iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

media: i2c: ov9282: Add selection for CSI2 clock mode

Browse Source 
The sensor supports either having the CSI2 clock lane free
running, or gated when there is no packet to transmit.
The driver only selected gated (non-continuous) clock mode.

Add code to allow fwnode to configure whether the clock is
gated or free running.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This commit is contained in:
Dave Stevenson 2022-10-28 17:08:54 +01:00 committed by Mauro Carvalho Chehab
parent 9fd61bb0e3
commit 6f7def3d8a
1 changed files with 22 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
drivers/media/i2c/ov9282.c
View File

@ -45,6 +45,9 @@
/* Group hold register */
#define OV9282_REG_HOLD 0x3308
#define OV9282_REG_MIPI_CTRL00 0x4800
#define OV9282_GATED_CLOCK BIT(5)
/* Input clock rate */
#define OV9282_INCLK_RATE 24000000
@ -136,6 +139,7 @@ struct ov9282 {
struct v4l2_ctrl *again_ctrl;
};
u32 vblank;
bool noncontinuous_clock;
const struct ov9282_mode *cur_mode;
struct mutex mutex;
bool streaming;
@ -145,7 +149,13 @@ static const s64 link_freq[] = {
OV9282_LINK_FREQ,
};
/* Common registers */
/*
* Common registers
*
* Note: Do NOT include a software reset (0x0103, 0x01) in any of these
* register arrays as some settings are written as part of ov9282_power_on,
* and the reset will clear them.
*/
static const struct ov9282_reg common_regs[] = {
{0x0302, 0x32},
{0x030d, 0x50},
@ -201,7 +211,6 @@ static const struct ov9282_reg common_regs[] = {
{0x4601, 0x04},
{0x470f, 0x00},
{0x4f07, 0x00},
{0x4800, 0x20},
{0x5000, 0x9f},
{0x5001, 0x00},
{0x5e00, 0x00},
@ -835,6 +844,9 @@ static int ov9282_parse_hw_config(struct ov9282 *ov9282)
if (ret)
return ret;
ov9282->noncontinuous_clock =
bus_cfg.bus.mipi_csi2.flags & V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
if (bus_cfg.bus.mipi_csi2.num_data_lanes != OV9282_NUM_DATA_LANES) {
dev_err(ov9282->dev,
"number of CSI2 data lanes %d is not supported",
@ -903,6 +915,14 @@ static int ov9282_power_on(struct device *dev)
usleep_range(400, 600);
ret = ov9282_write_reg(ov9282, OV9282_REG_MIPI_CTRL00, 1,
ov9282->noncontinuous_clock ?
OV9282_GATED_CLOCK : 0);
if (ret) {
dev_err(ov9282->dev, "fail to write MIPI_CTRL00");
return ret;
}
return 0;
error_reset: