iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

[PATCH] Add rtl8187 wireless driver

Browse Source 
This patch adds a mac80211 based wireless driver for the rtl8187 USB
wireless card.

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Michael Wu 2007-05-14 01:41:02 -04:00 committed by Jeff Garzik
parent 4b914dc049
commit 605bebe23b
8 changed files with 1873 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
MAINTAINERS
View File

@ -3049,6 +3049,16 @@ S: Maintained
RISCOM8 DRIVER
S: Orphan
RTL818X WIRELESS DRIVER
P: Michael Wu
M: flamingice@sourmilk.net
P: Andrea Merello
M: andreamrl@tiscali.it
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
T: git kernel.org:/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
S: Maintained
S3 SAVAGE FRAMEBUFFER DRIVER
P: Antonino Daplas
M: adaplas@gmail.com

12
drivers/net/wireless/Kconfig
View File

@ -546,6 +546,18 @@ config USB_ZD1201
To compile this driver as a module, choose M here: the
module will be called zd1201.
config RTL8187
tristate "Realtek 8187 USB support"
depends on MAC80211 && USB && WLAN_80211 && EXPERIMENTAL
select EEPROM_93CX6
---help---
This is a driver for RTL8187 based cards.
These are USB based chips found in cards such as:
Netgear WG111v2
Thanks to Realtek for their support!
source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/bcm43xx/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"

3
drivers/net/wireless/Makefile
View File

@ -44,3 +44,6 @@ obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o
obj-$(CONFIG_USB_ZD1201) += zd1201.o
obj-$(CONFIG_LIBERTAS_USB) += libertas/
rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o
obj-$(CONFIG_RTL8187) += rtl8187.o

131
drivers/net/wireless/rtl8187.h Normal file
View File

@ -0,0 +1,131 @@
#ifndef RTL8187_H
#define RTL8187_H
#include "rtl818x.h"
#define RTL8187_EEPROM_TXPWR_BASE 0x05
#define RTL8187_EEPROM_MAC_ADDR 0x07
#define RTL8187_EEPROM_TXPWR_CHAN_1 0x16 /* 3 channels */
#define RTL8187_EEPROM_TXPWR_CHAN_6 0x1B /* 2 channels */
#define RTL8187_EEPROM_TXPWR_CHAN_4 0x3D /* 2 channels */
#define RTL8187_REQT_READ 0xC0
#define RTL8187_REQT_WRITE 0x40
#define RTL8187_REQ_GET_REG 0x05
#define RTL8187_REQ_SET_REG 0x05
#define RTL8187_MAX_RX 0x9C4
struct rtl8187_rx_info {
struct urb *urb;
struct ieee80211_hw *dev;
};
struct rtl8187_rx_hdr {
__le16 len;
__le16 rate;
u8 noise;
u8 signal;
u8 agc;
u8 reserved;
__le64 mac_time;
} __attribute__((packed));
struct rtl8187_tx_info {
struct ieee80211_tx_control *control;
struct urb *urb;
struct ieee80211_hw *dev;
};
struct rtl8187_tx_hdr {
__le32 flags;
#define RTL8187_TX_FLAG_NO_ENCRYPT (1 << 15)
#define RTL8187_TX_FLAG_MORE_FRAG (1 << 17)
#define RTL8187_TX_FLAG_CTS (1 << 18)
#define RTL8187_TX_FLAG_RTS (1 << 23)
__le16 rts_duration;
__le16 len;
__le32 retry;
} __attribute__((packed));
struct rtl8187_priv {
/* common between rtl818x drivers */
struct rtl818x_csr *map;
void (*rf_init)(struct ieee80211_hw *);
int mode;
/* rtl8187 specific */
struct ieee80211_channel channels[14];
struct ieee80211_rate rates[12];
struct ieee80211_hw_mode modes[2];
struct usb_device *udev;
u8 *hwaddr;
u16 txpwr_base;
u8 asic_rev;
struct sk_buff_head rx_queue;
};
void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
static inline u8 rtl818x_ioread8(struct rtl8187_priv *priv, u8 *addr)
{
u8 val;
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
(unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
return val;
}
static inline u16 rtl818x_ioread16(struct rtl8187_priv *priv, __le16 *addr)
{
__le16 val;
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
(unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
return le16_to_cpu(val);
}
static inline u32 rtl818x_ioread32(struct rtl8187_priv *priv, __le32 *addr)
{
__le32 val;
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
(unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
return le32_to_cpu(val);
}
static inline void rtl818x_iowrite8(struct rtl8187_priv *priv,
u8 *addr, u8 val)
{
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
(unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
}
static inline void rtl818x_iowrite16(struct rtl8187_priv *priv,
__le16 *addr, u16 val)
{
__le16 buf = cpu_to_le16(val);
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
(unsigned long)addr, 0, &buf, sizeof(buf), HZ / 2);
}
static inline void rtl818x_iowrite32(struct rtl8187_priv *priv,
__le32 *addr, u32 val)
{
__le32 buf = cpu_to_le32(val);
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
(unsigned long)addr, 0, &buf, sizeof(buf), HZ / 2);
}
#endif /* RTL8187_H */

731
drivers/net/wireless/rtl8187_dev.c Normal file
View File

@ -0,0 +1,731 @@
/*
* Linux device driver for RTL8187
*
* Copyright 2007 Michael Wu <flamingice@sourmilk.net>
* Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
*
* Based on the r8187 driver, which is:
* Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
*
* Thanks to Realtek for their support!
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/usb.h>
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/eeprom_93cx6.h>
#include <net/mac80211.h>
#include "rtl8187.h"
#include "rtl8187_rtl8225.h"
MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
MODULE_DESCRIPTION("RTL8187 USB wireless driver");
MODULE_LICENSE("GPL");
static struct usb_device_id rtl8187_table[] __devinitdata = {
/* Realtek */
{USB_DEVICE(0x0bda, 0x8187)},
/* Netgear */
{USB_DEVICE(0x0846, 0x6100)},
{USB_DEVICE(0x0846, 0x6a00)},
{}
};
MODULE_DEVICE_TABLE(usb, rtl8187_table);
void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
{
struct rtl8187_priv *priv = dev->priv;
data <<= 8;
data |= addr | 0x80;
rtl818x_iowrite8(priv, &priv->map->PHY[3], (data >> 24) & 0xFF);
rtl818x_iowrite8(priv, &priv->map->PHY[2], (data >> 16) & 0xFF);
rtl818x_iowrite8(priv, &priv->map->PHY[1], (data >> 8) & 0xFF);
rtl818x_iowrite8(priv, &priv->map->PHY[0], data & 0xFF);
msleep(1);
}
static void rtl8187_tx_cb(struct urb *urb)
{
struct ieee80211_tx_status status = { {0} };
struct sk_buff *skb = (struct sk_buff *)urb->context;
struct rtl8187_tx_info *info = (struct rtl8187_tx_info *)skb->cb;
usb_free_urb(info->urb);
if (info->control)
memcpy(&status.control, info->control, sizeof(status.control));
kfree(info->control);
skb_pull(skb, sizeof(struct rtl8187_tx_hdr));
status.flags |= IEEE80211_TX_STATUS_ACK;
ieee80211_tx_status_irqsafe(info->dev, skb, &status);
}
static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
struct rtl8187_priv *priv = dev->priv;
struct rtl8187_tx_hdr *hdr;
struct rtl8187_tx_info *info;
struct urb *urb;
u32 tmp;
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
kfree_skb(skb);
return 0;
}
hdr = (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
tmp = skb->len - sizeof(*hdr);
tmp |= RTL8187_TX_FLAG_NO_ENCRYPT;
tmp |= control->rts_cts_rate << 19;
tmp |= control->tx_rate << 24;
if (ieee80211_get_morefrag((struct ieee80211_hdr *)skb))
tmp |= RTL8187_TX_FLAG_MORE_FRAG;
if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) {
tmp |= RTL8187_TX_FLAG_RTS;
hdr->rts_duration =
ieee80211_rts_duration(dev, skb->len, control);
}
if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
tmp |= RTL8187_TX_FLAG_CTS;
hdr->flags = cpu_to_le32(tmp);
hdr->len = 0;
tmp = control->retry_limit << 8;
hdr->retry = cpu_to_le32(tmp);
info = (struct rtl8187_tx_info *)skb->cb;
info->control = kmemdup(control, sizeof(*control), GFP_ATOMIC);
info->urb = urb;
info->dev = dev;
usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, 2),
hdr, skb->len, rtl8187_tx_cb, skb);
usb_submit_urb(urb, GFP_ATOMIC);
return 0;
}
static void rtl8187_rx_cb(struct urb *urb)
{
struct sk_buff *skb = (struct sk_buff *)urb->context;
struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb;
struct ieee80211_hw *dev = info->dev;
struct rtl8187_priv *priv = dev->priv;
struct rtl8187_rx_hdr *hdr;
struct ieee80211_rx_status rx_status = { 0 };
int rate, signal;
spin_lock(&priv->rx_queue.lock);
if (skb->next)
__skb_unlink(skb, &priv->rx_queue);
else {
spin_unlock(&priv->rx_queue.lock);
return;
}
spin_unlock(&priv->rx_queue.lock);
if (unlikely(urb->status)) {
usb_free_urb(urb);
dev_kfree_skb_irq(skb);
return;
}
skb_put(skb, urb->actual_length);
hdr = (struct rtl8187_rx_hdr *)(skb_tail_pointer(skb) - sizeof(*hdr));
skb_trim(skb, le16_to_cpu(hdr->len) & 0x0FFF);
signal = hdr->agc >> 1;
rate = (le16_to_cpu(hdr->rate) >> 4) & 0xF;
if (rate > 3) { /* OFDM rate */
if (signal > 90)
signal = 90;
else if (signal < 25)
signal = 25;
signal = 90 - signal;
} else { /* CCK rate */
if (signal > 95)
signal = 95;
else if (signal < 30)
signal = 30;
signal = 95 - signal;
}
rx_status.antenna = (hdr->signal >> 7) & 1;
rx_status.signal = 64 - min(hdr->noise, (u8)64);
rx_status.ssi = signal;
rx_status.rate = rate;
rx_status.freq = dev->conf.freq;
rx_status.channel = dev->conf.channel;
rx_status.phymode = dev->conf.phymode;
rx_status.mactime = le64_to_cpu(hdr->mac_time);
ieee80211_rx_irqsafe(dev, skb, &rx_status);
skb = dev_alloc_skb(RTL8187_MAX_RX);
if (unlikely(!skb)) {
usb_free_urb(urb);
/* TODO check rx queue length and refill *somewhere* */
return;
}
info = (struct rtl8187_rx_info *)skb->cb;
info->urb = urb;
info->dev = dev;
urb->transfer_buffer = skb_tail_pointer(skb);
urb->context = skb;
skb_queue_tail(&priv->rx_queue, skb);
usb_submit_urb(urb, GFP_ATOMIC);
}
static int rtl8187_init_urbs(struct ieee80211_hw *dev)
{
struct rtl8187_priv *priv = dev->priv;
struct urb *entry;
struct sk_buff *skb;
struct rtl8187_rx_info *info;
while (skb_queue_len(&priv->rx_queue) < 8) {
skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL);
if (!skb)
break;
entry = usb_alloc_urb(0, GFP_KERNEL);
if (!entry) {
kfree_skb(skb);
break;
}
usb_fill_bulk_urb(entry, priv->udev,
usb_rcvbulkpipe(priv->udev, 1),
skb_tail_pointer(skb),
RTL8187_MAX_RX, rtl8187_rx_cb, skb);
info = (struct rtl8187_rx_info *)skb->cb;
info->urb = entry;
info->dev = dev;
skb_queue_tail(&priv->rx_queue, skb);
usb_submit_urb(entry, GFP_KERNEL);
}
return 0;
}
static int rtl8187_init_hw(struct ieee80211_hw *dev)
{
struct rtl8187_priv *priv = dev->priv;
u8 reg;
int i;
/* reset */
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON);
rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
msleep(200);
rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10);
rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11);
rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00);
msleep(200);
reg = rtl818x_ioread8(priv, &priv->map->CMD);
reg &= (1 << 1);
reg |= RTL818X_CMD_RESET;
rtl818x_iowrite8(priv, &priv->map->CMD, reg);
i = 10;
do {
msleep(2);
if (!(rtl818x_ioread8(priv, &priv->map->CMD) &
RTL818X_CMD_RESET))
break;
} while (--i);
if (!i) {
printk(KERN_ERR "%s: Reset timeout!\n", wiphy_name(dev->wiphy));
return -ETIMEDOUT;
}
/* reload registers from eeprom */
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
i = 10;
do {
msleep(4);
if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) &
RTL818X_EEPROM_CMD_CONFIG))
break;
} while (--i);
if (!i) {
printk(KERN_ERR "%s: eeprom reset timeout!\n",
wiphy_name(dev->wiphy));
return -ETIMEDOUT;
}
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON);
rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
/* setup card */
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
rtl818x_iowrite8(priv, &priv->map->GPIO, 1);
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
for (i = 0; i < ETH_ALEN; i++)
rtl818x_iowrite8(priv, &priv->map->MAC[i], priv->hwaddr[i]);
rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
reg &= 0x3F;
reg |= 0x80;
rtl818x_iowrite8(priv, &priv->map->CONFIG1, reg);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
// TODO: set RESP_RATE and BRSR properly
rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
/* host_usb_init */
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7));
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
rtl818x_iowrite8(priv, &priv->map->GPIO, 0x20);
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80);
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80);
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x80);
msleep(100);
rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7);
msleep(100);
priv->rf_init(dev);
rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
reg = rtl818x_ioread16(priv, &priv->map->PGSELECT) & 0xfffe;
rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg | 0x1);
rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10);
rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80);
rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60);
rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg);
return 0;
}
static void rtl8187_set_channel(struct ieee80211_hw *dev, int channel)
{
u32 reg;
struct rtl8187_priv *priv = dev->priv;
reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
/* Enable TX loopback on MAC level to avoid TX during channel
* changes, as this has be seen to causes problems and the
* card will stop work until next reset
*/
rtl818x_iowrite32(priv, &priv->map->TX_CONF,
reg | RTL818X_TX_CONF_LOOPBACK_MAC);
msleep(10);
rtl8225_rf_set_channel(dev, channel);
msleep(10);
rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
}
static int rtl8187_open(struct ieee80211_hw *dev)
{
struct rtl8187_priv *priv = dev->priv;
u32 reg;
int ret;
ret = rtl8187_init_hw(dev);
if (ret)
return ret;
rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
rtl8187_init_urbs(dev);
reg = RTL818X_RX_CONF_ONLYERLPKT |
RTL818X_RX_CONF_RX_AUTORESETPHY |
RTL818X_RX_CONF_BSSID |
RTL818X_RX_CONF_MGMT |
RTL818X_RX_CONF_CTRL |
RTL818X_RX_CONF_DATA |
(7 << 13 /* RX FIFO threshold NONE */) |
(7 << 10 /* MAX RX DMA */) |
RTL818X_RX_CONF_BROADCAST |
RTL818X_RX_CONF_MULTICAST |
RTL818X_RX_CONF_NICMAC;
if (priv->mode == IEEE80211_IF_TYPE_MNTR)
reg |= RTL818X_RX_CONF_MONITOR;
rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
reg = RTL818X_TX_CONF_CW_MIN |
(7 << 21 /* MAX TX DMA */) |
RTL818X_TX_CONF_NO_ICV;
rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->CMD);
reg |= RTL818X_CMD_TX_ENABLE;
reg |= RTL818X_CMD_RX_ENABLE;
rtl818x_iowrite8(priv, &priv->map->CMD, reg);
return 0;
}
static int rtl8187_stop(struct ieee80211_hw *dev)
{
struct rtl8187_priv *priv = dev->priv;
struct rtl8187_rx_info *info;
struct sk_buff *skb;
u32 reg;
rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
reg = rtl818x_ioread8(priv, &priv->map->CMD);
reg &= ~RTL818X_CMD_TX_ENABLE;
reg &= ~RTL818X_CMD_RX_ENABLE;
rtl818x_iowrite8(priv, &priv->map->CMD, reg);
rtl8225_rf_stop(dev);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
while ((skb = skb_dequeue(&priv->rx_queue))) {
info = (struct rtl8187_rx_info *)skb->cb;
usb_kill_urb(info->urb);
kfree_skb(skb);
}
return 0;
}
static int rtl8187_add_interface(struct ieee80211_hw *dev,
struct ieee80211_if_init_conf *conf)
{
struct rtl8187_priv *priv = dev->priv;
/* NOTE: using IEEE80211_IF_TYPE_MGMT to indicate no mode selected */
if (priv->mode != IEEE80211_IF_TYPE_MGMT)
return -1;
switch (conf->type) {
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_MNTR:
priv->mode = conf->type;
break;
default:
return -EOPNOTSUPP;
}
priv->hwaddr = conf->mac_addr;
return 0;
}
static void rtl8187_remove_interface(struct ieee80211_hw *dev,
struct ieee80211_if_init_conf *conf)
{
struct rtl8187_priv *priv = dev->priv;
priv->mode = IEEE80211_IF_TYPE_MGMT;
}
static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
{
struct rtl8187_priv *priv = dev->priv;
rtl8187_set_channel(dev, conf->channel);
rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) {
rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14);
rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0x73);
} else {
rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24);
rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0xa5);
}
rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100);
rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100);
return 0;
}
static int rtl8187_config_interface(struct ieee80211_hw *dev, int if_id,
struct ieee80211_if_conf *conf)
{
struct rtl8187_priv *priv = dev->priv;
int i;
for (i = 0; i < ETH_ALEN; i++)
rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
if (is_valid_ether_addr(conf->bssid))
rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
else
rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
return 0;
}
static const struct ieee80211_ops rtl8187_ops = {
.tx = rtl8187_tx,
.open = rtl8187_open,
.stop = rtl8187_stop,
.add_interface = rtl8187_add_interface,
.remove_interface = rtl8187_remove_interface,
.config = rtl8187_config,
.config_interface = rtl8187_config_interface,
};
static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom)
{
struct ieee80211_hw *dev = eeprom->data;
struct rtl8187_priv *priv = dev->priv;
u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
}
static void rtl8187_eeprom_register_write(struct eeprom_93cx6 *eeprom)
{
struct ieee80211_hw *dev = eeprom->data;
struct rtl8187_priv *priv = dev->priv;
u8 reg = RTL818X_EEPROM_CMD_PROGRAM;
if (eeprom->reg_data_in)
reg |= RTL818X_EEPROM_CMD_WRITE;
if (eeprom->reg_data_out)
reg |= RTL818X_EEPROM_CMD_READ;
if (eeprom->reg_data_clock)
reg |= RTL818X_EEPROM_CMD_CK;
if (eeprom->reg_chip_select)
reg |= RTL818X_EEPROM_CMD_CS;
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
udelay(10);
}
static int __devinit rtl8187_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct ieee80211_hw *dev;
struct rtl8187_priv *priv;
struct eeprom_93cx6 eeprom;
struct ieee80211_channel *channel;
u16 txpwr, reg;
int err, i;
dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops);
if (!dev) {
printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n");
return -ENOMEM;
}
priv = dev->priv;
SET_IEEE80211_DEV(dev, &intf->dev);
usb_set_intfdata(intf, dev);
priv->udev = udev;
usb_get_dev(udev);
skb_queue_head_init(&priv->rx_queue);
memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
priv->map = (struct rtl818x_csr *)0xFF00;
priv->modes[0].mode = MODE_IEEE80211G;
priv->modes[0].num_rates = ARRAY_SIZE(rtl818x_rates);
priv->modes[0].rates = priv->rates;
priv->modes[0].num_channels = ARRAY_SIZE(rtl818x_channels);
priv->modes[0].channels = priv->channels;
priv->modes[1].mode = MODE_IEEE80211B;
priv->modes[1].num_rates = 4;
priv->modes[1].rates = priv->rates;
priv->modes[1].num_channels = ARRAY_SIZE(rtl818x_channels);
priv->modes[1].channels = priv->channels;
priv->mode = IEEE80211_IF_TYPE_MGMT;
dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_WEP_INCLUDE_IV |
IEEE80211_HW_DATA_NULLFUNC_ACK;
dev->extra_tx_headroom = sizeof(struct rtl8187_tx_hdr);
dev->queues = 1;
dev->max_rssi = 65;
dev->max_signal = 64;
for (i = 0; i < 2; i++)
if ((err = ieee80211_register_hwmode(dev, &priv->modes[i])))
goto err_free_dev;
eeprom.data = dev;
eeprom.register_read = rtl8187_eeprom_register_read;
eeprom.register_write = rtl8187_eeprom_register_write;
if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
eeprom.width = PCI_EEPROM_WIDTH_93C66;
else
eeprom.width = PCI_EEPROM_WIDTH_93C46;
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
udelay(10);
eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR,
(__le16 __force *)dev->wiphy->perm_addr, 3);
if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly "
"generated MAC address\n");
random_ether_addr(dev->wiphy->perm_addr);
}
channel = priv->channels;
for (i = 0; i < 3; i++) {
eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_1 + i,
&txpwr);
(*channel++).val = txpwr & 0xFF;
(*channel++).val = txpwr >> 8;
}
for (i = 0; i < 2; i++) {
eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_4 + i,
&txpwr);
(*channel++).val = txpwr & 0xFF;
(*channel++).val = txpwr >> 8;
}
for (i = 0; i < 2; i++) {
eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6 + i,
&txpwr);
(*channel++).val = txpwr & 0xFF;
(*channel++).val = txpwr >> 8;
}
eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_BASE,
&priv->txpwr_base);
reg = rtl818x_ioread16(priv, &priv->map->PGSELECT) & ~1;
rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg | 1);
/* 0 means asic B-cut, we should use SW 3 wire
* bit-by-bit banging for radio. 1 means we can use
* USB specific request to write radio registers */
priv->asic_rev = rtl818x_ioread8(priv, (u8 *)0xFFFE) & 0x3;
rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
rtl8225_write(dev, 0, 0x1B7);
if (rtl8225_read(dev, 8) != 0x588 || rtl8225_read(dev, 9) != 0x700)
priv->rf_init = rtl8225_rf_init;
else
priv->rf_init = rtl8225z2_rf_init;
rtl8225_write(dev, 0, 0x0B7);
err = ieee80211_register_hw(dev);
if (err) {
printk(KERN_ERR "rtl8187: Cannot register device\n");
goto err_free_dev;
}
printk(KERN_INFO "%s: hwaddr " MAC_FMT ", rtl8187 V%d + %s\n",
wiphy_name(dev->wiphy), MAC_ARG(dev->wiphy->perm_addr),
priv->asic_rev, priv->rf_init == rtl8225_rf_init ?
"rtl8225" : "rtl8225z2");
return 0;
err_free_dev:
ieee80211_free_hw(dev);
usb_set_intfdata(intf, NULL);
usb_put_dev(udev);
return err;
}
static void __devexit rtl8187_disconnect(struct usb_interface *intf)
{
struct ieee80211_hw *dev = usb_get_intfdata(intf);
struct rtl8187_priv *priv;
if (!dev)
return;
ieee80211_unregister_hw(dev);
priv = dev->priv;
usb_put_dev(interface_to_usbdev(intf));
ieee80211_free_hw(dev);
}
static struct usb_driver rtl8187_driver = {
.name = KBUILD_MODNAME,
.id_table = rtl8187_table,
.probe = rtl8187_probe,
.disconnect = rtl8187_disconnect,
};
static int __init rtl8187_init(void)
{
return usb_register(&rtl8187_driver);
}
static void __exit rtl8187_exit(void)
{
usb_deregister(&rtl8187_driver);
}
module_init(rtl8187_init);
module_exit(rtl8187_exit);

744
drivers/net/wireless/rtl8187_rtl8225.c Normal file
View File

@ -0,0 +1,744 @@
/*
* Radio tuning for RTL8225 on RTL8187
*
* Copyright 2007 Michael Wu <flamingice@sourmilk.net>
* Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
*
* Based on the r8187 driver, which is:
* Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
*
* Thanks to Realtek for their support!
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/usb.h>
#include <net/mac80211.h>
#include "rtl8187.h"
#include "rtl8187_rtl8225.h"
static void rtl8225_write_bitbang(struct ieee80211_hw *dev, u8 addr, u16 data)
{
struct rtl8187_priv *priv = dev->priv;
u16 reg80, reg84, reg82;
u32 bangdata;
int i;
bangdata = (data << 4) | (addr & 0xf);
reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput) & 0xfff3;
reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x7);
reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x7);
udelay(10);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
udelay(2);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
udelay(10);
for (i = 15; i >= 0; i--) {
u16 reg = reg80 | (bangdata & (1 << i)) >> i;
if (i & 1)
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
if (!(i & 1))
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
}
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
udelay(10);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
msleep(2);
}
static void rtl8225_write_8051(struct ieee80211_hw *dev, u8 addr, u16 data)
{
struct rtl8187_priv *priv = dev->priv;
u16 reg80, reg82, reg84;
reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
reg80 &= ~(0x3 << 2);
reg84 &= ~0xF;
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x0007);
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x0007);
udelay(10);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
udelay(2);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
udelay(10);
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
addr, 0x8225, &data, sizeof(data), HZ / 2);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
udelay(10);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
msleep(2);
}
void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data)
{
struct rtl8187_priv *priv = dev->priv;
if (priv->asic_rev)
rtl8225_write_8051(dev, addr, data);
else
rtl8225_write_bitbang(dev, addr, data);
}
u16 rtl8225_read(struct ieee80211_hw *dev, u8 addr)
{
struct rtl8187_priv *priv = dev->priv;
u16 reg80, reg82, reg84, out;
int i;
reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
reg80 &= ~0xF;
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x000F);
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x000F);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
udelay(4);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
udelay(5);
for (i = 4; i >= 0; i--) {
u16 reg = reg80 | ((addr >> i) & 1);
if (!(i & 1)) {
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
udelay(1);
}
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
reg | (1 << 1));
udelay(2);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
reg | (1 << 1));
udelay(2);
if (i & 1) {
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
udelay(1);
}
}
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
reg80 | (1 << 3) | (1 << 1));
udelay(2);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
reg80 | (1 << 3));
udelay(2);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
reg80 | (1 << 3));
udelay(2);
out = 0;
for (i = 11; i >= 0; i--) {
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
reg80 | (1 << 3));
udelay(1);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
reg80 | (1 << 3) | (1 << 1));
udelay(2);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
reg80 | (1 << 3) | (1 << 1));
udelay(2);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
reg80 | (1 << 3) | (1 << 1));
udelay(2);
if (rtl818x_ioread16(priv, &priv->map->RFPinsInput) & (1 << 1))
out |= 1 << i;
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
reg80 | (1 << 3));
udelay(2);
}
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
reg80 | (1 << 3) | (1 << 2));
udelay(2);
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82);
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x03A0);
return out;
}
static const u16 rtl8225bcd_rxgain[] = {
0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3,
0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb
};
static const u8 rtl8225_agc[] = {
0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e,
0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96,
0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e,
0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86,
0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e,
0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36,
0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e,
0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26,
0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e,
0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16,
0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e,
0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06,
0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01,
0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01
};
static const u8 rtl8225_gain[] = {
0x23, 0x88, 0x7c, 0xa5, /* -82dBm */
0x23, 0x88, 0x7c, 0xb5, /* -82dBm */
0x23, 0x88, 0x7c, 0xc5, /* -82dBm */
0x33, 0x80, 0x79, 0xc5, /* -78dBm */
0x43, 0x78, 0x76, 0xc5, /* -74dBm */
0x53, 0x60, 0x73, 0xc5, /* -70dBm */
0x63, 0x58, 0x70, 0xc5, /* -66dBm */
};
static const u8 rtl8225_threshold[] = {
0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd
};
static const u8 rtl8225_tx_gain_cck_ofdm[] = {
0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
};
static const u8 rtl8225_tx_power_cck[] = {
0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
};
static const u8 rtl8225_tx_power_cck_ch14[] = {
0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
};
static const u8 rtl8225_tx_power_ofdm[] = {
0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
};
static const u32 rtl8225_chan[] = {
0x085c, 0x08dc, 0x095c, 0x09dc, 0x0a5c, 0x0adc, 0x0b5c,
0x0bdc, 0x0c5c, 0x0cdc, 0x0d5c, 0x0ddc, 0x0e5c, 0x0f72
};
static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
{
struct rtl8187_priv *priv = dev->priv;
u8 cck_power, ofdm_power;
const u8 *tmp;
u32 reg;
int i;
cck_power = priv->channels[channel - 1].val & 0xF;
ofdm_power = priv->channels[channel - 1].val >> 4;
cck_power = min(cck_power, (u8)11);
ofdm_power = min(ofdm_power, (u8)35);
rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
if (channel == 14)
tmp = &rtl8225_tx_power_cck_ch14[(cck_power % 6) * 8];
else
tmp = &rtl8225_tx_power_cck[(cck_power % 6) * 8];
for (i = 0; i < 8; i++)
rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
msleep(1); // FIXME: optional?
/* anaparam2 on */
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
rtl8225_write_phy_ofdm(dev, 2, 0x42);
rtl8225_write_phy_ofdm(dev, 6, 0x00);
rtl8225_write_phy_ofdm(dev, 8, 0x00);
rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
rtl8225_tx_gain_cck_ofdm[ofdm_power / 6] >> 1);
tmp = &rtl8225_tx_power_ofdm[ofdm_power % 6];
rtl8225_write_phy_ofdm(dev, 5, *tmp);
rtl8225_write_phy_ofdm(dev, 7, *tmp);
msleep(1);
}
void rtl8225_rf_init(struct ieee80211_hw *dev)
{
struct rtl8187_priv *priv = dev->priv;
int i;
rtl8225_write(dev, 0x0, 0x067); msleep(1);
rtl8225_write(dev, 0x1, 0xFE0); msleep(1);
rtl8225_write(dev, 0x2, 0x44D); msleep(1);
rtl8225_write(dev, 0x3, 0x441); msleep(1);
rtl8225_write(dev, 0x4, 0x486); msleep(1);
rtl8225_write(dev, 0x5, 0xBC0); msleep(1);
rtl8225_write(dev, 0x6, 0xAE6); msleep(1);
rtl8225_write(dev, 0x7, 0x82A); msleep(1);
rtl8225_write(dev, 0x8, 0x01F); msleep(1);
rtl8225_write(dev, 0x9, 0x334); msleep(1);
rtl8225_write(dev, 0xA, 0xFD4); msleep(1);
rtl8225_write(dev, 0xB, 0x391); msleep(1);
rtl8225_write(dev, 0xC, 0x050); msleep(1);
rtl8225_write(dev, 0xD, 0x6DB); msleep(1);
rtl8225_write(dev, 0xE, 0x029); msleep(1);
rtl8225_write(dev, 0xF, 0x914); msleep(100);
rtl8225_write(dev, 0x2, 0xC4D); msleep(200);
rtl8225_write(dev, 0x2, 0x44D); msleep(200);
if (!(rtl8225_read(dev, 6) & (1 << 7))) {
rtl8225_write(dev, 0x02, 0x0c4d);
msleep(200);
rtl8225_write(dev, 0x02, 0x044d);
msleep(100);
if (!(rtl8225_read(dev, 6) & (1 << 7)))
printk(KERN_WARNING "%s: RF Calibration Failed! %x\n",
wiphy_name(dev->wiphy), rtl8225_read(dev, 6));
}
rtl8225_write(dev, 0x0, 0x127);
for (i = 0; i < ARRAY_SIZE(rtl8225bcd_rxgain); i++) {
rtl8225_write(dev, 0x1, i + 1);
rtl8225_write(dev, 0x2, rtl8225bcd_rxgain[i]);
}
rtl8225_write(dev, 0x0, 0x027);
rtl8225_write(dev, 0x0, 0x22F);
for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
msleep(1);
rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
msleep(1);
}
msleep(1);
rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x02, 0x42); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x06, 0x40); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x08, 0x40); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x11, 0x06); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x1b, 0x76); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x21, 0x27); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x25, 0x20); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[2 * 4]);
rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[2 * 4 + 2]);
rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[2 * 4 + 3]);
rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[2 * 4 + 1]);
rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1);
rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1);
rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1);
rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1);
rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1);
rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1);
rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1);
rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1);
rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1);
rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1);
rtl8225_write_phy_cck(dev, 0x13, 0xd0);
rtl8225_write_phy_cck(dev, 0x19, 0x00);
rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
rtl8225_write_phy_cck(dev, 0x1b, 0x08);
rtl8225_write_phy_cck(dev, 0x40, 0x86);
rtl8225_write_phy_cck(dev, 0x41, 0x8d); msleep(1);
rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1);
rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1);
rtl8225_write_phy_cck(dev, 0x44, 0x1f); msleep(1);
rtl8225_write_phy_cck(dev, 0x45, 0x1e); msleep(1);
rtl8225_write_phy_cck(dev, 0x46, 0x1a); msleep(1);
rtl8225_write_phy_cck(dev, 0x47, 0x15); msleep(1);
rtl8225_write_phy_cck(dev, 0x48, 0x10); msleep(1);
rtl8225_write_phy_cck(dev, 0x49, 0x0a); msleep(1);
rtl8225_write_phy_cck(dev, 0x4a, 0x05); msleep(1);
rtl8225_write_phy_cck(dev, 0x4b, 0x02); msleep(1);
rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1);
rtl818x_iowrite8(priv, &priv->map->TESTR, 0x0D);
rtl8225_rf_set_tx_power(dev, 1);
/* RX antenna default to A */
rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1); /* B: 0xDB */
rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1); /* B: 0x10 */
rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */
msleep(1);
rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);
/* set sensitivity */
rtl8225_write(dev, 0x0c, 0x50);
rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[2 * 4]);
rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[2 * 4 + 2]);
rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[2 * 4 + 3]);
rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[2 * 4 + 1]);
rtl8225_write_phy_cck(dev, 0x41, rtl8225_threshold[2]);
}
static const u8 rtl8225z2_tx_power_cck_ch14[] = {
0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
};
static const u8 rtl8225z2_tx_power_cck[] = {
0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
};
static const u8 rtl8225z2_tx_power_ofdm[] = {
0x42, 0x00, 0x40, 0x00, 0x40
};
static const u8 rtl8225z2_tx_gain_cck_ofdm[] = {
0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11,
0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d,
0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23
};
static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
{
struct rtl8187_priv *priv = dev->priv;
u8 cck_power, ofdm_power;
const u8 *tmp;
u32 reg;
int i;
cck_power = priv->channels[channel - 1].val & 0xF;
ofdm_power = priv->channels[channel - 1].val >> 4;
cck_power = min(cck_power, (u8)15);
cck_power += priv->txpwr_base & 0xF;
cck_power = min(cck_power, (u8)35);
ofdm_power = min(ofdm_power, (u8)15);
ofdm_power += priv->txpwr_base >> 4;
ofdm_power = min(ofdm_power, (u8)35);
if (channel == 14)
tmp = rtl8225z2_tx_power_cck_ch14;
else
tmp = rtl8225z2_tx_power_cck;
for (i = 0; i < 8; i++)
rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
rtl8225z2_tx_gain_cck_ofdm[cck_power]);
msleep(1);
/* anaparam2 on */
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
rtl8225_write_phy_ofdm(dev, 2, 0x42);
rtl8225_write_phy_ofdm(dev, 5, 0x00);
rtl8225_write_phy_ofdm(dev, 6, 0x40);
rtl8225_write_phy_ofdm(dev, 7, 0x00);
rtl8225_write_phy_ofdm(dev, 8, 0x40);
rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
rtl8225z2_tx_gain_cck_ofdm[ofdm_power]);
msleep(1);
}
static const u16 rtl8225z2_rxgain[] = {
0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
};
static const u8 rtl8225z2_gain_bg[] = {
0x23, 0x15, 0xa5, /* -82-1dBm */
0x23, 0x15, 0xb5, /* -82-2dBm */
0x23, 0x15, 0xc5, /* -82-3dBm */
0x33, 0x15, 0xc5, /* -78dBm */
0x43, 0x15, 0xc5, /* -74dBm */
0x53, 0x15, 0xc5, /* -70dBm */
0x63, 0x15, 0xc5 /* -66dBm */
};
void rtl8225z2_rf_init(struct ieee80211_hw *dev)
{
struct rtl8187_priv *priv = dev->priv;
int i;
rtl8225_write(dev, 0x0, 0x2BF); msleep(1);
rtl8225_write(dev, 0x1, 0xEE0); msleep(1);
rtl8225_write(dev, 0x2, 0x44D); msleep(1);
rtl8225_write(dev, 0x3, 0x441); msleep(1);
rtl8225_write(dev, 0x4, 0x8C3); msleep(1);
rtl8225_write(dev, 0x5, 0xC72); msleep(1);
rtl8225_write(dev, 0x6, 0x0E6); msleep(1);
rtl8225_write(dev, 0x7, 0x82A); msleep(1);
rtl8225_write(dev, 0x8, 0x03F); msleep(1);
rtl8225_write(dev, 0x9, 0x335); msleep(1);
rtl8225_write(dev, 0xa, 0x9D4); msleep(1);
rtl8225_write(dev, 0xb, 0x7BB); msleep(1);
rtl8225_write(dev, 0xc, 0x850); msleep(1);
rtl8225_write(dev, 0xd, 0xCDF); msleep(1);
rtl8225_write(dev, 0xe, 0x02B); msleep(1);
rtl8225_write(dev, 0xf, 0x114); msleep(100);
rtl8225_write(dev, 0x0, 0x1B7);
for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
rtl8225_write(dev, 0x1, i + 1);
rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]);
}
rtl8225_write(dev, 0x3, 0x080);
rtl8225_write(dev, 0x5, 0x004);
rtl8225_write(dev, 0x0, 0x0B7);
rtl8225_write(dev, 0x2, 0xc4D);
msleep(200);
rtl8225_write(dev, 0x2, 0x44D);
msleep(100);
if (!(rtl8225_read(dev, 6) & (1 << 7))) {
rtl8225_write(dev, 0x02, 0x0C4D);
msleep(200);
rtl8225_write(dev, 0x02, 0x044D);
msleep(100);
if (!(rtl8225_read(dev, 6) & (1 << 7)))
printk(KERN_WARNING "%s: RF Calibration Failed! %x\n",
wiphy_name(dev->wiphy), rtl8225_read(dev, 6));
}
msleep(200);
rtl8225_write(dev, 0x0, 0x2BF);
for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
msleep(1);
rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
msleep(1);
}
msleep(1);
rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x02, 0x42); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x06, 0x40); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x08, 0x40); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x0a, 0x08); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x0d, 0x43);
rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x11, 0x07); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x1b, 0x15); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x1d, 0xc5); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x21, 0x17); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x23, 0x80); msleep(1); //FIXME: not needed?
rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x25, 0x00); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1);
rtl8225_write_phy_ofdm(dev, 0x0b, rtl8225z2_gain_bg[4 * 3]);
rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225z2_gain_bg[4 * 3 + 1]);
rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225z2_gain_bg[4 * 3 + 2]);
rtl8225_write_phy_ofdm(dev, 0x21, 0x37);
rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1);
rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1);
rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1);
rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1);
rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1);
rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1);
rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1);
rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1);
rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1);
rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1);
rtl8225_write_phy_cck(dev, 0x13, 0xd0);
rtl8225_write_phy_cck(dev, 0x19, 0x00);
rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
rtl8225_write_phy_cck(dev, 0x1b, 0x08);
rtl8225_write_phy_cck(dev, 0x40, 0x86);
rtl8225_write_phy_cck(dev, 0x41, 0x8d); msleep(1);
rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1);
rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1);
rtl8225_write_phy_cck(dev, 0x44, 0x36); msleep(1);
rtl8225_write_phy_cck(dev, 0x45, 0x35); msleep(1);
rtl8225_write_phy_cck(dev, 0x46, 0x2e); msleep(1);
rtl8225_write_phy_cck(dev, 0x47, 0x25); msleep(1);
rtl8225_write_phy_cck(dev, 0x48, 0x1c); msleep(1);
rtl8225_write_phy_cck(dev, 0x49, 0x12); msleep(1);
rtl8225_write_phy_cck(dev, 0x4a, 0x09); msleep(1);
rtl8225_write_phy_cck(dev, 0x4b, 0x04); msleep(1);
rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1);
rtl818x_iowrite8(priv, (u8 *)0xFF5B, 0x0D); msleep(1);
rtl8225z2_rf_set_tx_power(dev, 1);
/* RX antenna default to A */
rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1); /* B: 0xDB */
rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1); /* B: 0x10 */
rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */
msleep(1);
rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);
}
void rtl8225_rf_stop(struct ieee80211_hw *dev)
{
u8 reg;
struct rtl8187_priv *priv = dev->priv;
rtl8225_write(dev, 0x4, 0x1f); msleep(1);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_OFF);
rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_OFF);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
}
void rtl8225_rf_set_channel(struct ieee80211_hw *dev, int channel)
{
struct rtl8187_priv *priv = dev->priv;
if (priv->rf_init == rtl8225_rf_init)
rtl8225_rf_set_tx_power(dev, channel);
else
rtl8225z2_rf_set_tx_power(dev, channel);
rtl8225_write(dev, 0x7, rtl8225_chan[channel - 1]);
msleep(10);
}

30
drivers/net/wireless/rtl8187_rtl8225.h Normal file
View File

@ -0,0 +1,30 @@
#ifndef RTL8187_RTL8225_H
#define RTL8187_RTL8225_H
#define RTL8225_ANAPARAM_ON 0xa0000a59
#define RTL8225_ANAPARAM2_ON 0x860c7312
#define RTL8225_ANAPARAM_OFF 0xa00beb59
#define RTL8225_ANAPARAM2_OFF 0x840dec11
void rtl8225_write(struct ieee80211_hw *, u8 addr, u16 data);
u16 rtl8225_read(struct ieee80211_hw *, u8 addr);
void rtl8225_rf_init(struct ieee80211_hw *);
void rtl8225z2_rf_init(struct ieee80211_hw *);
void rtl8225_rf_stop(struct ieee80211_hw *);
void rtl8225_rf_set_channel(struct ieee80211_hw *, int);
static inline void rtl8225_write_phy_ofdm(struct ieee80211_hw *dev,
u8 addr, u32 data)
{
rtl8187_write_phy(dev, addr, data);
}
static inline void rtl8225_write_phy_cck(struct ieee80211_hw *dev,
u8 addr, u32 data)
{
rtl8187_write_phy(dev, addr, data | 0x10000);
}
#endif /* RTL8187_RTL8225_H */

212
drivers/net/wireless/rtl818x.h Normal file
View File

@ -0,0 +1,212 @@
#ifndef RTL818X_H
#define RTL818X_H
struct rtl818x_csr {
u8 MAC[6];
u8 reserved_0[2];
__le32 MAR[2];
u8 RX_FIFO_COUNT;
u8 reserved_1;
u8 TX_FIFO_COUNT;
u8 BQREQ;
u8 reserved_2[4];
__le32 TSFT[2];
__le32 TLPDA;
__le32 TNPDA;
__le32 THPDA;
__le16 BRSR;
u8 BSSID[6];
u8 RESP_RATE;
u8 EIFS;
u8 reserved_3[1];
u8 CMD;
#define RTL818X_CMD_TX_ENABLE (1 << 2)
#define RTL818X_CMD_RX_ENABLE (1 << 3)
#define RTL818X_CMD_RESET (1 << 4)
u8 reserved_4[4];
__le16 INT_MASK;
__le16 INT_STATUS;
#define RTL818X_INT_RX_OK (1 << 0)
#define RTL818X_INT_RX_ERR (1 << 1)
#define RTL818X_INT_TXL_OK (1 << 2)
#define RTL818X_INT_TXL_ERR (1 << 3)
#define RTL818X_INT_RX_DU (1 << 4)
#define RTL818X_INT_RX_FO (1 << 5)
#define RTL818X_INT_TXN_OK (1 << 6)
#define RTL818X_INT_TXN_ERR (1 << 7)
#define RTL818X_INT_TXH_OK (1 << 8)
#define RTL818X_INT_TXH_ERR (1 << 9)
#define RTL818X_INT_TXB_OK (1 << 10)
#define RTL818X_INT_TXB_ERR (1 << 11)
#define RTL818X_INT_ATIM (1 << 12)
#define RTL818X_INT_BEACON (1 << 13)
#define RTL818X_INT_TIME_OUT (1 << 14)
#define RTL818X_INT_TX_FO (1 << 15)
__le32 TX_CONF;
#define RTL818X_TX_CONF_LOOPBACK_MAC (1 << 17)
#define RTL818X_TX_CONF_NO_ICV (1 << 19)
#define RTL818X_TX_CONF_DISCW (1 << 20)
#define RTL818X_TX_CONF_R8180_ABCD (2 << 25)
#define RTL818X_TX_CONF_R8180_F (3 << 25)
#define RTL818X_TX_CONF_R8185_ABC (4 << 25)
#define RTL818X_TX_CONF_R8185_D (5 << 25)
#define RTL818X_TX_CONF_HWVER_MASK (7 << 25)
#define RTL818X_TX_CONF_CW_MIN (1 << 31)
__le32 RX_CONF;
#define RTL818X_RX_CONF_MONITOR (1 << 0)
#define RTL818X_RX_CONF_NICMAC (1 << 1)
#define RTL818X_RX_CONF_MULTICAST (1 << 2)
#define RTL818X_RX_CONF_BROADCAST (1 << 3)
#define RTL818X_RX_CONF_DATA (1 << 18)
#define RTL818X_RX_CONF_CTRL (1 << 19)
#define RTL818X_RX_CONF_MGMT (1 << 20)
#define RTL818X_RX_CONF_BSSID (1 << 23)
#define RTL818X_RX_CONF_RX_AUTORESETPHY (1 << 28)
#define RTL818X_RX_CONF_ONLYERLPKT (1 << 31)
__le32 INT_TIMEOUT;
__le32 TBDA;
u8 EEPROM_CMD;
#define RTL818X_EEPROM_CMD_READ (1 << 0)
#define RTL818X_EEPROM_CMD_WRITE (1 << 1)
#define RTL818X_EEPROM_CMD_CK (1 << 2)
#define RTL818X_EEPROM_CMD_CS (1 << 3)
#define RTL818X_EEPROM_CMD_NORMAL (0 << 6)
#define RTL818X_EEPROM_CMD_LOAD (1 << 6)
#define RTL818X_EEPROM_CMD_PROGRAM (2 << 6)
#define RTL818X_EEPROM_CMD_CONFIG (3 << 6)
u8 CONFIG0;
u8 CONFIG1;
u8 CONFIG2;
__le32 ANAPARAM;
u8 MSR;
#define RTL818X_MSR_NO_LINK (0 << 2)
#define RTL818X_MSR_ADHOC (1 << 2)
#define RTL818X_MSR_INFRA (2 << 2)
u8 CONFIG3;
#define RTL818X_CONFIG3_ANAPARAM_WRITE (1 << 6)
u8 CONFIG4;
#define RTL818X_CONFIG4_POWEROFF (1 << 6)
#define RTL818X_CONFIG4_VCOOFF (1 << 7)
u8 TESTR;
u8 reserved_9[2];
__le16 PGSELECT;
__le32 ANAPARAM2;
u8 reserved_10[12];
__le16 BEACON_INTERVAL;
__le16 ATIM_WND;
__le16 BEACON_INTERVAL_TIME;
__le16 ATIMTR_INTERVAL;
u8 reserved_11[4];
u8 PHY[4];
__le16 RFPinsOutput;
__le16 RFPinsEnable;
__le16 RFPinsSelect;
__le16 RFPinsInput;
__le32 RF_PARA;
__le32 RF_TIMING;
u8 GP_ENABLE;
u8 GPIO;
u8 reserved_12[10];
u8 TX_AGC_CTL;
#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT (1 << 0)
#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT (1 << 1)
#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2)
u8 TX_GAIN_CCK;
u8 TX_GAIN_OFDM;
u8 TX_ANTENNA;
u8 reserved_13[16];
u8 WPA_CONF;
u8 reserved_14[3];
u8 SIFS;
u8 DIFS;
u8 SLOT;
u8 reserved_15[5];
u8 CW_CONF;
#define RTL818X_CW_CONF_PERPACKET_CW_SHIFT (1 << 0)
#define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT (1 << 1)
u8 CW_VAL;
u8 RATE_FALLBACK;
u8 reserved_16[25];
u8 CONFIG5;
u8 TX_DMA_POLLING;
u8 reserved_17[2];
__le16 CWR;
u8 RETRY_CTR;
u8 reserved_18[5];
__le32 RDSAR;
u8 reserved_19[18];
u16 TALLY_CNT;
u8 TALLY_SEL;
} __attribute__((packed));
static const struct ieee80211_rate rtl818x_rates[] = {
{ .rate = 10,
.val = 0,
.flags = IEEE80211_RATE_CCK },
{ .rate = 20,
.val = 1,
.flags = IEEE80211_RATE_CCK },
{ .rate = 55,
.val = 2,
.flags = IEEE80211_RATE_CCK },
{ .rate = 110,
.val = 3,
.flags = IEEE80211_RATE_CCK },
{ .rate = 60,
.val = 4,
.flags = IEEE80211_RATE_OFDM },
{ .rate = 90,
.val = 5,
.flags = IEEE80211_RATE_OFDM },
{ .rate = 120,
.val = 6,
.flags = IEEE80211_RATE_OFDM },
{ .rate = 180,
.val = 7,
.flags = IEEE80211_RATE_OFDM },
{ .rate = 240,
.val = 8,
.flags = IEEE80211_RATE_OFDM },
{ .rate = 360,
.val = 9,
.flags = IEEE80211_RATE_OFDM },
{ .rate = 480,
.val = 10,
.flags = IEEE80211_RATE_OFDM },
{ .rate = 540,
.val = 11,
.flags = IEEE80211_RATE_OFDM },
};
static const struct ieee80211_channel rtl818x_channels[] = {
{ .chan = 1,
.freq = 2412},
{ .chan = 2,
.freq = 2417},
{ .chan = 3,
.freq = 2422},
{ .chan = 4,
.freq = 2427},
{ .chan = 5,
.freq = 2432},
{ .chan = 6,
.freq = 2437},
{ .chan = 7,
.freq = 2442},
{ .chan = 8,
.freq = 2447},
{ .chan = 9,
.freq = 2452},
{ .chan = 10,
.freq = 2457},
{ .chan = 11,
.freq = 2462},
{ .chan = 12,
.freq = 2467},
{ .chan = 13,
.freq = 2472},
{ .chan = 14,
.freq = 2484}
};
#endif /* RTL818X_H */