clk: imx: imx7ulp: add arm hsrun mode clocks support
i.MX7ULP has a Cortex-A7 CPU which can run in RUN mode or HSRUN mode, it is controlled in SMC1 module. The RUN mode and HSRUN mode will use different clock source for ARM, "divcore" for RUN mode and "hsrun_divcore" for HSRUN mode, so the control bits in SMC1 module can be abstracted as a HW clock mux, this patch adds HSRUN mode related clocks in SCG1 module and adds "arm" clock in SMC1 module to support RUN mode and HSRUN mode switch. Latest clock tree in RUN mode as below: firc 0 0 0 48000000 0 0 50000 firc_bus_clk 0 0 0 48000000 0 0 50000 hsrun_scs_sel 0 0 0 48000000 0 0 50000 hsrun_divcore 0 0 0 48000000 0 0 50000 sosc 3 3 3 24000000 0 0 50000 spll_pre_sel 1 1 1 24000000 0 0 50000 spll_pre_div 1 1 2 24000000 0 0 50000 spll 1 1 2 528000000 0 0 50000 spll_pfd0 1 1 1 500210526 0 0 50000 spll_pfd_sel 1 1 0 500210526 0 0 50000 spll_sel 1 1 0 500210526 0 0 50000 scs_sel 1 1 0 500210526 0 0 50000 divcore 1 1 0 500210526 0 0 50000 arm 1 1 0 500210526 0 0 50000 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This commit is contained in:
parent
401371fb59
commit
7128d7f7ba
@ -29,6 +29,7 @@ static const char * const ddr_sels[] = { "apll_pfd_sel", "upll", };
|
||||
static const char * const nic_sels[] = { "firc", "ddr_clk", };
|
||||
static const char * const periph_plat_sels[] = { "dummy", "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", "upll", };
|
||||
static const char * const periph_bus_sels[] = { "dummy", "sosc_bus_clk", "mpll", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
|
||||
static const char * const arm_sels[] = { "divcore", "dummy", "dummy", "hsrun_divcore", };
|
||||
|
||||
/* used by sosc/sirc/firc/ddr/spll/apll dividers */
|
||||
static const struct clk_div_table ulp_div_table[] = {
|
||||
@ -102,10 +103,12 @@ static void __init imx7ulp_clk_scg1_init(struct device_node *np)
|
||||
|
||||
/* scs/ddr/nic select different clock source requires that clock to be enabled first */
|
||||
clks[IMX7ULP_CLK_SYS_SEL] = imx_clk_hw_mux2("scs_sel", base + 0x14, 24, 4, scs_sels, ARRAY_SIZE(scs_sels));
|
||||
clks[IMX7ULP_CLK_HSRUN_SYS_SEL] = imx_clk_hw_mux2("hsrun_scs_sel", base + 0x1c, 24, 4, scs_sels, ARRAY_SIZE(scs_sels));
|
||||
clks[IMX7ULP_CLK_NIC_SEL] = imx_clk_hw_mux2("nic_sel", base + 0x40, 28, 1, nic_sels, ARRAY_SIZE(nic_sels));
|
||||
clks[IMX7ULP_CLK_DDR_SEL] = imx_clk_hw_mux_flags("ddr_sel", base + 0x30, 24, 1, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
|
||||
|
||||
clks[IMX7ULP_CLK_CORE_DIV] = imx_clk_hw_divider_flags("divcore", "scs_sel", base + 0x14, 16, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
|
||||
clks[IMX7ULP_CLK_CORE_DIV] = imx_clk_hw_divider_flags("divcore", "scs_sel", base + 0x14, 16, 4, CLK_SET_RATE_PARENT);
|
||||
clks[IMX7ULP_CLK_HSRUN_CORE_DIV] = imx_clk_hw_divider_flags("hsrun_divcore", "hsrun_scs_sel", base + 0x1c, 16, 4, CLK_SET_RATE_PARENT);
|
||||
|
||||
clks[IMX7ULP_CLK_DDR_DIV] = imx_clk_divider_gate("ddr_clk", "ddr_sel", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, base + 0x30, 0, 3,
|
||||
0, ulp_div_table, &imx_ccm_lock);
|
||||
@ -218,3 +221,29 @@ static void __init imx7ulp_clk_pcc3_init(struct device_node *np)
|
||||
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
|
||||
}
|
||||
CLK_OF_DECLARE(imx7ulp_clk_pcc3, "fsl,imx7ulp-pcc3", imx7ulp_clk_pcc3_init);
|
||||
|
||||
static void __init imx7ulp_clk_smc1_init(struct device_node *np)
|
||||
{
|
||||
struct clk_hw_onecell_data *clk_data;
|
||||
struct clk_hw **clks;
|
||||
void __iomem *base;
|
||||
|
||||
clk_data = kzalloc(sizeof(*clk_data) + sizeof(*clk_data->hws) *
|
||||
IMX7ULP_CLK_SMC1_END, GFP_KERNEL);
|
||||
if (!clk_data)
|
||||
return;
|
||||
|
||||
clk_data->num = IMX7ULP_CLK_SMC1_END;
|
||||
clks = clk_data->hws;
|
||||
|
||||
/* SMC1 */
|
||||
base = of_iomap(np, 0);
|
||||
WARN_ON(!base);
|
||||
|
||||
clks[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10, 8, 2, arm_sels, ARRAY_SIZE(arm_sels), CLK_IS_CRITICAL);
|
||||
|
||||
imx_check_clk_hws(clks, clk_data->num);
|
||||
|
||||
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
|
||||
}
|
||||
CLK_OF_DECLARE(imx7ulp_clk_smc1, "fsl,imx7ulp-smc1", imx7ulp_clk_smc1_init);
|
||||
|
Loading…
Reference in New Issue
Block a user