iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'spi/for-5.15' into spi-next

Browse Source
This commit is contained in:
Mark Brown 2021-08-26 15:09:52 +01:00
commit 6e9c846aa0
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
28 changed files with 1502 additions and 564 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
View File

@ -19,7 +19,6 @@ properties:
compatible:
enum:
- ibm,fsi2spi
- ibm,fsi2spi-restricted
reg:
items:

48
Documentation/devicetree/bindings/spi/omap-spi.txt
View File

@ -1,48 +0,0 @@
OMAP2+ McSPI device
Required properties:
- compatible :
- "ti,am654-mcspi" for AM654.
- "ti,omap2-mcspi" for OMAP2 & OMAP3.
- "ti,omap4-mcspi" for OMAP4+.
- ti,spi-num-cs : Number of chipselect supported by the instance.
- ti,hwmods: Name of the hwmod associated to the McSPI
- ti,pindir-d0-out-d1-in: Select the D0 pin as output and D1 as
input. The default is D0 as input and
D1 as output.
Optional properties:
- dmas: List of DMA specifiers with the controller specific format
as described in the generic DMA client binding. A tx and rx
specifier is required for each chip select.
- dma-names: List of DMA request names. These strings correspond
1:1 with the DMA specifiers listed in dmas. The string naming
is to be "rxN" and "txN" for RX and TX requests,
respectively, where N equals the chip select number.
Examples:
[hwmod populated DMA resources]
mcspi1: mcspi@1 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,omap4-mcspi";
ti,hwmods = "mcspi1";
ti,spi-num-cs = <4>;
};
[generic DMA request binding]
mcspi1: mcspi@1 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,omap4-mcspi";
ti,hwmods = "mcspi1";
ti,spi-num-cs = <2>;
dmas = <&edma 42
&edma 43
&edma 44
&edma 45>;
dma-names = "tx0", "rx0", "tx1", "rx1";
};

117
Documentation/devicetree/bindings/spi/omap-spi.yaml Normal file
View File

@ -0,0 +1,117 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/omap-spi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: SPI controller bindings for OMAP and K3 SoCs
maintainers:
- Aswath Govindraju <a-govindraju@ti.com>
allOf:
- $ref: spi-controller.yaml#
properties:
compatible:
oneOf:
- items:
- enum:
- ti,am654-mcspi
- ti,am4372-mcspi
- const: ti,omap4-mcspi
- items:
- enum:
- ti,omap2-mcspi
- ti,omap4-mcspi
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
power-domains:
maxItems: 1
ti,spi-num-cs:
$ref: /schemas/types.yaml#/definitions/uint32
description: Number of chipselect supported by the instance.
minimum: 1
maximum: 4
ti,hwmods:
$ref: /schemas/types.yaml#/definitions/string
description:
Must be "mcspi<n>", n being the instance number (1-based).
This property is applicable only on legacy platforms mainly omap2/3
and ti81xx and should not be used on other platforms.
deprecated: true
ti,pindir-d0-out-d1-in:
description:
Select the D0 pin as output and D1 as input. The default is D0
as input and D1 as output.
type: boolean
dmas:
description:
List of DMA specifiers with the controller specific format as
described in the generic DMA client binding. A tx and rx
specifier is required for each chip select.
minItems: 1
maxItems: 8
dma-names:
description:
List of DMA request names. These strings correspond 1:1 with
the DMA sepecifiers listed in dmas. The string names is to be
"rxN" and "txN" for RX and TX requests, respectively. Where N
is the chip select number.
minItems: 1
maxItems: 8
required:
- compatible
- reg
- interrupts
unevaluatedProperties: false
if:
properties:
compatible:
oneOf:
- const: ti,omap2-mcspi
- const: ti,omap4-mcspi
then:
properties:
ti,hwmods:
items:
- pattern: "^mcspi([1-9])$"
else:
properties:
ti,hwmods: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/soc/ti,sci_pm_domain.h>
spi@2100000 {
compatible = "ti,am654-mcspi","ti,omap4-mcspi";
reg = <0x2100000 0x400>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&k3_clks 137 1>;
power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
dma-names = "tx0", "rx0";
};

91
Documentation/devicetree/bindings/spi/rockchip-sfc.yaml Normal file
View File

@ -0,0 +1,91 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/rockchip-sfc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Rockchip Serial Flash Controller (SFC)
maintainers:
- Heiko Stuebner <heiko@sntech.de>
- Chris Morgan <macromorgan@hotmail.com>
allOf:
- $ref: spi-controller.yaml#
properties:
compatible:
const: rockchip,sfc
description:
The rockchip sfc controller is a standalone IP with version register,
and the driver can handle all the feature difference inside the IP
depending on the version register.
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
items:
- description: Bus Clock
- description: Module Clock
clock-names:
items:
- const: clk_sfc
- const: hclk_sfc
power-domains:
maxItems: 1
rockchip,sfc-no-dma:
description: Disable DMA and utilize FIFO mode only
type: boolean
patternProperties:
"^flash@[0-3]$":
type: object
properties:
reg:
minimum: 0
maximum: 3
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/px30-cru.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/px30-power.h>
sfc: spi@ff3a0000 {
compatible = "rockchip,sfc";
reg = <0xff3a0000 0x4000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
clock-names = "clk_sfc", "hclk_sfc";
pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>;
pinctrl-names = "default";
power-domains = <&power PX30_PD_MMC_NAND>;
#address-cells = <1>;
#size-cells = <0>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <108000000>;
spi-rx-bus-width = <2>;
spi-tx-bus-width = <2>;
};
};
...

1
Documentation/devicetree/bindings/spi/spi-mt65xx.txt
View File

@ -11,6 +11,7 @@ Required properties:
- mediatek,mt8135-spi: for mt8135 platforms
- mediatek,mt8173-spi: for mt8173 platforms
- mediatek,mt8183-spi: for mt8183 platforms
- mediatek,mt6893-spi: for mt6893 platforms
- "mediatek,mt8192-spi", "mediatek,mt6765-spi": for mt8192 platforms
- "mediatek,mt8195-spi", "mediatek,mt6765-spi": for mt8195 platforms
- "mediatek,mt8516-spi", "mediatek,mt2712-spi": for mt8516 platforms

63
Documentation/devicetree/bindings/spi/spi-sprd-adi.txt
View File

@ -1,63 +0,0 @@
Spreadtrum ADI controller
ADI is the abbreviation of Anolog-Digital interface, which is used to access
analog chip (such as PMIC) from digital chip. ADI controller follows the SPI
framework for its hardware implementation is alike to SPI bus and its timing
is compatile to SPI timing.
ADI controller has 50 channels including 2 software read/write channels and
48 hardware channels to access analog chip. For 2 software read/write channels,
users should set ADI registers to access analog chip. For hardware channels,
we can configure them to allow other hardware components to use it independently,
which means we can just link one analog chip address to one hardware channel,
then users can access the mapped analog chip address by this hardware channel
triggered by hardware components instead of ADI software channels.
Thus we introduce one property named "sprd,hw-channels" to configure hardware
channels, the first value specifies the hardware channel id which is used to
transfer data triggered by hardware automatically, and the second value specifies
the analog chip address where user want to access by hardware components.
Since we have multi-subsystems will use unique ADI to access analog chip, when
one system is reading/writing data by ADI software channels, that should be under
one hardware spinlock protection to prevent other systems from reading/writing
data by ADI software channels at the same time, or two parallel routine of setting
ADI registers will make ADI controller registers chaos to lead incorrect results.
Then we need one hardware spinlock to synchronize between the multiple subsystems.
The new version ADI controller supplies multiple master channels for different
subsystem accessing, that means no need to add hardware spinlock to synchronize,
thus change the hardware spinlock support to be optional to keep backward
compatibility.
Required properties:
- compatible: Should be "sprd,sc9860-adi".
- reg: Offset and length of ADI-SPI controller register space.
- #address-cells: Number of cells required to define a chip select address
on the ADI-SPI bus. Should be set to 1.
- #size-cells: Size of cells required to define a chip select address size
on the ADI-SPI bus. Should be set to 0.
Optional properties:
- hwlocks: Reference to a phandle of a hwlock provider node.
- hwlock-names: Reference to hwlock name strings defined in the same order
as the hwlocks, should be "adi".
- sprd,hw-channels: This is an array of channel values up to 49 channels.
The first value specifies the hardware channel id which is used to
transfer data triggered by hardware automatically, and the second
value specifies the analog chip address where user want to access
by hardware components.
SPI slave nodes must be children of the SPI controller node and can contain
properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
Example:
adi_bus: spi@40030000 {
compatible = "sprd,sc9860-adi";
reg = <0 0x40030000 0 0x10000>;
hwlocks = <&hwlock1 0>;
hwlock-names = "adi";
#address-cells = <1>;
#size-cells = <0>;
sprd,hw-channels = <30 0x8c20>;
};

104
Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml Normal file
View File

@ -0,0 +1,104 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: "http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Spreadtrum ADI controller
maintainers:
- Orson Zhai <orsonzhai@gmail.com>
- Baolin Wang <baolin.wang7@gmail.com>
- Chunyan Zhang <zhang.lyra@gmail.com>
description: |
ADI is the abbreviation of Anolog-Digital interface, which is used to access
analog chip (such as PMIC) from digital chip. ADI controller follows the SPI
framework for its hardware implementation is alike to SPI bus and its timing
is compatile to SPI timing.
ADI controller has 50 channels including 2 software read/write channels and
48 hardware channels to access analog chip. For 2 software read/write channels,
users should set ADI registers to access analog chip. For hardware channels,
we can configure them to allow other hardware components to use it independently,
which means we can just link one analog chip address to one hardware channel,
then users can access the mapped analog chip address by this hardware channel
triggered by hardware components instead of ADI software channels.
Thus we introduce one property named "sprd,hw-channels" to configure hardware
channels, the first value specifies the hardware channel id which is used to
transfer data triggered by hardware automatically, and the second value specifies
the analog chip address where user want to access by hardware components.
Since we have multi-subsystems will use unique ADI to access analog chip, when
one system is reading/writing data by ADI software channels, that should be under
one hardware spinlock protection to prevent other systems from reading/writing
data by ADI software channels at the same time, or two parallel routine of setting
ADI registers will make ADI controller registers chaos to lead incorrect results.
Then we need one hardware spinlock to synchronize between the multiple subsystems.
The new version ADI controller supplies multiple master channels for different
subsystem accessing, that means no need to add hardware spinlock to synchronize,
thus change the hardware spinlock support to be optional to keep backward
compatibility.
allOf:
- $ref: /spi/spi-controller.yaml#
properties:
compatible:
enum:
- sprd,sc9860-adi
- sprd,sc9863-adi
- sprd,ums512-adi
reg:
maxItems: 1
hwlocks:
maxItems: 1
hwlock-names:
const: adi
sprd,hw-channels:
$ref: /schemas/types.yaml#/definitions/uint32-matrix
description: A list of hardware channels
minItems: 1
maxItems: 48
items:
items:
- description: The hardware channel id which is used to transfer data
triggered by hardware automatically, channel id 0-1 are for software
use, 2-49 are hardware channels.
minimum: 2
maximum: 49
- description: The analog chip address where user want to access by
hardware components.
required:
- compatible
- reg
- '#address-cells'
- '#size-cells'
unevaluatedProperties: false
examples:
- |
aon {
#address-cells = <2>;
#size-cells = <2>;
adi_bus: spi@40030000 {
compatible = "sprd,sc9860-adi";
reg = <0 0x40030000 0 0x10000>;
hwlocks = <&hwlock1 0>;
hwlock-names = "adi";
#address-cells = <1>;
#size-cells = <0>;
sprd,hw-channels = <30 0x8c20>;
};
};
...

12
drivers/spi/Kconfig
View File

@ -658,6 +658,18 @@ config SPI_ROCKCHIP
The main usecase of this controller is to use spi flash as boot
device.
config SPI_ROCKCHIP_SFC
tristate "Rockchip Serial Flash Controller (SFC)"
depends on ARCH_ROCKCHIP || COMPILE_TEST
depends on HAS_IOMEM && HAS_DMA
help
This enables support for Rockchip serial flash controller. This
is a specialized controller used to access SPI flash on some
Rockchip SOCs.
ROCKCHIP SFC supports DMA and PIO modes. When DMA is not available,
the driver automatically falls back to PIO mode.
config SPI_RB4XX
tristate "Mikrotik RB4XX SPI master"
depends on SPI_MASTER && ATH79

1
drivers/spi/Makefile
View File

@ -95,6 +95,7 @@ obj-$(CONFIG_SPI_QCOM_GENI) += spi-geni-qcom.o
obj-$(CONFIG_SPI_QCOM_QSPI) += spi-qcom-qspi.o
obj-$(CONFIG_SPI_QUP) += spi-qup.o
obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
obj-$(CONFIG_SPI_ROCKCHIP_SFC) += spi-rockchip-sfc.o
obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o
obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o

4
drivers/spi/spi-bcm2835aux.c
View File

@ -143,12 +143,12 @@ static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs)
}
#endif /* CONFIG_DEBUG_FS */
static inline u32 bcm2835aux_rd(struct bcm2835aux_spi *bs, unsigned reg)
static inline u32 bcm2835aux_rd(struct bcm2835aux_spi *bs, unsigned int reg)
{
return readl(bs->regs + reg);
}
static inline void bcm2835aux_wr(struct bcm2835aux_spi *bs, unsigned reg,
static inline void bcm2835aux_wr(struct bcm2835aux_spi *bs, unsigned int reg,
u32 val)
{
writel(val, bs->regs + reg);

4
drivers/spi/spi-ep93xx.c
View File

@ -550,7 +550,7 @@ static int ep93xx_spi_prepare_hardware(struct spi_master *master)
u32 val;
int ret;
ret = clk_enable(espi->clk);
ret = clk_prepare_enable(espi->clk);
if (ret)
return ret;
@ -570,7 +570,7 @@ static int ep93xx_spi_unprepare_hardware(struct spi_master *master)
val &= ~SSPCR1_SSE;
writel(val, espi->mmio + SSPCR1);
clk_disable(espi->clk);
clk_disable_unprepare(espi->clk);
return 0;
}

125
drivers/spi/spi-fsi.c
View File

@ -25,16 +25,11 @@
#define SPI_FSI_BASE 0x70000
#define SPI_FSI_INIT_TIMEOUT_MS 1000
#define SPI_FSI_MAX_XFR_SIZE 2048
#define SPI_FSI_MAX_XFR_SIZE_RESTRICTED 8
#define SPI_FSI_MAX_RX_SIZE 8
#define SPI_FSI_MAX_TX_SIZE 40
#define SPI_FSI_ERROR 0x0
#define SPI_FSI_COUNTER_CFG 0x1
#define SPI_FSI_COUNTER_CFG_LOOPS(x) (((u64)(x) & 0xffULL) << 32)
#define SPI_FSI_COUNTER_CFG_N2_RX BIT_ULL(8)
#define SPI_FSI_COUNTER_CFG_N2_TX BIT_ULL(9)
#define SPI_FSI_COUNTER_CFG_N2_IMPLICIT BIT_ULL(10)
#define SPI_FSI_COUNTER_CFG_N2_RELOAD BIT_ULL(11)
#define SPI_FSI_CFG1 0x2
#define SPI_FSI_CLOCK_CFG 0x3
#define SPI_FSI_CLOCK_CFG_MM_ENABLE BIT_ULL(32)
@ -76,8 +71,6 @@ struct fsi_spi {
struct device *dev; /* SPI controller device */
struct fsi_device *fsi; /* FSI2SPI CFAM engine device */
u32 base;
size_t max_xfr_size;
bool restricted;
};
struct fsi_spi_sequence {
@ -241,7 +234,7 @@ static int fsi_spi_reset(struct fsi_spi *ctx)
return fsi_spi_write_reg(ctx, SPI_FSI_STATUS, 0ULL);
}
static int fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val)
static void fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val)
{
/*
* Add the next byte of instruction to the 8-byte sequence register.
@ -251,8 +244,6 @@ static int fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val)
*/
seq->data |= (u64)val << seq->bit;
seq->bit -= 8;
return ((64 - seq->bit) / 8) - 2;
}
static void fsi_spi_sequence_init(struct fsi_spi_sequence *seq)
@ -261,71 +252,11 @@ static void fsi_spi_sequence_init(struct fsi_spi_sequence *seq)
seq->data = 0ULL;
}
static int fsi_spi_sequence_transfer(struct fsi_spi *ctx,
struct fsi_spi_sequence *seq,
struct spi_transfer *transfer)
{
int loops;
int idx;
int rc;
u8 val = 0;
u8 len = min(transfer->len, 8U);
u8 rem = transfer->len % len;
loops = transfer->len / len;
if (transfer->tx_buf) {
val = SPI_FSI_SEQUENCE_SHIFT_OUT(len);
idx = fsi_spi_sequence_add(seq, val);
if (rem)
rem = SPI_FSI_SEQUENCE_SHIFT_OUT(rem);
} else if (transfer->rx_buf) {
val = SPI_FSI_SEQUENCE_SHIFT_IN(len);
idx = fsi_spi_sequence_add(seq, val);
if (rem)
rem = SPI_FSI_SEQUENCE_SHIFT_IN(rem);
} else {
return -EINVAL;
}
if (ctx->restricted && loops > 1) {
dev_warn(ctx->dev,
"Transfer too large; no branches permitted.\n");
return -EINVAL;
}
if (loops > 1) {
u64 cfg = SPI_FSI_COUNTER_CFG_LOOPS(loops - 1);
fsi_spi_sequence_add(seq, SPI_FSI_SEQUENCE_BRANCH(idx));
if (transfer->rx_buf)
cfg |= SPI_FSI_COUNTER_CFG_N2_RX |
SPI_FSI_COUNTER_CFG_N2_TX |
SPI_FSI_COUNTER_CFG_N2_IMPLICIT |
SPI_FSI_COUNTER_CFG_N2_RELOAD;
rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, cfg);
if (rc)
return rc;
} else {
fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, 0ULL);
}
if (rem)
fsi_spi_sequence_add(seq, rem);
return 0;
}
static int fsi_spi_transfer_data(struct fsi_spi *ctx,
struct spi_transfer *transfer)
{
int rc = 0;
u64 status = 0ULL;
u64 cfg = 0ULL;
if (transfer->tx_buf) {
int nb;
@ -363,16 +294,6 @@ static int fsi_spi_transfer_data(struct fsi_spi *ctx,
u64 in = 0ULL;
u8 *rx = transfer->rx_buf;
rc = fsi_spi_read_reg(ctx, SPI_FSI_COUNTER_CFG, &cfg);
if (rc)
return rc;
if (cfg & SPI_FSI_COUNTER_CFG_N2_IMPLICIT) {
rc = fsi_spi_write_reg(ctx, SPI_FSI_DATA_TX, 0);
if (rc)
return rc;
}
while (transfer->len > recv) {
do {
rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS,
@ -439,6 +360,10 @@ static int fsi_spi_transfer_init(struct fsi_spi *ctx)
}
} while (seq_state && (seq_state != SPI_FSI_STATUS_SEQ_STATE_IDLE));
rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, 0ULL);
if (rc)
return rc;
rc = fsi_spi_read_reg(ctx, SPI_FSI_CLOCK_CFG, &clock_cfg);
if (rc)
return rc;
@ -459,6 +384,7 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
{
int rc;
u8 seq_slave = SPI_FSI_SEQUENCE_SEL_SLAVE(mesg->spi->chip_select + 1);
unsigned int len;
struct spi_transfer *transfer;
struct fsi_spi *ctx = spi_controller_get_devdata(ctlr);
@ -471,8 +397,7 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
struct spi_transfer *next = NULL;
/* Sequencer must do shift out (tx) first. */
if (!transfer->tx_buf ||
transfer->len > (ctx->max_xfr_size + 8)) {
if (!transfer->tx_buf || transfer->len > SPI_FSI_MAX_TX_SIZE) {
rc = -EINVAL;
goto error;
}
@ -486,9 +411,13 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
fsi_spi_sequence_init(&seq);
fsi_spi_sequence_add(&seq, seq_slave);
rc = fsi_spi_sequence_transfer(ctx, &seq, transfer);
if (rc)
goto error;
len = transfer->len;
while (len > 8) {
fsi_spi_sequence_add(&seq,
SPI_FSI_SEQUENCE_SHIFT_OUT(8));
len -= 8;
}
fsi_spi_sequence_add(&seq, SPI_FSI_SEQUENCE_SHIFT_OUT(len));
if (!list_is_last(&transfer->transfer_list,
&mesg->transfers)) {
@ -496,7 +425,9 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
/* Sequencer can only do shift in (rx) after tx. */
if (next->rx_buf) {
if (next->len > ctx->max_xfr_size) {
u8 shift;
if (next->len > SPI_FSI_MAX_RX_SIZE) {
rc = -EINVAL;
goto error;
}
@ -504,10 +435,8 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
dev_dbg(ctx->dev, "Sequence rx of %d bytes.\n",
next->len);
rc = fsi_spi_sequence_transfer(ctx, &seq,
next);
if (rc)
goto error;
shift = SPI_FSI_SEQUENCE_SHIFT_IN(next->len);
fsi_spi_sequence_add(&seq, shift);
} else {
next = NULL;
}
@ -541,9 +470,7 @@ error:
static size_t fsi_spi_max_transfer_size(struct spi_device *spi)
{
struct fsi_spi *ctx = spi_controller_get_devdata(spi->controller);
return ctx->max_xfr_size;
return SPI_FSI_MAX_RX_SIZE;
}
static int fsi_spi_probe(struct device *dev)
@ -582,14 +509,6 @@ static int fsi_spi_probe(struct device *dev)
ctx->fsi = fsi;
ctx->base = base + SPI_FSI_BASE;
if (of_device_is_compatible(np, "ibm,fsi2spi-restricted")) {
ctx->restricted = true;
ctx->max_xfr_size = SPI_FSI_MAX_XFR_SIZE_RESTRICTED;
} else {
ctx->restricted = false;
ctx->max_xfr_size = SPI_FSI_MAX_XFR_SIZE;
}
rc = devm_spi_register_controller(dev, ctlr);
if (rc)
spi_controller_put(ctlr);

1
drivers/spi/spi-fsl-dspi.c
View File

@ -530,6 +530,7 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
goto err_rx_dma_buf;
}
memset(&cfg, 0, sizeof(cfg));
cfg.src_addr = phy_addr + SPI_POPR;
cfg.dst_addr = phy_addr + SPI_PUSHR;
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;

6
drivers/spi/spi-geni-qcom.c
View File

@ -549,12 +549,6 @@ static void setup_fifo_xfer(struct spi_transfer *xfer,
*/
spin_lock_irq(&mas->lock);
geni_se_setup_m_cmd(se, m_cmd, FRAGMENTATION);
/*
* TX_WATERMARK_REG should be set after SPI configuration and
* setting up GENI SE engine, as driver starts data transfer
* for the watermark interrupt.
*/
if (m_cmd & SPI_TX_ONLY) {
if (geni_spi_handle_tx(mas))
writel(mas->tx_wm, se->base + SE_GENI_TX_WATERMARK_REG);

21
drivers/spi/spi-imx.c
View File

@ -1052,12 +1052,8 @@ static void spi_imx_set_burst_len(struct spi_imx_data *spi_imx, int n_bits)
static void spi_imx_push(struct spi_imx_data *spi_imx)
{
unsigned int burst_len, fifo_words;
unsigned int burst_len;
if (spi_imx->dynamic_burst)
fifo_words = 4;
else
fifo_words = spi_imx_bytes_per_word(spi_imx->bits_per_word);
/*
* Reload the FIFO when the remaining bytes to be transferred in the
* current burst is 0. This only applies when bits_per_word is a
@ -1076,7 +1072,7 @@ static void spi_imx_push(struct spi_imx_data *spi_imx)
spi_imx->remainder = burst_len;
} else {
spi_imx->remainder = fifo_words;
spi_imx->remainder = spi_imx_bytes_per_word(spi_imx->bits_per_word);
}
}
@ -1084,8 +1080,7 @@ static void spi_imx_push(struct spi_imx_data *spi_imx)
if (!spi_imx->count)
break;
if (spi_imx->dynamic_burst &&
spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder,
fifo_words))
spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder, 4))
break;
spi_imx->tx(spi_imx);
spi_imx->txfifo++;
@ -1195,6 +1190,7 @@ static int spi_imx_setupxfer(struct spi_device *spi,
* dynamic_burst in that case.
*/
if (spi_imx->devtype_data->dynamic_burst && !spi_imx->slave_mode &&
!(spi->mode & SPI_CS_WORD) &&
(spi_imx->bits_per_word == 8 ||
spi_imx->bits_per_word == 16 ||
spi_imx->bits_per_word == 32)) {
@ -1630,6 +1626,15 @@ static int spi_imx_probe(struct platform_device *pdev)
is_imx53_ecspi(spi_imx))
spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY;
if (is_imx51_ecspi(spi_imx) &&
device_property_read_u32(&pdev->dev, "cs-gpios", NULL))
/*
* When using HW-CS implementing SPI_CS_WORD can be done by just
* setting the burst length to the word size. This is
* considerably faster than manually controlling the CS.
*/
spi_imx->bitbang.master->mode_bits |= SPI_CS_WORD;
spi_imx->spi_drctl = spi_drctl;
init_completion(&spi_imx->xfer_done);

159
drivers/spi/spi-mt65xx.c
View File

@ -42,8 +42,9 @@
#define SPI_CFG1_CS_IDLE_OFFSET 0
#define SPI_CFG1_PACKET_LOOP_OFFSET 8
#define SPI_CFG1_PACKET_LENGTH_OFFSET 16
#define SPI_CFG1_GET_TICK_DLY_OFFSET 30
#define SPI_CFG1_GET_TICK_DLY_OFFSET 29
#define SPI_CFG1_GET_TICK_DLY_MASK 0xe0000000
#define SPI_CFG1_CS_IDLE_MASK 0xff
#define SPI_CFG1_PACKET_LOOP_MASK 0xff00
#define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000
@ -90,6 +91,8 @@ struct mtk_spi_compatible {
bool enhance_timing;
/* some IC support DMA addr extension */
bool dma_ext;
/* some IC no need unprepare SPI clk */
bool no_need_unprepare;
};
struct mtk_spi {
@ -104,6 +107,7 @@ struct mtk_spi {
struct scatterlist *tx_sgl, *rx_sgl;
u32 tx_sgl_len, rx_sgl_len;
const struct mtk_spi_compatible *dev_comp;
u32 spi_clk_hz;
};
static const struct mtk_spi_compatible mtk_common_compat;
@ -135,12 +139,21 @@ static const struct mtk_spi_compatible mt8183_compat = {
.enhance_timing = true,
};
static const struct mtk_spi_compatible mt6893_compat = {
.need_pad_sel = true,
.must_tx = true,
.enhance_timing = true,
.dma_ext = true,
.no_need_unprepare = true,
};
/*
* A piece of default chip info unless the platform
* supplies it.
*/
static const struct mtk_chip_config mtk_default_chip_info = {
.sample_sel = 0,
.tick_delay = 0,
};
static const struct of_device_id mtk_spi_of_match[] = {
@ -174,6 +187,9 @@ static const struct of_device_id mtk_spi_of_match[] = {
{ .compatible = "mediatek,mt8192-spi",
.data = (void *)&mt6765_compat,
},
{ .compatible = "mediatek,mt6893-spi",
.data = (void *)&mt6893_compat,
},
{}
};
MODULE_DEVICE_TABLE(of, mtk_spi_of_match);
@ -192,6 +208,65 @@ static void mtk_spi_reset(struct mtk_spi *mdata)
writel(reg_val, mdata->base + SPI_CMD_REG);
}
static int mtk_spi_set_hw_cs_timing(struct spi_device *spi)
{
struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
struct spi_delay *cs_setup = &spi->cs_setup;
struct spi_delay *cs_hold = &spi->cs_hold;
struct spi_delay *cs_inactive = &spi->cs_inactive;
u32 setup, hold, inactive;
u32 reg_val;
int delay;
delay = spi_delay_to_ns(cs_setup, NULL);
if (delay < 0)
return delay;
setup = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
delay = spi_delay_to_ns(cs_hold, NULL);
if (delay < 0)
return delay;
hold = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
delay = spi_delay_to_ns(cs_inactive, NULL);
if (delay < 0)
return delay;
inactive = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
setup = setup ? setup : 1;
hold = hold ? hold : 1;
inactive = inactive ? inactive : 1;
reg_val = readl(mdata->base + SPI_CFG0_REG);
if (mdata->dev_comp->enhance_timing) {
hold = min_t(u32, hold, 0x10000);
setup = min_t(u32, setup, 0x10000);
reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
reg_val |= (((hold - 1) & 0xffff)
<< SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
reg_val |= (((setup - 1) & 0xffff)
<< SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
} else {
hold = min_t(u32, hold, 0x100);
setup = min_t(u32, setup, 0x100);
reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
reg_val |= (((setup - 1) & 0xff)
<< SPI_CFG0_CS_SETUP_OFFSET);
}
writel(reg_val, mdata->base + SPI_CFG0_REG);
inactive = min_t(u32, inactive, 0x100);
reg_val = readl(mdata->base + SPI_CFG1_REG);
reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
writel(reg_val, mdata->base + SPI_CFG1_REG);
return 0;
}
static int mtk_spi_prepare_message(struct spi_master *master,
struct spi_message *msg)
{
@ -261,6 +336,15 @@ static int mtk_spi_prepare_message(struct spi_master *master,
writel(mdata->pad_sel[spi->chip_select],
mdata->base + SPI_PAD_SEL_REG);
/* tick delay */
reg_val = readl(mdata->base + SPI_CFG1_REG);
reg_val &= ~SPI_CFG1_GET_TICK_DLY_MASK;
reg_val |= ((chip_config->tick_delay & 0x7)
<< SPI_CFG1_GET_TICK_DLY_OFFSET);
writel(reg_val, mdata->base + SPI_CFG1_REG);
/* set hw cs timing */
mtk_spi_set_hw_cs_timing(spi);
return 0;
}
@ -287,12 +371,11 @@ static void mtk_spi_set_cs(struct spi_device *spi, bool enable)
static void mtk_spi_prepare_transfer(struct spi_master *master,
struct spi_transfer *xfer)
{
u32 spi_clk_hz, div, sck_time, reg_val;
u32 div, sck_time, reg_val;
struct mtk_spi *mdata = spi_master_get_devdata(master);
spi_clk_hz = clk_get_rate(mdata->spi_clk);
if (xfer->speed_hz < spi_clk_hz / 2)
div = DIV_ROUND_UP(spi_clk_hz, xfer->speed_hz);
if (xfer->speed_hz < mdata->spi_clk_hz / 2)
div = DIV_ROUND_UP(mdata->spi_clk_hz, xfer->speed_hz);
else
div = 1;
@ -507,52 +590,6 @@ static bool mtk_spi_can_dma(struct spi_master *master,
(unsigned long)xfer->rx_buf % 4 == 0);
}
static int mtk_spi_set_hw_cs_timing(struct spi_device *spi,
struct spi_delay *setup,
struct spi_delay *hold,
struct spi_delay *inactive)
{
struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
u16 setup_dly, hold_dly, inactive_dly;
u32 reg_val;
if ((setup && setup->unit != SPI_DELAY_UNIT_SCK) ||
(hold && hold->unit != SPI_DELAY_UNIT_SCK) ||
(inactive && inactive->unit != SPI_DELAY_UNIT_SCK)) {
dev_err(&spi->dev,
"Invalid delay unit, should be SPI_DELAY_UNIT_SCK\n");
return -EINVAL;
}
setup_dly = setup ? setup->value : 1;
hold_dly = hold ? hold->value : 1;
inactive_dly = inactive ? inactive->value : 1;
reg_val = readl(mdata->base + SPI_CFG0_REG);
if (mdata->dev_comp->enhance_timing) {
reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
reg_val |= (((hold_dly - 1) & 0xffff)
<< SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
reg_val |= (((setup_dly - 1) & 0xffff)
<< SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
} else {
reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
reg_val |= (((hold_dly - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
reg_val |= (((setup_dly - 1) & 0xff)
<< SPI_CFG0_CS_SETUP_OFFSET);
}
writel(reg_val, mdata->base + SPI_CFG0_REG);
reg_val = readl(mdata->base + SPI_CFG1_REG);
reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
reg_val |= (((inactive_dly - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
writel(reg_val, mdata->base + SPI_CFG1_REG);
return 0;
}
static int mtk_spi_setup(struct spi_device *spi)
{
struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
@ -790,7 +827,12 @@ static int mtk_spi_probe(struct platform_device *pdev)
goto err_put_master;
}
clk_disable_unprepare(mdata->spi_clk);
mdata->spi_clk_hz = clk_get_rate(mdata->spi_clk);
if (mdata->dev_comp->no_need_unprepare)
clk_disable(mdata->spi_clk);
else
clk_disable_unprepare(mdata->spi_clk);
pm_runtime_enable(&pdev->dev);
@ -858,6 +900,9 @@ static int mtk_spi_remove(struct platform_device *pdev)
mtk_spi_reset(mdata);
if (mdata->dev_comp->no_need_unprepare)
clk_unprepare(mdata->spi_clk);
return 0;
}
@ -906,7 +951,10 @@ static int mtk_spi_runtime_suspend(struct device *dev)
struct spi_master *master = dev_get_drvdata(dev);
struct mtk_spi *mdata = spi_master_get_devdata(master);
clk_disable_unprepare(mdata->spi_clk);
if (mdata->dev_comp->no_need_unprepare)
clk_disable(mdata->spi_clk);
else
clk_disable_unprepare(mdata->spi_clk);
return 0;
}
@ -917,7 +965,10 @@ static int mtk_spi_runtime_resume(struct device *dev)
struct mtk_spi *mdata = spi_master_get_devdata(master);
int ret;
ret = clk_prepare_enable(mdata->spi_clk);
if (mdata->dev_comp->no_need_unprepare)
ret = clk_enable(mdata->spi_clk);
else
ret = clk_prepare_enable(mdata->spi_clk);
if (ret < 0) {
dev_err(dev, "failed to enable spi_clk (%d)\n", ret);
return ret;

44
drivers/spi/spi-mxic.c
View File

@ -335,8 +335,10 @@ static int mxic_spi_data_xfer(struct mxic_spi *mxic, const void *txbuf,
static bool mxic_spi_mem_supports_op(struct spi_mem *mem,
const struct spi_mem_op *op)
{
if (op->data.buswidth > 4 || op->addr.buswidth > 4 ||
op->dummy.buswidth > 4 || op->cmd.buswidth > 4)
bool all_false;
if (op->data.buswidth > 8 || op->addr.buswidth > 8 ||
op->dummy.buswidth > 8 || op->cmd.buswidth > 8)
return false;
if (op->data.nbytes && op->dummy.nbytes &&
@ -346,7 +348,13 @@ static bool mxic_spi_mem_supports_op(struct spi_mem *mem,
if (op->addr.nbytes > 7)
return false;
return spi_mem_default_supports_op(mem, op);
all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr &&
!op->data.dtr;
if (all_false)
return spi_mem_default_supports_op(mem, op);
else
return spi_mem_dtr_supports_op(mem, op);
}
static int mxic_spi_mem_exec_op(struct spi_mem *mem,
@ -355,14 +363,15 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
struct mxic_spi *mxic = spi_master_get_devdata(mem->spi->master);
int nio = 1, i, ret;
u32 ss_ctrl;
u8 addr[8];
u8 opcode = op->cmd.opcode;
u8 addr[8], cmd[2];
ret = mxic_spi_set_freq(mxic, mem->spi->max_speed_hz);
if (ret)
return ret;
if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD))
if (mem->spi->mode & (SPI_TX_OCTAL | SPI_RX_OCTAL))
nio = 8;
else if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD))
nio = 4;
else if (mem->spi->mode & (SPI_TX_DUAL | SPI_RX_DUAL))
nio = 2;
@ -374,19 +383,26 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
mxic->regs + HC_CFG);
writel(HC_EN_BIT, mxic->regs + HC_EN);
ss_ctrl = OP_CMD_BYTES(1) | OP_CMD_BUSW(fls(op->cmd.buswidth) - 1);
ss_ctrl = OP_CMD_BYTES(op->cmd.nbytes) |
OP_CMD_BUSW(fls(op->cmd.buswidth) - 1) |
(op->cmd.dtr ? OP_CMD_DDR : 0);
if (op->addr.nbytes)
ss_ctrl |= OP_ADDR_BYTES(op->addr.nbytes) |
OP_ADDR_BUSW(fls(op->addr.buswidth) - 1);
OP_ADDR_BUSW(fls(op->addr.buswidth) - 1) |
(op->addr.dtr ? OP_ADDR_DDR : 0);
if (op->dummy.nbytes)
ss_ctrl |= OP_DUMMY_CYC(op->dummy.nbytes);
if (op->data.nbytes) {
ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1);
if (op->data.dir == SPI_MEM_DATA_IN)
ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1) |
(op->data.dtr ? OP_DATA_DDR : 0);
if (op->data.dir == SPI_MEM_DATA_IN) {
ss_ctrl |= OP_READ;
if (op->data.dtr)
ss_ctrl |= OP_DQS_EN;
}
}
writel(ss_ctrl, mxic->regs + SS_CTRL(mem->spi->chip_select));
@ -394,7 +410,10 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT,
mxic->regs + HC_CFG);
ret = mxic_spi_data_xfer(mxic, &opcode, NULL, 1);
for (i = 0; i < op->cmd.nbytes; i++)
cmd[i] = op->cmd.opcode >> (8 * (op->cmd.nbytes - i - 1));
ret = mxic_spi_data_xfer(mxic, cmd, NULL, op->cmd.nbytes);
if (ret)
goto out;
@ -567,7 +586,8 @@ static int mxic_spi_probe(struct platform_device *pdev)
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->mode_bits = SPI_CPOL | SPI_CPHA |
SPI_RX_DUAL | SPI_TX_DUAL |
SPI_RX_QUAD | SPI_TX_QUAD;
SPI_RX_QUAD | SPI_TX_QUAD |
SPI_RX_OCTAL | SPI_TX_OCTAL;
mxic_spi_hw_init(mxic);

1
drivers/spi/spi-pic32.c
View File

@ -361,6 +361,7 @@ static int pic32_spi_dma_config(struct pic32_spi *pic32s, u32 dma_width)
struct dma_slave_config cfg;
int ret;
memset(&cfg, 0, sizeof(cfg));
cfg.device_fc = true;
cfg.src_addr = pic32s->dma_base + buf_offset;
cfg.dst_addr = pic32s->dma_base + buf_offset;

35
drivers/spi/spi-pxa2xx.c
View File

@ -594,24 +594,29 @@ static int u32_reader(struct driver_data *drv_data)
static void reset_sccr1(struct driver_data *drv_data)
{
struct chip_data *chip =
spi_get_ctldata(drv_data->controller->cur_msg->spi);
u32 sccr1_reg;
u32 mask = drv_data->int_cr1 | drv_data->dma_cr1, threshold;
struct chip_data *chip;
if (drv_data->controller->cur_msg) {
chip = spi_get_ctldata(drv_data->controller->cur_msg->spi);
threshold = chip->threshold;
} else {
threshold = 0;
}
sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1) & ~drv_data->int_cr1;
switch (drv_data->ssp_type) {
case QUARK_X1000_SSP:
sccr1_reg &= ~QUARK_X1000_SSCR1_RFT;
mask |= QUARK_X1000_SSCR1_RFT;
break;
case CE4100_SSP:
sccr1_reg &= ~CE4100_SSCR1_RFT;
mask |= CE4100_SSCR1_RFT;
break;
default:
sccr1_reg &= ~SSCR1_RFT;
mask |= SSCR1_RFT;
break;
}
sccr1_reg |= chip->threshold;
pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg);
pxa2xx_spi_update(drv_data, SSCR1, mask, threshold);
}
static void int_stop_and_reset(struct driver_data *drv_data)
@ -724,11 +729,8 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
static void handle_bad_msg(struct driver_data *drv_data)
{
int_stop_and_reset(drv_data);
pxa2xx_spi_off(drv_data);
clear_SSCR1_bits(drv_data, drv_data->int_cr1);
if (!pxa25x_ssp_comp(drv_data))
pxa2xx_spi_write(drv_data, SSTO, 0);
write_SSSR_CS(drv_data, drv_data->clear_sr);
dev_err(drv_data->ssp->dev, "bad message state in interrupt handler\n");
}
@ -1156,13 +1158,10 @@ static void pxa2xx_spi_handle_err(struct spi_controller *controller,
{
struct driver_data *drv_data = spi_controller_get_devdata(controller);
int_stop_and_reset(drv_data);
/* Disable the SSP */
pxa2xx_spi_off(drv_data);
/* Clear and disable interrupts and service requests */
write_SSSR_CS(drv_data, drv_data->clear_sr);
clear_SSCR1_bits(drv_data, drv_data->int_cr1 | drv_data->dma_cr1);
if (!pxa25x_ssp_comp(drv_data))
pxa2xx_spi_write(drv_data, SSTO, 0);
/*
* Stop the DMA if running. Note DMA callback handler may have unset

694
drivers/spi/spi-rockchip-sfc.c Normal file
View File

@ -0,0 +1,694 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Rockchip Serial Flash Controller Driver
*
* Copyright (c) 2017-2021, Rockchip Inc.
* Author: Shawn Lin <shawn.lin@rock-chips.com>
* Chris Morgan <macroalpha82@gmail.com>
* Jon Lin <Jon.lin@rock-chips.com>
*/
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/dma-mapping.h>
#include <linux/iopoll.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/spi/spi-mem.h>
/* System control */
#define SFC_CTRL 0x0
#define SFC_CTRL_PHASE_SEL_NEGETIVE BIT(1)
#define SFC_CTRL_CMD_BITS_SHIFT 8
#define SFC_CTRL_ADDR_BITS_SHIFT 10
#define SFC_CTRL_DATA_BITS_SHIFT 12
/* Interrupt mask */
#define SFC_IMR 0x4
#define SFC_IMR_RX_FULL BIT(0)
#define SFC_IMR_RX_UFLOW BIT(1)
#define SFC_IMR_TX_OFLOW BIT(2)
#define SFC_IMR_TX_EMPTY BIT(3)
#define SFC_IMR_TRAN_FINISH BIT(4)
#define SFC_IMR_BUS_ERR BIT(5)
#define SFC_IMR_NSPI_ERR BIT(6)
#define SFC_IMR_DMA BIT(7)
/* Interrupt clear */
#define SFC_ICLR 0x8
#define SFC_ICLR_RX_FULL BIT(0)
#define SFC_ICLR_RX_UFLOW BIT(1)
#define SFC_ICLR_TX_OFLOW BIT(2)
#define SFC_ICLR_TX_EMPTY BIT(3)
#define SFC_ICLR_TRAN_FINISH BIT(4)
#define SFC_ICLR_BUS_ERR BIT(5)
#define SFC_ICLR_NSPI_ERR BIT(6)
#define SFC_ICLR_DMA BIT(7)
/* FIFO threshold level */
#define SFC_FTLR 0xc
#define SFC_FTLR_TX_SHIFT 0
#define SFC_FTLR_TX_MASK 0x1f
#define SFC_FTLR_RX_SHIFT 8
#define SFC_FTLR_RX_MASK 0x1f
/* Reset FSM and FIFO */
#define SFC_RCVR 0x10
#define SFC_RCVR_RESET BIT(0)
/* Enhanced mode */
#define SFC_AX 0x14
/* Address Bit number */
#define SFC_ABIT 0x18
/* Interrupt status */
#define SFC_ISR 0x1c
#define SFC_ISR_RX_FULL_SHIFT BIT(0)
#define SFC_ISR_RX_UFLOW_SHIFT BIT(1)
#define SFC_ISR_TX_OFLOW_SHIFT BIT(2)
#define SFC_ISR_TX_EMPTY_SHIFT BIT(3)
#define SFC_ISR_TX_FINISH_SHIFT BIT(4)
#define SFC_ISR_BUS_ERR_SHIFT BIT(5)
#define SFC_ISR_NSPI_ERR_SHIFT BIT(6)
#define SFC_ISR_DMA_SHIFT BIT(7)
/* FIFO status */
#define SFC_FSR 0x20
#define SFC_FSR_TX_IS_FULL BIT(0)
#define SFC_FSR_TX_IS_EMPTY BIT(1)
#define SFC_FSR_RX_IS_EMPTY BIT(2)
#define SFC_FSR_RX_IS_FULL BIT(3)
#define SFC_FSR_TXLV_MASK GENMASK(12, 8)
#define SFC_FSR_TXLV_SHIFT 8
#define SFC_FSR_RXLV_MASK GENMASK(20, 16)
#define SFC_FSR_RXLV_SHIFT 16
/* FSM status */
#define SFC_SR 0x24
#define SFC_SR_IS_IDLE 0x0
#define SFC_SR_IS_BUSY 0x1
/* Raw interrupt status */
#define SFC_RISR 0x28
#define SFC_RISR_RX_FULL BIT(0)
#define SFC_RISR_RX_UNDERFLOW BIT(1)
#define SFC_RISR_TX_OVERFLOW BIT(2)
#define SFC_RISR_TX_EMPTY BIT(3)
#define SFC_RISR_TRAN_FINISH BIT(4)
#define SFC_RISR_BUS_ERR BIT(5)
#define SFC_RISR_NSPI_ERR BIT(6)
#define SFC_RISR_DMA BIT(7)
/* Version */
#define SFC_VER 0x2C
#define SFC_VER_3 0x3
#define SFC_VER_4 0x4
#define SFC_VER_5 0x5
/* Delay line controller resiter */
#define SFC_DLL_CTRL0 0x3C
#define SFC_DLL_CTRL0_SCLK_SMP_DLL BIT(15)
#define SFC_DLL_CTRL0_DLL_MAX_VER4 0xFFU
#define SFC_DLL_CTRL0_DLL_MAX_VER5 0x1FFU
/* Master trigger */
#define SFC_DMA_TRIGGER 0x80
#define SFC_DMA_TRIGGER_START 1
/* Src or Dst addr for master */
#define SFC_DMA_ADDR 0x84
/* Length control register extension 32GB */
#define SFC_LEN_CTRL 0x88
#define SFC_LEN_CTRL_TRB_SEL 1
#define SFC_LEN_EXT 0x8C
/* Command */
#define SFC_CMD 0x100
#define SFC_CMD_IDX_SHIFT 0
#define SFC_CMD_DUMMY_SHIFT 8
#define SFC_CMD_DIR_SHIFT 12
#define SFC_CMD_DIR_RD 0
#define SFC_CMD_DIR_WR 1
#define SFC_CMD_ADDR_SHIFT 14
#define SFC_CMD_ADDR_0BITS 0
#define SFC_CMD_ADDR_24BITS 1
#define SFC_CMD_ADDR_32BITS 2
#define SFC_CMD_ADDR_XBITS 3
#define SFC_CMD_TRAN_BYTES_SHIFT 16
#define SFC_CMD_CS_SHIFT 30
/* Address */
#define SFC_ADDR 0x104
/* Data */
#define SFC_DATA 0x108
/* The controller and documentation reports that it supports up to 4 CS
* devices (0-3), however I have only been able to test a single CS (CS 0)
* due to the configuration of my device.
*/
#define SFC_MAX_CHIPSELECT_NUM 4
/* The SFC can transfer max 16KB - 1 at one time
* we set it to 15.5KB here for alignment.
*/
#define SFC_MAX_IOSIZE_VER3 (512 * 31)
/* DMA is only enabled for large data transmission */
#define SFC_DMA_TRANS_THRETHOLD (0x40)
/* Maximum clock values from datasheet suggest keeping clock value under
* 150MHz. No minimum or average value is suggested.
*/
#define SFC_MAX_SPEED (150 * 1000 * 1000)
struct rockchip_sfc {
struct device *dev;
void __iomem *regbase;
struct clk *hclk;
struct clk *clk;
u32 frequency;
/* virtual mapped addr for dma_buffer */
void *buffer;
dma_addr_t dma_buffer;
struct completion cp;
bool use_dma;
u32 max_iosize;
u16 version;
};
static int rockchip_sfc_reset(struct rockchip_sfc *sfc)
{
int err;
u32 status;
writel_relaxed(SFC_RCVR_RESET, sfc->regbase + SFC_RCVR);
err = readl_poll_timeout(sfc->regbase + SFC_RCVR, status,
!(status & SFC_RCVR_RESET), 20,
jiffies_to_usecs(HZ));
if (err)
dev_err(sfc->dev, "SFC reset never finished\n");
/* Still need to clear the masked interrupt from RISR */
writel_relaxed(0xFFFFFFFF, sfc->regbase + SFC_ICLR);
dev_dbg(sfc->dev, "reset\n");
return err;
}
static u16 rockchip_sfc_get_version(struct rockchip_sfc *sfc)
{
return (u16)(readl(sfc->regbase + SFC_VER) & 0xffff);
}
static u32 rockchip_sfc_get_max_iosize(struct rockchip_sfc *sfc)
{
return SFC_MAX_IOSIZE_VER3;
}
static void rockchip_sfc_irq_unmask(struct rockchip_sfc *sfc, u32 mask)
{
u32 reg;
/* Enable transfer complete interrupt */
reg = readl(sfc->regbase + SFC_IMR);
reg &= ~mask;
writel(reg, sfc->regbase + SFC_IMR);
}
static void rockchip_sfc_irq_mask(struct rockchip_sfc *sfc, u32 mask)
{
u32 reg;
/* Disable transfer finish interrupt */
reg = readl(sfc->regbase + SFC_IMR);
reg |= mask;
writel(reg, sfc->regbase + SFC_IMR);
}
static int rockchip_sfc_init(struct rockchip_sfc *sfc)
{
writel(0, sfc->regbase + SFC_CTRL);
writel(0xFFFFFFFF, sfc->regbase + SFC_ICLR);
rockchip_sfc_irq_mask(sfc, 0xFFFFFFFF);
if (rockchip_sfc_get_version(sfc) >= SFC_VER_4)
writel(SFC_LEN_CTRL_TRB_SEL, sfc->regbase + SFC_LEN_CTRL);
return 0;
}
static int rockchip_sfc_wait_txfifo_ready(struct rockchip_sfc *sfc, u32 timeout_us)
{
int ret = 0;
u32 status;
ret = readl_poll_timeout(sfc->regbase + SFC_FSR, status,
status & SFC_FSR_TXLV_MASK, 0,
timeout_us);
if (ret) {
dev_dbg(sfc->dev, "sfc wait tx fifo timeout\n");
return -ETIMEDOUT;
}
return (status & SFC_FSR_TXLV_MASK) >> SFC_FSR_TXLV_SHIFT;
}
static int rockchip_sfc_wait_rxfifo_ready(struct rockchip_sfc *sfc, u32 timeout_us)
{
int ret = 0;
u32 status;
ret = readl_poll_timeout(sfc->regbase + SFC_FSR, status,
status & SFC_FSR_RXLV_MASK, 0,
timeout_us);
if (ret) {
dev_dbg(sfc->dev, "sfc wait rx fifo timeout\n");
return -ETIMEDOUT;
}
return (status & SFC_FSR_RXLV_MASK) >> SFC_FSR_RXLV_SHIFT;
}
static void rockchip_sfc_adjust_op_work(struct spi_mem_op *op)
{
if (unlikely(op->dummy.nbytes && !op->addr.nbytes)) {
/*
* SFC not support output DUMMY cycles right after CMD cycles, so
* treat it as ADDR cycles.
*/
op->addr.nbytes = op->dummy.nbytes;
op->addr.buswidth = op->dummy.buswidth;
op->addr.val = 0xFFFFFFFFF;
op->dummy.nbytes = 0;
}
}
static int rockchip_sfc_xfer_setup(struct rockchip_sfc *sfc,
struct spi_mem *mem,
const struct spi_mem_op *op,
u32 len)
{
u32 ctrl = 0, cmd = 0;
/* set CMD */
cmd = op->cmd.opcode;
ctrl |= ((op->cmd.buswidth >> 1) << SFC_CTRL_CMD_BITS_SHIFT);
/* set ADDR */
if (op->addr.nbytes) {
if (op->addr.nbytes == 4) {
cmd |= SFC_CMD_ADDR_32BITS << SFC_CMD_ADDR_SHIFT;
} else if (op->addr.nbytes == 3) {
cmd |= SFC_CMD_ADDR_24BITS << SFC_CMD_ADDR_SHIFT;
} else {
cmd |= SFC_CMD_ADDR_XBITS << SFC_CMD_ADDR_SHIFT;
writel(op->addr.nbytes * 8 - 1, sfc->regbase + SFC_ABIT);
}
ctrl |= ((op->addr.buswidth >> 1) << SFC_CTRL_ADDR_BITS_SHIFT);
}
/* set DUMMY */
if (op->dummy.nbytes) {
if (op->dummy.buswidth == 4)
cmd |= op->dummy.nbytes * 2 << SFC_CMD_DUMMY_SHIFT;
else if (op->dummy.buswidth == 2)
cmd |= op->dummy.nbytes * 4 << SFC_CMD_DUMMY_SHIFT;
else
cmd |= op->dummy.nbytes * 8 << SFC_CMD_DUMMY_SHIFT;
}
/* set DATA */
if (sfc->version >= SFC_VER_4) /* Clear it if no data to transfer */
writel(len, sfc->regbase + SFC_LEN_EXT);
else
cmd |= len << SFC_CMD_TRAN_BYTES_SHIFT;
if (len) {
if (op->data.dir == SPI_MEM_DATA_OUT)
cmd |= SFC_CMD_DIR_WR << SFC_CMD_DIR_SHIFT;
ctrl |= ((op->data.buswidth >> 1) << SFC_CTRL_DATA_BITS_SHIFT);
}
if (!len && op->addr.nbytes)
cmd |= SFC_CMD_DIR_WR << SFC_CMD_DIR_SHIFT;
/* set the Controller */
ctrl |= SFC_CTRL_PHASE_SEL_NEGETIVE;
cmd |= mem->spi->chip_select << SFC_CMD_CS_SHIFT;
dev_dbg(sfc->dev, "sfc addr.nbytes=%x(x%d) dummy.nbytes=%x(x%d)\n",
op->addr.nbytes, op->addr.buswidth,
op->dummy.nbytes, op->dummy.buswidth);
dev_dbg(sfc->dev, "sfc ctrl=%x cmd=%x addr=%llx len=%x\n",
ctrl, cmd, op->addr.val, len);
writel(ctrl, sfc->regbase + SFC_CTRL);
writel(cmd, sfc->regbase + SFC_CMD);
if (op->addr.nbytes)
writel(op->addr.val, sfc->regbase + SFC_ADDR);
return 0;
}
static int rockchip_sfc_write_fifo(struct rockchip_sfc *sfc, const u8 *buf, int len)
{
u8 bytes = len & 0x3;
u32 dwords;
int tx_level;
u32 write_words;
u32 tmp = 0;
dwords = len >> 2;
while (dwords) {
tx_level = rockchip_sfc_wait_txfifo_ready(sfc, 1000);
if (tx_level < 0)
return tx_level;
write_words = min_t(u32, tx_level, dwords);
iowrite32_rep(sfc->regbase + SFC_DATA, buf, write_words);
buf += write_words << 2;
dwords -= write_words;
}
/* write the rest non word aligned bytes */
if (bytes) {
tx_level = rockchip_sfc_wait_txfifo_ready(sfc, 1000);
if (tx_level < 0)
return tx_level;
memcpy(&tmp, buf, bytes);
writel(tmp, sfc->regbase + SFC_DATA);
}
return len;
}
static int rockchip_sfc_read_fifo(struct rockchip_sfc *sfc, u8 *buf, int len)
{
u8 bytes = len & 0x3;
u32 dwords;
u8 read_words;
int rx_level;
int tmp;
/* word aligned access only */
dwords = len >> 2;
while (dwords) {
rx_level = rockchip_sfc_wait_rxfifo_ready(sfc, 1000);
if (rx_level < 0)
return rx_level;
read_words = min_t(u32, rx_level, dwords);
ioread32_rep(sfc->regbase + SFC_DATA, buf, read_words);
buf += read_words << 2;
dwords -= read_words;
}
/* read the rest non word aligned bytes */
if (bytes) {
rx_level = rockchip_sfc_wait_rxfifo_ready(sfc, 1000);
if (rx_level < 0)
return rx_level;
tmp = readl(sfc->regbase + SFC_DATA);
memcpy(buf, &tmp, bytes);
}
return len;
}
static int rockchip_sfc_fifo_transfer_dma(struct rockchip_sfc *sfc, dma_addr_t dma_buf, size_t len)
{
writel(0xFFFFFFFF, sfc->regbase + SFC_ICLR);
writel((u32)dma_buf, sfc->regbase + SFC_DMA_ADDR);
writel(SFC_DMA_TRIGGER_START, sfc->regbase + SFC_DMA_TRIGGER);
return len;
}
static int rockchip_sfc_xfer_data_poll(struct rockchip_sfc *sfc,
const struct spi_mem_op *op, u32 len)
{
dev_dbg(sfc->dev, "sfc xfer_poll len=%x\n", len);
if (op->data.dir == SPI_MEM_DATA_OUT)
return rockchip_sfc_write_fifo(sfc, op->data.buf.out, len);
else
return rockchip_sfc_read_fifo(sfc, op->data.buf.in, len);
}
static int rockchip_sfc_xfer_data_dma(struct rockchip_sfc *sfc,
const struct spi_mem_op *op, u32 len)
{
int ret;
dev_dbg(sfc->dev, "sfc xfer_dma len=%x\n", len);
if (op->data.dir == SPI_MEM_DATA_OUT)
memcpy(sfc->buffer, op->data.buf.out, len);
ret = rockchip_sfc_fifo_transfer_dma(sfc, sfc->dma_buffer, len);
if (!wait_for_completion_timeout(&sfc->cp, msecs_to_jiffies(2000))) {
dev_err(sfc->dev, "DMA wait for transfer finish timeout\n");
ret = -ETIMEDOUT;
}
rockchip_sfc_irq_mask(sfc, SFC_IMR_DMA);
if (op->data.dir == SPI_MEM_DATA_IN)
memcpy(op->data.buf.in, sfc->buffer, len);
return ret;
}
static int rockchip_sfc_xfer_done(struct rockchip_sfc *sfc, u32 timeout_us)
{
int ret = 0;
u32 status;
ret = readl_poll_timeout(sfc->regbase + SFC_SR, status,
!(status & SFC_SR_IS_BUSY),
20, timeout_us);
if (ret) {
dev_err(sfc->dev, "wait sfc idle timeout\n");
rockchip_sfc_reset(sfc);
ret = -EIO;
}
return ret;
}
static int rockchip_sfc_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
{
struct rockchip_sfc *sfc = spi_master_get_devdata(mem->spi->master);
u32 len = op->data.nbytes;
int ret;
if (unlikely(mem->spi->max_speed_hz != sfc->frequency)) {
ret = clk_set_rate(sfc->clk, mem->spi->max_speed_hz);
if (ret)
return ret;
sfc->frequency = mem->spi->max_speed_hz;
dev_dbg(sfc->dev, "set_freq=%dHz real_freq=%ldHz\n",
sfc->frequency, clk_get_rate(sfc->clk));
}
rockchip_sfc_adjust_op_work((struct spi_mem_op *)op);
rockchip_sfc_xfer_setup(sfc, mem, op, len);
if (len) {
if (likely(sfc->use_dma) && len >= SFC_DMA_TRANS_THRETHOLD) {
init_completion(&sfc->cp);
rockchip_sfc_irq_unmask(sfc, SFC_IMR_DMA);
ret = rockchip_sfc_xfer_data_dma(sfc, op, len);
} else {
ret = rockchip_sfc_xfer_data_poll(sfc, op, len);
}
if (ret != len) {
dev_err(sfc->dev, "xfer data failed ret %d dir %d\n", ret, op->data.dir);
return -EIO;
}
}
return rockchip_sfc_xfer_done(sfc, 100000);
}
static int rockchip_sfc_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
{
struct rockchip_sfc *sfc = spi_master_get_devdata(mem->spi->master);
op->data.nbytes = min(op->data.nbytes, sfc->max_iosize);
return 0;
}
static const struct spi_controller_mem_ops rockchip_sfc_mem_ops = {
.exec_op = rockchip_sfc_exec_mem_op,
.adjust_op_size = rockchip_sfc_adjust_op_size,
};
static irqreturn_t rockchip_sfc_irq_handler(int irq, void *dev_id)
{
struct rockchip_sfc *sfc = dev_id;
u32 reg;
reg = readl(sfc->regbase + SFC_RISR);
/* Clear interrupt */
writel_relaxed(reg, sfc->regbase + SFC_ICLR);
if (reg & SFC_RISR_DMA) {
complete(&sfc->cp);
return IRQ_HANDLED;
}
return IRQ_NONE;
}
static int rockchip_sfc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct spi_master *master;
struct resource *res;
struct rockchip_sfc *sfc;
int ret;
master = devm_spi_alloc_master(&pdev->dev, sizeof(*sfc));
if (!master)
return -ENOMEM;
master->flags = SPI_MASTER_HALF_DUPLEX;
master->mem_ops = &rockchip_sfc_mem_ops;
master->dev.of_node = pdev->dev.of_node;
master->mode_bits = SPI_TX_QUAD | SPI_TX_DUAL | SPI_RX_QUAD | SPI_RX_DUAL;
master->max_speed_hz = SFC_MAX_SPEED;
master->num_chipselect = SFC_MAX_CHIPSELECT_NUM;
sfc = spi_master_get_devdata(master);
sfc->dev = dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
sfc->regbase = devm_ioremap_resource(dev, res);
if (IS_ERR(sfc->regbase))
return PTR_ERR(sfc->regbase);
sfc->clk = devm_clk_get(&pdev->dev, "clk_sfc");
if (IS_ERR(sfc->clk)) {
dev_err(&pdev->dev, "Failed to get sfc interface clk\n");
return PTR_ERR(sfc->clk);
}
sfc->hclk = devm_clk_get(&pdev->dev, "hclk_sfc");
if (IS_ERR(sfc->hclk)) {
dev_err(&pdev->dev, "Failed to get sfc ahb clk\n");
return PTR_ERR(sfc->hclk);
}
sfc->use_dma = !of_property_read_bool(sfc->dev->of_node,
"rockchip,sfc-no-dma");
if (sfc->use_dma) {
ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
if (ret) {
dev_warn(dev, "Unable to set dma mask\n");
return ret;
}
sfc->buffer = dmam_alloc_coherent(dev, SFC_MAX_IOSIZE_VER3,
&sfc->dma_buffer,
GFP_KERNEL);
if (!sfc->buffer)
return -ENOMEM;
}
ret = clk_prepare_enable(sfc->hclk);
if (ret) {
dev_err(&pdev->dev, "Failed to enable ahb clk\n");
goto err_hclk;
}
ret = clk_prepare_enable(sfc->clk);
if (ret) {
dev_err(&pdev->dev, "Failed to enable interface clk\n");
goto err_clk;
}
/* Find the irq */
ret = platform_get_irq(pdev, 0);
if (ret < 0) {
dev_err(dev, "Failed to get the irq\n");
goto err_irq;
}
ret = devm_request_irq(dev, ret, rockchip_sfc_irq_handler,
0, pdev->name, sfc);
if (ret) {
dev_err(dev, "Failed to request irq\n");
return ret;
}
ret = rockchip_sfc_init(sfc);
if (ret)
goto err_irq;
sfc->max_iosize = rockchip_sfc_get_max_iosize(sfc);
sfc->version = rockchip_sfc_get_version(sfc);
ret = spi_register_master(master);
if (ret)
goto err_irq;
return 0;
err_irq:
clk_disable_unprepare(sfc->clk);
err_clk:
clk_disable_unprepare(sfc->hclk);
err_hclk:
return ret;
}
static int rockchip_sfc_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
struct rockchip_sfc *sfc = platform_get_drvdata(pdev);
spi_unregister_master(master);
clk_disable_unprepare(sfc->clk);
clk_disable_unprepare(sfc->hclk);
return 0;
}
static const struct of_device_id rockchip_sfc_dt_ids[] = {
{ .compatible = "rockchip,sfc"},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, rockchip_sfc_dt_ids);
static struct platform_driver rockchip_sfc_driver = {
.driver = {
.name = "rockchip-sfc",
.of_match_table = rockchip_sfc_dt_ids,
},
.probe = rockchip_sfc_probe,
.remove = rockchip_sfc_remove,
};
module_platform_driver(rockchip_sfc_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Rockchip Serial Flash Controller Driver");
MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>");
MODULE_AUTHOR("Chris Morgan <macromorgan@hotmail.com>");
MODULE_AUTHOR("Jon Lin <Jon.lin@rock-chips.com>");

287
drivers/spi/spi-sprd-adi.c
View File

@ -52,10 +52,20 @@
/*
* ADI slave devices include RTC, ADC, regulator, charger, thermal and so on.
* The slave devices address offset is always 0x8000 and size is 4K.
* ADI supports 12/14bit address for r2p0, and additional 17bit for r3p0 or
* later versions. Since bit[1:0] are zero, so the spec describe them as
* 10/12/15bit address mode.
* The 10bit mode supports sigle slave, 12/15bit mode supports 3 slave, the
* high two bits is slave_id.
* The slave devices address offset is 0x8000 for 10/12bit address mode,
* and 0x20000 for 15bit mode.
*/
#define ADI_SLAVE_ADDR_SIZE SZ_4K
#define ADI_SLAVE_OFFSET 0x8000
#define ADI_10BIT_SLAVE_ADDR_SIZE SZ_4K
#define ADI_10BIT_SLAVE_OFFSET 0x8000
#define ADI_12BIT_SLAVE_ADDR_SIZE SZ_16K
#define ADI_12BIT_SLAVE_OFFSET 0x8000
#define ADI_15BIT_SLAVE_ADDR_SIZE SZ_128K
#define ADI_15BIT_SLAVE_OFFSET 0x20000
/* Timeout (ms) for the trylock of hardware spinlocks */
#define ADI_HWSPINLOCK_TIMEOUT 5000
@ -67,24 +77,35 @@
#define ADI_FIFO_DRAIN_TIMEOUT 1000
#define ADI_READ_TIMEOUT 2000
#define REG_ADDR_LOW_MASK GENMASK(11, 0)
/*
* Read back address from REG_ADI_RD_DATA bit[30:16] which maps to:
* REG_ADI_RD_CMD bit[14:0] for r2p0
* REG_ADI_RD_CMD bit[16:2] for r3p0
*/
#define RDBACK_ADDR_MASK_R2 GENMASK(14, 0)
#define RDBACK_ADDR_MASK_R3 GENMASK(16, 2)
#define RDBACK_ADDR_SHIFT_R3 2
/* Registers definitions for PMIC watchdog controller */
#define REG_WDG_LOAD_LOW 0x80
#define REG_WDG_LOAD_HIGH 0x84
#define REG_WDG_CTRL 0x88
#define REG_WDG_LOCK 0xa0
#define REG_WDG_LOAD_LOW 0x0
#define REG_WDG_LOAD_HIGH 0x4
#define REG_WDG_CTRL 0x8
#define REG_WDG_LOCK 0x20
/* Bits definitions for register REG_WDG_CTRL */
#define BIT_WDG_RUN BIT(1)
#define BIT_WDG_NEW BIT(2)
#define BIT_WDG_RST BIT(3)
/* Bits definitions for register REG_MODULE_EN */
#define BIT_WDG_EN BIT(2)
/* Registers definitions for PMIC */
#define PMIC_RST_STATUS 0xee8
#define PMIC_MODULE_EN 0xc08
#define PMIC_CLK_EN 0xc18
#define BIT_WDG_EN BIT(2)
#define PMIC_WDG_BASE 0x80
/* Definition of PMIC reset status register */
#define HWRST_STATUS_SECURITY 0x02
@ -103,10 +124,26 @@
#define HWRST_STATUS_WATCHDOG 0xf0
/* Use default timeout 50 ms that converts to watchdog values */
#define WDG_LOAD_VAL ((50 * 1000) / 32768)
#define WDG_LOAD_VAL ((50 * 32768) / 1000)
#define WDG_LOAD_MASK GENMASK(15, 0)
#define WDG_UNLOCK_KEY 0xe551
struct sprd_adi_wdg {
u32 base;
u32 rst_sts;
u32 wdg_en;
u32 wdg_clk;
};
struct sprd_adi_data {
u32 slave_offset;
u32 slave_addr_size;
int (*read_check)(u32 val, u32 reg);
int (*restart)(struct notifier_block *this,
unsigned long mode, void *cmd);
void (*wdg_rst)(void *p);
};
struct sprd_adi {
struct spi_controller *ctlr;
struct device *dev;
@ -115,26 +152,21 @@ struct sprd_adi {
unsigned long slave_vbase;
unsigned long slave_pbase;
struct notifier_block restart_handler;
const struct sprd_adi_data *data;
};
static int sprd_adi_check_paddr(struct sprd_adi *sadi, u32 paddr)
static int sprd_adi_check_addr(struct sprd_adi *sadi, u32 reg)
{
if (paddr < sadi->slave_pbase || paddr >
(sadi->slave_pbase + ADI_SLAVE_ADDR_SIZE)) {
if (reg >= sadi->data->slave_addr_size) {
dev_err(sadi->dev,
"slave physical address is incorrect, addr = 0x%x\n",
paddr);
"slave address offset is incorrect, reg = 0x%x\n",
reg);
return -EINVAL;
}
return 0;
}
static unsigned long sprd_adi_to_vaddr(struct sprd_adi *sadi, u32 paddr)
{
return (paddr - sadi->slave_pbase + sadi->slave_vbase);
}
static int sprd_adi_drain_fifo(struct sprd_adi *sadi)
{
u32 timeout = ADI_FIFO_DRAIN_TIMEOUT;
@ -161,11 +193,35 @@ static int sprd_adi_fifo_is_full(struct sprd_adi *sadi)
return readl_relaxed(sadi->base + REG_ADI_ARM_FIFO_STS) & BIT_FIFO_FULL;
}
static int sprd_adi_read(struct sprd_adi *sadi, u32 reg_paddr, u32 *read_val)
static int sprd_adi_read_check(u32 val, u32 addr)
{
u32 rd_addr;
rd_addr = (val & RD_ADDR_MASK) >> RD_ADDR_SHIFT;
if (rd_addr != addr) {
pr_err("ADI read error, addr = 0x%x, val = 0x%x\n", addr, val);
return -EIO;
}
return 0;
}
static int sprd_adi_read_check_r2(u32 val, u32 reg)
{
return sprd_adi_read_check(val, reg & RDBACK_ADDR_MASK_R2);
}
static int sprd_adi_read_check_r3(u32 val, u32 reg)
{
return sprd_adi_read_check(val, (reg & RDBACK_ADDR_MASK_R3) >> RDBACK_ADDR_SHIFT_R3);
}
static int sprd_adi_read(struct sprd_adi *sadi, u32 reg, u32 *read_val)
{
int read_timeout = ADI_READ_TIMEOUT;
unsigned long flags;
u32 val, rd_addr;
u32 val;
int ret = 0;
if (sadi->hwlock) {
@ -178,11 +234,15 @@ static int sprd_adi_read(struct sprd_adi *sadi, u32 reg_paddr, u32 *read_val)
}
}
ret = sprd_adi_check_addr(sadi, reg);
if (ret)
goto out;
/*
* Set the physical register address need to read into RD_CMD register,
* Set the slave address offset need to read into RD_CMD register,
* then ADI controller will start to transfer automatically.
*/
writel_relaxed(reg_paddr, sadi->base + REG_ADI_RD_CMD);
writel_relaxed(reg, sadi->base + REG_ADI_RD_CMD);
/*
* Wait read operation complete, the BIT_RD_CMD_BUSY will be set
@ -205,18 +265,15 @@ static int sprd_adi_read(struct sprd_adi *sadi, u32 reg_paddr, u32 *read_val)
}
/*
* The return value includes data and read register address, from bit 0
* to bit 15 are data, and from bit 16 to bit 30 are read register
* address. Then we can check the returned register address to validate
* data.
* The return value before adi r5p0 includes data and read register
* address, from bit 0to bit 15 are data, and from bit 16 to bit 30
* are read register address. Then we can check the returned register
* address to validate data.
*/
rd_addr = (val & RD_ADDR_MASK) >> RD_ADDR_SHIFT;
if (rd_addr != (reg_paddr & REG_ADDR_LOW_MASK)) {
dev_err(sadi->dev, "read error, reg addr = 0x%x, val = 0x%x\n",
reg_paddr, val);
ret = -EIO;
goto out;
if (sadi->data->read_check) {
ret = sadi->data->read_check(val, reg);
if (ret < 0)
goto out;
}
*read_val = val & RD_VALUE_MASK;
@ -227,9 +284,8 @@ out:
return ret;
}
static int sprd_adi_write(struct sprd_adi *sadi, u32 reg_paddr, u32 val)
static int sprd_adi_write(struct sprd_adi *sadi, u32 reg, u32 val)
{
unsigned long reg = sprd_adi_to_vaddr(sadi, reg_paddr);
u32 timeout = ADI_FIFO_DRAIN_TIMEOUT;
unsigned long flags;
int ret;
@ -244,6 +300,10 @@ static int sprd_adi_write(struct sprd_adi *sadi, u32 reg_paddr, u32 val)
}
}
ret = sprd_adi_check_addr(sadi, reg);
if (ret)
goto out;
ret = sprd_adi_drain_fifo(sadi);
if (ret < 0)
goto out;
@ -254,7 +314,8 @@ static int sprd_adi_write(struct sprd_adi *sadi, u32 reg_paddr, u32 val)
*/
do {
if (!sprd_adi_fifo_is_full(sadi)) {
writel_relaxed(val, (void __iomem *)reg);
/* we need virtual register address to write. */
writel_relaxed(val, (void __iomem *)(sadi->slave_vbase + reg));
break;
}
@ -277,60 +338,41 @@ static int sprd_adi_transfer_one(struct spi_controller *ctlr,
struct spi_transfer *t)
{
struct sprd_adi *sadi = spi_controller_get_devdata(ctlr);
u32 phy_reg, val;
u32 reg, val;
int ret;
if (t->rx_buf) {
phy_reg = *(u32 *)t->rx_buf + sadi->slave_pbase;
ret = sprd_adi_check_paddr(sadi, phy_reg);
if (ret)
return ret;
ret = sprd_adi_read(sadi, phy_reg, &val);
if (ret)
return ret;
reg = *(u32 *)t->rx_buf;
ret = sprd_adi_read(sadi, reg, &val);
*(u32 *)t->rx_buf = val;
} else if (t->tx_buf) {
u32 *p = (u32 *)t->tx_buf;
/*
* Get the physical register address need to write and convert
* the physical address to virtual address. Since we need
* virtual register address to write.
*/
phy_reg = *p++ + sadi->slave_pbase;
ret = sprd_adi_check_paddr(sadi, phy_reg);
if (ret)
return ret;
reg = *p++;
val = *p;
ret = sprd_adi_write(sadi, phy_reg, val);
if (ret)
return ret;
ret = sprd_adi_write(sadi, reg, val);
} else {
dev_err(sadi->dev, "no buffer for transfer\n");
return -EINVAL;
ret = -EINVAL;
}
return 0;
return ret;
}
static void sprd_adi_set_wdt_rst_mode(struct sprd_adi *sadi)
static void sprd_adi_set_wdt_rst_mode(void *p)
{
#if IS_ENABLED(CONFIG_SPRD_WATCHDOG)
u32 val;
struct sprd_adi *sadi = (struct sprd_adi *)p;
/* Set default watchdog reboot mode */
sprd_adi_read(sadi, sadi->slave_pbase + PMIC_RST_STATUS, &val);
/* Init watchdog reset mode */
sprd_adi_read(sadi, PMIC_RST_STATUS, &val);
val |= HWRST_STATUS_WATCHDOG;
sprd_adi_write(sadi, sadi->slave_pbase + PMIC_RST_STATUS, val);
sprd_adi_write(sadi, PMIC_RST_STATUS, val);
#endif
}
static int sprd_adi_restart_handler(struct notifier_block *this,
unsigned long mode, void *cmd)
static int sprd_adi_restart(struct notifier_block *this, unsigned long mode,
void *cmd, struct sprd_adi_wdg *wdg)
{
struct sprd_adi *sadi = container_of(this, struct sprd_adi,
restart_handler);
@ -366,40 +408,40 @@ static int sprd_adi_restart_handler(struct notifier_block *this,
reboot_mode = HWRST_STATUS_NORMAL;
/* Record the reboot mode */
sprd_adi_read(sadi, sadi->slave_pbase + PMIC_RST_STATUS, &val);
sprd_adi_read(sadi, wdg->rst_sts, &val);
val &= ~HWRST_STATUS_WATCHDOG;
val |= reboot_mode;
sprd_adi_write(sadi, sadi->slave_pbase + PMIC_RST_STATUS, val);
sprd_adi_write(sadi, wdg->rst_sts, val);
/* Enable the interface clock of the watchdog */
sprd_adi_read(sadi, sadi->slave_pbase + PMIC_MODULE_EN, &val);
sprd_adi_read(sadi, wdg->wdg_en, &val);
val |= BIT_WDG_EN;
sprd_adi_write(sadi, sadi->slave_pbase + PMIC_MODULE_EN, val);
sprd_adi_write(sadi, wdg->wdg_en, val);
/* Enable the work clock of the watchdog */
sprd_adi_read(sadi, sadi->slave_pbase + PMIC_CLK_EN, &val);
sprd_adi_read(sadi, wdg->wdg_clk, &val);
val |= BIT_WDG_EN;
sprd_adi_write(sadi, sadi->slave_pbase + PMIC_CLK_EN, val);
sprd_adi_write(sadi, wdg->wdg_clk, val);
/* Unlock the watchdog */
sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOCK, WDG_UNLOCK_KEY);
sprd_adi_write(sadi, wdg->base + REG_WDG_LOCK, WDG_UNLOCK_KEY);
sprd_adi_read(sadi, sadi->slave_pbase + REG_WDG_CTRL, &val);
sprd_adi_read(sadi, wdg->base + REG_WDG_CTRL, &val);
val |= BIT_WDG_NEW;
sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_CTRL, val);
sprd_adi_write(sadi, wdg->base + REG_WDG_CTRL, val);
/* Load the watchdog timeout value, 50ms is always enough. */
sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOAD_HIGH, 0);
sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOAD_LOW,
sprd_adi_write(sadi, wdg->base + REG_WDG_LOAD_HIGH, 0);
sprd_adi_write(sadi, wdg->base + REG_WDG_LOAD_LOW,
WDG_LOAD_VAL & WDG_LOAD_MASK);
/* Start the watchdog to reset system */
sprd_adi_read(sadi, sadi->slave_pbase + REG_WDG_CTRL, &val);
sprd_adi_read(sadi, wdg->base + REG_WDG_CTRL, &val);
val |= BIT_WDG_RUN | BIT_WDG_RST;
sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_CTRL, val);
sprd_adi_write(sadi, wdg->base + REG_WDG_CTRL, val);
/* Lock the watchdog */
sprd_adi_write(sadi, sadi->slave_pbase + REG_WDG_LOCK, ~WDG_UNLOCK_KEY);
sprd_adi_write(sadi, wdg->base + REG_WDG_LOCK, ~WDG_UNLOCK_KEY);
mdelay(1000);
@ -407,6 +449,19 @@ static int sprd_adi_restart_handler(struct notifier_block *this,
return NOTIFY_DONE;
}
static int sprd_adi_restart_sc9860(struct notifier_block *this,
unsigned long mode, void *cmd)
{
struct sprd_adi_wdg wdg = {
.base = PMIC_WDG_BASE,
.rst_sts = PMIC_RST_STATUS,
.wdg_en = PMIC_MODULE_EN,
.wdg_clk = PMIC_CLK_EN,
};
return sprd_adi_restart(this, mode, cmd, &wdg);
}
static void sprd_adi_hw_init(struct sprd_adi *sadi)
{
struct device_node *np = sadi->dev->of_node;
@ -458,10 +513,11 @@ static void sprd_adi_hw_init(struct sprd_adi *sadi)
static int sprd_adi_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
const struct sprd_adi_data *data;
struct spi_controller *ctlr;
struct sprd_adi *sadi;
struct resource *res;
u32 num_chipselect;
u16 num_chipselect;
int ret;
if (!np) {
@ -469,6 +525,12 @@ static int sprd_adi_probe(struct platform_device *pdev)
return -ENODEV;
}
data = of_device_get_match_data(&pdev->dev);
if (!data) {
dev_err(&pdev->dev, "no matching driver data found\n");
return -EINVAL;
}
pdev->id = of_alias_get_id(np, "spi");
num_chipselect = of_get_child_count(np);
@ -486,10 +548,12 @@ static int sprd_adi_probe(struct platform_device *pdev)
goto put_ctlr;
}
sadi->slave_vbase = (unsigned long)sadi->base + ADI_SLAVE_OFFSET;
sadi->slave_pbase = res->start + ADI_SLAVE_OFFSET;
sadi->slave_vbase = (unsigned long)sadi->base +
data->slave_offset;
sadi->slave_pbase = res->start + data->slave_offset;
sadi->ctlr = ctlr;
sadi->dev = &pdev->dev;
sadi->data = data;
ret = of_hwspin_lock_get_id(np, 0);
if (ret > 0 || (IS_ENABLED(CONFIG_HWSPINLOCK) && ret == 0)) {
sadi->hwlock =
@ -510,7 +574,9 @@ static int sprd_adi_probe(struct platform_device *pdev)
}
sprd_adi_hw_init(sadi);
sprd_adi_set_wdt_rst_mode(sadi);
if (sadi->data->wdg_rst)
sadi->data->wdg_rst(sadi);
ctlr->dev.of_node = pdev->dev.of_node;
ctlr->bus_num = pdev->id;
@ -525,12 +591,14 @@ static int sprd_adi_probe(struct platform_device *pdev)
goto put_ctlr;
}
sadi->restart_handler.notifier_call = sprd_adi_restart_handler;
sadi->restart_handler.priority = 128;
ret = register_restart_handler(&sadi->restart_handler);
if (ret) {
dev_err(&pdev->dev, "can not register restart handler\n");
goto put_ctlr;
if (sadi->data->restart) {
sadi->restart_handler.notifier_call = sadi->data->restart;
sadi->restart_handler.priority = 128;
ret = register_restart_handler(&sadi->restart_handler);
if (ret) {
dev_err(&pdev->dev, "can not register restart handler\n");
goto put_ctlr;
}
}
return 0;
@ -549,9 +617,38 @@ static int sprd_adi_remove(struct platform_device *pdev)
return 0;
}
static struct sprd_adi_data sc9860_data = {
.slave_offset = ADI_10BIT_SLAVE_OFFSET,
.slave_addr_size = ADI_10BIT_SLAVE_ADDR_SIZE,
.read_check = sprd_adi_read_check_r2,
.restart = sprd_adi_restart_sc9860,
.wdg_rst = sprd_adi_set_wdt_rst_mode,
};
static struct sprd_adi_data sc9863_data = {
.slave_offset = ADI_12BIT_SLAVE_OFFSET,
.slave_addr_size = ADI_12BIT_SLAVE_ADDR_SIZE,
.read_check = sprd_adi_read_check_r3,
};
static struct sprd_adi_data ums512_data = {
.slave_offset = ADI_15BIT_SLAVE_OFFSET,
.slave_addr_size = ADI_15BIT_SLAVE_ADDR_SIZE,
.read_check = sprd_adi_read_check_r3,
};
static const struct of_device_id sprd_adi_of_match[] = {
{
.compatible = "sprd,sc9860-adi",
.data = &sc9860_data,
},
{
.compatible = "sprd,sc9863-adi",
.data = &sc9863_data,
},
{
.compatible = "sprd,ums512-adi",
.data = &ums512_data,
},
{ },
};

121
drivers/spi/spi-stm32.c
View File

@ -162,6 +162,8 @@
#define SPI_3WIRE_TX 3
#define SPI_3WIRE_RX 4
#define STM32_SPI_AUTOSUSPEND_DELAY 1 /* 1 ms */
/*
* use PIO for small transfers, avoiding DMA setup/teardown overhead for drivers
* without fifo buffers.
@ -568,29 +570,30 @@ static void stm32f4_spi_read_rx(struct stm32_spi *spi)
/**
* stm32h7_spi_read_rxfifo - Read bytes in Receive Data Register
* @spi: pointer to the spi controller data structure
* @flush: boolean indicating that FIFO should be flushed
*
* Write in rx_buf depends on remaining bytes to avoid to write beyond
* rx_buf end.
*/
static void stm32h7_spi_read_rxfifo(struct stm32_spi *spi, bool flush)
static void stm32h7_spi_read_rxfifo(struct stm32_spi *spi)
{
u32 sr = readl_relaxed(spi->base + STM32H7_SPI_SR);
u32 rxplvl = FIELD_GET(STM32H7_SPI_SR_RXPLVL, sr);
while ((spi->rx_len > 0) &&
((sr & STM32H7_SPI_SR_RXP) ||
(flush && ((sr & STM32H7_SPI_SR_RXWNE) || (rxplvl > 0))))) {
((sr & STM32H7_SPI_SR_EOT) &&
((sr & STM32H7_SPI_SR_RXWNE) || (rxplvl > 0))))) {
u32 offs = spi->cur_xferlen - spi->rx_len;
if ((spi->rx_len >= sizeof(u32)) ||
(flush && (sr & STM32H7_SPI_SR_RXWNE))) {
(sr & STM32H7_SPI_SR_RXWNE)) {
u32 *rx_buf32 = (u32 *)(spi->rx_buf + offs);
*rx_buf32 = readl_relaxed(spi->base + STM32H7_SPI_RXDR);
spi->rx_len -= sizeof(u32);
} else if ((spi->rx_len >= sizeof(u16)) ||
(flush && (rxplvl >= 2 || spi->cur_bpw > 8))) {
(!(sr & STM32H7_SPI_SR_RXWNE) &&
(rxplvl >= 2 || spi->cur_bpw > 8))) {
u16 *rx_buf16 = (u16 *)(spi->rx_buf + offs);
*rx_buf16 = readw_relaxed(spi->base + STM32H7_SPI_RXDR);
@ -606,8 +609,8 @@ static void stm32h7_spi_read_rxfifo(struct stm32_spi *spi, bool flush)
rxplvl = FIELD_GET(STM32H7_SPI_SR_RXPLVL, sr);
}
dev_dbg(spi->dev, "%s%s: %d bytes left\n", __func__,
flush ? "(flush)" : "", spi->rx_len);
dev_dbg(spi->dev, "%s: %d bytes left (sr=%08x)\n",
__func__, spi->rx_len, sr);
}
/**
@ -674,18 +677,12 @@ static void stm32f4_spi_disable(struct stm32_spi *spi)
* stm32h7_spi_disable - Disable SPI controller
* @spi: pointer to the spi controller data structure
*
* RX-Fifo is flushed when SPI controller is disabled. To prevent any data
* loss, use stm32h7_spi_read_rxfifo(flush) to read the remaining bytes in
* RX-Fifo.
* Normally, if TSIZE has been configured, we should relax the hardware at the
* reception of the EOT interrupt. But in case of error, EOT will not be
* raised. So the subsystem unprepare_message call allows us to properly
* complete the transfer from an hardware point of view.
* RX-Fifo is flushed when SPI controller is disabled.
*/
static void stm32h7_spi_disable(struct stm32_spi *spi)
{
unsigned long flags;
u32 cr1, sr;
u32 cr1;
dev_dbg(spi->dev, "disable controller\n");
@ -698,25 +695,6 @@ static void stm32h7_spi_disable(struct stm32_spi *spi)
return;
}
/* Wait on EOT or suspend the flow */
if (readl_relaxed_poll_timeout_atomic(spi->base + STM32H7_SPI_SR,
sr, !(sr & STM32H7_SPI_SR_EOT),
10, 100000) < 0) {
if (cr1 & STM32H7_SPI_CR1_CSTART) {
writel_relaxed(cr1 | STM32H7_SPI_CR1_CSUSP,
spi->base + STM32H7_SPI_CR1);
if (readl_relaxed_poll_timeout_atomic(
spi->base + STM32H7_SPI_SR,
sr, !(sr & STM32H7_SPI_SR_SUSP),
10, 100000) < 0)
dev_warn(spi->dev,
"Suspend request timeout\n");
}
}
if (!spi->cur_usedma && spi->rx_buf && (spi->rx_len > 0))
stm32h7_spi_read_rxfifo(spi, true);
if (spi->cur_usedma && spi->dma_tx)
dmaengine_terminate_all(spi->dma_tx);
if (spi->cur_usedma && spi->dma_rx)
@ -911,7 +889,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
if (__ratelimit(&rs))
dev_dbg_ratelimited(spi->dev, "Communication suspended\n");
if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
stm32h7_spi_read_rxfifo(spi, false);
stm32h7_spi_read_rxfifo(spi);
/*
* If communication is suspended while using DMA, it means
* that something went wrong, so stop the current transfer
@ -932,8 +910,10 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
if (sr & STM32H7_SPI_SR_EOT) {
if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
stm32h7_spi_read_rxfifo(spi, true);
end = true;
stm32h7_spi_read_rxfifo(spi);
if (!spi->cur_usedma ||
(spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX))
end = true;
}
if (sr & STM32H7_SPI_SR_TXP)
@ -942,7 +922,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
if (sr & STM32H7_SPI_SR_RXP)
if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
stm32h7_spi_read_rxfifo(spi, false);
stm32h7_spi_read_rxfifo(spi);
writel_relaxed(sr & mask, spi->base + STM32H7_SPI_IFCR);
@ -1041,42 +1021,17 @@ static void stm32f4_spi_dma_tx_cb(void *data)
}
/**
* stm32f4_spi_dma_rx_cb - dma callback
* stm32_spi_dma_rx_cb - dma callback
* @data: pointer to the spi controller data structure
*
* DMA callback is called when the transfer is complete for DMA RX channel.
*/
static void stm32f4_spi_dma_rx_cb(void *data)
static void stm32_spi_dma_rx_cb(void *data)
{
struct stm32_spi *spi = data;
spi_finalize_current_transfer(spi->master);
stm32f4_spi_disable(spi);
}
/**
* stm32h7_spi_dma_cb - dma callback
* @data: pointer to the spi controller data structure
*
* DMA callback is called when the transfer is complete or when an error
* occurs. If the transfer is complete, EOT flag is raised.
*/
static void stm32h7_spi_dma_cb(void *data)
{
struct stm32_spi *spi = data;
unsigned long flags;
u32 sr;
spin_lock_irqsave(&spi->lock, flags);
sr = readl_relaxed(spi->base + STM32H7_SPI_SR);
spin_unlock_irqrestore(&spi->lock, flags);
if (!(sr & STM32H7_SPI_SR_EOT))
dev_warn(spi->dev, "DMA error (sr=0x%08x)\n", sr);
/* Now wait for EOT, or SUSP or OVR in case of error */
spi->cfg->disable(spi);
}
/**
@ -1242,11 +1197,13 @@ static void stm32f4_spi_transfer_one_dma_start(struct stm32_spi *spi)
*/
static void stm32h7_spi_transfer_one_dma_start(struct stm32_spi *spi)
{
/* Enable the interrupts relative to the end of transfer */
stm32_spi_set_bits(spi, STM32H7_SPI_IER, STM32H7_SPI_IER_EOTIE |
STM32H7_SPI_IER_TXTFIE |
STM32H7_SPI_IER_OVRIE |
STM32H7_SPI_IER_MODFIE);
uint32_t ier = STM32H7_SPI_IER_OVRIE | STM32H7_SPI_IER_MODFIE;
/* Enable the interrupts */
if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX)
ier |= STM32H7_SPI_IER_EOTIE | STM32H7_SPI_IER_TXTFIE;
stm32_spi_set_bits(spi, STM32H7_SPI_IER, ier);
stm32_spi_enable(spi);
@ -1645,10 +1602,6 @@ static int stm32_spi_transfer_one(struct spi_master *master,
struct stm32_spi *spi = spi_master_get_devdata(master);
int ret;
/* Don't do anything on 0 bytes transfers */
if (transfer->len == 0)
return 0;
spi->tx_buf = transfer->tx_buf;
spi->rx_buf = transfer->rx_buf;
spi->tx_len = spi->tx_buf ? transfer->len : 0;
@ -1762,7 +1715,7 @@ static const struct stm32_spi_cfg stm32f4_spi_cfg = {
.set_mode = stm32f4_spi_set_mode,
.transfer_one_dma_start = stm32f4_spi_transfer_one_dma_start,
.dma_tx_cb = stm32f4_spi_dma_tx_cb,
.dma_rx_cb = stm32f4_spi_dma_rx_cb,
.dma_rx_cb = stm32_spi_dma_rx_cb,
.transfer_one_irq = stm32f4_spi_transfer_one_irq,
.irq_handler_event = stm32f4_spi_irq_event,
.irq_handler_thread = stm32f4_spi_irq_thread,
@ -1782,8 +1735,11 @@ static const struct stm32_spi_cfg stm32h7_spi_cfg = {
.set_data_idleness = stm32h7_spi_data_idleness,
.set_number_of_data = stm32h7_spi_number_of_data,
.transfer_one_dma_start = stm32h7_spi_transfer_one_dma_start,
.dma_rx_cb = stm32h7_spi_dma_cb,
.dma_tx_cb = stm32h7_spi_dma_cb,
.dma_rx_cb = stm32_spi_dma_rx_cb,
/*
* dma_tx_cb is not necessary since in case of TX, dma is followed by
* SPI access hence handling is performed within the SPI interrupt
*/
.transfer_one_irq = stm32h7_spi_transfer_one_irq,
.irq_handler_thread = stm32h7_spi_irq_thread,
.baud_rate_div_min = STM32H7_SPI_MBR_DIV_MIN,
@ -1927,6 +1883,9 @@ static int stm32_spi_probe(struct platform_device *pdev)
if (spi->dma_tx || spi->dma_rx)
master->can_dma = stm32_spi_can_dma;
pm_runtime_set_autosuspend_delay(&pdev->dev,
STM32_SPI_AUTOSUSPEND_DELAY);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
pm_runtime_enable(&pdev->dev);
@ -1938,6 +1897,9 @@ static int stm32_spi_probe(struct platform_device *pdev)
goto err_pm_disable;
}
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
dev_info(&pdev->dev, "driver initialized\n");
return 0;
@ -1946,6 +1908,7 @@ err_pm_disable:
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_dont_use_autosuspend(&pdev->dev);
err_dma_release:
if (spi->dma_tx)
dma_release_channel(spi->dma_tx);
@ -1970,6 +1933,8 @@ static int stm32_spi_remove(struct platform_device *pdev)
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_dont_use_autosuspend(&pdev->dev);
if (master->dma_tx)
dma_release_channel(master->dma_tx);
if (master->dma_rx)

8
drivers/spi/spi-tegra114.c
View File

@ -717,12 +717,12 @@ static void tegra_spi_deinit_dma_param(struct tegra_spi_data *tspi,
dma_release_channel(dma_chan);
}
static int tegra_spi_set_hw_cs_timing(struct spi_device *spi,
struct spi_delay *setup,
struct spi_delay *hold,
struct spi_delay *inactive)
static int tegra_spi_set_hw_cs_timing(struct spi_device *spi)
{
struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master);
struct spi_delay *setup = &spi->cs_setup;
struct spi_delay *hold = &spi->cs_hold;
struct spi_delay *inactive = &spi->cs_inactive;
u8 setup_dly, hold_dly, inactive_dly;
u32 setup_hold;
u32 spi_cs_timing;

77
drivers/spi/spi-tegra20-slink.c
View File

@ -1061,33 +1061,12 @@ static int tegra_slink_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "Can not get clock %d\n", ret);
goto exit_free_master;
}
ret = clk_prepare(tspi->clk);
if (ret < 0) {
dev_err(&pdev->dev, "Clock prepare failed %d\n", ret);
goto exit_free_master;
}
ret = clk_enable(tspi->clk);
if (ret < 0) {
dev_err(&pdev->dev, "Clock enable failed %d\n", ret);
goto exit_clk_unprepare;
}
spi_irq = platform_get_irq(pdev, 0);
tspi->irq = spi_irq;
ret = request_threaded_irq(tspi->irq, tegra_slink_isr,
tegra_slink_isr_thread, IRQF_ONESHOT,
dev_name(&pdev->dev), tspi);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to register ISR for IRQ %d\n",
tspi->irq);
goto exit_clk_disable;
}
tspi->rst = devm_reset_control_get_exclusive(&pdev->dev, "spi");
if (IS_ERR(tspi->rst)) {
dev_err(&pdev->dev, "can not get reset\n");
ret = PTR_ERR(tspi->rst);
goto exit_free_irq;
goto exit_free_master;
}
tspi->max_buf_size = SLINK_FIFO_DEPTH << 2;
@ -1095,7 +1074,7 @@ static int tegra_slink_probe(struct platform_device *pdev)
ret = tegra_slink_init_dma_param(tspi, true);
if (ret < 0)
goto exit_free_irq;
goto exit_free_master;
ret = tegra_slink_init_dma_param(tspi, false);
if (ret < 0)
goto exit_rx_dma_free;
@ -1106,16 +1085,9 @@ static int tegra_slink_probe(struct platform_device *pdev)
init_completion(&tspi->xfer_completion);
pm_runtime_enable(&pdev->dev);
if (!pm_runtime_enabled(&pdev->dev)) {
ret = tegra_slink_runtime_resume(&pdev->dev);
if (ret)
goto exit_pm_disable;
}
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0) {
ret = pm_runtime_resume_and_get(&pdev->dev);
if (ret) {
dev_err(&pdev->dev, "pm runtime get failed, e = %d\n", ret);
pm_runtime_put_noidle(&pdev->dev);
goto exit_pm_disable;
}
@ -1123,33 +1095,43 @@ static int tegra_slink_probe(struct platform_device *pdev)
udelay(2);
reset_control_deassert(tspi->rst);
spi_irq = platform_get_irq(pdev, 0);
tspi->irq = spi_irq;
ret = request_threaded_irq(tspi->irq, tegra_slink_isr,
tegra_slink_isr_thread, IRQF_ONESHOT,
dev_name(&pdev->dev), tspi);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to register ISR for IRQ %d\n",
tspi->irq);
goto exit_pm_put;
}
tspi->def_command_reg = SLINK_M_S;
tspi->def_command2_reg = SLINK_CS_ACTIVE_BETWEEN;
tegra_slink_writel(tspi, tspi->def_command_reg, SLINK_COMMAND);
tegra_slink_writel(tspi, tspi->def_command2_reg, SLINK_COMMAND2);
pm_runtime_put(&pdev->dev);
master->dev.of_node = pdev->dev.of_node;
ret = devm_spi_register_master(&pdev->dev, master);
ret = spi_register_master(master);
if (ret < 0) {
dev_err(&pdev->dev, "can not register to master err %d\n", ret);
goto exit_pm_disable;
goto exit_free_irq;
}
pm_runtime_put(&pdev->dev);
return ret;
exit_free_irq:
free_irq(spi_irq, tspi);
exit_pm_put:
pm_runtime_put(&pdev->dev);
exit_pm_disable:
pm_runtime_disable(&pdev->dev);
if (!pm_runtime_status_suspended(&pdev->dev))
tegra_slink_runtime_suspend(&pdev->dev);
tegra_slink_deinit_dma_param(tspi, false);
exit_rx_dma_free:
tegra_slink_deinit_dma_param(tspi, true);
exit_free_irq:
free_irq(spi_irq, tspi);
exit_clk_disable:
clk_disable(tspi->clk);
exit_clk_unprepare:
clk_unprepare(tspi->clk);
exit_free_master:
spi_master_put(master);
return ret;
@ -1160,10 +1142,11 @@ static int tegra_slink_remove(struct platform_device *pdev)
struct spi_master *master = platform_get_drvdata(pdev);
struct tegra_slink_data *tspi = spi_master_get_devdata(master);
spi_unregister_master(master);
free_irq(tspi->irq, tspi);
clk_disable(tspi->clk);
clk_unprepare(tspi->clk);
pm_runtime_disable(&pdev->dev);
if (tspi->tx_dma_chan)
tegra_slink_deinit_dma_param(tspi, false);
@ -1171,10 +1154,6 @@ static int tegra_slink_remove(struct platform_device *pdev)
if (tspi->rx_dma_chan)
tegra_slink_deinit_dma_param(tspi, true);
pm_runtime_disable(&pdev->dev);
if (!pm_runtime_status_suspended(&pdev->dev))
tegra_slink_runtime_suspend(&pdev->dev);
return 0;
}

8
drivers/spi/spi-zynq-qspi.c
View File

@ -545,7 +545,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
ZYNQ_QSPI_IXR_RXTX_MASK);
if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
if (!wait_for_completion_timeout(&xqspi->data_completion,
msecs_to_jiffies(1000)))
err = -ETIMEDOUT;
}
@ -563,7 +563,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
ZYNQ_QSPI_IXR_RXTX_MASK);
if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
if (!wait_for_completion_timeout(&xqspi->data_completion,
msecs_to_jiffies(1000)))
err = -ETIMEDOUT;
}
@ -579,7 +579,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
ZYNQ_QSPI_IXR_RXTX_MASK);
if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
if (!wait_for_completion_timeout(&xqspi->data_completion,
msecs_to_jiffies(1000)))
err = -ETIMEDOUT;
@ -603,7 +603,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
ZYNQ_QSPI_IXR_RXTX_MASK);
if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
if (!wait_for_completion_timeout(&xqspi->data_completion,
msecs_to_jiffies(1000)))
err = -ETIMEDOUT;
}

6
drivers/spi/spi.c
View File

@ -846,9 +846,9 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio) ||
!spi->controller->set_cs_timing) {
if (activate)
spi_delay_exec(&spi->controller->cs_setup, NULL);
spi_delay_exec(&spi->cs_setup, NULL);
else
spi_delay_exec(&spi->controller->cs_hold, NULL);
spi_delay_exec(&spi->cs_hold, NULL);
}
if (spi->mode & SPI_CS_HIGH)
@ -891,7 +891,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio) ||
!spi->controller->set_cs_timing) {
if (!activate)
spi_delay_exec(&spi->controller->cs_inactive, NULL);
spi_delay_exec(&spi->cs_inactive, NULL);
}
}

1
include/linux/platform_data/spi-mt65xx.h
View File

@ -12,5 +12,6 @@
/* Board specific platform_data */
struct mtk_chip_config {
u32 sample_sel;
u32 tick_delay;
};
#endif

26
include/linux/spi/spi.h
View File

@ -147,7 +147,11 @@ extern int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer);
* not using a GPIO line)
* @word_delay: delay to be inserted between consecutive
* words of a transfer
*
* @cs_setup: delay to be introduced by the controller after CS is asserted
* @cs_hold: delay to be introduced by the controller before CS is deasserted
* @cs_inactive: delay to be introduced by the controller after CS is
* deasserted. If @cs_change_delay is used from @spi_transfer, then the
* two delays will be added up.
* @statistics: statistics for the spi_device
*
* A @spi_device is used to interchange data between an SPI slave
@ -188,6 +192,10 @@ struct spi_device {
int cs_gpio; /* LEGACY: chip select gpio */
struct gpio_desc *cs_gpiod; /* chip select gpio desc */
struct spi_delay word_delay; /* inter-word delay */
/* CS delays */
struct spi_delay cs_setup;
struct spi_delay cs_hold;
struct spi_delay cs_inactive;
/* the statistics */
struct spi_statistics statistics;
@ -339,6 +347,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
* @max_speed_hz: Highest supported transfer speed
* @flags: other constraints relevant to this driver
* @slave: indicates that this is an SPI slave controller
* @devm_allocated: whether the allocation of this struct is devres-managed
* @max_transfer_size: function that returns the max transfer size for
* a &spi_device; may be %NULL, so the default %SIZE_MAX will be used.
* @max_message_size: function that returns the max message size for
@ -412,11 +421,6 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
* controller has native support for memory like operations.
* @unprepare_message: undo any work done by prepare_message().
* @slave_abort: abort the ongoing transfer request on an SPI slave controller
* @cs_setup: delay to be introduced by the controller after CS is asserted
* @cs_hold: delay to be introduced by the controller before CS is deasserted
* @cs_inactive: delay to be introduced by the controller after CS is
* deasserted. If @cs_change_delay is used from @spi_transfer, then the
* two delays will be added up.
* @cs_gpios: LEGACY: array of GPIO descs to use as chip select lines; one per
* CS number. Any individual value may be -ENOENT for CS lines that
* are not GPIOs (driven by the SPI controller itself). Use the cs_gpiods
@ -511,7 +515,7 @@ struct spi_controller {
#define SPI_MASTER_GPIO_SS BIT(5) /* GPIO CS must select slave */
/* flag indicating this is a non-devres managed controller */
/* flag indicating if the allocation of this struct is devres-managed */
bool devm_allocated;
/* flag indicating this is an SPI slave controller */
@ -550,8 +554,7 @@ struct spi_controller {
* to configure specific CS timing through spi_set_cs_timing() after
* spi_setup().
*/
int (*set_cs_timing)(struct spi_device *spi, struct spi_delay *setup,
struct spi_delay *hold, struct spi_delay *inactive);
int (*set_cs_timing)(struct spi_device *spi);
/* bidirectional bulk transfers
*
@ -638,11 +641,6 @@ struct spi_controller {
/* Optimized handlers for SPI memory-like operations. */
const struct spi_controller_mem_ops *mem_ops;
/* CS delays */
struct spi_delay cs_setup;
struct spi_delay cs_hold;
struct spi_delay cs_inactive;
/* gpio chip select */
int *cs_gpios;
struct gpio_desc **cs_gpiods;