iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

btrfs: verity metadata orphan items

Browse Source 
Writing out the verity data is too large of an operation to do in a
single transaction. If we are interrupted before we finish creating
fsverity metadata for a file, or fail to clean up already created
metadata after a failure, we could leak the verity items that we already
committed.

To address this issue, we use the orphan mechanism. When we start
enabling verity on a file, we also add an orphan item for that inode.
When we are finished, we delete the orphan. However, if we are
interrupted midway, the orphan will be present at mount and we can
cleanup the half-formed verity state.

There is a possible race with a normal unlink operation: if unlink and
verity run on the same file in parallel, it is possible for verity to
succeed and delete the still legitimate orphan added by unlink. Then, if
we are interrupted and mount in that state, we will never clean up the
inode properly. This is also possible for a file created with O_TMPFILE.
Check nlink==0 before deleting to avoid this race.

A final thing to note is that this is a resurrection of using orphans to
signal an operation besides "delete this inode". The old case was to
signal the need to do a truncate. That case still technically applies
for mounting very old file systems, so we need to take some care to not
clobber it. To that end, we just have to be careful that verity orphan
cleanup is a no-op for non-verity files.

Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This commit is contained in:
Boris Burkov 2021-06-30 13:01:50 -07:00 committed by David Sterba
parent 146054090b
commit 705242538f
2 changed files with 93 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
fs/btrfs/inode.c
View File

@ -3557,7 +3557,14 @@ int btrfs_orphan_cleanup(struct btrfs_root *root)
/*
* If we have an inode with links, there are a couple of
* possibilities. Old kernels (before v3.12) used to create an
* possibilities:
*
* 1. We were halfway through creating fsverity metadata for the
* file. In that case, the orphan item represents incomplete
* fsverity metadata which must be cleaned up with
* btrfs_drop_verity_items and deleting the orphan item.
* 2. Old kernels (before v3.12) used to create an
* orphan item for truncate indicating that there were possibly
* extent items past i_size that needed to be deleted. In v3.12,
* truncate was changed to update i_size in sync with the extent
@ -3575,8 +3582,12 @@ int btrfs_orphan_cleanup(struct btrfs_root *root)
* but either way, we can delete the orphan item.
*/
if (ret == -ENOENT || inode->i_nlink) {
if (!ret)
if (!ret) {
ret = btrfs_drop_verity_items(BTRFS_I(inode));
iput(inode);
if (ret)
goto out;
}
trans = btrfs_start_transaction(root, 1);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);

87
fs/btrfs/verity.c
View File

@ -49,6 +49,15 @@
* So when fsverity asks for page 0 of the merkle tree, we pull up one page
* starting at offset 0 for this key type. These are also opaque to btrfs,
* we're blindly storing whatever fsverity sends down.
*
* Another important consideration is the fact that the Merkle tree data scales
* linearly with the size of the file (with 4K pages/blocks and SHA-256, it's
* ~1/127th the size) so for large files, writing the tree can be a lengthy
* operation. For that reason, we guard the whole enable verity operation
* (between begin_enable_verity and end_enable_verity) with an orphan item.
* Again, because the data can be pretty large, it's quite possible that we
* could run out of space writing it, so we try our best to handle errors by
* stopping and rolling back rather than aborting the victim transaction.
*/
#define MERKLE_START_ALIGN 65536
@ -396,6 +405,39 @@ out:
return ret;
}
/*
* Delete an fsverity orphan
*
* @trans: transaction to do the delete in
* @inode: inode to orphan
*
* Capture verity orphan specific logic that is repeated in the couple places
* we delete verity orphans. Specifically, handling ENOENT and ignoring inodes
* with 0 links.
*
* Returns zero on success or a negative error code on failure.
*/
static int del_orphan(struct btrfs_trans_handle *trans, struct btrfs_inode *inode)
{
struct btrfs_root *root = inode->root;
int ret;
/*
* If the inode has no links, it is either already unlinked, or was
* created with O_TMPFILE. In either case, it should have an orphan from
* that other operation. Rather than reference count the orphans, we
* simply ignore them here, because we only invoke the verity path in
* the orphan logic when i_nlink is 1.
*/
if (!inode->vfs_inode.i_nlink)
return 0;
ret = btrfs_del_orphan_item(trans, root, btrfs_ino(inode));
if (ret == -ENOENT)
ret = 0;
return ret;
}
/*
* Rollback in-progress verity if we encounter an error.
*
@ -424,8 +466,11 @@ static int rollback_verity(struct btrfs_inode *inode)
goto out;
}
/* 1 for updating the inode flag */
trans = btrfs_start_transaction(root, 1);
/*
* 1 for updating the inode flag
* 1 for deleting the orphan
*/
trans = btrfs_start_transaction(root, 2);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
btrfs_handle_fs_error(root->fs_info, ret,
@ -440,6 +485,11 @@ static int rollback_verity(struct btrfs_inode *inode)
btrfs_abort_transaction(trans, ret);
goto out;
}
ret = del_orphan(trans, inode);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto out;
}
btrfs_end_transaction(trans);
out:
return ret;
@ -457,6 +507,7 @@ out:
*
* - write out the descriptor items
* - mark the inode with the verity flag
* - delete the orphan item
* - mark the ro compat bit
* - clear the in progress bit
*
@ -484,8 +535,11 @@ static int finish_verity(struct btrfs_inode *inode, const void *desc,
if (ret)
goto out;
/* 1 for updating the inode flag */
trans = btrfs_start_transaction(root, 1);
/*
* 1 for updating the inode flag
* 1 for deleting the orphan
*/
trans = btrfs_start_transaction(root, 2);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
goto out;
@ -493,6 +547,9 @@ static int finish_verity(struct btrfs_inode *inode, const void *desc,
inode->ro_flags |= BTRFS_INODE_RO_VERITY;
btrfs_sync_inode_flags_to_i_flags(&inode->vfs_inode);
ret = btrfs_update_inode(trans, root, inode);
if (ret)
goto end_trans;
ret = del_orphan(trans, inode);
if (ret)
goto end_trans;
clear_bit(BTRFS_INODE_VERITY_IN_PROGRESS, &inode->runtime_flags);
@ -509,14 +566,16 @@ out:
*
* @filp: file to enable verity on
*
* Begin enabling fsverity for the file. We drop any existing verity items
* and set the in progress bit.
* Begin enabling fsverity for the file. We drop any existing verity items, add
* an orphan and set the in progress bit.
*
* Returns 0 on success, negative error code on failure.
*/
static int btrfs_begin_enable_verity(struct file *filp)
{
struct btrfs_inode *inode = BTRFS_I(file_inode(filp));
struct btrfs_root *root = inode->root;
struct btrfs_trans_handle *trans;
int ret;
ASSERT(inode_is_locked(file_inode(filp)));
@ -524,11 +583,25 @@ static int btrfs_begin_enable_verity(struct file *filp)
if (test_bit(BTRFS_INODE_VERITY_IN_PROGRESS, &inode->runtime_flags))
return -EBUSY;
/*
* This should almost never do anything, but theoretically, it's
* possible that we failed to enable verity on a file, then were
* interrupted or failed while rolling back, failed to cleanup the
* orphan, and finally attempt to enable verity again.
*/
ret = btrfs_drop_verity_items(inode);
if (ret)
return ret;
set_bit(BTRFS_INODE_VERITY_IN_PROGRESS, &inode->runtime_flags);
/* 1 for the orphan item */
trans = btrfs_start_transaction(root, 1);
if (IS_ERR(trans))
return PTR_ERR(trans);
ret = btrfs_orphan_add(trans, inode);
if (!ret)
set_bit(BTRFS_INODE_VERITY_IN_PROGRESS, &inode->runtime_flags);
btrfs_end_transaction(trans);
return 0;
}