regulator: mpq7920: add mpq7920 regulator driver
Adding regulator driver for the device mpq7920. The MPQ7920 PMIC device contains four DC-DC buck converters and five regulators, is designed for automotive and accessed over I2C. Fixed sparse warning reported on this patch Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Link: https://lore.kernel.org/r/20200109195346.30270-1-sravanhome@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Saravanan Sekar
Mark Brown
parent
c5bae95b4e
commit
6501c1f54a
@ -623,6 +623,16 @@ config REGULATOR_MP8859
|
||||
Say M here if you want to include support for the regulator as a
|
||||
module. The module will be named "mp8859".
|
||||
|
||||
config REGULATOR_MPQ7920
|
||||
tristate "Monolithic MPQ7920 PMIC"
|
||||
depends on I2C && OF
|
||||
select REGMAP_I2C
|
||||
help
|
||||
Say y here to support the MPQ7920 PMIC. This will enable supports
|
||||
the software controllable 4 buck and 5 LDO regulators.
|
||||
This driver supports the control of different power rails of device
|
||||
through regulator interface.
|
||||
|
||||
config REGULATOR_MT6311
|
||||
tristate "MediaTek MT6311 PMIC"
|
||||
depends on I2C
|
||||
|
||||
@ -79,6 +79,7 @@ obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
|
||||
obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o
|
||||
obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o
|
||||
obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
|
||||
obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o
|
||||
|
||||
346
drivers/regulator/mpq7920.c
Normal file
346
drivers/regulator/mpq7920.c
Normal file
@ -0,0 +1,346 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
//
|
||||
// mpq7920.c - regulator driver for mps mpq7920
|
||||
//
|
||||
// Copyright 2019 Monolithic Power Systems, Inc
|
||||
//
|
||||
// Author: Saravanan Sekar <sravanhome@gmail.com>
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/regmap.h>
|
||||
#include "mpq7920.h"
|
||||
|
||||
#define MPQ7920_BUCK_VOLT_RANGE \
|
||||
((MPQ7920_VOLT_MAX - MPQ7920_BUCK_VOLT_MIN)/MPQ7920_VOLT_STEP + 1)
|
||||
#define MPQ7920_LDO_VOLT_RANGE \
|
||||
((MPQ7920_VOLT_MAX - MPQ7920_LDO_VOLT_MIN)/MPQ7920_VOLT_STEP + 1)
|
||||
|
||||
#define MPQ7920BUCK(_name, _id, _ilim) \
|
||||
[MPQ7920_BUCK ## _id] = { \
|
||||
.id = MPQ7920_BUCK ## _id, \
|
||||
.name = _name, \
|
||||
.of_match = _name, \
|
||||
.regulators_node = "regulators", \
|
||||
.of_parse_cb = mpq7920_parse_cb, \
|
||||
.ops = &mpq7920_buck_ops, \
|
||||
.min_uV = MPQ7920_BUCK_VOLT_MIN, \
|
||||
.uV_step = MPQ7920_VOLT_STEP, \
|
||||
.n_voltages = MPQ7920_BUCK_VOLT_RANGE, \
|
||||
.curr_table = _ilim, \
|
||||
.n_current_limits = ARRAY_SIZE(_ilim), \
|
||||
.csel_reg = MPQ7920_BUCK ##_id## _REG_C, \
|
||||
.csel_mask = MPQ7920_MASK_BUCK_ILIM, \
|
||||
.enable_reg = MPQ7920_REG_REGULATOR_EN, \
|
||||
.enable_mask = BIT(MPQ7920_REGULATOR_EN_OFFSET - \
|
||||
MPQ7920_BUCK ## _id), \
|
||||
.vsel_reg = MPQ7920_BUCK ##_id## _REG_A, \
|
||||
.vsel_mask = MPQ7920_MASK_VREF, \
|
||||
.active_discharge_on = MPQ7920_DISCHARGE_ON, \
|
||||
.active_discharge_reg = MPQ7920_BUCK ##_id## _REG_B, \
|
||||
.active_discharge_mask = MPQ7920_MASK_DISCHARGE, \
|
||||
.soft_start_reg = MPQ7920_BUCK ##_id## _REG_C, \
|
||||
.soft_start_mask = MPQ7920_MASK_SOFTSTART, \
|
||||
.owner = THIS_MODULE, \
|
||||
}
|
||||
|
||||
#define MPQ7920LDO(_name, _id, _ops, _ilim, _ilim_sz, _creg, _cmask) \
|
||||
[MPQ7920_LDO ## _id] = { \
|
||||
.id = MPQ7920_LDO ## _id, \
|
||||
.name = _name, \
|
||||
.of_match = _name, \
|
||||
.regulators_node = "regulators", \
|
||||
.ops = _ops, \
|
||||
.min_uV = MPQ7920_LDO_VOLT_MIN, \
|
||||
.uV_step = MPQ7920_VOLT_STEP, \
|
||||
.n_voltages = MPQ7920_LDO_VOLT_RANGE, \
|
||||
.vsel_reg = MPQ7920_LDO ##_id## _REG_A, \
|
||||
.vsel_mask = MPQ7920_MASK_VREF, \
|
||||
.curr_table = _ilim, \
|
||||
.n_current_limits = _ilim_sz, \
|
||||
.csel_reg = _creg, \
|
||||
.csel_mask = _cmask, \
|
||||
.enable_reg = (_id == 1) ? 0 : MPQ7920_REG_REGULATOR_EN,\
|
||||
.enable_mask = BIT(MPQ7920_REGULATOR_EN_OFFSET - \
|
||||
MPQ7920_LDO ##_id + 1), \
|
||||
.active_discharge_on = MPQ7920_DISCHARGE_ON, \
|
||||
.active_discharge_mask = MPQ7920_MASK_DISCHARGE, \
|
||||
.active_discharge_reg = MPQ7920_LDO ##_id## _REG_B, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.owner = THIS_MODULE, \
|
||||
}
|
||||
|
||||
enum mpq7920_regulators {
|
||||
MPQ7920_BUCK1,
|
||||
MPQ7920_BUCK2,
|
||||
MPQ7920_BUCK3,
|
||||
MPQ7920_BUCK4,
|
||||
MPQ7920_LDO1, /* LDORTC */
|
||||
MPQ7920_LDO2,
|
||||
MPQ7920_LDO3,
|
||||
MPQ7920_LDO4,
|
||||
MPQ7920_LDO5,
|
||||
MPQ7920_MAX_REGULATORS,
|
||||
};
|
||||
|
||||
struct mpq7920_regulator_info {
|
||||
struct device *dev;
|
||||
struct regmap *regmap;
|
||||
struct regulator_dev *rdev[MPQ7920_MAX_REGULATORS];
|
||||
struct regulator_desc *rdesc;
|
||||
};
|
||||
|
||||
static const struct regmap_config mpq7920_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.max_register = 0x25,
|
||||
};
|
||||
|
||||
/* Current limits array (in uA)
|
||||
* ILIM1 & ILIM3
|
||||
*/
|
||||
static const unsigned int mpq7920_I_limits1[] = {
|
||||
4600000, 6600000, 7600000, 9300000
|
||||
};
|
||||
|
||||
/* ILIM2 & ILIM4 */
|
||||
static const unsigned int mpq7920_I_limits2[] = {
|
||||
2700000, 3900000, 5100000, 6100000
|
||||
};
|
||||
|
||||
/* LDO4 & LDO5 */
|
||||
static const unsigned int mpq7920_I_limits3[] = {
|
||||
300000, 700000
|
||||
};
|
||||
|
||||
static int mpq7920_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay);
|
||||
static int mpq7920_parse_cb(struct device_node *np,
|
||||
const struct regulator_desc *rdesc,
|
||||
struct regulator_config *config);
|
||||
|
||||
/* RTCLDO not controllable, always ON */
|
||||
static const struct regulator_ops mpq7920_ldortc_ops = {
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.map_voltage = regulator_map_voltage_linear,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
};
|
||||
|
||||
static const struct regulator_ops mpq7920_ldo_wo_current_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.map_voltage = regulator_map_voltage_linear,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.set_active_discharge = regulator_set_active_discharge_regmap,
|
||||
};
|
||||
|
||||
static const struct regulator_ops mpq7920_ldo_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.map_voltage = regulator_map_voltage_linear,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.set_active_discharge = regulator_set_active_discharge_regmap,
|
||||
.get_current_limit = regulator_get_current_limit_regmap,
|
||||
.set_current_limit = regulator_set_current_limit_regmap,
|
||||
};
|
||||
|
||||
static const struct regulator_ops mpq7920_buck_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.map_voltage = regulator_map_voltage_linear,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.set_active_discharge = regulator_set_active_discharge_regmap,
|
||||
.set_soft_start = regulator_set_soft_start_regmap,
|
||||
.set_ramp_delay = mpq7920_set_ramp_delay,
|
||||
};
|
||||
|
||||
static struct regulator_desc mpq7920_regulators_desc[MPQ7920_MAX_REGULATORS] = {
|
||||
MPQ7920BUCK("buck1", 1, mpq7920_I_limits1),
|
||||
MPQ7920BUCK("buck2", 2, mpq7920_I_limits2),
|
||||
MPQ7920BUCK("buck3", 3, mpq7920_I_limits1),
|
||||
MPQ7920BUCK("buck4", 4, mpq7920_I_limits2),
|
||||
MPQ7920LDO("ldortc", 1, &mpq7920_ldortc_ops, NULL, 0, 0, 0),
|
||||
MPQ7920LDO("ldo2", 2, &mpq7920_ldo_wo_current_ops, NULL, 0, 0, 0),
|
||||
MPQ7920LDO("ldo3", 3, &mpq7920_ldo_wo_current_ops, NULL, 0, 0, 0),
|
||||
MPQ7920LDO("ldo4", 4, &mpq7920_ldo_ops, mpq7920_I_limits3,
|
||||
ARRAY_SIZE(mpq7920_I_limits3), MPQ7920_LDO4_REG_B,
|
||||
MPQ7920_MASK_LDO_ILIM),
|
||||
MPQ7920LDO("ldo5", 5, &mpq7920_ldo_ops, mpq7920_I_limits3,
|
||||
ARRAY_SIZE(mpq7920_I_limits3), MPQ7920_LDO5_REG_B,
|
||||
MPQ7920_MASK_LDO_ILIM),
|
||||
};
|
||||
|
||||
/*
|
||||
* DVS ramp rate BUCK1 to BUCK4
|
||||
* 00-01: Reserved
|
||||
* 10: 8mV/us
|
||||
* 11: 4mV/us
|
||||
*/
|
||||
static int mpq7920_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
|
||||
{
|
||||
unsigned int ramp_val;
|
||||
|
||||
if (ramp_delay > 8000 || ramp_delay < 0)
|
||||
return -EINVAL;
|
||||
|
||||
if (ramp_delay <= 4000)
|
||||
ramp_val = 3;
|
||||
else
|
||||
ramp_val = 2;
|
||||
|
||||
return regmap_update_bits(rdev->regmap, MPQ7920_REG_CTL0,
|
||||
MPQ7920_MASK_DVS_SLEWRATE, ramp_val << 6);
|
||||
}
|
||||
|
||||
static int mpq7920_parse_cb(struct device_node *np,
|
||||
const struct regulator_desc *desc,
|
||||
struct regulator_config *config)
|
||||
{
|
||||
uint8_t val;
|
||||
int ret;
|
||||
struct mpq7920_regulator_info *info = config->driver_data;
|
||||
struct regulator_desc *rdesc = &info->rdesc[desc->id];
|
||||
|
||||
if (of_property_read_bool(np, "mps,buck-ovp-disable")) {
|
||||
regmap_update_bits(config->regmap,
|
||||
MPQ7920_BUCK1_REG_B + (rdesc->id * 4),
|
||||
BIT(6), ~BIT(6));
|
||||
}
|
||||
|
||||
ret = of_property_read_u8(np, "mps,buck-phase-delay", &val);
|
||||
if (!ret) {
|
||||
regmap_update_bits(config->regmap,
|
||||
MPQ7920_BUCK1_REG_C + (rdesc->id * 4),
|
||||
MPQ7920_MASK_BUCK_PHASE_DEALY,
|
||||
(val & 3) << 4);
|
||||
}
|
||||
|
||||
ret = of_property_read_u8(np, "mps,buck-softstart", &val);
|
||||
if (!ret)
|
||||
rdesc->soft_start_val_on = (val & 3) << 2;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void mpq7920_parse_dt(struct device *dev,
|
||||
struct mpq7920_regulator_info *info)
|
||||
{
|
||||
int ret;
|
||||
struct device_node *np = dev->of_node;
|
||||
uint8_t freq;
|
||||
|
||||
np = of_get_child_by_name(np, "regulators");
|
||||
if (!np) {
|
||||
dev_err(dev, "missing 'regulators' subnode in DT\n");
|
||||
return;
|
||||
}
|
||||
|
||||
ret = of_property_read_u8(np, "mps,switch-freq", &freq);
|
||||
if (!ret) {
|
||||
regmap_update_bits(info->regmap, MPQ7920_REG_CTL0,
|
||||
MPQ7920_MASK_SWITCH_FREQ,
|
||||
(freq & 3) << 4);
|
||||
}
|
||||
|
||||
of_node_put(np);
|
||||
}
|
||||
|
||||
static inline int mpq7920_regulator_register(
|
||||
struct mpq7920_regulator_info *info,
|
||||
struct regulator_config *config)
|
||||
{
|
||||
int i;
|
||||
struct regulator_desc *rdesc;
|
||||
|
||||
for (i = 0; i < MPQ7920_MAX_REGULATORS; i++) {
|
||||
rdesc = &info->rdesc[i];
|
||||
|
||||
info->rdev[i] = devm_regulator_register(info->dev, rdesc,
|
||||
config);
|
||||
if (IS_ERR(info->rdev))
|
||||
return PTR_ERR(info->rdev);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mpq7920_i2c_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct device *dev = &client->dev;
|
||||
struct mpq7920_regulator_info *info;
|
||||
struct regulator_config config = { NULL, };
|
||||
struct regmap *regmap;
|
||||
int ret;
|
||||
|
||||
info = devm_kzalloc(dev, sizeof(struct mpq7920_regulator_info),
|
||||
GFP_KERNEL);
|
||||
if (!info)
|
||||
return -ENOMEM;
|
||||
|
||||
info->dev = dev;
|
||||
info->rdesc = mpq7920_regulators_desc;
|
||||
regmap = devm_regmap_init_i2c(client, &mpq7920_regmap_config);
|
||||
if (IS_ERR(regmap)) {
|
||||
dev_err(dev, "Failed to allocate regmap!\n");
|
||||
return PTR_ERR(regmap);
|
||||
}
|
||||
|
||||
i2c_set_clientdata(client, info);
|
||||
info->regmap = regmap;
|
||||
if (client->dev.of_node)
|
||||
mpq7920_parse_dt(&client->dev, info);
|
||||
|
||||
config.dev = info->dev;
|
||||
config.regmap = regmap;
|
||||
config.driver_data = info;
|
||||
|
||||
ret = mpq7920_regulator_register(info, &config);
|
||||
if (ret < 0)
|
||||
dev_err(dev, "Failed to register regulator!\n");
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct of_device_id mpq7920_of_match[] = {
|
||||
{ .compatible = "mps,mpq7920"},
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, mpq7920_of_match);
|
||||
|
||||
static const struct i2c_device_id mpq7920_id[] = {
|
||||
{ "mpq7920", },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, mpq7920_id);
|
||||
|
||||
static struct i2c_driver mpq7920_regulator_driver = {
|
||||
.driver = {
|
||||
.name = "mpq7920",
|
||||
.of_match_table = of_match_ptr(mpq7920_of_match),
|
||||
},
|
||||
.probe = mpq7920_i2c_probe,
|
||||
.id_table = mpq7920_id,
|
||||
};
|
||||
module_i2c_driver(mpq7920_regulator_driver);
|
||||
|
||||
MODULE_AUTHOR("Saravanan Sekar <sravanhome@gmail.com>");
|
||||
MODULE_DESCRIPTION("MPQ7920 PMIC regulator driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
68
drivers/regulator/mpq7920.h
Normal file
68
drivers/regulator/mpq7920.h
Normal file
@ -0,0 +1,68 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* mpq7920.h - Regulator definitions for mpq7920
|
||||
*
|
||||
* Copyright 2019 Monolithic Power Systems, Inc
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef __MPQ7920_H__
|
||||
#define __MPQ7920_H__
|
||||
|
||||
#define MPQ7920_REG_CTL0 0x00
|
||||
#define MPQ7920_REG_CTL1 0x01
|
||||
#define MPQ7920_REG_CTL2 0x02
|
||||
#define MPQ7920_BUCK1_REG_A 0x03
|
||||
#define MPQ7920_BUCK1_REG_B 0x04
|
||||
#define MPQ7920_BUCK1_REG_C 0x05
|
||||
#define MPQ7920_BUCK1_REG_D 0x06
|
||||
#define MPQ7920_BUCK2_REG_A 0x07
|
||||
#define MPQ7920_BUCK2_REG_B 0x08
|
||||
#define MPQ7920_BUCK2_REG_C 0x09
|
||||
#define MPQ7920_BUCK2_REG_D 0x0a
|
||||
#define MPQ7920_BUCK3_REG_A 0x0b
|
||||
#define MPQ7920_BUCK3_REG_B 0x0c
|
||||
#define MPQ7920_BUCK3_REG_C 0x0d
|
||||
#define MPQ7920_BUCK3_REG_D 0x0e
|
||||
#define MPQ7920_BUCK4_REG_A 0x0f
|
||||
#define MPQ7920_BUCK4_REG_B 0x10
|
||||
#define MPQ7920_BUCK4_REG_C 0x11
|
||||
#define MPQ7920_BUCK4_REG_D 0x12
|
||||
#define MPQ7920_LDO1_REG_A 0x13
|
||||
#define MPQ7920_LDO1_REG_B 0x0
|
||||
#define MPQ7920_LDO2_REG_A 0x14
|
||||
#define MPQ7920_LDO2_REG_B 0x15
|
||||
#define MPQ7920_LDO2_REG_C 0x16
|
||||
#define MPQ7920_LDO3_REG_A 0x17
|
||||
#define MPQ7920_LDO3_REG_B 0x18
|
||||
#define MPQ7920_LDO3_REG_C 0x19
|
||||
#define MPQ7920_LDO4_REG_A 0x1a
|
||||
#define MPQ7920_LDO4_REG_B 0x1b
|
||||
#define MPQ7920_LDO4_REG_C 0x1c
|
||||
#define MPQ7920_LDO5_REG_A 0x1d
|
||||
#define MPQ7920_LDO5_REG_B 0x1e
|
||||
#define MPQ7920_LDO5_REG_C 0x1f
|
||||
#define MPQ7920_REG_MODE 0x20
|
||||
#define MPQ7920_REG_REGULATOR_EN1 0x22
|
||||
#define MPQ7920_REG_REGULATOR_EN 0x22
|
||||
|
||||
#define MPQ7920_MASK_VREF 0x7f
|
||||
#define MPQ7920_MASK_BUCK_ILIM 0xd0
|
||||
#define MPQ7920_MASK_LDO_ILIM BIT(6)
|
||||
#define MPQ7920_MASK_DISCHARGE BIT(5)
|
||||
#define MPQ7920_MASK_MODE 0xc0
|
||||
#define MPQ7920_MASK_SOFTSTART 0x0c
|
||||
#define MPQ7920_MASK_SWITCH_FREQ 0x30
|
||||
#define MPQ7920_MASK_BUCK_PHASE_DEALY 0x30
|
||||
#define MPQ7920_MASK_DVS_SLEWRATE 0xc0
|
||||
#define MPQ7920_DISCHARGE_ON 0x1
|
||||
|
||||
#define MPQ7920_REGULATOR_EN_OFFSET 7
|
||||
|
||||
/* values in mV */
|
||||
#define MPQ7920_BUCK_VOLT_MIN 400000
|
||||
#define MPQ7920_LDO_VOLT_MIN 650000
|
||||
#define MPQ7920_VOLT_MAX 3587500
|
||||
#define MPQ7920_VOLT_STEP 12500
|
||||
|
||||
#endif /* __MPQ7920_H__ */
|
||||
Loading…
Reference in New Issue
Block a user