Merge tag 'platform-drivers-x86-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform drivers fixes from Hans de Goede:

 - Documentation and compilation warning fixes

 - Kconfig dep fixes

 - Misc small code cleanups

* tag 'platform-drivers-x86-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: amd-pmc: Fix compilation without CONFIG_SUSPEND
  platform/x86: acerhdf: Cleanup str_starts_with()
  Documentation/ABI: sysfs-class-firmware-attributes: Misc. cleanups
  Documentation/ABI: sysfs-class-firmware-attributes: Fix Sphinx errors
  Documentation/ABI: sysfs-driver-intel_sdsi: Fix sphinx warnings
  platform/x86: barco-p50-gpio: Fix duplicate included linux/io.h
  platform/x86: samsung-laptop: Fix an unsigned comparison which can never be negative
  platform/x86: think-lmi: certificate support clean ups

Documentation/ABI/testing/sysfs-class-firmware-attributes

@@ -116,7 +116,7 @@ Description:
 					    <value>[ForceIf:<attribute>=<value>]
 					    <value>[ForceIfNot:<attribute>=<value>]
 
-					For example:
+					For example::
 
 					    LegacyOrom/dell_value_modifier has value:
 						    Disabled[ForceIf:SecureBoot=Enabled]
@@ -212,7 +212,7 @@ Description:
 		the next boot.
 
 		Lenovo specific class extensions
-		------------------------------
+		--------------------------------
 
 		On Lenovo systems the following additional settings are available:
 
@@ -246,9 +246,7 @@ Description:
 					that is being referenced (e.g hdd0, hdd1 etc)
 					This attribute defaults to device 0.
 
-		certificate:
+		certificate, signature, save_signature:
-		signature:
-		save_signature:
 					These attributes are used for certificate based authentication. This is
 					used in conjunction with a signing server as an alternative to password
 					based authentication.
@@ -257,22 +255,27 @@ Description:
 					The attributes can be displayed to check the stored value.
 
 					Some usage examples:
-					Installing a certificate to enable feature:
-						echo <supervisor password > authentication/Admin/current_password
-						echo <signed certificate> > authentication/Admin/certificate
 
-					Updating the installed certificate:
+						Installing a certificate to enable feature::
-						echo <signature> > authentication/Admin/signature
-						echo <signed certificate> > authentication/Admin/certificate
 
-					Removing the installed certificate:
+							echo "supervisor password" > authentication/Admin/current_password
-						echo <signature> > authentication/Admin/signature
+							echo "signed certificate" > authentication/Admin/certificate
-						echo '' > authentication/Admin/certificate
 
-					Changing a BIOS setting:
+						Updating the installed certificate::
-						echo <signature> > authentication/Admin/signature
+
-						echo <save signature> > authentication/Admin/save_signature
+							echo "signature" > authentication/Admin/signature
-						echo Enable > attribute/PasswordBeep/current_value
+							echo "signed certificate" > authentication/Admin/certificate
+
+						Removing the installed certificate::
+
+							echo "signature" > authentication/Admin/signature
+							echo "" > authentication/Admin/certificate
+
+						Changing a BIOS setting::
+
+							echo "signature" > authentication/Admin/signature
+							echo "save signature" > authentication/Admin/save_signature
+							echo Enable > attribute/PasswordBeep/current_value
 
 					You cannot enable certificate authentication if a supervisor password
 					has not been set.
@@ -288,9 +291,10 @@ Description:
 		certificate_to_password:
 					Write only attribute used to switch from certificate based authentication
 					back to password based.
-					Usage:
+					Usage::
-						echo <signature> > authentication/Admin/signature
+
-						echo <password> > authentication/Admin/certificate_to_password
+						echo "signature" > authentication/Admin/signature
+						echo "password" > authentication/Admin/certificate_to_password
 
 
 What:		/sys/class/firmware-attributes/*/attributes/pending_reboot
@@ -345,7 +349,7 @@ Description:
 
 		    # echo "factory" > /sys/class/firmware-attributes/*/device/attributes/reset_bios
 		    # cat /sys/class/firmware-attributes/*/device/attributes/reset_bios
-		    # builtinsafe lastknowngood [factory] custom
+		    builtinsafe lastknowngood [factory] custom
 
 		Note that any changes to this attribute requires a reboot
 		for changes to take effect.

Documentation/ABI/testing/sysfs-driver-intel_sdsi

@@ -13,17 +13,19 @@ Description:
 		Should the operation fail, one of the following error codes
 		may be returned:
 
+		==========	=====
 		Error Code	Cause
-	        ----------	-----
+		==========	=====
-	        EIO		General mailbox failure. Log may indicate cause.
+		EIO		General mailbox failure. Log may indicate cause.
-	        EBUSY		Mailbox is owned by another agent.
+		EBUSY		Mailbox is owned by another agent.
-	        EPERM		SDSI capability is not enabled in hardware.
+		EPERM		SDSI capability is not enabled in hardware.
-	        EPROTO		Failure in mailbox protocol detected by driver.
+		EPROTO		Failure in mailbox protocol detected by driver.
 				See log for details.
-	        EOVERFLOW	For provision commands, the size of the data
+		EOVERFLOW	For provision commands, the size of the data
 				exceeds what may be written.
-	        ESPIPE		Seeking is not allowed.
+		ESPIPE		Seeking is not allowed.
-	        ETIMEDOUT	Failure to complete mailbox transaction in time.
+		ETIMEDOUT	Failure to complete mailbox transaction in time.
+		==========	=====
 
 What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X/guid
 Date:		Feb 2022

drivers/platform/x86/acerhdf.c

@@ -584,21 +584,6 @@ static struct platform_driver acerhdf_driver = {
 	.remove = acerhdf_remove,
 };
 
-/* checks if str begins with start */
-static int str_starts_with(const char *str, const char *start)
-{
-	unsigned long str_len = 0, start_len = 0;
-
-	str_len = strlen(str);
-	start_len = strlen(start);
-
-	if (str_len >= start_len &&
-			!strncmp(str, start, start_len))
-		return 1;
-
-	return 0;
-}
-
 /* check hardware */
 static int __init acerhdf_check_hardware(void)
 {
@@ -651,9 +636,9 @@ static int __init acerhdf_check_hardware(void)
 		 * check if actual hardware BIOS vendor, product and version
 		 * IDs start with the strings of BIOS table entry
 		 */
-		if (str_starts_with(vendor, bt->vendor) &&
+		if (strstarts(vendor, bt->vendor) &&
-				str_starts_with(product, bt->product) &&
+		    strstarts(product, bt->product) &&
-				str_starts_with(version, bt->version)) {
+		    strstarts(version, bt->version)) {
 			found = 1;
 			break;
 		}

drivers/platform/x86/amd-pmc.c

@@ -160,8 +160,10 @@ MODULE_PARM_DESC(enable_stb, "Enable the STB debug mechanism");
 
 static struct amd_pmc_dev pmc;
 static int amd_pmc_send_cmd(struct amd_pmc_dev *dev, u32 arg, u32 *data, u8 msg, bool ret);
-static int amd_pmc_write_stb(struct amd_pmc_dev *dev, u32 data);
 static int amd_pmc_read_stb(struct amd_pmc_dev *dev, u32 *buf);
+#ifdef CONFIG_SUSPEND
+static int amd_pmc_write_stb(struct amd_pmc_dev *dev, u32 data);
+#endif
 
 static inline u32 amd_pmc_reg_read(struct amd_pmc_dev *dev, int reg_offset)
 {
@@ -325,6 +327,7 @@ static int get_metrics_table(struct amd_pmc_dev *pdev, struct smu_metrics *table
 	return 0;
 }
 
+#ifdef CONFIG_SUSPEND
 static void amd_pmc_validate_deepest(struct amd_pmc_dev *pdev)
 {
 	struct smu_metrics table;
@@ -338,6 +341,7 @@ static void amd_pmc_validate_deepest(struct amd_pmc_dev *pdev)
 		dev_dbg(pdev->dev, "Last suspend in deepest state for %lluus\n",
 			 table.timein_s0i3_lastcapture);
 }
+#endif
 
 #ifdef CONFIG_DEBUG_FS
 static int smu_fw_info_show(struct seq_file *s, void *unused)
@@ -569,6 +573,7 @@ out_unlock:
 	return rc;
 }
 
+#ifdef CONFIG_SUSPEND
 static int amd_pmc_get_os_hint(struct amd_pmc_dev *dev)
 {
 	switch (dev->cpu_id) {
@@ -694,6 +699,7 @@ static struct acpi_s2idle_dev_ops amd_pmc_s2idle_dev_ops = {
 	.prepare = amd_pmc_s2idle_prepare,
 	.restore = amd_pmc_s2idle_restore,
 };
+#endif
 
 static const struct pci_device_id pmc_pci_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, AMD_CPU_ID_YC) },
@@ -733,6 +739,7 @@ static int amd_pmc_s2d_init(struct amd_pmc_dev *dev)
 	return 0;
 }
 
+#ifdef CONFIG_SUSPEND
 static int amd_pmc_write_stb(struct amd_pmc_dev *dev, u32 data)
 {
 	int err;
@@ -753,6 +760,7 @@ static int amd_pmc_write_stb(struct amd_pmc_dev *dev, u32 data)
 
 	return 0;
 }
+#endif
 
 static int amd_pmc_read_stb(struct amd_pmc_dev *dev, u32 *buf)
 {
@@ -859,9 +867,11 @@ static int amd_pmc_probe(struct platform_device *pdev)
 
 	amd_pmc_get_smu_version(dev);
 	platform_set_drvdata(pdev, dev);
+#ifdef CONFIG_SUSPEND
 	err = acpi_register_lps0_dev(&amd_pmc_s2idle_dev_ops);
 	if (err)
 		dev_warn(dev->dev, "failed to register LPS0 sleep handler, expect increased power consumption\n");
+#endif
 
 	amd_pmc_dbgfs_register(dev);
 	return 0;
@@ -875,7 +885,9 @@ static int amd_pmc_remove(struct platform_device *pdev)
 {
 	struct amd_pmc_dev *dev = platform_get_drvdata(pdev);
 
+#ifdef CONFIG_SUSPEND
 	acpi_unregister_lps0_dev(&amd_pmc_s2idle_dev_ops);
+#endif
 	amd_pmc_dbgfs_unregister(dev);
 	pci_dev_put(dev->rdev);
 	mutex_destroy(&dev->lock);

drivers/platform/x86/barco-p50-gpio.c

@@ -10,7 +10,6 @@
 
 #define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
 
-#include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/dmi.h>
 #include <linux/err.h>

drivers/platform/x86/samsung-laptop.c

@@ -1121,8 +1121,6 @@ static void kbd_led_set(struct led_classdev *led_cdev,
 
 	if (value > samsung->kbd_led.max_brightness)
 		value = samsung->kbd_led.max_brightness;
-	else if (value < 0)
-		value = 0;
 
 	samsung->kbd_led_wk = value;
 	queue_work(samsung->led_workqueue, &samsung->kbd_led_work);

drivers/platform/x86/think-lmi.c

@@ -740,16 +740,8 @@ static ssize_t certificate_store(struct kobject *kobj,
 	if (!tlmi_priv.certificate_support)
 		return -EOPNOTSUPP;
 
-	new_cert = kstrdup(buf, GFP_KERNEL);
-	if (!new_cert)
-		return -ENOMEM;
-	/* Strip out CR if one is present */
-	strip_cr(new_cert);
-
 	/* If empty then clear installed certificate */
-	if (new_cert[0] == '\0') { /* Clear installed certificate */
+	if ((buf[0] == '\0') || (buf[0] == '\n')) { /* Clear installed certificate */
-		kfree(new_cert);
-
 		/* Check that signature is set */
 		if (!setting->signature || !setting->signature[0])
 			return -EACCES;
@@ -763,14 +755,16 @@ static ssize_t certificate_store(struct kobject *kobj,
 
 		ret = tlmi_simple_call(LENOVO_CLEAR_BIOS_CERT_GUID, auth_str);
 		kfree(auth_str);
-		if (ret)
-			return ret;
 
-		kfree(setting->certificate);
+		return ret ?: count;
-		setting->certificate = NULL;
-		return count;
 	}
 
+	new_cert = kstrdup(buf, GFP_KERNEL);
+	if (!new_cert)
+		return -ENOMEM;
+	/* Strip out CR if one is present */
+	strip_cr(new_cert);
+
 	if (setting->cert_installed) {
 		/* Certificate is installed so this is an update */
 		if (!setting->signature || !setting->signature[0]) {
@@ -792,21 +786,14 @@ static ssize_t certificate_store(struct kobject *kobj,
 		auth_str = kasprintf(GFP_KERNEL, "%s,%s",
 				new_cert, setting->password);
 	}
-	if (!auth_str) {
+	kfree(new_cert);
-		kfree(new_cert);
+	if (!auth_str)
 		return -ENOMEM;
-	}
 
 	ret = tlmi_simple_call(guid, auth_str);
 	kfree(auth_str);
-	if (ret) {
-		kfree(new_cert);
-		return ret;
-	}
 
-	kfree(setting->certificate);
+	return ret ?: count;
-	setting->certificate = new_cert;
-	return count;
 }
 
 static struct kobj_attribute auth_certificate = __ATTR_WO(certificate);
@@ -1194,6 +1181,10 @@ static void tlmi_release_attr(void)
 
 	kset_unregister(tlmi_priv.attribute_kset);
 
+	/* Free up any saved signatures */
+	kfree(tlmi_priv.pwd_admin->signature);
+	kfree(tlmi_priv.pwd_admin->save_signature);
+
 	/* Authentication structures */
 	sysfs_remove_group(&tlmi_priv.pwd_admin->kobj, &auth_attr_group);
 	kobject_put(&tlmi_priv.pwd_admin->kobj);
@@ -1210,11 +1201,6 @@ static void tlmi_release_attr(void)
 	}
 
 	kset_unregister(tlmi_priv.authentication_kset);
-
-	/* Free up any saved certificates/signatures */
-	kfree(tlmi_priv.pwd_admin->certificate);
-	kfree(tlmi_priv.pwd_admin->signature);
-	kfree(tlmi_priv.pwd_admin->save_signature);
 }
 
 static int tlmi_sysfs_init(void)

drivers/platform/x86/think-lmi.h

@@ -63,7 +63,6 @@ struct tlmi_pwd_setting {
 	int index; /*Used for HDD and NVME auth */
 	enum level_option level;
 	bool cert_installed;
-	char *certificate;
 	char *signature;
 	char *save_signature;
 };