firmware: ti_sci: Add resource management APIs for ringacc, psi-l and udma
Configuration of NAVSS resource, like rings, UDMAP channels, flows and PSI-L thread management need to be done via TISCI. Add the needed structures and functions for NAVSS resource configuration of the following: Rings from Ring Accelerator PSI-L thread management UDMAP tchan, rchan and rflow configuration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
This commit is contained in:
Peter Ujfalusi
Santosh Shilimkar
parent
66f030eac2
commit
68608b5e50
@ -2004,6 +2004,481 @@ static int ti_sci_cmd_free_event_map(const struct ti_sci_handle *handle,
|
||||
ia_id, vint, global_event, vint_status_bit, 0);
|
||||
}
|
||||
|
||||
/**
|
||||
* ti_sci_cmd_ring_config() - configure RA ring
|
||||
* @handle: Pointer to TI SCI handle.
|
||||
* @valid_params: Bitfield defining validity of ring configuration
|
||||
* parameters
|
||||
* @nav_id: Device ID of Navigator Subsystem from which the ring is
|
||||
* allocated
|
||||
* @index: Ring index
|
||||
* @addr_lo: The ring base address lo 32 bits
|
||||
* @addr_hi: The ring base address hi 32 bits
|
||||
* @count: Number of ring elements
|
||||
* @mode: The mode of the ring
|
||||
* @size: The ring element size.
|
||||
* @order_id: Specifies the ring's bus order ID
|
||||
*
|
||||
* Return: 0 if all went well, else returns appropriate error value.
|
||||
*
|
||||
* See @ti_sci_msg_rm_ring_cfg_req for more info.
|
||||
*/
|
||||
static int ti_sci_cmd_ring_config(const struct ti_sci_handle *handle,
|
||||
u32 valid_params, u16 nav_id, u16 index,
|
||||
u32 addr_lo, u32 addr_hi, u32 count,
|
||||
u8 mode, u8 size, u8 order_id)
|
||||
{
|
||||
struct ti_sci_msg_rm_ring_cfg_req *req;
|
||||
struct ti_sci_msg_hdr *resp;
|
||||
struct ti_sci_xfer *xfer;
|
||||
struct ti_sci_info *info;
|
||||
struct device *dev;
|
||||
int ret = 0;
|
||||
|
||||
if (IS_ERR_OR_NULL(handle))
|
||||
return -EINVAL;
|
||||
|
||||
info = handle_to_ti_sci_info(handle);
|
||||
dev = info->dev;
|
||||
|
||||
xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_RM_RING_CFG,
|
||||
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
|
||||
sizeof(*req), sizeof(*resp));
|
||||
if (IS_ERR(xfer)) {
|
||||
ret = PTR_ERR(xfer);
|
||||
dev_err(info->dev, "RM_RA:Message config failed(%d)\n", ret);
|
||||
return ret;
|
||||
}
|
||||
req = (struct ti_sci_msg_rm_ring_cfg_req *)xfer->xfer_buf;
|
||||
req->valid_params = valid_params;
|
||||
req->nav_id = nav_id;
|
||||
req->index = index;
|
||||
req->addr_lo = addr_lo;
|
||||
req->addr_hi = addr_hi;
|
||||
req->count = count;
|
||||
req->mode = mode;
|
||||
req->size = size;
|
||||
req->order_id = order_id;
|
||||
|
||||
ret = ti_sci_do_xfer(info, xfer);
|
||||
if (ret) {
|
||||
dev_err(info->dev, "RM_RA:Mbox config send fail %d\n", ret);
|
||||
goto fail;
|
||||
}
|
||||
|
||||
resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
|
||||
ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
|
||||
|
||||
fail:
|
||||
ti_sci_put_one_xfer(&info->minfo, xfer);
|
||||
dev_dbg(info->dev, "RM_RA:config ring %u ret:%d\n", index, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* ti_sci_cmd_ring_get_config() - get RA ring configuration
|
||||
* @handle: Pointer to TI SCI handle.
|
||||
* @nav_id: Device ID of Navigator Subsystem from which the ring is
|
||||
* allocated
|
||||
* @index: Ring index
|
||||
* @addr_lo: Returns ring's base address lo 32 bits
|
||||
* @addr_hi: Returns ring's base address hi 32 bits
|
||||
* @count: Returns number of ring elements
|
||||
* @mode: Returns mode of the ring
|
||||
* @size: Returns ring element size
|
||||
* @order_id: Returns ring's bus order ID
|
||||
*
|
||||
* Return: 0 if all went well, else returns appropriate error value.
|
||||
*
|
||||
* See @ti_sci_msg_rm_ring_get_cfg_req for more info.
|
||||
*/
|
||||
static int ti_sci_cmd_ring_get_config(const struct ti_sci_handle *handle,
|
||||
u32 nav_id, u32 index, u8 *mode,
|
||||
u32 *addr_lo, u32 *addr_hi,
|
||||
u32 *count, u8 *size, u8 *order_id)
|
||||
{
|
||||
struct ti_sci_msg_rm_ring_get_cfg_resp *resp;
|
||||
struct ti_sci_msg_rm_ring_get_cfg_req *req;
|
||||
struct ti_sci_xfer *xfer;
|
||||
struct ti_sci_info *info;
|
||||
struct device *dev;
|
||||
int ret = 0;
|
||||
|
||||
if (IS_ERR_OR_NULL(handle))
|
||||
return -EINVAL;
|
||||
|
||||
info = handle_to_ti_sci_info(handle);
|
||||
dev = info->dev;
|
||||
|
||||
xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_RM_RING_GET_CFG,
|
||||
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
|
||||
sizeof(*req), sizeof(*resp));
|
||||
if (IS_ERR(xfer)) {
|
||||
ret = PTR_ERR(xfer);
|
||||
dev_err(info->dev,
|
||||
"RM_RA:Message get config failed(%d)\n", ret);
|
||||
return ret;
|
||||
}
|
||||
req = (struct ti_sci_msg_rm_ring_get_cfg_req *)xfer->xfer_buf;
|
||||
req->nav_id = nav_id;
|
||||
req->index = index;
|
||||
|
||||
ret = ti_sci_do_xfer(info, xfer);
|
||||
if (ret) {
|
||||
dev_err(info->dev, "RM_RA:Mbox get config send fail %d\n", ret);
|
||||
goto fail;
|
||||
}
|
||||
|
||||
resp = (struct ti_sci_msg_rm_ring_get_cfg_resp *)xfer->xfer_buf;
|
||||
|
||||
if (!ti_sci_is_response_ack(resp)) {
|
||||
ret = -ENODEV;
|
||||
} else {
|
||||
if (mode)
|
||||
*mode = resp->mode;
|
||||
if (addr_lo)
|
||||
*addr_lo = resp->addr_lo;
|
||||
if (addr_hi)
|
||||
*addr_hi = resp->addr_hi;
|
||||
if (count)
|
||||
*count = resp->count;
|
||||
if (size)
|
||||
*size = resp->size;
|
||||
if (order_id)
|
||||
*order_id = resp->order_id;
|
||||
};
|
||||
|
||||
fail:
|
||||
ti_sci_put_one_xfer(&info->minfo, xfer);
|
||||
dev_dbg(info->dev, "RM_RA:get config ring %u ret:%d\n", index, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* ti_sci_cmd_rm_psil_pair() - Pair PSI-L source to destination thread
|
||||
* @handle: Pointer to TI SCI handle.
|
||||
* @nav_id: Device ID of Navigator Subsystem which should be used for
|
||||
* pairing
|
||||
* @src_thread: Source PSI-L thread ID
|
||||
* @dst_thread: Destination PSI-L thread ID
|
||||
*
|
||||
* Return: 0 if all went well, else returns appropriate error value.
|
||||
*/
|
||||
static int ti_sci_cmd_rm_psil_pair(const struct ti_sci_handle *handle,
|
||||
u32 nav_id, u32 src_thread, u32 dst_thread)
|
||||
{
|
||||
struct ti_sci_msg_psil_pair *req;
|
||||
struct ti_sci_msg_hdr *resp;
|
||||
struct ti_sci_xfer *xfer;
|
||||
struct ti_sci_info *info;
|
||||
struct device *dev;
|
||||
int ret = 0;
|
||||
|
||||
if (IS_ERR(handle))
|
||||
return PTR_ERR(handle);
|
||||
if (!handle)
|
||||
return -EINVAL;
|
||||
|
||||
info = handle_to_ti_sci_info(handle);
|
||||
dev = info->dev;
|
||||
|
||||
xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_RM_PSIL_PAIR,
|
||||
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
|
||||
sizeof(*req), sizeof(*resp));
|
||||
if (IS_ERR(xfer)) {
|
||||
ret = PTR_ERR(xfer);
|
||||
dev_err(dev, "RM_PSIL:Message reconfig failed(%d)\n", ret);
|
||||
return ret;
|
||||
}
|
||||
req = (struct ti_sci_msg_psil_pair *)xfer->xfer_buf;
|
||||
req->nav_id = nav_id;
|
||||
req->src_thread = src_thread;
|
||||
req->dst_thread = dst_thread;
|
||||
|
||||
ret = ti_sci_do_xfer(info, xfer);
|
||||
if (ret) {
|
||||
dev_err(dev, "RM_PSIL:Mbox send fail %d\n", ret);
|
||||
goto fail;
|
||||
}
|
||||
|
||||
resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
|
||||
ret = ti_sci_is_response_ack(resp) ? 0 : -EINVAL;
|
||||
|
||||
fail:
|
||||
ti_sci_put_one_xfer(&info->minfo, xfer);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* ti_sci_cmd_rm_psil_unpair() - Unpair PSI-L source from destination thread
|
||||
* @handle: Pointer to TI SCI handle.
|
||||
* @nav_id: Device ID of Navigator Subsystem which should be used for
|
||||
* unpairing
|
||||
* @src_thread: Source PSI-L thread ID
|
||||
* @dst_thread: Destination PSI-L thread ID
|
||||
*
|
||||
* Return: 0 if all went well, else returns appropriate error value.
|
||||
*/
|
||||
static int ti_sci_cmd_rm_psil_unpair(const struct ti_sci_handle *handle,
|
||||
u32 nav_id, u32 src_thread, u32 dst_thread)
|
||||
{
|
||||
struct ti_sci_msg_psil_unpair *req;
|
||||
struct ti_sci_msg_hdr *resp;
|
||||
struct ti_sci_xfer *xfer;
|
||||
struct ti_sci_info *info;
|
||||
struct device *dev;
|
||||
int ret = 0;
|
||||
|
||||
if (IS_ERR(handle))
|
||||
return PTR_ERR(handle);
|
||||
if (!handle)
|
||||
return -EINVAL;
|
||||
|
||||
info = handle_to_ti_sci_info(handle);
|
||||
dev = info->dev;
|
||||
|
||||
xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_RM_PSIL_UNPAIR,
|
||||
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
|
||||
sizeof(*req), sizeof(*resp));
|
||||
if (IS_ERR(xfer)) {
|
||||
ret = PTR_ERR(xfer);
|
||||
dev_err(dev, "RM_PSIL:Message reconfig failed(%d)\n", ret);
|
||||
return ret;
|
||||
}
|
||||
req = (struct ti_sci_msg_psil_unpair *)xfer->xfer_buf;
|
||||
req->nav_id = nav_id;
|
||||
req->src_thread = src_thread;
|
||||
req->dst_thread = dst_thread;
|
||||
|
||||
ret = ti_sci_do_xfer(info, xfer);
|
||||
if (ret) {
|
||||
dev_err(dev, "RM_PSIL:Mbox send fail %d\n", ret);
|
||||
goto fail;
|
||||
}
|
||||
|
||||
resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
|
||||
ret = ti_sci_is_response_ack(resp) ? 0 : -EINVAL;
|
||||
|
||||
fail:
|
||||
ti_sci_put_one_xfer(&info->minfo, xfer);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* ti_sci_cmd_rm_udmap_tx_ch_cfg() - Configure a UDMAP TX channel
|
||||
* @handle: Pointer to TI SCI handle.
|
||||
* @params: Pointer to ti_sci_msg_rm_udmap_tx_ch_cfg TX channel config
|
||||
* structure
|
||||
*
|
||||
* Return: 0 if all went well, else returns appropriate error value.
|
||||
*
|
||||
* See @ti_sci_msg_rm_udmap_tx_ch_cfg and @ti_sci_msg_rm_udmap_tx_ch_cfg_req for
|
||||
* more info.
|
||||
*/
|
||||
static int ti_sci_cmd_rm_udmap_tx_ch_cfg(const struct ti_sci_handle *handle,
|
||||
const struct ti_sci_msg_rm_udmap_tx_ch_cfg *params)
|
||||
{
|
||||
struct ti_sci_msg_rm_udmap_tx_ch_cfg_req *req;
|
||||
struct ti_sci_msg_hdr *resp;
|
||||
struct ti_sci_xfer *xfer;
|
||||
struct ti_sci_info *info;
|
||||
struct device *dev;
|
||||
int ret = 0;
|
||||
|
||||
if (IS_ERR_OR_NULL(handle))
|
||||
return -EINVAL;
|
||||
|
||||
info = handle_to_ti_sci_info(handle);
|
||||
dev = info->dev;
|
||||
|
||||
xfer = ti_sci_get_one_xfer(info, TISCI_MSG_RM_UDMAP_TX_CH_CFG,
|
||||
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
|
||||
sizeof(*req), sizeof(*resp));
|
||||
if (IS_ERR(xfer)) {
|
||||
ret = PTR_ERR(xfer);
|
||||
dev_err(info->dev, "Message TX_CH_CFG alloc failed(%d)\n", ret);
|
||||
return ret;
|
||||
}
|
||||
req = (struct ti_sci_msg_rm_udmap_tx_ch_cfg_req *)xfer->xfer_buf;
|
||||
req->valid_params = params->valid_params;
|
||||
req->nav_id = params->nav_id;
|
||||
req->index = params->index;
|
||||
req->tx_pause_on_err = params->tx_pause_on_err;
|
||||
req->tx_filt_einfo = params->tx_filt_einfo;
|
||||
req->tx_filt_pswords = params->tx_filt_pswords;
|
||||
req->tx_atype = params->tx_atype;
|
||||
req->tx_chan_type = params->tx_chan_type;
|
||||
req->tx_supr_tdpkt = params->tx_supr_tdpkt;
|
||||
req->tx_fetch_size = params->tx_fetch_size;
|
||||
req->tx_credit_count = params->tx_credit_count;
|
||||
req->txcq_qnum = params->txcq_qnum;
|
||||
req->tx_priority = params->tx_priority;
|
||||
req->tx_qos = params->tx_qos;
|
||||
req->tx_orderid = params->tx_orderid;
|
||||
req->fdepth = params->fdepth;
|
||||
req->tx_sched_priority = params->tx_sched_priority;
|
||||
req->tx_burst_size = params->tx_burst_size;
|
||||
|
||||
ret = ti_sci_do_xfer(info, xfer);
|
||||
if (ret) {
|
||||
dev_err(info->dev, "Mbox send TX_CH_CFG fail %d\n", ret);
|
||||
goto fail;
|
||||
}
|
||||
|
||||
resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
|
||||
ret = ti_sci_is_response_ack(resp) ? 0 : -EINVAL;
|
||||
|
||||
fail:
|
||||
ti_sci_put_one_xfer(&info->minfo, xfer);
|
||||
dev_dbg(info->dev, "TX_CH_CFG: chn %u ret:%u\n", params->index, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* ti_sci_cmd_rm_udmap_rx_ch_cfg() - Configure a UDMAP RX channel
|
||||
* @handle: Pointer to TI SCI handle.
|
||||
* @params: Pointer to ti_sci_msg_rm_udmap_rx_ch_cfg RX channel config
|
||||
* structure
|
||||
*
|
||||
* Return: 0 if all went well, else returns appropriate error value.
|
||||
*
|
||||
* See @ti_sci_msg_rm_udmap_rx_ch_cfg and @ti_sci_msg_rm_udmap_rx_ch_cfg_req for
|
||||
* more info.
|
||||
*/
|
||||
static int ti_sci_cmd_rm_udmap_rx_ch_cfg(const struct ti_sci_handle *handle,
|
||||
const struct ti_sci_msg_rm_udmap_rx_ch_cfg *params)
|
||||
{
|
||||
struct ti_sci_msg_rm_udmap_rx_ch_cfg_req *req;
|
||||
struct ti_sci_msg_hdr *resp;
|
||||
struct ti_sci_xfer *xfer;
|
||||
struct ti_sci_info *info;
|
||||
struct device *dev;
|
||||
int ret = 0;
|
||||
|
||||
if (IS_ERR_OR_NULL(handle))
|
||||
return -EINVAL;
|
||||
|
||||
info = handle_to_ti_sci_info(handle);
|
||||
dev = info->dev;
|
||||
|
||||
xfer = ti_sci_get_one_xfer(info, TISCI_MSG_RM_UDMAP_RX_CH_CFG,
|
||||
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
|
||||
sizeof(*req), sizeof(*resp));
|
||||
if (IS_ERR(xfer)) {
|
||||
ret = PTR_ERR(xfer);
|
||||
dev_err(info->dev, "Message RX_CH_CFG alloc failed(%d)\n", ret);
|
||||
return ret;
|
||||
}
|
||||
req = (struct ti_sci_msg_rm_udmap_rx_ch_cfg_req *)xfer->xfer_buf;
|
||||
req->valid_params = params->valid_params;
|
||||
req->nav_id = params->nav_id;
|
||||
req->index = params->index;
|
||||
req->rx_fetch_size = params->rx_fetch_size;
|
||||
req->rxcq_qnum = params->rxcq_qnum;
|
||||
req->rx_priority = params->rx_priority;
|
||||
req->rx_qos = params->rx_qos;
|
||||
req->rx_orderid = params->rx_orderid;
|
||||
req->rx_sched_priority = params->rx_sched_priority;
|
||||
req->flowid_start = params->flowid_start;
|
||||
req->flowid_cnt = params->flowid_cnt;
|
||||
req->rx_pause_on_err = params->rx_pause_on_err;
|
||||
req->rx_atype = params->rx_atype;
|
||||
req->rx_chan_type = params->rx_chan_type;
|
||||
req->rx_ignore_short = params->rx_ignore_short;
|
||||
req->rx_ignore_long = params->rx_ignore_long;
|
||||
req->rx_burst_size = params->rx_burst_size;
|
||||
|
||||
ret = ti_sci_do_xfer(info, xfer);
|
||||
if (ret) {
|
||||
dev_err(info->dev, "Mbox send RX_CH_CFG fail %d\n", ret);
|
||||
goto fail;
|
||||
}
|
||||
|
||||
resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
|
||||
ret = ti_sci_is_response_ack(resp) ? 0 : -EINVAL;
|
||||
|
||||
fail:
|
||||
ti_sci_put_one_xfer(&info->minfo, xfer);
|
||||
dev_dbg(info->dev, "RX_CH_CFG: chn %u ret:%d\n", params->index, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* ti_sci_cmd_rm_udmap_rx_flow_cfg() - Configure UDMAP RX FLOW
|
||||
* @handle: Pointer to TI SCI handle.
|
||||
* @params: Pointer to ti_sci_msg_rm_udmap_flow_cfg RX FLOW config
|
||||
* structure
|
||||
*
|
||||
* Return: 0 if all went well, else returns appropriate error value.
|
||||
*
|
||||
* See @ti_sci_msg_rm_udmap_flow_cfg and @ti_sci_msg_rm_udmap_flow_cfg_req for
|
||||
* more info.
|
||||
*/
|
||||
static int ti_sci_cmd_rm_udmap_rx_flow_cfg(const struct ti_sci_handle *handle,
|
||||
const struct ti_sci_msg_rm_udmap_flow_cfg *params)
|
||||
{
|
||||
struct ti_sci_msg_rm_udmap_flow_cfg_req *req;
|
||||
struct ti_sci_msg_hdr *resp;
|
||||
struct ti_sci_xfer *xfer;
|
||||
struct ti_sci_info *info;
|
||||
struct device *dev;
|
||||
int ret = 0;
|
||||
|
||||
if (IS_ERR_OR_NULL(handle))
|
||||
return -EINVAL;
|
||||
|
||||
info = handle_to_ti_sci_info(handle);
|
||||
dev = info->dev;
|
||||
|
||||
xfer = ti_sci_get_one_xfer(info, TISCI_MSG_RM_UDMAP_FLOW_CFG,
|
||||
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
|
||||
sizeof(*req), sizeof(*resp));
|
||||
if (IS_ERR(xfer)) {
|
||||
ret = PTR_ERR(xfer);
|
||||
dev_err(dev, "RX_FL_CFG: Message alloc failed(%d)\n", ret);
|
||||
return ret;
|
||||
}
|
||||
req = (struct ti_sci_msg_rm_udmap_flow_cfg_req *)xfer->xfer_buf;
|
||||
req->valid_params = params->valid_params;
|
||||
req->nav_id = params->nav_id;
|
||||
req->flow_index = params->flow_index;
|
||||
req->rx_einfo_present = params->rx_einfo_present;
|
||||
req->rx_psinfo_present = params->rx_psinfo_present;
|
||||
req->rx_error_handling = params->rx_error_handling;
|
||||
req->rx_desc_type = params->rx_desc_type;
|
||||
req->rx_sop_offset = params->rx_sop_offset;
|
||||
req->rx_dest_qnum = params->rx_dest_qnum;
|
||||
req->rx_src_tag_hi = params->rx_src_tag_hi;
|
||||
req->rx_src_tag_lo = params->rx_src_tag_lo;
|
||||
req->rx_dest_tag_hi = params->rx_dest_tag_hi;
|
||||
req->rx_dest_tag_lo = params->rx_dest_tag_lo;
|
||||
req->rx_src_tag_hi_sel = params->rx_src_tag_hi_sel;
|
||||
req->rx_src_tag_lo_sel = params->rx_src_tag_lo_sel;
|
||||
req->rx_dest_tag_hi_sel = params->rx_dest_tag_hi_sel;
|
||||
req->rx_dest_tag_lo_sel = params->rx_dest_tag_lo_sel;
|
||||
req->rx_fdq0_sz0_qnum = params->rx_fdq0_sz0_qnum;
|
||||
req->rx_fdq1_qnum = params->rx_fdq1_qnum;
|
||||
req->rx_fdq2_qnum = params->rx_fdq2_qnum;
|
||||
req->rx_fdq3_qnum = params->rx_fdq3_qnum;
|
||||
req->rx_ps_location = params->rx_ps_location;
|
||||
|
||||
ret = ti_sci_do_xfer(info, xfer);
|
||||
if (ret) {
|
||||
dev_err(dev, "RX_FL_CFG: Mbox send fail %d\n", ret);
|
||||
goto fail;
|
||||
}
|
||||
|
||||
resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
|
||||
ret = ti_sci_is_response_ack(resp) ? 0 : -EINVAL;
|
||||
|
||||
fail:
|
||||
ti_sci_put_one_xfer(&info->minfo, xfer);
|
||||
dev_dbg(info->dev, "RX_FL_CFG: %u ret:%d\n", params->flow_index, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* ti_sci_setup_ops() - Setup the operations structures
|
||||
* @info: pointer to TISCI pointer
|
||||
@ -2016,6 +2491,9 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
|
||||
struct ti_sci_clk_ops *cops = &ops->clk_ops;
|
||||
struct ti_sci_rm_core_ops *rm_core_ops = &ops->rm_core_ops;
|
||||
struct ti_sci_rm_irq_ops *iops = &ops->rm_irq_ops;
|
||||
struct ti_sci_rm_ringacc_ops *rops = &ops->rm_ring_ops;
|
||||
struct ti_sci_rm_psil_ops *psilops = &ops->rm_psil_ops;
|
||||
struct ti_sci_rm_udmap_ops *udmap_ops = &ops->rm_udmap_ops;
|
||||
|
||||
core_ops->reboot_device = ti_sci_cmd_core_reboot;
|
||||
|
||||
@ -2055,6 +2533,16 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
|
||||
iops->set_event_map = ti_sci_cmd_set_event_map;
|
||||
iops->free_irq = ti_sci_cmd_free_irq;
|
||||
iops->free_event_map = ti_sci_cmd_free_event_map;
|
||||
|
||||
rops->config = ti_sci_cmd_ring_config;
|
||||
rops->get_config = ti_sci_cmd_ring_get_config;
|
||||
|
||||
psilops->pair = ti_sci_cmd_rm_psil_pair;
|
||||
psilops->unpair = ti_sci_cmd_rm_psil_unpair;
|
||||
|
||||
udmap_ops->tx_ch_cfg = ti_sci_cmd_rm_udmap_tx_ch_cfg;
|
||||
udmap_ops->rx_ch_cfg = ti_sci_cmd_rm_udmap_rx_ch_cfg;
|
||||
udmap_ops->rx_flow_cfg = ti_sci_cmd_rm_udmap_rx_flow_cfg;
|
||||
}
|
||||
|
||||
/**
|
||||
|
||||
@ -42,6 +42,35 @@
|
||||
#define TI_SCI_MSG_SET_IRQ 0x1000
|
||||
#define TI_SCI_MSG_FREE_IRQ 0x1001
|
||||
|
||||
/* NAVSS resource management */
|
||||
/* Ringacc requests */
|
||||
#define TI_SCI_MSG_RM_RING_ALLOCATE 0x1100
|
||||
#define TI_SCI_MSG_RM_RING_FREE 0x1101
|
||||
#define TI_SCI_MSG_RM_RING_RECONFIG 0x1102
|
||||
#define TI_SCI_MSG_RM_RING_RESET 0x1103
|
||||
#define TI_SCI_MSG_RM_RING_CFG 0x1110
|
||||
#define TI_SCI_MSG_RM_RING_GET_CFG 0x1111
|
||||
|
||||
/* PSI-L requests */
|
||||
#define TI_SCI_MSG_RM_PSIL_PAIR 0x1280
|
||||
#define TI_SCI_MSG_RM_PSIL_UNPAIR 0x1281
|
||||
|
||||
#define TI_SCI_MSG_RM_UDMAP_TX_ALLOC 0x1200
|
||||
#define TI_SCI_MSG_RM_UDMAP_TX_FREE 0x1201
|
||||
#define TI_SCI_MSG_RM_UDMAP_RX_ALLOC 0x1210
|
||||
#define TI_SCI_MSG_RM_UDMAP_RX_FREE 0x1211
|
||||
#define TI_SCI_MSG_RM_UDMAP_FLOW_CFG 0x1220
|
||||
#define TI_SCI_MSG_RM_UDMAP_OPT_FLOW_CFG 0x1221
|
||||
|
||||
#define TISCI_MSG_RM_UDMAP_TX_CH_CFG 0x1205
|
||||
#define TISCI_MSG_RM_UDMAP_TX_CH_GET_CFG 0x1206
|
||||
#define TISCI_MSG_RM_UDMAP_RX_CH_CFG 0x1215
|
||||
#define TISCI_MSG_RM_UDMAP_RX_CH_GET_CFG 0x1216
|
||||
#define TISCI_MSG_RM_UDMAP_FLOW_CFG 0x1230
|
||||
#define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_CFG 0x1231
|
||||
#define TISCI_MSG_RM_UDMAP_FLOW_GET_CFG 0x1232
|
||||
#define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_GET_CFG 0x1233
|
||||
|
||||
/**
|
||||
* struct ti_sci_msg_hdr - Generic Message Header for All messages and responses
|
||||
* @type: Type of messages: One of TI_SCI_MSG* values
|
||||
@ -563,4 +592,650 @@ struct ti_sci_msg_req_manage_irq {
|
||||
u8 secondary_host;
|
||||
} __packed;
|
||||
|
||||
/**
|
||||
* struct ti_sci_msg_rm_ring_cfg_req - Configure a Navigator Subsystem ring
|
||||
*
|
||||
* Configures the non-real-time registers of a Navigator Subsystem ring.
|
||||
* @hdr: Generic Header
|
||||
* @valid_params: Bitfield defining validity of ring configuration parameters.
|
||||
* The ring configuration fields are not valid, and will not be used for
|
||||
* ring configuration, if their corresponding valid bit is zero.
|
||||
* Valid bit usage:
|
||||
* 0 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_lo
|
||||
* 1 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_hi
|
||||
* 2 - Valid bit for @tisci_msg_rm_ring_cfg_req count
|
||||
* 3 - Valid bit for @tisci_msg_rm_ring_cfg_req mode
|
||||
* 4 - Valid bit for @tisci_msg_rm_ring_cfg_req size
|
||||
* 5 - Valid bit for @tisci_msg_rm_ring_cfg_req order_id
|
||||
* @nav_id: Device ID of Navigator Subsystem from which the ring is allocated
|
||||
* @index: ring index to be configured.
|
||||
* @addr_lo: 32 LSBs of ring base address to be programmed into the ring's
|
||||
* RING_BA_LO register
|
||||
* @addr_hi: 16 MSBs of ring base address to be programmed into the ring's
|
||||
* RING_BA_HI register.
|
||||
* @count: Number of ring elements. Must be even if mode is CREDENTIALS or QM
|
||||
* modes.
|
||||
* @mode: Specifies the mode the ring is to be configured.
|
||||
* @size: Specifies encoded ring element size. To calculate the encoded size use
|
||||
* the formula (log2(size_bytes) - 2), where size_bytes cannot be
|
||||
* greater than 256.
|
||||
* @order_id: Specifies the ring's bus order ID.
|
||||
*/
|
||||
struct ti_sci_msg_rm_ring_cfg_req {
|
||||
struct ti_sci_msg_hdr hdr;
|
||||
u32 valid_params;
|
||||
u16 nav_id;
|
||||
u16 index;
|
||||
u32 addr_lo;
|
||||
u32 addr_hi;
|
||||
u32 count;
|
||||
u8 mode;
|
||||
u8 size;
|
||||
u8 order_id;
|
||||
} __packed;
|
||||
|
||||
/**
|
||||
* struct ti_sci_msg_rm_ring_get_cfg_req - Get RA ring's configuration
|
||||
*
|
||||
* Gets the configuration of the non-real-time register fields of a ring. The
|
||||
* host, or a supervisor of the host, who owns the ring must be the requesting
|
||||
* host. The values of the non-real-time registers are returned in
|
||||
* @ti_sci_msg_rm_ring_get_cfg_resp.
|
||||
*
|
||||
* @hdr: Generic Header
|
||||
* @nav_id: Device ID of Navigator Subsystem from which the ring is allocated
|
||||
* @index: ring index.
|
||||
*/
|
||||
struct ti_sci_msg_rm_ring_get_cfg_req {
|
||||
struct ti_sci_msg_hdr hdr;
|
||||
u16 nav_id;
|
||||
u16 index;
|
||||
} __packed;
|
||||
|
||||
/**
|
||||
* struct ti_sci_msg_rm_ring_get_cfg_resp - Ring get configuration response
|
||||
*
|
||||
* Response received by host processor after RM has handled
|
||||
* @ti_sci_msg_rm_ring_get_cfg_req. The response contains the ring's
|
||||
* non-real-time register values.
|
||||
*
|
||||
* @hdr: Generic Header
|
||||
* @addr_lo: Ring 32 LSBs of base address
|
||||
* @addr_hi: Ring 16 MSBs of base address.
|
||||
* @count: Ring number of elements.
|
||||
* @mode: Ring mode.
|
||||
* @size: encoded Ring element size
|
||||
* @order_id: ing order ID.
|
||||
*/
|
||||
struct ti_sci_msg_rm_ring_get_cfg_resp {
|
||||
struct ti_sci_msg_hdr hdr;
|
||||
u32 addr_lo;
|
||||
u32 addr_hi;
|
||||
u32 count;
|
||||
u8 mode;
|
||||
u8 size;
|
||||
u8 order_id;
|
||||
} __packed;
|
||||
|
||||
/**
|
||||
* struct ti_sci_msg_psil_pair - Pairs a PSI-L source thread to a destination
|
||||
* thread
|
||||
* @hdr: Generic Header
|
||||
* @nav_id: SoC Navigator Subsystem device ID whose PSI-L config proxy is
|
||||
* used to pair the source and destination threads.
|
||||
* @src_thread: PSI-L source thread ID within the PSI-L System thread map.
|
||||
*
|
||||
* UDMAP transmit channels mapped to source threads will have their
|
||||
* TCHAN_THRD_ID register programmed with the destination thread if the pairing
|
||||
* is successful.
|
||||
|
||||
* @dst_thread: PSI-L destination thread ID within the PSI-L System thread map.
|
||||
* PSI-L destination threads start at index 0x8000. The request is NACK'd if
|
||||
* the destination thread is not greater than or equal to 0x8000.
|
||||
*
|
||||
* UDMAP receive channels mapped to destination threads will have their
|
||||
* RCHAN_THRD_ID register programmed with the source thread if the pairing
|
||||
* is successful.
|
||||
*
|
||||
* Request type is TI_SCI_MSG_RM_PSIL_PAIR, response is a generic ACK or NACK
|
||||
* message.
|
||||
*/
|
||||
struct ti_sci_msg_psil_pair {
|
||||
struct ti_sci_msg_hdr hdr;
|
||||
u32 nav_id;
|
||||
u32 src_thread;
|
||||
u32 dst_thread;
|
||||
} __packed;
|
||||
|
||||
/**
|
||||
* struct ti_sci_msg_psil_unpair - Unpairs a PSI-L source thread from a
|
||||
* destination thread
|
||||
* @hdr: Generic Header
|
||||
* @nav_id: SoC Navigator Subsystem device ID whose PSI-L config proxy is
|
||||
* used to unpair the source and destination threads.
|
||||
* @src_thread: PSI-L source thread ID within the PSI-L System thread map.
|
||||
*
|
||||
* UDMAP transmit channels mapped to source threads will have their
|
||||
* TCHAN_THRD_ID register cleared if the unpairing is successful.
|
||||
*
|
||||
* @dst_thread: PSI-L destination thread ID within the PSI-L System thread map.
|
||||
* PSI-L destination threads start at index 0x8000. The request is NACK'd if
|
||||
* the destination thread is not greater than or equal to 0x8000.
|
||||
*
|
||||
* UDMAP receive channels mapped to destination threads will have their
|
||||
* RCHAN_THRD_ID register cleared if the unpairing is successful.
|
||||
*
|
||||
* Request type is TI_SCI_MSG_RM_PSIL_UNPAIR, response is a generic ACK or NACK
|
||||
* message.
|
||||
*/
|
||||
struct ti_sci_msg_psil_unpair {
|
||||
struct ti_sci_msg_hdr hdr;
|
||||
u32 nav_id;
|
||||
u32 src_thread;
|
||||
u32 dst_thread;
|
||||
} __packed;
|
||||
|
||||
/**
|
||||
* struct ti_sci_msg_udmap_rx_flow_cfg - UDMAP receive flow configuration
|
||||
* message
|
||||
* @hdr: Generic Header
|
||||
* @nav_id: SoC Navigator Subsystem device ID from which the receive flow is
|
||||
* allocated
|
||||
* @flow_index: UDMAP receive flow index for non-optional configuration.
|
||||
* @rx_ch_index: Specifies the index of the receive channel using the flow_index
|
||||
* @rx_einfo_present: UDMAP receive flow extended packet info present.
|
||||
* @rx_psinfo_present: UDMAP receive flow PS words present.
|
||||
* @rx_error_handling: UDMAP receive flow error handling configuration. Valid
|
||||
* values are TI_SCI_RM_UDMAP_RX_FLOW_ERR_DROP/RETRY.
|
||||
* @rx_desc_type: UDMAP receive flow descriptor type. It can be one of
|
||||
* TI_SCI_RM_UDMAP_RX_FLOW_DESC_HOST/MONO.
|
||||
* @rx_sop_offset: UDMAP receive flow start of packet offset.
|
||||
* @rx_dest_qnum: UDMAP receive flow destination queue number.
|
||||
* @rx_ps_location: UDMAP receive flow PS words location.
|
||||
* 0 - end of packet descriptor
|
||||
* 1 - Beginning of the data buffer
|
||||
* @rx_src_tag_hi: UDMAP receive flow source tag high byte constant
|
||||
* @rx_src_tag_lo: UDMAP receive flow source tag low byte constant
|
||||
* @rx_dest_tag_hi: UDMAP receive flow destination tag high byte constant
|
||||
* @rx_dest_tag_lo: UDMAP receive flow destination tag low byte constant
|
||||
* @rx_src_tag_hi_sel: UDMAP receive flow source tag high byte selector
|
||||
* @rx_src_tag_lo_sel: UDMAP receive flow source tag low byte selector
|
||||
* @rx_dest_tag_hi_sel: UDMAP receive flow destination tag high byte selector
|
||||
* @rx_dest_tag_lo_sel: UDMAP receive flow destination tag low byte selector
|
||||
* @rx_size_thresh_en: UDMAP receive flow packet size based free buffer queue
|
||||
* enable. If enabled, the ti_sci_rm_udmap_rx_flow_opt_cfg also need to be
|
||||
* configured and sent.
|
||||
* @rx_fdq0_sz0_qnum: UDMAP receive flow free descriptor queue 0.
|
||||
* @rx_fdq1_qnum: UDMAP receive flow free descriptor queue 1.
|
||||
* @rx_fdq2_qnum: UDMAP receive flow free descriptor queue 2.
|
||||
* @rx_fdq3_qnum: UDMAP receive flow free descriptor queue 3.
|
||||
*
|
||||
* For detailed information on the settings, see the UDMAP section of the TRM.
|
||||
*/
|
||||
struct ti_sci_msg_udmap_rx_flow_cfg {
|
||||
struct ti_sci_msg_hdr hdr;
|
||||
u32 nav_id;
|
||||
u32 flow_index;
|
||||
u32 rx_ch_index;
|
||||
u8 rx_einfo_present;
|
||||
u8 rx_psinfo_present;
|
||||
u8 rx_error_handling;
|
||||
u8 rx_desc_type;
|
||||
u16 rx_sop_offset;
|
||||
u16 rx_dest_qnum;
|
||||
u8 rx_ps_location;
|
||||
u8 rx_src_tag_hi;
|
||||
u8 rx_src_tag_lo;
|
||||
u8 rx_dest_tag_hi;
|
||||
u8 rx_dest_tag_lo;
|
||||
u8 rx_src_tag_hi_sel;
|
||||
u8 rx_src_tag_lo_sel;
|
||||
u8 rx_dest_tag_hi_sel;
|
||||
u8 rx_dest_tag_lo_sel;
|
||||
u8 rx_size_thresh_en;
|
||||
u16 rx_fdq0_sz0_qnum;
|
||||
u16 rx_fdq1_qnum;
|
||||
u16 rx_fdq2_qnum;
|
||||
u16 rx_fdq3_qnum;
|
||||
} __packed;
|
||||
|
||||
/**
|
||||
* struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg - parameters for UDMAP receive
|
||||
* flow optional configuration
|
||||
* @hdr: Generic Header
|
||||
* @nav_id: SoC Navigator Subsystem device ID from which the receive flow is
|
||||
* allocated
|
||||
* @flow_index: UDMAP receive flow index for optional configuration.
|
||||
* @rx_ch_index: Specifies the index of the receive channel using the flow_index
|
||||
* @rx_size_thresh0: UDMAP receive flow packet size threshold 0.
|
||||
* @rx_size_thresh1: UDMAP receive flow packet size threshold 1.
|
||||
* @rx_size_thresh2: UDMAP receive flow packet size threshold 2.
|
||||
* @rx_fdq0_sz1_qnum: UDMAP receive flow free descriptor queue for size
|
||||
* threshold 1.
|
||||
* @rx_fdq0_sz2_qnum: UDMAP receive flow free descriptor queue for size
|
||||
* threshold 2.
|
||||
* @rx_fdq0_sz3_qnum: UDMAP receive flow free descriptor queue for size
|
||||
* threshold 3.
|
||||
*
|
||||
* For detailed information on the settings, see the UDMAP section of the TRM.
|
||||
*/
|
||||
struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg {
|
||||
struct ti_sci_msg_hdr hdr;
|
||||
u32 nav_id;
|
||||
u32 flow_index;
|
||||
u32 rx_ch_index;
|
||||
u16 rx_size_thresh0;
|
||||
u16 rx_size_thresh1;
|
||||
u16 rx_size_thresh2;
|
||||
u16 rx_fdq0_sz1_qnum;
|
||||
u16 rx_fdq0_sz2_qnum;
|
||||
u16 rx_fdq0_sz3_qnum;
|
||||
} __packed;
|
||||
|
||||
/**
|
||||
* Configures a Navigator Subsystem UDMAP transmit channel
|
||||
*
|
||||
* Configures the non-real-time registers of a Navigator Subsystem UDMAP
|
||||
* transmit channel. The channel index must be assigned to the host defined
|
||||
* in the TISCI header via the RM board configuration resource assignment
|
||||
* range list.
|
||||
*
|
||||
* @hdr: Generic Header
|
||||
*
|
||||
* @valid_params: Bitfield defining validity of tx channel configuration
|
||||
* parameters. The tx channel configuration fields are not valid, and will not
|
||||
* be used for ch configuration, if their corresponding valid bit is zero.
|
||||
* Valid bit usage:
|
||||
* 0 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_pause_on_err
|
||||
* 1 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_atype
|
||||
* 2 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_chan_type
|
||||
* 3 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_fetch_size
|
||||
* 4 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::txcq_qnum
|
||||
* 5 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_priority
|
||||
* 6 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_qos
|
||||
* 7 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_orderid
|
||||
* 8 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_sched_priority
|
||||
* 9 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_einfo
|
||||
* 10 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_pswords
|
||||
* 11 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_supr_tdpkt
|
||||
* 12 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_credit_count
|
||||
* 13 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::fdepth
|
||||
* 14 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_burst_size
|
||||
*
|
||||
* @nav_id: SoC device ID of Navigator Subsystem where tx channel is located
|
||||
*
|
||||
* @index: UDMAP transmit channel index.
|
||||
*
|
||||
* @tx_pause_on_err: UDMAP transmit channel pause on error configuration to
|
||||
* be programmed into the tx_pause_on_err field of the channel's TCHAN_TCFG
|
||||
* register.
|
||||
*
|
||||
* @tx_filt_einfo: UDMAP transmit channel extended packet information passing
|
||||
* configuration to be programmed into the tx_filt_einfo field of the
|
||||
* channel's TCHAN_TCFG register.
|
||||
*
|
||||
* @tx_filt_pswords: UDMAP transmit channel protocol specific word passing
|
||||
* configuration to be programmed into the tx_filt_pswords field of the
|
||||
* channel's TCHAN_TCFG register.
|
||||
*
|
||||
* @tx_atype: UDMAP transmit channel non Ring Accelerator access pointer
|
||||
* interpretation configuration to be programmed into the tx_atype field of
|
||||
* the channel's TCHAN_TCFG register.
|
||||
*
|
||||
* @tx_chan_type: UDMAP transmit channel functional channel type and work
|
||||
* passing mechanism configuration to be programmed into the tx_chan_type
|
||||
* field of the channel's TCHAN_TCFG register.
|
||||
*
|
||||
* @tx_supr_tdpkt: UDMAP transmit channel teardown packet generation suppression
|
||||
* configuration to be programmed into the tx_supr_tdpkt field of the channel's
|
||||
* TCHAN_TCFG register.
|
||||
*
|
||||
* @tx_fetch_size: UDMAP transmit channel number of 32-bit descriptor words to
|
||||
* fetch configuration to be programmed into the tx_fetch_size field of the
|
||||
* channel's TCHAN_TCFG register. The user must make sure to set the maximum
|
||||
* word count that can pass through the channel for any allowed descriptor type.
|
||||
*
|
||||
* @tx_credit_count: UDMAP transmit channel transfer request credit count
|
||||
* configuration to be programmed into the count field of the TCHAN_TCREDIT
|
||||
* register. Specifies how many credits for complete TRs are available.
|
||||
*
|
||||
* @txcq_qnum: UDMAP transmit channel completion queue configuration to be
|
||||
* programmed into the txcq_qnum field of the TCHAN_TCQ register. The specified
|
||||
* completion queue must be assigned to the host, or a subordinate of the host,
|
||||
* requesting configuration of the transmit channel.
|
||||
*
|
||||
* @tx_priority: UDMAP transmit channel transmit priority value to be programmed
|
||||
* into the priority field of the channel's TCHAN_TPRI_CTRL register.
|
||||
*
|
||||
* @tx_qos: UDMAP transmit channel transmit qos value to be programmed into the
|
||||
* qos field of the channel's TCHAN_TPRI_CTRL register.
|
||||
*
|
||||
* @tx_orderid: UDMAP transmit channel bus order id value to be programmed into
|
||||
* the orderid field of the channel's TCHAN_TPRI_CTRL register.
|
||||
*
|
||||
* @fdepth: UDMAP transmit channel FIFO depth configuration to be programmed
|
||||
* into the fdepth field of the TCHAN_TFIFO_DEPTH register. Sets the number of
|
||||
* Tx FIFO bytes which are allowed to be stored for the channel. Check the UDMAP
|
||||
* section of the TRM for restrictions regarding this parameter.
|
||||
*
|
||||
* @tx_sched_priority: UDMAP transmit channel tx scheduling priority
|
||||
* configuration to be programmed into the priority field of the channel's
|
||||
* TCHAN_TST_SCHED register.
|
||||
*
|
||||
* @tx_burst_size: UDMAP transmit channel burst size configuration to be
|
||||
* programmed into the tx_burst_size field of the TCHAN_TCFG register.
|
||||
*/
|
||||
struct ti_sci_msg_rm_udmap_tx_ch_cfg_req {
|
||||
struct ti_sci_msg_hdr hdr;
|
||||
u32 valid_params;
|
||||
u16 nav_id;
|
||||
u16 index;
|
||||
u8 tx_pause_on_err;
|
||||
u8 tx_filt_einfo;
|
||||
u8 tx_filt_pswords;
|
||||
u8 tx_atype;
|
||||
u8 tx_chan_type;
|
||||
u8 tx_supr_tdpkt;
|
||||
u16 tx_fetch_size;
|
||||
u8 tx_credit_count;
|
||||
u16 txcq_qnum;
|
||||
u8 tx_priority;
|
||||
u8 tx_qos;
|
||||
u8 tx_orderid;
|
||||
u16 fdepth;
|
||||
u8 tx_sched_priority;
|
||||
u8 tx_burst_size;
|
||||
} __packed;
|
||||
|
||||
/**
|
||||
* Configures a Navigator Subsystem UDMAP receive channel
|
||||
*
|
||||
* Configures the non-real-time registers of a Navigator Subsystem UDMAP
|
||||
* receive channel. The channel index must be assigned to the host defined
|
||||
* in the TISCI header via the RM board configuration resource assignment
|
||||
* range list.
|
||||
*
|
||||
* @hdr: Generic Header
|
||||
*
|
||||
* @valid_params: Bitfield defining validity of rx channel configuration
|
||||
* parameters.
|
||||
* The rx channel configuration fields are not valid, and will not be used for
|
||||
* ch configuration, if their corresponding valid bit is zero.
|
||||
* Valid bit usage:
|
||||
* 0 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_pause_on_err
|
||||
* 1 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_atype
|
||||
* 2 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_chan_type
|
||||
* 3 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_fetch_size
|
||||
* 4 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rxcq_qnum
|
||||
* 5 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_priority
|
||||
* 6 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_qos
|
||||
* 7 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_orderid
|
||||
* 8 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_sched_priority
|
||||
* 9 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_start
|
||||
* 10 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_cnt
|
||||
* 11 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_short
|
||||
* 12 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_long
|
||||
* 14 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_burst_size
|
||||
*
|
||||
* @nav_id: SoC device ID of Navigator Subsystem where rx channel is located
|
||||
*
|
||||
* @index: UDMAP receive channel index.
|
||||
*
|
||||
* @rx_fetch_size: UDMAP receive channel number of 32-bit descriptor words to
|
||||
* fetch configuration to be programmed into the rx_fetch_size field of the
|
||||
* channel's RCHAN_RCFG register.
|
||||
*
|
||||
* @rxcq_qnum: UDMAP receive channel completion queue configuration to be
|
||||
* programmed into the rxcq_qnum field of the RCHAN_RCQ register.
|
||||
* The specified completion queue must be assigned to the host, or a subordinate
|
||||
* of the host, requesting configuration of the receive channel.
|
||||
*
|
||||
* @rx_priority: UDMAP receive channel receive priority value to be programmed
|
||||
* into the priority field of the channel's RCHAN_RPRI_CTRL register.
|
||||
*
|
||||
* @rx_qos: UDMAP receive channel receive qos value to be programmed into the
|
||||
* qos field of the channel's RCHAN_RPRI_CTRL register.
|
||||
*
|
||||
* @rx_orderid: UDMAP receive channel bus order id value to be programmed into
|
||||
* the orderid field of the channel's RCHAN_RPRI_CTRL register.
|
||||
*
|
||||
* @rx_sched_priority: UDMAP receive channel rx scheduling priority
|
||||
* configuration to be programmed into the priority field of the channel's
|
||||
* RCHAN_RST_SCHED register.
|
||||
*
|
||||
* @flowid_start: UDMAP receive channel additional flows starting index
|
||||
* configuration to program into the flow_start field of the RCHAN_RFLOW_RNG
|
||||
* register. Specifies the starting index for flow IDs the receive channel is to
|
||||
* make use of beyond the default flow. flowid_start and @ref flowid_cnt must be
|
||||
* set as valid and configured together. The starting flow ID set by
|
||||
* @ref flowid_cnt must be a flow index within the Navigator Subsystem's subset
|
||||
* of flows beyond the default flows statically mapped to receive channels.
|
||||
* The additional flows must be assigned to the host, or a subordinate of the
|
||||
* host, requesting configuration of the receive channel.
|
||||
*
|
||||
* @flowid_cnt: UDMAP receive channel additional flows count configuration to
|
||||
* program into the flowid_cnt field of the RCHAN_RFLOW_RNG register.
|
||||
* This field specifies how many flow IDs are in the additional contiguous range
|
||||
* of legal flow IDs for the channel. @ref flowid_start and flowid_cnt must be
|
||||
* set as valid and configured together. Disabling the valid_params field bit
|
||||
* for flowid_cnt indicates no flow IDs other than the default are to be
|
||||
* allocated and used by the receive channel. @ref flowid_start plus flowid_cnt
|
||||
* cannot be greater than the number of receive flows in the receive channel's
|
||||
* Navigator Subsystem. The additional flows must be assigned to the host, or a
|
||||
* subordinate of the host, requesting configuration of the receive channel.
|
||||
*
|
||||
* @rx_pause_on_err: UDMAP receive channel pause on error configuration to be
|
||||
* programmed into the rx_pause_on_err field of the channel's RCHAN_RCFG
|
||||
* register.
|
||||
*
|
||||
* @rx_atype: UDMAP receive channel non Ring Accelerator access pointer
|
||||
* interpretation configuration to be programmed into the rx_atype field of the
|
||||
* channel's RCHAN_RCFG register.
|
||||
*
|
||||
* @rx_chan_type: UDMAP receive channel functional channel type and work passing
|
||||
* mechanism configuration to be programmed into the rx_chan_type field of the
|
||||
* channel's RCHAN_RCFG register.
|
||||
*
|
||||
* @rx_ignore_short: UDMAP receive channel short packet treatment configuration
|
||||
* to be programmed into the rx_ignore_short field of the RCHAN_RCFG register.
|
||||
*
|
||||
* @rx_ignore_long: UDMAP receive channel long packet treatment configuration to
|
||||
* be programmed into the rx_ignore_long field of the RCHAN_RCFG register.
|
||||
*
|
||||
* @rx_burst_size: UDMAP receive channel burst size configuration to be
|
||||
* programmed into the rx_burst_size field of the RCHAN_RCFG register.
|
||||
*/
|
||||
struct ti_sci_msg_rm_udmap_rx_ch_cfg_req {
|
||||
struct ti_sci_msg_hdr hdr;
|
||||
u32 valid_params;
|
||||
u16 nav_id;
|
||||
u16 index;
|
||||
u16 rx_fetch_size;
|
||||
u16 rxcq_qnum;
|
||||
u8 rx_priority;
|
||||
u8 rx_qos;
|
||||
u8 rx_orderid;
|
||||
u8 rx_sched_priority;
|
||||
u16 flowid_start;
|
||||
u16 flowid_cnt;
|
||||
u8 rx_pause_on_err;
|
||||
u8 rx_atype;
|
||||
u8 rx_chan_type;
|
||||
u8 rx_ignore_short;
|
||||
u8 rx_ignore_long;
|
||||
u8 rx_burst_size;
|
||||
} __packed;
|
||||
|
||||
/**
|
||||
* Configures a Navigator Subsystem UDMAP receive flow
|
||||
*
|
||||
* Configures a Navigator Subsystem UDMAP receive flow's registers.
|
||||
* Configuration does not include the flow registers which handle size-based
|
||||
* free descriptor queue routing.
|
||||
*
|
||||
* The flow index must be assigned to the host defined in the TISCI header via
|
||||
* the RM board configuration resource assignment range list.
|
||||
*
|
||||
* @hdr: Standard TISCI header
|
||||
*
|
||||
* @valid_params
|
||||
* Bitfield defining validity of rx flow configuration parameters. The
|
||||
* rx flow configuration fields are not valid, and will not be used for flow
|
||||
* configuration, if their corresponding valid bit is zero. Valid bit usage:
|
||||
* 0 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_einfo_present
|
||||
* 1 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_psinfo_present
|
||||
* 2 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_error_handling
|
||||
* 3 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_desc_type
|
||||
* 4 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_sop_offset
|
||||
* 5 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_qnum
|
||||
* 6 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi
|
||||
* 7 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo
|
||||
* 8 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi
|
||||
* 9 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo
|
||||
* 10 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi_sel
|
||||
* 11 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo_sel
|
||||
* 12 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi_sel
|
||||
* 13 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo_sel
|
||||
* 14 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq0_sz0_qnum
|
||||
* 15 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq1_sz0_qnum
|
||||
* 16 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq2_sz0_qnum
|
||||
* 17 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq3_sz0_qnum
|
||||
* 18 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_ps_location
|
||||
*
|
||||
* @nav_id: SoC device ID of Navigator Subsystem from which the receive flow is
|
||||
* allocated
|
||||
*
|
||||
* @flow_index: UDMAP receive flow index for non-optional configuration.
|
||||
*
|
||||
* @rx_einfo_present:
|
||||
* UDMAP receive flow extended packet info present configuration to be
|
||||
* programmed into the rx_einfo_present field of the flow's RFLOW_RFA register.
|
||||
*
|
||||
* @rx_psinfo_present:
|
||||
* UDMAP receive flow PS words present configuration to be programmed into the
|
||||
* rx_psinfo_present field of the flow's RFLOW_RFA register.
|
||||
*
|
||||
* @rx_error_handling:
|
||||
* UDMAP receive flow error handling configuration to be programmed into the
|
||||
* rx_error_handling field of the flow's RFLOW_RFA register.
|
||||
*
|
||||
* @rx_desc_type:
|
||||
* UDMAP receive flow descriptor type configuration to be programmed into the
|
||||
* rx_desc_type field field of the flow's RFLOW_RFA register.
|
||||
*
|
||||
* @rx_sop_offset:
|
||||
* UDMAP receive flow start of packet offset configuration to be programmed
|
||||
* into the rx_sop_offset field of the RFLOW_RFA register. See the UDMAP
|
||||
* section of the TRM for more information on this setting. Valid values for
|
||||
* this field are 0-255 bytes.
|
||||
*
|
||||
* @rx_dest_qnum:
|
||||
* UDMAP receive flow destination queue configuration to be programmed into the
|
||||
* rx_dest_qnum field of the flow's RFLOW_RFA register. The specified
|
||||
* destination queue must be valid within the Navigator Subsystem and must be
|
||||
* owned by the host, or a subordinate of the host, requesting allocation and
|
||||
* configuration of the receive flow.
|
||||
*
|
||||
* @rx_src_tag_hi:
|
||||
* UDMAP receive flow source tag high byte constant configuration to be
|
||||
* programmed into the rx_src_tag_hi field of the flow's RFLOW_RFB register.
|
||||
* See the UDMAP section of the TRM for more information on this setting.
|
||||
*
|
||||
* @rx_src_tag_lo:
|
||||
* UDMAP receive flow source tag low byte constant configuration to be
|
||||
* programmed into the rx_src_tag_lo field of the flow's RFLOW_RFB register.
|
||||
* See the UDMAP section of the TRM for more information on this setting.
|
||||
*
|
||||
* @rx_dest_tag_hi:
|
||||
* UDMAP receive flow destination tag high byte constant configuration to be
|
||||
* programmed into the rx_dest_tag_hi field of the flow's RFLOW_RFB register.
|
||||
* See the UDMAP section of the TRM for more information on this setting.
|
||||
*
|
||||
* @rx_dest_tag_lo:
|
||||
* UDMAP receive flow destination tag low byte constant configuration to be
|
||||
* programmed into the rx_dest_tag_lo field of the flow's RFLOW_RFB register.
|
||||
* See the UDMAP section of the TRM for more information on this setting.
|
||||
*
|
||||
* @rx_src_tag_hi_sel:
|
||||
* UDMAP receive flow source tag high byte selector configuration to be
|
||||
* programmed into the rx_src_tag_hi_sel field of the RFLOW_RFC register. See
|
||||
* the UDMAP section of the TRM for more information on this setting.
|
||||
*
|
||||
* @rx_src_tag_lo_sel:
|
||||
* UDMAP receive flow source tag low byte selector configuration to be
|
||||
* programmed into the rx_src_tag_lo_sel field of the RFLOW_RFC register. See
|
||||
* the UDMAP section of the TRM for more information on this setting.
|
||||
*
|
||||
* @rx_dest_tag_hi_sel:
|
||||
* UDMAP receive flow destination tag high byte selector configuration to be
|
||||
* programmed into the rx_dest_tag_hi_sel field of the RFLOW_RFC register. See
|
||||
* the UDMAP section of the TRM for more information on this setting.
|
||||
*
|
||||
* @rx_dest_tag_lo_sel:
|
||||
* UDMAP receive flow destination tag low byte selector configuration to be
|
||||
* programmed into the rx_dest_tag_lo_sel field of the RFLOW_RFC register. See
|
||||
* the UDMAP section of the TRM for more information on this setting.
|
||||
*
|
||||
* @rx_fdq0_sz0_qnum:
|
||||
* UDMAP receive flow free descriptor queue 0 configuration to be programmed
|
||||
* into the rx_fdq0_sz0_qnum field of the flow's RFLOW_RFD register. See the
|
||||
* UDMAP section of the TRM for more information on this setting. The specified
|
||||
* free queue must be valid within the Navigator Subsystem and must be owned
|
||||
* by the host, or a subordinate of the host, requesting allocation and
|
||||
* configuration of the receive flow.
|
||||
*
|
||||
* @rx_fdq1_qnum:
|
||||
* UDMAP receive flow free descriptor queue 1 configuration to be programmed
|
||||
* into the rx_fdq1_qnum field of the flow's RFLOW_RFD register. See the
|
||||
* UDMAP section of the TRM for more information on this setting. The specified
|
||||
* free queue must be valid within the Navigator Subsystem and must be owned
|
||||
* by the host, or a subordinate of the host, requesting allocation and
|
||||
* configuration of the receive flow.
|
||||
*
|
||||
* @rx_fdq2_qnum:
|
||||
* UDMAP receive flow free descriptor queue 2 configuration to be programmed
|
||||
* into the rx_fdq2_qnum field of the flow's RFLOW_RFE register. See the
|
||||
* UDMAP section of the TRM for more information on this setting. The specified
|
||||
* free queue must be valid within the Navigator Subsystem and must be owned
|
||||
* by the host, or a subordinate of the host, requesting allocation and
|
||||
* configuration of the receive flow.
|
||||
*
|
||||
* @rx_fdq3_qnum:
|
||||
* UDMAP receive flow free descriptor queue 3 configuration to be programmed
|
||||
* into the rx_fdq3_qnum field of the flow's RFLOW_RFE register. See the
|
||||
* UDMAP section of the TRM for more information on this setting. The specified
|
||||
* free queue must be valid within the Navigator Subsystem and must be owned
|
||||
* by the host, or a subordinate of the host, requesting allocation and
|
||||
* configuration of the receive flow.
|
||||
*
|
||||
* @rx_ps_location:
|
||||
* UDMAP receive flow PS words location configuration to be programmed into the
|
||||
* rx_ps_location field of the flow's RFLOW_RFA register.
|
||||
*/
|
||||
struct ti_sci_msg_rm_udmap_flow_cfg_req {
|
||||
struct ti_sci_msg_hdr hdr;
|
||||
u32 valid_params;
|
||||
u16 nav_id;
|
||||
u16 flow_index;
|
||||
u8 rx_einfo_present;
|
||||
u8 rx_psinfo_present;
|
||||
u8 rx_error_handling;
|
||||
u8 rx_desc_type;
|
||||
u16 rx_sop_offset;
|
||||
u16 rx_dest_qnum;
|
||||
u8 rx_src_tag_hi;
|
||||
u8 rx_src_tag_lo;
|
||||
u8 rx_dest_tag_hi;
|
||||
u8 rx_dest_tag_lo;
|
||||
u8 rx_src_tag_hi_sel;
|
||||
u8 rx_src_tag_lo_sel;
|
||||
u8 rx_dest_tag_hi_sel;
|
||||
u8 rx_dest_tag_lo_sel;
|
||||
u16 rx_fdq0_sz0_qnum;
|
||||
u16 rx_fdq1_qnum;
|
||||
u16 rx_fdq2_qnum;
|
||||
u16 rx_fdq3_qnum;
|
||||
u8 rx_ps_location;
|
||||
} __packed;
|
||||
|
||||
#endif /* __TI_SCI_H */
|
||||
|
||||
@ -241,6 +241,218 @@ struct ti_sci_rm_irq_ops {
|
||||
u16 global_event, u8 vint_status_bit);
|
||||
};
|
||||
|
||||
/* RA config.addr_lo parameter is valid for RM ring configure TI_SCI message */
|
||||
#define TI_SCI_MSG_VALUE_RM_RING_ADDR_LO_VALID BIT(0)
|
||||
/* RA config.addr_hi parameter is valid for RM ring configure TI_SCI message */
|
||||
#define TI_SCI_MSG_VALUE_RM_RING_ADDR_HI_VALID BIT(1)
|
||||
/* RA config.count parameter is valid for RM ring configure TI_SCI message */
|
||||
#define TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID BIT(2)
|
||||
/* RA config.mode parameter is valid for RM ring configure TI_SCI message */
|
||||
#define TI_SCI_MSG_VALUE_RM_RING_MODE_VALID BIT(3)
|
||||
/* RA config.size parameter is valid for RM ring configure TI_SCI message */
|
||||
#define TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID BIT(4)
|
||||
/* RA config.order_id parameter is valid for RM ring configure TISCI message */
|
||||
#define TI_SCI_MSG_VALUE_RM_RING_ORDER_ID_VALID BIT(5)
|
||||
|
||||
#define TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER \
|
||||
(TI_SCI_MSG_VALUE_RM_RING_ADDR_LO_VALID | \
|
||||
TI_SCI_MSG_VALUE_RM_RING_ADDR_HI_VALID | \
|
||||
TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID | \
|
||||
TI_SCI_MSG_VALUE_RM_RING_MODE_VALID | \
|
||||
TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID)
|
||||
|
||||
/**
|
||||
* struct ti_sci_rm_ringacc_ops - Ring Accelerator Management operations
|
||||
* @config: configure the SoC Navigator Subsystem Ring Accelerator ring
|
||||
* @get_config: get the SoC Navigator Subsystem Ring Accelerator ring
|
||||
* configuration
|
||||
*/
|
||||
struct ti_sci_rm_ringacc_ops {
|
||||
int (*config)(const struct ti_sci_handle *handle,
|
||||
u32 valid_params, u16 nav_id, u16 index,
|
||||
u32 addr_lo, u32 addr_hi, u32 count, u8 mode,
|
||||
u8 size, u8 order_id
|
||||
);
|
||||
int (*get_config)(const struct ti_sci_handle *handle,
|
||||
u32 nav_id, u32 index, u8 *mode,
|
||||
u32 *addr_lo, u32 *addr_hi, u32 *count,
|
||||
u8 *size, u8 *order_id);
|
||||
};
|
||||
|
||||
/**
|
||||
* struct ti_sci_rm_psil_ops - PSI-L thread operations
|
||||
* @pair: pair PSI-L source thread to a destination thread.
|
||||
* If the src_thread is mapped to UDMA tchan, the corresponding channel's
|
||||
* TCHAN_THRD_ID register is updated.
|
||||
* If the dst_thread is mapped to UDMA rchan, the corresponding channel's
|
||||
* RCHAN_THRD_ID register is updated.
|
||||
* @unpair: unpair PSI-L source thread from a destination thread.
|
||||
* If the src_thread is mapped to UDMA tchan, the corresponding channel's
|
||||
* TCHAN_THRD_ID register is cleared.
|
||||
* If the dst_thread is mapped to UDMA rchan, the corresponding channel's
|
||||
* RCHAN_THRD_ID register is cleared.
|
||||
*/
|
||||
struct ti_sci_rm_psil_ops {
|
||||
int (*pair)(const struct ti_sci_handle *handle, u32 nav_id,
|
||||
u32 src_thread, u32 dst_thread);
|
||||
int (*unpair)(const struct ti_sci_handle *handle, u32 nav_id,
|
||||
u32 src_thread, u32 dst_thread);
|
||||
};
|
||||
|
||||
/* UDMAP channel types */
|
||||
#define TI_SCI_RM_UDMAP_CHAN_TYPE_PKT_PBRR 2
|
||||
#define TI_SCI_RM_UDMAP_CHAN_TYPE_PKT_PBRR_SB 3 /* RX only */
|
||||
#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_PBRR 10
|
||||
#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_PBVR 11
|
||||
#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBRR 12
|
||||
#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBVR 13
|
||||
|
||||
#define TI_SCI_RM_UDMAP_RX_FLOW_DESC_HOST 0
|
||||
#define TI_SCI_RM_UDMAP_RX_FLOW_DESC_MONO 2
|
||||
|
||||
#define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES 1
|
||||
#define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_128_BYTES 2
|
||||
#define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_256_BYTES 3
|
||||
|
||||
/* UDMAP TX/RX channel valid_params common declarations */
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PAUSE_ON_ERR_VALID BIT(0)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ATYPE_VALID BIT(1)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_CHAN_TYPE_VALID BIT(2)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_FETCH_SIZE_VALID BIT(3)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_CQ_QNUM_VALID BIT(4)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PRIORITY_VALID BIT(5)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_QOS_VALID BIT(6)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ORDER_ID_VALID BIT(7)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_SCHED_PRIORITY_VALID BIT(8)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_BURST_SIZE_VALID BIT(14)
|
||||
|
||||
/**
|
||||
* Configures a Navigator Subsystem UDMAP transmit channel
|
||||
*
|
||||
* Configures a Navigator Subsystem UDMAP transmit channel registers.
|
||||
* See @ti_sci_msg_rm_udmap_tx_ch_cfg_req
|
||||
*/
|
||||
struct ti_sci_msg_rm_udmap_tx_ch_cfg {
|
||||
u32 valid_params;
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FILT_EINFO_VALID BIT(9)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FILT_PSWORDS_VALID BIT(10)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_SUPR_TDPKT_VALID BIT(11)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_CREDIT_COUNT_VALID BIT(12)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FDEPTH_VALID BIT(13)
|
||||
u16 nav_id;
|
||||
u16 index;
|
||||
u8 tx_pause_on_err;
|
||||
u8 tx_filt_einfo;
|
||||
u8 tx_filt_pswords;
|
||||
u8 tx_atype;
|
||||
u8 tx_chan_type;
|
||||
u8 tx_supr_tdpkt;
|
||||
u16 tx_fetch_size;
|
||||
u8 tx_credit_count;
|
||||
u16 txcq_qnum;
|
||||
u8 tx_priority;
|
||||
u8 tx_qos;
|
||||
u8 tx_orderid;
|
||||
u16 fdepth;
|
||||
u8 tx_sched_priority;
|
||||
u8 tx_burst_size;
|
||||
};
|
||||
|
||||
/**
|
||||
* Configures a Navigator Subsystem UDMAP receive channel
|
||||
*
|
||||
* Configures a Navigator Subsystem UDMAP receive channel registers.
|
||||
* See @ti_sci_msg_rm_udmap_rx_ch_cfg_req
|
||||
*/
|
||||
struct ti_sci_msg_rm_udmap_rx_ch_cfg {
|
||||
u32 valid_params;
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_START_VALID BIT(9)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_CNT_VALID BIT(10)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_SHORT_VALID BIT(11)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_LONG_VALID BIT(12)
|
||||
u16 nav_id;
|
||||
u16 index;
|
||||
u16 rx_fetch_size;
|
||||
u16 rxcq_qnum;
|
||||
u8 rx_priority;
|
||||
u8 rx_qos;
|
||||
u8 rx_orderid;
|
||||
u8 rx_sched_priority;
|
||||
u16 flowid_start;
|
||||
u16 flowid_cnt;
|
||||
u8 rx_pause_on_err;
|
||||
u8 rx_atype;
|
||||
u8 rx_chan_type;
|
||||
u8 rx_ignore_short;
|
||||
u8 rx_ignore_long;
|
||||
u8 rx_burst_size;
|
||||
};
|
||||
|
||||
/**
|
||||
* Configures a Navigator Subsystem UDMAP receive flow
|
||||
*
|
||||
* Configures a Navigator Subsystem UDMAP receive flow's registers.
|
||||
* See @tis_ci_msg_rm_udmap_flow_cfg_req
|
||||
*/
|
||||
struct ti_sci_msg_rm_udmap_flow_cfg {
|
||||
u32 valid_params;
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_EINFO_PRESENT_VALID BIT(0)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_PSINFO_PRESENT_VALID BIT(1)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_ERROR_HANDLING_VALID BIT(2)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DESC_TYPE_VALID BIT(3)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SOP_OFFSET_VALID BIT(4)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_QNUM_VALID BIT(5)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_HI_VALID BIT(6)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_LO_VALID BIT(7)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_HI_VALID BIT(8)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_LO_VALID BIT(9)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_HI_SEL_VALID BIT(10)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_LO_SEL_VALID BIT(11)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_HI_SEL_VALID BIT(12)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_LO_SEL_VALID BIT(13)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ0_SZ0_QNUM_VALID BIT(14)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ1_QNUM_VALID BIT(15)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ2_QNUM_VALID BIT(16)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ3_QNUM_VALID BIT(17)
|
||||
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_PS_LOCATION_VALID BIT(18)
|
||||
u16 nav_id;
|
||||
u16 flow_index;
|
||||
u8 rx_einfo_present;
|
||||
u8 rx_psinfo_present;
|
||||
u8 rx_error_handling;
|
||||
u8 rx_desc_type;
|
||||
u16 rx_sop_offset;
|
||||
u16 rx_dest_qnum;
|
||||
u8 rx_src_tag_hi;
|
||||
u8 rx_src_tag_lo;
|
||||
u8 rx_dest_tag_hi;
|
||||
u8 rx_dest_tag_lo;
|
||||
u8 rx_src_tag_hi_sel;
|
||||
u8 rx_src_tag_lo_sel;
|
||||
u8 rx_dest_tag_hi_sel;
|
||||
u8 rx_dest_tag_lo_sel;
|
||||
u16 rx_fdq0_sz0_qnum;
|
||||
u16 rx_fdq1_qnum;
|
||||
u16 rx_fdq2_qnum;
|
||||
u16 rx_fdq3_qnum;
|
||||
u8 rx_ps_location;
|
||||
};
|
||||
|
||||
/**
|
||||
* struct ti_sci_rm_udmap_ops - UDMA Management operations
|
||||
* @tx_ch_cfg: configure SoC Navigator Subsystem UDMA transmit channel.
|
||||
* @rx_ch_cfg: configure SoC Navigator Subsystem UDMA receive channel.
|
||||
* @rx_flow_cfg1: configure SoC Navigator Subsystem UDMA receive flow.
|
||||
*/
|
||||
struct ti_sci_rm_udmap_ops {
|
||||
int (*tx_ch_cfg)(const struct ti_sci_handle *handle,
|
||||
const struct ti_sci_msg_rm_udmap_tx_ch_cfg *params);
|
||||
int (*rx_ch_cfg)(const struct ti_sci_handle *handle,
|
||||
const struct ti_sci_msg_rm_udmap_rx_ch_cfg *params);
|
||||
int (*rx_flow_cfg)(const struct ti_sci_handle *handle,
|
||||
const struct ti_sci_msg_rm_udmap_flow_cfg *params);
|
||||
};
|
||||
|
||||
/**
|
||||
* struct ti_sci_ops - Function support for TI SCI
|
||||
* @dev_ops: Device specific operations
|
||||
@ -254,6 +466,9 @@ struct ti_sci_ops {
|
||||
struct ti_sci_clk_ops clk_ops;
|
||||
struct ti_sci_rm_core_ops rm_core_ops;
|
||||
struct ti_sci_rm_irq_ops rm_irq_ops;
|
||||
struct ti_sci_rm_ringacc_ops rm_ring_ops;
|
||||
struct ti_sci_rm_psil_ops rm_psil_ops;
|
||||
struct ti_sci_rm_udmap_ops rm_udmap_ops;
|
||||
};
|
||||
|
||||
/**
|
||||
|
||||
Loading…
Reference in New Issue
Block a user