG_PPC_4K_PAGES)
#define PPC44x_TLBE_SIZE PPC44x_TLB_4K
#define PPC47x_TLBE_SIZE PPC47x_TLB0_4K
#define mmu_virtual_psize MMU_PAGE_4K
#elif (PAGE_SHIFT == 14)
#elif defined(CONFIG_PPC_16K_PAGES)
#define PPC44x_TLBE_SIZE PPC44x_TLB_16K
#define PPC47x_TLBE_SIZE PPC47x_TLB0_16K
#define mmu_virtual_psize MMU_PAGE_16K
#elif (PAGE_SHIFT == 16)
#elif defined(CONFIG_PPC_64K_PAGES)
#define PPC44x_TLBE_SIZE PPC44x_TLB_64K
#define PPC47x_TLBE_SIZE PPC47x_TLB0_64K
#define mmu_virtual_psize MMU_PAGE_64K
#elif (PAGE_SHIFT == 18)
#elif defined(CONFIG_PPC_256K_PAGES)
#define PPC44x_TLBE_SIZE PPC44x_TLB_256K
#define mmu_virtual_psize MMU_PAGE_256K
#else

3
arch/powerpc/include/asm/mmu.h
View File

@ -5,8 +5,7 @@
#include <linux/types.h>
#include <asm/asm-compat.h>
#include <asm/feature-fixups.h>
#include <asm/asm-const.h>
/*
* MMU features bit definitions

7
arch/powerpc/include/asm/nohash/32/pgtable.h
View File

@ -8,7 +8,8 @@
#ifndef __ASSEMBLY__
#include <linux/sched.h>
#include <linux/threads.h>
#include <asm/io.h> /* For sub-arch specific PPC_PIN_SIZE */
#include <asm/mmu.h> /* For sub-arch specific PPC_PIN_SIZE */
#include <asm/asm-405.h>
extern unsigned long ioremap_bot;
@ -222,10 +223,6 @@ static inline unsigned long long pte_update(pte_t *p,
}
#endif /* CONFIG_PTE_64BIT */
/*
* 2.6 calls this without flushing the TLB entry; this is wrong
* for our hash-based implementation, we fix that up here.
*/
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
{

19
arch/powerpc/include/asm/nohash/64/pgtable.h
View File

@ -3,11 +3,12 @@
#define _ASM_POWERPC_NOHASH_64_PGTABLE_H
/*
* This file contains the functions and defines necessary to modify and use
* the ppc64 hashed page table.
* the ppc64 non-hashed page table.
*/
#include <asm/nohash/64/pgtable-4k.h>
#include <asm/barrier.h>
#include <asm/asm-const.h>
#ifdef CONFIG_PPC_64K_PAGES
#error "Page size not supported"
@ -37,7 +38,7 @@
/*
* The vmalloc space starts at the beginning of that region, and
* occupies half of it on hash CPUs and a quarter of it on Book3E
* occupies a quarter of it on Book3E
* (we keep a quarter for the virtual memmap)
*/
#define VMALLOC_START KERN_VIRT_START
@ -77,7 +78,7 @@
/*
* Defines the address of the vmemap area, in its own region on
* hash table CPUs and after the vmalloc space on Book3E
* after the vmalloc space on Book3E
*/
#define VMEMMAP_BASE VMALLOC_END
#define VMEMMAP_END KERN_IO_START
@ -247,14 +248,6 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
pte_update(mm, addr, ptep, _PAGE_RW, 0, 1);
}
/*
* We currently remove entries from the hashtable regardless of whether
* the entry was young or dirty. The generic routines only flush if the
* entry was young or dirty which is not good enough.
*
* We should be more intelligent about this but for the moment we override
* these functions and force a tlb flush unconditionally
*/
#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
#define ptep_clear_flush_young(__vma, __address, __ptep) \
({ \
@ -278,9 +271,7 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
}
/* Set the dirty and/or accessed bits atomically in a linux PTE, this
* function doesn't need to flush the hash entry
*/
/* Set the dirty and/or accessed bits atomically in a linux PTE */
static inline void __ptep_set_access_flags(struct vm_area_struct *vma,
pte_t *ptep, pte_t entry,
unsigned long address,

53
arch/powerpc/include/asm/nohash/tlbflush.h Normal file
View File

@ -0,0 +1,53 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_POWERPC_NOHASH_TLBFLUSH_H
#define _ASM_POWERPC_NOHASH_TLBFLUSH_H
/*
* TLB flushing:
*
* - flush_tlb_mm(mm) flushes the specified mm context TLB's
* - flush_tlb_page(vma, vmaddr) flushes one page
* - local_flush_tlb_mm(mm, full) flushes the specified mm context on
* the local processor
* - local_flush_tlb_page(vma, vmaddr) flushes one page on the local processor
* - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB
* - flush_tlb_range(vma, start, end) flushes a range of pages
* - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
*
*/
/*
* TLB flushing for software loaded TLB chips
*
* TODO: (CONFIG_FSL_BOOKE) determine if flush_tlb_range &
* flush_tlb_kernel_range are best implemented as tlbia vs
* specific tlbie's
*/
struct vm_area_struct;
struct mm_struct;
#define MMU_NO_CONTEXT ((unsigned int)-1)
extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
extern void local_flush_tlb_mm(struct mm_struct *mm);
extern void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
extern void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
int tsize, int ind);
#ifdef CONFIG_SMP
extern void flush_tlb_mm(struct mm_struct *mm);
extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
extern void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
int tsize, int ind);
#else
#define flush_tlb_mm(mm) local_flush_tlb_mm(mm)
#define flush_tlb_page(vma,addr) local_flush_tlb_page(vma,addr)
#define __flush_tlb_page(mm,addr,p,i) __local_flush_tlb_page(mm,addr,p,i)
#endif
#endif /* _ASM_POWERPC_NOHASH_TLBFLUSH_H */

4
arch/powerpc/include/asm/opal-api.h
View File

@ -206,9 +206,11 @@
#define OPAL_NPU_SPA_CLEAR_CACHE 160
#define OPAL_NPU_TL_SET 161
#define OPAL_SENSOR_READ_U64 162
#define OPAL_SENSOR_GROUP_ENABLE 163
#define OPAL_PCI_GET_PBCQ_TUNNEL_BAR 164
#define OPAL_PCI_SET_PBCQ_TUNNEL_BAR 165
#define OPAL_LAST 165
#define OPAL_NX_COPROC_INIT 167
#define OPAL_LAST 167
#define QUIESCE_HOLD 1 /* Spin all calls at entry */
#define QUIESCE_REJECT 2 /* Fail all calls with OPAL_BUSY */

5
arch/powerpc/include/asm/opal.h
View File

@ -292,6 +292,8 @@ int opal_set_powercap(u32 handle, int token, u32 pcap);
int opal_get_power_shift_ratio(u32 handle, int token, u32 *psr);
int opal_set_power_shift_ratio(u32 handle, int token, u32 psr);
int opal_sensor_group_clear(u32 group_hndl, int token);
int opal_sensor_group_enable(u32 group_hndl, int token, bool enable);
int opal_nx_coproc_init(uint32_t chip_id, uint32_t ct);
s64 opal_signal_system_reset(s32 cpu);
s64 opal_quiesce(u64 shutdown_type, s32 cpu);
@ -305,6 +307,8 @@ extern void opal_configure_cores(void);
extern int opal_get_chars(uint32_t vtermno, char *buf, int count);
extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len);
extern int opal_put_chars_atomic(uint32_t vtermno, const char *buf, int total_len);
extern int opal_flush_console(uint32_t vtermno);
extern void hvc_opal_init_early(void);
@ -326,6 +330,7 @@ extern int opal_async_wait_response_interruptible(uint64_t token,
struct opal_msg *msg);
extern int opal_get_sensor_data(u32 sensor_hndl, u32 *sensor_data);
extern int opal_get_sensor_data_u64(u32 sensor_hndl, u64 *sensor_data);
extern int sensor_group_enable(u32 grp_hndl, bool enable);
struct rtc_time;
extern time64_t opal_get_boot_time(void);

8
arch/powerpc/include/asm/paca.h
View File

@ -187,11 +187,6 @@ struct paca_struct {
u8 subcore_sibling_mask;
/* Flag to request this thread not to stop */
atomic_t dont_stop;
/*
* Pointer to an array which contains pointer
* to the sibling threads' paca.
*/
struct paca_struct **thread_sibling_pacas;
/* The PSSCR value that the kernel requested before going to stop */
u64 requested_psscr;
@ -252,6 +247,9 @@ struct paca_struct {
void *rfi_flush_fallback_area;
u64 l1d_flush_size;
#endif
#ifdef CONFIG_PPC_PSERIES
u8 *mce_data_buf; /* buffer to hold per cpu rtas errlog */
#endif /* CONFIG_PPC_PSERIES */
} ____cacheline_aligned;
extern void copy_mm_to_paca(struct mm_struct *mm);

3
arch/powerpc/include/asm/page.h
View File

@ -16,8 +16,7 @@
#else
#include <asm/types.h>
#endif
#include <asm/asm-compat.h>
#include <asm/kdump.h>
#include <asm/asm-const.h>
/*
* On regular PPC32 page size is 4K (but we support 4K/16K/64K/256K pages

2
arch/powerpc/include/asm/page_64.h
View File

@ -10,6 +10,8 @@
* 2 of the License, or (at your option) any later version.
*/
#include <asm/asm-const.h>
/*
* We always define HW_PAGE_SHIFT to 12 as use of 64K pages remains Linux
* specific, every notion of page number shared with the firmware, TCEs,

38
arch/powerpc/include/asm/pkeys.h
View File

@ -13,7 +13,8 @@
DECLARE_STATIC_KEY_TRUE(pkey_disabled);
extern int pkeys_total; /* total pkeys as per device tree */
extern u32 initial_allocation_mask; /* bits set for reserved keys */
extern u32 initial_allocation_mask; /* bits set for the initially allocated keys */
extern u32 reserved_allocation_mask; /* bits set for reserved keys */
#define ARCH_VM_PKEY_FLAGS (VM_PKEY_BIT0 | VM_PKEY_BIT1 | VM_PKEY_BIT2 | \
VM_PKEY_BIT3 | VM_PKEY_BIT4)
@ -83,19 +84,21 @@ static inline u16 pte_to_pkey_bits(u64 pteflags)
#define __mm_pkey_is_allocated(mm, pkey) \
(mm_pkey_allocation_map(mm) & pkey_alloc_mask(pkey))
#define __mm_pkey_is_reserved(pkey) (initial_allocation_mask & \
#define __mm_pkey_is_reserved(pkey) (reserved_allocation_mask & \
pkey_alloc_mask(pkey))
static inline bool mm_pkey_is_allocated(struct mm_struct *mm, int pkey)
{
/* A reserved key is never considered as 'explicitly allocated' */
return ((pkey < arch_max_pkey()) &&
!__mm_pkey_is_reserved(pkey) &&
__mm_pkey_is_allocated(mm, pkey));
if (pkey < 0 || pkey >= arch_max_pkey())
return false;
/* Reserved keys are never allocated. */
if (__mm_pkey_is_reserved(pkey))
return false;
return __mm_pkey_is_allocated(mm, pkey);
}
extern void __arch_activate_pkey(int pkey);
extern void __arch_deactivate_pkey(int pkey);
/*
* Returns a positive, 5-bit key on success, or -1 on failure.
* Relies on the mmap_sem to protect against concurrency in mm_pkey_alloc() and
@ -124,11 +127,6 @@ static inline int mm_pkey_alloc(struct mm_struct *mm)
ret = ffz((u32)mm_pkey_allocation_map(mm));
__mm_pkey_allocated(mm, ret);
/*
* Enable the key in the hardware
*/
if (ret > 0)
__arch_activate_pkey(ret);
return ret;
}
@ -140,10 +138,6 @@ static inline int mm_pkey_free(struct mm_struct *mm, int pkey)
if (!mm_pkey_is_allocated(mm, pkey))
return -EINVAL;
/*
* Disable the key in the hardware
*/
__arch_deactivate_pkey(pkey);
__mm_pkey_free(mm, pkey);
return 0;
@ -187,6 +181,16 @@ static inline int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
{
if (static_branch_likely(&pkey_disabled))
return -EINVAL;
/*
* userspace should not change pkey-0 permissions.
* pkey-0 is associated with every page in the kernel.
* If userspace denies any permission on pkey-0, the
* kernel cannot operate.
*/
if (pkey == 0)
return init_val ? -EINVAL : 0;
return __arch_set_user_pkey_access(tsk, pkey, init_val);
}

7
arch/powerpc/include/asm/pnv-pci.h
View File

@ -50,13 +50,6 @@ int pnv_cxl_alloc_hwirq_ranges(struct cxl_irq_ranges *irqs,
struct pci_dev *dev, int num);
void pnv_cxl_release_hwirq_ranges(struct cxl_irq_ranges *irqs,
struct pci_dev *dev);
/* Support for the cxl kernel api on the real PHB (instead of vPHB) */
int pnv_cxl_enable_phb_kernel_api(struct pci_controller *hose, bool enable);
bool pnv_pci_on_cxl_phb(struct pci_dev *dev);
struct cxl_afu *pnv_cxl_phb_to_afu(struct pci_controller *hose);
void pnv_cxl_phb_set_peer_afu(struct pci_dev *dev, struct cxl_afu *afu);
#endif
struct pnv_php_slot {

14
arch/powerpc/include/asm/ppc-opcode.h
View File

@ -12,8 +12,7 @@
#ifndef _ASM_POWERPC_PPC_OPCODE_H
#define _ASM_POWERPC_PPC_OPCODE_H
#include <linux/stringify.h>
#include <asm/asm-compat.h>
#include <asm/asm-const.h>
#define __REG_R0 0
#define __REG_R1 1
@ -367,6 +366,8 @@
#define PPC_INST_STFDX 0x7c0005ae
#define PPC_INST_LVX 0x7c0000ce
#define PPC_INST_STVX 0x7c0001ce
#define PPC_INST_VCMPEQUD 0x100000c7
#define PPC_INST_VCMPEQUB 0x10000006
/* macros to insert fields into opcodes */
#define ___PPC_RA(a) (((a) & 0x1f) << 16)
@ -397,6 +398,7 @@
#define __PPC_BI(s) (((s) & 0x1f) << 16)
#define __PPC_CT(t) (((t) & 0x0f) << 21)
#define __PPC_SPR(r) ((((r) & 0x1f) << 16) | ((((r) >> 5) & 0x1f) << 11))
#define __PPC_RC21 (0x1 << 10)
/*
* Only use the larx hint bit on 64bit CPUs. e500v1/v2 based CPUs will treat a
@ -568,4 +570,12 @@
((IH & 0x7) << 21))
#define PPC_INVALIDATE_ERAT PPC_SLBIA(7)
#define VCMPEQUD_RC(vrt, vra, vrb) stringify_in_c(.long PPC_INST_VCMPEQUD | \
___PPC_RT(vrt) | ___PPC_RA(vra) | \
___PPC_RB(vrb) | __PPC_RC21)
#define VCMPEQUB_RC(vrt, vra, vrb) stringify_in_c(.long PPC_INST_VCMPEQUB | \
___PPC_RT(vrt) | ___PPC_RA(vra) | \
___PPC_RB(vrb) | __PPC_RC21)
#endif /* _ASM_POWERPC_PPC_OPCODE_H */

1
arch/powerpc/include/asm/ppc_asm.h
View File

@ -9,6 +9,7 @@
#include <asm/processor.h>
#include <asm/ppc-opcode.h>
#include <asm/firmware.h>
#include <asm/feature-fixups.h>
#ifdef __ASSEMBLY__

5
arch/powerpc/include/asm/processor.h
View File

@ -39,10 +39,9 @@
#endif /* CONFIG_PPC64 */
#ifndef __ASSEMBLY__
#include <linux/compiler.h>
#include <linux/cache.h>
#include <linux/types.h>
#include <asm/thread_info.h>
#include <asm/ptrace.h>
#include <asm/types.h>
#include <asm/hw_breakpoint.h>
/* We do _not_ want to define new machine types at all, those must die

1
arch/powerpc/include/asm/ptrace.h
View File

@ -24,6 +24,7 @@
#define _ASM_POWERPC_PTRACE_H
#include <uapi/asm/ptrace.h>
#include <asm/asm-const.h>
#ifdef __powerpc64__

2
arch/powerpc/include/asm/reg.h
View File

@ -13,6 +13,8 @@
#include <linux/stringify.h>
#include <asm/cputable.h>
#include <asm/asm-const.h>
#include <asm/feature-fixups.h>
/* Pickup Book E specific registers. */
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)

2
arch/powerpc/include/asm/reg_a2.h
View File

@ -12,6 +12,8 @@
#ifndef __ASM_POWERPC_REG_A2_H__
#define __ASM_POWERPC_REG_A2_H__
#include <asm/asm-const.h>
#define SPRN_TENSR 0x1b5
#define SPRN_TENS 0x1b6 /* Thread ENable Set */
#define SPRN_TENC 0x1b7 /* Thread ENable Clear */

2
arch/powerpc/include/asm/reg_fsl_emb.h
View File

@ -7,6 +7,8 @@
#ifndef __ASM_POWERPC_REG_FSL_EMB_H__
#define __ASM_POWERPC_REG_FSL_EMB_H__
#include <linux/stringify.h>
#ifndef __ASSEMBLY__
/* Performance Monitor Registers */
#define mfpmr(rn) ({unsigned int rval; \

7
arch/powerpc/include/asm/security_features.h
View File

@ -22,6 +22,7 @@ enum stf_barrier_type {
void setup_stf_barrier(void);
void do_stf_barrier_fixups(enum stf_barrier_type types);
void setup_count_cache_flush(void);
static inline void security_ftr_set(unsigned long feature)
{
@ -59,6 +60,9 @@ static inline bool security_ftr_enabled(unsigned long feature)
// Indirect branch prediction cache disabled
#define SEC_FTR_COUNT_CACHE_DISABLED 0x0000000000000020ull
// bcctr 2,0,0 triggers a hardware assisted count cache flush
#define SEC_FTR_BCCTR_FLUSH_ASSIST 0x0000000000000800ull
// Features indicating need for Spectre/Meltdown mitigations
@ -74,6 +78,9 @@ static inline bool security_ftr_enabled(unsigned long feature)
// Firmware configuration indicates user favours security over performance
#define SEC_FTR_FAVOUR_SECURITY 0x0000000000000200ull
// Software required to flush count cache on context switch
#define SEC_FTR_FLUSH_COUNT_CACHE 0x0000000000000400ull
// Features enabled by default
#define SEC_FTR_DEFAULT \

6
arch/powerpc/include/asm/setup.h
View File

@ -52,11 +52,15 @@ enum l1d_flush_type {
void setup_rfi_flush(enum l1d_flush_type, bool enable);
void do_rfi_flush_fixups(enum l1d_flush_type types);
#ifdef CONFIG_PPC_BARRIER_NOSPEC
void setup_barrier_nospec(void);
#else
static inline void setup_barrier_nospec(void) { };
#endif
void do_barrier_nospec_fixups(bool enable);
extern bool barrier_nospec_enabled;
#ifdef CONFIG_PPC_BOOK3S_64
#ifdef CONFIG_PPC_BARRIER_NOSPEC
void do_barrier_nospec_fixups_range(bool enable, void *start, void *end);
#else
static inline void do_barrier_nospec_fixups_range(bool enable, void *start, void *end) { };

1
arch/powerpc/include/asm/smp.h
View File

@ -56,7 +56,6 @@ struct smp_ops_t {
int (*cpu_bootable)(unsigned int nr);
};
extern void smp_flush_nmi_ipi(u64 delay_us);
extern int smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us);
extern int smp_send_safe_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us);
extern void smp_send_debugger_break(void);

13
arch/powerpc/include/asm/sparsemem.h
View File

@ -6,13 +6,20 @@
#ifdef CONFIG_SPARSEMEM
/*
* SECTION_SIZE_BITS 2^N: how big each section will be
* MAX_PHYSADDR_BITS 2^N: how much physical address space we have
* MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space
*/
#define SECTION_SIZE_BITS 24
#define MAX_PHYSADDR_BITS 46
/*
* If we store section details in page->flags we can't increase the MAX_PHYSMEM_BITS
* if we increase SECTIONS_WIDTH we will not store node details in page->flags and
* page_to_nid does a page->section->node lookup
* Hence only increase for VMEMMAP.
*/
#ifdef CONFIG_SPARSEMEM_VMEMMAP
#define MAX_PHYSMEM_BITS 47
#else
#define MAX_PHYSMEM_BITS 46
#endif
#endif /* CONFIG_SPARSEMEM */

2
arch/powerpc/include/asm/spinlock.h
View File

@ -24,9 +24,9 @@
#include <asm/paca.h>
#include <asm/hvcall.h>
#endif
#include <asm/asm-compat.h>
#include <asm/synch.h>
#include <asm/ppc-opcode.h>
#include <asm/asm-405.h>
#ifdef CONFIG_PPC64
/* use 0x800000yy when locked, where yy == CPU number */

13
arch/powerpc/include/asm/stacktrace.h Normal file
View File

@ -0,0 +1,13 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Stack trace functions.
*
* Copyright 2018, Murilo Opsfelder Araujo, IBM Corporation.
*/
#ifndef _ASM_POWERPC_STACKTRACE_H
#define _ASM_POWERPC_STACKTRACE_H
void show_user_instructions(struct pt_regs *regs);
#endif /* _ASM_POWERPC_STACKTRACE_H */

2
arch/powerpc/include/asm/string.h
View File

@ -50,6 +50,8 @@ static inline void *memset64(uint64_t *p, uint64_t v, __kernel_size_t n)
return __memset64(p, v, n * 8);
}
#else
#define __HAVE_ARCH_STRLEN
extern void *memset16(uint16_t *, uint16_t, __kernel_size_t);
#endif
#endif /* __KERNEL__ */

2
arch/powerpc/include/asm/synch.h
View File

@ -3,8 +3,8 @@
#define _ASM_POWERPC_SYNCH_H
#ifdef __KERNEL__
#include <linux/stringify.h>
#include <asm/feature-fixups.h>
#include <asm/asm-const.h>
#ifndef __ASSEMBLY__
extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;

3
arch/powerpc/include/asm/thread_info.h
View File

@ -9,6 +9,8 @@
#ifndef _ASM_POWERPC_THREAD_INFO_H
#define _ASM_POWERPC_THREAD_INFO_H
#include <asm/asm-const.h>
#ifdef __KERNEL__
#define THREAD_SHIFT CONFIG_THREAD_SHIFT
@ -25,7 +27,6 @@
#include <linux/cache.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <linux/stringify.h>
#include <asm/accounting.h>
/*

4
arch/powerpc/include/asm/tlb.h
View File

@ -17,7 +17,6 @@
#include <asm/pgtable.h>
#endif
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#ifndef __powerpc64__
#include <asm/page.h>
#include <asm/mmu.h>
@ -53,7 +52,8 @@ static inline void tlb_remove_check_page_size_change(struct mmu_gather *tlb,
if (!tlb->page_size)
tlb->page_size = page_size;
else if (tlb->page_size != page_size) {
tlb_flush_mmu(tlb);
if (!tlb->fullmm)
tlb_flush_mmu(tlb);
/*
* update the page size after flush for the new
* mmu_gather.

86
arch/powerpc/include/asm/tlbflush.h
View File

@ -1,87 +1,11 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_POWERPC_TLBFLUSH_H
#define _ASM_POWERPC_TLBFLUSH_H
/*
* TLB flushing:
*
* - flush_tlb_mm(mm) flushes the specified mm context TLB's
* - flush_tlb_page(vma, vmaddr) flushes one page
* - local_flush_tlb_mm(mm, full) flushes the specified mm context on
* the local processor
* - local_flush_tlb_page(vma, vmaddr) flushes one page on the local processor
* - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB
* - flush_tlb_range(vma, start, end) flushes a range of pages
* - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifdef __KERNEL__
#ifdef CONFIG_PPC_MMU_NOHASH
/*
* TLB flushing for software loaded TLB chips
*
* TODO: (CONFIG_FSL_BOOKE) determine if flush_tlb_range &
* flush_tlb_kernel_range are best implemented as tlbia vs
* specific tlbie's
*/
struct vm_area_struct;
struct mm_struct;
#define MMU_NO_CONTEXT ((unsigned int)-1)
extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
extern void local_flush_tlb_mm(struct mm_struct *mm);
extern void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
extern void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
int tsize, int ind);
#ifdef CONFIG_SMP
extern void flush_tlb_mm(struct mm_struct *mm);
extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
extern void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
int tsize, int ind);
#ifdef CONFIG_PPC_BOOK3S
#include <asm/book3s/tlbflush.h>
#else
#define flush_tlb_mm(mm) local_flush_tlb_mm(mm)
#define flush_tlb_page(vma,addr) local_flush_tlb_page(vma,addr)
#define __flush_tlb_page(mm,addr,p,i) __local_flush_tlb_page(mm,addr,p,i)
#endif
#include <asm/nohash/tlbflush.h>
#endif /* !CONFIG_PPC_BOOK3S */
#elif defined(CONFIG_PPC_STD_MMU_32)
#define MMU_NO_CONTEXT (0)
/*
* TLB flushing for "classic" hash-MMU 32-bit CPUs, 6xx, 7xx, 7xxx
*/
extern void flush_tlb_mm(struct mm_struct *mm);
extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr);
extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
static inline void local_flush_tlb_page(struct vm_area_struct *vma,
unsigned long vmaddr)
{
flush_tlb_page(vma, vmaddr);
}
static inline void local_flush_tlb_mm(struct mm_struct *mm)
{
flush_tlb_mm(mm);
}
#elif defined(CONFIG_PPC_BOOK3S_64)
#include <asm/book3s/64/tlbflush.h>
#else
#error Unsupported MMU type
#endif
#endif /*__KERNEL__ */
#endif /* _ASM_POWERPC_TLBFLUSH_H */

14
arch/powerpc/include/asm/uaccess.h
View File

@ -2,7 +2,6 @@
#ifndef _ARCH_POWERPC_UACCESS_H
#define _ARCH_POWERPC_UACCESS_H
#include <asm/asm-compat.h>
#include <asm/ppc_asm.h>
#include <asm/processor.h>
#include <asm/page.h>
@ -250,10 +249,17 @@ do { \
} \
} while (0)
/*
* This is a type: either unsigned long, if the argument fits into
* that type, or otherwise unsigned long long.
*/
#define __long_type(x) \
__typeof__(__builtin_choose_expr(sizeof(x) > sizeof(0UL), 0ULL, 0UL))
#define __get_user_nocheck(x, ptr, size) \
({ \
long __gu_err; \
unsigned long __gu_val; \
__long_type(*(ptr)) __gu_val; \
const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
__chk_user_ptr(ptr); \
if (!is_kernel_addr((unsigned long)__gu_addr)) \
@ -267,7 +273,7 @@ do { \
#define __get_user_check(x, ptr, size) \
({ \
long __gu_err = -EFAULT; \
unsigned long __gu_val = 0; \
__long_type(*(ptr)) __gu_val = 0; \
const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
might_fault(); \
if (access_ok(VERIFY_READ, __gu_addr, (size))) { \
@ -281,7 +287,7 @@ do { \
#define __get_user_nosleep(x, ptr, size) \
({ \
long __gu_err; \
unsigned long __gu_val; \
__long_type(*(ptr)) __gu_val; \
const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
__chk_user_ptr(ptr); \
barrier_nospec(); \

1
arch/powerpc/include/asm/xive.h
View File

@ -87,7 +87,6 @@ extern int xive_smp_prepare_cpu(unsigned int cpu);
extern void xive_smp_setup_cpu(void);
extern void xive_smp_disable_cpu(void);
extern void xive_teardown_cpu(void);
extern void xive_kexec_teardown_cpu(int secondary);
extern void xive_shutdown(void);
extern void xive_flush_interrupt(void);

17
arch/powerpc/kernel/Makefile
View File

@ -7,10 +7,10 @@ CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"'
subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
ifeq ($(CONFIG_PPC64),y)
ifdef CONFIG_PPC64
CFLAGS_prom_init.o += $(NO_MINIMAL_TOC)
endif
ifeq ($(CONFIG_PPC32),y)
ifdef CONFIG_PPC32
CFLAGS_prom_init.o += -fPIC
CFLAGS_btext.o += -fPIC
endif
@ -42,9 +42,10 @@ obj-$(CONFIG_VDSO32) += vdso32/
obj-$(CONFIG_PPC_WATCHDOG) += watchdog.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o security.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o
obj-$(CONFIG_PPC_BOOK3S_64) += mce.o mce_power.o
obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o
obj-$(CONFIG_PPC_BARRIER_NOSPEC) += security.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
@ -62,13 +63,13 @@ obj-$(CONFIG_EEH) += eeh.o eeh_pe.o eeh_dev.o eeh_cache.o \
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_FA_DUMP) += fadump.o
ifeq ($(CONFIG_PPC32),y)
ifdef CONFIG_PPC32
obj-$(CONFIG_E500) += idle_e500.o
endif
obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
obj-$(CONFIG_TAU) += tau_6xx.o
obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o
ifeq ($(CONFIG_FSL_BOOKE),y)
ifdef CONFIG_FSL_BOOKE
obj-$(CONFIG_HIBERNATION) += swsusp_booke.o
else
obj-$(CONFIG_HIBERNATION) += swsusp_$(BITS).o
@ -109,9 +110,11 @@ obj-$(CONFIG_PCI_MSI) += msi.o
obj-$(CONFIG_KEXEC_CORE) += machine_kexec.o crash.o \
machine_kexec_$(BITS).o
obj-$(CONFIG_KEXEC_FILE) += machine_kexec_file_$(BITS).o kexec_elf_$(BITS).o
ifeq ($(CONFIG_HAVE_IMA_KEXEC)$(CONFIG_IMA),yy)
ifdef CONFIG_HAVE_IMA_KEXEC
ifdef CONFIG_IMA
obj-y += ima_kexec.o
endif
endif
obj-$(CONFIG_AUDIT) += audit.o
obj64-$(CONFIG_AUDIT) += compat_audit.o
@ -164,7 +167,7 @@ PHONY += systbl_chk
systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
$(call cmd,systbl_chk)
ifeq ($(CONFIG_PPC_OF_BOOT_TRAMPOLINE),y)
ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
$(obj)/built-in.a: prom_init_check
quiet_cmd_prom_init_check = CALL $<

Some files were not shown because too many files have changed in this diff Show More