mtd: rawnand: Rework of_get_nand_bus_width()

of_get_nand_bus_width() had a wrong behavior because:
1/ it ignored the -ENODATA and -EOVERFLOW return values of
   of_property_read_u32(). "nand-bus-width" without value was tolerated
   while it shouldn't have been according to the devicetree bindings.
2/ returned -EIO when the nand-bus-width was neither 8 nor 16, when it
   should have returned -EINVAL instead.
3/ returned the 8 or 16 bus-width integer, but it was never used it its
   caller. A simply return 0 on success is enough.
Rework of_get_nand_bus_width() and address all the above. The execution
is now stopped in case of errors.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220106131610.225661-2-tudor.ambarus@microchip.com
This commit is contained in:
Tudor Ambarus 2022-01-06 15:16:10 +02:00 committed by Miquel Raynal
parent dbfbe79dbb
commit 65a01be4f5

View File

@ -5274,20 +5274,24 @@ static void of_get_nand_ecc_legacy_user_config(struct nand_chip *chip)
user_conf->placement = of_get_rawnand_ecc_placement_legacy(dn);
}
static int of_get_nand_bus_width(struct device_node *np)
static int of_get_nand_bus_width(struct nand_chip *chip)
{
struct device_node *dn = nand_get_flash_node(chip);
u32 val;
int ret;
if (of_property_read_u32(np, "nand-bus-width", &val))
return 8;
ret = of_property_read_u32(dn, "nand-bus-width", &val);
if (ret == -EINVAL)
/* Buswidth defaults to 8 if the property does not exist .*/
return 0;
else if (ret)
return ret;
switch (val) {
case 8:
case 16:
return val;
default:
return -EIO;
}
if (val == 16)
chip->options |= NAND_BUSWIDTH_16;
else if (val != 8)
return -EINVAL;
return 0;
}
static int of_get_nand_secure_regions(struct nand_chip *chip)
@ -5363,12 +5367,14 @@ static int rawnand_dt_init(struct nand_chip *chip)
{
struct nand_device *nand = mtd_to_nanddev(nand_to_mtd(chip));
struct device_node *dn = nand_get_flash_node(chip);
int ret;
if (!dn)
return 0;
if (of_get_nand_bus_width(dn) == 16)
chip->options |= NAND_BUSWIDTH_16;
ret = of_get_nand_bus_width(chip);
if (ret)
return ret;
if (of_property_read_bool(dn, "nand-is-boot-medium"))
chip->options |= NAND_IS_BOOT_MEDIUM;