iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding

Browse Source 
For most devices the FIFO configuration is the same i.e. when half FIFO size is
available/filled, a source/destination request is serviced. But USART devices
have to do it when there is enough space/data available to perform a single
AHB access so the ASAP configuration.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
This commit is contained in:
Ludovic Desroches 2013-06-13 10:39:39 +02:00 committed by Vinod Koul
parent 764037c6f5
commit 62971b2982
2 changed files with 26 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
Documentation/devicetree/bindings/dma/atmel-dma.txt
View File

@ -24,8 +24,11 @@ The three cells in order are:
1. A phandle pointing to the DMA controller.
2. The memory interface (16 most significant bits), the peripheral interface
(16 less significant bits).
3. The peripheral identifier for the hardware handshaking interface. The
identifier can be different for tx and rx.
3. Parameters for the at91 DMA configuration register which are device
dependant:
- bit 7-0: peripheral identifier for the hardware handshaking interface. The
identifier can be different for tx and rx.
- bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP.
Example:

25
drivers/dma/at_hdmac.c
View File

@ -14,6 +14,7 @@
* found on AT91SAM9263.
*/
#include <dt-bindings/dma/at91.h>
#include <linux/clk.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
@ -1320,15 +1321,31 @@ static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec,
atslave = devm_kzalloc(&dmac_pdev->dev, sizeof(*atslave), GFP_KERNEL);
if (!atslave)
return NULL;
atslave->cfg = ATC_DST_H2SEL_HW | ATC_SRC_H2SEL_HW;
/*
* We can fill both SRC_PER and DST_PER, one of these fields will be
* ignored depending on DMA transfer direction.
*/
per_id = dma_spec->args[1];
atslave->cfg = ATC_FIFOCFG_HALFFIFO
| ATC_DST_H2SEL_HW | ATC_SRC_H2SEL_HW
| ATC_DST_PER_MSB(per_id) | ATC_DST_PER(per_id)
per_id = dma_spec->args[1] & AT91_DMA_CFG_PER_ID_MASK;
atslave->cfg |= ATC_DST_PER_MSB(per_id) | ATC_DST_PER(per_id)
| ATC_SRC_PER_MSB(per_id) | ATC_SRC_PER(per_id);
/*
* We have to translate the value we get from the device tree since
* the half FIFO configuration value had to be 0 to keep backward
* compatibility.
*/
switch (dma_spec->args[1] & AT91_DMA_CFG_FIFOCFG_MASK) {
case AT91_DMA_CFG_FIFOCFG_ALAP:
atslave->cfg |= ATC_FIFOCFG_LARGESTBURST;
break;
case AT91_DMA_CFG_FIFOCFG_ASAP:
atslave->cfg |= ATC_FIFOCFG_ENOUGHSPACE;
break;
case AT91_DMA_CFG_FIFOCFG_HALF:
default:
atslave->cfg |= ATC_FIFOCFG_HALFFIFO;
}
atslave->dma_dev = &dmac_pdev->dev;
chan = dma_request_channel(mask, at_dma_filter, atslave);