diff --git a/drivers/media/i2c/ov13b10.c b/drivers/media/i2c/ov13b10.c
index 207be51deaec..dbc642c5995b 100644
--- a/drivers/media/i2c/ov13b10.c
+++ b/drivers/media/i2c/ov13b10.c
@@ -2,6 +2,9 @@
 // Copyright (c) 2021 Intel Corporation.
 
 #include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/pm_runtime.h>
@@ -573,6 +576,11 @@ struct ov13b10 {
 	struct media_pad pad;
 
 	struct v4l2_ctrl_handler ctrl_handler;
+
+	struct clk *img_clk;
+	struct regulator *avdd;
+	struct gpio_desc *reset;
+
 	/* V4L2 Controls */
 	struct v4l2_ctrl *link_freq;
 	struct v4l2_ctrl *pixel_rate;
@@ -1051,6 +1059,49 @@ static int ov13b10_identify_module(struct ov13b10 *ov13b)
 	return 0;
 }
 
+static int ov13b10_power_off(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct ov13b10 *ov13b10 = to_ov13b10(sd);
+
+	gpiod_set_value_cansleep(ov13b10->reset, 1);
+
+	if (ov13b10->avdd)
+		regulator_disable(ov13b10->avdd);
+
+	clk_disable_unprepare(ov13b10->img_clk);
+
+	return 0;
+}
+
+static int ov13b10_power_on(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct ov13b10 *ov13b10 = to_ov13b10(sd);
+	int ret;
+
+	ret = clk_prepare_enable(ov13b10->img_clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable imaging clock: %d", ret);
+		return ret;
+	}
+
+	if (ov13b10->avdd) {
+		ret = regulator_enable(ov13b10->avdd);
+		if (ret < 0) {
+			dev_err(dev, "failed to enable avdd: %d", ret);
+			clk_disable_unprepare(ov13b10->img_clk);
+			return ret;
+		}
+	}
+
+	gpiod_set_value_cansleep(ov13b10->reset, 0);
+	/* 5ms to wait ready after XSHUTDN assert */
+	usleep_range(5000, 5500);
+
+	return 0;
+}
+
 static int ov13b10_start_streaming(struct ov13b10 *ov13b)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
@@ -1145,7 +1196,7 @@ err_unlock:
 	return ret;
 }
 
-static int __maybe_unused ov13b10_suspend(struct device *dev)
+static int ov13b10_suspend(struct device *dev)
 {
 	struct v4l2_subdev *sd = dev_get_drvdata(dev);
 	struct ov13b10 *ov13b = to_ov13b10(sd);
@@ -1153,26 +1204,35 @@ static int __maybe_unused ov13b10_suspend(struct device *dev)
 	if (ov13b->streaming)
 		ov13b10_stop_streaming(ov13b);
 
+	ov13b10_power_off(dev);
+
 	return 0;
 }
 
-static int __maybe_unused ov13b10_resume(struct device *dev)
+static int ov13b10_resume(struct device *dev)
 {
 	struct v4l2_subdev *sd = dev_get_drvdata(dev);
 	struct ov13b10 *ov13b = to_ov13b10(sd);
 	int ret;
 
+	ret = ov13b10_power_on(dev);
+	if (ret)
+		goto pm_fail;
+
 	if (ov13b->streaming) {
 		ret = ov13b10_start_streaming(ov13b);
 		if (ret)
-			goto error;
+			goto stop_streaming;
 	}
 
 	return 0;
 
-error:
+stop_streaming:
 	ov13b10_stop_streaming(ov13b);
+	ov13b10_power_off(dev);
+pm_fail:
 	ov13b->streaming = false;
+
 	return ret;
 }
 
@@ -1317,6 +1377,34 @@ static void ov13b10_free_controls(struct ov13b10 *ov13b)
 	mutex_destroy(&ov13b->mutex);
 }
 
+static int ov13b10_get_pm_resources(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct ov13b10 *ov13b = to_ov13b10(sd);
+	int ret;
+
+	ov13b->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ov13b->reset))
+		return dev_err_probe(dev, PTR_ERR(ov13b->reset),
+				     "failed to get reset gpio\n");
+
+	ov13b->img_clk = devm_clk_get_optional(dev, NULL);
+	if (IS_ERR(ov13b->img_clk))
+		return dev_err_probe(dev, PTR_ERR(ov13b->img_clk),
+				     "failed to get imaging clock\n");
+
+	ov13b->avdd = devm_regulator_get_optional(dev, "avdd");
+	if (IS_ERR(ov13b->avdd)) {
+		ret = PTR_ERR(ov13b->avdd);
+		ov13b->avdd = NULL;
+		if (ret != -ENODEV)
+			return dev_err_probe(dev, ret,
+					     "failed to get avdd regulator\n");
+	}
+
+	return 0;
+}
+
 static int ov13b10_check_hwcfg(struct device *dev)
 {
 	struct v4l2_fwnode_endpoint bus_cfg = {
@@ -1407,13 +1495,23 @@ static int ov13b10_probe(struct i2c_client *client)
 	/* Initialize subdev */
 	v4l2_i2c_subdev_init(&ov13b->sd, client, &ov13b10_subdev_ops);
 
+	ret = ov13b10_get_pm_resources(&client->dev);
+	if (ret)
+		return ret;
+
 	full_power = acpi_dev_state_d0(&client->dev);
 	if (full_power) {
+		ov13b10_power_on(&client->dev);
+		if (ret) {
+			dev_err(&client->dev, "failed to power on\n");
+			return ret;
+		}
+
 		/* Check module identity */
 		ret = ov13b10_identify_module(ov13b);
 		if (ret) {
 			dev_err(&client->dev, "failed to find sensor: %d\n", ret);
-			return ret;
+			goto error_power_off;
 		}
 	}
 
@@ -1422,7 +1520,7 @@ static int ov13b10_probe(struct i2c_client *client)
 
 	ret = ov13b10_init_controls(ov13b);
 	if (ret)
-		return ret;
+		goto error_power_off;
 
 	/* Initialize subdev */
 	ov13b->sd.internal_ops = &ov13b10_internal_ops;
@@ -1462,6 +1560,9 @@ error_handler_free:
 	ov13b10_free_controls(ov13b);
 	dev_err(&client->dev, "%s failed:%d\n", __func__, ret);
 
+error_power_off:
+	ov13b10_power_off(&client->dev);
+
 	return ret;
 }
 
@@ -1477,9 +1578,8 @@ static void ov13b10_remove(struct i2c_client *client)
 	pm_runtime_disable(&client->dev);
 }
 
-static const struct dev_pm_ops ov13b10_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(ov13b10_suspend, ov13b10_resume)
-};
+static DEFINE_RUNTIME_DEV_PM_OPS(ov13b10_pm_ops, ov13b10_suspend,
+				 ov13b10_resume, NULL);
 
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id ov13b10_acpi_ids[] = {
@@ -1494,7 +1594,7 @@ MODULE_DEVICE_TABLE(acpi, ov13b10_acpi_ids);
 static struct i2c_driver ov13b10_i2c_driver = {
 	.driver = {
 		.name = "ov13b10",
-		.pm = &ov13b10_pm_ops,
+		.pm = pm_ptr(&ov13b10_pm_ops),
 		.acpi_match_table = ACPI_PTR(ov13b10_acpi_ids),
 	},
 	.probe = ov13b10_probe,