iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ath10k: make warm reset a bit safer and faster

Browse Source 
One of the problems with warm reset I've found is
that it must be guaranteed that copy engine
registers are not being accessed while being
reset. Otherwise in worst case scenario the host
may lock up.

Instead of using sleeps and hoping the device is
operational in some arbitrary timeframes use
firmware indication register.

As a side effect this makes driver
boot/stop/recovery faster.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
This commit is contained in:
Michal Kazior 2014-10-28 10:32:06 +01:00 committed by Kalle Valo
parent 099ac7ce2e
commit 61c1648bd7
1 changed files with 53 additions and 67 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

120
drivers/net/wireless/ath/ath10k/pci.c
View File

@ -1717,89 +1717,75 @@ static void ath10k_pci_warm_reset_si0(struct ath10k *ar)
msleep(10);
}
static int ath10k_pci_warm_reset(struct ath10k *ar)
static void ath10k_pci_warm_reset_cpu(struct ath10k *ar)
{
u32 val;
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot warm reset\n");
spin_lock_bh(&ar->data_lock);
ar->stats.fw_warm_reset_counter++;
spin_unlock_bh(&ar->data_lock);
/* debug */
val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
PCIE_INTR_CAUSE_ADDRESS);
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot host cpu intr cause: 0x%08x\n",
val);
val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
CPU_INTR_ADDRESS);
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot target cpu intr cause: 0x%08x\n",
val);
/* disable pending irqs */
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
PCIE_INTR_ENABLE_ADDRESS, 0);
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
PCIE_INTR_CLR_ADDRESS, ~0);
msleep(100);
/* clear fw indicator */
ath10k_pci_write32(ar, FW_INDICATOR_ADDRESS, 0);
/* clear target LF timer interrupts */
val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
SOC_RESET_CONTROL_ADDRESS);
ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS,
val | SOC_RESET_CONTROL_CPU_WARM_RST_MASK);
}
static void ath10k_pci_warm_reset_ce(struct ath10k *ar)
{
u32 val;
val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
SOC_RESET_CONTROL_ADDRESS);
ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS,
val | SOC_RESET_CONTROL_CE_RST_MASK);
msleep(10);
ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS,
val & ~SOC_RESET_CONTROL_CE_RST_MASK);
}
static void ath10k_pci_warm_reset_clear_lf(struct ath10k *ar)
{
u32 val;
val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
SOC_LF_TIMER_CONTROL0_ADDRESS);
ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS +
SOC_LF_TIMER_CONTROL0_ADDRESS,
val & ~SOC_LF_TIMER_CONTROL0_ENABLE_MASK);
}
/* reset CE */
val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
SOC_RESET_CONTROL_ADDRESS);
ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS,
val | SOC_RESET_CONTROL_CE_RST_MASK);
val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
SOC_RESET_CONTROL_ADDRESS);
msleep(10);
static int ath10k_pci_warm_reset(struct ath10k *ar)
{
int ret;
/* unreset CE */
ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS,
val & ~SOC_RESET_CONTROL_CE_RST_MASK);
val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
SOC_RESET_CONTROL_ADDRESS);
msleep(10);
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot warm reset\n");
spin_lock_bh(&ar->data_lock);
ar->stats.fw_warm_reset_counter++;
spin_unlock_bh(&ar->data_lock);
ath10k_pci_irq_disable(ar);
/* Make sure the target CPU is not doing anything dangerous, e.g. if it
* were to access copy engine while host performs copy engine reset
* then it is possible for the device to confuse pci-e controller to
* the point of bringing host system to a complete stop (i.e. hang).
*/
ath10k_pci_warm_reset_si0(ar);
ath10k_pci_warm_reset_cpu(ar);
ath10k_pci_init_pipes(ar);
ath10k_pci_wait_for_target_init(ar);
/* debug */
val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
PCIE_INTR_CAUSE_ADDRESS);
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot host cpu intr cause: 0x%08x\n",
val);
ath10k_pci_warm_reset_clear_lf(ar);
ath10k_pci_warm_reset_ce(ar);
ath10k_pci_warm_reset_cpu(ar);
ath10k_pci_init_pipes(ar);
val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
CPU_INTR_ADDRESS);
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot target cpu intr cause: 0x%08x\n",
val);
/* CPU warm reset */
val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
SOC_RESET_CONTROL_ADDRESS);
ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS,
val | SOC_RESET_CONTROL_CPU_WARM_RST_MASK);
val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
SOC_RESET_CONTROL_ADDRESS);
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot target reset state: 0x%08x\n",
val);
msleep(100);
ret = ath10k_pci_wait_for_target_init(ar);
if (ret) {
ath10k_warn(ar, "failed to wait for target init: %d\n", ret);
return ret;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot warm reset complete\n");