From a08c0d309d8c078d22717d815cf9853f6f2c07bd Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Wed, 3 Feb 2021 17:14:28 +0800 Subject: [PATCH 1/2] r8152: replace several functions about phy patch request Replace r8153_patch_request() with rtl_phy_patch_request(). Replace r8153_pre_ram_code() with rtl_pre_ram_code(). Replace r8153_post_ram_code() with rtl_post_ram_code(). Add rtl_patch_key_set(). The new functions have an additional parameter. It is used to wait the patch request command finished. When the PHY is resumed from the state of power cut, the PHY is at a safe mode and the OCP_PHY_PATCH_STAT wouldn't be updated. For this situation, it is safe to set patch request command without waiting OCP_PHY_PATCH_STAT. Signed-off-by: Hayes Wang Signed-off-by: Jakub Kicinski --- drivers/net/usb/r8152.c | 88 ++++++++++++++++++++++++----------------- 1 file changed, 52 insertions(+), 36 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 0d7d2938e21d..e4dda75a6e0d 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3468,59 +3468,76 @@ static void rtl_clear_bp(struct r8152 *tp, u16 type) ocp_write_word(tp, type, PLA_BP_BA, 0); } -static int r8153_patch_request(struct r8152 *tp, bool request) +static int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait) { - u16 data; + u16 data, check; int i; data = ocp_reg_read(tp, OCP_PHY_PATCH_CMD); - if (request) + if (request) { data |= PATCH_REQUEST; - else + check = 0; + } else { data &= ~PATCH_REQUEST; + check = PATCH_READY; + } ocp_reg_write(tp, OCP_PHY_PATCH_CMD, data); - for (i = 0; request && i < 5000; i++) { + for (i = 0; wait && i < 5000; i++) { + u32 ocp_data; + usleep_range(1000, 2000); - if (ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY) + ocp_data = ocp_reg_read(tp, OCP_PHY_PATCH_STAT); + if ((ocp_data & PATCH_READY) ^ check) break; } - if (request && !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) { - netif_err(tp, drv, tp->netdev, "patch request fail\n"); - r8153_patch_request(tp, false); + if (request && wait && + !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) { + dev_err(&tp->intf->dev, "PHY patch request fail\n"); + rtl_phy_patch_request(tp, false, false); return -ETIME; } else { return 0; } } -static int r8153_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key) +static void rtl_patch_key_set(struct r8152 *tp, u16 key_addr, u16 patch_key) { - if (r8153_patch_request(tp, true)) { - dev_err(&tp->intf->dev, "patch request fail\n"); - return -ETIME; - } + if (patch_key && key_addr) { + sram_write(tp, key_addr, patch_key); + sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK); + } else if (key_addr) { + u16 data; - sram_write(tp, key_addr, patch_key); - sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK); + sram_write(tp, 0x0000, 0x0000); + + data = ocp_reg_read(tp, OCP_PHY_LOCK); + data &= ~PATCH_LOCK; + ocp_reg_write(tp, OCP_PHY_LOCK, data); + + sram_write(tp, key_addr, 0x0000); + } else { + WARN_ON_ONCE(1); + } +} + +static int +rtl_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key, bool wait) +{ + if (rtl_phy_patch_request(tp, true, wait)) + return -ETIME; + + rtl_patch_key_set(tp, key_addr, patch_key); return 0; } -static int r8153_post_ram_code(struct r8152 *tp, u16 key_addr) +static int rtl_post_ram_code(struct r8152 *tp, u16 key_addr, bool wait) { - u16 data; + rtl_patch_key_set(tp, key_addr, 0); - sram_write(tp, 0x0000, 0x0000); - - data = ocp_reg_read(tp, OCP_PHY_LOCK); - data &= ~PATCH_LOCK; - ocp_reg_write(tp, OCP_PHY_LOCK, data); - - sram_write(tp, key_addr, 0x0000); - - r8153_patch_request(tp, false); + rtl_phy_patch_request(tp, false, wait); ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base); @@ -4005,7 +4022,7 @@ static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac) dev_dbg(&tp->intf->dev, "successfully applied %s\n", mac->info); } -static void rtl8152_apply_firmware(struct r8152 *tp) +static void rtl8152_apply_firmware(struct r8152 *tp, bool power_cut) { struct rtl_fw *rtl_fw = &tp->rtl_fw; const struct firmware *fw; @@ -4036,12 +4053,11 @@ static void rtl8152_apply_firmware(struct r8152 *tp) case RTL_FW_PHY_START: key = (struct fw_phy_patch_key *)block; key_addr = __le16_to_cpu(key->key_reg); - r8153_pre_ram_code(tp, key_addr, - __le16_to_cpu(key->key_data)); + rtl_pre_ram_code(tp, key_addr, __le16_to_cpu(key->key_data), !power_cut); break; case RTL_FW_PHY_STOP: WARN_ON(!key_addr); - r8153_post_ram_code(tp, key_addr); + rtl_post_ram_code(tp, key_addr, !power_cut); break; case RTL_FW_PHY_NC: rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block); @@ -4246,7 +4262,7 @@ static void rtl8152_disable(struct r8152 *tp) static void r8152b_hw_phy_cfg(struct r8152 *tp) { - rtl8152_apply_firmware(tp); + rtl8152_apply_firmware(tp, false); rtl_eee_enable(tp, tp->eee_en); r8152_aldps_en(tp, true); r8152b_enable_fc(tp); @@ -4528,7 +4544,7 @@ static void r8153_hw_phy_cfg(struct r8152 *tp) /* disable EEE before updating the PHY parameters */ rtl_eee_enable(tp, false); - rtl8152_apply_firmware(tp); + rtl8152_apply_firmware(tp, false); if (tp->version == RTL_VER_03) { data = ocp_reg_read(tp, OCP_EEE_CFG); @@ -4602,7 +4618,7 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp) /* disable EEE before updating the PHY parameters */ rtl_eee_enable(tp, false); - rtl8152_apply_firmware(tp); + rtl8152_apply_firmware(tp, false); r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags)); @@ -4643,7 +4659,7 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp) ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); /* Advnace EEE */ - if (!r8153_patch_request(tp, true)) { + if (!rtl_phy_patch_request(tp, true, true)) { data = ocp_reg_read(tp, OCP_POWER_CFG); data |= EEE_CLKDIV_EN; ocp_reg_write(tp, OCP_POWER_CFG, data); @@ -4660,7 +4676,7 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp) ocp_reg_write(tp, OCP_SYSCLK_CFG, clk_div_expo(5)); tp->ups_info._250m_ckdiv = true; - r8153_patch_request(tp, false); + rtl_phy_patch_request(tp, false, true); } if (tp->eee_en) From 80fd850b31f09263ad175b2f640d5c5c6f76ed41 Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Wed, 3 Feb 2021 17:14:29 +0800 Subject: [PATCH 2/2] r8152: adjust the flow of power cut for RTL8153B For runtime resuming, the RTL8153B may be resumed from the state of power cut, when enabling the feature of UPS. Then, the PHY would be reset, so it is necessary to be initailized again. Besides, the USB_U1U2_TIMER also has to be set again, so I move it from r8153b_init() to r8153b_hw_phy_cfg(). Signed-off-by: Hayes Wang Signed-off-by: Jakub Kicinski --- drivers/net/usb/r8152.c | 68 ++++++++++++++++++++++++----------------- 1 file changed, 40 insertions(+), 28 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index e4dda75a6e0d..2d7cc63bef89 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -1371,6 +1371,10 @@ void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val) static int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags); +static int +rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex, + u32 advertising); + static int rtl8152_set_mac_address(struct net_device *netdev, void *p) { struct r8152 *tp = netdev_priv(netdev); @@ -3205,8 +3209,6 @@ static void r8153b_ups_en(struct r8152 *tp, bool enable) ocp_data |= BIT(0); ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data); } else { - u16 data; - ocp_data &= ~(UPS_EN | USP_PREWAKE); ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); @@ -3214,31 +3216,20 @@ static void r8153b_ups_en(struct r8152 *tp, bool enable) ocp_data &= ~BIT(0); ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data); - ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); - ocp_data &= ~PCUT_STATUS; - ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); + if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) { + int i; - data = r8153_phy_status(tp, 0); + for (i = 0; i < 500; i++) { + if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & + AUTOLOAD_DONE) + break; + msleep(20); + } - switch (data) { - case PHY_STAT_PWRDN: - case PHY_STAT_EXT_INIT: - r8153b_green_en(tp, - test_bit(GREEN_ETHERNET, &tp->flags)); + tp->rtl_ops.hw_phy_cfg(tp); - data = r8152_mdio_read(tp, MII_BMCR); - data &= ~BMCR_PDOWN; - data |= BMCR_RESET; - r8152_mdio_write(tp, MII_BMCR, data); - - data = r8153_phy_status(tp, PHY_STAT_LAN_ON); - fallthrough; - - default: - if (data != PHY_STAT_LAN_ON) - netif_warn(tp, link, tp->netdev, - "PHY not ready"); - break; + rtl8152_set_speed(tp, tp->autoneg, tp->speed, + tp->duplex, tp->advertising); } } } @@ -4612,13 +4603,37 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp) u32 ocp_data; u16 data; + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); + if (ocp_data & PCUT_STATUS) { + ocp_data &= ~PCUT_STATUS; + ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); + } + /* disable ALDPS before updating the PHY parameters */ r8153_aldps_en(tp, false); /* disable EEE before updating the PHY parameters */ rtl_eee_enable(tp, false); - rtl8152_apply_firmware(tp, false); + /* U1/U2/L1 idle timer. 500 us */ + ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); + + data = r8153_phy_status(tp, 0); + + switch (data) { + case PHY_STAT_PWRDN: + case PHY_STAT_EXT_INIT: + rtl8152_apply_firmware(tp, true); + + data = r8152_mdio_read(tp, MII_BMCR); + data &= ~BMCR_PDOWN; + r8152_mdio_write(tp, MII_BMCR, data); + break; + case PHY_STAT_LAN_ON: + default: + rtl8152_apply_firmware(tp, false); + break; + } r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags)); @@ -5544,9 +5559,6 @@ static void r8153b_init(struct r8152 *tp) /* MSC timer = 0xfff * 8ms = 32760 ms */ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff); - /* U1/U2/L1 idle timer. 500 us */ - ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); - r8153b_power_cut_en(tp, false); r8153b_ups_en(tp, false); r8153_queue_wake(tp, false);