drm/i915: reindent Haswell register definitions
It's the only part of the i915_reg.h file that looks totally wrongly indented, so I assume my editor config is the correct one. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This commit is contained in:
Paulo Zanoni
Daniel Vetter
parent
602c43d34d
commit
5e49cea643
@ -4278,198 +4278,184 @@
|
||||
#define AUD_CONFIG_DISABLE_NCTS (1 << 3)
|
||||
|
||||
/* HSW Power Wells */
|
||||
#define HSW_PWR_WELL_CTL1 0x45400 /* BIOS */
|
||||
#define HSW_PWR_WELL_CTL2 0x45404 /* Driver */
|
||||
#define HSW_PWR_WELL_CTL3 0x45408 /* KVMR */
|
||||
#define HSW_PWR_WELL_CTL4 0x4540C /* Debug */
|
||||
#define HSW_PWR_WELL_ENABLE (1<<31)
|
||||
#define HSW_PWR_WELL_STATE (1<<30)
|
||||
#define HSW_PWR_WELL_CTL5 0x45410
|
||||
#define HSW_PWR_WELL_CTL1 0x45400 /* BIOS */
|
||||
#define HSW_PWR_WELL_CTL2 0x45404 /* Driver */
|
||||
#define HSW_PWR_WELL_CTL3 0x45408 /* KVMR */
|
||||
#define HSW_PWR_WELL_CTL4 0x4540C /* Debug */
|
||||
#define HSW_PWR_WELL_ENABLE (1<<31)
|
||||
#define HSW_PWR_WELL_STATE (1<<30)
|
||||
#define HSW_PWR_WELL_CTL5 0x45410
|
||||
#define HSW_PWR_WELL_ENABLE_SINGLE_STEP (1<<31)
|
||||
#define HSW_PWR_WELL_PWR_GATE_OVERRIDE (1<<20)
|
||||
#define HSW_PWR_WELL_FORCE_ON (1<<19)
|
||||
#define HSW_PWR_WELL_CTL6 0x45414
|
||||
#define HSW_PWR_WELL_FORCE_ON (1<<19)
|
||||
#define HSW_PWR_WELL_CTL6 0x45414
|
||||
|
||||
/* Per-pipe DDI Function Control */
|
||||
#define PIPE_DDI_FUNC_CTL_A 0x60400
|
||||
#define PIPE_DDI_FUNC_CTL_B 0x61400
|
||||
#define PIPE_DDI_FUNC_CTL_C 0x62400
|
||||
#define PIPE_DDI_FUNC_CTL_A 0x60400
|
||||
#define PIPE_DDI_FUNC_CTL_B 0x61400
|
||||
#define PIPE_DDI_FUNC_CTL_C 0x62400
|
||||
#define PIPE_DDI_FUNC_CTL_EDP 0x6F400
|
||||
#define DDI_FUNC_CTL(pipe) _PIPE(pipe, \
|
||||
PIPE_DDI_FUNC_CTL_A, \
|
||||
PIPE_DDI_FUNC_CTL_B)
|
||||
#define DDI_FUNC_CTL(pipe) _PIPE(pipe, PIPE_DDI_FUNC_CTL_A, \
|
||||
PIPE_DDI_FUNC_CTL_B)
|
||||
#define PIPE_DDI_FUNC_ENABLE (1<<31)
|
||||
/* Those bits are ignored by pipe EDP since it can only connect to DDI A */
|
||||
#define PIPE_DDI_PORT_MASK (7<<28)
|
||||
#define PIPE_DDI_SELECT_PORT(x) ((x)<<28)
|
||||
#define PIPE_DDI_MODE_SELECT_MASK (7<<24)
|
||||
#define PIPE_DDI_MODE_SELECT_HDMI (0<<24)
|
||||
#define PIPE_DDI_MODE_SELECT_DVI (1<<24)
|
||||
#define PIPE_DDI_PORT_MASK (7<<28)
|
||||
#define PIPE_DDI_SELECT_PORT(x) ((x)<<28)
|
||||
#define PIPE_DDI_MODE_SELECT_MASK (7<<24)
|
||||
#define PIPE_DDI_MODE_SELECT_HDMI (0<<24)
|
||||
#define PIPE_DDI_MODE_SELECT_DVI (1<<24)
|
||||
#define PIPE_DDI_MODE_SELECT_DP_SST (2<<24)
|
||||
#define PIPE_DDI_MODE_SELECT_DP_MST (3<<24)
|
||||
#define PIPE_DDI_MODE_SELECT_FDI (4<<24)
|
||||
#define PIPE_DDI_BPC_MASK (7<<20)
|
||||
#define PIPE_DDI_BPC_8 (0<<20)
|
||||
#define PIPE_DDI_BPC_10 (1<<20)
|
||||
#define PIPE_DDI_BPC_6 (2<<20)
|
||||
#define PIPE_DDI_BPC_12 (3<<20)
|
||||
#define PIPE_DDI_PVSYNC (1<<17)
|
||||
#define PIPE_DDI_PHSYNC (1<<16)
|
||||
#define PIPE_DDI_BFI_ENABLE (1<<4)
|
||||
#define PIPE_DDI_PORT_WIDTH_X1 (0<<1)
|
||||
#define PIPE_DDI_PORT_WIDTH_X2 (1<<1)
|
||||
#define PIPE_DDI_PORT_WIDTH_X4 (3<<1)
|
||||
#define PIPE_DDI_MODE_SELECT_FDI (4<<24)
|
||||
#define PIPE_DDI_BPC_MASK (7<<20)
|
||||
#define PIPE_DDI_BPC_8 (0<<20)
|
||||
#define PIPE_DDI_BPC_10 (1<<20)
|
||||
#define PIPE_DDI_BPC_6 (2<<20)
|
||||
#define PIPE_DDI_BPC_12 (3<<20)
|
||||
#define PIPE_DDI_PVSYNC (1<<17)
|
||||
#define PIPE_DDI_PHSYNC (1<<16)
|
||||
#define PIPE_DDI_BFI_ENABLE (1<<4)
|
||||
#define PIPE_DDI_PORT_WIDTH_X1 (0<<1)
|
||||
#define PIPE_DDI_PORT_WIDTH_X2 (1<<1)
|
||||
#define PIPE_DDI_PORT_WIDTH_X4 (3<<1)
|
||||
|
||||
/* DisplayPort Transport Control */
|
||||
#define DP_TP_CTL_A 0x64040
|
||||
#define DP_TP_CTL_B 0x64140
|
||||
#define DP_TP_CTL(port) _PORT(port, \
|
||||
DP_TP_CTL_A, \
|
||||
DP_TP_CTL_B)
|
||||
#define DP_TP_CTL_ENABLE (1<<31)
|
||||
#define DP_TP_CTL_MODE_SST (0<<27)
|
||||
#define DP_TP_CTL_MODE_MST (1<<27)
|
||||
#define DP_TP_CTL(port) _PORT(port, DP_TP_CTL_A, DP_TP_CTL_B)
|
||||
#define DP_TP_CTL_ENABLE (1<<31)
|
||||
#define DP_TP_CTL_MODE_SST (0<<27)
|
||||
#define DP_TP_CTL_MODE_MST (1<<27)
|
||||
#define DP_TP_CTL_ENHANCED_FRAME_ENABLE (1<<18)
|
||||
#define DP_TP_CTL_FDI_AUTOTRAIN (1<<15)
|
||||
#define DP_TP_CTL_FDI_AUTOTRAIN (1<<15)
|
||||
#define DP_TP_CTL_LINK_TRAIN_MASK (7<<8)
|
||||
#define DP_TP_CTL_LINK_TRAIN_PAT1 (0<<8)
|
||||
#define DP_TP_CTL_LINK_TRAIN_PAT2 (1<<8)
|
||||
#define DP_TP_CTL_LINK_TRAIN_NORMAL (3<<8)
|
||||
#define DP_TP_CTL_LINK_TRAIN_NORMAL (3<<8)
|
||||
|
||||
/* DisplayPort Transport Status */
|
||||
#define DP_TP_STATUS_A 0x64044
|
||||
#define DP_TP_STATUS_B 0x64144
|
||||
#define DP_TP_STATUS(port) _PORT(port, \
|
||||
DP_TP_STATUS_A, \
|
||||
DP_TP_STATUS_B)
|
||||
#define DP_TP_STATUS(port) _PORT(port, DP_TP_STATUS_A, DP_TP_STATUS_B)
|
||||
#define DP_TP_STATUS_AUTOTRAIN_DONE (1<<12)
|
||||
|
||||
/* DDI Buffer Control */
|
||||
#define DDI_BUF_CTL_A 0x64000
|
||||
#define DDI_BUF_CTL_B 0x64100
|
||||
#define DDI_BUF_CTL(port) _PORT(port, \
|
||||
DDI_BUF_CTL_A, \
|
||||
DDI_BUF_CTL_B)
|
||||
#define DDI_BUF_CTL_ENABLE (1<<31)
|
||||
#define DDI_BUF_CTL(port) _PORT(port, DDI_BUF_CTL_A, DDI_BUF_CTL_B)
|
||||
#define DDI_BUF_CTL_ENABLE (1<<31)
|
||||
#define DDI_BUF_EMP_400MV_0DB_HSW (0<<24) /* Sel0 */
|
||||
#define DDI_BUF_EMP_400MV_3_5DB_HSW (1<<24) /* Sel1 */
|
||||
#define DDI_BUF_EMP_400MV_3_5DB_HSW (1<<24) /* Sel1 */
|
||||
#define DDI_BUF_EMP_400MV_6DB_HSW (2<<24) /* Sel2 */
|
||||
#define DDI_BUF_EMP_400MV_9_5DB_HSW (3<<24) /* Sel3 */
|
||||
#define DDI_BUF_EMP_400MV_9_5DB_HSW (3<<24) /* Sel3 */
|
||||
#define DDI_BUF_EMP_600MV_0DB_HSW (4<<24) /* Sel4 */
|
||||
#define DDI_BUF_EMP_600MV_3_5DB_HSW (5<<24) /* Sel5 */
|
||||
#define DDI_BUF_EMP_600MV_3_5DB_HSW (5<<24) /* Sel5 */
|
||||
#define DDI_BUF_EMP_600MV_6DB_HSW (6<<24) /* Sel6 */
|
||||
#define DDI_BUF_EMP_800MV_0DB_HSW (7<<24) /* Sel7 */
|
||||
#define DDI_BUF_EMP_800MV_3_5DB_HSW (8<<24) /* Sel8 */
|
||||
#define DDI_BUF_EMP_MASK (0xf<<24)
|
||||
#define DDI_BUF_IS_IDLE (1<<7)
|
||||
#define DDI_PORT_WIDTH_X1 (0<<1)
|
||||
#define DDI_PORT_WIDTH_X2 (1<<1)
|
||||
#define DDI_PORT_WIDTH_X4 (3<<1)
|
||||
#define DDI_BUF_EMP_800MV_3_5DB_HSW (8<<24) /* Sel8 */
|
||||
#define DDI_BUF_EMP_MASK (0xf<<24)
|
||||
#define DDI_BUF_IS_IDLE (1<<7)
|
||||
#define DDI_PORT_WIDTH_X1 (0<<1)
|
||||
#define DDI_PORT_WIDTH_X2 (1<<1)
|
||||
#define DDI_PORT_WIDTH_X4 (3<<1)
|
||||
#define DDI_INIT_DISPLAY_DETECTED (1<<0)
|
||||
|
||||
/* DDI Buffer Translations */
|
||||
#define DDI_BUF_TRANS_A 0x64E00
|
||||
#define DDI_BUF_TRANS_B 0x64E60
|
||||
#define DDI_BUF_TRANS(port) _PORT(port, \
|
||||
DDI_BUF_TRANS_A, \
|
||||
DDI_BUF_TRANS_B)
|
||||
#define DDI_BUF_TRANS(port) _PORT(port, DDI_BUF_TRANS_A, DDI_BUF_TRANS_B)
|
||||
|
||||
/* Sideband Interface (SBI) is programmed indirectly, via
|
||||
* SBI_ADDR, which contains the register offset; and SBI_DATA,
|
||||
* which contains the payload */
|
||||
#define SBI_ADDR 0xC6000
|
||||
#define SBI_DATA 0xC6004
|
||||
#define SBI_ADDR 0xC6000
|
||||
#define SBI_DATA 0xC6004
|
||||
#define SBI_CTL_STAT 0xC6008
|
||||
#define SBI_CTL_OP_CRRD (0x6<<8)
|
||||
#define SBI_CTL_OP_CRWR (0x7<<8)
|
||||
#define SBI_RESPONSE_FAIL (0x1<<1)
|
||||
#define SBI_RESPONSE_SUCCESS (0x0<<1)
|
||||
#define SBI_BUSY (0x1<<0)
|
||||
#define SBI_READY (0x0<<0)
|
||||
#define SBI_RESPONSE_SUCCESS (0x0<<1)
|
||||
#define SBI_BUSY (0x1<<0)
|
||||
#define SBI_READY (0x0<<0)
|
||||
|
||||
/* SBI offsets */
|
||||
#define SBI_SSCDIVINTPHASE6 0x0600
|
||||
#define SBI_SSCDIVINTPHASE6 0x0600
|
||||
#define SBI_SSCDIVINTPHASE_DIVSEL_MASK ((0x7f)<<1)
|
||||
#define SBI_SSCDIVINTPHASE_DIVSEL(x) ((x)<<1)
|
||||
#define SBI_SSCDIVINTPHASE_INCVAL_MASK ((0x7f)<<8)
|
||||
#define SBI_SSCDIVINTPHASE_INCVAL(x) ((x)<<8)
|
||||
#define SBI_SSCDIVINTPHASE_DIR(x) ((x)<<15)
|
||||
#define SBI_SSCDIVINTPHASE_DIR(x) ((x)<<15)
|
||||
#define SBI_SSCDIVINTPHASE_PROPAGATE (1<<0)
|
||||
#define SBI_SSCCTL 0x020c
|
||||
#define SBI_SSCCTL 0x020c
|
||||
#define SBI_SSCCTL6 0x060C
|
||||
#define SBI_SSCCTL_DISABLE (1<<0)
|
||||
#define SBI_SSCCTL_DISABLE (1<<0)
|
||||
#define SBI_SSCAUXDIV6 0x0610
|
||||
#define SBI_SSCAUXDIV_FINALDIV2SEL(x) ((x)<<4)
|
||||
#define SBI_DBUFF0 0x2a00
|
||||
#define SBI_DBUFF0 0x2a00
|
||||
|
||||
/* LPT PIXCLK_GATE */
|
||||
#define PIXCLK_GATE 0xC6020
|
||||
#define PIXCLK_GATE 0xC6020
|
||||
#define PIXCLK_GATE_UNGATE 1<<0
|
||||
#define PIXCLK_GATE_GATE 0<<0
|
||||
|
||||
/* SPLL */
|
||||
#define SPLL_CTL 0x46020
|
||||
#define SPLL_CTL 0x46020
|
||||
#define SPLL_PLL_ENABLE (1<<31)
|
||||
#define SPLL_PLL_SCC (1<<28)
|
||||
#define SPLL_PLL_NON_SCC (2<<28)
|
||||
#define SPLL_PLL_FREQ_810MHz (0<<26)
|
||||
#define SPLL_PLL_FREQ_1350MHz (1<<26)
|
||||
#define SPLL_PLL_FREQ_810MHz (0<<26)
|
||||
#define SPLL_PLL_FREQ_1350MHz (1<<26)
|
||||
|
||||
/* WRPLL */
|
||||
#define WRPLL_CTL1 0x46040
|
||||
#define WRPLL_CTL2 0x46060
|
||||
#define WRPLL_PLL_ENABLE (1<<31)
|
||||
#define WRPLL_PLL_SELECT_SSC (0x01<<28)
|
||||
#define WRPLL_PLL_SELECT_NON_SCC (0x02<<28)
|
||||
#define WRPLL_CTL1 0x46040
|
||||
#define WRPLL_CTL2 0x46060
|
||||
#define WRPLL_PLL_ENABLE (1<<31)
|
||||
#define WRPLL_PLL_SELECT_SSC (0x01<<28)
|
||||
#define WRPLL_PLL_SELECT_NON_SCC (0x02<<28)
|
||||
#define WRPLL_PLL_SELECT_LCPLL_2700 (0x03<<28)
|
||||
/* WRPLL divider programming */
|
||||
#define WRPLL_DIVIDER_REFERENCE(x) ((x)<<0)
|
||||
#define WRPLL_DIVIDER_POST(x) ((x)<<8)
|
||||
#define WRPLL_DIVIDER_FEEDBACK(x) ((x)<<16)
|
||||
#define WRPLL_DIVIDER_REFERENCE(x) ((x)<<0)
|
||||
#define WRPLL_DIVIDER_POST(x) ((x)<<8)
|
||||
#define WRPLL_DIVIDER_FEEDBACK(x) ((x)<<16)
|
||||
|
||||
/* Port clock selection */
|
||||
#define PORT_CLK_SEL_A 0x46100
|
||||
#define PORT_CLK_SEL_B 0x46104
|
||||
#define PORT_CLK_SEL(port) _PORT(port, \
|
||||
PORT_CLK_SEL_A, \
|
||||
PORT_CLK_SEL_B)
|
||||
#define PORT_CLK_SEL(port) _PORT(port, PORT_CLK_SEL_A, PORT_CLK_SEL_B)
|
||||
#define PORT_CLK_SEL_LCPLL_2700 (0<<29)
|
||||
#define PORT_CLK_SEL_LCPLL_1350 (1<<29)
|
||||
#define PORT_CLK_SEL_LCPLL_810 (2<<29)
|
||||
#define PORT_CLK_SEL_SPLL (3<<29)
|
||||
#define PORT_CLK_SEL_SPLL (3<<29)
|
||||
#define PORT_CLK_SEL_WRPLL1 (4<<29)
|
||||
#define PORT_CLK_SEL_WRPLL2 (5<<29)
|
||||
|
||||
/* Pipe clock selection */
|
||||
#define PIPE_CLK_SEL_A 0x46140
|
||||
#define PIPE_CLK_SEL_B 0x46144
|
||||
#define PIPE_CLK_SEL(pipe) _PIPE(pipe, \
|
||||
PIPE_CLK_SEL_A, \
|
||||
PIPE_CLK_SEL_B)
|
||||
#define PIPE_CLK_SEL(pipe) _PIPE(pipe, PIPE_CLK_SEL_A, PIPE_CLK_SEL_B)
|
||||
/* For each pipe, we need to select the corresponding port clock */
|
||||
#define PIPE_CLK_SEL_DISABLED (0x0<<29)
|
||||
#define PIPE_CLK_SEL_PORT(x) ((x+1)<<29)
|
||||
#define PIPE_CLK_SEL_DISABLED (0x0<<29)
|
||||
#define PIPE_CLK_SEL_PORT(x) ((x+1)<<29)
|
||||
|
||||
/* LCPLL Control */
|
||||
#define LCPLL_CTL 0x130040
|
||||
#define LCPLL_CTL 0x130040
|
||||
#define LCPLL_PLL_DISABLE (1<<31)
|
||||
#define LCPLL_PLL_LOCK (1<<30)
|
||||
#define LCPLL_CD_CLOCK_DISABLE (1<<25)
|
||||
#define LCPLL_CD_CLOCK_DISABLE (1<<25)
|
||||
#define LCPLL_CD2X_CLOCK_DISABLE (1<<23)
|
||||
|
||||
/* Pipe WM_LINETIME - watermark line time */
|
||||
#define PIPE_WM_LINETIME_A 0x45270
|
||||
#define PIPE_WM_LINETIME_B 0x45274
|
||||
#define PIPE_WM_LINETIME(pipe) _PIPE(pipe, \
|
||||
PIPE_WM_LINETIME_A, \
|
||||
PIPE_WM_LINETIME_B)
|
||||
#define PIPE_WM_LINETIME_MASK (0x1ff)
|
||||
#define PIPE_WM_LINETIME_TIME(x) ((x))
|
||||
#define PIPE_WM_LINETIME(pipe) _PIPE(pipe, PIPE_WM_LINETIME_A, \
|
||||
PIPE_WM_LINETIME_B)
|
||||
#define PIPE_WM_LINETIME_MASK (0x1ff)
|
||||
#define PIPE_WM_LINETIME_TIME(x) ((x))
|
||||
#define PIPE_WM_LINETIME_IPS_LINETIME_MASK (0x1ff<<16)
|
||||
#define PIPE_WM_LINETIME_IPS_LINETIME(x) ((x)<<16)
|
||||
#define PIPE_WM_LINETIME_IPS_LINETIME(x) ((x)<<16)
|
||||
|
||||
/* SFUSE_STRAP */
|
||||
#define SFUSE_STRAP 0xc2014
|
||||
#define SFUSE_STRAP 0xc2014
|
||||
#define SFUSE_STRAP_DDIB_DETECTED (1<<2)
|
||||
#define SFUSE_STRAP_DDIC_DETECTED (1<<1)
|
||||
#define SFUSE_STRAP_DDID_DETECTED (1<<0)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user